Initial import

3 files changed, 1159 insertions, 0 deletions

diff --git a/arch/cris/arch-v32/drivers/mach-fs/Makefile b/arch/cris/arch-v32/drivers/mach-fs/Makefile
new file mode 100644
index 000000000..5c6d2a2a0
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/mach-fs/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Etrax-specific drivers
+#
+
+obj-$(CONFIG_ETRAX_NANDFLASH)   += nandflash.o
+obj-$(CONFIG_ETRAX_GPIO)        += gpio.o
diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
new file mode 100644
index 000000000..009f4ee1b
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
@@ -0,0 +1,979 @@
+/*
+ * ETRAX CRISv32 general port I/O device
+ *
+ * Copyright (c) 1999-2006 Axis Communications AB
+ *
+ * Authors:    Bjorn Wesen      (initial version)
+ *             Ola Knutsson     (LED handling)
+ *             Johan Adolfsson  (read/set directions, write, port G,
+ *                               port to ETRAX FS.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+
+#include <asm/etraxgpio.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/gio_defs.h>
+#include <hwregs/intr_vect_defs.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+#include "../i2c.h"
+
+#define VIRT_I2C_ADDR 0x40
+#endif
+
+/* The following gio ports on ETRAX FS is available:
+ * pa  8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge
+ * pb 18 bits
+ * pc 18 bits
+ * pd 18 bits
+ * pe 18 bits
+ * each port has a rw_px_dout, r_px_din and rw_px_oe register.
+ */
+
+#define GPIO_MAJOR 120  /* experimental MAJOR number */
+
+#define D(x)
+
+#if 0
+static int dp_cnt;
+#define DP(x) \
+	do { \
+		dp_cnt++; \
+		if (dp_cnt % 1000 == 0) \
+			x; \
+	} while (0)
+#else
+#define DP(x)
+#endif
+
+static DEFINE_MUTEX(gpio_mutex);
+static char gpio_name[] = "etrax gpio";
+
+#if 0
+static wait_queue_head_t *gpio_wq;
+#endif
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
+	unsigned long arg);
+#endif
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
+	loff_t *off);
+static int gpio_open(struct inode *inode, struct file *filp);
+static int gpio_release(struct inode *inode, struct file *filp);
+static unsigned int gpio_poll(struct file *filp,
+	struct poll_table_struct *wait);
+
+/* private data per open() of this driver */
+
+struct gpio_private {
+	struct gpio_private *next;
+	/* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
+	unsigned char clk_mask;
+	unsigned char data_mask;
+	unsigned char write_msb;
+	unsigned char pad1;
+	/* These fields are generic */
+	unsigned long highalarm, lowalarm;
+	wait_queue_head_t alarm_wq;
+	int minor;
+};
+
+/* linked list of alarms to check for */
+
+static struct gpio_private *alarmlist;
+
+static int gpio_some_alarms; /* Set if someone uses alarm */
+static unsigned long gpio_pa_high_alarms;
+static unsigned long gpio_pa_low_alarms;
+
+static DEFINE_SPINLOCK(alarm_lock);
+
+#define NUM_PORTS (GPIO_MINOR_LAST+1)
+#define GIO_REG_RD_ADDR(reg) \
+	(volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
+#define GIO_REG_WR_ADDR(reg) \
+	(volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
+unsigned long led_dummy;
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static unsigned long virtual_dummy;
+static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
+static unsigned short cached_virtual_gpio_read;
+#endif
+
+static volatile unsigned long *data_out[NUM_PORTS] = {
+	GIO_REG_WR_ADDR(rw_pa_dout),
+	GIO_REG_WR_ADDR(rw_pb_dout),
+	&led_dummy,
+	GIO_REG_WR_ADDR(rw_pc_dout),
+	GIO_REG_WR_ADDR(rw_pd_dout),
+	GIO_REG_WR_ADDR(rw_pe_dout),
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	&virtual_dummy,
+#endif
+};
+
+static volatile unsigned long *data_in[NUM_PORTS] = {
+	GIO_REG_RD_ADDR(r_pa_din),
+	GIO_REG_RD_ADDR(r_pb_din),
+	&led_dummy,
+	GIO_REG_RD_ADDR(r_pc_din),
+	GIO_REG_RD_ADDR(r_pd_din),
+	GIO_REG_RD_ADDR(r_pe_din),
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	&virtual_dummy,
+#endif
+};
+
+static unsigned long changeable_dir[NUM_PORTS] = {
+	CONFIG_ETRAX_PA_CHANGEABLE_DIR,
+	CONFIG_ETRAX_PB_CHANGEABLE_DIR,
+	0,
+	CONFIG_ETRAX_PC_CHANGEABLE_DIR,
+	CONFIG_ETRAX_PD_CHANGEABLE_DIR,
+	CONFIG_ETRAX_PE_CHANGEABLE_DIR,
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	CONFIG_ETRAX_PV_CHANGEABLE_DIR,
+#endif
+};
+
+static unsigned long changeable_bits[NUM_PORTS] = {
+	CONFIG_ETRAX_PA_CHANGEABLE_BITS,
+	CONFIG_ETRAX_PB_CHANGEABLE_BITS,
+	0,
+	CONFIG_ETRAX_PC_CHANGEABLE_BITS,
+	CONFIG_ETRAX_PD_CHANGEABLE_BITS,
+	CONFIG_ETRAX_PE_CHANGEABLE_BITS,
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	CONFIG_ETRAX_PV_CHANGEABLE_BITS,
+#endif
+};
+
+static volatile unsigned long *dir_oe[NUM_PORTS] = {
+	GIO_REG_WR_ADDR(rw_pa_oe),
+	GIO_REG_WR_ADDR(rw_pb_oe),
+	&led_dummy,
+	GIO_REG_WR_ADDR(rw_pc_oe),
+	GIO_REG_WR_ADDR(rw_pd_oe),
+	GIO_REG_WR_ADDR(rw_pe_oe),
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	&virtual_rw_pv_oe,
+#endif
+};
+
+
+
+static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
+{
+	unsigned int mask = 0;
+	struct gpio_private *priv = file->private_data;
+	unsigned long data;
+	poll_wait(file, &priv->alarm_wq, wait);
+	if (priv->minor == GPIO_MINOR_A) {
+		reg_gio_rw_intr_cfg intr_cfg;
+		unsigned long tmp;
+		unsigned long flags;
+
+		local_irq_save(flags);
+		data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din,
+			REG_RD(gio, regi_gio, r_pa_din));
+		/* PA has support for interrupt
+		 * lets activate high for those low and with highalarm set
+		 */
+		intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
+
+		tmp = ~data & priv->highalarm & 0xFF;
+		if (tmp & (1 << 0))
+			intr_cfg.pa0 = regk_gio_hi;
+		if (tmp & (1 << 1))
+			intr_cfg.pa1 = regk_gio_hi;
+		if (tmp & (1 << 2))
+			intr_cfg.pa2 = regk_gio_hi;
+		if (tmp & (1 << 3))
+			intr_cfg.pa3 = regk_gio_hi;
+		if (tmp & (1 << 4))
+			intr_cfg.pa4 = regk_gio_hi;
+		if (tmp & (1 << 5))
+			intr_cfg.pa5 = regk_gio_hi;
+		if (tmp & (1 << 6))
+			intr_cfg.pa6 = regk_gio_hi;
+		if (tmp & (1 << 7))
+			intr_cfg.pa7 = regk_gio_hi;
+		/*
+		 * lets activate low for those high and with lowalarm set
+		 */
+		tmp = data & priv->lowalarm & 0xFF;
+		if (tmp & (1 << 0))
+			intr_cfg.pa0 = regk_gio_lo;
+		if (tmp & (1 << 1))
+			intr_cfg.pa1 = regk_gio_lo;
+		if (tmp & (1 << 2))
+			intr_cfg.pa2 = regk_gio_lo;
+		if (tmp & (1 << 3))
+			intr_cfg.pa3 = regk_gio_lo;
+		if (tmp & (1 << 4))
+			intr_cfg.pa4 = regk_gio_lo;
+		if (tmp & (1 << 5))
+			intr_cfg.pa5 = regk_gio_lo;
+		if (tmp & (1 << 6))
+			intr_cfg.pa6 = regk_gio_lo;
+		if (tmp & (1 << 7))
+			intr_cfg.pa7 = regk_gio_lo;
+
+		REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
+		local_irq_restore(flags);
+	} else if (priv->minor <= GPIO_MINOR_E)
+		data = *data_in[priv->minor];
+	else
+		return 0;
+
+	if ((data & priv->highalarm) || (~data & priv->lowalarm))
+		mask = POLLIN|POLLRDNORM;
+
+	DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
+	return mask;
+}
+
+int etrax_gpio_wake_up_check(void)
+{
+	struct gpio_private *priv;
+	unsigned long data = 0;
+	unsigned long flags;
+	int ret = 0;
+	spin_lock_irqsave(&alarm_lock, flags);
+	priv = alarmlist;
+	while (priv) {
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+		if (priv->minor == GPIO_MINOR_V)
+			data = (unsigned long)cached_virtual_gpio_read;
+		else {
+			data = *data_in[priv->minor];
+			if (priv->minor == GPIO_MINOR_A)
+				priv->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
+		}
+#else
+		data = *data_in[priv->minor];
+#endif
+		if ((data & priv->highalarm) ||
+		    (~data & priv->lowalarm)) {
+			DP(printk(KERN_DEBUG
+				"etrax_gpio_wake_up_check %i\n", priv->minor));
+			wake_up_interruptible(&priv->alarm_wq);
+			ret = 1;
+		}
+		priv = priv->next;
+	}
+	spin_unlock_irqrestore(&alarm_lock, flags);
+	return ret;
+}
+
+static irqreturn_t
+gpio_poll_timer_interrupt(int irq, void *dev_id)
+{
+	if (gpio_some_alarms)
+		return IRQ_RETVAL(etrax_gpio_wake_up_check());
+	return IRQ_NONE;
+}
+
+static irqreturn_t
+gpio_pa_interrupt(int irq, void *dev_id)
+{
+	reg_gio_rw_intr_mask intr_mask;
+	reg_gio_r_masked_intr masked_intr;
+	reg_gio_rw_ack_intr ack_intr;
+	unsigned long tmp;
+	unsigned long tmp2;
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	unsigned char enable_gpiov_ack = 0;
+#endif
+
+	/* Find what PA interrupts are active */
+	masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
+	tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
+
+	/* Find those that we have enabled */
+	spin_lock(&alarm_lock);
+	tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms);
+	spin_unlock(&alarm_lock);
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	/* Something changed on virtual GPIO. Interrupt is acked by
+	 * reading the device.
+	 */
+	if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
+		i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
+			sizeof(cached_virtual_gpio_read));
+		enable_gpiov_ack = 1;
+	}
+#endif
+
+	/* Ack them */
+	ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
+	REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
+
+	/* Disable those interrupts.. */
+	intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
+	tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
+	tmp2 &= ~tmp;
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	/* Do not disable interrupt on virtual GPIO. Changes on virtual
+	 * pins are only noticed by an interrupt.
+	 */
+	if (enable_gpiov_ack)
+		tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
+#endif
+	intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
+	REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
+
+	if (gpio_some_alarms)
+		return IRQ_RETVAL(etrax_gpio_wake_up_check());
+	return IRQ_NONE;
+}
+
+
+static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
+	loff_t *off)
+{
+	struct gpio_private *priv = file->private_data;
+	unsigned char data, clk_mask, data_mask, write_msb;
+	unsigned long flags;
+	unsigned long shadow;
+	volatile unsigned long *port;
+	ssize_t retval = count;
+	/* Only bits 0-7 may be used for write operations but allow all
+	   devices except leds... */
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	if (priv->minor == GPIO_MINOR_V)
+		return -EFAULT;
+#endif
+	if (priv->minor == GPIO_MINOR_LEDS)
+		return -EFAULT;
+
+	if (!access_ok(VERIFY_READ, buf, count))
+		return -EFAULT;
+	clk_mask = priv->clk_mask;
+	data_mask = priv->data_mask;
+	/* It must have been configured using the IO_CFG_WRITE_MODE */
+	/* Perhaps a better error code? */
+	if (clk_mask == 0 || data_mask == 0)
+		return -EPERM;
+	write_msb = priv->write_msb;
+	D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
+		"msb: %i\n", count, data_mask, clk_mask, write_msb));
+	port = data_out[priv->minor];
+
+	while (count--) {
+		int i;
+		data = *buf++;
+		if (priv->write_msb) {
+			for (i = 7; i >= 0; i--) {
+				local_irq_save(flags);
+				shadow = *port;
+				*port = shadow &= ~clk_mask;
+				if (data & 1<<i)
+					*port = shadow |= data_mask;
+				else
+					*port = shadow &= ~data_mask;
+			/* For FPGA: min 5.0ns (DCC) before CCLK high */
+				*port = shadow |= clk_mask;
+				local_irq_restore(flags);
+			}
+		} else {
+			for (i = 0; i <= 7; i++) {
+				local_irq_save(flags);
+				shadow = *port;
+				*port = shadow &= ~clk_mask;
+				if (data & 1<<i)
+					*port = shadow |= data_mask;
+				else
+					*port = shadow &= ~data_mask;
+			/* For FPGA: min 5.0ns (DCC) before CCLK high */
+				*port = shadow |= clk_mask;
+				local_irq_restore(flags);
+			}
+		}
+	}
+	return retval;
+}
+
+
+
+static int
+gpio_open(struct inode *inode, struct file *filp)
+{
+	struct gpio_private *priv;
+	int p = iminor(inode);
+
+	if (p > GPIO_MINOR_LAST)
+		return -EINVAL;
+
+	priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_lock(&gpio_mutex);
+	memset(priv, 0, sizeof(*priv));
+
+	priv->minor = p;
+
+	/* initialize the io/alarm struct */
+
+	priv->clk_mask = 0;
+	priv->data_mask = 0;
+	priv->highalarm = 0;
+	priv->lowalarm = 0;
+	init_waitqueue_head(&priv->alarm_wq);
+
+	filp->private_data = (void *)priv;
+
+	/* link it into our alarmlist */
+	spin_lock_irq(&alarm_lock);
+	priv->next = alarmlist;
+	alarmlist = priv;
+	spin_unlock_irq(&alarm_lock);
+
+	mutex_unlock(&gpio_mutex);
+	return 0;
+}
+
+static int
+gpio_release(struct inode *inode, struct file *filp)
+{
+	struct gpio_private *p;
+	struct gpio_private *todel;
+	/* local copies while updating them: */
+	unsigned long a_high, a_low;
+	unsigned long some_alarms;
+
+	/* unlink from alarmlist and free the private structure */
+
+	spin_lock_irq(&alarm_lock);
+	p = alarmlist;
+	todel = filp->private_data;
+
+	if (p == todel) {
+		alarmlist = todel->next;
+	} else {
+		while (p->next != todel)
+			p = p->next;
+		p->next = todel->next;
+	}
+
+	kfree(todel);
+	/* Check if there are still any alarms set */
+	p = alarmlist;
+	some_alarms = 0;
+	a_high = 0;
+	a_low = 0;
+	while (p) {
+		if (p->minor == GPIO_MINOR_A) {
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+			p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
+#endif
+			a_high |= p->highalarm;
+			a_low |= p->lowalarm;
+		}
+
+		if (p->highalarm | p->lowalarm)
+			some_alarms = 1;
+		p = p->next;
+	}
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	/* Variables 'some_alarms' and 'a_low' needs to be set here again
+	 * to ensure that interrupt for virtual GPIO is handled.
+	 */
+	some_alarms = 1;
+	a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
+#endif
+
+	gpio_some_alarms = some_alarms;
+	gpio_pa_high_alarms = a_high;
+	gpio_pa_low_alarms = a_low;
+	spin_unlock_irq(&alarm_lock);
+
+	return 0;
+}
+
+/* Main device API. ioctl's to read/set/clear bits, as well as to
+ * set alarms to wait for using a subsequent select().
+ */
+
+inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
+{
+	/* Set direction 0=unchanged 1=input,
+	 * return mask with 1=input
+	 */
+	unsigned long flags;
+	unsigned long dir_shadow;
+
+	local_irq_save(flags);
+	dir_shadow = *dir_oe[priv->minor];
+	dir_shadow &= ~(arg & changeable_dir[priv->minor]);
+	*dir_oe[priv->minor] = dir_shadow;
+	local_irq_restore(flags);
+
+	if (priv->minor == GPIO_MINOR_A)
+		dir_shadow ^= 0xFF;    /* Only 8 bits */
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	else if (priv->minor == GPIO_MINOR_V)
+		dir_shadow ^= 0xFFFF;  /* Only 16 bits */
+#endif
+	else
+		dir_shadow ^= 0x3FFFF; /* Only 18 bits */
+	return dir_shadow;
+
+} /* setget_input */
+
+inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
+{
+	unsigned long flags;
+	unsigned long dir_shadow;
+
+	local_irq_save(flags);
+	dir_shadow = *dir_oe[priv->minor];
+	dir_shadow |=  (arg & changeable_dir[priv->minor]);
+	*dir_oe[priv->minor] = dir_shadow;
+	local_irq_restore(flags);
+	return dir_shadow;
+} /* setget_output */
+
+static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+
+static int
+gpio_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	unsigned long flags;
+	unsigned long val;
+	unsigned long shadow;
+	struct gpio_private *priv = file->private_data;
+	if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
+		return -EINVAL;
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	if (priv->minor == GPIO_MINOR_V)
+		return virtual_gpio_ioctl(file, cmd, arg);
+#endif
+
+	switch (_IOC_NR(cmd)) {
+	case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
+		/* Read the port. */
+		return *data_in[priv->minor];
+		break;
+	case IO_SETBITS:
+		local_irq_save(flags);
+		/* Set changeable bits with a 1 in arg. */
+		shadow = *data_out[priv->minor];
+		shadow |=  (arg & changeable_bits[priv->minor]);
+		*data_out[priv->minor] = shadow;
+		local_irq_restore(flags);
+		break;
+	case IO_CLRBITS:
+		local_irq_save(flags);
+		/* Clear changeable bits with a 1 in arg. */
+		shadow = *data_out[priv->minor];
+		shadow &=  ~(arg & changeable_bits[priv->minor]);
+		*data_out[priv->minor] = shadow;
+		local_irq_restore(flags);
+		break;
+	case IO_HIGHALARM:
+		/* Set alarm when bits with 1 in arg go high. */
+		priv->highalarm |= arg;
+		spin_lock_irqsave(&alarm_lock, flags);
+		gpio_some_alarms = 1;
+		if (priv->minor == GPIO_MINOR_A)
+			gpio_pa_high_alarms |= arg;
+		spin_unlock_irqrestore(&alarm_lock, flags);
+		break;
+	case IO_LOWALARM:
+		/* Set alarm when bits with 1 in arg go low. */
+		priv->lowalarm |= arg;
+		spin_lock_irqsave(&alarm_lock, flags);
+		gpio_some_alarms = 1;
+		if (priv->minor == GPIO_MINOR_A)
+			gpio_pa_low_alarms |= arg;
+		spin_unlock_irqrestore(&alarm_lock, flags);
+		break;
+	case IO_CLRALARM:
+		/* Clear alarm for bits with 1 in arg. */
+		priv->highalarm &= ~arg;
+		priv->lowalarm  &= ~arg;
+		spin_lock_irqsave(&alarm_lock, flags);
+		if (priv->minor == GPIO_MINOR_A) {
+			if (gpio_pa_high_alarms & arg ||
+			    gpio_pa_low_alarms & arg)
+				/* Must update the gpio_pa_*alarms masks */
+				;
+		}
+		spin_unlock_irqrestore(&alarm_lock, flags);
+		break;
+	case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
+		/* Read direction 0=input 1=output */
+		return *dir_oe[priv->minor];
+	case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
+		/* Set direction 0=unchanged 1=input,
+		 * return mask with 1=input
+		 */
+		return setget_input(priv, arg);
+		break;
+	case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
+		/* Set direction 0=unchanged 1=output,
+		 * return mask with 1=output
+		 */
+		return setget_output(priv, arg);
+
+	case IO_CFG_WRITE_MODE:
+	{
+		unsigned long dir_shadow;
+		dir_shadow = *dir_oe[priv->minor];
+
+		priv->clk_mask = arg & 0xFF;
+		priv->data_mask = (arg >> 8) & 0xFF;
+		priv->write_msb = (arg >> 16) & 0x01;
+		/* Check if we're allowed to change the bits and
+		 * the direction is correct
+		 */
+		if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
+		      (priv->data_mask & changeable_bits[priv->minor]) &&
+		      (priv->clk_mask & dir_shadow) &&
+		      (priv->data_mask & dir_shadow))) {
+			priv->clk_mask = 0;
+			priv->data_mask = 0;
+			return -EPERM;
+		}
+		break;
+	}
+	case IO_READ_INBITS:
+		/* *arg is result of reading the input pins */
+		val = *data_in[priv->minor];
+		if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+			return -EFAULT;
+		return 0;
+		break;
+	case IO_READ_OUTBITS:
+		 /* *arg is result of reading the output shadow */
+		val = *data_out[priv->minor];
+		if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+			return -EFAULT;
+		break;
+	case IO_SETGET_INPUT:
+		/* bits set in *arg is set to input,
+		 * *arg updated with current input pins.
+		 */
+		if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+			return -EFAULT;
+		val = setget_input(priv, val);
+		if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+			return -EFAULT;
+		break;
+	case IO_SETGET_OUTPUT:
+		/* bits set in *arg is set to output,
+		 * *arg updated with current output pins.
+		 */
+		if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+			return -EFAULT;
+		val = setget_output(priv, val);
+		if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+			return -EFAULT;
+		break;
+	default:
+		if (priv->minor == GPIO_MINOR_LEDS)
+			return gpio_leds_ioctl(cmd, arg);
+		else
+			return -EINVAL;
+	} /* switch */
+
+	return 0;
+}
+
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+       long ret;
+
+       mutex_lock(&gpio_mutex);
+       ret = gpio_ioctl_unlocked(file, cmd, arg);
+       mutex_unlock(&gpio_mutex);
+
+       return ret;
+}
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static int
+virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	unsigned long flags;
+	unsigned short val;
+	unsigned short shadow;
+	struct gpio_private *priv = file->private_data;
+
+	switch (_IOC_NR(cmd)) {
+	case IO_SETBITS:
+		local_irq_save(flags);
+		/* Set changeable bits with a 1 in arg. */
+		i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+		shadow |= ~*dir_oe[priv->minor];
+		shadow |= (arg & changeable_bits[priv->minor]);
+		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+		local_irq_restore(flags);
+		break;
+	case IO_CLRBITS:
+		local_irq_save(flags);
+		/* Clear changeable bits with a 1 in arg. */
+		i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+		shadow |= ~*dir_oe[priv->minor];
+		shadow &= ~(arg & changeable_bits[priv->minor]);
+		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+		local_irq_restore(flags);
+		break;
+	case IO_HIGHALARM:
+		/* Set alarm when bits with 1 in arg go high. */
+		priv->highalarm |= arg;
+		spin_lock(&alarm_lock);
+		gpio_some_alarms = 1;
+		spin_unlock(&alarm_lock);
+		break;
+	case IO_LOWALARM:
+		/* Set alarm when bits with 1 in arg go low. */
+		priv->lowalarm |= arg;
+		spin_lock(&alarm_lock);
+		gpio_some_alarms = 1;
+		spin_unlock(&alarm_lock);
+		break;
+	case IO_CLRALARM:
+		/* Clear alarm for bits with 1 in arg. */
+		priv->highalarm &= ~arg;
+		priv->lowalarm  &= ~arg;
+		spin_lock(&alarm_lock);
+		spin_unlock(&alarm_lock);
+		break;
+	case IO_CFG_WRITE_MODE:
+	{
+		unsigned long dir_shadow;
+		dir_shadow = *dir_oe[priv->minor];
+
+		priv->clk_mask = arg & 0xFF;
+		priv->data_mask = (arg >> 8) & 0xFF;
+		priv->write_msb = (arg >> 16) & 0x01;
+		/* Check if we're allowed to change the bits and
+		 * the direction is correct
+		 */
+		if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
+		      (priv->data_mask & changeable_bits[priv->minor]) &&
+		      (priv->clk_mask & dir_shadow) &&
+		      (priv->data_mask & dir_shadow))) {
+			priv->clk_mask = 0;
+			priv->data_mask = 0;
+			return -EPERM;
+		}
+		break;
+	}
+	case IO_READ_INBITS:
+		/* *arg is result of reading the input pins */
+		val = cached_virtual_gpio_read;
+		val &= ~*dir_oe[priv->minor];
+		if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+			return -EFAULT;
+		return 0;
+		break;
+	case IO_READ_OUTBITS:
+		 /* *arg is result of reading the output shadow */
+		i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
+		val &= *dir_oe[priv->minor];
+		if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+			return -EFAULT;
+		break;
+	case IO_SETGET_INPUT:
+	{
+		/* bits set in *arg is set to input,
+		 * *arg updated with current input pins.
+		 */
+		unsigned short input_mask = ~*dir_oe[priv->minor];
+		if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+			return -EFAULT;
+		val = setget_input(priv, val);
+		if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+			return -EFAULT;
+		if ((input_mask & val) != input_mask) {
+			/* Input pins changed. All ports desired as input
+			 * should be set to logic 1.
+			 */
+			unsigned short change = input_mask ^ val;
+			i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
+				sizeof(shadow));
+			shadow &= ~change;
+			shadow |= val;
+			i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
+				sizeof(shadow));
+		}
+		break;
+	}
+	case IO_SETGET_OUTPUT:
+		/* bits set in *arg is set to output,
+		 * *arg updated with current output pins.
+		 */
+		if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+			return -EFAULT;
+		val = setget_output(priv, val);
+		if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+			return -EFAULT;
+		break;
+	default:
+		return -EINVAL;
+	} /* switch */
+  return 0;
+}
+#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
+{
+	unsigned char green;
+	unsigned char red;
+
+	switch (_IOC_NR(cmd)) {
+	case IO_LEDACTIVE_SET:
+		green = ((unsigned char) arg) & 1;
+		red   = (((unsigned char) arg) >> 1) & 1;
+		CRIS_LED_ACTIVE_SET_G(green);
+		CRIS_LED_ACTIVE_SET_R(red);
+		break;
+
+	default:
+		return -EINVAL;
+	} /* switch */
+
+	return 0;
+}
+
+static const struct file_operations gpio_fops = {
+	.owner		= THIS_MODULE,
+	.poll		= gpio_poll,
+	.unlocked_ioctl	= gpio_ioctl,
+	.write		= gpio_write,
+	.open		= gpio_open,
+	.release	= gpio_release,
+	.llseek		= noop_llseek,
+};
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static void
+virtual_gpio_init(void)
+{
+	reg_gio_rw_intr_cfg intr_cfg;
+	reg_gio_rw_intr_mask intr_mask;
+	unsigned short shadow;
+
+	shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
+	shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
+	i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+
+	/* Set interrupt mask and on what state the interrupt shall trigger.
+	 * For virtual gpio the interrupt shall trigger on logic '0'.
+	 */
+	intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
+	intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
+
+	switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
+	case 0:
+		intr_cfg.pa0 = regk_gio_lo;
+		intr_mask.pa0 = regk_gio_yes;
+		break;
+	case 1:
+		intr_cfg.pa1 = regk_gio_lo;
+		intr_mask.pa1 = regk_gio_yes;
+		break;
+	case 2:
+		intr_cfg.pa2 = regk_gio_lo;
+		intr_mask.pa2 = regk_gio_yes;
+		break;
+	case 3:
+		intr_cfg.pa3 = regk_gio_lo;
+		intr_mask.pa3 = regk_gio_yes;
+		break;
+	case 4:
+		intr_cfg.pa4 = regk_gio_lo;
+		intr_mask.pa4 = regk_gio_yes;
+		break;
+	case 5:
+		intr_cfg.pa5 = regk_gio_lo;
+		intr_mask.pa5 = regk_gio_yes;
+		break;
+	case 6:
+		intr_cfg.pa6 = regk_gio_lo;
+		intr_mask.pa6 = regk_gio_yes;
+		break;
+	case 7:
+		intr_cfg.pa7 = regk_gio_lo;
+		intr_mask.pa7 = regk_gio_yes;
+	break;
+	}
+
+	REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
+	REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
+
+	gpio_pa_low_alarms |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
+	gpio_some_alarms = 1;
+}
+#endif
+
+/* main driver initialization routine, called from mem.c */
+
+static __init int
+gpio_init(void)
+{
+	int res;
+
+	/* do the formalities */
+
+	res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
+	if (res < 0) {
+		printk(KERN_ERR "gpio: couldn't get a major number.\n");
+		return res;
+	}
+
+	/* Clear all leds */
+	CRIS_LED_NETWORK_GRP0_SET(0);
+	CRIS_LED_NETWORK_GRP1_SET(0);
+	CRIS_LED_ACTIVE_SET(0);
+	CRIS_LED_DISK_READ(0);
+	CRIS_LED_DISK_WRITE(0);
+
+	printk(KERN_INFO "ETRAX FS GPIO driver v2.5, (c) 2003-2007 "
+		"Axis Communications AB\n");
+	/* We call etrax_gpio_wake_up_check() from timer interrupt */
+	if (request_irq(TIMER0_INTR_VECT, gpio_poll_timer_interrupt,
+			IRQF_SHARED, "gpio poll", &alarmlist))
+		printk(KERN_ERR "timer0 irq for gpio\n");
+
+	if (request_irq(GIO_INTR_VECT, gpio_pa_interrupt,
+			IRQF_SHARED, "gpio PA", &alarmlist))
+		printk(KERN_ERR "PA irq for gpio\n");
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	virtual_gpio_init();
+#endif
+
+	return res;
+}
+
+/* this makes sure that gpio_init is called during kernel boot */
+
+module_init(gpio_init);
diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
new file mode 100644
index 000000000..e03238454
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
@@ -0,0 +1,174 @@
+/*
+ *  arch/cris/arch-v32/drivers/nandflash.c
+ *
+ *  Copyright (c) 2004
+ *
+ *  Derived from drivers/mtd/nand/spia.c
+ *	  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <arch/memmap.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/gio_defs.h>
+#include <hwregs/bif_core_defs.h>
+#include <asm/io.h>
+
+#define CE_BIT 4
+#define CLE_BIT 5
+#define ALE_BIT 6
+#define BY_BIT 7
+
+struct mtd_info_wrapper {
+	struct mtd_info info;
+	struct nand_chip chip;
+};
+
+/* Bitmask for control pins */
+#define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT))
+
+/* Bitmask for mtd nand control bits */
+#define CTRL_BITMASK (NAND_NCE | NAND_CLE | NAND_ALE)
+
+
+static struct mtd_info *crisv32_mtd;
+/*
+ *	hardware specific access to control-lines
+ */
+static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd,
+			      unsigned int ctrl)
+{
+	unsigned long flags;
+	reg_gio_rw_pa_dout dout;
+	struct nand_chip *this = mtd->priv;
+
+	local_irq_save(flags);
+
+	/* control bits change */
+	if (ctrl & NAND_CTRL_CHANGE) {
+		dout = REG_RD(gio, regi_gio, rw_pa_dout);
+		dout.data &= ~PIN_BITMASK;
+
+#if (CE_BIT == 4 && NAND_NCE == 1 &&  \
+     CLE_BIT == 5 && NAND_CLE == 2 && \
+     ALE_BIT == 6 && NAND_ALE == 4)
+		/* Pins in same order as control bits, but shifted.
+		 * Optimize for this case; works for 2.6.18 */
+		dout.data |= ((ctrl & CTRL_BITMASK) ^ NAND_NCE) << CE_BIT;
+#else
+		/* the slow way */
+		if (!(ctrl & NAND_NCE))
+			dout.data |= (1 << CE_BIT);
+		if (ctrl & NAND_CLE)
+			dout.data |= (1 << CLE_BIT);
+		if (ctrl & NAND_ALE)
+			dout.data |= (1 << ALE_BIT);
+#endif
+		REG_WR(gio, regi_gio, rw_pa_dout, dout);
+	}
+
+	/* command to chip */
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+
+	local_irq_restore(flags);
+}
+
+/*
+*	read device ready pin
+*/
+static int crisv32_device_ready(struct mtd_info *mtd)
+{
+	reg_gio_r_pa_din din = REG_RD(gio, regi_gio, r_pa_din);
+	return ((din.data & (1 << BY_BIT)) >> BY_BIT);
+}
+
+/*
+ * Main initialization routine
+ */
+struct mtd_info *__init crisv32_nand_flash_probe(void)
+{
+	void __iomem *read_cs;
+	void __iomem *write_cs;
+
+	reg_bif_core_rw_grp3_cfg bif_cfg = REG_RD(bif_core, regi_bif_core,
+		rw_grp3_cfg);
+	reg_gio_rw_pa_oe pa_oe = REG_RD(gio, regi_gio, rw_pa_oe);
+	struct mtd_info_wrapper *wrapper;
+	struct nand_chip *this;
+	int err = 0;
+
+	/* Allocate memory for MTD device structure and private data */
+	wrapper = kzalloc(sizeof(struct mtd_info_wrapper), GFP_KERNEL);
+	if (!wrapper) {
+		printk(KERN_ERR "Unable to allocate CRISv32 NAND MTD "
+			"device structure.\n");
+		err = -ENOMEM;
+		return NULL;
+	}
+
+	read_cs = ioremap(MEM_CSP0_START | MEM_NON_CACHEABLE, 8192);
+	write_cs = ioremap(MEM_CSP1_START | MEM_NON_CACHEABLE, 8192);
+
+	if (!read_cs || !write_cs) {
+		printk(KERN_ERR "CRISv32 NAND ioremap failed\n");
+		err = -EIO;
+		goto out_mtd;
+	}
+
+	/* Get pointer to private data */
+	this = &wrapper->chip;
+	crisv32_mtd = &wrapper->info;
+
+	pa_oe.oe |= 1 << CE_BIT;
+	pa_oe.oe |= 1 << ALE_BIT;
+	pa_oe.oe |= 1 << CLE_BIT;
+	pa_oe.oe &= ~(1 << BY_BIT);
+	REG_WR(gio, regi_gio, rw_pa_oe, pa_oe);
+
+	bif_cfg.gated_csp0 = regk_bif_core_rd;
+	bif_cfg.gated_csp1 = regk_bif_core_wr;
+	REG_WR(bif_core, regi_bif_core, rw_grp3_cfg, bif_cfg);
+
+	/* Link the private data with the MTD structure */
+	crisv32_mtd->priv = this;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = read_cs;
+	this->IO_ADDR_W = write_cs;
+	this->cmd_ctrl = crisv32_hwcontrol;
+	this->dev_ready = crisv32_device_ready;
+	/* 20 us command delay time */
+	this->chip_delay = 20;
+	this->ecc.mode = NAND_ECC_SOFT;
+
+	/* Enable the following for a flash based bad block table */
+	/* this->bbt_options = NAND_BBT_USE_FLASH; */
+
+	/* Scan to find existence of the device */
+	if (nand_scan(crisv32_mtd, 1)) {
+		err = -ENXIO;
+		goto out_ior;
+	}
+
+	return crisv32_mtd;
+
+out_ior:
+	iounmap((void *)read_cs);
+	iounmap((void *)write_cs);
+out_mtd:
+	kfree(wrapper);
+	return NULL;
+}
+