diff options
| author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-03-25 03:53:42 -0300 |
|---|---|---|
| committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-03-25 03:53:42 -0300 |
| commit | 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 (patch) | |
| tree | fa581f6dc1c0596391690d1f67eceef3af8246dc /arch/arm | |
| parent | d4e493caf788ef44982e131ff9c786546904d934 (diff) | |
Linux-libre 4.5-gnu
Diffstat (limited to 'arch/arm')
942 files changed, 25851 insertions, 9777 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 34e1569a1..4f799e567 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2,6 +2,7 @@ config ARM bool default y select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE + select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAVE_CUSTOM_GPIO_H @@ -20,6 +21,7 @@ config ARM select GENERIC_ALLOCATOR select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select GENERIC_EARLY_IOREMAP select GENERIC_IDLE_POLL_SETUP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW @@ -33,19 +35,20 @@ config ARM select HARDIRQS_SW_RESEND select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 - select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 - select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 + select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU + select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU + select HAVE_ARCH_MMAP_RND_BITS if MMU select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) select HAVE_ARCH_TRACEHOOK + select HAVE_ARM_SMCCC if CPU_V7 select HAVE_BPF_JIT select HAVE_CC_STACKPROTECTOR select HAVE_CONTEXT_TRACKING select HAVE_C_RECORDMCOUNT select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_API_DEBUG - select HAVE_DMA_ATTRS select HAVE_DMA_CONTIGUOUS if MMU - select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 + select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) @@ -164,11 +167,6 @@ config STACKTRACE_SUPPORT bool default y -config HAVE_LATENCYTOP_SUPPORT - bool - depends on !SMP - default y - config LOCKDEP_SUPPORT bool default y @@ -241,7 +239,6 @@ config ARM_PATCH_PHYS_VIRT bool "Patch physical to virtual translations at runtime" if EMBEDDED default y depends on !XIP_KERNEL && MMU - depends on !ARCH_REALVIEW || !SPARSEMEM help Patch phys-to-virt and virt-to-phys translation functions at boot and module load time according to the position of the @@ -308,13 +305,21 @@ config MMU Select if you want MMU-based virtualised addressing space support by paged memory management. If unsure, say 'Y'. +config ARCH_MMAP_RND_BITS_MIN + default 8 + +config ARCH_MMAP_RND_BITS_MAX + default 14 if PAGE_OFFSET=0x40000000 + default 15 if PAGE_OFFSET=0x80000000 + default 16 + # # The "ARM system type" choice list is ordered alphabetically by option # text. Please add new entries in the option alphabetic order. # choice prompt "ARM system type" - default ARCH_VERSATILE if !MMU + default ARM_SINGLE_ARMV7M if !MMU default ARCH_MULTIPLATFORM if MMU config ARCH_MULTIPLATFORM @@ -346,38 +351,6 @@ config ARM_SINGLE_ARMV7M select SPARSE_IRQ select USE_OF -config ARCH_REALVIEW - bool "ARM Ltd. RealView family" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_AMBA - select ARM_TIMER_SP804 - select COMMON_CLK - select COMMON_CLK_VERSATILE - select GENERIC_CLOCKEVENTS - select GPIO_PL061 if GPIOLIB - select ICST - select NEED_MACH_MEMORY_H - select PLAT_VERSATILE - select PLAT_VERSATILE_SCHED_CLOCK - help - This enables support for ARM Ltd RealView boards. - -config ARCH_VERSATILE - bool "ARM Ltd. Versatile family" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_AMBA - select ARM_TIMER_SP804 - select ARM_VIC - select CLKDEV_LOOKUP - select GENERIC_CLOCKEVENTS - select HAVE_MACH_CLKDEV - select ICST - select PLAT_VERSATILE - select PLAT_VERSATILE_CLOCK - select PLAT_VERSATILE_SCHED_CLOCK - select VERSATILE_FPGA_IRQ - help - This enables support for ARM Ltd Versatile board. config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" @@ -512,55 +485,15 @@ config ARCH_DOVE select CPU_PJ4 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI + select MULTI_IRQ_HANDLER select MVEBU_MBUS select PINCTRL select PINCTRL_DOVE select PLAT_ORION_LEGACY - help - Support for the Marvell Dove SoC 88AP510 - -config ARCH_MV78XX0 - bool "Marvell MV78xx0" - select ARCH_REQUIRE_GPIOLIB - select CPU_FEROCEON - select GENERIC_CLOCKEVENTS - select MVEBU_MBUS - select PCI - select PLAT_ORION_LEGACY - help - Support for the following Marvell MV78xx0 series SoCs: - MV781x0, MV782x0. - -config ARCH_ORION5X - bool "Marvell Orion" - depends on MMU - select ARCH_REQUIRE_GPIOLIB - select CPU_FEROCEON - select GENERIC_CLOCKEVENTS - select MVEBU_MBUS - select PCI - select PLAT_ORION_LEGACY - select MULTI_IRQ_HANDLER - help - Support for the following Marvell Orion 5x series SoCs: - Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), - Orion-2 (5281), Orion-1-90 (6183). - -config ARCH_MMP - bool "Marvell PXA168/910/MMP2" - depends on MMU - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select GENERIC_ALLOCATOR - select GENERIC_CLOCKEVENTS - select GPIO_PXA - select IRQ_DOMAIN - select MULTI_IRQ_HANDLER - select PINCTRL - select PLAT_PXA select SPARSE_IRQ + select PM_GENERIC_DOMAINS if PM help - Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. + Support for the Marvell Dove SoC 88AP510 config ARCH_KS8695 bool "Micrel/Kendin KS8695" @@ -611,6 +544,7 @@ config ARCH_PXA select AUTO_ZRELADDR select COMMON_CLK select CLKDEV_LOOKUP + select CLKSRC_PXA select CLKSRC_MMIO select CLKSRC_OF select GENERIC_CLOCKEVENTS @@ -650,6 +584,8 @@ config ARCH_SA1100 select ARCH_SPARSEMEM_ENABLE select CLKDEV_LOOKUP select CLKSRC_MMIO + select CLKSRC_PXA + select CLKSRC_OF if OF select CPU_FREQ select CPU_SA1100 select GENERIC_CLOCKEVENTS @@ -682,32 +618,6 @@ config ARCH_S3C24XX (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the Samsung SMDK2410 development board (and derivatives). -config ARCH_S3C64XX - bool "Samsung S3C64XX" - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select ARM_VIC - select ATAGS - select CLKDEV_LOOKUP - select CLKSRC_SAMSUNG_PWM - select COMMON_CLK_SAMSUNG - select CPU_V6K - select GENERIC_CLOCKEVENTS - select GPIO_SAMSUNG - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_TCM - select NO_IOPORT_MAP - select PLAT_SAMSUNG - select PM_GENERIC_DOMAINS if PM - select S3C_DEV_NAND - select S3C_GPIO_TRACK - select SAMSUNG_ATAGS - select SAMSUNG_WAKEMASK - select SAMSUNG_WDT_RESET - help - Samsung S3C64XX series based systems - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -796,9 +706,11 @@ config ARCH_MULTI_CPU_AUTO endmenu config ARCH_VIRT - bool "Dummy Virtual Machine" if ARCH_MULTI_V7 + bool "Dummy Virtual Machine" + depends on ARCH_MULTI_V7 select ARM_AMBA select ARM_GIC + select ARM_GIC_V2M if PCI_MSI select ARM_GIC_V3 select ARM_PSCI select HAVE_ARM_ARCH_TIMER @@ -918,6 +830,8 @@ source "arch/arm/mach-sunxi/Kconfig" source "arch/arm/mach-prima2/Kconfig" +source "arch/arm/mach-tango/Kconfig" + source "arch/arm/mach-tegra/Kconfig" source "arch/arm/mach-u300/Kconfig" @@ -1422,7 +1336,7 @@ config BIG_LITTLE config BL_SWITCHER bool "big.LITTLE switcher support" - depends on BIG_LITTLE && MCPM && HOTPLUG_CPU + depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC select ARM_CPU_SUSPEND select CPU_PM help @@ -1481,7 +1395,7 @@ config HOTPLUG_CPU config ARM_PSCI bool "Support for the ARM Power State Coordination Interface (PSCI)" - depends on CPU_V7 + depends on HAVE_ARM_SMCCC select ARM_PSCI_FW help Say Y here if you want Linux to communicate with system firmware @@ -1604,6 +1518,24 @@ config THUMB2_AVOID_R_ARM_THM_JUMP11 config ARM_ASM_UNIFIED bool +config ARM_PATCH_IDIV + bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()" + depends on CPU_32v7 && !XIP_KERNEL + default y + help + The ARM compiler inserts calls to __aeabi_idiv() and + __aeabi_uidiv() when it needs to perform division on signed + and unsigned integers. Some v7 CPUs have support for the sdiv + and udiv instructions that can be used to implement those + functions. + + Enabling this option allows the kernel to modify itself to + replace the first two instructions of these library functions + with the sdiv or udiv plus "bx lr" instructions when the CPU + it is running on supports them. Typically this will be faster + and less power intensive than running the original library + code to do integer division. + config AEABI bool "Use the ARM EABI to compile the kernel" help @@ -1800,6 +1732,25 @@ config SWIOTLB config IOMMU_HELPER def_bool SWIOTLB +config PARAVIRT + bool "Enable paravirtualization code" + help + This changes the kernel so it can modify itself when it is run + under a hypervisor, potentially improving performance significantly + over full virtualization. + +config PARAVIRT_TIME_ACCOUNTING + bool "Paravirtual steal time accounting" + select PARAVIRT + default n + help + Select this option to enable fine granularity task steal time + accounting. Time spent executing other tasks in parallel with + the current vCPU is discounted from the vCPU power. To account for + that, there can be a small performance impact. + + If in doubt, say N here. + config XEN_DOM0 def_bool y depends on XEN @@ -1813,6 +1764,7 @@ config XEN select ARCH_DMA_ADDR_T_64BIT select ARM_PSCI select SWIOTLB_XEN + select PARAVIRT help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. @@ -2040,6 +1992,25 @@ config AUTO_ZRELADDR 0xf8000000. This assumes the zImage being placed in the first 128MB from start of memory. +config EFI_STUB + bool + +config EFI + bool "UEFI runtime support" + depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL + select UCS2_STRING + select EFI_PARAMS_FROM_FDT + select EFI_STUB + select EFI_ARMSTUB + select EFI_RUNTIME_WRAPPERS + ---help--- + This option provides support for runtime services provided + by UEFI firmware (such as non-volatile variables, realtime + clock, and platform reset). A UEFI stub is also provided to + allow the kernel to be booted as an EFI application. This + is only useful for kernels that may run on systems that have + UEFI firmware. + endmenu menu "CPU Power Management" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index ddbb36126..c6b6175d0 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -15,20 +15,6 @@ config ARM_PTDUMP kernel. If in doubt, say "N" -config STRICT_DEVMEM - bool "Filter access to /dev/mem" - depends on MMU - ---help--- - If this option is disabled, you allow userspace (root) access to all - of memory, including kernel and userspace memory. Accidental - access to this is obviously disastrous, but specific access can - be used by people debugging the kernel. - - If this option is switched on, the /dev/mem file only allows - userspace access to memory mapped peripherals. - - If in doubt, say Y. - # RMK wants arm kernels compiled with frame pointers or stack unwinding. # If you know what you are doing and are willing to live without stack # traces, you can get a slightly smaller kernel by setting this option to @@ -143,7 +129,12 @@ choice config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" - depends on ARCH_BCM2835 + depends on ARCH_BCM2835 && ARCH_MULTI_V6 + select DEBUG_UART_PL01X + + config DEBUG_BCM2836 + bool "Kernel low-level debugging on BCM2836 PL011 UART" + depends on ARCH_BCM2835 && ARCH_MULTI_V7 select DEBUG_UART_PL01X config DEBUG_BCM_5301X @@ -231,23 +222,6 @@ choice Say Y here if you want the debug print routines to direct their output to UART0 serial port on DaVinci DMx devices. - config DEBUG_ZYNQ_UART0 - bool "Kernel low-level debugging on Xilinx Zynq using UART0" - depends on ARCH_ZYNQ - help - Say Y here if you want the debug print routines to direct - their output to UART0 on the Zynq platform. - - config DEBUG_ZYNQ_UART1 - bool "Kernel low-level debugging on Xilinx Zynq using UART1" - depends on ARCH_ZYNQ - help - Say Y here if you want the debug print routines to direct - their output to UART1 on the Zynq platform. - - If you have a ZC702 board and want early boot messages to - appear on the USB serial adaptor, select this option. - config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on FOOTBRIDGE @@ -262,13 +236,30 @@ choice Say Y here if you want the debug print routines to direct their output to the UA0 serial port in the CX92755. + config DEBUG_EP93XX + bool "Kernel low-level debugging messages via ep93xx UART" + depends on ARCH_EP93XX + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on Cirrus Logic EP93xx based platforms. + config DEBUG_FOOTBRIDGE_COM1 bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" depends on FOOTBRIDGE + select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to the 8250 at PCI COM1. + config DEBUG_GEMINI + bool "Kernel low-level debugging messages via Cortina Systems Gemini UART" + depends on ARCH_GEMINI + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Cortina Gemini based platforms. + config DEBUG_HI3620_UART bool "Hisilicon HI3620 Debug UART" depends on ARCH_HI3xxx @@ -424,6 +415,14 @@ choice Say Y here if you want kernel low-level debugging support on i.MX7D. + config DEBUG_INTEGRATOR + bool "Kernel low-level debugging messages via ARM Integrator UART" + depends on ARCH_INTEGRATOR + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on ARM Integrator platforms. + config DEBUG_KEYSTONE_UART0 bool "Kernel low-level debugging on KEYSTONE2 using UART0" depends on ARCH_KEYSTONE @@ -455,6 +454,14 @@ choice Say Y here if you want kernel low-level debugging support on NXP LPC18xx/43xx UART0. + config DEBUG_LPC32XX + bool "Kernel low-level debugging messages via NXP LPC32xx UART" + depends on ARCH_LPC32XX + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on NXP LPC32xx based platforms. + config DEBUG_MESON_UARTAO bool "Kernel low-level debugging via Meson6 UARTAO" depends on ARCH_MESON @@ -478,26 +485,10 @@ choice Say Y here if you want kernel low-level debugging support on MMP UART3. - config DEBUG_QCOM_UARTDM - bool "Kernel low-level debugging messages via QCOM UARTDM" - depends on ARCH_QCOM - help - Say Y here if you want the debug print routines to direct - their output to the serial port on Qualcomm devices. - - ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT - APQ8064 0x16640000 0xf0040000 - APQ8084 0xf995e000 0xfa75e000 - MSM8X60 0x19c40000 0xf0040000 - MSM8960 0x16440000 0xf0040000 - MSM8974 0xf991e000 0xfa71e000 - - Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration - options based on your needs. - config DEBUG_MVEBU_UART0 bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)" depends on ARCH_MVEBU + depends on ARCH_MVEBU && CPU_V7 select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support @@ -510,17 +501,23 @@ choice Plathome OpenBlocks AX3, when using the original bootloader. + This option will not work on older Marvell platforms + (Kirkwood, Dove, MV78xx0, Orion5x), which should pick + the "new bootloader" variant. + If the wrong DEBUG_MVEBU_UART* option is selected, when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. config DEBUG_MVEBU_UART0_ALTERNATE bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)" - depends on ARCH_MVEBU + depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on MVEBU based platforms on UART0. + on MVEBU based platforms on UART0. (Armada XP, Armada 3xx, + Kirkwood, Dove, MV78xx0, Orion5x). + This option should be used with the new bootloaders that remap the internal registers at 0xf1000000. @@ -535,21 +532,41 @@ choice select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on MVEBU based platforms on UART1. + on MVEBU based platforms on UART1. (Armada XP, Armada 3xx, + Kirkwood, Dove, MV78xx0, Orion5x). This option should be used with the new bootloaders that remap the internal registers at 0xf1000000. + All of the older (pre Armada XP/370) platforms also use + this address, regardless of the boot loader version. If the wrong DEBUG_MVEBU_UART* option is selected, when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. - config DEBUG_VF_UART - bool "Vybrid UART" - depends on SOC_VF610 + config DEBUG_MT6589_UART0 + bool "Mediatek mt6589 UART0" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on Vybrid based platforms. + for Mediatek mt6589 based platforms on UART0. + + config DEBUG_MT8127_UART0 + bool "Mediatek mt8127/mt6592 UART0" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8127 based platforms on UART0. + + config DEBUG_MT8135_UART3 + bool "Mediatek mt8135 UART3" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8135 based platforms on UART3. config DEBUG_NETX_UART bool "Kernel low-level debugging messages via NetX UART" @@ -713,6 +730,23 @@ choice Say Y here if you want kernel low-level debugging support on PXA UART1. + config DEBUG_QCOM_UARTDM + bool "Kernel low-level debugging messages via QCOM UARTDM" + depends on ARCH_QCOM + help + Say Y here if you want the debug print routines to direct + their output to the serial port on Qualcomm devices. + + ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT + APQ8064 0x16640000 0xf0040000 + APQ8084 0xf995e000 0xfa75e000 + MSM8X60 0x19c40000 0xf0040000 + MSM8960 0x16440000 0xf0040000 + MSM8974 0xf991e000 0xfa71e000 + + Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration + options based on your needs. + config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW @@ -856,6 +890,7 @@ choice depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX + select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 0 for low-level debug" help @@ -867,6 +902,7 @@ choice depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX + select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 1 for low-level debug" help @@ -878,6 +914,7 @@ choice depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX + select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 2 for low-level debug" help @@ -888,6 +925,7 @@ choice config DEBUG_S3C_UART3 depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210) select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 3 for low-level debug" help @@ -979,6 +1017,70 @@ choice Say Y here if you want kernel low-level debugging support on Allwinner A31/A23 based platforms on the R_UART. + config DEBUG_SIRFPRIMA2_UART1 + bool "Kernel low-level debugging messages via SiRFprimaII UART1" + depends on ARCH_PRIMA2 + select DEBUG_SIRFSOC_UART + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFprimaII devices. + + config DEBUG_SIRFATLAS7_UART0 + bool "Kernel low-level debugging messages via SiRFatlas7 UART0" + depends on ARCH_ATLAS7 + select DEBUG_SIRFSOC_UART + help + Say Y here if you want the debug print routines to direct + their output to the uart0 port on SiRFATLAS7 devices.The uart0 + is used on SiRFATLAS7 as a extra debug port.sometimes an extra + debug port can be very useful. + + config DEBUG_SIRFATLAS7_UART1 + bool "Kernel low-level debugging messages via SiRFatlas7 UART1" + depends on ARCH_ATLAS7 + select DEBUG_SIRFSOC_UART + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFATLAS7 devices. + + config DEBUG_SPEAR3XX + bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART" + depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on ST SPEAr based platforms. + + config DEBUG_SPEAR13XX + bool "Kernel low-level debugging messages via ST SPEAr 13xx UART" + depends on ARCH_SPEAR13XX + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on ST SPEAr13xx based platforms. + + config STIH41X_DEBUG_ASC2 + bool "Use StiH415/416 ASC2 UART for low-level debug" + depends on ARCH_STI + select DEBUG_STI_UART + help + Say Y here if you want kernel low-level debugging support + on STiH415/416 based platforms like b2000, which has + default UART wired up to ASC2. + + If unsure, say N. + + config STIH41X_DEBUG_SBC_ASC1 + bool "Use StiH415/416 SBC ASC1 UART for low-level debug" + depends on ARCH_STI + select DEBUG_STI_UART + help + Say Y here if you want kernel low-level debugging support + on STiH415/416 based platforms like b2020. which has + default UART wired up to SBC ASC1. + + If unsure, say N. + config TEGRA_DEBUG_UART_AUTO_ODMDATA bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" depends on ARCH_TEGRA @@ -1031,54 +1133,6 @@ choice Say Y here if you want kernel low-level debugging support on Tegra based platforms. - config DEBUG_SIRFPRIMA2_UART1 - bool "Kernel low-level debugging messages via SiRFprimaII UART1" - depends on ARCH_PRIMA2 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFprimaII devices. - - config DEBUG_SIRFATLAS7_UART0 - bool "Kernel low-level debugging messages via SiRFatlas7 UART0" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart0 port on SiRFATLAS7 devices.The uart0 - is used on SiRFATLAS7 as a extra debug port.sometimes an extra - debug port can be very useful. - - config DEBUG_SIRFATLAS7_UART1 - bool "Kernel low-level debugging messages via SiRFatlas7 UART1" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFATLAS7 devices. - - config STIH41X_DEBUG_ASC2 - bool "Use StiH415/416 ASC2 UART for low-level debug" - depends on ARCH_STI - select DEBUG_STI_UART - help - Say Y here if you want kernel low-level debugging support - on STiH415/416 based platforms like b2000, which has - default UART wired up to ASC2. - - If unsure, say N. - - config STIH41X_DEBUG_SBC_ASC1 - bool "Use StiH415/416 SBC ASC1 UART for low-level debug" - depends on ARCH_STI - select DEBUG_STI_UART - help - Say Y here if you want kernel low-level debugging support - on STiH415/416 based platforms like b2020. which has - default UART wired up to SBC ASC1. - - If unsure, say N. - config DEBUG_U300_UART bool "Kernel low-level debugging messages via U300 UART0" depends on ARCH_U300 @@ -1094,29 +1148,13 @@ choice Say Y here if you want kernel low-level debugging support on Ux500 based platforms. - config DEBUG_MT6589_UART0 - bool "Mediatek mt6589 UART0" - depends on ARCH_MEDIATEK - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - for Mediatek mt6589 based platforms on UART0. - - config DEBUG_MT8127_UART0 - bool "Mediatek mt8127/mt6592 UART0" - depends on ARCH_MEDIATEK - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - for Mediatek mt8127 based platforms on UART0. - - config DEBUG_MT8135_UART3 - bool "Mediatek mt8135 UART3" - depends on ARCH_MEDIATEK - select DEBUG_UART_8250 + config DEBUG_VERSATILE + bool "Kernel low-level debugging messages via ARM Versatile UART" + depends on ARCH_VERSATILE + select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support - for Mediatek mt8135 based platforms on UART3. + on ARM Versatile platforms. config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" @@ -1154,6 +1192,13 @@ choice This option selects UART0 at 0xb0090000. This is appropriate for Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7 + config DEBUG_VF_UART + bool "Vybrid UART" + depends on SOC_VF610 + help + Say Y here if you want kernel low-level debugging support + on Vybrid based platforms. + config DEBUG_VT8500_UART0 bool "Use UART0 on VIA/Wondermedia SoCs" depends on ARCH_VT8500 @@ -1161,6 +1206,35 @@ choice This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. + config DEBUG_ZTE_ZX + bool "Use ZTE ZX UART" + select DEBUG_UART_PL01X + depends on ARCH_ZX + help + Say Y here if you are enabling ZTE ZX296702 SOC and need + debug uart support. + + This option is preferred over the platform specific + options; the platform specific options are deprecated + and will be soon removed. + + config DEBUG_ZYNQ_UART0 + bool "Kernel low-level debugging on Xilinx Zynq using UART0" + depends on ARCH_ZYNQ + help + Say Y here if you want the debug print routines to direct + their output to UART0 on the Zynq platform. + + config DEBUG_ZYNQ_UART1 + bool "Kernel low-level debugging on Xilinx Zynq using UART1" + depends on ARCH_ZYNQ + help + Say Y here if you want the debug print routines to direct + their output to UART1 on the Zynq platform. + + If you have a ZC702 board and want early boot messages to + appear on the USB serial adaptor, select this option. + config DEBUG_ICEDCC bool "Kernel low-level debugging via EmbeddedICE DCC channel" help @@ -1188,18 +1262,6 @@ choice For more details about semihosting, please see chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. - config DEBUG_ZTE_ZX - bool "Use ZTE ZX UART" - select DEBUG_UART_PL01X - depends on ARCH_ZX - help - Say Y here if you are enabling ZTE ZX296702 SOC and need - debug uart support. - - This option is preferred over the platform specific - options; the platform specific options are deprecated - and will be soon removed. - config DEBUG_LL_UART_8250 bool "Kernel low-level debugging via 8250 UART" help @@ -1252,6 +1314,9 @@ config DEBUG_S3C2410_UART config DEBUG_S3C24XX_UART bool +config DEBUG_S3C64XX_UART + bool + config DEBUG_S5PV210_UART bool @@ -1307,6 +1372,7 @@ config DEBUG_LL_INCLUDE default "debug/at91.S" if DEBUG_AT91_UART default "debug/asm9260.S" if DEBUG_ASM9260_UART default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 + default "debug/dc21285.S" if DEBUG_DC21285_PORT default "debug/meson.S" if DEBUG_MESON_UARTAO default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART @@ -1337,7 +1403,7 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 - default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART + default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sirf.S" if DEBUG_SIRFSOC_UART default "debug/sti.S" if DEBUG_STI_UART @@ -1357,11 +1423,9 @@ config DEBUG_UART_PL01X # Compatibility options for 8250 config DEBUG_UART_8250 - def_bool ARCH_DOVE || ARCH_EBSA110 || \ - (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ - ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \ - ARCH_IOP33X || ARCH_IXP4XX || \ - ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC + def_bool ARCH_EBSA110 || \ + ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \ + ARCH_RPC config DEBUG_UART_PHYS hex "Physical base address of debug UART" @@ -1382,12 +1446,12 @@ config DEBUG_UART_PHYS default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT default 0x10124000 if DEBUG_RK3X_UART0 default 0x10126000 if DEBUG_RK3X_UART1 - default 0x101f1000 if ARCH_VERSATILE + default 0x101f1000 if DEBUG_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART default 0x11002000 if DEBUG_MT8127_UART0 default 0x11006000 if DEBUG_MT6589_UART0 default 0x11009000 if DEBUG_MT8135_UART3 - default 0x16000000 if ARCH_INTEGRATOR + default 0x16000000 if DEBUG_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X default 0x18010000 if DEBUG_SIRFATLAS7_UART0 default 0x18020000 if DEBUG_SIRFATLAS7_UART1 @@ -1397,12 +1461,13 @@ config DEBUG_UART_PHYS default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0x20201000 if DEBUG_BCM2835 + default 0x3f201000 if DEBUG_BCM2836 default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x4000e400 if DEBUG_LL_UART_EFM32 default 0x40081000 if DEBUG_LPC18XX_UART0 - default 0x40090000 if ARCH_LPC32XX + default 0x40090000 if DEBUG_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 - default 0x42000000 if ARCH_GEMINI + default 0x42000000 if DEBUG_GEMINI default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ DEBUG_S3C2410_UART0) default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ @@ -1410,24 +1475,28 @@ config DEBUG_UART_PHYS default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ DEBUG_S3C2410_UART2) default 0x78000000 if DEBUG_CNS3XXX - default 0x7c0003f8 if FOOTBRIDGE + default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1 + default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 + default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 + default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 + default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 default 0x80010000 if DEBUG_ASM9260_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART default 0x80230000 if DEBUG_PICOXCELL_UART - default 0x808c0000 if ARCH_EP93XX + default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN - default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX + default 0xd0000000 if DEBUG_SPEAR3XX default 0xd0012000 if DEBUG_MVEBU_UART0 default 0xc81004c0 if DEBUG_MESON_UARTAO default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 - default 0xe0000000 if ARCH_SPEAR13XX + default 0xe0000000 if DEBUG_SPEAR13XX default 0xe4007000 if DEBUG_HIP04_UART default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 @@ -1439,8 +1508,6 @@ config DEBUG_UART_PHYS default 0xf040ab00 if DEBUG_BRCMSTB_UART default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE - default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ - ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8b00000 if DEBUG_HIX5HD2_UART default 0xf991e000 if DEBUG_QCOM_UARTDM @@ -1469,6 +1536,7 @@ config DEBUG_UART_PHYS DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ + DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ DEBUG_AT91_UART @@ -1480,22 +1548,27 @@ config DEBUG_UART_VIRT default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART default 0xf01fb000 if DEBUG_NOMADIK_UART - default 0xf0201000 if DEBUG_BCM2835 + default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 default 0xf1000300 if DEBUG_BCM_5301X default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 default 0xf1009000 if DEBUG_MT8135_UART3 - default 0xf11f1000 if ARCH_VERSATILE - default 0xf1600000 if ARCH_INTEGRATOR + default 0xf11f1000 if DEBUG_VERSATILE + default 0xf1600000 if DEBUG_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 default 0xf1c28400 if DEBUG_SUNXI_UART1 default 0xf1f02800 if DEBUG_SUNXI_R_UART + default 0xf31004c0 if DEBUG_MESON_UARTAO + default 0xf4090000 if DEBUG_LPC32XX + default 0xf4200000 if DEBUG_GEMINI default 0xf6200000 if DEBUG_PXA_UART1 - default 0xf4090000 if ARCH_LPC32XX - default 0xf4200000 if ARCH_GEMINI default 0xf7000000 if DEBUG_SUN9I_UART0 + default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ DEBUG_S3C2410_UART0) + default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 + default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 + default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ DEBUG_S3C2410_UART1) default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ @@ -1511,13 +1584,11 @@ config DEBUG_UART_VIRT default 0xfc40ab00 if DEBUG_BRCMSTB_UART default 0xfc705000 if DEBUG_ZTE_ZX default 0xfcfe8600 if DEBUG_BCM63XX_UART - default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX - default 0xfd000000 if ARCH_SPEAR13XX - default 0xfd012000 if ARCH_MV78XX0 + default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX + default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0 default 0xfd883000 if DEBUG_ALPINE_UART0 - default 0xfde12000 if ARCH_DOVE - default 0xfe012000 if ARCH_ORION5X - default 0xf31004c0 if DEBUG_MESON_UARTAO + default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE + default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART @@ -1531,7 +1602,7 @@ config DEBUG_UART_VIRT default 0xfeb31000 if DEBUG_KEYSTONE_UART1 default 0xfec02000 if DEBUG_SOCFPGA_UART0 default 0xfec02100 if DEBUG_SOCFPGA_UART1 - default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE + default 0xfec12000 if (DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE) && ARCH_MVEBU default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 @@ -1543,8 +1614,8 @@ config DEBUG_UART_VIRT default 0xfed60000 if DEBUG_RK29_UART0 default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 - default 0xfedc0000 if ARCH_EP93XX - default 0xfee003f8 if FOOTBRIDGE + default 0xfedc0000 if DEBUG_EP93XX + default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1 default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xfee82340 if ARCH_IOP13XX default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN @@ -1561,13 +1632,14 @@ config DEBUG_UART_VIRT DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X || \ + default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3 default 2 @@ -1575,8 +1647,9 @@ config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 - default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \ - DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \ + default y if DEBUG_PICOXCELL_UART || \ + DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_UART1 || \ + DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \ DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ @@ -1586,7 +1659,7 @@ config DEBUG_UART_8250_WORD config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC + default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC config DEBUG_UNCOMPRESS bool diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 2c2b28ee4..fe254108d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -30,9 +30,8 @@ GZFLAGS :=-9 # Never generate .eh_frame KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) -# Do not use arch/arm/defconfig - it's always outdated. -# Select a platform tht is kept up-to-date -KBUILD_DEFCONFIG := versatile_defconfig +# This should work on most of the modern platforms +KBUILD_DEFCONFIG := multi_v7_defconfig # defines filename extension depending memory management type. ifeq ($(CONFIG_MMU),) @@ -211,6 +210,7 @@ machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_ARCH_STI) += sti machine-$(CONFIG_ARCH_STM32) += stm32 machine-$(CONFIG_ARCH_SUNXI) += sunxi +machine-$(CONFIG_ARCH_TANGO) += tango machine-$(CONFIG_ARCH_TEGRA) += tegra machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 3f9a9ebc7..43788b1a1 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -106,6 +106,15 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif +# -fstack-protector-strong triggers protection checks in this code, +# but it is being used too early to link to meaningful stack_chk logic. +nossp_flags := $(call cc-option, -fno-stack-protector) +CFLAGS_atags_to_fdt.o := $(nossp_flags) +CFLAGS_fdt.o := $(nossp_flags) +CFLAGS_fdt_ro.o := $(nossp_flags) +CFLAGS_fdt_rw.o := $(nossp_flags) +CFLAGS_fdt_wip.o := $(nossp_flags) + ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) asflags-y := -DZIMAGE @@ -167,9 +176,11 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \ false; \ fi +efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a + $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \ - $(bswapsdi2) FORCE + $(bswapsdi2) $(efi-obj-y) FORCE @$(check_for_multiple_zreladdr) $(call if_changed,ld) @$(check_for_bad_syms) @@ -184,5 +195,7 @@ CFLAGS_font.o := -Dstatic= $(obj)/font.c: $(FONTC) $(call cmd,shipped) +AFLAGS_hyp-stub.o := -Wa,-march=armv7-a + $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S $(call cmd,shipped) diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S new file mode 100644 index 000000000..9d5dc4fda --- /dev/null +++ b/arch/arm/boot/compressed/efi-header.S @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2013-2015 Linaro Ltd + * Authors: Roy Franz <roy.franz@linaro.org> + * Ard Biesheuvel <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + .macro __nop +#ifdef CONFIG_EFI_STUB + @ This is almost but not quite a NOP, since it does clobber the + @ condition flags. But it is the best we can do for EFI, since + @ PE/COFF expects the magic string "MZ" at offset 0, while the + @ ARM/Linux boot protocol expects an executable instruction + @ there. + .inst 'M' | ('Z' << 8) | (0x1310 << 16) @ tstne r0, #0x4d000 +#else + mov r0, r0 +#endif + .endm + + .macro __EFI_HEADER +#ifdef CONFIG_EFI_STUB + b __efi_start + + .set start_offset, __efi_start - start + .org start + 0x3c + @ + @ The PE header can be anywhere in the file, but for + @ simplicity we keep it together with the MSDOS header + @ The offset to the PE/COFF header needs to be at offset + @ 0x3C in the MSDOS header. + @ The only 2 fields of the MSDOS header that are used are this + @ PE/COFF offset, and the "MZ" bytes at offset 0x0. + @ + .long pe_header - start @ Offset to the PE header. + +pe_header: + .ascii "PE\0\0" + +coff_header: + .short 0x01c2 @ ARM or Thumb + .short 2 @ nr_sections + .long 0 @ TimeDateStamp + .long 0 @ PointerToSymbolTable + .long 1 @ NumberOfSymbols + .short section_table - optional_header + @ SizeOfOptionalHeader + .short 0x306 @ Characteristics. + @ IMAGE_FILE_32BIT_MACHINE | + @ IMAGE_FILE_DEBUG_STRIPPED | + @ IMAGE_FILE_EXECUTABLE_IMAGE | + @ IMAGE_FILE_LINE_NUMS_STRIPPED + +optional_header: + .short 0x10b @ PE32 format + .byte 0x02 @ MajorLinkerVersion + .byte 0x14 @ MinorLinkerVersion + .long _end - __efi_start @ SizeOfCode + .long 0 @ SizeOfInitializedData + .long 0 @ SizeOfUninitializedData + .long efi_stub_entry - start @ AddressOfEntryPoint + .long start_offset @ BaseOfCode + .long 0 @ data + +extra_header_fields: + .long 0 @ ImageBase + .long 0x200 @ SectionAlignment + .long 0x200 @ FileAlignment + .short 0 @ MajorOperatingSystemVersion + .short 0 @ MinorOperatingSystemVersion + .short 0 @ MajorImageVersion + .short 0 @ MinorImageVersion + .short 0 @ MajorSubsystemVersion + .short 0 @ MinorSubsystemVersion + .long 0 @ Win32VersionValue + + .long _end - start @ SizeOfImage + .long start_offset @ SizeOfHeaders + .long 0 @ CheckSum + .short 0xa @ Subsystem (EFI application) + .short 0 @ DllCharacteristics + .long 0 @ SizeOfStackReserve + .long 0 @ SizeOfStackCommit + .long 0 @ SizeOfHeapReserve + .long 0 @ SizeOfHeapCommit + .long 0 @ LoaderFlags + .long 0x6 @ NumberOfRvaAndSizes + + .quad 0 @ ExportTable + .quad 0 @ ImportTable + .quad 0 @ ResourceTable + .quad 0 @ ExceptionTable + .quad 0 @ CertificationTable + .quad 0 @ BaseRelocationTable + +section_table: + @ + @ The EFI application loader requires a relocation section + @ because EFI applications must be relocatable. This is a + @ dummy section as far as we are concerned. + @ + .ascii ".reloc\0\0" + .long 0 @ VirtualSize + .long 0 @ VirtualAddress + .long 0 @ SizeOfRawData + .long 0 @ PointerToRawData + .long 0 @ PointerToRelocations + .long 0 @ PointerToLineNumbers + .short 0 @ NumberOfRelocations + .short 0 @ NumberOfLineNumbers + .long 0x42100040 @ Characteristics + + .ascii ".text\0\0\0" + .long _end - __efi_start @ VirtualSize + .long __efi_start @ VirtualAddress + .long _edata - __efi_start @ SizeOfRawData + .long __efi_start @ PointerToRawData + .long 0 @ PointerToRelocations + .long 0 @ PointerToLineNumbers + .short 0 @ NumberOfRelocations + .short 0 @ NumberOfLineNumbers + .long 0xe0500020 @ Characteristics + + .align 9 +__efi_start: +#endif + .endm diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 06e983f59..af11c2f8f 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -12,6 +12,8 @@ #include <asm/assembler.h> #include <asm/v7m.h> +#include "efi-header.S" + AR_CLASS( .arch armv7-a ) M_CLASS( .arch armv7-m ) @@ -126,7 +128,7 @@ start: .type start,#function .rept 7 - mov r0, r0 + __nop .endr ARM( mov r0, r0 ) ARM( b 1f ) @@ -139,7 +141,8 @@ start: .word 0x04030201 @ endianness flag THUMB( .thumb ) -1: +1: __EFI_HEADER + ARM_BE8( setend be ) @ go BE8 if compiled for BE8 AR_CLASS( mrs r9, cpsr ) #ifdef CONFIG_ARM_VIRT_EXT @@ -1353,6 +1356,53 @@ __enter_kernel: reloc_code_end: +#ifdef CONFIG_EFI_STUB + .align 2 +_start: .long start - . + +ENTRY(efi_stub_entry) + @ allocate space on stack for passing current zImage address + @ and for the EFI stub to return of new entry point of + @ zImage, as EFI stub may copy the kernel. Pointer address + @ is passed in r2. r0 and r1 are passed through from the + @ EFI firmware to efi_entry + adr ip, _start + ldr r3, [ip] + add r3, r3, ip + stmfd sp!, {r3, lr} + mov r2, sp @ pass zImage address in r2 + bl efi_entry + + @ Check for error return from EFI stub. r0 has FDT address + @ or error code. + cmn r0, #1 + beq efi_load_fail + + @ Preserve return value of efi_entry() in r4 + mov r4, r0 + bl cache_clean_flush + bl cache_off + + @ Set parameters for booting zImage according to boot protocol + @ put FDT address in r2, it was returned by efi_entry() + @ r1 is the machine type, and r0 needs to be 0 + mov r0, #0 + mov r1, #0xFFFFFFFF + mov r2, r4 + + @ Branch to (possibly) relocated zImage that is in [sp] + ldr lr, [sp] + ldr ip, =start_offset + add lr, lr, ip + mov pc, lr @ no mode switch + +efi_load_fail: + @ Return EFI_LOAD_ERROR to EFI firmware on error. + ldr r0, =0x80000001 + ldmfd sp!, {ip, pc} +ENDPROC(efi_stub_entry) +#endif + .align .section ".stack", "aw", %nobits .L_user_stack: .space 4096 diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index 2b60b843a..81c493156 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -48,6 +48,13 @@ SECTIONS *(.rodata) *(.rodata.*) } + .data : { + /* + * The EFI stub always executes from RAM, and runs strictly before the + * decompressor, so we can make an exception for its r/w data, and keep it + */ + *(.data.efistub) + } .piggydata : { *(.piggydata) } diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 30bbc3746..a4a6d70e8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -48,8 +48,10 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ sama5d34ek.dtb \ sama5d35ek.dtb \ sama5d36ek.dtb \ + at91-sama5d4_ma5d4evk.dtb \ at91-sama5d4_xplained.dtb \ - at91-sama5d4ek.dtb + at91-sama5d4ek.dtb \ + at91-vinco.dtb dtb-$(CONFIG_ARCH_ATLAS6) += \ atlas6-evb.dtb dtb-$(CONFIG_ARCH_ATLAS7) += \ @@ -60,7 +62,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b.dtb \ bcm2835-rpi-b-rev2.dtb \ bcm2835-rpi-b-plus.dtb \ - bcm2835-rpi-a-plus.dtb + bcm2835-rpi-a-plus.dtb \ + bcm2836-rpi-2-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ @@ -75,7 +78,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-netgear-r7000.dtb \ - bcm4709-netgear-r8000.dtb + bcm4709-netgear-r8000.dtb \ + bcm94708.dtb \ + bcm94709.dtb \ + bcm953012k.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ @@ -200,12 +206,14 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ kirkwood-nsa310a.dtb \ + kirkwood-nsa325.dtb \ kirkwood-openblocks_a6.dtb \ kirkwood-openblocks_a7.dtb \ kirkwood-openrd-base.dtb \ kirkwood-openrd-client.dtb \ kirkwood-openrd-ultimate.dtb \ kirkwood-pogo_e02.dtb \ + kirkwood-pogoplug-series-4.dtb \ kirkwood-rd88f6192.dtb \ kirkwood-rd88f6281-z0.dtb \ kirkwood-rd88f6281-a.dtb \ @@ -268,7 +276,8 @@ dtb-$(CONFIG_SOC_IMX51) += \ imx51-apf51dev.dtb \ imx51-babbage.dtb \ imx51-digi-connectcore-jsk.dtb \ - imx51-eukrea-mbimxsd51-baseboard.dtb + imx51-eukrea-mbimxsd51-baseboard.dtb \ + imx51-ts4800.dtb dtb-$(CONFIG_SOC_IMX53) += \ imx53-ard.dtb \ imx53-m53evk.dtb \ @@ -325,6 +334,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ imx6q-nitrogen6_max.dtb \ + imx6q-novena.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ @@ -350,6 +360,8 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ + imx7d-cl-som-imx7.dtb \ + imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-qds.dtb \ @@ -359,6 +371,7 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-colibri-eval-v3.dtb \ vf610m4-colibri.dtb \ vf610-cosmic.dtb \ + vf610m4-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ @@ -452,20 +465,24 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ dtb-$(CONFIG_SOC_TI81XX) += \ dm8148-evm.dtb \ dm8148-t410.dtb \ - dm8168-evm.dtb + dm8168-evm.dtb \ + dra62x-j5eco-evm.dtb dtb-$(CONFIG_SOC_AM33XX) += \ am335x-baltos-ir5221.dtb \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ am335x-bonegreen.dtb \ - am335x-sl50.dtb \ + am335x-chiliboard.dtb \ + am335x-cm-t335.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ + am335x-lxm.dtb \ am335x-nano.dtb \ am335x-pepper.dtb \ - am335x-lxm.dtb \ - am335x-chiliboard.dtb \ + am335x-shc.dtb \ + am335x-sbc-t335.dtb \ + am335x-sl50.dtb \ am335x-wega-rdk.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-duovero-parlor.dtb \ @@ -478,17 +495,21 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-var-stk-om44.dtb dtb-$(CONFIG_SOC_AM43XX) += \ am43x-epos-evm.dtb \ - am437x-sk-evm.dtb \ + am437x-cm-t43.dtb \ + am437x-gp-evm.dtb \ am437x-idk-evm.dtb \ - am437x-gp-evm.dtb + am437x-sbc-t43.dtb \ + am437x-sk-evm.dtb dtb-$(CONFIG_SOC_OMAP5) += \ omap5-cm-t54.dtb \ omap5-igep0050.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb dtb-$(CONFIG_SOC_DRA7XX) += \ - dra7-evm.dtb \ am57xx-beagle-x15.dtb \ + am57xx-cl-som-am57x.dtb \ + am57xx-sbc-am57x.dtb \ + dra7-evm.dtb \ dra72-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-lacie-d2-network.dtb \ @@ -502,6 +523,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ + qcom-apq8064-sony-xperia-yuga.dtb \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -510,12 +532,16 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8960-cdp.dtb \ qcom-msm8974-sony-xperia-honami.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ - arm-realview-pb1176.dtb + arm-realview-pb1176.dtb \ + arm-realview-pb11mp.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ + rk3036-evb.dtb \ + rk3036-kylin.dtb \ rk3066a-bqcurie2.dtb \ rk3066a-marsboard.dtb \ rk3066a-rayeager.dtb \ rk3188-radxarock.dtb \ + rk3228-evb.dtb \ rk3288-evb-act8846.dtb \ rk3288-evb-rk808.dtb \ rk3288-firefly-beta.dtb \ @@ -523,8 +549,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-popmetal.dtb \ rk3288-r89.dtb \ rk3288-rock2-square.dtb \ + rk3288-veyron-brain.dtb \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ + rk3288-veyron-mickey.dtb \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ rk3288-veyron-speedy.dtb @@ -547,7 +575,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ r8a7778-bockw.dtb \ r8a7779-marzen.dtb \ r8a7790-lager.dtb \ - r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ r8a7791-porter.dtb \ r8a7793-gose.dtb \ @@ -557,6 +584,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ + socfpga_cyclone5_mcvevk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_de0_sockit.dtb \ socfpga_cyclone5_sockit.dtb \ @@ -612,6 +640,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a10s-wobo-i5.dtb \ + sun5i-a13-empire-electronix-d709.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-inet-98v-rev2.dtb \ sun5i-a13-olinuxino.dtb \ @@ -638,6 +667,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ + sun7i-a20-icnova-swac.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ sun7i-a20-olimex-som-evb.dtb \ @@ -660,10 +690,13 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-ga10h-v1.1.dtb \ sun8i-a33-ippo-q8h-v1.2.dtb \ sun8i-a33-q8-tablet.dtb \ - sun8i-a33-sinlinx-sina33.dtb + sun8i-a33-sinlinx-sina33.dtb \ + sun8i-h3-orangepi-plus.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb +dtb-$(CONFIG_ARCH_TANGO) += \ + tango4-vantage-1172.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-harmony.dtb \ tegra20-iris-512.dtb \ @@ -748,6 +781,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-385-db-ap.dtb \ armada-385-linksys-caiman.dtb \ armada-385-linksys-cobra.dtb \ + armada-388-clearfog.dtb \ armada-388-db.dtb \ armada-388-gp.dtb \ armada-388-rd.dtb @@ -771,6 +805,7 @@ dtb-$(CONFIG_MACH_DOVE) += \ dove-dove-db.dtb \ dove-sbc-a510.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += \ + mt2701-evb.dtb \ mt6580-evbp1.dtb \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 7d3660169..ded1eb64e 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -56,175 +56,171 @@ &am33xx_pinmux { mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - 0x020 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ - 0x024 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ - 0x028 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */ - 0x02c (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */ - 0x080 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */ - 0x084 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */ - 0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */ + AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ + AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ + AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */ + AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */ + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */ + AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */ >; }; wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - 0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ + AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ >; }; tps65910_pins: pinmux_tps65910_pins { pinctrl-single,pins = < - 0x078 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */ + AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */ >; }; tca6416_pins: pinmux_tca6416_pins { pinctrl-single,pins = < - 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ + AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x158 0x2a /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */ - 0x15c 0x2a /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */ + AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */ + AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */ >; }; dcan1_pins: pinmux_dcan1_pins { pinctrl-single,pins = < - 0x168 0x0a /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */ - 0x16c 0x2a /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */ + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */ + AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x180 0x28 /* uart1_rxd, INPUT | MODE0 */ - 0x184 0x28 /* uart1_txd, INPUT | MODE0 */ - /*0x178 0x28*/ /* uart1_ctsn, INPUT | MODE0 */ - /*0x17c 0x08*/ /* uart1_rtsn, OUTPUT | MODE0 */ - 0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */ - 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */ - 0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ - 0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ - 0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ - 0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ + AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */ + AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ + AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ + AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - 0x150 0x29 /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */ - 0x154 0x09 /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */ - /*0x188 0x2a*/ /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */ - /*0x18c 0x2a*/ /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */ - 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */ - 0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */ - 0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ - 0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ - 0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ - 0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ - - 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ + AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */ + AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */ + AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ + AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ + AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ + + AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ /* Slave 2 */ - 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* Slave 2 reset value*/ - 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; nandflash_pins_s0: nandflash_pins_s0 { pinctrl-single,pins = < - 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 5d370d54b..0cc150b87 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -67,112 +67,112 @@ user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ - 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ >; }; emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < - 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index eadbba323..55c0e954b 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -36,32 +36,32 @@ &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { pinctrl-single,pins = < - 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ - 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ - 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ - 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ - 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ >; }; nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { pinctrl-single,pins = < - 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts index 0f65bdaaa..dce3c8657 100644 --- a/arch/arm/boot/dts/am335x-bonegreen.dts +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -36,8 +36,8 @@ &am33xx_pinmux { uart2_pins: uart2_pins { pinctrl-single,pins = < - 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ + AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index 310da20a8..15d47ab28 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -37,26 +37,26 @@ &am33xx_pinmux { usb1_drvvbus: usb1_drvvbus { pinctrl-single,pins = < - 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */ + AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */ >; }; sd_pins: pinmux_sd_card { pinctrl-single,pins = < - 0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - 0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - 0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - 0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; led_gpio_pins: led_gpio_pins { pinctrl-single,pins = < - 0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */ - 0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */ + AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */ + AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index 7e9a34dff..857d98941 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -29,81 +29,81 @@ i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - 0x13c (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - 0x140 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* mdio_data.mdio_data */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_clk.mdio_clk */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; nandflash_pins: nandflash_pins { pinctrl-single,pins = < - 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts new file mode 100644 index 000000000..42e9b6655 --- /dev/null +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -0,0 +1,396 @@ +/* + * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335 + * + * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + model = "CompuLab CM-T335"; + compatible = "compulab,cm-t335", "ti,am33xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; /* 128 MB */ + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_led_pins>; + led@0 { + label = "cm_t335:green"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */ + linux,default-trigger = "heartbeat"; + }; + }; + + /* regulator for mmc */ + vmmc_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmc_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_pins>; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* uart0_ctsn.i2c1_sda */ + AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2) + /* uart0_rtsn.i2c1_scl */ + AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + + gpio_led_pins: pinmux_gpio_led_pins { + pinctrl-single,pins = < + /* gpmc_csn3.gpio2_0 */ + AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7) + >; + }; + + nandflash_pins: pinmux_nandflash_pins { + pinctrl-single,pins = < + /* gpmc_ad0.gpmc_ad0 */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) + /* gpmc_ad1.gpmc_ad1 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) + /* gpmc_ad2.gpmc_ad2 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) + /* gpmc_ad3.gpmc_ad3 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) + /* gpmc_ad4.gpmc_ad4 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) + /* gpmc_ad5.gpmc_ad5 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) + /* gpmc_ad6.gpmc_ad6 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) + /* gpmc_ad7.gpmc_ad7 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) + /* gpmc_wait0.gpmc_wait0 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) + /* gpmc_wpn.gpio0_30 */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) + /* gpmc_csn0.gpmc_csn0 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) + /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) + /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) + /* gpmc_wen.gpmc_wen */ + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) + /* gpmc_ben0_cle.gpmc_ben0_cle */ + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* uart1_ctsn.uart1_ctsn */ + AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) + /* uart1_rtsn.uart1_rtsn */ + AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + >; + }; + + ecap0_pins: pinmux_ecap0_pins { + pinctrl-single,pins = < + /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + AM33XX_IOPAD(0x964, 0x0) + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + /* mii1_tx_en.rgmii1_tctl */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + /* mii1_rxdv.rgmii1_rctl */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) + /* mii1_txd3.rgmii1_td3 */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + /* mii1_txd2.rgmii1_td2 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + /* mii1_txd1.rgmii1_td1 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + /* mii1_txd0.rgmii1_td0 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + /* mii1_txclk.rgmii1_tclk */ + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + /* mii1_rxclk.rgmii1_rclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) + /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) + /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) + /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) + /* mii1_rxd0.rgmii1_rd0 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) + /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) + /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) + /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) + /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) + /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) + /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + /* wl1271 bluetooth */ + bluetooth_pins: pinmux_bluetooth_pins { + pinctrl-single,pins = < + /* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +/* WLS1271 bluetooth */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + +status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + /* CM-T335 board EEPROM */ + eeprom: 24c02@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + /* Real Time Clock */ + ext_rtc: em3027@56 { + compatible = "emmicro,em3027"; + reg = <0x56>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&cppi41dma { + status = "okay"; +}; + +&epwmss0 { + status = "okay"; + + ecap0: ecap@48300100 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; + }; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "spl"; + reg = <0x00000000 0x00200000>; + }; + partition@1 { + label = "uboot"; + reg = <0x00200000 0x00100000>; + }; + partition@2 { + label = "uboot environment"; + reg = <0x00300000 0x00100000>; + }; + partition@3 { + label = "dtb"; + reg = <0x00400000 0x00100000>; + }; + partition@4 { + label = "splash"; + reg = <0x00500000 0x00400000>; + }; + partition@5 { + label = "linux"; + reg = <0x00900000 0x00600000>; + }; + partition@6 { + label = "rootfs"; + reg = <0x00F00000 0>; + }; + }; +}; + +&elm { + status = "okay"; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + slaves = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_fixed>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index d9d00ab86..0d6a68ce4 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -83,14 +83,14 @@ label = "volume-up"; linux,code = <115>; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; }; switch@10 { label = "volume-down"; linux,code = <114>; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -168,215 +168,215 @@ matrix_keypad_s0: matrix_keypad_s0 { pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ >; }; volume_keys_s0: volume_keys_s0 { pinctrl-single,pins = < - 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ - 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ + AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ - 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ + AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ - 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ >; }; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; nandflash_pins_s0: nandflash_pins_s0 { pinctrl-single,pins = < - 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; ecap0_pins: backlight_pins { pinctrl-single,pins = < - 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + AM33XX_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < - 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ - 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ - 0x4C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */ - 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */ - 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */ - 0x8C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ + AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ + AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */ + AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */ + AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */ + AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */ >; }; wlan_pins: pinmux_wlan_pins { pinctrl-single,pins = < - 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */ - 0x19C (PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ - 0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */ + AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */ + AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ + AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */ >; }; lcd_pins_s0: lcd_pins_s0 { pinctrl-single,pins = < - 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ - 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ - 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ - 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ - 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ - 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ - 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ - 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ - 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ >; }; mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ - 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; }; mcasp1_pins_sleep: mcasp1_pins_sleep { pinctrl-single,pins = < - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ - 0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ >; }; }; @@ -743,8 +743,8 @@ &mmc3 { /* these are on the crossbar and are outlined in the xbar-event-map element */ - dmas = <&edma 12 - &edma 13>; + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; dma-names = "tx", "rx"; status = "okay"; vmmc-supply = <&wlan_en_reg>; @@ -766,11 +766,6 @@ }; }; -&edma { - ti,edma-xbar-event-map = /bits/ 16 <1 12 - 2 13>; -}; - &sham { status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 89442e98a..282fe1b37 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -123,7 +123,7 @@ label = "button2"; linux,code = <0x102>; gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; - gpio-key,wakeup; + wakeup-source; }; switch@4 { @@ -204,234 +204,234 @@ lcd_pins_default: lcd_pins_default { pinctrl-single,pins = < - 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ - 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ - 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ - 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ - 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ - 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ - 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ - 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ - 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ >; }; lcd_pins_sleep: lcd_pins_sleep { pinctrl-single,pins = < - 0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */ - 0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */ - 0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */ - 0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */ - 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */ - 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */ - 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */ - 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */ - 0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */ - 0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */ - 0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */ - 0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */ - 0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */ - 0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */ - 0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */ - 0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */ - 0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */ - 0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */ - 0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */ - 0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */ - 0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */ - 0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */ - 0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */ - 0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */ - 0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */ - 0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */ - 0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */ - 0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */ + AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */ + AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */ + AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */ + AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */ + AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */ + AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */ + AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */ >; }; user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ - 0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ - 0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ - 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ + AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ + AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ + AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ + AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ >; }; gpio_keys_s0: gpio_keys_s0 { pinctrl-single,pins = < - 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ - 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ - 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ - 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ + AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ + AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; ecap2_pins: backlight_pins { pinctrl-single,pins = < - 0x19c 0x4 /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */ + AM33XX_IOPAD(0x99c, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ /* Slave 2 */ - 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) /* Slave 2 reset value*/ - 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ - 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; }; mcasp1_pins_sleep: mcasp1_pins_sleep { pinctrl-single,pins = < - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ - 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ >; }; wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index 5c5667a36..d97b0efa4 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -46,109 +46,109 @@ &am33xx_pinmux { mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ - 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ - 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ - 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ - 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ - 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */ - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */ /* Slave 2 */ - 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */ - 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */ - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */ - 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */ - 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */ - 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ - 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */ + AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */ + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */ + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */ + AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ + AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */ - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */ - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */ - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */ - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */ + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */ + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */ /* Slave 2 reset value*/ - 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */ - 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */ - 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */ - 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */ - 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */ - 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ - 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */ + AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */ + AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */ + AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */ + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */ + AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ + AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */ >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < - 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 5ed4ca6ea..f313999c5 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -41,121 +41,121 @@ misc_pins: misc_pins { pinctrl-single,pins = < - 0x15c (PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */ + AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */ >; }; gpmc_pins: gpmc_pins { pinctrl-single,pins = < - 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x20 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */ - 0x24 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */ - 0x28 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */ - 0x2c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */ - 0x30 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */ - 0x34 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */ - 0x38 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */ - 0x3c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */ - - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x80 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */ - 0x84 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */ - 0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */ - - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */ - - 0xa4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */ - 0xa8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */ - 0xac (PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */ - 0xb0 (PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */ - 0xb4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */ - 0xb8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */ - 0xbc (PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */ - - 0xe0 (PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */ - 0xe4 (PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */ - 0xe8 (PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */ + AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */ + AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */ + AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */ + AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */ + AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */ + AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */ + + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */ + AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */ + AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */ + + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */ + + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */ + + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */ >; }; i2c0_pins: i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; uart0_pins: uart0_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; uart1_pins: uart1_pins { pinctrl-single,pins = < - 0x178 (PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */ - 0x17c (PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */ - 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - 0x184 (PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */ + AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */ + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */ >; }; uart2_pins: uart2_pins { pinctrl-single,pins = < - 0xc0 (PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */ - 0xc4 (PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */ - 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */ + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ + AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ >; }; uart3_pins: uart3_pins { pinctrl-single,pins = < - 0xc8 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */ - 0xcc (PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */ - 0x160 (PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */ - 0x164 (PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ + AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */ + AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ >; }; uart4_pins: uart4_pins { pinctrl-single,pins = < - 0xd0 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */ - 0xd4 (PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */ - 0x168 (PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */ - 0x16c (PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */ + AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */ + AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */ + AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */ >; }; uart5_pins: uart5_pins { pinctrl-single,pins = < - 0xd8 (PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */ - 0x144 (PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */ + AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */ + AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */ >; }; mmc1_pins: mmc1_pins { pinctrl-single,pins = < - 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ - 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ + AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 7106114c7..8867aaaec 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -93,14 +93,14 @@ &am33xx_pinmux { i2c0_pins: pinmux_i2c0 { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c1_pins: pinmux_i2c1 { pinctrl-single,pins = < - 0x10C (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */ + AM33XX_IOPAD(0x90C, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */ >; }; }; @@ -130,7 +130,7 @@ &am33xx_pinmux { accel_pins: pinmux_accel { pinctrl-single,pins = < - 0x98 (PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */ + AM33XX_IOPAD(0x898, PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */ >; }; }; @@ -177,12 +177,12 @@ &am33xx_pinmux { audio_pins: pinmux_audio { pinctrl-single,pins = < - 0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - 0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - 0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - 0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */ - 0x40 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */ + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ + AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */ + AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */ >; }; }; @@ -228,36 +228,36 @@ &am33xx_pinmux { lcd_pins: pinmux_lcd { pinctrl-single,pins = < - 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */ - 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */ - 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */ - 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */ - 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */ - 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */ - 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */ - 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */ - 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */ + AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */ + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */ + AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */ + AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */ + AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */ + AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */ + AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ /* Display Enable */ - 0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */ >; }; }; @@ -291,29 +291,29 @@ &am33xx_pinmux { ethernet_pins: pinmux_ethernet { pinctrl-single,pins = < - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - 0x134 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */ - 0x138 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */ - 0x13c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ - 0x140 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ /* ethernet interrupt */ - 0x144 (PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */ /* ethernet PHY nReset */ - 0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */ + AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */ >; }; mdio_pins: pinmux_mdio { pinctrl-single,pins = < - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; }; @@ -339,13 +339,6 @@ ti,non-removable; }; -&edma { - /* Map eDMA MMC2 Events from Crossbar */ - ti,edma-xbar-event-map = /bits/ 16 <1 12 - 2 13>; -}; - - &mmc3 { /* Wifi & Bluetooth on MMC #3 */ status = "okay"; @@ -354,8 +347,8 @@ vmmmc-supply = <&v3v3c_reg>; bus-width = <4>; ti,non-removable; - dmas = <&edma 12 - &edma 13>; + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; dma-names = "tx", "rx"; }; @@ -363,45 +356,45 @@ &am33xx_pinmux { sd_pins: pinmux_sd_card { pinctrl-single,pins = < - 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; emmc_pins: pinmux_emmc { pinctrl-single,pins = < - 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ /* EMMC nReset */ - 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ >; }; wireless_pins: pinmux_wireless { pinctrl-single,pins = < - 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ - 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ - 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ - 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */ - 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ - 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ + AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ + AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ + AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */ + AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */ /* WLAN nReset */ - 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ /* WLAN nPower down */ - 0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + AM33XX_IOPAD(0x870, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ /* 32kHz Clock */ - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; }; @@ -497,10 +490,10 @@ &am33xx_pinmux { spi0_pins: pinmux_spi0 { pinctrl-single,pins = < - 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ - 0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ - 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ - 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ >; }; }; @@ -538,16 +531,16 @@ &am33xx_pinmux { uart0_pins: pinmux_uart0 { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; uart1_pins: pinmux_uart1 { pinctrl-single,pins = < - 0x178 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ - 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ >; }; }; @@ -590,9 +583,9 @@ usb_pins: pinmux_usb { pinctrl-single,pins = < /* USB0 Over-Current (active low) */ - 0x64 (PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */ + AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */ /* USB1 Over-Current (active low) */ - 0x68 (PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */ >; }; }; @@ -627,37 +620,37 @@ label = "home"; linux,code = <KEY_HOME>; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; }; button@1 { label = "menu"; linux,code = <KEY_MENU>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; }; buttons@2 { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; }; }; &am33xx_pinmux { user_leds_pins: pinmux_user_leds { pinctrl-single,pins = < - 0x50 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */ - 0x54 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ >; }; user_buttons_pins: pinmux_user_buttons { pinctrl-single,pins = < - 0x58 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x5C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */ - 0x164 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */ + AM33XX_IOPAD(0x858, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85C, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */ + AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 2f43e458e..c20ae6c6f 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -56,22 +56,22 @@ &am33xx_pinmux { ethernet0_pins: pinmux_ethernet0 { pinctrl-single,pins = < - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - 0x114 (PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */ - 0x124 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - 0x128 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */ + AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ >; }; mdio_pins: pinmux_mdio { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; }; @@ -103,8 +103,8 @@ &am33xx_pinmux { i2c0_pins: pinmux_i2c0 { pinctrl-single,pins = < - 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; }; @@ -137,20 +137,20 @@ &am33xx_pinmux { nandflash_pins: pinmux_nandflash { pinctrl-single,pins = < - 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; }; @@ -324,10 +324,10 @@ &am33xx_pinmux { spi0_pins: pinmux_spi0 { pinctrl-single,pins = < - 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */ - 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */ - 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ - 0x15c (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts new file mode 100644 index 000000000..917d7ccc9 --- /dev/null +++ b/arch/arm/boot/dts/am335x-sbc-t335.dts @@ -0,0 +1,219 @@ +/* + * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335 + * + * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am335x-cm-t335.dts" + +/ { + model = "CompuLab CM-T335 on SB-T335"; + compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx"; + + /* DRM display driver */ + panel { + compatible = "ti,tilcdc,panel"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_pins_default>; + pinctrl-1 = <&lcd_pins_sleep>; + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + display-timings { + /* Timing selection performed by U-Boot */ + timing0: lcd {/* 800x480p62 */ + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <39>; + hback-porch = <39>; + hsync-len = <47>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + timing1: dvi { /* 1024x768p60 */ + clock-frequency = <65000000>; + hactive = <1024>; + hfront-porch = <24>; + hback-porch = <160>; + hsync-len = <136>; + vactive = <768>; + vfront-porch = <3>; + vback-porch = <29>; + vsync-len = <6>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; +}; + +&am33xx_pinmux { + /* Display */ + lcd_pins_default: lcd_pins_default { + pinctrl-single,pins = < + /* gpmc_ad8.lcd_data23 */ + AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad9.lcd_data22 */ + AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad10.lcd_data21 */ + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad11.lcd_data20 */ + AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad12.lcd_data19 */ + AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad13.lcd_data18 */ + AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad14.lcd_data17 */ + AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad15.lcd_data16 */ + AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) + /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) + /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) + /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) + /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) + /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) + /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) + /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) + /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) + /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) + /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) + /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) + /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) + /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) + /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) + /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) + /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) + /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) + /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) + /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) + /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) + >; + }; + + lcd_pins_sleep: lcd_pins_sleep { + pinctrl-single,pins = < + /* gpmc_ad8.lcd_data23 */ + AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* gpmc_ad9.lcd_data22 */ + AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* gpmc_ad10.lcd_data21 */ + AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* gpmc_ad11.lcd_data20 */ + AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* gpmc_ad12.lcd_data19 */ + AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* gpmc_ad13.lcd_data18 */ + AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* gpmc_ad14.lcd_data17 */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* gpmc_ad15.lcd_data16 */ + AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7) + /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7) + /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7) + /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7) + /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7) + /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7) + /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7) + /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7) + /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7) + /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7) + /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7) + /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7) + /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7) + /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7) + /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7) + /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7) + /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; +}; + +&i2c0 { + /* GPIO extender */ + gpio_ext: pca9555@26 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x26>; + dvi_ena { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "dvi-enable"; + }; + lcd_ena { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "lcd-enable"; + }; + }; +}; + +/* Display */ +&lcdc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts new file mode 100644 index 000000000..865de8500 --- /dev/null +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -0,0 +1,577 @@ +/* + * support for the bosch am335x based shc c3 board + * + * Copyright, C) 2015 Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Bosch SHC"; + compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx"; + + aliases { + mmcblk0 = &mmc1; + mmcblk1 = &mmc2; + }; + + cpus { + cpu@0 { + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 594000 1225000 + 294000 1125000 + >; + voltage-tolerance = <2>; /* 2 percentage */ + cpu0-supply = <&dcdc2_reg>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + back_button { + label = "Back Button"; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_BACK>; + debounce-interval = <1000>; + wakeup-source; + }; + + front_button { + label = "Front Button"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_FRONT>; + debounce-interval = <1000>; + wakeup-source; + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@1 { + label = "shc:power:red"; + gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@2 { + label = "shc:power:bl"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + default-state = "on"; + }; + + led@3 { + label = "shc:lan:red"; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@4 { + label = "shc:lan:bl"; + gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@5 { + label = "shc:cloud:red"; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@6 { + label = "shc:cloud:bl"; + gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&aes { + status = "okay"; +}; + +&cppi41dma { + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; + + ethernetphy0: ethernet-phy@0 { + reg = <0>; + smsc,disable-energy-detect; + }; +}; + +&epwmss1 { + status = "okay"; + + ehrpwm1: ehrpwm@48302200 { + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm1_pins>; + status = "okay"; + }; +}; + +&gpio1 { + hmtc_rst { + gpio-hog; + gpios = <24 GPIO_ACTIVE_LOW>; + output-high; + line-name = "homematic_reset"; + }; + + hmtc_prog { + gpio-hog; + gpios = <27 GPIO_ACTIVE_LOW>; + output-high; + line-name = "homematic_program"; + }; +}; + +&gpio3 { + zgb_rst { + gpio-hog; + gpios = <18 GPIO_ACTIVE_LOW>; + output-low; + line-name = "zigbee_reset"; + }; + + zgb_boot { + gpio-hog; + gpios = <19 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "zigbee_boot"; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + at24@50 { + compatible = "at24,24c32"; + pagesize = <32>; + reg = <0x50>; + }; + + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; + slaves = <1>; + cpsw_emac0: slave@4a100200 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; + phy-handle = <ðernetphy0>; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + bus-width = <0x4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + max-frequency = <26000000>; + vmmc-supply = <&vmmcsd_fixed>; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + max-frequency = <26000000>; + sd-uhs-sdr25; + vmmc-supply = <&vmmcsd_fixed>; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + bus-width = <4>; + cap-power-off-card; + max-frequency = <26000000>; + sd-uhs-sdr25; + vmmc-supply = <&vmmcsd_fixed>; + status = "okay"; +}; + +&rtc { + ti,no-init; +}; + +&sham { + status = "okay"; +}; + +&tps { + compatible = "ti,tps65217"; + ti,pmic-shutdown-controller; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-name = "vdds_dpr"; + regulator-compatible = "dcdc1"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1450000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + /* + * VDD_MPU voltage limits 0.95V - 1.26V with + * +/-4% tolerance + */ + regulator-compatible = "dcdc2"; + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <70000>; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + /* + * VDD_CORE voltage limits 0.95V - 1.1V with + * +/-4% tolerance + */ + regulator-name = "vdd_core"; + regulator-compatible = "dcdc3"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1125000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-name = "vio,vrtc,vdds"; + regulator-compatible = "ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-name = "vdd_3v3aux"; + regulator-compatible = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-name = "vdd_1v8"; + regulator-compatible = "ldo3"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-name = "vdd_3v3a"; + regulator-compatible = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + /* xdma_event_intr1.clkout2 */ + AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6) + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) + /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + ehrpwm1_pins: pinmux_ehrpwm1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2) + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5) + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3) + AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3) + AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3) + AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3) + AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3) + AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3) + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0) + >; + }; + + uart1_pins: pinmux_uart1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) + AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) + AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6) + >; + }; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7) + AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7) + AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7) + AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; +}; diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 2cecb3951..282f6d4b2 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -28,8 +28,8 @@ &am33xx_pinmux { dcan1_pins: pinmux_dcan1 { pinctrl-single,pins = < - 0x168 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ - 0x16c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ >; }; }; @@ -44,20 +44,20 @@ &am33xx_pinmux { ethernet1_pins: pinmux_ethernet1 { pinctrl-single,pins = < - 0x40 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */ - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */ - 0x48 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */ - 0x4c (PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */ - 0x50 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */ - 0x54 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */ - 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */ - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */ - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ - 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ - 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */ + AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */ + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */ + AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */ + AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */ + AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */ + AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ + AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */ >; }; }; @@ -79,13 +79,13 @@ &am33xx_pinmux { mmc1_pins: pinmux_mmc1 { pinctrl-single,pins = < - 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - 0x160 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ >; }; }; @@ -103,17 +103,17 @@ &am33xx_pinmux { uart0_pins: pinmux_uart0 { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ - 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ >; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index cfa870139..be095d432 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -161,6 +161,14 @@ mboxes = <&mailbox &mbox_wkupm3>; }; + edma_xbar: dma-router@f90 { + compatible = "ti,am335x-edma-crossbar"; + reg = <0xf90 0x40>; + #dma-cells = <3>; + dma-requests = <32>; + dma-masters = <&edma>; + }; + scm_clockdomains: clockdomains { }; }; @@ -174,12 +182,44 @@ }; edma: edma@49000000 { - compatible = "ti,edma3"; - ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; - reg = <0x49000000 0x10000>, - <0x44e10f90 0x40>; + compatible = "ti,edma3-tpcc"; + ti,hwmods = "tpcc"; + reg = <0x49000000 0x10000>; + reg-names = "edma3_cc"; interrupts = <12 13 14>; - #dma-cells = <1>; + interrupt-names = "edma3_ccint", "emda3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 0>; + + ti,edma-memcpy-channels = <20 21>; + }; + + edma_tptc0: tptc@49800000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc0"; + reg = <0x49800000 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; + + edma_tptc1: tptc@49900000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc1"; + reg = <0x49900000 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; + + edma_tptc2: tptc@49a00000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc2"; + reg = <0x49a00000 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; }; gpio0: gpio@44e07000 { @@ -233,7 +273,7 @@ reg = <0x44e09000 0x2000>; interrupts = <72>; status = "disabled"; - dmas = <&edma 26>, <&edma 27>; + dmas = <&edma 26 0>, <&edma 27 0>; dma-names = "tx", "rx"; }; @@ -244,7 +284,7 @@ reg = <0x48022000 0x2000>; interrupts = <73>; status = "disabled"; - dmas = <&edma 28>, <&edma 29>; + dmas = <&edma 28 0>, <&edma 29 0>; dma-names = "tx", "rx"; }; @@ -255,7 +295,7 @@ reg = <0x48024000 0x2000>; interrupts = <74>; status = "disabled"; - dmas = <&edma 30>, <&edma 31>; + dmas = <&edma 30 0>, <&edma 31 0>; dma-names = "tx", "rx"; }; @@ -322,8 +362,8 @@ ti,dual-volt; ti,needs-special-reset; ti,needs-special-hs-handling; - dmas = <&edma 24 - &edma 25>; + dmas = <&edma_xbar 24 0 0 + &edma_xbar 25 0 0>; dma-names = "tx", "rx"; interrupts = <64>; interrupt-parent = <&intc>; @@ -335,8 +375,8 @@ compatible = "ti,omap4-hsmmc"; ti,hwmods = "mmc2"; ti,needs-special-reset; - dmas = <&edma 2 - &edma 3>; + dmas = <&edma 2 0 + &edma 3 0>; dma-names = "tx", "rx"; interrupts = <28>; interrupt-parent = <&intc>; @@ -399,6 +439,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; @@ -474,10 +515,10 @@ interrupts = <65>; ti,spi-num-cs = <2>; ti,hwmods = "spi0"; - dmas = <&edma 16 - &edma 17 - &edma 18 - &edma 19>; + dmas = <&edma 16 0 + &edma 17 0 + &edma 18 0 + &edma 19 0>; dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -490,10 +531,10 @@ interrupts = <125>; ti,spi-num-cs = <2>; ti,hwmods = "spi1"; - dmas = <&edma 42 - &edma 43 - &edma 44 - &edma 45>; + dmas = <&edma 42 0 + &edma 43 0 + &edma 44 0 + &edma 45 0>; dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -819,6 +860,8 @@ ti,no-idle-on-init; reg = <0x50000000 0x2000>; interrupts = <100>; + dmas = <&edma 52>; + dma-names = "rxtx"; gpmc,num-cs = <7>; gpmc,num-waitpins = <2>; #address-cells = <2>; @@ -831,7 +874,7 @@ ti,hwmods = "sham"; reg = <0x53100000 0x200>; interrupts = <109>; - dmas = <&edma 36>; + dmas = <&edma 36 0>; dma-names = "rx"; }; @@ -840,8 +883,8 @@ ti,hwmods = "aes"; reg = <0x53500000 0xa0>; interrupts = <103>; - dmas = <&edma 6>, - <&edma 5>; + dmas = <&edma 6 0>, + <&edma 5 0>; dma-names = "tx", "rx"; }; @@ -854,8 +897,8 @@ interrupts = <80>, <81>; interrupt-names = "tx", "rx"; status = "disabled"; - dmas = <&edma 8>, - <&edma 9>; + dmas = <&edma 8 2>, + <&edma 9 2>; dma-names = "tx", "rx"; }; @@ -868,8 +911,8 @@ interrupts = <82>, <83>; interrupt-names = "tx", "rx"; status = "disabled"; - dmas = <&edma 10>, - <&edma 11>; + dmas = <&edma 10 2>, + <&edma 11 2>; dma-names = "tx", "rx"; }; diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts index 2d40b3f24..cb7de1d4e 100644 --- a/arch/arm/boot/dts/am3517-craneboard.dts +++ b/arch/arm/boot/dts/am3517-craneboard.dts @@ -77,7 +77,7 @@ &omap3_pmx_core { tps_pins: pinmux_tps_pins { pinctrl-single,pins = < - 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */ + OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */ >; }; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index f2d42e4c2..c09211317 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -30,6 +30,7 @@ serial5 = &uart5; ethernet0 = &cpsw_emac0; ethernet1 = &cpsw_emac1; + spi0 = &qspi; }; cpus { @@ -72,7 +73,7 @@ global_timer: timer@48240200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x48240200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; @@ -80,7 +81,7 @@ local_timer: timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x48240600 0x100>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; @@ -171,6 +172,14 @@ mboxes = <&mailbox &mbox_wkupm3>; }; + edma_xbar: dma-router@f90 { + compatible = "ti,am335x-edma-crossbar"; + reg = <0xf90 0x40>; + #dma-cells = <3>; + dma-requests = <64>; + dma-masters = <&edma>; + }; + scm_clockdomains: clockdomains { }; }; @@ -183,14 +192,46 @@ }; edma: edma@49000000 { - compatible = "ti,edma3"; - ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; - reg = <0x49000000 0x10000>, - <0x44e10f90 0x10>; + compatible = "ti,edma3-tpcc"; + ti,hwmods = "tpcc"; + reg = <0x49000000 0x10000>; + reg-names = "edma3_cc"; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_ccint", "emda3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 0>; + + ti,edma-memcpy-channels = <32 33>; + }; + + edma_tptc0: tptc@49800000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc0"; + reg = <0x49800000 0x100000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; + + edma_tptc1: tptc@49900000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc1"; + reg = <0x49900000 0x100000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; + + edma_tptc2: tptc@49a00000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc2"; + reg = <0x49a00000 0x100000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; }; uart0: serial@44e09000 { @@ -249,6 +290,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; @@ -495,8 +537,8 @@ ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; - dmas = <&edma 24 - &edma 25>; + dmas = <&edma 24 0>, + <&edma 25 0>; dma-names = "tx", "rx"; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -507,8 +549,8 @@ reg = <0x481d8000 0x1000>; ti,hwmods = "mmc2"; ti,needs-special-reset; - dmas = <&edma 2 - &edma 3>; + dmas = <&edma 2 0>, + <&edma 3 0>; dma-names = "tx", "rx"; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -776,7 +818,7 @@ compatible = "ti,omap5-sham"; ti,hwmods = "sham"; reg = <0x53100000 0x300>; - dmas = <&edma 36>; + dmas = <&edma 36 0>; dma-names = "rx"; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; }; @@ -786,8 +828,8 @@ ti,hwmods = "aes"; reg = <0x53501000 0xa0>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&edma 6 - &edma 5>; + dmas = <&edma 6 0>, + <&edma 5 0>; dma-names = "tx", "rx"; }; @@ -796,8 +838,8 @@ ti,hwmods = "des"; reg = <0x53701000 0xa0>; interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&edma 34 - &edma 33>; + dmas = <&edma 34 0>, + <&edma 33 0>; dma-names = "tx", "rx"; }; @@ -810,8 +852,8 @@ interrupts = <80>, <81>; interrupt-names = "tx", "rx"; status = "disabled"; - dmas = <&edma 8>, - <&edma 9>; + dmas = <&edma 8 2>, + <&edma 9 2>; dma-names = "tx", "rx"; }; @@ -824,8 +866,8 @@ interrupts = <82>, <83>; interrupt-names = "tx", "rx"; status = "disabled"; - dmas = <&edma 10>, - <&edma 11>; + dmas = <&edma 10 2>, + <&edma 11 2>; dma-names = "tx", "rx"; }; @@ -842,6 +884,8 @@ gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; + dmas = <&edma 52>; + dma-names = "rxtx"; clocks = <&l3s_gclk>; clock-names = "fck"; reg = <0x50000000 0x2000>; @@ -963,7 +1007,9 @@ qspi: qspi@47900000 { compatible = "ti,am4372-qspi"; - reg = <0x47900000 0x100>; + reg = <0x47900000 0x100>, + <0x30000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "qspi"; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts new file mode 100644 index 000000000..8677f4cce --- /dev/null +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -0,0 +1,422 @@ +/* + * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/am43xx.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "am4372.dtsi" + +/ { + model = "CompuLab CM-T43"; + compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"; + + leds { + compatible = "gpio-leds"; + + ledb { + label = "cm-t43:green"; + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vmmc_3v3: fixedregulator-v3_3 { + compatible = "regulator-fixed"; + regulator-name = "vmmc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + enable-active-high; + }; +}; + +&am43xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&cm_t43_led_pins>; + + cm_t43_led_pins: cm_t43_led_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0xa78, MUX_MODE7) + >; + }; + + i2c0_pins: i2c0_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + emmc_pins: emmc_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */ + AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */ + AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2 */ + AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3 */ + AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad12.mmc1_dat4 */ + AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad13.mmc1_dat5 */ + AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad14.mmc1_dat6 */ + AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad15.mmc1_dat7 */ + AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + >; + }; + + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */ + AM4372_IOPAD(0x958, PIN_OUTPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */ + AM4372_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + >; + }; + + nand_flash_x8: nand_flash_x8 { + pinctrl-single,pins = < + AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0) + AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0) + AM4372_IOPAD(0x808, PIN_INPUT | PULL_DISABLE | MUX_MODE0) + AM4372_IOPAD(0x80c, PIN_INPUT | PULL_DISABLE | MUX_MODE0) + AM4372_IOPAD(0x810, PIN_INPUT | PULL_DISABLE | MUX_MODE0) + AM4372_IOPAD(0x814, PIN_INPUT | PULL_DISABLE | MUX_MODE0) + AM4372_IOPAD(0x818, PIN_INPUT | PULL_DISABLE | MUX_MODE0) + AM4372_IOPAD(0x81c, PIN_INPUT | PULL_DISABLE | MUX_MODE0) + AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x898, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM4372_IOPAD(0x894, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM4372_IOPAD(0x890, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM4372_IOPAD(0x89c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ + AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ + AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ + AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ + AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ + AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ + AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ + AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ + AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + AM4372_IOPAD(0xa74, MUX_MODE3) + /* Slave 2 */ + AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.txen */ + AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rxctl */ + AM4372_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.txd3 */ + AM4372_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.txd2 */ + AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.txd1 */ + AM4372_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.txd0 */ + AM4372_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.tclk */ + AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rclk */ + AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rxd3 */ + AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rxd2 */ + AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rxd1 */ + AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rxd0 */ + AM4372_IOPAD(0xa38, MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_flash_x8>; + ranges = <0 0 0x08000000 0x1000000>; + nand@0,0 { + reg = <0 0 0>; + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + gpmc,wait-pin = <0>; + + #address-cells = <1>; + #size-cells = <1>; + /* MTD partition table */ + partition@0 { + label = "kernel"; + reg = <0x0 0x00980000>; + }; + partition@980000 { + label = "dtb"; + reg = <0x00980000 0x00080000>; + }; + partition@a00000 { + label = "rootfs"; + reg = <0x00a00000 0x0>; + }; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <100000>; + + tps65218: tps65218@24 { + compatible = "ti,tps65218"; + reg = <0x24>; + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + compatible = "ti,tps65218-dcdc1"; + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + compatible = "ti,tps65218-dcdc2"; + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + compatible = "ti,tps65218-dcdc3"; + regulator-name = "vdcdc3"; + regulator-suspend-enable; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc5: regulator-dcdc5 { + compatible = "ti,tps65218-dcdc5"; + regulator-name = "v1_0bat"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc6: regulator-dcdc6 { + compatible = "ti,tps65218-dcdc6"; + regulator-name = "v1_8bat"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,tps65218-ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + + eeprom_module: at24@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&gpio4 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&mmc2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + vmmc-supply = <&vmmc_3v3>; + bus-width = <8>; + ti,non-removable; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + dmas = <&edma 16 + &edma 17>; + dma-names = "tx0", "rx0"; + + flash: w25q64cvzpig@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + partition@0 { + label = "uboot"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "uboot environment"; + reg = <0xc0000 0x40000>; + }; + + partition@100000 { + label = "reserved"; + reg = <0x100000 0x100000>; + }; + }; +}; + +&mac { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_default>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_default>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii-txid"; + dual_emac_res_vlan = <2>; +}; + +&dwc3_1 { + status = "okay"; +}; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + status = "okay"; +}; + +&dwc3_2 { + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", "host", "otg"; +}; + +&elm { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordiante-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +&cpu { + cpu0-supply = <&dcdc2>; + operating-points = <1000000 1330000>, + <800000 1260000>, + <720000 1200000>, + <600000 1100000>, + <300000 950000>; +}; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index d2450ab0a..ecd09ab6d 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -154,138 +154,138 @@ i2c0_pins: i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c1_pins: i2c1_pins { pinctrl-single,pins = < - 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; ecap0_pins: backlight_pins { pinctrl-single,pins = < - 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ >; }; pixcir_ts_pins: pixcir_ts_pins { pinctrl-single,pins = < - 0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ + AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ - 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ + AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ + AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ + AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ + AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ + AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ + AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ + AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ + AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; nand_flash_x8: nand_flash_x8 { pinctrl-single,pins = < - 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM4372_IOPAD(0x808, PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM4372_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM4372_IOPAD(0x810, PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM4372_IOPAD(0x814, PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM4372_IOPAD(0x818, PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM4372_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ + AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; dss_pins: dss_pins { pinctrl-single,pins = < - 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ - 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ - 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ - 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ - 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ - 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ - 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ - 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ + AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ + AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ >; }; @@ -293,208 +293,208 @@ display_mux_pins: display_mux_pins { pinctrl-single,pins = < /* GPIO 5_8 to select LCD / HDMI */ - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; dcan0_default: dcan0_default_pins { pinctrl-single,pins = < - 0x178 (PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ - 0x17c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ + AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ + AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ >; }; dcan0_sleep: dcan0_sleep_pins { pinctrl-single,pins = < - 0x178 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */ - 0x17c (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */ + AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */ + AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */ >; }; dcan1_default: dcan1_default_pins { pinctrl-single,pins = < - 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ - 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ + AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ + AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ >; }; dcan1_sleep: dcan1_sleep_pins { pinctrl-single,pins = < - 0x180 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */ - 0x184 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */ + AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */ + AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */ >; }; vpfe0_pins_default: vpfe0_pins_default { pinctrl-single,pins = < - 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ - 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ - 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ - 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ - 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ - 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ - 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ - 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ - 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ - 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ - 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ - 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ - 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ + AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ + AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ + AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ + AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ + AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ + AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ + AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ + AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ + AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ + AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ + AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ + AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ + AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ >; }; vpfe0_pins_sleep: vpfe0_pins_sleep { pinctrl-single,pins = < - 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ - 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ - 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/ - 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/ - 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/ - 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/ - 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/ - 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/ - 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/ - 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/ - 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/ - 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/ - 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/ + AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ + AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ + AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/ + AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/ + AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/ + AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/ + AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/ + AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/ + AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/ + AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/ + AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/ + AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/ + AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/ >; }; vpfe1_pins_default: vpfe1_pins_default { pinctrl-single,pins = < - 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ - 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ - 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/ - 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/ - 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/ - 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/ - 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/ - 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/ - 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/ - 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/ - 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/ - 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/ - 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/ + AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ + AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ + AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/ + AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/ + AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/ + AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/ + AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/ + AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/ + AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/ + AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/ + AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/ + AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/ + AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/ >; }; vpfe1_pins_sleep: vpfe1_pins_sleep { pinctrl-single,pins = < - 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ - 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ - 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/ - 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/ - 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/ - 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/ - 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/ - 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/ - 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/ - 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/ - 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/ - 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/ - 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ + AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ + AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ + AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/ + AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/ + AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/ + AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/ + AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/ + AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/ + AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/ + AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/ + AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/ + AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/ + AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ >; }; mmc3_pins_default: pinmux_mmc3_pins_default { pinctrl-single,pins = < - 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ - 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ - 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ - 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ - 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ - 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */ + AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ + AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ + AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ + AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */ >; }; mmc3_pins_sleep: pinmux_mmc3_pins_sleep { pinctrl-single,pins = < - 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ - 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */ - 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */ - 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */ - 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */ + AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ + AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ + AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */ + AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */ + AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */ + AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */ >; }; wlan_pins_default: pinmux_wlan_pins_default { pinctrl-single,pins = < - 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ - 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ - 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ + AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ + AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ + AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ >; }; wlan_pins_sleep: pinmux_wlan_pins_sleep { pinctrl-single,pins = < - 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ - 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ - 0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ + AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ + AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ + AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ >; }; uart3_pins: uart3_pins { pinctrl-single,pins = < - 0x228 (PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ - 0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ - 0x230 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */ - 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ + AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ + AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ + AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */ + AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ >; }; mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < - 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; }; mcasp1_sleep_pins: mcasp1_sleep_pins { pinctrl-single,pins = < - 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; gpio0_pins: gpio0_pins { pinctrl-single,pins = < - 0x26c (PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */ + AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */ >; }; emmc_pins_default: emmc_pins_default { pinctrl-single,pins = < - 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ - 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ >; }; emmc_pins_sleep: emmc_pins_sleep { pinctrl-single,pins = < - 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */ - 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */ - 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */ - 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */ - 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ - 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ - 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ - 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ - 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */ - 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ + AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */ + AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */ + AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */ + AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */ + AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ + AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ + AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ + AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ + AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */ + AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ >; }; }; @@ -590,8 +590,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; @@ -599,7 +597,7 @@ * 0x264 represents the offset of padconf register of * gpio3_22 from am43xx_pinmux base. */ - interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>, + interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>, <&am43xx_pinmux 0x264>; interrupt-names = "tsc", "wakeup"; @@ -734,8 +732,8 @@ status = "okay"; /* these are on the crossbar and are outlined in the xbar-event-map element */ - dmas = <&edma 30 - &edma 31>; + dmas = <&edma_xbar 30 0 1>, + <&edma_xbar 31 0 2>; dma-names = "tx", "rx"; vmmc-supply = <&vmmcwl_fixed>; bus-width = <4>; @@ -756,11 +754,6 @@ }; }; -&edma { - ti,edma-xbar-event-map = /bits/ 16 <1 30 - 2 31>; -}; - &uart3 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 337fb91ee..76dcfc6d5 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -122,137 +122,137 @@ &am43xx_pinmux { gpio_keys_pins_default: gpio_keys_pins_default { pinctrl-single,pins = < - 0x1b8 (PIN_INPUT | MUX_MODE7) /* cam0_field.gpio4_2 */ + AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7) /* cam0_field.gpio4_2 */ >; }; i2c0_pins_default: i2c0_pins_default { pinctrl-single,pins = < - 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c0_pins_sleep: i2c0_pins_sleep { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; i2c2_pins_default: i2c2_pins_default { pinctrl-single,pins = < - 0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */ - 0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */ + AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */ + AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */ >; }; i2c2_pins_sleep: i2c2_pins_sleep { pinctrl-single,pins = < - 0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; mmc1_pins_default: pinmux_mmc1_pins_default { pinctrl-single,pins = < - 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - 0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - 0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - 0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - 0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM4372_IOPAD(0x9f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM4372_IOPAD(0x9f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM4372_IOPAD(0x9f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM4372_IOPAD(0x9fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; mmc1_pins_sleep: pinmux_mmc1_pins_sleep { pinctrl-single,pins = < - 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x960, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; ecap0_pins_default: backlight_pins_default { pinctrl-single,pins = < - 0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */ + AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < - 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ + AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ + AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ + AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ + AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; qspi_pins_default: qspi_pins_default { pinctrl-single,pins = < - 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ - 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ - 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ - 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ - 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */ - 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ + AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ + AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ + AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ + AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ + AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */ + AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ >; }; qspi_pins_sleep: qspi_pins_sleep{ pinctrl-single,pins = < - 0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x898, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; }; diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts new file mode 100644 index 000000000..5f750c0ed --- /dev/null +++ b/arch/arm/boot/dts/am437x-sbc-t43.dts @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am437x-cm-t43.dts" +#include "compulab-sb-som.dtsi" + +/ { + model = "CompuLab CM-T43 on SB-SOM-T43"; + compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"; + + aliases { + display0 = &lcd0; + }; +}; + +&am43xx_pinmux { + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM4372_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM4372_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM4372_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM4372_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM4372_IOPAD(0x964, PIN_INPUT | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */ + >; + }; + + dss_pinctrl_default: dss_pinctrl_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */ + AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2) + AM4372_IOPAD(0x9b8, PIN_OUTPUT_PULLUP | MUX_MODE2) + AM4372_IOPAD(0x9bc, PIN_OUTPUT_PULLUP | MUX_MODE2) + AM4372_IOPAD(0x9c0, PIN_OUTPUT_PULLUP | MUX_MODE2) + AM4372_IOPAD(0x9c4, PIN_OUTPUT_PULLUP | MUX_MODE2) + AM4372_IOPAD(0x9c8, PIN_OUTPUT_PULLUP | MUX_MODE2) + AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam1 data 9 -> DSS DATA 16 */ + + AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + AM4372_IOPAD(0xa20, PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; + + uart0_pins_default: uart0_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) + AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) + AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + i2c1_pins: i2c1_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_cs0.i2c1_sda */ + AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_sclk.i2c1_scl */ + >; + }; + + i2c2_pins: i2c2_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + usb2_phy1_default: usb2_phy1_default { + pinctrl-single,pins = < + AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; + + usb2_phy2_default: usb2_phy2_default { + pinctrl-single,pins = < + AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + pca9555: pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom_base: at24@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; +}; + +&mmc1 { + status = "okay"; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vsb_3v3>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pinctrl_default>; + + port { + dpi_lcd_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_default>; +}; + +&dwc3_1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_phy1_default>; +}; + +&dwc3_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_phy2_default>; +}; + +&lcd0 { + enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH + &gpio4 28 GPIO_ACTIVE_HIGH>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 63de2a1b4..d82dd6e3f 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -157,259 +157,259 @@ &am43xx_pinmux { matrix_keypad_pins: matrix_keypad_pins { pinctrl-single,pins = < - 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */ - 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */ - 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */ - 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */ + AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */ + AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */ + AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */ + AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */ >; }; leds_pins: leds_pins { pinctrl-single,pins = < - 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */ - 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */ - 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */ - 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */ + AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */ + AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */ + AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */ + AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */ >; }; i2c0_pins: i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c1_pins: i2c1_pins { pinctrl-single,pins = < - 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - 0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - 0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - 0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; ecap0_pins: backlight_pins { pinctrl-single,pins = < - 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ + AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ >; }; edt_ft5306_ts_pins: edt_ft5306_ts_pins { pinctrl-single,pins = < - 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ - 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */ + AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */ >; }; vpfe0_pins_default: vpfe0_pins_default { pinctrl-single,pins = < - 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ - 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ - 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/ - 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/ - 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ - 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ - 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ - 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ - 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ - 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ - 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ - 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ - 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ - 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ - 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ + AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ + AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ + AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/ + AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/ + AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ + AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ + AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ + AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ + AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ + AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ + AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ + AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ + AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ + AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ + AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ >; }; vpfe0_pins_sleep: vpfe0_pins_sleep { pinctrl-single,pins = < - 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x12c (PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ - 0x114 (PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - 0x128 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - 0x124 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - 0x120 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ - 0x11c (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ - 0x130 (PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ - 0x118 (PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - 0x140 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ - 0x13c (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - 0x138 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ - 0x134 (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ + AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ + AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ + AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ + AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ /* Slave 2 */ - 0x58 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - 0x40 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - 0x54 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - 0x50 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - 0x4c (PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - 0x48 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - 0x5c (PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - 0x44 (PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ - 0x6c (PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ - 0x68 (PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - 0x64 (PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - 0x60 (PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ + AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) /* Slave 2 reset value */ - 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; dss_pins: dss_pins { pinctrl-single,pins = < - 0x020 (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ - 0x024 (PIN_OUTPUT | MUX_MODE1) - 0x028 (PIN_OUTPUT | MUX_MODE1) - 0x02c (PIN_OUTPUT | MUX_MODE1) - 0x030 (PIN_OUTPUT | MUX_MODE1) - 0x034 (PIN_OUTPUT | MUX_MODE1) - 0x038 (PIN_OUTPUT | MUX_MODE1) - 0x03c (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ - 0x0a0 (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */ - 0x0a4 (PIN_OUTPUT | MUX_MODE0) - 0x0a8 (PIN_OUTPUT | MUX_MODE0) - 0x0ac (PIN_OUTPUT | MUX_MODE0) - 0x0b0 (PIN_OUTPUT | MUX_MODE0) - 0x0b4 (PIN_OUTPUT | MUX_MODE0) - 0x0b8 (PIN_OUTPUT | MUX_MODE0) - 0x0bc (PIN_OUTPUT | MUX_MODE0) - 0x0c0 (PIN_OUTPUT | MUX_MODE0) - 0x0c4 (PIN_OUTPUT | MUX_MODE0) - 0x0c8 (PIN_OUTPUT | MUX_MODE0) - 0x0cc (PIN_OUTPUT | MUX_MODE0) - 0x0d0 (PIN_OUTPUT | MUX_MODE0) - 0x0d4 (PIN_OUTPUT | MUX_MODE0) - 0x0d8 (PIN_OUTPUT | MUX_MODE0) - 0x0dc (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */ - 0x0e0 (PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */ - 0x0e4 (PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */ - 0x0e8 (PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */ - 0x0ec (PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */ + AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ + AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) + AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) + AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) + AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) + AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) + AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) + AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ + AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */ + AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) + AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */ + AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */ + AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */ + AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */ + AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */ >; }; qspi_pins: qspi_pins { pinctrl-single,pins = < - 0x7c (PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */ - 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ - 0x90 (PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ - 0x94 (PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ - 0x98 (PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */ - 0x9c (PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ + AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */ + AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ + AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ + AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ + AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */ + AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ >; }; mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ - 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; }; mcasp1_pins_sleep: mcasp1_pins_sleep { pinctrl-single,pins = < - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; lcd_pins: lcd_pins { pinctrl-single,pins = < - 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ + AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ >; }; usb1_pins: usb1_pins { pinctrl-single,pins = < - 0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ + AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ >; }; usb2_pins: usb2_pins { pinctrl-single,pins = < - 0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ + AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ >; }; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 47954ed99..d580e2b70 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -144,228 +144,228 @@ cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ + AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ + AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ + AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */ + AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; nand_flash_x8: nand_flash_x8 { pinctrl-single,pins = < - 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */ - 0x0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */ + AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ + AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; ecap0_pins: backlight_pins { pinctrl-single,pins = < - 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */ - 0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */ + AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */ + AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */ >; }; spi0_pins: pinmux_spi0_pins { pinctrl-single,pins = < - 0x150 (PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */ - 0x154 (PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */ - 0x158 (PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */ - 0x15c (PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */ + AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */ + AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */ + AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ >; }; spi1_pins: pinmux_spi1_pins { pinctrl-single,pins = < - 0x190 (PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */ - 0x194 (PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ - 0x198 (PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */ - 0x19c (PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */ + AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */ + AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ + AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */ + AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; qspi1_default: qspi1_default { pinctrl-single,pins = < - 0x7c (PIN_INPUT_PULLUP | MUX_MODE3) - 0x88 (PIN_INPUT_PULLUP | MUX_MODE2) - 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) - 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) - 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) - 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) + AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3) + AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2) + AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3) + AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3) + AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3) + AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3) >; }; pixcir_ts_pins: pixcir_ts_pins { pinctrl-single,pins = < - 0x44 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ + AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ >; }; hdq_pins: pinmux_hdq_pins { pinctrl-single,pins = < - 0x234 (PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ + AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ >; }; dss_pins: dss_pins { pinctrl-single,pins = < - 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ - 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ - 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ - 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ - 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ - 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ - 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ - 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ + AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1) + AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ + AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ >; }; display_mux_pins: display_mux_pins { pinctrl-single,pins = < /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */ - 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; vpfe1_pins_default: vpfe1_pins_default { pinctrl-single,pins = < - 0x1cc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */ - 0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */ - 0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */ - 0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */ - 0x1dc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */ - 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */ - 0x1ec (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */ - 0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */ - 0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */ - 0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */ - 0x1fc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */ - 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */ - 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */ + AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */ + AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */ + AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */ + AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */ + AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */ + AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */ + AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */ + AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */ + AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */ + AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */ + AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */ + AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */ + AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */ >; }; vpfe1_pins_sleep: vpfe1_pins_sleep { pinctrl-single,pins = < - 0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) - 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) >; }; mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < - 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */ - 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */ - 0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */ - 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */ + AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */ + AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */ + AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */ + AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */ >; }; mcasp1_sleep_pins: mcasp1_sleep_pins { pinctrl-single,pins = < - 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; }; @@ -491,7 +491,7 @@ pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; interrupt-parent = <&gpio1>; - interrupts = <17 0>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 00352e761..a0986c65b 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -173,6 +173,8 @@ sound0_master: simple-audio-card,codec { sound-dai = <&tlv320aic3104>; + assigned-clocks = <&clkoutmux2_clk_mux>; + assigned-clock-parents = <&sys_clk2_dclk_div>; clocks = <&clkout2_clk>; }; }; @@ -181,97 +183,97 @@ &dra7_pmx_core { leds_pins_default: leds_pins_default { pinctrl-single,pins = < - 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */ - 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */ - 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */ - 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */ + DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */ + DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */ + DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */ + DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */ >; }; i2c1_pins_default: i2c1_pins_default { pinctrl-single,pins = < - 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ - 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ + DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ + DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ >; }; hdmi_pins: pinmux_hdmi_pins { pinctrl-single,pins = < - 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ - 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ + DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ + DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ >; }; i2c3_pins_default: i2c3_pins_default { pinctrl-single,pins = < - 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ - 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ + DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ + DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ >; }; uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ - 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ >; }; mmc1_pins_default: mmc1_pins_default { pinctrl-single,pins = < - 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ >; }; mmc2_pins_default: mmc2_pins_default { pinctrl-single,pins = < - 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ >; }; cpsw_pins_default: cpsw_pins_default { pinctrl-single,pins = < /* Slave 1 */ - 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ - 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ - 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ - 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ - 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ - 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ - 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ - 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ - 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ - 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ - 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ - 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ + DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ + DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ + DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ + DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ + DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ + DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ + DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ + DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ + DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ + DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ + DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ + DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ /* Slave 2 */ - 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ - 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ - 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ - 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ - 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ - 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ - 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ - 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ - 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ - 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ - 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ - 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ + DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ + DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ + DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ + DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ + DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ + DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ + DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ + DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ + DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ + DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ + DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ >; }; @@ -279,115 +281,115 @@ cpsw_pins_sleep: cpsw_pins_sleep { pinctrl-single,pins = < /* Slave 1 */ - 0x250 (PIN_INPUT | MUX_MODE15) - 0x254 (PIN_INPUT | MUX_MODE15) - 0x258 (PIN_INPUT | MUX_MODE15) - 0x25c (PIN_INPUT | MUX_MODE15) - 0x260 (PIN_INPUT | MUX_MODE15) - 0x264 (PIN_INPUT | MUX_MODE15) - 0x268 (PIN_INPUT | MUX_MODE15) - 0x26c (PIN_INPUT | MUX_MODE15) - 0x270 (PIN_INPUT | MUX_MODE15) - 0x274 (PIN_INPUT | MUX_MODE15) - 0x278 (PIN_INPUT | MUX_MODE15) - 0x27c (PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15) /* Slave 2 */ - 0x198 (PIN_INPUT | MUX_MODE15) - 0x19c (PIN_INPUT | MUX_MODE15) - 0x1a0 (PIN_INPUT | MUX_MODE15) - 0x1a4 (PIN_INPUT | MUX_MODE15) - 0x1a8 (PIN_INPUT | MUX_MODE15) - 0x1ac (PIN_INPUT | MUX_MODE15) - 0x1b0 (PIN_INPUT | MUX_MODE15) - 0x1b4 (PIN_INPUT | MUX_MODE15) - 0x1b8 (PIN_INPUT | MUX_MODE15) - 0x1bc (PIN_INPUT | MUX_MODE15) - 0x1c0 (PIN_INPUT | MUX_MODE15) - 0x1c4 (PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15) >; }; davinci_mdio_pins_default: davinci_mdio_pins_default { pinctrl-single,pins = < /* MDIO */ - 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */ - 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */ + DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */ + DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */ >; }; davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { pinctrl-single,pins = < - 0x23c (PIN_INPUT | MUX_MODE15) - 0x240 (PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15) >; }; tps659038_pins_default: tps659038_pins_default { pinctrl-single,pins = < - 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ + DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ >; }; tmp102_pins_default: tmp102_pins_default { pinctrl-single,pins = < - 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */ + DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */ >; }; mcp79410_pins_default: mcp79410_pins_default { pinctrl-single,pins = < - 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ + DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ >; }; usb1_pins: pinmux_usb1_pins { pinctrl-single,pins = < - 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ >; }; extcon_usb1_pins: extcon_usb1_pins { pinctrl-single,pins = < - 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ >; }; tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < - 0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ - 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ - 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */ + DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ + DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ + DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */ >; }; clkout2_pins_default: clkout2_pins_default { pinctrl-single,pins = < - 0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */ + DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */ >; }; clkout2_pins_sleep: clkout2_pins_sleep { pinctrl-single,pins = < - 0x294 (PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */ + DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */ >; }; mcasp3_pins_default: mcasp3_pins_default { pinctrl-single,pins = < - 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */ - 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */ - 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */ - 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */ + DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */ + DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */ + DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */ + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */ >; }; mcasp3_pins_sleep: mcasp3_pins_sleep { pinctrl-single,pins = < - 0x324 (PIN_INPUT | MUX_MODE15) - 0x328 (PIN_INPUT | MUX_MODE15) - 0x32c (PIN_INPUT | MUX_MODE15) - 0x330 (PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15) >; }; }; @@ -796,6 +798,8 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mcasp3_pins_default>; pinctrl-1 = <&mcasp3_pins_sleep>; + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&sys_clkin2>; status = "okay"; op-mode = <0>; /* MCASP_IIS_MODE */ diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts new file mode 100644 index 000000000..1c06cb76d --- /dev/null +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -0,0 +1,617 @@ +/* + * Support for CompuLab CL-SOM-AM57x System-on-Module + * + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ + * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "dra74x.dtsi" + +/ { + model = "CompuLab CL-SOM-AM57x"; + compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB - minimal configuration */ + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>; + + led@0 { + label = "cl-som-am57x:green"; + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + vdd_3v3: fixedregulator-vdd_3v3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ads7846reg: fixedregulator-ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "CL-SOM-AM57x-Sound-Card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack", + "Line", "Line Jack"; + simple-audio-card,routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line Jack", + "MICIN", "Mic Bias", + "Mic Bias", "Microphone Jack"; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8731>; + system-clock-frequency = <12000000>; + }; + }; +}; + +&dra7_pmx_core { + leds_pins_default: leds_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14) /* gpmc_a15.gpio2_5 */ + >; + }; + + i2c1_pins_default: i2c1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ + DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ + >; + }; + + i2c3_pins_default: i2c3_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ + DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ + >; + }; + + i2c4_pins_default: i2c4_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10) /* mcasp1_acl.i2c4_sda */ + DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10) /* mcasp1_fsr.i2c4_scl */ + >; + }; + + tps659038_pins_default: tps659038_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + qspi1_pins: pinmux_qspi1_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ + DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d0 */ + DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d1 */ + DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ + DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ + DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ + >; + }; + + cpsw_pins_default: cpsw_pins_default { + pinctrl-single,pins = < + /* Slave at addr 0x0 */ + DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tclk */ + DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tctl */ + DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3 */ + DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td2 */ + DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td1 */ + DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td0 */ + DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */ + DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */ + DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */ + DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */ + DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */ + DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */ + + /* Slave at addr 0x1 */ + DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_tclk */ + DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ + DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ + DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ + DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ + DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ + DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ + DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ + DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ + DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ + DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + >; + }; + + cpsw_pins_sleep: cpsw_pins_sleep { + pinctrl-single,pins = < + /* Slave 1 */ + DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15) + + /* Slave 2 */ + DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15) + >; + }; + + davinci_mdio_pins_default: davinci_mdio_pins_default { + pinctrl-single,pins = < + /* MDIO */ + DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */ + DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d11.mdio_d */ + >; + }; + + davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15) + >; + }; + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */ + >; + }; + + mcasp3_pins_default: mcasp3_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */ + DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */ + DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */ + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */ + >; + }; + + mcasp3_pins_sleep: mcasp3_pins_sleep { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15) + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_default>; + clock-frequency = <400000>; +}; + +&i2c3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_default>; + clock-frequency = <400000>; +}; + +&i2c4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_default>; + clock-frequency = <400000>; + + tps659038: tps659038@58 { + compatible = "ti,tps659038"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tps659038_pins_default>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + tps659038_pmic { + compatible = "ti,tps659038-pmic"; + + regulators { + smps12_reg: smps12 { + /* VDD_MPU */ + regulator-name = "smps12"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps3_reg: smps3 { + /* VDD_DDR */ + regulator-name = "smps3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_DSPEVE */ + regulator-name = "smps45"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_GPU */ + regulator-name = "smps6"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* VDD_CORE */ + regulator-name = "smps7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1160000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_IVA */ + regulator-name = "smps8"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* PMIC_3V3 */ + regulator-name = "smps9"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + + ldo1_reg: ldo1 { + /* VDD_SD / VDDSHV8 */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + /* VDD_1V8 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: ldo9 { + /* VDD_RTC */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1V8_PLL */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + /* regen1 not used */ + }; + }; + + tps659038_pwr_button: tps659038_pwr_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps659038>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + ti,palmas-long-press-seconds = <12>; + }; + + tps659038_gpio: tps659038_gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + rtc0: rtc@56 { + compatible = "emmicro,em3027"; + reg = <0x56>; + }; + + eeprom_module: atmel@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; + + wm8731: wm8731@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8731"; + reg = <0x1a>; + status = "okay"; + }; +}; + +&cpu0 { + cpu0-supply = <&smps12_reg>; + voltage-tolerance = <1>; +}; + +&sata { + status = "okay"; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; + +&mmc2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; + + vmmc-supply = <&vdd_3v3>; + bus-width = <8>; + ti,non-removable; + cap-mmc-dual-data-rate; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi1_pins>; + + spi-max-frequency = <48000000>; + + spi_flash: spi_flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80", "jedec,spi-nor"; + reg = <0>; /* CS0 */ + spi-max-frequency = <48000000>; + + partition@0 { + label = "uboot"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "uboot environment"; + reg = <0xc0000 0x40000>; + }; + + partition@100000 { + label = "reserved"; + reg = <0x100000 0x0>; + }; + }; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <1>; /* CS1 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio1>; + interrupts = <31 0>; + pendown-gpio = <&gpio1 31 0>; + + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + ti,debounce-max = /bits/ 16 <30>; + ti,debounce-tol = /bits/ 16 <10>; + ti,debounce-rep = /bits/ 16 <1>; + + wakeup-source; + }; +}; + +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_pins_default>; + pinctrl-1 = <&cpsw_pins_sleep>; + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; + dual_emac_res_vlan = <0>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii-txid"; + dual_emac_res_vlan = <1>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_pins_default>; + pinctrl-1 = <&davinci_mdio_pins_sleep>; +}; + +&usb2_phy1 { + phy-supply = <&ldousb_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldousb_reg>; +}; + +&usb1 { + dr_mode = "host"; +}; + +&usb2 { + dr_mode = "host"; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins_default>; + pinctrl-1 = <&mcasp3_pins_sleep>; + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; +}; + +&gpio3 { + status = "okay"; + ti,no-reset-on-init; +}; + +&gpio2 { + status = "okay"; + ti,no-reset-on-init; +}; diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts new file mode 100644 index 000000000..988e99632 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -0,0 +1,179 @@ +/* + * Support for CompuLab SBC-AM57x single board computer + * + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ + * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include "am57xx-cl-som-am57x.dts" +#include "compulab-sb-som.dtsi" + +/ { + model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x"; + compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + + aliases { + display0 = &lcd0; + display1 = &hdmi; + }; +}; + +&dra7_pmx_core { + uart3_pins_default: uart3_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ + DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ + >; + }; + + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1_sdcd.gpio6_27 */ + DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14) /* mmc1_sdwp.gpio6_28 */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + >; + }; + + i2c5_pins_default: i2c5_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + >; + }; + + lcd_pins_default: lcd_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14) /* vin2a_vsync0.gpio4_0 */ + >; + }; + + hdmi_pins: pinmux_hdmi_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ + DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ + >; + }; + + hdmi_conn_pins: pinmux_hdmi_conn_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14) /* spi1_cs2.gpio7_12 */ + >; + }; +}; + +&uart3 { + status = "okay"; + interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3f8>; + + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_default>; +}; + +&mmc1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; +}; + +&i2c5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_default>; + clock-frequency = <400000>; + + eeprom_base: atmel@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + pagesize = <16>; + }; + + pca9555: pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&dss { + status = "ok"; + + vdda_video-supply = <&ldoln_reg>; + + port { + dpi_lcd_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&lcd0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins_default>; + + enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH + &gpio4 0 GPIO_ACTIVE_HIGH>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + data-lines = <24>; + }; + }; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo4_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + lanes = <1 0 3 2 5 4 7 6>; + }; + }; +}; + +&hdmi_conn { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_conn_pins>; + + hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; +}; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts new file mode 100644 index 000000000..da755c985 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -0,0 +1,681 @@ +/* + * Copyright 2015 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "skeleton.dtsi" + +/ { + model = "ARM RealView PB11MPcore"; + compatible = "arm,realview-pb11mp"; + + chosen { }; + + aliases { + serial0 = &pb11mp_serial0; + serial1 = &pb11mp_serial1; + serial2 = &pb11mp_serial2; + serial3 = &pb11mp_serial3; + }; + + memory { + /* + * The PB11MPCore has 512 MiB memory @ 0x70000000 + * and the first 256 are also remapped @ 0x00000000 + */ + reg = <0x70000000 0x20000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "arm,realview-smp"; + + MP11_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <0>; + next-level-cache = <&L2>; + }; + + MP11_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <1>; + next-level-cache = <&L2>; + }; + + MP11_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <2>; + next-level-cache = <&L2>; + }; + + MP11_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <3>; + next-level-cache = <&L2>; + }; + }; + + /* Primary TestChip GIC synthesized with the CPU */ + intc_tc11mp: interrupt-controller@1f000100 { + compatible = "arm,tc11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x1f001000 0x1000>, + <0x1f000100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,l220-cache"; + reg = <0x1f002000 0x1000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, + <0 30 IRQ_TYPE_LEVEL_HIGH>, + <0 31 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + /* + * Override default cache size, sets and + * associativity as these may be erroneously set + * up by boot loader(s), probably for safety + * since th outer sync operation can cause the + * cache to hang unless disabled. + */ + cache-size = <1048576>; // 1MB + cache-sets = <4096>; + cache-line-size = <32>; + arm,shared-override; + arm,parity-enable; + arm,outer-sync-disable; + }; + + scu@1f000000 { + compatible = "arm,arm11mp-scu"; + reg = <0x1f000000 0x100>; + }; + + timer@1f000600 { + compatible = "arm,arm11mp-twd-timer"; + reg = <0x1f000600 0x20>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <1 13 0xf04>; + }; + + watchdog@1f000620 { + compatible = "arm,arm11mp-twd-wdt"; + reg = <0x1f000620 0x20>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <1 14 0xf04>; + }; + + /* PMU with one IRQ line per core */ + pmu { + compatible = "arm,arm11mpcore-pmu"; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>, + <0 19 IRQ_TYPE_LEVEL_HIGH>, + <0 20 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>; + }; + + /* The voltage to the MMC card is hardwired at 3.3V */ + vmmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + veth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "veth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + mclk: mclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + kmiclk: kmiclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + sspclk: sspclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + uartclk: uartclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + wdogclk: wdogclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* FIXME: this actually hangs off the PLL clocks */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + flash0@40000000 { + /* 2 * 32MiB NOR Flash memory */ + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0x40000000 0x04000000>; + bank-width = <4>; + }; + + flash1@44000000 { + // 2 * 32MiB NOR Flash memory + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0x44000000 0x04000000>; + bank-width = <4>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,realview-pb11mp-soc", "simple-bus"; + regmap = <&pb11mp_syscon>; + ranges; + + pb11mp_syscon: syscon@10000000 { + compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd"; + reg = <0x10000000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + linux,default-trigger = "cpu1"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + linux,default-trigger = "cpu2"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + linux,default-trigger = "cpu3"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; + + oscclk0: osc0@0c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x0C>; + clocks = <&xtal24mhz>; + }; + oscclk1: osc1@10 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x10>; + clocks = <&xtal24mhz>; + }; + oscclk2: osc2@14 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x14>; + clocks = <&xtal24mhz>; + }; + oscclk3: osc3@18 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x18>; + clocks = <&xtal24mhz>; + }; + oscclk4: osc4@1c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x1c>; + clocks = <&xtal24mhz>; + }; + oscclk5: osc5@d4 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0xd4>; + clocks = <&xtal24mhz>; + }; + oscclk6: osc6@d8 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0xd8>; + clocks = <&xtal24mhz>; + }; + }; + + sp810_syscon: sysctl@10001000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x10001000 0x1000>; + clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclk0", + "timerclk1", + "timerclk2", + "timerclk3"; + assigned-clocks = <&sp810_syscon 0>, + <&sp810_syscon 1>, + <&sp810_syscon 2>, + <&sp810_syscon 3>; + assigned-clock-parents = <&timclk>, + <&timclk>, + <&timclk>, + <&timclk>; + }; + + i2c0: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + aaci: aaci@10004000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x10004000 0x1000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + mci: mmcsd@10005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x10005000 0x1000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>; + /* Due to frequent FIFO overruns, use just 500 kHz */ + max-frequency = <500000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + clocks = <&mclk>, <&pclk>; + clock-names = "mclk", "apb_pclk"; + vmmc-supply = <&vmmc>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + kmi0: kmi@10006000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10006000 0x1000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi1: kmi@10007000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10007000 0x1000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + pb11mp_serial0: serial@10009000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x10009000 0x1000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb11mp_serial1: serial@1000a000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000a000 0x1000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb11mp_serial2: serial@1000b000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000b000 0x1000>; + interrupt-parent = <&intc_pb11mp>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb11mp_serial3: serial@1000c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000c000 0x1000>; + interrupt-parent = <&intc_pb11mp>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + ssp@1000d000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1000d000 0x1000>; + interrupt-parent = <&intc_pb11mp>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sspclk>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; + }; + + watchdog@1000f000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x1000f000 0x1000>; + interrupt-parent = <&intc_pb11mp>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wdogclk>, <&pclk>; + clock-names = "wdogclk", "apb_pclk"; + status = "disabled"; + }; + + watchdog@10010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x10010000 0x1000>; + interrupt-parent = <&intc_pb11mp>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wdogclk>, <&pclk>; + clock-names = "wdogclk", "apb_pclk"; + }; + + timer01: timer@10011000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10011000 0x1000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>; + arm,sp804-has-irq = <1>; + clocks = <&sp810_syscon 0>, + <&sp810_syscon 1>, + <&pclk>; + clock-names = "timerclk0", + "timerclk1", + "apb_pclk"; + }; + + timer23: timer@10012000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10012000 0x1000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; + arm,sp804-has-irq = <1>; + clocks = <&sp810_syscon 2>, + <&sp810_syscon 3>, + <&pclk>; + clock-names = "timerclk2", + "timerclk3", + "apb_pclk"; + }; + + gpio0: gpio@10013000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10013000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_pb11mp>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@10014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10014000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_pb11mp>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@10015000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10015000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_pb11mp>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + rtc: rtc@10017000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10017000 0x1000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + timer45: timer@10018000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10018000 0x1000>; + clocks = <&timclk>, <&pclk>; + clock-names = "timer", "apb_pclk"; + status = "disabled"; + }; + + timer67: timer@10019000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10019000 0x1000>; + clocks = <&timclk>, <&pclk>; + clock-names = "timer", "apb_pclk"; + status = "disabled"; + }; + + + clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-parent = <&intc_pb11mp>; + interrupt-names = "combined"; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&oscclk4>, <&pclk>; + clock-names = "clcdclk", "apb_pclk"; + max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <63500127>; + hactive = <1024>; + hback-porch = <152>; + hfront-porch = <48>; + hsync-len = <104>; + vactive = <768>; + vback-porch = <23>; + vfront-porch = <3>; + vsync-len = <4>; + }; + }; + }; + + /* + * This GIC on the Platform Baseboard is cascaded off the + * TestChip GIC + */ + intc_pb11mp: interrupt-controller@1e000000 { + compatible = "arm,arm11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x1e001000 0x1000>, + <0x1e000000 0x100>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* SMSC 9118 ethernet with PHY and EEPROM */ + ethernet@4e000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x4e000000 0x10000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&veth>; + vddvario-supply = <&veth>; + }; + + usb@4f000000 { + compatible = "nxp,usb-isp1761"; + reg = <0x4f000000 0x20000>; + interrupt-parent = <&intc_tc11mp>; + interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; + port1-otg; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 5555875f4..39181b3fa 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -127,7 +127,7 @@ isl12057: isl12057@68 { compatible = "isil,isl12057"; reg = <0x68>; - isil,irq2-can-wakeup-machine; + wakeup-source; }; g762: g762@3e { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 78b563c02..faa474874 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -133,7 +133,7 @@ isl12057: isl12057@68 { compatible = "isil,isl12057"; reg = <0x68>; - isil,irq2-can-wakeup-machine; + wakeup-source; }; g762: g762@3e { diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts new file mode 100644 index 000000000..c6e180eb3 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -0,0 +1,456 @@ +/* + * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828) + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-388.dtsi" +#include "armada-38x-solidrun-microsom.dtsi" + +/ { + model = "SolidRun Clearfog A1"; + compatible = "solidrun,clearfog-a1", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; + + aliases { + /* So that mvebu u-boot can update the MAC addresses */ + ethernet1 = ð0; + ethernet2 = ð1; + ethernet3 = ð2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + soc { + internal-regs { + ethernet@30000 { + phy-mode = "sgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet@34000 { + phy-mode = "sgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + i2c@11000 { + /* Is there anything on this? */ + clock-frequency = <100000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* + * PCA9655 GPIO expander, up to 1MHz clock. + * 0-CON3 CLKREQ# + * 1-CON3 PERST# + * 2-CON2 PERST# + * 3-CON3 W_DISABLE + * 4-CON2 CLKREQ# + * 5-USB3 overcurrent + * 6-USB3 power + * 7-CON2 W_DISABLE + * 8-JP4 P1 + * 9-JP4 P4 + * 10-JP4 P5 + * 11-m.2 DEVSLP + * 12-SFP_LOS + * 13-SFP_TX_FAULT + * 14-SFP_TX_DISABLE + * 15-SFP_MOD_DEF0 + */ + expander0: gpio-expander@20 { + /* + * This is how it should be: + * compatible = "onnn,pca9655", + * "nxp,pca9555"; + * but you can't do this because of + * the way I2C works. + */ + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + + pcie1_0_clkreq { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie1.0-clkreq"; + }; + pcie1_0_w_disable { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie1.0-w-disable"; + }; + pcie2_0_clkreq { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie2.0-clkreq"; + }; + pcie2_0_w_disable { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie2.0-w-disable"; + }; + usb3_ilimit { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + input; + line-name = "usb3-current-limit"; + }; + usb3_power { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb3-power"; + }; + m2_devslp { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "m.2 devslp"; + }; + sfp_los { + /* SFP loss of signal */ + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + input; + line-name = "sfp-los"; + }; + sfp_tx_fault { + /* SFP laser fault */ + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + input; + line-name = "sfp-tx-fault"; + }; + sfp_tx_disable { + /* SFP transmit disable */ + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "sfp-tx-disable"; + }; + sfp_mod_def0 { + /* SFP module present */ + gpio-hog; + gpios = <15 GPIO_ACTIVE_LOW>; + input; + line-name = "sfp-mod-def0"; + }; + }; + + /* The MCP3021 is 100kHz clock only */ + mikrobus_adc: mcp3021@4c { + compatible = "microchip,mcp3021"; + reg = <0x4c>; + }; + + /* Also something at 0x64 */ + }; + + i2c@11100 { + /* + * Routed to SFP, mikrobus, and PCIe. + * SFP limits this to 100kHz, and requires + * an AT24C01A/02/04 with address pins tied + * low, which takes addresses 0x50 and 0x51. + * Mikrobus doesn't specify beyond an I2C + * bus being present. + * PCIe uses ARP to assign addresses, or + * 0x63-0x64. + */ + clock-frequency = <100000>; + pinctrl-0 = <&clearfog_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + mdio@72004 { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy_dedicated: ethernet-phy@0 { + /* + * Annoyingly, the marvell phy driver + * configures the LED register, rather + * than preserving reset-loaded setting. + * We undo that rubbish here. + */ + marvell,reg-init = <3 16 0 0x101e>; + reg = <0>; + }; + }; + + pinctrl@18000 { + clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { + marvell,pins = "mpp46"; + marvell,function = "ref"; + }; + clearfog_dsa0_pins: clearfog-dsa0-pins { + marvell,pins = "mpp23", "mpp41"; + marvell,function = "gpio"; + }; + clearfog_i2c1_pins: i2c1-pins { + /* SFP, PCIe, mSATA, mikrobus */ + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c1"; + }; + clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + clearfog_sdhci_pins: clearfog-sdhci-pins { + marvell,pins = "mpp21", "mpp28", + "mpp37", "mpp38", + "mpp39", "mpp40"; + marvell,function = "sd0"; + }; + clearfog_spi1_cs_pins: spi1-cs-pins { + marvell,pins = "mpp55"; + marvell,function = "spi1"; + }; + mikro_pins: mikro-pins { + /* int: mpp22 rst: mpp29 */ + marvell,pins = "mpp22", "mpp29"; + marvell,function = "gpio"; + }; + mikro_spi_pins: mikro-spi-pins { + marvell,pins = "mpp43"; + marvell,function = "spi1"; + }; + mikro_uart_pins: mikro-uart-pins { + marvell,pins = "mpp24", "mpp25"; + marvell,function = "ua1"; + }; + rear_button_pins: rear-button-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + }; + + sata@a8000 { + /* pinctrl? */ + status = "okay"; + }; + + sata@e0000 { + /* pinctrl? */ + status = "okay"; + }; + + sdhci@d8000 { + bus-width = <4>; + cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-0 = <&clearfog_sdhci_pins + &clearfog_sdhci_cd_pins>; + pinctrl-names = "default"; + status = "okay"; + vmmc = <®_3p3v>; + wp-inverted; + }; + + serial@12100 { + /* mikrobus uart */ + pinctrl-0 = <&mikro_uart_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + spi@10680 { + /* + * We don't seem to have the W25Q32 on the + * A1 Rev 2.0 boards, so disable SPI. + * CS0: W25Q32 (doesn't appear to be present) + * CS1: + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins + &clearfog_spi1_cs_pins + &mikro_spi_pins>; + pinctrl-names = "default"; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "w25q32", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <3000000>; + status = "disabled"; + }; + }; + + usb@58000 { + /* CON3, nearest power. */ + status = "okay"; + }; + + usb3@f0000 { + /* CON2, nearest CPU, USB2 only. */ + status = "okay"; + }; + + usb3@f8000 { + /* CON7 */ + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * the mini-PCIe connectors on the board. + */ + pcie@2,0 { + /* Port 1, Lane 0. CON3, nearest power. */ + reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + pcie@3,0 { + /* Port 2, Lane 0. CON2, nearest CPU. */ + reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + }; + }; + + dsa@0 { + compatible = "marvell,dsa"; + dsa,ethernet = <ð1>; + dsa,mii-bus = <&mdio>; + pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; + pinctrl-names = "default"; + #address-cells = <2>; + #size-cells = <0>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4 0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "lan5"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + + port@6 { + /* 88E1512 external phy */ + reg = <6>; + label = "lan6"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; + pinctrl-names = "default"; + + button_0 { + /* The rear SW3 button */ + label = "Rear Button"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi new file mode 100644 index 000000000..3f792a563 --- /dev/null +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -0,0 +1,115 @@ +/* + * Device Tree file for SolidRun Armada 38x Microsom + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* 256 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + + internal-regs { + ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy_dedicated>; + phy-mode = "rgmii-id"; + status = "okay"; + }; + + mdio@72004 { + /* + * Add the phy clock here, so the phy can be + * accessed to read its IDs prior to binding + * with the driver. + */ + pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>; + pinctrl-names = "default"; + + phy_dedicated: ethernet-phy@0 { + /* + * Annoyingly, the marvell phy driver + * configures the LED register, rather + * than preserving reset-loaded setting. + * We undo that rubbish here. + */ + marvell,reg-init = <3 16 0 0x101e>; + reg = <0>; + }; + }; + + pinctrl@18000 { + microsom_phy_clk_pins: microsom-phy-clk-pins { + marvell,pins = "mpp45"; + marvell,function = "ref"; + }; + }; + + rtc@a3800 { + /* + * If the rtc doesn't work, run "date reset" + * twice in u-boot. + */ + status = "okay"; + }; + + serial@12000 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 23fc670c0..5c21b2367 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -70,8 +70,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index f77410141..ebe1d2674 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -76,8 +76,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 4878d7353..5730b875c 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -95,8 +95,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 58b500873..8af463f26 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -65,8 +65,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; @@ -151,42 +151,43 @@ marvell,nand-enable-arbiter; nand-on-flash-bbt; - partition@0 { - label = "u-boot"; - reg = <0x0000000 0xe0000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0xe0000 0x20000>; - read-only; - }; - - partition@100000 { - label = "u-boot-env2"; - reg = <0x100000 0x20000>; - read-only; - }; - - partition@120000 { - label = "zImage"; - reg = <0x120000 0x400000>; - }; - - partition@520000 { - label = "initrd"; - reg = <0x520000 0x400000>; - }; - - partition@xE00000 { - label = "boot"; - reg = <0xE00000 0x3F200000>; - }; - - partition@flash { - label = "flash"; - reg = <0x0 0x40000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x000e0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x000e0000 0x00020000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env2"; + reg = <0x00100000 0x00020000>; + read-only; + }; + + partition@120000 { + label = "zImage"; + reg = <0x00120000 0x00400000>; + }; + + partition@520000 { + label = "initrd"; + reg = <0x00520000 0x00400000>; + }; + + partition@e00000 { + label = "boot"; + reg = <0x00e00000 0x3f200000>; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 6e9820e14..b89e6cf12 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -70,8 +70,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 6ab33837a..6522b04f4 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -68,8 +68,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 6fe8972de..d19f44c70 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -64,8 +64,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; @@ -141,7 +141,7 @@ isl12057: isl12057@68 { compatible = "isil,isl12057"; reg = <0x68>; - isil,irq2-can-wakeup-machine; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index a5db17782..853bd392a 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -65,9 +65,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000 + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 2391b11dc..d17dab0a6 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -78,8 +78,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index e74df327c..e683856c5 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -114,9 +114,25 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_default>; + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioA>; + interrupts = <73 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + pdmic@f8018000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdmic_default>; + atmel,model = "PDMIC @ sama5d2_xplained"; + atmel,mic-min-freq = <1000000>; + atmel,mic-max-freq = <3246000>; + atmel,mic-offset = <0x0>; + status = "okay"; }; uart1: serial@f8020000 { @@ -129,6 +145,7 @@ dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0_default>; + i2c-sda-hold-time-ns = <350>; status = "okay"; pmic: act8865@5b { @@ -207,6 +224,10 @@ }; }; + watchdog@f8048040 { + status = "okay"; + }; + uart3: serial@fc008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_default>; @@ -285,6 +306,16 @@ bias-disable; }; + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = <PIN_PC9__GPIO>; + }; + + pinctrl_pdmic_default: pdmic_default { + pinmux = <PIN_PB26__PDMIC_DAT>, + <PIN_PB27__PDMIC_CLK>; + bias-disable; + }; + pinctrl_sdmmc0_default: sdmmc0_default { cmd_data { pinmux = <PIN_PA1__SDMMC0_CMD>, diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi new file mode 100644 index 000000000..e7b2109fc --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2015 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "sama5d4.dtsi" + +/ { + model = "DENX MA5D4"; + compatible = "denx,ma5d4", "atmel,sama5d4", "atmel,sama5"; + + memory { + reg = <0x20000000 0x10000000>; + }; + + clocks { + main_clock: main_clock { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + + clk20m: clk20m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + clock-output-names = "clk20m"; + }; + }; + + ahb { + apb { + mmc0: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; + vmmc-supply = <&vcc_mmc0_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <8>; + broken-cd; + }; + }; + + spi0: spi@f8010000 { + cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; + status = "okay"; + + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + i2c0: i2c@f8014000 { + status = "okay"; + }; + + spi1: spi@fc018000 { + cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk20m>; + interrupt-parent = <&pioE>; + interrupts = <6 GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + }; + + can1: can@1 { + compatible = "microchip,mcp2515"; + reg = <1>; + clocks = <&clk20m>; + interrupt-parent = <&pioE>; + interrupts = <7 GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + }; + }; + + adc0: adc@fc034000 { + pinctrl-names = "default"; + pinctrl-0 = < + /* external trigger conflicts with USBA_VBUS */ + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + atmel,adc-vref = <3300>; + status = "okay"; + }; + + watchdog@fc068640 { + status = "okay"; + }; + }; + }; + + vcc_3v3_reg: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCC 3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_mmc0_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + gpio = <&pioE 15 GPIO_ACTIVE_HIGH>; + regulator-name = "RST_n MCI0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_reg>; + regulator-boot-on; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts new file mode 100644 index 000000000..abaaba58f --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2015 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "at91-sama5d4_ma5d4.dtsi" + +/ { + model = "DENX MA5D4EVK"; + compatible = "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5"; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + ahb { + usb0: gadget@00400000 { + atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00500000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 11 GPIO_ACTIVE_LOW + &pioE 14 GPIO_ACTIVE_LOW + >; + status = "okay"; + }; + + usb2: ehci@00600000 { + status = "okay"; + }; + + apb { + hlcdc: hlcdc@f0000000 { + status = "okay"; + + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + }; + + macb0: ethernet@f8020000 { + phy-mode = "rmii"; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + usart0: serial@f802c000 { + status = "okay"; + }; + + usart1: serial@f8030000 { + status = "okay"; + }; + + mmc1: mmc@fc000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 5 0>; + }; + }; + + adc0: adc@fc034000 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + }; + + + pinctrl@fc06a000 { + board { + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + }; + }; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + + user1 { + label = "user1"; + gpios = <&pioD 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user2 { + label = "user2"; + gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user3 { + label = "user3"; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + panel: panel { + /* Actually Ampire 800480R2 */ + compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; + backlight = <&backlight>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + vcc_mmc1_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + gpio = <&pioE 17 GPIO_ACTIVE_LOW>; + regulator-name = "VDD MCI1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_reg>; + }; +}; diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts new file mode 100644 index 000000000..79aec55e1 --- /dev/null +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -0,0 +1,256 @@ +/* + * Device Tree file for VInCo platform + * + * Copyright (C) 2014 Atmel, + * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> + * 2015 Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "sama5d4.dtsi" + +/ { + model = "L+G VInCo platform"; + compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + + adc0: adc@fc034000 { + status = "okay"; /* Enable ADC IIO support */ + }; + + mmc0: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 + &pinctrl_mmc0_dat1_3 + &pinctrl_mmc0_dat4_7>; + vqmmc-supply = <&vcc_3v3_reg>; + vmmc-supply = <&vcc_3v3_reg>; + no-1-8-v; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <8>; + non-removable; + broken-cd; + status = "okay"; + }; + }; + + spi0: spi@f8010000 { + cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; + status = "okay"; + m25p80@0 { + compatible = "n25q32b", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + i2c0: i2c@f8014000 { + status = "okay"; + }; + + i2c1: i2c@f8018000 { + status = "okay"; + /* kerkey security module */ + }; + + macb0: ethernet@f8020000 { + phy-mode = "rmii"; + status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + reset-gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&pioB>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + }; + + }; + + i2c2: i2c@f8024000 { + status = "okay"; + + rtc1: rtc@64 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + }; + + usart2: serial@fc008000 { + /* MBUS */ + status = "okay"; + }; + + usart3: serial@fc00c000 { + /* debug */ + status = "okay"; + }; + + usart4: serial@fc010000 { + /* LMN */ + pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + macb1: ethernet@fc028000 { + phy-mode = "rmii"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pioE 6 GPIO_ACTIVE_HIGH>; + }; + }; + + watchdog@fc068640 { + status = "okay"; + }; + + pinctrl@fc06a000 { + board { + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + }; + }; + }; + + usb0: gadget@00400000 { + atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "disable"; + }; + + usb1: ohci@00500000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 11 GPIO_ACTIVE_LOW + &pioE 12 GPIO_ACTIVE_LOW + >; + status = "disable"; + }; + + usb2: ehci@00600000 { + /* 4G Modem */ + status = "okay"; + }; + + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + + led_err { + label = "err"; + gpios = <&pioA 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_rssi { + label = "rssi"; + gpios = <&pioA 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_tls { + label = "tls"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_lmc { + label = "lmc"; + gpios = <&pioA 25 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_wmt { + label = "wmt"; + gpios = <&pioA 29 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_pwr { + label = "pwr"; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + }; + + vcc_3v3_reg: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCC 3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index ca4ddf868..626c67d66 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -215,7 +215,7 @@ }; panel: panel { - compatible = "qd,qd43003c0-40", "simple-panel"; + compatible = "qiaodian,qd43003c0-40", "simple-panel"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 277853350..387879336 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -91,6 +91,23 @@ #address-cells = <1>; #size-cells = <1>; + pcie_phy: phy@0301d0a0 { + compatible = "brcm,cygnus-pcie-phy"; + reg = <0x0301d0a0 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + pcie0_phy: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + pcie1_phy: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; + pinctrl: pinctrl@0x0301d0c8 { compatible = "brcm,cygnus-pinmux"; reg = <0x0301d0c8 0x30>, @@ -101,6 +118,7 @@ compatible = "brcm,cygnus-crmu-gpio"; reg = <0x03024800 0x50>, <0x03024008 0x18>; + ngpios = <6>; #gpio-cells = <2>; gpio-controller; }; @@ -127,6 +145,7 @@ compatible = "brcm,cygnus-ccm-gpio"; reg = <0x1800a000 0x50>, <0x0301d164 0x20>; + ngpios = <24>; #gpio-cells = <2>; gpio-controller; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; @@ -161,7 +180,21 @@ ranges = <0x81000000 0 0 0x28000000 0 0x00010000 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + phys = <&pcie0_phy>; + phy-names = "pcie-phy"; + status = "disabled"; + + msi-parent = <&msi0>; + msi0: msi@18012000 { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>, + <GIC_SPI 97 IRQ_TYPE_NONE>, + <GIC_SPI 98 IRQ_TYPE_NONE>, + <GIC_SPI 99 IRQ_TYPE_NONE>; + }; }; pcie1: pcie@18013000 { @@ -182,7 +215,21 @@ ranges = <0x81000000 0 0 0x48000000 0 0x00010000 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + phys = <&pcie1_phy>; + phy-names = "pcie-phy"; + status = "disabled"; + + msi-parent = <&msi1>; + msi1: msi@18013000 { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>, + <GIC_SPI 103 IRQ_TYPE_NONE>, + <GIC_SPI 104 IRQ_TYPE_NONE>, + <GIC_SPI 105 IRQ_TYPE_NONE>; + }; }; uart0: serial@18020000 { @@ -245,13 +292,63 @@ gpio_asiu: gpio@180a5000 { compatible = "brcm,cygnus-asiu-gpio"; reg = <0x180a5000 0x668>; + ngpios = <146>; #gpio-cells = <2>; gpio-controller; - pinmux = <&pinctrl>; - interrupt-controller; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 42 1>, + <&pinctrl 1 44 3>, + <&pinctrl 4 48 1>, + <&pinctrl 5 50 3>, + <&pinctrl 8 126 1>, + <&pinctrl 9 155 1>, + <&pinctrl 10 152 1>, + <&pinctrl 11 154 1>, + <&pinctrl 12 153 1>, + <&pinctrl 13 127 3>, + <&pinctrl 16 140 1>, + <&pinctrl 17 145 7>, + <&pinctrl 24 130 10>, + <&pinctrl 34 141 4>, + <&pinctrl 38 54 1>, + <&pinctrl 39 56 3>, + <&pinctrl 42 60 3>, + <&pinctrl 45 64 3>, + <&pinctrl 48 68 2>, + <&pinctrl 50 84 6>, + <&pinctrl 56 94 6>, + <&pinctrl 62 72 1>, + <&pinctrl 63 70 1>, + <&pinctrl 64 80 1>, + <&pinctrl 65 74 3>, + <&pinctrl 68 78 1>, + <&pinctrl 69 82 1>, + <&pinctrl 70 156 17>, + <&pinctrl 87 104 12>, + <&pinctrl 99 102 2>, + <&pinctrl 101 90 4>, + <&pinctrl 105 116 6>, + <&pinctrl 111 100 2>, + <&pinctrl 113 122 4>, + <&pinctrl 123 11 1>, + <&pinctrl 124 38 4>, + <&pinctrl 128 43 1>, + <&pinctrl 129 47 1>, + <&pinctrl 130 49 1>, + <&pinctrl 131 53 1>, + <&pinctrl 132 55 1>, + <&pinctrl 133 59 1>, + <&pinctrl 134 63 1>, + <&pinctrl 135 67 1>, + <&pinctrl 136 71 1>, + <&pinctrl 137 73 1>, + <&pinctrl 138 77 1>, + <&pinctrl 139 79 1>, + <&pinctrl 140 81 1>, + <&pinctrl 141 83 1>, + <&pinctrl 142 10 1>; }; touchscreen: tsc@180a6000 { diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 58aca277e..10bdef557 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -32,6 +32,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/bcm-nsp.h> #include "skeleton.dtsi" @@ -40,9 +41,30 @@ model = "Broadcom Northstar Plus SoC"; interrupt-parent = <&gic>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + enable-method = "brcm,bcm-nsp-smp"; + secondary-boot-reg = <0xffff042c>; + reg = <0x1>; + }; + }; + mpcore { compatible = "simple-bus"; - ranges = <0x00000000 0x19020000 0x00003000>; + ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; #size-cells = <1>; @@ -58,27 +80,50 @@ }; }; - L2: l2-cache { - compatible = "arm,pl310-cache"; - reg = <0x2000 0x1000>; - cache-unified; - cache-level = <2>; + a9pll: arm_clk@00000 { + #clock-cells = <0>; + compatible = "brcm,nsp-armpll"; + clocks = <&osc>; + reg = <0x00000 0x1000>; + }; + + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + }; + + twd-timer@20600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&periph_clk>; + }; + + twd-watchdog@20620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x20620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&periph_clk>; }; - gic: interrupt-controller@19021000 { + gic: interrupt-controller@21000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0x1000 0x1000>, - <0x0100 0x100>; + reg = <0x21000 0x1000>, + <0x20100 0x100>; }; - timer@19020200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x0200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&periph_clk>; + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + cache-level = <2>; }; }; @@ -87,33 +132,178 @@ #size-cells = <1>; ranges; - periph_clk: periph_clk { + osc: oscillator { + #clock-cells = <0>; compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + iprocmed: iprocmed { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; + clock-div = <2>; + clock-mult = <1>; + }; + + iprocslow: iprocslow { #clock-cells = <0>; - clock-frequency = <500000000>; + compatible = "fixed-factor-clock"; + clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; + clock-div = <4>; + clock-mult = <1>; + }; + + periph_clk: periph_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&a9pll>; + clock-div = <2>; + clock-mult = <1>; }; }; axi { compatible = "simple-bus"; - ranges = <0x00000000 0x18000000 0x00001000>; + ranges = <0x00000000 0x18000000 0x0011ba08>; #address-cells = <1>; #size-cells = <1>; - uart0: serial@18000300 { + uart0: serial@0300 { compatible = "ns16550a"; reg = <0x0300 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <62499840>; + clocks = <&osc>; status = "disabled"; }; - uart1: serial@18000400 { + uart1: serial@0400 { compatible = "ns16550a"; reg = <0x0400 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <62499840>; + clocks = <&osc>; + status = "disabled"; + }; + + pcie0: pcie@12000 { + compatible = "brcm,iproc-pcie"; + reg = <0x12000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie1: pcie@13000 { + compatible = "brcm,iproc-pcie"; + reg = <0x13000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie2: pcie@14000 { + compatible = "brcm,iproc-pcie"; + reg = <0x14000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; + + linux,pci-domain = <2>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; + status = "disabled"; }; + + nand: nand@26000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x026000 0x600>, + <0x11b408 0x600>, + <0x026f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + + i2c0: i2c@38000 { + compatible = "brcm,iproc-i2c"; + reg = <0x38000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + }; + + lcpll0: lcpll0@3f100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; + reg = <0x3f100 0x14>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", "sdio", + "ddr_phy"; + }; + + genpll: genpll@3f140 { + #clock-cells = <1>; + compatible = "brcm,nsp-genpll"; + reg = <0x3f140 0x24>; + clocks = <&osc>; + clock-output-names = "genpll", "phy", "ethernetclk", + "usbclk", "iprocfast", "sata1", + "sata2"; + }; + + pinctrl: pinctrl@3f1c0 { + compatible = "brcm,nsp-pinmux"; + reg = <0x3f1c0 0x04>, + <0x30028 0x04>, + <0x3f408 0x04>; + }; }; }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 2ddaa5136..3dc7a8cc5 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -31,7 +31,6 @@ #address-cells = <1>; #size-cells = <0>; enable-method = "brcm,bcm11351-cpu-method"; - secondary-boot-reg = <0x3500417c>; cpu0: cpu@0 { device_type = "cpu"; @@ -42,6 +41,7 @@ cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; + secondary-boot-reg = <0x3500417c>; reg = <1>; }; }; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 2016b72a8..3f525be28 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -31,7 +31,6 @@ #address-cells = <1>; #size-cells = <0>; enable-method = "brcm,bcm11351-cpu-method"; - secondary-boot-reg = <0x35004178>; cpu0: cpu@0 { device_type = "cpu"; @@ -42,6 +41,7 @@ cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; + secondary-boot-reg = <0x35004178>; reg = <1>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index b2bff43b1..228614fff 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -1,4 +1,5 @@ /dts-v1/; +#include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" / { diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 668442b1b..ef5405025 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -1,4 +1,5 @@ /dts-v1/; +#include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" / { diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index eab8b5916..86f1f2f59 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -1,4 +1,5 @@ /dts-v1/; +#include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" / { diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index ff6b2d1c6..4859e9d81 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -1,4 +1,5 @@ /dts-v1/; +#include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" / { diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 3572f0367..3afb9fefe 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -1,5 +1,3 @@ -#include "bcm2835.dtsi" - / { memory { reg = <0 0x10000000>; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index aef64de77..b83b32639 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,206 +1,14 @@ -#include <dt-bindings/pinctrl/bcm2835.h> -#include <dt-bindings/clock/bcm2835.h> -#include "skeleton.dtsi" +#include "bcm283x.dtsi" / { compatible = "brcm,bcm2835"; - model = "BCM2835"; - interrupt-parent = <&intc>; - - chosen { - bootargs = "earlyprintk console=ttyAMA0"; - }; soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; ranges = <0x7e000000 0x20000000 0x02000000>; dma-ranges = <0x40000000 0x00000000 0x20000000>; - timer@7e003000 { - compatible = "brcm,bcm2835-system-timer"; - reg = <0x7e003000 0x1000>; - interrupts = <1 0>, <1 1>, <1 2>, <1 3>; - /* This could be a reference to BCM2835_CLOCK_TIMER, - * but we don't have the driver using the common clock - * support yet. - */ - clock-frequency = <1000000>; - }; - - dma: dma@7e007000 { - compatible = "brcm,bcm2835-dma"; - reg = <0x7e007000 0xf00>; - interrupts = <1 16>, - <1 17>, - <1 18>, - <1 19>, - <1 20>, - <1 21>, - <1 22>, - <1 23>, - <1 24>, - <1 25>, - <1 26>, - <1 27>, - <1 28>; - - #dma-cells = <1>; - brcm,dma-channel-mask = <0x7f35>; - }; - - intc: interrupt-controller@7e00b200 { - compatible = "brcm,bcm2835-armctrl-ic"; - reg = <0x7e00b200 0x200>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - watchdog@7e100000 { - compatible = "brcm,bcm2835-pm-wdt"; - reg = <0x7e100000 0x28>; - }; - - clocks: cprman@7e101000 { - compatible = "brcm,bcm2835-cprman"; - #clock-cells = <1>; - reg = <0x7e101000 0x2000>; - - /* CPRMAN derives everything from the platform's - * oscillator. - */ - clocks = <&clk_osc>; - }; - - rng@7e104000 { - compatible = "brcm,bcm2835-rng"; - reg = <0x7e104000 0x10>; - }; - - mailbox: mailbox@7e00b800 { - compatible = "brcm,bcm2835-mbox"; - reg = <0x7e00b880 0x40>; - interrupts = <0 1>; - #mbox-cells = <0>; - }; - - gpio: gpio@7e200000 { - compatible = "brcm,bcm2835-gpio"; - reg = <0x7e200000 0xb4>; - /* - * The GPIO IP block is designed for 3 banks of GPIOs. - * Each bank has a GPIO interrupt for itself. - * There is an overall "any bank" interrupt. - * In order, these are GIC interrupts 17, 18, 19, 20. - * Since the BCM2835 only has 2 banks, the 2nd bank - * interrupt output appears to be mirrored onto the - * 3rd bank's interrupt signal. - * So, a bank0 interrupt shows up on 17, 20, and - * a bank1 interrupt shows up on 18, 19, 20! - */ - interrupts = <2 17>, <2 18>, <2 19>, <2 20>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - uart0: uart@7e201000 { - compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; - reg = <0x7e201000 0x1000>; - interrupts = <2 25>; - clocks = <&clocks BCM2835_CLOCK_UART>, - <&clocks BCM2835_CLOCK_VPU>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - }; - - i2s: i2s@7e203000 { - compatible = "brcm,bcm2835-i2s"; - reg = <0x7e203000 0x20>, - <0x7e101098 0x02>; - - dmas = <&dma 2>, - <&dma 3>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi: spi@7e204000 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204000 0x1000>; - interrupts = <2 22>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@7e205000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e205000 0x1000>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - sdhci: sdhci@7e300000 { - compatible = "brcm,bcm2835-sdhci"; - reg = <0x7e300000 0x100>; - interrupts = <2 30>; - clocks = <&clocks BCM2835_CLOCK_EMMC>; - status = "disabled"; - }; - - i2c1: i2c@7e804000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e804000 0x1000>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@7e805000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e805000 0x1000>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - usb@7e980000 { - compatible = "brcm,bcm2835-usb"; - reg = <0x7e980000 0x10000>; - interrupts = <1 9>; - }; - arm-pmu { compatible = "arm,arm1176-pmu"; }; }; - - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - /* The oscillator is the root of the clock tree. */ - clk_osc: clock@3 { - compatible = "fixed-clock"; - reg = <3>; - #clock-cells = <0>; - clock-output-names = "osc"; - clock-frequency = <19200000>; - }; - - }; }; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts new file mode 100644 index 000000000..ff946661b --- /dev/null +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -0,0 +1,35 @@ +/dts-v1/; +#include "bcm2836.dtsi" +#include "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; + model = "Raspberry Pi 2 Model B"; + + memory { + reg = <0 0x40000000>; + }; + + leds { + act { + gpios = <&gpio 47 0>; + }; + + pwr { + label = "PWR"; + gpios = <&gpio 35 0>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + + /* I2S interface */ + i2s_alt0: i2s_alt0 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi new file mode 100644 index 000000000..9d0651d8f --- /dev/null +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -0,0 +1,78 @@ +#include "bcm283x.dtsi" + +/ { + compatible = "brcm,bcm2836"; + + soc { + ranges = <0x7e000000 0x3f000000 0x1000000>, + <0x40000000 0x40000000 0x00001000>; + dma-ranges = <0xc0000000 0x00000000 0x3f000000>; + + local_intc: local_intc { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x40000000 0x100>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&local_intc>; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupt-parent = <&local_intc>; + interrupts = <9>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&local_intc>; + interrupts = <0>, // PHYS_SECURE_PPI + <1>, // PHYS_NONSECURE_PPI + <3>, // VIRT_PPI + <2>; // HYP_PPI + always-on; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + + v7_cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + clock-frequency = <800000000>; + }; + + v7_cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + clock-frequency = <800000000>; + }; + + v7_cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + clock-frequency = <800000000>; + }; + + v7_cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf03>; + clock-frequency = <800000000>; + }; + }; +}; + +/* Make the BCM2835-style global interrupt controller be a child of the + * CPU-local interrupt controller. + */ +&intc { + compatible = "brcm,bcm2836-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-parent = <&local_intc>; + interrupts = <8>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi new file mode 100644 index 000000000..971e741e5 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -0,0 +1,212 @@ +#include <dt-bindings/pinctrl/bcm2835.h> +#include <dt-bindings/clock/bcm2835.h> +#include "skeleton.dtsi" + +/* This include file covers the common peripherals and configuration between + * bcm2835 and bcm2836 implementations, leaving the CPU configuration to + * bcm2835.dtsi and bcm2836.dtsi. + */ + +/ { + compatible = "brcm,bcm2835"; + model = "BCM2835"; + interrupt-parent = <&intc>; + + chosen { + bootargs = "earlyprintk console=ttyAMA0"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + timer@7e003000 { + compatible = "brcm,bcm2835-system-timer"; + reg = <0x7e003000 0x1000>; + interrupts = <1 0>, <1 1>, <1 2>, <1 3>; + /* This could be a reference to BCM2835_CLOCK_TIMER, + * but we don't have the driver using the common clock + * support yet. + */ + clock-frequency = <1000000>; + }; + + dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16>, + <1 17>, + <1 18>, + <1 19>, + <1 20>, + <1 21>, + <1 22>, + <1 23>, + <1 24>, + <1 25>, + <1 26>, + <1 27>, + <1 28>; + + #dma-cells = <1>; + brcm,dma-channel-mask = <0x7f35>; + }; + + intc: interrupt-controller@7e00b200 { + compatible = "brcm,bcm2835-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + watchdog@7e100000 { + compatible = "brcm,bcm2835-pm-wdt"; + reg = <0x7e100000 0x28>; + }; + + clocks: cprman@7e101000 { + compatible = "brcm,bcm2835-cprman"; + #clock-cells = <1>; + reg = <0x7e101000 0x2000>; + + /* CPRMAN derives everything from the platform's + * oscillator. + */ + clocks = <&clk_osc>; + }; + + rng@7e104000 { + compatible = "brcm,bcm2835-rng"; + reg = <0x7e104000 0x10>; + }; + + mailbox: mailbox@7e00b800 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7e00b880 0x40>; + interrupts = <0 1>; + #mbox-cells = <0>; + }; + + gpio: gpio@7e200000 { + compatible = "brcm,bcm2835-gpio"; + reg = <0x7e200000 0xb4>; + /* + * The GPIO IP block is designed for 3 banks of GPIOs. + * Each bank has a GPIO interrupt for itself. + * There is an overall "any bank" interrupt. + * In order, these are GIC interrupts 17, 18, 19, 20. + * Since the BCM2835 only has 2 banks, the 2nd bank + * interrupt output appears to be mirrored onto the + * 3rd bank's interrupt signal. + * So, a bank0 interrupt shows up on 17, 20, and + * a bank1 interrupt shows up on 18, 19, 20! + */ + interrupts = <2 17>, <2 18>, <2 19>, <2 20>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0: uart@7e201000 { + compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; + reg = <0x7e201000 0x1000>; + interrupts = <2 25>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + }; + + i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; + reg = <0x7e203000 0x20>, + <0x7e101098 0x02>; + + dmas = <&dma 2>, + <&dma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi: spi@7e204000 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204000 0x1000>; + interrupts = <2 22>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@7e205000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e205000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + aux: aux@0x7e215000 { + compatible = "brcm,bcm2835-aux"; + #clock-cells = <1>; + reg = <0x7e215000 0x8>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + }; + + sdhci: sdhci@7e300000 { + compatible = "brcm,bcm2835-sdhci"; + reg = <0x7e300000 0x100>; + interrupts = <2 30>; + clocks = <&clocks BCM2835_CLOCK_EMMC>; + status = "disabled"; + }; + + i2c1: i2c@7e804000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e804000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@7e805000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e805000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb@7e980000 { + compatible = "brcm,bcm2835-usb"; + reg = <0x7e980000 0x10000>; + interrupts = <1 9>; + }; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + /* The oscillator is the root of the clock tree. */ + clk_osc: clock@3 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-output-names = "osc"; + clock-frequency = <19200000>; + }; + + }; +}; diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi index 31141e83f..eed4dd159 100644 --- a/arch/arm/boot/dts/bcm4708.dtsi +++ b/arch/arm/boot/dts/bcm4708.dtsi @@ -15,6 +15,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "brcm,bcm-nsp-smp"; cpu@0 { device_type = "cpu"; @@ -27,6 +28,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; + secondary-boot-reg = <0xffff0400>; reg = <0x1>; }; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 446c586cd..b52927c94 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -50,6 +50,36 @@ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-off"; }; + + wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + 5ghz-2 { + label = "bcm53xx:white:5ghz-2"; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; }; gpio-keys { diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 6f50f672e..65a1309bd 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -8,6 +8,7 @@ * Licensed under the GNU/GPL. See COPYING for details. */ +#include <dt-bindings/clock/bcm-nsp.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -27,7 +28,7 @@ compatible = "ns16550"; reg = <0x0300 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <100000000>; + clocks = <&iprocslow>; status = "disabled"; }; @@ -35,48 +36,55 @@ compatible = "ns16550"; reg = <0x0400 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <100000000>; + clocks = <&iprocslow>; status = "disabled"; }; }; mpcore { compatible = "simple-bus"; - ranges = <0x00000000 0x19020000 0x00003000>; + ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; #size-cells = <1>; - scu@0000 { + a9pll: arm_clk@00000 { + #clock-cells = <0>; + compatible = "brcm,nsp-armpll"; + clocks = <&osc>; + reg = <0x00000 0x1000>; + }; + + scu@20000 { compatible = "arm,cortex-a9-scu"; - reg = <0x0000 0x100>; + reg = <0x20000 0x100>; }; - timer@0200 { + timer@20200 { compatible = "arm,cortex-a9-global-timer"; - reg = <0x0200 0x100>; + reg = <0x20200 0x100>; interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_periph>; + clocks = <&periph_clk>; }; - local-timer@0600 { + local-timer@20600 { compatible = "arm,cortex-a9-twd-timer"; - reg = <0x0600 0x100>; + reg = <0x20600 0x100>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_periph>; + clocks = <&periph_clk>; }; - gic: interrupt-controller@1000 { + gic: interrupt-controller@21000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0x1000 0x1000>, - <0x0100 0x100>; + reg = <0x21000 0x1000>, + <0x20100 0x100>; }; - L2: cache-controller@2000 { + L2: cache-controller@22000 { compatible = "arm,pl310-cache"; - reg = <0x2000 0x1000>; + reg = <0x22000 0x1000>; cache-unified; arm,shared-override; prefetch-data = <1>; @@ -94,14 +102,37 @@ clocks { #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges; - /* As long as we do not have a real clock driver us this - * fixed clock */ - clk_periph: periph { + osc: oscillator { + #clock-cells = <0>; compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + iprocmed: iprocmed { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; + clock-div = <2>; + clock-mult = <1>; + }; + + iprocslow: iprocslow { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; + clock-div = <4>; + clock-mult = <1>; + }; + + periph_clk: periph_clk { #clock-cells = <0>; - clock-frequency = <400000000>; + compatible = "fixed-factor-clock"; + clocks = <&a9pll>; + clock-div = <2>; + clock-mult = <1>; }; }; @@ -178,6 +209,25 @@ }; }; + lcpll0: lcpll0@1800c100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; + reg = <0x1800c100 0x14>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", "sdio", + "ddr_phy"; + }; + + genpll: genpll@1800c140 { + #clock-cells = <1>; + compatible = "brcm,nsp-genpll"; + reg = <0x1800c140 0x24>; + clocks = <&osc>; + clock-output-names = "genpll", "phy", "ethernetclk", + "usbclk", "iprocfast", "sata1", + "sata2"; + }; + nand: nand@18028000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index 34cd64051..d0560e8cd 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -43,18 +43,31 @@ #address-cells = <1>; #size-cells = <0>; - arm_timer_clk: arm_timer_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <500000000>; - }; - + /* UBUS peripheral clock */ periph_clk: periph_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; clock-output-names = "periph"; }; + + /* peripheral clock for system timer */ + axi_clk: axi_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&armpll>; + clock-div = <2>; + clock-mult = <1>; + }; + + /* APB bus clock */ + apb_clk: apb_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&armpll>; + clock-div = <4>; + clock-mult = <1>; + }; }; /* ARM bus */ @@ -93,14 +106,14 @@ compatible = "arm,cortex-a9-global-timer"; reg = <0x1e200 0x20>; interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&arm_timer_clk>; + clocks = <&axi_clk>; }; local_timer: local-timer@1e600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x1e600 0x20>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&arm_timer_clk>; + clocks = <&axi_clk>; }; twd_watchdog: watchdog@1e620 { @@ -109,6 +122,13 @@ interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>; }; + armpll: armpll { + #clock-cells = <0>; + compatible = "brcm,bcm63138-armpll"; + clocks = <&periph_clk>; + reg = <0x20000 0xf00>; + }; + pmb0: reset-controller@4800c0 { compatible = "brcm,bcm63138-pmb"; reg = <0x4800c0 0x10>; diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts new file mode 100644 index 000000000..251a486f2 --- /dev/null +++ b/arch/arm/boot/dts/bcm94708.dts @@ -0,0 +1,56 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + model = "NorthStar SVK (BCM94708)"; + compatible = "brcm,bcm94708", "brcm,bcm4708"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts new file mode 100644 index 000000000..b16cac929 --- /dev/null +++ b/arch/arm/boot/dts/bcm94709.dts @@ -0,0 +1,56 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + model = "NorthStar SVK (BCM94709)"; + compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts new file mode 100644 index 000000000..05a985a20 --- /dev/null +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -0,0 +1,63 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + model = "NorthStar SVK (BCM953012K)"; + compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x00000000 0x10000000>; + }; +}; + +&uart0 { + clock-frequency = <62499840>; + status = "okay"; +}; + +&uart1 { + clock-frequency = <62499840>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 16303dbd3..e298450b4 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -55,3 +55,62 @@ &uart1 { status = "okay"; }; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@1 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@2 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@3 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index eaadac3bd..ae8100974 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -435,6 +435,29 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + wdt0: watchdog@1000 { + compatible = "snps,dw-wdt"; + reg = <0x1000 0x100>; + clocks = <&refclk>; + interrupts = <0>; + }; + + wdt1: watchdog@2000 { + compatible = "snps,dw-wdt"; + reg = <0x2000 0x100>; + clocks = <&refclk>; + interrupts = <1>; + status = "disabled"; + }; + + wdt2: watchdog@3000 { + compatible = "snps,dw-wdt"; + reg = <0x3000 0x100>; + clocks = <&refclk>; + interrupts = <2>; + status = "disabled"; + }; + sm_gpio1: gpio@5000 { compatible = "snps,dw-apb-gpio"; reg = <0x5000 0x400>; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index b16df1572..6d06b6118 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -396,6 +396,29 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + wdt0: watchdog@1000 { + compatible = "snps,dw-wdt"; + reg = <0x1000 0x100>; + clocks = <&refclk>; + interrupts = <0>; + }; + + wdt1: watchdog@2000 { + compatible = "snps,dw-wdt"; + reg = <0x2000 0x100>; + clocks = <&refclk>; + interrupts = <1>; + status = "disabled"; + }; + + wdt2: watchdog@3000 { + compatible = "snps,dw-wdt"; + reg = <0x3000 0x100>; + clocks = <&refclk>; + interrupts = <2>; + status = "disabled"; + }; + sm_gpio1: gpio@5000 { compatible = "snps,dw-apb-gpio"; reg = <0x5000 0x400>; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index da28c9704..33b28757b 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -84,17 +84,49 @@ gpio = <&portb 12 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + reg_sdio1_vmmc: regulator@3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "sdio1_vmmc"; + enable-active-high; + regulator-boot-on; + gpio = <&portb 21 GPIO_ACTIVE_HIGH>; + }; + + reg_sdio1_vqmmc: regulator@4 { + compatible = "regulator-gpio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "sdio1_vqmmc"; + regulator-type = "voltage"; + enable-active-high; + gpios = <&portb 16 GPIO_ACTIVE_HIGH>; + states = <3300000 0x1 + 1800000 0x0>; + }; + }; +}; + +&soc_pinctrl { + sd1gpio_pmux: sd1pwr-pmux { + groups = "G23", "G32"; + function = "gpio"; }; }; &sdhci1 { - broken-cd; - sdhci,wp-inverted; + vmmc-supply = <®_sdio1_vmmc>; + vqmmc-supply = <®_sdio1_vqmmc>; + cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>; + wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>; + pinctrl-names = "default"; status = "okay"; }; &sdhci2 { - broken-cd; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index fb1da9999..2c34bfb13 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -311,7 +311,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x1400 0x100>; - interrupt-parent = <&aic>; interrupts = <4>; clocks = <&chip_clk CLKID_CFG>; pinctrl-0 = <&twsi0_pmux>; @@ -324,7 +323,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x1800 0x100>; - interrupt-parent = <&aic>; interrupts = <5>; clocks = <&chip_clk CLKID_CFG>; pinctrl-0 = <&twsi1_pmux>; @@ -419,6 +417,11 @@ soc_pinctrl: pin-controller { compatible = "marvell,berlin2q-soc-pinctrl"; + sd1_pmux: sd1-pmux { + groups = "G31"; + function = "sd1"; + }; + twsi0_pmux: twsi0-pmux { groups = "G6"; function = "twsi0"; @@ -510,6 +513,29 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + wdt0: watchdog@1000 { + compatible = "snps,dw-wdt"; + reg = <0x1000 0x100>; + clocks = <&refclk>; + interrupts = <0>; + }; + + wdt1: watchdog@2000 { + compatible = "snps,dw-wdt"; + reg = <0x2000 0x100>; + clocks = <&refclk>; + interrupts = <1>; + status = "disabled"; + }; + + wdt2: watchdog@3000 { + compatible = "snps,dw-wdt"; + reg = <0x3000 0x100>; + clocks = <&refclk>; + interrupts = <2>; + status = "disabled"; + }; + sm_gpio1: gpio@5000 { compatible = "snps,dw-apb-gpio"; reg = <0x5000 0x400>; @@ -530,7 +556,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x7000 0x100>; - interrupt-parent = <&sic>; interrupts = <6>; clocks = <&refclk>; pinctrl-0 = <&twsi2_pmux>; @@ -543,7 +568,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x8000 0x100>; - interrupt-parent = <&sic>; interrupts = <7>; clocks = <&refclk>; pinctrl-0 = <&twsi3_pmux>; @@ -554,7 +578,6 @@ uart0: uart@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; - interrupt-parent = <&sic>; interrupts = <8>; clocks = <&refclk>; reg-shift = <2>; @@ -566,7 +589,6 @@ uart1: uart@a000 { compatible = "snps,dw-apb-uart"; reg = <0xa000 0x100>; - interrupt-parent = <&sic>; interrupts = <9>; clocks = <&refclk>; reg-shift = <2>; diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi new file mode 100644 index 000000000..93d7e235b --- /dev/null +++ b/arch/arm/boot/dts/compulab-sb-som.dtsi @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + model = "CompuLab SB-SOM"; + compatible = "compulab,sb-som"; + + vsb_3v3: fixedregulator-v3_3 { + compatible = "regulator-fixed"; + regulator-name = "vsb_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + enable-active-high; + }; + + lcd0: display { + compatible = "startek,startek-kd050c", "panel-dpi"; + label = "lcd"; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <43>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + hdmi_conn: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + }; +}; diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts index e750ab908..645549e14 100644 --- a/arch/arm/boot/dts/da850-enbw-cmc.dts +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -28,3 +28,11 @@ }; }; }; + +&edma0 { + ti,edma-reserved-slot-ranges = <32 50>; +}; + +&edma1 { + ti,edma-reserved-slot-ranges = <32 90>; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 4f935ad9f..ef061e9a2 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -242,3 +242,11 @@ tx-num-evt = <32>; rx-num-evt = <32>; }; + +&edma0 { + ti,edma-reserved-slot-ranges = <32 50>; +}; + +&edma1 { + ti,edma-reserved-slot-ranges = <32 90>; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 0bd98cd00..226cda76e 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -151,10 +151,44 @@ }; edma0: edma@01c00000 { - compatible = "ti,edma3"; - reg = <0x0 0x10000>; - interrupts = <11 13 12>; - #dma-cells = <1>; + compatible = "ti,edma3-tpcc"; + /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */ + reg = <0x0 0x8000>; + reg-names = "edma3_cc"; + interrupts = <11 12>; + interrupt-names = "edma3_ccint", "edma3_ccerrint"; + #dma-cells = <2>; + + ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; + }; + edma0_tptc0: tptc@01c08000 { + compatible = "ti,edma3-tptc"; + reg = <0x8000 0x400>; + interrupts = <13>; + interrupt-names = "edm3_tcerrint"; + }; + edma0_tptc1: tptc@01c08400 { + compatible = "ti,edma3-tptc"; + reg = <0x8400 0x400>; + interrupts = <32>; + interrupt-names = "edm3_tcerrint"; + }; + edma1: edma@01e30000 { + compatible = "ti,edma3-tpcc"; + /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */ + reg = <0x230000 0x8000>; + reg-names = "edma3_cc"; + interrupts = <93 94>; + interrupt-names = "edma3_ccint", "edma3_ccerrint"; + #dma-cells = <2>; + + ti,tptcs = <&edma1_tptc0 7>; + }; + edma1_tptc0: tptc@01e38000 { + compatible = "ti,edma3-tptc"; + reg = <0x238000 0x400>; + interrupts = <95>; + interrupt-names = "edm3_tcerrint"; }; serial0: serial@1c42000 { compatible = "ns16550a"; @@ -201,6 +235,16 @@ compatible = "ti,da830-mmc"; reg = <0x40000 0x1000>; interrupts = <16>; + dmas = <&edma0 16 0>, <&edma0 17 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + mmc1: mmc@1e1b000 { + compatible = "ti,da830-mmc"; + reg = <0x21b000 0x1000>; + interrupts = <72>; + dmas = <&edma1 28 0>, <&edma1 29 0>; + dma-names = "rx", "tx"; status = "disabled"; }; ehrpwm0: ehrpwm@01f00000 { @@ -241,6 +285,8 @@ num-cs = <4>; ti,davinci-spi-intr-line = <1>; interrupts = <56>; + dmas = <&edma0 18 0>, <&edma0 19 0>; + dma-names = "rx", "tx"; status = "disabled"; }; mdio: mdio@1e24000 { @@ -285,8 +331,8 @@ interrupts = <54>; interrupt-names = "common"; status = "disabled"; - dmas = <&edma0 1>, - <&edma0 0>; + dmas = <&edma0 1 1>, + <&edma0 0 1>; dma-names = "tx", "rx"; }; }; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index 109fd4711..e070862b1 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -15,6 +15,14 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; + + /* MIC94060YC6 controlled by SD1_POW pin */ + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &cpsw_emac0 { @@ -26,3 +34,50 @@ phy_id = <&davinci_mdio>, <1>; phy-mode = "rgmii"; }; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; +}; + +&pincntl { + sd1_pins: pinmux_sd1_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */ + DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */ + DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */ + DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */ + DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */ + DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */ + DM814X_IOPAD(0x0924, PIN_OUTPUT | 0x40) /* SD1_POW */ + DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP | 0x80) /* GP1[6] */ + >; + }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */ + >; + }; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + dr_mode = "host"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 79838dd8d..5d4313fd5 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -15,6 +15,24 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; + + /* gpio9 seems to control USB VBUS regulator and/or hub power */ + usb_power: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "usb_power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &cpsw_emac0 { @@ -26,3 +44,55 @@ phy_id = <&davinci_mdio>, <1>; phy-mode = "rgmii"; }; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&sd2_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */ + &edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */ + dma-names = "tx", "rx"; +}; + +&pincntl { + sd2_pins: pinmux_sd2_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[7] */ + DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[6] */ + DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[5] */ + DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[4] */ + DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[3] */ + DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[2] */ + DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[1] */ + DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[0] */ + DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1) /* SD2_CLK */ + DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2) /* SD2_CMD */ + DM814X_IOPAD(0x0920, PIN_INPUT | 40) /* SD2_SDCD */ + >; + }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */ + >; + }; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + dr_mode = "host"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index ef1e8e7a6..260015856 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -4,25 +4,74 @@ * published by the Free Software Foundation. */ +&pllss_clocks { + timer1_fck: timer1_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck + &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>; + ti,bit-shift = <3>; + reg = <0x2e0>; + }; + + timer2_fck: timer2_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck + &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>; + ti,bit-shift = <6>; + reg = <0x2e0>; + }; + + sysclk18_ck: sysclk18_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&rtcosc_ck>, <&rtcdivider_ck>; + ti,bit-shift = <0>; + reg = <0x02f0>; + }; +}; + &scm_clocks { + devosc_ck: devosc_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_20000000_ck>, <&virt_19200000_ck>; + ti,bit-shift = <21>; + reg = <0x0040>; + }; - tclkin_ck: tclkin_ck { + /* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */ + auxosc_ck: auxosc_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + }; + + /* Optional 32768Hz crystal or clock on RTCOSC pins */ + rtcosc_ck: rtcosc_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; - devosc_ck: devosc_ck { + /* Optional external clock on TCLKIN pin, set rate in baord dts file */ + tclkin_ck: tclkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + virt_20000000_ck: virt_20000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <20000000>; }; - /* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */ - auxosc_ck: auxosc_ck { + virt_19200000_ck: virt_19200000_ck { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <27000000>; + clock-frequency = <19200000>; }; mpu_ck: mpu_ck { @@ -49,12 +98,6 @@ clock-frequency = <48000000>; }; - sysclk18_ck: sysclk18_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - cpsw_125mhz_gclk: cpsw_125mhz_gclk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -69,7 +112,31 @@ }; -&pllss_clocks { +&prcm_clocks { + osc_src_ck: osc_src_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&devosc_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + mpu_clksrc_ck: mpu_clksrc_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&devosc_ck>, <&rtcdivider_ck>; + ti,bit-shift = <0>; + reg = <0x0040>; + }; + + /* Fixed divider clock 0.0016384 * devosc */ + rtcdivider_ck: rtcdivider_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&devosc_ck>; + clock-mult = <128>; + clock-div = <78125>; + }; aud_clkin0_ck: aud_clkin0_ck { #clock-cells = <0>; @@ -88,22 +155,4 @@ compatible = "fixed-clock"; clock-frequency = <20000000>; }; - - timer1_mux_ck: timer1_mux_ck { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck - &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>; - ti,bit-shift = <3>; - reg = <0x2e0>; - }; - - timer2_mux_ck: timer2_mux_ck { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck - &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>; - ti,bit-shift = <6>; - reg = <0x2e0>; - }; }; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 7988b42e5..a25cd51e3 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -5,7 +5,7 @@ */ #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/omap.h> +#include <dt-bindings/pinctrl/dm814x.h> #include "skeleton.dtsi" @@ -21,6 +21,10 @@ serial2 = &uart3; ethernet0 = &cpsw_emac0; ethernet1 = &cpsw_emac1; + usb0 = &usb0; + usb1 = &usb1; + phy0 = &usb0_phy; + phy1 = &usb1_phy; }; cpus { @@ -57,9 +61,118 @@ ranges; ti,hwmods = "l3_main"; + usb: usb@47400000 { + compatible = "ti,am33xx-usb"; + reg = <0x47400000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + ti,hwmods = "usb_otg_hs"; + + usb0_phy: usb-phy@47401300 { + compatible = "ti,am335x-usb-phy"; + reg = <0x47401300 0x100>; + reg-names = "phy"; + ti,ctrl_mod = <&usb_ctrl_mod>; + }; + + usb0: usb@47401000 { + compatible = "ti,musb-am33xx"; + reg = <0x47401400 0x400 + 0x47401000 0x200>; + reg-names = "mc", "control"; + + interrupts = <18>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + phys = <&usb0_phy>; + + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 4 0 &cppi41dma 5 0 + &cppi41dma 6 0 &cppi41dma 7 0 + &cppi41dma 8 0 &cppi41dma 9 0 + &cppi41dma 10 0 &cppi41dma 11 0 + &cppi41dma 12 0 &cppi41dma 13 0 + &cppi41dma 14 0 &cppi41dma 0 1 + &cppi41dma 1 1 &cppi41dma 2 1 + &cppi41dma 3 1 &cppi41dma 4 1 + &cppi41dma 5 1 &cppi41dma 6 1 + &cppi41dma 7 1 &cppi41dma 8 1 + &cppi41dma 9 1 &cppi41dma 10 1 + &cppi41dma 11 1 &cppi41dma 12 1 + &cppi41dma 13 1 &cppi41dma 14 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + usb1: usb@47401800 { + compatible = "ti,musb-am33xx"; + reg = <0x47401c00 0x400 + 0x47401800 0x200>; + reg-names = "mc", "control"; + interrupts = <19>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + phys = <&usb1_phy>; + + dmas = <&cppi41dma 15 0 &cppi41dma 16 0 + &cppi41dma 17 0 &cppi41dma 18 0 + &cppi41dma 19 0 &cppi41dma 20 0 + &cppi41dma 21 0 &cppi41dma 22 0 + &cppi41dma 23 0 &cppi41dma 24 0 + &cppi41dma 25 0 &cppi41dma 26 0 + &cppi41dma 27 0 &cppi41dma 28 0 + &cppi41dma 29 0 &cppi41dma 15 1 + &cppi41dma 16 1 &cppi41dma 17 1 + &cppi41dma 18 1 &cppi41dma 19 1 + &cppi41dma 20 1 &cppi41dma 21 1 + &cppi41dma 22 1 &cppi41dma 23 1 + &cppi41dma 24 1 &cppi41dma 25 1 + &cppi41dma 26 1 &cppi41dma 27 1 + &cppi41dma 28 1 &cppi41dma 29 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + cppi41dma: dma-controller@47402000 { + compatible = "ti,am3359-cppi41"; + reg = <0x47400000 0x1000 + 0x47402000 0x1000 + 0x47403000 0x1000 + 0x47404000 0x4000>; + reg-names = "glue", "controller", "scheduler", "queuemgr"; + interrupts = <17>; + interrupt-names = "glue"; + #dma-cells = <2>; + #dma-channels = <30>; + #dma-requests = <256>; + }; + }; + /* - * See TRM "Table 1-317. L4LS Instance Summary", just deduct - * 0x1000 from the 1-317 addresses to get the device address + * See TRM "Table 1-317. L4LS Instance Summary" for hints. + * It shows the module target agent registers though, so the + * actual device is typically 0x1000 before the target agent + * except in cases where the module is larger than 0x1000. */ l4ls: l4ls@48000000 { compatible = "ti,dm814-l4ls", "simple-bus"; @@ -124,8 +237,8 @@ interrupts = <65>; ti,spi-num-cs = <4>; ti,hwmods = "mcspi1"; - dmas = <&edma 16 &edma 17 - &edma 18 &edma 19>; + dmas = <&edma 16 0 &edma 17 0 + &edma 18 0 &edma 19 0>; dma-names = "tx0", "rx0", "tx1", "rx1"; }; @@ -143,7 +256,7 @@ reg = <0x20000 0x2000>; clock-frequency = <48000000>; interrupts = <72>; - dmas = <&edma 26 &edma 27>; + dmas = <&edma 26 0 &edma 27 0>; dma-names = "tx", "rx"; }; @@ -153,7 +266,7 @@ reg = <0x22000 0x2000>; clock-frequency = <48000000>; interrupts = <73>; - dmas = <&edma 28 &edma 29>; + dmas = <&edma 28 0 &edma 29 0>; dma-names = "tx", "rx"; }; @@ -163,7 +276,7 @@ reg = <0x24000 0x2000>; clock-frequency = <48000000>; interrupts = <74>; - dmas = <&edma 30 &edma 31>; + dmas = <&edma 30 0 &edma 31 0>; dma-names = "tx", "rx"; }; @@ -181,12 +294,34 @@ ti,hwmods = "timer3"; }; + mmc1: mmc@60000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + dmas = <&edma 24 0 + &edma 25 0>; + dma-names = "tx", "rx"; + interrupts = <64>; + interrupt-parent = <&intc>; + reg = <0x60000 0x1000>; + }; + + mmc2: mmc@1d8000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + dmas = <&edma 2 0 + &edma 3 0>; + dma-names = "tx", "rx"; + interrupts = <28>; + interrupt-parent = <&intc>; + reg = <0x1d8000 0x1000>; + }; + control: control@140000 { compatible = "ti,dm814-scm", "simple-bus"; - reg = <0x140000 0x16d000>; + reg = <0x140000 0x20000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x160000 0x16d000>; + ranges = <0 0x140000 0x20000>; scm_conf: scm_conf@0 { compatible = "syscon"; @@ -203,19 +338,52 @@ }; }; + usb_ctrl_mod: control@620 { + compatible = "ti,am335x-usb-ctrl-module"; + reg = <0x620 0x10 + 0x648 0x4>; + reg-names = "phy_ctrl", "wakeup"; + }; + + edma_xbar: dma-router@f90 { + compatible = "ti,am335x-edma-crossbar"; + reg = <0xf90 0x40>; + #dma-cells = <3>; + dma-requests = <32>; + dma-masters = <&edma>; + }; + + /* + * Note that silicon revision 2.1 and older + * require input enabled (bit 18 set) for all + * 3.3V I/Os to avoid cumulative hardware damage. + * For more info, see errata advisory 2.1.87. + * We leave bit 18 out of function-mask and rely + * on the bootloader for it. + */ pincntl: pinmux@800 { compatible = "pinctrl-single"; - reg = <0x800 0xc38>; + reg = <0x800 0x438>; #address-cells = <1>; #size-cells = <0>; pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x300ff>; + pinctrl-single,function-mask = <0x307ff>; + }; + + usb1_phy: usb-phy@1b00 { + compatible = "ti,am335x-usb-phy"; + reg = <0x1b00 0x100>; + reg-names = "phy"; + ti,ctrl_mod = <&usb_ctrl_mod>; }; }; prcm: prcm@180000 { compatible = "ti,dm814-prcm", "simple-bus"; - reg = <0x180000 0x4000>; + reg = <0x180000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x180000 0x2000>; prcm_clocks: clocks { #address-cells = <1>; @@ -226,9 +394,13 @@ }; }; + /* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */ pllss: pllss@1c5000 { compatible = "ti,dm814-pllss", "simple-bus"; - reg = <0x1c5000 0x2000>; + reg = <0x1c5000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1c5000 0x1000>; pllss_clocks: clocks { #address-cells = <1>; @@ -254,13 +426,62 @@ reg = <0x48200000 0x1000>; }; + /* Board must configure evtmux with edma_xbar for EDMA */ + mmc3: mmc@47810000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + interrupts = <29>; + interrupt-parent = <&intc>; + reg = <0x47810000 0x1000>; + }; + edma: edma@49000000 { - compatible = "ti,edma3"; - ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; - reg = <0x49000000 0x10000>, - <0x44e10f90 0x40>; + compatible = "ti,edma3-tpcc"; + ti,hwmods = "tpcc"; + reg = <0x49000000 0x10000>; + reg-names = "edma3_cc"; interrupts = <12 13 14>; - #dma-cells = <1>; + interrupt-names = "edma3_ccint", "emda3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 3>, <&edma_tptc3 0>; + + ti,edma-memcpy-channels = <20 21>; + }; + + edma_tptc0: tptc@49800000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc0"; + reg = <0x49800000 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; + + edma_tptc1: tptc@49900000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc1"; + reg = <0x49900000 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; + + edma_tptc2: tptc@49a00000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc2"; + reg = <0x49a00000 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; + }; + + edma_tptc3: tptc@49b00000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc3"; + reg = <0x49b00000 0x100000>; + interrupts = <115>; + interrupt-names = "edma3_tcerrint"; }; /* See TRM "Table 1-318. L4HS Instance Summary" */ diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index eee636de4..c3b8811a3 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -64,7 +64,6 @@ #address-cells = <1>; #size-cells = <1>; ranges; - ti,hwmods = "l3_main"; prcm: prcm@48180000 { compatible = "ti,dm816-prcm"; @@ -180,6 +179,8 @@ #address-cells = <2>; #size-cells = <1>; interrupts = <100>; + dmas = <&edma 52>; + dma-names = "rxtx"; gpmc,num-cs = <6>; gpmc,num-waitpins = <2>; }; @@ -227,6 +228,13 @@ }; }; + spinbox: spinbox@480ca000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x480ca000 0x2000>; + ti,hwmods = "spinbox"; + #hwlock-cells = <1>; + }; + mdio: mdio@4a100800 { compatible = "ti,davinci_mdio"; #address-cells = <1>; @@ -323,6 +331,7 @@ reg = <0x48044000 0x2000>; interrupts = <92>; ti,hwmods = "timer4"; + ti,timer-pwm; }; timer5: timer@48046000 { @@ -330,6 +339,7 @@ reg = <0x48046000 0x2000>; interrupts = <93>; ti,hwmods = "timer5"; + ti,timer-pwm; }; timer6: timer@48048000 { @@ -337,6 +347,7 @@ reg = <0x48048000 0x2000>; interrupts = <94>; ti,hwmods = "timer6"; + ti,timer-pwm; }; timer7: timer@4804a000 { @@ -344,6 +355,7 @@ reg = <0x4804a000 0x2000>; interrupts = <95>; ti,hwmods = "timer7"; + ti,timer-pwm; }; uart1: uart@48020000 { diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index e6fa251e1..af3cb6331 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -62,6 +62,10 @@ pinctrl-0 = <&pmx_gpio_19>; pinctrl-names = "default"; }; + + gpu-subsystem { + status = "okay"; + }; }; &uart0 { status = "okay"; }; @@ -74,6 +78,10 @@ reg = <1>; }; +&gpu { + status = "okay"; +}; + &i2c0 { status = "okay"; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index cd58c2e62..698d58cea 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -33,6 +33,12 @@ marvell,tauros2-cache-features = <0>; }; + gpu-subsystem { + compatible = "marvell,dove-gpu-subsystem"; + cores = <&gpu>; + status = "disabled"; + }; + i2c-mux { compatible = "i2c-mux-pinctrl"; #address-cells = <1>; @@ -460,6 +466,12 @@ #clock-cells = <1>; }; + divider_clk: core-clock@0064 { + compatible = "marvell,dove-divider-clock"; + reg = <0x0064 0x8>; + #clock-cells = <1>; + }; + pinctrl: pin-ctrl@0200 { compatible = "marvell,dove-pinctrl"; reg = <0x0200 0x14>, @@ -776,6 +788,16 @@ #address-cells = <1>; #size-cells = <1>; }; + + gpu: gpu@840000 { + clocks = <÷r_clk 1>; + clock-names = "core"; + compatible = "vivante,gc"; + interrupts = <48>; + power-domains = <&gpu_domain>; + reg = <0x840000 0x4000>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi new file mode 100644 index 000000000..6f98dc8df --- /dev/null +++ b/arch/arm/boot/dts/dra62x-clocks.dtsi @@ -0,0 +1,23 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "dm814x-clocks.dtsi" + +/* + * Compared to dm814x, dra62x has different shifts and more mux options. + * Please add the extra options for ysclk_14 and 16 if really needed. + */ +&timer1_fck { + clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck + &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>; + ti,bit-shift = <4>; +}; + +&timer2_fck { + clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck + &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>; + ti,bit-shift = <8>; +}; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts new file mode 100644 index 000000000..790080690 --- /dev/null +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -0,0 +1,80 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra62x.dtsi" + +/ { + model = "DRA62x J5 Eco EVM"; + compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + /* MIC94060YC6 controlled by SD1_POW pin */ + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; +}; + +&pincntl { + sd1_pins: pinmux_sd1_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */ + DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */ + DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */ + DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */ + DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */ + DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */ + DM814X_IOPAD(0x0924, PIN_OUTPUT | 0x40) /* SD1_POW */ + DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP | 0x80) /* GP1[6] */ + >; + }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ + >; + }; +}; + +/* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */ +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + dr_mode = "otg"; +}; + +&usb1_phy { + status = "disabled"; +}; + +&usb1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi new file mode 100644 index 000000000..d3cbb4ea3 --- /dev/null +++ b/arch/arm/boot/dts/dra62x.dtsi @@ -0,0 +1,23 @@ +/* + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "dm814x.dtsi" + +/ { + compatible = "ti,dra62x"; +}; + +/* Compared to dm814x, dra62x has different offsets for Ethernet */ +&mac { + reg = <0x4a100000 0x800 + 0x4a101200 0x100>; +}; + +&davinci_mdio { + reg = <0x4a101000 0x100>; +}; + +#include "dra62x-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 864f60020..cfc24e522 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -154,100 +154,100 @@ vtt_pin: pinmux_vtt_pin { pinctrl-single,pins = < - 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ + DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ - 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ + DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ - 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ - 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ + DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ + DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ >; }; mcspi1_pins: pinmux_mcspi1_pins { pinctrl-single,pins = < - 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */ - 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */ - 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */ - 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ - 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ - 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ + DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */ + DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */ + DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */ + DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ + DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ + DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ >; }; mcspi2_pins: pinmux_mcspi2_pins { pinctrl-single,pins = < - 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */ - 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ + DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */ + DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ + DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ + DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ - 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ - 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ - 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ + DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ + DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */ - 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */ - 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ - 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ - 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ + DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ + DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; qspi1_pins: pinmux_qspi1_pins { pinctrl-single,pins = < - 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */ - 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */ - 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ - 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ - 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ - 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ - 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ - 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ - 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ - 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ + DRA7XX_CORE_IOPAD(0x344c, PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */ + DRA7XX_CORE_IOPAD(0x3450, PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */ + DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ + DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ + DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ + DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ + DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ + DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ + DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ + DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ >; }; usb1_pins: pinmux_usb1_pins { pinctrl-single,pins = < - 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ >; }; usb2_pins: pinmux_usb2_pins { pinctrl-single,pins = < - 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ + DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ >; }; @@ -257,60 +257,60 @@ * SW5.9 (GPMC_WPN) = LOW * SW5.1 (NAND_BOOTn) = HIGH */ pinctrl-single,pins = < - 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ - 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ - 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ - 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ - 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ - 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ - 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ - 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ - 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ - 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ - 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ - 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ - 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ - 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ - 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ - 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ - 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ - 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ - 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ - 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ - 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ - 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ + DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ + DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ + DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ + DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ + DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ + DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ + DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ + DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ + DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ + DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ + DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ + DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ + DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ + DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ + DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ + DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ + DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ + DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ + DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ + DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ + DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ + DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */ - 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */ - 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */ - 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */ - 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */ - 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */ - 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */ - 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */ - 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */ - 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */ - 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */ - 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */ + DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */ + DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */ + DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */ + DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */ + DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */ + DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */ + DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */ + DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */ + DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */ + DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */ + DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */ + DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */ /* Slave 2 */ - 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ - 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ - 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ - 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ - 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ - 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ - 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ - 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ - 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ - 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ - 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ + DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ + DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ + DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ + DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ + DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ + DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ + DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ + DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ + DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ + DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ >; }; @@ -318,85 +318,85 @@ cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 */ - 0x250 (MUX_MODE15) - 0x254 (MUX_MODE15) - 0x258 (MUX_MODE15) - 0x25c (MUX_MODE15) - 0x260 (MUX_MODE15) - 0x264 (MUX_MODE15) - 0x268 (MUX_MODE15) - 0x26c (MUX_MODE15) - 0x270 (MUX_MODE15) - 0x274 (MUX_MODE15) - 0x278 (MUX_MODE15) - 0x27c (MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15) /* Slave 2 */ - 0x198 (MUX_MODE15) - 0x19c (MUX_MODE15) - 0x1a0 (MUX_MODE15) - 0x1a4 (MUX_MODE15) - 0x1a8 (MUX_MODE15) - 0x1ac (MUX_MODE15) - 0x1b0 (MUX_MODE15) - 0x1b4 (MUX_MODE15) - 0x1b8 (MUX_MODE15) - 0x1bc (MUX_MODE15) - 0x1c0 (MUX_MODE15) - 0x1c4 (MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < - 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ - 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ + DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < - 0x23c (MUX_MODE15) - 0x240 (MUX_MODE15) + DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15) >; }; dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ - 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ + DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ - 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ + DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; atl_pins: pinmux_atl_pins { pinctrl-single,pins = < - 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ - 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ + DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ + DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ >; }; mcasp3_pins: pinmux_mcasp3_pins { pinctrl-single,pins = < - 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ - 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ - 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ - 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ + DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ + DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ >; }; mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { pinctrl-single,pins = < - 0x324 (MUX_MODE15) - 0x328 (MUX_MODE15) - 0x32c (MUX_MODE15) - 0x330 (MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15) >; }; }; @@ -504,6 +504,7 @@ regulator-max-microvolt = <1050000>; regulator-always-on; regulator-boot-on; + regulator-allow-bypass; }; ldoln_reg: ldoln { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index fe99231cb..f82aa44c3 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -41,6 +41,7 @@ ethernet1 = &cpsw_emac1; d_can0 = &dcan1; d_can1 = &dcan2; + spi0 = &qspi; }; timer { @@ -1153,8 +1154,10 @@ qspi: qspi@4b300000 { compatible = "ti,dra7xxx-qspi"; - reg = <0x4b300000 0x100>; - reg-names = "qspi_base"; + reg = <0x4b300000 0x100>, + <0x5c000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + syscon-chipselects = <&scm_conf 0x558>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "qspi"; @@ -1497,6 +1500,16 @@ 0x48485200 0x2E00>; #address-cells = <1>; #size-cells = <1>; + + /* + * Do not allow gating of cpsw clock as workaround + * for errata i877. Keeping internal clock disabled + * causes the device switching characteristics + * to degrade over time and eventually fail to meet + * the data manual delay time/skew specs. + */ + ti,no-idle; + /* * rx_thresh_pend * rx_pend diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index d6104d5f0..00b12002c 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -142,158 +142,158 @@ &dra7_pmx_core { i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ - 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ >; }; i2c5_pins: pinmux_i2c5_pins { pinctrl-single,pins = < - 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ - 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ >; }; i2c5_pins: pinmux_i2c5_pins { pinctrl-single,pins = < - 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ - 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ >; }; nand_default: nand_default { pinctrl-single,pins = < - 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ - 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ - 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ - 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ - 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ - 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ - 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ - 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ - 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ - 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ - 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ - 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ - 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ - 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ - 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ - 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ - 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */ - 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ - 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ - 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ - 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */ - 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ + DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ + DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ + DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ + DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ + DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ + DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ + DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ + DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ + DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ + DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ + DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ + DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ + DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ + DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ + DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ + DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ + DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */ + DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ + DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ + DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ + DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */ + DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ >; }; usb1_pins: pinmux_usb1_pins { pinctrl-single,pins = < - 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ >; }; usb2_pins: pinmux_usb2_pins { pinctrl-single,pins = < - 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ + DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ >; }; tps65917_pins_default: tps65917_pins_default { pinctrl-single,pins = < - 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ + DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ >; }; mmc1_pins_default: mmc1_pins_default { pinctrl-single,pins = < - 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ >; }; mmc2_pins_default: mmc2_pins_default { pinctrl-single,pins = < - 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ >; }; dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ - 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ + DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ - 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ + DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; qspi1_pins: pinmux_qspi1_pins { pinctrl-single,pins = < - 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ - 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ - 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ - 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ - 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ - 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ - 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ + DRA7XX_CORE_IOPAD(0x3474, PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ + DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ + DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ + DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ + DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ + DRA7XX_CORE_IOPAD(0x3488, PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ + DRA7XX_CORE_IOPAD(0x34b8, PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ >; }; hdmi_pins: pinmux_hdmi_pins { pinctrl-single,pins = < - 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ - 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ + DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ + DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ >; }; tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < - 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ + DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ >; }; atl_pins: pinmux_atl_pins { pinctrl-single,pins = < - 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ - 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ + DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ + DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ >; }; mcasp3_pins: pinmux_mcasp3_pins { pinctrl-single,pins = < - 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ - 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ - 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ - 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ + DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ + DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ >; }; mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { pinctrl-single,pins = < - 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15) - 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15) - 0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15) - 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15) >; }; }; @@ -373,6 +373,7 @@ regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; + regulator-allow-bypass; }; ldo2_reg: ldo2 { @@ -380,6 +381,7 @@ regulator-name = "ldo2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + regulator-allow-bypass; }; ldo3_reg: ldo3 { @@ -478,6 +480,8 @@ &uart1 { status = "okay"; + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3e0>; }; &elm { @@ -627,18 +631,18 @@ cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 2 */ - 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ - 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ - 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ - 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ - 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ - 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ - 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ - 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ - 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ - 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ - 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ + DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ + DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ + DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ + DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ + DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ + DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ + DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ + DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ + DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ + DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ >; }; @@ -646,33 +650,33 @@ cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 2 */ - 0x198 (MUX_MODE15) - 0x19c (MUX_MODE15) - 0x1a0 (MUX_MODE15) - 0x1a4 (MUX_MODE15) - 0x1a8 (MUX_MODE15) - 0x1ac (MUX_MODE15) - 0x1b0 (MUX_MODE15) - 0x1b4 (MUX_MODE15) - 0x1b8 (MUX_MODE15) - 0x1bc (MUX_MODE15) - 0x1c0 (MUX_MODE15) - 0x1c4 (MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ - 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ + DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < - 0x23c (MUX_MODE15) - 0x240 (MUX_MODE15) + DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15) >; }; }; diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts index a4ba31b23..a4a281fe8 100644 --- a/arch/arm/boot/dts/ea3250.dts +++ b/arch/arm/boot/dts/ea3250.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "lpc32xx.dtsi" +#include "lpc32xx.dtsi" / { model = "Embedded Artists LPC3250 board based on NXP LPC3250"; @@ -22,7 +22,7 @@ memory { device_type = "memory"; - reg = <0 0x4000000>; + reg = <0x80000000 0x4000000>; }; ahb { @@ -31,19 +31,6 @@ use-iram; }; - /* Here, choose exactly one from: ohci, usbd */ - ohci@31020000 { - transceiver = <&isp1301>; - status = "okay"; - }; - -/* - usbd@31020000 { - transceiver = <&isp1301>; - status = "okay"; - }; -*/ - /* 128MB Flash via SLC NAND controller */ slc: flash@20020000 { status = "okay"; @@ -130,15 +117,6 @@ clock-frequency = <100000>; }; - i2cusb: i2c@31020300 { - clock-frequency = <100000>; - - isp1301: usb-transceiver@2d { - compatible = "nxp,isp1301"; - reg = <0x2d>; - }; - }; - sd@20098000 { wp-gpios = <&pca9532 5 0>; cd-gpios = <&pca9532 4 0>; @@ -279,3 +257,18 @@ }; }; }; + +/* Here, choose exactly one from: ohci, usbd */ +&ohci /* &usbd */ { + transceiver = <&isp1301>; + status = "okay"; +}; + +&i2cusb { + clock-frequency = <100000>; + + isp1301: usb-transceiver@2d { + compatible = "nxp,isp1301"; + reg = <0x2d>; + }; +}; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index edad0c4ee..57795da61 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -44,7 +44,7 @@ }; gic: interrupt-controller@e0020000 { - compatible = "arm,cortex-a9-gic"; + compatible = "arm,pl390"; interrupt-controller; #interrupt-cells = <3>; reg = <0xe0028000 0x1000>, diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 2f30d632f..18e3deffb 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -152,6 +152,20 @@ interrupt-parent = <&gic>; }; + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* Reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; + }; + mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 3184e10f2..045785c44 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -158,6 +158,20 @@ interrupt-parent = <&gic>; }; + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; + }; + dsi_0: dsi@11C80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; @@ -713,6 +727,15 @@ iommus = <&sysmmu_jpeg>; }; + rotator: rotator@12810000 { + compatible = "samsung,exynos4210-rotator"; + reg = <0x12810000 0x64>; + interrupts = <0 83 0>; + clocks = <&clock CLK_ROTATOR>; + clock-names = "rotator"; + iommus = <&sysmmu_rotator>; + }; + hdmi: hdmi@12D00000 { compatible = "samsung,exynos4210-hdmi"; reg = <0x12D00000 0x70000>; @@ -940,7 +963,6 @@ interrupts = <5 0>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; - power-domains = <&pd_lcd0>; #iommu-cells = <0>; }; @@ -954,4 +976,12 @@ power-domains = <&pd_lcd0>; #iommu-cells = <0>; }; + + prng: rng@10830400 { + compatible = "samsung,exynos4-rng"; + reg = <0x10830400 0x200>; + clocks = <&clock CLK_SSS>; + clock-names = "secss"; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index b8f866991..5821ad87e 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -138,10 +138,6 @@ status = "okay"; }; -&g2d { - status = "okay"; -}; - &i2c_0 { status = "okay"; samsung,i2c-sda-delay = <100>; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index bc1448ba9..104cbb33d 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -44,10 +44,6 @@ }; }; -&g2d { - status = "okay"; -}; - &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 81b7ec7b3..4f5d37920 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -560,16 +560,24 @@ &serial_0 { status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; }; &serial_1 { status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; }; &serial_2 { status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; }; &serial_3 { status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 3e5ba665d..c1cb8df6d 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -185,8 +185,8 @@ interrupts = <0 89 0>; clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; clock-names = "sclk_fimg2d", "fimg2d"; + power-domains = <&pd_lcd0>; iommus = <&sysmmu_g2d>; - status = "disabled"; }; camera { @@ -271,6 +271,10 @@ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; }; +&mdma1 { + power-domains = <&pd_lcd0>; +}; + &pmu_system_controller { clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; @@ -279,3 +283,11 @@ <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; #clock-cells = <1>; }; + +&rotator { + power-domains = <&pd_lcd0>; +}; + +&sysmmu_rotator { + power-domains = <&pd_lcd0>; +}; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index edf0fc8db..395c3ca96 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -177,10 +177,6 @@ assigned-clock-rates = <0>, <176000000>; }; -&g2d { - status = "okay"; -}; - &hdmi { hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 646ff0bd0..dd89f7b37 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -13,7 +13,6 @@ /dts-v1/; #include "exynos4412-odroid-common.dtsi" -#include <dt-bindings/gpio/gpio.h> / { model = "Hardkernel ODROID-U3 board based on Exynos4412"; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index c8d86af2f..9e2e24c61 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -89,10 +89,6 @@ status = "okay"; }; -&g2d { - status = "okay"; -}; - &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index c2421df1f..a130ab39f 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -41,10 +41,6 @@ }; }; -&g2d { - status = "okay"; -}; - &keypad { samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <8>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 40a474c43..a6f78c3da 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -1234,6 +1234,10 @@ status = "okay"; }; +&prng { + status = "okay"; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 294cfe403..40beede46 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -64,73 +64,73 @@ compatible = "operating-points-v2"; opp-shared; - opp00 { + opp@200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <200000>; }; - opp01 { + opp@300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <200000>; }; - opp02 { + opp@400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <925000>; clock-latency-ns = <200000>; }; - opp03 { + opp@500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <950000>; clock-latency-ns = <200000>; }; - opp04 { + opp@600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <975000>; clock-latency-ns = <200000>; }; - opp05 { + opp@700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <987500>; clock-latency-ns = <200000>; }; - opp06 { + opp@800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1000000>; clock-latency-ns = <200000>; opp-suspend; }; - opp07 { + opp@900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1037500>; clock-latency-ns = <200000>; }; - opp08 { + opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1087500>; clock-latency-ns = <200000>; }; - opp09 { + opp@1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1137500>; clock-latency-ns = <200000>; }; - opp10 { + opp@1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1187500>; clock-latency-ns = <200000>; }; - opp11 { + opp@1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1250000>; clock-latency-ns = <200000>; }; - opp12 { + opp@1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1287500>; clock-latency-ns = <200000>; }; - opp13 { + opp@1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index b77dac61f..84a23f962 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -116,7 +116,6 @@ clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; clock-names = "sclk_fimg2d", "fimg2d"; iommus = <&sysmmu_g2d>; - status = "disabled"; }; camera { @@ -339,6 +338,10 @@ compatible = "samsung,exynos4212-jpeg"; }; +&rotator { + compatible = "samsung,exynos4212-rotator"; +}; + &mixer { compatible = "samsung,exynos4212-mixer"; clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 110dbd4fb..e2439e87e 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -88,6 +88,20 @@ status = "disabled"; }; + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; + }; + fimd: fimd@14400000 { compatible = "samsung,exynos5250-fimd"; interrupt-parent = <&combiner>; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 0a7f40882..5cb33ba5e 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -520,8 +520,7 @@ &mmc_0 { status = "okay"; num-slots = <1>; - broken-cd; - card-detect-delay = <200>; + non-removable; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; @@ -552,10 +551,9 @@ &mmc_3 { status = "okay"; num-slots = <1>; - broken-cd; + non-removable; cap-sdio-irq; keep-power-in-suspend; - card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 88b9cf5f2..33e2d5f73 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -269,6 +269,15 @@ iommu-names = "left", "right"; }; + rotator: rotator@11C00000 { + compatible = "samsung,exynos5250-rotator"; + reg = <0x11C00000 0x64>; + interrupts = <0 84 0>; + clocks = <&clock CLK_ROTATOR>; + clock-names = "rotator"; + iommus = <&sysmmu_rotator>; + }; + tmu: tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 731eefd23..fad0779b1 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -102,6 +102,20 @@ reg = <0x10040000 0x5000>; }; + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; + }; + mct: mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0xB00>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 72ba6f032..35cfb07dc 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -690,11 +690,9 @@ &mmc_0 { status = "okay"; num-slots = <1>; - broken-cd; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; - card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; @@ -709,10 +707,9 @@ &mmc_1 { status = "okay"; num-slots = <1>; - broken-cd; + non-removable; cap-sdio-irq; keep-power-in-suspend; - card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 1b3d6c769..48a0a5531 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -717,6 +717,15 @@ iommus = <&sysmmu_tv>; }; + rotator: rotator@11C00000 { + compatible = "samsung,exynos5250-rotator"; + reg = <0x11C00000 0x64>; + interrupts = <0 84 0>; + clocks = <&clock CLK_ROTATOR>; + clock-names = "rotator"; + iommus = <&sysmmu_rotator>; + }; + gsc_0: video-scaler@13e00000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; @@ -1059,6 +1068,16 @@ #iommu-cells = <0>; }; + sysmmu_rotator: sysmmu@0x11D40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11D40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; + #iommu-cells = <0>; + }; + sysmmu_jpeg0: sysmmu@0x11F10000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11F10000 0x1000>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 1af5bdc2b..913421744 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -67,11 +67,6 @@ <19200000>; }; -&fimd { - status = "okay"; -}; - - &hdmi { status = "okay"; hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index b1b36081f..2ae1cf41d 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -67,5 +67,5 @@ }; &usbdrd_dwc3_1 { - dr_mode = "otg"; + dr_mode = "peripheral"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index 0c0bbdbfd..432406db8 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -98,5 +98,5 @@ }; &usbdrd_dwc3_1 { - dr_mode = "otg"; + dr_mode = "peripheral"; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 49a4f43e5..064176f20 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -122,6 +122,12 @@ compatible = "auo,b133htn01"; power-supply = <&tps65090_fet6>; backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; }; mmc1_pwrseq: mmc1_pwrseq { @@ -148,7 +154,14 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; - panel = <&panel>; + + ports { + port { + dp_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; }; &fimd { @@ -652,12 +665,10 @@ &mmc_0 { status = "okay"; num-slots = <1>; - broken-cd; mmc-hs200-1_8v; mmc-hs400-1_8v; cap-mmc-highspeed; non-removable; - card-detect-delay = <200>; clock-frequency = <800000000>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; @@ -672,10 +683,9 @@ &mmc_1 { status = "okay"; num-slots = <1>; - broken-cd; + non-removable; cap-sdio-irq; keep-power-in-suspend; - card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 7c4b9f2f9..848ffa785 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -284,6 +284,7 @@ #define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x11 0x000 #define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000 #define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001 +#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x16 0x000 #define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x10 0x000 #define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x15 0x000 @@ -439,6 +440,7 @@ #define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000 #define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000 +#define MX25_PAD_KPP_ROW0__UART1_DTR 0x1a8 0x3a0 0x000 0x14 0x000 #define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x15 0x000 #define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x10 0x000 @@ -446,6 +448,7 @@ #define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x10 0x000 #define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x13 0x002 +#define MX25_PAD_KPP_ROW2__UART1_DCD 0x1b0 0x3a8 0x000 0x14 0x000 #define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000 #define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000 diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 0097c43f7..41bc0c03b 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -24,6 +24,10 @@ i2c2 = &i2c3; mmc0 = &esdhc1; mmc1 = &esdhc2; + pwm0 = &pwm1; + pwm1 = &pwm2; + pwm2 = &pwm3; + pwm3 = &pwm4; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 5df0b24ea..7a80bd686 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -115,7 +115,7 @@ pwm: pwm@80064000 { pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; + pinctrl-0 = <&pwm4_pins_a>; status = "okay"; }; @@ -170,7 +170,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm 3 5000000>; + pwms = <&pwm 4 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index c5b57d4ad..fae7b9069 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -405,6 +405,17 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + auart4_2pins_b: auart4@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_CTS__AUART4_RX + MX28_PAD_AUART0_RTS__AUART4_TX + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + mac0_pins_a: mac0@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts new file mode 100644 index 000000000..0ff76a1bc --- /dev/null +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -0,0 +1,302 @@ +/* + * Copyright 2015 Savoir-faire Linux + * + * This device tree is based on imx51-babbage.dts + * + * Licensed under the X11 license or the GPL v2 (or later) + */ + +/dts-v1/; +#include "imx51.dtsi" + +/ { + model = "Technologic Systems TS-4800"; + compatible = "technologic,imx51-ts4800", "fsl,imx51"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x90000000 0x10000000>; + }; + + clocks { + ckih1 { + clock-frequency = <22579200>; + }; + + ckih2 { + clock-frequency = <24576000>; + }; + }; + + backlight_reg: regulator-backlight { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_lcd>; + regulator-name = "enable_lcd_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 78770>; + brightness-levels = <0 150 200 255>; + default-brightness-level = <1>; + power-supply = <&backlight_reg>; + }; + + display0: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <30066000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <50>; + hback-porch = <70>; + hsync-len = <50>; + vback-porch = <0>; + vfront-porch = <0>; + vsync-len = <50>; + }; + }; + + port@0 { + display0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + rtc: m41t00@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; +}; + +&ipu_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_backlight>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + fpga@0 { + compatible = "simple-bus"; + fsl,weim-cs-timing = <0x0061008F 0x00000002 0x1c022000 + 0x00000000 0x1c092480 0x00000000>; + reg = <0 0x0000000 0x1d000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x1d000>; + + syscon: syscon@b0010000 { + compatible = "syscon", "simple-mfd"; + reg = <0x10000 0x3d>; + reg-io-width = <2>; + + wdt@e { + compatible = "technologic,ts4800-wdt"; + syscon = <&syscon 0xe>; + }; + }; + + touchscreen { + compatible = "technologic,ts4800-ts"; + reg = <0x12000 0x1000>; + syscon = <&syscon 0x10 6>; + }; + }; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ + >; + }; + + pinctrl_enable_lcd: enablelcdgrp { + fsl,pins = < + MX51_PAD_CSI2_D12__GPIO4_9 0x1c5 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0x100 + MX51_PAD_GPIO1_1__GPIO1_1 0x100 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5 + MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085 + MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085 + MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085 + MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180 + MX51_PAD_EIM_CS5__FEC_CRS 0x00000180 + MX51_PAD_DISP2_DAT10__FEC_COL 0x00000180 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x00000180 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x00002180 + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x00002004 + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004 + MX51_PAD_DI2_PIN2__FEC_MDC 0x00002004 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x00002004 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x00002004 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x00002004 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x00002004 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x00002180 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x000020a4 + MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */ + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 + MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 + MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 + MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 + MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 + MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 + MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 + MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 + MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 + MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 + MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 + MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 + MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 + MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 + MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 + MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 + MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 + MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 + MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 + MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 + MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 + MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 + MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 + MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 + MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 + MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 + MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 + MX51_PAD_DI_GP4__DI2_PIN15 0x5 + >; + }; + + pinctrl_pwm_backlight: backlightgrp { + fsl,pins = < + MX51_PAD_GPIO1_2__PWM1_PWMO 0x80000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_EIM_D25__UART3_RXD 0x1c5 + MX51_PAD_EIM_D26__UART3_TXD 0x1c5 + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX51_PAD_EIM_DTACK__EIM_DTACK 0x85 + MX51_PAD_EIM_CS0__EIM_CS0 0x0 + MX51_PAD_EIM_CS1__EIM_CS1 0x0 + MX51_PAD_EIM_EB0__EIM_EB0 0x85 + MX51_PAD_EIM_EB1__EIM_EB1 0x85 + MX51_PAD_EIM_OE__EIM_OE 0x85 + MX51_PAD_EIM_LBA__EIM_LBA 0x85 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 4b0ec0703..c13a73aa5 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -104,10 +104,15 @@ compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>; }; + + gpu-subsystem { + compatible = "fsl,imx-gpu-subsystem"; + cores = <&gpu_2d>, <&gpu_3d>; + }; }; &gpt { - compatible = "fsl,imx6dl-gpt", "fsl,imx6q-gpt"; + compatible = "fsl,imx6dl-gpt"; }; &hdmi { diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts new file mode 100644 index 000000000..5acd0c63b --- /dev/null +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -0,0 +1,785 @@ +/* + * Copyright 2015 Sutajio Ko-Usagi PTE LTD + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Kosagi Novena Dual/Quad"; + compatible = "kosagi,imx6q-novena", "fsl,imx6q"; + + chosen { + stdout-path = &uart2; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 10000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_novena>; + power-supply = <®_lvds_lcd>; + brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>; + default-brightness-level = <12>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys_novena>; + + user-button { + label = "User Button"; + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + + lid { + label = "Lid"; + gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_novena>; + + heartbeat { + label = "novena:white:panel"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + panel: panel { + compatible = "innolux,n133hse-ea1", "simple-panel"; + backlight = <&backlight>; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_audio_codec: regulator-audio-codec { + compatible = "regulator-fixed"; + regulator-name = "es8328-power"; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <400000>; + gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_display: regulator-display { + compatible = "regulator-fixed"; + regulator-name = "lcd-display-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; + gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lvds_lcd: regulator-lvds-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd-lvds-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "pcie-bus-power"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_sata: regulator-sata { + compatible = "regulator-fixed"; + regulator-name = "sata-power"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <10000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-es8328"; + model = "imx-audio-es8328"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-amp-supply = <®_audio_codec>; + jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>; + audio-routing = + "Speaker", "LOUT2", + "Speaker", "ROUT2", + "Speaker", "audio-amp", + "Headphone", "ROUT1", + "Headphone", "LOUT1", + "LINPUT1", "Mic Jack", + "RINPUT1", "Mic Jack", + "Mic Jack", "Mic Bias"; + mux-int-port = <0x1>; + mux-ext-port = <0x3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_novena>; + status = "okay"; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3_novena>; + fsl,spi-num-chipselects = <3>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_novena>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + txc-skew-ps = <3000>; + txen-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <3000>; + txd1-skew-ps = <3000>; + txd2-skew-ps = <3000>; + txd3-skew-ps = <3000>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_novena>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_novena>; + status = "okay"; + + accel: mma8452@1c { + compatible = "fsl,mma8452"; + reg = <0x1c>; + }; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + sbs_battery: bq20z75@0b { + compatible = "sbs,sbs-battery"; + reg = <0x0b>; + sbs,i2c-retry-count = <50>; + }; + + touch: stmpe811@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + #address-cells = <1>; + #size-cells = <0>; + irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe_novena>; + vio-supply = <®_3p3v>; + vcc-supply = <®_3p3v>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_novena>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + reg_sw1a: sw1a { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + reg_sw1c: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw2: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw3a: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw3b: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw4: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + reg_swbst: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + }; + + reg_snvs: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vref: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + reg_vgen1: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + reg_vgen2: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + reg_vgen3: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vgen4: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen5: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen6: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_novena>; + status = "okay"; + + codec: es8328@11 { + compatible = "everest,es8328"; + reg = <0x11>; + DVDD-supply = <®_audio_codec>; + AVDD-supply = <®_audio_codec>; + PVDD-supply = <®_audio_codec>; + HPVDD-supply = <®_audio_codec>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sound_novena>; + clocks = <&clks IMX6QDL_CLK_CKO1>; + assigned-clocks = <&clks IMX6QDL_CLK_CKO>, + <&clks IMX6QDL_CLK_CKO1_SEL>, + <&clks IMX6QDL_CLK_PLL4_AUDIO>, + <&clks IMX6QDL_CLK_CKO1>; + assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>, + <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>, + <&clks IMX6QDL_CLK_OSC>, + <&clks IMX6QDL_CLK_CKO1_PODF>; + assigned-clock-rates = <0 0 722534400 22579200>; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp_novena>; + linux,keymap = < + MATRIX_KEY(1, 1, KEY_CONFIG) + >; + status = "okay"; +}; + +&ldb { + fsl,dual-channel; + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "jeida"; + fsl,data-width = <24>; + fsl,panel = <&panel>; + status = "okay"; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_novena>; + reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sata { + target-supply = <®_sata>; + fsl,transmit-level-mV = <1025>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <8>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_novena>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_novena>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_novena>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + dr_mode = "otg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_novena>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_swbst>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_novena>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_novena>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux_novena: audmuxgrp-novena { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight_novena: backlightgrp-novena { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b1 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b1 + >; + }; + + pinctrl_ecspi3_novena: ecspi3grp-novena { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_enet_novena: enetgrp-novena { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b028 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b028 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b028 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b028 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b028 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + /* Ethernet reset */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b1 + >; + }; + + pinctrl_fpga_gpio: fpgagpiogrp-novena { + fsl,pins = < + /* FPGA power */ + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 + /* Reset */ + MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1 + /* FPGA GPIOs */ + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b1 + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b1 + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b1 + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b1 + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1 + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b1 + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b1 + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b1 + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b1 + MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b0b1 + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b1 + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b0b1 + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b1 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b1 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1 + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b1 + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b0b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b1 + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b1 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b1 + >; + }; + + pinctrl_fpga_eim: fpgaeimgrp-novena { + fsl,pins = < + /* FPGA power */ + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 + /* Reset */ + MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1 + /* FPGA GPIOs */ + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0f1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0f1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0f1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0f1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0f1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0f1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0f1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0f1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0f1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0f1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0f1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0f1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0f1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0f1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0f1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0f1 + MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0f1 + MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0f1 + MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0f1 + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0f1 + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0f1 + MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0f1 + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0f1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0f1 + MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb0f1 + MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0f1 + >; + }; + + pinctrl_gpio_keys_novena: gpiokeysgrp-novena { + fsl,pins = < + /* User button */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + /* PCIe Wakeup */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1f0e0 + /* Lid switch */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 + >; + }; + + pinctrl_hdmi_novena: hdmigrp-novena { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1 + >; + }; + + pinctrl_i2c1_novena: i2c1grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2_novena: i2c2grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_novena: i2c3grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp_novena: kppgrp-novena { + fsl,pins = < + /* Front panel button */ + MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1 + /* Fake column driver, not connected */ + MX6QDL_PAD_KEY_COL1__KEY_COL1 0x1b0b1 + >; + }; + + pinctrl_leds_novena: ledsgrp-novena { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b1 + >; + }; + + pinctrl_pcie_novena: pciegrp-novena { + fsl,pins = < + /* Reset */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 + /* Power On */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 + /* Wifi kill */ + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b1 + >; + }; + + pinctrl_sata_novena: satagrp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b1 + >; + }; + + pinctrl_senoko_novena: senokogrp-novena { + fsl,pins = < + /* Senoko IRQ line */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048 + /* Senoko reset line */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b1 + >; + }; + + pinctrl_sound_novena: soundgrp-novena { + fsl,pins = < + /* Audio power regulator */ + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1 + /* Headphone plug */ + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b1 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + >; + }; + + pinctrl_stmpe_novena: stmpegrp-novena { + fsl,pins = < + /* Touchscreen interrupt */ + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1 + >; + }; + + pinctrl_uart2_novena: uart2grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3_novena: uart3grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4_novena: uart4grp-novena { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg_novena: usbotggrp-novena { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2_novena: usdhc2grp-novena { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + /* Write protect */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 + /* Card detect */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1 + >; + }; + + pinctrl_usdhc3_novena: usdhc3grp-novena { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 399103b8e..0d93c0e8f 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -14,6 +14,7 @@ / { aliases { + ipu1 = &ipu2; spi4 = &ecspi5; }; @@ -103,42 +104,6 @@ iomuxc: iomuxc@020e0000 { compatible = "fsl,imx6q-iomuxc"; - - ipu2 { - pinctrl_ipu2_1: ipu2grp-1 { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10 - MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x10 - MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x10 - MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x10 - MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x80000000 - MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x10 - MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x10 - MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x10 - MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x10 - MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x10 - MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x10 - MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x10 - MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x10 - MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x10 - MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x10 - MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x10 - MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x10 - MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x10 - MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x10 - MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x10 - MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x10 - MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x10 - MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x10 - MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x10 - MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x10 - MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x10 - MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x10 - MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x10 - MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x10 - >; - }; - }; }; }; @@ -153,6 +118,16 @@ status = "disabled"; }; + gpu_vg: gpu@02204000 { + compatible = "vivante,gc"; + reg = <0x02204000 0x4000>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_GPU2D_CORE>; + clock-names = "bus", "core"; + power-domains = <&gpc 1>; + }; + ipu2: ipu@02800000 { #address-cells = <1>; #size-cells = <0>; @@ -225,6 +200,11 @@ compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>; }; + + gpu-subsystem { + compatible = "fsl,imx-gpu-subsystem"; + cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>; + }; }; &hdmi { diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index dc0cebfe2..5cd16f217 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -174,6 +174,24 @@ status = "okay"; }; +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ + status = "disabled"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -294,6 +312,24 @@ >; }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 18cd4114a..9fa8a10c7 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -151,6 +151,21 @@ status = "okay"; }; +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi3 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -275,6 +290,18 @@ status = "okay"; }; +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; @@ -338,6 +365,15 @@ >; }; + pinctrl_ecspi3: escpi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -429,6 +465,18 @@ >; }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index eea90f37b..e8375e173 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -152,6 +152,13 @@ status = "okay"; }; +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -247,7 +254,7 @@ &ldb { status = "okay"; - lvds-channel@1 { + lvds-channel@0 { fsl,data-mapping = "spwg"; fsl,data-width = <18>; status = "okay"; @@ -280,6 +287,18 @@ }; }; +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; @@ -435,6 +454,18 @@ >; }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 6c11a2ae3..66983dc5c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -142,6 +142,13 @@ status = "okay"; }; +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -260,6 +267,8 @@ swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; }; snvs_reg: vsnvs { @@ -336,7 +345,7 @@ &ldb { status = "okay"; - lvds-channel@1 { + lvds-channel@0 { fsl,data-mapping = "spwg"; fsl,data-width = <18>; status = "okay"; @@ -369,6 +378,24 @@ }; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */ + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; @@ -528,6 +555,24 @@ >; }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 741f3d529..118bea524 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -198,6 +198,18 @@ status = "okay"; }; +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + &ssi1 { status = "okay"; }; @@ -290,6 +302,18 @@ >; }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index d1e5048b0..cca39f194 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -164,6 +164,18 @@ status = "okay"; }; +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -242,6 +254,18 @@ >; }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index a70a193d2..d21999e10 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -30,6 +30,7 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + ipu0 = &ipu1; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; @@ -47,15 +48,6 @@ usbphy1 = &usbphy2; }; - intc: interrupt-controller@00a01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00a01000 0x1000>, - <0x00a00100 0x100>; - interrupt-parent = <&intc>; - }; - clocks { #address-cells = <1>; #size-cells = <0>; @@ -147,6 +139,27 @@ }; }; + gpu_3d: gpu@00130000 { + compatible = "vivante,gc"; + reg = <0x00130000 0x4000>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>, + <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>; + clock-names = "bus", "core", "shader"; + power-domains = <&gpc 1>; + }; + + gpu_2d: gpu@00134000 { + compatible = "vivante,gc"; + reg = <0x00134000 0x4000>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_GPU2D_CORE>; + clock-names = "bus", "core"; + power-domains = <&gpc 1>; + }; + timer@00a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; @@ -155,6 +168,15 @@ clocks = <&clks IMX6QDL_CLK_TWD>; }; + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + L2: l2-cache@00a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; @@ -173,8 +195,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */ - 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ + ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; @@ -227,7 +248,7 @@ "rxtx1", "rxtx2", "rxtx3", "rxtx4", "rxtx5", "rxtx6", - "rxtx7", "dma"; + "rxtx7", "spba"; status = "disabled"; }; @@ -309,7 +330,7 @@ <&clks IMX6QDL_CLK_ESAI_EXTAL>, <&clks IMX6QDL_CLK_ESAI_IPG>, <&clks IMX6QDL_CLK_SPBA>; - clock-names = "core", "mem", "extal", "fsys", "dma"; + clock-names = "core", "mem", "extal", "fsys", "spba"; dmas = <&sdma 23 21 0>, <&sdma 24 21 0>; dma-names = "rx", "tx"; status = "disabled"; @@ -378,7 +399,7 @@ "asrck_1", "asrck_2", "asrck_3", "asrck_4", "asrck_5", "asrck_6", "asrck_7", "asrck_8", "asrck_9", "asrck_a", "asrck_b", "asrck_c", - "asrck_d", "asrck_e", "asrck_f", "dma"; + "asrck_d", "asrck_e", "asrck_f", "spba"; dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", @@ -875,7 +896,6 @@ #size-cells = <1>; reg = <0x2100000 0x10000>; ranges = <0 0x2100000 0x10000>; - interrupt-parent = <&intc>; clocks = <&clks IMX6QDL_CLK_CAAM_MEM>, <&clks IMX6QDL_CLK_CAAM_ACLK>, <&clks IMX6QDL_CLK_CAAM_IPG>, @@ -906,6 +926,9 @@ clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; @@ -917,6 +940,9 @@ fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; @@ -927,6 +953,9 @@ clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; @@ -937,6 +966,9 @@ clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 3>; dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 66d57adc1..56922dc7c 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -151,7 +151,7 @@ "rxtx1", "rxtx2", "rxtx3", "rxtx4", "rxtx5", "rxtx6", - "rxtx7", "dma"; + "rxtx7", "spba"; status = "disabled"; }; @@ -708,6 +708,9 @@ clocks = <&clks IMX6SL_CLK_USBOH3>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; @@ -718,6 +721,9 @@ clocks = <&clks IMX6SL_CLK_USBOH3>; fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; @@ -728,6 +734,9 @@ clocks = <&clks IMX6SL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index b48a83860..c7030adba 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -222,7 +222,7 @@ "rxtx1", "rxtx2", "rxtx3", "rxtx4", "rxtx5", "rxtx6", - "rxtx7", "dma"; + "rxtx7", "spba"; status = "disabled"; }; @@ -295,7 +295,7 @@ <&clks IMX6SX_CLK_ESAI_IPG>, <&clks IMX6SX_CLK_SPBA>; clock-names = "core", "mem", "extal", - "fsys", "dma"; + "fsys", "spba"; status = "disabled"; }; @@ -348,7 +348,7 @@ <&clks IMX6SX_CLK_ASRC_IPG>, <&clks IMX6SX_CLK_SPDIF>, <&clks IMX6SX_CLK_SPBA>; - clock-names = "mem", "ipg", "asrck", "dma"; + clock-names = "mem", "ipg", "asrck", "spba"; dmas = <&sdma 17 20 1>, <&sdma 18 20 1>, <&sdma 19 20 1>, <&sdma 20 20 1>, <&sdma 21 20 1>, <&sdma 22 20 1>; @@ -783,6 +783,9 @@ fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>; fsl,anatop = <&anatop>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; @@ -793,6 +796,9 @@ clocks = <&clks IMX6SX_CLK_USBOH3>; fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; @@ -805,6 +811,9 @@ phy_type = "hsic"; fsl,anatop = <&anatop>; dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; @@ -1152,6 +1161,8 @@ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_IPG>; clock-names = "adc"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; status = "disabled"; }; @@ -1161,6 +1172,8 @@ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_IPG>; clock-names = "adc"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index d00e994bd..99b646506 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -548,6 +548,9 @@ fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>; fsl,anatop = <&anatop>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; @@ -558,6 +561,9 @@ clocks = <&clks IMX6UL_CLK_USBOH3>; fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; status = "disabled"; }; @@ -619,6 +625,18 @@ status = "disabled"; }; + adc1: adc@02198000 { + compatible = "fsl,imx6ul-adc", "fsl,vf610-adc"; + reg = <0x02198000 0x4000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ADC1>; + num-channels = <2>; + clock-names = "adc"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; + status = "disabled"; + }; + i2c1: i2c@021a0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts new file mode 100644 index 000000000..48634519d --- /dev/null +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -0,0 +1,286 @@ +/* + * Support for CompuLab CL-SOM-iMX7 System-on-Module + * + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ + * Author: Ilya Ledvich <ilya@compulab.co.il> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "imx7d.dtsi" + +/ { + model = "CompuLab CL-SOM-iMX7"; + compatible = "compulab,cl-som-imx7", "fsl,imx7d"; + + memory { + reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ + }; + + reg_usb_otg1_vbus: regulator-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + pca9555: pca9555@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + fsl,tuning-step = <2>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts new file mode 100644 index 000000000..d63c597c0 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts @@ -0,0 +1,42 @@ +/* + * Support for CompuLab SBC-iMX7 Single Board Computer + * + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ + * Author: Ilya Ledvich <ilya@compulab.co.il> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + */ + +#include "imx7d-cl-som-imx7.dts" + +/ { + model = "CompuLab SBC-iMX7"; + compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + enable-sdio-wakeup; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 432aaf5d5..b2c453662 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -97,6 +97,16 @@ }; }; +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&adc2 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + &cpu0 { arm-supply = <&sw1a_reg>; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index ebc053a06..25ad30978 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -85,9 +85,7 @@ 792000 975000 >; clock-latency = <61036>; /* two CLK32 periods */ - clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>, - <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>; - clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main"; + clocks = <&clks IMX7D_CLK_ARM>; }; cpu1: cpu@1 { @@ -583,6 +581,24 @@ reg = <0x30400000 0x400000>; ranges; + adc1: adc@30610000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30610000 0x10000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + status = "disabled"; + }; + + adc2: adc@30620000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30620000 0x10000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + status = "disabled"; + }; + pwm1: pwm@30660000 { compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; reg = <0x30660000 0x10000>; diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index bf4143c6c..b84af3da8 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -14,7 +14,7 @@ #include "kirkwood-synology.dtsi" / { - model = "Synology DS111"; + model = "Synology DS112"; compatible = "synology,ds111", "marvell,kirkwood"; memory { diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts index 09eed3cea..36eec7392 100644 --- a/arch/arm/boot/dts/kirkwood-lswvl.dts +++ b/arch/arm/boot/dts/kirkwood-lswvl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WVL/VL * - * Copyright (C) 2015, rogershimizu@gmail.com + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -156,21 +157,21 @@ button@1 { label = "Function Button"; linux,code = <KEY_OPTION>; - gpios = <&gpio0 45 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; @@ -185,38 +186,38 @@ led@1 { label = "lswvl:red:alarm"; - gpios = <&gpio0 36 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; led@2 { label = "lswvl:red:func"; - gpios = <&gpio0 37 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; led@3 { label = "lswvl:amber:info"; - gpios = <&gpio0 38 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; led@4 { label = "lswvl:blue:func"; - gpios = <&gpio0 39 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; led@5 { label = "lswvl:blue:power"; - gpios = <&gpio0 40 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; default-state = "keep"; }; led@6 { label = "lswvl:red:hdderr0"; - gpios = <&gpio0 34 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led@7 { label = "lswvl:red:hdderr1"; - gpios = <&gpio0 35 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; }; }; @@ -233,7 +234,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; restart_poweroff { diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts index f5db16a08..b13ec20a7 100644 --- a/arch/arm/boot/dts/kirkwood-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-lswxl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WXL/WSXL * - * Copyright (C) 2015, rogershimizu@gmail.com + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -156,21 +157,21 @@ button@1 { label = "Function Button"; linux,code = <KEY_OPTION>; - gpios = <&gpio1 41 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio1 42 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio1 43 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -185,12 +186,12 @@ led@1 { label = "lswxl:blue:func"; - gpios = <&gpio1 36 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; led@2 { label = "lswxl:red:alarm"; - gpios = <&gpio1 49 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; led@3 { @@ -200,23 +201,23 @@ led@4 { label = "lswxl:blue:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; led@5 { label = "lswxl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - default-state = "keep"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led@6 { label = "lswxl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; led@7 { label = "lswxl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; }; @@ -225,15 +226,15 @@ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW - &gpio0 48 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW + &gpio1 15 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = <0 3 1500 2 3250 1 5000 0>; - alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; restart_poweroff { @@ -256,7 +257,7 @@ enable-active-high; regulator-always-on; regulator-boot-on; - gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; hdd_power0: regulator@2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts new file mode 100644 index 000000000..bc4ec9332 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa325.dts @@ -0,0 +1,238 @@ +/* Device tree file for the Zyxel NSA 325 NAS box. + * + * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based upon the board setup file created by Peter Schildmann + */ + +/dts-v1/; + +#include "kirkwood-nsa3x0-common.dtsi" + +/ { + model = "ZyXEL NSA325"; + compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-names = "default"; + + pmx_led_hdd2_green: pmx-led-hdd2-green { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_led_hdd2_red: pmx-led-hdd2-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_mcu_data: pmx-mcu-data { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_mcu_clk: pmx-mcu-clk { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_mcu_act: pmx-mcu-act { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_led_sys_orange: pmx-led-sys-orange { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led_hdd1_green: pmx-led-hdd1-green { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_hdd1_red: pmx-led-hdd1-red { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_htp: pmx-htp { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + /* + * Buzzer needs to be switched at around 1kHz so is + * not compatible with the gpio-beeper driver. + */ + pmx_buzzer: pmx-buzzer { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_vid_b1: pmx-vid-b1 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_power_resume_data: pmx-power-resume-data { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + pmx_power_resume_clk: pmx-power-resume-clk { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + + pmx_pwr_sata1: pmx-pwr-sata1 { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + + /* This board uses the pcf8563 RTC instead of the SoC RTC */ + rtc@10300 { + status = "disabled"; + }; + + i2c@11000 { + status = "okay"; + + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_pwr_sata1>; + pinctrl-names = "default"; + + usb0_power: regulator@1 { + enable-active-high; + }; + + sata1_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red + &pmx_led_usb_green + &pmx_led_sys_green &pmx_led_sys_orange + &pmx_led_copy_green &pmx_led_copy_red + &pmx_led_hdd1_green &pmx_led_hdd1_red>; + pinctrl-names = "default"; + + green-sys { + label = "nsa325:green:sys"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + orange-sys { + label = "nsa325:orange:sys"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + green-hdd1 { + label = "nsa325:green:hdd1"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + red-hdd1 { + label = "nsa325:red:hdd1"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + green-hdd2 { + label = "nsa325:green:hdd2"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + red-hdd2 { + label = "nsa325:red:hdd2"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + green-usb { + label = "nsa325:green:usb"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + green-copy { + label = "nsa325:green:copy"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + red-copy { + label = "nsa325:red:copy"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + + /* The following pins are currently not assigned to a driver, + some of them should be configured as inputs. + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act + &pmx_htp &pmx_vid_b1 + &pmx_power_resume_data &pmx_power_resume_clk>; */ + }; + + +}; + +&mdio { + status = "okay"; + ethphy0: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts new file mode 100644 index 000000000..8082d6426 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts @@ -0,0 +1,179 @@ +/* + * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4 + * inspired by the board files made by Kevin Mihelich for ArchLinux, + * and their DTS file. + * + * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org> + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6192.dtsi" +#include <dt-bindings/input/linux-event-codes.h> + +/ { + model = "Cloud Engines PogoPlug Series 4"; + compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192", + "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { + stdout-path = "uart0:115200n8"; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_button_eject>; + pinctrl-names = "default"; + + button@1 { + debounce_interval = <50>; + wakeup-source; + linux,code = <KEY_EJECTCD>; + label = "Eject Button"; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_green &pmx_led_red>; + pinctrl-names = "default"; + + health { + label = "pogoplugv4:green:health"; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + fault { + label = "pogoplugv4:red:fault"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl { + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp21"; + marvell,function = "sata0"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp20"; + marvell,function = "sata1"; + }; + + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + + pmx_sdio_wp: pmx-sdio-wp { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_button_eject: pmx-button-eject { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led_green: pmx-led-green { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + + pmx_led_red: pmx-led-red { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* + * This PCIE controller has a USB 3.0 XHCI controller at 1,0 + */ +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&sata { + status = "okay"; + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + nr-ports = <1>; +}; + +&sdio { + status = "okay"; + pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>; + pinctrl-names = "default"; + cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; +}; + +&nand { + /* 128 MiB of NAND flash */ + chip-delay = <40>; + status = "okay"; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x200000>; + read-only; + }; + + partition@200000 { + label = "uImage"; + reg = <0x00200000 0x300000>; + }; + + partition@500000 { + label = "uImage2"; + reg = <0x00500000 0x300000>; + }; + + partition@800000 { + label = "failsafe"; + reg = <0x00800000 0x800000>; + }; + + partition@1000000 { + label = "root"; + reg = <0x01000000 0x7000000>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 5b0430041..fb13f18c0 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -23,31 +23,37 @@ label = "sysboot2"; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */ linux,code = <BTN_0>; - gpio-key,wakeup; + wakeup-source; }; sysboot5 { label = "sysboot5"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */ linux,code = <BTN_1>; - gpio-key,wakeup; + wakeup-source; }; gpio1 { label = "gpio1"; gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */ linux,code = <BTN_2>; - gpio-key,wakeup; + wakeup-source; }; gpio2 { label = "gpio2"; gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */ linux,code = <BTN_3>; - gpio-key,wakeup; + wakeup-source; }; }; + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3logic"; + ti,mcbsp = <&mcbsp2>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -67,6 +73,20 @@ }; }; +&vaux1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +&vaux4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&mcbsp2 { + status = "okay"; +}; + &charger { ti,bb-uvolt = <3200000>; ti,bb-uamp = <150>; @@ -84,6 +104,70 @@ }; }; +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + vdds_dsi-supply = <&vpll2>; + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins1>; + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <16>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "15"; + status = "okay"; + /* default-on; */ + pinctrl-names = "default"; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <4>; + vsync-len = <11>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + bl: backlight { + compatible = "gpio-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>, /* gpio_56 */ + <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ + default-on; + }; +}; + &mmc1 { interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; pinctrl-names = "default"; @@ -119,6 +203,48 @@ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ >; }; + + tsc2004_pins: pinmux_tsc2004_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs5.gpio_56 */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ + >; + }; + + dss_dpi_pins1: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ + >; + }; }; &omap3_pmx_wkup { @@ -142,6 +268,27 @@ }; }; +&i2c3 { + touchscreen: tsc2004@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + vio-supply = <&vaux1>; + pinctrl-names = "default"; + pinctrl-0 = <&tsc2004_pins>; + interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; +}; + &uart1 { interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 80f6c786a..008053223 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -96,9 +96,22 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; + /* * Only found on the wireless SOM. For the SOM without wireless, the pins for * MMC3 can be routed with jumpers to the second MMC slot on the devkit and @@ -137,6 +150,29 @@ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */ >; }; + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */ + >; + }; + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ + >; + }; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 52591d83e..053a1f54f 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -166,6 +166,17 @@ status = "disabled"; }; + eeprom: eeprom@4000e000 { + compatible = "nxp,lpc1857-eeprom"; + reg = <0x4000e000 0x1000>, <0x20040000 0x4000>; + reg-names = "reg", "mem"; + clocks = <&ccu1 CLK_CPU_EEPROM>; + clock-names = "eeprom"; + resets = <&rgu 27>; + interrupts = <4>; + status = "disabled"; + }; + mac: ethernet@40010000 { compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac"; reg = <0x40010000 0x2000>; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 3abebb75f..c85cf9797 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -11,19 +11,20 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "nxp,lpc3220"; interrupt-parent = <&mic>; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0x0>; }; }; @@ -31,7 +32,8 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - ranges = <0x20000000 0x20000000 0x30000000>; + ranges = <0x20000000 0x20000000 0x30000000>, + <0xe0000000 0xe0000000 0x04000000>; /* * Enable either SLC or MLC @@ -49,30 +51,46 @@ status = "disabled"; }; - dma@31000000 { + dma: dma@31000000 { compatible = "arm,pl080", "arm,primecell"; reg = <0x31000000 0x1000>; interrupts = <0x1c 0>; }; - /* - * Enable either ohci or usbd (gadget)! - */ - ohci@31020000 { - compatible = "nxp,ohci-nxp", "usb-ohci"; - reg = <0x31020000 0x300>; - interrupts = <0x3b 0>; - status = "disabled"; - }; + usb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x31020000 0x00001000>; - usbd@31020000 { - compatible = "nxp,lpc3220-udc"; - reg = <0x31020000 0x300>; - interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; - status = "disabled"; + /* + * Enable either ohci or usbd (gadget)! + */ + ohci: ohci@0 { + compatible = "nxp,ohci-nxp", "usb-ohci"; + reg = <0x0 0x300>; + interrupts = <0x3b 0>; + status = "disabled"; + }; + + usbd: usbd@0 { + compatible = "nxp,lpc3220-udc"; + reg = <0x0 0x300>; + interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + status = "disabled"; + }; + + i2cusb: i2c@300 { + compatible = "nxp,pnx-i2c"; + reg = <0x300 0x100>; + interrupts = <0x3f 0>; + #address-cells = <1>; + #size-cells = <0>; + pnx,timeout = <0x64>; + }; }; - clcd@31040000 { + clcd: clcd@31040000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x31040000 0x1000>; interrupts = <0x0e 0>; @@ -85,6 +103,19 @@ interrupts = <0x1d 0>; }; + emc: memory-controller@31080000 { + compatible = "arm,pl175", "arm,primecell"; + reg = <0x31080000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xe0000000 0x01000000>, + <1 0xe1000000 0x01000000>, + <2 0xe2000000 0x01000000>, + <3 0xe3000000 0x01000000>; + status = "disabled"; + }; + apb { #address-cells = <1>; #size-cells = <1>; @@ -118,7 +149,7 @@ reg = <0x20094000 0x1000>; }; - sd@20098000 { + sd: sd@20098000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x20098000 0x1000>; interrupts = <0x0f 0>, <0x0d 0>; @@ -192,15 +223,6 @@ status = "disabled"; #pwm-cells = <2>; }; - - i2cusb: i2c@31020300 { - compatible = "nxp,pnx-i2c"; - reg = <0x31020300 0x100>; - interrupts = <0x3f 0>; - #address-cells = <1>; - #size-cells = <0>; - pnx,timeout = <0x64>; - }; }; fab { @@ -243,7 +265,7 @@ status = "disabled"; }; - rtc@40024000 { + rtc: rtc@40024000 { compatible = "nxp,lpc3220-rtc"; reg = <0x40024000 0x1000>; interrupts = <0x34 0>; @@ -256,11 +278,31 @@ #gpio-cells = <3>; /* bank, pin, flags */ }; - watchdog@4003C000 { + timer4: timer@4002C000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x4002C000 0x1000>; + interrupts = <0x3 0>; + status = "disabled"; + }; + + timer5: timer@40030000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40030000 0x1000>; + interrupts = <0x4 0>; + status = "disabled"; + }; + + watchdog: watchdog@4003C000 { compatible = "nxp,pnx4008-wdt"; reg = <0x4003C000 0x1000>; }; + timer0: timer@40044000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40044000 0x1000>; + interrupts = <0x10 0>; + }; + /* * TSC vs. ADC: Since those two share the same * hardware, you need to choose from one of the @@ -268,30 +310,56 @@ * them */ - adc@40048000 { + adc: adc@40048000 { compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; status = "disabled"; }; - tsc@40048000 { + tsc: tsc@40048000 { compatible = "nxp,lpc3220-tsc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; status = "disabled"; }; - key@40050000 { + timer1: timer@4004C000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x4004C000 0x1000>; + interrupts = <0x11 0>; + }; + + key: key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; interrupts = <54 0>; status = "disabled"; }; - pwm: pwm@4005C000 { + timer2: timer@40058000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40058000 0x1000>; + interrupts = <0x12 0>; + status = "disabled"; + }; + + pwm1: pwm@4005C000 { compatible = "nxp,lpc3220-pwm"; - reg = <0x4005C000 0x8>; + reg = <0x4005C000 0x4>; + status = "disabled"; + }; + + pwm2: pwm@4005C004 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005C004 0x4>; + status = "disabled"; + }; + + timer3: timer@40060000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40060000 0x1000>; + interrupts = <0x13 0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts index 5f500c1ad..5cfadb06c 100644 --- a/arch/arm/boot/dts/lpc4337-ciaa.dts +++ b/arch/arm/boot/dts/lpc4337-ciaa.dts @@ -99,6 +99,14 @@ }; }; + i2c0_pins: i2c0-pins { + i2c0_pins_cfg { + pins = "i2c0_scl", "i2c0_sda"; + function = "i2c0"; + input-enable; + }; + }; + ssp_pins: ssp-pins { ssp1_cs { pins = "p6_7"; @@ -159,6 +167,28 @@ clock-frequency = <50000000>; }; +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "microchip,24c512"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "microchip,24c02"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "microchip,24c512"; + reg = <0x54>; + }; +}; + &mac { status = "okay"; phy-mode = "rmii"; @@ -166,6 +196,10 @@ pinctrl-0 = <&enet_rmii_pins>; }; +&sct_pwm { + status = "okay"; +}; + &ssp1 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 391121d24..079d3cf8c 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -467,6 +467,11 @@ pinctrl-0 = <&i2c0_pins>; clock-frequency = <400000>; + mma7455@1d { + compatible = "fsl,mma7455"; + reg = <0x1d>; + }; + lm75@48 { compatible = "nxp,lm75"; reg = <0x48>; diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/lpc4357.dtsi index fb9ecc754..72f12db8d 100644 --- a/arch/arm/boot/dts/lpc4357.dtsi +++ b/arch/arm/boot/dts/lpc4357.dtsi @@ -37,3 +37,7 @@ }; }; }; + +&eeprom { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts index 0521e6864..940875316 100644 --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -320,6 +320,10 @@ status = "okay"; }; +&sata { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index fbb89d134..75ecaed32 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -105,6 +105,15 @@ bitclock-master; }; }; + + panel: panel { + compatible = "nec,nl4827hc19-05b"; + }; +}; + +&dcu { + fsl,panel = <&panel>; + status = "okay"; }; &dspi1 { @@ -212,6 +221,10 @@ status = "okay"; }; +&sata { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 9430a9928..2c84ca236 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -143,6 +143,17 @@ status = "disabled"; }; + sata: sata@3200000 { + compatible = "fsl,ls1021a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20220520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + dma-coherent; + status = "disabled"; + }; + scfg: scfg@1570000 { compatible = "fsl,ls1021a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; @@ -428,6 +439,16 @@ <&platform_clk 1>; }; + dcu: dcu@2ce0000 { + compatible = "fsl,ls1021a-dcu"; + reg = <0x0 0x2ce0000 0x0 0x10000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 0>; + clock-names = "dcu"; + big-endian; + status = "disabled"; + }; + mdio0: mdio@2d24000 { compatible = "gianfar"; device_type = "mdio"; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index a8e2911b2..e50f1a1fd 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -46,6 +46,7 @@ /dts-v1/; #include "meson8b.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Hardkernel ODROID-C1"; @@ -58,6 +59,16 @@ memory { reg = <0x40000000 0x40000000>; }; + + leds { + compatible = "gpio-leds"; + blue { + label = "c1:blue:alive"; + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; }; &uart_AO { diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index ee352bf68..8bad5571a 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -105,6 +105,12 @@ #interrupt-cells = <3>; }; + wdt: watchdog@c1109900 { + compatible = "amlogic,meson8b-wdt"; + reg = <0xc1109900 0x8>; + interrupts = <0 0 1>; + }; + timer@c1109940 { compatible = "amlogic,meson6-timer"; reg = <0xc1109940 0x18>; diff --git a/arch/arm/mach-netx/include/mach/param.h b/arch/arm/boot/dts/mt2701-evb.dts index a77145920..082ca8807 100644 --- a/arch/arm/mach-netx/include/mach/param.h +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -1,18 +1,29 @@ /* - * arch/arm/mach-netx/include/mach/param.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * Copyright (c) 2015 MediaTek Inc. + * Author: Erin Lo <erin.lo@mediatek.com> * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ + +/dts-v1/; +#include "mt2701.dtsi" + +/ { + model = "MediaTek MT2701 evaluation board"; + compatible = "mediatek,mt2701-evb", "mediatek,mt2701"; + + memory { + reg = <0 0x80000000 0 0x40000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi new file mode 100644 index 000000000..3766904b6 --- /dev/null +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -0,0 +1,146 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Erin.Lo <erin.lo@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton64.dtsi" + +/ { + compatible = "mediatek,mt2701"; + interrupt-parent = <&sysirq>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + }; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt2701-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; + }; + + timer: timer@10008000 { + compatible = "mediatek,mt2701-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10008000 0 0x80>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt2701-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200100 0 0x1c>; + }; + + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10211000 0 0x1000>, + <0 0x10212000 0 0x1000>, + <0 0x10214000 0 0x2000>, + <0 0x10216000 0 0x2000>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt2701-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt2701-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt2701-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt2701-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index cb99b02d2..1d7f92bdc 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -15,7 +15,7 @@ #include <dt-bindings/clock/mt8135-clk.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset-controller/mt8135-resets.h> +#include <dt-bindings/reset/mt8135-resets.h> #include "skeleton64.dtsi" #include "mt8135-pinfunc.h" diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 73f1e3a8f..01e1e2d5c 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -69,7 +69,7 @@ label = "user"; gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; linux,code = <0x114>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -176,18 +176,18 @@ &omap3_pmx_wkup { gpio1_pins: pinmux_gpio1_pins { pinctrl-single,pins = < - 0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */ + OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */ >; }; dss_dpi_pins2: pinmux_dss_dpi_pins1 { pinctrl-single,pins = < - 0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ - 0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ - 0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ - 0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ - 0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ - 0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ + OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ + OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ + OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ >; }; }; @@ -200,8 +200,8 @@ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ >; }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 274c2c482..8ba465d57 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -80,7 +80,7 @@ label = "user"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; linux,code = <0x114>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -171,7 +171,7 @@ &omap3_pmx_wkup { gpio1_pins: pinmux_gpio1_pins { pinctrl-single,pins = < - 0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ >; }; }; @@ -195,47 +195,47 @@ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; tfp410_pins: pinmux_tfp410_pins { pinctrl-single,pins = < - 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ >; }; dss_dpi_pins: pinmux_dss_dpi_pins { pinctrl-single,pins = < - 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ - 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ - 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ - 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ - 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ - 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ - 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ - 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ - 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ - 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ - 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ - 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; }; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 8c813e77b..e5f7f5c92 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -238,7 +238,7 @@ ti,debounce-tol = /bits/ 16 <10>; ti,debounce-rep = /bits/ 16 <1>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 9ca2865a8..86850bb31 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -64,7 +64,7 @@ label = "user"; gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; linux,code = <BTN_EXTRA>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index 4813e9615..738910db5 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -68,6 +68,6 @@ ti,keep-vref-on = <1>; ti,settle-delay-usec = /bits/ 16 <150>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index bb339d164..ac188657a 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -66,48 +66,48 @@ mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - 0x120 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ - 0x122 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ - 0x124 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ - 0x126 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ + OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ + OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ >; }; /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */ mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ - 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - 0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ - 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - 0x150 (PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ - 0x14e (PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ + OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ + OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ >; }; smsc911x_pins: pinmux_smsc911x_pins { pinctrl-single,pins = < - 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ >; }; }; @@ -115,12 +115,12 @@ &omap3_pmx_wkup { dss_dpi_pins2: pinmux_dss_dpi_pins1 { pinctrl-single,pins = < - 0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ - 0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ - 0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ - 0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ - 0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ - 0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ + OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ + OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ + OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ >; }; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index e14d15e5a..5e2d6433d 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -37,7 +37,7 @@ label = "aux"; linux,code = <169>; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 3835e1569..33d6b4ead 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -15,25 +15,17 @@ model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; - /* Regulator to trigger the WIFI_PDN signal of the Wifi module */ - lbee1usjyc_pdn: lbee1usjyc_pdn { + vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; - regulator-name = "regulator-lbee1usjyc-pdn"; + regulator-name = "vmmcsdio_fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */ - startup-delay-us = <10000>; - enable-active-high; }; - /* Regulator to trigger the RESET_N_W signal of the Wifi module */ - lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w { - compatible = "regulator-fixed"; - regulator-name = "regulator-lbee1usjyc-reset-n-w"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */ - enable-active-high; + mmc2_pwrseq: mmc2_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */ + <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */ }; }; @@ -51,8 +43,8 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>; - vmmc-supply = <&lbee1usjyc_pdn>; - vmmc_aux-supply = <&lbee1usjyc_reset_n_w>; + vmmc-supply = <&vmmcsdio_fixed>; + mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; non-removable; }; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 468608dab..55b0cc4f5 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -15,25 +15,17 @@ model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; - /* Regulator to trigger the WIFI_PDN signal of the Wifi module */ - lbee1usjyc_pdn: lbee1usjyc_pdn { + vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; - regulator-name = "regulator-lbee1usjyc-pdn"; + regulator-name = "vmmcsdio_fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */ - startup-delay-us = <10000>; - enable-active-high; }; - /* Regulator to trigger the RESET_N_W signal of the Wifi module */ - lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w { - compatible = "regulator-fixed"; - regulator-name = "regulator-lbee1usjyc-reset-n-w"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */ - enable-active-high; + mmc2_pwrseq: mmc2_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */ + <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */ }; }; @@ -62,8 +54,8 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>; - vmmc-supply = <&lbee1usjyc_pdn>; - vmmc_aux-supply = <&lbee1usjyc_reset_n_w>; + vmmc-supply = <&vmmcsdio_fixed>; + mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; non-removable; }; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index d2fab8c0d..540163025 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -35,63 +35,63 @@ label = "enter"; gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */ linux,code = <KEY_ENTER>; - gpio-key,wakeup; + wakeup-source; }; key_f1 { label = "f1"; gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */ linux,code = <KEY_F1>; - gpio-key,wakeup; + wakeup-source; }; key_f2 { label = "f2"; gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */ linux,code = <KEY_F2>; - gpio-key,wakeup; + wakeup-source; }; key_f3 { label = "f3"; gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */ linux,code = <KEY_F3>; - gpio-key,wakeup; + wakeup-source; }; key_f4 { label = "f4"; gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */ linux,code = <KEY_F4>; - gpio-key,wakeup; + wakeup-source; }; key_left { label = "left"; gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */ linux,code = <KEY_LEFT>; - gpio-key,wakeup; + wakeup-source; }; key_right { label = "right"; gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */ linux,code = <KEY_RIGHT>; - gpio-key,wakeup; + wakeup-source; }; key_up { label = "up"; gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */ linux,code = <KEY_UP>; - gpio-key,wakeup; + wakeup-source; }; key_down { label = "down"; gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */ linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; }; }; }; @@ -224,32 +224,32 @@ &omap3_pmx_core { gpio_key_pins: pinmux_gpio_key_pins { pinctrl-single,pins = < - 0xea (PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */ - 0xec (PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */ - 0xee (PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */ - 0xf0 (PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */ - 0xf2 (PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */ - 0xf4 (PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */ - 0xf6 (PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */ - 0xf8 (PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */ - 0xfa (PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */ + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */ + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */ + OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */ >; }; musb_pins: pinmux_musb_pins { pinctrl-single,pins = < - 0x172 (PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ - 0x17a (PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ - 0x17c (PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ - 0x17e (PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ - 0x180 (PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ - 0x182 (PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ - 0x184 (PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ - 0x186 (PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ - 0x188 (PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ - 0x176 (PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ - 0x178 (PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ - 0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ >; }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 57d7c93cc..93f8dfe20 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -327,7 +327,7 @@ ti,pressure-max = /bits/ 16 <255>; ti,swap-xy; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 5f5e0f3d5..74d8f7eb5 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -67,28 +67,28 @@ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ linux,input-type = <5>; /* EV_SW */ linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */ - gpio-key,wakeup; + wakeup-source; }; camera_focus { label = "Camera Focus"; gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ linux,code = <0x210>; /* KEY_CAMERA_FOCUS */ - gpio-key,wakeup; + wakeup-source; }; camera_capture { label = "Camera Capture"; gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ linux,code = <0xd4>; /* KEY_CAMERA */ - gpio-key,wakeup; + wakeup-source; }; lock_button { label = "Lock Button"; gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ linux,code = <0x98>; /* KEY_SCREENLOCK */ - gpio-key,wakeup; + wakeup-source; }; keypad_slide { @@ -96,7 +96,7 @@ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ linux,input-type = <5>; /* EV_SW */ linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */ - gpio-key,wakeup; + wakeup-source; }; proximity_sensor { @@ -149,15 +149,15 @@ uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx */ - 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ >; }; @@ -198,22 +198,22 @@ i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ - 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ - 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */ - 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ >; }; @@ -225,85 +225,85 @@ mcspi4_pins: pinmux_mcspi4_pins { pinctrl-single,pins = < - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ - 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ - 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ - 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ + OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ + OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ - 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ - 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ - 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ - 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ - 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ - 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ - 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ - 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ - 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ - 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ - 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ >; }; acx565akm_pins: pinmux_acx565akm_pins { pinctrl-single,pins = < - 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ >; }; dss_sdi_pins: pinmux_dss_sdi_pins { pinctrl-single,pins = < - 0x0c0 (PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */ - 0x0c2 (PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */ - 0x0c4 (PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */ - 0x0c6 (PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */ - 0x0d8 (PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */ - 0x0da (PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ >; }; wl1251_pins: pinmux_wl1251 { pinctrl-single,pins = < - 0x0ce (PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ - 0x05a (PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ + OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ >; }; ssi_pins: pinmux_ssi { pinctrl-single,pins = < - 0x150 (PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ - 0x14e (PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ - 0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ - 0x14c (PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ - 0x154 (PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ - 0x156 (PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ - 0x158 (PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ - 0x15a (PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ >; }; modem_pins: pinmux_modem { pinctrl-single,pins = < - 0x0ac (PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ - 0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ - 0x0b2 (PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ - 0x0b4 (PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ - 0x0b6 (PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ - 0x15e (PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ >; }; }; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index e9ee1df0e..a2c2b8d8d 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -36,12 +36,12 @@ &omap3_pmx_core { mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ - 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ - 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ - 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ >; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi index 7aae8fb82..3b3a75997 100644 --- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi @@ -48,7 +48,7 @@ label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio_10 */ - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 17b82f826..7df27926e 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -41,13 +41,13 @@ label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ - gpio-key,wakeup; + wakeup-source; }; button1@14 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index b09cedf66..6314da258 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -161,6 +161,6 @@ ti,x-plate-ohms = /bits/ 16 <180>; ti,pressure-max = /bits/ 16 <255>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 5f9795905..7e3fe85a8 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -172,7 +172,7 @@ ti,x-plate-ohms = /bits/ 16 <180>; ti,pressure-max = /bits/ 16 <255>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi index 49d2254a9..250cc7fe5 100644 --- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi @@ -41,13 +41,13 @@ label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ - gpio-key,wakeup; + wakeup-source; }; button1@14 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi index 680d72623..8df7ec35d 100644 --- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi @@ -41,13 +41,13 @@ label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ - gpio-key,wakeup; + wakeup-source; }; button1@14 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi index 087aedf5b..0ea2c451c 100644 --- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi @@ -41,13 +41,13 @@ label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ - gpio-key,wakeup; + wakeup-source; }; button1@14 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index cfe140c65..13e9d1f98 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -84,112 +84,112 @@ label = "up"; linux,code = <KEY_UP>; gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */ - gpio-key,wakeup; + wakeup-source; }; down-button { label = "down"; linux,code = <KEY_DOWN>; gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */ - gpio-key,wakeup; + wakeup-source; }; left-button { label = "left"; linux,code = <KEY_LEFT>; gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */ - gpio-key,wakeup; + wakeup-source; }; right-button { label = "right"; linux,code = <KEY_RIGHT>; gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */ - gpio-key,wakeup; + wakeup-source; }; pageup-button { label = "game 1"; linux,code = <KEY_PAGEUP>; gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */ - gpio-key,wakeup; + wakeup-source; }; pagedown-button { label = "game 3"; linux,code = <KEY_PAGEDOWN>; gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */ - gpio-key,wakeup; + wakeup-source; }; home-button { label = "game 4"; linux,code = <KEY_HOME>; gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */ - gpio-key,wakeup; + wakeup-source; }; end-button { label = "game 2"; linux,code = <KEY_END>; gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */ - gpio-key,wakeup; + wakeup-source; }; right-shift { label = "l"; linux,code = <KEY_RIGHTSHIFT>; gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */ - gpio-key,wakeup; + wakeup-source; }; kp-plus { label = "l2"; linux,code = <KEY_KPPLUS>; gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */ - gpio-key,wakeup; + wakeup-source; }; right-ctrl { label = "r"; linux,code = <KEY_RIGHTCTRL>; gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */ - gpio-key,wakeup; + wakeup-source; }; kp-minus { label = "r2"; linux,code = <KEY_KPMINUS>; gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */ - gpio-key,wakeup; + wakeup-source; }; left-ctrl { label = "ctrl"; linux,code = <KEY_LEFTCTRL>; gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */ - gpio-key,wakeup; + wakeup-source; }; menu { label = "menu"; linux,code = <KEY_MENU>; gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */ - gpio-key,wakeup; + wakeup-source; }; hold { label = "hold"; linux,code = <KEY_COFFEE>; gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */ - gpio-key,wakeup; + wakeup-source; }; left-alt { label = "alt"; linux,code = <KEY_LEFTALT>; gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */ - gpio-key,wakeup; + wakeup-source; }; lid { @@ -617,7 +617,7 @@ ti,x-plate-ohms = /bits/ 16 <40>; ti,pressure-max = /bits/ 16 <255>; - linux,wakeup; + wakeup-source; }; lcd: lcd@1 { diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi index f4b1a6185..157345bb8 100644 --- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi +++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi @@ -66,6 +66,6 @@ ti,x-plate-ohms = /bits/ 16 <40>; ti,pressure-max = /bits/ 16 <255>; ti,swap-xy; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 7bc5fdd69..f19170bdc 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -54,27 +54,27 @@ /* REVISIT: twl gpio0 is mmc0_cd */ mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - 0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ - 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ - 0x12c (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - 0x12e (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ - 0x130 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ - 0x132 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ - 0x134 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */ - 0x136 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */ - 0x138 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */ - 0x13a (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */ + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */ >; }; @@ -87,35 +87,35 @@ uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x150 (PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ - 0x14e (PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ - 0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ - 0x14c (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ + OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - 0x144 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ - 0x146 (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ - 0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ - 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ - 0x16c (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ - 0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; /* wl12xx GPIO output for WLAN_EN */ wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - 0xea (PIN_OUTPUT| MUX_MODE4) /* cam_d2.gpio_101 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4) /* cam_d2.gpio_101 */ >; }; }; @@ -135,7 +135,7 @@ &omap3_pmx_wkup { wlan_host_wkup: pinmux_wlan_host_wkup_pins { pinctrl-single,pins = < - 0x1a (PIN_INPUT_PULLUP | MUX_MODE4) /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */ + OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */ >; }; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 8a2b25332..d1ffabb7c 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -717,6 +717,8 @@ ti,hwmods = "gpmc"; reg = <0x6e000000 0x02d0>; interrupts = <20>; + dmas = <&sdma 4>; + dma-names = "rxtx"; gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; #address-cells = <2>; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index b75f7b2b7..06c54822d 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -36,7 +36,7 @@ label = "button0"; linux,code = <BTN_0>; gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index 133f1b74e..78d363177 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -13,8 +13,8 @@ /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ - 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 18d096696..df2e356ec 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -199,129 +199,129 @@ twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < - 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ - 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ + OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ + OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; }; mcpdm_pins: pinmux_mcpdm_pins { pinctrl-single,pins = < - 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ + OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ + OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ + OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ + OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ >; }; mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < - 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ - 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ - 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ - 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ + OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ + OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ + OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ + OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ >; }; dss_dpi_pins: pinmux_dss_dpi_pins { pinctrl-single,pins = < - 0x122 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ - 0x124 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ - 0x126 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */ - 0x128 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */ - 0x12a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */ - 0x12c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */ - 0x12e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */ - 0x130 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */ - 0x132 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */ - 0x134 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */ - 0x136 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */ - - 0x174 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */ - 0x176 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */ - 0x178 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */ - 0x17a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */ - 0x17c (PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */ - 0x17e (PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */ - 0x180 (PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */ - 0x182 (PIN_OUTPUT | MUX_MODE5) /* dispc2_de */ - 0x184 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */ - 0x186 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */ - 0x188 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */ - 0x18a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */ - 0x18c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */ - 0x18e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */ - - 0x190 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */ - 0x192 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */ - 0x194 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */ + OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ + OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ + OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */ + OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */ + OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */ + OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */ + OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */ + OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */ + OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */ + OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */ + OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */ + + OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */ + OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */ + OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */ + OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */ + OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */ + OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */ + OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */ + OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */ + OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */ + OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */ + OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */ + OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */ + OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */ + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */ + + OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */ + OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */ + OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */ >; }; tfp410_pins: pinmux_tfp410_pins { pinctrl-single,pins = < - 0x144 (PIN_OUTPUT | MUX_MODE3) /* gpio_0 */ + OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3) /* gpio_0 */ >; }; dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < - 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ - 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; }; tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < - 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ - 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ - 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ + OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ + OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ + OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ >; }; hsusbb1_pins: pinmux_hsusbb1_pins { pinctrl-single,pins = < - 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ - 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ - 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ - 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ - 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ - 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ - 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ - 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ - 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ - 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ - 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ - 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ + OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ + OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ + OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ + OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ + OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ + OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ + OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ + OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ + OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ + OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ + OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ - 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ - 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; i2c4_pins: pinmux_i2c4_pins { pinctrl-single,pins = < - 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ - 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; @@ -331,24 +331,24 @@ */ wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ - 0x2c (PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */ - 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */ - 0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */ + OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ + OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */ + OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */ + OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */ >; }; /* wl12xx GPIO inputs and SDIO pins */ wl12xx_pins: pinmux_wl12xx_pins { pinctrl-single,pins = < - 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ - 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ - 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ - 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ - 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ - 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ + OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; }; @@ -356,8 +356,8 @@ &omap4_pmx_wkup { led_wkgpio_pins: pinmux_leds_wkpins { pinctrl-single,pins = < - 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ - 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ + OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ >; }; }; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 2f1dabcc6..119f8e657 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -34,23 +34,23 @@ /* PandaboardES has external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ - 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; }; &omap4_pmx_core { led_gpio_pins: gpio_led_pmx { pinctrl-single,pins = < - 0xb6 (PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ + OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ >; }; }; &led_wkgpio_pins { pinctrl-single,pins = < - 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ >; }; diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts index aad5dda0f..b4d19a7ae 100644 --- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts +++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts @@ -10,8 +10,8 @@ /* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ - 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index f0bdc41f8..aae513265 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -212,143 +212,143 @@ uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ - 0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ - 0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ - 0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ - 0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ - 0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < - 0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */ - 0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */ + OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */ + OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */ >; }; twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < - 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ - 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ + OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ + OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; }; mcpdm_pins: pinmux_mcpdm_pins { pinctrl-single,pins = < - 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ + OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ + OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ + OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ + OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ >; }; dmic_pins: pinmux_dmic_pins { pinctrl-single,pins = < - 0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */ - 0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */ - 0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */ - 0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */ + OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */ + OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */ + OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */ + OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */ >; }; mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < - 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ - 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ - 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ - 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ + OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ + OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ + OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ + OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ >; }; mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < - 0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */ - 0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */ - 0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */ - 0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */ + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */ + OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */ + OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */ + OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */ >; }; mcspi1_pins: pinmux_mcspi1_pins { pinctrl-single,pins = < - 0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ - 0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ - 0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ - 0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ >; }; dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < - 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ - 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; }; tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < - 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ - 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ - 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ + OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ + OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ + OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ - 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ - 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; i2c4_pins: pinmux_i2c4_pins { pinctrl-single,pins = < - 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ - 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; /* wl12xx GPIO output for WLAN_EN */ wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - 0x3c (PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */ + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */ >; }; /* wl12xx GPIO inputs and SDIO pins */ wl12xx_pins: pinmux_wl12xx_pins { pinctrl-single,pins = < - 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ - 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ - 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ - 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ - 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ + OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; }; diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi index f2d2fdb75..6e278d771 100644 --- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi +++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi @@ -41,7 +41,7 @@ label = "user"; gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */ linux,code = <BTN_EXTRA>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 5a206c100..2bd9c8330 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -348,12 +348,22 @@ #interrupt-cells = <2>; }; + elm: elm@48078000 { + compatible = "ti,am3352-elm"; + reg = <0x48078000 0x2000>; + interrupts = <4>; + ti,hwmods = "elm"; + status = "disabled"; + }; + gpmc: gpmc@50000000 { compatible = "ti,omap4430-gpmc"; reg = <0x50000000 0x1000>; #address-cells = <2>; #size-cells = <1>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 4>; + dma-names = "rxtx"; gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 41e80e7f2..902657d67 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -149,60 +149,60 @@ twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < - 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ + OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ >; }; mcpdm_pins: pinmux_mcpdm_pins { pinctrl-single,pins = < - 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ - 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ - 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ - 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ + OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ + OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ + OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ + OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ >; }; mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < - 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ - 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ - 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ - 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ + OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ + OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ + OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ + OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ >; }; mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < - 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ - 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ - 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ - 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ + OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ + OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ + OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ + OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; mcspi2_pins: pinmux_mcspi2_pins { pinctrl-single,pins = < - 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ - 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ - 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ - 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ + OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ + OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ + OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ + OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ >; }; mcspi3_pins: pinmux_mcspi3_pins { pinctrl-single,pins = < - 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ - 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ - 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ - 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ + OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ + OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ + OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ + OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ >; }; @@ -232,59 +232,59 @@ usbhost_pins: pinmux_usbhost_pins { pinctrl-single,pins = < - 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ - 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ + OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ + OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ - 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ - 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ + OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ + OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ - 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ - 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ + OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ + OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ >; }; led_gpio_pins: pinmux_led_gpio_pins { pinctrl-single,pins = < - 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ + OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ - 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ - 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ - 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ + OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ + OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ + OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ + OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ - 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ + OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ + OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ >; }; uart5_pins: pinmux_uart5_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ - 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ - 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ - 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ + OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ + OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ + OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ + OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ >; }; dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < - 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ - 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ + OMAP5_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ + OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ >; }; tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < - 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ + OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ >; }; }; @@ -303,13 +303,13 @@ usbhost_wkup_pins: pinmux_usbhost_wkup_pins { pinctrl-single,pins = < - 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ + OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ >; }; wlcore_irq_pin: pinmux_wlcore_irq_pin { pinctrl-single,pins = < - OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ >; }; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 3774b37be..ecc591dc0 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -175,7 +175,7 @@ ads7846_pins: pinmux_ads7846_pins { pinctrl-single,pins = < - 0x02 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */ + OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */ >; }; }; @@ -359,7 +359,7 @@ ti,debounce-tol = /bits/ 16 <10>; ti,debounce-rep = /bits/ 16 <1>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 05b1c1ebd..60b3fbb3b 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -40,8 +40,8 @@ &omap5_pmx_core { i2c5_pins: pinmux_i2c5_pins { pinctrl-single,pins = < - 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ - 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ + OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0) /* i2c5_scl */ + OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0) /* i2c5_sda */ >; }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4c04389da..ca3c17fde 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -391,6 +391,8 @@ #address-cells = <2>; #size-cells = <1>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 4>; + dma-names = "rxtx"; gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 3daec912b..aae8a7ace 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WTGL * - * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com> + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -69,8 +70,6 @@ internal-regs { pinctrl: pinctrl@10000 { - pinctrl-0 = <&pmx_usb_power &pmx_power_hdd - &pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; pmx_led_power: pmx-leds { @@ -162,6 +161,7 @@ led@1 { label = "lswtgl:blue:power"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; led@2 { @@ -188,7 +188,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; restart_poweroff { @@ -228,6 +228,37 @@ }; }; +&devbus_bootcs { + status = "okay"; + devbus,keep-config; + + flash@0 { + compatible = "jedec-flash"; + reg = <0 0x40000>; + bank-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + header@0 { + reg = <0 0x30000>; + read-only; + }; + + uboot@30000 { + reg = <0x30000 0xF000>; + read-only; + }; + + uboot_env@3F000 { + reg = <0x3F000 0x1000>; + }; + }; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index 90fdbd77f..7d253bb62 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "lpc32xx.dtsi" +#include "lpc32xx.dtsi" / { model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250"; @@ -22,7 +22,7 @@ memory { device_type = "memory"; - reg = <0 0x4000000>; + reg = <0x80000000 0x4000000>; }; ahb { @@ -31,19 +31,6 @@ use-iram; }; - /* Here, choose exactly one from: ohci, usbd */ - ohci@31020000 { - transceiver = <&isp1301>; - status = "okay"; - }; - -/* - usbd@31020000 { - transceiver = <&isp1301>; - status = "okay"; - }; -*/ - clcd@31040000 { status = "okay"; }; @@ -123,15 +110,6 @@ clock-frequency = <100000>; }; - i2cusb: i2c@31020300 { - clock-frequency = <100000>; - - isp1301: usb-transceiver@2c { - compatible = "nxp,isp1301"; - reg = <0x2c>; - }; - }; - ssp0: ssp@20084000 { #address-cells = <1>; #size-cells = <0>; @@ -200,3 +178,18 @@ }; }; }; + +/* Here, choose exactly one from: ohci, usbd */ +&ohci /* &usbd */ { + transceiver = <&isp1301>; + status = "okay"; +}; + +&i2cusb { + clock-frequency = <100000>; + + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 03784f136..21095dad7 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -54,7 +54,7 @@ /* Buck SMPS */ - pm8921_s1: s1 { + s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -62,43 +62,43 @@ bias-pull-down; }; - pm8921_s3: s3 { + s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <4800000>; }; - pm8921_s4: s4 { + s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; - pm8921_s7: s7 { + s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - pm8921_l3: l3 { + l3 { regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - pm8921_l4: l4 { + l4 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - pm8921_l5: l5 { + l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - pm8921_l23: l23 { + l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; bias-pull-down; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 11ac608b6..fd4d49ef9 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -47,6 +47,18 @@ bias-disable; }; }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; }; rpm@108000 { @@ -64,7 +76,7 @@ /* Buck SMPS */ - pm8921_s1: s1 { + s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -72,55 +84,59 @@ bias-pull-down; }; - pm8921_s3: s3 { + s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <4800000>; }; - pm8921_s4: s4 { + s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; - pm8921_s7: s7 { + s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - pm8921_l3: l3 { + l3 { regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - pm8921_l4: l4 { + l4 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - pm8921_l5: l5 { + l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - pm8921_l6: l6 { + l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - pm8921_l23: l23 { + l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; bias-pull-down; }; - pm8921_lvs1: lvs1 { + lvs1 { + bias-pull-down; + }; + + lvs6 { bias-pull-down; }; }; @@ -164,7 +180,7 @@ gsbi@16500000 { status = "ok"; - qcom,mode = <GSBI_PROT_I2C_UART>; + qcom,mode = <GSBI_PROT_UART_W_FC>; serial@16540000 { status = "ok"; @@ -231,6 +247,16 @@ status = "okay"; }; + pci@1b500000 { + status = "ok"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + qcom,ssbi@500000 { pmic@0 { gpio@150 { diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts new file mode 100644 index 000000000..06b3c76c3 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -0,0 +1,436 @@ +#include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/mfd/qcom-rpm.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Sony Xperia Z"; + compatible = "sony,xperia-yuga", "qcom,apq8064"; + + aliases { + serial0 = &gsbi5_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + soc { + pinctrl@800000 { + gsbi5_uart_pin_a: gsbi5-uart-pin-active { + rx { + pins = "gpio52"; + function = "gsbi5"; + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio51"; + function = "gsbi5"; + drive-strength = <4>; + bias-disable; + }; + }; + + sdcc1_pin_a: sdcc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strengh = <16>; + bias-disable; + }; + + cmd { + pins = "sdc1_cmd"; + drive-strengh = <10>; + bias-pull-up; + }; + + data { + pins = "sdc1_data"; + drive-strengh = <10>; + bias-pull-up; + }; + }; + + sdcc3_pin_a: sdcc3-pin-active { + clk { + pins = "sdc3_clk"; + drive-strengh = <8>; + bias-disable; + }; + + cmd { + pins = "sdc3_cmd"; + drive-strengh = <8>; + bias-pull-up; + }; + + data { + pins = "sdc3_data"; + drive-strengh = <8>; + bias-pull-up; + }; + }; + + sdcc3_cd_pin_a: sdcc3-cd-pin-active { + pins = "gpio26"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + + + rpm@108000 { + regulators { + vin_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs_1_3_6-supply = <&pm8921_s4>; + vin_lvs_4_5_7-supply = <&pm8921_s4>; + vin_ncp-supply = <&pm8921_l6>; + vin_lvs2-supply = <&pm8921_s4>; + vin_l24-supply = <&pm8921_s1>; + vin_l25-supply = <&pm8921_s1>; + vin_l27-supply = <&pm8921_s7>; + vin_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + s8 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + }; + + /* PMOS LDO */ + l1 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + bias-pull-down; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + l10 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + bias-pull-down; + }; + + l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + l12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + l17 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + bias-pull-down; + }; + + l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + l21 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + l22 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + + l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + l25 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + l27 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + l28 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + l29 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + lvs1 { + bias-pull-down; + }; + + lvs2 { + bias-pull-down; + }; + + lvs3 { + bias-pull-down; + }; + + lvs4 { + bias-pull-down; + }; + + lvs5 { + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + + lvs7 { + bias-pull-down; + }; + + usb-switch {}; + + hdmi-switch {}; + + ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; + }; + + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + gpio_keys_pin_a: gpio-keys-pin-active { + pins = "gpio3", "gpio4", "gpio29", "gpio35"; + function = "normal"; + + bias-pull-up; + drive-push-pull; + input-enable; + power-source = <2>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + qcom,pull-up-strength = <0>; + }; + }; + }; + }; + + phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + gadget@12500000 { + status = "okay"; + }; + + gsbi@1a200000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@1a240000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&gsbi5_uart_pin_a>; + }; + }; + + amba { + sdcc1: sdcc@12400000 { + status = "okay"; + + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdcc1_pin_a>; + }; + + sdcc3: sdcc@12180000 { + status = "okay"; + + vmmc-supply = <&pm8921_l6>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index a4c1762b5..ed521e85e 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -11,6 +11,17 @@ compatible = "qcom,apq8064"; interrupt-parent = <&intc>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_region: smem@80000000 { + reg = <0x80000000 0x200000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -80,6 +91,39 @@ interrupts = <1 10 0x304>; }; + clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + sfpb_mutex: hwmutex { + compatible = "qcom,sfpb-mutex"; + syscon = <&sfpb_wrapper_mutex 0x604 0x4>; + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_region>; + + hwlocks = <&sfpb_mutex 3>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -156,6 +200,11 @@ }; }; + sfpb_wrapper_mutex: syscon@1200000 { + compatible = "syscon"; + reg = <0x01200000 0x8000>; + }; + intc: interrupt-controller@2000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -291,6 +340,28 @@ }; }; + gsbi5: gsbi@1a200000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x1a200000 0x03>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi5_serial: serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x100>, + <0x1a200000 0x03>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + gsbi6: gsbi@16500000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -336,6 +407,13 @@ }; }; + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + qcom,ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; @@ -352,7 +430,8 @@ pm8921_gpio: gpio@150 { - compatible = "qcom,pm8921-gpio"; + compatible = "qcom,pm8921-gpio", + "qcom,ssbi-gpio"; reg = <0x150>; interrupts = <192 1>, <193 1>, <194 1>, <195 1>, <196 1>, <197 1>, @@ -376,7 +455,8 @@ }; pm8921_mpps: mpps@50 { - compatible = "qcom,pm8921-mpp"; + compatible = "qcom,pm8921-mpp", + "qcom,ssbi-mpp"; reg = <0x50>; gpio-controller; #gpio-cells = <2>; @@ -444,9 +524,55 @@ regulators { compatible = "qcom,rpm-pm8921-regulators"; + pm8921_s1: s1 {}; + pm8921_s2: s2 {}; + pm8921_s3: s3 {}; + pm8921_s4: s4 {}; + pm8921_s7: s7 {}; + pm8921_s8: s8 {}; + + pm8921_l1: l1 {}; + pm8921_l2: l2 {}; + pm8921_l3: l3 {}; + pm8921_l4: l4 {}; + pm8921_l5: l5 {}; + pm8921_l6: l6 {}; + pm8921_l7: l7 {}; + pm8921_l8: l8 {}; + pm8921_l9: l9 {}; + pm8921_l10: l10 {}; + pm8921_l11: l11 {}; + pm8921_l12: l12 {}; + pm8921_l14: l14 {}; + pm8921_l15: l15 {}; + pm8921_l16: l16 {}; + pm8921_l17: l17 {}; + pm8921_l18: l18 {}; + pm8921_l21: l21 {}; + pm8921_l22: l22 {}; + pm8921_l23: l23 {}; + pm8921_l24: l24 {}; + pm8921_l25: l25 {}; + pm8921_l26: l26 {}; + pm8921_l27: l27 {}; + pm8921_l28: l28 {}; + pm8921_l29: l29 {}; + + pm8921_lvs1: lvs1 {}; + pm8921_lvs2: lvs2 {}; + pm8921_lvs3: lvs3 {}; + pm8921_lvs4: lvs4 {}; + pm8921_lvs5: lvs5 {}; + pm8921_lvs6: lvs6 {}; + pm8921_lvs7: lvs7 {}; + + pm8921_usb_switch: usb-switch {}; + pm8921_hdmi_switch: hdmi-switch { bias-pull-down; }; + + pm8921_ncp: ncp {}; }; }; @@ -659,5 +785,41 @@ compatible = "qcom,tcsr-apq8064", "syscon"; reg = <0x1a400000 0x100>; }; + + pcie: pci@1b500000 { + compatible = "qcom,pcie-apq8064", "snps,dw-pcie"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ + 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ + interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_REF_CLK>; + clock-names = "core", "iface", "phy"; + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 835bdc71c..c0e205315 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -8,6 +8,8 @@ aliases { serial0 = &blsp1_uart2; + usid0 = &pm8941_0; + usid4 = &pm8841_0; }; chosen { diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts index c9c2b7695..2052b84a7 100644 --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -3,10 +3,11 @@ / { model = "Qualcomm APQ8084/IFC6540"; - compatible = "qcom,apq8084-ifc6540", "qcom,apq8084"; + compatible = "qcom,apq8084-sbc", "qcom,apq8084"; aliases { serial0 = &blsp2_uart2; + usid0 = &pma8084_0; }; chosen { diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts index 3016c7048..d174d15bc 100644 --- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -7,6 +7,7 @@ aliases { serial0 = &blsp2_uart2; + usid0 = &pma8084_0; }; chosen { diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index fcffecae3..08214cbae 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -10,6 +10,17 @@ compatible = "qcom,apq8084"; interrupt-parent = <&intc>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_mem: smem_region@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -89,6 +100,15 @@ clock-frequency = <19200000>; }; + smem { + compatible = "qcom,smem"; + + qcom,rpm-msg-ram = <&rpm_msg_ram>; + memory-region = <&smem_mem>; + + hwlocks = <&tcsr_mutex 3>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -103,6 +123,11 @@ <0xf9002000 0x1000>; }; + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -225,6 +250,22 @@ reg = <0xfc400000 0x4000>; }; + tcsr_mutex_regs: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x80>; + #hwlock-cells = <1>; + }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + tlmm: pinctrl@fd510000 { compatible = "qcom,apq8084-pinctrl"; reg = <0xfd510000 0x4000>; @@ -282,4 +323,71 @@ #interrupt-cells = <4>; }; }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <0 168 1>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-apq8084"; + qcom,smd-channels = "rpm_requests"; + + pma8084-regulators { + compatible = "qcom,rpm-pma8084-regulators"; + + pma8084_s1: s1 {}; + pma8084_s2: s2 {}; + pma8084_s3: s3 {}; + pma8084_s4: s4 {}; + pma8084_s5: s5 {}; + pma8084_s6: s6 {}; + pma8084_s7: s7 {}; + pma8084_s8: s8 {}; + pma8084_s9: s9 {}; + pma8084_s10: s10 {}; + pma8084_s11: s11 {}; + pma8084_s12: s12 {}; + + pma8084_l1: l1 {}; + pma8084_l2: l2 {}; + pma8084_l3: l3 {}; + pma8084_l4: l4 {}; + pma8084_l5: l5 {}; + pma8084_l6: l6 {}; + pma8084_l7: l7 {}; + pma8084_l8: l8 {}; + pma8084_l9: l9 {}; + pma8084_l10: l10 {}; + pma8084_l11: l11 {}; + pma8084_l12: l12 {}; + pma8084_l13: l13 {}; + pma8084_l14: l14 {}; + pma8084_l15: l15 {}; + pma8084_l16: l16 {}; + pma8084_l17: l17 {}; + pma8084_l18: l18 {}; + pma8084_l19: l19 {}; + pma8084_l20: l20 {}; + pma8084_l21: l21 {}; + pma8084_l22: l22 {}; + pma8084_l23: l23 {}; + pma8084_l24: l24 {}; + pma8084_l25: l25 {}; + pma8084_l26: l26 {}; + pma8084_l27: l27 {}; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 134cd91d6..51a40d841 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -49,6 +49,29 @@ qcom,no-pc-write; }; + clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "cxo_board"; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "pxo_board"; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "sleep_clk"; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 016f9ad93..a0398b69f 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -1,6 +1,9 @@ #include "qcom-msm8974.dtsi" #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "Sony Xperia Z1"; @@ -14,24 +17,403 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + memory@0 { reg = <0 0x40000000>, <0x40000000 0x40000000>; device_type = "memory"; }; + + smd { + rpm { + rpm_requests { + pm8841-regulators { + s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + vin_5vs-supply = <&pm8941_5v>; + + s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-boot-on; + regulator-system-load = <200000>; + }; + + l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + }; + }; + }; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; }; &soc { + sdhci@f9824900 { + status = "ok"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; + }; + + sdhci@f98a4900 { + status = "ok"; + + bus-width = <4>; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + }; + serial@f991e000 { status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_pin_a>; + }; + + pinctrl@fd510000 { + blsp1_uart2_pin_a: blsp1-uart2-pin-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; + + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + + drive-strength = <4>; + bias-disable; + }; + }; + + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc2_cd_pin_a: sdhc2-cd-pin-active { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + }; }; &spmi_bus { pm8941@0 { + charger@1000 { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; + }; + + gpios@c000 { + boost_bypass_n_pin: boost-bypass { + pins = "gpio21"; + function = "normal"; + }; + + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + }; + coincell@2800 { status = "ok"; qcom,rset-ohms = <2100>; qcom,vset-millivolts = <3000>; }; }; + + pm8941@1 { + wled@d800 { + status = "ok"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 753bdfddd..dfdafdcb8 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -319,6 +319,17 @@ interrupts = <0 208 0>; }; + blsp_i2c8: i2c@f9964000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9964000 0x1000>; + interrupts = <0 102 IRQ_TYPE_NONE>; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp_i2c11: i2c@f9967000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 8f1a0b162..9f357f687 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -3,14 +3,14 @@ &spmi_bus { - usid4: pm8841@4 { - compatible = "qcom,spmi-pmic"; + pm8841_0: pm8841@4 { + compatible = "qcom,pm8841", "qcom,spmi-pmic"; reg = <0x4 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pm8841_mpps: mpps@a000 { - compatible = "qcom,pm8841-mpp"; + compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp"; reg = <0xa000 0x400>; gpio-controller; #gpio-cells = <2>; @@ -27,8 +27,8 @@ }; }; - usid5: pm8841@5 { - compatible = "qcom,spmi-pmic"; + pm8841_1: pm8841@5 { + compatible = "qcom,pm8841", "qcom,spmi-pmic"; reg = <0x5 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index b0d443999..ca53a5947 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -4,8 +4,8 @@ &spmi_bus { - usid0: pm8941@0 { - compatible ="qcom,spmi-pmic"; + pm8941_0: pm8941@0 { + compatible = "qcom,pm8941", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; @@ -48,7 +48,7 @@ }; pm8941_gpios: gpios@c000 { - compatible = "qcom,pm8941-gpio"; + compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio"; reg = <0xc000 0x2400>; gpio-controller; #gpio-cells = <2>; @@ -91,7 +91,7 @@ }; pm8941_mpps: mpps@a000 { - compatible = "qcom,pm8941-mpp"; + compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp"; reg = <0xa000 0x800>; gpio-controller; #gpio-cells = <2>; @@ -153,23 +153,18 @@ }; }; - usid1: pm8941@1 { - compatible = "qcom,spmi-pmic"; + pm8941_1: pm8941@1 { + compatible = "qcom,pm8941", "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - wled@d800 { + pm8941_wled: wled@d800 { compatible = "qcom,pm8941-wled"; reg = <0xd800 0x100>; label = "backlight"; - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index 5e240ccc0..4e9bd3f88 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -4,8 +4,8 @@ &spmi_bus { - usid0: pma8084@0 { - compatible = "qcom,spmi-pmic"; + pma8084_0: pma8084@0 { + compatible = "qcom,pma8084", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; @@ -19,7 +19,7 @@ }; pma8084_gpios: gpios@c000 { - compatible = "qcom,pma8084-gpio"; + compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio"; reg = <0xc000 0x1600>; gpio-controller; #gpio-cells = <2>; @@ -48,7 +48,7 @@ }; pma8084_mpps: mpps@a000 { - compatible = "qcom,pma8084-mpp"; + compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp"; reg = <0xa000 0x800>; gpio-controller; #gpio-cells = <2>; @@ -101,8 +101,8 @@ }; }; - usid1: pma8084@1 { - compatible = "qcom,spmi-pmic"; + pma8084_1: pma8084@1 { + compatible = "qcom,pma8084", "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 060c32cbd..4657d7fb5 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -329,7 +329,7 @@ }; gic: interrupt-controller@e8201000 { - compatible = "arm,cortex-a9-gic"; + compatible = "arm,pl390"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index a4c425923..590257095 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -23,7 +23,7 @@ chosen { bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw"; - stdout-path = &scifa0; + stdout-path = "serial0:115200n8"; }; memory@40000000 { @@ -110,7 +110,7 @@ gpios = <&pfc 324 GPIO_ACTIVE_LOW>; linux,code = <KEY_0>; label = "S16"; - gpio-key,wakeup; + wakeup-source; }; menu-key { diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 105d9c95d..c548cabb1 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -85,7 +85,7 @@ gpios = <&pfc 99 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "SW3"; - gpio-key,wakeup; + wakeup-source; }; back-key { @@ -180,7 +180,7 @@ }; &extal1_clk { - clock-frequency = <25000000>; + clock-frequency = <24000000>; }; &extal2_clk { clock-frequency = <48000000>; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index e14cb1438..6ef954766 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -26,17 +26,30 @@ reg = <0x0>; clock-frequency = <800000000>; power-domains = <&pd_a3sm>; + next-level-cache = <&L2>; }; }; gic: interrupt-controller@c2800000 { - compatible = "arm,cortex-a9-gic"; + compatible = "arm,pl390"; #interrupt-cells = <3>; interrupt-controller; reg = <0xc2800000 0x1000>, <0xc2000000 0x1000>; }; + L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xf0100000 0x1000>; + interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_a3sm>; + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + arm,shared-override; + cache-unified; + cache-level = <2>; + }; + dbsc3: memory-controller@fe400000 { compatible = "renesas,dbsc3-r8a7740"; reg = <0xfe400000 0x400>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 90543b12d..a52b359e2 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -28,8 +28,8 @@ }; chosen { - bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw"; - stdout-path = &scif0; + bootargs = "ignore_loglevel ip=dhcp root=/dev/nfs rw"; + stdout-path = "serial0:115200n8"; }; memory { @@ -137,10 +137,14 @@ }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", - "sdhi0_cd"; + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; renesas,function = "sdhi0"; }; + sdhi0_pup_pins: sd0_pup { + renesas,groups = "sdhi0_cd", "sdhi0_wp"; + renesas,function = "sdhi0"; + bias-pull-up; + }; hspi0_pins: hspi0 { renesas,groups = "hspi0_a"; @@ -168,8 +172,13 @@ }; }; +&rcar_sound { + /* Single DAI */ + #sound-dai-cells = <0>; +}; + &sdhi0 { - pinctrl-0 = <&sdhi0_pins>; + pinctrl-0 = <&sdhi0_pins>, <&sdhi0_pup_pins>; pinctrl-names = "default"; vmmc-supply = <&fixedregulator3v3>; @@ -184,16 +193,20 @@ status = "okay"; flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "spansion,s25fl008k", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; m25p,fast-read; - partition@0 { - label = "data(spi)"; - reg = <0x00000000 0x00100000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "data(spi)"; + reg = <0x00000000 0x00100000>; + }; }; }; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 4f8e07811..791aafd31 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -61,7 +61,7 @@ }; gic: interrupt-controller@fe438000 { - compatible = "arm,cortex-a9-gic"; + compatible = "arm,pl390"; #interrupt-cells = <3>; interrupt-controller; reg = <0xfe438000 0x1000>, @@ -236,7 +236,12 @@ }; rcar_sound: sound@ffd90000 { - #sound-dai-cells = <1>; + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1"; reg = <0xffd90000 0x1000>, /* SRU */ <0xffd91000 0x240>, /* SSI */ diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index c553abd71..052dcee47 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -47,13 +47,13 @@ compatible = "renesas,lager", "renesas,r8a7790"; aliases { - serial0 = &scifa0; + serial0 = &scif0; serial1 = &scifa1; }; chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = &scifa0; + stdout-path = "serial0:115200n8"; }; memory@40000000 { @@ -77,28 +77,28 @@ button@1 { linux,code = <KEY_1>; label = "SW2-1"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; button@2 { linux,code = <KEY_2>; label = "SW2-2"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; button@3 { linux,code = <KEY_3>; label = "SW2-3"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; }; button@4 { linux,code = <KEY_4>; label = "SW2-4"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; }; @@ -296,9 +296,9 @@ renesas,function = "du"; }; - scifa0_pins: serial0 { - renesas,groups = "scifa0_data"; - renesas,function = "scifa0"; + scif0_pins: serial0 { + renesas,groups = "scif0_data"; + renesas,function = "scif0"; }; ether_pins: ether { @@ -439,8 +439,6 @@ status = "okay"; flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "spansion,s25fl512s", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; @@ -450,25 +448,31 @@ spi-cpol; m25p,fast-read; - partition@0 { - label = "loader"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "user"; - reg = <0x00040000 0x00400000>; - read-only; - }; - partition@440000 { - label = "flash"; - reg = <0x00440000 0x03bc0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash"; + reg = <0x00440000 0x03bc0000>; + }; }; }; }; -&scifa0 { - pinctrl-0 = <&scifa0_pins>; +&scif0 { + pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e07ae5d45..7dfd393bf 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -143,7 +143,7 @@ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; - gpio-ranges = <&pfc 0 32 32>; + gpio-ranges = <&pfc 0 32 30>; #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; @@ -156,7 +156,7 @@ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; - gpio-ranges = <&pfc 0 64 32>; + gpio-ranges = <&pfc 0 64 30>; #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; @@ -266,7 +266,7 @@ }; dmac0: dma-controller@e6700000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH 0 200 IRQ_TYPE_LEVEL_HIGH @@ -297,7 +297,7 @@ }; dmac1: dma-controller@e6720000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH 0 216 IRQ_TYPE_LEVEL_HIGH @@ -328,7 +328,7 @@ }; audma0: dma-controller@ec700000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH 0 320 IRQ_TYPE_LEVEL_HIGH @@ -357,7 +357,7 @@ }; audma1: dma-controller@ec720000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH 0 333 IRQ_TYPE_LEVEL_HIGH @@ -386,7 +386,7 @@ }; usb_dmac0: dma-controller@e65a0000 { - compatible = "renesas,usb-dmac"; + compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH 0 109 IRQ_TYPE_LEVEL_HIGH>; @@ -398,7 +398,7 @@ }; usb_dmac1: dma-controller@e65b0000 { - compatible = "renesas,usb-dmac"; + compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH 0 110 IRQ_TYPE_LEVEL_HIGH>; @@ -417,6 +417,7 @@ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C0>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -428,6 +429,7 @@ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C1>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -439,6 +441,7 @@ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C2>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -450,6 +453,7 @@ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C3>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -1766,7 +1770,7 @@ }; ipmmu_sy0: mmu@e6280000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, <0 224 IRQ_TYPE_LEVEL_HIGH>; @@ -1775,7 +1779,7 @@ }; ipmmu_sy1: mmu@e6290000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; @@ -1783,7 +1787,7 @@ }; ipmmu_ds: mmu@e6740000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, <0 199 IRQ_TYPE_LEVEL_HIGH>; @@ -1792,7 +1796,7 @@ }; ipmmu_mp: mmu@ec680000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; @@ -1800,7 +1804,7 @@ }; ipmmu_mx: mmu@fe951000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>; @@ -1809,7 +1813,7 @@ }; ipmmu_rt: mmu@ffc80000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts deleted file mode 100644 index 655d1804e..000000000 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ /dev/null @@ -1,320 +0,0 @@ -/* - * Device Tree Source for the Henninger board - * - * Copyright (C) 2014 Renesas Solutions Corp. - * Copyright (C) 2014 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a7791.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Henninger"; - compatible = "renesas,henninger", "renesas,r8a7791"; - - aliases { - serial0 = &scif0; - }; - - chosen { - bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = &scif0; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0 0x40000000 0 0x40000000>; - }; - - memory@200000000 { - device_type = "memory"; - reg = <2 0x00000000 0 0x40000000>; - }; - - vcc_sdhi0: regulator@0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vccq_sdhi0: regulator@1 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; - - vcc_sdhi2: regulator@2 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI2 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vccq_sdhi2: regulator@3 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI2 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; -}; - -&extal_clk { - clock-frequency = <20000000>; -}; - -&pfc { - scif0_pins: serial0 { - renesas,groups = "scif0_data_d"; - renesas,function = "scif0"; - }; - - ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; - }; - - phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; - }; - - sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; - }; - - i2c2_pins: i2c2 { - renesas,groups = "i2c2"; - renesas,function = "i2c2"; - }; - - qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; - }; - - msiof0_pins: spi1 { - renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", - "msiof0_tx"; - renesas,function = "msiof0"; - }; - - usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; - }; - - usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; - }; - - vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; - }; - - can0_pins: can0 { - renesas,groups = "can0_data"; - renesas,function = "can0"; - }; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -ðer { - pinctrl-0 = <ðer_pins &phy1_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy1>; - renesas,ether-link-active-low; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - micrel,led-mode = <1>; - }; -}; - -&sata0 { - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&sdhi2 { - pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vcc_sdhi2>; - vqmmc-supply = <&vccq_sdhi2>; - cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - composite-in@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - remote = <&vin0>; - - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin0ep>; - }; - }; - }; -}; - -&qspi { - pinctrl-0 = <&qspi_pins>; - pinctrl-names = "default"; - - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25fl512s", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <30000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - m25p,fast-read; - - partition@0 { - label = "loader_prg"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "user_prg"; - reg = <0x00040000 0x00400000>; - read-only; - }; - partition@440000 { - label = "flash_fs"; - reg = <0x00440000 0x03bc0000>; - }; - }; -}; - -&msiof0 { - pinctrl-0 = <&msiof0_pins>; - pinctrl-names = "default"; - - status = "okay"; - - pmic@0 { - compatible = "renesas,r2a11302ft"; - reg = <0>; - spi-max-frequency = <6000000>; - spi-cpol; - spi-cpha; - }; -}; - -&pci0 { - status = "okay"; - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; -}; - -&pci1 { - status = "okay"; - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; -}; - -&hsusb { - status = "okay"; - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; -}; - -&usbphy { - status = "okay"; -}; - -&pcie_bus_clk { - status = "okay"; -}; - -&pciec { - status = "okay"; -}; - -/* composite video input */ -&vin0 { - status = "okay"; - pinctrl-0 = <&vin0_pins>; - pinctrl-names = "default"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - vin0ep: endpoint { - remote-endpoint = <&adv7180>; - bus-width = <8>; - }; - }; -}; - -&can0 { - pinctrl-0 = <&can0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index fc44ea361..45256f3cc 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -54,7 +54,7 @@ chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = &scif0; + stdout-path = "serial0:115200n8"; }; memory@40000000 { @@ -79,77 +79,77 @@ gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_1>; label = "SW2-1"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-2 { gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_2>; label = "SW2-2"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-3 { gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_3>; label = "SW2-3"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-4 { gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_4>; label = "SW2-4"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-a { gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_A>; label = "SW30"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-b { gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_B>; label = "SW31"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-c { gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_C>; label = "SW32"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-d { gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_D>; label = "SW33"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-e { gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_E>; label = "SW34"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-f { gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_F>; label = "SW35"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-g { gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_G>; label = "SW36"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; }; @@ -326,7 +326,7 @@ }; du_pins: du { - renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0"; + renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; renesas,function = "du"; }; @@ -479,8 +479,6 @@ status = "okay"; flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "spansion,s25fl512s", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; @@ -490,19 +488,25 @@ spi-cpol; m25p,fast-read; - partition@0 { - label = "loader"; - reg = <0x00000000 0x00080000>; - read-only; - }; - partition@80000 { - label = "user"; - reg = <0x00080000 0x00580000>; - read-only; - }; - partition@600000 { - label = "flash"; - reg = <0x00600000 0x03a00000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00080000>; + read-only; + }; + partition@80000 { + label = "user"; + reg = <0x00080000 0x00580000>; + read-only; + }; + partition@600000 { + label = "flash"; + reg = <0x00600000 0x03a00000>; + }; }; }; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index fe0f12fc0..01d239c3e 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -22,7 +22,7 @@ chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = &scif0; + stdout-path = "serial0:115200n8"; }; memory@40000000 { @@ -134,6 +134,11 @@ renesas,groups = "vin0_data8", "vin0_clk"; renesas,function = "vin0"; }; + + can0_pins: can0 { + renesas,groups = "can0_data"; + renesas,function = "can0"; + }; }; &scif0 { @@ -187,8 +192,6 @@ status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "spansion,s25fl512s", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; @@ -196,19 +199,25 @@ spi-rx-bus-width = <4>; m25p,fast-read; - partition@0 { - label = "loader_prg"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "user_prg"; - reg = <0x00040000 0x00400000>; - read-only; - }; - partition@440000 { - label = "flash_fs"; - reg = <0x00440000 0x03bc0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "loader_prg"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user_prg"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash_fs"; + reg = <0x00440000 0x03bc0000>; + }; }; }; }; @@ -269,6 +278,13 @@ status = "okay"; }; +&hsusb { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &usbphy { status = "okay"; }; @@ -280,3 +296,10 @@ &pciec { status = "okay"; }; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 328f48bd1..2a369ddcb 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -100,7 +100,7 @@ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; - gpio-ranges = <&pfc 0 32 32>; + gpio-ranges = <&pfc 0 32 26>; #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO1>; @@ -255,7 +255,7 @@ }; dmac0: dma-controller@e6700000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH 0 200 IRQ_TYPE_LEVEL_HIGH @@ -286,7 +286,7 @@ }; dmac1: dma-controller@e6720000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH 0 216 IRQ_TYPE_LEVEL_HIGH @@ -317,7 +317,7 @@ }; audma0: dma-controller@ec700000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH 0 320 IRQ_TYPE_LEVEL_HIGH @@ -346,7 +346,7 @@ }; audma1: dma-controller@ec720000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH 0 333 IRQ_TYPE_LEVEL_HIGH @@ -375,7 +375,7 @@ }; usb_dmac0: dma-controller@e65a0000 { - compatible = "renesas,usb-dmac"; + compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH 0 109 IRQ_TYPE_LEVEL_HIGH>; @@ -387,7 +387,7 @@ }; usb_dmac1: dma-controller@e65b0000 { - compatible = "renesas,usb-dmac"; + compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH 0 110 IRQ_TYPE_LEVEL_HIGH>; @@ -407,6 +407,7 @@ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C0>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -418,6 +419,7 @@ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C1>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -429,6 +431,7 @@ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C2>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -440,6 +443,7 @@ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C3>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -451,6 +455,7 @@ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C4>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -463,6 +468,7 @@ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C5>; power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -509,7 +515,6 @@ pfc: pfc@e6060000 { compatible = "renesas,pfc-r8a7791"; reg = <0 0xe6060000 0 0x250>; - #gpio-range-cells = <3>; }; mmcif0: mmc@ee200000 { @@ -786,6 +791,18 @@ status = "disabled"; }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7791", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sata0: sata@ee300000 { compatible = "renesas,sata-r8a7791"; reg = <0 0xee300000 0 0x2000>; @@ -1163,14 +1180,6 @@ clock-mult = <1>; clock-output-names = "m2"; }; - imp_clk: imp_clk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clock-output-names = "imp"; - }; rclk_clk: rclk_clk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; @@ -1338,16 +1347,18 @@ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; clocks = <&zx_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>, - <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>; + <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>, + <&zs_clk>; #clock-cells = <1>; clock-indices = < R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0 - R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0 + R8A7791_CLK_ETHERAVB R8A7791_CLK_ETHER + R8A7791_CLK_SATA1 R8A7791_CLK_SATA0 >; clock-output-names = - "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", "ether", - "sata1", "sata0"; + "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", + "etheravb", "ether", "sata1", "sata0"; }; mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1579,7 +1590,7 @@ }; ipmmu_sy0: mmu@e6280000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, <0 224 IRQ_TYPE_LEVEL_HIGH>; @@ -1588,7 +1599,7 @@ }; ipmmu_sy1: mmu@e6290000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; @@ -1596,7 +1607,7 @@ }; ipmmu_ds: mmu@e6740000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, <0 199 IRQ_TYPE_LEVEL_HIGH>; @@ -1605,7 +1616,7 @@ }; ipmmu_mp: mmu@ec680000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; @@ -1613,7 +1624,7 @@ }; ipmmu_mx: mmu@fe951000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>; @@ -1622,7 +1633,7 @@ }; ipmmu_rt: mmu@ffc80000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; @@ -1630,7 +1641,7 @@ }; ipmmu_gp: mmu@e62a0000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, <0 261 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 96443ec5f..baa59fe84 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -24,7 +24,7 @@ chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = &scif0; + stdout-path = "serial0:115200n8"; }; memory@40000000 { @@ -37,7 +37,37 @@ clock-frequency = <20000000>; }; +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data_d"; + renesas,function = "scif1"; + }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; + + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; +}; + ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; renesas,ether-link-active-low; status = "okay"; @@ -55,9 +85,54 @@ }; &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; &scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + status = "okay"; }; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash"; + reg = <0x00440000 0x03bc0000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index c4654047e..aef9e69d6 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -18,6 +18,10 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + spi0 = &qspi; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -53,6 +57,118 @@ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7793_CLK_GPIO0>; + power-domains = <&cpg_clocks>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7793_CLK_GPIO1>; + power-domains = <&cpg_clocks>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7793_CLK_GPIO2>; + power-domains = <&cpg_clocks>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7793_CLK_GPIO3>; + power-domains = <&cpg_clocks>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7793_CLK_GPIO4>; + power-domains = <&cpg_clocks>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7793_CLK_GPIO5>; + power-domains = <&cpg_clocks>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7793_CLK_GPIO6>; + power-domains = <&cpg_clocks>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7793_CLK_GPIO7>; + power-domains = <&cpg_clocks>; + }; + + thermal@e61f0000 { + compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks R8A7793_CLK_THERMAL>; + power-domains = <&cpg_clocks>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, @@ -114,12 +230,189 @@ power-domains = <&cpg_clocks>; }; + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a7793"; + reg = <0 0xe6060000 0 0x250>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + reg = <0 0xe6c40000 0 64>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + reg = <0 0xe6c50000 0 64>; + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + reg = <0 0xe6c60000 0 64>; + interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + reg = <0 0xe6c70000 0 64>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + reg = <0 0xe6c78000 0 64>; + interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + reg = <0 0xe6c80000 0 64>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + reg = <0 0xe6c20000 0 64>; + interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + reg = <0 0xe6c30000 0 64>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + reg = <0 0xe6ce0000 0 64>; + interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a7793", "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_SCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>; + dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -130,6 +423,92 @@ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_SCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7793", "renesas,scif"; + reg = <0 0xe6e58000 0 64>; + interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF2>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7793", "renesas,scif"; + reg = <0 0xe6ea8000 0 64>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF3>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7793", "renesas,scif"; + reg = <0 0xe6ee0000 0 64>; + interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF4>; + clock-names = "sci_ick"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7793", "renesas,scif"; + reg = <0 0xe6ee8000 0 64>; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF5>; + clock-names = "sci_ick"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + reg = <0 0xe62c0000 0 96>; + interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + reg = <0 0xe62c8000 0 96>; + interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + reg = <0 0xe62d0000 0 96>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; + dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -146,6 +525,50 @@ status = "disabled"; }; + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7793", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7793"; + reg = <0 0xfeb00000 0 0x40000>, + <0 0xfeb90000 0 0x1c>; + reg-names = "du", "lvds.0"; + interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, + <0 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_DU0>, + <&mstp7_clks R8A7793_CLK_DU1>, + <&mstp7_clks R8A7793_CLK_LVDS0>; + clock-names = "du.0", "du.1", "lvds.0"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -299,6 +722,21 @@ "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", "vsp1-du0", "vsps"; }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7793_CLK_SCIFA2 R8A7793_CLK_SCIFA1 R8A7793_CLK_SCIFA0 + R8A7793_CLK_SCIFB0 R8A7793_CLK_SCIFB1 R8A7793_CLK_SCIFB2 + R8A7793_CLK_SYS_DMAC1 R8A7793_CLK_SYS_DMAC0 + >; + clock-output-names = + "scifa2", "scifa1", "scifa0", "scifb0", + "scifb1", "scifb2", "sys-dmac1", "sys-dmac0"; + }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -329,6 +767,14 @@ clock-indices = <R8A7793_CLK_IRQC>; clock-output-names = "irqc"; }; + mstp5_clks: mstp5_clks@e6150144 { + compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-indices = <R8A7793_CLK_THERMAL>; + clock-output-names = "thermal"; + }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -369,6 +815,94 @@ "ipmmu_sgx", "vin2", "vin1", "vin0", "ether", "sata1", "sata0"; }; + mstp9_clks: mstp9_clks@e6150994 { + compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cpg_clocks R8A7793_CLK_QSPI>; + #clock-cells = <1>; + clock-indices = < + R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6 + R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4 + R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2 + R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0 + R8A7793_CLK_QSPI_MOD + >; + clock-output-names = + "gpio7", "gpio6", "gpio5", "gpio4", + "gpio3", "gpio2", "gpio1", "gpio0", + "qspi_mod"; + }; + mstp11_clks: mstp11_clks@e615099c { + compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7793_CLK_SCIFA3 R8A7793_CLK_SCIFA4 R8A7793_CLK_SCIFA5 + >; + clock-output-names = "scifa3", "scifa4", "scifa5"; + }; + }; + + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, + <0 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; + reg = <0 0xffc80000 0 0x1000>; + interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; }; + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, + <0 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 928cfa641..2394e4883 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -21,7 +21,7 @@ chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = &scif2; + stdout-path = "serial0:115200n8"; }; memory@40000000 { @@ -33,17 +33,115 @@ #address-cells = <1>; #size-cells = <1>; }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x13_clk: x13-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&mstp7_clks R8A7794_CLK_DU0>, + <&mstp7_clks R8A7794_CLK_DU0>, + <&x13_clk>, <&x2_clk>; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; + + ports { + port@1 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; }; &extal_clk { clock-frequency = <20000000>; }; +&pfc { + du_pins: du { + renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; + renesas,function = "du"; + }; + + scif2_pins: serial2 { + renesas,groups = "scif2_data"; + renesas,function = "scif2"; + }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq8"; + renesas,function = "intc"; + }; + + i2c1_pins: i2c1 { + renesas,groups = "i2c1"; + renesas,function = "i2c1"; + }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; +}; + &cmt0 { status = "okay"; }; ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; renesas,ether-link-active-low; status = "okay"; @@ -56,6 +154,46 @@ }; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; +}; + +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; + &scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 48ff3e295..5153e3af2 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -12,6 +12,7 @@ /dts-v1/; #include "r8a7794.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "SILK"; @@ -23,7 +24,7 @@ chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = &scif2; + stdout-path = "serial0:115200n8"; }; memory@40000000 { @@ -39,6 +40,30 @@ regulator-boot-on; regulator-always-on; }; + + vcc_sdhi1: regulator@3 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi1: regulator@4 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; }; &extal_clk { @@ -71,6 +96,11 @@ renesas,function = "mmc"; }; + sdhi1_pins: sd1 { + renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; + renesas,function = "sdhi1"; + }; + qspi_pins: spi0 { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; @@ -147,6 +177,16 @@ status = "okay"; }; +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -154,8 +194,6 @@ status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "spansion,s25fl512s", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; @@ -165,19 +203,25 @@ spi-cpha; m25p,fast-read; - partition@0 { - label = "loader"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "user"; - reg = <0x00040000 0x00400000>; - read-only; - }; - partition@440000 { - label = "flash"; - reg = <0x00440000 0x03bc0000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash"; + reg = <0x00440000 0x03bc0000>; + }; }; }; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index a9977d6ee..6c78f1fae 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -217,11 +217,10 @@ pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a7794"; reg = <0 0xe6060000 0 0x11c>; - #gpio-range-cells = <3>; }; dmac0: dma-controller@e6700000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH 0 200 IRQ_TYPE_LEVEL_HIGH @@ -252,7 +251,7 @@ }; dmac1: dma-controller@e6720000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH 0 216 IRQ_TYPE_LEVEL_HIGH @@ -519,6 +518,7 @@ power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -530,6 +530,7 @@ power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -541,6 +542,7 @@ power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -552,6 +554,7 @@ power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -563,6 +566,7 @@ power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -574,6 +578,7 @@ power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -750,6 +755,34 @@ }; }; + du: display@feb00000 { + compatible = "renesas,du-r8a7794"; + reg = <0 0xfeb00000 0 0x40000>; + reg-names = "du"; + interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, + <0 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_DU0>, + <&mstp7_clks R8A7794_CLK_DU0>; + clock-names = "du.0", "du.1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb0: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_rgb1: endpoint { + }; + }; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -879,14 +912,6 @@ clock-mult = <1>; clock-output-names = "m2"; }; - imp_clk: imp_clk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clock-output-names = "imp"; - }; rclk_clk: rclk_clk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; @@ -1025,19 +1050,20 @@ reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, - <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; + <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&zx_clk>; #clock-cells = <1>; clock-indices = < R8A7794_CLK_EHCI R8A7794_CLK_HSUSB R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5 R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0 R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1 - R8A7794_CLK_SCIF0 + R8A7794_CLK_SCIF0 R8A7794_CLK_DU0 >; clock-output-names = "ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", - "scif3", "scif2", "scif1", "scif0"; + "scif3", "scif2", "scif1", "scif0", "du0"; }; mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1083,7 +1109,7 @@ }; ipmmu_sy0: mmu@e6280000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, <0 224 IRQ_TYPE_LEVEL_HIGH>; @@ -1092,7 +1118,7 @@ }; ipmmu_sy1: mmu@e6290000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; @@ -1100,15 +1126,16 @@ }; ipmmu_ds: mmu@e6740000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, <0 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; + status = "disabled"; }; ipmmu_mp: mmu@ec680000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; @@ -1116,15 +1143,16 @@ }; ipmmu_mx: mmu@fe951000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; + status = "disabled"; }; ipmmu_gp: mmu@e62a0000 { - compatible = "renesas,ipmmu-vmsa"; + compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, <0 261 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts new file mode 100644 index 000000000..28a033666 --- /dev/null +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -0,0 +1,64 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk3036.dtsi" + +/ { + model = "Rockchip RK3036 Evaluation board"; + compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; +}; + +&i2c1 { + status = "okay"; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts new file mode 100644 index 000000000..992f9cadb --- /dev/null +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -0,0 +1,300 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk3036.dtsi" + +/ { + model = "Rockchip RK3036 KylinBoard"; + compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&acodec { + status = "okay"; +}; + +&emmc { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_arm"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vout5: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vout5"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_codec"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&sdio { + status = "okay"; + + broken-cd; + bus-width = <4>; + cap-sdio-irq; + default-sample-phase = <90>; + keep-power-in-suspend; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int: pmic-int { + rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + sleep { + global_pwroff: global-pwroff { + rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi new file mode 100644 index 000000000..b9567c1e0 --- /dev/null +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -0,0 +1,622 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/clock/rk3036-cru.h> +#include "skeleton.dtsi" + +/ { + compatible = "rockchip,rk3036"; + + interrupt-parent = <&gic>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + mshc0 = &emmc; + mshc1 = &sdmmc; + mshc2 = &sdio; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "rockchip,rk3036-smp"; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + resets = <&cru SRST_CORE0>; + operating-points = < + /* KHz uV */ + 816000 1000000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; + }; + + cpu1: cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + resets = <&cru SRST_CORE1>; + }; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + timer { + compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <24000000>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + bus_intmem@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x2000>; + + smp-sram@0 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x00 0x10>; + }; + }; + + gic: interrupt-controller@10139000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x10139000 0x1000>, + <0x1013a000 0x1000>, + <0x1013c000 0x2000>, + <0x1013e000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + usb_otg: usb@10180000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x10180000 0x40000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <275>; + g-tx-fifo-size = <256 128 128 64 64 32>; + g-use-dma; + status = "disabled"; + }; + + usb_host: usb@101c0000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x101c0000 0x40000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG1>; + clock-names = "otg"; + dr_mode = "host"; + status = "disabled"; + }; + + sdmmc: dwmmc@10214000 { + compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x10214000 0x4000>; + clock-frequency = <37500000>; + clock-freq-min-max = <400000 37500000>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdio: dwmmc@10218000 { + compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x10218000 0x4000>; + clock-freq-min-max = <400000 37500000>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + emmc: dwmmc@1021c000 { + compatible = "rockchip,rk3288-dw-mshc"; + reg = <0x1021c000 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + clock-frequency = <37500000>; + clock-freq-min-max = <400000 37500000>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + default-sample-phase = <158>; + disable-wp; + dmas = <&pdma 12>; + dma-names = "rx-tx"; + fifo-depth = <0x100>; + mmc-ddr-1_8v; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "disabled"; + }; + + i2s: i2s@10220000 { + compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s"; + reg = <0x10220000 0x4000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>; + dmas = <&pdma 0>, <&pdma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_bus>; + status = "disabled"; + }; + + cru: clock-controller@20000000 { + compatible = "rockchip,rk3036-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = <&cru PLL_GPLL>; + assigned-clock-rates = <594000000>; + }; + + grf: syscon@20008000 { + compatible = "rockchip,rk3036-grf", "syscon"; + reg = <0x20008000 0x1000>; + }; + + acodec: acodec-ana@20030000 { + compatible = "rk3036-codec"; + reg = <0x20030000 0x4000>; + rockchip,grf = <&grf>; + clock-names = "acodec_pclk"; + clocks = <&cru PCLK_ACODEC>; + status = "disabled"; + }; + + timer: timer@20044000 { + compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer"; + reg = <0x20044000 0x20>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>, <&cru PCLK_TIMER>; + clock-names = "timer", "pclk"; + }; + + pwm0: pwm@20050000 { + compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; + reg = <0x20050000 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "disabled"; + }; + + pwm1: pwm@20050010 { + compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; + reg = <0x20050010 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + status = "disabled"; + }; + + pwm2: pwm@20050020 { + compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; + reg = <0x20050020 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + status = "disabled"; + }; + + pwm3: pwm@20050030 { + compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; + reg = <0x20050030 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + status = "disabled"; + }; + + i2c1: i2c@20056000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0x20056000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + status = "disabled"; + }; + + i2c2: i2c@2005a000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0x2005a000 0x1000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + status = "disabled"; + }; + + uart0: serial@20060000 { + compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; + reg = <0x20060000 0x100>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + uart1: serial@20064000 { + compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; + reg = <0x20064000 0x100>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "disabled"; + }; + + uart2: serial@20068000 { + compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; + reg = <0x20068000 0x100>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + status = "disabled"; + }; + + i2c0: i2c@20072000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0x20072000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + status = "disabled"; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3036-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@2007c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2007c000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@20084000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20084000 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_default: pcfg_pull_default { + bias-pull-pin-default; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <0 1 2 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <0 27 1 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>; + }; + + sdmmc_cd: sdmcc-cd { + rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>, + <1 19 RK_FUNC_1 &pcfg_pull_default>, + <1 20 RK_FUNC_1 &pcfg_pull_default>, + <1 21 RK_FUNC_1 &pcfg_pull_default>; + }; + }; + + sdio { + sdio_bus1: sdio-bus1 { + rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>, + <0 12 RK_FUNC_1 &pcfg_pull_default>, + <0 13 RK_FUNC_1 &pcfg_pull_default>, + <0 14 RK_FUNC_1 &pcfg_pull_default>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>; + }; + + sdio_clk: sdio-clk { + rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + emmc { + /* + * We run eMMC at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + emmc_clk: emmc-clk { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>, + <1 25 RK_FUNC_2 &pcfg_pull_default>, + <1 26 RK_FUNC_2 &pcfg_pull_default>, + <1 27 RK_FUNC_2 &pcfg_pull_default>, + <1 28 RK_FUNC_2 &pcfg_pull_default>, + <1 29 RK_FUNC_2 &pcfg_pull_default>, + <1 30 RK_FUNC_2 &pcfg_pull_default>, + <1 31 RK_FUNC_2 &pcfg_pull_default>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, + <0 1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, + <0 3 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>, + <2 21 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2s { + i2s_bus: i2s-bus { + rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>, + <1 1 RK_FUNC_1 &pcfg_pull_none>, + <1 2 RK_FUNC_1 &pcfg_pull_none>, + <1 3 RK_FUNC_1 &pcfg_pull_none>, + <1 4 RK_FUNC_1 &pcfg_pull_none>, + <1 5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>, + <0 17 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>, + <2 23 RK_FUNC_1 &pcfg_pull_none>; + }; + /* no rts / cts for uart1 */ + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>, + <1 19 RK_FUNC_2 &pcfg_pull_none>; + }; + /* no rts / cts for uart2 */ + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 946f18705..58bac5053 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -103,6 +103,8 @@ dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + rockchip,playback-channels = <8>; + rockchip,capture-channels = <2>; status = "disabled"; }; @@ -118,6 +120,8 @@ dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; status = "disabled"; }; @@ -133,6 +137,8 @@ dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; status = "disabled"; }; @@ -153,6 +159,19 @@ clock-names = "timer", "pclk"; }; + efuse: efuse@20010000 { + compatible = "rockchip,rockchip-efuse"; + reg = <0x20010000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru PCLK_EFUSE>; + clock-names = "pclk_efuse"; + + cpu_leakage: cpu_leakage { + reg = <0x17 0x1>; + }; + }; + timer@20038000 { compatible = "snps,dw-apb-timer-osc"; reg = <0x20038000 0x100>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 6399942f1..348d46b7a 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -118,6 +118,8 @@ dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; status = "disabled"; }; @@ -144,6 +146,19 @@ #reset-cells = <1>; }; + efuse: efuse@20010000 { + compatible = "rockchip,rockchip-efuse"; + reg = <0x20010000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru PCLK_EFUSE>; + clock-names = "pclk_efuse"; + + cpu_leakage: cpu_leakage { + reg = <0x17 0x1>; + }; + }; + usbphy: phy { compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy"; rockchip,grf = <&grf>; diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts new file mode 100644 index 000000000..e3898b810 --- /dev/null +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -0,0 +1,66 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk3228.dtsi" + +/ { + model = "Rockchip RK3228 Evaluation board"; + compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; +}; + +&emmc { + broken-cd; + cap-mmc-highspeed; + mmc-ddr-1_8v; + disable-wp; + non-removable; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi new file mode 100644 index 000000000..119ff12ab --- /dev/null +++ b/arch/arm/boot/dts/rk3228.dtsi @@ -0,0 +1,442 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/clock/rk3228-cru.h> +#include "skeleton.dtsi" + +/ { + compatible = "rockchip,rk3228"; + + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + resets = <&cru SRST_CORE0>; + operating-points = < + /* KHz uV */ + 816000 1000000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; + }; + + cpu1: cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + resets = <&cru SRST_CORE1>; + }; + + cpu2: cpu@f02 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + resets = <&cru SRST_CORE2>; + }; + + cpu3: cpu@f03 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf03>; + resets = <&cru SRST_CORE3>; + }; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@110f0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x110f0000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <24000000>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + grf: syscon@11000000 { + compatible = "syscon"; + reg = <0x11000000 0x1000>; + }; + + uart0: serial@11010000 { + compatible = "snps,dw-apb-uart"; + reg = <0x11010000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@11020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x11020000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@11030000 { + compatible = "snps,dw-apb-uart"; + reg = <0x11030000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + pwm0: pwm@110b0000 { + compatible = "rockchip,rk3288-pwm"; + reg = <0x110b0000 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "disabled"; + }; + + pwm1: pwm@110b0010 { + compatible = "rockchip,rk3288-pwm"; + reg = <0x110b0010 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + status = "disabled"; + }; + + pwm2: pwm@110b0020 { + compatible = "rockchip,rk3288-pwm"; + reg = <0x110b0020 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + status = "disabled"; + }; + + pwm3: pwm@110b0030 { + compatible = "rockchip,rk3288-pwm"; + reg = <0x110b0030 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + status = "disabled"; + }; + + timer: timer@110c0000 { + compatible = "rockchip,rk3288-timer"; + reg = <0x110c0000 0x20>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>, <&cru PCLK_TIMER>; + clock-names = "timer", "pclk"; + }; + + cru: clock-controller@110e0000 { + compatible = "rockchip,rk3228-cru"; + reg = <0x110e0000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = <&cru PLL_GPLL>; + assigned-clock-rates = <594000000>; + }; + + emmc: dwmmc@30020000 { + compatible = "rockchip,rk3288-dw-mshc"; + reg = <0x30020000 0x4000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <37500000>; + clock-freq-min-max = <400000 37500000>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + bus-width = <8>; + default-sample-phase = <158>; + num-slots = <1>; + fifo-depth = <0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "disabled"; + }; + + gic: interrupt-controller@32010000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x32011000 0x1000>, + <0x32012000 0x1000>, + <0x32014000 0x2000>, + <0x32016000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3228-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@11110000 { + compatible = "rockchip,gpio-bank"; + reg = <0x11110000 0x100>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@11120000 { + compatible = "rockchip,gpio-bank"; + reg = <0x11120000 0x100>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@11130000 { + compatible = "rockchip,gpio-bank"; + reg = <0x11130000 0x100>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@11140000 { + compatible = "rockchip,gpio-bank"; + reg = <0x11140000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>, + <1 25 RK_FUNC_2 &pcfg_pull_none>, + <1 26 RK_FUNC_2 &pcfg_pull_none>, + <1 27 RK_FUNC_2 &pcfg_pull_none>, + <1 28 RK_FUNC_2 &pcfg_pull_none>, + <1 29 RK_FUNC_2 &pcfg_pull_none>, + <1 30 RK_FUNC_2 &pcfg_pull_none>, + <1 31 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>, + <2 27 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>, + <1 10 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>, + <1 19 RK_FUNC_2 &pcfg_pull_none>; + }; + + uart2_cts: uart2-cts { + rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart2_rts: uart2-rts { + rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 43949a677..452ca2441 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -43,10 +43,26 @@ / { compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288"; -}; -&cpu0 { - cpu0-supply = <&vdd_cpu>; + vcc_lcd: vcc-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_en>; + regulator-name = "vcc_lcd"; + vin-supply = <&vcc_io>; + }; + + vcc_wl: vcc-wl { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pwr>; + regulator-name = "vcc_wl"; + vin-supply = <&vcc_18>; + }; }; &i2c0 { @@ -119,8 +135,8 @@ vdd_log: REG3 { regulator-name = "VDD_LOG"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; regulator-always-on; }; @@ -133,7 +149,7 @@ vccio_sd: REG5 { regulator-name = "VCCIO_SD"; - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -152,7 +168,7 @@ regulator-always-on; }; - vcca_tp: REG8 { + vcc_tp: REG8 { regulator-name = "VCCA_TP"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -189,3 +205,17 @@ }; }; }; + +&pinctrl { + lcd { + lcd_en: lcd-en { + rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_pwr: wifi-pwr { + rockchip,pins = <7 9 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 18eb6cb49..736b08b0b 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -43,17 +43,6 @@ / { compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - #clock-cells = <0>; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; }; &i2c0 { @@ -244,19 +233,3 @@ }; }; }; - -&gmac { - phy-supply = <&vcc_phy>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "ok"; -}; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index f6d2e7894..4faabdb65 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -89,6 +89,13 @@ pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; }; + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -160,6 +167,10 @@ }; }; +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + &emmc { broken-cd; bus-width = <8>; @@ -172,11 +183,6 @@ status = "okay"; }; -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -191,6 +197,27 @@ vqmmc-supply = <&vccio_sd>; }; +&gmac { + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 14b9fc73c..17f13c73f 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -78,6 +78,13 @@ }; }; + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -310,6 +317,12 @@ }; }; + ir { + ir_int: ir-int { + rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 1813b7c36..1ece66f3e 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -109,6 +109,7 @@ act8846: act8846@5a { compatible = "active-semi,act8846"; reg = <0x5a>; + system-power-controller; inl1-supply = <&vcc_io>; inl2-supply = <&vcc_sys>; inl3-supply = <&vcc_20>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 8af35c867..c5453a0b0 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -49,6 +49,13 @@ stdout-path = "serial2:115200n8"; }; + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "SPDIF"; @@ -131,6 +138,12 @@ }; &pinctrl { + ir { + ir_int: ir-int { + rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/rk3288-thermal.dtsi index 340406652..651b962e3 100644 --- a/arch/arm/boot/dts/rk3288-thermal.dtsi +++ b/arch/arm/boot/dts/rk3288-thermal.dtsi @@ -52,7 +52,7 @@ reserve_thermal: reserve_thermal { }; cpu_thermal: cpu_thermal { - polling-delay-passive = <1000>; /* milliseconds */ + polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ thermal-sensors = <&tsadc 1>; @@ -63,6 +63,11 @@ cpu_thermal: cpu_thermal { hysteresis = <2000>; /* millicelsius */ type = "passive"; }; + cpu_alert1: cpu_alert1 { + temperature = <75000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; cpu_crit: cpu_crit { temperature = <90000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ @@ -74,13 +79,18 @@ cpu_thermal: cpu_thermal { map0 { trip = <&cpu_alert0>; cooling-device = + <&cpu0 THERMAL_NO_LIMIT 6>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; gpu_thermal: gpu_thermal { - polling-delay-passive = <1000>; /* milliseconds */ + polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ thermal-sensors = <&tsadc 2>; diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts new file mode 100644 index 000000000..cf5311d26 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -0,0 +1,139 @@ +/* + * Google Veyron Brain Rev 0 board device tree source + * + * Copyright 2014 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-veyron.dtsi" + +/ { + model = "Google Brain"; + compatible = "google,veyron-brain-rev0", "google,veyron-brain", + "google,veyron", "rockchip,rk3288"; + + vcc33_sys: vcc33-sys { + vin-supply = <&vcc_5v>; + }; + + vcc33_io: vcc33_io { + compatible = "regulator-fixed"; + regulator-name = "vcc33_io"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc33_sys>; + /* This is gated by vcc_18 too */ + }; + + /* This turns on vbus for host2 and otg (dwc2) */ + vcc5_host2: vcc5-host2-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pwr_en>; + regulator-name = "vcc5_host2"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&pinctrl { + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb-host { + usb2_pwr_en: usb2-pwr-en { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&rk808 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + + /delete-property/ vcc6-supply; + + regulators { + /* vcc33_io is sourced directly from vcc33_sys */ + /delete-node/ LDO_REG1; + + /* This is not a pwren anymore, but the real power supply */ + vdd10_lcd: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-suspend-mem-disabled; + }; + + vcc18_hdmi: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc18_hdmi"; + regulator-suspend-mem-disabled; + }; + }; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts new file mode 100644 index 000000000..f36f6f459 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -0,0 +1,250 @@ +/* + * Google Veyron Mickey Rev 0 board device tree source + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-veyron.dtsi" + +/ { + model = "Google Mickey"; + compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7", + "google,veyron-mickey-rev6", "google,veyron-mickey-rev5", + "google,veyron-mickey-rev4", "google,veyron-mickey-rev3", + "google,veyron-mickey-rev2", "google,veyron-mickey-rev1", + "google,veyron-mickey-rev0", "google,veyron-mickey", + "google,veyron", "rockchip,rk3288"; + + vcc_5v: vcc-5v { + vin-supply = <&vcc33_sys>; + }; + + vcc33_io: vcc33_io { + compatible = "regulator-fixed"; + regulator-name = "vcc33_io"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc33_sys>; + }; +}; + +&cpu_thermal { + /delete-node/ trips; + /delete-node/ cooling-maps; + + trips { + cpu_alert_almost_warm: cpu_alert_almost_warm { + temperature = <63000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert_warm: cpu_alert_warm { + temperature = <65000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert_almost_hot: cpu_alert_almost_hot { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert_hot: cpu_alert_hot { + temperature = <82000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert_hotter: cpu_alert_hotter { + temperature = <84000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert_very_hot: cpu_alert_very_hot { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* + * After 1st level, throttle the CPU down to as low as 1.4 GHz + * and don't let the GPU go faster than 400 MHz. Note that we + * won't throttle the GPU lower than 400 MHz due to CPU + * heat--we'll let the GPU do the rest itself. + */ + cpu_warm_limit_cpu { + trip = <&cpu_alert_warm>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT 4>; + }; + + /* + * Add some discrete steps to help throttling system deal + * with the fact that there are two passive cooling devices: + * the CPU and the GPU. + * + * - 1.2 GHz - 1.0 GHz (almost hot) + * - 800 MHz (hot) + * - 800 MHz - 696 MHz (hotter) + * - 696 MHz - min (very hot) + * + * Note: + * - 800 MHz appears to be a "sweet spot" for me. I can run + * some pretty serious workload here and be happy. + * - After 696 MHz we stop lowering voltage, so throttling + * past there is less effective. + */ + cpu_almost_hot_limit_cpu { + trip = <&cpu_alert_almost_hot>; + cooling-device = + <&cpu0 5 6>; + }; + cpu_hot_limit_cpu { + trip = <&cpu_alert_hot>; + cooling-device = + <&cpu0 7 7>; + }; + cpu_hotter_limit_cpu { + trip = <&cpu_alert_hotter>; + cooling-device = + <&cpu0 7 8>; + }; + cpu_very_hot_limit_cpu { + trip = <&cpu_alert_very_hot>; + cooling-device = + <&cpu0 8 THERMAL_NO_LIMIT>; + }; + }; +}; + +&emmc { + /delete-property/mmc-hs200-1_8v; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c4 { + status = "disabled"; +}; + +&i2s { + status = "okay"; + clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>; +}; + +&rk808 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + + /delete-property/ vcc6-supply; + /delete-property/ vcc12-supply; + + vcc11-supply = <&vcc33_sys>; + + regulators { + /* vcc33_io is sourced directly from vcc33_sys */ + /delete-node/ LDO_REG1; + /delete-node/ LDO_REG7; + + /* This is not a pwren anymore, but the real power supply */ + vdd10_lcd: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-suspend-mem-disabled; + }; + + vcc18_lcd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + regulator-suspend-mem-disabled; + }; + }; +}; + +&pinctrl { + hdmi { + power_hdmi_on: power-hdmi-on { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&usb_host0_ehci { + status = "disabled"; +}; + +&usb_host1 { + status = "disabled"; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&power_hdmi_on>; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 85f0373df..699beb0a9 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -121,6 +121,18 @@ clock-frequency = <400000>; i2c-scl-falling-time-ns = <50>; i2c-scl-rising-time-ns = <300>; + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int &touch_rst>; + reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + vcc33-supply = <&vcc33_touch>; + vccio-supply = <&vcc33_touch>; + }; }; &rk808 { diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index a7ea7d06c..b34a7b5b3 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -88,6 +88,14 @@ }; }; +&cpu_alert0 { + temperature = <65000>; +}; + +&cpu_alert1 { + temperature = <70000>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 5e61f0772..9fce91fff 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -340,6 +340,11 @@ i2c-scl-rising-time-ns = <1000>; }; +&power { + assigned-clocks = <&cru SCLK_EDP_24M>; + assigned-clock-parents = <&xin24m>; +}; + &pwm1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 04ea209f1..8ac49f3ef 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -53,6 +53,7 @@ interrupt-parent = <&gic>; aliases { + ethernet0 = &gmac; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -777,9 +778,23 @@ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + rockchip,playback-channels = <8>; + rockchip,capture-channels = <2>; status = "disabled"; }; + crypto: cypto-controller@ff8a0000 { + compatible = "rockchip,rk3288-crypto"; + reg = <0xff8a0000 0x4000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>, + <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>; + clock-names = "aclk", "hclk", "sclk", "apb_pclk"; + resets = <&cru SRST_CRYPTO>; + reset-names = "crypto-rst"; + status = "okay"; + }; + vopb: vop@ff930000 { compatible = "rockchip,rk3288-vop"; reg = <0xff930000 0x19c>; @@ -886,6 +901,19 @@ interrupts = <GIC_PPI 9 0xf04>; }; + efuse: efuse@ffb40000 { + compatible = "rockchip,rockchip-efuse"; + reg = <0xffb40000 0x20>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru PCLK_EFUSE256>; + clock-names = "pclk_efuse"; + + cpu_leakage: cpu_leakage@17 { + reg = <0x17 0x1>; + }; + }; + usbphy: phy { compatible = "rockchip,rk3288-usb-phy"; rockchip,grf = <&grf>; @@ -1144,7 +1172,7 @@ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>; }; - sdmmc_cd: sdmcc-cd { + sdmmc_cd: sdmmc-cd { rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 4497d288a..99eeea702 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -49,6 +49,7 @@ interrupt-parent = <&gic>; aliases { + ethernet0 = &emac; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 4dfca8fc4..3f750f617 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -637,6 +637,12 @@ atmel,clk-output-range = <0 83000000>; }; + pdmic_clk: pdmic_clk { + #clock-cells = <0>; + reg = <48>; + atmel,clk-output-range = <0 83000000>; + }; + i2s0_clk: i2s0_clk { #clock-cells = <0>; reg = <54>; @@ -763,6 +769,11 @@ atmel,clk-output-range = <0 83000000>; }; + pdmic_gclk: pdmic_gclk { + #clock-cells = <0>; + reg = <48>; + }; + i2s0_gclk: i2s0_gclk { #clock-cells = <0>; reg = <54>; @@ -852,6 +863,19 @@ clock-names = "t0_clk", "slow_clk"; }; + pdmic: pdmic@f8018000 { + compatible = "atmel,sama5d2-pdmic"; + reg = <0xf8018000 0x124>; + interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(50))>; + dma-names = "rx"; + clocks = <&pdmic_clk>, <&pdmic_gclk>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + uart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x100>; @@ -929,6 +953,13 @@ clocks = <&h32ck>; }; + watchdog@f8048040 { + compatible = "atmel,sama5d4-wdt"; + reg = <0xf8048040 0x10>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; + sckc@f8048050 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xf8048050 0x4>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 3daf8d5d7..db1151c18 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -451,7 +451,7 @@ interrupt-parent = <&pmc>; interrupts = <AT91_PMC_MCKRDY>; clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <125000000 177000000>; + atmel,clk-output-range = <125000000 200000000>; atmel,clk-divisors = <1 2 4 3>; }; @@ -916,7 +916,7 @@ }; i2c0: i2c@f8014000 { - compatible = "atmel,at91sam9x5-i2c"; + compatible = "atmel,sama5d4-i2c"; reg = <0xf8014000 0x4000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 @@ -935,7 +935,7 @@ }; i2c1: i2c@f8018000 { - compatible = "atmel,at91sam9x5-i2c"; + compatible = "atmel,sama5d4-i2c"; reg = <0xf8018000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 @@ -975,7 +975,7 @@ }; i2c2: i2c@f8024000 { - compatible = "atmel,at91sam9x5-i2c"; + compatible = "atmel,sama5d4-i2c"; reg = <0xf8024000 0x4000>; interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 @@ -1669,15 +1669,23 @@ pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = <AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* MCI0_CK, conflict with PCK1(ISI_MCK) */ - AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_CDB, conflict with NAND_D0 */ - AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB0, conflict with NAND_D1 */ + AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_CDA, conflict with NAND_D0 */ + AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA0, conflict with NAND_D1 */ >; }; pinctrl_mmc0_dat1_3: mmc0_dat1_3 { atmel,pins = - <AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB1, conflict with NAND_D2 */ - AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB2, conflict with NAND_D3 */ - AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB3, conflict with NAND_D4 */ + <AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA1, conflict with NAND_D2 */ + AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA2, conflict with NAND_D3 */ + AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA3, conflict with NAND_D4 */ + >; + }; + pinctrl_mmc0_dat4_7: mmc0_dat4_7 { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA4, conflict with NAND_D5 */ + AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA5, conflict with NAND_D6 */ + AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA6, conflict with NAND_D7 */ + AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA7, conflict with NAND_OE */ >; }; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 7fc560281..aa8bae3b8 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -147,7 +147,7 @@ gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; label = "SW1"; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index ff7c8f298..3a6056f9f 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -28,6 +28,7 @@ reg = <0>; clock-frequency = <1196000000>; power-domains = <&pd_a2sl>; + next-level-cache = <&L2>; }; cpu@1 { device_type = "cpu"; @@ -35,6 +36,7 @@ reg = <1>; clock-frequency = <1196000000>; power-domains = <&pd_a2sl>; + next-level-cache = <&L2>; }; }; @@ -53,6 +55,18 @@ <0xf0000100 0x100>; }; + L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xf0100000 0x1000>; + interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_a3sm>; + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + arm,shared-override; + cache-unified; + cache-level = <2>; + }; + sbsc2: memory-controller@fb400000 { compatible = "renesas,sbsc-sh73a0"; reg = <0xfb400000 0x400>; @@ -259,6 +273,50 @@ status = "disabled"; }; + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; + reg = <0xe6e20000 0x0064>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks SH73A0_CLK_MSIOF0>; + power-domains = <&pd_a3sp>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; + reg = <0xe6e10000 0x0064>; + interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_MSIOF1>; + power-domains = <&pd_a3sp>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; + reg = <0xe6e00000 0x0064>; + interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_MSIOF2>; + power-domains = <&pd_a3sp>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c90000 { + compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; + reg = <0xe6c90000 0x0064>; + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_MSIOF3>; + power-domains = <&pd_a3sp>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; @@ -798,13 +856,13 @@ mstp0_clks: mstp0_clks@e6150130 { compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xe6150130 4>, <0xe6150030 4>; - clocks = <&cpg_clocks SH73A0_CLK_HP>; + clocks = <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>; #clock-cells = <1>; clock-indices = < - SH73A0_CLK_IIC2 + SH73A0_CLK_IIC2 SH73A0_CLK_MSIOF0 >; clock-output-names = - "iic2"; + "iic2", "msiof0"; }; mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -834,20 +892,24 @@ reg = <0xe6150138 4>, <0xe6150040 4>; clocks = <&sub_clk>, <&cpg_clocks SH73A0_CLK_HP>, <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>, - <&sub_clk>, <&sub_clk>, <&sub_clk>, <&sub_clk>, - <&sub_clk>, <&sub_clk>; + <&sub_clk>, <&sub_clk>, <&sub_clk>, + <&sub_clk>, <&sub_clk>, <&sub_clk>, + <&sub_clk>, <&sub_clk>, <&sub_clk>; #clock-cells = <1>; clock-indices = < SH73A0_CLK_SCIFA7 SH73A0_CLK_SY_DMAC - SH73A0_CLK_MP_DMAC SH73A0_CLK_SCIFA5 - SH73A0_CLK_SCIFB SH73A0_CLK_SCIFA0 - SH73A0_CLK_SCIFA1 SH73A0_CLK_SCIFA2 - SH73A0_CLK_SCIFA3 SH73A0_CLK_SCIFA4 + SH73A0_CLK_MP_DMAC SH73A0_CLK_MSIOF3 + SH73A0_CLK_MSIOF1 SH73A0_CLK_SCIFA5 + SH73A0_CLK_SCIFB SH73A0_CLK_MSIOF2 + SH73A0_CLK_SCIFA0 SH73A0_CLK_SCIFA1 + SH73A0_CLK_SCIFA2 SH73A0_CLK_SCIFA3 + SH73A0_CLK_SCIFA4 >; clock-output-names = - "scifa7", "sy_dmac", "mp_dmac", "scifa5", - "scifb", "scifa0", "scifa1", "scifa2", - "scifa3", "scifa4"; + "scifa7", "sy_dmac", "mp_dmac", "msiof3", + "msiof1", "scifa5", "scifb", "msiof2", + "scifa0", "scifa1", "scifa2", "scifa3", + "scifa4"; }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 39c470e29..3ed4abdaa 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -677,6 +677,7 @@ #size-cells = <0>; clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>; clock-names = "biu", "ciu"; + status = "disabled"; }; ocram: sram@ffff0000 { diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index a75a66603..3c8867862 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -79,6 +79,7 @@ &mmc0 { vmmc-supply = <®ulator_3_3v>; vqmmc-supply = <®ulator_3_3v>; + status = "okay"; }; &usb1 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts index 555e9caf2..afea3645a 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts @@ -100,6 +100,7 @@ &mmc0 { vmmc-supply = <®ulator_3_3v>; vqmmc-supply = <®ulator_3_3v>; + status = "okay"; }; &uart0 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi new file mode 100644 index 000000000..f86f9c060 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2015 Marek Vasut <marex@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "DENX MCV"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1 GiB */ + }; +}; + +&mmc0 { /* On-SoM eMMC */ + bus-width = <8>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts new file mode 100644 index 000000000..7186a29b8 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts @@ -0,0 +1,94 @@ +/* + * Copyright (C) 2015 Marek Vasut <marex@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "socfpga_cyclone5_mcv.dtsi" + +/ { + model = "DENX MCV EVK"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + aliases { + ethernet0 = &gmac0; + stmpe-i2c0 = &stmpe1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&gmac0 { + phy-mode = "rgmii"; + status = "okay"; +}; + +&gpio0 { /* GPIO 0 ... 28 */ + status = "okay"; +}; + +&gpio1 { /* GPIO 29 ... 57 */ + status = "okay"; +}; + +&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */ + status = "okay"; +}; + +&i2c0 { + status = "okay"; + speed-mode = <0>; + + stmpe1: stmpe811@41 { + compatible = "st,stmpe811"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + id = <0>; + blocks = <0x5>; + irq-gpio = <&portb 28 0x4>; /* GPIO 57, trig. level HI */ + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + ts,sample-time = <4>; + ts,mod-12b = <1>; + ts,ref-sel = <0>; + ts,adc-freq = <1>; + ts,ave-ctrl = <1>; + ts,touch-det-delay = <3>; + ts,settling = <4>; + ts,fraction-z = <7>; + ts,i-drive = <1>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index d4d0a28fb..15e43f43f 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -84,6 +84,7 @@ cd-gpios = <&portb 18 0>; vmmc-supply = <®ulator_3_3v>; vqmmc-supply = <®ulator_3_3v>; + status = "okay"; }; &usb1 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index 48bf651bd..b61f22f9a 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -80,6 +80,7 @@ &mmc0 { vmmc-supply = <®ulator_3_3v>; vqmmc-supply = <®ulator_3_3v>; + status = "okay"; }; &usb1 { diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 50f5e9d09..341f5b7ed 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -512,63 +512,51 @@ // DB8500_REGULATOR_VAPE db8500_vape_reg: db8500_vape { - regulator-compatible = "db8500_vape"; regulator-always-on; }; // DB8500_REGULATOR_VARM db8500_varm_reg: db8500_varm { - regulator-compatible = "db8500_varm"; }; // DB8500_REGULATOR_VMODEM db8500_vmodem_reg: db8500_vmodem { - regulator-compatible = "db8500_vmodem"; }; // DB8500_REGULATOR_VPLL db8500_vpll_reg: db8500_vpll { - regulator-compatible = "db8500_vpll"; }; // DB8500_REGULATOR_VSMPS1 db8500_vsmps1_reg: db8500_vsmps1 { - regulator-compatible = "db8500_vsmps1"; }; // DB8500_REGULATOR_VSMPS2 db8500_vsmps2_reg: db8500_vsmps2 { - regulator-compatible = "db8500_vsmps2"; }; // DB8500_REGULATOR_VSMPS3 db8500_vsmps3_reg: db8500_vsmps3 { - regulator-compatible = "db8500_vsmps3"; }; // DB8500_REGULATOR_VRF1 db8500_vrf1_reg: db8500_vrf1 { - regulator-compatible = "db8500_vrf1"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSP db8500_sva_mmdsp_reg: db8500_sva_mmdsp { - regulator-compatible = "db8500_sva_mmdsp"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSPRET db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { - regulator-compatible = "db8500_sva_mmdsp_ret"; }; // DB8500_REGULATOR_SWITCH_SVAPIPE db8500_sva_pipe_reg: db8500_sva_pipe { - regulator-compatible = "db8500_sva_pipe"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSP db8500_sia_mmdsp_reg: db8500_sia_mmdsp { - regulator-compatible = "db8500_sia_mmdsp"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSPRET @@ -577,39 +565,32 @@ // DB8500_REGULATOR_SWITCH_SIAPIPE db8500_sia_pipe_reg: db8500_sia_pipe { - regulator-compatible = "db8500_sia_pipe"; }; // DB8500_REGULATOR_SWITCH_SGA db8500_sga_reg: db8500_sga { - regulator-compatible = "db8500_sga"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_B2R2_MCDE db8500_b2r2_mcde_reg: db8500_b2r2_mcde { - regulator-compatible = "db8500_b2r2_mcde"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_ESRAM12 db8500_esram12_reg: db8500_esram12 { - regulator-compatible = "db8500_esram12"; }; // DB8500_REGULATOR_SWITCH_ESRAM12RET db8500_esram12_ret_reg: db8500_esram12_ret { - regulator-compatible = "db8500_esram12_ret"; }; // DB8500_REGULATOR_SWITCH_ESRAM34 db8500_esram34_reg: db8500_esram34 { - regulator-compatible = "db8500_esram34"; }; // DB8500_REGULATOR_SWITCH_ESRAM34RET db8500_esram34_ret_reg: db8500_esram34_ret { - regulator-compatible = "db8500_esram34_ret"; }; }; @@ -721,7 +702,6 @@ compatible = "stericsson,ab8500-ext-regulator"; ab8500_ext1_reg: ab8500_ext1 { - regulator-compatible = "ab8500_ext1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -729,7 +709,6 @@ }; ab8500_ext2_reg: ab8500_ext2 { - regulator-compatible = "ab8500_ext2"; regulator-min-microvolt = <1360000>; regulator-max-microvolt = <1360000>; regulator-boot-on; @@ -737,7 +716,6 @@ }; ab8500_ext3_reg: ab8500_ext3 { - regulator-compatible = "ab8500_ext3"; regulator-min-microvolt = <3400000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -750,7 +728,6 @@ // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - regulator-compatible = "ab8500_ldo_aux1"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2900000>; regulator-boot-on; @@ -760,56 +737,46 @@ // supplies to the on-board eMMC ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { - regulator-compatible = "ab8500_ldo_aux2"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; }; // supply for VAUX3; SDcard slots ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { - regulator-compatible = "ab8500_ldo_aux3"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; }; // supply for v-intcore12; VINTCORE12 LDO ab8500_ldo_intcore_reg: ab8500_ldo_intcore { - regulator-compatible = "ab8500_ldo_intcore"; }; // supply for tvout; gpadc; TVOUT LDO ab8500_ldo_tvout_reg: ab8500_ldo_tvout { - regulator-compatible = "ab8500_ldo_tvout"; }; // supply for ab8500-usb; USB LDO ab8500_ldo_usb_reg: ab8500_ldo_usb { - regulator-compatible = "ab8500_ldo_usb"; }; // supply for ab8500-vaudio; VAUDIO LDO ab8500_ldo_audio_reg: ab8500_ldo_audio { - regulator-compatible = "ab8500_ldo_audio"; }; // supply for v-anamic1 VAMIC1 LDO ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { - regulator-compatible = "ab8500_ldo_anamic1"; }; // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { - regulator-compatible = "ab8500_ldo_anamic2"; }; // supply for v-dmic; VDMIC LDO ab8500_ldo_dmic_reg: ab8500_ldo_dmic { - regulator-compatible = "ab8500_ldo_dmic"; }; // supply for U8500 CSI/DSI; VANA LDO ab8500_ldo_ana_reg: ab8500_ldo_ana { - regulator-compatible = "ab8500_ldo_ana"; }; }; }; diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 78b75256c..c3987ad06 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -114,6 +114,8 @@ rohm,touch-max-x = <384>; rohm,touch-max-y = <704>; rohm,flip-y; + pinctrl-names = "default"; + pinctrl-0 = <&touch_rohm_mode>; }; bu21013_tp@5d { @@ -124,6 +126,8 @@ rohm,touch-max-x = <384>; rohm,touch-max-y = <704>; rohm,flip-y; + pinctrl-names = "default"; + pinctrl-0 = <&touch_rohm_mode>; }; }; @@ -166,6 +170,25 @@ }; }; }; + touch { + touch_rohm_mode: touch_rohm { + /* + * ROHM touch screen uses GPIO 143 for + * RST1, GPIO 146 for RST2 and + * GPIO 67 for interrupts. Pull-up + * the IRQ line and drive both + * reset signals low. + */ + stuib_cfg1 { + pins = "GPIO143_D12", "GPIO146_D13"; + ste,config = <&gpio_out_lo>; + }; + stuib_cfg2 { + pins = "GPIO67_G2"; + ste,config = <&gpio_in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 0e1c96943..b7b4211c5 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -66,7 +66,7 @@ keypad,num-columns = <8>; keypad,num-rows = <8>; linux,no-autorepeat; - linux,wakeup; + wakeup-source; linux,keymap = <0x0301006b 0x04010066 0x06040072 @@ -104,13 +104,40 @@ <19 IRQ_TYPE_EDGE_RISING>; }; lsm303dlh@1e { - /* Magnetometer */ + /* + * This magnetometer is packaged with + * the accelerometer, and has a DRDY line, + * however it is not connected on this + * board so it can not generate interrupts. + */ compatible = "st,lsm303dlh-magn"; reg = <0x1e>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; + }; + lis331dl@1c { + /* Accelerometer */ + compatible = "st,lis331dl-accel"; + st,drdy-int-pin = <1>; + reg = <0x1c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; + }; + ak8974@0f { + /* Magnetometer */ + compatible = "asahi-kasei,ak8974"; + reg = <0x0f>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; - pinctrl-0 = <&magneto_tvk_mode>; + pinctrl-0 = <&gyro_magn_tvk_mode>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; }; l3g4200d@68 { /* Gyroscope */ @@ -119,6 +146,10 @@ reg = <0x68>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_magn_tvk_mode>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; }; lsp001wm@5c { /* Barometer/pressure sensor */ @@ -159,17 +190,22 @@ /* Accelerometer interrupt lines 1 & 2 */ tvk_cfg { pins = "GPIO82_C1", "GPIO83_D3"; - ste,config = <&gpio_in_pu>; + ste,config = <&gpio_in_pd>; }; }; }; - magnetometer { - magneto_tvk_mode: magneto_tvk { - /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ + gyroscope { + /* + * These lines are shared between Gyroscope l3g400dh + * and AK8974 magnetometer. + */ + gyro_magn_tvk_mode: gyro_magn_tvk { + /* GPIO 31 used for INT pull down the line */ tvk_cfg1 { pins = "GPIO31_V3"; - ste,config = <&gpio_in_pu>; + ste,config = <&gpio_in_pd>; }; + /* GPIO 32 used for DRDY, pull this down */ tvk_cfg2 { pins = "GPIO32_V2"; ste,config = <&gpio_in_pd>; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 9c2387b34..149a72e7e 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -43,7 +43,6 @@ <&vaudio_hf_hrefv60_mode>, <&gbf_hrefv60_mode>, <&hdtv_hrefv60_mode>, - <&touch_hrefv60_mode>, <&gpios_hrefv60_mode>; sdi0 { @@ -190,23 +189,6 @@ }; }; }; - touch { - touch_hrefv60_mode: touch_hrefv60 { - /* - * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and - * GPIO 67 for interrupts. Pull-up the IRQ line and drive both - * reset signals low. - */ - hrefv60_cfg1 { - pins = "GPIO143_D12", "GPIO146_D13"; - ste,config = <&gpio_out_lo>; - }; - hrefv60_cfg2 { - pins = "GPIO67_G2"; - ste,config = <&gpio_in_pu>; - }; - }; - }; mcde { lcd_hrefv60_mode: lcd_hrefv60 { /* diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 35282c010..789329030 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -163,7 +163,7 @@ label = "user_button"; gpios = <&gpio0 3 0x1>; linux,code = <1>; /* KEY_ESC */ - gpio-key,wakeup; + wakeup-source; pinctrl-names = "default"; pinctrl-0 = <&user_button_default_mode>; }; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index e80e42163..08f82077b 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -281,7 +281,8 @@ vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&magneto_snowball_mode>; - gpios = <&gpio5 5 0x4>; /* DRDY line */ + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */ }; l3g4200d@68 { /* Gyroscope */ @@ -292,9 +293,9 @@ vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&gyro_snowball_mode>; - gpios = <&gpio5 6 0x4>; /* DRDY line */ interrupt-parent = <&gpio5>; - interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */ + interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */ + <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */ }; lsp001wm@5c { /* Barometer/pressure sensor */ diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts index 82a661677..9c73ac284 100644 --- a/arch/arm/boot/dts/ste-u300.dts +++ b/arch/arm/boot/dts/ste-u300.dts @@ -315,21 +315,17 @@ ab3100-regulators { compatible = "stericsson,ab3100-regulators"; ab3100_ldo_a_reg: ab3100_ldo_a { - regulator-compatible = "ab3100_ldo_a"; startup-delay-us = <200>; regulator-always-on; regulator-boot-on; }; ab3100_ldo_c_reg: ab3100_ldo_c { - regulator-compatible = "ab3100_ldo_c"; startup-delay-us = <200>; }; ab3100_ldo_d_reg: ab3100_ldo_d { - regulator-compatible = "ab3100_ldo_d"; startup-delay-us = <200>; }; ab3100_ldo_e_reg: ab3100_ldo_e { - regulator-compatible = "ab3100_ldo_e"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; startup-delay-us = <200>; @@ -337,7 +333,6 @@ regulator-boot-on; }; ab3100_ldo_f_reg: ab3100_ldo_f { - regulator-compatible = "ab3100_ldo_f"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; startup-delay-us = <600>; @@ -345,28 +340,23 @@ regulator-boot-on; }; ab3100_ldo_g_reg: ab3100_ldo_g { - regulator-compatible = "ab3100_ldo_g"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <2850000>; startup-delay-us = <400>; }; ab3100_ldo_h_reg: ab3100_ldo_h { - regulator-compatible = "ab3100_ldo_h"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <2750000>; startup-delay-us = <200>; }; ab3100_ldo_k_reg: ab3100_ldo_k { - regulator-compatible = "ab3100_ldo_k"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2750000>; startup-delay-us = <200>; }; ab3100_ext_reg: ab3100_ext { - regulator-compatible = "ab3100_ext"; }; ab3100_buck_reg: ab3100_buck { - regulator-compatible = "ab3100_buck"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1800000>; startup-delay-us = <1000>; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index ad21a4293..133375bc8 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -6,6 +6,9 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <dt-bindings/clock/stih407-clks.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/media/c8sectpfe.h> / { soc { sbc_serial0: serial@9530000 { @@ -35,12 +38,18 @@ status = "okay"; }; - i2c@9842000 { + ssc2: i2c@9842000 { status = "okay"; + clock-frequency = <100000>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; }; - i2c@9843000 { + ssc3: i2c@9843000 { status = "okay"; + clock-frequency = <100000>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; }; i2c@9844000 { @@ -93,5 +102,38 @@ phy-mode = "rgmii"; fixed-link = <0 1 1000 0 0>; }; + + demux@08a20000 { + compatible = "st,stih407-c8sectpfe"; + status = "okay"; + reg = <0x08a20000 0x10000>, + <0x08a00000 0x4000>; + reg-names = "c8sectpfe", "c8sectpfe-ram"; + interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, + <GIC_SPI 35 IRQ_TYPE_NONE>; + interrupt-names = "c8sectpfe-error-irq", + "c8sectpfe-idle-irq"; + pinctrl-0 = <&pinctrl_tsin0_serial>; + pinctrl-1 = <&pinctrl_tsin0_parallel>; + pinctrl-2 = <&pinctrl_tsin3_serial>; + pinctrl-3 = <&pinctrl_tsin4_serial_alt3>; + pinctrl-4 = <&pinctrl_tsin5_serial_alt1>; + pinctrl-names = "tsin0-serial", + "tsin0-parallel", + "tsin3-serial", + "tsin4-serial", + "tsin5-serial"; + clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>; + clock-names = "c8sectpfe"; + + /* tsin0 is TSA on NIMA */ + tsin0: port@0 { + tsin-num = <0>; + serial-not-parallel; + i2c-bus = <&ssc2>; + reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>; + dvb-card = <STV0367_TDA18212_NIMA_1>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index 3f0aeb828..ac64781a0 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -65,12 +65,22 @@ /* * TODO: * 2x cameras via CSI - * audio * AXP battery management * NAND * OTG * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48 */ +&codec { + /* PH15 controls power to external amplifier (ft2012q) */ + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; &ehci0 { status = "okay"; @@ -86,15 +96,13 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; +#include "axp209.dtsi" + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; @@ -110,7 +118,7 @@ }; &lradc { - vref-supply = <®_vcc3v0>; + vref-supply = <®_ldo2>; status = "okay"; @@ -146,6 +154,40 @@ status = "okay"; }; +&pio { + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_usb1_vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index 487ce6351..e09053bf5 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -47,6 +47,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/pwm/pwm.h> / { model = "iNet-1"; @@ -56,11 +57,25 @@ serial0 = &uart0; }; + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin_inet>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + }; + chosen { stdout-path = "serial0:115200n8"; }; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -104,6 +119,19 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5x: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_wake_pin>; + wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */ + touchscreen-size-x = <600>; + touchscreen-size-y = <1024>; + touchscreen-swapped-x-y; + }; }; &lradc { @@ -151,6 +179,20 @@ }; &pio { + bl_en_pin_inet: bl_en_pin@0 { + allwinner,pins = "PH7"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + touchscreen_wake_pin: touchscreen_wake_pin@0 { + allwinner,pins = "PB13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { allwinner,pins = "PH4"; allwinner,function = "gpio_in"; @@ -166,6 +208,12 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 2fffc0434..ca49b0d0c 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -59,6 +59,159 @@ chosen { stdout-path = "serial0:115200n8"; }; + + gpio_keys { + compatible = "gpio-keys-polled"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_inet9f>; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + button@0 { + label = "Left Joystick Left"; + linux,code = <ABS_X>; + linux,input-type = <EV_ABS>; + linux,input-value = <0xffffffff>; /* -1 */ + gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */ + }; + + button@1 { + label = "Left Joystick Right"; + linux,code = <ABS_X>; + linux,input-type = <EV_ABS>; + linux,input-value = <1>; + gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */ + }; + + button@2 { + label = "Left Joystick Up"; + linux,code = <ABS_Y>; + linux,input-type = <EV_ABS>; + linux,input-value = <0xffffffff>; /* -1 */ + gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ + }; + + button@3 { + label = "Left Joystick Down"; + linux,code = <ABS_Y>; + linux,input-type = <EV_ABS>; + linux,input-value = <1>; + gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ + }; + + button@4 { + label = "Right Joystick Left"; + linux,code = <ABS_Z>; + linux,input-type = <EV_ABS>; + linux,input-value = <0xffffffff>; /* -1 */ + gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */ + }; + + button@5 { + label = "Right Joystick Right"; + linux,code = <ABS_Z>; + linux,input-type = <EV_ABS>; + linux,input-value = <1>; + gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */ + }; + + button@6 { + label = "Right Joystick Up"; + linux,code = <ABS_RZ>; + linux,input-type = <EV_ABS>; + linux,input-value = <0xffffffff>; /* -1 */ + gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */ + }; + + button@7 { + label = "Right Joystick Down"; + linux,code = <ABS_RZ>; + linux,input-type = <EV_ABS>; + linux,input-value = <1>; + gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ + }; + + button@8 { + label = "DPad Left"; + linux,code = <ABS_HAT0X>; + linux,input-type = <EV_ABS>; + linux,input-value = <0xffffffff>; /* -1 */ + gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */ + }; + + button@9 { + label = "DPad Right"; + linux,code = <ABS_HAT0X>; + linux,input-type = <EV_ABS>; + linux,input-value = <1>; + gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */ + }; + + button@10 { + label = "DPad Up"; + linux,code = <ABS_HAT0Y>; + linux,input-type = <EV_ABS>; + linux,input-value = <0xffffffff>; /* -1 */ + gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */ + }; + + button@11 { + label = "DPad Down"; + linux,code = <ABS_HAT0Y>; + linux,input-type = <EV_ABS>; + linux,input-value = <1>; + gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */ + }; + + button@12 { + label = "Button X"; + linux,code = <BTN_X>; + gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */ + }; + + button@13 { + label = "Button Y"; + linux,code = <BTN_Y>; + gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */ + }; + + button@14 { + label = "Button A"; + linux,code = <BTN_A>; + gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ + }; + + button@15 { + label = "Button B"; + linux,code = <BTN_B>; + gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */ + }; + + button@16 { + label = "Select Button"; + linux,code = <BTN_SELECT>; + gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */ + }; + + button@17 { + label = "Start Button"; + linux,code = <BTN_START>; + gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */ + }; + + button@18 { + label = "Top Left Button"; + linux,code = <BTN_TL>; + gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ + }; + + button@19 { + label = "Top Right Button"; + linux,code = <BTN_TR>; + gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */ + }; + }; }; &cpu0 { @@ -157,6 +310,17 @@ }; &pio { + key_pins_inet9f: key_pins@0 { + allwinner,pins = "PA0", "PA1", "PA3", "PA4", + "PA5", "PA6", "PA8", "PA9", + "PA11", "PA12", "PA13", + "PA14", "PA15", "PA16", "PA17", + "PH22", "PH23", "PH24", "PH25", "PH26"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { allwinner,pins = "PH4"; allwinner,function = "gpio_in"; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index 3c7eebe17..ddf0683cb 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -58,6 +58,10 @@ }; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index 82e69c382..918f97294 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -47,6 +47,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/pwm/pwm.h> / { model = "Point of View Protab2-IPS9"; @@ -56,11 +57,28 @@ serial0 = &uart0; }; + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin_protab>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + }; + chosen { stdout-path = "serial0:115200n8"; }; }; +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -93,6 +111,22 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + pixcir_ts@5c { + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + compatible = "pixcir,pixcir_tangoc"; + reg = <0x5c>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */ + attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */ + enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; + wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; }; &lradc { @@ -129,6 +163,27 @@ }; &pio { + bl_en_pin_protab: bl_en_pin@0 { + allwinner,pins = "PH7"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + touchscreen_pins: touchscreen_pins@0 { + allwinner,pins = "PA5", "PB13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { allwinner,pins = "PH4"; allwinner,function = "gpio_in"; @@ -144,6 +199,12 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index aa90f3193..2c8f5e6ad 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -66,7 +66,7 @@ "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>; + <&ahb_gates 44>, <&dram_gates 26>; status = "disabled"; }; @@ -75,7 +75,8 @@ "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&ahb_gates 46>; + <&ahb_gates 44>, <&ahb_gates 46>, + <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -84,7 +85,8 @@ "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, - <&ahb_gates 46>; + <&ahb_gates 46>, <&dram_gates 25>, + <&dram_gates 26>; status = "disabled"; }; @@ -93,7 +95,8 @@ "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, <&ahb_gates 46>; + <&ahb_gates 44>, <&ahb_gates 46>, + <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; }; @@ -492,6 +495,40 @@ clock-output-names = "spi3"; }; + dram_gates: clk@01c20100 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-dram-gates-clk"; + reg = <0x01c20100 0x4>; + clocks = <&pll5 0>; + clock-indices = <0>, + <1>, <2>, + <3>, + <4>, + <5>, <6>, + <15>, + <24>, <25>, + <26>, <27>, + <28>, <29>; + clock-output-names = "dram_ve", + "dram_csi0", "dram_csi1", + "dram_ts", + "dram_tvd", + "dram_tve0", "dram_tve1", + "dram_output", + "dram_de_fe1", "dram_de_fe0", + "dram_de_be0", "dram_de_be1", + "dram_de_mp", "dram_ace"; + }; + + ve_clk: clk@01c2013c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-ve-clk"; + reg = <0x01c2013c 0x4>; + clocks = <&pll4>; + clock-output-names = "ve"; + }; + codec_clk: clk@01c20140 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-codec-clk"; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index 2b3511ea2..a790ec8ad 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -86,6 +86,20 @@ status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp152: pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts new file mode 100644 index 000000000..7fbb0b055 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -0,0 +1,241 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Empire Electronix D709 tablet"; + compatible = "empire-electronix,d709", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + /* TODO: backlight uses axp gpio1 as enable pin */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb0_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb0_vbus_pin_a { + allwinner,pins = "PG12"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index eb793d5a2..fa9ddfdcf 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -47,11 +47,21 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/pwm/pwm.h> / { model = "Utoo P66"; compatible = "utoo,p66", "allwinner,sun5i-a13"; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + /* Note levels of 10 / 20% result in backlight off */ + brightness-levels = <0 30 40 50 60 70 80 90 100>; + default-brightness-level = <6>; + /* TODO: backlight uses axp gpio1 as enable pin */ + }; + i2c_lcd: i2c@0 { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; @@ -63,6 +73,13 @@ }; }; +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -158,6 +175,13 @@ }; &pio { + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PG3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc0_cd_pin_p66: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; @@ -201,6 +225,12 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index b19902073..360adfb1e 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -113,18 +113,83 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; -®_usb1_vbus { - gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; +&p2wi { status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; }; -&usb1_vbus_pin_a { - allwinner,pins = "PH27"; +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; }; -&usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; +®_dc1sw { + regulator-name = "vcc-lcd-usb2"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +/* Voltage source for I2C pullup resistors for I2C Bus 0 */ +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi"; }; &uart0 { @@ -132,3 +197,9 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + +&usbphy { + usb1_vbus-supply = <®_dldo1>; + usb2_vbus-supply = <®_dc1sw>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index fd7594ff9..67c8a7644 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -92,6 +92,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; operating-points = < diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts new file mode 100644 index 000000000..f5b5325a7 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts @@ -0,0 +1,169 @@ +/* + * Copyright 2015 Stefan Roese <sr@denx.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "ICnova-A20 SWAC"; + compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index 4f432f8ad..c9e648d17 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -68,6 +68,10 @@ }; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index b7fe10247..c3c626b2c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -1,5 +1,6 @@ /* * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> + * Copyright 2015 - Karsten Merker <merker@debian.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -45,6 +46,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -86,6 +88,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_rgmii_a>; @@ -110,6 +116,60 @@ }; }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@190 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <190000>; + }; + + button@390 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <390000>; + }; + + button@600 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <600000>; + }; + + button@800 { + label = "Search"; + linux,code = <KEY_SEARCH>; + channel = <0>; + voltage = <800000>; + }; + + button@980 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <980000>; + }; + + button@1180 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1180000>; + }; + + button@1400 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <1400000>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; @@ -120,6 +180,16 @@ status = "okay"; }; +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */ + cd-inverted; + status = "okay"; +}; + &ohci0 { status = "okay"; }; @@ -142,6 +212,13 @@ allwinner,drive = <SUN4I_PINCTRL_20_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 { + allwinner,pins = "PH0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; ®_ahci_5v { diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 4f65664e5..2be04c438 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -95,6 +95,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 1757a6ad7..ddac7328b 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -82,6 +82,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 861a4a66f..1a8b39be1 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -111,6 +111,10 @@ allwinner,pins = "PH2"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 78239ad98..2f6b21add 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -48,6 +48,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> / { model = "Wexler TAB7200"; @@ -57,11 +58,28 @@ serial0 = &uart0; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_enable_pin>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + }; + chosen { stdout-path = "serial0:115200n8"; }; }; +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -98,6 +116,18 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + gt911: touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_reset_pin>; + irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */ + reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */ + touchscreen-swapped-x-y; + }; }; &lradc { @@ -142,6 +172,27 @@ }; &pio { + bl_enable_pin: bl_enable_pin@0 { + allwinner,pins = "PH7"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ts_reset_pin: ts_reset_pin@0 { + allwinner,pins = "PB13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { allwinner,pins = "PH4"; allwinner,function = "gpio_in"; @@ -150,6 +201,12 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index 85b500d8c..dc31d476e 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -80,6 +80,18 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index e02eb720c..0940a788f 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -68,7 +68,7 @@ "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>; + <&ahb_gates 44>, <&dram_gates 26>; status = "disabled"; }; @@ -76,7 +76,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, + <&dram_gates 26>; status = "disabled"; }; @@ -85,7 +86,7 @@ "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>; + <&ahb_gates 44>, <&dram_gates 26>; status = "disabled"; }; }; @@ -501,6 +502,40 @@ clock-output-names = "spi3"; }; + dram_gates: clk@01c20100 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-dram-gates-clk"; + reg = <0x01c20100 0x4>; + clocks = <&pll5 0>; + clock-indices = <0>, + <1>, <2>, + <3>, + <4>, + <5>, <6>, + <15>, + <24>, <25>, + <26>, <27>, + <28>, <29>; + clock-output-names = "dram_ve", + "dram_csi0", "dram_csi1", + "dram_ts", + "dram_tvd", + "dram_tve0", "dram_tve1", + "dram_output", + "dram_de_fe1", "dram_de_fe0", + "dram_de_be0", "dram_de_be1", + "dram_de_mp", "dram_ace"; + }; + + ve_clk: clk@01c2013c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-ve-clk"; + reg = <0x01c2013c 0x4>; + clocks = <&pll4>; + clock-output-names = "ve"; + }; + codec_clk: clk@01c20140 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-codec-clk"; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 0c0964d4f..6f88fb0dd 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -56,7 +56,7 @@ #size-cells = <1>; ranges; - framebuffer@0 { + simplefb_lcd: framebuffer@0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts new file mode 100644 index 000000000..e67df5905 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Xunlong Orange Pi Plus"; + compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi new file mode 100644 index 000000000..1524130e4 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -0,0 +1,497 @@ +/* + * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + /* dummy clock until actually implemented */ + pll5: pll5_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "pll5"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6", "pll6x2"; + }; + + pll6d2: pll6d2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&pll6 0>; + clock-output-names = "pll6d2"; + }; + + /* dummy clock until pll6 can be reused */ + pll8: pll8_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <1>; + clock-output-names = "pll8"; + }; + + cpu: cpu_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20050 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; + clock-output-names = "cpu"; + }; + + axi: axi_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-axi-clk"; + reg = <0x01c20050 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb1: ahb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-ahb1-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; + clock-output-names = "ahb1"; + }; + + ahb2: ahb2_clk@01c2005c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-h3-ahb2-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&ahb1>, <&pll6d2>; + clock-output-names = "ahb2"; + }; + + apb1: apb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb1>; + clock-output-names = "apb1"; + }; + + apb2: apb2_clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; + clock-output-names = "apb2"; + }; + + bus_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-h3-bus-gates-clk"; + reg = <0x01c20060 0x14>; + clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; + clock-names = "ahb1", "ahb2", "apb1", "apb2"; + clock-indices = <5>, <6>, <8>, + <9>, <10>, <13>, + <14>, <17>, <18>, + <19>, <20>, + <21>, <23>, + <24>, <25>, + <26>, <27>, + <28>, <29>, + <30>, <31>, <32>, + <35>, <36>, <37>, + <40>, <41>, <43>, + <44>, <52>, <53>, + <54>, <64>, + <65>, <69>, <72>, + <76>, <77>, <78>, + <96>, <97>, <98>, + <112>, <113>, + <114>, <115>, + <116>, <128>, <135>; + clock-output-names = "bus_ce", "bus_dma", "bus_mmc0", + "bus_mmc1", "bus_mmc2", "bus_nand", + "bus_sdram", "bus_gmac", "bus_ts", + "bus_hstimer", "bus_spi0", + "bus_spi1", "bus_otg", + "bus_otg_ehci0", "bus_ehci1", + "bus_ehci2", "bus_ehci3", + "bus_otg_ohci0", "bus_ohci1", + "bus_ohci2", "bus_ohci3", "bus_ve", + "bus_lcd0", "bus_lcd1", "bus_deint", + "bus_csi", "bus_tve", "bus_hdmi", + "bus_de", "bus_gpu", "bus_msgbox", + "bus_spinlock", "bus_codec", + "bus_spdif", "bus_pio", "bus_ths", + "bus_i2s0", "bus_i2s1", "bus_i2s2", + "bus_i2c0", "bus_i2c1", "bus_i2c2", + "bus_uart0", "bus_uart1", + "bus_uart2", "bus_uart3", + "bus_scr", "bus_ephy", "bus_dbg"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 0>, <&pll8>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 0>, <&pll8>; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 0>, <&pll8>; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5>; + clock-output-names = "mbus"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-h3-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 6>; + resets = <&ahb_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&bus_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb_rst 8>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&bus_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb_rst 9>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&bus_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb_rst 10>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-h3-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 69>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PA4", "PA5"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { + allwinner,pins = "PF6"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + ahb_rst: reset@01c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-ahb1-reset"; + reg = <0x01c202c0 0xc>; + }; + + apb1_rst: reset@01c202d0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d0 0x4>; + }; + + apb2_rst: reset@01c202d8 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d8 0x4>; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&bus_gates 112>; + resets = <&apb2_rst 16>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&bus_gates 113>; + resets = <&apb2_rst 17>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&bus_gates 114>; + resets = <&apb2_rst 18>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&bus_gates 115>; + resets = <&apb2_rst 19>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 6484dcf69..382bd9fc5 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -62,9 +62,31 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_cubieboard4>; + + green { + label = "cubieboard4:green:usr"; + gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */ + }; + + red { + label = "cubieboard4:red:usr"; + gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + }; + }; }; &pio { + led_pins_cubieboard4: led-pins@0 { + allwinner,pins = "PH6", "PH17"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { allwinner,pins = "PH18"; allwinner,function = "gpio_in"; @@ -92,6 +114,14 @@ status = "okay"; }; +&r_ir { + status = "okay"; +}; + +&r_rsb { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 6ce4b5e8b..c0060e4f7 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -65,7 +65,7 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins_optimus>; + pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>; /* The LED names match those found on the board */ @@ -74,7 +74,10 @@ gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; }; - /* led3 is on PM15, in R_PIO */ + led3 { + label = "optimus:led3:usr"; + gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */ + }; led4 { label = "optimus:led4:usr"; @@ -180,6 +183,23 @@ status = "okay"; }; +&r_ir { + status = "okay"; +}; + +&r_pio { + led_r_pins_optimus: led-pins@1 { + allwinner,pins = "PM15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_rsb { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 1118bf5cc..e838f206f 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -128,6 +128,17 @@ */ ranges = <0 0 0 0x20000000>; + /* + * This clock is actually configurable from the PRCM address + * space. The external 24M oscillator can be turned off, and + * the clock switched to an internal 16M RC oscillator. Under + * normal operation there's no reason to do this, and the + * default is to use the external good one, so just model this + * as a fixed clock. Also it is not entirely clear if the + * osc24M mux in the PRCM affects the entire clock tree, which + * would also throw all the PLL clock rates off, or just the + * downstream clocks in the PRCM. + */ osc24M: osc24M_clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -135,6 +146,13 @@ clock-output-names = "osc24M"; }; + /* + * The 32k clock is from an external source, normally the + * AC100 codec/RTC chip. This clock is by default enabled + * and clocked at 32768 Hz, from the oscillator connected + * to the AC100. It is configurable, but no such driver or + * bindings exist yet. + */ osc32k: osc32k_clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -164,6 +182,14 @@ "usb_phy2", "usb_hsic_12M"; }; + pll3: clk@06000008 { + /* placeholder until implemented */ + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-rate = <0>; + clock-output-names = "pll3"; + }; + pll4: clk@0600000c { #clock-cells = <0>; compatible = "allwinner,sun9i-a80-pll4-clk"; @@ -350,6 +376,68 @@ "apb1_uart2", "apb1_uart3", "apb1_uart4", "apb1_uart5"; }; + + cpus_clk: clk@08001410 { + compatible = "allwinner,sun9i-a80-cpus-clk"; + reg = <0x08001410 0x4>; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>; + clock-output-names = "cpus"; + }; + + ahbs: ahbs_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&cpus_clk>; + clock-output-names = "ahbs"; + }; + + apbs: clk@0800141c { + compatible = "allwinner,sun8i-a23-apb0-clk"; + reg = <0x0800141c 0x4>; + #clock-cells = <0>; + clocks = <&ahbs>; + clock-output-names = "apbs"; + }; + + apbs_gates: clk@08001428 { + compatible = "allwinner,sun9i-a80-apbs-gates-clk"; + reg = <0x08001428 0x4>; + #clock-cells = <1>; + clocks = <&apbs>; + clock-indices = <0>, <1>, + <2>, <3>, + <4>, <5>, + <6>, <7>, + <12>, <13>, + <16>, <17>, + <18>, <20>; + clock-output-names = "apbs_pio", "apbs_ir", + "apbs_timer", "apbs_rsb", + "apbs_uart", "apbs_1wire", + "apbs_i2c0", "apbs_i2c1", + "apbs_ps2_0", "apbs_ps2_1", + "apbs_dma", "apbs_i2s0", + "apbs_i2s1", "apbs_twd"; + }; + + r_1wire_clk: clk@08001450 { + reg = <0x08001450 0x4>; + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "r_1wire"; + }; + + r_ir_clk: clk@08001454 { + reg = <0x08001454 0x4>; + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "r_ir"; + }; }; soc { @@ -764,14 +852,83 @@ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; }; + apbs_rst: reset@080014b0 { + reg = <0x080014b0 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + nmi_intc: interrupt-controller@080015a0 { + compatible = "allwinner,sun9i-a80-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x080015a0 0xc>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + + r_ir: ir@08002000 { + compatible = "allwinner,sun5i-a13-ir"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&r_ir_pins>; + clocks = <&apbs_gates 1>, <&r_ir_clk>; + clock-names = "apb", "ir"; + resets = <&apbs_rst 1>; + reg = <0x08002000 0x40>; + status = "disabled"; + }; + r_uart: serial@08002800 { compatible = "snps,dw-apb-uart"; reg = <0x08002800 0x400>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apbs_gates 4>; + resets = <&apbs_rst 4>; + status = "disabled"; + }; + + r_pio: pinctrl@08002c00 { + compatible = "allwinner,sun9i-a80-r-pinctrl"; + reg = <0x08002c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apbs_gates 0>; + resets = <&apbs_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + r_ir_pins: r_ir { + allwinner,pins = "PL6"; + allwinner,function = "s_cir_rx"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + r_rsb_pins: r_rsb { + allwinner,pins = "PN0", "PN1"; + allwinner,function = "s_rsb"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + }; + + r_rsb: i2c@08003400 { + compatible = "allwinner,sun8i-a23-rsb"; + reg = <0x08003400 0x400>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apbs_gates 3>; + clock-frequency = <3000000>; + resets = <&apbs_rst 3>; + pinctrl-names = "default"; + pinctrl-0 = <&r_rsb_pins>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi new file mode 100644 index 000000000..ef665d21d --- /dev/null +++ b/arch/arm/boot/dts/tango4-common.dtsi @@ -0,0 +1,130 @@ +/* + * Based on Mans Rullgard's Tango3 DT + * https://github.com/mansr/linux-tangox + */ + +#define CPU_CLK 0 +#define SYS_CLK 1 + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + periph_clk: periph_clk { + compatible = "fixed-factor-clock"; + clocks = <&clkgen CPU_CLK>; + clock-mult = <1>; + clock-div = <2>; + #clock-cells = <0>; + }; + + mpcore { + compatible = "simple-bus"; + ranges = <0x00000000 0x20000000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + + scu@0 { + compatible = "arm,cortex-a9-scu"; + reg = <0x0 0x100>; + }; + + twd@600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x600 0x10>; + interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>; + clocks = <&periph_clk>; + always-on; + }; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, <0x100 0x100>; + }; + }; + + l2cc: l2-cache-controller@20100000 { + compatible = "arm,pl310-cache"; + reg = <0x20100000 0x1000>; + cache-level = <2>; + cache-unified; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&irq0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + xtal: xtal { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + }; + + clkgen: clkgen@10000 { + compatible = "sigma,tango4-clkgen"; + reg = <0x10000 0x40>; + clocks = <&xtal>; + #clock-cells = <1>; + }; + + tick-counter@10048 { + compatible = "sigma,tick-counter"; + reg = <0x10048 0x4>; + clocks = <&xtal>; + }; + + uart: serial@10700 { + compatible = "ralink,rt2880-uart"; + reg = <0x10700 0x30>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <7372800>; + reg-shift = <2>; + }; + + eth0: ethernet@26000 { + compatible = "sigma,smp8734-ethernet"; + reg = <0x26000 0x800>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkgen SYS_CLK>; + }; + + intc: interrupt-controller@6e000 { + compatible = "sigma,smp8642-intc"; + reg = <0x6e000 0x400>; + ranges = <0 0x6e000 0x400>; + interrupt-parent = <&gic>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <1>; + + irq0: irq0@000 { + reg = <0x000 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + }; + + irq1: irq1@100 { + reg = <0x100 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + }; + + irq2: irq2@300 { + reg = <0x300 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tango4-smp8758.dtsi b/arch/arm/boot/dts/tango4-smp8758.dtsi new file mode 100644 index 000000000..7ed88ee62 --- /dev/null +++ b/arch/arm/boot/dts/tango4-smp8758.dtsi @@ -0,0 +1,31 @@ +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "sigma,tango4-smp"; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + next-level-cache = <&l2cc>; + device_type = "cpu"; + reg = <0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a9"; + next-level-cache = <&l2cc>; + device_type = "cpu"; + reg = <1>; + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-affinity = <&cpu0>, <&cpu1>; + interrupts = + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts new file mode 100644 index 000000000..3e5b9c81a --- /dev/null +++ b/arch/arm/boot/dts/tango4-vantage-1172.dts @@ -0,0 +1,37 @@ +/dts-v1/; + +#include "tango4-smp8758.dtsi" +#include "tango4-common.dtsi" + +/ { + model = "Sigma Designs SMP8758 Vantage-1172 Rev E1"; + compatible = "sigma,vantage-1172", "sigma,smp8758", "sigma,tango4"; + + aliases { + serial = &uart; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; /* 2 GB */ + }; + + chosen { + stdout-path = "serial:115200n8"; + }; +}; + +ð0 { + phy-connection-type = "rgmii"; + phy-handle = <ð0_phy>; + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8035 */ + eth0_phy: ethernet-phy@4 { + compatible = "ethernet-phy-id004d.d072", + "ethernet-phy-ieee802.3-c22"; + interrupts = <37 IRQ_TYPE_EDGE_RISING>; + reg = <4>; + }; +}; diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi index 3537ae5b2..5288e6dff 100644 --- a/arch/arm/boot/dts/twl4030_omap3.dtsi +++ b/arch/arm/boot/dts/twl4030_omap3.dtsi @@ -19,7 +19,7 @@ */ twl4030_pins: pinmux_twl4030_pins { pinctrl-single,pins = < - 0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ + OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ >; }; }; diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi index a4fa5703c..e373f59ce 100644 --- a/arch/arm/boot/dts/twl6030_omap4.dtsi +++ b/arch/arm/boot/dts/twl6030_omap4.dtsi @@ -24,7 +24,7 @@ &omap4_pmx_wkup { twl6030_wkup_pins: pinmux_twl6030_wkup_pins { pinctrl-single,pins = < - 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ + OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ >; }; }; @@ -32,7 +32,7 @@ &omap4_pmx_core { twl6030_pins: pinmux_twl6030_pins { pinctrl-single,pins = < - 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ + OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ >; }; }; diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi new file mode 100644 index 000000000..ea9301aaa --- /dev/null +++ b/arch/arm/boot/dts/uniphier-common32.dtsi @@ -0,0 +1,135 @@ +/* + * Device Tree Source commonly used by UniPhier ARM SoCs + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart_clk>; + }; + + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart_clk>; + }; + + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&uart_clk>; + }; + + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 177 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&uart_clk>; + }; + + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x104>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x104>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + pinctrl: pinctrl@5f801000 { + /* specify compatible in each SoC DTSI */ + reg = <0x5f801000 0xe00>; + }; + }; +}; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index af4938195..34f0d8dcd 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -42,7 +42,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +/include/ "uniphier-common32.dtsi" / { compatible = "socionext,ph1-ld4"; @@ -78,188 +78,105 @@ clock-frequency = <100000000>; }; }; +}; - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-parent = <&intc>; - - extbus: extbus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - }; - - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, - <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(512 * 1024)>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - - serial0: serial@54006800 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006800 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - interrupts = <0 33 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - serial1: serial@54006900 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006900 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - interrupts = <0 35 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - serial2: serial@54006a00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006a00 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - interrupts = <0 37 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - serial3: serial@54006b00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006b00 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - interrupts = <0 29 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - i2c0: i2c@58400000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58400000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - interrupts = <0 41 1>; - clocks = <&iobus_clk>; - clock-frequency = <100000>; - }; - - i2c1: i2c@58480000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58480000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - interrupts = <0 42 1>; - clocks = <&iobus_clk>; - clock-frequency = <100000>; - }; - - /* chip-internal connection for DMD */ - i2c2: i2c@58500000 { - compatible = "socionext,uniphier-i2c"; - reg = <0x58500000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - interrupts = <0 43 1>; - clocks = <&iobus_clk>; - clock-frequency = <400000>; - }; +&soc { + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; - i2c3: i2c@58580000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58580000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - interrupts = <0 44 1>; - clocks = <&iobus_clk>; - clock-frequency = <100000>; - }; + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; - system-bus-controller@58c00000 { - compatible = "socionext,uniphier-system-bus-controller"; - reg = <0x58c00000 0x400>, <0x59800000 0x2000>; - }; + i2c1: i2c@58480000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58480000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; - usb0: usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a800100 0x100>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0>; - interrupts = <0 80 4>; - }; + /* chip-internal connection for DMD */ + i2c2: i2c@58500000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58500000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&iobus_clk>; + clock-frequency = <400000>; + }; - usb1: usb@5a810100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a810100 0x100>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1>; - interrupts = <0 81 4>; - }; + i2c3: i2c@58580000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58580000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; - usb2: usb@5a820100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a820100 0x100>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2>; - interrupts = <0 82 4>; - }; + usb0: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + interrupts = <0 80 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + }; - pinctrl: pinctrl@5f801000 { - compatible = "socionext,ph1-ld4-pinctrl", - "syscon"; - reg = <0x5f801000 0xe00>; - }; + usb1: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + interrupts = <0 81 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + }; - timer@60000200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x60000200 0x20>; - interrupts = <1 11 0x104>; - clocks = <&arm_timer_clk>; - }; + usb2: usb@5a820100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + interrupts = <0 82 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + }; - timer@60000600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x60000600 0x20>; - interrupts = <1 13 0x104>; - clocks = <&arm_timer_clk>; - }; +}; - intc: interrupt-controller@60001000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x60001000 0x1000>, - <0x60000100 0x100>; - }; - }; +&serial3 { + interrupts = <0 29 4>; }; -/include/ "uniphier-pinctrl.dtsi" +&pinctrl { + compatible = "socionext,ph1-ld4-pinctrl", "syscon"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi index c6499ee65..532115234 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi @@ -53,7 +53,7 @@ compatible = "socionext,ph1-ld6b"; }; -/* UART3 unavilable: the pads are not wired to the package balls */ +/* UART3 unavailable: the pads are not wired to the package balls */ &serial3 { status = "disabled"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index 254642fe0..d78142fb3 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -42,7 +42,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +/include/ "uniphier-common32.dtsi" / { compatible = "socionext,ph1-pro4"; @@ -86,203 +86,115 @@ clock-frequency = <50000000>; }; }; +}; - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-parent = <&intc>; - - extbus: extbus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - }; - - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, - <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(768 * 1024)>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - - serial0: serial@54006800 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006800 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - interrupts = <0 33 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - serial1: serial@54006900 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006900 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - interrupts = <0 35 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - serial2: serial@54006a00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006a00 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - interrupts = <0 37 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - serial3: serial@54006b00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006b00 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - interrupts = <0 29 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - i2c0: i2c@58780000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58780000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - interrupts = <0 41 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; - - i2c1: i2c@58781000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58781000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - interrupts = <0 42 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; - - i2c2: i2c@58782000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58782000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - interrupts = <0 43 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; - - i2c3: i2c@58783000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58783000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - interrupts = <0 44 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; - - /* i2c4 does not exist */ +&soc { + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(768 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; - /* chip-internal connection for DMD */ - i2c5: i2c@58785000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58785000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 25 4>; - clocks = <&i2c_clk>; - clock-frequency = <400000>; - }; + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - /* chip-internal connection for HDMI */ - i2c6: i2c@58786000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58786000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 26 4>; - clocks = <&i2c_clk>; - clock-frequency = <400000>; - }; + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - system-bus-controller@58c00000 { - compatible = "socionext,uniphier-system-bus-controller"; - reg = <0x58c00000 0x400>, <0x59800000 0x2000>; - }; + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - usb2: usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a800100 0x100>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2>; - interrupts = <0 80 4>; - }; + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - usb3: usb@5a810100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a810100 0x100>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb3>; - interrupts = <0 81 4>; - }; + /* i2c4 does not exist */ - pinctrl: pinctrl@5f801000 { - compatible = "socionext,ph1-pro4-pinctrl", - "syscon"; - reg = <0x5f801000 0xe00>; - }; + /* chip-internal connection for DMD */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; - timer@60000200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x60000200 0x20>; - interrupts = <1 11 0x304>; - clocks = <&arm_timer_clk>; - }; + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; - timer@60000600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x60000600 0x20>; - interrupts = <1 13 0x304>; - clocks = <&arm_timer_clk>; - }; + usb2: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + interrupts = <0 80 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + }; - intc: interrupt-controller@60001000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x60001000 0x1000>, - <0x60000100 0x100>; - }; + usb3: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + interrupts = <0 81 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; }; }; -/include/ "uniphier-pinctrl.dtsi" +&pinctrl { + compatible = "socionext,ph1-pro4-pinctrl", "syscon"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi index 11eb76239..2f389ea75 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -42,7 +42,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +/include/ "uniphier-common32.dtsi" / { compatible = "socionext,ph1-pro5"; @@ -86,193 +86,109 @@ clock-frequency = <50000000>; }; }; +}; - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-parent = <&intc>; - - extbus: extbus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - }; - - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, - <0x506c0000 0x400>; - interrupts = <0 190 4>, <0 191 4>; - cache-unified; - cache-size = <(2 * 1024 * 1024)>; - cache-sets = <512>; - cache-line-size = <128>; - cache-level = <2>; - next-level-cache = <&l3>; - }; - - l3: l3-cache@500c8000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, - <0x506c8000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(2 * 1024 * 1024)>; - cache-sets = <512>; - cache-line-size = <256>; - cache-level = <3>; - }; - - serial0: serial@54006800 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006800 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - interrupts = <0 33 4>; - clocks = <&uart_clk>; - }; - - serial1: serial@54006900 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006900 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - interrupts = <0 35 4>; - clocks = <&uart_clk>; - }; - - serial2: serial@54006a00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006a00 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - interrupts = <0 37 4>; - clocks = <&uart_clk>; - }; - - serial3: serial@54006b00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006b00 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - interrupts = <0 177 4>; - clocks = <&uart_clk>; - }; - - i2c0: i2c@58780000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58780000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - interrupts = <0 41 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; - - i2c1: i2c@58781000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58781000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - interrupts = <0 42 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; - - i2c2: i2c@58782000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58782000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - interrupts = <0 43 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; - - i2c3: i2c@58783000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58783000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - interrupts = <0 44 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; +&soc { + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; + interrupts = <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; - /* i2c4 does not exist */ + l3: l3-cache@500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; - /* chip-internal connection for DMD */ - i2c5: i2c@58785000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58785000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 25 4>; - clocks = <&i2c_clk>; - clock-frequency = <400000>; - }; + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - /* chip-internal connection for HDMI */ - i2c6: i2c@58786000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58786000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 26 4>; - clocks = <&i2c_clk>; - clock-frequency = <400000>; - }; + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - system-bus-controller@58c00000 { - compatible = "socionext,uniphier-system-bus-controller"; - reg = <0x58c00000 0x400>, <0x59800000 0x2000>; - }; + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - pinctrl: pinctrl@5f801000 { - compatible = "socionext,ph1-pro5-pinctrl", "syscon"; - reg = <0x5f801000 0xe00>; - }; + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - timer@60000200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x60000200 0x20>; - interrupts = <1 11 0x304>; - clocks = <&arm_timer_clk>; - }; + /* i2c4 does not exist */ - timer@60000600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x60000600 0x20>; - interrupts = <1 13 0x304>; - clocks = <&arm_timer_clk>; - }; + /* chip-internal connection for DMD */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; - intc: interrupt-controller@60001000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x60001000 0x1000>, - <0x60000100 0x100>; - }; + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; }; }; -/include/ "uniphier-pinctrl.dtsi" +&pinctrl { + compatible = "socionext,ph1-pro5-pinctrl", "syscon"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index e88559b66..7d06a1c48 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -42,7 +42,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +/include/ "uniphier-common32.dtsi" / { compatible = "socionext,ph1-sld8"; @@ -78,188 +78,104 @@ clock-frequency = <100000000>; }; }; +}; - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-parent = <&intc>; - - extbus: extbus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - }; - - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, - <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(256 * 1024)>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - - serial0: serial@54006800 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006800 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - interrupts = <0 33 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - serial1: serial@54006900 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006900 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - interrupts = <0 35 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - serial2: serial@54006a00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006a00 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - interrupts = <0 37 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - serial3: serial@54006b00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006b00 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - interrupts = <0 29 4>; - clocks = <&uart_clk>; - fifo-size = <64>; - }; - - i2c0: i2c@58400000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58400000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - interrupts = <0 41 1>; - clocks = <&iobus_clk>; - clock-frequency = <100000>; - }; - - i2c1: i2c@58480000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58480000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - interrupts = <0 42 1>; - clocks = <&iobus_clk>; - clock-frequency = <100000>; - }; - - /* chip-internal connection for DMD */ - i2c2: i2c@58500000 { - compatible = "socionext,uniphier-i2c"; - reg = <0x58500000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - interrupts = <0 43 1>; - clocks = <&iobus_clk>; - clock-frequency = <400000>; - }; - - i2c3: i2c@58580000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58580000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - interrupts = <0 44 1>; - clocks = <&iobus_clk>; - clock-frequency = <100000>; - }; - - system-bus-controller@58c00000 { - compatible = "socionext,uniphier-system-bus-controller"; - reg = <0x58c00000 0x400>, <0x59800000 0x2000>; - }; +&soc { + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(256 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; - usb0: usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a800100 0x100>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0>; - interrupts = <0 80 4>; - }; + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; - usb1: usb@5a810100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a810100 0x100>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1>; - interrupts = <0 81 4>; - }; + i2c1: i2c@58480000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58480000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; - usb2: usb@5a820100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a820100 0x100>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2>; - interrupts = <0 82 4>; - }; + /* chip-internal connection for DMD */ + i2c2: i2c@58500000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58500000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&iobus_clk>; + clock-frequency = <400000>; + }; - pinctrl: pinctrl@5f801000 { - compatible = "socionext,ph1-sld8-pinctrl", - "syscon"; - reg = <0x5f801000 0xe00>; - }; + i2c3: i2c@58580000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58580000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; - timer@60000200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x60000200 0x20>; - interrupts = <1 11 0x104>; - clocks = <&arm_timer_clk>; - }; + usb0: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + interrupts = <0 80 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + }; - timer@60000600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x60000600 0x20>; - interrupts = <1 13 0x104>; - clocks = <&arm_timer_clk>; - }; + usb1: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + interrupts = <0 81 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + }; - intc: interrupt-controller@60001000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x60001000 0x1000>, - <0x60000100 0x100>; - }; + usb2: usb@5a820100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + interrupts = <0 82 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; }; }; -/include/ "uniphier-pinctrl.dtsi" +&serial3 { + interrupts = <0 29 4>; +}; + +&pinctrl { + compatible = "socionext,ph1-sld8-pinctrl", "syscon"; +}; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi index 259f1a909..6bd353f2d 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -42,7 +42,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +/include/ "uniphier-common32.dtsi" / { compatible = "socionext,proxstream2"; @@ -100,189 +100,106 @@ clock-frequency = <50000000>; }; }; +}; - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-parent = <&intc>; - - extbus: extbus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - }; - - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, - <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; - cache-unified; - cache-size = <(1280 * 1024)>; - cache-sets = <512>; - cache-line-size = <128>; - cache-level = <2>; - }; - - serial0: serial@54006800 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006800 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - interrupts = <0 33 4>; - clocks = <&uart_clk>; - }; - - serial1: serial@54006900 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006900 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - interrupts = <0 35 4>; - clocks = <&uart_clk>; - }; - - serial2: serial@54006a00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006a00 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - interrupts = <0 37 4>; - clocks = <&uart_clk>; - }; - - serial3: serial@54006b00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006b00 0x40>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - interrupts = <0 177 4>; - clocks = <&uart_clk>; - }; - - i2c0: i2c@58780000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58780000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - interrupts = <0 41 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; - - i2c1: i2c@58781000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58781000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - interrupts = <0 42 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; - - i2c2: i2c@58782000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58782000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - interrupts = <0 43 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; - - i2c3: i2c@58783000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58783000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - interrupts = <0 44 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; - - /* chip-internal connection for DMD */ - i2c4: i2c@58784000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58784000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 45 4>; - clocks = <&i2c_clk>; - clock-frequency = <400000>; - }; +&soc { + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(1280 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + }; - /* chip-internal connection for STM */ - i2c5: i2c@58785000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58785000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 25 4>; - clocks = <&i2c_clk>; - clock-frequency = <400000>; - }; + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - /* chip-internal connection for HDMI */ - i2c6: i2c@58786000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58786000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 26 4>; - clocks = <&i2c_clk>; - clock-frequency = <400000>; - }; + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - system-bus-controller@58c00000 { - compatible = "socionext,uniphier-system-bus-controller"; - reg = <0x58c00000 0x400>, <0x59800000 0x2000>; - }; + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + interrupts = <0 43 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - pinctrl: pinctrl@5f801000 { - compatible = "socionext,proxstream2-pinctrl", "syscon"; - reg = <0x5f801000 0xe00>; - }; + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; - timer@60000200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x60000200 0x20>; - interrupts = <1 11 0xf04>; - clocks = <&arm_timer_clk>; - }; + /* chip-internal connection for DMD */ + i2c4: i2c@58784000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58784000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 45 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; - timer@60000600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x60000600 0x20>; - interrupts = <1 13 0xf04>; - clocks = <&arm_timer_clk>; - }; + /* chip-internal connection for STM */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; - intc: interrupt-controller@60001000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x60001000 0x1000>, - <0x60000100 0x100>; - }; + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; }; }; -/include/ "uniphier-pinctrl.dtsi" +&pinctrl { + compatible = "socionext,proxstream2-pinctrl", "syscon"; +}; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 3279bf1a1..6fd7efbea 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -30,9 +30,69 @@ }; core-module@10000000 { - compatible = "arm,core-module-versatile", "syscon"; + compatible = "arm,core-module-versatile", "syscon", "simple-mfd"; reg = <0x10000000 0x200>; + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; + /* OSC1 on AB, OSC4 on PB */ osc1: cm_aux_osc@24M { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index e5949b934..6e556be42 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -23,6 +23,18 @@ status = "okay"; }; +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan0>; + status = "disabled"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + &dspi1 { bus-num = <1>; pinctrl-names = "default"; @@ -125,6 +137,20 @@ &iomuxc { vf610-colibri { + pinctrl_flexcan0: can0grp { + fsl,pins = < + VF610_PAD_PTB14__CAN0_RX 0x31F1 + VF610_PAD_PTB15__CAN0_TX 0x31F2 + >; + }; + + pinctrl_flexcan1: can1grp { + fsl,pins = < + VF610_PAD_PTB16__CAN1_RX 0x31F1 + VF610_PAD_PTB17__CAN1_TX 0x31F2 + >; + }; + pinctrl_gpio_ext: gpio_ext { fsl,pins = < VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */ diff --git a/arch/arm/boot/dts/vf610m4-cosmic.dts b/arch/arm/boot/dts/vf610m4-cosmic.dts new file mode 100644 index 000000000..8944a2d20 --- /dev/null +++ b/arch/arm/boot/dts/vf610m4-cosmic.dts @@ -0,0 +1,90 @@ +/* + * Device tree for Cosmic+ VF6xx Cortex-M4 support + * + * Copyright (C) 2015 + * + * Based on vf610m4 Colibri + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "vf610m4.dtsi" + +/ { + model = "VF610 Cortex-M4"; + compatible = "fsl,vf610m4"; +}; + +&gpio0 { + status = "disabled"; +}; + +&gpio1 { + status = "disabled"; +}; + +&gpio2 { + status = "disabled"; +}; + +&gpio3 { + status = "disabled"; +}; + +&gpio4 { + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&iomuxc { + vf610-cosmic { + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA20__UART3_TX 0x21a2 + VF610_PAD_PTA21__UART3_RX 0x21a1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 3cd1b27f2..a9ceb5bac 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -455,6 +455,30 @@ status = "disabled"; }; + dspi2: dspi2@400ac000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x400ac000 0x1000>; + interrupts = <69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_DSPI2>; + clock-names = "dspi"; + spi-num-chipselects = <2>; + status = "disabled"; + }; + + dspi3: dspi3@400ad000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x400ad000 0x1000>; + interrupts = <70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_DSPI3>; + clock-names = "dspi"; + spi-num-chipselects = <2>; + status = "disabled"; + }; + adc1: adc@400bb000 { compatible = "fsl,vf610-adc"; reg = <0x400bb000 0x1000>; diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index a1a854b8a..e9ef539e1 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -281,8 +281,8 @@ sdhc@d800a000 { compatible = "wm,wm8505-sdhc"; - reg = <0xd800a000 0x1000>; - interrupts = <20 21>; + reg = <0xd800a000 0x400>; + interrupts = <20>, <21>; clocks = <&clksdhc>; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 1a5220e05..f283ff083 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -19,7 +19,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; @@ -33,7 +33,7 @@ >; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <1>; @@ -101,6 +101,8 @@ #gpio-cells = <2>; clocks = <&clkc 42>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&intc>; interrupts = <0 20 4>; reg = <0xe000a000 0x1000>; @@ -238,7 +240,7 @@ slcr: slcr@f8000000 { #address-cells = <1>; #size-cells = <1>; - compatible = "xlnx,zynq-slcr", "syscon", "simple-bus"; + compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd"; reg = <0xF8000000 0x1000>; ranges; clkc: clkc@100 { diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 5df8f81f4..cb64209bc 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -43,14 +43,14 @@ label = "sw14"; gpios = <&gpio0 12 0>; linux,code = <108>; /* down */ - gpio-key,wakeup; + wakeup-source; autorepeat; }; sw13 { label = "sw13"; gpios = <&gpio0 14 0>; linux,code = <103>; /* up */ - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index 2b25b6038..c77315764 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -83,7 +83,7 @@ static void mcpm_cpu_die(unsigned int cpu) #endif -static struct smp_operations __initdata mcpm_smp_ops = { +static const struct smp_operations mcpm_smp_ops __initconst = { .smp_boot_secondary = mcpm_boot_secondary, .smp_secondary_init = mcpm_secondary_init, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 45f4c21e3..e0df33320 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -84,7 +84,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); /* XXX: I'm unsure, but it seems so */ - return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)); + return !!(ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1))); } static int scoop_gpio_direction_input(struct gpio_chip *chip, diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 31cb07388..72def201c 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -10,7 +10,6 @@ CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y -CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_PERF=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y @@ -18,10 +17,6 @@ CONFIG_NAMESPACES=y CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y @@ -29,6 +24,7 @@ CONFIG_EMBEDDED=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y +CONFIG_CC_STACKPROTECTOR_REGULAR=y CONFIG_ARCH_MULTI_V6=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_BCM=y @@ -38,7 +34,6 @@ CONFIG_AEABI=y CONFIG_KSM=y CONFIG_CLEANCACHE=y CONFIG_SECCOMP=y -CONFIG_CC_STACKPROTECTOR=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_VFP=y @@ -57,7 +52,6 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y @@ -75,19 +69,30 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_BCM2835=y CONFIG_SPI=y CONFIG_SPI_BCM2835=y +CONFIG_SPI_BCM2835AUX=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_BCM2835_WDT=y CONFIG_FB=y CONFIG_FB_SIMPLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_BCM2835_SOC_I2S=y CONFIG_USB=y CONFIG_USB_STORAGE=y +CONFIG_USB_DWC2=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_BCM2835=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_ONESHOT=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y @@ -96,17 +101,19 @@ CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_LEDS_TRIGGER_TRANSIENT=y CONFIG_LEDS_TRIGGER_CAMERA=y +CONFIG_DMADEVICES=y +CONFIG_DMA_BCM2835=y CONFIG_STAGING=y -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y +CONFIG_MAILBOX=y +CONFIG_BCM2835_MBOX=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_PWM=y +CONFIG_PWM_BCM2835=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_FANOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index a7846d64b..158dde87f 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -132,6 +132,5 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_UART_PL01X=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index e0841a58f..24dcd2bb1 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -7,7 +7,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_EXYNOS3=y @@ -44,7 +43,6 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_CFG80211=y CONFIG_RFKILL_REGULATOR=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y @@ -74,6 +72,9 @@ CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_MAX77693_HAPTIC=y +CONFIG_INPUT_MAX8997_HAPTIC=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y @@ -87,6 +88,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y CONFIG_I2C_GPIO=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SPI=y +CONFIG_SPI_GPIO=y CONFIG_SPI_S3C64XX=y CONFIG_DEBUG_GPIO=y CONFIG_POWER_SUPPLY=y @@ -95,6 +97,7 @@ CONFIG_BATTERY_MAX17040=y CONFIG_BATTERY_MAX17042=y CONFIG_CHARGER_MAX14577=y CONFIG_CHARGER_MAX77693=y +CONFIG_CHARGER_MAX8997=y CONFIG_CHARGER_TPS65090=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_NTC_THERMISTOR=y @@ -113,6 +116,7 @@ CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77686=y CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX8997=y +CONFIG_MFD_MAX8998=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_TPS65090=y CONFIG_REGULATOR=y @@ -120,6 +124,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX14577=y CONFIG_REGULATOR_MAX8997=y +CONFIG_REGULATOR_MAX8998=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_MAX77693=y CONFIG_REGULATOR_MAX77802=y @@ -138,8 +143,10 @@ CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_FIMD=y CONFIG_DRM_EXYNOS_DSI=y CONFIG_DRM_EXYNOS_MIXER=y +CONFIG_DRM_EXYNOS_DPI=y CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_PANEL_SAMSUNG_LD9040=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y @@ -176,11 +183,15 @@ CONFIG_MMC_DW=y CONFIG_MMC_DW_EXYNOS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_CLASS_FLASH=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y +CONFIG_LEDS_MAX77693=y +CONFIG_LEDS_MAX8997=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MAX8997=y CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_MAX77802=y CONFIG_RTC_DRV_S5M=y @@ -195,6 +206,7 @@ CONFIG_COMMON_CLK_S2MPS11=y CONFIG_EXTCON=y CONFIG_EXTCON_MAX14577=y CONFIG_EXTCON_MAX77693=y +CONFIG_EXTCON_MAX8997=y CONFIG_IIO=y CONFIG_EXYNOS_ADC=y CONFIG_PWM=y @@ -203,6 +215,7 @@ CONFIG_PHY_EXYNOS5250_SATA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y @@ -210,6 +223,7 @@ CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y CONFIG_ROMFS_FS=y CONFIG_NFS_FS=y +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 4187f69f6..2d5253dcc 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -42,9 +42,9 @@ CONFIG_SOC_IMX6SL=y CONFIG_SOC_IMX6SX=y CONFIG_SOC_IMX6UL=y CONFIG_SOC_IMX7D=y -CONFIG_SOC_LS1021A=y CONFIG_SOC_VF610=y CONFIG_PCI=y +CONFIG_PCI_MSI=y CONFIG_PCI_IMX6=y CONFIG_SMP=y CONFIG_PREEMPT_VOLUNTARY=y @@ -224,6 +224,7 @@ CONFIG_SOC_CAMERA_OV2640=y CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_DW_HDMI_AHB_AUDIO=m CONFIG_DRM_IMX=y CONFIG_DRM_IMX_FB_HELPER=y CONFIG_DRM_IMX_PARALLEL_DISPLAY=y @@ -315,6 +316,8 @@ CONFIG_MXS_DMA=y CONFIG_FSL_EDMA=y CONFIG_STAGING=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_VF610_ADC=y CONFIG_PWM=y CONFIG_PWM_IMX=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index 03c155f5b..2ae00b09c 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -147,7 +147,12 @@ CONFIG_MEMORY=y CONFIG_ARM_PL172_MPMC=y CONFIG_PWM=y CONFIG_PWM_LPC18XX_SCT=y +CONFIG_IIO=y +CONFIG_MMA7455_I2C=y +CONFIG_IIO_SYSFS_TRIGGER=y CONFIG_PHY_LPC18XX_USB_OTG=y +CONFIG_NVMEM=y +CONFIG_NVMEM_LPC18XX_EEPROM=y CONFIG_EXT2_FS=y # CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index c100b7df5..9f56ca398 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -204,7 +204,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set # CONFIG_ARM_UNWIND is not set CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_UART_8250=y CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_ANSI_CPRNG=y # CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index f69a459f4..1f9ca4737 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -11,10 +11,32 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_NETXBIG=y CONFIG_ARCH_MXC=y -CONFIG_SOC_IMX25=y CONFIG_MACH_IMX27_DT=y +CONFIG_SOC_IMX25=y +CONFIG_ARCH_ORION5X=y +CONFIG_MACH_DB88F5281=y +CONFIG_MACH_RD88F5182=y +CONFIG_MACH_RD88F5182_DT=y +CONFIG_MACH_KUROBOX_PRO=y +CONFIG_MACH_DNS323=y +CONFIG_MACH_TS209=y +CONFIG_MACH_TERASTATION_PRO2=y +CONFIG_MACH_LINKSTATION_PRO=y +CONFIG_MACH_LINKSTATION_LSCHL=y +CONFIG_MACH_LINKSTATION_MINI=y +CONFIG_MACH_LINKSTATION_LS_HGL=y +CONFIG_MACH_TS409=y +CONFIG_MACH_WRT350N_V2=y +CONFIG_MACH_TS78XX=y +CONFIG_MACH_MV2120=y +CONFIG_MACH_D2NET_DT=y +CONFIG_MACH_NET2BIG=y +CONFIG_MACH_MSS2_DT=y +CONFIG_MACH_WNR854T=y +CONFIG_MACH_RD88F5181L_GE=y +CONFIG_MACH_RD88F5181L_FXO=y +CONFIG_MACH_RD88F6183AP_GE=y CONFIG_ARCH_U300=y CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y @@ -38,6 +60,8 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set +CONFIG_NET_DSA=y +CONFIG_NET_SWITCHDEV=y CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y @@ -53,7 +77,6 @@ CONFIG_MTD_CFI_GEOMETRY=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y @@ -66,8 +89,11 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y +CONFIG_NET_DSA_MV88E6060=y +CONFIG_NET_DSA_MV88E6131=y CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_NET_DSA_MV88E6171=y +CONFIG_NET_DSA_MV88E6352=y CONFIG_MV643XX_ETH=y CONFIG_R8169=y CONFIG_MARVELL_PHY=y @@ -92,7 +118,6 @@ CONFIG_I2C_NOMADIK=y CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y @@ -105,17 +130,16 @@ CONFIG_THERMAL=y CONFIG_KIRKWOOD_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y +# CONFIG_ABX500_CORE is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y -CONFIG_SND_KIRKWOOD_SOC_T5325=y CONFIG_SND_SOC_ALC5623=y CONFIG_SND_SIMPLE_CARD=y -# CONFIG_ABX500_CORE is not set -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y @@ -162,8 +186,6 @@ CONFIG_STAGING=y CONFIG_FB_XGI=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -189,7 +211,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_MV_CESA=y CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index cd7b198fc..8e8b2ace9 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -11,6 +11,9 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_CMDLINE_PARTITION=y +CONFIG_ARCH_MULTI_V7=y +# CONFIG_ARCH_MULTI_V5 is not set +# CONFIG_ARCH_MULTI_V4 is not set CONFIG_ARCH_VIRT=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_MVEBU=y @@ -75,7 +78,7 @@ CONFIG_MACH_SPEAR1340=y CONFIG_ARCH_STI=y CONFIG_ARCH_EXYNOS=y CONFIG_EXYNOS5420_MCPM=y -CONFIG_ARCH_SHMOBILE_MULTI=y +CONFIG_ARCH_RENESAS=y CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y CONFIG_ARCH_R8A73A4=y @@ -125,6 +128,7 @@ CONFIG_KEXEC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_QORIQ_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y CONFIG_NEON=y @@ -152,6 +156,7 @@ CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y CONFIG_CAN_DEV=y CONFIG_CAN_AT91=m +CONFIG_CAN_RCAR=m CONFIG_CAN_XILINXCAN=y CONFIG_CAN_MCP251X=y CONFIG_CAN_SUN4I=y @@ -169,6 +174,7 @@ CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y CONFIG_SIMPLE_PM_BUS=y +CONFIG_SUNXI_RSB=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -178,17 +184,21 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_BRCMNAND=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y +CONFIG_SPI_FSL_QUADSPI=m CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_VIRTIO_BLK=y CONFIG_AD525X_DPOT=y CONFIG_AD525X_DPOT_I2C=y CONFIG_ATMEL_TCLIB=y CONFIG_ICS932S401=y CONFIG_ATMEL_SSC=m +CONFIG_QCOM_COINCELL=m CONFIG_APDS9802ALS=y CONFIG_ISL29003=y CONFIG_EEPROM_AT24=y -CONFIG_EEPROM_SUNXI_SID=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_SCSI_MULTI_LUN=y @@ -202,10 +212,12 @@ CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y +CONFIG_VIRTIO_NET=y CONFIG_HIX5HD2_GMAC=y CONFIG_SUN4I_EMAC=y CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_GIANFAR=y CONFIG_IGB=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y @@ -222,6 +234,7 @@ CONFIG_MARVELL_PHY=y CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y CONFIG_MICREL_PHY=y CONFIG_FIXED_PHY=y CONFIG_USB_PEGASUS=y @@ -241,7 +254,7 @@ CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_SPEAR=y CONFIG_KEYBOARD_ST_KEYSCAN=y -CONFIG_KEYBOARD_CROS_EC=y +CONFIG_KEYBOARD_CROS_EC=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_CYAPA=m CONFIG_MOUSE_ELAN_I2C=y @@ -252,8 +265,10 @@ CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SUN4I=y CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_INPUT_MISC=y +CONFIG_INPUT_MAX77693_HAPTIC=m +CONFIG_INPUT_MAX8997_HAPTIC=m CONFIG_INPUT_MPU3050=y -CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_AXP20X_PEK=m CONFIG_INPUT_ADXL34X=m CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y @@ -294,6 +309,8 @@ CONFIG_SERIAL_CONEXANT_DIGICOLOR=y CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y CONFIG_SERIAL_ST_ASC=y CONFIG_SERIAL_ST_ASC_CONSOLE=y +CONFIG_HVC_DRIVER=y +CONFIG_VIRTIO_CONSOLE=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_DAVINCI=y CONFIG_I2C_MUX=y @@ -304,8 +321,10 @@ CONFIG_I2C_AT91=m CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DIGICOLOR=m +CONFIG_I2C_EMEV2=m CONFIG_I2C_GPIO=m CONFIG_I2C_EXYNOS5=y +CONFIG_I2C_IMX=m CONFIG_I2C_MV64XXX=y CONFIG_I2C_RIIC=y CONFIG_I2C_RK3X=y @@ -324,6 +343,7 @@ CONFIG_SPI=y CONFIG_SPI_ATMEL=m CONFIG_SPI_CADENCE=y CONFIG_SPI_DAVINCI=y +CONFIG_SPI_FSL_DSPI=m CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y @@ -340,10 +360,18 @@ CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y CONFIG_SPI_XILINX=y CONFIG_SPI_SPIDEV=y +CONFIG_SPMI=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y +CONFIG_PINCTRL_IPQ8064=y +CONFIG_PINCTRL_MSM8660=y +CONFIG_PINCTRL_MSM8960=y +CONFIG_PINCTRL_MSM8X74=y +CONFIG_PINCTRL_MSM8916=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_PINCTRL_QCOM_SSBI_PMIC=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_DAVINCI=y @@ -365,6 +393,7 @@ CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m CONFIG_CHARGER_MAX14577=m CONFIG_CHARGER_MAX77693=m +CONFIG_CHARGER_MAX8997=m CONFIG_CHARGER_TPS65090=y CONFIG_AXP20X_POWER=m CONFIG_POWER_RESET_AS3722=y @@ -372,10 +401,13 @@ CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_GPIO_RESTART=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_POWER_RESET_RMOBILE=y +CONFIG_POWER_AVS=y +CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_THERMAL=y +CONFIG_SENSORS_PWM_FAN=m +CONFIG_SENSORS_INA2XX=m CONFIG_CPU_THERMAL=y CONFIG_ROCKCHIP_THERMAL=y CONFIG_RCAR_THERMAL=y @@ -385,40 +417,50 @@ CONFIG_EXYNOS_THERMAL=m CONFIG_ST_THERMAL_SYSCFG=y CONFIG_ST_THERMAL_MEMMAP=y CONFIG_WATCHDOG=y +CONFIG_DA9063_WATCHDOG=m CONFIG_XILINX_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_ST_LPC_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y +CONFIG_IMX2_WDT=y CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y +CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_AXP20X=y -CONFIG_MFD_CROS_EC=y +CONFIG_MFD_AXP20X_I2C=m +CONFIG_MFD_AXP20X_RSB=m +CONFIG_MFD_CROS_EC=m CONFIG_MFD_CROS_EC_I2C=m -CONFIG_MFD_CROS_EC_SPI=y +CONFIG_MFD_CROS_EC_SPI=m +CONFIG_MFD_DA9063=m CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77686=y CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX8907=y +CONFIG_MFD_MAX8997=y CONFIG_MFD_RK808=y CONFIG_MFD_PM8921_CORE=y CONFIG_MFD_QCOM_RPM=y +CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_STMPE=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65090=y +CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_AS3722=y -CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_AXP20X=m CONFIG_REGULATOR_BCM590XX=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_FAN53555=y @@ -429,6 +471,7 @@ CONFIG_POWER_RESET_SYSCON=y CONFIG_REGULATOR_MAX14577=m CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_MAX8973=y +CONFIG_REGULATOR_MAX8997=m CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_MAX77693=m CONFIG_REGULATOR_MAX77802=m @@ -439,9 +482,12 @@ CONFIG_REGULATOR_QCOM_RPM=y CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y +CONFIG_REGULATOR_TI_ABB=y CONFIG_REGULATOR_TPS51632=y CONFIG_REGULATOR_TPS62360=y CONFIG_REGULATOR_TPS65090=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65218=y CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TWL4030=y @@ -458,6 +504,7 @@ CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_RCAR_VIN=m CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_RENESAS_JPU=m CONFIG_VIDEO_RENESAS_VSP1=m # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=m @@ -501,13 +548,21 @@ CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=m CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_ATMEL_SOC=m CONFIG_SND_ATMEL_SOC_WM8904=m +CONFIG_SND_SOC_FSL_SAI=m +CONFIG_SND_SOC_ROCKCHIP=m +CONFIG_SND_SOC_ROCKCHIP_SPDIF=m +CONFIG_SND_SOC_ROCKCHIP_MAX98090=m +CONFIG_SND_SOC_ROCKCHIP_RT5645=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_RSRC_CARD=m +CONFIG_SND_SOC_SAMSUNG=m +CONFIG_SND_SOC_SNOW=m +CONFIG_SND_SOC_ODROIDX2=m CONFIG_SND_SOC_TEGRA=m CONFIG_SND_SOC_TEGRA_RT5640=m CONFIG_SND_SOC_TEGRA_WM8753=m @@ -517,6 +572,8 @@ CONFIG_SND_SOC_TEGRA_TRIMSLICE=m CONFIG_SND_SOC_TEGRA_ALC5632=m CONFIG_SND_SOC_TEGRA_MAX98090=m CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_SGTL5000=m +CONFIG_SND_SOC_SPDIF=m CONFIG_SND_SOC_WM8978=m CONFIG_USB=y CONFIG_USB_XHCI_HCD=y @@ -546,7 +603,6 @@ CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MSM_OTG=m CONFIG_USB_MXS_PHY=y -CONFIG_USB_RCAR_PHY=m CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_ETH=m @@ -557,6 +613,7 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_OF_AT91=y +CONFIG_MMC_SDHCI_OF_ESDHC=m CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_SDHCI_TEGRA=y @@ -569,6 +626,7 @@ CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_SDHCI_MSM=y CONFIG_MMC_MVSDIO=y CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y @@ -580,8 +638,11 @@ CONFIG_MMC_SH_MMCIF=y CONFIG_MMC_SUNXI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_CLASS_FLASH=m CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y +CONFIG_LEDS_MAX77693=m +CONFIG_LEDS_MAX8997=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_ONESHOT=y @@ -601,6 +662,7 @@ CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_HYM8563=m CONFIG_RTC_DRV_MAX8907=y +CONFIG_RTC_DRV_MAX8997=m CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_MAX77802=m @@ -613,6 +675,7 @@ CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_EM3027=y +CONFIG_RTC_DRV_DA9063=m CONFIG_RTC_DRV_DIGICOLOR=m CONFIG_RTC_DRV_S5M=m CONFIG_RTC_DRV_S3C=m @@ -628,10 +691,12 @@ CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y +CONFIG_FSL_EDMA=m CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y CONFIG_SH_DMAE=y CONFIG_RCAR_DMAC=y +CONFIG_RENESAS_USB_DMAC=m CONFIG_STE_DMA40=y CONFIG_SIRF_DMA=y CONFIG_TI_EDMA=y @@ -653,14 +718,20 @@ CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_PM=y +CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD=y CONFIG_QCOM_SMD_RPM=y -CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMP2P=y +CONFIG_QCOM_SMSM=y +CONFIG_QCOM_WCNSS_CTRL=m +CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_COMMON_CLK_QCOM=y CONFIG_CHROME_PLATFORMS=y +CONFIG_STAGING_BOARD=y CONFIG_CROS_EC_CHARDEV=m CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_MAX77802=m +CONFIG_COMMON_CLK_RK808=m CONFIG_COMMON_CLK_S2MPS11=m CONFIG_APQ_MMCC_8084=y CONFIG_MSM_GCC_8660=y @@ -684,6 +755,7 @@ CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_TCB=m +CONFIG_PWM_FSL_FTM=m CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_ROCKCHIP=m CONFIG_PWM_SAMSUNG=m @@ -706,6 +778,8 @@ CONFIG_PHY_STIH407_USB=y CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_SUN9I_USB=y CONFIG_PHY_SAMSUNG_USB2=m +CONFIG_NVMEM=y +CONFIG_NVMEM_SUNXI_SID=y CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -732,6 +806,7 @@ CONFIG_CRYPTO_DEV_TEGRA_AES=y CONFIG_CPUFREQ_DT=y CONFIG_KEYSTONE_IRQ=y CONFIG_CRYPTO_DEV_SUN4I_SS=m +CONFIG_CRYPTO_DEV_ROCKCHIP=m CONFIG_ARM_CRYPTO=y CONFIG_CRYPTO_SHA1_ARM=m CONFIG_CRYPTO_SHA1_ARM_NEON=m @@ -746,3 +821,7 @@ CONFIG_CRYPTO_GHASH_ARM_CE=m CONFIG_CRYPTO_DEV_ATMEL_AES=m CONFIG_CRYPTO_DEV_ATMEL_TDES=m CONFIG_CRYPTO_DEV_ATMEL_SHA=m +CONFIG_VIRTIO=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_PCI_LEGACY=y +CONFIG_VIRTIO_MMIO=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 85d10d2e3..a0345e1ce 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -11,6 +11,9 @@ CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V5=y +# CONFIG_ARCH_MULTI_V6 is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MV78XX0=y CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_RD78X00_MASA=y @@ -132,7 +135,6 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_UART_8250=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index 824de4992..af29780ac 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -12,8 +12,29 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_NETXBIG=y -# CONFIG_CPU_FEROCEON_OLD_ID is not set +CONFIG_ARCH_ORION5X=y +CONFIG_MACH_DB88F5281=y +CONFIG_MACH_RD88F5182=y +CONFIG_MACH_RD88F5182_DT=y +CONFIG_MACH_KUROBOX_PRO=y +CONFIG_MACH_DNS323=y +CONFIG_MACH_TS209=y +CONFIG_MACH_TERASTATION_PRO2=y +CONFIG_MACH_LINKSTATION_PRO=y +CONFIG_MACH_LINKSTATION_LSCHL=y +CONFIG_MACH_LINKSTATION_MINI=y +CONFIG_MACH_LINKSTATION_LS_HGL=y +CONFIG_MACH_TS409=y +CONFIG_MACH_WRT350N_V2=y +CONFIG_MACH_TS78XX=y +CONFIG_MACH_MV2120=y +CONFIG_MACH_D2NET_DT=y +CONFIG_MACH_NET2BIG=y +CONFIG_MACH_MSS2_DT=y +CONFIG_MACH_WNR854T=y +CONFIG_MACH_RD88F5181L_GE=y +CONFIG_MACH_RD88F5181L_FXO=y +CONFIG_MACH_RD88F6183AP_GE=y CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -26,6 +47,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_ARM_KIRKWOOD_CPUIDLE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -35,6 +57,8 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set +CONFIG_NET_DSA=y +CONFIG_NET_SWITCHDEV=y CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y @@ -66,8 +90,11 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y +CONFIG_NET_DSA_MV88E6060=y +CONFIG_NET_DSA_MV88E6131=y CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_NET_DSA_MV88E6171=y +CONFIG_NET_DSA_MV88E6352=y CONFIG_MV643XX_ETH=y CONFIG_R8169=y CONFIG_MARVELL_PHY=y @@ -91,7 +118,6 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y @@ -103,16 +129,15 @@ CONFIG_SENSORS_LM85=y CONFIG_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y -CONFIG_SND_KIRKWOOD_SOC_T5325=y CONFIG_SND_SOC_ALC5623=y CONFIG_SND_SIMPLE_CARD=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y @@ -159,8 +184,6 @@ CONFIG_STAGING=y CONFIG_FB_XGI=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -186,7 +209,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_MV_CESA=y CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig index 25ed772df..4f3dfb217 100644 --- a/arch/arm/configs/netwinder_defconfig +++ b/arch/arm/configs/netwinder_defconfig @@ -5,6 +5,7 @@ CONFIG_ARCH_FOOTBRIDGE=y CONFIG_ARCH_NETWINDER=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y +CONFIG_DEPRECATED_PARAM_STRUCT=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=0x301" diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c5e1943e5..d18d6b42f 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -50,6 +50,7 @@ CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y +CONFIG_ARM_KERNMEM_PERMS=y CONFIG_ARM_ERRATA_411920=y CONFIG_ARM_ERRATA_430973=y CONFIG_SMP=y @@ -177,6 +178,7 @@ CONFIG_TI_CPTS=y CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y CONFIG_USB_USBNET=m +CONFIG_USB_NET_SMSC75XX=m CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y @@ -290,24 +292,23 @@ CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y -CONFIG_OMAP2_DSS=m -CONFIG_OMAP5_DSS_HDMI=y -CONFIG_OMAP2_DSS_SDI=y -CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP5_DSS_HDMI=y +CONFIG_FB_OMAP2_DSS_SDI=y +CONFIG_FB_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m -CONFIG_DISPLAY_ENCODER_TFP410=m -CONFIG_DISPLAY_ENCODER_TPD12S015=m -CONFIG_DISPLAY_CONNECTOR_DVI=m -CONFIG_DISPLAY_CONNECTOR_HDMI=m -CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m -CONFIG_DISPLAY_PANEL_DPI=m -CONFIG_DISPLAY_PANEL_DSI_CM=m -CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m -CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m -CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m -CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m -CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m -CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m +CONFIG_FB_OMAP2_ENCODER_TFP410=m +CONFIG_FB_OMAP2_ENCODER_TPD12S015=m +CONFIG_FB_OMAP2_CONNECTOR_DVI=m +CONFIG_FB_OMAP2_CONNECTOR_HDMI=m +CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m +CONFIG_FB_OMAP2_PANEL_DPI=m +CONFIG_FB_OMAP2_PANEL_DSI_CM=m +CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m +CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m +CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m +CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m +CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m +CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y @@ -354,6 +355,11 @@ CONFIG_USB_MUSB_DSPS=m CONFIG_USB_INVENTRA_DMA=y CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_DWC3=m +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_TEST=m CONFIG_AM335X_PHY_USB=y CONFIG_USB_GADGET=m @@ -387,6 +393,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PWM=m +CONFIG_LEDS_PCA963X=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m @@ -449,6 +456,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_SPLIT=y +CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 8099417a9..5876ce7af 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -13,6 +13,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y +CONFIG_ARCH_MULTI_V5=y +# CONFIG_ARCH_MULTI_V6 is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_ORION5X=y CONFIG_ARCH_ORION5X_DT=y CONFIG_MACH_DB88F5281=y @@ -159,7 +162,6 @@ CONFIG_LATENCYTOP=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_UART_8250=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig new file mode 100644 index 000000000..0cb724b5c --- /dev/null +++ b/arch/arm/configs/pxa_defconfig @@ -0,0 +1,783 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=13 +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +CONFIG_SLOB=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_LDM_PARTITION=y +CONFIG_CMDLINE_PARTITION=y +CONFIG_ARCH_PXA=y +CONFIG_MACH_PXA27X_DT=y +CONFIG_MACH_PXA3XX_DT=y +CONFIG_ARCH_LUBBOCK=y +CONFIG_MACH_MAINSTONE=y +CONFIG_MACH_ZYLONITE300=y +CONFIG_MACH_ZYLONITE320=y +CONFIG_MACH_LITTLETON=y +CONFIG_MACH_TAVOREVB=y +CONFIG_MACH_SAAR=y +CONFIG_ARCH_PXA_IDP=y +CONFIG_ARCH_VIPER=y +CONFIG_MACH_ARCOM_ZEUS=y +CONFIG_MACH_BALLOON3=y +CONFIG_MACH_CSB726=y +CONFIG_CSB726_CSB701=y +CONFIG_MACH_ARMCORE=y +CONFIG_MACH_EM_X270=y +CONFIG_MACH_EXEDA=y +CONFIG_MACH_CM_X300=y +CONFIG_MACH_CAPC7117=y +CONFIG_ARCH_GUMSTIX=y +CONFIG_MACH_INTELMOTE2=y +CONFIG_MACH_STARGATE2=y +CONFIG_MACH_XCEP=y +CONFIG_TRIZEPS_PXA=y +CONFIG_MACH_TRIZEPS4WL=y +CONFIG_MACH_LOGICPD_PXA270=y +CONFIG_MACH_PCM027=y +CONFIG_MACH_PCM990_BASEBOARD=y +CONFIG_MACH_COLIBRI=y +CONFIG_MACH_COLIBRI_PXA270_INCOME=y +CONFIG_MACH_COLIBRI300=y +CONFIG_MACH_COLIBRI320=y +CONFIG_MACH_COLIBRI_EVALBOARD=y +CONFIG_MACH_VPAC270=y +CONFIG_MACH_H4700=y +CONFIG_MACH_H5000=y +CONFIG_MACH_HIMALAYA=y +CONFIG_MACH_MAGICIAN=y +CONFIG_MACH_MIOA701=y +CONFIG_PXA_EZX=y +CONFIG_MACH_MP900C=y +CONFIG_ARCH_PXA_PALM=y +CONFIG_MACH_RAUMFELD_RC=y +CONFIG_MACH_RAUMFELD_CONNECTOR=y +CONFIG_MACH_RAUMFELD_SPEAKER=y +CONFIG_PXA_SHARPSL=y +CONFIG_MACH_POODLE=y +CONFIG_MACH_CORGI=y +CONFIG_MACH_SHEPHERD=y +CONFIG_MACH_HUSKY=y +CONFIG_MACH_AKITA=y +CONFIG_MACH_BORZOI=y +CONFIG_MACH_TOSA=y +CONFIG_TOSA_BT=m +CONFIG_TOSA_USE_EXT_KEYCODES=y +CONFIG_MACH_ICONTROL=y +CONFIG_ARCH_PXA_ESERIES=y +CONFIG_MACH_ZIPIT2=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCCARD=m +CONFIG_YENTA=m +CONFIG_PCMCIA_PXA2XX=m +CONFIG_PREEMPT=y +CONFIG_AEABI=y +# CONFIG_COMPACTION is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 ro" +CONFIG_KEXEC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_CPUFREQ_DT=m +CONFIG_ARM_PXA2xx_CPUFREQ=m +CONFIG_CPU_IDLE=y +CONFIG_ARM_CPUIDLE=y +CONFIG_BINFMT_MISC=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_SYN_COOKIES=y +# CONFIG_IPV6 is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_IEEE802154=y +CONFIG_DNS_RESOLVER=y +CONFIG_IRDA=m +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +CONFIG_IRDA_DEBUG=y +CONFIG_IRTTY_SIR=m +CONFIG_PXA_FICP=m +CONFIG_BT=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_CFG80211=m +CONFIG_CFG80211_REG_DEBUG=y +CONFIG_MAC80211=m +CONFIG_RFKILL=y +CONFIG_RFKILL_INPUT=y +CONFIG_RFKILL_GPIO=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_CONNECTOR=y +CONFIG_MTD_REDBOOT_PARTS=m +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0 +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +CONFIG_MTD_REDBOOT_PARTS_READONLY=y +CONFIG_MTD_CMDLINE_PARTS=m +CONFIG_MTD_AFS_PARTS=m +CONFIG_MTD_OF_PARTS=m +CONFIG_MTD_AR7_PARTS=m +CONFIG_MTD_BLOCK=m +CONFIG_NFTL=m +CONFIG_NFTL_RW=y +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_LE_BYTE_SWAP=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_OTP=y +CONFIG_MTD_CFI_AMDSTD=m +CONFIG_MTD_CFI_STAA=m +CONFIG_MTD_RAM=m +CONFIG_MTD_ROM=m +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PXA2XX=m +CONFIG_MTD_M25P80=m +CONFIG_MTD_BLOCK2MTD=y +CONFIG_MTD_DOCG3=m +CONFIG_MTD_NAND=m +CONFIG_MTD_NAND_ECC_BCH=y +CONFIG_MTD_NAND_GPIO=m +CONFIG_MTD_NAND_DISKONCHIP=m +CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y +CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000 +CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y +CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y +CONFIG_MTD_NAND_SHARPSL=m +CONFIG_MTD_NAND_PXA3xx=m +CONFIG_MTD_NAND_CM_X270=m +CONFIG_MTD_NAND_TMIO=m +CONFIG_MTD_NAND_BRCMNAND=m +CONFIG_MTD_NAND_PLATFORM=m +CONFIG_MTD_ONENAND=m +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_GENERIC=m +CONFIG_MTD_SPI_NOR=m +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_BLOCK=y +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=8 +CONFIG_AD525X_DPOT=m +CONFIG_AD525X_DPOT_I2C=m +CONFIG_ICS932S401=m +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_TI_DAC7512=m +CONFIG_EEPROM_AT24=m +CONFIG_SENSORS_LIS3_SPI=m +CONFIG_IDE=m +CONFIG_BLK_DEV_IDECS=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_CHR_DEV_SG=y +CONFIG_ATA=m +CONFIG_SATA_AHCI=m +CONFIG_SATA_AHCI_PLATFORM=m +CONFIG_SATA_MV=m +CONFIG_PATA_PXA=m +CONFIG_PATA_PCMCIA=m +CONFIG_PATA_PLATFORM=m +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_MACB=m +CONFIG_DM9000=m +CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y +CONFIG_IGB=m +CONFIG_KS8851=y +CONFIG_AX88796=m +CONFIG_PCMCIA_PCNET=m +CONFIG_8139TOO=m +CONFIG_R8169=m +CONFIG_SMC91X=m +CONFIG_SMSC911X=m +CONFIG_STMMAC_ETH=m +CONFIG_PHYLIB=y +CONFIG_AT803X_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=m +CONFIG_MICREL_PHY=m +CONFIG_FIXED_PHY=m +CONFIG_MDIO_BITBANG=y +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_MCS7830=m +CONFIG_BRCMFMAC=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_CS=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +CONFIG_RT2X00=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_INPUT_FF_MEMLESS=m +CONFIG_INPUT_POLLDEV=y +CONFIG_INPUT_MATRIXKMAP=y +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_APMPOWER=m +CONFIG_KEYBOARD_ATKBD=m +CONFIG_KEYBOARD_QT1070=m +CONFIG_KEYBOARD_GPIO=m +CONFIG_KEYBOARD_PXA27x=m +CONFIG_KEYBOARD_PXA930_ROTARY=m +CONFIG_KEYBOARD_CROS_EC=m +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_CYAPA=m +CONFIG_MOUSE_ELAN_I2C=m +CONFIG_MOUSE_PXA930_TRKBALL=m +CONFIG_MOUSE_NAVPOINT_PXA27x=m +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_DA9034=m +CONFIG_TOUCHSCREEN_EETI=m +CONFIG_TOUCHSCREEN_FUJITSU=m +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_INEXIO=m +CONFIG_TOUCHSCREEN_HTCPEN=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_UCB1400=m +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_TOUCHIT213=m +CONFIG_TOUCHSCREEN_PCAP=m +CONFIG_TOUCHSCREEN_ST1232=m +CONFIG_INPUT_MISC=y +CONFIG_INPUT_MPU3050=m +CONFIG_INPUT_AXP20X_PEK=m +CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m +CONFIG_INPUT_PCAP=m +CONFIG_INPUT_ADXL34X=m +CONFIG_SERIO=m +CONFIG_SERIO_SA1111=m +CONFIG_LEGACY_PTY_COUNT=8 +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=7 +CONFIG_SERIAL_8250_RUNTIME_UARTS=7 +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_MUX_PCA954x=m +CONFIG_I2C_MUX_PINCTRL=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m +CONFIG_I2C_PXA_SLAVE=y +CONFIG_I2C_XILINX=m +CONFIG_I2C_CROS_EC_TUNNEL=m +CONFIG_SPI_DEBUG=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_CADENCE=m +CONFIG_SPI_GPIO=m +CONFIG_SPI_PXA2XX=m +CONFIG_SPI_ROCKCHIP=m +CONFIG_SPI_XILINX=m +CONFIG_SPI_SPIDEV=m +CONFIG_PPS=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_DWAPB=m +CONFIG_GPIO_GENERIC_PLATFORM=m +CONFIG_GPIO_MAX732X=m +CONFIG_GPIO_PCA953X=m +CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_PALMAS=y +CONFIG_GPIO_TPS6586X=y +CONFIG_GPIO_TPS65910=y +CONFIG_GPIO_MAX7301=m +CONFIG_POWER_SUPPLY_DEBUG=y +CONFIG_PDA_POWER=m +CONFIG_BATTERY_SBS=m +CONFIG_BATTERY_DA9030=m +CONFIG_BATTERY_MAX17040=m +CONFIG_BATTERY_MAX17042=m +CONFIG_CHARGER_MAX14577=m +CONFIG_CHARGER_MAX77693=m +CONFIG_CHARGER_TPS65090=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_MAX6650=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM95245=m +CONFIG_SENSORS_NTC_THERMISTOR=m +CONFIG_THERMAL=m +CONFIG_WATCHDOG=y +CONFIG_XILINX_WATCHDOG=m +CONFIG_SA1100_WATCHDOG=m +CONFIG_MFD_AS3711=y +CONFIG_MFD_BCM590XX=m +CONFIG_MFD_AXP20X=y +CONFIG_MFD_CROS_EC=m +CONFIG_MFD_CROS_EC_I2C=m +CONFIG_MFD_CROS_EC_SPI=m +CONFIG_MFD_ASIC3=y +CONFIG_PMIC_DA903X=y +CONFIG_HTC_EGPIO=y +CONFIG_HTC_PASIC3=m +CONFIG_MFD_MAX14577=y +CONFIG_MFD_MAX77693=y +CONFIG_MFD_MAX8907=m +CONFIG_EZX_PCAP=y +CONFIG_UCB1400_CORE=m +CONFIG_MFD_PM8921_CORE=m +CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_PALMAS=y +CONFIG_MFD_TPS65090=y +CONFIG_MFD_TPS6586X=y +CONFIG_MFD_TPS65910=y +CONFIG_MFD_T7L66XB=y +CONFIG_MFD_TC6387XB=y +CONFIG_MFD_TC6393XB=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_DEBUG=y +CONFIG_REGULATOR_FIXED_VOLTAGE=m +CONFIG_REGULATOR_USERSPACE_CONSUMER=m +CONFIG_REGULATOR_ACT8865=m +CONFIG_REGULATOR_AS3711=m +CONFIG_REGULATOR_AXP20X=m +CONFIG_REGULATOR_BCM590XX=m +CONFIG_REGULATOR_DA903X=m +CONFIG_REGULATOR_DA9210=m +CONFIG_REGULATOR_FAN53555=m +CONFIG_REGULATOR_GPIO=m +CONFIG_REGULATOR_MAX14577=m +CONFIG_REGULATOR_MAX8660=m +CONFIG_REGULATOR_MAX8907=m +CONFIG_REGULATOR_MAX8973=m +CONFIG_REGULATOR_MAX77693=m +CONFIG_REGULATOR_PALMAS=m +CONFIG_REGULATOR_PCAP=m +CONFIG_REGULATOR_PWM=m +CONFIG_REGULATOR_S2MPS11=m +CONFIG_REGULATOR_S5M8767=m +CONFIG_REGULATOR_TPS51632=m +CONFIG_REGULATOR_TPS62360=m +CONFIG_REGULATOR_TPS65090=m +CONFIG_REGULATOR_TPS6586X=m +CONFIG_REGULATOR_TPS65910=m +CONFIG_MEDIA_SUPPORT=m +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_PXA27x=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_SOC_CAMERA_MT9M111=m +CONFIG_DRM=m +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_TILEBLITTING=y +CONFIG_FB_PXA_OVERLAY=y +CONFIG_FB_PXA_PARAMETERS=y +CONFIG_PXA3XX_GCU=m +CONFIG_FB_MBX=m +CONFIG_FB_VIRTUAL=m +CONFIG_FB_SIMPLE=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CORGI=m +CONFIG_LCD_PLATFORM=m +CONFIG_LCD_TOSA=m +CONFIG_BACKLIGHT_PWM=m +CONFIG_BACKLIGHT_TOSA=m +CONFIG_FRAMEBUFFER_CONSOLE=m +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_LOGO=y +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +CONFIG_SND_PXA2XX_AC97=m +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=m +CONFIG_SND_ATMEL_SOC=m +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_PXA2XX_SOC_CORGI=m +CONFIG_SND_PXA2XX_SOC_SPITZ=m +CONFIG_SND_PXA2XX_SOC_Z2=m +CONFIG_SND_PXA2XX_SOC_POODLE=m +CONFIG_SND_PXA2XX_SOC_TOSA=m +CONFIG_SND_PXA2XX_SOC_E740=m +CONFIG_SND_PXA2XX_SOC_E750=m +CONFIG_SND_PXA2XX_SOC_E800=m +CONFIG_SND_PXA2XX_SOC_EM_X270=m +CONFIG_SND_PXA2XX_SOC_PALM27X=y +CONFIG_SND_SOC_ZYLONITE=m +CONFIG_SND_SOC_RAUMFELD=m +CONFIG_SND_PXA2XX_SOC_HX4700=m +CONFIG_SND_PXA2XX_SOC_MAGICIAN=m +CONFIG_SND_PXA2XX_SOC_MIOA701=m +CONFIG_SND_PXA2XX_SOC_IMOTE2=m +CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_WM8978=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_SOUND_PRIME=m +CONFIG_HID=m +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GYRATION=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_LOGITECH=m +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_NTRIG=m +CONFIG_HID_PANTHERLORD=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_GREENASIA=m +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_HID_TOPSEED=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_HID_ZEROPLUS=m +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB=m +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=m +CONFIG_USB_XHCI_HCD=m +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_EHCI_HCD_PLATFORM=m +CONFIG_USB_ISP116X_HCD=m +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_OHCI_HCD_PLATFORM=m +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m +CONFIG_USB_R8A66597_HCD=m +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_STORAGE=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_DWC3=m +CONFIG_USB_DWC2=m +CONFIG_USB_CHIPIDEA=m +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=m +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_GPIO_VBUS=y +CONFIG_USB_ISP1301=m +CONFIG_USB_GADGET=m +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_PXA25X=m +CONFIG_USB_PXA27X=m +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +# CONFIG_USB_ETH_RNDIS is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_MMC=m +CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_SDIO_UART=m +CONFIG_MMC_PXA=m +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_PLTFM=m +CONFIG_MMC_TMIO=m +CONFIG_MMC_DW=m +CONFIG_MMC_DW_EXYNOS=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_DA903X=m +CONFIG_LEDS_PWM=m +CONFIG_LEDS_LT3593=m +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_ONESHOT=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DEBUG=y +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_MAX8907=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_PALMAS=m +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_TPS6586X=m +CONFIG_RTC_DRV_TPS65910=m +CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_S5M=m +CONFIG_RTC_DRV_V3020=m +CONFIG_RTC_DRV_PXA=m +CONFIG_RTC_DRV_PCAP=m +CONFIG_DMADEVICES=y +CONFIG_PXA_DMA=y +CONFIG_DW_DMAC=m +CONFIG_UIO=y +CONFIG_CROS_EC_CHARDEV=m +CONFIG_COMMON_CLK_S2MPS11=m +CONFIG_PM_DEVFREQ=y +CONFIG_EXTCON=y +CONFIG_MEMORY=y +CONFIG_PWM=y +CONFIG_PWM_PXA=m +CONFIG_PHY_SAMSUNG_USB2=m +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_REISERFS_FS=m +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_XFS_FS=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_FSCACHE=y +CONFIG_FSCACHE_STATS=y +CONFIG_CACHEFILES=y +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15" +CONFIG_NTFS_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=y +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=1 +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RUBIN=y +CONFIG_UBIFS_FS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_ROMFS_FS=m +CONFIG_NFS_FS=m +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=m +CONFIG_NFS_FSCACHE=y +CONFIG_NFSD=m +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_UTF8=m +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_FRAME_WARN=0 +CONFIG_STRIP_ASM_SYMS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_TIMER_STATS=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_DEBUG_USER=y +CONFIG_SECURITY=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM=m +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM=m +CONFIG_CRC_CCITT=y +CONFIG_CRC_T10DIF=m +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_FONT_6x11=y +CONFIG_FONT_MINI_4x6=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index ee54a706e..7bff7bf24 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -1,8 +1,10 @@ CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y @@ -22,10 +24,10 @@ CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y CONFIG_SMP=y +CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y CONFIG_CLEANCACHE=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y @@ -78,10 +80,14 @@ CONFIG_USB_USBNET=y # CONFIG_USB_NET_ZAURUS is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_PMIC8XXX=y # CONFIG_MOUSE_PS2 is not set CONFIG_INPUT_JOYSTICK=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y +CONFIG_INPUT_PM8XXX_VIBRATOR=y +CONFIG_INPUT_PMIC8XXX_PWRKEY=y CONFIG_INPUT_UINPUT=y CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set @@ -99,13 +105,18 @@ CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y CONFIG_PINCTRL_MSM8960=y CONFIG_PINCTRL_MSM8X74=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_PINCTRL_QCOM_SSBI_PMIC=y CONFIG_GPIOLIB=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y +CONFIG_CHARGER_QCOM_SMBB=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y CONFIG_THERMAL=y +CONFIG_MFD_PM8921_CORE=y CONFIG_MFD_QCOM_RPM=y +CONFIG_MFD_SPMI_PMIC=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_QCOM_RPM=y @@ -136,6 +147,7 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_MSM=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PM8XXX=y CONFIG_DMADEVICES=y CONFIG_QCOM_BAM_DMA=y CONFIG_STAGING=y @@ -149,9 +161,9 @@ CONFIG_MSM_MMCC_8974=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_PM=y +CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD=y CONFIG_QCOM_SMD_RPM=y -CONFIG_QCOM_SMEM=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index 1da5d9e48..93efdcfcf 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -1,19 +1,29 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ_FULL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_REALVIEW=y +CONFIG_REALVIEW_DT=y CONFIG_MACH_REALVIEW_EB=y +CONFIG_REALVIEW_EB_ARM1136=y +CONFIG_REALVIEW_EB_ARM1176=y +CONFIG_REALVIEW_EB_A9MP=y CONFIG_REALVIEW_EB_ARM11MP=y +CONFIG_REALVIEW_EB_ARM11MP_REVB=y CONFIG_MACH_REALVIEW_PB11MP=y +CONFIG_MACH_REALVIEW_PB1176=y +CONFIG_MACH_REALVIEW_PBA8=y +CONFIG_MACH_REALVIEW_PBX=y CONFIG_SMP=y -CONFIG_HOTPLUG_CPU=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -30,28 +40,24 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y +CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP=y CONFIG_ARM_CHARLCD=y CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_SMSC_PHY=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_VERSATILE=y @@ -70,8 +76,8 @@ CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y # CONFIG_SND_DRIVERS is not set CONFIG_SND_ARMAACI=y -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_ISP1760=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y @@ -87,17 +93,13 @@ CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index d02e9d911..8f56fb3ff 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -1,18 +1,26 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_REALVIEW=y +CONFIG_REALVIEW_DT=y CONFIG_MACH_REALVIEW_EB=y +CONFIG_REALVIEW_EB_ARM1136=y +CONFIG_REALVIEW_EB_ARM1176=y +CONFIG_REALVIEW_EB_A9MP=y CONFIG_REALVIEW_EB_ARM11MP=y +CONFIG_REALVIEW_EB_ARM11MP_REVB=y CONFIG_MACH_REALVIEW_PB11MP=y CONFIG_MACH_REALVIEW_PB1176=y +CONFIG_MACH_REALVIEW_PBA8=y +CONFIG_MACH_REALVIEW_PBX=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -29,28 +37,24 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y +CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP=y CONFIG_ARM_CHARLCD=y CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_SMSC_PHY=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_VERSATILE=y @@ -69,8 +73,8 @@ CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y # CONFIG_SND_DRIVERS is not set CONFIG_SND_ARMAACI=y -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_ISP1760=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y @@ -86,17 +90,13 @@ CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index e2f9fa5bb..e0f66936a 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -5,6 +5,8 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V6=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_S3C64XX=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_MACH_SMDK6400=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 63f7e6ce6..c11bab735 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -129,6 +129,9 @@ CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_SAMA5D4_WATCHDOG=y CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 3aef019c0..969738324 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -2,14 +2,13 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y CONFIG_SLAB=y -CONFIG_ARCH_SHMOBILE_MULTI=y +CONFIG_ARCH_RENESAS=y CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y CONFIG_ARCH_R8A73A4=y @@ -53,6 +52,8 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y +CONFIG_CAN=y +CONFIG_CAN_RCAR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -99,6 +100,7 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=20 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_EMEV2=y CONFIG_I2C_GPIO=y CONFIG_I2C_RIIC=y CONFIG_I2C_SH_MOBILE=y @@ -135,6 +137,7 @@ CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_PLATFORM=y CONFIG_VIDEO_RCAR_VIN=y CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_RENESAS_JPU=y CONFIG_VIDEO_RENESAS_VSP1=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=y @@ -150,6 +153,7 @@ CONFIG_FB_SH_MOBILE_MERAM=y # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_AS3711=y +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y @@ -163,7 +167,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_R8A66597_HCD=y CONFIG_USB_RENESAS_USBHS=y -CONFIG_USB_RCAR_PHY=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=y CONFIG_USB_ETH=y @@ -177,9 +180,13 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_RX8581=y +CONFIG_RTC_DRV_DA9063=y CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_RCAR_DMAC=y +CONFIG_RENESAS_USB_DMAC=y +CONFIG_STAGING=y +CONFIG_STAGING_BOARD=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AK8975=y @@ -199,6 +206,7 @@ CONFIG_NFS_V4_1=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index 8128b93ed..f7f4e2e3c 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -36,7 +36,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y -CONFIG_IPV6=y CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_VLAN_8021Q=y CONFIG_VLAN_8021Q_GVRP=y @@ -57,7 +56,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_STMMAC_ETH=y -CONFIG_DWMAC_SOCFPGA=y CONFIG_MICREL_PHY=y CONFIG_INPUT_EVDEV=y # CONFIG_SERIO_SERPORT is not set @@ -83,7 +81,8 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_USB=y CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_GADGET=y CONFIG_MMC=y CONFIG_MMC_DW=y CONFIG_FPGA=y @@ -92,7 +91,6 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT3_FS=y -CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_NTFS_RW=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index 4725fab56..ec5250547 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -54,6 +54,8 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_DMADEVICES=y +CONFIG_STM32_DMA=y # CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index b503a8944..a9a81a714 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -11,14 +11,12 @@ CONFIG_SMP=y CONFIG_NR_CPUS=8 CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_FREQ=y CONFIG_CPUFREQ_DT=y CONFIG_VFP=y CONFIG_NEON=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -37,7 +35,6 @@ CONFIG_CAN_SUN4I=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_EEPROM_SUNXI_SID=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_AHCI_SUNXI=y @@ -61,13 +58,12 @@ CONFIG_STMMAC_ETH=y # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_KEYBOARD_SUN4I_LRADC=y # CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_AXP20X_PEK=y CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_KEYBOARD_SUN4I_LRADC=y CONFIG_TOUCHSCREEN_SUN4I=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_AXP20X_PEK=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=8 @@ -90,6 +86,8 @@ CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MFD_AXP20X=y +CONFIG_MFD_AXP20X_I2C=y +CONFIG_MFD_AXP20X_RSB=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y @@ -124,6 +122,8 @@ CONFIG_PWM=y CONFIG_PWM_SUN4I=y CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_SUN9I_USB=y +CONFIG_NVMEM=y +CONFIG_NVMEM_SUNXI_SID=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index ea49d3756..295408ea9 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -1,13 +1,15 @@ # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_VERSATILE=y -CONFIG_MACH_VERSATILE_AB=y CONFIG_AEABI=y CONFIG_OABI_COMPAT=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -47,9 +49,12 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_VERSATILE=y +CONFIG_SPI=y CONFIG_GPIOLIB=y CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set +CONFIG_MFD_SYSCON=y CONFIG_FB=y CONFIG_FB_ARMCLCD=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -59,13 +64,15 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_ARMAACI=m CONFIG_MMC=y -CONFIG_MMC_ARMMMCI=m +CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y -CONFIG_LEDS_VERSATILE=y +CONFIG_LEDS_SYSCON=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y CONFIG_EXT2_FS=y CONFIG_VFAT_FS=m CONFIG_JFFS2_FS=y @@ -82,6 +89,5 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_UART_PL01X=y CONFIG_FONTS=y CONFIG_FONT_ACORN_8x8=y diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig index b200bb0fe..ab683fbbb 100644 --- a/arch/arm/configs/zx_defconfig +++ b/arch/arm/configs/zx_defconfig @@ -83,7 +83,6 @@ CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y CONFIG_EXT2_FS=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index b445a5d56..89a3a3e59 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -364,7 +364,7 @@ static struct crypto_alg aes_algs[] = { { .cra_blkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ce_aes_setkey, .encrypt = ecb_encrypt, .decrypt = ecb_decrypt, @@ -441,7 +441,7 @@ static struct crypto_alg aes_algs[] = { { .cra_ablkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ablk_set_key, .encrypt = ablk_encrypt, .decrypt = ablk_decrypt, diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index bd425302c..16da6380e 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -3,6 +3,7 @@ generic-y += bitsperlong.h generic-y += cputime.h generic-y += current.h +generic-y += early_ioremap.h generic-y += emergency-restart.h generic-y += errno.h generic-y += exec.h diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index 7da5503c0..e08d15184 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -117,6 +117,7 @@ static inline u32 gic_read_iar(void) u32 irqstat; asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat)); + dsb(sy); return irqstat; } diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index 3ff5642d9..112cc1a5d 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -60,38 +60,11 @@ extern void arm_heavy_mb(void); #define dma_wmb() barrier() #endif -#ifndef CONFIG_SMP -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#else -#define smp_mb() dmb(ish) -#define smp_rmb() smp_mb() -#define smp_wmb() dmb(ishst) -#endif - -#define smp_store_release(p, v) \ -do { \ - compiletime_assert_atomic_type(*p); \ - smp_mb(); \ - WRITE_ONCE(*p, v); \ -} while (0) - -#define smp_load_acquire(p) \ -({ \ - typeof(*p) ___p1 = READ_ONCE(*p); \ - compiletime_assert_atomic_type(*p); \ - smp_mb(); \ - ___p1; \ -}) - -#define read_barrier_depends() do { } while(0) -#define smp_read_barrier_depends() do { } while(0) - -#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0) +#define __smp_mb() dmb(ish) +#define __smp_rmb() __smp_mb() +#define __smp_wmb() dmb(ishst) -#define smp_mb__before_atomic() smp_mb() -#define smp_mb__after_atomic() smp_mb() +#include <asm-generic/barrier.h> #endif /* !__ASSEMBLY__ */ #endif /* __ASM_BARRIER_H */ diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h index e7335a921..4e6e88a6b 100644 --- a/arch/arm/include/asm/bug.h +++ b/arch/arm/include/asm/bug.h @@ -5,8 +5,6 @@ #include <linux/types.h> #include <asm/opcodes.h> -#ifdef CONFIG_BUG - /* * Use a suitable undefined instruction to use for ARM/Thumb2 bug handling. * We need to be careful not to conflict with those used by other modules and @@ -47,7 +45,7 @@ do { \ unreachable(); \ } while (0) -#else /* not CONFIG_DEBUG_BUGVERBOSE */ +#else #define __BUG(__file, __line, __value) \ do { \ @@ -57,7 +55,6 @@ do { \ #endif /* CONFIG_DEBUG_BUGVERBOSE */ #define HAVE_ARCH_BUG -#endif /* CONFIG_BUG */ #include <asm-generic/bug.h> diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h index 0f8424924..3848259be 100644 --- a/arch/arm/include/asm/cpuidle.h +++ b/arch/arm/include/asm/cpuidle.h @@ -30,7 +30,7 @@ static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev, struct device_node; struct cpuidle_ops { - int (*suspend)(int cpu, unsigned long arg); + int (*suspend)(unsigned long arg); int (*init)(struct device_node *, int cpu); }; diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 85e374f87..b23c6c81c 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -228,10 +228,26 @@ static inline int cpu_is_xsc3(void) } #endif -#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) -#define cpu_is_xscale() 0 +#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) && \ + !defined(CONFIG_CPU_MOHAWK) +#define cpu_is_xscale_family() 0 #else -#define cpu_is_xscale() 1 +static inline int cpu_is_xscale_family(void) +{ + unsigned int id; + id = read_cpuid_id() & 0xffffe000; + + switch (id) { + case 0x69052000: /* Intel XScale 1 */ + case 0x69054000: /* Intel XScale 2 */ + case 0x69056000: /* Intel XScale 3 */ + case 0x56056000: /* Marvell XScale 3 */ + case 0x56158000: /* Marvell Mohawk */ + return 1; + } + + return 0; +} #endif /* diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index 662c7bd06..e1f07764b 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -5,9 +5,9 @@ #include <asm/compiler.h> /* - * The semantics of do_div() are: + * The semantics of __div64_32() are: * - * uint32_t do_div(uint64_t *n, uint32_t base) + * uint32_t __div64_32(uint64_t *n, uint32_t base) * { * uint32_t remainder = *n % base; * *n = *n / base; @@ -16,8 +16,9 @@ * * In other words, a 64-bit dividend with a 32-bit divisor producing * a 64-bit result and a 32-bit remainder. To accomplish this optimally - * we call a special __do_div64 helper with completely non standard - * calling convention for arguments and results (beware). + * we override the generic version in lib/div64.c to call our __do_div64 + * assembly implementation with completely non standard calling convention + * for arguments and results (beware). */ #ifdef __ARMEB__ @@ -28,199 +29,101 @@ #define __xh "r1" #endif -#define __do_div_asm(n, base) \ -({ \ - register unsigned int __base asm("r4") = base; \ - register unsigned long long __n asm("r0") = n; \ - register unsigned long long __res asm("r2"); \ - register unsigned int __rem asm(__xh); \ - asm( __asmeq("%0", __xh) \ - __asmeq("%1", "r2") \ - __asmeq("%2", "r0") \ - __asmeq("%3", "r4") \ - "bl __do_div64" \ - : "=r" (__rem), "=r" (__res) \ - : "r" (__n), "r" (__base) \ - : "ip", "lr", "cc"); \ - n = __res; \ - __rem; \ -}) - -#if __GNUC__ < 4 || !defined(CONFIG_AEABI) +static inline uint32_t __div64_32(uint64_t *n, uint32_t base) +{ + register unsigned int __base asm("r4") = base; + register unsigned long long __n asm("r0") = *n; + register unsigned long long __res asm("r2"); + register unsigned int __rem asm(__xh); + asm( __asmeq("%0", __xh) + __asmeq("%1", "r2") + __asmeq("%2", "r0") + __asmeq("%3", "r4") + "bl __do_div64" + : "=r" (__rem), "=r" (__res) + : "r" (__n), "r" (__base) + : "ip", "lr", "cc"); + *n = __res; + return __rem; +} +#define __div64_32 __div64_32 + +#if !defined(CONFIG_AEABI) /* - * gcc versions earlier than 4.0 are simply too problematic for the - * optimized implementation below. First there is gcc PR 15089 that - * tend to trig on more complex constructs, spurious .global __udivsi3 - * are inserted even if none of those symbols are referenced in the - * generated code, and those gcc versions are not able to do constant - * propagation on long long values anyway. + * In OABI configurations, some uses of the do_div function + * cause gcc to run out of registers. To work around that, + * we can force the use of the out-of-line version for + * configurations that build a OABI kernel. */ -#define do_div(n, base) __do_div_asm(n, base) - -#elif __GNUC__ >= 4 +#define do_div(n, base) __div64_32(&(n), base) -#include <asm/bug.h> +#else /* - * If the divisor happens to be constant, we determine the appropriate - * inverse at compile time to turn the division into a few inline - * multiplications instead which is much faster. And yet only if compiling - * for ARMv4 or higher (we need umull/umlal) and if the gcc version is - * sufficiently recent to perform proper long long constant propagation. - * (It is unfortunate that gcc doesn't perform all this internally.) + * gcc versions earlier than 4.0 are simply too problematic for the + * __div64_const32() code in asm-generic/div64.h. First there is + * gcc PR 15089 that tend to trig on more complex constructs, spurious + * .global __udivsi3 are inserted even if none of those symbols are + * referenced in the generated code, and those gcc versions are not able + * to do constant propagation on long long values anyway. */ -#define do_div(n, base) \ -({ \ - unsigned int __r, __b = (base); \ - if (!__builtin_constant_p(__b) || __b == 0 || \ - (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) { \ - /* non-constant divisor (or zero): slow path */ \ - __r = __do_div_asm(n, __b); \ - } else if ((__b & (__b - 1)) == 0) { \ - /* Trivial: __b is constant and a power of 2 */ \ - /* gcc does the right thing with this code. */ \ - __r = n; \ - __r &= (__b - 1); \ - n /= __b; \ - } else { \ - /* Multiply by inverse of __b: n/b = n*(p/b)/p */ \ - /* We rely on the fact that most of this code gets */ \ - /* optimized away at compile time due to constant */ \ - /* propagation and only a couple inline assembly */ \ - /* instructions should remain. Better avoid any */ \ - /* code construct that might prevent that. */ \ - unsigned long long __res, __x, __t, __m, __n = n; \ - unsigned int __c, __p, __z = 0; \ - /* preserve low part of n for reminder computation */ \ - __r = __n; \ - /* determine number of bits to represent __b */ \ - __p = 1 << __div64_fls(__b); \ - /* compute __m = ((__p << 64) + __b - 1) / __b */ \ - __m = (~0ULL / __b) * __p; \ - __m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b; \ - /* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */ \ - __x = ~0ULL / __b * __b - 1; \ - __res = (__m & 0xffffffff) * (__x & 0xffffffff); \ - __res >>= 32; \ - __res += (__m & 0xffffffff) * (__x >> 32); \ - __t = __res; \ - __res += (__x & 0xffffffff) * (__m >> 32); \ - __t = (__res < __t) ? (1ULL << 32) : 0; \ - __res = (__res >> 32) + __t; \ - __res += (__m >> 32) * (__x >> 32); \ - __res /= __p; \ - /* Now sanitize and optimize what we've got. */ \ - if (~0ULL % (__b / (__b & -__b)) == 0) { \ - /* those cases can be simplified with: */ \ - __n /= (__b & -__b); \ - __m = ~0ULL / (__b / (__b & -__b)); \ - __p = 1; \ - __c = 1; \ - } else if (__res != __x / __b) { \ - /* We can't get away without a correction */ \ - /* to compensate for bit truncation errors. */ \ - /* To avoid it we'd need an additional bit */ \ - /* to represent __m which would overflow it. */ \ - /* Instead we do m=p/b and n/b=(n*m+m)/p. */ \ - __c = 1; \ - /* Compute __m = (__p << 64) / __b */ \ - __m = (~0ULL / __b) * __p; \ - __m += ((~0ULL % __b + 1) * __p) / __b; \ - } else { \ - /* Reduce __m/__p, and try to clear bit 31 */ \ - /* of __m when possible otherwise that'll */ \ - /* need extra overflow handling later. */ \ - unsigned int __bits = -(__m & -__m); \ - __bits |= __m >> 32; \ - __bits = (~__bits) << 1; \ - /* If __bits == 0 then setting bit 31 is */ \ - /* unavoidable. Simply apply the maximum */ \ - /* possible reduction in that case. */ \ - /* Otherwise the MSB of __bits indicates the */ \ - /* best reduction we should apply. */ \ - if (!__bits) { \ - __p /= (__m & -__m); \ - __m /= (__m & -__m); \ - } else { \ - __p >>= __div64_fls(__bits); \ - __m >>= __div64_fls(__bits); \ - } \ - /* No correction needed. */ \ - __c = 0; \ - } \ - /* Now we have a combination of 2 conditions: */ \ - /* 1) whether or not we need a correction (__c), and */ \ - /* 2) whether or not there might be an overflow in */ \ - /* the cross product (__m & ((1<<63) | (1<<31))) */ \ - /* Select the best insn combination to perform the */ \ - /* actual __m * __n / (__p << 64) operation. */ \ - if (!__c) { \ - asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" \ - "mov %Q0, #0" \ - : "=&r" (__res) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \ - __res = __m; \ - asm ( "umlal %Q0, %R0, %Q1, %Q2\n\t" \ - "mov %Q0, #0" \ - : "+&r" (__res) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } else { \ - asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" \ - "cmn %Q0, %Q1\n\t" \ - "adcs %R0, %R0, %R1\n\t" \ - "adc %Q0, %3, #0" \ - : "=&r" (__res) \ - : "r" (__m), "r" (__n), "r" (__z) \ - : "cc" ); \ - } \ - if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \ - asm ( "umlal %R0, %Q0, %R1, %Q2\n\t" \ - "umlal %R0, %Q0, %Q1, %R2\n\t" \ - "mov %R0, #0\n\t" \ - "umlal %Q0, %R0, %R1, %R2" \ - : "+&r" (__res) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } else { \ - asm ( "umlal %R0, %Q0, %R2, %Q3\n\t" \ - "umlal %R0, %1, %Q2, %R3\n\t" \ - "mov %R0, #0\n\t" \ - "adds %Q0, %1, %Q0\n\t" \ - "adc %R0, %R0, #0\n\t" \ - "umlal %Q0, %R0, %R2, %R3" \ - : "+&r" (__res), "+&r" (__z) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } \ - __res /= __p; \ - /* The reminder can be computed with 32-bit regs */ \ - /* only, and gcc is good at that. */ \ - { \ - unsigned int __res0 = __res; \ - unsigned int __b0 = __b; \ - __r -= __res0 * __b0; \ - } \ - /* BUG_ON(__r >= __b || __res * __b + __r != n); */ \ - n = __res; \ - } \ - __r; \ -}) - -/* our own fls implementation to make sure constant propagation is fine */ -#define __div64_fls(bits) \ -({ \ - unsigned int __left = (bits), __nr = 0; \ - if (__left & 0xffff0000) __nr += 16, __left >>= 16; \ - if (__left & 0x0000ff00) __nr += 8, __left >>= 8; \ - if (__left & 0x000000f0) __nr += 4, __left >>= 4; \ - if (__left & 0x0000000c) __nr += 2, __left >>= 2; \ - if (__left & 0x00000002) __nr += 1; \ - __nr; \ -}) + +#define __div64_const32_is_OK (__GNUC__ >= 4) + +static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias) +{ + unsigned long long res; + unsigned int tmp = 0; + + if (!bias) { + asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" + "mov %Q0, #0" + : "=&r" (res) + : "r" (m), "r" (n) + : "cc"); + } else if (!(m & ((1ULL << 63) | (1ULL << 31)))) { + res = m; + asm ( "umlal %Q0, %R0, %Q1, %Q2\n\t" + "mov %Q0, #0" + : "+&r" (res) + : "r" (m), "r" (n) + : "cc"); + } else { + asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" + "cmn %Q0, %Q1\n\t" + "adcs %R0, %R0, %R1\n\t" + "adc %Q0, %3, #0" + : "=&r" (res) + : "r" (m), "r" (n), "r" (tmp) + : "cc"); + } + + if (!(m & ((1ULL << 63) | (1ULL << 31)))) { + asm ( "umlal %R0, %Q0, %R1, %Q2\n\t" + "umlal %R0, %Q0, %Q1, %R2\n\t" + "mov %R0, #0\n\t" + "umlal %Q0, %R0, %R1, %R2" + : "+&r" (res) + : "r" (m), "r" (n) + : "cc"); + } else { + asm ( "umlal %R0, %Q0, %R2, %Q3\n\t" + "umlal %R0, %1, %Q2, %R3\n\t" + "mov %R0, #0\n\t" + "adds %Q0, %1, %Q0\n\t" + "adc %R0, %R0, #0\n\t" + "umlal %Q0, %R0, %R2, %R3" + : "+&r" (res), "+&r" (tmp) + : "r" (m), "r" (n) + : "cc"); + } + + return res; +} +#define __arch_xprod_64 __arch_xprod_64 + +#include <asm-generic/div64.h> #endif diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index ccb3aa646..6ad1ceda6 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -41,13 +41,6 @@ static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops) #define HAVE_ARCH_DMA_SUPPORTED 1 extern int dma_supported(struct device *dev, u64 mask); -/* - * Note that while the generic code provides dummy dma_{alloc,free}_noncoherent - * implementations, we don't provide a dma_cache_sync function so drivers using - * this API are highlighted with build warnings. - */ -#include <asm-generic/dma-mapping-common.h> - #ifdef __arch_page_to_dma #error Please update to __arch_pfn_to_dma #endif diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h new file mode 100644 index 000000000..e0eea72de --- /dev/null +++ b/arch/arm/include/asm/efi.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_EFI_H +#define __ASM_ARM_EFI_H + +#include <asm/cacheflush.h> +#include <asm/cachetype.h> +#include <asm/early_ioremap.h> +#include <asm/fixmap.h> +#include <asm/highmem.h> +#include <asm/mach/map.h> +#include <asm/mmu_context.h> +#include <asm/pgtable.h> + +#ifdef CONFIG_EFI +void efi_init(void); + +int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md); + +#define efi_call_virt(f, ...) \ +({ \ + efi_##f##_t *__f; \ + efi_status_t __s; \ + \ + efi_virtmap_load(); \ + __f = efi.systab->runtime->f; \ + __s = __f(__VA_ARGS__); \ + efi_virtmap_unload(); \ + __s; \ +}) + +#define __efi_call_virt(f, ...) \ +({ \ + efi_##f##_t *__f; \ + \ + efi_virtmap_load(); \ + __f = efi.systab->runtime->f; \ + __f(__VA_ARGS__); \ + efi_virtmap_unload(); \ +}) + +static inline void efi_set_pgd(struct mm_struct *mm) +{ + check_and_switch_context(mm, NULL); +} + +void efi_virtmap_load(void); +void efi_virtmap_unload(void); + +#else +#define efi_init() +#endif /* CONFIG_EFI */ + +/* arch specific definitions used by the stub code */ + +#define efi_call_early(f, ...) sys_table_arg->boottime->f(__VA_ARGS__) + +/* + * A reasonable upper bound for the uncompressed kernel size is 32 MBytes, + * so we will reserve that amount of memory. We have no easy way to tell what + * the actuall size of code + data the uncompressed kernel will use. + * If this is insufficient, the decompressor will relocate itself out of the + * way before performing the decompression. + */ +#define MAX_UNCOMP_KERNEL_SIZE SZ_32M + +/* + * The kernel zImage should preferably be located between 32 MB and 128 MB + * from the base of DRAM. The min address leaves space for a maximal size + * uncompressed image, and the max address is due to how the zImage decompressor + * picks a destination address. + */ +#define ZIMAGE_OFFSET_LIMIT SZ_128M +#define MIN_ZIMAGE_OFFSET MAX_UNCOMP_KERNEL_SIZE +#define MAX_FDT_OFFSET ZIMAGE_OFFSET_LIMIT + +#endif /* _ASM_ARM_EFI_H */ diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h index 58cfe9f1a..5c17d2dec 100644 --- a/arch/arm/include/asm/fixmap.h +++ b/arch/arm/include/asm/fixmap.h @@ -19,20 +19,47 @@ enum fixed_addresses { FIX_TEXT_POKE0, FIX_TEXT_POKE1, - __end_of_fixed_addresses + __end_of_fixmap_region, + + /* + * Share the kmap() region with early_ioremap(): this is guaranteed + * not to clash since early_ioremap() is only available before + * paging_init(), and kmap() only after. + */ +#define NR_FIX_BTMAPS 32 +#define FIX_BTMAPS_SLOTS 7 +#define TOTAL_FIX_BTMAPS (NR_FIX_BTMAPS * FIX_BTMAPS_SLOTS) + + FIX_BTMAP_END = __end_of_permanent_fixed_addresses, + FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1, + __end_of_early_ioremap_region }; +static const enum fixed_addresses __end_of_fixed_addresses = + __end_of_fixmap_region > __end_of_early_ioremap_region ? + __end_of_fixmap_region : __end_of_early_ioremap_region; + #define FIXMAP_PAGE_COMMON (L_PTE_YOUNG | L_PTE_PRESENT | L_PTE_XN | L_PTE_DIRTY) #define FIXMAP_PAGE_NORMAL (FIXMAP_PAGE_COMMON | L_PTE_MT_WRITEBACK) +#define FIXMAP_PAGE_RO (FIXMAP_PAGE_NORMAL | L_PTE_RDONLY) /* Used by set_fixmap_(io|nocache), both meant for mapping a device */ #define FIXMAP_PAGE_IO (FIXMAP_PAGE_COMMON | L_PTE_MT_DEV_SHARED | L_PTE_SHARED) #define FIXMAP_PAGE_NOCACHE FIXMAP_PAGE_IO +#define __early_set_fixmap __set_fixmap + +#ifdef CONFIG_MMU + void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot); void __init early_fixmap_init(void); #include <asm-generic/fixmap.h> +#else + +static inline void early_fixmap_init(void) { } + +#endif #endif diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h index fe3ea776d..3d7351c84 100644 --- a/arch/arm/include/asm/hardirq.h +++ b/arch/arm/include/asm/hardirq.h @@ -5,7 +5,7 @@ #include <linux/threads.h> #include <asm/irq.h> -#define NR_IPI 8 +#define NR_IPI 7 typedef struct { unsigned int __softirq_pending; diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index dc641ddf0..e22089fb4 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -19,6 +19,7 @@ #ifndef __ARM_KVM_ARM_H__ #define __ARM_KVM_ARM_H__ +#include <linux/const.h> #include <linux/types.h> /* Hyp Configuration Register (HCR) bits */ @@ -132,10 +133,9 @@ * space. */ #define KVM_PHYS_SHIFT (40) -#define KVM_PHYS_SIZE (1ULL << KVM_PHYS_SHIFT) -#define KVM_PHYS_MASK (KVM_PHYS_SIZE - 1ULL) -#define PTRS_PER_S2_PGD (1ULL << (KVM_PHYS_SHIFT - 30)) -#define S2_PGD_ORDER get_order(PTRS_PER_S2_PGD * sizeof(pgd_t)) +#define KVM_PHYS_SIZE (_AC(1, ULL) << KVM_PHYS_SHIFT) +#define KVM_PHYS_MASK (KVM_PHYS_SIZE - _AC(1, ULL)) +#define PTRS_PER_S2_PGD (_AC(1, ULL) << (KVM_PHYS_SHIFT - 30)) /* Virtualization Translation Control Register (VTCR) bits */ #define VTCR_SH0 (3 << 12) @@ -162,17 +162,17 @@ #define VTTBR_X (5 - KVM_T0SZ) #endif #define VTTBR_BADDR_SHIFT (VTTBR_X - 1) -#define VTTBR_BADDR_MASK (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT) -#define VTTBR_VMID_SHIFT (48LLU) -#define VTTBR_VMID_MASK (0xffLLU << VTTBR_VMID_SHIFT) +#define VTTBR_BADDR_MASK (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT) +#define VTTBR_VMID_SHIFT _AC(48, ULL) +#define VTTBR_VMID_MASK(size) (_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT) /* Hyp Syndrome Register (HSR) bits */ #define HSR_EC_SHIFT (26) -#define HSR_EC (0x3fU << HSR_EC_SHIFT) -#define HSR_IL (1U << 25) +#define HSR_EC (_AC(0x3f, UL) << HSR_EC_SHIFT) +#define HSR_IL (_AC(1, UL) << 25) #define HSR_ISS (HSR_IL - 1) #define HSR_ISV_SHIFT (24) -#define HSR_ISV (1U << HSR_ISV_SHIFT) +#define HSR_ISV (_AC(1, UL) << HSR_ISV_SHIFT) #define HSR_SRT_SHIFT (16) #define HSR_SRT_MASK (0xf << HSR_SRT_SHIFT) #define HSR_FSC (0x3f) @@ -180,9 +180,9 @@ #define HSR_SSE (1 << 21) #define HSR_WNR (1 << 6) #define HSR_CV_SHIFT (24) -#define HSR_CV (1U << HSR_CV_SHIFT) +#define HSR_CV (_AC(1, UL) << HSR_CV_SHIFT) #define HSR_COND_SHIFT (20) -#define HSR_COND (0xfU << HSR_COND_SHIFT) +#define HSR_COND (_AC(0xf, UL) << HSR_COND_SHIFT) #define FSC_FAULT (0x04) #define FSC_ACCESS (0x08) @@ -210,13 +210,13 @@ #define HSR_EC_DABT (0x24) #define HSR_EC_DABT_HYP (0x25) -#define HSR_WFI_IS_WFE (1U << 0) +#define HSR_WFI_IS_WFE (_AC(1, UL) << 0) -#define HSR_HVC_IMM_MASK ((1UL << 16) - 1) +#define HSR_HVC_IMM_MASK ((_AC(1, UL) << 16) - 1) -#define HSR_DABT_S1PTW (1U << 7) -#define HSR_DABT_CM (1U << 8) -#define HSR_DABT_EA (1U << 9) +#define HSR_DABT_S1PTW (_AC(1, UL) << 7) +#define HSR_DABT_CM (_AC(1, UL) << 8) +#define HSR_DABT_EA (_AC(1, UL) << 9) #define kvm_arm_exception_type \ {0, "RESET" }, \ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 6692982c9..f9f27792d 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -150,6 +150,12 @@ struct kvm_vcpu_stat { u32 halt_successful_poll; u32 halt_attempted_poll; u32 halt_wakeup; + u32 hvc_exit_stat; + u64 wfe_exit_stat; + u64 wfi_exit_stat; + u64 mmio_exit_user; + u64 mmio_exit_kernel; + u64 exits; }; int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init); diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 405aa1883..a520b7987 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -182,7 +182,8 @@ static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu) return (vcpu->arch.cp15[c1_SCTLR] & 0b101) == 0b101; } -static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn, +static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, + kvm_pfn_t pfn, unsigned long size, bool ipa_uncached) { @@ -246,7 +247,7 @@ static inline void __kvm_flush_dcache_pte(pte_t pte) static inline void __kvm_flush_dcache_pmd(pmd_t pmd) { unsigned long size = PMD_SIZE; - pfn_t pfn = pmd_pfn(pmd); + kvm_pfn_t pfn = pmd_pfn(pmd); while (size) { void *va = kmap_atomic_pfn(pfn); @@ -279,6 +280,11 @@ static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd, pgd_t *merged_hyp_pgd, unsigned long hyp_idmap_start) { } +static inline unsigned int kvm_get_vmid_bits(void) +{ + return 8; +} + #endif /* !__ASSEMBLY__ */ #endif /* __ARM_KVM_MMU_H__ */ diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index f98c7f32c..9b7c328fb 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -42,6 +42,8 @@ enum { extern void iotable_init(struct map_desc *, int); extern void vm_reserve_area_early(unsigned long addr, unsigned long size, void *caller); +extern void create_mapping_late(struct mm_struct *mm, struct map_desc *md, + bool ng); #ifdef CONFIG_DEBUG_LL extern void debug_ll_addr(unsigned long *paddr, unsigned long *vaddr); diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 9b32f76bb..432ce8176 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -26,7 +26,7 @@ void __check_vmalloc_seq(struct mm_struct *mm); #ifdef CONFIG_CPU_HAS_ASID void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); -#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; }) +#define init_new_context(tsk,mm) ({ atomic64_set(&(mm)->context.id, 0); 0; }) #ifdef CONFIG_ARM_ERRATA_798181 void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm, diff --git a/arch/arm/include/asm/paravirt.h b/arch/arm/include/asm/paravirt.h new file mode 100644 index 000000000..8435ff591 --- /dev/null +++ b/arch/arm/include/asm/paravirt.h @@ -0,0 +1,20 @@ +#ifndef _ASM_ARM_PARAVIRT_H +#define _ASM_ARM_PARAVIRT_H + +#ifdef CONFIG_PARAVIRT +struct static_key; +extern struct static_key paravirt_steal_enabled; +extern struct static_key paravirt_steal_rq_enabled; + +struct pv_time_ops { + unsigned long long (*steal_clock)(int cpu); +}; +extern struct pv_time_ops pv_time_ops; + +static inline u64 paravirt_steal_clock(int cpu) +{ + return pv_time_ops.steal_clock(cpu); +} +#endif + +#endif diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index a745a2a53..dc46398bc 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -88,7 +88,6 @@ #define L_PMD_SECT_VALID (_AT(pmdval_t, 1) << 0) #define L_PMD_SECT_DIRTY (_AT(pmdval_t, 1) << 55) -#define L_PMD_SECT_SPLITTING (_AT(pmdval_t, 1) << 56) #define L_PMD_SECT_NONE (_AT(pmdval_t, 1) << 57) #define L_PMD_SECT_RDONLY (_AT(pteval_t, 1) << 58) @@ -232,13 +231,6 @@ static inline pte_t pte_mkspecial(pte_t pte) #ifdef CONFIG_TRANSPARENT_HUGEPAGE #define pmd_trans_huge(pmd) (pmd_val(pmd) && !pmd_table(pmd)) -#define pmd_trans_splitting(pmd) (pmd_isset((pmd), L_PMD_SECT_SPLITTING)) - -#ifdef CONFIG_HAVE_RCU_TABLE_FREE -#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH -void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address, - pmd_t *pmdp); -#endif #endif #define PMD_BIT_FUNC(fn,op) \ @@ -246,9 +238,9 @@ static inline pmd_t pmd_##fn(pmd_t pmd) { pmd_val(pmd) op; return pmd; } PMD_BIT_FUNC(wrprotect, |= L_PMD_SECT_RDONLY); PMD_BIT_FUNC(mkold, &= ~PMD_SECT_AF); -PMD_BIT_FUNC(mksplitting, |= L_PMD_SECT_SPLITTING); PMD_BIT_FUNC(mkwrite, &= ~L_PMD_SECT_RDONLY); PMD_BIT_FUNC(mkdirty, |= L_PMD_SECT_DIRTY); +PMD_BIT_FUNC(mkclean, &= ~L_PMD_SECT_DIRTY); PMD_BIT_FUNC(mkyoung, |= PMD_SECT_AF); #define pmd_mkhuge(pmd) (__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT)) diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h index b4c6d9936..e1b825dfa 100644 --- a/arch/arm/include/asm/psci.h +++ b/arch/arm/include/asm/psci.h @@ -14,7 +14,7 @@ #ifndef __ASM_ARM_PSCI_H #define __ASM_ARM_PSCI_H -extern struct smp_operations psci_smp_ops; +extern const struct smp_operations psci_smp_ops; #if defined(CONFIG_SMP) && defined(CONFIG_ARM_PSCI) bool psci_smp_available(void); diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index e0adb9f1b..3613d7e9f 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -25,4 +25,10 @@ extern int arm_add_memory(u64 start, u64 size); extern void early_print(const char *str, ...); extern void dump_machine_table(void); +#ifdef CONFIG_ATAGS_PROC +extern void save_atags(const struct tag *tags); +#else +static inline void save_atags(const struct tag *tags) { } +#endif + #endif diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h index 712b50e0a..d769972db 100644 --- a/arch/arm/include/asm/xen/hypercall.h +++ b/arch/arm/include/asm/xen/hypercall.h @@ -35,6 +35,7 @@ #include <xen/interface/xen.h> #include <xen/interface/sched.h> +#include <xen/interface/platform.h> long privcmd_call(unsigned call, unsigned long a1, unsigned long a2, unsigned long a3, @@ -49,6 +50,12 @@ int HYPERVISOR_memory_op(unsigned int cmd, void *arg); int HYPERVISOR_physdev_op(int cmd, void *arg); int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args); int HYPERVISOR_tmem_op(void *arg); +int HYPERVISOR_platform_op_raw(void *arg); +static inline int HYPERVISOR_platform_op(struct xen_platform_op *op) +{ + op->interface_version = XENPF_INTERFACE_VERSION; + return HYPERVISOR_platform_op_raw(op); +} int HYPERVISOR_multicall(struct multicall_entry *calls, uint32_t nr); static inline int diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index 50066006e..75d596862 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -27,6 +27,8 @@ (hnd).p = val; \ } while (0) +#define __HYPERVISOR_platform_op_raw __HYPERVISOR_platform_op + #ifndef __ASSEMBLY__ /* Explicitly size integers that represent pfns in the interface with * Xen so that we can have one ABI that works for 32 and 64 bit guests. @@ -76,6 +78,7 @@ struct pvclock_wall_clock { u32 version; u32 sec; u32 nsec; + u32 sec_hi; } __attribute__((__packed__)); #endif diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/include/debug/dc21285.S index 02247f313..02247f313 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/include/debug/dc21285.S diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index ede692ffa..5dd2528e9 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -417,6 +417,7 @@ #define __NR_userfaultfd (__NR_SYSCALL_BASE+388) #define __NR_membarrier (__NR_SYSCALL_BASE+389) #define __NR_mlock2 (__NR_SYSCALL_BASE+390) +#define __NR_copy_file_range (__NR_SYSCALL_BASE+391) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index af9e59bf3..ad325a8c7 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -73,23 +73,26 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_xscale.o perf_event_v6.o \ perf_event_v7.o -CFLAGS_pj4-cp0.o := -marm AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o obj-$(CONFIG_VDSO) += vdso.o +obj-$(CONFIG_EFI) += efi.o ifneq ($(CONFIG_ARCH_EBSA110),y) obj-y += io.o endif +obj-$(CONFIG_PARAVIRT) += paravirt.o head-y := head$(MMUEXT).o obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o +AFLAGS_hyp-stub.o :=-Wa,-march=armv7-a ifeq ($(CONFIG_ARM_PSCI),y) -obj-y += psci-call.o obj-$(CONFIG_SMP) += psci_smp.o endif +obj-$(CONFIG_HAVE_ARM_SMCCC) += smccc-call.o + extra-y := $(head-y) vmlinux.lds diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index f89811fb9..7e45f69a0 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -16,6 +16,7 @@ #include <linux/syscalls.h> #include <linux/uaccess.h> #include <linux/io.h> +#include <linux/arm-smccc.h> #include <asm/checksum.h> #include <asm/ftrace.h> @@ -175,3 +176,8 @@ EXPORT_SYMBOL(__gnu_mcount_nc); EXPORT_SYMBOL(__pv_phys_pfn_offset); EXPORT_SYMBOL(__pv_offset); #endif + +#ifdef CONFIG_HAVE_ARM_SMCCC +EXPORT_SYMBOL(arm_smccc_smc); +EXPORT_SYMBOL(arm_smccc_hvc); +#endif diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h index ec4164da6..edfa2268c 100644 --- a/arch/arm/kernel/atags.h +++ b/arch/arm/kernel/atags.h @@ -1,9 +1,3 @@ -#ifdef CONFIG_ATAGS_PROC -extern void save_atags(struct tag *tags); -#else -static inline void save_atags(struct tag *tags) { } -#endif - void convert_to_tag_list(struct tag *tags); #ifdef CONFIG_ATAGS diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index ac368bb06..dfc7cd685 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -400,6 +400,7 @@ CALL(sys_userfaultfd) CALL(sys_membarrier) CALL(sys_mlock2) + CALL(sys_copy_file_range) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c index 318da3346..703926e70 100644 --- a/arch/arm/kernel/cpuidle.c +++ b/arch/arm/kernel/cpuidle.c @@ -56,7 +56,7 @@ int arm_cpuidle_suspend(int index) int cpu = smp_processor_id(); if (cpuidle_ops[cpu].suspend) - ret = cpuidle_ops[cpu].suspend(cpu, index); + ret = cpuidle_ops[cpu].suspend(index); return ret; } diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 65addcbf5..2e26016a9 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -211,7 +211,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) { const struct machine_desc *mdesc, *mdesc_best = NULL; -#ifdef CONFIG_ARCH_MULTIPLATFORM +#if defined(CONFIG_ARCH_MULTIPLATFORM) || defined(CONFIG_ARM_SINGLE_ARMV7M) DT_MACHINE_START(GENERIC_DT, "Generic DT based system") MACHINE_END diff --git a/arch/arm/kernel/efi.c b/arch/arm/kernel/efi.c new file mode 100644 index 000000000..ff8a9d8ac --- /dev/null +++ b/arch/arm/kernel/efi.c @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/efi.h> +#include <asm/efi.h> +#include <asm/mach/map.h> +#include <asm/mmu_context.h> + +int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md) +{ + struct map_desc desc = { + .virtual = md->virt_addr, + .pfn = __phys_to_pfn(md->phys_addr), + .length = md->num_pages * EFI_PAGE_SIZE, + }; + + /* + * Order is important here: memory regions may have all of the + * bits below set (and usually do), so we check them in order of + * preference. + */ + if (md->attribute & EFI_MEMORY_WB) + desc.type = MT_MEMORY_RWX; + else if (md->attribute & EFI_MEMORY_WT) + desc.type = MT_MEMORY_RWX_NONCACHED; + else if (md->attribute & EFI_MEMORY_WC) + desc.type = MT_DEVICE_WC; + else + desc.type = MT_DEVICE; + + create_mapping_late(mm, &desc, true); + return 0; +} diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S index b6c8bb931..907534f97 100644 --- a/arch/arm/kernel/entry-v7m.S +++ b/arch/arm/kernel/entry-v7m.S @@ -88,7 +88,7 @@ __pendsv_entry: @ execute the pending work, including reschedule get_thread_info tsk mov why, #0 - b ret_to_user + b ret_to_user_from_irq ENDPROC(__pendsv_entry) /* diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c index 097e2e201..0c7efc344 100644 --- a/arch/arm/kernel/module-plts.c +++ b/arch/arm/kernel/module-plts.c @@ -32,7 +32,7 @@ struct plt_entries { static bool in_init(const struct module *mod, u32 addr) { - return addr - (u32)mod->module_init < mod->init_size; + return addr - (u32)mod->init_layout.base < mod->init_layout.size; } u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val) diff --git a/arch/arm/kernel/paravirt.c b/arch/arm/kernel/paravirt.c new file mode 100644 index 000000000..53f371ed4 --- /dev/null +++ b/arch/arm/kernel/paravirt.c @@ -0,0 +1,25 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2013 Citrix Systems + * + * Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> + */ + +#include <linux/export.h> +#include <linux/jump_label.h> +#include <linux/types.h> +#include <asm/paravirt.h> + +struct static_key paravirt_steal_enabled; +struct static_key paravirt_steal_rq_enabled; + +struct pv_time_ops pv_time_ops; +EXPORT_SYMBOL_GPL(pv_time_ops); diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 126dc679b..4152158f6 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -35,133 +35,117 @@ * but the encodings are considered to be `reserved' in the case that * they are not available. */ -enum armv7_perf_types { - ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, - ARMV7_PERFCTR_L1_ICACHE_REFILL = 0x01, - ARMV7_PERFCTR_ITLB_REFILL = 0x02, - ARMV7_PERFCTR_L1_DCACHE_REFILL = 0x03, - ARMV7_PERFCTR_L1_DCACHE_ACCESS = 0x04, - ARMV7_PERFCTR_DTLB_REFILL = 0x05, - ARMV7_PERFCTR_MEM_READ = 0x06, - ARMV7_PERFCTR_MEM_WRITE = 0x07, - ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, - ARMV7_PERFCTR_EXC_TAKEN = 0x09, - ARMV7_PERFCTR_EXC_EXECUTED = 0x0A, - ARMV7_PERFCTR_CID_WRITE = 0x0B, +#define ARMV7_PERFCTR_PMNC_SW_INCR 0x00 +#define ARMV7_PERFCTR_L1_ICACHE_REFILL 0x01 +#define ARMV7_PERFCTR_ITLB_REFILL 0x02 +#define ARMV7_PERFCTR_L1_DCACHE_REFILL 0x03 +#define ARMV7_PERFCTR_L1_DCACHE_ACCESS 0x04 +#define ARMV7_PERFCTR_DTLB_REFILL 0x05 +#define ARMV7_PERFCTR_MEM_READ 0x06 +#define ARMV7_PERFCTR_MEM_WRITE 0x07 +#define ARMV7_PERFCTR_INSTR_EXECUTED 0x08 +#define ARMV7_PERFCTR_EXC_TAKEN 0x09 +#define ARMV7_PERFCTR_EXC_EXECUTED 0x0A +#define ARMV7_PERFCTR_CID_WRITE 0x0B - /* - * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. - * It counts: - * - all (taken) branch instructions, - * - instructions that explicitly write the PC, - * - exception generating instructions. - */ - ARMV7_PERFCTR_PC_WRITE = 0x0C, - ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D, - ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, - ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS = 0x0F, - ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10, - ARMV7_PERFCTR_CLOCK_CYCLES = 0x11, - ARMV7_PERFCTR_PC_BRANCH_PRED = 0x12, - - /* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */ - ARMV7_PERFCTR_MEM_ACCESS = 0x13, - ARMV7_PERFCTR_L1_ICACHE_ACCESS = 0x14, - ARMV7_PERFCTR_L1_DCACHE_WB = 0x15, - ARMV7_PERFCTR_L2_CACHE_ACCESS = 0x16, - ARMV7_PERFCTR_L2_CACHE_REFILL = 0x17, - ARMV7_PERFCTR_L2_CACHE_WB = 0x18, - ARMV7_PERFCTR_BUS_ACCESS = 0x19, - ARMV7_PERFCTR_MEM_ERROR = 0x1A, - ARMV7_PERFCTR_INSTR_SPEC = 0x1B, - ARMV7_PERFCTR_TTBR_WRITE = 0x1C, - ARMV7_PERFCTR_BUS_CYCLES = 0x1D, - - ARMV7_PERFCTR_CPU_CYCLES = 0xFF -}; +/* + * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. + * It counts: + * - all (taken) branch instructions, + * - instructions that explicitly write the PC, + * - exception generating instructions. + */ +#define ARMV7_PERFCTR_PC_WRITE 0x0C +#define ARMV7_PERFCTR_PC_IMM_BRANCH 0x0D +#define ARMV7_PERFCTR_PC_PROC_RETURN 0x0E +#define ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS 0x0F +#define ARMV7_PERFCTR_PC_BRANCH_MIS_PRED 0x10 +#define ARMV7_PERFCTR_CLOCK_CYCLES 0x11 +#define ARMV7_PERFCTR_PC_BRANCH_PRED 0x12 + +/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */ +#define ARMV7_PERFCTR_MEM_ACCESS 0x13 +#define ARMV7_PERFCTR_L1_ICACHE_ACCESS 0x14 +#define ARMV7_PERFCTR_L1_DCACHE_WB 0x15 +#define ARMV7_PERFCTR_L2_CACHE_ACCESS 0x16 +#define ARMV7_PERFCTR_L2_CACHE_REFILL 0x17 +#define ARMV7_PERFCTR_L2_CACHE_WB 0x18 +#define ARMV7_PERFCTR_BUS_ACCESS 0x19 +#define ARMV7_PERFCTR_MEM_ERROR 0x1A +#define ARMV7_PERFCTR_INSTR_SPEC 0x1B +#define ARMV7_PERFCTR_TTBR_WRITE 0x1C +#define ARMV7_PERFCTR_BUS_CYCLES 0x1D + +#define ARMV7_PERFCTR_CPU_CYCLES 0xFF /* ARMv7 Cortex-A8 specific event types */ -enum armv7_a8_perf_types { - ARMV7_A8_PERFCTR_L2_CACHE_ACCESS = 0x43, - ARMV7_A8_PERFCTR_L2_CACHE_REFILL = 0x44, - ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS = 0x50, - ARMV7_A8_PERFCTR_STALL_ISIDE = 0x56, -}; +#define ARMV7_A8_PERFCTR_L2_CACHE_ACCESS 0x43 +#define ARMV7_A8_PERFCTR_L2_CACHE_REFILL 0x44 +#define ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS 0x50 +#define ARMV7_A8_PERFCTR_STALL_ISIDE 0x56 /* ARMv7 Cortex-A9 specific event types */ -enum armv7_a9_perf_types { - ARMV7_A9_PERFCTR_INSTR_CORE_RENAME = 0x68, - ARMV7_A9_PERFCTR_STALL_ICACHE = 0x60, - ARMV7_A9_PERFCTR_STALL_DISPATCH = 0x66, -}; +#define ARMV7_A9_PERFCTR_INSTR_CORE_RENAME 0x68 +#define ARMV7_A9_PERFCTR_STALL_ICACHE 0x60 +#define ARMV7_A9_PERFCTR_STALL_DISPATCH 0x66 /* ARMv7 Cortex-A5 specific event types */ -enum armv7_a5_perf_types { - ARMV7_A5_PERFCTR_PREFETCH_LINEFILL = 0xc2, - ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP = 0xc3, -}; +#define ARMV7_A5_PERFCTR_PREFETCH_LINEFILL 0xc2 +#define ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP 0xc3 /* ARMv7 Cortex-A15 specific event types */ -enum armv7_a15_perf_types { - ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ = 0x40, - ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE = 0x41, - ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ = 0x42, - ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE = 0x43, +#define ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ 0x40 +#define ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE 0x41 +#define ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ 0x42 +#define ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE 0x43 - ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ = 0x4C, - ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE = 0x4D, +#define ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ 0x4C +#define ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE 0x4D - ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ = 0x50, - ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE = 0x51, - ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ = 0x52, - ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE = 0x53, +#define ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ 0x50 +#define ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE 0x51 +#define ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ 0x52 +#define ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE 0x53 - ARMV7_A15_PERFCTR_PC_WRITE_SPEC = 0x76, -}; +#define ARMV7_A15_PERFCTR_PC_WRITE_SPEC 0x76 /* ARMv7 Cortex-A12 specific event types */ -enum armv7_a12_perf_types { - ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ = 0x40, - ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE = 0x41, +#define ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ 0x40 +#define ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE 0x41 - ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ = 0x50, - ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE = 0x51, +#define ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ 0x50 +#define ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE 0x51 - ARMV7_A12_PERFCTR_PC_WRITE_SPEC = 0x76, +#define ARMV7_A12_PERFCTR_PC_WRITE_SPEC 0x76 - ARMV7_A12_PERFCTR_PF_TLB_REFILL = 0xe7, -}; +#define ARMV7_A12_PERFCTR_PF_TLB_REFILL 0xe7 /* ARMv7 Krait specific event types */ -enum krait_perf_types { - KRAIT_PMRESR0_GROUP0 = 0xcc, - KRAIT_PMRESR1_GROUP0 = 0xd0, - KRAIT_PMRESR2_GROUP0 = 0xd4, - KRAIT_VPMRESR0_GROUP0 = 0xd8, +#define KRAIT_PMRESR0_GROUP0 0xcc +#define KRAIT_PMRESR1_GROUP0 0xd0 +#define KRAIT_PMRESR2_GROUP0 0xd4 +#define KRAIT_VPMRESR0_GROUP0 0xd8 - KRAIT_PERFCTR_L1_ICACHE_ACCESS = 0x10011, - KRAIT_PERFCTR_L1_ICACHE_MISS = 0x10010, +#define KRAIT_PERFCTR_L1_ICACHE_ACCESS 0x10011 +#define KRAIT_PERFCTR_L1_ICACHE_MISS 0x10010 - KRAIT_PERFCTR_L1_ITLB_ACCESS = 0x12222, - KRAIT_PERFCTR_L1_DTLB_ACCESS = 0x12210, -}; +#define KRAIT_PERFCTR_L1_ITLB_ACCESS 0x12222 +#define KRAIT_PERFCTR_L1_DTLB_ACCESS 0x12210 /* ARMv7 Scorpion specific event types */ -enum scorpion_perf_types { - SCORPION_LPM0_GROUP0 = 0x4c, - SCORPION_LPM1_GROUP0 = 0x50, - SCORPION_LPM2_GROUP0 = 0x54, - SCORPION_L2LPM_GROUP0 = 0x58, - SCORPION_VLPM_GROUP0 = 0x5c, +#define SCORPION_LPM0_GROUP0 0x4c +#define SCORPION_LPM1_GROUP0 0x50 +#define SCORPION_LPM2_GROUP0 0x54 +#define SCORPION_L2LPM_GROUP0 0x58 +#define SCORPION_VLPM_GROUP0 0x5c - SCORPION_ICACHE_ACCESS = 0x10053, - SCORPION_ICACHE_MISS = 0x10052, +#define SCORPION_ICACHE_ACCESS 0x10053 +#define SCORPION_ICACHE_MISS 0x10052 - SCORPION_DTLB_ACCESS = 0x12013, - SCORPION_DTLB_MISS = 0x12012, +#define SCORPION_DTLB_ACCESS 0x12013 +#define SCORPION_DTLB_MISS 0x12012 - SCORPION_ITLB_MISS = 0x12021, -}; +#define SCORPION_ITLB_MISS 0x12021 /* * Cortex-A8 HW events mapping @@ -547,6 +531,134 @@ static const unsigned scorpion_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; +PMU_FORMAT_ATTR(event, "config:0-7"); + +static struct attribute *armv7_pmu_format_attrs[] = { + &format_attr_event.attr, + NULL, +}; + +static struct attribute_group armv7_pmu_format_attr_group = { + .name = "format", + .attrs = armv7_pmu_format_attrs, +}; + +#define ARMV7_EVENT_ATTR_RESOLVE(m) #m +#define ARMV7_EVENT_ATTR(name, config) \ + PMU_EVENT_ATTR_STRING(name, armv7_event_attr_##name, \ + "event=" ARMV7_EVENT_ATTR_RESOLVE(config)) + +ARMV7_EVENT_ATTR(sw_incr, ARMV7_PERFCTR_PMNC_SW_INCR); +ARMV7_EVENT_ATTR(l1i_cache_refill, ARMV7_PERFCTR_L1_ICACHE_REFILL); +ARMV7_EVENT_ATTR(l1i_tlb_refill, ARMV7_PERFCTR_ITLB_REFILL); +ARMV7_EVENT_ATTR(l1d_cache_refill, ARMV7_PERFCTR_L1_DCACHE_REFILL); +ARMV7_EVENT_ATTR(l1d_cache, ARMV7_PERFCTR_L1_DCACHE_ACCESS); +ARMV7_EVENT_ATTR(l1d_tlb_refill, ARMV7_PERFCTR_DTLB_REFILL); +ARMV7_EVENT_ATTR(ld_retired, ARMV7_PERFCTR_MEM_READ); +ARMV7_EVENT_ATTR(st_retired, ARMV7_PERFCTR_MEM_WRITE); +ARMV7_EVENT_ATTR(inst_retired, ARMV7_PERFCTR_INSTR_EXECUTED); +ARMV7_EVENT_ATTR(exc_taken, ARMV7_PERFCTR_EXC_TAKEN); +ARMV7_EVENT_ATTR(exc_return, ARMV7_PERFCTR_EXC_EXECUTED); +ARMV7_EVENT_ATTR(cid_write_retired, ARMV7_PERFCTR_CID_WRITE); +ARMV7_EVENT_ATTR(pc_write_retired, ARMV7_PERFCTR_PC_WRITE); +ARMV7_EVENT_ATTR(br_immed_retired, ARMV7_PERFCTR_PC_IMM_BRANCH); +ARMV7_EVENT_ATTR(br_return_retired, ARMV7_PERFCTR_PC_PROC_RETURN); +ARMV7_EVENT_ATTR(unaligned_ldst_retired, ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS); +ARMV7_EVENT_ATTR(br_mis_pred, ARMV7_PERFCTR_PC_BRANCH_MIS_PRED); +ARMV7_EVENT_ATTR(cpu_cycles, ARMV7_PERFCTR_CLOCK_CYCLES); +ARMV7_EVENT_ATTR(br_pred, ARMV7_PERFCTR_PC_BRANCH_PRED); + +static struct attribute *armv7_pmuv1_event_attrs[] = { + &armv7_event_attr_sw_incr.attr.attr, + &armv7_event_attr_l1i_cache_refill.attr.attr, + &armv7_event_attr_l1i_tlb_refill.attr.attr, + &armv7_event_attr_l1d_cache_refill.attr.attr, + &armv7_event_attr_l1d_cache.attr.attr, + &armv7_event_attr_l1d_tlb_refill.attr.attr, + &armv7_event_attr_ld_retired.attr.attr, + &armv7_event_attr_st_retired.attr.attr, + &armv7_event_attr_inst_retired.attr.attr, + &armv7_event_attr_exc_taken.attr.attr, + &armv7_event_attr_exc_return.attr.attr, + &armv7_event_attr_cid_write_retired.attr.attr, + &armv7_event_attr_pc_write_retired.attr.attr, + &armv7_event_attr_br_immed_retired.attr.attr, + &armv7_event_attr_br_return_retired.attr.attr, + &armv7_event_attr_unaligned_ldst_retired.attr.attr, + &armv7_event_attr_br_mis_pred.attr.attr, + &armv7_event_attr_cpu_cycles.attr.attr, + &armv7_event_attr_br_pred.attr.attr, + NULL, +}; + +static struct attribute_group armv7_pmuv1_events_attr_group = { + .name = "events", + .attrs = armv7_pmuv1_event_attrs, +}; + +static const struct attribute_group *armv7_pmuv1_attr_groups[] = { + &armv7_pmuv1_events_attr_group, + &armv7_pmu_format_attr_group, + NULL, +}; + +ARMV7_EVENT_ATTR(mem_access, ARMV7_PERFCTR_MEM_ACCESS); +ARMV7_EVENT_ATTR(l1i_cache, ARMV7_PERFCTR_L1_ICACHE_ACCESS); +ARMV7_EVENT_ATTR(l1d_cache_wb, ARMV7_PERFCTR_L1_DCACHE_WB); +ARMV7_EVENT_ATTR(l2d_cache, ARMV7_PERFCTR_L2_CACHE_ACCESS); +ARMV7_EVENT_ATTR(l2d_cache_refill, ARMV7_PERFCTR_L2_CACHE_REFILL); +ARMV7_EVENT_ATTR(l2d_cache_wb, ARMV7_PERFCTR_L2_CACHE_WB); +ARMV7_EVENT_ATTR(bus_access, ARMV7_PERFCTR_BUS_ACCESS); +ARMV7_EVENT_ATTR(memory_error, ARMV7_PERFCTR_MEM_ERROR); +ARMV7_EVENT_ATTR(inst_spec, ARMV7_PERFCTR_INSTR_SPEC); +ARMV7_EVENT_ATTR(ttbr_write_retired, ARMV7_PERFCTR_TTBR_WRITE); +ARMV7_EVENT_ATTR(bus_cycles, ARMV7_PERFCTR_BUS_CYCLES); + +static struct attribute *armv7_pmuv2_event_attrs[] = { + &armv7_event_attr_sw_incr.attr.attr, + &armv7_event_attr_l1i_cache_refill.attr.attr, + &armv7_event_attr_l1i_tlb_refill.attr.attr, + &armv7_event_attr_l1d_cache_refill.attr.attr, + &armv7_event_attr_l1d_cache.attr.attr, + &armv7_event_attr_l1d_tlb_refill.attr.attr, + &armv7_event_attr_ld_retired.attr.attr, + &armv7_event_attr_st_retired.attr.attr, + &armv7_event_attr_inst_retired.attr.attr, + &armv7_event_attr_exc_taken.attr.attr, + &armv7_event_attr_exc_return.attr.attr, + &armv7_event_attr_cid_write_retired.attr.attr, + &armv7_event_attr_pc_write_retired.attr.attr, + &armv7_event_attr_br_immed_retired.attr.attr, + &armv7_event_attr_br_return_retired.attr.attr, + &armv7_event_attr_unaligned_ldst_retired.attr.attr, + &armv7_event_attr_br_mis_pred.attr.attr, + &armv7_event_attr_cpu_cycles.attr.attr, + &armv7_event_attr_br_pred.attr.attr, + &armv7_event_attr_mem_access.attr.attr, + &armv7_event_attr_l1i_cache.attr.attr, + &armv7_event_attr_l1d_cache_wb.attr.attr, + &armv7_event_attr_l2d_cache.attr.attr, + &armv7_event_attr_l2d_cache_refill.attr.attr, + &armv7_event_attr_l2d_cache_wb.attr.attr, + &armv7_event_attr_bus_access.attr.attr, + &armv7_event_attr_memory_error.attr.attr, + &armv7_event_attr_inst_spec.attr.attr, + &armv7_event_attr_ttbr_write_retired.attr.attr, + &armv7_event_attr_bus_cycles.attr.attr, + NULL, +}; + +static struct attribute_group armv7_pmuv2_events_attr_group = { + .name = "events", + .attrs = armv7_pmuv2_event_attrs, +}; + +static const struct attribute_group *armv7_pmuv2_attr_groups[] = { + &armv7_pmuv2_events_attr_group, + &armv7_pmu_format_attr_group, + NULL, +}; + /* * Perf Events' indices */ @@ -1085,6 +1197,7 @@ static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a8"; cpu_pmu->map_event = armv7_a8_map_event; + cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups; return armv7_probe_num_events(cpu_pmu); } @@ -1093,6 +1206,7 @@ static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a9"; cpu_pmu->map_event = armv7_a9_map_event; + cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups; return armv7_probe_num_events(cpu_pmu); } @@ -1101,6 +1215,7 @@ static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a5"; cpu_pmu->map_event = armv7_a5_map_event; + cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups; return armv7_probe_num_events(cpu_pmu); } @@ -1110,6 +1225,7 @@ static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->name = "armv7_cortex_a15"; cpu_pmu->map_event = armv7_a15_map_event; cpu_pmu->set_event_filter = armv7pmu_set_event_filter; + cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups; return armv7_probe_num_events(cpu_pmu); } @@ -1119,6 +1235,7 @@ static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->name = "armv7_cortex_a7"; cpu_pmu->map_event = armv7_a7_map_event; cpu_pmu->set_event_filter = armv7pmu_set_event_filter; + cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups; return armv7_probe_num_events(cpu_pmu); } @@ -1128,6 +1245,7 @@ static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->name = "armv7_cortex_a12"; cpu_pmu->map_event = armv7_a12_map_event; cpu_pmu->set_event_filter = armv7pmu_set_event_filter; + cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups; return armv7_probe_num_events(cpu_pmu); } @@ -1135,6 +1253,7 @@ static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) { int ret = armv7_a12_pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a17"; + cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups; return ret; } diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c index 8153e36b2..7c9248b74 100644 --- a/arch/arm/kernel/pj4-cp0.c +++ b/arch/arm/kernel/pj4-cp0.c @@ -66,9 +66,13 @@ static void __init pj4_cp_access_write(u32 value) __asm__ __volatile__ ( "mcr p15, 0, %1, c1, c0, 2\n\t" +#ifdef CONFIG_THUMB2_KERNEL + "isb\n\t" +#else "mrc p15, 0, %0, c1, c0, 2\n\t" "mov %0, %0\n\t" "sub pc, pc, #4\n\t" +#endif : "=r" (temp) : "r" (value)); } diff --git a/arch/arm/kernel/psci-call.S b/arch/arm/kernel/psci-call.S deleted file mode 100644 index a78e9e1e2..000000000 --- a/arch/arm/kernel/psci-call.S +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Copyright (C) 2015 ARM Limited - * - * Author: Mark Rutland <mark.rutland@arm.com> - */ - -#include <linux/linkage.h> - -#include <asm/opcodes-sec.h> -#include <asm/opcodes-virt.h> - -/* int __invoke_psci_fn_hvc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */ -ENTRY(__invoke_psci_fn_hvc) - __HVC(0) - bx lr -ENDPROC(__invoke_psci_fn_hvc) - -/* int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */ -ENTRY(__invoke_psci_fn_smc) - __SMC(0) - bx lr -ENDPROC(__invoke_psci_fn_smc) diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index 9d479b2ea..cb3fcaeb2 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -120,7 +120,7 @@ bool __init psci_smp_available(void) return (psci_ops.cpu_on != NULL); } -struct smp_operations __initdata psci_smp_ops = { +const struct smp_operations psci_smp_ops __initconst = { .smp_boot_secondary = psci_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_disable = psci_cpu_disable, diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 20edd349d..7d0cba6f1 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/efi.h> #include <linux/export.h> #include <linux/kernel.h> #include <linux/stddef.h> @@ -37,7 +38,9 @@ #include <asm/cp15.h> #include <asm/cpu.h> #include <asm/cputype.h> +#include <asm/efi.h> #include <asm/elf.h> +#include <asm/early_ioremap.h> #include <asm/fixmap.h> #include <asm/procinfo.h> #include <asm/psci.h> @@ -375,6 +378,72 @@ void __init early_print(const char *str, ...) printk("%s", buf); } +#ifdef CONFIG_ARM_PATCH_IDIV + +static inline u32 __attribute_const__ sdiv_instruction(void) +{ + if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) { + /* "sdiv r0, r0, r1" */ + u32 insn = __opcode_thumb32_compose(0xfb90, 0xf0f1); + return __opcode_to_mem_thumb32(insn); + } + + /* "sdiv r0, r0, r1" */ + return __opcode_to_mem_arm(0xe710f110); +} + +static inline u32 __attribute_const__ udiv_instruction(void) +{ + if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) { + /* "udiv r0, r0, r1" */ + u32 insn = __opcode_thumb32_compose(0xfbb0, 0xf0f1); + return __opcode_to_mem_thumb32(insn); + } + + /* "udiv r0, r0, r1" */ + return __opcode_to_mem_arm(0xe730f110); +} + +static inline u32 __attribute_const__ bx_lr_instruction(void) +{ + if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) { + /* "bx lr; nop" */ + u32 insn = __opcode_thumb32_compose(0x4770, 0x46c0); + return __opcode_to_mem_thumb32(insn); + } + + /* "bx lr" */ + return __opcode_to_mem_arm(0xe12fff1e); +} + +static void __init patch_aeabi_idiv(void) +{ + extern void __aeabi_uidiv(void); + extern void __aeabi_idiv(void); + uintptr_t fn_addr; + unsigned int mask; + + mask = IS_ENABLED(CONFIG_THUMB2_KERNEL) ? HWCAP_IDIVT : HWCAP_IDIVA; + if (!(elf_hwcap & mask)) + return; + + pr_info("CPU: div instructions available: patching division code\n"); + + fn_addr = ((uintptr_t)&__aeabi_uidiv) & ~1; + ((u32 *)fn_addr)[0] = udiv_instruction(); + ((u32 *)fn_addr)[1] = bx_lr_instruction(); + flush_icache_range(fn_addr, fn_addr + 8); + + fn_addr = ((uintptr_t)&__aeabi_idiv) & ~1; + ((u32 *)fn_addr)[0] = sdiv_instruction(); + ((u32 *)fn_addr)[1] = bx_lr_instruction(); + flush_icache_range(fn_addr, fn_addr + 8); +} + +#else +static inline void patch_aeabi_idiv(void) { } +#endif + static void __init cpuid_init_hwcaps(void) { int block; @@ -642,6 +711,7 @@ static void __init setup_processor(void) elf_hwcap = list->elf_hwcap; cpuid_init_hwcaps(); + patch_aeabi_idiv(); #ifndef CONFIG_ARM_THUMB elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT); @@ -956,8 +1026,8 @@ void __init setup_arch(char **cmdline_p) strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = cmd_line; - if (IS_ENABLED(CONFIG_FIX_EARLYCON_MEM)) - early_fixmap_init(); + early_fixmap_init(); + early_ioremap_init(); parse_early_param(); @@ -965,9 +1035,12 @@ void __init setup_arch(char **cmdline_p) early_paging_init(mdesc); #endif setup_dma_zone(mdesc); + efi_init(); sanity_check_meminfo(); arm_memblock_init(mdesc); + early_ioremap_reset(); + paging_init(mdesc); request_standard_resources(mdesc); diff --git a/arch/arm/kernel/smccc-call.S b/arch/arm/kernel/smccc-call.S new file mode 100644 index 000000000..2e48b674a --- /dev/null +++ b/arch/arm/kernel/smccc-call.S @@ -0,0 +1,62 @@ +/* + * Copyright (c) 2015, Linaro Limited + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/linkage.h> + +#include <asm/opcodes-sec.h> +#include <asm/opcodes-virt.h> +#include <asm/unwind.h> + + /* + * Wrap c macros in asm macros to delay expansion until after the + * SMCCC asm macro is expanded. + */ + .macro SMCCC_SMC + __SMC(0) + .endm + + .macro SMCCC_HVC + __HVC(0) + .endm + + .macro SMCCC instr +UNWIND( .fnstart) + mov r12, sp + push {r4-r7} +UNWIND( .save {r4-r7}) + ldm r12, {r4-r7} + \instr + pop {r4-r7} + ldr r12, [sp, #(4 * 4)] + stm r12, {r0-r3} + bx lr +UNWIND( .fnend) + .endm + +/* + * void smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2, + * unsigned long a3, unsigned long a4, unsigned long a5, + * unsigned long a6, unsigned long a7, struct arm_smccc_res *res) + */ +ENTRY(arm_smccc_smc) + SMCCC SMCCC_SMC +ENDPROC(arm_smccc_smc) + +/* + * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2, + * unsigned long a3, unsigned long a4, unsigned long a5, + * unsigned long a6, unsigned long a7, struct arm_smccc_res *res) + */ +ENTRY(arm_smccc_hvc) + SMCCC SMCCC_HVC +ENDPROC(arm_smccc_hvc) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index b26361355..37312f674 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -69,11 +69,15 @@ enum ipi_msg_type { IPI_TIMER, IPI_RESCHEDULE, IPI_CALL_FUNC, - IPI_CALL_FUNC_SINGLE, IPI_CPU_STOP, IPI_IRQ_WORK, IPI_COMPLETION, - IPI_CPU_BACKTRACE = 15, + IPI_CPU_BACKTRACE, + /* + * SGI8-15 can be reserved by secure firmware, and thus may + * not be usable by the kernel. Please keep the above limited + * to at most 8 entries. + */ }; static DECLARE_COMPLETION(cpu_running); @@ -475,7 +479,6 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = { S(IPI_TIMER, "Timer broadcast interrupts"), S(IPI_RESCHEDULE, "Rescheduling interrupts"), S(IPI_CALL_FUNC, "Function call interrupts"), - S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"), S(IPI_CPU_STOP, "CPU stop interrupts"), S(IPI_IRQ_WORK, "IRQ work interrupts"), S(IPI_COMPLETION, "completion interrupts"), @@ -525,7 +528,7 @@ void arch_send_wakeup_ipi_mask(const struct cpumask *mask) void arch_send_call_function_single_ipi(int cpu) { - smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); + smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC); } #ifdef CONFIG_IRQ_WORK @@ -620,12 +623,6 @@ void handle_IPI(int ipinr, struct pt_regs *regs) irq_exit(); break; - case IPI_CALL_FUNC_SINGLE: - irq_enter(); - generic_smp_call_function_single_interrupt(); - irq_exit(); - break; - case IPI_CPU_STOP: irq_enter(); ipi_cpu_stop(cpu); diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index 54a5aeab9..994e971a8 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -224,7 +224,7 @@ static int install_vvar(struct mm_struct *mm, unsigned long addr) VM_READ | VM_MAYREAD, &vdso_data_mapping); - return IS_ERR(vma) ? PTR_ERR(vma) : 0; + return PTR_ERR_OR_ZERO(vma); } /* assumes mmap_sem is write-locked */ diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c index bdbb8853a..77a2eef72 100644 --- a/arch/arm/kernel/xscale-cp0.c +++ b/arch/arm/kernel/xscale-cp0.c @@ -15,6 +15,9 @@ #include <linux/init.h> #include <linux/io.h> #include <asm/thread_notify.h> +#include <asm/cputype.h> + +asm(" .arch armv5te\n"); static inline void dsp_save_state(u32 *state) { @@ -152,6 +155,10 @@ static int __init xscale_cp0_init(void) { u32 cp_access; + /* do not attempt to probe iwmmxt on non-xscale family CPUs */ + if (!cpu_is_xscale_family()) + return 0; + cp_access = xscale_cp_access_read() & ~3; xscale_cp_access_write(cp_access | 1); diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index e06fd299d..08e49c423 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -44,6 +44,7 @@ #include <asm/kvm_emulate.h> #include <asm/kvm_coproc.h> #include <asm/kvm_psci.h> +#include <asm/sections.h> #ifdef REQUIRES_VIRT __asm__(".arch_extension virt"); @@ -58,9 +59,12 @@ static DEFINE_PER_CPU(struct kvm_vcpu *, kvm_arm_running_vcpu); /* The VMID used in the VTTBR */ static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1); -static u8 kvm_next_vmid; +static u32 kvm_next_vmid; +static unsigned int kvm_vmid_bits __read_mostly; static DEFINE_SPINLOCK(kvm_vmid_lock); +static bool vgic_present; + static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu) { BUG_ON(preemptible()); @@ -132,7 +136,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) kvm->arch.vmid_gen = 0; /* The maximum number of VCPUs is limited by the host's GIC model */ - kvm->arch.max_vcpus = kvm_vgic_get_max_vcpus(); + kvm->arch.max_vcpus = vgic_present ? + kvm_vgic_get_max_vcpus() : KVM_MAX_VCPUS; return ret; out_free_stage2_pgd: @@ -172,6 +177,8 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) int r; switch (ext) { case KVM_CAP_IRQCHIP: + r = vgic_present; + break; case KVM_CAP_IOEVENTFD: case KVM_CAP_DEVICE_CTRL: case KVM_CAP_USER_MEMORY: @@ -433,11 +440,12 @@ static void update_vttbr(struct kvm *kvm) kvm->arch.vmid_gen = atomic64_read(&kvm_vmid_gen); kvm->arch.vmid = kvm_next_vmid; kvm_next_vmid++; + kvm_next_vmid &= (1 << kvm_vmid_bits) - 1; /* update vttbr to be used with the new vmid */ pgd_phys = virt_to_phys(kvm_get_hwpgd(kvm)); BUG_ON(pgd_phys & ~VTTBR_BADDR_MASK); - vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK; + vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK(kvm_vmid_bits); kvm->arch.vttbr = pgd_phys | vmid; spin_unlock(&kvm_vmid_lock); @@ -498,18 +506,18 @@ static void kvm_arm_resume_guest(struct kvm *kvm) struct kvm_vcpu *vcpu; kvm_for_each_vcpu(i, vcpu, kvm) { - wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); + struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu); vcpu->arch.pause = false; - wake_up_interruptible(wq); + swake_up(wq); } } static void vcpu_sleep(struct kvm_vcpu *vcpu) { - wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); + struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu); - wait_event_interruptible(*wq, ((!vcpu->arch.power_off) && + swait_event_interruptible(*wq, ((!vcpu->arch.power_off) && (!vcpu->arch.pause))); } @@ -603,6 +611,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) ret = kvm_call_hyp(__kvm_vcpu_run, vcpu); vcpu->mode = OUTSIDE_GUEST_MODE; + vcpu->stat.exits++; /* * Back from guest *************************************************************/ @@ -913,6 +922,8 @@ static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm, switch (dev_id) { case KVM_ARM_DEVICE_VGIC_V2: + if (!vgic_present) + return -ENXIO; return kvm_vgic_addr(kvm, type, &dev_addr->addr, true); default: return -ENODEV; @@ -927,6 +938,8 @@ long kvm_arch_vm_ioctl(struct file *filp, switch (ioctl) { case KVM_CREATE_IRQCHIP: { + if (!vgic_present) + return -ENXIO; return kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2); } case KVM_ARM_SET_DEVICE_ADDR: { @@ -1067,6 +1080,12 @@ static int init_hyp_mode(void) goto out_free_mappings; } + err = create_hyp_mappings(__start_rodata, __end_rodata); + if (err) { + kvm_err("Cannot map rodata section\n"); + goto out_free_mappings; + } + /* * Map the Hyp stack pages */ @@ -1111,8 +1130,17 @@ static int init_hyp_mode(void) * Init HYP view of VGIC */ err = kvm_vgic_hyp_init(); - if (err) + switch (err) { + case 0: + vgic_present = true; + break; + case -ENODEV: + case -ENXIO: + vgic_present = false; + break; + default: goto out_free_context; + } /* * Init HYP architected timer support @@ -1127,6 +1155,10 @@ static int init_hyp_mode(void) kvm_perf_init(); + /* set size of VMID supported by CPU */ + kvm_vmid_bits = kvm_get_vmid_bits(); + kvm_info("%d-bit VMID\n", kvm_vmid_bits); + kvm_info("Hyp mode initialized successfully\n"); return 0; diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c index d6c005283..dc9915985 100644 --- a/arch/arm/kvm/emulate.c +++ b/arch/arm/kvm/emulate.c @@ -275,6 +275,40 @@ static u32 exc_vector_base(struct kvm_vcpu *vcpu) return vbar; } +/* + * Switch to an exception mode, updating both CPSR and SPSR. Follow + * the logic described in AArch32.EnterMode() from the ARMv8 ARM. + */ +static void kvm_update_psr(struct kvm_vcpu *vcpu, unsigned long mode) +{ + unsigned long cpsr = *vcpu_cpsr(vcpu); + u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; + + *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | mode; + + switch (mode) { + case FIQ_MODE: + *vcpu_cpsr(vcpu) |= PSR_F_BIT; + /* Fall through */ + case ABT_MODE: + case IRQ_MODE: + *vcpu_cpsr(vcpu) |= PSR_A_BIT; + /* Fall through */ + default: + *vcpu_cpsr(vcpu) |= PSR_I_BIT; + } + + *vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT); + + if (sctlr & SCTLR_TE) + *vcpu_cpsr(vcpu) |= PSR_T_BIT; + if (sctlr & SCTLR_EE) + *vcpu_cpsr(vcpu) |= PSR_E_BIT; + + /* Note: These now point to the mode banked copies */ + *vcpu_spsr(vcpu) = cpsr; +} + /** * kvm_inject_undefined - inject an undefined exception into the guest * @vcpu: The VCPU to receive the undefined exception @@ -286,29 +320,13 @@ static u32 exc_vector_base(struct kvm_vcpu *vcpu) */ void kvm_inject_undefined(struct kvm_vcpu *vcpu) { - unsigned long new_lr_value; - unsigned long new_spsr_value; unsigned long cpsr = *vcpu_cpsr(vcpu); - u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; bool is_thumb = (cpsr & PSR_T_BIT); u32 vect_offset = 4; u32 return_offset = (is_thumb) ? 2 : 4; - new_spsr_value = cpsr; - new_lr_value = *vcpu_pc(vcpu) - return_offset; - - *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | UND_MODE; - *vcpu_cpsr(vcpu) |= PSR_I_BIT; - *vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT); - - if (sctlr & SCTLR_TE) - *vcpu_cpsr(vcpu) |= PSR_T_BIT; - if (sctlr & SCTLR_EE) - *vcpu_cpsr(vcpu) |= PSR_E_BIT; - - /* Note: These now point to UND banked copies */ - *vcpu_spsr(vcpu) = cpsr; - *vcpu_reg(vcpu, 14) = new_lr_value; + kvm_update_psr(vcpu, UND_MODE); + *vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) - return_offset; /* Branch to exception vector */ *vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset; @@ -320,30 +338,14 @@ void kvm_inject_undefined(struct kvm_vcpu *vcpu) */ static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr) { - unsigned long new_lr_value; - unsigned long new_spsr_value; unsigned long cpsr = *vcpu_cpsr(vcpu); - u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; bool is_thumb = (cpsr & PSR_T_BIT); u32 vect_offset; u32 return_offset = (is_thumb) ? 4 : 0; bool is_lpae; - new_spsr_value = cpsr; - new_lr_value = *vcpu_pc(vcpu) + return_offset; - - *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | ABT_MODE; - *vcpu_cpsr(vcpu) |= PSR_I_BIT | PSR_A_BIT; - *vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT); - - if (sctlr & SCTLR_TE) - *vcpu_cpsr(vcpu) |= PSR_T_BIT; - if (sctlr & SCTLR_EE) - *vcpu_cpsr(vcpu) |= PSR_E_BIT; - - /* Note: These now point to ABT banked copies */ - *vcpu_spsr(vcpu) = cpsr; - *vcpu_reg(vcpu, 14) = new_lr_value; + kvm_update_psr(vcpu, ABT_MODE); + *vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) + return_offset; if (is_pabt) vect_offset = 12; diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 3705fc292..99361f113 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -33,6 +33,12 @@ #define VCPU_STAT(x) { #x, offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU } struct kvm_stats_debugfs_item debugfs_entries[] = { + VCPU_STAT(hvc_exit_stat), + VCPU_STAT(wfe_exit_stat), + VCPU_STAT(wfi_exit_stat), + VCPU_STAT(mmio_exit_user), + VCPU_STAT(mmio_exit_kernel), + VCPU_STAT(exits), { NULL } }; diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 95f12b2cc..3ede90d8b 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -42,6 +42,7 @@ static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0), kvm_vcpu_hvc_get_imm(vcpu)); + vcpu->stat.hvc_exit_stat++; ret = kvm_psci_call(vcpu); if (ret < 0) { @@ -89,9 +90,11 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run) { if (kvm_vcpu_get_hsr(vcpu) & HSR_WFI_IS_WFE) { trace_kvm_wfx(*vcpu_pc(vcpu), true); + vcpu->stat.wfe_exit_stat++; kvm_vcpu_on_spin(vcpu); } else { trace_kvm_wfx(*vcpu_pc(vcpu), false); + vcpu->stat.wfi_exit_stat++; kvm_vcpu_block(vcpu); } diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index 3a10c9f1d..0f6600f05 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -206,12 +206,16 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, run->mmio.is_write = is_write; run->mmio.phys_addr = fault_ipa; run->mmio.len = len; - memcpy(run->mmio.data, data_buf, len); + if (is_write) + memcpy(run->mmio.data, data_buf, len); if (!ret) { /* We handled the access successfully in the kernel. */ + vcpu->stat.mmio_exit_kernel++; kvm_handle_mmio_return(vcpu, run); return 1; + } else { + vcpu->stat.mmio_exit_user++; } run->exit_reason = KVM_EXIT_MMIO; diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 61d96a645..aba61fd36 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -656,9 +656,9 @@ static void *kvm_alloc_hwpgd(void) * kvm_alloc_stage2_pgd - allocate level-1 table for stage-2 translation. * @kvm: The KVM struct pointer for the VM. * - * Allocates the 1st level table only of size defined by S2_PGD_ORDER (can - * support either full 40-bit input addresses or limited to 32-bit input - * addresses). Clears the allocated pages. + * Allocates only the stage-2 HW PGD level table(s) (can support either full + * 40-bit input addresses or limited to 32-bit input addresses). Clears the + * allocated pages. * * Note we don't need locking here as this is only called when the VM is * created, which can only be done once. @@ -992,9 +992,9 @@ out: return ret; } -static bool transparent_hugepage_adjust(pfn_t *pfnp, phys_addr_t *ipap) +static bool transparent_hugepage_adjust(kvm_pfn_t *pfnp, phys_addr_t *ipap) { - pfn_t pfn = *pfnp; + kvm_pfn_t pfn = *pfnp; gfn_t gfn = *ipap >> PAGE_SHIFT; if (PageTransCompound(pfn_to_page(pfn))) { @@ -1201,7 +1201,7 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm, kvm_mmu_write_protect_pt_masked(kvm, slot, gfn_offset, mask); } -static void coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn, +static void coherent_cache_guest_page(struct kvm_vcpu *vcpu, kvm_pfn_t pfn, unsigned long size, bool uncached) { __coherent_cache_guest_page(vcpu, pfn, size, uncached); @@ -1218,7 +1218,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, struct kvm *kvm = vcpu->kvm; struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache; struct vm_area_struct *vma; - pfn_t pfn; + kvm_pfn_t pfn; pgprot_t mem_type = PAGE_S2; bool fault_ipa_uncached; bool logging_active = memslot_is_logging(memslot); @@ -1346,7 +1346,7 @@ static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa) { pmd_t *pmd; pte_t *pte; - pfn_t pfn; + kvm_pfn_t pfn; bool pfn_valid = false; trace_kvm_access_fault(fault_ipa); diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c index a9b3b905e..c2b131527 100644 --- a/arch/arm/kvm/psci.c +++ b/arch/arm/kvm/psci.c @@ -70,7 +70,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) { struct kvm *kvm = source_vcpu->kvm; struct kvm_vcpu *vcpu = NULL; - wait_queue_head_t *wq; + struct swait_queue_head *wq; unsigned long cpu_id; unsigned long context_id; phys_addr_t target_pc; @@ -119,7 +119,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) smp_mb(); /* Make sure the above is visible */ wq = kvm_arch_vcpu_wq(vcpu); - wake_up_interruptible(wq); + swake_up(wq); return PSCI_RET_SUCCESS; } diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index af2267f6a..9397b2e53 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -205,6 +205,10 @@ Boston, MA 02111-1307, USA. */ .endm +#ifdef CONFIG_ARM_PATCH_IDIV + .align 3 +#endif + ENTRY(__udivsi3) ENTRY(__aeabi_uidiv) UNWIND(.fnstart) @@ -253,6 +257,10 @@ UNWIND(.fnstart) UNWIND(.fnend) ENDPROC(__umodsi3) +#ifdef CONFIG_ARM_PATCH_IDIV + .align 3 +#endif + ENTRY(__divsi3) ENTRY(__aeabi_idiv) UNWIND(.fnstart) diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 588bbc288..6bd1089b0 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -52,14 +52,13 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) * * Lock the page table for the destination and check * to see that it's still huge and whether or not we will - * need to fault on write, or if we have a splitting THP. + * need to fault on write. */ if (unlikely(pmd_thp_or_huge(*pmd))) { ptl = ¤t->mm->page_table_lock; spin_lock(ptl); if (unlikely(!pmd_thp_or_huge(*pmd) - || pmd_hugewillfault(*pmd) - || pmd_trans_splitting(*pmd))) { + || pmd_hugewillfault(*pmd))) { spin_unlock(ptl); return 0; } diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig index 2c44b9305..5c2d54f59 100644 --- a/arch/arm/mach-alpine/Kconfig +++ b/arch/arm/mach-alpine/Kconfig @@ -1,5 +1,6 @@ config ARCH_ALPINE - bool "Annapurna Labs Alpine platform" if ARCH_MULTI_V7 + bool "Annapurna Labs Alpine platform" + depends on ARCH_MULTI_V7 select ARM_AMBA select ARM_GIC select GENERIC_IRQ_CHIP diff --git a/arch/arm/mach-alpine/platsmp.c b/arch/arm/mach-alpine/platsmp.c index f78429f48..dd77ea25e 100644 --- a/arch/arm/mach-alpine/platsmp.c +++ b/arch/arm/mach-alpine/platsmp.c @@ -42,7 +42,7 @@ static void __init alpine_smp_prepare_cpus(unsigned int max_cpus) alpine_cpu_pm_init(); } -static struct smp_operations alpine_smp_ops __initdata = { +static const struct smp_operations alpine_smp_ops __initconst = { .smp_prepare_cpus = alpine_smp_prepare_cpus, .smp_boot_secondary = alpine_boot_secondary, }; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 28656c2b5..23be2e433 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -8,7 +8,8 @@ menuconfig ARCH_AT91 if ARCH_AT91 config SOC_SAMA5D2 - bool "SAMA5D2 family" if ARCH_MULTI_V7 + bool "SAMA5D2 family" + depends on ARCH_MULTI_V7 select SOC_SAMA5 select CACHE_L2X0 select HAVE_FB_ATMEL @@ -21,7 +22,8 @@ config SOC_SAMA5D2 Select this if ou are using one of Atmel's SAMA5D2 family SoC. config SOC_SAMA5D3 - bool "SAMA5D3 family" if ARCH_MULTI_V7 + bool "SAMA5D3 family" + depends on ARCH_MULTI_V7 select SOC_SAMA5 select HAVE_FB_ATMEL select HAVE_AT91_UTMI @@ -33,7 +35,8 @@ config SOC_SAMA5D3 This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36. config SOC_SAMA5D4 - bool "SAMA5D4 family" if ARCH_MULTI_V7 + bool "SAMA5D4 family" + depends on ARCH_MULTI_V7 select SOC_SAMA5 select CACHE_L2X0 select HAVE_FB_ATMEL @@ -46,7 +49,8 @@ config SOC_SAMA5D4 Select this if you are using one of Atmel's SAMA5D4 family SoC. config SOC_AT91RM9200 - bool "AT91RM9200" if ARCH_MULTI_V4T + bool "AT91RM9200" + depends on ARCH_MULTI_V4T select ATMEL_AIC_IRQ select ATMEL_ST select CPU_ARM920T @@ -59,7 +63,8 @@ config SOC_AT91RM9200 Select this if you are using Atmel's AT91RM9200 SoC. config SOC_AT91SAM9 - bool "AT91SAM9" if ARCH_MULTI_V5 + bool "AT91SAM9" + depends on ARCH_MULTI_V5 select ATMEL_AIC_IRQ select ATMEL_SDRAMC select CPU_ARM926T diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig index 8be7e0ae1..6c6d5e765 100644 --- a/arch/arm/mach-axxia/Kconfig +++ b/arch/arm/mach-axxia/Kconfig @@ -1,5 +1,6 @@ config ARCH_AXXIA - bool "LSI Axxia platforms" if (ARCH_MULTI_V7 && ARM_LPAE) + bool "LSI Axxia platforms" + depends on ARCH_MULTI_V7 && ARM_LPAE select ARCH_DMA_ADDR_T_64BIT select ARM_AMBA select ARM_GIC diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c index 959d4df3d..ffbd71d45 100644 --- a/arch/arm/mach-axxia/platsmp.c +++ b/arch/arm/mach-axxia/platsmp.c @@ -82,7 +82,7 @@ static void __init axxia_smp_prepare_cpus(unsigned int max_cpus) } } -static struct smp_operations axxia_smp_ops __initdata = { +static const struct smp_operations axxia_smp_ops __initconst = { .smp_prepare_cpus = axxia_smp_prepare_cpus, .smp_boot_secondary = axxia_boot_secondary, }; diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 8c53c55be..7ef121472 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_BCM - bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7 + bool "Broadcom SoC Support" + depends on ARCH_MULTI_V6_V7 help This enables support for Broadcom ARM based SoC chips @@ -27,7 +28,8 @@ config ARCH_BCM_IPROC Currently supported SoCs are Cygnus. config ARCH_BCM_CYGNUS - bool "Broadcom Cygnus Support" if ARCH_MULTI_V7 + bool "Broadcom Cygnus Support" + depends on ARCH_MULTI_V7 select ARCH_BCM_IPROC help Enable support for the Cygnus family, @@ -36,10 +38,13 @@ config ARCH_BCM_CYGNUS BCM58300, BCM58302, BCM58303, BCM58305. config ARCH_BCM_NSP - bool "Broadcom Northstar Plus SoC Support" if ARCH_MULTI_V7 + bool "Broadcom Northstar Plus SoC Support" + depends on ARCH_MULTI_V7 select ARCH_BCM_IPROC select ARM_ERRATA_754322 select ARM_ERRATA_775420 + select ARM_ERRATA_764369 if SMP + select HAVE_SMP help Support for Broadcom Northstar Plus SoC. Broadcom Northstar Plus family of SoCs are used for switching control @@ -50,8 +55,14 @@ config ARCH_BCM_NSP NAND flash, SATA and several other IO controllers. config ARCH_BCM_5301X - bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7 + bool "Broadcom BCM470X / BCM5301X ARM SoC" + depends on ARCH_MULTI_V7 select ARCH_BCM_IPROC + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 + select ARM_ERRATA_764369 if SMP + select HAVE_SMP + help Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores. @@ -82,7 +93,8 @@ config ARCH_BCM_MOBILE This enables support for systems based on Broadcom mobile SoCs. config ARCH_BCM_281XX - bool "Broadcom BCM281XX SoC family" if ARCH_MULTI_V7 + bool "Broadcom BCM281XX SoC family" + depends on ARCH_MULTI_V7 select ARCH_BCM_MOBILE select HAVE_SMP help @@ -91,7 +103,8 @@ config ARCH_BCM_281XX variants. config ARCH_BCM_21664 - bool "Broadcom BCM21664 SoC family" if ARCH_MULTI_V7 + bool "Broadcom BCM21664 SoC family" + depends on ARCH_MULTI_V7 select ARCH_BCM_MOBILE select HAVE_SMP help @@ -122,20 +135,23 @@ config ARCH_BCM_MOBILE_SMP comment "Other Architectures" config ARCH_BCM2835 - bool "Broadcom BCM2835 family" if ARCH_MULTI_V6 + bool "Broadcom BCM2835 family" + depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_AMBA - select ARM_ERRATA_411920 + select ARM_ERRATA_411920 if ARCH_MULTI_V6 select ARM_TIMER_SP804 + select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 select CLKSRC_OF select PINCTRL select PINCTRL_BCM2835 help - This enables support for the Broadcom BCM2835 SoC. This SoC is - used in the Raspberry Pi and Roku 2 devices. + This enables support for the Broadcom BCM2835 and BCM2836 SoCs. + This SoC is used in the Raspberry Pi and Roku 2 devices. config ARCH_BCM_63XX - bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7 + bool "Broadcom BCM63xx DSL SoC" + depends on ARCH_MULTI_V7 depends on MMU select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP @@ -152,7 +168,8 @@ config ARCH_BCM_63XX the BCM63138 variant. config ARCH_BRCMSTB - bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7 + bool "Broadcom BCM7XXX based boards" + depends on ARCH_MULTI_V7 select ARM_GIC select ARM_ERRATA_798181 if SMP select HAVE_ARM_ARCH_TIMER diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 892261fec..7d665151c 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -14,7 +14,11 @@ obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o # Northstar Plus -obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o +obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o + +ifeq ($(CONFIG_ARCH_BCM_NSP),y) +obj-$(CONFIG_SMP) += platsmp.o +endif # BCM281XX obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o @@ -23,7 +27,7 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o # BCM281XX and BCM21664 SMP support -obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o +obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o # BCM281XX and BCM21664 L2 cache control obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o @@ -39,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o # BCM5301X obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o +ifeq ($(CONFIG_ARCH_BCM_5301X),y) +obj-$(CONFIG_SMP) += platsmp.o +endif # BCM63XXx ifeq ($(CONFIG_ARCH_BCM_63XX),y) diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c index 19be90421..9b6727ed6 100644 --- a/arch/arm/mach-bcm/bcm63xx_smp.c +++ b/arch/arm/mach-bcm/bcm63xx_smp.c @@ -161,7 +161,7 @@ static void __init bcm63138_smp_prepare_cpus(unsigned int max_cpus) } } -struct smp_operations bcm63138_smp_ops __initdata = { +static const struct smp_operations bcm63138_smp_ops __initconst = { .smp_prepare_cpus = bcm63138_smp_prepare_cpus, .smp_boot_secondary = bcm63138_smp_boot_secondary, }; diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c index 5478fe6bc..c8830a2b0 100644 --- a/arch/arm/mach-bcm/bcm_5301x.c +++ b/arch/arm/mach-bcm/bcm_5301x.c @@ -9,40 +9,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> -#include <asm/siginfo.h> -#include <asm/signal.h> - - -static bool first_fault = true; - -static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr, - struct pt_regs *regs) -{ - if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) { - first_fault = false; - - /* - * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens - * for no good reason, possibly left over from the CFE boot - * loader. - */ - pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n", - addr, fsr); - - /* Returning non-zero causes fault display and panic */ - return 0; - } - - /* Others should cause a fault */ - return 1; -} - -static void __init bcm5301x_init_early(void) -{ - /* Install our hook */ - hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR, - "imprecise external abort"); -} static const char *const bcm5301x_dt_compat[] __initconst = { "brcm,bcm4708", @@ -52,6 +18,5 @@ static const char *const bcm5301x_dt_compat[] __initconst = { DT_MACHINE_START(BCM5301X, "BCM5301X") .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .init_early = bcm5301x_init_early, .dt_compat = bcm5301x_dt_compat, MACHINE_END diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 0f7b9eac3..834d67684 100644 --- a/arch/arm/mach-bcm/board_bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c @@ -36,7 +36,12 @@ static void __init bcm2835_init(void) } static const char * const bcm2835_compat[] = { +#ifdef CONFIG_ARCH_MULTI_V6 "brcm,bcm2835", +#endif +#ifdef CONFIG_ARCH_MULTI_V7 + "brcm,bcm2836", +#endif NULL }; diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c index 44d6bddf7..40dc84484 100644 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -356,7 +356,7 @@ static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } -static struct smp_operations brcmstb_smp_ops __initdata = { +static const struct smp_operations brcmstb_smp_ops __initconst = { .smp_prepare_cpus = brcmstb_cpu_ctrl_setup, .smp_boot_secondary = brcmstb_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-bcm/kona_smp.c b/arch/arm/mach-bcm/platsmp.c index 66a046552..575defcc5 100644 --- a/arch/arm/mach-bcm/kona_smp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Broadcom Corporation + * Copyright (C) 2014-2015 Broadcom Corporation * Copyright 2014 Linaro Limited * * This program is free software; you can redistribute it and/or @@ -12,12 +12,17 @@ * GNU General Public License for more details. */ -#include <linux/init.h> +#include <linux/cpumask.h> +#include <linux/delay.h> #include <linux/errno.h> +#include <linux/init.h> #include <linux/io.h> +#include <linux/jiffies.h> #include <linux/of.h> #include <linux/sched.h> +#include <linux/smp.h> +#include <asm/cacheflush.h> #include <asm/smp.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> @@ -30,9 +35,10 @@ /* Name of device node property defining secondary boot register location */ #define OF_SECONDARY_BOOT "secondary-boot-reg" +#define MPIDR_CPUID_BITMASK 0x3 /* I/O address of register used to coordinate secondary core startup */ -static u32 secondary_boot; +static u32 secondary_boot_addr; /* * Enable the Cortex A9 Snoop Control Unit @@ -75,47 +81,101 @@ static int __init scu_a9_enable(void) return 0; } +static int nsp_write_lut(void) +{ + void __iomem *sku_rom_lut; + phys_addr_t secondary_startup_phy; + + if (!secondary_boot_addr) { + pr_warn("required secondary boot register not specified\n"); + return -EINVAL; + } + + sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr, + sizeof(secondary_boot_addr)); + if (!sku_rom_lut) { + pr_warn("unable to ioremap SKU-ROM LUT register\n"); + return -ENOMEM; + } + + secondary_startup_phy = virt_to_phys(secondary_startup); + BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX); + + writel_relaxed(secondary_startup_phy, sku_rom_lut); + + /* Ensure the write is visible to the secondary core */ + smp_wmb(); + + iounmap(sku_rom_lut); + + return 0; +} + static void __init bcm_smp_prepare_cpus(unsigned int max_cpus) { static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 }; - struct device_node *node; + struct device_node *cpus_node = NULL; + struct device_node *cpu_node = NULL; int ret; - BUG_ON(secondary_boot); /* We're called only once */ - /* * This function is only called via smp_ops->smp_prepare_cpu(). * That only happens if a "/cpus" device tree node exists * and has an "enable-method" property that selects the SMP * operations defined herein. */ - node = of_find_node_by_path("/cpus"); - BUG_ON(!node); + cpus_node = of_find_node_by_path("/cpus"); + if (!cpus_node) + return; - /* - * Our secondary enable method requires a "secondary-boot-reg" - * property to specify a register address used to request the - * ROM code boot a secondary code. If we have any trouble - * getting this we fall back to uniprocessor mode. - */ - if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) { - pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n", - node->name); - ret = -ENOENT; /* Arrange to disable SMP */ - goto out; + for_each_child_of_node(cpus_node, cpu_node) { + u32 cpuid; + + if (of_node_cmp(cpu_node->type, "cpu")) + continue; + + if (of_property_read_u32(cpu_node, "reg", &cpuid)) { + pr_debug("%s: missing reg property\n", + cpu_node->full_name); + ret = -ENOENT; + goto out; + } + + /* + * "secondary-boot-reg" property should be defined only + * for secondary cpu + */ + if ((cpuid & MPIDR_CPUID_BITMASK) == 1) { + /* + * Our secondary enable method requires a + * "secondary-boot-reg" property to specify a register + * address used to request the ROM code boot a secondary + * core. If we have any trouble getting this we fall + * back to uniprocessor mode. + */ + if (of_property_read_u32(cpu_node, + OF_SECONDARY_BOOT, + &secondary_boot_addr)) { + pr_warn("%s: no" OF_SECONDARY_BOOT "property\n", + cpu_node->name); + ret = -ENOENT; + goto out; + } + } } /* - * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is + * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is * returned, the SoC reported a uniprocessor configuration. * We bail on any other error. */ ret = scu_a9_enable(); out: - of_node_put(node); + of_node_put(cpu_node); + of_node_put(cpus_node); + if (ret) { /* Update the CPU present map to reflect uniprocessor mode */ - BUG_ON(ret != -ENOENT); pr_warn("disabling SMP\n"); init_cpu_present(&only_cpu_0); } @@ -139,7 +199,7 @@ out: * - Wait for the secondary boot register to be re-written, which * indicates the secondary core has started. */ -static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle) { void __iomem *boot_reg; phys_addr_t boot_func; @@ -154,15 +214,16 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle) return -EINVAL; } - if (!secondary_boot) { + if (!secondary_boot_addr) { pr_err("required secondary boot register not specified\n"); return -EINVAL; } - boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32)); + boot_reg = ioremap_nocache( + (phys_addr_t)secondary_boot_addr, sizeof(u32)); if (!boot_reg) { pr_err("unable to map boot register for cpu %u\n", cpu_id); - return -ENOSYS; + return -ENOMEM; } /* @@ -191,12 +252,39 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle) pr_err("timeout waiting for cpu %u to start\n", cpu_id); - return -ENOSYS; + return -ENXIO; } -static struct smp_operations bcm_smp_ops __initdata = { +static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + int ret; + + /* + * After wake up, secondary core branches to the startup + * address programmed at SKU ROM LUT location. + */ + ret = nsp_write_lut(); + if (ret) { + pr_err("unable to write startup addr to SKU ROM LUT\n"); + goto out; + } + + /* Send a CPU wakeup interrupt to the secondary core */ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + +out: + return ret; +} + +static const struct smp_operations bcm_smp_ops __initconst = { .smp_prepare_cpus = bcm_smp_prepare_cpus, - .smp_boot_secondary = bcm_boot_secondary, + .smp_boot_secondary = kona_boot_secondary, }; CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method", &bcm_smp_ops); + +struct smp_operations nsp_smp_ops __initdata = { + .smp_prepare_cpus = bcm_smp_prepare_cpus, + .smp_boot_secondary = nsp_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops); diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 742d53a5f..ffbfa0bd0 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_BERLIN - bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 + bool "Marvell Berlin SoCs" + depends on ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB select ARM_GIC diff --git a/arch/arm/mach-berlin/platsmp.c b/arch/arm/mach-berlin/platsmp.c index 405cd37e4..93f90688d 100644 --- a/arch/arm/mach-berlin/platsmp.c +++ b/arch/arm/mach-berlin/platsmp.c @@ -119,7 +119,7 @@ static int berlin_cpu_kill(unsigned int cpu) } #endif -static struct smp_operations berlin_smp_ops __initdata = { +static const struct smp_operations berlin_smp_ops __initconst = { .smp_prepare_cpus = berlin_smp_prepare_cpus, .smp_boot_secondary = berlin_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c index c3d964221..ba3d7d1b2 100644 --- a/arch/arm/mach-clps711x/board-autcpu12.c +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -31,7 +31,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand-gpio.h> #include <linux/platform_device.h> -#include <linux/basic_mmio_gpio.h> +#include <linux/gpio/driver.h> #include <mach/hardware.h> #include <asm/sizes.h> diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c index e68dd629b..80a16a8b3 100644 --- a/arch/arm/mach-clps711x/board-p720t.c +++ b/arch/arm/mach-clps711x/board-p720t.c @@ -28,7 +28,7 @@ #include <linux/leds.h> #include <linux/sizes.h> #include <linux/backlight.h> -#include <linux/basic_mmio_gpio.h> +#include <linux/gpio/driver.h> #include <linux/platform_device.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand-gpio.h> diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 3c22a1990..eb14a0ff0 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_CNS3XXX - bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 + bool "Cavium Networks CNS3XXX family" + depends on ARCH_MULTI_V6 select ARM_GIC select PCI_DOMAINS if PCI help diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index dd8f5312b..bcaf1d025 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -34,7 +34,8 @@ config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR select ARCH_DAVINCI_DA8XX - select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 + # needed on silicon revs 1.0, 1.1: + select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE select CP_INTC config ARCH_DAVINCI_DA850 diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index f8f62fbaa..3d8cf8cbd 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -32,7 +32,7 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include <mach/cp_intc.h> +#include "cp_intc.h" #include <mach/mux.h> #include <mach/da8xx.h> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1ed545cc2..8e4539f69 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -40,17 +40,17 @@ #include <linux/spi/flash.h> #include <mach/common.h> -#include <mach/cp_intc.h> +#include "cp_intc.h" #include <mach/da8xx.h> #include <mach/mux.h> -#include <mach/sram.h> +#include "sram.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/system_info.h> -#include <media/tvp514x.h> -#include <media/adv7343.h> +#include <media/i2c/tvp514x.h> +#include <media/i2c/adv7343.h> #define DA850_EVM_PHY_ID "davinci_mdio-0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index b46b4d25f..1844076f6 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -19,7 +19,7 @@ #include <linux/gpio.h> #include <linux/clk.h> #include <linux/videodev2.h> -#include <media/tvp514x.h> +#include <media/i2c/tvp514x.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> #include <linux/platform_data/gpio-davinci.h> @@ -384,9 +384,7 @@ static __init void dm355_evm_init(void) dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1); aemif = clk_get(&dm355evm_dm9000.dev, "aemif"); - if (IS_ERR(aemif)) - WARN("%s: unable to get AEMIF clock\n", __func__); - else + if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n")) clk_prepare_enable(aemif); platform_add_devices(davinci_evm_devices, diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 680a7a2d9..284ff27c1 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -242,9 +242,7 @@ static __init void dm355_leopard_init(void) dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9); aemif = clk_get(&dm355leopard_dm9000.dev, "aemif"); - if (IS_ERR(aemif)) - WARN("%s: unable to get AEMIF clock\n", __func__); - else + if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n")) clk_prepare_enable(aemif); platform_add_devices(davinci_leopard_devices, diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index a75600359..f073518f6 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -40,8 +40,8 @@ #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/keyscan-davinci.h> -#include <media/ths7303.h> -#include <media/tvp514x.h> +#include <media/i2c/ths7303.h> +#include <media/i2c/tvp514x.h> #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index bbdd2d614..7a20507a3 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -26,7 +26,7 @@ #include <linux/v4l2-dv-timings.h> #include <linux/export.h> -#include <media/tvp514x.h> +#include <media/i2c/tvp514x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 846a84ddc..ee6ab7e8d 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -25,8 +25,8 @@ #include <linux/platform_data/at24.h> #include <linux/i2c/pcf857x.h> -#include <media/tvp514x.h> -#include <media/adv7343.h> +#include <media/i2c/tvp514x.h> +#include <media/i2c/adv7343.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 8cfbfe084..de1316bf6 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -26,7 +26,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> -#include <mach/cp_intc.h> +#include "cp_intc.h" #include <mach/da8xx.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 2aac51d0e..ee624861c 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -19,7 +19,7 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include <mach/cp_intc.h> +#include "cp_intc.h" #include <mach/da8xx.h> #include <mach/mux.h> diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 3caff9637..3424eac6b 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -23,7 +23,7 @@ #include <mach/hardware.h> #include <mach/clock.h> -#include <mach/psc.h> +#include "psc.h" #include <mach/cputype.h> #include "clock.h" diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index 507aad4b8..1a68d2477 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -19,7 +19,7 @@ #include <linux/of_irq.h> #include <mach/common.h> -#include <mach/cp_intc.h> +#include "cp_intc.h" static inline unsigned int cp_intc_read(unsigned offset) { diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/cp_intc.h index 827bbe9ba..827bbe9ba 100644 --- a/arch/arm/mach-davinci/include/mach/cp_intc.h +++ b/arch/arm/mach-davinci/cp_intc.h diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index 306ebc515..1b8f08532 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -19,8 +19,8 @@ #include <linux/export.h> #include <asm/cpuidle.h> -#include <mach/cpuidle.h> -#include <mach/ddr2.h> +#include "cpuidle.h" +#include "ddr2.h" #define DAVINCI_CPUIDLE_MAX_STATES 2 diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/cpuidle.h index 74f088b0e..74f088b0e 100644 --- a/arch/arm/mach-davinci/include/mach/cpuidle.h +++ b/arch/arm/mach-davinci/cpuidle.h diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 115d5736d..7187e7fc2 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -15,7 +15,7 @@ #include <asm/mach/map.h> -#include <mach/psc.h> +#include "psc.h" #include <mach/irqs.h> #include <mach/cputype.h> #include <mach/common.h> diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 676997895..97d8779a9 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -22,7 +22,7 @@ #include <asm/mach/map.h> -#include <mach/psc.h> +#include "psc.h" #include <mach/irqs.h> #include <mach/cputype.h> #include <mach/common.h> diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index 06b645122..c4b5808ca 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -15,7 +15,7 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include <mach/cp_intc.h> +#include "cp_intc.h" #include <mach/da8xx.h> #define DA8XX_NUM_UARTS 3 diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/ddr2.h index c19e047d0..c19e047d0 100644 --- a/arch/arm/mach-davinci/include/mach/ddr2.h +++ b/arch/arm/mach-davinci/ddr2.h diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 28c90bc37..e88b7a5cd 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -22,8 +22,8 @@ #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> -#include <mach/cpuidle.h> -#include <mach/sram.h> +#include "cpuidle.h" +#include "sram.h" #include "clock.h" #include "asp.h" diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 609950b8c..c7c1458df 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -21,7 +21,7 @@ #include <asm/mach/map.h> #include <mach/cputype.h> -#include <mach/psc.h> +#include "psc.h" #include <mach/mux.h> #include <mach/irqs.h> #include <mach/time.h> diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 2068cbeae..01843fbcc 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -26,7 +26,7 @@ #include <asm/mach/map.h> #include <mach/cputype.h> -#include <mach/psc.h> +#include "psc.h" #include <mach/mux.h> #include <mach/irqs.h> #include <mach/time.h> diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index d38f5049d..b28071ae3 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -19,7 +19,7 @@ #include <mach/cputype.h> #include <mach/irqs.h> -#include <mach/psc.h> +#include "psc.h" #include <mach/mux.h> #include <mach/time.h> #include <mach/serial.h> diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 70eb42725..cf80786e2 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -20,7 +20,7 @@ #include <mach/cputype.h> #include <mach/irqs.h> -#include <mach/psc.h> +#include "psc.h" #include <mach/mux.h> #include <mach/time.h> #include <mach/serial.h> diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index 07e23ba61..8929569b1 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -21,7 +21,7 @@ #include <mach/common.h> #include <mach/da8xx.h> -#include <mach/sram.h> +#include "sram.h" #include <mach/pm.h> #include "clock.h" diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 82fdc69d5..e5dc6bfde 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -23,7 +23,7 @@ #include <linux/io.h> #include <mach/cputype.h> -#include <mach/psc.h> +#include "psc.h" #include "clock.h" diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/psc.h index 99d47cfa3..99d47cfa3 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/psc.h diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index a5336a5e2..cd350dee4 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -21,8 +21,8 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/psc.h> -#include <mach/ddr2.h> +#include "psc.h" +#include "ddr2.h" #include "clock.h" diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index 8540dddf1..668b6e749 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -14,7 +14,7 @@ #include <linux/genalloc.h> #include <mach/common.h> -#include <mach/sram.h> +#include "sram.h" static struct gen_pool *sram_pool; diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/sram.h index 4e5db5621..4e5db5621 100644 --- a/arch/arm/mach-davinci/include/mach/sram.h +++ b/arch/arm/mach-davinci/sram.h diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c index 0dc39cf30..b9a7c33db 100644 --- a/arch/arm/mach-dove/cm-a510.c +++ b/arch/arm/mach-dove/cm-a510.c @@ -88,6 +88,7 @@ static void __init cm_a510_init(void) MACHINE_START(CM_A510, "Compulab CM-A510 Board") .atag_offset = 0x100, + .nr_irqs = DOVE_NR_IRQS, .init_machine = cm_a510_init, .map_io = dove_map_io, .init_early = dove_init_early, diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 0d1a89298..0cdaa3851 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -16,6 +16,7 @@ #include <linux/platform_data/dma-mv_xor.h> #include <linux/platform_data/usb-ehci-orion.h> #include <linux/platform_device.h> +#include <linux/soc/dove/pmu.h> #include <asm/hardware/cache-tauros2.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -375,6 +376,47 @@ void __init dove_setup_cpu_wins(void) DOVE_SCRATCHPAD_SIZE); } +static struct resource orion_wdt_resource[] = { + DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04), + DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04), +}; + +static struct platform_device orion_wdt_device = { + .name = "orion_wdt", + .id = -1, + .num_resources = ARRAY_SIZE(orion_wdt_resource), + .resource = orion_wdt_resource, +}; + +static void __init __maybe_unused orion_wdt_init(void) +{ + platform_device_register(&orion_wdt_device); +} + +static const struct dove_pmu_domain_initdata pmu_domains[] __initconst = { + { + .pwr_mask = PMU_PWR_VPU_PWR_DWN_MASK, + .rst_mask = PMU_SW_RST_VIDEO_MASK, + .iso_mask = PMU_ISO_VIDEO_MASK, + .name = "vpu-domain", + }, { + .pwr_mask = PMU_PWR_GPU_PWR_DWN_MASK, + .rst_mask = PMU_SW_RST_GPU_MASK, + .iso_mask = PMU_ISO_GPU_MASK, + .name = "gpu-domain", + }, { + /* sentinel */ + }, +}; + +static const struct dove_pmu_initdata pmu_data __initconst = { + .pmc_base = DOVE_PMU_VIRT_BASE, + .pmu_base = DOVE_PMU_VIRT_BASE + 0x8000, + .irq = IRQ_DOVE_PMU, + .irq_domain_start = IRQ_DOVE_PMU_START, + .domains = pmu_domains, +}; + void __init dove_init(void) { pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", @@ -389,6 +431,7 @@ void __init dove_init(void) dove_clk_init(); /* internal devices that every board has */ + dove_init_pmu_legacy(&pmu_data); dove_rtc_init(); dove_xor0_init(); dove_xor1_init(); diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c index 76e26f949..bcb678fd2 100644 --- a/arch/arm/mach-dove/dove-db-setup.c +++ b/arch/arm/mach-dove/dove-db-setup.c @@ -94,6 +94,7 @@ static void __init dove_db_init(void) MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board") .atag_offset = 0x100, + .nr_irqs = DOVE_NR_IRQS, .init_machine = dove_db_init, .map_io = dove_map_io, .init_early = dove_init_early, diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index 0c4b35f4e..00f45458b 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_DOVE_H #define __ASM_ARCH_DOVE_H +#include <mach/irqs.h> + /* * Marvell Dove address maps. * diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S deleted file mode 100644 index df1d44bdc..000000000 --- a/arch/arm/mach-dove/include/mach/entry-macro.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Marvell Dove platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <mach/bridge-regs.h> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ check low interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] - ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] - mov \irqnr, #32 - ands \irqstat, \irqstat, \tmp - - @ if no low interrupts set, check high interrupts - ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] - ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF] - moveq \irqnr, #64 - andeqs \irqstat, \irqstat, \tmp - - @ find first active interrupt source - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h index 3f29e6bca..8ff0fa8b4 100644 --- a/arch/arm/mach-dove/include/mach/irqs.h +++ b/arch/arm/mach-dove/include/mach/irqs.h @@ -90,7 +90,7 @@ #define NR_PMU_IRQS 7 #define IRQ_DOVE_RTC (IRQ_DOVE_PMU_START + 5) -#define NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS) +#define DOVE_NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS) #endif diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index b47f75038..d22b9b174 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -51,22 +51,14 @@ #define CLOCK_GATING_GIGA_PHY_MASK (1 << CLOCK_GATING_BIT_GIGA_PHY) #define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50) -#define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54) -static inline int pmu_to_irq(int pin) -{ - if (pin < NR_PMU_IRQS) - return pin + IRQ_DOVE_PMU_START; +#define PMU_SW_RST_VIDEO_MASK BIT(16) +#define PMU_SW_RST_GPU_MASK BIT(18) - return -EINVAL; -} +#define PMU_PWR_GPU_PWR_DWN_MASK BIT(2) +#define PMU_PWR_VPU_PWR_DWN_MASK BIT(3) -static inline int irq_to_pmu(int irq) -{ - if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS) - return irq - IRQ_DOVE_PMU_START; - - return -EINVAL; -} +#define PMU_ISO_VIDEO_MASK BIT(0) +#define PMU_ISO_GPU_MASK BIT(1) #endif diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index bfb370335..d6627c1f7 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -7,87 +7,15 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - -#include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/io.h> -#include <asm/mach/arch.h> +#include <asm/exception.h> #include <plat/irq.h> -#include <asm/mach/irq.h> -#include <mach/pm.h> #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include "common.h" -static void pmu_irq_mask(struct irq_data *d) -{ - int pin = irq_to_pmu(d->irq); - u32 u; - - u = readl(PMU_INTERRUPT_MASK); - u &= ~(1 << (pin & 31)); - writel(u, PMU_INTERRUPT_MASK); -} - -static void pmu_irq_unmask(struct irq_data *d) -{ - int pin = irq_to_pmu(d->irq); - u32 u; - - u = readl(PMU_INTERRUPT_MASK); - u |= 1 << (pin & 31); - writel(u, PMU_INTERRUPT_MASK); -} - -static void pmu_irq_ack(struct irq_data *d) -{ - int pin = irq_to_pmu(d->irq); - u32 u; - - /* - * The PMU mask register is not RW0C: it is RW. This means that - * the bits take whatever value is written to them; if you write - * a '1', you will set the interrupt. - * - * Unfortunately this means there is NO race free way to clear - * these interrupts. - * - * So, let's structure the code so that the window is as small as - * possible. - */ - u = ~(1 << (pin & 31)); - u &= readl_relaxed(PMU_INTERRUPT_CAUSE); - writel_relaxed(u, PMU_INTERRUPT_CAUSE); -} - -static struct irq_chip pmu_irq_chip = { - .name = "pmu_irq", - .irq_mask = pmu_irq_mask, - .irq_unmask = pmu_irq_unmask, - .irq_ack = pmu_irq_ack, -}; - -static void pmu_irq_handler(struct irq_desc *desc) -{ - unsigned long cause = readl(PMU_INTERRUPT_CAUSE); - unsigned int irq; - - cause &= readl(PMU_INTERRUPT_MASK); - if (cause == 0) { - do_bad_IRQ(desc); - return; - } - - for (irq = 0; irq < NR_PMU_IRQS; irq++) { - if (!(cause & (1 << irq))) - continue; - irq = pmu_to_irq(irq); - generic_handle_irq(irq); - } -} - static int __initdata gpio0_irqs[4] = { IRQ_DOVE_GPIO_0_7, IRQ_DOVE_GPIO_8_15, @@ -109,14 +37,6 @@ static int __initdata gpio2_irqs[4] = { 0, }; -#ifdef CONFIG_MULTI_IRQ_HANDLER -/* - * Compiling with both non-DT and DT support enabled, will - * break asm irq handler used by non-DT boards. Therefore, - * we provide a C-style irq handler even for non-DT boards, - * if MULTI_IRQ_HANDLER is set. - */ - static void __iomem *dove_irq_base = IRQ_VIRT_BASE; static asmlinkage void @@ -139,18 +59,13 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs) return; } } -#endif void __init dove_init_irq(void) { - int i; - orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); -#ifdef CONFIG_MULTI_IRQ_HANDLER set_handle_irq(dove_legacy_handle_irq); -#endif /* * Initialize gpiolib for GPIOs 0-71. @@ -163,17 +78,4 @@ void __init dove_init_irq(void) orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 64, gpio2_irqs); - - /* - * Mask and clear PMU interrupts - */ - writel(0, PMU_INTERRUPT_MASK); - writel(0, PMU_INTERRUPT_CAUSE); - - for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) { - irq_set_chip_and_handler(i, &pmu_irq_chip, handle_level_irq); - irq_set_status_flags(i, IRQ_LEVEL); - irq_clear_status_flags(i, IRQ_NOREQUEST); - } - irq_set_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler); } diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index c49042642..b2db791b3 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -49,7 +49,7 @@ static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); static u16 nand_state = SNAPPERCL15_NAND_WPN; u16 set; @@ -76,7 +76,7 @@ static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, static int snappercl15_nand_dev_ready(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY); } diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 61f4b5dc4..45b81a2bc 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -74,7 +74,7 @@ static void __init ts72xx_map_io(void) static void ts72xx_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); if (ctrl & NAND_CTRL_CHANGE) { void __iomem *addr = chip->IO_ADDR_R; @@ -96,7 +96,7 @@ static void ts72xx_nand_hwcontrol(struct mtd_info *mtd, static int ts72xx_nand_device_ready(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); void __iomem *addr = chip->IO_ADDR_R; addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE); diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 3a10f1a83..652a0bb11 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -8,7 +8,8 @@ # Configuration options for the EXYNOS4 menuconfig ARCH_EXYNOS - bool "Samsung EXYNOS" if ARCH_MULTI_V7 + bool "Samsung EXYNOS" + depends on ARCH_MULTI_V7 select ARCH_HAS_BANDGAP select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_REQUIRE_GPIOLIB @@ -27,6 +28,10 @@ menuconfig ARCH_EXYNOS select SRAM select THERMAL select MFD_SYSCON + select CLKSRC_EXYNOS_MCT + select POWER_RESET + select POWER_RESET_SYSCON + select POWER_RESET_SYSCON_POWEROFF help Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 153492513..e349a0389 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -149,7 +149,7 @@ static inline void exynos_pm_init(void) {} extern void exynos_cpu_resume(void); extern void exynos_cpu_resume_ns(void); -extern struct smp_operations exynos_smp_ops; +extern const struct smp_operations exynos_smp_ops; extern void exynos_cpu_power_down(int cpu); extern void exynos_cpu_power_up(int cpu); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 98a2c0cbb..5bd955978 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -479,7 +479,7 @@ static void exynos_cpu_die(unsigned int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -struct smp_operations exynos_smp_ops __initdata = { +const struct smp_operations exynos_smp_ops __initconst = { .smp_init_cpus = exynos_smp_init_cpus, .smp_prepare_cpus = exynos_smp_prepare_cpus, .smp_secondary_init = exynos_secondary_init, diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index c21e41dad..dbf9fe98d 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -14,9 +14,8 @@ #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/delay.h> -#include <linux/notifier.h> -#include <linux/reboot.h> +#include <asm/cputype.h> #include "exynos-pmu.h" #include "regs-pmu.h" @@ -681,23 +680,6 @@ static unsigned int const exynos5420_list_disable_pmu_reg[] = { EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, }; -static void exynos_power_off(void) -{ - unsigned int tmp; - - pr_info("Power down.\n"); - tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL); - tmp ^= (1 << 8); - pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL); - - /* Wait a little so we don't give a false warning below */ - mdelay(100); - - pr_err("Power down failed, please power off system manually.\n"); - while (1) - ; -} - static void exynos5420_powerdown_conf(enum sys_powerdown mode) { u32 this_cluster; @@ -879,14 +861,6 @@ static void exynos5420_pmu_init(void) pr_info("EXYNOS5420 PMU initialized\n"); } -static int pmu_restart_notify(struct notifier_block *this, - unsigned long code, void *unused) -{ - pmu_raw_writel(0x1, EXYNOS_SWRESET); - - return NOTIFY_DONE; -} - static const struct exynos_pmu_data exynos3250_pmu_data = { .pmu_config = exynos3250_pmu_config, .pmu_init = exynos3250_pmu_init, @@ -912,7 +886,7 @@ static const struct exynos_pmu_data exynos5250_pmu_data = { .powerdown_conf = exynos5_powerdown_conf, }; -static struct exynos_pmu_data exynos5420_pmu_data = { +static const struct exynos_pmu_data exynos5420_pmu_data = { .pmu_config = exynos5420_pmu_config, .pmu_init = exynos5420_pmu_init, .powerdown_conf = exynos5420_powerdown_conf, @@ -944,20 +918,11 @@ static const struct of_device_id exynos_pmu_of_device_ids[] = { { /*sentinel*/ }, }; -/* - * Exynos PMU restart notifier, handles restart functionality - */ -static struct notifier_block pmu_restart_handler = { - .notifier_call = pmu_restart_notify, - .priority = 128, -}; - static int exynos_pmu_probe(struct platform_device *pdev) { const struct of_device_id *match; struct device *dev = &pdev->dev; struct resource *res; - int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pmu_base_addr = devm_ioremap_resource(dev, res); @@ -982,12 +947,6 @@ static int exynos_pmu_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pmu_context); - ret = register_restart_handler(&pmu_restart_handler); - if (ret) - dev_warn(dev, "can't register restart handler err=%d\n", ret); - - pm_power_off = exynos_power_off; - dev_dbg(dev, "Exynos PMU Driver probe done\n"); return 0; } diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index fba9068ed..5e4f4c23b 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -484,15 +484,6 @@ #define EXYNOS5420_SWRESET_KFC_SEL 0x3 -#include <asm/cputype.h> -#define MAX_CPUS_IN_CLUSTER 4 - -static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr) -{ - return ((MPIDR_AFFINITY_LEVEL(mpidr, 1) * MAX_CPUS_IN_CLUSTER) - + MPIDR_AFFINITY_LEVEL(mpidr, 0)); -} - /* Only for EXYNOS5420 */ #define EXYNOS5420_ISP_ARM_OPTION 0x2488 #define EXYNOS5420_L2RSTDISABLE_VALUE BIT(3) diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 31aa866c3..81110ec34 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,5 +1,6 @@ config ARCH_HIGHBANK - bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 + bool "Calxeda ECX-1000/2000 (Highbank/Midway)" + depends on ARCH_MULTI_V7 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SUPPORTS_BIG_ENDIAN diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 83061ad0e..a3b091a4d 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -13,7 +13,8 @@ if ARCH_HISI menu "Hisilicon platform type" config ARCH_HI3xxx - bool "Hisilicon Hi36xx family" if ARCH_MULTI_V7 + bool "Hisilicon Hi36xx family" + depends on ARCH_MULTI_V7 select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP @@ -23,7 +24,8 @@ config ARCH_HI3xxx Support for Hisilicon Hi36xx SoC family config ARCH_HIP01 - bool "Hisilicon HIP01 family" if ARCH_MULTI_V7 + bool "Hisilicon HIP01 family" + depends on ARCH_MULTI_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ARM_GLOBAL_TIMER @@ -31,7 +33,8 @@ config ARCH_HIP01 Support for Hisilicon HIP01 SoC family config ARCH_HIP04 - bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7 + bool "Hisilicon HiP04 Cortex A15 family" + depends on ARCH_MULTI_V7 select ARM_ERRATA_798181 if SMP select HAVE_ARM_ARCH_TIMER select MCPM if SMP @@ -40,7 +43,8 @@ config ARCH_HIP04 Support for Hisilicon HiP04 SoC family config ARCH_HIX5HD2 - bool "Hisilicon X5HD2 family" if ARCH_MULTI_V7 + bool "Hisilicon X5HD2 family" + depends on ARCH_MULTI_V7 select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h index c7648ef18..e883583a2 100644 --- a/arch/arm/mach-hisi/core.h +++ b/arch/arm/mach-hisi/core.h @@ -6,17 +6,14 @@ extern void hi3xxx_set_cpu_jump(int cpu, void *jump_addr); extern int hi3xxx_get_cpu_jump(int cpu); extern void secondary_startup(void); -extern struct smp_operations hi3xxx_smp_ops; extern void hi3xxx_cpu_die(unsigned int cpu); extern int hi3xxx_cpu_kill(unsigned int cpu); extern void hi3xxx_set_cpu(int cpu, bool enable); -extern struct smp_operations hix5hd2_smp_ops; extern void hix5hd2_set_cpu(int cpu, bool enable); extern void hix5hd2_cpu_die(unsigned int cpu); -extern struct smp_operations hip01_smp_ops; extern void hip01_set_cpu(int cpu, bool enable); extern void hip01_cpu_die(unsigned int cpu); #endif diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c index b5f8f5ffd..4b653a8cb 100644 --- a/arch/arm/mach-hisi/platmcpm.c +++ b/arch/arm/mach-hisi/platmcpm.c @@ -239,7 +239,7 @@ err: } #endif -static struct smp_operations __initdata hip04_smp_ops = { +static const struct smp_operations hip04_smp_ops __initconst = { .smp_boot_secondary = hip04_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = hip04_cpu_die, diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index 51744127d..47ed32cf5 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -89,7 +89,7 @@ static int hi3xxx_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } -struct smp_operations hi3xxx_smp_ops __initdata = { +static const struct smp_operations hi3xxx_smp_ops __initconst = { .smp_prepare_cpus = hi3xxx_smp_prepare_cpus, .smp_boot_secondary = hi3xxx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU @@ -126,7 +126,7 @@ static int hix5hd2_boot_secondary(unsigned int cpu, struct task_struct *idle) } -struct smp_operations hix5hd2_smp_ops __initdata = { +static const struct smp_operations hix5hd2_smp_ops __initconst = { .smp_prepare_cpus = hisi_common_smp_prepare_cpus, .smp_boot_secondary = hix5hd2_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU @@ -176,7 +176,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } -struct smp_operations hip01_smp_ops __initdata = { +static const struct smp_operations hip01_smp_ops __initconst = { .smp_prepare_cpus = hisi_common_smp_prepare_cpus, .smp_boot_secondary = hip01_boot_secondary, }; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 8ceda2844..15df34fbd 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_MXC - bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M + bool "Freescale i.MX family" + depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM select CLKSRC_IMX_GPT @@ -562,6 +563,7 @@ config SOC_IMX7D select ARM_GIC select HAVE_IMX_ANATOP select HAVE_IMX_MMDC + select HAVE_IMX_SRC help This enables support for Freescale i.MX7 Dual processor. @@ -596,7 +598,8 @@ choice default VF_USE_ARM_GLOBAL_TIMER config VF_USE_ARM_GLOBAL_TIMER - bool "Use ARM Global Timer" if ARCH_MULTI_V7 + bool "Use ARM Global Timer" + depends on ARCH_MULTI_V7 select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK help diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index e2d53839f..32b83f09d 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -153,7 +153,7 @@ void imx_init_l2cache(void); static inline void imx_init_l2cache(void) {} #endif -extern struct smp_operations imx_smp_ops; -extern struct smp_operations ls1021a_smp_ops; +extern const struct smp_operations imx_smp_ops; +extern const struct smp_operations ls1021a_smp_ops; #endif diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 67f7fb130..09cebd8ce 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -177,7 +177,7 @@ struct platform_device *__init imx_add_imx_uart_1irq( const struct imxuart_platform_data *pdata); #include <linux/platform_data/video-mx3fb.h> -#include <linux/platform_data/camera-mx3.h> +#include <linux/platform_data/media/camera-mx3.h> struct imx_ipu_core_data { resource_size_t iobase; resource_size_t synirq; @@ -192,7 +192,7 @@ struct platform_device *__init imx_add_mx3_sdc_fb( const struct imx_ipu_core_data *data, struct mx3fb_platform_data *pdata); -#include <linux/platform_data/camera-mx2.h> +#include <linux/platform_data/media/camera-mx2.h> struct imx_mx2_camera_data { const char *devid; resource_size_t iobasecsi; diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index 6dd22cabf..0b5ba4bf5 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -100,7 +100,7 @@ int mxc_iomux_alloc_pin(unsigned int pin, const char *label) unsigned pad = pin & IOMUX_PADNUM_MASK; if (pad >= (PIN_MAX + 1)) { - printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", + printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n", pad, label ? label : "?"); return -EINVAL; } diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index acaf7056e..a38b16b69 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -84,7 +84,7 @@ static void __init imx6ul_init_late(void) platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); } -static const char *imx6ul_dt_compat[] __initconst = { +static const char * const imx6ul_dt_compat[] __initconst = { "fsl,imx6ul", NULL, }; diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index b450f525a..5a27f20c9 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -105,6 +105,11 @@ static void __init imx7d_init_irq(void) irqchip_init(); } +static void __init imx7d_init_late(void) +{ + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); +} + static const char *const imx7d_dt_compat[] __initconst = { "fsl,imx7d", NULL, @@ -112,6 +117,7 @@ static const char *const imx7d_dt_compat[] __initconst = { DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)") .init_irq = imx7d_init_irq, + .init_late = imx7d_init_late, .init_machine = imx7d_init_machine, .dt_compat = imx7d_dt_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 703ce31d7..9986f9a69 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -17,7 +17,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> -#include <linux/basic_mmio_gpio.h> +#include <linux/gpio/driver.h> #include <linux/gpio.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index a213e7b9c..5c2764604 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -131,7 +131,7 @@ static void qong_init_nor_mtd(void) */ static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); if (cmd == NAND_CMD_NONE) return; diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 7f270015f..711dbbd5b 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -88,7 +88,7 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus) sync_cache_w(&g_diag_reg); } -struct smp_operations imx_smp_ops __initdata = { +const struct smp_operations imx_smp_ops __initconst = { .smp_init_cpus = imx_smp_init_cpus, .smp_prepare_cpus = imx_smp_prepare_cpus, .smp_boot_secondary = imx_boot_secondary, @@ -123,7 +123,7 @@ static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus) iounmap(dcfg_base); } -struct smp_operations ls1021a_smp_ops __initdata = { +const struct smp_operations ls1021a_smp_ops __initconst = { .smp_prepare_cpus = ls1021a_smp_prepare_cpus, .smp_boot_secondary = ls1021a_boot_secondary, }; diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 02d083489..b01bdc9ba 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -1,5 +1,6 @@ -config ARCH_INTEGRATOR - bool "ARM Ltd. Integrator family" if (ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6) +menuconfig ARCH_INTEGRATOR + bool "ARM Ltd. Integrator family" + depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 select ARM_AMBA select ARM_PATCH_PHYS_VIRT if MMU select AUTO_ZRELADDR @@ -23,8 +24,6 @@ config ARCH_INTEGRATOR if ARCH_INTEGRATOR -menu "Integrator Options" - config ARCH_INTEGRATOR_AP bool "Support Integrator/AP and Integrator/PP2 platforms" select CLKSRC_MMIO @@ -36,19 +35,6 @@ config ARCH_INTEGRATOR_AP Include support for the ARM(R) Integrator/AP and Integrator/PP2 platforms. -config ARCH_INTEGRATOR_CP - bool "Support Integrator/CP platform" - select ARCH_CINTEGRATOR - select ARM_TIMER_SP804 - select SERIAL_AMBA_PL011 if TTY - select SERIAL_AMBA_PL011_CONSOLE if TTY - select SOC_BUS - help - Include support for the ARM(R) Integrator CP platform. - -config ARCH_CINTEGRATOR - bool - config INTEGRATOR_IMPD1 bool "Include support for Integrator/IM-PD1" depends on ARCH_INTEGRATOR_AP @@ -63,6 +49,119 @@ config INTEGRATOR_IMPD1 To compile this driver as a module, choose M here: the module will be called impd1. -endmenu +config INTEGRATOR_CM7TDMI + bool "Integrator/CM7TDMI core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4 && !MMU + select CPU_ARM7TDMI + +config INTEGRATOR_CM720T + bool "Integrator/CM720T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T + select CPU_ARM720T + +config INTEGRATOR_CM740T + bool "Integrator/CM740T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T && !MMU + select CPU_ARM740T + +config INTEGRATOR_CM920T + bool "Integrator/CM920T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T + select CPU_ARM920T + +config INTEGRATOR_CM922T_XA10 + bool "Integrator/CM922T-XA10 core module" + depends on ARCH_MULTI_V4T + depends on ARCH_INTEGRATOR_AP + select CPU_ARM922T + +config INTEGRATOR_CM926EJS + bool "Integrator/CM926EJ-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM926T + +config INTEGRATOR_CM940T + bool "Integrator/CM940T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T && !MMU + select CPU_ARM940T + +config INTEGRATOR_CM946ES + bool "Integrator/CM946E-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 && !MMU + select CPU_ARM946E + +config INTEGRATOR_CM966ES + bool "Integrator/CM966E-S core module" + depends on ARCH_INTEGRATOR_AP + depends on BROKEN # no kernel support + +config INTEGRATOR_CM10200E_REV0 + bool "Integrator/CM10200E rev.0 core module" + depends on ARCH_INTEGRATOR_AP && n + depends on ARCH_MULTI_V5 + select CPU_ARM1020 + +config INTEGRATOR_CM10200E + bool "Integrator/CM10200E core module" + depends on ARCH_INTEGRATOR_AP && n + depends on ARCH_MULTI_V5 + select CPU_ARM1020E + +config INTEGRATOR_CM10220E + bool "Integrator/CM10220E core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM1022 + +config INTEGRATOR_CM1026EJS + bool "Integrator/CM1026EJ-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM1026 + +config INTEGRATOR_CM1136JFS + bool "Integrator/CM1136JF-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V6 + select CPU_V6 + +config ARCH_INTEGRATOR_CP + bool "Support Integrator/CP platform" + depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6) + select ARM_TIMER_SP804 + select SERIAL_AMBA_PL011 if TTY + select SERIAL_AMBA_PL011_CONSOLE if TTY + select SOC_BUS + help + Include support for the ARM(R) Integrator CP platform. + +config INTEGRATOR_CT7T + bool "Integrator/CT7TD (ARM7TDMI) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V4T && !MMU + select CPU_ARM7TDMI + +config INTEGRATOR_CT926 + bool "Integrator/CT926 (ARM926EJ-S) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V5 + select CPU_ARM926T + +config INTEGRATOR_CTB36 + bool "Integrator/CTB36 (ARM1136JF-S) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V6 + select CPU_V6 + +config ARCH_CINTEGRATOR + depends on ARCH_INTEGRATOR_CP + def_bool y endif diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h deleted file mode 100644 index 59f42b535..000000000 --- a/arch/arm/mach-iop13xx/include/mach/pci.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _IOP13XX_PCI_H_ -#define _IOP13XX_PCI_H_ -#include <linux/io.h> -#include <mach/irqs.h> - -struct pci_sys_data; -struct hw_pci; -int iop13xx_pci_setup(int nr, struct pci_sys_data *sys); -struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *); -void iop13xx_atu_select(struct hw_pci *plat_pci); -void iop13xx_pci_init(void); -void iop13xx_map_pci_memory(void); - -#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY | \ - PCI_STATUS_SIG_TARGET_ABORT | \ - PCI_STATUS_REC_TARGET_ABORT | \ - PCI_STATUS_REC_TARGET_ABORT | \ - PCI_STATUS_REC_MASTER_ABORT | \ - PCI_STATUS_SIG_SYSTEM_ERROR | \ - PCI_STATUS_DETECTED_PARITY) - -#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR | \ - IOP13XX_ATUE_STAT_ROOT_SYS_ERR | \ - IOP13XX_ATUE_STAT_PCI_IFACE_ERR | \ - IOP13XX_ATUE_STAT_ERR_COR | \ - IOP13XX_ATUE_STAT_ERR_UNCOR | \ - IOP13XX_ATUE_STAT_CRS | \ - IOP13XX_ATUE_STAT_DET_PAR_ERR | \ - IOP13XX_ATUE_STAT_EXT_REC_MABORT | \ - IOP13XX_ATUE_STAT_SIG_TABORT | \ - IOP13XX_ATUE_STAT_EXT_REC_TABORT | \ - IOP13XX_ATUE_STAT_MASTER_DATA_PAR) - -#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM | \ - IOP13XX_ATUX_STAT_REC_SCEM | \ - IOP13XX_ATUX_STAT_TX_SERR | \ - IOP13XX_ATUX_STAT_DET_PAR_ERR | \ - IOP13XX_ATUX_STAT_INT_REC_MABORT | \ - IOP13XX_ATUX_STAT_REC_SERR | \ - IOP13XX_ATUX_STAT_EXT_REC_MABORT | \ - IOP13XX_ATUX_STAT_EXT_REC_TABORT | \ - IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \ - IOP13XX_ATUX_STAT_MASTER_DATA_PAR) - -/* PCI interrupts - */ -#define ATUX_INTA IRQ_IOP13XX_XINT0 -#define ATUX_INTB IRQ_IOP13XX_XINT1 -#define ATUX_INTC IRQ_IOP13XX_XINT2 -#define ATUX_INTD IRQ_IOP13XX_XINT3 - -#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA -#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB -#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC -#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD - -#endif /* _IOP13XX_PCI_H_ */ diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 9cd07d396..d255ab5ad 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -23,7 +23,7 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pci.h> +#include "pci.h" #include <asm/mach/time.h> #include <mach/time.h> diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index b3ec11cb7..33eeaf1fa 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -23,7 +23,7 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pci.h> +#include "pci.h" #include <asm/mach/time.h> #include <mach/time.h> diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c index 623d85a4a..c702cc409 100644 --- a/arch/arm/mach-iop13xx/irq.c +++ b/arch/arm/mach-iop13xx/irq.c @@ -25,7 +25,7 @@ #include <asm/irq.h> #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/msi.h> +#include "msi.h" /* INTCTL0 CP6 R0 Page 4 */ diff --git a/arch/arm/mach-iop13xx/include/mach/msi.h b/arch/arm/mach-iop13xx/msi.h index b80c5ae17..b80c5ae17 100644 --- a/arch/arm/mach-iop13xx/include/mach/msi.h +++ b/arch/arm/mach-iop13xx/msi.h diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 9082b84ae..204eb4460 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -27,7 +27,7 @@ #include <asm/sizes.h> #include <asm/signal.h> #include <asm/mach/pci.h> -#include <mach/pci.h> +#include "pci.h" #define IOP13XX_PCI_DEBUG 0 #define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x))) diff --git a/arch/arm/mach-iop13xx/pci.h b/arch/arm/mach-iop13xx/pci.h index d45a80b30..71b9c57e1 100644 --- a/arch/arm/mach-iop13xx/pci.h +++ b/arch/arm/mach-iop13xx/pci.h @@ -1,6 +1,64 @@ +#ifndef _IOP13XX_PCI_H_ +#define _IOP13XX_PCI_H_ +#include <linux/io.h> +#include <mach/irqs.h> + #include <linux/types.h> extern void __iomem *iop13xx_atue_mem_base; extern void __iomem *iop13xx_atux_mem_base; extern size_t iop13xx_atue_mem_size; extern size_t iop13xx_atux_mem_size; + +struct pci_sys_data; +struct hw_pci; +int iop13xx_pci_setup(int nr, struct pci_sys_data *sys); +struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *); +void iop13xx_atu_select(struct hw_pci *plat_pci); +void iop13xx_pci_init(void); +void iop13xx_map_pci_memory(void); + +#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY | \ + PCI_STATUS_SIG_TARGET_ABORT | \ + PCI_STATUS_REC_TARGET_ABORT | \ + PCI_STATUS_REC_TARGET_ABORT | \ + PCI_STATUS_REC_MASTER_ABORT | \ + PCI_STATUS_SIG_SYSTEM_ERROR | \ + PCI_STATUS_DETECTED_PARITY) + +#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR | \ + IOP13XX_ATUE_STAT_ROOT_SYS_ERR | \ + IOP13XX_ATUE_STAT_PCI_IFACE_ERR | \ + IOP13XX_ATUE_STAT_ERR_COR | \ + IOP13XX_ATUE_STAT_ERR_UNCOR | \ + IOP13XX_ATUE_STAT_CRS | \ + IOP13XX_ATUE_STAT_DET_PAR_ERR | \ + IOP13XX_ATUE_STAT_EXT_REC_MABORT | \ + IOP13XX_ATUE_STAT_SIG_TABORT | \ + IOP13XX_ATUE_STAT_EXT_REC_TABORT | \ + IOP13XX_ATUE_STAT_MASTER_DATA_PAR) + +#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM | \ + IOP13XX_ATUX_STAT_REC_SCEM | \ + IOP13XX_ATUX_STAT_TX_SERR | \ + IOP13XX_ATUX_STAT_DET_PAR_ERR | \ + IOP13XX_ATUX_STAT_INT_REC_MABORT | \ + IOP13XX_ATUX_STAT_REC_SERR | \ + IOP13XX_ATUX_STAT_EXT_REC_MABORT | \ + IOP13XX_ATUX_STAT_EXT_REC_TABORT | \ + IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \ + IOP13XX_ATUX_STAT_MASTER_DATA_PAR) + +/* PCI interrupts + */ +#define ATUX_INTA IRQ_IOP13XX_XINT0 +#define ATUX_INTB IRQ_IOP13XX_XINT1 +#define ATUX_INTC IRQ_IOP13XX_XINT2 +#define ATUX_INTD IRQ_IOP13XX_XINT3 + +#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA +#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB +#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC +#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD + +#endif /* _IOP13XX_PCI_H_ */ diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index e7b8befa8..508c2d778 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -76,8 +76,8 @@ static struct mtd_partition ixdp425_partitions[] = { static void ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *this = mtd->priv; - int offset = (int)this->priv; + struct nand_chip *this = mtd_to_nand(mtd); + int offset = (int)nand_get_controller_data(this); if (ctrl & NAND_CTRL_CHANGE) { if (ctrl & NAND_NCE) { @@ -88,7 +88,7 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0; offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0; - this->priv = (void *)offset; + nand_set_controller_data(this, (void *)offset); } if (cmd != NAND_CMD_NONE) diff --git a/arch/arm/mach-keystone/keystone.h b/arch/arm/mach-keystone/keystone.h index cd04a1c14..33eaa037a 100644 --- a/arch/arm/mach-keystone/keystone.h +++ b/arch/arm/mach-keystone/keystone.h @@ -15,7 +15,7 @@ #ifndef __ASSEMBLER__ -extern struct smp_operations keystone_smp_ops; +extern const struct smp_operations keystone_smp_ops; extern void secondary_startup(void); extern u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr); extern int keystone_pm_runtime_init(void); diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c index 4bbb18463..566527697 100644 --- a/arch/arm/mach-keystone/platsmp.c +++ b/arch/arm/mach-keystone/platsmp.c @@ -39,6 +39,6 @@ static int keystone_smp_boot_secondary(unsigned int cpu, return error; } -struct smp_operations keystone_smp_ops __initdata = { +const struct smp_operations keystone_smp_ops __initconst = { .smp_boot_secondary = keystone_smp_boot_secondary, }; diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index 9f9c0441a..e4d709c8e 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -33,7 +33,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/devices.h> +#include "devices.h" #include <mach/gpio-ks8695.h> #include "generic.h" diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index d37c218c3..13537e9c5 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -28,7 +28,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/devices.h> +#include "devices.h" #include <mach/gpio-ks8695.h> #include "generic.h" diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index 3acbdfd31..69cfb9935 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -19,7 +19,7 @@ #include <asm/mach/irq.h> #include <mach/gpio-ks8695.h> -#include <mach/devices.h> +#include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c index f2658168e..1f4f2f4f2 100644 --- a/arch/arm/mach-ks8695/board-og.c +++ b/arch/arm/mach-ks8695/board-og.c @@ -18,7 +18,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/devices.h> +#include "devices.h" #include <mach/regs-gpio.h> #include <mach/gpio-ks8695.h> #include "generic.h" diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c index fdf2352d2..46e455c38 100644 --- a/arch/arm/mach-ks8695/board-sg.c +++ b/arch/arm/mach-ks8695/board-sg.c @@ -16,7 +16,7 @@ #include <linux/mtd/partitions.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/devices.h> +#include "devices.h" #include "generic.h" /* diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c index ddb242229..474a050da 100644 --- a/arch/arm/mach-ks8695/cpu.c +++ b/arch/arm/mach-ks8695/cpu.c @@ -30,7 +30,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-sys.h> +#include "regs-sys.h" #include <mach/regs-misc.h> diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c index 47399bc3c..61cf20beb 100644 --- a/arch/arm/mach-ks8695/devices.c +++ b/arch/arm/mach-ks8695/devices.c @@ -24,9 +24,9 @@ #include <linux/platform_device.h> #include <mach/irqs.h> -#include <mach/regs-wan.h> -#include <mach/regs-lan.h> -#include <mach/regs-hpna.h> +#include "regs-wan.h" +#include "regs-lan.h" +#include "regs-hpna.h" #include <mach/regs-switch.h> #include <mach/regs-misc.h> diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/devices.h index 1e6594a0f..1e6594a0f 100644 --- a/arch/arm/mach-ks8695/include/mach/devices.h +++ b/arch/arm/mach-ks8695/devices.h diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index c1bc4c371..577a35f75 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -33,8 +33,8 @@ #include <asm/mach/pci.h> #include <mach/hardware.h> -#include <mach/devices.h> -#include <mach/regs-pci.h> +#include "devices.h" +#include "regs-pci.h" static int pci_dbg; diff --git a/arch/arm/mach-ks8695/include/mach/regs-hpna.h b/arch/arm/mach-ks8695/regs-hpna.h index 815ce5c2e..815ce5c2e 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-hpna.h +++ b/arch/arm/mach-ks8695/regs-hpna.h diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/regs-lan.h index 82c5f3791..82c5f3791 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-lan.h +++ b/arch/arm/mach-ks8695/regs-lan.h diff --git a/arch/arm/mach-ks8695/include/mach/regs-mem.h b/arch/arm/mach-ks8695/regs-mem.h index 55806bc68..55806bc68 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-mem.h +++ b/arch/arm/mach-ks8695/regs-mem.h diff --git a/arch/arm/mach-ks8695/include/mach/regs-pci.h b/arch/arm/mach-ks8695/regs-pci.h index 75a9db6ed..75a9db6ed 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-pci.h +++ b/arch/arm/mach-ks8695/regs-pci.h diff --git a/arch/arm/mach-ks8695/include/mach/regs-sys.h b/arch/arm/mach-ks8695/regs-sys.h index 57c20be0c..57c20be0c 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-sys.h +++ b/arch/arm/mach-ks8695/regs-sys.h diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/regs-wan.h index c475bed22..c475bed22 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-wan.h +++ b/arch/arm/mach-ks8695/regs-wan.h diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index aeece17e5..0abcc51af 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_MEDIATEK - bool "Mediatek MT65xx & MT81xx SoC" if ARCH_MULTI_V7 + bool "Mediatek MT65xx & MT81xx SoC" + depends on ARCH_MULTI_V7 select ARM_GIC select PINCTRL select MTK_TIMER diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index d019a080a..2f9f09ac5 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -44,6 +44,7 @@ static void __init mediatek_timer_init(void) }; static const char * const mediatek_board_dt_compat[] = { + "mediatek,mt2701", "mediatek,mt6589", "mediatek,mt6592", "mediatek,mt8127", diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c index 8141f3f8a..a1b07eeaa 100644 --- a/arch/arm/mach-mediatek/platsmp.c +++ b/arch/arm/mach-mediatek/platsmp.c @@ -128,13 +128,13 @@ static void __init mtk_smp_prepare_cpus(unsigned int max_cpus) __mtk_smp_prepare_cpus(max_cpus, 0); } -static struct smp_operations mt81xx_tz_smp_ops __initdata = { +static const struct smp_operations mt81xx_tz_smp_ops __initconst = { .smp_prepare_cpus = mtk_tz_smp_prepare_cpus, .smp_boot_secondary = mtk_boot_secondary, }; CPU_METHOD_OF_DECLARE(mt81xx_tz_smp, "mediatek,mt81xx-tz-smp", &mt81xx_tz_smp_ops); -static struct smp_operations mt6589_smp_ops __initdata = { +static const struct smp_operations mt6589_smp_ops __initconst = { .smp_prepare_cpus = mtk_smp_prepare_cpus, .smp_boot_secondary = mtk_boot_secondary, }; diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 5d56f86ae..31bdd9109 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_MESON - bool "Amlogic Meson SoCs" if ARCH_MULTI_V7 + bool "Amlogic Meson SoCs" + depends on ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select GENERIC_IRQ_CHIP select ARM_GIC diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index fdbfadf00..01c57d369 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -1,9 +1,22 @@ +menuconfig ARCH_MMP + bool "Marvell PXA168/910/MMP2" + depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB + select GPIO_PXA + select PINCTRL + select PLAT_PXA + help + Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. + if ARCH_MMP -menu "Marvell PXA168/910/MMP2 Implmentations" +menu "Marvell PXA168/910/MMP2 Implementations" + +if ATAGS config MACH_ASPENITE bool "Marvell's PXA168 Aspenite Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -11,6 +24,7 @@ config MACH_ASPENITE config MACH_ZYLONITE2 bool "Marvell's PXA168 Zylonite2 Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -18,6 +32,7 @@ config MACH_ZYLONITE2 config MACH_AVENGERS_LITE bool "Marvell's PXA168 Avengers Lite Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -25,6 +40,7 @@ config MACH_AVENGERS_LITE config MACH_TAVOREVB bool "Marvell's PXA910 TavorEVB Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA910 help Say 'Y' here if you want to support the Marvell PXA910-based @@ -32,6 +48,7 @@ config MACH_TAVOREVB config MACH_TTC_DKB bool "Marvell's PXA910 TavorEVB Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA910 help Say 'Y' here if you want to support the Marvell PXA910-based @@ -39,7 +56,7 @@ config MACH_TTC_DKB config MACH_BROWNSTONE bool "Marvell's Brownstone Development Platform" - depends on !CPU_MOHAWK + depends on ARCH_MULTI_V7 select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-based @@ -50,7 +67,7 @@ config MACH_BROWNSTONE config MACH_FLINT bool "Marvell's Flint Development Platform" - depends on !CPU_MOHAWK + depends on ARCH_MULTI_V7 select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-based @@ -61,7 +78,7 @@ config MACH_FLINT config MACH_MARVELL_JASPER bool "Marvell's Jasper Development Platform" - depends on !CPU_MOHAWK + depends on ARCH_MULTI_V7 select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-base @@ -72,6 +89,7 @@ config MACH_MARVELL_JASPER config MACH_TETON_BGA bool "Marvell's PXA168 Teton BGA Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -79,14 +97,16 @@ config MACH_TETON_BGA config MACH_GPLUGD bool "Marvell's PXA168 GuruPlug Display (gplugD) Board" + depends on ARCH_MULTI_V5 select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based GuruPlug Display (gplugD) Board +endif config MACH_MMP_DT bool "Support MMP (ARMv5) platforms from device tree" - select USE_OF + depends on ARCH_MULTI_V5 select PINCTRL select PINCTRL_SINGLE select COMMON_CLK @@ -99,11 +119,9 @@ config MACH_MMP_DT config MACH_MMP2_DT bool "Support MMP2 (ARMv7) platforms from device tree" - depends on !CPU_MOHAWK - select USE_OF + depends on ARCH_MULTI_V7 select PINCTRL select PINCTRL_SINGLE - select COMMON_CLK select ARCH_HAS_RESET_CONTROLLER select CPU_PJ4 help diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 98f0f6388..7677ad541 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -1,6 +1,7 @@ # # Makefile for Marvell's PXA168 processors line # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-pxa/include obj-y += common.o devices.o time.o diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/addr-map.h index f88a44c0e..2739d27bc 100644 --- a/arch/arm/mach-mmp/include/mach/addr-map.h +++ b/arch/arm/mach-mmp/addr-map.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-mmp/include/mach/addr-map.h - * * Common address map definitions * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 7e0248582..5db0edf71 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -22,14 +22,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/addr-map.h> -#include <mach/mfp-pxa168.h> -#include <mach/pxa168.h> -#include <mach/irqs.h> #include <video/pxa168fb.h> #include <linux/input.h> #include <linux/platform_data/keypad-pxa27x.h> +#include "addr-map.h" +#include "mfp-pxa168.h" +#include "pxa168.h" +#include "irqs.h" #include "common.h" static unsigned long common_pin_config[] __initdata = { diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index a451a0f4d..3d2aea830 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -17,10 +17,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/addr-map.h> -#include <mach/mfp-pxa168.h> -#include <mach/pxa168.h> -#include <mach/irqs.h> +#include "addr-map.h" +#include "mfp-pxa168.h" +#include "pxa168.h" +#include "irqs.h" #include "common.h" diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index ac25544b8..d1613b954 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -22,10 +22,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/addr-map.h> -#include <mach/mfp-mmp2.h> -#include <mach/mmp2.h> -#include <mach/irqs.h> +#include "addr-map.h" +#include "mfp-mmp2.h" +#include "mmp2.h" +#include "irqs.h" #include "common.h" diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c index 53d77cbd6..835c3e7cc 100644 --- a/arch/arm/mach-mmp/clock-mmp2.c +++ b/arch/arm/mach-mmp/clock-mmp2.c @@ -4,8 +4,9 @@ #include <linux/list.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/clk/mmp.h> -#include <mach/addr-map.h> +#include "addr-map.h" #include "common.h" #include "clock.h" @@ -105,7 +106,8 @@ static struct clk_lookup mmp2_clkregs[] = { INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"), }; -void __init mmp2_clk_init(void) +void __init mmp2_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys, + phys_addr_t apbc_phys) { clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs)); } diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c index c572f219a..f726a3692 100644 --- a/arch/arm/mach-mmp/clock-pxa168.c +++ b/arch/arm/mach-mmp/clock-pxa168.c @@ -4,8 +4,9 @@ #include <linux/list.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/clk/mmp.h> -#include <mach/addr-map.h> +#include "addr-map.h" #include "common.h" #include "clock.h" @@ -85,7 +86,8 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; -void __init pxa168_clk_init(void) +void __init pxa168_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys, + phys_addr_t apbc_phys) { clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs)); } diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c index 379e1df61..bca60a224 100644 --- a/arch/arm/mach-mmp/clock-pxa910.c +++ b/arch/arm/mach-mmp/clock-pxa910.c @@ -4,8 +4,9 @@ #include <linux/list.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/clk/mmp.h> -#include <mach/addr-map.h> +#include "addr-map.h" #include "common.h" #include "clock.h" @@ -61,7 +62,8 @@ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; -void __init pxa910_clk_init(void) +void __init pxa910_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys, + phys_addr_t apbc_phys, phys_addr_t apbcp_phys) { clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs)); } diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c index 7c6f95f29..ac6633d0b 100644 --- a/arch/arm/mach-mmp/clock.c +++ b/arch/arm/mach-mmp/clock.c @@ -13,7 +13,7 @@ #include <linux/clk.h> #include <linux/io.h> -#include <mach/regs-apbc.h> +#include "regs-apbc.h" #include "clock.h" static void apbc_clk_enable(struct clk *clk) diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h index 149b30cd1..819444518 100644 --- a/arch/arm/mach-mmp/clock.h +++ b/arch/arm/mach-mmp/clock.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-mmp/clock.h - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index c03b4ab58..685a0993c 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -15,8 +15,8 @@ #include <asm/page.h> #include <asm/mach/map.h> #include <asm/system_misc.h> -#include <mach/addr-map.h> -#include <mach/cputype.h> +#include "addr-map.h" +#include "cputype.h" #include "common.h" diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index cf445bae6..7453a90c3 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -5,6 +5,3 @@ extern void timer_init(int irq); extern void __init mmp_map_io(void); extern void mmp_restart(enum reboot_mode, const char *); -extern void __init pxa168_clk_init(void); -extern void __init pxa910_clk_init(void); -extern void __init mmp2_clk_init(void); diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/cputype.h index 8a3b56dfd..8a3b56dfd 100644 --- a/arch/arm/mach-mmp/include/mach/cputype.h +++ b/arch/arm/mach-mmp/cputype.h diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index 2bcb766af..3330ac7cf 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -12,10 +12,10 @@ #include <linux/delay.h> #include <asm/irq.h> -#include <mach/irqs.h> -#include <mach/devices.h> -#include <mach/cputype.h> -#include <mach/regs-usb.h> +#include "irqs.h" +#include "devices.h" +#include "cputype.h" +#include "regs-usb.h" int __init pxa_register_device(struct pxa_device_desc *desc, void *data, size_t size) @@ -73,6 +73,8 @@ int __init pxa_register_device(struct pxa_device_desc *desc, } #if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET) +#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV) +#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168) /***************************************************************************** * The registers read/write routines @@ -112,9 +114,6 @@ static void u2o_write(void __iomem *base, unsigned int offset, readl_relaxed(base + offset); } -#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV) - -#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168) static DEFINE_MUTEX(phy_lock); static int phy_init_cnt; diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/devices.h index 21217ef11..21217ef11 100644 --- a/arch/arm/mach-mmp/include/mach/devices.h +++ b/arch/arm/mach-mmp/devices.h diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 6291c33d8..078b98034 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -21,10 +21,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/addr-map.h> -#include <mach/mfp-mmp2.h> -#include <mach/mmp2.h> -#include <mach/irqs.h> +#include "addr-map.h" +#include "mfp-mmp2.h" +#include "mmp2.h" +#include "irqs.h" #include "common.h" diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 22762a1f9..c224119dc 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -16,9 +16,9 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/irqs.h> -#include <mach/pxa168.h> -#include <mach/mfp-pxa168.h> +#include "irqs.h" +#include "pxa168.h" +#include "mfp-pxa168.h" #include "common.h" diff --git a/arch/arm/mach-mmp/include/mach/dma.h b/arch/arm/mach-mmp/include/mach/dma.h deleted file mode 100644 index 1d6914544..000000000 --- a/arch/arm/mach-mmp/include/mach/dma.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/dma.h - */ - -#ifndef __ASM_MACH_DMA_H -#define __ASM_MACH_DMA_H - -#include <mach/addr-map.h> - -#define DMAC_REGS_VIRT (APB_VIRT_BASE + 0x00000) - -#include <plat/dma.h> -#endif /* __ASM_MACH_DMA_H */ diff --git a/arch/arm/mach-mmp/include/mach/hardware.h b/arch/arm/mach-mmp/include/mach/hardware.h deleted file mode 100644 index 99264a5ce..000000000 --- a/arch/arm/mach-mmp/include/mach/hardware.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASM_MACH_HARDWARE_H -#define __ASM_MACH_HARDWARE_H - -#endif /* __ASM_MACH_HARDWARE_H */ diff --git a/arch/arm/mach-mmp/include/mach/regs-smc.h b/arch/arm/mach-mmp/include/mach/regs-smc.h deleted file mode 100644 index e484d40d7..000000000 --- a/arch/arm/mach-mmp/include/mach/regs-smc.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/regs-smc.h - * - * Static Memory Controller Registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_REGS_SMC_H -#define __ASM_MACH_REGS_SMC_H - -#include <mach/addr-map.h> - -#define SMC_VIRT_BASE (AXI_VIRT_BASE + 0x83800) -#define SMC_REG(x) (SMC_VIRT_BASE + (x)) - -#define SMC_MSC0 SMC_REG(0x0020) -#define SMC_MSC1 SMC_REG(0x0024) -#define SMC_SXCNFG0 SMC_REG(0x0030) -#define SMC_SXCNFG1 SMC_REG(0x0034) -#define SMC_MEMCLKCFG SMC_REG(0x0068) -#define SMC_CSDFICFG0 SMC_REG(0x0090) -#define SMC_CSDFICFG1 SMC_REG(0x0094) -#define SMC_CLK_RET_DEL SMC_REG(0x00b0) -#define SMC_ADV_RET_DEL SMC_REG(0x00b4) -#define SMC_CSADRMAP0 SMC_REG(0x00c0) -#define SMC_CSADRMAP1 SMC_REG(0x00c4) -#define SMC_WE_AP0 SMC_REG(0x00e0) -#define SMC_WE_AP1 SMC_REG(0x00e4) -#define SMC_OE_AP0 SMC_REG(0x00f0) -#define SMC_OE_AP1 SMC_REG(0x00f4) -#define SMC_ADV_AP0 SMC_REG(0x0100) -#define SMC_ADV_AP1 SMC_REG(0x0104) - -#endif /* __ASM_MACH_REGS_SMC_H */ diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h deleted file mode 100644 index 8890fa8fa..000000000 --- a/arch/arm/mach-mmp/include/mach/uncompress.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * arch/arm/mach-mmp/include/mach/uncompress.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/serial_reg.h> -#include <mach/addr-map.h> -#include <asm/mach-types.h> - -#define UART1_BASE (APB_PHYS_BASE + 0x36000) -#define UART2_BASE (APB_PHYS_BASE + 0x17000) -#define UART3_BASE (APB_PHYS_BASE + 0x18000) - -volatile unsigned long *UART; - -static inline void putc(char c) -{ - /* UART enabled? */ - if (!(UART[UART_IER] & UART_IER_UUE)) - return; - - while (!(UART[UART_LSR] & UART_LSR_THRE)) - barrier(); - - UART[UART_TX] = c; -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -static inline void arch_decomp_setup(void) -{ - /* default to UART2 */ - UART = (unsigned long *)UART2_BASE; - - if (machine_is_avengers_lite()) - UART = (unsigned long *)UART3_BASE; -} diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/irqs.h index fb492a50a..fb492a50a 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/irqs.h diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 0e9e5c05b..5dbb753a7 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -20,12 +20,12 @@ #include <linux/mfd/max8925.h> #include <linux/interrupt.h> -#include <mach/irqs.h> +#include "irqs.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/addr-map.h> -#include <mach/mfp-mmp2.h> -#include <mach/mmp2.h> +#include "addr-map.h" +#include "mfp-mmp2.h" +#include "mmp2.h" #include "common.h" diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/mfp-mmp2.h index 4ad38629c..b27443497 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h +++ b/arch/arm/mach-mmp/mfp-mmp2.h @@ -1,7 +1,7 @@ #ifndef __ASM_MACH_MFP_MMP2_H #define __ASM_MACH_MFP_MMP2_H -#include <mach/mfp.h> +#include "mfp.h" #define MFP_DRIVE_VERY_SLOW (0x0 << 13) #define MFP_DRIVE_SLOW (0x2 << 13) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/mfp-pxa168.h index 92aaa3c19..9050d0323 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/mfp-pxa168.h @@ -1,7 +1,7 @@ #ifndef __ASM_MACH_MFP_PXA168_H #define __ASM_MACH_MFP_PXA168_H -#include <mach/mfp.h> +#include "mfp.h" #define MFP_DRIVE_VERY_SLOW (0x0 << 13) #define MFP_DRIVE_SLOW (0x1 << 13) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/mfp-pxa910.h index 8c78f2b16..f06db5cd3 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/arch/arm/mach-mmp/mfp-pxa910.h @@ -1,7 +1,7 @@ #ifndef __ASM_MACH_MFP_PXA910_H #define __ASM_MACH_MFP_PXA910_H -#include <mach/mfp.h> +#include "mfp.h" #define MFP_DRIVE_VERY_SLOW (0x0 << 13) #define MFP_DRIVE_SLOW (0x2 << 13) diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/mfp.h index 62e510e80..62e510e80 100644 --- a/arch/arm/mach-mmp/include/mach/mfp.h +++ b/arch/arm/mach-mmp/mfp.h diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index a70b5530b..afba5460c 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -9,6 +9,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/clk/mmp.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,15 +21,14 @@ #include <asm/hardware/cache-tauros2.h> #include <asm/mach/time.h> -#include <mach/addr-map.h> -#include <mach/regs-apbc.h> -#include <mach/cputype.h> -#include <mach/irqs.h> -#include <mach/dma.h> -#include <mach/mfp.h> -#include <mach/devices.h> -#include <mach/mmp2.h> -#include <mach/pm-mmp2.h> +#include "addr-map.h" +#include "regs-apbc.h" +#include "cputype.h" +#include "irqs.h" +#include "mfp.h" +#include "devices.h" +#include "mmp2.h" +#include "pm-mmp2.h" #include "common.h" @@ -110,8 +110,9 @@ static int __init mmp2_init(void) #endif mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(mmp2_addr_map); - pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16); - mmp2_clk_init(); + mmp2_clk_init(APB_PHYS_BASE + 0x50000, + AXI_PHYS_BASE + 0x82800, + APB_PHYS_BASE + 0x15000); } return 0; diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/mmp2.h index 0764f4ece..9b5e75ee9 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/mmp2.h @@ -10,9 +10,10 @@ extern void mmp2_clear_pmic_int(void); #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> -#include <mach/devices.h> #include <linux/platform_data/dma-mmp_tdma.h> +#include "devices.h" + extern struct pxa_device_desc mmp2_device_uart1; extern struct pxa_device_desc mmp2_device_uart2; extern struct pxa_device_desc mmp2_device_uart3; diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c index 43b1a5169..17699be3b 100644 --- a/arch/arm/mach-mmp/pm-mmp2.c +++ b/arch/arm/mach-mmp/pm-mmp2.c @@ -18,12 +18,12 @@ #include <linux/io.h> #include <linux/interrupt.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/cputype.h> -#include <mach/addr-map.h> -#include <mach/pm-mmp2.h> -#include <mach/regs-icu.h> -#include <mach/irqs.h> + +#include "cputype.h" +#include "addr-map.h" +#include "pm-mmp2.h" +#include "regs-icu.h" +#include "irqs.h" int mmp2_set_wake(struct irq_data *d, unsigned int on) { diff --git a/arch/arm/mach-mmp/include/mach/pm-mmp2.h b/arch/arm/mach-mmp/pm-mmp2.h index 98bd66ce8..486e0590c 100644 --- a/arch/arm/mach-mmp/include/mach/pm-mmp2.h +++ b/arch/arm/mach-mmp/pm-mmp2.h @@ -11,7 +11,7 @@ #ifndef __MMP2_PM_H__ #define __MMP2_PM_H__ -#include <mach/addr-map.h> +#include "addr-map.h" #define APMU_PJ_IDLE_CFG APMU_REG(0x018) #define APMU_PJ_IDLE_CFG_PJ_IDLE (1 << 1) diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c index 7db5870d1..8b47600b3 100644 --- a/arch/arm/mach-mmp/pm-pxa910.c +++ b/arch/arm/mach-mmp/pm-pxa910.c @@ -19,12 +19,12 @@ #include <linux/irq.h> #include <asm/mach-types.h> #include <asm/outercache.h> -#include <mach/hardware.h> -#include <mach/cputype.h> -#include <mach/addr-map.h> -#include <mach/pm-pxa910.h> -#include <mach/regs-icu.h> -#include <mach/irqs.h> + +#include "cputype.h" +#include "addr-map.h" +#include "pm-pxa910.h" +#include "regs-icu.h" +#include "irqs.h" int pxa910_set_wake(struct irq_data *data, unsigned int on) { diff --git a/arch/arm/mach-mmp/include/mach/pm-pxa910.h b/arch/arm/mach-mmp/pm-pxa910.h index 8cac8ab52..8cac8ab52 100644 --- a/arch/arm/mach-mmp/include/mach/pm-pxa910.h +++ b/arch/arm/mach-mmp/pm-pxa910.h diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 144e99762..0f5f16fb8 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -13,25 +13,25 @@ #include <linux/list.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/clk/mmp.h> #include <linux/platform_device.h> #include <linux/platform_data/mv_usb.h> +#include <linux/dma-mapping.h> #include <asm/mach/time.h> #include <asm/system_misc.h> -#include <mach/cputype.h> -#include <mach/addr-map.h> -#include <mach/regs-apbc.h> -#include <mach/regs-apmu.h> -#include <mach/irqs.h> -#include <mach/dma.h> -#include <mach/devices.h> -#include <mach/mfp.h> -#include <linux/dma-mapping.h> -#include <mach/pxa168.h> -#include <mach/regs-usb.h> -#include "common.h" +#include "addr-map.h" #include "clock.h" +#include "common.h" +#include "cputype.h" +#include "devices.h" +#include "irqs.h" +#include "mfp.h" +#include "pxa168.h" +#include "regs-apbc.h" +#include "regs-apmu.h" +#include "regs-usb.h" #define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) @@ -55,8 +55,9 @@ static int __init pxa168_init(void) if (cpu_is_pxa168()) { mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(pxa168_mfp_addr_map); - pxa_init_dma(IRQ_PXA168_DMA_INT0, 32); - pxa168_clk_init(); + pxa168_clk_init(APB_PHYS_BASE + 0x50000, + AXI_PHYS_BASE + 0x82800, + APB_PHYS_BASE + 0x15000); } return 0; diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/pxa168.h index a83ba7cb5..75841e9cc 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/pxa168.h @@ -11,14 +11,15 @@ extern void pxa168_clear_keypad_wakeup(void); #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> -#include <mach/devices.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> #include <video/pxa168fb.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <mach/cputype.h> #include <linux/pxa168_eth.h> #include <linux/platform_data/mv_usb.h> +#include "devices.h" +#include "cputype.h" + extern struct pxa_device_desc pxa168_device_uart1; extern struct pxa_device_desc pxa168_device_uart2; extern struct pxa_device_desc pxa168_device_uart3; diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index eb57ee196..1ccbba9ac 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/clk/mmp.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -18,15 +19,14 @@ #include <asm/hardware/cache-tauros2.h> #include <asm/mach/time.h> -#include <mach/addr-map.h> -#include <mach/regs-apbc.h> -#include <mach/cputype.h> -#include <mach/irqs.h> -#include <mach/dma.h> -#include <mach/mfp.h> -#include <mach/devices.h> -#include <mach/pm-pxa910.h> -#include <mach/pxa910.h> +#include "addr-map.h" +#include "regs-apbc.h" +#include "cputype.h" +#include "irqs.h" +#include "mfp.h" +#include "devices.h" +#include "pm-pxa910.h" +#include "pxa910.h" #include "common.h" @@ -96,8 +96,10 @@ static int __init pxa910_init(void) #endif mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(pxa910_mfp_addr_map); - pxa_init_dma(IRQ_PXA910_DMA_INT0, 32); - pxa910_clk_init(); + pxa910_clk_init(APB_PHYS_BASE + 0x50000, + AXI_PHYS_BASE + 0x82800, + APB_PHYS_BASE + 0x15000, + APB_PHYS_BASE + 0x3b000); } return 0; diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/pxa910.h index 92253203f..a211e81e5 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/pxa910.h @@ -7,10 +7,11 @@ extern void __init pxa910_init_irq(void); #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> -#include <mach/devices.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> #include <video/mmp_disp.h> +#include "devices.h" + extern struct pxa_device_desc pxa910_device_uart1; extern struct pxa_device_desc pxa910_device_uart2; extern struct pxa_device_desc pxa910_device_twsi0; diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/regs-apbc.h index ddc812f40..704bcae3f 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apbc.h +++ b/arch/arm/mach-mmp/regs-apbc.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h - * * Application Peripheral Bus Clock Unit * * This program is free software; you can redistribute it and/or modify @@ -11,7 +9,7 @@ #ifndef __ASM_MACH_REGS_APBC_H #define __ASM_MACH_REGS_APBC_H -#include <mach/addr-map.h> +#include "addr-map.h" /* Common APB clock register bit definitions */ #define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */ diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/regs-apmu.h index 93c8d0e29..23f6209b6 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apmu.h +++ b/arch/arm/mach-mmp/regs-apmu.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h - * * Application Subsystem Power Management Unit * * This program is free software; you can redistribute it and/or modify @@ -11,7 +9,7 @@ #ifndef __ASM_MACH_REGS_APMU_H #define __ASM_MACH_REGS_APMU_H -#include <mach/addr-map.h> +#include "addr-map.h" #define APMU_FNCLK_EN (1 << 4) #define APMU_AXICLK_EN (1 << 3) diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/regs-icu.h index f882d9189..0328abe34 100644 --- a/arch/arm/mach-mmp/include/mach/regs-icu.h +++ b/arch/arm/mach-mmp/regs-icu.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-mmp/include/mach/regs-icu.h - * * Interrupt Control Unit * * This program is free software; you can redistribute it and/or modify @@ -11,7 +9,7 @@ #ifndef __ASM_MACH_ICU_H #define __ASM_MACH_ICU_H -#include <mach/addr-map.h> +#include "addr-map.h" #define ICU_VIRT_BASE (AXI_VIRT_BASE + 0x82000) #define ICU_REG(x) (ICU_VIRT_BASE + (x)) diff --git a/arch/arm/mach-mmp/include/mach/regs-timers.h b/arch/arm/mach-mmp/regs-timers.h index 45589fec9..d3611c0be 100644 --- a/arch/arm/mach-mmp/include/mach/regs-timers.h +++ b/arch/arm/mach-mmp/regs-timers.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-mmp/include/mach/regs-timers.h - * * Timers Module * * This program is free software; you can redistribute it and/or modify @@ -11,7 +9,7 @@ #ifndef __ASM_MACH_REGS_TIMERS_H #define __ASM_MACH_REGS_TIMERS_H -#include <mach/addr-map.h> +#include "addr-map.h" #define TIMERS1_VIRT_BASE (APB_VIRT_BASE + 0x14000) #define TIMERS2_VIRT_BASE (APB_VIRT_BASE + 0x16000) diff --git a/arch/arm/mach-mmp/include/mach/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h index b047bf487..b047bf487 100644 --- a/arch/arm/mach-mmp/include/mach/regs-usb.h +++ b/arch/arm/mach-mmp/regs-usb.h diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index cdfc9bfee..efe35fade 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -16,10 +16,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/addr-map.h> -#include <mach/mfp-pxa910.h> -#include <mach/pxa910.h> -#include <mach/irqs.h> +#include "addr-map.h" +#include "mfp-pxa910.h" +#include "pxa910.h" +#include "irqs.h" #include "common.h" diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c index 6aa53fb29..cf038eb3b 100644 --- a/arch/arm/mach-mmp/teton_bga.c +++ b/arch/arm/mach-mmp/teton_bga.c @@ -23,11 +23,11 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/addr-map.h> -#include <mach/mfp-pxa168.h> -#include <mach/pxa168.h> -#include <mach/teton_bga.h> -#include <mach/irqs.h> +#include "addr-map.h" +#include "mfp-pxa168.h" +#include "pxa168.h" +#include "teton_bga.h" +#include "irqs.h" #include "common.h" diff --git a/arch/arm/mach-mmp/include/mach/teton_bga.h b/arch/arm/mach-mmp/teton_bga.h index 61a539b2c..019730f5a 100644 --- a/arch/arm/mach-mmp/include/mach/teton_bga.h +++ b/arch/arm/mach-mmp/teton_bga.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-mmp/include/mach/teton_bga.h - * * Support for the Marvell PXA168 Teton BGA Development Platform. * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index dbc697b2f..3c2c92aaa 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -29,14 +29,13 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/sched_clock.h> - -#include <mach/addr-map.h> -#include <mach/regs-timers.h> -#include <mach/regs-apbc.h> -#include <mach/irqs.h> -#include <mach/cputype.h> #include <asm/mach/time.h> +#include "addr-map.h" +#include "regs-timers.h" +#include "regs-apbc.h" +#include "irqs.h" +#include "cputype.h" #include "clock.h" #ifdef CONFIG_CPU_MMP2 diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index ac4af81de..d90c74fa6 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -26,11 +26,11 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <mach/addr-map.h> -#include <mach/mfp-pxa910.h> -#include <mach/pxa910.h> -#include <mach/irqs.h> -#include <mach/regs-usb.h> +#include "addr-map.h" +#include "mfp-pxa910.h" +#include "pxa910.h" +#include "irqs.h" +#include "regs-usb.h" #include "common.h" diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index f49328c39..180d9d216 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_MOXART - bool "MOXA ART SoC" if ARCH_MULTI_V4 + bool "MOXA ART SoC" + depends on ARCH_MULTI_V4 select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE select CLKSRC_MMIO diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index f2d309d06..a32575fa3 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -1,6 +1,15 @@ -if ARCH_MV78XX0 +menuconfig ARCH_MV78XX0 + bool "Marvell MV78xx0" if ARCH_MULTI_V5 + select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON + select MVEBU_MBUS + select PCI + select PLAT_ORION_LEGACY + help + Support for the following Marvell MV78xx0 series SoCs: + MV781x0, MV782x0. -menu "Marvell MV78xx0 Implementations" +if ARCH_MV78XX0 config MACH_DB78X00_BP bool "Marvell DB-78x00-BP Development Board" @@ -20,6 +29,4 @@ config MACH_TERASTATION_WXL Say 'Y' here if you want your kernel to support the Buffalo WXL Nas. -endmenu - endif diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile index 7cd04634d..ddb3aa98a 100644 --- a/arch/arm/mach-mv78xx0/Makefile +++ b/arch/arm/mach-mv78xx0/Makefile @@ -1,3 +1,5 @@ +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include + obj-y += common.o mpp.o irq.o pcie.o obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/bridge-regs.h index e20d6da23..2f54e1753 100644 --- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h +++ b/arch/arm/mach-mv78xx0/bridge-regs.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h - * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. @@ -9,7 +7,7 @@ #ifndef __ASM_ARCH_BRIDGE_REGS_H #define __ASM_ARCH_BRIDGE_REGS_H -#include <mach/mv78xx0.h> +#include "mv78xx0.h" #define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) #define L2_WRITETHROUGH 0x00020000 diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c index 1f2ef98b3..e112f2e7c 100644 --- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c +++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c @@ -17,9 +17,9 @@ #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> #include <linux/i2c.h> -#include <mach/mv78xx0.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "mv78xx0.h" #include "common.h" #include "mpp.h" @@ -146,6 +146,7 @@ subsys_initcall(wxl_pci_init); MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */ .atag_offset = 0x100, + .nr_irqs = MV78XX0_NR_IRQS, .init_machine = wxl_init, .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index e6ac679be..a1a04df9c 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -18,13 +18,13 @@ #include <asm/hardware/cache-feroceon-l2.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/mv78xx0.h> -#include <mach/bridge-regs.h> #include <linux/platform_data/usb-ehci-orion.h> #include <linux/platform_data/mtd-orion_nand.h> #include <plat/time.h> #include <plat/common.h> #include <plat/addr-map.h> +#include "mv78xx0.h" +#include "bridge-regs.h" #include "common.h" static int get_tclk(void); diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c index 4e0f22b30..cf16e08d4 100644 --- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -15,9 +15,9 @@ #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> #include <linux/i2c.h> -#include <mach/mv78xx0.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "mv78xx0.h" #include "common.h" static struct mv643xx_eth_platform_data db78x00_ge00_data = { @@ -94,6 +94,7 @@ subsys_initcall(db78x00_pci_init); MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ .atag_offset = 0x100, + .nr_irqs = MV78XX0_NR_IRQS, .init_machine = db78x00_init, .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S deleted file mode 100644 index 6b1f088e0..000000000 --- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Marvell MV78xx0 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <mach/bridge-regs.h> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ check low interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] - ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] - mov \irqnr, #31 - ands \irqstat, \irqstat, \tmp - bne 1001f - - @ if no low interrupts set, check high interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] - ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF] - mov \irqnr, #63 - ands \irqstat, \irqstat, \tmp - bne 1001f - - @ if no high interrupts set, check error interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_ERR_OFF] - ldr \tmp, [\base, #IRQ_MASK_ERR_OFF] - mov \irqnr, #95 - ands \irqstat, \irqstat, \tmp - - @ find first active interrupt source -1001: clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/mach-mv78xx0/include/mach/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h deleted file mode 100644 index 67cab0a08..000000000 --- a/arch/arm/mach-mv78xx0/include/mach/hardware.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/hardware.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "mv78xx0.h" - -#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h deleted file mode 100644 index 6a761c44a..000000000 --- a/arch/arm/mach-mv78xx0/include/mach/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/uncompress.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/serial_reg.h> -#include <mach/mv78xx0.h> - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 320734440..788569e96 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -11,9 +11,10 @@ #include <linux/kernel.h> #include <linux/irq.h> #include <linux/io.h> -#include <mach/bridge-regs.h> +#include <asm/exception.h> #include <plat/orion-gpio.h> #include <plat/irq.h> +#include "bridge-regs.h" #include "common.h" static int __initdata gpio0_irqs[4] = { @@ -23,12 +24,44 @@ static int __initdata gpio0_irqs[4] = { IRQ_MV78XX0_GPIO_24_31, }; +static void __iomem *mv78xx0_irq_base = IRQ_VIRT_BASE; + +static asmlinkage void +__exception_irq_entry mv78xx0_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_LOW_OFF); + stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_LOW_OFF); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_HIGH_OFF); + stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_HIGH_OFF); + if (stat) { + unsigned int hwirq = 32 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_ERR_OFF); + stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_ERR_OFF); + if (stat) { + unsigned int hwirq = 64 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} + void __init mv78xx0_init_irq(void) { orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF); + set_handle_irq(mv78xx0_legacy_handle_irq); + /* * Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask * registers for core #1 are at an offset of 0x18 from those of diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/irqs.h index fa1d42219..67e0fe730 100644 --- a/arch/arm/mach-mv78xx0/include/mach/irqs.h +++ b/arch/arm/mach-mv78xx0/irqs.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-mv78xx0/include/mach/irqs.h - * * IRQ definitions for Marvell MV78xx0 SoCs * * This file is licensed under the terms of the GNU General Public @@ -88,7 +86,7 @@ #define IRQ_MV78XX0_GPIO_START 96 #define NR_GPIO_IRQS 32 -#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS) +#define MV78XX0_NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS) #endif diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index df5034217..72843c02e 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/io.h> #include <plat/mpp.h> -#include <mach/hardware.h> +#include "mv78xx0.h" #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h index 723748d8b..2db1265ec 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/mv78xx0.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h - * * Generic definitions for Marvell MV78xx0 SoC flavors: * MV781x0 and MV782x0. * @@ -12,6 +10,8 @@ #ifndef __ASM_ARCH_MV78XX0_H #define __ASM_ARCH_MV78XX0_H +#include "irqs.h" + /* * Marvell MV78xx0 address maps. * diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index 097ea4cb1..13a7d72ee 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -15,7 +15,7 @@ #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> -#include <mach/mv78xx0.h> +#include "mv78xx0.h" #include "common.h" #define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4) diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c index d2d06f395..308ab71ec 100644 --- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c +++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c @@ -14,9 +14,9 @@ #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> -#include <mach/mv78xx0.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "mv78xx0.h" #include "common.h" static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = { @@ -79,6 +79,7 @@ subsys_initcall(rd78x00_pci_init); MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ .atag_offset = 0x100, + .nr_irqs = MV78XX0_NR_IRQS, .init_machine = rd78x00_masa_init, .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index e20fc4178..64e3d2ce9 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_MVEBU - bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5) + bool "Marvell Engineering Business Unit (MVEBU) SoCs" + depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select GENERIC_IRQ_CHIP @@ -25,7 +26,8 @@ config MACH_MVEBU_V7 select MACH_MVEBU_ANY config MACH_ARMADA_370 - bool "Marvell Armada 370 boards" if ARCH_MULTI_V7 + bool "Marvell Armada 370 boards" + depends on ARCH_MULTI_V7 select ARMADA_370_CLK select CPU_PJ4B select MACH_MVEBU_V7 @@ -35,7 +37,8 @@ config MACH_ARMADA_370 on the Marvell Armada 370 SoC with device tree. config MACH_ARMADA_375 - bool "Marvell Armada 375 boards" if ARCH_MULTI_V7 + bool "Marvell Armada 375 boards" + depends on ARCH_MULTI_V7 select ARM_ERRATA_720789 select ARM_ERRATA_753970 select ARM_GIC @@ -50,7 +53,8 @@ config MACH_ARMADA_375 on the Marvell Armada 375 SoC with device tree. config MACH_ARMADA_38X - bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7 + bool "Marvell Armada 380/385 boards" + depends on ARCH_MULTI_V7 select ARM_ERRATA_720789 select ARM_ERRATA_753970 select ARM_GIC @@ -65,7 +69,8 @@ config MACH_ARMADA_38X on the Marvell Armada 380/385 SoC with device tree. config MACH_ARMADA_39X - bool "Marvell Armada 39x boards" if ARCH_MULTI_V7 + bool "Marvell Armada 39x boards" + depends on ARCH_MULTI_V7 select ARM_GIC select ARMADA_39X_CLK select CACHE_L2X0 @@ -79,7 +84,8 @@ config MACH_ARMADA_39X on the Marvell Armada 39x SoC with device tree. config MACH_ARMADA_XP - bool "Marvell Armada XP boards" if ARCH_MULTI_V7 + bool "Marvell Armada XP boards" + depends on ARCH_MULTI_V7 select ARMADA_XP_CLK select CPU_PJ4B select MACH_MVEBU_V7 @@ -89,7 +95,8 @@ config MACH_ARMADA_XP on the Marvell Armada XP SoC with device tree. config MACH_DOVE - bool "Marvell Dove boards" if ARCH_MULTI_V7 + bool "Marvell Dove boards" + depends on ARCH_MULTI_V7 select CACHE_L2X0 select CPU_PJ4 select DOVE_CLK @@ -103,7 +110,8 @@ config MACH_DOVE Marvell Dove using flattened device tree. config MACH_KIRKWOOD - bool "Marvell Kirkwood boards" if ARCH_MULTI_V5 + bool "Marvell Kirkwood boards" + depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select KIRKWOOD_CLK diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h index c55bbf81d..09413b678 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.h +++ b/arch/arm/mach-mvebu/armada-370-xp.h @@ -17,7 +17,7 @@ #ifdef CONFIG_SMP void armada_xp_secondary_startup(void); -extern struct smp_operations armada_xp_smp_ops; +extern const struct smp_operations armada_xp_smp_ops; #endif #endif /* __MACH_ARMADA_370_XP_H */ diff --git a/arch/arm/mach-mvebu/include/mach/gpio.h b/arch/arm/mach-mvebu/include/mach/gpio.h deleted file mode 100644 index 40a8c178f..000000000 --- a/arch/arm/mach-mvebu/include/mach/gpio.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c index 3d5000481..d715dec1c 100644 --- a/arch/arm/mach-mvebu/platsmp-a9.c +++ b/arch/arm/mach-mvebu/platsmp-a9.c @@ -93,11 +93,11 @@ static int armada_38x_cpu_kill(unsigned int cpu) } #endif -static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = { +static const struct smp_operations mvebu_cortex_a9_smp_ops __initconst = { .smp_boot_secondary = mvebu_cortex_a9_boot_secondary, }; -static struct smp_operations armada_38x_smp_ops __initdata = { +static const struct smp_operations armada_38x_smp_ops __initconst = { .smp_boot_secondary = mvebu_cortex_a9_boot_secondary, .smp_secondary_init = armada_38x_secondary_init, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index 58cc8c157..f9597b701 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -170,7 +170,7 @@ static int armada_xp_cpu_kill(unsigned int cpu) } #endif -struct smp_operations armada_xp_smp_ops __initdata = { +const struct smp_operations armada_xp_smp_ops __initconst = { .smp_init_cpus = armada_xp_smp_init_cpus, .smp_prepare_cpus = armada_xp_smp_prepare_cpus, .smp_boot_secondary = armada_xp_boot_secondary, diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index a95499ea8..6613a6ff5 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,7 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/basic_mmio_gpio.h> +#include <linux/gpio/driver.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> @@ -41,7 +41,7 @@ #include <mach/hardware.h> #include <mach/ams-delta-fiq.h> -#include <mach/camera.h> +#include "camera.h" #include <mach/usb.h> #include "iomap.h" diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 0fb51d22c..fad95b74b 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -29,7 +29,7 @@ #include <mach/tc.h> #include <mach/mux.h> -#include <mach/flash.h> +#include "flash.h" #include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 8340d684d..cd146ed05 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -42,7 +42,7 @@ #include <linux/omap-dma.h> #include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <mach/flash.h> +#include "flash.h" #include <mach/hardware.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 086ff34e0..f7c8c63dd 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -44,7 +44,7 @@ #include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> #include <linux/omap-dma.h> -#include <mach/flash.h> +#include "flash.h" #include <mach/hardware.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index ed4e045c2..ae90bd02b 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -32,7 +32,7 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <mach/flash.h> +#include "flash.h" #include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c index 4d0835327..7684f9203 100644 --- a/arch/arm/mach-omap1/board-nand.c +++ b/arch/arm/mach-omap1/board-nand.c @@ -22,7 +22,7 @@ void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); unsigned long mask; if (cmd == NAND_CMD_NONE) diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 0efd165b8..209aecb0d 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -46,7 +46,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/flash.h> +#include "flash.h" #include <mach/mux.h> #include <mach/tc.h> diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 1142ae431..e5288cda1 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -34,7 +34,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/flash.h> +#include "flash.h" #include <mach/mux.h> #include <mach/tc.h> #include <linux/omap-dma.h> diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 54a547a96..d672495f7 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -34,7 +34,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/flash.h> +#include "flash.h" #include <mach/mux.h> #include <linux/omap-dma.h> #include <mach/tc.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 87ec04ae4..aaf741b0a 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -36,7 +36,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/flash.h> +#include "flash.h" #include <mach/mux.h> #include <linux/omap-dma.h> #include <mach/tc.h> diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 3d76f0540..150b57ba4 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -30,7 +30,7 @@ #include <mach/tc.h> #include <mach/mux.h> -#include <mach/flash.h> +#include "flash.h" #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 4fcf19c78..a9373570b 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -16,7 +16,7 @@ #include <linux/platform_device.h> #include <mach/hardware.h> -#include <mach/board-sx1.h> +#include "board-sx1.h" #include "mmc.h" diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 939991ea3..6c482254b 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -34,11 +34,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/flash.h> +#include "flash.h" #include <mach/mux.h> #include <linux/omap-dma.h> #include <mach/tc.h> -#include <mach/board-sx1.h> +#include "board-sx1.h" #include <mach/hardware.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap1/include/mach/board-sx1.h b/arch/arm/mach-omap1/board-sx1.h index 355adbdaa..355adbdaa 100644 --- a/arch/arm/mach-omap1/include/mach/board-sx1.h +++ b/arch/arm/mach-omap1/board-sx1.h diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/camera.h index 847d00f0b..caa6c0d6f 100644 --- a/arch/arm/mach-omap1/include/mach/camera.h +++ b/arch/arm/mach-omap1/camera.h @@ -1,7 +1,7 @@ #ifndef __ASM_ARCH_CAMERA_H_ #define __ASM_ARCH_CAMERA_H_ -#include <media/omap1_camera.h> +#include <linux/platform_data/media/omap1_camera.h> void omap1_camera_init(void *); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 325e60300..8c8be861f 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -25,7 +25,7 @@ #include <mach/mux.h> #include <mach/omap7xx.h> -#include <mach/camera.h> +#include "camera.h" #include <mach/hardware.h> #include "common.h" @@ -33,24 +33,6 @@ #include "mmc.h" #include "sram.h" -#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) - -static struct platform_device omap_pcm = { - .name = "omap-pcm-audio", - .id = -1, -}; - -static void omap_init_audio(void) -{ - platform_device_register(&omap_pcm); -} - -#else -static inline void omap_init_audio(void) {} -#endif - -/*-------------------------------------------------------------------------*/ - #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE) #define OMAP_RTC_BASE 0xfffb4800 @@ -425,7 +407,6 @@ static int __init omap1_init_devices(void) * in alphabetical order so they're easier to sort through. */ - omap_init_audio(); omap_init_mbox(); omap_init_rtc(); omap_init_spi100k(); diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index b3fb531af..99cda402e 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -11,7 +11,7 @@ #include <linux/mtd/map.h> #include <mach/tc.h> -#include <mach/flash.h> +#include "flash.h" #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/include/mach/flash.h b/arch/arm/mach-omap1/flash.h index 0d88499b7..0d88499b7 100644 --- a/arch/arm/mach-omap1/include/mach/flash.h +++ b/arch/arm/mach-omap1/flash.h diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ceefcee6b..0ba6a0e6f 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -223,8 +223,6 @@ obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o # EMU peripherals obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o -obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o - # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 04a56cc04..bab814d2f 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -16,7 +16,9 @@ #include <linux/of_platform.h> #include <linux/irqdomain.h> +#include <asm/setup.h> #include <asm/mach/arch.h> +#include <asm/system_info.h> #include "common.h" @@ -76,8 +78,36 @@ static const char *const n900_boards_compat[] __initconst = { NULL, }; +/* Set system_rev from atags */ +static void __init rx51_set_system_rev(const struct tag *tags) +{ + const struct tag *tag; + + if (tags->hdr.tag != ATAG_CORE) + return; + + for_each_tag(tag, tags) { + if (tag->hdr.tag == ATAG_REVISION) { + system_rev = tag->u.revision.rev; + break; + } + } +} + +/* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags, + * save them while the data is still not overwritten + */ +static void __init rx51_reserve(void) +{ + const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100); + + save_atags(tags); + rx51_set_system_rev(tags); + omap_reserve(); +} + DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board") - .reserve = omap_reserve, + .reserve = rx51_reserve, .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_machine = omap_generic_init, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 14edcd7a2..da174c0d6 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -39,7 +39,7 @@ #include <sound/tlv320aic3x.h> #include <sound/tpa6130a2-plat.h> -#include <media/si4713.h> +#include <linux/platform_data/media/si4713.h> #include <linux/platform_data/leds-lp55xx.h> #include <linux/platform_data/tsl2563.h> @@ -48,7 +48,7 @@ #include <video/omap-panel-data.h> #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) -#include <media/ir-rx51.h> +#include <linux/platform_data/media/ir-rx51.h> #endif #include "mux.h" @@ -1257,7 +1257,7 @@ static struct platform_device omap3_rom_rng_device = { static void __init rx51_init_omap3_rom_rng(void) { if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { - pr_info("RX-51: Registring OMAP3 HWRNG device\n"); + pr_info("RX-51: Registering OMAP3 HWRNG device\n"); platform_device_register(&omap3_rom_rng_device); } } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index acb60ed17..d05812587 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -225,5 +225,9 @@ void __init ti_clk_init_features(void) if (omap_rev() == OMAP3430_REV_ES1_0) features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM; + /* Errata I810 for omap5 / dra7 */ + if (soc_is_omap54xx() || soc_is_dra7xx()) + features.flags |= TI_CLK_ERRATA_I810; + ti_clk_setup_features(&features); } diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c index 53442c86a..3b5fb05ae 100644 --- a/arch/arm/mach-omap2/clockdomains81xx_data.c +++ b/arch/arm/mach-omap2/clockdomains81xx_data.c @@ -83,6 +83,14 @@ static struct clockdomain mmu_cfg_81xx_clkdm = { .flags = CLKDM_CAN_SWSUP, }; +static struct clockdomain default_l3_slow_81xx_clkdm = { + .name = "default_l3_slow_clkdm", + .pwrdm = { .name = "default_pwrdm" }, + .cm_inst = TI81XX_CM_DEFAULT_MOD, + .clkdm_offs = TI816X_CM_DEFAULT_L3_SLOW_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + /* 816x only */ static struct clockdomain alwon_mpu_816x_clkdm = { @@ -96,7 +104,7 @@ static struct clockdomain alwon_mpu_816x_clkdm = { static struct clockdomain active_gem_816x_clkdm = { .name = "active_gem_clkdm", .pwrdm = { .name = "active_pwrdm" }, - .cm_inst = TI816X_CM_ACTIVE_MOD, + .cm_inst = TI81XX_CM_ACTIVE_MOD, .clkdm_offs = TI816X_CM_ACTIVE_GEM_CLKDM, .flags = CLKDM_CAN_SWSUP, }; @@ -128,7 +136,7 @@ static struct clockdomain ivahd2_816x_clkdm = { static struct clockdomain sgx_816x_clkdm = { .name = "sgx_clkdm", .pwrdm = { .name = "sgx_pwrdm" }, - .cm_inst = TI816X_CM_SGX_MOD, + .cm_inst = TI81XX_CM_SGX_MOD, .clkdm_offs = TI816X_CM_SGX_CLKDM, .flags = CLKDM_CAN_SWSUP, }; @@ -136,7 +144,7 @@ static struct clockdomain sgx_816x_clkdm = { static struct clockdomain default_l3_med_816x_clkdm = { .name = "default_l3_med_clkdm", .pwrdm = { .name = "default_pwrdm" }, - .cm_inst = TI816X_CM_DEFAULT_MOD, + .cm_inst = TI81XX_CM_DEFAULT_MOD, .clkdm_offs = TI816X_CM_DEFAULT_L3_MED_CLKDM, .flags = CLKDM_CAN_SWSUP, }; @@ -144,7 +152,7 @@ static struct clockdomain default_l3_med_816x_clkdm = { static struct clockdomain default_ducati_816x_clkdm = { .name = "default_ducati_clkdm", .pwrdm = { .name = "default_pwrdm" }, - .cm_inst = TI816X_CM_DEFAULT_MOD, + .cm_inst = TI81XX_CM_DEFAULT_MOD, .clkdm_offs = TI816X_CM_DEFAULT_DUCATI_CLKDM, .flags = CLKDM_CAN_SWSUP, }; @@ -152,19 +160,11 @@ static struct clockdomain default_ducati_816x_clkdm = { static struct clockdomain default_pci_816x_clkdm = { .name = "default_pci_clkdm", .pwrdm = { .name = "default_pwrdm" }, - .cm_inst = TI816X_CM_DEFAULT_MOD, + .cm_inst = TI81XX_CM_DEFAULT_MOD, .clkdm_offs = TI816X_CM_DEFAULT_PCI_CLKDM, .flags = CLKDM_CAN_SWSUP, }; -static struct clockdomain default_l3_slow_816x_clkdm = { - .name = "default_l3_slow_clkdm", - .pwrdm = { .name = "default_pwrdm" }, - .cm_inst = TI816X_CM_DEFAULT_MOD, - .clkdm_offs = TI816X_CM_DEFAULT_L3_SLOW_CLKDM, - .flags = CLKDM_CAN_SWSUP, -}; - static struct clockdomain *clockdomains_ti814x[] __initdata = { &alwon_l3_slow_81xx_clkdm, &alwon_l3_med_81xx_clkdm, @@ -172,6 +172,7 @@ static struct clockdomain *clockdomains_ti814x[] __initdata = { &alwon_ethernet_81xx_clkdm, &mmu_81xx_clkdm, &mmu_cfg_81xx_clkdm, + &default_l3_slow_81xx_clkdm, NULL, }; @@ -198,7 +199,7 @@ static struct clockdomain *clockdomains_ti816x[] __initdata = { &default_l3_med_816x_clkdm, &default_ducati_816x_clkdm, &default_pci_816x_clkdm, - &default_l3_slow_816x_clkdm, + &default_l3_slow_81xx_clkdm, NULL, }; diff --git a/arch/arm/mach-omap2/cm81xx.h b/arch/arm/mach-omap2/cm81xx.h index 45cb407da..3a0ccf07c 100644 --- a/arch/arm/mach-omap2/cm81xx.h +++ b/arch/arm/mach-omap2/cm81xx.h @@ -18,15 +18,15 @@ #define __ARCH_ARM_MACH_OMAP2_CM_TI81XX_H /* TI81XX common CM module offsets */ +#define TI81XX_CM_ACTIVE_MOD 0x0400 /* 256B */ +#define TI81XX_CM_DEFAULT_MOD 0x0500 /* 256B */ #define TI81XX_CM_ALWON_MOD 0x1400 /* 1KB */ +#define TI81XX_CM_SGX_MOD 0x0900 /* 256B */ /* TI816X CM module offsets */ -#define TI816X_CM_ACTIVE_MOD 0x0400 /* 256B */ -#define TI816X_CM_DEFAULT_MOD 0x0500 /* 256B */ #define TI816X_CM_IVAHD0_MOD 0x0600 /* 256B */ #define TI816X_CM_IVAHD1_MOD 0x0700 /* 256B */ #define TI816X_CM_IVAHD2_MOD 0x0800 /* 256B */ -#define TI816X_CM_SGX_MOD 0x0900 /* 256B */ /* ALWON */ #define TI81XX_CM_ALWON_L3_SLOW_CLKDM 0x0000 diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 0cba9575d..f7666b9f3 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -270,7 +270,7 @@ extern u32 omap_read_auxcoreboot0(void); extern void omap4_cpu_die(unsigned int cpu); -extern struct smp_operations omap4_smp_ops; +extern const struct smp_operations omap4_smp_ops; extern void omap5_secondary_startup(void); extern void omap5_secondary_hyp_startup(void); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9374da313..d7f1d69da 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -18,7 +18,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/pinctrl/machine.h> -#include <linux/platform_data/mailbox-omap.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -66,50 +65,8 @@ static int __init omap3_l3_init(void) } omap_postcore_initcall(omap3_l3_init); -#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) -static inline void __init omap_init_mbox(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - struct omap_mbox_pdata *pdata; - - oh = omap_hwmod_lookup("mailbox"); - if (!oh) { - pr_err("%s: unable to find hwmod\n", __func__); - return; - } - if (!oh->dev_attr) { - pr_err("%s: hwmod doesn't have valid attrs\n", __func__); - return; - } - - pdata = (struct omap_mbox_pdata *)oh->dev_attr; - pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata)); - WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", - __func__, PTR_ERR(pdev)); -} -#else -static inline void omap_init_mbox(void) { } -#endif /* CONFIG_OMAP2PLUS_MBOX */ - static inline void omap_init_sti(void) {} -#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) - -static struct platform_device omap_pcm = { - .name = "omap-pcm-audio", - .id = -1, -}; - -static void omap_init_audio(void) -{ - platform_device_register(&omap_pcm); -} - -#else -static inline void omap_init_audio(void) {} -#endif - #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <linux/platform_data/spi-omap2-mcspi.h> @@ -239,14 +196,12 @@ static int __init omap2_init_devices(void) if (!of_have_populated_dt()) pinctrl_provide_dummies(); - /* - * please keep these calls, and their implementations above, - * in alphabetical order so they're easier to sort through. - */ - omap_init_audio(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { - omap_init_mbox(); + /* + * please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ omap_init_mcspi(); omap_init_sham(); omap_init_aes(); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 8a2ae82cb..d85c24918 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -488,6 +488,7 @@ void __init omap3xxx_check_revision(void) } break; case 0xb8f2: + case 0xb968: switch (rev) { case 0: /* FALLTHROUGH */ @@ -511,7 +512,8 @@ void __init omap3xxx_check_revision(void) /* Unknown default to latest silicon rev as default */ omap_revision = OMAP3630_REV_ES1_2; cpu_rev = "1.2"; - pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n"); + pr_warn("Warning: unknown chip type: hawkeye %04x, assuming OMAP3630ES1.2\n", + hawkeye); } sprintf(soc_rev, "ES%s", cpu_rev); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3eaeaca5d..3c87e4065 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -612,8 +612,7 @@ void __init ti814x_init_early(void) ti814x_clockdomains_init(); dm814x_hwmod_init(); omap_hwmod_init_postsetup(); - if (of_have_populated_dt()) - omap_clk_soc_init = dm814x_dt_clk_init; + omap_clk_soc_init = dm814x_dt_clk_init; } void __init ti816x_init_early(void) diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c deleted file mode 100644 index 8867eb402..000000000 --- a/arch/arm/mach-omap2/omap-iommu.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * omap iommu: omap device registration - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/err.h> -#include <linux/slab.h> - -#include <linux/platform_data/iommu-omap.h> -#include "soc.h" -#include "omap_hwmod.h" -#include "omap_device.h" - -static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused) -{ - struct platform_device *pdev; - struct iommu_platform_data *pdata; - struct omap_mmu_dev_attr *a = (struct omap_mmu_dev_attr *)oh->dev_attr; - static int i; - - pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; - - pdata->name = oh->name; - pdata->nr_tlb_entries = a->nr_tlb_entries; - - if (oh->rst_lines_cnt == 1) { - pdata->reset_name = oh->rst_lines->name; - pdata->assert_reset = omap_device_assert_hardreset; - pdata->deassert_reset = omap_device_deassert_hardreset; - } - - pdev = omap_device_build("omap-iommu", i, oh, pdata, sizeof(*pdata)); - - kfree(pdata); - - if (IS_ERR(pdev)) { - pr_err("%s: device build err: %ld\n", __func__, PTR_ERR(pdev)); - return PTR_ERR(pdev); - } - - i++; - - return 0; -} - -static int __init omap_iommu_init(void) -{ - /* If dtb is there, the devices will be created dynamically */ - if (of_have_populated_dt()) - return -ENODEV; - - return omap_hwmod_for_each_by_class("mmu", omap_iommu_dev_init, NULL); -} -omap_subsys_initcall(omap_iommu_init); -/* must be ready before omap3isp is probed */ diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 79e1f876d..c625cc10d 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -241,7 +241,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) } -struct smp_operations omap4_smp_ops __initdata = { +const struct smp_operations omap4_smp_ops __initconst = { .smp_init_cpus = omap4_smp_init_cpus, .smp_prepare_cpus = omap4_smp_prepare_cpus, .smp_secondary_init = omap4_secondary_init, diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c index d937b2e40..497269db8 100644 --- a/arch/arm/mach-omap2/omap2-restart.c +++ b/arch/arm/mach-omap2/omap2-restart.c @@ -62,4 +62,4 @@ static int __init omap2xxx_common_look_up_clks_for_reset(void) return 0; } -omap_core_initcall(omap2xxx_common_look_up_clks_for_reset); +omap_postcore_initcall(omap2xxx_common_look_up_clks_for_reset); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 72ebc4c16..f7ff3b9da 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -32,6 +32,7 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/pm_domain.h> #include <linux/pm_runtime.h> #include <linux/of.h> #include <linux/notifier.h> @@ -168,7 +169,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) r->name = dev_name(&pdev->dev); } - pdev->dev.pm_domain = &omap_device_pm_domain; + dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain); if (device_active) { omap_device_enable(pdev); @@ -180,7 +181,7 @@ odbfd_exit1: odbfd_exit: /* if data/we are at fault.. load up a fail handler */ if (ret) - pdev->dev.pm_domain = &omap_device_fail_pm_domain; + dev_pm_domain_set(&pdev->dev, &omap_device_fail_pm_domain); return ret; } @@ -190,12 +191,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb, { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od; + int err; switch (event) { case BUS_NOTIFY_DEL_DEVICE: if (pdev->archdata.od) omap_device_delete(pdev->archdata.od); break; + case BUS_NOTIFY_UNBOUND_DRIVER: + od = to_omap_device(pdev); + if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) { + dev_info(dev, "enabled after unload, idling\n"); + err = omap_device_idle(pdev); + if (err) + dev_err(dev, "failed to idle\n"); + } + break; case BUS_NOTIFY_ADD_DEVICE: if (pdev->dev.of_node) omap_device_build_from_dt(pdev); @@ -601,8 +612,10 @@ static int _od_runtime_resume(struct device *dev) int ret; ret = omap_device_enable(pdev); - if (ret) + if (ret) { + dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n"); return ret; + } return pm_generic_runtime_resume(dev); } @@ -701,7 +714,7 @@ int omap_device_register(struct platform_device *pdev) { pr_debug("omap_device: %s: registering\n", pdev->name); - pdev->dev.pm_domain = &omap_device_pm_domain; + dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain); return platform_device_add(pdev); } @@ -869,7 +882,7 @@ static int __init omap_device_init(void) bus_register_notifier(&platform_bus_type, &platform_nb); return 0; } -omap_core_initcall(omap_device_init); +omap_postcore_initcall(omap_device_init); /** * omap_device_late_idle - idle devices without drivers diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 48495ad82..b6d62e4cd 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2200,6 +2200,11 @@ static int _enable(struct omap_hwmod *oh) */ static int _idle(struct omap_hwmod *oh) { + if (oh->flags & HWMOD_NO_IDLE) { + oh->_int_flags |= _HWMOD_SKIP_ENABLE; + return 0; + } + pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { @@ -2504,6 +2509,8 @@ static int __init _init(struct omap_hwmod *oh, void *data) oh->flags |= HWMOD_INIT_NO_RESET; if (of_find_property(np, "ti,no-idle-on-init", NULL)) oh->flags |= HWMOD_INIT_NO_IDLE; + if (of_find_property(np, "ti,no-idle", NULL)) + oh->flags |= HWMOD_NO_IDLE; } oh->_state = _HWMOD_STATE_INITIALIZED; @@ -2630,7 +2637,7 @@ static void __init _setup_postsetup(struct omap_hwmod *oh) * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data - * it should be set by the core code as a runtime flag during startup */ - if ((oh->flags & HWMOD_INIT_NO_IDLE) && + if ((oh->flags & (HWMOD_INIT_NO_IDLE | HWMOD_NO_IDLE)) && (postsetup_state == _HWMOD_STATE_IDLE)) { oh->_int_flags |= _HWMOD_SKIP_ENABLE; postsetup_state = _HWMOD_STATE_ENABLED; @@ -3313,7 +3320,7 @@ static int __init omap_hwmod_setup_all(void) return 0; } -omap_core_initcall(omap_hwmod_setup_all); +omap_postcore_initcall(omap_hwmod_setup_all); /** * omap_hwmod_enable - enable an omap_hwmod diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 76bce11c8..7c7a31169 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -525,6 +525,8 @@ struct omap_hwmod_omap4_prcm { * or idled. * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to * operate and they need to be handled at the same time as the main_clk. + * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain + * IPs like CPSW on DRA7, where clocks to this module cannot be disabled. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -541,6 +543,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_SWSUP_SIDLE_ACT (1 << 12) #define HWMOD_RECONFIG_IO_CHAIN (1 << 13) #define HWMOD_OPT_CLKS_NEEDED (1 << 14) +#define HWMOD_NO_IDLE (1 << 15) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index aff78d519..0a985325c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -25,7 +25,6 @@ #include "l4_3xxx.h" #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> #include "soc.h" @@ -2957,80 +2956,40 @@ static struct omap_hwmod_class omap3xxx_mmu_hwmod_class = { }; /* mmu isp */ - -static struct omap_mmu_dev_attr mmu_isp_dev_attr = { - .nr_tlb_entries = 8, -}; - static struct omap_hwmod omap3xxx_mmu_isp_hwmod; -static struct omap_hwmod_irq_info omap3xxx_mmu_isp_irqs[] = { - { .irq = 24 + OMAP_INTC_START, }, - { .irq = -1 } -}; - -static struct omap_hwmod_addr_space omap3xxx_mmu_isp_addrs[] = { - { - .pa_start = 0x480bd400, - .pa_end = 0x480bd47f, - .flags = ADDR_TYPE_RT, - }, - { } -}; /* l4_core -> mmu isp */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmu_isp = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_mmu_isp_hwmod, - .addr = omap3xxx_mmu_isp_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; static struct omap_hwmod omap3xxx_mmu_isp_hwmod = { .name = "mmu_isp", .class = &omap3xxx_mmu_hwmod_class, - .mpu_irqs = omap3xxx_mmu_isp_irqs, .main_clk = "cam_ick", - .dev_attr = &mmu_isp_dev_attr, .flags = HWMOD_NO_IDLEST, }; /* mmu iva */ -static struct omap_mmu_dev_attr mmu_iva_dev_attr = { - .nr_tlb_entries = 32, -}; - static struct omap_hwmod omap3xxx_mmu_iva_hwmod; -static struct omap_hwmod_irq_info omap3xxx_mmu_iva_irqs[] = { - { .irq = 28 + OMAP_INTC_START, }, - { .irq = -1 } -}; static struct omap_hwmod_rst_info omap3xxx_mmu_iva_resets[] = { { .name = "mmu", .rst_shift = 1, .st_shift = 9 }, }; -static struct omap_hwmod_addr_space omap3xxx_mmu_iva_addrs[] = { - { - .pa_start = 0x5d000000, - .pa_end = 0x5d00007f, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l3_main -> iva mmu */ static struct omap_hwmod_ocp_if omap3xxx_l3_main__mmu_iva = { .master = &omap3xxx_l3_main_hwmod, .slave = &omap3xxx_mmu_iva_hwmod, - .addr = omap3xxx_mmu_iva_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; static struct omap_hwmod omap3xxx_mmu_iva_hwmod = { .name = "mmu_iva", .class = &omap3xxx_mmu_hwmod_class, - .mpu_irqs = omap3xxx_mmu_iva_irqs, .clkdm_name = "iva2_clkdm", .rst_lines = omap3xxx_mmu_iva_resets, .rst_lines_cnt = ARRAY_SIZE(omap3xxx_mmu_iva_resets), @@ -3043,7 +3002,6 @@ static struct omap_hwmod omap3xxx_mmu_iva_hwmod = { .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT, }, }, - .dev_attr = &mmu_iva_dev_attr, .flags = HWMOD_NO_IDLEST, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index a5e444b1e..dad871a4c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -30,7 +30,6 @@ #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> -#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" @@ -2088,30 +2087,16 @@ static struct omap_hwmod_class omap44xx_mmu_hwmod_class = { /* mmu ipu */ -static struct omap_mmu_dev_attr mmu_ipu_dev_attr = { - .nr_tlb_entries = 32, -}; - static struct omap_hwmod omap44xx_mmu_ipu_hwmod; static struct omap_hwmod_rst_info omap44xx_mmu_ipu_resets[] = { { .name = "mmu_cache", .rst_shift = 2 }, }; -static struct omap_hwmod_addr_space omap44xx_mmu_ipu_addrs[] = { - { - .pa_start = 0x55082000, - .pa_end = 0x550820ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l3_main_2 -> mmu_ipu */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__mmu_ipu = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_mmu_ipu_hwmod, .clk = "l3_div_ck", - .addr = omap44xx_mmu_ipu_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2130,35 +2115,20 @@ static struct omap_hwmod omap44xx_mmu_ipu_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, - .dev_attr = &mmu_ipu_dev_attr, }; /* mmu dsp */ -static struct omap_mmu_dev_attr mmu_dsp_dev_attr = { - .nr_tlb_entries = 32, -}; - static struct omap_hwmod omap44xx_mmu_dsp_hwmod; static struct omap_hwmod_rst_info omap44xx_mmu_dsp_resets[] = { { .name = "mmu_cache", .rst_shift = 1 }, }; -static struct omap_hwmod_addr_space omap44xx_mmu_dsp_addrs[] = { - { - .pa_start = 0x4a066000, - .pa_end = 0x4a0660ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l4_cfg -> dsp */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mmu_dsp = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_mmu_dsp_hwmod, .clk = "l4_div_ck", - .addr = omap44xx_mmu_dsp_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2177,7 +2147,6 @@ static struct omap_hwmod omap44xx_mmu_dsp_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, - .dev_attr = &mmu_dsp_dev_attr, }; /* @@ -3915,21 +3884,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space omap44xx_elm_addrs[] = { - { - .pa_start = 0x48078000, - .pa_end = 0x48078fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_per -> elm */ static struct omap_hwmod_ocp_if omap44xx_l4_per__elm = { .master = &omap44xx_l4_per_hwmod, .slave = &omap44xx_elm_hwmod, .clk = "l4_div_ck", - .addr = omap44xx_elm_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index ee4e04434..848356e38 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2103,7 +2103,7 @@ static struct omap_hwmod dra7xx_uart4_hwmod = { .class = &dra7xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", .main_clk = "uart4_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART4_FLAGS, .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index 625605289..e493ae372 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -104,8 +104,8 @@ * The default .clkctrl_offs field is offset from CM_DEFAULT, that's * TRM 18.7.6 CM_DEFAULT device register values minus 0x500 */ -#define DM816X_CM_DEFAULT_OFFSET 0x500 -#define DM816X_CM_DEFAULT_USB_CLKCTRL (0x558 - DM816X_CM_DEFAULT_OFFSET) +#define DM81XX_CM_DEFAULT_OFFSET 0x500 +#define DM81XX_CM_DEFAULT_USB_CLKCTRL (0x558 - DM81XX_CM_DEFAULT_OFFSET) /* L3 Interconnect entries clocked at 125, 250 and 500MHz */ static struct omap_hwmod dm81xx_alwon_l3_slow_hwmod = { @@ -557,22 +557,42 @@ static struct omap_hwmod_class dm81xx_usbotg_class = { .sysc = &dm81xx_usbhsotg_sysc, }; -static struct omap_hwmod dm81xx_usbss_hwmod = { +static struct omap_hwmod dm814x_usbss_hwmod = { + .name = "usb_otg_hs", + .clkdm_name = "default_l3_slow_clkdm", + .main_clk = "pll260dcoclkldo", /* 481c5260.adpll.dcoclkldo */ + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_DEFAULT_USB_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &dm81xx_usbotg_class, +}; + +static struct omap_hwmod_ocp_if dm814x_default_l3_slow__usbss = { + .master = &dm81xx_default_l3_slow_hwmod, + .slave = &dm814x_usbss_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_usbss_hwmod = { .name = "usb_otg_hs", .clkdm_name = "default_l3_slow_clkdm", .main_clk = "sysclk6_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_DEFAULT_USB_CLKCTRL, + .clkctrl_offs = DM81XX_CM_DEFAULT_USB_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, .class = &dm81xx_usbotg_class, }; -static struct omap_hwmod_ocp_if dm81xx_default_l3_slow__usbss = { +static struct omap_hwmod_ocp_if dm816x_default_l3_slow__usbss = { .master = &dm81xx_default_l3_slow_hwmod, - .slave = &dm81xx_usbss_hwmod, + .slave = &dm816x_usbss_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -599,7 +619,7 @@ static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = { static struct omap_hwmod dm814x_timer1_hwmod = { .name = "timer1", .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "timer_sys_ck", + .main_clk = "timer1_fck", .dev_attr = &capability_alwon_dev_attr, .class = &dm816x_timer_hwmod_class, .flags = HWMOD_NO_IDLEST, @@ -608,7 +628,7 @@ static struct omap_hwmod dm814x_timer1_hwmod = { static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm814x_timer1_hwmod, - .clk = "timer_sys_ck", + .clk = "timer1_fck", .user = OCP_USER_MPU, }; @@ -636,7 +656,7 @@ static struct omap_hwmod_ocp_if dm816x_l4_ls__timer1 = { static struct omap_hwmod dm814x_timer2_hwmod = { .name = "timer2", .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "timer_sys_ck", + .main_clk = "timer2_fck", .dev_attr = &capability_alwon_dev_attr, .class = &dm816x_timer_hwmod_class, .flags = HWMOD_NO_IDLEST, @@ -645,7 +665,7 @@ static struct omap_hwmod dm814x_timer2_hwmod = { static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm814x_timer2_hwmod, - .clk = "timer_sys_ck", + .clk = "timer2_fck", .user = OCP_USER_MPU, }; @@ -912,7 +932,7 @@ static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = { +static struct omap_hwmod_class_sysconfig dm81xx_mmc_sysc = { .rev_offs = 0x0, .sysc_offs = 0x110, .syss_offs = 0x114, @@ -923,24 +943,94 @@ static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = { .sysc_fields = &omap_hwmod_sysc_type1, }; -static struct omap_hwmod_class dm816x_mmc_class = { +static struct omap_hwmod_class dm81xx_mmc_class = { .name = "mmc", - .sysc = &dm816x_mmc_sysc, + .sysc = &dm81xx_mmc_sysc, }; -static struct omap_hwmod_opt_clk dm816x_mmc1_opt_clks[] = { +static struct omap_hwmod_opt_clk dm81xx_mmc_opt_clks[] = { { .role = "dbck", .clk = "sysclk18_ck", }, }; -static struct omap_hsmmc_dev_attr mmc1_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, +static struct omap_hsmmc_dev_attr mmc_dev_attr = { +}; + +static struct omap_hwmod dm814x_mmc1_hwmod = { + .name = "mmc1", + .clkdm_name = "alwon_l3s_clkdm", + .opt_clks = dm81xx_mmc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks), + .main_clk = "sysclk8_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM814X_CM_ALWON_MMCHS_0_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mmc_dev_attr, + .class = &dm81xx_mmc_class, +}; + +static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc1 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm814x_mmc1_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, + .flags = OMAP_FIREWALL_L4 +}; + +static struct omap_hwmod dm814x_mmc2_hwmod = { + .name = "mmc2", + .clkdm_name = "alwon_l3s_clkdm", + .opt_clks = dm81xx_mmc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks), + .main_clk = "sysclk8_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM814X_CM_ALWON_MMCHS_1_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mmc_dev_attr, + .class = &dm81xx_mmc_class, +}; + +static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc2 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm814x_mmc2_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, + .flags = OMAP_FIREWALL_L4 +}; + +static struct omap_hwmod dm814x_mmc3_hwmod = { + .name = "mmc3", + .clkdm_name = "alwon_l3_med_clkdm", + .opt_clks = dm81xx_mmc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks), + .main_clk = "sysclk8_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM814X_CM_ALWON_MMCHS_2_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mmc_dev_attr, + .class = &dm81xx_mmc_class, +}; + +static struct omap_hwmod_ocp_if dm814x_alwon_l3_med__mmc3 = { + .master = &dm81xx_alwon_l3_med_hwmod, + .slave = &dm814x_mmc3_hwmod, + .clk = "sysclk4_ck", + .user = OCP_USER_MPU, }; static struct omap_hwmod dm816x_mmc1_hwmod = { .name = "mmc1", .clkdm_name = "alwon_l3s_clkdm", - .opt_clks = dm816x_mmc1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dm816x_mmc1_opt_clks), + .opt_clks = dm81xx_mmc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks), .main_clk = "sysclk10_ck", .prcm = { .omap4 = { @@ -948,8 +1038,8 @@ static struct omap_hwmod dm816x_mmc1_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &mmc1_dev_attr, - .class = &dm816x_mmc_class, + .dev_attr = &mmc_dev_attr, + .class = &dm81xx_mmc_class, }; static struct omap_hwmod_ocp_if dm816x_l4_ls__mmc1 = { @@ -1036,6 +1126,40 @@ static struct omap_hwmod_ocp_if dm81xx_l4_ls__mailbox = { .user = OCP_USER_MPU, }; +static struct omap_hwmod_class_sysconfig dm81xx_spinbox_sysc = { + .rev_offs = 0x000, + .sysc_offs = 0x010, + .syss_offs = 0x014, + .sysc_flags = SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class dm81xx_spinbox_hwmod_class = { + .name = "spinbox", + .sysc = &dm81xx_spinbox_sysc, +}; + +static struct omap_hwmod dm81xx_spinbox_hwmod = { + .name = "spinbox", + .clkdm_name = "alwon_l3s_clkdm", + .class = &dm81xx_spinbox_hwmod_class, + .main_clk = "sysclk6_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_ALWON_SPINBOX_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_spinbox_hwmod, + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_class dm81xx_tpcc_hwmod_class = { .name = "tpcc", }; @@ -1230,11 +1354,7 @@ static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = { /* * REVISIT: Test and enable the following once clocks work: - * dm81xx_l4_ls__gpio1 - * dm81xx_l4_ls__gpio2 * dm81xx_l4_ls__mailbox - * dm81xx_alwon_l3_slow__gpmc - * dm81xx_default_l3_slow__usbss * * Also note that some devices share a single clkctrl_offs.. * For example, i2c1 and 3 share one, and i2c2 and 4 share one. @@ -1250,8 +1370,12 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { &dm81xx_l4_ls__wd_timer1, &dm81xx_l4_ls__i2c1, &dm81xx_l4_ls__i2c2, + &dm81xx_l4_ls__gpio1, + &dm81xx_l4_ls__gpio2, &dm81xx_l4_ls__elm, &dm81xx_l4_ls__mcspi1, + &dm814x_l4_ls__mmc1, + &dm814x_l4_ls__mmc2, &dm81xx_alwon_l3_fast__tpcc, &dm81xx_alwon_l3_fast__tptc0, &dm81xx_alwon_l3_fast__tptc1, @@ -1265,6 +1389,9 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { &dm814x_l4_ls__timer2, &dm814x_l4_hs__cpgmac0, &dm814x_cpgmac0__mdio, + &dm81xx_alwon_l3_slow__gpmc, + &dm814x_default_l3_slow__usbss, + &dm814x_alwon_l3_med__mmc3, NULL, }; @@ -1298,6 +1425,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm816x_l4_ls__timer7, &dm81xx_l4_ls__mcspi1, &dm81xx_l4_ls__mailbox, + &dm81xx_l4_ls__spinbox, &dm81xx_l4_hs__emac0, &dm81xx_emac0__mdio, &dm816x_l4_hs__emac1, @@ -1311,7 +1439,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm81xx_tptc2__alwon_l3_fast, &dm81xx_tptc3__alwon_l3_fast, &dm81xx_alwon_l3_slow__gpmc, - &dm81xx_default_l3_slow__usbss, + &dm816x_default_l3_slow__usbss, NULL, }; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 58144779d..a935d2844 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -23,6 +23,8 @@ #include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> #include <linux/platform_data/wkup_m3.h> +#include <linux/platform_data/pwm_omap_dmtimer.h> +#include <plat/dmtimer.h> #include "common.h" #include "common-board-devices.h" @@ -150,6 +152,21 @@ static struct platform_device wl18xx_device = { } }; +static struct ti_st_plat_data wilink7_pdata = { + .nshutdown_gpio = 162, + .dev_name = "/dev/ttyO1", + .flow_cntrl = 1, + .baud_rate = 300000, +}; + +static struct platform_device wl128x_device = { + .name = "kim", + .id = -1, + .dev = { + .platform_data = &wilink7_pdata, + } +}; + static struct platform_device btwilink_device = { .name = "btwilink", .id = -1, @@ -265,7 +282,7 @@ static void __init nokia_n900_legacy_init(void) pr_warn("Thumb binaries may crash randomly without this workaround\n"); } - pr_info("RX-51: Registring OMAP3 HWRNG device\n"); + pr_info("RX-51: Registering OMAP3 HWRNG device\n"); platform_device_register(&omap3_rom_rng_device); } @@ -276,6 +293,13 @@ static void __init omap3_tao3530_legacy_init(void) hsmmc2_internal_input_clk(); } +static void __init omap3_logicpd_torpedo_init(void) +{ + omap3_gpio126_127_129(); + platform_device_register(&wl128x_device); + platform_device_register(&btwilink_device); +} + /* omap3pandora legacy devices */ #define PANDORA_WIFI_IRQ_GPIO 21 #define PANDORA_WIFI_NRESET_GPIO 23 @@ -427,6 +451,24 @@ void omap_auxdata_legacy_init(struct device *dev) dev->platform_data = &twl_gpio_auxdata; } +/* Dual mode timer PWM callbacks platdata */ +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) +struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = { + .request_by_node = omap_dm_timer_request_by_node, + .free = omap_dm_timer_free, + .enable = omap_dm_timer_enable, + .disable = omap_dm_timer_disable, + .get_fclk = omap_dm_timer_get_fclk, + .start = omap_dm_timer_start, + .stop = omap_dm_timer_stop, + .set_load = omap_dm_timer_set_load, + .set_match = omap_dm_timer_set_match, + .set_pwm = omap_dm_timer_set_pwm, + .set_prescaler = omap_dm_timer_set_prescaler, + .write_counter = omap_dm_timer_write_counter, +}; +#endif + /* * Few boards still need auxdata populated before we populate * the dev entries in of_platform_populate(). @@ -480,6 +522,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", &wkup_m3_data), #endif +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) + OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata), +#endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", &omap4_iommu_pdata), @@ -503,7 +548,7 @@ static struct pdata_init pdata_quirks[] __initdata = { { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, }, { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, }, - { "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, }, + { "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, }, { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 2e00c7f1f..eb27ae066 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -384,14 +384,14 @@ static struct powerdomain isp_814x_pwrdm = { .voltdm = { .name = "core" }, }; -static struct powerdomain active_816x_pwrdm = { +static struct powerdomain active_81xx_pwrdm = { .name = "active_pwrdm", .prcm_offs = TI816X_PRM_ACTIVE_MOD, .pwrsts = PWRSTS_OFF_ON, .voltdm = { .name = "core" }, }; -static struct powerdomain default_816x_pwrdm = { +static struct powerdomain default_81xx_pwrdm = { .name = "default_pwrdm", .prcm_offs = TI81XX_PRM_DEFAULT_MOD, .pwrsts = PWRSTS_OFF_ON, @@ -486,6 +486,8 @@ static struct powerdomain *powerdomains_am35x[] __initdata = { static struct powerdomain *powerdomains_ti814x[] __initdata = { &alwon_81xx_pwrdm, &device_81xx_pwrdm, + &active_81xx_pwrdm, + &default_81xx_pwrdm, &gem_814x_pwrdm, &ivahd_814x_pwrdm, &hdvpss_814x_pwrdm, @@ -497,8 +499,8 @@ static struct powerdomain *powerdomains_ti814x[] __initdata = { static struct powerdomain *powerdomains_ti816x[] __initdata = { &alwon_81xx_pwrdm, &device_81xx_pwrdm, - &active_816x_pwrdm, - &default_816x_pwrdm, + &active_81xx_pwrdm, + &default_81xx_pwrdm, &ivahd0_816x_pwrdm, &ivahd1_816x_pwrdm, &ivahd2_816x_pwrdm, diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 3fc2cbe52..5b2f5138d 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -664,6 +664,13 @@ static struct omap_prcm_init_data am3_prm_data __initdata = { }; #endif +#ifdef CONFIG_SOC_TI81XX +static struct omap_prcm_init_data dm814_pllss_data __initdata = { + .index = TI_CLKM_PLLSS, + .init = am33xx_prm_init, +}; +#endif + #ifdef CONFIG_ARCH_OMAP4 static struct omap_prcm_init_data omap4_prm_data __initdata = { .index = TI_CLKM_PRM, @@ -715,6 +722,7 @@ static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = #endif #ifdef CONFIG_SOC_TI81XX { .compatible = "ti,dm814-prcm", .data = &am3_prm_data }, + { .compatible = "ti,dm814-pllss", .data = &dm814_pllss_data }, { .compatible = "ti,dm816-prcm", .data = &am3_prm_data }, #endif #ifdef CONFIG_ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 5fb50fe54..f164c6b32 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -213,7 +213,7 @@ static int __init omap_serial_early_init(void) return 0; } -omap_core_initcall(omap_serial_early_init); +omap_postcore_initcall(omap_serial_early_init); /** * omap_serial_init_port() - initialize single serial port diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index f86692dbc..5b385bb8a 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -194,8 +194,8 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id * /** * omap_dmtimer_init - initialisation function when device tree is used * - * For secure OMAP3 devices, timers with device type "timer-secure" cannot - * be used by the kernel as they are reserved. Therefore, to prevent the + * For secure OMAP3/DRA7xx devices, timers with device type "timer-secure" + * cannot be used by the kernel as they are reserved. Therefore, to prevent the * kernel registering these devices remove them dynamically from the device * tree on boot. */ @@ -203,7 +203,7 @@ static void __init omap_dmtimer_init(void) { struct device_node *np; - if (!cpu_is_omap34xx()) + if (!cpu_is_omap34xx() && !soc_is_dra7xx()) return; /* If we are a secure device, remove any secure timer nodes */ diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 66f1c952c..a9ad95f00 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -1,6 +1,18 @@ -if ARCH_ORION5X +menuconfig ARCH_ORION5X + bool "Marvell Orion" + depends on MMU && ARCH_MULTI_V5 + select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON + select GENERIC_CLOCKEVENTS + select MVEBU_MBUS + select PCI + select PLAT_ORION_LEGACY + help + Support for the following Marvell Orion 5x series SoCs: + Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), + Orion-2 (5281), Orion-1-90 (6183). -menu "Orion Implementations" +if ARCH_ORION5X config ARCH_ORION5X_DT bool "Marvell Orion5x Flattened Device Tree" @@ -163,6 +175,4 @@ config MACH_RD88F6183AP_GE Say 'Y' here if you want your kernel to support the Marvell Orion-1-90 (88F6183) AP GE RD. -endmenu - endif diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index a1e0fbe6a..4b2502b4c 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -1,3 +1,5 @@ +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include + obj-y += common.o pci.o irq.o mpp.o obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c index 8a7284124..a89376a5c 100644 --- a/arch/arm/mach-orion5x/board-d2net.c +++ b/arch/arm/mach-orion5x/board-d2net.c @@ -20,9 +20,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> #include <plat/orion-gpio.h> #include "common.h" +#include "orion5x.h" /***************************************************************************** * LaCie d2 Network Info diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index d0871786d..6f4c2c4ae 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -20,10 +20,10 @@ #include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/orion5x.h> -#include <mach/bridge-regs.h> #include <plat/irq.h> #include <plat/time.h> +#include "orion5x.h" +#include "bridge-regs.h" #include "common.h" static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = { diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c index 66f9c3ba8..79202fd62 100644 --- a/arch/arm/mach-orion5x/board-mss2.c +++ b/arch/arm/mach-orion5x/board-mss2.c @@ -17,8 +17,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include <mach/bridge-regs.h> +#include "orion5x.h" +#include "bridge-regs.h" #include "common.h" /***************************************************************************** diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c index 270824b0e..b7b0f52f4 100644 --- a/arch/arm/mach-orion5x/board-rd88f5182.c +++ b/arch/arm/mach-orion5x/board-rd88f5182.c @@ -18,8 +18,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> #include "common.h" +#include "orion5x.h" /***************************************************************************** * RD-88F5182 Info diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/bridge-regs.h index 5766e3fbf..305598eaa 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/bridge-regs.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-orion5x/include/mach/bridge-regs.h - * * Orion CPU Bridge Registers * * This file is licensed under the terms of the GNU General Public @@ -11,7 +9,7 @@ #ifndef __ASM_ARCH_BRIDGE_REGS_H #define __ASM_ARCH_BRIDGE_REGS_H -#include <mach/orion5x.h> +#include "orion5x.h" #define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE + 0x100) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 6bbb7b55c..70c3366c8 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -27,14 +27,14 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/bridge-regs.h> -#include <mach/hardware.h> -#include <mach/orion5x.h> #include <linux/platform_data/mtd-orion_nand.h> #include <linux/platform_data/usb-ehci-orion.h> #include <plat/time.h> #include <plat/common.h> + +#include "bridge-regs.h" #include "common.h" +#include "orion5x.h" /***************************************************************************** * I/O Address Mapping @@ -184,9 +184,21 @@ static void __init orion5x_crypto_init(void) /***************************************************************************** * Watchdog ****************************************************************************/ +static struct resource orion_wdt_resource[] = { + DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04), + DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04), +}; + +static struct platform_device orion_wdt_device = { + .name = "orion_wdt", + .id = -1, + .num_resources = ARRAY_SIZE(orion_wdt_resource), + .resource = orion_wdt_resource, +}; + static void __init orion5x_wdt_init(void) { - orion_wdt_init(); + platform_device_register(&orion_wdt_device); } diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index dc01c4ffc..12f74b46e 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -23,10 +23,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> #include <linux/platform_data/mtd-orion_nand.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" /***************************************************************************** * DB-88F5281 on board devices @@ -369,6 +369,7 @@ static void __init db88f5281_init(void) MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = db88f5281_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index bc279a853..cd483bfb5 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -33,8 +33,8 @@ #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <asm/system_info.h> -#include <mach/orion5x.h> #include <plat/orion-gpio.h> +#include "orion5x.h" #include "common.h" #include "mpp.h" @@ -666,6 +666,7 @@ static void __init dns323_init(void) MACHINE_START(DNS323, "D-Link DNS-323") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = dns323_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S deleted file mode 100644 index 73919a36b..000000000 --- a/arch/arm/mach-orion5x/include/mach/entry-macro.S +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Orion platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <mach/bridge-regs.h> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =MAIN_IRQ_CAUSE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #0] @ main cause - ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask - mov \irqnr, #0 @ default irqnr - @ find cause bits that are unmasked - ands \irqstat, \irqstat, \tmp @ clear Z flag if any - clzne \irqnr, \irqstat @ calc irqnr - rsbne \irqnr, \irqnr, #32 - .endm diff --git a/arch/arm/mach-orion5x/include/mach/hardware.h b/arch/arm/mach-orion5x/include/mach/hardware.h deleted file mode 100644 index 395735482..000000000 --- a/arch/arm/mach-orion5x/include/mach/hardware.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "orion5x.h" - -#endif diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h deleted file mode 100644 index abd26b542..000000000 --- a/arch/arm/mach-orion5x/include/mach/uncompress.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/uncompress.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/serial_reg.h> -#include <mach/orion5x.h> - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index 086ecb87d..de980ef9c 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -13,10 +13,10 @@ #include <linux/kernel.h> #include <linux/irq.h> #include <linux/io.h> -#include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> #include <asm/exception.h> +#include "bridge-regs.h" #include "common.h" static int __initdata gpio0_irqs[4] = { @@ -26,14 +26,6 @@ static int __initdata gpio0_irqs[4] = { IRQ_ORION5X_GPIO_24_31, }; -#ifdef CONFIG_MULTI_IRQ_HANDLER -/* - * Compiling with both non-DT and DT support enabled, will - * break asm irq handler used by non-DT boards. Therefore, - * we provide a C-style irq handler even for non-DT boards, - * if MULTI_IRQ_HANDLER is set. - */ - asmlinkage void __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs) { @@ -47,15 +39,12 @@ __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs) return; } } -#endif void __init orion5x_init_irq(void) { orion_irq_init(1, MAIN_IRQ_MASK); -#ifdef CONFIG_MULTI_IRQ_HANDLER set_handle_irq(orion5x_legacy_handle_irq); -#endif /* * Initialize gpiolib for GPIOs 0-31. diff --git a/arch/arm/mach-orion5x/include/mach/irqs.h b/arch/arm/mach-orion5x/irqs.h index 2431d9923..506c8e0b3 100644 --- a/arch/arm/mach-orion5x/include/mach/irqs.h +++ b/arch/arm/mach-orion5x/irqs.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-orion5x/include/mach/irqs.h - * * IRQ definitions for Orion SoC * * Maintainer: Tzachi Perelstein <tzachi@marvell.com> @@ -54,7 +52,7 @@ #define IRQ_ORION5X_GPIO_START 33 #define NR_GPIO_IRQS 32 -#define NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS) +#define ORION5X_NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS) #endif diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index fe6a48a32..9dc3f59be 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -23,10 +23,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> #include <linux/platform_data/mtd-orion_nand.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" /***************************************************************************** * KUROBOX-PRO Info @@ -383,6 +383,7 @@ static void __init kurobox_pro_init(void) MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, @@ -397,6 +398,7 @@ MACHINE_END MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 028ea038d..dfdaa8a49 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -22,9 +22,9 @@ #include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/orion5x.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" /***************************************************************************** * Linkstation LS-CHL Info @@ -320,6 +320,7 @@ static void __init lschl_init(void) MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)") /* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = lschl_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index 32b7129b7..47ba6e050 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -21,9 +21,9 @@ #include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/orion5x.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" /***************************************************************************** * Linkstation LS-HGL Info @@ -267,6 +267,7 @@ static void __init ls_hgl_init(void) MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL") /* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = ls_hgl_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index 5b70026f4..19ef18594 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -11,8 +11,8 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <mach/hardware.h> #include <plat/mpp.h> +#include "orion5x.h" #include "mpp.h" #include "common.h" diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index e032f01da..2bf8ec75e 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -21,9 +21,9 @@ #include <linux/ata_platform.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/orion5x.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" #define MV2120_NOR_BOOT_BASE 0xf4000000 #define MV2120_NOR_BOOT_SIZE SZ_512K @@ -232,6 +232,7 @@ static void __init mv2120_init(void) MACHINE_START(MV2120, "HP Media Vault mv2120") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = mv2120_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index ba73dc7ff..bf6be4cfd 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -24,10 +24,10 @@ #include <linux/delay.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/orion5x.h> #include <plat/orion-gpio.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" /***************************************************************************** * LaCie 2Big Network Info @@ -423,6 +423,7 @@ static void __init net2big_init(void) /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ MACHINE_START(NET2BIG, "LaCie 2Big Network") .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = net2big_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/orion5x.h index b78ff3248..3364df331 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/orion5x.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-orion5x/include/mach/orion5x.h - * * Generic definitions of Orion SoC flavors: * Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90. * @@ -14,6 +12,8 @@ #ifndef __ASM_ARCH_ORION5X_H #define __ASM_ARCH_ORION5X_H +#include "irqs.h" + /***************************************************************************** * Orion Address Maps * diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index b02f3947b..ecb998e7f 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -19,8 +19,8 @@ #include <asm/mach/pci.h> #include <plat/pcie.h> #include <plat/addr-map.h> -#include <mach/orion5x.h> #include "common.h" +#include "orion5x.h" /***************************************************************************** * Orion has one PCIe controller and one PCI controller. diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 213b3e143..c742e7b40 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -20,9 +20,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" /***************************************************************************** * RD-88F5181L FXO Info @@ -169,6 +169,7 @@ subsys_initcall(rd88f5181l_fxo_pci_init); MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design") /* Maintainer: Nicolas Pitre <nico@marvell.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = rd88f5181l_fxo_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index 594800e1d..7e977b794 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -21,9 +21,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" /***************************************************************************** * RD-88F5181L GE Info @@ -181,6 +181,7 @@ subsys_initcall(rd88f5181l_ge_pci_init); MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = rd88f5181l_ge_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index b576ef5f1..fe3e67c81 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -23,9 +23,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" /***************************************************************************** * RD-88F5182 Info @@ -281,6 +281,7 @@ static void __init rd88f5182_init(void) MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = rd88f5182_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index 78a1e6ab1..4bf80dd54 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -22,8 +22,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> #include "common.h" +#include "orion5x.h" static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = { .phy_addr = -1, @@ -119,6 +119,7 @@ subsys_initcall(rd88f6183ap_ge_pci_init); MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = rd88f6183ap_ge_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 12086745c..deb5e29ac 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -22,9 +22,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" /***************************************************************************** * Terastation Pro 2/Live Info @@ -359,6 +359,7 @@ static void __init tsp2_init(void) MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live") /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = tsp2_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index c725b7cb9..7bd671b28 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -25,9 +25,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" #include "tsx09-common.h" #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 @@ -324,6 +324,7 @@ static void __init qnap_ts209_init(void) MACHINE_START(TS209, "QNAP TS-109/TS-209") /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = qnap_ts209_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index cf2ab531c..a77613b14 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -27,9 +27,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" #include "tsx09-common.h" /***************************************************************************** @@ -313,6 +313,7 @@ static void __init qnap_ts409_init(void) MACHINE_START(TS409, "QNAP TS-409") /* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = qnap_ts409_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 1b704d35c..3a58a5d4a 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -23,9 +23,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/orion5x.h> #include "common.h" #include "mpp.h" +#include "orion5x.h" #include "ts78xx-fpga.h" /***************************************************************************** @@ -176,7 +176,7 @@ static void ts78xx_ts_rtc_unload(void) static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); if (ctrl & NAND_CTRL_CHANGE) { unsigned char bits; @@ -200,7 +200,7 @@ static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd) static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); void __iomem *io_base = chip->IO_ADDR_W; unsigned long off = ((unsigned long)buf & 3); int sz; @@ -227,7 +227,7 @@ static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd, static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); void __iomem *io_base = chip->IO_ADDR_R; unsigned long off = ((unsigned long)buf & 3); int sz; @@ -615,6 +615,7 @@ static void __init ts78xx_init(void) MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") /* Maintainer: Alexander Clouter <alex@digriz.org.uk> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = ts78xx_init, .map_io = ts78xx_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c index d42e00659..89774985d 100644 --- a/arch/arm/mach-orion5x/tsx09-common.c +++ b/arch/arm/mach-orion5x/tsx09-common.c @@ -15,7 +15,7 @@ #include <linux/mv643xx_eth.h> #include <linux/timex.h> #include <linux/serial_reg.h> -#include <mach/orion5x.h> +#include "orion5x.h" #include "tsx09-common.h" #include "common.h" diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 80a56ee24..4e1e5c8f6 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -19,7 +19,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> +#include "orion5x.h" #include "common.h" #include "mpp.h" @@ -174,6 +174,7 @@ subsys_initcall(wnr854t_pci_init); MACHINE_START(WNR854T, "Netgear WNR854T") /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = wnr854t_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 670e30dc0..61e9027ef 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -22,7 +22,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <mach/orion5x.h> +#include "orion5x.h" #include "common.h" #include "mpp.h" @@ -262,6 +262,7 @@ subsys_initcall(wrt350n_v2_pci_init); MACHINE_START(WRT350N_V2, "Linksys WRT350N v2") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ .atag_offset = 0x100, + .nr_irqs = ORION5X_NR_IRQS, .init_machine = wrt350n_v2_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig index 62240f69b..aef92ba0e 100644 --- a/arch/arm/mach-picoxcell/Kconfig +++ b/arch/arm/mach-picoxcell/Kconfig @@ -1,5 +1,6 @@ config ARCH_PICOXCELL - bool "Picochip PicoXcell" if ARCH_MULTI_V6 + bool "Picochip PicoXcell" + depends on ARCH_MULTI_V6 select ARCH_REQUIRE_GPIOLIB select ARM_VIC select DW_APB_TIMER_OF diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 9ab893240..f998eb1c6 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_SIRF - bool "CSR SiRF" if ARCH_MULTI_V7 + bool "CSR SiRF" + depends on ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB select GENERIC_IRQ_CHIP diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h index 3916a6665..6d77b622d 100644 --- a/arch/arm/mach-prima2/common.h +++ b/arch/arm/mach-prima2/common.h @@ -15,7 +15,7 @@ #include <asm/mach/time.h> #include <asm/exception.h> -extern struct smp_operations sirfsoc_smp_ops; +extern const struct smp_operations sirfsoc_smp_ops; extern void sirfsoc_secondary_startup(void); extern void sirfsoc_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index e46c91094..0875b99ad 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -112,7 +112,7 @@ static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) return pen_release != -1 ? -ENOSYS : 0; } -struct smp_operations sirfsoc_smp_ops __initdata = { +const struct smp_operations sirfsoc_smp_ops __initconst = { .smp_secondary_init = sirfsoc_secondary_init, .smp_boot_secondary = sirfsoc_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c index 12fb0f4ae..50e18ed37 100644 --- a/arch/arm/mach-pxa/am200epd.c +++ b/arch/arm/mach-pxa/am200epd.c @@ -30,8 +30,8 @@ #include <linux/irq.h> #include <linux/gpio.h> -#include <mach/pxa25x.h> -#include <mach/gumstix.h> +#include "pxa25x.h" +#include "gumstix.h" #include <linux/platform_data/video-pxafb.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index 8b90c4f2d..17d08abee 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -28,8 +28,8 @@ #include <linux/irq.h> #include <linux/gpio.h> -#include <mach/gumstix.h> -#include <mach/mfp-pxa25x.h> +#include "gumstix.h" +#include "mfp-pxa25x.h" #include <mach/irqs.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index a727282bf..8a3c40929 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -42,13 +42,13 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/balloon3.h> #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> -#include <mach/udc.h> -#include <mach/pxa27x-udc.h> +#include "udc.h" +#include "pxa27x-udc.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> @@ -572,7 +572,7 @@ static inline void balloon3_i2c_init(void) {} #if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE) static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0; if (ctrl & NAND_CTRL_CHANGE) { diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index bf366b39f..1c3cbfca9 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -29,8 +29,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa320.h> -#include <mach/mxm8x10.h> +#include "pxa320.h" +#include "mxm8x10.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c index be751470d..b592f79a1 100644 --- a/arch/arm/mach-pxa/cm-x255.c +++ b/arch/arm/mach-pxa/cm-x255.c @@ -22,7 +22,7 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 2503db9e3..fa5f51d63 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -21,7 +21,7 @@ #include <linux/spi/pxa2xx_spi.h> #include <linux/spi/libertas_spi.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index a17a91eb8..7202022ee 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -22,9 +22,18 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #undef GPIO24_SSP1_SFRM -#include <mach/pxa27x.h> +#undef GPIO86_GPIO +#undef GPIO87_GPIO +#undef GPIO88_GPIO +#undef GPIO89_GPIO +#include "pxa27x.h" +#undef GPIO24_SSP1_SFRM +#undef GPIO86_GPIO +#undef GPIO87_GPIO +#undef GPIO88_GPIO +#undef GPIO89_GPIO #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> #include <mach/smemc.h> diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index a7dae6081..5f5ac7c8f 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -47,8 +47,8 @@ #include <asm/setup.h> #include <asm/system_info.h> -#include <mach/pxa300.h> -#include <mach/pxa27x-udc.h> +#include "pxa300.h" +#include "pxa27x-udc.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 638b0bb88..dc44fbbe5 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -22,11 +22,11 @@ #include <linux/i2c/pxa-i2c.h> #include <asm/io.h> -#include <mach/pxa27x.h> -#include <mach/colibri.h> +#include "pxa27x.h" +#include "colibri.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/pxa27x-udc.h> +#include "pxa27x-udc.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index db20d25da..8cff770e6 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -30,8 +30,8 @@ #include <mach/hardware.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/pxa27x.h> -#include <mach/pxa27x-udc.h> +#include "pxa27x.h" +#include "pxa27x-udc.h" #include <linux/platform_data/video-pxafb.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 350382633..e68acdd0c 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -27,8 +27,8 @@ #include <asm/sizes.h> #include <mach/audio.h> -#include <mach/colibri.h> -#include <mach/pxa27x.h> +#include "colibri.h" +#include "pxa27x.h" #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index f1a1ac1fb..6a5558d95 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -22,8 +22,8 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> -#include <mach/pxa300.h> -#include <mach/colibri.h> +#include "pxa300.h" +#include "colibri.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/video-pxafb.h> #include <mach/audio.h> diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index f6cc8b0ab..17067a303 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -23,13 +23,13 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> -#include <mach/pxa320.h> -#include <mach/colibri.h> +#include "pxa320.h" +#include "colibri.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <mach/audio.h> -#include <mach/pxa27x-udc.h> -#include <mach/udc.h> +#include "pxa27x-udc.h" +#include "udc.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 8240291ab..b04431bb4 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -22,8 +22,8 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa300.h> -#include <mach/colibri.h> +#include "mfp-pxa300.h" +#include "colibri.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/colibri.h index cb4236e98..cb4236e98 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/colibri.h diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 89f790dda..dc109dc3a 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -48,12 +48,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> -#include <mach/udc.h> +#include "udc.h" #include <mach/corgi.h> -#include <mach/sharpsl_pm.h> +#include "sharpsl_pm.h" #include <asm/mach/sharpsl_param.h> #include <asm/hardware/scoop.h> diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 7a39efc50..d9206811b 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -27,7 +27,7 @@ #include <mach/corgi.h> #include <mach/pxa2xx-regs.h> -#include <mach/sharpsl_pm.h> +#include "sharpsl_pm.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index fadfff8fe..bf19b8426 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -21,8 +21,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/csb726.h> -#include <mach/pxa27x.h> +#include "csb726.h" +#include "pxa27x.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <mach/audio.h> diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/csb726.h index 00cfbbbf7..f1f2a78cf 100644 --- a/arch/arm/mach-pxa/include/mach/csb726.h +++ b/arch/arm/mach-pxa/csb726.h @@ -11,7 +11,7 @@ #ifndef CSB726_H #define CSB726_H -#include "irqs.h" /* PXA_GPIO_TO_IRQ */ +#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ #define CSB726_GPIO_IRQ_LAN 52 #define CSB726_GPIO_IRQ_SM501 53 diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 2a6e0ae2b..37d8d8566 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -6,7 +6,7 @@ #include <linux/spi/pxa2xx_spi.h> #include <linux/i2c/pxa-i2c.h> -#include <mach/udc.h> +#include "udc.h" #include <linux/platform_data/usb-pxa3xx-ulpi.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> @@ -14,7 +14,7 @@ #include <mach/irqs.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <linux/platform_data/camera-pxa.h> +#include <linux/platform_data/media/camera-pxa.h> #include <mach/audio.h> #include <mach/hardware.h> #include <linux/platform_data/mmp_dma.h> diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 9d7072b04..6e0268dee 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -39,14 +39,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa27x.h> -#include <mach/pxa27x-udc.h> +#include "pxa27x.h" +#include "pxa27x-udc.h" #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <linux/platform_data/camera-pxa.h> +#include <linux/platform_data/media/camera-pxa.h> #include "generic.h" #include "devices.h" @@ -289,7 +289,7 @@ static void nand_cs_off(void) static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat, unsigned int ctrl) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; dsb(); diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/eseries-irq.h index de292b269..de292b269 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-irq.h +++ b/arch/arm/mach-pxa/eseries-irq.h diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 16dc95f68..0b00b226f 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -31,12 +31,12 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include <mach/eseries-gpio.h> -#include <mach/eseries-irq.h> +#include "eseries-irq.h" #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> -#include <mach/udc.h> +#include "udc.h" #include <linux/platform_data/irda-pxaficp.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 7c0d5618b..34ad0a89d 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -29,12 +29,12 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <mach/hardware.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <linux/platform_data/camera-pxa.h> +#include <linux/platform_data/media/camera-pxa.h> #include "devices.h" #include "generic.h" @@ -50,7 +50,7 @@ #define GPIO19_GEN1_CAM_RST 19 #define GPIO28_GEN2_CAM_RST 28 -static struct pwm_lookup ezx_pwm_lookup[] = { +static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = { PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700, PWM_POLARITY_NORMAL), }; @@ -83,7 +83,7 @@ static struct pxafb_mode_info mode_ezx_old = { .sync = 0, }; -static struct pxafb_mach_info ezx_fb_info_1 = { +static struct pxafb_mach_info ezx_fb_info_1 __maybe_unused = { .modes = &mode_ezx_old, .num_modes = 1, .lcd_conn = LCD_COLOR_TFT_16BPP, @@ -104,17 +104,17 @@ static struct pxafb_mode_info mode_72r89803y01 = { .sync = 0, }; -static struct pxafb_mach_info ezx_fb_info_2 = { +static struct pxafb_mach_info ezx_fb_info_2 __maybe_unused = { .modes = &mode_72r89803y01, .num_modes = 1, .lcd_conn = LCD_COLOR_TFT_18BPP, }; -static struct platform_device *ezx_devices[] __initdata = { +static struct platform_device *ezx_devices[] __initdata __maybe_unused = { &ezx_backlight_device, }; -static unsigned long ezx_pin_config[] __initdata = { +static unsigned long ezx_pin_config[] __initdata __maybe_unused = { /* PWM backlight */ GPIO16_PWM0_OUT, diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index f6c76a3ee..6815a9357 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -40,10 +40,10 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include <linux/platform_data/mmc-pxamci.h> -#include <mach/udc.h> -#include <mach/gumstix.h> +#include "udc.h" +#include "gumstix.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/gumstix.h index f7df27bbb..825f2d126 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/gumstix.h @@ -6,7 +6,7 @@ * published by the Free Software Foundation. */ -#include "irqs.h" /* PXA_GPIO_TO_IRQ */ +#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ /* BTRESET - Reset line to Bluetooth module, active low signal. */ #define GPIO_GUMSTIX_BTRESET 7 diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index 875ec3351..be2a9c3fd 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -30,9 +30,9 @@ #include <asm/mach/map.h> #include <asm/irq.h> -#include <mach/pxa25x.h> -#include <mach/h5000.h> -#include <mach/udc.h> +#include "pxa25x.h" +#include "h5000.h" +#include "udc.h" #include <mach/smemc.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/include/mach/h5000.h b/arch/arm/mach-pxa/h5000.h index 2a5ae3802..252461fd2 100644 --- a/arch/arm/mach-pxa/include/mach/h5000.h +++ b/arch/arm/mach-pxa/h5000.h @@ -18,7 +18,7 @@ #ifndef __ASM_ARCH_H5000_H #define __ASM_ARCH_H5000_H -#include <mach/mfp-pxa25x.h> +#include "mfp-pxa25x.h" /* * CPU GPIOs diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index 7a8d749a0..70e9c0659 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -24,7 +24,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index b076a835e..4a2f9aba9 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -44,7 +44,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/hx4700.h> #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index a1869f9b6..cbaf4f6ed 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -20,8 +20,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa320.h> -#include <mach/mxm8x10.h> +#include "pxa320.h" +#include "mxm8x10.h" #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index f6d02e4cb..c410d84b2 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -31,8 +31,8 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa25x.h> -#include <mach/idp.h> +#include "pxa25x.h" +#include "idp.h" #include <linux/platform_data/video-pxafb.h> #include <mach/bitfield.h> #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/idp.h index 7e63f4680..7182ff92b 100644 --- a/arch/arm/mach-pxa/include/mach/idp.h +++ b/arch/arm/mach-pxa/idp.h @@ -23,7 +23,7 @@ * IDP hardware. */ -#include "irqs.h" /* PXA_GPIO_TO_IRQ */ +#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ #define IDP_FLASH_PHYS (PXA_CS0_PHYS) #define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 5d665588c..051c55477 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -41,11 +41,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/pxa300.h> +#include "pxa300.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <mach/littleton.h> +#include "littleton.h" #include <linux/platform_data/mtd-nand-pxa3xx.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/littleton.h index 8066be54e..8066be54e 100644 --- a/arch/arm/mach-pxa/include/mach/littleton.h +++ b/arch/arm/mach-pxa/littleton.h diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 5fcd4f094..e9f401b0a 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -40,8 +40,8 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa27x.h> -#include <mach/lpd270.h> +#include "pxa27x.h" +#include "lpd270.h" #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/lpd270.h index 4edc712a2..4edc712a2 100644 --- a/arch/arm/mach-pxa/include/mach/lpd270.h +++ b/arch/arm/mach-pxa/lpd270.h diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 6de32fa0e..7245f3359 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -47,14 +47,14 @@ #include <asm/hardware/sa1111.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include <mach/audio.h> #include <mach/lubbock.h> -#include <mach/udc.h> +#include "udc.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> -#include <mach/pm.h> +#include "pm.h" #include <mach/smemc.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 896b268c3..abc918169 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -38,7 +38,7 @@ #include <asm/mach/arch.h> #include <asm/system_info.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/magician.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> @@ -48,9 +48,9 @@ #include <linux/regulator/max1586.h> #include <linux/platform_data/pxa2xx_udc.h> -#include <mach/udc.h> -#include <mach/pxa27x-udc.h> +#include "udc.h" +#include "pxa27x-udc.h" #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index c3a87c176..40964069a 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -46,7 +46,7 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/mainstone.h> #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/mfp-pxa25x.h index cafadc33d..1c59d4b3b 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h +++ b/arch/arm/mach-pxa/mfp-pxa25x.h @@ -1,7 +1,7 @@ #ifndef __ASM_ARCH_MFP_PXA25X_H #define __ASM_ARCH_MFP_PXA25X_H -#include <mach/mfp-pxa2xx.h> +#include "mfp-pxa2xx.h" /* GPIO */ #define GPIO2_GPIO MFP_CFG_IN(GPIO2, AF0) diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/mfp-pxa27x.h index b6132aa95..9fe5601ce 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/mfp-pxa27x.h @@ -8,7 +8,7 @@ * specific controller, and this should work in most cases. */ -#include <mach/mfp-pxa2xx.h> +#include "mfp-pxa2xx.h" /* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN * bit is set, regardless of the GPIO configuration diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 666b78972..3732aec76 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -21,7 +21,7 @@ #include <linux/syscore_ops.h> #include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa2xx.h> +#include "mfp-pxa2xx.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/mfp-pxa2xx.h index cbf51ae81..cbf51ae81 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/mfp-pxa2xx.h diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/mfp-pxa300.h index 4e1287070..5ee51e283 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h +++ b/arch/arm/mach-pxa/mfp-pxa300.h @@ -15,7 +15,7 @@ #ifndef __ASM_ARCH_MFP_PXA300_H #define __ASM_ARCH_MFP_PXA300_H -#include <mach/mfp-pxa3xx.h> +#include "mfp-pxa3xx.h" /* GPIO */ #define GPIO46_GPIO MFP_CFG(GPIO46, AF1) diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/mfp-pxa320.h index 3ce4682ea..e8797cfc7 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h +++ b/arch/arm/mach-pxa/mfp-pxa320.h @@ -15,7 +15,7 @@ #ifndef __ASM_ARCH_MFP_PXA320_H #define __ASM_ARCH_MFP_PXA320_H -#include <mach/mfp-pxa3xx.h> +#include "mfp-pxa3xx.h" /* GPIO */ #define GPIO46_GPIO MFP_CFG(GPIO46, AF0) diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index 89863a01e..994edc015 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -20,7 +20,7 @@ #include <linux/syscore_ops.h> #include <mach/hardware.h> -#include <mach/mfp-pxa3xx.h> +#include "mfp-pxa3xx.h" #include <mach/pxa3xx-regs.h> #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/mfp-pxa3xx.h index d375195d9..d375195d9 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h +++ b/arch/arm/mach-pxa/mfp-pxa3xx.h diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/mfp-pxa930.h index 04f7c9704..113967bee 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h +++ b/arch/arm/mach-pxa/mfp-pxa930.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MFP_PXA9xx_H #define __ASM_ARCH_MFP_PXA9xx_H -#include <mach/mfp-pxa3xx.h> +#include "mfp-pxa3xx.h" /* GPIO */ #define GPIO46_GPIO MFP_CFG(GPIO46, AF0) diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 3b52b1aa0..38a96a193 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -47,19 +47,19 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa27x.h> -#include <mach/regs-rtc.h> +#include "pxa27x.h" +#include "regs-rtc.h" #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> -#include <mach/udc.h> -#include <mach/pxa27x-udc.h> -#include <linux/platform_data/camera-pxa.h> +#include "udc.h" +#include "pxa27x-udc.h" +#include <linux/platform_data/media/camera-pxa.h> #include <mach/audio.h> #include <mach/smemc.h> #include <media/soc_camera.h> -#include <mach/mioa701.h> +#include "mioa701.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/mioa701.h index e57f5c724..e57f5c724 100644 --- a/arch/arm/mach-pxa/include/mach/mioa701.h +++ b/arch/arm/mach-pxa/mioa701.h diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 14f6aaf8f..4d89029e5 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -22,7 +22,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include "generic.h" static void isp116x_pfm_delay(struct device *dev, int delay) diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index d04ed4961..9a22ae0ad 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -29,9 +29,9 @@ #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/pxa320.h> +#include "pxa320.h" -#include <mach/mxm8x10.h> +#include "mxm8x10.h" #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/include/mach/mxm8x10.h b/arch/arm/mach-pxa/mxm8x10.h index ffa15665a..ffa15665a 100644 --- a/arch/arm/mach-pxa/include/mach/mxm8x10.h +++ b/arch/arm/mach-pxa/mxm8x10.h diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 8fbfb1004..e5ae99db1 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -28,14 +28,14 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/audio.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> -#include <mach/udc.h> +#include "udc.h" #include <linux/platform_data/asoc-palm27x.h> -#include <mach/palm27x.h> +#include "palm27x.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/palm27x.h index d4eac3d6f..d4eac3d6f 100644 --- a/arch/arm/mach-pxa/include/mach/palm27x.h +++ b/arch/arm/mach-pxa/palm27x.h diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index cf210b11f..980f2847f 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -32,7 +32,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/audio.h> #include <mach/palmld.h> #include <linux/platform_data/mmc-pxamci.h> @@ -40,7 +40,7 @@ #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/asoc-palm27x.h> -#include <mach/palm27x.h> +#include "palm27x.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 3ed9b0294..876144aa3 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -33,16 +33,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/audio.h> -#include <mach/palmt5.h> +#include "palmt5.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <mach/udc.h> +#include "udc.h" #include <linux/platform_data/asoc-palm27x.h> -#include <mach/palm27x.h> +#include "palm27x.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/palmt5.h index e342c5921..f850cc9de 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/palmt5.h @@ -15,7 +15,7 @@ #ifndef _INCLUDE_PALMT5_H_ #define _INCLUDE_PALMT5_H_ -#include "irqs.h" /* PXA_GPIO_TO_IRQ */ +#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ /** HERE ARE GPIOs **/ diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 0b5c38767..18946594a 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -32,13 +32,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include <mach/audio.h> #include <mach/palmtc.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> -#include <mach/udc.h> +#include "udc.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index e64bb4326..36b46141a 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -32,13 +32,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include <mach/audio.h> -#include <mach/palmte2.h> +#include "palmte2.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> -#include <mach/udc.h> +#include "udc.h" #include <linux/platform_data/asoc-palm27x.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/palmte2.h index f89e989a7..f89e989a7 100644 --- a/arch/arm/mach-pxa/include/mach/palmte2.h +++ b/arch/arm/mach-pxa/palmte2.h diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index d8b937c87..4cc05ecce 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -31,20 +31,20 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa27x.h> -#include <mach/pxa27x-udc.h> +#include "pxa27x.h" +#include "pxa27x-udc.h" #include <mach/audio.h> -#include <mach/palmtreo.h> +#include "palmtreo.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <mach/udc.h> +#include "udc.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <mach/pxa2xx-regs.h> #include <linux/platform_data/asoc-palm27x.h> -#include <linux/platform_data/camera-pxa.h> -#include <mach/palm27x.h> +#include <linux/platform_data/media/camera-pxa.h> +#include "palm27x.h" #include <sound/pxa2xx-lib.h> diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/palmtreo.h index 714b65743..714b65743 100644 --- a/arch/arm/mach-pxa/include/mach/palmtreo.h +++ b/arch/arm/mach-pxa/palmtreo.h diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 83f830dd8..36646975b 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -37,16 +37,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/audio.h> #include <mach/palmtx.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <mach/udc.h> +#include "udc.h" #include <linux/platform_data/asoc-palm27x.h> -#include <mach/palm27x.h> +#include "palm27x.h" #include "generic.h" #include "devices.h" @@ -250,7 +250,7 @@ static inline void palmtx_keys_init(void) {} static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); char __iomem *nandaddr = this->IO_ADDR_W; if (cmd == NAND_CMD_NONE) diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 1a35ddf21..9c308de15 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -37,19 +37,19 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/audio.h> -#include <mach/palmz72.h> +#include "palmz72.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <mach/udc.h> +#include "udc.h" #include <linux/platform_data/asoc-palm27x.h> -#include <mach/palm27x.h> +#include "palm27x.h" -#include <mach/pm.h> -#include <linux/platform_data/camera-pxa.h> +#include "pm.h" +#include <linux/platform_data/media/camera-pxa.h> #include <media/soc_camera.h> diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/palmz72.h index 0d4700a79..0d4700a79 100644 --- a/arch/arm/mach-pxa/include/mach/palmz72.h +++ b/arch/arm/mach-pxa/palmz72.h diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 69918c7e3..ccca9f757 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -30,8 +30,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa27x.h> -#include <mach/pcm027.h> +#include "pxa27x.h" +#include "pcm027.h" #include "generic.h" /* diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/pcm027.h index 86ebd7b6c..047cdf234 100644 --- a/arch/arm/mach-pxa/include/mach/pcm027.h +++ b/arch/arm/mach-pxa/pcm027.h @@ -23,7 +23,7 @@ * Definitions of CPU card resources only */ -#include "irqs.h" /* PXA_GPIO_TO_IRQ */ +#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ /* phyCORE-PXA270 (PCM027) Interrupts */ #define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index b71c96f61..0bd5959ef 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -27,16 +27,16 @@ #include <linux/pwm.h> #include <linux/pwm_backlight.h> -#include <media/mt9v022.h> +#include <media/i2c/mt9v022.h> #include <media/soc_camera.h> -#include <linux/platform_data/camera-pxa.h> +#include <linux/platform_data/media/camera-pxa.h> #include <asm/mach/map.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/audio.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/pcm990_baseboard.h> +#include "pcm990_baseboard.h" #include <linux/platform_data/video-pxafb.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h index 7e544c149..79d35adfa 100644 --- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/pcm990_baseboard.h @@ -19,8 +19,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <mach/pcm027.h> -#include "irqs.h" /* PXA_GPIO_TO_IRQ */ +#include "pcm027.h" +#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ /* * definitions relevant only when the PCM-990 diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 37178a855..388463b99 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -16,7 +16,7 @@ #include <linux/errno.h> #include <linux/slab.h> -#include <mach/pm.h> +#include "pm.h" struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; static unsigned long *sleep_save; diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/pm.h index 51558bcee..51558bcee 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/pm.h diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 195b1121c..62a119137 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -41,9 +41,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include <linux/platform_data/mmc-pxamci.h> -#include <mach/udc.h> +#include "udc.h" #include <linux/platform_data/irda-pxaficp.h> #include <mach/poodle.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 1dc85ffc3..a177bf45f 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -30,9 +30,9 @@ #include <asm/suspend.h> #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include <mach/reset.h> -#include <mach/pm.h> +#include "pm.h" #include <mach/dma.h> #include <mach/smemc.h> diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/pxa25x.h index 5a341752e..2011e8da0 100644 --- a/arch/arm/mach-pxa/include/mach/pxa25x.h +++ b/arch/arm/mach-pxa/pxa25x.h @@ -3,7 +3,7 @@ #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include "mfp-pxa25x.h" #include <mach/irqs.h> #endif /* __MACH_PXA25x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/pxa27x-udc.h index 4cf28f670..4cf28f670 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h +++ b/arch/arm/mach-pxa/pxa27x-udc.h diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index ffc424028..8dfd1755c 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -28,10 +28,10 @@ #include <asm/irq.h> #include <asm/suspend.h> #include <mach/irqs.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/reset.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/pm.h> +#include "pm.h" #include <mach/dma.h> #include <mach/smemc.h> diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h index 1a4291936..075131d83 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/pxa27x.h @@ -4,7 +4,7 @@ #include <linux/suspend.h> #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> +#include "mfp-pxa27x.h" #include <mach/irqs.h> #define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index 447dcbb22..6b5e566f5 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -17,7 +17,7 @@ #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include "mfp-pxa25x.h" #include <mach/reset.h> #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 28c5b5686..df83b1bdd 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -18,7 +18,7 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/pxa300.h> +#include "pxa300.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/pxa300.h index 733b6412c..59fa41025 100644 --- a/arch/arm/mach-pxa/include/mach/pxa300.h +++ b/arch/arm/mach-pxa/pxa300.h @@ -1,7 +1,7 @@ #ifndef __MACH_PXA300_H #define __MACH_PXA300_H -#include <mach/pxa3xx.h> -#include <mach/mfp-pxa300.h> +#include "pxa3xx.h" +#include "mfp-pxa300.h" #endif /* __MACH_PXA300_H */ diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 2f55bb4b9..a26eec57e 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -18,7 +18,7 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/pxa320.h> +#include "pxa320.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/pxa320.h index b6204e470..b9e5115a1 100644 --- a/arch/arm/mach-pxa/include/mach/pxa320.h +++ b/arch/arm/mach-pxa/pxa320.h @@ -1,8 +1,8 @@ #ifndef __MACH_PXA320_H #define __MACH_PXA320_H -#include <mach/pxa3xx.h> -#include <mach/mfp-pxa320.h> +#include "pxa3xx.h" +#include "mfp-pxa320.h" #endif /* __MACH_PXA320_H */ diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index 1c85275cb..eba595fac 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -26,7 +26,7 @@ #include <linux/usb/otg.h> #include <mach/hardware.h> -#include <mach/regs-u2d.h> +#include "regs-u2d.h" #include <linux/platform_data/usb-pxa3xx-ulpi.h> struct pxa3xx_u2d_ulpi { diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 20ce2d386..a1c4c888f 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -30,7 +30,7 @@ #include <mach/pxa3xx-regs.h> #include <mach/reset.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/pm.h> +#include "pm.h" #include <mach/dma.h> #include <mach/smemc.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/pxa3xx.h index b4143fb66..b4143fb66 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx.h +++ b/arch/arm/mach-pxa/pxa3xx.h diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index ab624487c..da912be6e 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -17,7 +17,7 @@ #include <linux/gpio-pxa.h> #include <linux/platform_device.h> -#include <mach/pxa930.h> +#include "pxa930.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/pxa930.h index 190363b98..4eceb0297 100644 --- a/arch/arm/mach-pxa/include/mach/pxa930.h +++ b/arch/arm/mach-pxa/pxa930.h @@ -1,7 +1,7 @@ #ifndef __MACH_PXA930_H #define __MACH_PXA930_H -#include <mach/pxa3xx.h> -#include <mach/mfp-pxa930.h> +#include "pxa3xx.h" +#include "mfp-pxa930.h" #endif /* __MACH_PXA930_H */ diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 36571a9a4..8347d87a7 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -49,7 +49,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa300.h> +#include "pxa300.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> @@ -1046,7 +1046,7 @@ static void __init raumfeld_common_init(void) i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1); } -static void __init raumfeld_controller_init(void) +static void __init __maybe_unused raumfeld_controller_init(void) { int ret; @@ -1067,7 +1067,7 @@ static void __init raumfeld_controller_init(void) raumfeld_w1_init(); } -static void __init raumfeld_connector_init(void) +static void __init __maybe_unused raumfeld_connector_init(void) { pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config)); spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices)); @@ -1079,7 +1079,7 @@ static void __init raumfeld_connector_init(void) raumfeld_common_init(); } -static void __init raumfeld_speaker_init(void) +static void __init __maybe_unused raumfeld_speaker_init(void) { pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config)); spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices)); diff --git a/arch/arm/mach-pxa/include/mach/regs-rtc.h b/arch/arm/mach-pxa/regs-rtc.h index f0e4a589b..f0e4a589b 100644 --- a/arch/arm/mach-pxa/include/mach/regs-rtc.h +++ b/arch/arm/mach-pxa/regs-rtc.h diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/regs-u2d.h index c15c0c57d..c15c0c57d 100644 --- a/arch/arm/mach-pxa/include/mach/regs-u2d.h +++ b/arch/arm/mach-pxa/regs-u2d.h diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 710c493ea..1414b5f29 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -31,7 +31,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <mach/pxa930.h> +#include "pxa930.h" #include <linux/platform_data/video-pxafb.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index bdc0c41bc..b80eab999 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -27,10 +27,10 @@ #include <linux/io.h> #include <asm/mach-types.h> -#include <mach/pm.h> +#include "pm.h" #include <mach/pxa2xx-regs.h> -#include <mach/regs-rtc.h> -#include <mach/sharpsl_pm.h> +#include "regs-rtc.h" +#include "sharpsl_pm.h" /* * Constants diff --git a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/arch/arm/mach-pxa/sharpsl_pm.h index 905be6755..905be6755 100644 --- a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h +++ b/arch/arm/mach-pxa/sharpsl_pm.h diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index f4e2e2719..825f903ab 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -40,15 +40,15 @@ #include <asm/mach/sharpsl_param.h> #include <asm/hardware/scoop.h> -#include <mach/pxa27x.h> -#include <mach/pxa27x-udc.h> +#include "pxa27x.h" +#include "pxa27x-udc.h" #include <mach/reset.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/video-pxafb.h> #include <mach/spitz.h> -#include <mach/sharpsl_pm.h> +#include "sharpsl_pm.h" #include <mach/smemc.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index e191f9996..ea9f9034c 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -25,8 +25,8 @@ #include <mach/hardware.h> #include <mach/spitz.h> -#include <mach/pxa27x.h> -#include <mach/sharpsl_pm.h> +#include "pxa27x.h" +#include "sharpsl_pm.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 01de54243..702f4f14b 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -43,10 +43,10 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <linux/platform_data/mmc-pxamci.h> -#include <mach/udc.h> -#include <mach/pxa27x-udc.h> +#include "udc.h" +#include "pxa27x-udc.h" #include <mach/smemc.h> #include <linux/spi/spi.h> diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 349a13a76..4b38e821a 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -24,7 +24,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa930.h> +#include "pxa930.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/keypad-pxa27x.h> diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c index e0a532088..107f37210 100644 --- a/arch/arm/mach-pxa/tosa-bt.c +++ b/arch/arm/mach-pxa/tosa-bt.c @@ -16,7 +16,7 @@ #include <linux/delay.h> #include <linux/rfkill.h> -#include <mach/tosa_bt.h> +#include "tosa_bt.h" static void tosa_bt_on(struct tosa_bt_data *data) { diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index e6e27c046..13de66029 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -43,12 +43,12 @@ #include <asm/setup.h> #include <asm/mach-types.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include <mach/reset.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> -#include <mach/udc.h> -#include <mach/tosa_bt.h> +#include "udc.h" +#include "tosa_bt.h" #include <mach/audio.h> #include <mach/smemc.h> diff --git a/arch/arm/mach-pxa/include/mach/tosa_bt.h b/arch/arm/mach-pxa/tosa_bt.h index efc3c3d3b..efc3c3d3b 100644 --- a/arch/arm/mach-pxa/include/mach/tosa_bt.h +++ b/arch/arm/mach-pxa/tosa_bt.h diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 066e3a250..ea78bc5c4 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -41,7 +41,7 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/trizeps4.h> #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/udc.h index 9a827e32d..9a827e32d 100644 --- a/arch/arm/mach-pxa/include/mach/udc.h +++ b/arch/arm/mach-pxa/udc.h diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 7ecc61ad2..8e89d91b2 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -47,12 +47,12 @@ #include <linux/mtd/physmap.h> #include <linux/syscore_ops.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> #include <mach/regs-uart.h> #include <linux/platform_data/pcmcia-pxa2xx_viper.h> -#include <mach/viper.h> +#include "viper.h" #include <asm/setup.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/viper.h index 5f5fbf1f6..5f5fbf1f6 100644 --- a/arch/arm/mach-pxa/include/mach/viper.h +++ b/arch/arm/mach-pxa/viper.h diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 54122a983..c006ee902 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -31,14 +31,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/audio.h> #include <mach/vpac270.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/pxa27x-udc.h> -#include <mach/udc.h> +#include "pxa27x-udc.h" +#include "udc.h" #include <linux/platform_data/ata-pxa.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 13b1d4586..3f06cd905 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -28,7 +28,7 @@ #include <asm/mach/map.h> #include <mach/hardware.h> -#include <mach/pxa25x.h> +#include "pxa25x.h" #include <mach/smemc.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index d9899d73e..510e53387 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -35,13 +35,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa27x.h> -#include <mach/mfp-pxa27x.h> +#include "pxa27x.h" +#include "mfp-pxa27x.h" #include <mach/z2.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <mach/pm.h> +#include "pm.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 30e62a3f0..515b7ddda 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -38,17 +38,17 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa27x.h> +#include "pxa27x.h" #include <mach/regs-uart.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mmc-pxamci.h> -#include <mach/pxa27x-udc.h> -#include <mach/udc.h> +#include "pxa27x-udc.h" +#include "udc.h" #include <linux/platform_data/video-pxafb.h> -#include <mach/pm.h> +#include "pm.h" #include <mach/audio.h> #include <linux/platform_data/pcmcia-pxa2xx_viper.h> -#include <mach/zeus.h> +#include "zeus.h" #include <mach/smemc.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/zeus.h index 56024f81d..56024f81d 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/zeus.h diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index e20359a74..3642389b3 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -25,10 +25,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/pxa3xx.h> +#include "pxa3xx.h" #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> -#include <mach/zylonite.h> +#include "zylonite.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/zylonite.h index ecca976f0..ecca976f0 100644 --- a/arch/arm/mach-pxa/include/mach/zylonite.h +++ b/arch/arm/mach-pxa/zylonite.h diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 869bce7c3..e247acf14 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -21,8 +21,8 @@ #include <linux/platform_data/pca953x.h> #include <linux/gpio.h> -#include <mach/pxa300.h> -#include <mach/zylonite.h> +#include "pxa300.h" +#include "zylonite.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 9942bac4c..47961ae0c 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -18,8 +18,8 @@ #include <linux/init.h> #include <linux/gpio.h> -#include <mach/pxa320.h> -#include <mach/zylonite.h> +#include "pxa320.h" +#include "zylonite.h" #include "generic.h" diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 2256cd1e2..73494500b 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_QCOM - bool "Qualcomm Support" if ARCH_MULTI_V7 + bool "Qualcomm Support" + depends on ARCH_MULTI_V7 select ARCH_SUPPORTS_BIG_ENDIAN select ARM_GIC select ARM_AMBA diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c index 9b00123a3..5494c9e0c 100644 --- a/arch/arm/mach-qcom/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -332,7 +332,7 @@ static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) } } -static struct smp_operations smp_msm8660_ops __initdata = { +static const struct smp_operations smp_msm8660_ops __initconst = { .smp_prepare_cpus = qcom_smp_prepare_cpus, .smp_secondary_init = qcom_secondary_init, .smp_boot_secondary = msm8660_boot_secondary, @@ -342,7 +342,7 @@ static struct smp_operations smp_msm8660_ops __initdata = { }; CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops); -static struct smp_operations qcom_smp_kpssv1_ops __initdata = { +static const struct smp_operations qcom_smp_kpssv1_ops __initconst = { .smp_prepare_cpus = qcom_smp_prepare_cpus, .smp_secondary_init = qcom_secondary_init, .smp_boot_secondary = kpssv1_boot_secondary, @@ -352,7 +352,7 @@ static struct smp_operations qcom_smp_kpssv1_ops __initdata = { }; CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops); -static struct smp_operations qcom_smp_kpssv2_ops __initdata = { +static const struct smp_operations qcom_smp_kpssv2_ops __initconst = { .smp_prepare_cpus = qcom_smp_prepare_cpus, .smp_secondary_init = qcom_secondary_init, .smp_boot_secondary = kpssv2_boot_secondary, diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 565925f37..70ab4a25a 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -1,13 +1,30 @@ -menu "RealView platform type" - depends on ARCH_REALVIEW +menuconfig ARCH_REALVIEW + bool "ARM Ltd. RealView family" + depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 + select ARM_AMBA + select ARM_TIMER_SP804 + select COMMON_CLK_VERSATILE + select GPIO_PL061 if GPIOLIB + select ICST + select PLAT_VERSATILE + select PLAT_VERSATILE_SCHED_CLOCK + help + This enables support for ARM Ltd RealView boards. + +if ARCH_REALVIEW config REALVIEW_DT bool "Support RealView(R) Device Tree based boot" select ARM_GIC + select CLK_SP810 + select HAVE_SMP + select ICST + select MACH_REALVIEW_EB if ARCH_MULTI_V5 select MFD_SYSCON select POWER_RESET select POWER_RESET_VERSATILE select POWER_SUPPLY + select SMP_ON_UP if SMP select SOC_REALVIEW select USE_OF help @@ -17,14 +34,32 @@ config REALVIEW_DT config MACH_REALVIEW_EB bool "Support RealView(R) Emulation Baseboard" select ARM_GIC + select CPU_ARM926T if ARCH_MULTI_V5 help Include support for the ARM(R) RealView(R) Emulation Baseboard - platform. + platform. On an ARMv5 kernel, this will include support for + the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least + one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore + core tile options should be enabled. + +config REALVIEW_EB_ARM1136 + bool "Support ARM1136J(F)-S Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + select CPU_V6 + help + Enable support for the ARM1136 tile fitted to the + Realview(R) Emulation Baseboard platform. + +config REALVIEW_EB_ARM1176 + bool "Support ARM1176JZ(F)-S Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + help + Enable support for the ARM1176 tile fitted to the + Realview(R) Emulation Baseboard platform. config REALVIEW_EB_A9MP bool "Support Multicore Cortex-A9 Tile" - depends on MACH_REALVIEW_EB - select CPU_V7 + depends on MACH_REALVIEW_EB && ARCH_MULTI_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_SMP @@ -35,9 +70,7 @@ config REALVIEW_EB_A9MP config REALVIEW_EB_ARM11MP bool "Support ARM11MPCore Tile" - depends on MACH_REALVIEW_EB - select ARCH_HAS_BARRIERS if SMP - select CPU_V6K + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_SMP @@ -48,7 +81,7 @@ config REALVIEW_EB_ARM11MP config REALVIEW_EB_ARM11MP_REVB bool "Support ARM11MPCore RevB Tile" - depends on REALVIEW_EB_ARM11MP + depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6 help Enable support for the ARM11MPCore Revision B tile on the Realview(R) Emulation Baseboard platform. Since there are device @@ -57,9 +90,8 @@ config REALVIEW_EB_ARM11MP_REVB config MACH_REALVIEW_PB11MP bool "Support RealView(R) Platform Baseboard for ARM11MPCore" - select ARCH_HAS_BARRIERS if SMP + depends on ARCH_MULTI_V6 select ARM_GIC - select CPU_V6K select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_PATA_PLATFORM @@ -73,6 +105,7 @@ config MACH_REALVIEW_PB11MP # ARMv6 CPU without K extensions, but does have the new exclusive ops config MACH_REALVIEW_PB1176 bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" + depends on ARCH_MULTI_V6 select ARM_GIC select CPU_V6 select HAVE_TCM @@ -92,8 +125,8 @@ config REALVIEW_PB1176_SECURE_FLASH config MACH_REALVIEW_PBA8 bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" + depends on ARCH_MULTI_V7 select ARM_GIC - select CPU_V7 select HAVE_PATA_PLATFORM help Include support for the ARM(R) RealView Platform Baseboard for @@ -101,15 +134,15 @@ config MACH_REALVIEW_PBA8 support for PCI-E and Compact Flash. config MACH_REALVIEW_PBX - bool "Support RealView(R) Platform Baseboard Explore" - select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET + bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9" + depends on ARCH_MULTI_V7 select ARM_GIC select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_PATA_PLATFORM select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 - select ZONE_DMA if SPARSEMEM + select ZONE_DMA help Include support for the ARM(R) RealView(R) Platform Baseboard Explore. @@ -124,6 +157,6 @@ config REALVIEW_HIGH_PHYS_OFFSET the board supports 512MB of RAM, this option allows the memory to be accessed contiguously at the high physical offset. On the PBX board, disabling this option allows 1GB of - RAM to be used with SPARSEMEM. + RAM to be used with HIGHMEM. -endmenu +endif diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index e07fdf7ae..dae8d86ef 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -1,13 +1,19 @@ # # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ + -I$(srctree)/arch/arm/plat-versatile/include obj-y := core.o obj-$(CONFIG_REALVIEW_DT) += realview-dt.o +obj-$(CONFIG_SMP) += platsmp-dt.o + +ifdef CONFIG_ATAGS obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o obj-$(CONFIG_SMP) += platsmp.o +endif obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/board-eb.h index a301e61a5..a850ae694 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/board-eb.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/board-eb.h - * * Copyright (C) 2007 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -21,7 +19,7 @@ #ifndef __ASM_ARCH_BOARD_EB_H #define __ASM_ARCH_BOARD_EB_H -#include <mach/platform.h> +#include "platform.h" /* * RealView EB + ARM11MPCore peripheral addresses diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/board-pb1176.h index 2a15fef94..29c04a9e1 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/board-pb1176.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/board-pb1176.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -21,7 +19,7 @@ #ifndef __ASM_ARCH_BOARD_PB1176_H #define __ASM_ARCH_BOARD_PB1176_H -#include <mach/platform.h> +#include "platform.h" /* * Peripheral addresses diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/board-pb11mp.h index aa2d4e02e..b16e6e85e 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/board-pb11mp.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/board-pb11mp.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -21,7 +19,7 @@ #ifndef __ASM_ARCH_BOARD_PB11MP_H #define __ASM_ARCH_BOARD_PB11MP_H -#include <mach/platform.h> +#include "platform.h" /* * Peripheral addresses diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/board-pba8.h index 4dfc67a4f..6a1391f50 100644 --- a/arch/arm/mach-realview/include/mach/board-pba8.h +++ b/arch/arm/mach-realview/board-pba8.h @@ -1,6 +1,4 @@ /* - * include/asm-arm/arch-realview/board-pba8.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -21,7 +19,7 @@ #ifndef __ASM_ARCH_BOARD_PBA8_H #define __ASM_ARCH_BOARD_PBA8_H -#include <mach/platform.h> +#include "platform.h" /* * Peripheral addresses diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/board-pbx.h index 848bfff6d..5cda480b1 100644 --- a/arch/arm/mach-realview/include/mach/board-pbx.h +++ b/arch/arm/mach-realview/board-pbx.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/board-pbx.h - * * Copyright (C) 2009 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -20,7 +18,7 @@ #ifndef __ASM_ARCH_BOARD_PBX_H #define __ASM_ARCH_BOARD_PBX_H -#include <mach/platform.h> +#include "platform.h" /* * Peripheral addresses diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 44575edc4..baf174542 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -36,8 +36,7 @@ #include <linux/memblock.h> #include <clocksource/timer-sp804.h> - -#include <mach/hardware.h> +#include "hardware.h" #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/hardware/icst.h> @@ -46,8 +45,7 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <mach/platform.h> -#include <mach/irqs.h> +#include "platform.h" #include <plat/sched_clock.h> diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 868ece221..05a995ea1 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-realview/core.h - * * Copyright (C) 2004 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd * @@ -54,7 +52,7 @@ extern int realview_usb_register(struct resource *res); extern void realview_init_early(void); extern void realview_fixup(struct tag *tags, char **from); -extern struct smp_operations realview_smp_ops; +extern const struct smp_operations realview_smp_ops; extern void realview_cpu_die(unsigned int cpu); #endif diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/hardware.h index 281e71c97..957a230aa 100644 --- a/arch/arm/mach-realview/include/mach/hardware.h +++ b/arch/arm/mach-realview/hardware.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/hardware.h - * * This file contains the hardware definitions of the RealView boards. * * Copyright (C) 2003 ARM Limited. diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h deleted file mode 100644 index 9a732195a..000000000 --- a/arch/arm/mach-realview/include/mach/barriers.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * Barriers redefined for RealView ARM11MPCore platforms with L220 cache - * controller to work around hardware errata causing the outer_sync() - * operation to deadlock the system. - */ -#define mb() dsb() -#define rmb() dsb() -#define wmb() mb() diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h deleted file mode 100644 index 78854f2fa..000000000 --- a/arch/arm/mach-realview/include/mach/irqs.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/irqs.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include <mach/irqs-eb.h> -#include <mach/irqs-pb11mp.h> -#include <mach/irqs-pb1176.h> -#include <mach/irqs-pba8.h> -#include <mach/irqs-pbx.h> - -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 - -#define IRQ_GIC_START 32 - -#ifndef NR_IRQS -#error "NR_IRQS not defined by the board-specific files" -#endif - -#endif diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h deleted file mode 100644 index 23e7a313f..000000000 --- a/arch/arm/mach-realview/include/mach/memory.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#ifdef CONFIG_SPARSEMEM - -/* - * Sparsemem definitions for RealView PBX. - * - * The RealView PBX board has another block of 512MB of RAM at 0x20000000, - * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000) - * may be used for DMA. - * - * The macros below define a section size of 256MB and a non-linear virtual to - * physical mapping: - * - * 256MB @ 0x00000000 -> PAGE_OFFSET - * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000 - * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000 - */ -#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET -#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET" -#endif - -#define MAX_PHYSMEM_BITS 32 -#define SECTION_SIZE_BITS 28 - -/* bank page offsets */ -#define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000) -#define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000) - -#define PHYS_OFFSET PLAT_PHYS_OFFSET - -#define __phys_to_virt(phys) \ - ((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \ - (phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \ - (phys) + PAGE_OFFSET) - -#define __virt_to_phys(virt) \ - ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 : \ - (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 : \ - (virt) - PAGE_OFFSET) - -#endif /* CONFIG_SPARSEMEM */ - -#endif diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h deleted file mode 100644 index cfa30d217..000000000 --- a/arch/arm/mach-realview/include/mach/uncompress.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/uncompress.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <mach/board-eb.h> -#include <mach/board-pb11mp.h> -#include <mach/board-pb1176.h> -#include <mach/board-pba8.h> -#include <mach/board-pbx.h> - -#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) -#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) -#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) -#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) - -/* - * Return the UART base address - */ -static inline unsigned long get_uart_base(void) -{ - if (machine_is_realview_eb()) - return REALVIEW_EB_UART0_BASE; - else if (machine_is_realview_pb11mp()) - return REALVIEW_PB11MP_UART0_BASE; - else if (machine_is_realview_pb1176()) - return REALVIEW_PB1176_UART0_BASE; - else if (machine_is_realview_pba8()) - return REALVIEW_PBA8_UART0_BASE; - else if (machine_is_realview_pbx()) - return REALVIEW_PBX_UART0_BASE; - else - return 0; -} - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 5)) - barrier(); - - AMBA_UART_DR(base) = c; -} - -static inline void flush(void) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/irqs-eb.h index 44754230f..61e31680a 100644 --- a/arch/arm/mach-realview/include/mach/irqs-eb.h +++ b/arch/arm/mach-realview/irqs-eb.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/irqs-eb.h - * * Copyright (C) 2007 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -21,6 +19,7 @@ #ifndef __MACH_IRQS_EB_H #define __MACH_IRQS_EB_H +#define IRQ_LOCALTIMER 29 #define IRQ_EB_GIC_START 32 /* @@ -112,21 +111,4 @@ #define NR_GIC_EB11MP 2 -/* - * Only define NR_IRQS if less than NR_IRQS_EB - */ -#define NR_IRQS_EB (IRQ_EB_GIC_START + 128) - -#if defined(CONFIG_MACH_REALVIEW_EB) \ - && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_EB -#endif - -#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ - && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_EB11MP -#endif - #endif /* __MACH_IRQS_EB_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/irqs-pb1176.h index 708f84156..778edfd43 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ b/arch/arm/mach-realview/irqs-pb1176.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/irqs-pb1176.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -76,25 +74,4 @@ #define IRQ_PB1176_SCTL -1 -#define NR_GIC_PB1176 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB1176 - */ -#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB1176) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB1176 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB1176 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB1176 */ - #endif /* __MACH_IRQS_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/irqs-pb11mp.h index 34e255add..938898a3d 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h +++ b/arch/arm/mach-realview/irqs-pb11mp.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/irqs-pb11mp.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -21,6 +19,7 @@ #ifndef __MACH_IRQS_PB11MP_H #define __MACH_IRQS_PB11MP_H +#define IRQ_LOCALTIMER 29 #define IRQ_TC11MP_GIC_START 32 #define IRQ_PB11MP_GIC_START 64 @@ -95,28 +94,4 @@ #define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ #define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ -#define IRQ_PB11MP_SMC -1 -#define IRQ_PB11MP_SCTL -1 - -#define NR_GIC_PB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB11MP - */ -#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB11MP) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB11MP -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB11MP -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB11MP */ - #endif /* __MACH_IRQS_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/irqs-pba8.h index 4a88a4edb..262e32193 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pba8.h +++ b/arch/arm/mach-realview/irqs-pba8.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/irqs-pba8.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -70,25 +68,4 @@ #define IRQ_PBA8_SMC -1 #define IRQ_PBA8_SCTL -1 -#define NR_GIC_PBA8 1 - -/* - * Only define NR_IRQS if less than NR_IRQS_PBA8 - */ -#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) - -#if defined(CONFIG_MACH_REALVIEW_PBA8) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PBA8 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PBA8 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PBA8 */ - #endif /* __MACH_IRQS_PBA8_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/irqs-pbx.h index 206a3001f..4ef0567de 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pbx.h +++ b/arch/arm/mach-realview/irqs-pbx.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/irqs-pbx.h - * * Copyright (C) 2009 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -20,6 +18,7 @@ #ifndef __MACH_IRQS_PBX_H #define __MACH_IRQS_PBX_H +#define IRQ_LOCALTIMER 29 #define IRQ_PBX_GIC_START 32 /* @@ -85,25 +84,4 @@ #define IRQ_PBX_SMC -1 #define IRQ_PBX_SCTL -1 -#define NR_GIC_PBX 1 - -/* - * Only define NR_IRQS if less than NR_IRQS_PBX - */ -#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PBX) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PBX -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PBX -#endif - -#endif /* CONFIG_MACH_REALVIEW_PBX */ - #endif /* __MACH_IRQS_PBX_H */ diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/platform.h index 1b77a27ba..11121739d 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/platform.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/platform.h - * * Copyright (c) ARM Limited 2003. All rights reserved. * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c new file mode 100644 index 000000000..6964e8876 --- /dev/null +++ b/arch/arm/mach-realview/platsmp-dt.c @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2015 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/smp.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> + +#include <asm/cacheflush.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> + +#include <plat/platsmp.h> + +#include "core.h" + +#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30 + +static const struct of_device_id realview_scu_match[] = { + { .compatible = "arm,arm11mp-scu", }, + { .compatible = "arm,cortex-a9-scu", }, + { .compatible = "arm,cortex-a5-scu", }, + { } +}; + +static const struct of_device_id realview_syscon_match[] = { + { .compatible = "arm,core-module-integrator", }, + { .compatible = "arm,realview-eb-syscon", }, + { .compatible = "arm,realview-pb11mp-syscon", }, + { .compatible = "arm,realview-pbx-syscon", }, + { }, +}; + +static void __init realview_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *np; + void __iomem *scu_base; + struct regmap *map; + unsigned int ncores; + int i; + + np = of_find_matching_node(NULL, realview_scu_match); + if (!np) { + pr_err("PLATSMP: No SCU base address\n"); + return; + } + scu_base = of_iomap(np, 0); + of_node_put(np); + if (!scu_base) { + pr_err("PLATSMP: No SCU remap\n"); + return; + } + + scu_enable(scu_base); + ncores = scu_get_core_count(scu_base); + pr_info("SCU: %d cores detected\n", ncores); + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); + iounmap(scu_base); + + /* The syscon contains the magic SMP start address registers */ + np = of_find_matching_node(NULL, realview_syscon_match); + if (!np) { + pr_err("PLATSMP: No syscon match\n"); + return; + } + map = syscon_node_to_regmap(np); + if (IS_ERR(map)) { + pr_err("PLATSMP: No syscon regmap\n"); + return; + } + /* Put the boot address in this magic register */ + regmap_write(map, REALVIEW_SYS_FLAGSSET_OFFSET, + virt_to_phys(versatile_secondary_startup)); +} + +static const struct smp_operations realview_dt_smp_ops __initconst = { + .smp_prepare_cpus = realview_smp_prepare_cpus, + .smp_secondary_init = versatile_secondary_init, + .smp_boot_secondary = versatile_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = realview_cpu_die, +#endif +}; +CPU_METHOD_OF_DECLARE(realview_smp, "arm,realview-smp", &realview_dt_smp_ops); diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 98e3052b7..e8ab69c7a 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -13,13 +13,13 @@ #include <linux/smp.h> #include <linux/io.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/mach-types.h> #include <asm/smp_scu.h> -#include <mach/board-eb.h> -#include <mach/board-pb11mp.h> -#include <mach/board-pbx.h> +#include "board-eb.h" +#include "board-pb11mp.h" +#include "board-pbx.h" #include <plat/platsmp.h> @@ -75,7 +75,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus) __io_address(REALVIEW_SYS_FLAGSSET)); } -struct smp_operations realview_smp_ops __initdata = { +const struct smp_operations realview_smp_ops __initconst = { .smp_init_cpus = realview_smp_init_cpus, .smp_prepare_cpus = realview_smp_prepare_cpus, .smp_secondary_init = versatile_secondary_init, diff --git a/arch/arm/mach-realview/realview-dt.c b/arch/arm/mach-realview/realview-dt.c index 382cc1b90..88b672479 100644 --- a/arch/arm/mach-realview/realview-dt.c +++ b/arch/arm/mach-realview/realview-dt.c @@ -11,7 +11,6 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/hardware/cache-l2x0.h> -#include "core.h" static const char *const realview_dt_platform_compat[] __initconst = { "arm,realview-eb", diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index b3869cbbc..b442fa61e 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -31,20 +31,21 @@ #include <linux/platform_data/clk-realview.h> #include <linux/reboot.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/pgtable.h> #include <asm/hardware/cache-l2x0.h> #include <asm/smp_twd.h> #include <asm/system_info.h> +#include <asm/outercache.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/board-eb.h> -#include <mach/irqs.h> +#include "board-eb.h" +#include "irqs-eb.h" #include "core.h" @@ -450,6 +451,12 @@ static void __init realview_eb_init(void) * Bits: .... ...0 0111 1001 0000 .... .... .... */ l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); + + /* + * due to a bug in the l220 cache controller, we must not call + * the sync function. stub it out here instead! + */ + outer_cache.sync = NULL; #endif pmu_device.name = core_tile_a9mp() ? "armv7-pmu" : "armv6-pmu"; platform_device_register(&pmu_device); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index ce92c1823..537f3878d 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -34,7 +34,7 @@ #include <linux/reboot.h> #include <linux/memblock.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/pgtable.h> @@ -45,8 +45,8 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/board-pb1176.h> -#include <mach/irqs.h> +#include "board-pb1176.h" +#include "irqs-pb1176.h" #include "core.h" diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 15c45e250..a90a0752f 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -31,7 +31,7 @@ #include <linux/platform_data/clk-realview.h> #include <linux/reboot.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/pgtable.h> @@ -42,9 +42,10 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/outercache.h> -#include <mach/board-pb11mp.h> -#include <mach/irqs.h> +#include "board-pb11mp.h" +#include "irqs-pb11mp.h" #include "core.h" @@ -345,6 +346,11 @@ static void __init realview_pb11mp_init(void) * Bits: .... ...0 0111 1001 0000 .... .... .... */ l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff); + /* + * due to a bug in the l220 cache controller, we must not call + * the sync function. stub it out here instead! + */ + outer_cache.sync = NULL; #endif realview_flash_register(realview_pb11mp_flash_resource, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 4c64662f5..ddafb67c2 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -39,9 +39,9 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/board-pba8.h> -#include <mach/irqs.h> +#include "hardware.h" +#include "board-pba8.h" +#include "irqs-pba8.h" #include "core.h" @@ -77,14 +77,6 @@ static struct map_desc realview_pba8_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, -#ifdef CONFIG_PCI - { - .virtual = PCIX_UNIT_BASE, - .pfn = __phys_to_pfn(REALVIEW_PBA8_PCI_BASE), - .length = REALVIEW_PBA8_PCI_BASE_SIZE, - .type = MT_DEVICE - }, -#endif #ifdef CONFIG_DEBUG_LL { .virtual = IO_ADDRESS(REALVIEW_PBA8_UART0_BASE), diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 9a22b8642..b9f075778 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -41,9 +41,9 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/board-pbx.h> -#include <mach/irqs.h> +#include "hardware.h" +#include "board-pbx.h" +#include "irqs-pbx.h" #include "core.h" @@ -79,14 +79,6 @@ static struct map_desc realview_pbx_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, -#ifdef CONFIG_PCI - { - .virtual = PCIX_UNIT_BASE, - .pfn = __phys_to_pfn(REALVIEW_PBX_PCI_BASE), - .length = REALVIEW_PBX_PCI_BASE_SIZE, - .type = MT_DEVICE, - }, -#endif #ifdef CONFIG_DEBUG_LL { .virtual = IO_ADDRESS(REALVIEW_PBX_UART0_BASE), diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index ae4eb7cc4..cef42fd88 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -1,5 +1,6 @@ config ARCH_ROCKCHIP - bool "Rockchip RK2928 and RK3xxx SOCs" if ARCH_MULTI_V7 + bool "Rockchip RK2928 and RK3xxx SOCs" + depends on ARCH_MULTI_V7 select PINCTRL select PINCTRL_ROCKCHIP select ARCH_HAS_RESET_CONTROLLER diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 3e7a4b761..d42a07e33 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -42,6 +42,7 @@ static int ncores; #define PMU_PWRDN_SCU 4 static struct regmap *pmu; +static int has_pmu = true; static int pmu_power_domain_is_on(int pd) { @@ -89,20 +90,23 @@ static int pmu_set_power_domain(int pd, bool on) if (!IS_ERR(rstc) && !on) reset_control_assert(rstc); - ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val); - if (ret < 0) { - pr_err("%s: could not update power domain\n", __func__); - return ret; - } - - ret = -1; - while (ret != on) { - ret = pmu_power_domain_is_on(pd); + if (has_pmu) { + ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val); if (ret < 0) { - pr_err("%s: could not read power domain state\n", + pr_err("%s: could not update power domain\n", __func__); return ret; } + + ret = -1; + while (ret != on) { + ret = pmu_power_domain_is_on(pd); + if (ret < 0) { + pr_err("%s: could not read power domain state\n", + __func__); + return ret; + } + } } if (!IS_ERR(rstc)) { @@ -122,7 +126,7 @@ static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle) { int ret; - if (!sram_base_addr || !pmu) { + if (!sram_base_addr || (has_pmu && !pmu)) { pr_err("%s: sram or pmu missing for cpu boot\n", __func__); return -ENXIO; } @@ -275,7 +279,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) return; } - if (rockchip_smp_prepare_pmu()) + if (has_pmu && rockchip_smp_prepare_pmu()) return; if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { @@ -318,6 +322,13 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) pmu_set_power_domain(0 + i, false); } +static void __init rk3036_smp_prepare_cpus(unsigned int max_cpus) +{ + has_pmu = false; + + rockchip_smp_prepare_cpus(max_cpus); +} + #ifdef CONFIG_HOTPLUG_CPU static int rockchip_cpu_kill(unsigned int cpu) { @@ -340,7 +351,16 @@ static void rockchip_cpu_die(unsigned int cpu) } #endif -static struct smp_operations rockchip_smp_ops __initdata = { +static const struct smp_operations rk3036_smp_ops __initconst = { + .smp_prepare_cpus = rk3036_smp_prepare_cpus, + .smp_boot_secondary = rockchip_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_kill = rockchip_cpu_kill, + .cpu_die = rockchip_cpu_die, +#endif +}; + +static const struct smp_operations rockchip_smp_ops __initconst = { .smp_prepare_cpus = rockchip_smp_prepare_cpus, .smp_boot_secondary = rockchip_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU @@ -349,4 +369,5 @@ static struct smp_operations rockchip_smp_ops __initdata = { #endif }; +CPU_METHOD_OF_DECLARE(rk3036_smp, "rockchip,rk3036-smp", &rk3036_smp_ops); CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops); diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index 251c7b9c5..3f07cc5df 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -82,6 +82,7 @@ static const char * const rockchip_board_dt_compat[] = { "rockchip,rk3066a", "rockchip,rk3066b", "rockchip,rk3188", + "rockchip,rk3228", "rockchip,rk3288", NULL, }; diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h index 69459dbbd..712333fec 100644 --- a/arch/arm/mach-s3c24xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h @@ -85,3 +85,17 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, static inline void s3c_pm_restored_gpios(void) { } static inline void samsung_pm_saved_gpios(void) { } + +/* state for IRQs over sleep */ + +/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources + * + * set bit to 1 in allow bitfield to enable the wakeup settings on it +*/ +#ifdef CONFIG_PM_SLEEP +#define s3c_irqwake_intallow (1L << 30 | 0xfL) +#define s3c_irqwake_eintallow (0x0000fff0L) +#else +#define s3c_irqwake_eintallow 0 +#define s3c_irqwake_intallow 0 +#endif diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c index b91341ef2..417b7a20c 100644 --- a/arch/arm/mach-s3c24xx/irq-pm.c +++ b/arch/arm/mach-s3c24xx/irq-pm.c @@ -25,19 +25,10 @@ #include <mach/regs-irq.h> #include <mach/regs-gpio.h> +#include <mach/pm-core.h> #include <asm/irq.h> -/* state for IRQs over sleep */ - -/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources - * - * set bit to 1 in allow bitfield to enable the wakeup settings on it -*/ - -unsigned long s3c_irqwake_intallow = 1L << 30 | 0xfL; -unsigned long s3c_irqwake_eintallow = 0x0000fff0L; - int s3c_irq_wake(struct irq_data *data, unsigned int state) { unsigned long irqbit = 1 << data->hwirq; diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 28c7097e8..7c0c420c3 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -2,6 +2,26 @@ # Simtec Electronics, Ben Dooks <ben@simtec.co.uk> # # Licensed under GPLv2 +menuconfig ARCH_S3C64XX + bool "Samsung S3C64XX" if ARCH_MULTI_V6 + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_VIC + select CLKSRC_SAMSUNG_PWM + select COMMON_CLK_SAMSUNG + select GPIO_SAMSUNG if ATAGS + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_TCM + select PLAT_SAMSUNG + select PM_GENERIC_DOMAINS if PM + select S3C_DEV_NAND if ATAGS + select S3C_GPIO_TRACK if ATAGS + select SAMSUNG_ATAGS if ATAGS + select SAMSUNG_WAKEMASK if PM + select SAMSUNG_WDT_RESET + help + Samsung S3C64XX series based systems if ARCH_S3C64XX @@ -90,6 +110,7 @@ config S3C64XX_SETUP_USB_PHY config MACH_SMDK6400 bool "SMDK6400" + depends on ATAGS select CPU_S3C6400 select S3C64XX_SETUP_SDHCI select S3C_DEV_HSMMC1 @@ -100,6 +121,7 @@ config MACH_SMDK6400 config MACH_ANW6410 bool "A&W6410" + depends on ATAGS select CPU_S3C6410 select S3C64XX_SETUP_FB_24BPP select S3C_DEV_FB @@ -108,6 +130,7 @@ config MACH_ANW6410 config MACH_MINI6410 bool "MINI6410" + depends on ATAGS select CPU_S3C6410 select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_SDHCI @@ -123,6 +146,7 @@ config MACH_MINI6410 config MACH_REAL6410 bool "REAL6410" + depends on ATAGS select CPU_S3C6410 select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_SDHCI @@ -138,6 +162,7 @@ config MACH_REAL6410 config MACH_SMDK6410 bool "SMDK6410" + depends on ATAGS select CPU_S3C6410 select HAVE_S3C2410_WATCHDOG if WATCHDOG select S3C64XX_SETUP_FB_24BPP @@ -225,6 +250,7 @@ config SMDK6410_WM1192_EV1 config MACH_NCP bool "NCP" + depends on ATAGS select CPU_S3C6410 select S3C64XX_SETUP_I2C1 select S3C_DEV_HSMMC1 @@ -234,6 +260,7 @@ config MACH_NCP config MACH_HMT bool "Airgoo HMT" + depends on ATAGS select CPU_S3C6410 select S3C64XX_SETUP_FB_24BPP select S3C_DEV_FB @@ -265,18 +292,21 @@ config MACH_SMARTQ config MACH_SMARTQ5 bool "SmartQ 5" + depends on ATAGS select MACH_SMARTQ help Machine support for the SmartQ 5 config MACH_SMARTQ7 bool "SmartQ 7" + depends on ATAGS select MACH_SMARTQ help Machine support for the SmartQ 7 config MACH_WLF_CRAGG_6410 bool "Wolfson Cragganmore 6410" + depends on ATAGS depends on I2C=y select CPU_S3C6410 select LEDS_GPIO_REGISTER @@ -310,7 +340,6 @@ config MACH_S3C64XX_DT select CPU_S3C6410 select PINCTRL select PINCTRL_S3C64XX - select USE_OF help Machine support for Samsung S3C6400/S3C6410 machines with Device Tree enabled. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index bb233f342..256cd5b40 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -5,21 +5,25 @@ # # Licensed under GPLv2 -# Core - -obj-y += common.o - -# Core support - -obj-$(CONFIG_CPU_S3C6400) += s3c6400.o -obj-$(CONFIG_CPU_S3C6410) += s3c6410.o +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include +asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include # PM obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o +obj-$(CONFIG_PM_SLEEP) += sleep.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o +ifdef CONFIG_SAMSUNG_ATAGS + +obj-$(CONFIG_PM_SLEEP) += irq-pm.o + +# Core + +obj-y += common.o +obj-$(CONFIG_CPU_S3C6400) += s3c6400.o +obj-$(CONFIG_CPU_S3C6410) += s3c6410.o + # DMA support obj-$(CONFIG_S3C64XX_PL080) += pl080.o @@ -55,4 +59,6 @@ obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o +endif + obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index ddb30b843..7c66ce1a6 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -39,6 +39,7 @@ #include <asm/system_misc.h> #include <mach/map.h> +#include <mach/irqs.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> @@ -208,7 +209,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) static __init int s3c64xx_dev_init(void) { /* Not applicable when using DT. */ - if (of_have_populated_dt()) + if (of_have_populated_dt() || !soc_is_s3c64xx()) return 0; subsys_system_register(&s3c64xx_subsys, NULL); @@ -413,7 +414,7 @@ static int __init s3c64xx_init_irq_eint(void) int irq; /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */ - if (of_have_populated_dt()) + if (of_have_populated_dt() || !soc_is_s3c64xx()) return -ENODEV; for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c index 93aa8cb70..5322db511 100644 --- a/arch/arm/mach-s3c64xx/cpuidle.c +++ b/arch/arm/mach-s3c64xx/cpuidle.c @@ -18,6 +18,7 @@ #include <asm/cpuidle.h> +#include <plat/cpu.h> #include <mach/map.h> #include "regs-sys.h" @@ -57,6 +58,8 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = { static int __init s3c64xx_init_cpuidle(void) { - return cpuidle_register(&s3c64xx_cpuidle_driver, NULL); + if (soc_is_s3c64xx()) + return cpuidle_register(&s3c64xx_cpuidle_driver, NULL); + return 0; } device_initcall(s3c64xx_init_cpuidle); diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c index ff780a8d8..b57783371 100644 --- a/arch/arm/mach-s3c64xx/dev-audio.c +++ b/arch/arm/mach-s3c64xx/dev-audio.c @@ -54,12 +54,13 @@ static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev) static struct resource s3c64xx_iis0_resource[] = { [0] = DEFINE_RES_MEM(S3C64XX_PA_IIS0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S0_OUT), - [2] = DEFINE_RES_DMA(DMACH_I2S0_IN), }; -static struct s3c_audio_pdata i2sv3_pdata = { +static struct s3c_audio_pdata i2s0_pdata = { .cfg_gpio = s3c64xx_i2s_cfg_gpio, + .dma_filter = pl08x_filter_id, + .dma_playback = DMACH_I2S0_OUT, + .dma_capture = DMACH_I2S0_IN, }; struct platform_device s3c64xx_device_iis0 = { @@ -68,15 +69,20 @@ struct platform_device s3c64xx_device_iis0 = { .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource), .resource = s3c64xx_iis0_resource, .dev = { - .platform_data = &i2sv3_pdata, + .platform_data = &i2s0_pdata, }, }; EXPORT_SYMBOL(s3c64xx_device_iis0); static struct resource s3c64xx_iis1_resource[] = { [0] = DEFINE_RES_MEM(S3C64XX_PA_IIS1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S1_OUT), - [2] = DEFINE_RES_DMA(DMACH_I2S1_IN), +}; + +static struct s3c_audio_pdata i2s1_pdata = { + .cfg_gpio = s3c64xx_i2s_cfg_gpio, + .dma_filter = pl08x_filter_id, + .dma_playback = DMACH_I2S1_OUT, + .dma_capture = DMACH_I2S1_IN, }; struct platform_device s3c64xx_device_iis1 = { @@ -85,19 +91,20 @@ struct platform_device s3c64xx_device_iis1 = { .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource), .resource = s3c64xx_iis1_resource, .dev = { - .platform_data = &i2sv3_pdata, + .platform_data = &i2s1_pdata, }, }; EXPORT_SYMBOL(s3c64xx_device_iis1); static struct resource s3c64xx_iisv4_resource[] = { [0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_TX), - [2] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_RX), }; static struct s3c_audio_pdata i2sv4_pdata = { .cfg_gpio = s3c64xx_i2s_cfg_gpio, + .dma_filter = pl08x_filter_id, + .dma_playback = DMACH_HSI_I2SV40_TX, + .dma_capture = DMACH_HSI_I2SV40_RX, .type = { .i2s = { .quirks = QUIRK_PRI_6CHAN, @@ -142,12 +149,13 @@ static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev) static struct resource s3c64xx_pcm0_resource[] = { [0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), }; static struct s3c_audio_pdata s3c_pcm0_pdata = { .cfg_gpio = s3c64xx_pcm_cfg_gpio, + .dma_filter = pl08x_filter_id, + .dma_capture = DMACH_PCM0_RX, + .dma_playback = DMACH_PCM0_TX, }; struct platform_device s3c64xx_device_pcm0 = { @@ -163,12 +171,13 @@ EXPORT_SYMBOL(s3c64xx_device_pcm0); static struct resource s3c64xx_pcm1_resource[] = { [0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), }; static struct s3c_audio_pdata s3c_pcm1_pdata = { .cfg_gpio = s3c64xx_pcm_cfg_gpio, + .dma_filter = pl08x_filter_id, + .dma_playback = DMACH_PCM1_TX, + .dma_capture = DMACH_PCM1_RX, }; struct platform_device s3c64xx_device_pcm1 = { @@ -196,13 +205,15 @@ static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev) static struct resource s3c64xx_ac97_resource[] = { [0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), - [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), - [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), - [4] = DEFINE_RES_IRQ(IRQ_AC97), + [1] = DEFINE_RES_IRQ(IRQ_AC97), }; -static struct s3c_audio_pdata s3c_ac97_pdata; +static struct s3c_audio_pdata s3c_ac97_pdata = { + .dma_playback = DMACH_AC97_PCMOUT, + .dma_filter = pl08x_filter_id, + .dma_capture = DMACH_AC97_PCMIN, + .dma_capture_mic = DMACH_AC97_MICIN, +}; static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c index 46e18d77e..a0b4f0329 100644 --- a/arch/arm/mach-s3c64xx/dev-uart.c +++ b/arch/arm/mach-s3c64xx/dev-uart.c @@ -23,6 +23,7 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> #include <mach/map.h> +#include <mach/irqs.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S deleted file mode 100644 index c9b95325b..000000000 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/debug-macro.S - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <linux/serial_s3c.h> -#include <mach/map.h> - - /* note, for the boot process to work we have to keep the UART - * virtual address aligned to an 1MiB boundary for the L1 - * mapping the head code makes. We keep the UART virtual address - * aligned and add in the offset when we load the value here. - */ - - .macro addruart, rp, rv, tmp - ldr \rp, = S3C_PA_UART - ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <debug/samsung.S> diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index 096e14073..9c739eafe 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -14,38 +14,38 @@ #define S3C64XX_DMA_CHAN(name) ((unsigned long)(name)) /* DMA0/SDMA0 */ -#define DMACH_UART0 S3C64XX_DMA_CHAN("uart0_tx") -#define DMACH_UART0_SRC2 S3C64XX_DMA_CHAN("uart0_rx") -#define DMACH_UART1 S3C64XX_DMA_CHAN("uart1_tx") -#define DMACH_UART1_SRC2 S3C64XX_DMA_CHAN("uart1_rx") -#define DMACH_UART2 S3C64XX_DMA_CHAN("uart2_tx") -#define DMACH_UART2_SRC2 S3C64XX_DMA_CHAN("uart2_rx") -#define DMACH_UART3 S3C64XX_DMA_CHAN("uart3_tx") -#define DMACH_UART3_SRC2 S3C64XX_DMA_CHAN("uart3_rx") -#define DMACH_PCM0_TX S3C64XX_DMA_CHAN("pcm0_tx") -#define DMACH_PCM0_RX S3C64XX_DMA_CHAN("pcm0_rx") -#define DMACH_I2S0_OUT S3C64XX_DMA_CHAN("i2s0_tx") -#define DMACH_I2S0_IN S3C64XX_DMA_CHAN("i2s0_rx") +#define DMACH_UART0 "uart0_tx" +#define DMACH_UART0_SRC2 "uart0_rx" +#define DMACH_UART1 "uart1_tx" +#define DMACH_UART1_SRC2 "uart1_rx" +#define DMACH_UART2 "uart2_tx" +#define DMACH_UART2_SRC2 "uart2_rx" +#define DMACH_UART3 "uart3_tx" +#define DMACH_UART3_SRC2 "uart3_rx" +#define DMACH_PCM0_TX "pcm0_tx" +#define DMACH_PCM0_RX "pcm0_rx" +#define DMACH_I2S0_OUT "i2s0_tx" +#define DMACH_I2S0_IN "i2s0_rx" #define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx") #define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx") -#define DMACH_HSI_I2SV40_TX S3C64XX_DMA_CHAN("i2s2_tx") -#define DMACH_HSI_I2SV40_RX S3C64XX_DMA_CHAN("i2s2_rx") +#define DMACH_HSI_I2SV40_TX "i2s2_tx" +#define DMACH_HSI_I2SV40_RX "i2s2_rx" /* DMA1/SDMA1 */ -#define DMACH_PCM1_TX S3C64XX_DMA_CHAN("pcm1_tx") -#define DMACH_PCM1_RX S3C64XX_DMA_CHAN("pcm1_rx") -#define DMACH_I2S1_OUT S3C64XX_DMA_CHAN("i2s1_tx") -#define DMACH_I2S1_IN S3C64XX_DMA_CHAN("i2s1_rx") +#define DMACH_PCM1_TX "pcm1_tx" +#define DMACH_PCM1_RX "pcm1_rx" +#define DMACH_I2S1_OUT "i2s1_tx" +#define DMACH_I2S1_IN "i2s1_rx" #define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx") #define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx") -#define DMACH_AC97_PCMOUT S3C64XX_DMA_CHAN("ac97_out") -#define DMACH_AC97_PCMIN S3C64XX_DMA_CHAN("ac97_in") -#define DMACH_AC97_MICIN S3C64XX_DMA_CHAN("ac97_mic") -#define DMACH_PWM S3C64XX_DMA_CHAN("pwm") -#define DMACH_IRDA S3C64XX_DMA_CHAN("irda") -#define DMACH_EXTERNAL S3C64XX_DMA_CHAN("external") -#define DMACH_SECURITY_RX S3C64XX_DMA_CHAN("sec_rx") -#define DMACH_SECURITY_TX S3C64XX_DMA_CHAN("sec_tx") +#define DMACH_AC97_PCMOUT "ac97_out" +#define DMACH_AC97_PCMIN "ac97_in" +#define DMACH_AC97_MICIN "ac97_mic" +#define DMACH_PWM "pwm" +#define DMACH_IRDA "irda" +#define DMACH_EXTERNAL "external" +#define DMACH_SECURITY_RX "sec_rx" +#define DMACH_SECURITY_TX "sec_tx" enum dma_ch { DMACH_MAX = 32 diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h index 9c81fac3b..1d3636512 100644 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h @@ -14,6 +14,8 @@ #ifndef GPIO_SAMSUNG_S3C64XX_H #define GPIO_SAMSUNG_S3C64XX_H +#ifdef CONFIG_GPIO_SAMSUNG + /* GPIO bank sizes */ #define S3C64XX_GPIO_A_NR (8) #define S3C64XX_GPIO_B_NR (7) @@ -90,5 +92,6 @@ enum s3c_gpio_number { /* define the number of gpios we need to the one after the GPQ() range */ #define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) +#endif /* GPIO_SAMSUNG */ #endif /* GPIO_SAMSUNG_S3C64XX_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index 67bbd1dd0..3ceb00b5d 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -156,25 +156,11 @@ #define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no)) -/* Define a group of interrupts for board-specific use (eg, for MFD - * interrupt controllers). */ +/* Some boards have their own IRQs behind this */ #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) -#ifdef CONFIG_MACH_WLF_CRAGG_6410 -#define IRQ_BOARD_NR 160 -#elif defined(CONFIG_SMDK6410_WM1190_EV1) -#define IRQ_BOARD_NR 64 -#elif defined(CONFIG_SMDK6410_WM1192_EV1) -#define IRQ_BOARD_NR 64 -#else -#define IRQ_BOARD_NR 16 -#endif - -#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_BOARD_END + 1) +/* Set the default nr_irqs, boards can override if necessary */ +#define S3C64XX_NR_IRQS IRQ_BOARD_START /* Compatibility */ diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index a30a1e3ff..4a285e97a 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -16,8 +16,11 @@ #define __MACH_S3C64XX_PM_CORE_H __FILE__ #include <linux/serial_s3c.h> +#include <linux/delay.h> #include <mach/regs-gpio.h> +#include <mach/regs-clock.h> +#include <mach/map.h> static inline void s3c_pm_debug_init_uart(void) { @@ -56,9 +59,13 @@ static inline void s3c_pm_arch_show_resume_irqs(void) /* make these defines, we currently do not have any need to change * the IRQ wake controls depending on the CPU we are running on */ - +#ifdef CONFIG_PM_SLEEP #define s3c_irqwake_eintallow ((1 << 28) - 1) #define s3c_irqwake_intallow (~0) +#else +#define s3c_irqwake_eintallow 0 +#define s3c_irqwake_intallow 0 +#endif static inline void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index ae4ea7601..0bbf1faae 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -113,7 +113,7 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = { static __init int s3c64xx_syscore_init(void) { /* Appropriate drivers (pinctrl, uart) handle this when using DT. */ - if (of_have_populated_dt()) + if (of_have_populated_dt() || !soc_is_s3c64xx()) return 0; register_syscore_ops(&s3c64xx_irq_syscore_ops); diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 6224c67f5..347ce6009 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -47,6 +47,7 @@ #include <plat/devs.h> #include <plat/cpu.h> +#include <mach/irqs.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> #include <plat/samsung-time.h> @@ -229,7 +230,7 @@ static void __init anw6410_machine_init(void) MACHINE_START(ANW6410, "A&W6410") /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */ .atag_offset = 0x100, - + .nr_irqs = S3C64XX_NR_IRQS, .init_irq = s3c6410_init_irq, .map_io = anw6410_map_io, .init_machine = anw6410_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 9c00d83f7..571f95cc5 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -29,6 +29,9 @@ #include <linux/platform_data/spi-s3c64xx.h> +#include <plat/cpu.h> +#include <mach/irqs.h> + #include "crag6410.h" static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = { @@ -399,6 +402,9 @@ static struct i2c_driver wlf_gf_module_driver = { static int __init wlf_gf_module_register(void) { + if (!soc_is_s3c64xx()) + return 0; + return i2c_add_driver(&wlf_gf_module_driver); } device_initcall(wlf_gf_module_register); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index f776adcda..d9d0440ae 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -29,7 +29,7 @@ #include <linux/pwm_backlight.h> #include <linux/dm9000.h> #include <linux/gpio_keys.h> -#include <linux/basic_mmio_gpio.h> +#include <linux/gpio/driver.h> #include <linux/spi/spi.h> #include <linux/platform_data/pca953x.h> @@ -52,6 +52,7 @@ #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> +#include <mach/irqs.h> #include <plat/fb.h> #include <plat/sdhci.h> @@ -860,6 +861,7 @@ static void __init crag6410_machine_init(void) MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410") /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */ .atag_offset = 0x100, + .nr_irqs = S3C64XX_NR_IRQS, .init_irq = s3c6410_init_irq, .map_io = crag6410_map_io, .init_machine = crag6410_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 816b39d1e..bc7dc1fcb 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -31,6 +31,7 @@ #include <video/samsung_fimd.h> #include <mach/hardware.h> #include <mach/map.h> +#include <mach/irqs.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -279,6 +280,7 @@ static void __init hmt_machine_init(void) MACHINE_START(HMT, "Airgoo-HMT") /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */ .atag_offset = 0x100, + .nr_irqs = S3C64XX_NR_IRQS, .init_irq = s3c6410_init_irq, .map_io = hmt_map_io, .init_machine = hmt_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index ab61af50b..ae999fb3f 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -41,6 +41,7 @@ #include <linux/platform_data/mmc-sdhci-s3c.h> #include <plat/sdhci.h> #include <linux/platform_data/touchscreen-s3c2410.h> +#include <mach/irqs.h> #include <video/platform_lcd.h> #include <video/samsung_fimd.h> @@ -233,7 +234,6 @@ static struct platform_device *mini6410_devices[] __initdata = { &s3c_device_fb, &mini6410_lcd_powerdev, &s3c_device_adc, - &s3c_device_ts, }; static void __init mini6410_map_io(void) @@ -332,7 +332,7 @@ static void __init mini6410_machine_init(void) s3c_nand_set_platdata(&mini6410_nand_info); s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]); s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata); - s3c24xx_ts_set_platdata(NULL); + s3c64xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ @@ -363,6 +363,7 @@ static void __init mini6410_machine_init(void) MACHINE_START(MINI6410, "MINI6410") /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */ .atag_offset = 0x100, + .nr_irqs = S3C64XX_NR_IRQS, .init_irq = s3c6410_init_irq, .map_io = mini6410_map_io, .init_machine = mini6410_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 80cb1446f..23baaa043 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -31,6 +31,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <mach/irqs.h> #include <mach/hardware.h> #include <mach/map.h> @@ -100,6 +101,7 @@ static void __init ncp_machine_init(void) MACHINE_START(NCP, "NCP") /* Maintainer: Samsung Electronics */ .atag_offset = 0x100, + .nr_irqs = S3C64XX_NR_IRQS, .init_irq = s3c6410_init_irq, .map_io = ncp_map_io, .init_machine = ncp_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 85fa9598b..4e240ffa7 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -33,6 +33,7 @@ #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> +#include <mach/irqs.h> #include <plat/adc.h> #include <plat/cpu.h> @@ -202,7 +203,6 @@ static struct platform_device *real6410_devices[] __initdata = { &s3c_device_fb, &s3c_device_nand, &s3c_device_adc, - &s3c_device_ts, &s3c_device_ohci, }; @@ -301,7 +301,7 @@ static void __init real6410_machine_init(void) s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]); s3c_nand_set_platdata(&real6410_nand_info); - s3c24xx_ts_set_platdata(NULL); + s3c64xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ @@ -331,7 +331,7 @@ static void __init real6410_machine_init(void) MACHINE_START(REAL6410, "REAL6410") /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */ .atag_offset = 0x100, - + .nr_irqs = S3C64XX_NR_IRQS, .init_irq = s3c6410_init_irq, .map_io = real6410_map_io, .init_machine = real6410_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index acdfb5fac..936a63fc6 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -12,6 +12,7 @@ #include <linux/delay.h> #include <linux/fb.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/pwm.h> @@ -252,7 +253,6 @@ static struct platform_device *smartq_devices[] __initdata = { &s3c_device_ohci, &s3c_device_rtc, &samsung_device_pwm, - &s3c_device_ts, &s3c_device_usb_hsotg, &s3c64xx_device_iis0, &smartq_backlight_device, @@ -383,6 +383,15 @@ void __init smartq_map_io(void) smartq_lcd_mode_set(); } +static struct gpiod_lookup_table smartq_audio_gpios = { + .dev_id = "smartq-audio", + .table = { + GPIO_LOOKUP("GPL", 12, "headphone detect", 0), + GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0), + { }, + }, +}; + void __init smartq_machine_init(void) { s3c_i2c0_set_platdata(NULL); @@ -390,7 +399,7 @@ void __init smartq_machine_init(void) s3c_hwmon_set_platdata(&smartq_hwmon_pdata); s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata); s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata); - s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata); + s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata); i2c_register_board_info(0, smartq_i2c_devs, ARRAY_SIZE(smartq_i2c_devs)); @@ -402,4 +411,7 @@ void __init smartq_machine_init(void) pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup)); platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices)); + + gpiod_add_lookup_table(&smartq_audio_gpios); + platform_device_register_simple("smartq-audio", -1, NULL, 0); } diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index 33224ab36..0972b6ce0 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -21,6 +21,7 @@ #include <asm/mach/arch.h> #include <video/samsung_fimd.h> +#include <mach/irqs.h> #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> @@ -153,6 +154,7 @@ static void __init smartq5_machine_init(void) MACHINE_START(SMARTQ5, "SmartQ 5") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ .atag_offset = 0x100, + .nr_irqs = S3C64XX_NR_IRQS, .init_irq = s3c6410_init_irq, .map_io = smartq_map_io, .init_machine = smartq5_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index fc7fece22..51ac1c6c6 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -21,6 +21,7 @@ #include <asm/mach/arch.h> #include <video/samsung_fimd.h> +#include <mach/irqs.h> #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> @@ -169,6 +170,7 @@ static void __init smartq7_machine_init(void) MACHINE_START(SMARTQ7, "SmartQ 7") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ .atag_offset = 0x100, + .nr_irqs = S3C64XX_NR_IRQS, .init_irq = s3c6410_init_irq, .map_io = smartq_map_io, .init_machine = smartq7_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 6f425126a..7d8a74fd8 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -27,6 +27,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <mach/irqs.h> #include <mach/hardware.h> #include <mach/map.h> @@ -88,7 +89,7 @@ static void __init smdk6400_machine_init(void) MACHINE_START(SMDK6400, "SMDK6400") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - + .nr_irqs = S3C64XX_NR_IRQS, .init_irq = s3c6400_init_irq, .map_io = smdk6400_map_io, .init_machine = smdk6400_machine_init, diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 30fd27853..8a894ee3e 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -52,6 +52,7 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <mach/map.h> #include <asm/irq.h> @@ -289,7 +290,6 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_adc, &s3c_device_cfcon, &s3c_device_rtc, - &s3c_device_ts, &s3c_device_wdt, }; @@ -668,7 +668,7 @@ static void __init smdk6410_machine_init(void) samsung_keypad_set_platdata(&smdk6410_keypad_data); - s3c24xx_ts_set_platdata(NULL); + s3c64xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ @@ -707,7 +707,7 @@ static void __init smdk6410_machine_init(void) MACHINE_START(SMDK6410, "SMDK6410") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - + .nr_irqs = S3C64XX_NR_IRQS, .init_irq = s3c6410_init_irq, .map_io = smdk6410_map_io, .init_machine = smdk6410_machine_init, diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c index 901a984bd..89c5a6283 100644 --- a/arch/arm/mach-s3c64xx/pl080.c +++ b/arch/arm/mach-s3c64xx/pl080.c @@ -14,6 +14,7 @@ #include <linux/amba/pl08x.h> #include <linux/of.h> +#include <plat/cpu.h> #include <mach/irqs.h> #include <mach/map.h> @@ -230,6 +231,9 @@ static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0, static int __init s3c64xx_pl080_init(void) { + if (!soc_is_s3c64xx()) + return 0; + /* Set all DMA configuration to be DMA, not SDMA */ writel(0xffffff, S3C64XX_SDMA_SEL); diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 75b14e756..59d91b83b 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -22,6 +22,7 @@ #include <mach/map.h> #include <mach/irqs.h> +#include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> #include <plat/wakeup-mask.h> @@ -332,6 +333,9 @@ int __init s3c64xx_pm_init(void) static __init int s3c64xx_pm_initcall(void) { + if (!soc_is_s3c64xx()) + return 0; + pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 33273abef..5ea82accc 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -81,7 +81,7 @@ static struct device s3c6400_dev = { static int __init s3c6400_core_init(void) { /* Not applicable when using DT. */ - if (of_have_populated_dt()) + if (of_have_populated_dt() || soc_is_s3c64xx()) return 0; return subsys_system_register(&s3c6400_subsys, NULL); diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index eadc48dee..92bb927c4 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -84,7 +84,7 @@ static struct device s3c6410_dev = { static int __init s3c6410_core_init(void) { /* Not applicable when using DT. */ - if (of_have_populated_dt()) + if (of_have_populated_dt() || !soc_is_s3c64xx()) return 0; return subsys_system_register(&s3c6410_subsys, NULL); diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 330bfc8fc..13bc9820f 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -8,7 +8,8 @@ # Configuration options for the S5PV210/S5PC110 config ARCH_S5PV210 - bool "Samsung S5PV210/S5PC110" if ARCH_MULTI_V7 + bool "Samsung S5PV210/S5PC110" + depends on ARCH_MULTI_V7 select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_REQUIRE_GPIOLIB select ARM_VIC diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 41e476e57..d8965c682 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -98,8 +98,8 @@ static void cs3_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int cs3_gpio_get(struct gpio_chip *chip, unsigned offset) { if (offset > 15) - return simpad_get_cs3_ro() & (1 << (offset - 16)); - return simpad_get_cs3_shadow() & (1 << offset); + return !!(simpad_get_cs3_ro() & (1 << (offset - 16))); + return !!(simpad_get_cs3_shadow() & (1 << offset)); }; static int cs3_gpio_direction_input(struct gpio_chip *chip, unsigned offset) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 88734a5e1..cd5f171f8 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -1,6 +1,8 @@ config ARCH_SHMOBILE bool - select ZONE_DMA if ARM_LPAE + +config ARCH_SHMOBILE_MULTI + bool config PM_RCAR bool @@ -29,10 +31,11 @@ config ARCH_RMOBILE select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU -menuconfig ARCH_SHMOBILE_MULTI - bool "Renesas ARM SoCs" if ARCH_MULTI_V7 - depends on MMU +menuconfig ARCH_RENESAS + bool "Renesas ARM SoCs" + depends on ARCH_MULTI_V7 && MMU select ARCH_SHMOBILE + select ARCH_SHMOBILE_MULTI select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ARM_GIC @@ -40,8 +43,9 @@ menuconfig ARCH_SHMOBILE_MULTI select NO_IOPORT_MAP select PINCTRL select ARCH_REQUIRE_GPIOLIB + select ZONE_DMA if ARM_LPAE -if ARCH_SHMOBILE_MULTI +if ARCH_RENESAS #comment "Renesas ARM SoCs System Type" diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 9cb11215c..b3a4ed528 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -4,7 +4,6 @@ extern void shmobile_init_delay(void); extern void shmobile_boot_vector(void); extern unsigned long shmobile_boot_fn; -extern unsigned long shmobile_boot_arg; extern unsigned long shmobile_boot_size; extern void shmobile_smp_boot(void); extern void shmobile_smp_sleep(void); diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index fa5248c52..5e503d91a 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -38,9 +38,3 @@ ENTRY(shmobile_boot_scu) b secondary_startup ENDPROC(shmobile_boot_scu) - - .text - .align 2 - .globl shmobile_scu_base -shmobile_scu_base: - .space 4 diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 330c1fc63..32e0bf6e3 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -24,7 +24,6 @@ .arm .align 12 ENTRY(shmobile_boot_vector) - ldr r0, 2f ldr r1, 1f bx r1 @@ -34,9 +33,6 @@ ENDPROC(shmobile_boot_vector) .globl shmobile_boot_fn shmobile_boot_fn: 1: .space 4 - .globl shmobile_boot_arg -shmobile_boot_arg: -2: .space 4 .globl shmobile_boot_size shmobile_boot_size: .long . - shmobile_boot_vector @@ -46,13 +42,15 @@ shmobile_boot_size: */ ENTRY(shmobile_smp_boot) - @ r0 = MPIDR_HWID_BITMASK mrc p15, 0, r1, c0, c0, 5 @ r1 = MPIDR - and r0, r1, r0 @ r0 = cpu_logical_map() value + and r0, r1, #0xffffff @ MPIDR_HWID_BITMASK + @ r0 = cpu_logical_map() value mov r1, #0 @ r1 = CPU index - adr r5, 1f @ array of per-cpu mpidr values - adr r6, 2f @ array of per-cpu functions - adr r7, 3f @ array of per-cpu arguments + adr r2, 1f + ldmia r2, {r5, r6, r7} + add r5, r5, r2 @ array of per-cpu mpidr values + add r6, r6, r2 @ array of per-cpu functions + add r7, r7, r2 @ array of per-cpu arguments shmobile_smp_boot_find_mpidr: ldr r8, [r5, r1, lsl #2] @@ -80,12 +78,18 @@ ENTRY(shmobile_smp_sleep) b shmobile_smp_boot ENDPROC(shmobile_smp_sleep) + .align 2 +1: .long shmobile_smp_mpidr - . + .long shmobile_smp_fn - 1b + .long shmobile_smp_arg - 1b + + .bss .globl shmobile_smp_mpidr shmobile_smp_mpidr: -1: .space NR_CPUS * 4 + .space NR_CPUS * 4 .globl shmobile_smp_fn shmobile_smp_fn: -2: .space NR_CPUS * 4 + .space NR_CPUS * 4 .globl shmobile_smp_arg shmobile_smp_arg: -3: .space NR_CPUS * 4 + .space NR_CPUS * 4 diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h deleted file mode 100644 index 5aee83f07..000000000 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_MACH_IRQS_H -#define __ASM_MACH_IRQS_H - -/* Stuck here until drivers/pinctl/sh-pfc gets rid of legacy code */ - -/* External IRQ pins */ -#define IRQPIN_BASE 2000 -#define irq_pin(nr) ((nr) + IRQPIN_BASE) - -#endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-shmobile/irqs.h b/arch/arm/mach-shmobile/irqs.h deleted file mode 100644 index 3070f6d88..000000000 --- a/arch/arm/mach-shmobile/irqs.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __SHMOBILE_IRQS_H -#define __SHMOBILE_IRQS_H - -#include "include/mach/irqs.h" - -/* GIC */ -#define gic_spi(nr) ((nr) + 32) -#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */ - -/* GPIO IRQ */ -#define _GPIO_IRQ_BASE 2500 -#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x)) -#define GPIO_IRQ(x, y) (_GPIO_IRQ_BASE + (32 * x) + y) - -#endif /* __SHMOBILE_IRQS_H */ diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 911884f7e..aba75c89f 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -123,7 +123,6 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); - shmobile_boot_arg = MPIDR_HWID_BITMASK; /* perform per-cpu setup */ apmu_parse_cfg(apmu_init_cpu, apmu_config, num); diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c index 64663110a..081a097c9 100644 --- a/arch/arm/mach-shmobile/platsmp-scu.c +++ b/arch/arm/mach-shmobile/platsmp-scu.c @@ -17,6 +17,9 @@ #include <asm/smp_scu.h> #include "common.h" + +void __iomem *shmobile_scu_base; + static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, unsigned long action, void *hcpu) { @@ -41,7 +44,6 @@ void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus) { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); - shmobile_boot_arg = MPIDR_HWID_BITMASK; /* enable SCU and cache coherency on booting CPU */ scu_enable(shmobile_scu_base); diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h index e1aaa2ef9..2a5f7730a 100644 --- a/arch/arm/mach-shmobile/r8a7779.h +++ b/arch/arm/mach-shmobile/r8a7779.h @@ -3,6 +3,6 @@ extern void r8a7779_pm_init(void); -extern struct smp_operations r8a7779_smp_ops; +extern const struct smp_operations r8a7779_smp_ops; #endif /* __ASM_R8A7779_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h index 1a46d0260..136f3455e 100644 --- a/arch/arm/mach-shmobile/r8a7790.h +++ b/arch/arm/mach-shmobile/r8a7790.h @@ -1,6 +1,6 @@ #ifndef __ASM_R8A7790_H__ #define __ASM_R8A7790_H__ -extern struct smp_operations r8a7790_smp_ops; +extern const struct smp_operations r8a7790_smp_ops; #endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h index 7ca0b7d0f..cf7a8405b 100644 --- a/arch/arm/mach-shmobile/r8a7791.h +++ b/arch/arm/mach-shmobile/r8a7791.h @@ -1,6 +1,6 @@ #ifndef __ASM_R8A7791_H__ #define __ASM_R8A7791_H__ -extern struct smp_operations r8a7791_smp_ops; +extern const struct smp_operations r8a7791_smp_ops; #endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 37f7b15c0..10b7cb5dc 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -42,7 +42,7 @@ static const char *const emev2_boards_compat_dt[] __initconst = { NULL, }; -extern struct smp_operations emev2_smp_ops; +extern const struct smp_operations emev2_smp_ops; DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 0ab9d3272..fab95d127 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -22,7 +22,6 @@ #include <asm/mach/arch.h> #include "common.h" -#include "irqs.h" #define MODEMR 0xffcc0020 diff --git a/arch/arm/mach-shmobile/sh73a0.h b/arch/arm/mach-shmobile/sh73a0.h index 39646806c..50ef24f78 100644 --- a/arch/arm/mach-shmobile/sh73a0.h +++ b/arch/arm/mach-shmobile/sh73a0.h @@ -1,6 +1,6 @@ #ifndef __ASM_SH73A0_H__ #define __ASM_SH73A0_H__ -extern struct smp_operations sh73a0_smp_ops; +extern const struct smp_operations sh73a0_smp_ops; #endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index baff3b5ef..adbac6963 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -49,7 +49,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) shmobile_smp_scu_prepare_cpus(max_cpus); } -struct smp_operations emev2_smp_ops __initdata = { +const struct smp_operations emev2_smp_ops __initconst = { .smp_prepare_cpus = emev2_smp_prepare_cpus, .smp_boot_secondary = emev2_boot_secondary, }; diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 353562b8a..0b024a9db 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -92,8 +92,6 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { /* Map the reset vector (in headsmp-scu.S, headsmp.S) */ __raw_writel(__pa(shmobile_boot_vector), AVECR); - shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); - shmobile_boot_arg = (unsigned long)shmobile_scu_base; /* setup r8a7779 specific SCU bits */ shmobile_scu_base = IOMEM(R8A7779_SCU_BASE); @@ -117,7 +115,7 @@ static int r8a7779_cpu_kill(unsigned int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -struct smp_operations r8a7779_smp_ops __initdata = { +const struct smp_operations r8a7779_smp_ops __initconst = { .smp_prepare_cpus = r8a7779_smp_prepare_cpus, .smp_boot_secondary = r8a7779_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c index 4b33d432a..f6426c6fd 100644 --- a/arch/arm/mach-shmobile/smp-r8a7790.c +++ b/arch/arm/mach-shmobile/smp-r8a7790.c @@ -60,7 +60,7 @@ static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) rcar_sysc_power_up(&r8a7790_ca7_scu); } -struct smp_operations r8a7790_smp_ops __initdata = { +const struct smp_operations r8a7790_smp_ops __initconst = { .smp_prepare_cpus = r8a7790_smp_prepare_cpus, .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index b2508c0d2..2d6417af7 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -54,7 +54,7 @@ static int r8a7791_smp_boot_secondary(unsigned int cpu, return shmobile_smp_apmu_boot_secondary(cpu, idle); } -struct smp_operations r8a7791_smp_ops __initdata = { +const struct smp_operations r8a7791_smp_ops __initconst = { .smp_prepare_cpus = r8a7791_smp_prepare_cpus, .smp_boot_secondary = r8a7791_smp_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index bc2824a03..ee1a4b706 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -56,7 +56,7 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) shmobile_smp_scu_prepare_cpus(max_cpus); } -struct smp_operations sh73a0_smp_ops __initdata = { +const struct smp_operations sh73a0_smp_ops __initconst = { .smp_prepare_cpus = sh73a0_smp_prepare_cpus, .smp_boot_secondary = sh73a0_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 90efdeb56..d0f62eacf 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_SOCFPGA - bool "Altera SOCFPGA family" if ARCH_MULTI_V7 + bool "Altera SOCFPGA family" + depends on ARCH_MULTI_V7 select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 15c8ce896..cbb0a54df 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -117,7 +117,7 @@ static int socfpga_cpu_kill(unsigned int cpu) return 1; } -static struct smp_operations socfpga_smp_ops __initdata = { +static const struct smp_operations socfpga_smp_ops __initconst = { .smp_prepare_cpus = socfpga_smp_prepare_cpus, .smp_boot_secondary = socfpga_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU @@ -126,7 +126,7 @@ static struct smp_operations socfpga_smp_ops __initdata = { #endif }; -static struct smp_operations socfpga_a10_smp_ops __initdata = { +static const struct smp_operations socfpga_a10_smp_ops __initconst = { .smp_prepare_cpus = socfpga_smp_prepare_cpus, .smp_boot_secondary = socfpga_a10_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index b6f4bda27..ea9ea9563 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -3,7 +3,8 @@ # menuconfig PLAT_SPEAR - bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5 + bool "ST SPEAr Family" + depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h index 06640914d..909b97c0b 100644 --- a/arch/arm/mach-spear/generic.h +++ b/arch/arm/mach-spear/generic.h @@ -39,7 +39,7 @@ void spear_restart(enum reboot_mode, const char *); void spear13xx_secondary_startup(void); void spear13xx_cpu_die(unsigned int cpu); -extern struct smp_operations spear13xx_smp_ops; +extern const struct smp_operations spear13xx_smp_ops; #ifdef CONFIG_MACH_SPEAR1310 void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base); diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c index fd4297713..8d1e2d551 100644 --- a/arch/arm/mach-spear/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -120,7 +120,7 @@ static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus) __raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION); } -struct smp_operations spear13xx_smp_ops __initdata = { +const struct smp_operations spear13xx_smp_ops __initconst = { .smp_init_cpus = spear13xx_smp_init_cpus, .smp_prepare_cpus = spear13xx_smp_prepare_cpus, .smp_secondary_init = spear13xx_secondary_init, diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index 125865daa..a196d14f6 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,8 +1,10 @@ menuconfig ARCH_STI - bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7 + bool "STMicroelectronics Consumer Electronics SOCs" + depends on ARCH_MULTI_V7 select ARM_GIC select ST_IRQCHIP select ARM_GLOBAL_TIMER + select CLKSRC_ST_LPC select PINCTRL select PINCTRL_ST select MFD_SYSCON diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c index c4ad6eae6..ea5a2277e 100644 --- a/arch/arm/mach-sti/platsmp.c +++ b/arch/arm/mach-sti/platsmp.c @@ -156,7 +156,7 @@ static void __init sti_smp_prepare_cpus(unsigned int max_cpus) } } -struct smp_operations __initdata sti_smp_ops = { +const struct smp_operations sti_smp_ops __initconst = { .smp_prepare_cpus = sti_smp_prepare_cpus, .smp_secondary_init = sti_secondary_init, .smp_boot_secondary = sti_boot_secondary, diff --git a/arch/arm/mach-sti/smp.h b/arch/arm/mach-sti/smp.h index ae22707d3..d8a2f8758 100644 --- a/arch/arm/mach-sti/smp.h +++ b/arch/arm/mach-sti/smp.h @@ -12,7 +12,7 @@ #ifndef __MACH_STI_SMP_H #define __MACH_STI_SMP_H -extern struct smp_operations sti_smp_ops; +extern const struct smp_operations sti_smp_ops; void sti_secondary_startup(void); diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 4efe2d43a..c124d658b 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_SUNXI - bool "Allwinner SoCs" if ARCH_MULTI_V7 + bool "Allwinner SoCs" + depends on ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_RESET_CONTROLLER select CLKSRC_MMIO diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index e8483ec79..664226781 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -116,7 +116,7 @@ static int sun6i_smp_boot_secondary(unsigned int cpu, return 0; } -static struct smp_operations sun6i_smp_ops __initdata = { +static const struct smp_operations sun6i_smp_ops __initconst = { .smp_prepare_cpus = sun6i_smp_prepare_cpus, .smp_boot_secondary = sun6i_smp_boot_secondary, }; @@ -185,7 +185,7 @@ static int sun8i_smp_boot_secondary(unsigned int cpu, return 0; } -struct smp_operations sun8i_smp_ops __initdata = { +static const struct smp_operations sun8i_smp_ops __initconst = { .smp_prepare_cpus = sun8i_smp_prepare_cpus, .smp_boot_secondary = sun8i_smp_boot_secondary, }; diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig new file mode 100644 index 000000000..ebe15b93b --- /dev/null +++ b/arch/arm/mach-tango/Kconfig @@ -0,0 +1,13 @@ +config ARCH_TANGO + bool "Sigma Designs Tango4 (SMP87xx)" + depends on ARCH_MULTI_V7 + # Cortex-A9 MPCore r3p0, PL310 r3p2 + select ARCH_HAS_HOLES_MEMORYMODEL + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARM_ERRATA_775420 + select ARM_GIC + select CLKSRC_TANGO_XTAL + select HAVE_ARM_SCU + select HAVE_ARM_TWD + select TANGO_IRQ diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile new file mode 100644 index 000000000..f33935e42 --- /dev/null +++ b/arch/arm/mach-tango/Makefile @@ -0,0 +1,5 @@ +plus_sec := $(call as-instr,.arch_extension sec,+sec) +AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec) + +obj-y += setup.o smc.o +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c new file mode 100644 index 000000000..a21f55e00 --- /dev/null +++ b/arch/arm/mach-tango/platsmp.c @@ -0,0 +1,16 @@ +#include <linux/init.h> +#include <linux/smp.h> +#include "smc.h" + +static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + tango_set_aux_boot_addr(virt_to_phys(secondary_startup)); + tango_start_aux_core(cpu); + return 0; +} + +static const struct smp_operations tango_smp_ops __initconst = { + .smp_boot_secondary = tango_boot_secondary, +}; + +CPU_METHOD_OF_DECLARE(tango4_smp, "sigma,tango4-smp", &tango_smp_ops); diff --git a/arch/arm/mach-tango/setup.c b/arch/arm/mach-tango/setup.c new file mode 100644 index 000000000..f14b6c7d2 --- /dev/null +++ b/arch/arm/mach-tango/setup.c @@ -0,0 +1,17 @@ +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> +#include "smc.h" + +static void tango_l2c_write(unsigned long val, unsigned int reg) +{ + if (reg == L2X0_CTRL) + tango_set_l2_control(val); +} + +static const char *const tango_dt_compat[] = { "sigma,tango4", NULL }; + +DT_MACHINE_START(TANGO_DT, "Sigma Tango DT") + .dt_compat = tango_dt_compat, + .l2c_aux_mask = ~0, + .l2c_write_sec = tango_l2c_write, +MACHINE_END diff --git a/arch/arm/mach-tango/smc.S b/arch/arm/mach-tango/smc.S new file mode 100644 index 000000000..5d932ce3c --- /dev/null +++ b/arch/arm/mach-tango/smc.S @@ -0,0 +1,9 @@ +#include <linux/linkage.h> + +ENTRY(tango_smc) + push {lr} + mov ip, r1 + dsb /* This barrier is probably unnecessary */ + smc #0 + pop {pc} +ENDPROC(tango_smc) diff --git a/arch/arm/mach-tango/smc.h b/arch/arm/mach-tango/smc.h new file mode 100644 index 000000000..7a4af35cc --- /dev/null +++ b/arch/arm/mach-tango/smc.h @@ -0,0 +1,5 @@ +extern int tango_smc(unsigned int val, unsigned int service); + +#define tango_set_l2_control(val) tango_smc(val, 0x102) +#define tango_start_aux_core(val) tango_smc(val, 0x104) +#define tango_set_aux_boot_addr(val) tango_smc((unsigned int)val, 0x105) diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 0fa4c5f8b..0fa8b84ed 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_TEGRA - bool "NVIDIA Tegra" if ARCH_MULTI_V7 + bool "NVIDIA Tegra" + depends on ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARM_AMBA @@ -12,57 +13,5 @@ menuconfig ARCH_TEGRA select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER select SOC_BUS - select USB_ULPI if USB_PHY - select USB_ULPI_VIEWPORT if USB_PHY help This enables support for NVIDIA Tegra based systems. - -if ARCH_TEGRA - -config ARCH_TEGRA_2x_SOC - bool "Enable support for Tegra20 family" - select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP - select ARM_ERRATA_720789 - select ARM_ERRATA_754327 if SMP - select ARM_ERRATA_764369 if SMP - select PINCTRL_TEGRA20 - select PL310_ERRATA_727915 if CACHE_L2X0 - select PL310_ERRATA_769419 if CACHE_L2X0 - select TEGRA_TIMER - help - Support for NVIDIA Tegra AP20 and T20 processors, based on the - ARM CortexA9MP CPU and the ARM PL310 L2 cache controller - -config ARCH_TEGRA_3x_SOC - bool "Enable support for Tegra30 family" - select ARM_ERRATA_754322 - select ARM_ERRATA_764369 if SMP - select PINCTRL_TEGRA30 - select PL310_ERRATA_769419 if CACHE_L2X0 - select TEGRA_TIMER - help - Support for NVIDIA Tegra T30 processor family, based on the - ARM CortexA9MP CPU and the ARM PL310 L2 cache controller - -config ARCH_TEGRA_114_SOC - bool "Enable support for Tegra114 family" - select ARM_ERRATA_798181 if SMP - select ARM_L1_CACHE_SHIFT_6 - select HAVE_ARM_ARCH_TIMER - select PINCTRL_TEGRA114 - select TEGRA_TIMER - help - Support for NVIDIA Tegra T114 processor family, based on the - ARM CortexA15MP CPU - -config ARCH_TEGRA_124_SOC - bool "Enable support for Tegra124 family" - select ARM_L1_CACHE_SHIFT_6 - select HAVE_ARM_ARCH_TIMER - select PINCTRL_TEGRA124 - select TEGRA_TIMER - help - Support for NVIDIA Tegra T124 processor family, based on the - ARM CortexA15MP CPU - -endif diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h index 5900cc44f..1f6fb808e 100644 --- a/arch/arm/mach-tegra/common.h +++ b/arch/arm/mach-tegra/common.h @@ -1,4 +1,4 @@ -extern struct smp_operations tegra_smp_ops; +extern const struct smp_operations tegra_smp_ops; extern int tegra_cpu_kill(unsigned int cpu); extern void tegra_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index b45086666..f3f61dbbd 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -192,7 +192,7 @@ static void __init tegra_smp_prepare_cpus(unsigned int max_cpus) scu_enable(IO_ADDRESS(scu_a9_get_base())); } -struct smp_operations tegra_smp_ops __initdata = { +const struct smp_operations tegra_smp_ops __initconst = { .smp_prepare_cpus = tegra_smp_prepare_cpus, .smp_secondary_init = tegra_secondary_init, .smp_boot_secondary = tegra_boot_secondary, diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index e6b684e14..f5d196674 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -231,8 +231,11 @@ ENDPROC(tegra20_cpu_is_resettable_soon) * tegra20_tear_down_core in IRAM */ ENTRY(tegra20_sleep_core_finish) + mov r4, r0 /* Flush, disable the L1 data cache and exit SMP */ + mov r0, #TEGRA_FLUSH_CACHE_ALL bl tegra_disable_clean_inv_dcache + mov r0, r4 mov32 r3, tegra_shut_off_mmu add r3, r3, r0 diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 9a2f0b051..16e5ff033 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -242,8 +242,11 @@ ENDPROC(tegra30_cpu_shutdown) * tegra30_tear_down_core in IRAM */ ENTRY(tegra30_sleep_core_finish) + mov r4, r0 /* Flush, disable the L1 data cache and exit SMP */ + mov r0, #TEGRA_FLUSH_CACHE_ALL bl tegra_disable_clean_inv_dcache + mov r0, r4 /* * Preload all the address literals that are needed for the diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index bc51a7139..301a98498 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,6 +1,6 @@ menuconfig ARCH_U300 - bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5 - depends on MMU + bool "ST-Ericsson U300 Series" + depends on ARCH_MULTI_V5 && MMU select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index b640458fd..82dddee3a 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -6,6 +6,7 @@ config ARCH_UNIPHIER select ARM_GIC select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP + select PINCTRL help Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c index f05776646..e1cfc1d6e 100644 --- a/arch/arm/mach-uniphier/platsmp.c +++ b/arch/arm/mach-uniphier/platsmp.c @@ -201,7 +201,7 @@ static int __init uniphier_smp_boot_secondary(unsigned int cpu, return 0; } -static struct smp_operations uniphier_smp_ops __initdata = { +static const struct smp_operations uniphier_smp_ops __initconst = { .smp_prepare_cpus = uniphier_smp_prepare_cpus, .smp_boot_secondary = uniphier_smp_boot_secondary, }; diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c9ac19b24..3185081bd 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,6 +1,6 @@ menuconfig ARCH_U8500 - bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7 - depends on MMU + bool "ST-Ericsson U8500 Series" + depends on ARCH_MULTI_V7 && MMU select AB8500_CORE select ABX500_CORE select ARCH_REQUIRE_GPIOLIB @@ -32,6 +32,7 @@ config UX500_SOC_DB8500 select PINCTRL_AB8540 select REGULATOR select REGULATOR_DB8500_PRCMU + select CLKSRC_DBX500_PRCMU select PM_GENERIC_DOMAINS if PM config MACH_MOP500 diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index c8643ac5d..edfff1ae1 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := cpu.o id.o timer.o pm.o +obj-y := cpu.o id.o pm.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \ diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index f80560318..a0ffaad1f 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -156,8 +156,6 @@ static const char * stericsson_dt_platform_compat[] = { DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") .map_io = u8500_map_io, .init_irq = ux500_init_irq, - /* we re-use nomadik timer here */ - .init_time = ux500_timer_init, .init_machine = u8500_init_machine, .init_late = NULL, .dt_compat = stericsson_dt_platform_compat, diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 41b81c4fb..82156cbc2 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -9,7 +9,6 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mfd/dbx500-prcmu.h> -#include <linux/clksrc-dbx500-prcmu.h> #include <linux/sys_soc.h> #include <linux/err.h> #include <linux/slab.h> diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 70766b963..88b8ab4f3 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -98,7 +98,7 @@ static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } -struct smp_operations ux500_smp_ops __initdata = { +static const struct smp_operations ux500_smp_ops __initconst = { .smp_prepare_cpus = ux500_smp_prepare_cpus, .smp_boot_secondary = ux500_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index 65876eac0..c704254ab 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -12,7 +12,6 @@ #define __ASM_ARCH_SETUP_H #include <asm/mach/arch.h> -#include <asm/mach/time.h> #include <linux/init.h> #include <linux/mfd/abx500/ab8500.h> @@ -24,8 +23,6 @@ extern void __init ux500_init_irq(void); extern struct device *ux500_soc_device_init(const char *soc_id); -extern void ux500_timer_init(void); - extern void ux500_cpu_die(unsigned int cpu); #endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c deleted file mode 100644 index 8d2d233f8..000000000 --- a/arch/arm/mach-ux500/timer.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * License Terms: GNU General Public License v2 - * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson - */ -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/clksrc-dbx500-prcmu.h> -#include <linux/clocksource.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include "setup.h" - -#include "db8500-regs.h" -#include "id.h" - -static const struct of_device_id prcmu_timer_of_match[] __initconst = { - { .compatible = "stericsson,db8500-prcmu-timer-4", }, - { }, -}; - -void __init ux500_timer_init(void) -{ - void __iomem *prcmu_timer_base; - void __iomem *tmp_base; - struct device_node *np; - - if (cpu_is_u8500_family() || cpu_is_ux540_family()) - prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE); - else - ux500_unknown_soc(); - - np = of_find_matching_node(NULL, prcmu_timer_of_match); - if (!np) - goto dt_fail; - - tmp_base = of_iomap(np, 0); - if (!tmp_base) - goto dt_fail; - - prcmu_timer_base = tmp_base; - -dt_fail: - clksrc_dbx500_prcmu_init(prcmu_timer_base); - clocksource_probe(); -} diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index 1dba36882..e40f777cc 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -1,33 +1,16 @@ -menu "Versatile platform type" - depends on ARCH_VERSATILE - -config ARCH_VERSATILE_PB - bool "Support Versatile Platform Baseboard for ARM926EJ-S" - default y +config ARCH_VERSATILE + bool "ARM Ltd. Versatile family" + depends on ARCH_MULTI_V5 + select ARM_AMBA + select ARM_TIMER_SP804 + select ARM_VIC + select CLKSRC_VERSATILE + select COMMON_CLK_VERSATILE select CPU_ARM926T + select ICST select MIGHT_HAVE_PCI + select PLAT_VERSATILE + select VERSATILE_FPGA_IRQ help - Include support for the ARM(R) Versatile Platform Baseboard - for the ARM926EJ-S. - -config MACH_VERSATILE_AB - bool "Support Versatile Application Baseboard for ARM926EJ-S" - select CPU_ARM926T - help - Include support for the ARM(R) Versatile Application Baseboard - for the ARM926EJ-S. - -config MACH_VERSATILE_DT - bool "Support Versatile platform from device tree" - select CPU_ARM926T - select USE_OF - help - Include support for the ARM(R) Versatile/PB platform, - using the device tree for discovery - -config MACH_VERSATILE_AUTO - def_bool y - depends on !ARCH_VERSATILE_PB && !MACH_VERSATILE_AB - select MACH_VERSATILE_DT + This enables support for ARM Ltd Versatile board. -endmenu diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index 81fa3fe25..41b124b51 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -2,8 +2,4 @@ # Makefile for the linux kernel. # -obj-y := core.o -obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o -obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o -obj-$(CONFIG_MACH_VERSATILE_DT) += versatile_dt.o -obj-$(CONFIG_PCI) += pci.o +obj-y := versatile_dt.o diff --git a/arch/arm/mach-versatile/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot deleted file mode 100644 index ff0a4b5b0..000000000 --- a/arch/arm/mach-versatile/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 - diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c deleted file mode 100644 index 23a04fe5d..000000000 --- a/arch/arm/mach-versatile/core.c +++ /dev/null @@ -1,808 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/core.c - * - * Copyright (C) 1999 - 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/irqdomain.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/platform_data/video-clcd-versatile.h> -#include <linux/amba/pl061.h> -#include <linux/amba/mmci.h> -#include <linux/amba/pl022.h> -#include <linux/io.h> -#include <linux/irqchip/arm-vic.h> -#include <linux/irqchip/versatile-fpga.h> -#include <linux/gfp.h> -#include <linux/clkdev.h> -#include <linux/mtd/physmap.h> -#include <linux/bitops.h> -#include <linux/reboot.h> - -#include <clocksource/timer-sp804.h> - -#include <asm/irq.h> -#include <asm/hardware/icst.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/platform.h> - -#include <plat/sched_clock.h> - -#include "core.h" - -/* - * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx - * is the (PA >> 12). - * - * Setup a VA for the Versatile Vectored Interrupt Controller. - */ -#define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE) -#define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE) - -/* These PIC IRQs are valid in each configuration */ -#define PIC_VALID_ALL BIT(SIC_INT_KMI0) | BIT(SIC_INT_KMI1) | \ - BIT(SIC_INT_SCI3) | BIT(SIC_INT_UART3) | \ - BIT(SIC_INT_CLCD) | BIT(SIC_INT_TOUCH) | \ - BIT(SIC_INT_KEYPAD) | BIT(SIC_INT_DoC) | \ - BIT(SIC_INT_USB) | BIT(SIC_INT_PCI0) | \ - BIT(SIC_INT_PCI1) | BIT(SIC_INT_PCI2) | \ - BIT(SIC_INT_PCI3) -#if 1 -#define IRQ_MMCI0A IRQ_VICSOURCE22 -#define IRQ_AACI IRQ_VICSOURCE24 -#define IRQ_ETH IRQ_VICSOURCE25 -#define PIC_MASK 0xFFD00000 -#define PIC_VALID PIC_VALID_ALL -#else -#define IRQ_MMCI0A IRQ_SIC_MMCI0A -#define IRQ_AACI IRQ_SIC_AACI -#define IRQ_ETH IRQ_SIC_ETH -#define PIC_MASK 0 -#define PIC_VALID PIC_VALID_ALL | BIT(SIC_INT_MMCI0A) | \ - BIT(SIC_INT_MMCI1A) | BIT(SIC_INT_AACI) | \ - BIT(SIC_INT_ETH) -#endif - -/* Lookup table for finding a DT node that represents the vic instance */ -static const struct of_device_id vic_of_match[] __initconst = { - { .compatible = "arm,versatile-vic", }, - {} -}; - -static const struct of_device_id sic_of_match[] __initconst = { - { .compatible = "arm,versatile-sic", }, - {} -}; - -void __init versatile_init_irq(void) -{ - struct device_node *np; - - np = of_find_matching_node_by_address(NULL, vic_of_match, - VERSATILE_VIC_BASE); - __vic_init(VA_VIC_BASE, 0, IRQ_VIC_START, ~0, 0, np); - - writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR); - - np = of_find_matching_node_by_address(NULL, sic_of_match, - VERSATILE_SIC_BASE); - - fpga_irq_init(VA_SIC_BASE, "SIC", IRQ_SIC_START, - IRQ_VICSOURCE31, PIC_VALID, np); - - /* - * Interrupts on secondary controller from 0 to 8 are routed to - * source 31 on PIC. - * Interrupts from 21 to 31 are routed directly to the VIC on - * the corresponding number on primary controller. This is controlled - * by setting PIC_ENABLEx. - */ - writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE); -} - -static struct map_desc versatile_io_desc[] __initdata __maybe_unused = { - { - .virtual = IO_ADDRESS(VERSATILE_SYS_BASE), - .pfn = __phys_to_pfn(VERSATILE_SYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(VERSATILE_SIC_BASE), - .pfn = __phys_to_pfn(VERSATILE_SIC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(VERSATILE_VIC_BASE), - .pfn = __phys_to_pfn(VERSATILE_VIC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE), - .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE), - .length = SZ_4K * 9, - .type = MT_DEVICE - }, -#ifdef CONFIG_MACH_VERSATILE_AB - { - .virtual = IO_ADDRESS(VERSATILE_IB2_BASE), - .pfn = __phys_to_pfn(VERSATILE_IB2_BASE), - .length = SZ_64M, - .type = MT_DEVICE - }, -#endif -#ifdef CONFIG_DEBUG_LL - { - .virtual = IO_ADDRESS(VERSATILE_UART0_BASE), - .pfn = __phys_to_pfn(VERSATILE_UART0_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, -#endif -#ifdef CONFIG_PCI - { - .virtual = IO_ADDRESS(VERSATILE_PCI_CORE_BASE), - .pfn = __phys_to_pfn(VERSATILE_PCI_CORE_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = (unsigned long)VERSATILE_PCI_VIRT_BASE, - .pfn = __phys_to_pfn(VERSATILE_PCI_BASE), - .length = VERSATILE_PCI_BASE_SIZE, - .type = MT_DEVICE - }, { - .virtual = (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE, - .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE), - .length = VERSATILE_PCI_CFG_BASE_SIZE, - .type = MT_DEVICE - }, -#endif -}; - -void __init versatile_map_io(void) -{ - iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc)); -} - - -#define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET) - -static void versatile_flash_set_vpp(struct platform_device *pdev, int on) -{ - u32 val; - - val = __raw_readl(VERSATILE_FLASHCTRL); - if (on) - val |= VERSATILE_FLASHPROG_FLVPPEN; - else - val &= ~VERSATILE_FLASHPROG_FLVPPEN; - __raw_writel(val, VERSATILE_FLASHCTRL); -} - -static struct physmap_flash_data versatile_flash_data = { - .width = 4, - .set_vpp = versatile_flash_set_vpp, -}; - -static struct resource versatile_flash_resource = { - .start = VERSATILE_FLASH_BASE, - .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device versatile_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &versatile_flash_data, - }, - .num_resources = 1, - .resource = &versatile_flash_resource, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = VERSATILE_ETH_BASE, - .end = VERSATILE_ETH_BASE + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_ETH, - .end = IRQ_ETH, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource versatile_i2c_resource = { - .start = VERSATILE_I2C_BASE, - .end = VERSATILE_I2C_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device versatile_i2c_device = { - .name = "versatile-i2c", - .id = 0, - .num_resources = 1, - .resource = &versatile_i2c_resource, -}; - -static struct i2c_board_info versatile_i2c_board_info[] = { - { - I2C_BOARD_INFO("ds1338", 0xd0 >> 1), - }, -}; - -static int __init versatile_i2c_init(void) -{ - return i2c_register_board_info(0, versatile_i2c_board_info, - ARRAY_SIZE(versatile_i2c_board_info)); -} -arch_initcall(versatile_i2c_init); - -#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET) - -unsigned int mmc_status(struct device *dev) -{ - struct amba_device *adev = container_of(dev, struct amba_device, dev); - u32 mask; - - if (adev->res.start == VERSATILE_MMCI0_BASE) - mask = 1; - else - mask = 2; - - return readl(VERSATILE_SYSMCI) & mask; -} - -static struct mmci_platform_data mmc0_plat_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .status = mmc_status, - .gpio_wp = -1, - .gpio_cd = -1, -}; - -static struct resource char_lcd_resources[] = { - { - .start = VERSATILE_CHAR_LCD_BASE, - .end = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device char_lcd_device = { - .name = "arm-charlcd", - .id = -1, - .num_resources = ARRAY_SIZE(char_lcd_resources), - .resource = char_lcd_resources, -}; - -static struct resource leds_resources[] = { - { - .start = VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET, - .end = VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET + 4, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device leds_device = { - .name = "versatile-leds", - .id = -1, - .num_resources = ARRAY_SIZE(leds_resources), - .resource = leds_resources, -}; - -/* - * Clock handling - */ -static const struct icst_params versatile_oscvco_params = { - .ref = 24000000, - .vco_max = ICST307_VCO_MAX, - .vco_min = ICST307_VCO_MIN, - .vd_min = 4 + 8, - .vd_max = 511 + 8, - .rd_min = 1 + 2, - .rd_max = 127 + 2, - .s2div = icst307_s2div, - .idx2s = icst307_idx2s, -}; - -static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco) -{ - void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET; - u32 val; - - val = readl(clk->vcoreg) & ~0x7ffff; - val |= vco.v | (vco.r << 9) | (vco.s << 16); - - writel(0xa05f, sys_lock); - writel(val, clk->vcoreg); - writel(0, sys_lock); -} - -static const struct clk_ops osc4_clk_ops = { - .round = icst_clk_round, - .set = icst_clk_set, - .setvco = versatile_oscvco_set, -}; - -static struct clk osc4_clk = { - .ops = &osc4_clk_ops, - .params = &versatile_oscvco_params, -}; - -/* - * These are fixed clocks. - */ -static struct clk ref24_clk = { - .rate = 24000000, -}; - -static struct clk sp804_clk = { - .rate = 1000000, -}; - -static struct clk dummy_apb_pclk; - -static struct clk_lookup lookups[] = { - { /* AMBA bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { /* UART0 */ - .dev_id = "dev:f1", - .clk = &ref24_clk, - }, { /* UART1 */ - .dev_id = "dev:f2", - .clk = &ref24_clk, - }, { /* UART2 */ - .dev_id = "dev:f3", - .clk = &ref24_clk, - }, { /* UART3 */ - .dev_id = "fpga:09", - .clk = &ref24_clk, - }, { /* KMI0 */ - .dev_id = "fpga:06", - .clk = &ref24_clk, - }, { /* KMI1 */ - .dev_id = "fpga:07", - .clk = &ref24_clk, - }, { /* MMC0 */ - .dev_id = "fpga:05", - .clk = &ref24_clk, - }, { /* MMC1 */ - .dev_id = "fpga:0b", - .clk = &ref24_clk, - }, { /* SSP */ - .dev_id = "dev:f4", - .clk = &ref24_clk, - }, { /* CLCD */ - .dev_id = "dev:20", - .clk = &osc4_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .clk = &sp804_clk, - }, -}; - -/* - * CLCD support. - */ -#define SYS_CLCD_MODE_MASK (3 << 0) -#define SYS_CLCD_MODE_888 (0 << 0) -#define SYS_CLCD_MODE_5551 (1 << 0) -#define SYS_CLCD_MODE_565_RLSB (2 << 0) -#define SYS_CLCD_MODE_565_BLSB (3 << 0) -#define SYS_CLCD_NLCDIOON (1 << 2) -#define SYS_CLCD_VDDPOSSWITCH (1 << 3) -#define SYS_CLCD_PWR3V5SWITCH (1 << 4) -#define SYS_CLCD_ID_MASK (0x1f << 8) -#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) -#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8) -#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) -#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) -#define SYS_CLCD_ID_VGA (0x1f << 8) - -static bool is_sanyo_2_5_lcd; - -/* - * Disable all display connectors on the interface module. - */ -static void versatile_clcd_disable(struct clcd_fb *fb) -{ - void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; - u32 val; - - val = readl(sys_clcd); - val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; - writel(val, sys_clcd); - -#ifdef CONFIG_MACH_VERSATILE_AB - /* - * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off - */ - if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) { - void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); - unsigned long ctrl; - - ctrl = readl(versatile_ib2_ctrl); - ctrl &= ~0x01; - writel(ctrl, versatile_ib2_ctrl); - } -#endif -} - -/* - * Enable the relevant connector on the interface module. - */ -static void versatile_clcd_enable(struct clcd_fb *fb) -{ - struct fb_var_screeninfo *var = &fb->fb.var; - void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; - u32 val; - - val = readl(sys_clcd); - val &= ~SYS_CLCD_MODE_MASK; - - switch (var->green.length) { - case 5: - val |= SYS_CLCD_MODE_5551; - break; - case 6: - if (var->red.offset == 0) - val |= SYS_CLCD_MODE_565_RLSB; - else - val |= SYS_CLCD_MODE_565_BLSB; - break; - case 8: - val |= SYS_CLCD_MODE_888; - break; - } - - /* - * Set the MUX - */ - writel(val, sys_clcd); - - /* - * And now enable the PSUs - */ - val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; - writel(val, sys_clcd); - -#ifdef CONFIG_MACH_VERSATILE_AB - /* - * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on - */ - if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) { - void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); - unsigned long ctrl; - - ctrl = readl(versatile_ib2_ctrl); - ctrl |= 0x01; - writel(ctrl, versatile_ib2_ctrl); - } -#endif -} - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static int versatile_clcd_setup(struct clcd_fb *fb) -{ - void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; - const char *panel_name; - u32 val; - - is_sanyo_2_5_lcd = false; - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel_name = "Sanyo TM38QV67A02A"; - else if (val == SYS_CLCD_ID_SANYO_2_5) { - panel_name = "Sanyo QVGA Portrait"; - is_sanyo_2_5_lcd = true; - } else if (val == SYS_CLCD_ID_EPSON_2_2) - panel_name = "Epson L2F50113T00"; - else if (val == SYS_CLCD_ID_VGA) - panel_name = "VGA"; - else { - printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", - val); - panel_name = "VGA"; - } - - fb->panel = versatile_clcd_get_panel(panel_name); - if (!fb->panel) - return -EINVAL; - - return versatile_clcd_setup_dma(fb, SZ_1M); -} - -static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) -{ - clcdfb_decode(fb, regs); - - /* Always clear BGR for RGB565: we do the routing externally */ - if (fb->fb.var.green.length == 6) - regs->cntl &= ~CNTL_BGR; -} - -static struct clcd_board clcd_plat_data = { - .name = "Versatile", - .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, - .check = clcdfb_check, - .decode = versatile_clcd_decode, - .disable = versatile_clcd_disable, - .enable = versatile_clcd_enable, - .setup = versatile_clcd_setup, - .mmap = versatile_clcd_mmap_dma, - .remove = versatile_clcd_remove_dma, -}; - -static struct pl061_platform_data gpio0_plat_data = { - .gpio_base = 0, - .irq_base = IRQ_GPIO0_START, -}; - -static struct pl061_platform_data gpio1_plat_data = { - .gpio_base = 8, - .irq_base = IRQ_GPIO1_START, -}; - -static struct pl061_platform_data gpio2_plat_data = { - .gpio_base = 16, - .irq_base = IRQ_GPIO2_START, -}; - -static struct pl061_platform_data gpio3_plat_data = { - .gpio_base = 24, - .irq_base = IRQ_GPIO3_START, -}; - -static struct pl022_ssp_controller ssp0_plat_data = { - .bus_id = 0, - .enable_dma = 0, - .num_chipselect = 1, -}; - -#define AACI_IRQ { IRQ_AACI } -#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } -#define KMI0_IRQ { IRQ_SIC_KMI0 } -#define KMI1_IRQ { IRQ_SIC_KMI1 } - -/* - * These devices are connected directly to the multi-layer AHB switch - */ -#define SMC_IRQ { } -#define MPMC_IRQ { } -#define CLCD_IRQ { IRQ_CLCDINT } -#define DMAC_IRQ { IRQ_DMAINT } - -/* - * These devices are connected via the core APB bridge - */ -#define SCTL_IRQ { } -#define WATCHDOG_IRQ { IRQ_WDOGINT } -#define GPIO0_IRQ { IRQ_GPIOINT0 } -#define GPIO1_IRQ { IRQ_GPIOINT1 } -#define GPIO2_IRQ { IRQ_GPIOINT2 } -#define GPIO3_IRQ { IRQ_GPIOINT3 } -#define RTC_IRQ { IRQ_RTCINT } - -/* - * These devices are connected via the DMA APB bridge - */ -#define SCI_IRQ { IRQ_SCIINT } -#define UART0_IRQ { IRQ_UARTINT0 } -#define UART1_IRQ { IRQ_UARTINT1 } -#define UART2_IRQ { IRQ_UARTINT2 } -#define SSP_IRQ { IRQ_SSPINT } - -/* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:04", AACI, NULL); -APB_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:06", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:07", KMI1, NULL); - -/* DevChip Primecells */ -AHB_DEVICE(smc, "dev:00", SMC, NULL); -AHB_DEVICE(mpmc, "dev:10", MPMC, NULL); -AHB_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); -AHB_DEVICE(dmac, "dev:30", DMAC, NULL); -APB_DEVICE(sctl, "dev:e0", SCTL, NULL); -APB_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); -APB_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); -APB_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); -APB_DEVICE(rtc, "dev:e8", RTC, NULL); -APB_DEVICE(sci0, "dev:f0", SCI, NULL); -APB_DEVICE(uart0, "dev:f1", UART0, NULL); -APB_DEVICE(uart1, "dev:f2", UART1, NULL); -APB_DEVICE(uart2, "dev:f3", UART2, NULL); -APB_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); - -static struct amba_device *amba_devs[] __initdata = { - &dmac_device, - &uart0_device, - &uart1_device, - &uart2_device, - &smc_device, - &mpmc_device, - &clcd_device, - &sctl_device, - &wdog_device, - &gpio0_device, - &gpio1_device, - &gpio2_device, - &gpio3_device, - &rtc_device, - &sci0_device, - &ssp0_device, - &aaci_device, - &mmc0_device, - &kmi0_device, - &kmi1_device, -}; - -#ifdef CONFIG_OF -/* - * Lookup table for attaching a specific name and platform_data pointer to - * devices as they get created by of_platform_populate(). Ideally this table - * would not exist, but the current clock implementation depends on some devices - * having a specific name. - */ -struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL), - /* FIXME: this is buggy, the platform data is needed for this MMC instance too */ - OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL), - - OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", &ssp0_plat_data), - -#if 0 - /* - * These entries are unnecessary because no clocks referencing - * them. I've left them in for now as place holders in case - * any of them need to be added back, but they should be - * removed before actually committing this patch. --gcl - */ - OF_DEV_AUXDATA("arm,primecell", VERSATILE_AACI_BASE, "fpga:04", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI1_BASE, "fpga:0a", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_SMC_BASE, "dev:00", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_MPMC_BASE, "dev:10", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_DMAC_BASE, "dev:30", NULL), - - OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCTL_BASE, "dev:e0", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_WATCHDOG_BASE, "dev:e1", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO0_BASE, "dev:e4", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO1_BASE, "dev:e5", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO2_BASE, "dev:e6", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO3_BASE, "dev:e7", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_RTC_BASE, "dev:e8", NULL), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI_BASE, "dev:f0", NULL), -#endif - {} -}; -#endif - -void versatile_restart(enum reboot_mode mode, const char *cmd) -{ - void __iomem *sys = __io_address(VERSATILE_SYS_BASE); - u32 val; - - val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET); - val |= 0x105; - - __raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET); - __raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET); - __raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET); -} - -/* Early initializations */ -void __init versatile_init_early(void) -{ - u32 val; - void __iomem *sys = __io_address(VERSATILE_SYS_BASE); - - osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET; - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000); - - /* - * set clock frequency: - * VERSATILE_REFCLK is 32KHz - * VERSATILE_TIMCLK is 1MHz - */ - val = readl(__io_address(VERSATILE_SCTL_BASE)); - writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, - __io_address(VERSATILE_SCTL_BASE)); -} - -void __init versatile_init(void) -{ - int i; - - platform_device_register(&versatile_flash_device); - platform_device_register(&versatile_i2c_device); - platform_device_register(&smc91x_device); - platform_device_register(&char_lcd_device); - platform_device_register(&leds_device); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } -} - -/* - * Where is the timer (VA)? - */ -#define TIMER0_VA_BASE __io_address(VERSATILE_TIMER0_1_BASE) -#define TIMER1_VA_BASE (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20) -#define TIMER2_VA_BASE __io_address(VERSATILE_TIMER2_3_BASE) -#define TIMER3_VA_BASE (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20) - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -void __init versatile_timer_init(void) -{ - - /* - * Initialise to a known state (all timers off) - */ - sp804_timer_disable(TIMER0_VA_BASE); - sp804_timer_disable(TIMER1_VA_BASE); - sp804_timer_disable(TIMER2_VA_BASE); - sp804_timer_disable(TIMER3_VA_BASE); - - sp804_clocksource_init(TIMER3_VA_BASE, "timer3"); - sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0"); -} diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h deleted file mode 100644 index f06d5768e..000000000 --- a/arch/arm/mach-versatile/core.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/core.h - * - * Copyright (C) 2004 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_VERSATILE_H -#define __ASM_ARCH_VERSATILE_H - -#include <linux/amba/bus.h> -#include <linux/of_platform.h> -#include <linux/reboot.h> - -extern void __init versatile_init(void); -extern void __init versatile_init_early(void); -extern void __init versatile_init_irq(void); -extern void __init versatile_map_io(void); -extern void versatile_timer_init(void); -extern void versatile_restart(enum reboot_mode, const char *); -extern unsigned int mmc_status(struct device *dev); -#ifdef CONFIG_OF -extern struct of_dev_auxdata versatile_auxdata_lookup[]; -#endif - -#define APB_DEVICE(name, busid, base, plat) \ -static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) - -#define AHB_DEVICE(name, busid, base, plat) \ -static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) - -#endif diff --git a/arch/arm/mach-versatile/include/mach/clkdev.h b/arch/arm/mach-versatile/include/mach/clkdev.h deleted file mode 100644 index e58d0771b..000000000 --- a/arch/arm/mach-versatile/include/mach/clkdev.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#include <plat/clock.h> - -struct clk { - unsigned long rate; - const struct clk_ops *ops; - const struct icst_params *params; - void __iomem *vcoreg; -}; - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h deleted file mode 100644 index 3e5d425e2..000000000 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/hardware.h - * - * This file contains the hardware definitions of the Versatile boards. - * - * Copyright (C) 2003 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> - -/* - * PCI space virtual addresses - */ -#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul -#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul - -/* macro to get at MMIO space when running virtually */ -#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) - -#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) - -#endif diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h deleted file mode 100644 index 0fd771ca6..000000000 --- a/arch/arm/mach-versatile/include/mach/irqs.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/irqs.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <mach/platform.h> - -/* - * IRQ interrupts definitions are the same as the INT definitions - * held within platform.h - */ -#define IRQ_VIC_START 32 -#define IRQ_WDOGINT (IRQ_VIC_START + INT_WDOGINT) -#define IRQ_SOFTINT (IRQ_VIC_START + INT_SOFTINT) -#define IRQ_COMMRx (IRQ_VIC_START + INT_COMMRx) -#define IRQ_COMMTx (IRQ_VIC_START + INT_COMMTx) -#define IRQ_TIMERINT0_1 (IRQ_VIC_START + INT_TIMERINT0_1) -#define IRQ_TIMERINT2_3 (IRQ_VIC_START + INT_TIMERINT2_3) -#define IRQ_GPIOINT0 (IRQ_VIC_START + INT_GPIOINT0) -#define IRQ_GPIOINT1 (IRQ_VIC_START + INT_GPIOINT1) -#define IRQ_GPIOINT2 (IRQ_VIC_START + INT_GPIOINT2) -#define IRQ_GPIOINT3 (IRQ_VIC_START + INT_GPIOINT3) -#define IRQ_RTCINT (IRQ_VIC_START + INT_RTCINT) -#define IRQ_SSPINT (IRQ_VIC_START + INT_SSPINT) -#define IRQ_UARTINT0 (IRQ_VIC_START + INT_UARTINT0) -#define IRQ_UARTINT1 (IRQ_VIC_START + INT_UARTINT1) -#define IRQ_UARTINT2 (IRQ_VIC_START + INT_UARTINT2) -#define IRQ_SCIINT (IRQ_VIC_START + INT_SCIINT) -#define IRQ_CLCDINT (IRQ_VIC_START + INT_CLCDINT) -#define IRQ_DMAINT (IRQ_VIC_START + INT_DMAINT) -#define IRQ_PWRFAILINT (IRQ_VIC_START + INT_PWRFAILINT) -#define IRQ_MBXINT (IRQ_VIC_START + INT_MBXINT) -#define IRQ_GNDINT (IRQ_VIC_START + INT_GNDINT) -#define IRQ_VICSOURCE21 (IRQ_VIC_START + INT_VICSOURCE21) -#define IRQ_VICSOURCE22 (IRQ_VIC_START + INT_VICSOURCE22) -#define IRQ_VICSOURCE23 (IRQ_VIC_START + INT_VICSOURCE23) -#define IRQ_VICSOURCE24 (IRQ_VIC_START + INT_VICSOURCE24) -#define IRQ_VICSOURCE25 (IRQ_VIC_START + INT_VICSOURCE25) -#define IRQ_VICSOURCE26 (IRQ_VIC_START + INT_VICSOURCE26) -#define IRQ_VICSOURCE27 (IRQ_VIC_START + INT_VICSOURCE27) -#define IRQ_VICSOURCE28 (IRQ_VIC_START + INT_VICSOURCE28) -#define IRQ_VICSOURCE29 (IRQ_VIC_START + INT_VICSOURCE29) -#define IRQ_VICSOURCE30 (IRQ_VIC_START + INT_VICSOURCE30) -#define IRQ_VICSOURCE31 (IRQ_VIC_START + INT_VICSOURCE31) -#define IRQ_VIC_END (IRQ_VIC_START + 31) - -/* - * FIQ interrupts definitions are the same as the INT definitions. - */ -#define FIQ_WDOGINT INT_WDOGINT -#define FIQ_SOFTINT INT_SOFTINT -#define FIQ_COMMRx INT_COMMRx -#define FIQ_COMMTx INT_COMMTx -#define FIQ_TIMERINT0_1 INT_TIMERINT0_1 -#define FIQ_TIMERINT2_3 INT_TIMERINT2_3 -#define FIQ_GPIOINT0 INT_GPIOINT0 -#define FIQ_GPIOINT1 INT_GPIOINT1 -#define FIQ_GPIOINT2 INT_GPIOINT2 -#define FIQ_GPIOINT3 INT_GPIOINT3 -#define FIQ_RTCINT INT_RTCINT -#define FIQ_SSPINT INT_SSPINT -#define FIQ_UARTINT0 INT_UARTINT0 -#define FIQ_UARTINT1 INT_UARTINT1 -#define FIQ_UARTINT2 INT_UARTINT2 -#define FIQ_SCIINT INT_SCIINT -#define FIQ_CLCDINT INT_CLCDINT -#define FIQ_DMAINT INT_DMAINT -#define FIQ_PWRFAILINT INT_PWRFAILINT -#define FIQ_MBXINT INT_MBXINT -#define FIQ_GNDINT INT_GNDINT -#define FIQ_VICSOURCE21 INT_VICSOURCE21 -#define FIQ_VICSOURCE22 INT_VICSOURCE22 -#define FIQ_VICSOURCE23 INT_VICSOURCE23 -#define FIQ_VICSOURCE24 INT_VICSOURCE24 -#define FIQ_VICSOURCE25 INT_VICSOURCE25 -#define FIQ_VICSOURCE26 INT_VICSOURCE26 -#define FIQ_VICSOURCE27 INT_VICSOURCE27 -#define FIQ_VICSOURCE28 INT_VICSOURCE28 -#define FIQ_VICSOURCE29 INT_VICSOURCE29 -#define FIQ_VICSOURCE30 INT_VICSOURCE30 -#define FIQ_VICSOURCE31 INT_VICSOURCE31 - - -/* - * Secondary interrupt controller - */ -#define IRQ_SIC_START 64 -#define IRQ_SIC_MMCI0B (IRQ_SIC_START + SIC_INT_MMCI0B) -#define IRQ_SIC_MMCI1B (IRQ_SIC_START + SIC_INT_MMCI1B) -#define IRQ_SIC_KMI0 (IRQ_SIC_START + SIC_INT_KMI0) -#define IRQ_SIC_KMI1 (IRQ_SIC_START + SIC_INT_KMI1) -#define IRQ_SIC_SCI3 (IRQ_SIC_START + SIC_INT_SCI3) -#define IRQ_SIC_UART3 (IRQ_SIC_START + SIC_INT_UART3) -#define IRQ_SIC_CLCD (IRQ_SIC_START + SIC_INT_CLCD) -#define IRQ_SIC_TOUCH (IRQ_SIC_START + SIC_INT_TOUCH) -#define IRQ_SIC_KEYPAD (IRQ_SIC_START + SIC_INT_KEYPAD) -#define IRQ_SIC_DoC (IRQ_SIC_START + SIC_INT_DoC) -#define IRQ_SIC_MMCI0A (IRQ_SIC_START + SIC_INT_MMCI0A) -#define IRQ_SIC_MMCI1A (IRQ_SIC_START + SIC_INT_MMCI1A) -#define IRQ_SIC_AACI (IRQ_SIC_START + SIC_INT_AACI) -#define IRQ_SIC_ETH (IRQ_SIC_START + SIC_INT_ETH) -#define IRQ_SIC_USB (IRQ_SIC_START + SIC_INT_USB) -#define IRQ_SIC_PCI0 (IRQ_SIC_START + SIC_INT_PCI0) -#define IRQ_SIC_PCI1 (IRQ_SIC_START + SIC_INT_PCI1) -#define IRQ_SIC_PCI2 (IRQ_SIC_START + SIC_INT_PCI2) -#define IRQ_SIC_PCI3 (IRQ_SIC_START + SIC_INT_PCI3) -#define IRQ_SIC_END 95 - -#define IRQ_GPIO0_START (IRQ_SIC_END + 1) -#define IRQ_GPIO0_END (IRQ_GPIO0_START + 31) -#define IRQ_GPIO1_START (IRQ_GPIO0_END + 1) -#define IRQ_GPIO1_END (IRQ_GPIO1_START + 31) -#define IRQ_GPIO2_START (IRQ_GPIO1_END + 1) -#define IRQ_GPIO2_END (IRQ_GPIO2_START + 31) -#define IRQ_GPIO3_START (IRQ_GPIO2_END + 1) -#define IRQ_GPIO3_END (IRQ_GPIO3_START + 31) - -#define NR_IRQS (IRQ_GPIO3_END + 1) diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h deleted file mode 100644 index 6f938ccb0..000000000 --- a/arch/arm/mach-versatile/include/mach/platform.h +++ /dev/null @@ -1,416 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/platform.h - * - * Copyright (c) ARM Limited 2003. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __address_h -#define __address_h 1 - -/* - * Memory definitions - */ -#define VERSATILE_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/ -#define VERSATILE_BOOT_ROM_HI 0x30000000 -#define VERSATILE_BOOT_ROM_BASE VERSATILE_BOOT_ROM_HI /* Normal position */ -#define VERSATILE_BOOT_ROM_SIZE SZ_64M - -#define VERSATILE_SSRAM_BASE /* VERSATILE_SSMC_BASE ? */ -#define VERSATILE_SSRAM_SIZE SZ_2M - -#define VERSATILE_FLASH_BASE 0x34000000 -#define VERSATILE_FLASH_SIZE SZ_64M - -/* - * SDRAM - */ -#define VERSATILE_SDRAM_BASE 0x00000000 - -/* - * Logic expansion modules - * - */ - - -/* ------------------------------------------------------------------------ - * Versatile Registers - * ------------------------------------------------------------------------ - * - */ -#define VERSATILE_SYS_ID_OFFSET 0x00 -#define VERSATILE_SYS_SW_OFFSET 0x04 -#define VERSATILE_SYS_LED_OFFSET 0x08 -#define VERSATILE_SYS_OSC0_OFFSET 0x0C - -#if defined(CONFIG_ARCH_VERSATILE_PB) -#define VERSATILE_SYS_OSC1_OFFSET 0x10 -#define VERSATILE_SYS_OSC2_OFFSET 0x14 -#define VERSATILE_SYS_OSC3_OFFSET 0x18 -#define VERSATILE_SYS_OSC4_OFFSET 0x1C -#elif defined(CONFIG_MACH_VERSATILE_AB) -#define VERSATILE_SYS_OSC1_OFFSET 0x1C -#endif - -#define VERSATILE_SYS_OSCCLCD_OFFSET 0x1c - -#define VERSATILE_SYS_LOCK_OFFSET 0x20 -#define VERSATILE_SYS_100HZ_OFFSET 0x24 -#define VERSATILE_SYS_CFGDATA1_OFFSET 0x28 -#define VERSATILE_SYS_CFGDATA2_OFFSET 0x2C -#define VERSATILE_SYS_FLAGS_OFFSET 0x30 -#define VERSATILE_SYS_FLAGSSET_OFFSET 0x30 -#define VERSATILE_SYS_FLAGSCLR_OFFSET 0x34 -#define VERSATILE_SYS_NVFLAGS_OFFSET 0x38 -#define VERSATILE_SYS_NVFLAGSSET_OFFSET 0x38 -#define VERSATILE_SYS_NVFLAGSCLR_OFFSET 0x3C -#define VERSATILE_SYS_RESETCTL_OFFSET 0x40 -#define VERSATILE_SYS_PCICTL_OFFSET 0x44 -#define VERSATILE_SYS_MCI_OFFSET 0x48 -#define VERSATILE_SYS_FLASH_OFFSET 0x4C -#define VERSATILE_SYS_CLCD_OFFSET 0x50 -#define VERSATILE_SYS_CLCDSER_OFFSET 0x54 -#define VERSATILE_SYS_BOOTCS_OFFSET 0x58 -#define VERSATILE_SYS_24MHz_OFFSET 0x5C -#define VERSATILE_SYS_MISC_OFFSET 0x60 -#define VERSATILE_SYS_TEST_OSC0_OFFSET 0x80 -#define VERSATILE_SYS_TEST_OSC1_OFFSET 0x84 -#define VERSATILE_SYS_TEST_OSC2_OFFSET 0x88 -#define VERSATILE_SYS_TEST_OSC3_OFFSET 0x8C -#define VERSATILE_SYS_TEST_OSC4_OFFSET 0x90 - -#define VERSATILE_SYS_BASE 0x10000000 -#define VERSATILE_SYS_ID (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET) -#define VERSATILE_SYS_SW (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET) -#define VERSATILE_SYS_LED (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET) -#define VERSATILE_SYS_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET) -#define VERSATILE_SYS_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET) - -#if defined(CONFIG_ARCH_VERSATILE_PB) -#define VERSATILE_SYS_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET) -#define VERSATILE_SYS_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET) -#define VERSATILE_SYS_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET) -#endif - -#define VERSATILE_SYS_LOCK (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET) -#define VERSATILE_SYS_100HZ (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET) -#define VERSATILE_SYS_CFGDATA1 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET) -#define VERSATILE_SYS_CFGDATA2 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET) -#define VERSATILE_SYS_FLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET) -#define VERSATILE_SYS_FLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET) -#define VERSATILE_SYS_FLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET) -#define VERSATILE_SYS_NVFLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET) -#define VERSATILE_SYS_NVFLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET) -#define VERSATILE_SYS_NVFLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET) -#define VERSATILE_SYS_RESETCTL (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET) -#define VERSATILE_SYS_PCICTL (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET) -#define VERSATILE_SYS_MCI (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET) -#define VERSATILE_SYS_FLASH (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET) -#define VERSATILE_SYS_CLCD (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET) -#define VERSATILE_SYS_CLCDSER (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET) -#define VERSATILE_SYS_BOOTCS (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET) -#define VERSATILE_SYS_24MHz (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET) -#define VERSATILE_SYS_MISC (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET) -#define VERSATILE_SYS_TEST_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET) -#define VERSATILE_SYS_TEST_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET) -#define VERSATILE_SYS_TEST_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET) -#define VERSATILE_SYS_TEST_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET) -#define VERSATILE_SYS_TEST_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET) - -/* - * Values for VERSATILE_SYS_RESET_CTRL - */ -#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR 0x01 -#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT 0x02 -#define VERSATILE_SYS_CTRL_RESET_DLLRESET 0x03 -#define VERSATILE_SYS_CTRL_RESET_PLLRESET 0x04 -#define VERSATILE_SYS_CTRL_RESET_POR 0x05 -#define VERSATILE_SYS_CTRL_RESET_DoC 0x06 - -#define VERSATILE_SYS_CTRL_LED (1 << 0) - - -/* ------------------------------------------------------------------------ - * Versatile control registers - * ------------------------------------------------------------------------ - */ - -/* - * VERSATILE_IDFIELD - * - * 31:24 = manufacturer (0x41 = ARM) - * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus) - * 15:12 = FPGA (0x3 = XVC600 or XVC600E) - * 11:4 = build value - * 3:0 = revision number (0x1 = rev B (AHB)) - */ - -/* - * VERSATILE_SYS_LOCK - * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, - * SYS_CLD, SYS_BOOTCS - */ -#define VERSATILE_SYS_LOCK_LOCKED (1 << 16) -#define VERSATILE_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */ - -/* - * VERSATILE_SYS_FLASH - */ -#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */ - -/* - * VERSATILE_INTREG - * - used to acknowledge and control MMCI and UART interrupts - */ -#define VERSATILE_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */ -#define VERSATILE_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */ -#define VERSATILE_INTREG_CARDIN 0x08 /* MMCI card in detect */ - /* write 1 to acknowledge and clear */ -#define VERSATILE_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */ -#define VERSATILE_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ - -/* - * VERSATILE peripheral addresses - */ -#define VERSATILE_PCI_CORE_BASE 0x10001000 /* PCI core control */ -#define VERSATILE_I2C_BASE 0x10002000 /* I2C control */ -#define VERSATILE_SIC_BASE 0x10003000 /* Secondary interrupt controller */ -#define VERSATILE_AACI_BASE 0x10004000 /* Audio */ -#define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */ -#define VERSATILE_KMI0_BASE 0x10006000 /* KMI interface */ -#define VERSATILE_KMI1_BASE 0x10007000 /* KMI 2nd interface */ -#define VERSATILE_CHAR_LCD_BASE 0x10008000 /* Character LCD */ -#define VERSATILE_UART3_BASE 0x10009000 /* UART 3 */ -#define VERSATILE_SCI1_BASE 0x1000A000 -#define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */ - /* 0x1000C000 - 0x1000CFFF = reserved */ -#define VERSATILE_ETH_BASE 0x10010000 /* Ethernet */ -#define VERSATILE_USB_BASE 0x10020000 /* USB */ - /* 0x10030000 - 0x100FFFFF = reserved */ -#define VERSATILE_SMC_BASE 0x10100000 /* SMC */ -#define VERSATILE_MPMC_BASE 0x10110000 /* MPMC */ -#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */ -#define VERSATILE_DMAC_BASE 0x10130000 /* DMA controller */ -#define VERSATILE_VIC_BASE 0x10140000 /* Vectored interrupt controller */ -#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */ - /* 0x10000000 - 0x100FFFFF */ -#define VERSATILE_AHBM_BASE 0x101D0000 /* AHB monitor */ -#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ -#define VERSATILE_WATCHDOG_BASE 0x101E1000 /* Watchdog */ -#define VERSATILE_TIMER0_1_BASE 0x101E2000 /* Timer 0 and 1 */ -#define VERSATILE_TIMER2_3_BASE 0x101E3000 /* Timer 2 and 3 */ -#define VERSATILE_GPIO0_BASE 0x101E4000 /* GPIO port 0 */ -#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */ -#define VERSATILE_GPIO2_BASE 0x101E6000 /* GPIO port 2 */ -#define VERSATILE_GPIO3_BASE 0x101E7000 /* GPIO port 3 */ -#define VERSATILE_RTC_BASE 0x101E8000 /* Real Time Clock */ - /* 0x101E9000 - reserved */ -#define VERSATILE_SCI_BASE 0x101F0000 /* Smart card controller */ -#define VERSATILE_UART0_BASE 0x101F1000 /* Uart 0 */ -#define VERSATILE_UART1_BASE 0x101F2000 /* Uart 1 */ -#define VERSATILE_UART2_BASE 0x101F3000 /* Uart 2 */ -#define VERSATILE_SSP_BASE 0x101F4000 /* Synchronous Serial Port */ - -#define VERSATILE_SSMC_BASE 0x20000000 /* SSMC */ -#define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */ -#define VERSATILE_MBX_BASE 0x40000000 /* MBX */ - -/* PCI space */ -#define VERSATILE_PCI_BASE 0x41000000 /* PCI Interface */ -#define VERSATILE_PCI_CFG_BASE 0x42000000 -#define VERSATILE_PCI_IO_BASE 0x43000000 -#define VERSATILE_PCI_MEM_BASE0 0x44000000 -#define VERSATILE_PCI_MEM_BASE1 0x50000000 -#define VERSATILE_PCI_MEM_BASE2 0x60000000 -/* Sizes of above maps */ -#define VERSATILE_PCI_BASE_SIZE 0x01000000 -#define VERSATILE_PCI_CFG_BASE_SIZE 0x02000000 -#define VERSATILE_PCI_IO_BASE_SIZE 0x01000000 -#define VERSATILE_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ -#define VERSATILE_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ -#define VERSATILE_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ - -#define VERSATILE_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ -#define VERSATILE_LT_BASE 0x80000000 /* Logic Tile expansion */ - -/* - * Disk on Chip - */ -#define VERSATILE_DOC_BASE 0x2C000000 -#define VERSATILE_DOC_SIZE (16 << 20) -#define VERSATILE_DOC_PAGE_SIZE 512 -#define VERSATILE_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE) - -#define ERASE_UNIT_PAGES 32 -#define START_PAGE 0x80 - -/* - * LED settings, bits [7:0] - */ -#define VERSATILE_SYS_LED0 (1 << 0) -#define VERSATILE_SYS_LED1 (1 << 1) -#define VERSATILE_SYS_LED2 (1 << 2) -#define VERSATILE_SYS_LED3 (1 << 3) -#define VERSATILE_SYS_LED4 (1 << 4) -#define VERSATILE_SYS_LED5 (1 << 5) -#define VERSATILE_SYS_LED6 (1 << 6) -#define VERSATILE_SYS_LED7 (1 << 7) - -#define ALL_LEDS 0xFF - -#define LED_BANK VERSATILE_SYS_LED - -/* - * Control registers - */ -#define VERSATILE_IDFIELD_OFFSET 0x0 /* Versatile build information */ -#define VERSATILE_FLASHPROG_OFFSET 0x4 /* Flash devices */ -#define VERSATILE_INTREG_OFFSET 0x8 /* Interrupt control */ -#define VERSATILE_DECODE_OFFSET 0xC /* Fitted logic modules */ - - -/* ------------------------------------------------------------------------ - * Versatile Interrupt Controller - control registers - * ------------------------------------------------------------------------ - * - * Offsets from interrupt controller base - * - * System Controller interrupt controller base is - * - * VERSATILE_IC_BASE - * - * Core Module interrupt controller base is - * - * VERSATILE_SYS_IC - * - */ -/* VIC definitions in include/asm-arm/hardware/vic.h */ - -#define SIC_IRQ_STATUS 0 -#define SIC_IRQ_RAW_STATUS 0x04 -#define SIC_IRQ_ENABLE 0x08 -#define SIC_IRQ_ENABLE_SET 0x08 -#define SIC_IRQ_ENABLE_CLEAR 0x0C -#define SIC_INT_SOFT_SET 0x10 -#define SIC_INT_SOFT_CLEAR 0x14 -#define SIC_INT_PIC_ENABLE 0x20 /* read status of pass through mask */ -#define SIC_INT_PIC_ENABLES 0x20 /* set interrupt pass through bits */ -#define SIC_INT_PIC_ENABLEC 0x24 /* Clear interrupt pass through bits */ - -/* ------------------------------------------------------------------------ - * Interrupts - bit assignment (primary) - * ------------------------------------------------------------------------ - */ - -#define INT_WDOGINT 0 /* Watchdog timer */ -#define INT_SOFTINT 1 /* Software interrupt */ -#define INT_COMMRx 2 /* Debug Comm Rx interrupt */ -#define INT_COMMTx 3 /* Debug Comm Tx interrupt */ -#define INT_TIMERINT0_1 4 /* Timer 0 and 1 */ -#define INT_TIMERINT2_3 5 /* Timer 2 and 3 */ -#define INT_GPIOINT0 6 /* GPIO 0 */ -#define INT_GPIOINT1 7 /* GPIO 1 */ -#define INT_GPIOINT2 8 /* GPIO 2 */ -#define INT_GPIOINT3 9 /* GPIO 3 */ -#define INT_RTCINT 10 /* Real Time Clock */ -#define INT_SSPINT 11 /* Synchronous Serial Port */ -#define INT_UARTINT0 12 /* UART 0 on development chip */ -#define INT_UARTINT1 13 /* UART 1 on development chip */ -#define INT_UARTINT2 14 /* UART 2 on development chip */ -#define INT_SCIINT 15 /* Smart Card Interface */ -#define INT_CLCDINT 16 /* CLCD controller */ -#define INT_DMAINT 17 /* DMA controller */ -#define INT_PWRFAILINT 18 /* Power failure */ -#define INT_MBXINT 19 /* Graphics processor */ -#define INT_GNDINT 20 /* Reserved */ - /* External interrupt signals from logic tiles or secondary controller */ -#define INT_VICSOURCE21 21 /* Disk on Chip */ -#define INT_VICSOURCE22 22 /* MCI0A */ -#define INT_VICSOURCE23 23 /* MCI1A */ -#define INT_VICSOURCE24 24 /* AACI */ -#define INT_VICSOURCE25 25 /* Ethernet */ -#define INT_VICSOURCE26 26 /* USB */ -#define INT_VICSOURCE27 27 /* PCI 0 */ -#define INT_VICSOURCE28 28 /* PCI 1 */ -#define INT_VICSOURCE29 29 /* PCI 2 */ -#define INT_VICSOURCE30 30 /* PCI 3 */ -#define INT_VICSOURCE31 31 /* SIC source */ - -#define VERSATILE_SC_VALID_INT 0x003FFFFF - -#define MAXIRQNUM 31 -#define MAXFIQNUM 31 -#define MAXSWINUM 31 - -/* ------------------------------------------------------------------------ - * Interrupts - bit assignment (secondary) - * ------------------------------------------------------------------------ - */ -#define SIC_INT_MMCI0B 1 /* Multimedia Card 0B */ -#define SIC_INT_MMCI1B 2 /* Multimedia Card 1B */ -#define SIC_INT_KMI0 3 /* Keyboard/Mouse port 0 */ -#define SIC_INT_KMI1 4 /* Keyboard/Mouse port 1 */ -#define SIC_INT_SCI3 5 /* Smart Card interface */ -#define SIC_INT_UART3 6 /* UART 3 empty or data available */ -#define SIC_INT_CLCD 7 /* Character LCD */ -#define SIC_INT_TOUCH 8 /* Touchscreen */ -#define SIC_INT_KEYPAD 9 /* Key pressed on display keypad */ - /* 10:20 - reserved */ -#define SIC_INT_DoC 21 /* Disk on Chip memory controller */ -#define SIC_INT_MMCI0A 22 /* MMC 0A */ -#define SIC_INT_MMCI1A 23 /* MMC 1A */ -#define SIC_INT_AACI 24 /* Audio Codec */ -#define SIC_INT_ETH 25 /* Ethernet controller */ -#define SIC_INT_USB 26 /* USB controller */ -#define SIC_INT_PCI0 27 -#define SIC_INT_PCI1 28 -#define SIC_INT_PCI2 29 -#define SIC_INT_PCI3 30 - - -/* - * System controller bit assignment - */ -#define VERSATILE_REFCLK 0 -#define VERSATILE_TIMCLK 1 - -#define VERSATILE_TIMER1_EnSel 15 -#define VERSATILE_TIMER2_EnSel 17 -#define VERSATILE_TIMER3_EnSel 19 -#define VERSATILE_TIMER4_EnSel 21 - - -#define VERSATILE_CSR_BASE 0x10000000 -#define VERSATILE_CSR_SIZE 0x10000000 - -#ifdef CONFIG_MACH_VERSATILE_AB -/* - * IB2 Versatile/AB expansion board definitions - */ -#define VERSATILE_IB2_CAMERA_BANK VERSATILE_IB2_BASE -#define VERSATILE_IB2_KBD_DATAREG (VERSATILE_IB2_BASE + 0x01000000) - -/* VICINTSOURCE27 */ -#define VERSATILE_IB2_INT_BASE (VERSATILE_IB2_BASE + 0x02000000) -#define VERSATILE_IB2_IER (VERSATILE_IB2_INT_BASE + 0) -#define VERSATILE_IB2_ISR (VERSATILE_IB2_INT_BASE + 4) - -#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000) -#define VERSATILE_IB2_CTRL (VERSATILE_IB2_CTL_BASE + 0) -#define VERSATILE_IB2_STAT (VERSATILE_IB2_CTL_BASE + 4) -#endif - -#endif diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h deleted file mode 100644 index 986e3d303..000000000 --- a/arch/arm/mach-versatile/include/mach/uncompress.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/uncompress.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define AMBA_UART_DR (*(volatile unsigned char *)0x101F1000) -#define AMBA_UART_LCRH (*(volatile unsigned char *)0x101F102C) -#define AMBA_UART_CR (*(volatile unsigned char *)0x101F1030) -#define AMBA_UART_FR (*(volatile unsigned char *)0x101F1018) - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = c; -} - -static inline void flush(void) -{ - while (AMBA_UART_FR & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c deleted file mode 100644 index c97be4ea7..000000000 --- a/arch/arm/mach-versatile/pci.c +++ /dev/null @@ -1,368 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/pci.c - * - * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved. - * You can redistribute and/or modify this software under the terms of version 2 - * of the GNU General Public License as published by the Free Software Foundation. - * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED - * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software. - * - * ARM Versatile PCI driver. - * - * 14/04/2005 Initial version, colin.king@philips.com - * - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/init.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> - -/* - * these spaces are mapped using the following base registers: - * - * Usage Local Bus Memory Base/Map registers used - * - * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0, non prefetch - * Mem 60000000 - 6FFFFFFF LB_BASE1/LB_MAP1, prefetch - * IO 44000000 - 4FFFFFFF LB_BASE2/LB_MAP2, IO - * Cfg 42000000 - 42FFFFFF PCI config - * - */ -#define __IO_ADDRESS(n) ((void __iomem *)(unsigned long)IO_ADDRESS(n)) -#define SYS_PCICTL __IO_ADDRESS(VERSATILE_SYS_PCICTL) -#define PCI_IMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0) -#define PCI_IMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4) -#define PCI_IMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8) -#define PCI_SMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14) -#define PCI_SMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18) -#define PCI_SMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x1c) -#define PCI_SELFID __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc) - -#define DEVICE_ID_OFFSET 0x00 -#define CSR_OFFSET 0x04 -#define CLASS_ID_OFFSET 0x08 - -#define VP_PCI_DEVICE_ID 0x030010ee -#define VP_PCI_CLASS_ID 0x0b400000 - -static unsigned long pci_slot_ignore = 0; - -static int __init versatile_pci_slot_ignore(char *str) -{ - int retval; - int slot; - - while ((retval = get_option(&str,&slot))) { - if ((slot < 0) || (slot > 31)) { - printk("Illegal slot value: %d\n",slot); - } else { - pci_slot_ignore |= (1 << slot); - } - } - return 1; -} - -__setup("pci_slot_ignore=", versatile_pci_slot_ignore); - - -static void __iomem *__pci_addr(struct pci_bus *bus, - unsigned int devfn, int offset) -{ - unsigned int busnr = bus->number; - - /* - * Trap out illegal values - */ - if (offset > 255) - BUG(); - if (busnr > 255) - BUG(); - if (devfn > 255) - BUG(); - - return VERSATILE_PCI_CFG_VIRT_BASE + ((busnr << 16) | - (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset); -} - -static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *val) -{ - void __iomem *addr = __pci_addr(bus, devfn, where & ~3); - u32 v; - int slot = PCI_SLOT(devfn); - - if (pci_slot_ignore & (1 << slot)) { - /* Ignore this slot */ - switch (size) { - case 1: - v = 0xff; - break; - case 2: - v = 0xffff; - break; - default: - v = 0xffffffff; - } - } else { - switch (size) { - case 1: - v = __raw_readl(addr); - if (where & 2) v >>= 16; - if (where & 1) v >>= 8; - v &= 0xff; - break; - - case 2: - v = __raw_readl(addr); - if (where & 2) v >>= 16; - v &= 0xffff; - break; - - default: - v = __raw_readl(addr); - break; - } - } - - *val = v; - return PCIBIOS_SUCCESSFUL; -} - -static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - void __iomem *addr = __pci_addr(bus, devfn, where); - int slot = PCI_SLOT(devfn); - - if (pci_slot_ignore & (1 << slot)) { - return PCIBIOS_SUCCESSFUL; - } - - switch (size) { - case 1: - __raw_writeb((u8)val, addr); - break; - - case 2: - __raw_writew((u16)val, addr); - break; - - case 4: - __raw_writel(val, addr); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops pci_versatile_ops = { - .read = versatile_read_config, - .write = versatile_write_config, -}; - -static struct resource unused_mem = { - .name = "PCI unused", - .start = VERSATILE_PCI_MEM_BASE0, - .end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1, - .flags = IORESOURCE_MEM, -}; - -static struct resource non_mem = { - .name = "PCI non-prefetchable", - .start = VERSATILE_PCI_MEM_BASE1, - .end = VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1, - .flags = IORESOURCE_MEM, -}; - -static struct resource pre_mem = { - .name = "PCI prefetchable", - .start = VERSATILE_PCI_MEM_BASE2, - .end = VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1, - .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, -}; - -static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) -{ - int ret = 0; - - ret = request_resource(&iomem_resource, &unused_mem); - if (ret) { - printk(KERN_ERR "PCI: unable to allocate unused " - "memory region (%d)\n", ret); - goto out; - } - ret = request_resource(&iomem_resource, &non_mem); - if (ret) { - printk(KERN_ERR "PCI: unable to allocate non-prefetchable " - "memory region (%d)\n", ret); - goto release_unused_mem; - } - ret = request_resource(&iomem_resource, &pre_mem); - if (ret) { - printk(KERN_ERR "PCI: unable to allocate prefetchable " - "memory region (%d)\n", ret); - goto release_non_mem; - } - - /* - * the mem resource for this bus - * the prefetch mem resource for this bus - */ - pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); - pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); - - goto out; - - release_non_mem: - release_resource(&non_mem); - release_unused_mem: - release_resource(&unused_mem); - out: - return ret; -} - -int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) -{ - int ret = 0; - int i; - int myslot = -1; - unsigned long val; - void __iomem *local_pci_cfg_base; - - val = __raw_readl(SYS_PCICTL); - if (!(val & 1)) { - printk("Not plugged into PCI backplane!\n"); - ret = -EIO; - goto out; - } - - ret = pci_ioremap_io(0, VERSATILE_PCI_IO_BASE); - if (ret) - goto out; - - if (nr == 0) { - ret = pci_versatile_setup_resources(sys); - if (ret < 0) { - printk("pci_versatile_setup: resources... oops?\n"); - goto out; - } - } else { - printk("pci_versatile_setup: resources... nr == 0??\n"); - goto out; - } - - /* - * We need to discover the PCI core first to configure itself - * before the main PCI probing is performed - */ - for (i=0; i<32; i++) - if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) && - (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) { - myslot = i; - break; - } - - if (myslot == -1) { - printk("Cannot find PCI core!\n"); - ret = -EIO; - goto out; - } - - printk("PCI core found (slot %d)\n",myslot); - - __raw_writel(myslot, PCI_SELFID); - local_pci_cfg_base = VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11); - - val = __raw_readl(local_pci_cfg_base + CSR_OFFSET); - val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; - __raw_writel(val, local_pci_cfg_base + CSR_OFFSET); - - /* - * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM - */ - __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0); - __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1); - __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2); - - /* - * For many years the kernel and QEMU were symbiotically buggy - * in that they both assumed the same broken IRQ mapping. - * QEMU therefore attempts to auto-detect old broken kernels - * so that they still work on newer QEMU as they did on old - * QEMU. Since we now use the correct (ie matching-hardware) - * IRQ mapping we write a definitely different value to a - * PCI_INTERRUPT_LINE register to tell QEMU that we expect - * real hardware behaviour and it need not be backwards - * compatible for us. This write is harmless on real hardware. - */ - __raw_writel(0, VERSATILE_PCI_VIRT_BASE+PCI_INTERRUPT_LINE); - - /* - * Do not to map Versatile FPGA PCI device into memory space - */ - pci_slot_ignore |= (1 << myslot); - ret = 1; - - out: - return ret; -} - - -void __init pci_versatile_preinit(void) -{ - pcibios_min_mem = 0x50000000; - - __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0); - __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1); - __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2); - - __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0); - __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1); - __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2); - - __raw_writel(1, SYS_PCICTL); -} - -/* - * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this. - */ -static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - /* - * Slot INTA INTB INTC INTD - * 31 PCI1 PCI2 PCI3 PCI0 - * 30 PCI0 PCI1 PCI2 PCI3 - * 29 PCI3 PCI0 PCI1 PCI2 - */ - irq = IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3); - - return irq; -} - -static struct hw_pci versatile_pci __initdata = { - .map_irq = versatile_map_irq, - .nr_controllers = 1, - .ops = &pci_versatile_ops, - .setup = pci_versatile_setup, - .preinit = pci_versatile_preinit, -}; - -static int __init versatile_pci_init(void) -{ - pci_common_init(&versatile_pci); - return 0; -} - -subsys_initcall(versatile_pci_init); diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c deleted file mode 100644 index 1caef1093..000000000 --- a/arch/arm/mach-versatile/versatile_ab.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/versatile_ab.c - * - * Copyright (C) 2004 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> - -#include "core.h" - -MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .map_io = versatile_map_io, - .init_early = versatile_init_early, - .init_irq = versatile_init_irq, - .init_time = versatile_timer_init, - .init_machine = versatile_init, - .restart = versatile_restart, -MACHINE_END diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index 7de3e92a1..c44871851 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -22,15 +22,389 @@ */ #include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/slab.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> +#include <linux/platform_data/video-clcd-versatile.h> +#include <linux/amba/mmci.h> +#include <linux/mtd/physmap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> -#include "core.h" +/* macro to get at MMIO space when running virtually */ +#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) +#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) + +/* + * Memory definitions + */ +#define VERSATILE_FLASH_BASE 0x34000000 +#define VERSATILE_FLASH_SIZE SZ_64M + +/* + * ------------------------------------------------------------------------ + * Versatile Registers + * ------------------------------------------------------------------------ + */ +#define VERSATILE_SYS_LOCK_OFFSET 0x20 +#define VERSATILE_SYS_RESETCTL_OFFSET 0x40 +#define VERSATILE_SYS_PCICTL_OFFSET 0x44 +#define VERSATILE_SYS_MCI_OFFSET 0x48 +#define VERSATILE_SYS_FLASH_OFFSET 0x4C +#define VERSATILE_SYS_CLCD_OFFSET 0x50 + +/* + * VERSATILE_SYS_FLASH + */ +#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */ + +/* + * VERSATILE peripheral addresses + */ +#define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */ +#define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */ +#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */ +#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ +#define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */ +#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000) + +/* + * System controller bit assignment + */ +#define VERSATILE_REFCLK 0 +#define VERSATILE_TIMCLK 1 + +#define VERSATILE_TIMER1_EnSel 15 +#define VERSATILE_TIMER2_EnSel 17 +#define VERSATILE_TIMER3_EnSel 19 +#define VERSATILE_TIMER4_EnSel 21 + +static void __iomem *versatile_sys_base; +static void __iomem *versatile_ib2_ctrl; + +static void versatile_flash_set_vpp(struct platform_device *pdev, int on) +{ + u32 val; + + val = readl(versatile_sys_base + VERSATILE_SYS_FLASH_OFFSET); + if (on) + val |= VERSATILE_FLASHPROG_FLVPPEN; + else + val &= ~VERSATILE_FLASHPROG_FLVPPEN; + writel(val, versatile_sys_base + VERSATILE_SYS_FLASH_OFFSET); +} + +static struct physmap_flash_data versatile_flash_data = { + .width = 4, + .set_vpp = versatile_flash_set_vpp, +}; + +static struct resource versatile_flash_resource = { + .start = VERSATILE_FLASH_BASE, + .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +struct platform_device versatile_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &versatile_flash_data, + }, + .num_resources = 1, + .resource = &versatile_flash_resource, +}; + +unsigned int mmc_status(struct device *dev) +{ + struct amba_device *adev = container_of(dev, struct amba_device, dev); + u32 mask; + + if (adev->res.start == VERSATILE_MMCI0_BASE) + mask = 1; + else + mask = 2; + + return readl(versatile_sys_base + VERSATILE_SYS_MCI_OFFSET) & mask; +} + +static struct mmci_platform_data mmc0_plat_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .status = mmc_status, + .gpio_wp = -1, + .gpio_cd = -1, +}; + +static struct mmci_platform_data mmc1_plat_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .status = mmc_status, + .gpio_wp = -1, + .gpio_cd = -1, +}; + +/* + * CLCD support. + */ +#define SYS_CLCD_MODE_MASK (3 << 0) +#define SYS_CLCD_MODE_888 (0 << 0) +#define SYS_CLCD_MODE_5551 (1 << 0) +#define SYS_CLCD_MODE_565_RLSB (2 << 0) +#define SYS_CLCD_MODE_565_BLSB (3 << 0) +#define SYS_CLCD_NLCDIOON (1 << 2) +#define SYS_CLCD_VDDPOSSWITCH (1 << 3) +#define SYS_CLCD_PWR3V5SWITCH (1 << 4) +#define SYS_CLCD_ID_MASK (0x1f << 8) +#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) +#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8) +#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) +#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) +#define SYS_CLCD_ID_VGA (0x1f << 8) + +static bool is_sanyo_2_5_lcd; + +/* + * Disable all display connectors on the interface module. + */ +static void versatile_clcd_disable(struct clcd_fb *fb) +{ + void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET; + u32 val; + + val = readl(sys_clcd); + val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; + writel(val, sys_clcd); + + /* + * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off + */ + if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) { + unsigned long ctrl; + + ctrl = readl(versatile_ib2_ctrl); + ctrl &= ~0x01; + writel(ctrl, versatile_ib2_ctrl); + } +} + +/* + * Enable the relevant connector on the interface module. + */ +static void versatile_clcd_enable(struct clcd_fb *fb) +{ + struct fb_var_screeninfo *var = &fb->fb.var; + void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET; + u32 val; + + val = readl(sys_clcd); + val &= ~SYS_CLCD_MODE_MASK; + + switch (var->green.length) { + case 5: + val |= SYS_CLCD_MODE_5551; + break; + case 6: + if (var->red.offset == 0) + val |= SYS_CLCD_MODE_565_RLSB; + else + val |= SYS_CLCD_MODE_565_BLSB; + break; + case 8: + val |= SYS_CLCD_MODE_888; + break; + } + + /* + * Set the MUX + */ + writel(val, sys_clcd); + + /* + * And now enable the PSUs + */ + val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; + writel(val, sys_clcd); + + /* + * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on + */ + if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) { + unsigned long ctrl; + + ctrl = readl(versatile_ib2_ctrl); + ctrl |= 0x01; + writel(ctrl, versatile_ib2_ctrl); + } +} + +/* + * Detect which LCD panel is connected, and return the appropriate + * clcd_panel structure. Note: we do not have any information on + * the required timings for the 8.4in panel, so we presently assume + * VGA timings. + */ +static int versatile_clcd_setup(struct clcd_fb *fb) +{ + void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET; + const char *panel_name; + u32 val; + + is_sanyo_2_5_lcd = false; + + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; + if (val == SYS_CLCD_ID_SANYO_3_8) + panel_name = "Sanyo TM38QV67A02A"; + else if (val == SYS_CLCD_ID_SANYO_2_5) { + panel_name = "Sanyo QVGA Portrait"; + is_sanyo_2_5_lcd = true; + } else if (val == SYS_CLCD_ID_EPSON_2_2) + panel_name = "Epson L2F50113T00"; + else if (val == SYS_CLCD_ID_VGA) + panel_name = "VGA"; + else { + printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", + val); + panel_name = "VGA"; + } + + fb->panel = versatile_clcd_get_panel(panel_name); + if (!fb->panel) + return -EINVAL; + + return versatile_clcd_setup_dma(fb, SZ_1M); +} + +static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) +{ + clcdfb_decode(fb, regs); + + /* Always clear BGR for RGB565: we do the routing externally */ + if (fb->fb.var.green.length == 6) + regs->cntl &= ~CNTL_BGR; +} + +static struct clcd_board clcd_plat_data = { + .name = "Versatile", + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, + .check = clcdfb_check, + .decode = versatile_clcd_decode, + .disable = versatile_clcd_disable, + .enable = versatile_clcd_enable, + .setup = versatile_clcd_setup, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, +}; + +/* + * Lookup table for attaching a specific name and platform_data pointer to + * devices as they get created by of_platform_populate(). Ideally this table + * would not exist, but the current clock implementation depends on some devices + * having a specific name. + */ +struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data), + {} +}; + +static struct map_desc versatile_io_desc[] __initdata __maybe_unused = { + { + .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE), + .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE), + .length = SZ_4K * 9, + .type = MT_DEVICE + } +}; + +static void __init versatile_map_io(void) +{ + debug_ll_io_init(); + iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc)); +} + +static void __init versatile_init_early(void) +{ + u32 val; + + /* + * set clock frequency: + * VERSATILE_REFCLK is 32KHz + * VERSATILE_TIMCLK is 1MHz + */ + val = readl(__io_address(VERSATILE_SCTL_BASE)); + writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, + __io_address(VERSATILE_SCTL_BASE)); +} + +static void versatile_restart(enum reboot_mode mode, const char *cmd) +{ + u32 val; + + val = readl(versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET); + val |= 0x105; + + writel(0xa05f, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET); + writel(val, versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET); + writel(0, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET); +} + +static void __init versatile_dt_pci_init(void) +{ + u32 val; + struct device_node *np; + struct property *newprop; + + np = of_find_compatible_node(NULL, NULL, "arm,versatile-pci"); + if (!np) + return; + + /* Check if PCI backplane is detected */ + val = readl(versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET); + if (val & 1) { + /* + * Enable PCI accesses. Note that the documentaton is + * inconsistent whether or not this is needed, but the old + * driver had it so we will keep it. + */ + writel(1, versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET); + return; + } + + newprop = kzalloc(sizeof(*newprop), GFP_KERNEL); + if (!newprop) + return; + + newprop->name = kstrdup("status", GFP_KERNEL); + newprop->value = kstrdup("disabled", GFP_KERNEL); + newprop->length = sizeof("disabled"); + of_update_property(np, newprop); + + pr_info("Not plugged into PCI backplane!\n"); +} static void __init versatile_dt_init(void) { + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "arm,core-module-versatile"); + if (np) + versatile_sys_base = of_iomap(np, 0); + WARN_ON(!versatile_sys_base); + + versatile_ib2_ctrl = ioremap(VERSATILE_IB2_CTL_BASE, SZ_4K); + + versatile_dt_pci_init(); + + platform_device_register(&versatile_flash_device); of_platform_populate(NULL, of_default_bus_match_table, versatile_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c deleted file mode 100644 index 9a53d0bd9..000000000 --- a/arch/arm/mach-versatile/versatile_pb.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/versatile_pb.c - * - * Copyright (C) 2004 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl061.h> -#include <linux/amba/mmci.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> - -#include "core.h" - -#if 1 -#define IRQ_MMCI1A IRQ_VICSOURCE23 -#else -#define IRQ_MMCI1A IRQ_SIC_MMCI1A -#endif - -static struct mmci_platform_data mmc1_plat_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .status = mmc_status, - .gpio_wp = -1, - .gpio_cd = -1, -}; - -#define UART3_IRQ { IRQ_SIC_UART3 } -#define SCI1_IRQ { IRQ_SIC_SCI3 } -#define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B } - -/* - * These devices are connected via the DMA APB bridge - */ - -/* FPGA Primecells */ -APB_DEVICE(uart3, "fpga:09", UART3, NULL); -APB_DEVICE(sci1, "fpga:0a", SCI1, NULL); -APB_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); - - -static struct amba_device *amba_devs[] __initdata = { - &uart3_device, - &sci1_device, - &mmc1_device, -}; - -static void __init versatile_pb_init(void) -{ - int i; - - versatile_init(); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } -} - -MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .map_io = versatile_map_io, - .init_early = versatile_init_early, - .init_irq = versatile_init_irq, - .init_time = versatile_timer_init, - .init_machine = versatile_pb_init, - .restart = versatile_restart, -MACHINE_END diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 10f938957..398a297b7 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_VEXPRESS - bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 + bool "ARM Ltd. Versatile Express family" + depends on ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index 2a11d3ac8..a162ab46e 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -1,5 +1,5 @@ bool vexpress_smp_init_ops(void); -extern struct smp_operations vexpress_smp_dt_ops; +extern const struct smp_operations vexpress_smp_dt_ops; extern void vexpress_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 83188cf18..8b8d0724f 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -64,7 +64,7 @@ static void __init vexpress_smp_dt_prepare_cpus(unsigned int max_cpus) vexpress_flags_set(virt_to_phys(versatile_secondary_startup)); } -struct smp_operations __initdata vexpress_smp_dt_ops = { +const struct smp_operations vexpress_smp_dt_ops __initconst = { .smp_prepare_cpus = vexpress_smp_dt_prepare_cpus, .smp_secondary_init = versatile_secondary_init, .smp_boot_secondary = versatile_boot_secondary, diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 213230ee5..ca763251f 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -33,8 +33,8 @@ #include <mach/hardware.h> #include <mach/regs-serial.h> #include <mach/regs-clock.h> -#include <mach/regs-ebi.h> -#include <mach/regs-timer.h> +#include "regs-ebi.h" +#include "regs-timer.h" #include "cpu.h" #include "clock.h" diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/regs-ebi.h index b68455e7f..b68455e7f 100644 --- a/arch/arm/mach-w90x900/include/mach/regs-ebi.h +++ b/arch/arm/mach-w90x900/regs-ebi.h diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/regs-gcr.h index 6087abd93..6087abd93 100644 --- a/arch/arm/mach-w90x900/include/mach/regs-gcr.h +++ b/arch/arm/mach-w90x900/regs-gcr.h diff --git a/arch/arm/mach-w90x900/include/mach/regs-timer.h b/arch/arm/mach-w90x900/regs-timer.h index 8f390620c..8f390620c 100644 --- a/arch/arm/mach-w90x900/include/mach/regs-timer.h +++ b/arch/arm/mach-w90x900/regs-timer.h diff --git a/arch/arm/mach-w90x900/include/mach/regs-usb.h b/arch/arm/mach-w90x900/regs-usb.h index ab74b0c24..ab74b0c24 100644 --- a/arch/arm/mach-w90x900/include/mach/regs-usb.h +++ b/arch/arm/mach-w90x900/regs-usb.h diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c index cd1966ec9..cda085245 100644 --- a/arch/arm/mach-w90x900/time.c +++ b/arch/arm/mach-w90x900/time.c @@ -31,7 +31,7 @@ #include <asm/mach/time.h> #include <mach/map.h> -#include <mach/regs-timer.h> +#include "regs-timer.h" #include "nuc9xx.h" diff --git a/arch/arm/mach-zx/Kconfig b/arch/arm/mach-zx/Kconfig index 446334a25..209c97944 100644 --- a/arch/arm/mach-zx/Kconfig +++ b/arch/arm/mach-zx/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_ZX - bool "ZTE ZX family" if ARCH_MULTI_V7 + bool "ZTE ZX family" + depends on ARCH_MULTI_V7 help Support for ZTE ZX-based family of processors. TV set-top-box processor is supported. More will be diff --git a/arch/arm/mach-zx/platsmp.c b/arch/arm/mach-zx/platsmp.c index a3693982d..0297f9208 100644 --- a/arch/arm/mach-zx/platsmp.c +++ b/arch/arm/mach-zx/platsmp.c @@ -176,7 +176,7 @@ static void zx_secondary_init(unsigned int cpu) scu_power_mode(scu_base, SCU_PM_NORMAL); } -struct smp_operations zx_smp_ops __initdata = { +static const struct smp_operations zx_smp_ops __initconst = { .smp_prepare_cpus = zx_smp_prepare_cpus, .smp_secondary_init = zx_secondary_init, .smp_boot_secondary = zx_boot_secondary, diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 78e5e007f..fd0aeeb09 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,5 +1,7 @@ config ARCH_ZYNQ - bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 + bool "Xilinx Zynq ARM Cortex A9 Platform" + depends on ARCH_MULTI_V7 + select ARCH_HAS_RESET_CONTROLLER select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index 79cda2e5f..e771933db 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -30,7 +30,7 @@ extern char zynq_secondary_trampoline; extern char zynq_secondary_trampoline_jump; extern char zynq_secondary_trampoline_end; extern int zynq_cpun_start(u32 address, int cpu); -extern struct smp_operations zynq_smp_ops __initdata; +extern const struct smp_operations zynq_smp_ops; #endif extern void __iomem *zynq_scu_base; diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c index f66816c49..7cd9865bd 100644 --- a/arch/arm/mach-zynq/platsmp.c +++ b/arch/arm/mach-zynq/platsmp.c @@ -157,7 +157,7 @@ static void zynq_cpu_die(unsigned int cpu) } #endif -struct smp_operations zynq_smp_ops __initdata = { +const struct smp_operations zynq_smp_ops __initconst = { .smp_init_cpus = zynq_smp_init_cpus, .smp_prepare_cpus = zynq_smp_prepare_cpus, .smp_boot_secondary = zynq_boot_secondary, diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 41218867a..549f6d3ae 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -21,7 +21,7 @@ config CPU_ARM7TDMI # ARM720T config CPU_ARM720T - bool "Support ARM720T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR) + bool select CPU_32v4T select CPU_ABRT_LV4T select CPU_CACHE_V4 @@ -39,7 +39,7 @@ config CPU_ARM720T # ARM740T config CPU_ARM740T - bool "Support ARM740T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR) + bool depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T @@ -71,7 +71,7 @@ config CPU_ARM9TDMI # ARM920T config CPU_ARM920T - bool "Support ARM920T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR) + bool select CPU_32v4T select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -89,7 +89,7 @@ config CPU_ARM920T # ARM922T config CPU_ARM922T - bool "Support ARM922T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR) + bool select CPU_32v4T select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -108,7 +108,7 @@ config CPU_ARM922T # ARM925T config CPU_ARM925T - bool "Support ARM925T processor" if ARCH_OMAP1 + bool select CPU_32v4T select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -127,7 +127,7 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T - bool "Support ARM926T processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V5) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB) + bool select CPU_32v5 select CPU_ABRT_EV5TJ select CPU_CACHE_VIVT @@ -163,7 +163,7 @@ config CPU_FA526 # ARM940T config CPU_ARM940T - bool "Support ARM940T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR) + bool depends on !MMU select CPU_32v4T select CPU_ABRT_NOMMU @@ -181,7 +181,7 @@ config CPU_ARM940T # ARM946E-S config CPU_ARM946E - bool "Support ARM946E-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR) + bool depends on !MMU select CPU_32v5 select CPU_ABRT_NOMMU @@ -198,7 +198,7 @@ config CPU_ARM946E # ARM1020 - needs validating config CPU_ARM1020 - bool "Support ARM1020T (rev 0) processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR) + bool select CPU_32v5 select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -216,7 +216,7 @@ config CPU_ARM1020 # ARM1020E - needs validating config CPU_ARM1020E - bool "Support ARM1020E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR) + bool depends on n select CPU_32v5 select CPU_ABRT_EV4T @@ -229,7 +229,7 @@ config CPU_ARM1020E # ARM1022E config CPU_ARM1022 - bool "Support ARM1022E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR) + bool select CPU_32v5 select CPU_ABRT_EV4T select CPU_CACHE_VIVT @@ -247,7 +247,7 @@ config CPU_ARM1022 # ARM1026EJ-S config CPU_ARM1026 - bool "Support ARM1026EJ-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR) + bool select CPU_32v5 select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10 select CPU_CACHE_VIVT @@ -358,7 +358,7 @@ config CPU_PJ4B # ARMv6 config CPU_V6 - bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX) + bool select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 @@ -371,7 +371,7 @@ config CPU_V6 # ARMv6k config CPU_V6K - bool "Support ARM V6K processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX) + bool select CPU_32v6 select CPU_32v6K select CPU_ABRT_EV6 @@ -385,7 +385,7 @@ config CPU_V6K # ARMv7 config CPU_V7 - bool "Support ARM V7 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V7) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX) + bool select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 @@ -1005,8 +1005,6 @@ config ARM_L1_CACHE_SHIFT config ARM_DMA_MEM_BUFFERABLE bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K) && !CPU_V7 - depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \ - MACH_REALVIEW_PB11MP) default y if CPU_V6 || CPU_V6K || CPU_V7 help Historically, the kernel has used strongly ordered mappings to diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 493692d83..9f9d54271 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -790,7 +790,7 @@ static const struct l2c_init_data l2c310_init_fns __initconst = { }; static int __init __l2c_init(const struct l2c_init_data *data, - u32 aux_val, u32 aux_mask, u32 cache_id) + u32 aux_val, u32 aux_mask, u32 cache_id, bool nosync) { struct outer_cache_fns fns; unsigned way_size_bits, ways; @@ -866,6 +866,10 @@ static int __init __l2c_init(const struct l2c_init_data *data, fns.configure = outer_cache.configure; if (data->fixup) data->fixup(l2x0_base, cache_id, &fns); + if (nosync) { + pr_info("L2C: disabling outer sync\n"); + fns.sync = NULL; + } /* * Check if l2x0 controller is already enabled. If we are booting @@ -925,7 +929,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) if (data->save) data->save(l2x0_base); - __l2c_init(data, aux_val, aux_mask, cache_id); + __l2c_init(data, aux_val, aux_mask, cache_id, false); } #ifdef CONFIG_OF @@ -1060,6 +1064,18 @@ static void __init l2x0_of_parse(const struct device_node *np, val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; } + if (of_property_read_bool(np, "arm,parity-enable")) { + mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; + val |= L2C_AUX_CTRL_PARITY_ENABLE; + } else if (of_property_read_bool(np, "arm,parity-disable")) { + mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; + } + + if (of_property_read_bool(np, "arm,shared-override")) { + mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE; + val |= L2C_AUX_CTRL_SHARED_OVERRIDE; + } + ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K); if (ret) return; @@ -1176,6 +1192,14 @@ static void __init l2c310_of_parse(const struct device_node *np, *aux_mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE; } + if (of_property_read_bool(np, "arm,parity-enable")) { + *aux_val |= L2C_AUX_CTRL_PARITY_ENABLE; + *aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; + } else if (of_property_read_bool(np, "arm,parity-disable")) { + *aux_val &= ~L2C_AUX_CTRL_PARITY_ENABLE; + *aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; + } + prefetch = l2x0_saved_regs.prefetch_ctrl; ret = of_property_read_u32(np, "arm,double-linefill", &val); @@ -1704,6 +1728,7 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) struct resource res; u32 cache_id, old_aux; u32 cache_level = 2; + bool nosync = false; np = of_find_matching_node(NULL, l2x0_ids); if (!np) @@ -1742,6 +1767,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) if (cache_level != 2) pr_err("L2C: device tree specifies invalid cache level\n"); + nosync = of_property_read_bool(np, "arm,outer-sync-disable"); + /* Read back current (default) hardware configuration */ if (data->save) data->save(l2x0_base); @@ -1756,6 +1783,6 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) else cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); - return __l2c_init(data, aux_val, aux_mask, cache_id); + return __l2c_init(data, aux_val, aux_mask, cache_id, nosync); } #endif diff --git a/arch/arm/mm/cache-uniphier.c b/arch/arm/mm/cache-uniphier.c index 0502ba17a..a6fa7b73f 100644 --- a/arch/arm/mm/cache-uniphier.c +++ b/arch/arm/mm/cache-uniphier.c @@ -377,17 +377,6 @@ static const struct of_device_id uniphier_cache_match[] __initconst = { { /* sentinel */ } }; -static struct device_node * __init uniphier_cache_get_next_level_node( - struct device_node *np) -{ - u32 phandle; - - if (of_property_read_u32(np, "next-level-cache", &phandle)) - return NULL; - - return of_find_node_by_phandle(phandle); -} - static int __init __uniphier_cache_init(struct device_node *np, unsigned int *cache_level) { @@ -491,7 +480,7 @@ static int __init __uniphier_cache_init(struct device_node *np, * next level cache fails because we want to continue with available * cache levels. */ - next_np = uniphier_cache_get_next_level_node(np); + next_np = of_find_next_cache_node(np); if (next_np) { (*cache_level)++; ret = __uniphier_cache_init(next_np, cache_level); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 534a60ae2..0eca38125 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1200,10 +1200,7 @@ error: while (i--) if (pages[i]) __free_pages(pages[i], 0); - if (array_size <= PAGE_SIZE) - kfree(pages); - else - vfree(pages); + kvfree(pages); return NULL; } @@ -1211,7 +1208,6 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t size, struct dma_attrs *attrs) { int count = size >> PAGE_SHIFT; - int array_size = count * sizeof(struct page *); int i; if (dma_get_attr(DMA_ATTR_FORCE_CONTIGUOUS, attrs)) { @@ -1222,10 +1218,7 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, __free_pages(pages[i], 0); } - if (array_size <= PAGE_SIZE) - kfree(pages); - else - vfree(pages); + kvfree(pages); return 0; } diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 1ec8e7590..d0ba3551d 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -330,7 +330,7 @@ void flush_dcache_page(struct page *page) mapping = page_mapping(page); if (!cache_ops_need_broadcast() && - mapping && !page_mapped(page)) + mapping && !page_mapcount(page)) clear_bit(PG_dcache_clean, &page->flags); else { __flush_dcache_page(mapping, page); @@ -415,18 +415,3 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l */ __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } - -#ifdef CONFIG_TRANSPARENT_HUGEPAGE -#ifdef CONFIG_HAVE_RCU_TABLE_FREE -void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address, - pmd_t *pmdp) -{ - pmd_t pmd = pmd_mksplitting(*pmdp); - VM_BUG_ON(address & ~PMD_MASK); - set_pmd_at(vma->vm_mm, address, pmdp, pmd); - - /* dummy IPI to serialise against fast_gup */ - kick_all_cpus_sync(); -} -#endif /* CONFIG_HAVE_RCU_TABLE_FREE */ -#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index e7a81cebb..d65909697 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -86,7 +86,7 @@ static void identity_mapping_add(pgd_t *pgd, const char *text_start, prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF; - if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) + if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale_family()) prot |= PMD_BIT4; pgd += pgd_index(addr); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 7f8cd1b35..49bd08178 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -192,7 +192,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low, #ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { - return memblock_is_memory(__pfn_to_phys(pfn)); + return memblock_is_map_memory(__pfn_to_phys(pfn)); } EXPORT_SYMBOL(pfn_valid); #endif @@ -433,6 +433,9 @@ static void __init free_highpages(void) if (end <= max_low) continue; + if (memblock_is_nomap(mem)) + continue; + /* Truncate partial highmem entries */ if (start < max_low) start = max_low; diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 0c81056c1..66a978d05 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -30,6 +30,7 @@ #include <asm/cp15.h> #include <asm/cputype.h> #include <asm/cacheflush.h> +#include <asm/early_ioremap.h> #include <asm/mmu_context.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> @@ -469,3 +470,11 @@ int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr) } EXPORT_SYMBOL_GPL(pci_ioremap_io); #endif + +/* + * Must be called after early_fixmap_init + */ +void __init early_ioremap_init(void) +{ + early_ioremap_setup(); +} diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 407dc7865..66353caa3 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -173,8 +173,7 @@ unsigned long arch_mmap_rnd(void) { unsigned long rnd; - /* 8 bits of randomness in 20 address space bits */ - rnd = (unsigned long)get_random_int() % (1 << 8); + rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1); return rnd << PAGE_SHIFT; } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4867f5daf..434d76f0b 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -390,7 +390,7 @@ void __init early_fixmap_init(void) * The early fixmap range spans multiple pmds, for which * we are not prepared: */ - BUILD_BUG_ON((__fix_to_virt(__end_of_permanent_fixed_addresses) >> PMD_SHIFT) + BUILD_BUG_ON((__fix_to_virt(__end_of_early_ioremap_region) >> PMD_SHIFT) != FIXADDR_TOP >> PMD_SHIFT); pmd = fixmap_pmd(FIXADDR_TOP); @@ -477,7 +477,7 @@ static void __init build_mem_type_table(void) * "update-able on write" bit on ARM610). However, Xscale and * Xscale3 require this bit to be cleared. */ - if (cpu_is_xscale() || cpu_is_xsc3()) { + if (cpu_is_xscale_family()) { for (i = 0; i < ARRAY_SIZE(mem_types); i++) { mem_types[i].prot_sect &= ~PMD_BIT4; mem_types[i].prot_l1 &= ~PMD_BIT4; @@ -572,7 +572,7 @@ static void __init build_mem_type_table(void) * in the Short-descriptor translation table format descriptors. */ if (cpu_arch == CPU_ARCH_ARMv7 && - (read_cpuid_ext(CPUID_EXT_MMFR0) & 0xF) == 4) { + (read_cpuid_ext(CPUID_EXT_MMFR0) & 0xF) >= 4) { user_pmd_table |= PMD_PXNTABLE; } #endif @@ -724,30 +724,49 @@ static void __init *early_alloc(unsigned long sz) return early_alloc_aligned(sz, sz); } -static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot) +static void *__init late_alloc(unsigned long sz) +{ + void *ptr = (void *)__get_free_pages(PGALLOC_GFP, get_order(sz)); + + BUG_ON(!ptr); + return ptr; +} + +static pte_t * __init pte_alloc(pmd_t *pmd, unsigned long addr, + unsigned long prot, + void *(*alloc)(unsigned long sz)) { if (pmd_none(*pmd)) { - pte_t *pte = early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE); + pte_t *pte = alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE); __pmd_populate(pmd, __pa(pte), prot); } BUG_ON(pmd_bad(*pmd)); return pte_offset_kernel(pmd, addr); } +static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, + unsigned long prot) +{ + return pte_alloc(pmd, addr, prot, early_alloc); +} + static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, unsigned long end, unsigned long pfn, - const struct mem_type *type) + const struct mem_type *type, + void *(*alloc)(unsigned long sz), + bool ng) { - pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1); + pte_t *pte = pte_alloc(pmd, addr, type->prot_l1, alloc); do { - set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0); + set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), + ng ? PTE_EXT_NG : 0); pfn++; } while (pte++, addr += PAGE_SIZE, addr != end); } static void __init __map_init_section(pmd_t *pmd, unsigned long addr, unsigned long end, phys_addr_t phys, - const struct mem_type *type) + const struct mem_type *type, bool ng) { pmd_t *p = pmd; @@ -765,7 +784,7 @@ static void __init __map_init_section(pmd_t *pmd, unsigned long addr, pmd++; #endif do { - *pmd = __pmd(phys | type->prot_sect); + *pmd = __pmd(phys | type->prot_sect | (ng ? PMD_SECT_nG : 0)); phys += SECTION_SIZE; } while (pmd++, addr += SECTION_SIZE, addr != end); @@ -774,7 +793,8 @@ static void __init __map_init_section(pmd_t *pmd, unsigned long addr, static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, unsigned long end, phys_addr_t phys, - const struct mem_type *type) + const struct mem_type *type, + void *(*alloc)(unsigned long sz), bool ng) { pmd_t *pmd = pmd_offset(pud, addr); unsigned long next; @@ -792,10 +812,10 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, */ if (type->prot_sect && ((addr | next | phys) & ~SECTION_MASK) == 0) { - __map_init_section(pmd, addr, next, phys, type); + __map_init_section(pmd, addr, next, phys, type, ng); } else { alloc_init_pte(pmd, addr, next, - __phys_to_pfn(phys), type); + __phys_to_pfn(phys), type, alloc, ng); } phys += next - addr; @@ -805,21 +825,24 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end, phys_addr_t phys, - const struct mem_type *type) + const struct mem_type *type, + void *(*alloc)(unsigned long sz), bool ng) { pud_t *pud = pud_offset(pgd, addr); unsigned long next; do { next = pud_addr_end(addr, end); - alloc_init_pmd(pud, addr, next, phys, type); + alloc_init_pmd(pud, addr, next, phys, type, alloc, ng); phys += next - addr; } while (pud++, addr = next, addr != end); } #ifndef CONFIG_ARM_LPAE -static void __init create_36bit_mapping(struct map_desc *md, - const struct mem_type *type) +static void __init create_36bit_mapping(struct mm_struct *mm, + struct map_desc *md, + const struct mem_type *type, + bool ng) { unsigned long addr, length, end; phys_addr_t phys; @@ -859,7 +882,7 @@ static void __init create_36bit_mapping(struct map_desc *md, */ phys |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20); - pgd = pgd_offset_k(addr); + pgd = pgd_offset(mm, addr); end = addr + length; do { pud_t *pud = pud_offset(pgd, addr); @@ -867,7 +890,8 @@ static void __init create_36bit_mapping(struct map_desc *md, int i; for (i = 0; i < 16; i++) - *pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER); + *pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER | + (ng ? PMD_SECT_nG : 0)); addr += SUPERSECTION_SIZE; phys += SUPERSECTION_SIZE; @@ -876,33 +900,15 @@ static void __init create_36bit_mapping(struct map_desc *md, } #endif /* !CONFIG_ARM_LPAE */ -/* - * Create the page directory entries and any necessary - * page tables for the mapping specified by `md'. We - * are able to cope here with varying sizes and address - * offsets, and we take full advantage of sections and - * supersections. - */ -static void __init create_mapping(struct map_desc *md) +static void __init __create_mapping(struct mm_struct *mm, struct map_desc *md, + void *(*alloc)(unsigned long sz), + bool ng) { unsigned long addr, length, end; phys_addr_t phys; const struct mem_type *type; pgd_t *pgd; - if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { - pr_warn("BUG: not creating mapping for 0x%08llx at 0x%08lx in user region\n", - (long long)__pfn_to_phys((u64)md->pfn), md->virtual); - return; - } - - if ((md->type == MT_DEVICE || md->type == MT_ROM) && - md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START && - (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) { - pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n", - (long long)__pfn_to_phys((u64)md->pfn), md->virtual); - } - type = &mem_types[md->type]; #ifndef CONFIG_ARM_LPAE @@ -910,7 +916,7 @@ static void __init create_mapping(struct map_desc *md) * Catch 36-bit addresses */ if (md->pfn >= 0x100000) { - create_36bit_mapping(md, type); + create_36bit_mapping(mm, md, type, ng); return; } #endif @@ -925,12 +931,12 @@ static void __init create_mapping(struct map_desc *md) return; } - pgd = pgd_offset_k(addr); + pgd = pgd_offset(mm, addr); end = addr + length; do { unsigned long next = pgd_addr_end(addr, end); - alloc_init_pud(pgd, addr, next, phys, type); + alloc_init_pud(pgd, addr, next, phys, type, alloc, ng); phys += next - addr; addr = next; @@ -938,6 +944,43 @@ static void __init create_mapping(struct map_desc *md) } /* + * Create the page directory entries and any necessary + * page tables for the mapping specified by `md'. We + * are able to cope here with varying sizes and address + * offsets, and we take full advantage of sections and + * supersections. + */ +static void __init create_mapping(struct map_desc *md) +{ + if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { + pr_warn("BUG: not creating mapping for 0x%08llx at 0x%08lx in user region\n", + (long long)__pfn_to_phys((u64)md->pfn), md->virtual); + return; + } + + if ((md->type == MT_DEVICE || md->type == MT_ROM) && + md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START && + (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) { + pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n", + (long long)__pfn_to_phys((u64)md->pfn), md->virtual); + } + + __create_mapping(&init_mm, md, early_alloc, false); +} + +void __init create_mapping_late(struct mm_struct *mm, struct map_desc *md, + bool ng) +{ +#ifdef CONFIG_ARM_LPAE + pud_t *pud = pud_alloc(mm, pgd_offset(mm, md->virtual), md->virtual); + if (WARN_ON(!pud)) + return; + pmd_alloc(mm, pud, 0); +#endif + __create_mapping(mm, md, late_alloc, ng); +} + +/* * Create the architecture specific mappings */ void __init iotable_init(struct map_desc *io_desc, int nr) @@ -1392,6 +1435,9 @@ static void __init map_lowmem(void) phys_addr_t end = start + reg->size; struct map_desc map; + if (memblock_is_nomap(reg)) + continue; + if (end > arm_lowmem_limit) end = arm_lowmem_limit; if (start >= end) diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c index cf30daff8..d19b1ad29 100644 --- a/arch/arm/mm/pageattr.c +++ b/arch/arm/mm/pageattr.c @@ -49,6 +49,9 @@ static int change_memory_common(unsigned long addr, int numpages, WARN_ON_ONCE(1); } + if (!numpages) + return 0; + if (start < MODULES_VADDR || start >= MODULES_END) return -EINVAL; diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index d65edf717..6f07d2ef4 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -342,11 +342,13 @@ ENTRY(cpu_mohawk_switch_mm) */ .align 5 ENTRY(cpu_mohawk_set_pte_ext) +#ifdef CONFIG_MMU armv3_set_pte_ext mov r0, r0 mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB ret lr +#endif .globl cpu_mohawk_suspend_size .equ cpu_mohawk_suspend_size, 4 * 6 diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 8e1ea433c..0f92d575a 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -274,10 +274,12 @@ __v7_ca15mp_setup: __v7_b15mp_setup: __v7_ca17mp_setup: mov r10, #0 -1: adr r12, __v7_setup_stack @ the local stack - stmia r12, {r0-r5, lr} @ v7_invalidate_l1 touches r0-r6 +1: adr r0, __v7_setup_stack_ptr + ldr r12, [r0] + add r12, r12, r0 @ the local stack + stmia r12, {r1-r6, lr} @ v7_invalidate_l1 touches r0-r6 bl v7_invalidate_l1 - ldmia r12, {r0-r5, lr} + ldmia r12, {r1-r6, lr} #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, r0, c1, c0, 1) ALT_UP(mov r0, #(1 << 6)) @ fake it for UP @@ -415,10 +417,12 @@ __v7_pj4b_setup: #endif /* CONFIG_CPU_PJ4B */ __v7_setup: - adr r12, __v7_setup_stack @ the local stack - stmia r12, {r0-r5, lr} @ v7_invalidate_l1 touches r0-r6 + adr r0, __v7_setup_stack_ptr + ldr r12, [r0] + add r12, r12, r0 @ the local stack + stmia r12, {r1-r6, lr} @ v7_invalidate_l1 touches r0-r6 bl v7_invalidate_l1 - ldmia r12, {r0-r5, lr} + ldmia r12, {r1-r6, lr} __v7_setup_cont: and r0, r9, #0xff000000 @ ARM? @@ -480,11 +484,16 @@ __errata_finish: orr r0, r0, r6 @ set them THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions ret lr @ return to head.S:__ret + + .align 2 +__v7_setup_stack_ptr: + .word __v7_setup_stack - . ENDPROC(__v7_setup) + .bss .align 2 __v7_setup_stack: - .space 4 * 7 @ 12 registers + .space 4 * 7 @ 7 registers __INITDATA diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index 67d920907..7229d8d0b 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -12,6 +12,7 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/memory.h> #include <asm/v7m.h> #include "proc-macros.S" @@ -97,19 +98,19 @@ __v7m_setup: mov r5, #0x00800000 str r5, [r0, V7M_SCB_SHPR3] @ set PendSV priority - @ SVC to run the kernel in this mode + @ SVC to switch to handler mode. Notice that this requires sp to + @ point to writeable memory because the processor saves + @ some registers to the stack. badr r1, 1f ldr r5, [r12, #11 * 4] @ read the SVC vector entry str r1, [r12, #11 * 4] @ write the temporary SVC vector entry mov r6, lr @ save LR - mov r7, sp @ save SP - ldr sp, =__v7m_setup_stack_top + ldr sp, =init_thread_union + THREAD_START_SP cpsie i svc #0 1: cpsid i str r5, [r12, #11 * 4] @ restore the original SVC vector entry mov lr, r6 @ restore LR - mov sp, r7 @ restore SP @ Special-purpose control register mov r1, #1 @@ -123,11 +124,6 @@ __v7m_setup: ret lr ENDPROC(__v7m_setup) - .align 2 -__v7m_setup_stack: - .space 4 * 8 @ 8 registers -__v7m_setup_stack_top: - define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 .section ".rodata" diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 8ca94d379..7a327bd32 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -36,6 +36,7 @@ */ #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/module.h> #include <linux/io.h> #include <linux/device.h> @@ -137,6 +138,31 @@ static int omap_dm_timer_reset(struct omap_dm_timer *timer) return 0; } +static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer) +{ + int ret; + struct clk *parent; + + /* + * FIXME: OMAP1 devices do not use the clock framework for dmtimers so + * do not call clk_get() for these devices. + */ + if (!timer->fclk) + return -ENODEV; + + parent = clk_get(&timer->pdev->dev, NULL); + if (IS_ERR(parent)) + return -ENODEV; + + ret = clk_set_parent(timer->fclk, parent); + if (ret < 0) + pr_err("%s: failed to set parent\n", __func__); + + clk_put(parent); + + return ret; +} + static int omap_dm_timer_prepare(struct omap_dm_timer *timer) { int rc; @@ -166,7 +192,11 @@ static int omap_dm_timer_prepare(struct omap_dm_timer *timer) __omap_dm_timer_enable_posted(timer); omap_dm_timer_disable(timer); - return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); + rc = omap_dm_timer_of_set_source(timer); + if (rc == -ENODEV) + return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); + + return rc; } static inline u32 omap_dm_timer_reserved_systimer(int id) @@ -504,6 +534,12 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) if (IS_ERR(timer->fclk)) return -EINVAL; +#if defined(CONFIG_COMMON_CLK) + /* Check if the clock has configurable parents */ + if (clk_hw_get_num_parents(__clk_get_hw(timer->fclk)) < 2) + return 0; +#endif + switch (source) { case OMAP_TIMER_SRC_SYS_CLK: parent_name = "timer_sys_ck"; @@ -943,6 +979,10 @@ static const struct of_device_id omap_timer_match[] = { .compatible = "ti,am335x-timer-1ms", .data = &omap3plus_pdata, }, + { + .compatible = "ti,dm816-timer", + .data = &omap3plus_pdata, + }, {}, }; MODULE_DEVICE_TABLE(of, omap_timer_match); diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 8861c367d..78c8bf404 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -21,7 +21,6 @@ #include <net/dsa.h> #include <linux/platform_data/dma-mv_xor.h> #include <linux/platform_data/usb-ehci-orion.h> -#include <mach/bridge-regs.h> #include <plat/common.h> /* Create a clkdev entry for a given device/clk */ @@ -589,26 +588,6 @@ void __init orion_spi_1_init(unsigned long mapbase) } /***************************************************************************** - * Watchdog - ****************************************************************************/ -static struct resource orion_wdt_resource[] = { - DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04), - DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04), -}; - -static struct platform_device orion_wdt_device = { - .name = "orion_wdt", - .id = -1, - .num_resources = ARRAY_SIZE(orion_wdt_resource), - .resource = orion_wdt_resource, -}; - -void __init orion_wdt_init(void) -{ - platform_device_register(&orion_wdt_device); -} - -/***************************************************************************** * XOR ****************************************************************************/ static u64 orion_xor_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index d9a24f605..9e6d76ad4 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -75,8 +75,6 @@ void __init orion_spi_init(unsigned long mapbase); void __init orion_spi_1_init(unsigned long mapbase); -void __init orion_wdt_init(void); - void __init orion_xor0_init(unsigned long mapbase_low, unsigned long mapbase_high, unsigned long irq_0, diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 8c1fc0600..5b63b28b0 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -18,7 +18,6 @@ #include <asm/exception.h> #include <plat/irq.h> #include <plat/orion-gpio.h> -#include <mach/bridge-regs.h> void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) { diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c index 7310bcfb2..5b4ff9373 100644 --- a/arch/arm/plat-orion/mpp.c +++ b/arch/arm/plat-orion/mpp.c @@ -13,7 +13,6 @@ #include <linux/mbus.h> #include <linux/io.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <plat/orion-gpio.h> #include <plat/mpp.h> diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 1fc941944..557b134db 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -1,8 +1,9 @@ # # Makefile for code common across different PXA processor families # +ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include -obj-y := dma.o +obj-$(CONFIG_ARCH_PXA) := dma.o obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index daa1a65f2..ba13f793f 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -34,7 +34,6 @@ #include <linux/of_device.h> #include <asm/irq.h> -#include <mach/hardware.h> static DEFINE_MUTEX(ssp_lock); static LIST_HEAD(ssp_list); diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 57729b915..e8229b9fe 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -39,7 +39,6 @@ config S3C_LOWLEVEL_UART_PORT config SAMSUNG_ATAGS def_bool n - depends on !ARCH_MULTIPLATFORM depends on ATAGS help This option enables ATAGS based boot support code for @@ -70,6 +69,7 @@ config S3C_GPIO_TRACK config S3C_ADC bool "ADC common driver support" + depends on !ARCH_MULTIPLATFORM help Core support for the ADC block found in the Samsung SoC systems for drivers such as the touchscreen and hwmon to use to share @@ -225,6 +225,9 @@ config S3C24XX_PWM Support for exporting the PWM timer blocks via the pwm device system +config GPIO_SAMSUNG + def_bool y + config SAMSUNG_PM_GPIO bool default y if GPIO_SAMSUNG && PM diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 8c911760f..be172efec 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -4,7 +4,8 @@ # # Licensed under GPLv2 -ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include +ccflags-$(CONFIG_ARCH_S3C64XX) := -I$(srctree)/arch/arm/mach-s3c64xx/include +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include # Objects we always build independent of SoC choice @@ -21,6 +22,8 @@ obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o +obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o + # PM support obj-$(CONFIG_PM_SLEEP) += pm-common.o diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 82074625d..b53d4ff3b 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -36,7 +36,7 @@ #include <linux/platform_data/s3c-hsotg.h> #include <linux/platform_data/dma-s3c24xx.h> -#include <media/s5p_hdmi.h> +#include <linux/platform_data/media/s5p_hdmi.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -65,6 +65,7 @@ #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/usb-phy.h> #include <plat/regs-spi.h> +#include <linux/platform_data/asoc-s3c.h> #include <linux/platform_data/spi-s3c64xx.h> static u64 samsung_device_dma_mask = DMA_BIT_MASK(32); @@ -74,9 +75,15 @@ static u64 samsung_device_dma_mask = DMA_BIT_MASK(32); static struct resource s3c_ac97_resource[] = { [0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97), [1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97), - [2] = DEFINE_RES_DMA_NAMED(DMACH_PCM_OUT, "PCM out"), - [3] = DEFINE_RES_DMA_NAMED(DMACH_PCM_IN, "PCM in"), - [4] = DEFINE_RES_DMA_NAMED(DMACH_MIC_IN, "Mic in"), +}; + +static struct s3c_audio_pdata s3c_ac97_pdata = { +#ifdef CONFIG_S3C24XX_DMAC + .dma_filter = s3c24xx_dma_filter, +#endif + .dma_playback = (void *)DMACH_PCM_OUT, + .dma_capture = (void *)DMACH_PCM_IN, + .dma_capture_mic = (void *)DMACH_MIC_IN, }; struct platform_device s3c_device_ac97 = { @@ -87,6 +94,7 @@ struct platform_device s3c_device_ac97 = { .dev = { .dma_mask = &samsung_device_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s3c_ac97_pdata, } }; #endif /* CONFIG_CPU_S3C2440 */ @@ -111,12 +119,12 @@ struct platform_device s3c_device_adc = { #if defined(CONFIG_SAMSUNG_DEV_ADC) static struct resource s3c_adc_resource[] = { [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256), - [1] = DEFINE_RES_IRQ(IRQ_TC), - [2] = DEFINE_RES_IRQ(IRQ_ADC), + [1] = DEFINE_RES_IRQ(IRQ_ADC), + [2] = DEFINE_RES_IRQ(IRQ_TC), }; struct platform_device s3c_device_adc = { - .name = "samsung-adc", + .name = "exynos-adc", .id = -1, .num_resources = ARRAY_SIZE(s3c_adc_resource), .resource = s3c_adc_resource, @@ -566,6 +574,14 @@ static struct resource s3c_iis_resource[] = { [0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS), }; +static struct s3c_audio_pdata s3c_iis_platdata = { +#ifdef CONFIG_S3C24XX_DMAC + .dma_filter = s3c24xx_dma_filter, +#endif + .dma_playback = (void *)DMACH_I2S_OUT, + .dma_capture = (void *)DMACH_I2S_IN, +}; + struct platform_device s3c_device_iis = { .name = "s3c24xx-iis", .id = -1, @@ -574,6 +590,7 @@ struct platform_device s3c_device_iis = { .dev = { .dma_mask = &samsung_device_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s3c_iis_platdata, } }; #endif /* CONFIG_PLAT_S3C24XX */ @@ -939,31 +956,19 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_ #endif /* CONFIG_PLAT_S3C24XX */ #ifdef CONFIG_SAMSUNG_DEV_TS -static struct resource s3c_ts_resource[] = { - [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256), - [1] = DEFINE_RES_IRQ(IRQ_TC), -}; - static struct s3c2410_ts_mach_info default_ts_data __initdata = { .delay = 10000, .presc = 49, .oversampling_shift = 2, }; -struct platform_device s3c_device_ts = { - .name = "s3c64xx-ts", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_ts_resource), - .resource = s3c_ts_resource, -}; - -void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) +void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) { if (!pd) pd = &default_ts_data; s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info), - &s3c_device_ts); + &s3c_device_adc); } #endif /* CONFIG_SAMSUNG_DEV_TS */ @@ -1100,9 +1105,7 @@ struct platform_device s3c_device_wdt = { #ifdef CONFIG_S3C64XX_DEV_SPI0 static struct resource s3c64xx_spi0_resource[] = { [0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPI0_TX), - [2] = DEFINE_RES_DMA(DMACH_SPI0_RX), - [3] = DEFINE_RES_IRQ(IRQ_SPI0), + [1] = DEFINE_RES_IRQ(IRQ_SPI0), }; struct platform_device s3c64xx_device_spi0 = { @@ -1130,6 +1133,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; + pd.dma_tx = (void *)DMACH_SPI0_TX; + pd.dma_rx = (void *)DMACH_SPI0_RX; #if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; #elif defined(CONFIG_S3C64XX_PL080) @@ -1145,9 +1150,7 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, #ifdef CONFIG_S3C64XX_DEV_SPI1 static struct resource s3c64xx_spi1_resource[] = { [0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPI1_TX), - [2] = DEFINE_RES_DMA(DMACH_SPI1_RX), - [3] = DEFINE_RES_IRQ(IRQ_SPI1), + [1] = DEFINE_RES_IRQ(IRQ_SPI1), }; struct platform_device s3c64xx_device_spi1 = { @@ -1175,12 +1178,15 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; + pd.dma_tx = (void *)DMACH_SPI1_TX; + pd.dma_rx = (void *)DMACH_SPI1_RX; #if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; #elif defined(CONFIG_S3C64XX_PL080) pd.filter = pl08x_filter_id; #endif + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } #endif /* CONFIG_S3C64XX_DEV_SPI1 */ @@ -1188,9 +1194,7 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, #ifdef CONFIG_S3C64XX_DEV_SPI2 static struct resource s3c64xx_spi2_resource[] = { [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPI2_TX), - [2] = DEFINE_RES_DMA(DMACH_SPI2_RX), - [3] = DEFINE_RES_IRQ(IRQ_SPI2), + [1] = DEFINE_RES_IRQ(IRQ_SPI2), }; struct platform_device s3c64xx_device_spi2 = { @@ -1218,6 +1222,8 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; + pd.dma_tx = (void *)DMACH_SPI2_TX; + pd.dma_rx = (void *)DMACH_SPI2_RX; #if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; #elif defined(CONFIG_S3C64XX_PL080) diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c new file mode 100644 index 000000000..7861488f7 --- /dev/null +++ b/arch/arm/plat-samsung/gpio-samsung.c @@ -0,0 +1,1328 @@ +/* + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * SAMSUNG - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/ioport.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/of_address.h> + +#include <asm/irq.h> + +#include <mach/irqs.h> +#include <mach/map.h> +#include <mach/regs-gpio.h> +#include <mach/gpio-samsung.h> + +#include <plat/cpu.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <plat/pm.h> + +int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup; + + pup = __raw_readl(reg); + pup &= ~(3 << shift); + pup |= pull << shift; + __raw_writel(pup, reg); + + return 0; +} + +samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup = __raw_readl(reg); + + pup >>= shift; + pup &= 0x3; + + return (__force samsung_gpio_pull_t)pup; +} + +int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + switch (pull) { + case S3C_GPIO_PULL_NONE: + pull = 0x01; + break; + case S3C_GPIO_PULL_UP: + pull = 0x00; + break; + case S3C_GPIO_PULL_DOWN: + pull = 0x02; + break; + } + return samsung_gpio_setpull_updown(chip, off, pull); +} + +samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip, + unsigned int off) +{ + samsung_gpio_pull_t pull; + + pull = samsung_gpio_getpull_updown(chip, off); + + switch (pull) { + case 0x00: + pull = S3C_GPIO_PULL_UP; + break; + case 0x01: + case 0x03: + pull = S3C_GPIO_PULL_NONE; + break; + case 0x02: + pull = S3C_GPIO_PULL_DOWN; + break; + } + + return pull; +} + +static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull, + samsung_gpio_pull_t updown) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + if (pull == updown) + pup &= ~(1 << off); + else if (pull == S3C_GPIO_PULL_NONE) + pup |= (1 << off); + else + return -EINVAL; + + __raw_writel(pup, reg); + return 0; +} + +static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip, + unsigned int off, + samsung_gpio_pull_t updown) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup &= (1 << off); + return pup ? S3C_GPIO_PULL_NONE : updown; +} + +samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip, + unsigned int off) +{ + return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); +} + +int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); +} + +samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip, + unsigned int off) +{ + return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); +} + +int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); +} + +/* + * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has two bits of configuration per gpio, which have the following + * functions: + * 00 = input + * 01 = output + * 1x = special function + */ + +static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off * 2; + u32 con; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + if (cfg > 3) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x3 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which + * could be directly passed back to samsung_gpio_setcfg_2bit(), from the + * S3C_GPIO_SPECIAL() macro. + */ + +static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off * 2; + con &= 3; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + +/* + * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependent on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a separate set of functions for + * each case. + */ + +static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration + * register setting into a value the software can use, such as could be passed + * to samsung_gpio_setcfg_4bit(). + * + * @sa samsung_gpio_getcfg_2bit + */ + +static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + con = __raw_readl(reg); + con >>= shift; + con &= 0xf; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + +#ifdef CONFIG_PLAT_S3C24XX +/* + * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has one bit of configuration for the gpio, where setting the bit + * means the pin is in special function mode and unset means output. + */ + +static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off; + u32 con; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + + /* Map output to 0, and SFN2 to 1 */ + cfg -= 1; + if (cfg > 1) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x1 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable + * GPIO configuration value. + * + * @sa samsung_gpio_getcfg_2bit + * @sa samsung_gpio_getcfg_4bit + */ + +static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off; + con &= 1; + con++; + + return S3C_GPIO_SFN(con); +} +#endif + +static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chipcfg++) { + if (!chipcfg->set_config) + chipcfg->set_config = samsung_gpio_setcfg_4bit; + if (!chipcfg->get_config) + chipcfg->get_config = samsung_gpio_getcfg_4bit; + if (!chipcfg->set_pull) + chipcfg->set_pull = samsung_gpio_setpull_updown; + if (!chipcfg->get_pull) + chipcfg->get_pull = samsung_gpio_getpull_updown; + } +} + +struct samsung_gpio_cfg s3c24xx_gpiocfg_default = { + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, +}; + +#ifdef CONFIG_PLAT_S3C24XX +static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = { + .set_config = s3c24xx_gpio_setcfg_abank, + .get_config = s3c24xx_gpio_getcfg_abank, +}; +#endif + +static struct samsung_gpio_cfg samsung_gpio_cfgs[] = { + [0] = { + .cfg_eint = 0x0, + }, + [1] = { + .cfg_eint = 0x3, + }, + [2] = { + .cfg_eint = 0x7, + }, + [3] = { + .cfg_eint = 0xF, + }, + [4] = { + .cfg_eint = 0x0, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, + [5] = { + .cfg_eint = 0x2, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, + [6] = { + .cfg_eint = 0x3, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, + [7] = { + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, +}; + +/* + * Default routines for controlling GPIO, based on the original S3C24XX + * GPIO functions which deal with the case where each gpio bank of the + * chip is as following: + * + * base + 0x00: Control register, 2 bits per gpio + * gpio n: 2 bits starting at (2*n) + * 00 = input, 01 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n +*/ + +static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long con; + + samsung_gpio_lock(ourchip, flags); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + + __raw_writel(con, base + 0x00); + + samsung_gpio_unlock(ourchip, flags); + return 0; +} + +static int samsung_gpiolib_2bit_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + samsung_gpio_lock(ourchip, flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + con |= 1 << (offset * 2); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + samsung_gpio_unlock(ourchip, flags); + return 0; +} + +/* + * The samsung_gpiolib_4bit routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the + * state of the output. + */ + +static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + GPIOCON_OFF); + if (ourchip->bitmap_gpio_int & BIT(offset)) + con |= 0xf << con_4bit_shift(offset); + else + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + GPIOCON_OFF); + + pr_debug("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, base + GPIOCON_OFF); + __raw_writel(dat, base + GPIODAT_OFF); + + pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* + * The next set of routines are for the case where the GPIO configuration + * registers are 4 bits per GPIO but there is more than one register (the + * bank has more than 8 GPIOs. + * + * This case is the similar to the 4 bit case, but the registers are as + * follows: + * + * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x08: Data register, 1 bit per gpio + * bit n: data bit n + * + * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set + * routines we store the 'base + 0x4' address so that these routines see + * the data register at ourchip->base + 0x04. + */ + +static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + if (offset > 7) + offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + pr_debug("%s: %p: CON %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned con_offset = offset; + + if (con_offset > 7) + con_offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +#ifdef CONFIG_PLAT_S3C24XX +/* The next set of routines are for the case of s3c24xx bank a */ + +static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) +{ + return -EINVAL; +} + +static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + local_irq_save(flags); + + con = __raw_readl(base + 0x00); + dat = __raw_readl(base + 0x04); + + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + + __raw_writel(dat, base + 0x04); + + con &= ~(1 << offset); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); + return 0; +} +#endif + +static void samsung_gpiolib_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + + samsung_gpio_lock(ourchip, flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + samsung_gpio_unlock(ourchip, flags); +} + +static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + unsigned long val; + + val = __raw_readl(ourchip->base + 0x04); + val >>= offset; + val &= 1; + + return val; +} + +/* + * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios + * for use with the configuration calls, and other parts of the s3c gpiolib + * support code. + * + * Not all s3c support code will need this, as some configurations of cpu + * may only support one or two different configuration options and have an + * easy gpio to samsung_gpio_chip mapping function. If this is the case, then + * the machine support file should provide its own samsung_gpiolib_getchip() + * and any other necessary functions. + */ + +#ifdef CONFIG_S3C_GPIO_TRACK +struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END]; + +static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip) +{ + unsigned int gpn; + int i; + + gpn = chip->chip.base; + for (i = 0; i < chip->chip.ngpio; i++, gpn++) { + BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); + s3c_gpios[gpn] = chip; + } +} +#endif /* CONFIG_S3C_GPIO_TRACK */ + +/* + * samsung_gpiolib_add() - add the Samsung gpio_chip. + * @chip: The chip to register + * + * This is a wrapper to gpiochip_add() that takes our specific gpio chip + * information and makes the necessary alterations for the platform and + * notes the information for use with the configuration systems and any + * other parts of the system. + */ + +static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip) +{ + struct gpio_chip *gc = &chip->chip; + int ret; + + BUG_ON(!chip->base); + BUG_ON(!gc->label); + BUG_ON(!gc->ngpio); + + spin_lock_init(&chip->lock); + + if (!gc->direction_input) + gc->direction_input = samsung_gpiolib_2bit_input; + if (!gc->direction_output) + gc->direction_output = samsung_gpiolib_2bit_output; + if (!gc->set) + gc->set = samsung_gpiolib_set; + if (!gc->get) + gc->get = samsung_gpiolib_get; + +#ifdef CONFIG_PM + if (chip->pm != NULL) { + if (!chip->pm->save || !chip->pm->resume) + pr_err("gpio: %s has missing PM functions\n", + gc->label); + } else + pr_err("gpio: %s has no PM function\n", gc->label); +#endif + + /* gpiochip_add() prints own failure message on error. */ + ret = gpiochip_add_data(gc, chip); + if (ret >= 0) + s3c_gpiolib_track(chip); +} + +static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base) +{ + int i; + struct gpio_chip *gc = &chip->chip; + + for (i = 0 ; i < nr_chips; i++, chip++) { + /* skip banks not present on SoC */ + if (chip->chip.base >= S3C_GPIO_END) + continue; + + if (!chip->config) + chip->config = &s3c24xx_gpiocfg_default; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * 0x10); + + if (!gc->direction_input) + gc->direction_input = samsung_gpiolib_2bit_input; + if (!gc->direction_output) + gc->direction_output = samsung_gpiolib_2bit_output; + + samsung_gpiolib_add(chip); + } +} + +static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base, + unsigned int offset) +{ + int i; + + for (i = 0 ; i < nr_chips; i++, chip++) { + chip->chip.direction_input = samsung_gpiolib_2bit_input; + chip->chip.direction_output = samsung_gpiolib_2bit_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[7]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * offset); + + samsung_gpiolib_add(chip); + } +} + +/* + * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependent on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a separate set of function + * (samsung_gpiolib_add_4bit2_chips)for each case. + */ + +static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base) +{ + int i; + + for (i = 0 ; i < nr_chips; i++, chip++) { + chip->chip.direction_input = samsung_gpiolib_4bit_input; + chip->chip.direction_output = samsung_gpiolib_4bit_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[2]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * 0x20); + + chip->bitmap_gpio_int = 0; + + samsung_gpiolib_add(chip); + } +} + +static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + chip->chip.direction_input = samsung_gpiolib_4bit2_input; + chip->chip.direction_output = samsung_gpiolib_4bit2_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[2]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); + + samsung_gpiolib_add(chip); + } +} + +int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + struct samsung_gpio_chip *samsung_chip = gpiochip_get_data(chip); + + return samsung_chip->irq_base + offset; +} + +#ifdef CONFIG_PLAT_S3C24XX +static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset) +{ + if (offset < 4) { + if (soc_is_s3c2412()) + return IRQ_EINT0_2412 + offset; + else + return IRQ_EINT0 + offset; + } + + if (offset < 8) + return IRQ_EINT4 + offset - 4; + + return -EINVAL; +} +#endif + +#ifdef CONFIG_ARCH_S3C64XX +static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin) +{ + return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; +} + +static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin) +{ + return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; +} +#endif + +struct samsung_gpio_chip s3c24xx_gpios[] = { +#ifdef CONFIG_PLAT_S3C24XX + { + .config = &s3c24xx_gpiocfg_banka, + .chip = { + .base = S3C2410_GPA(0), + .owner = THIS_MODULE, + .label = "GPIOA", + .ngpio = 27, + .direction_input = s3c24xx_gpiolib_banka_input, + .direction_output = s3c24xx_gpiolib_banka_output, + }, + }, { + .chip = { + .base = S3C2410_GPB(0), + .owner = THIS_MODULE, + .label = "GPIOB", + .ngpio = 11, + }, + }, { + .chip = { + .base = S3C2410_GPC(0), + .owner = THIS_MODULE, + .label = "GPIOC", + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPD(0), + .owner = THIS_MODULE, + .label = "GPIOD", + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPE(0), + .label = "GPIOE", + .owner = THIS_MODULE, + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPF(0), + .owner = THIS_MODULE, + .label = "GPIOF", + .ngpio = 8, + .to_irq = s3c24xx_gpiolib_fbank_to_irq, + }, + }, { + .irq_base = IRQ_EINT8, + .chip = { + .base = S3C2410_GPG(0), + .owner = THIS_MODULE, + .label = "GPIOG", + .ngpio = 16, + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .chip = { + .base = S3C2410_GPH(0), + .owner = THIS_MODULE, + .label = "GPIOH", + .ngpio = 15, + }, + }, + /* GPIOS for the S3C2443 and later devices. */ + { + .base = S3C2440_GPJCON, + .chip = { + .base = S3C2410_GPJ(0), + .owner = THIS_MODULE, + .label = "GPIOJ", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPKCON, + .chip = { + .base = S3C2410_GPK(0), + .owner = THIS_MODULE, + .label = "GPIOK", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPLCON, + .chip = { + .base = S3C2410_GPL(0), + .owner = THIS_MODULE, + .label = "GPIOL", + .ngpio = 15, + }, + }, { + .base = S3C2443_GPMCON, + .chip = { + .base = S3C2410_GPM(0), + .owner = THIS_MODULE, + .label = "GPIOM", + .ngpio = 2, + }, + }, +#endif +}; + +/* + * GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 8 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 5 4Bit Yes 3 + * E 5 4Bit Yes None + * F 16 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 16 4Bit[2] No None + * L 15 4Bit[2] No None + * M 6 4Bit No IRQ_EINT + * N 16 2Bit No IRQ_EINT + * O 16 2Bit Yes 7 + * P 15 2Bit Yes 8 + * Q 9 2Bit Yes 9 + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ + +static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = { +#ifdef CONFIG_ARCH_S3C64XX + { + .chip = { + .base = S3C64XX_GPA(0), + .ngpio = S3C64XX_GPIO_A_NR, + .label = "GPA", + }, + }, { + .chip = { + .base = S3C64XX_GPB(0), + .ngpio = S3C64XX_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S3C64XX_GPC(0), + .ngpio = S3C64XX_GPIO_C_NR, + .label = "GPC", + }, + }, { + .chip = { + .base = S3C64XX_GPD(0), + .ngpio = S3C64XX_GPIO_D_NR, + .label = "GPD", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = S3C64XX_GPE(0), + .ngpio = S3C64XX_GPIO_E_NR, + .label = "GPE", + }, + }, { + .base = S3C64XX_GPG_BASE, + .chip = { + .base = S3C64XX_GPG(0), + .ngpio = S3C64XX_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S3C64XX_GPM_BASE, + .config = &samsung_gpio_cfgs[1], + .chip = { + .base = S3C64XX_GPM(0), + .ngpio = S3C64XX_GPIO_M_NR, + .label = "GPM", + .to_irq = s3c64xx_gpiolib_mbank_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = { +#ifdef CONFIG_ARCH_S3C64XX + { + .base = S3C64XX_GPH_BASE + 0x4, + .chip = { + .base = S3C64XX_GPH(0), + .ngpio = S3C64XX_GPIO_H_NR, + .label = "GPH", + }, + }, { + .base = S3C64XX_GPK_BASE + 0x4, + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = S3C64XX_GPK(0), + .ngpio = S3C64XX_GPIO_K_NR, + .label = "GPK", + }, + }, { + .base = S3C64XX_GPL_BASE + 0x4, + .config = &samsung_gpio_cfgs[1], + .chip = { + .base = S3C64XX_GPL(0), + .ngpio = S3C64XX_GPIO_L_NR, + .label = "GPL", + .to_irq = s3c64xx_gpiolib_lbank_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = { +#ifdef CONFIG_ARCH_S3C64XX + { + .base = S3C64XX_GPF_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPF(0), + .ngpio = S3C64XX_GPIO_F_NR, + .label = "GPF", + }, + }, { + .config = &samsung_gpio_cfgs[7], + .chip = { + .base = S3C64XX_GPI(0), + .ngpio = S3C64XX_GPIO_I_NR, + .label = "GPI", + }, + }, { + .config = &samsung_gpio_cfgs[7], + .chip = { + .base = S3C64XX_GPJ(0), + .ngpio = S3C64XX_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPO(0), + .ngpio = S3C64XX_GPIO_O_NR, + .label = "GPO", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPP(0), + .ngpio = S3C64XX_GPIO_P_NR, + .label = "GPP", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPQ(0), + .ngpio = S3C64XX_GPIO_Q_NR, + .label = "GPQ", + }, + }, { + .base = S3C64XX_GPN_BASE, + .irq_base = IRQ_EINT(0), + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S3C64XX_GPN(0), + .ngpio = S3C64XX_GPIO_N_NR, + .label = "GPN", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +/* TODO: cleanup soc_is_* */ +static __init int samsung_gpiolib_init(void) +{ + /* + * Currently there are two drivers that can provide GPIO support for + * Samsung SoCs. For device tree enabled platforms, the new + * pinctrl-samsung driver is used, providing both GPIO and pin control + * interfaces. For legacy (non-DT) platforms this driver is used. + */ + if (of_have_populated_dt()) + return 0; + + if (soc_is_s3c24xx()) { + samsung_gpiolib_set_cfg(samsung_gpio_cfgs, + ARRAY_SIZE(samsung_gpio_cfgs)); + s3c24xx_gpiolib_add_chips(s3c24xx_gpios, + ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO); + } else if (soc_is_s3c64xx()) { + samsung_gpiolib_set_cfg(samsung_gpio_cfgs, + ARRAY_SIZE(samsung_gpio_cfgs)); + samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit, + ARRAY_SIZE(s3c64xx_gpios_2bit), + S3C64XX_VA_GPIO + 0xE0, 0x20); + samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit, + ARRAY_SIZE(s3c64xx_gpios_4bit), + S3C64XX_VA_GPIO); + samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2, + ARRAY_SIZE(s3c64xx_gpios_4bit2)); + } + + return 0; +} +core_initcall(samsung_gpiolib_init); + +int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset; + int ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_setcfg(chip, offset, config); + samsung_gpio_unlock(chip, flags); + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_cfgpin); + +int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, + unsigned int cfg) +{ + int ret; + + for (; nr > 0; nr--, start++) { + ret = s3c_gpio_cfgpin(start, cfg); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); + +int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, + unsigned int cfg, samsung_gpio_pull_t pull) +{ + int ret; + + for (; nr > 0; nr--, start++) { + s3c_gpio_setpull(start, pull); + ret = s3c_gpio_cfgpin(start, cfg); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); + +unsigned s3c_gpio_getcfg(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + unsigned ret = 0; + int offset; + + if (chip) { + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_getcfg(chip, offset); + samsung_gpio_unlock(chip, flags); + } + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_getcfg); + +int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset, ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_setpull(chip, offset, pull); + samsung_gpio_unlock(chip, flags); + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_setpull); + +samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset; + u32 pup = 0; + + if (chip) { + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + pup = samsung_gpio_do_getpull(chip, offset); + samsung_gpio_unlock(chip, flags); + } + + return (__force samsung_gpio_pull_t)pup; +} +EXPORT_SYMBOL(s3c_gpio_getpull); + +#ifdef CONFIG_PLAT_S3C24XX +unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) +{ + unsigned long flags; + unsigned long misccr; + + local_irq_save(flags); + misccr = __raw_readl(S3C24XX_MISCCR); + misccr &= ~clear; + misccr ^= change; + __raw_writel(misccr, S3C24XX_MISCCR); + local_irq_restore(flags); + + return misccr; +} +EXPORT_SYMBOL(s3c2410_modify_misccr); +#endif diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 7f415ce74..9dd562ab0 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -41,14 +41,6 @@ static inline int s3c64xx_pm_init(void) extern unsigned long s3c_irqwake_intmask; extern unsigned long s3c_irqwake_eintmask; -/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ -extern unsigned long s3c_irqwake_intallow; -#ifdef CONFIG_PM_SLEEP -extern unsigned long s3c_irqwake_eintallow; -#else -#define s3c_irqwake_eintallow 0 -#endif - /* per-cpu sleep functions */ extern void (*pm_cpu_prep)(void); diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index 11fbbc26e..3776f7e75 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -152,6 +152,11 @@ static int __init s3c_arch_init(void) { int ret; + /* init is only needed for ATAGS based platforms */ + if (!IS_ENABLED(CONFIG_ATAGS) || + (!soc_is_s3c24xx() && !soc_is_s3c64xx())) + return 0; + // do the correct init for cpu if (cpu == NULL) { diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 82777c649..d7803b434 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -23,14 +23,10 @@ #include <asm/cacheflush.h> #include <asm/suspend.h> -#ifdef CONFIG_SAMSUNG_ATAGS #include <mach/map.h> -#ifndef CONFIG_ARCH_EXYNOS #include <mach/regs-clock.h> #include <mach/regs-irq.h> -#endif #include <mach/irqs.h> -#endif #include <asm/irq.h> diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index fc7ea529f..75cd7345c 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -12,6 +12,7 @@ #include <xen/page.h> #include <xen/interface/sched.h> #include <xen/xen-ops.h> +#include <asm/paravirt.h> #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> #include <asm/system_misc.h> @@ -25,6 +26,10 @@ #include <linux/cpufreq.h> #include <linux/cpu.h> #include <linux/console.h> +#include <linux/pvclock_gtod.h> +#include <linux/time64.h> +#include <linux/timekeeping.h> +#include <linux/timekeeper_internal.h> #include <linux/mm.h> @@ -79,6 +84,83 @@ int xen_unmap_domain_gfn_range(struct vm_area_struct *vma, } EXPORT_SYMBOL_GPL(xen_unmap_domain_gfn_range); +static unsigned long long xen_stolen_accounting(int cpu) +{ + struct vcpu_runstate_info state; + + BUG_ON(cpu != smp_processor_id()); + + xen_get_runstate_snapshot(&state); + + WARN_ON(state.state != RUNSTATE_running); + + return state.time[RUNSTATE_runnable] + state.time[RUNSTATE_offline]; +} + +static void xen_read_wallclock(struct timespec64 *ts) +{ + u32 version; + struct timespec64 now, ts_monotonic; + struct shared_info *s = HYPERVISOR_shared_info; + struct pvclock_wall_clock *wall_clock = &(s->wc); + + /* get wallclock at system boot */ + do { + version = wall_clock->version; + rmb(); /* fetch version before time */ + now.tv_sec = ((uint64_t)wall_clock->sec_hi << 32) | wall_clock->sec; + now.tv_nsec = wall_clock->nsec; + rmb(); /* fetch time before checking version */ + } while ((wall_clock->version & 1) || (version != wall_clock->version)); + + /* time since system boot */ + ktime_get_ts64(&ts_monotonic); + *ts = timespec64_add(now, ts_monotonic); +} + +static int xen_pvclock_gtod_notify(struct notifier_block *nb, + unsigned long was_set, void *priv) +{ + /* Protected by the calling core code serialization */ + static struct timespec64 next_sync; + + struct xen_platform_op op; + struct timespec64 now, system_time; + struct timekeeper *tk = priv; + + now.tv_sec = tk->xtime_sec; + now.tv_nsec = (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift); + system_time = timespec64_add(now, tk->wall_to_monotonic); + + /* + * We only take the expensive HV call when the clock was set + * or when the 11 minutes RTC synchronization time elapsed. + */ + if (!was_set && timespec64_compare(&now, &next_sync) < 0) + return NOTIFY_OK; + + op.cmd = XENPF_settime64; + op.u.settime64.mbz = 0; + op.u.settime64.secs = now.tv_sec; + op.u.settime64.nsecs = now.tv_nsec; + op.u.settime64.system_time = timespec64_to_ns(&system_time); + (void)HYPERVISOR_platform_op(&op); + + /* + * Move the next drift compensation time 11 minutes + * ahead. That's emulating the sync_cmos_clock() update for + * the hardware RTC. + */ + next_sync = now; + next_sync.tv_sec += 11 * 60; + + return NOTIFY_OK; +} + +static struct notifier_block xen_pvclock_gtod_notifier = { + .notifier_call = xen_pvclock_gtod_notify, +}; + static void xen_percpu_init(void) { struct vcpu_register_vcpu_info info; @@ -104,6 +186,8 @@ static void xen_percpu_init(void) BUG_ON(err); per_cpu(xen_vcpu, cpu) = vcpup; + xen_setup_runstate_info(cpu); + after_register_vcpu_info: enable_percpu_irq(xen_events_irq, 0); put_cpu(); @@ -271,6 +355,11 @@ static int __init xen_guest_init(void) register_cpu_notifier(&xen_cpu_notifier); + pv_time_ops.steal_clock = xen_stolen_accounting; + static_key_slow_inc(¶virt_steal_enabled); + if (xen_initial_domain()) + pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier); + return 0; } early_initcall(xen_guest_init); @@ -282,6 +371,11 @@ static int __init xen_pm_init(void) pm_power_off = xen_power_off; arm_pm_restart = xen_restart; + if (!xen_initial_domain()) { + struct timespec64 ts; + xen_read_wallclock(&ts); + do_settimeofday64(&ts); + } return 0; } @@ -307,5 +401,6 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op); EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op); EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op); EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_platform_op); EXPORT_SYMBOL_GPL(HYPERVISOR_multicall); EXPORT_SYMBOL_GPL(privcmd_call); diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 10fd99c56..9a36f4f49 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -89,6 +89,7 @@ HYPERCALL2(memory_op); HYPERCALL2(physdev_op); HYPERCALL3(vcpu_op); HYPERCALL1(tmem_op); +HYPERCALL1(platform_op_raw); HYPERCALL2(multicall); ENTRY(privcmd_call) |