summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-common/arch_checks.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /arch/blackfin/mach-common/arch_checks.c
Initial import
Diffstat (limited to 'arch/blackfin/mach-common/arch_checks.c')
-rw-r--r--arch/blackfin/mach-common/arch_checks.c66
1 files changed, 66 insertions, 0 deletions
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
new file mode 100644
index 000000000..d8643fdd0
--- /dev/null
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -0,0 +1,66 @@
+/*
+ * Do some checking to make sure things are OK
+ *
+ * Copyright 2007-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/fixed_code.h>
+#include <mach/anomaly.h>
+#include <asm/clocks.h>
+
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+
+# if (CONFIG_VCO_HZ > CONFIG_MAX_VCO_HZ)
+# error "VCO selected is more than maximum value. Please change the VCO multipler"
+# endif
+
+# if (CONFIG_SCLK_HZ > CONFIG_MAX_SCLK_HZ)
+# error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
+# endif
+
+# if (CONFIG_SCLK_HZ < CONFIG_MIN_SCLK_HZ)
+# error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
+# endif
+
+# if (ANOMALY_05000273) && (CONFIG_SCLK_HZ * 2 > CONFIG_CCLK_HZ)
+# error "ANOMALY 05000273, please make sure CCLK is at least 2x SCLK"
+# endif
+
+# if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) && (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) && (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
+# error "Please select sclk less than cclk"
+# endif
+
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+#if CONFIG_BOOT_LOAD < FIXED_CODE_END
+# error "The kernel load address must be after the fixed code section"
+#endif
+
+#if (CONFIG_BOOT_LOAD & 0x3)
+# error "The kernel load address must be 4 byte aligned"
+#endif
+
+/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
+#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
+# error "The kernel load address is too high; keep it below 10meg for safety"
+#endif
+
+#if ANOMALY_05000263 && defined(CONFIG_MPU)
+# error the MPU will not function safely while Anomaly 05000263 applies
+#endif
+
+#if ANOMALY_05000448
+# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
+#endif
+
+/* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
+#if ANOMALY_05000220 && \
+ (defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK))
+# error "Anomaly 05000220 does not allow you to use Write Back cache with L2 or External Memory"
+#endif
+
+#if ANOMALY_05000491 && !defined(CONFIG_ICACHE_FLUSH_L1)
+# error You need IFLUSH in L1 inst while Anomaly 05000491 applies
+#endif