Initial import

1 files changed, 131 insertions, 0 deletions

diff --git a/arch/cris/arch-v10/kernel/traps.c b/arch/cris/arch-v10/kernel/traps.c
new file mode 100644
index 000000000..7001beda7
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/traps.c
@@ -0,0 +1,131 @@
+/*
+ * Helper functions for trap handlers
+ *
+ * Copyright (C) 2000-2007, Axis Communications AB.
+ *
+ * Authors:   Bjorn Wesen
+ *            Hans-Peter Nilsson
+ *
+ */
+
+#include <linux/ptrace.h>
+#include <asm/uaccess.h>
+#include <arch/sv_addr_ag.h>
+#include <arch/system.h>
+
+void
+show_registers(struct pt_regs *regs)
+{
+	/*
+	 * It's possible to use either the USP register or current->thread.usp.
+	 * USP might not correspond to the current process for all cases this
+	 * function is called, and current->thread.usp isn't up to date for the
+	 * current process. Experience shows that using USP is the way to go.
+	 */
+	unsigned long usp = rdusp();
+
+	printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",
+	       regs->irp, regs->srp, regs->dccr, usp, regs->mof);
+
+	printk(" r0: %08lx  r1: %08lx   r2: %08lx  r3: %08lx\n",
+	       regs->r0, regs->r1, regs->r2, regs->r3);
+
+	printk(" r4: %08lx  r5: %08lx   r6: %08lx  r7: %08lx\n",
+	       regs->r4, regs->r5, regs->r6, regs->r7);
+
+	printk(" r8: %08lx  r9: %08lx  r10: %08lx r11: %08lx\n",
+	       regs->r8, regs->r9, regs->r10, regs->r11);
+
+	printk("r12: %08lx r13: %08lx oR10: %08lx  sp: %08lx\n",
+	       regs->r12, regs->r13, regs->orig_r10, (long unsigned)regs);
+
+	printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE);
+
+	printk("Process %s (pid: %d, stackpage=%08lx)\n",
+	       current->comm, current->pid, (unsigned long)current);
+
+	/*
+	 * When in-kernel, we also print out the stack and code at the
+	 * time of the fault..
+	 */
+	if (!user_mode(regs)) {
+		int i;
+
+		show_stack(NULL, (unsigned long *)usp);
+
+		/*
+		 * If the previous stack-dump wasn't a kernel one, dump the
+		 * kernel stack now.
+		 */
+		if (usp != 0)
+			show_stack(NULL, NULL);
+
+		printk("\nCode: ");
+
+		if (regs->irp < PAGE_OFFSET)
+			goto bad_value;
+
+		/*
+		 * Quite often the value at regs->irp doesn't point to the
+		 * interesting instruction, which often is the previous
+		 * instruction. So dump at an offset large enough that the
+		 * instruction decoding should be in sync at the interesting
+		 * point, but small enough to fit on a row. The regs->irp
+		 * location is pointed out in a ksymoops-friendly way by
+		 * wrapping the byte for that address in parenthesises.
+		 */
+		for (i = -12; i < 12; i++) {
+			unsigned char c;
+
+			if (__get_user(c, &((unsigned char *)regs->irp)[i])) {
+bad_value:
+				printk(" Bad IP value.");
+				break;
+			}
+
+			if (i == 0)
+				printk("(%02x) ", c);
+			else
+				printk("%02x ", c);
+		}
+		printk("\n");
+	}
+}
+
+void
+arch_enable_nmi(void)
+{
+	asm volatile ("setf m");
+}
+
+extern void (*nmi_handler)(struct pt_regs *);
+void handle_nmi(struct pt_regs *regs)
+{
+	if (nmi_handler)
+		nmi_handler(regs);
+
+	/* Wait until nmi is no longer active. (We enable NMI immediately after
+	   returning from this function, and we don't want it happening while
+	   exiting from the NMI interrupt handler.) */
+	while (*R_IRQ_MASK0_RD & IO_STATE(R_IRQ_MASK0_RD, nmi_pin, active))
+		;
+}
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+void
+handle_BUG(struct pt_regs *regs)
+{
+	struct bug_frame f;
+	unsigned char c;
+	unsigned long irp = regs->irp;
+
+	if (__copy_from_user(&f, (const void __user *)(irp - 8), sizeof f))
+		return;
+	if (f.prefix != BUG_PREFIX || f.magic != BUG_MAGIC)
+		return;
+	if (__get_user(c, f.filename))
+		f.filename = "<bad filename>";
+
+	printk("kernel BUG at %s:%d!\n", f.filename, f.line);
+}
+#endif