Initial import

1 files changed, 155 insertions, 0 deletions

diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S
new file mode 100644
index 000000000..0565917f2
--- /dev/null
+++ b/arch/blackfin/kernel/fixed_code.S
@@ -0,0 +1,155 @@
+/*
+ * This file contains sequences of code that will be copied to a
+ * fixed location, defined in <asm/fixed_code.h>.  The interrupt
+ * handlers ensure that these sequences appear to be atomic when
+ * executed from userspace.
+ * These are aligned to 16 bytes, so that we have some space to replace
+ * these sequences with something else (e.g. kernel traps if we ever do
+ * BF561 SMP).
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/unistd.h>
+#include <asm/entry.h>
+
+__INIT
+
+ENTRY(_fixed_code_start)
+
+.align 16
+ENTRY(_sigreturn_stub)
+	P0 = __NR_rt_sigreturn;
+	EXCPT 0;
+	/* Speculative execution paranoia.  */
+0:	JUMP.S 0b;
+ENDPROC (_sigreturn_stub)
+
+.align 16
+	/*
+	 * Atomic swap, 8 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R1: value to store
+	 * Output:	R0: old contents of the memory address, zero extended.
+	 */
+ENTRY(_atomic_xchg32)
+	R0 = [P0];
+	[P0] = R1;
+	rts;
+ENDPROC (_atomic_xchg32)
+
+.align 16
+	/*
+	 * Compare and swap, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R1: compare value
+	 *		R2: new value to store
+	 * The new value is stored if the contents of the memory
+	 * address is equal to the compare value.
+	 * Output:	R0: old contents of the memory address.
+	 */
+ENTRY(_atomic_cas32)
+	R0 = [P0];
+	CC = R0 == R1;
+	IF !CC JUMP 1f;
+	[P0] = R2;
+1:
+	rts;
+ENDPROC (_atomic_cas32)
+
+.align 16
+	/*
+	 * Atomic add, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R0: value to add
+	 * Outputs:	R0: new contents of the memory address.
+	 *		R1: previous contents of the memory address.
+	 */
+ENTRY(_atomic_add32)
+	R1 = [P0];
+	R0 = R1 + R0;
+	[P0] = R0;
+	rts;
+ENDPROC (_atomic_add32)
+
+.align 16
+	/*
+	 * Atomic sub, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R0: value to subtract
+	 * Outputs:	R0: new contents of the memory address.
+	 *		R1: previous contents of the memory address.
+	 */
+ENTRY(_atomic_sub32)
+	R1 = [P0];
+	R0 = R1 - R0;
+	[P0] = R0;
+	rts;
+ENDPROC (_atomic_sub32)
+
+.align 16
+	/*
+	 * Atomic ior, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R0: value to ior
+	 * Outputs:	R0: new contents of the memory address.
+	 *		R1: previous contents of the memory address.
+	 */
+ENTRY(_atomic_ior32)
+	R1 = [P0];
+	R0 = R1 | R0;
+	[P0] = R0;
+	rts;
+ENDPROC (_atomic_ior32)
+
+.align 16
+	/*
+	 * Atomic and, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R0: value to and
+	 * Outputs:	R0: new contents of the memory address.
+	 *		R1: previous contents of the memory address.
+	 */
+ENTRY(_atomic_and32)
+	R1 = [P0];
+	R0 = R1 & R0;
+	[P0] = R0;
+	rts;
+ENDPROC (_atomic_and32)
+
+.align 16
+	/*
+	 * Atomic xor, 32 bit.
+	 * Inputs:	P0: memory address to use
+	 *		R0: value to xor
+	 * Outputs:	R0: new contents of the memory address.
+	 *		R1: previous contents of the memory address.
+	 */
+ENTRY(_atomic_xor32)
+	R1 = [P0];
+	R0 = R1 ^ R0;
+	[P0] = R0;
+	rts;
+ENDPROC (_atomic_xor32)
+
+.align 16
+	/*
+	 * safe_user_instruction
+	 * Four NOPS are enough to allow the pipeline to speculativily load
+	 * execute anything it wants. After that, things have gone bad, and
+	 * we are stuck - so panic. Since we might be in user space, we can't
+	 * call panic, so just cause a unhandled exception, this should cause
+	 * a dump of the trace buffer so we can tell were we are, and a reboot
+	 */
+ENTRY(_safe_user_instruction)
+	NOP; NOP; NOP; NOP;
+	EXCPT 0x4;
+ENDPROC(_safe_user_instruction)
+
+ENTRY(_fixed_code_end)
+
+__FINIT