Initial import

1 files changed, 301 insertions, 0 deletions

diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
new file mode 100644
index 000000000..a66d979ec
--- /dev/null
+++ b/arch/blackfin/mach-common/pm.c
@@ -0,0 +1,301 @@
+/*
+ * Blackfin power management
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ * based on arm/mach-omap/pm.c
+ *    Copyright 2001, Cliff Brake <cbrake@accelent.com> and others
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <asm/cplb.h>
+#include <asm/gpio.h>
+#include <asm/dma.h>
+#include <asm/dpmc.h>
+#include <asm/pm.h>
+
+#ifdef CONFIG_BF60x
+struct bfin_cpu_pm_fns *bfin_cpu_pm;
+#endif
+
+void bfin_pm_suspend_standby_enter(void)
+{
+#if !BFIN_GPIO_PINT
+	bfin_pm_standby_setup();
+#endif
+
+#ifdef CONFIG_BF60x
+	bfin_cpu_pm->enter(PM_SUSPEND_STANDBY);
+#else
+# ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
+	sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
+# else
+	sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
+# endif
+#endif
+
+#if !BFIN_GPIO_PINT
+	bfin_pm_standby_restore();
+#endif
+
+#ifndef CONFIG_BF60x
+#ifdef SIC_IWR0
+	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+# ifdef SIC_IWR1
+	/* BF52x system reset does not properly reset SIC_IWR1 which
+	 * will screw up the bootrom as it relies on MDMA0/1 waking it
+	 * up from IDLE instructions.  See this report for more info:
+	 * http://blackfin.uclinux.org/gf/tracker/4323
+	 */
+	if (ANOMALY_05000435)
+		bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+	else
+		bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+# endif
+# ifdef SIC_IWR2
+	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
+# endif
+#else
+	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
+#endif
+
+#endif
+}
+
+int bf53x_suspend_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy_nocache(memptr, (const void *) L1_CODE_START,
+			L1_CODE_LENGTH);
+	dma_memcpy_nocache(memptr + L1_CODE_LENGTH,
+			(const void *) L1_DATA_A_START, L1_DATA_A_LENGTH);
+	dma_memcpy_nocache(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
+			(const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
+	memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
+			L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
+			L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+int bf53x_resume_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy_nocache((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
+	dma_memcpy_nocache((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
+			L1_DATA_A_LENGTH);
+	dma_memcpy_nocache((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
+	memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
+# ifdef CONFIG_BF60x
+__attribute__((l1_text))
+# endif
+static void flushinv_all_dcache(void)
+{
+	register u32 way, bank, subbank, set;
+	register u32 status, addr;
+	u32 dmem_ctl = bfin_read_DMEM_CONTROL();
+
+	for (bank = 0; bank < 2; ++bank) {
+		if (!(dmem_ctl & (1 << (DMC1_P - bank))))
+			continue;
+
+		for (way = 0; way < 2; ++way)
+			for (subbank = 0; subbank < 4; ++subbank)
+				for (set = 0; set < 64; ++set) {
+
+					bfin_write_DTEST_COMMAND(
+						way << 26 |
+						bank << 23 |
+						subbank << 16 |
+						set << 5
+					);
+					CSYNC();
+					status = bfin_read_DTEST_DATA0();
+
+					/* only worry about valid/dirty entries */
+					if ((status & 0x3) != 0x3)
+						continue;
+
+
+					/* construct the address using the tag */
+					addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
+
+					/* flush it */
+					__asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
+				}
+	}
+}
+#endif
+
+int bfin_pm_suspend_mem_enter(void)
+{
+	int ret;
+#ifndef CONFIG_BF60x
+	int wakeup;
+#endif
+
+	unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
+					 + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
+					  GFP_ATOMIC);
+
+	if (memptr == NULL) {
+		panic("bf53x_suspend_l1_mem malloc failed");
+		return -ENOMEM;
+	}
+
+#ifndef CONFIG_BF60x
+	wakeup = bfin_read_VR_CTL() & ~FREQ;
+	wakeup |= SCKELOW;
+
+#ifdef CONFIG_PM_BFIN_WAKE_PH6
+	wakeup |= PHYWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_GP
+	wakeup |= GPWE;
+#endif
+#endif
+
+	ret = blackfin_dma_suspend();
+
+	if (ret) {
+		kfree(memptr);
+		return ret;
+	}
+
+#ifdef CONFIG_GPIO_ADI
+	bfin_gpio_pm_hibernate_suspend();
+#endif
+
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
+	flushinv_all_dcache();
+	udelay(1);
+#endif
+	_disable_dcplb();
+	_disable_icplb();
+	bf53x_suspend_l1_mem(memptr);
+
+#ifndef CONFIG_BF60x
+	do_hibernate(wakeup | vr_wakeup);	/* See you later! */
+#else
+	bfin_cpu_pm->enter(PM_SUSPEND_MEM);
+#endif
+
+	bf53x_resume_l1_mem(memptr);
+
+	_enable_icplb();
+	_enable_dcplb();
+
+#ifdef CONFIG_GPIO_ADI
+	bfin_gpio_pm_hibernate_restore();
+#endif
+	blackfin_dma_resume();
+
+	kfree(memptr);
+
+	return 0;
+}
+
+/*
+ *	bfin_pm_valid - Tell the PM core that we only support the standby sleep
+ *			state
+ *	@state:		suspend state we're checking.
+ *
+ */
+static int bfin_pm_valid(suspend_state_t state)
+{
+	return (state == PM_SUSPEND_STANDBY
+#if !(defined(BF533_FAMILY) || defined(CONFIG_BF561))
+	/*
+	 * On BF533/2/1:
+	 * If we enter Hibernate the SCKE Pin is driven Low,
+	 * so that the SDRAM enters Self Refresh Mode.
+	 * However when the reset sequence that follows hibernate
+	 * state is executed, SCKE is driven High, taking the
+	 * SDRAM out of Self Refresh.
+	 *
+	 * If you reconfigure and access the SDRAM "very quickly",
+	 * you are likely to avoid errors, otherwise the SDRAM
+	 * start losing its contents.
+	 * An external HW workaround is possible using logic gates.
+	 */
+	|| state == PM_SUSPEND_MEM
+#endif
+	);
+}
+
+/*
+ *	bfin_pm_enter - Actually enter a sleep state.
+ *	@state:		State we're entering.
+ *
+ */
+static int bfin_pm_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		bfin_pm_suspend_standby_enter();
+		break;
+	case PM_SUSPEND_MEM:
+		bfin_pm_suspend_mem_enter();
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+void bfin_pm_end(void)
+{
+	u32 cycle, cycle2;
+	u64 usec64;
+	u32 usec;
+
+	__asm__ __volatile__ (
+		"1: %0 = CYCLES2\n"
+		"%1 = CYCLES\n"
+		"%2 = CYCLES2\n"
+		"CC = %2 == %0\n"
+		"if ! CC jump 1b\n"
+		: "=d,a" (cycle2), "=d,a" (cycle), "=d,a" (usec) : : "CC"
+	);
+
+	usec64 = ((u64)cycle2 << 32) + cycle;
+	do_div(usec64, get_cclk() / USEC_PER_SEC);
+	usec = usec64;
+	if (usec == 0)
+		usec = 1;
+
+	pr_info("PM: resume of kernel completes after  %ld msec %03ld usec\n",
+		usec / USEC_PER_MSEC, usec % USEC_PER_MSEC);
+}
+#endif
+
+static const struct platform_suspend_ops bfin_pm_ops = {
+	.enter = bfin_pm_enter,
+	.valid	= bfin_pm_valid,
+#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+	.end = bfin_pm_end,
+#endif
+};
+
+static int __init bfin_pm_init(void)
+{
+	suspend_set_ops(&bfin_pm_ops);
+	return 0;
+}
+
+__initcall(bfin_pm_init);