summaryrefslogtreecommitdiff
path: root/arch/cris/arch-v32/mach-a3/dram_init.S
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /arch/cris/arch-v32/mach-a3/dram_init.S
Initial import
Diffstat (limited to 'arch/cris/arch-v32/mach-a3/dram_init.S')
-rw-r--r--arch/cris/arch-v32/mach-a3/dram_init.S118
1 files changed, 118 insertions, 0 deletions
diff --git a/arch/cris/arch-v32/mach-a3/dram_init.S b/arch/cris/arch-v32/mach-a3/dram_init.S
new file mode 100644
index 000000000..ec8648be3
--- /dev/null
+++ b/arch/cris/arch-v32/mach-a3/dram_init.S
@@ -0,0 +1,118 @@
+/*
+ * DDR SDRAM initialization - alter with care
+ * This file is intended to be included from other assembler files
+ *
+ * Note: This file may not modify r8 or r9 because they are used to
+ * carry information from the decompresser to the kernel
+ *
+ * Copyright (C) 2005-2007 Axis Communications AB
+ *
+ * Authors: Mikael Starvik <starvik@axis.com>
+ */
+
+/* Just to be certain the config file is included, we include it here
+ * explicitely instead of depending on it being included in the file that
+ * uses this code.
+ */
+
+#include <hwregs/asm/reg_map_asm.h>
+#include <hwregs/asm/ddr2_defs_asm.h>
+
+ ;; WARNING! The registers r8 and r9 are used as parameters carrying
+ ;; information from the decompressor (if the kernel was compressed).
+ ;; They should not be used in the code below.
+
+ ;; Refer to ddr2 MDS for initialization sequence
+
+ ; 2. Wait 200us
+ move.d 10000, $r2
+1: bne 1b
+ subq 1, $r2
+
+ ; Start clock
+ move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_cfg), $r0
+ move.d REG_STATE(ddr2, rw_phy_cfg, en, yes), $r1
+ move.d $r1, [$r0]
+
+ ; 2. Wait 200us
+ move.d 10000, $r2
+1: bne 1b
+ subq 1, $r2
+
+ ; Reset phy and start calibration
+ move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_ctrl), $r0
+ move.d REG_STATE(ddr2, rw_phy_ctrl, rst, yes) | \
+ REG_STATE(ddr2, rw_phy_ctrl, cal_rst, yes), $r1
+ move.d $r1, [$r0]
+ move.d REG_STATE(ddr2, rw_phy_ctrl, cal_start, yes), $r1
+ move.d $r1, [$r0]
+
+ ; 2. Wait 200us
+ move.d 10000, $r2
+1: bne 1b
+ subq 1, $r2
+
+ ; Issue commands
+ move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_ctrl), $r0
+ move.d sdram_commands_start, $r2
+command_loop:
+ movu.b [$r2+], $r1
+ movu.w [$r2+], $r3
+do_cmd:
+ lslq 16, $r1
+ or.d $r3, $r1
+ move.d $r1, [$r0]
+ ; 2. Wait 200us
+ move.d 10000, $r4
+1: bne 1b
+ subq 1, $r4
+ cmp.d sdram_commands_end, $r2
+ blo command_loop
+ nop
+
+ ; Set timing
+ move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_timing), $r0
+ move.d CONFIG_ETRAX_DDR2_TIMING, $r1
+ move.d $r1, [$r0]
+
+ ; Set latency
+ move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency), $r0
+ move.d CONFIG_ETRAX_DDR2_LATENCY, $r1
+ move.d $r1, [$r0]
+
+ ; Set configuration
+ move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_cfg), $r0
+ move.d CONFIG_ETRAX_DDR2_CONFIG, $r1
+ move.d $r1, [$r0]
+
+ ba after_sdram_commands
+ nop
+
+sdram_commands_start:
+ .byte regk_ddr2_deselect
+ .word 0
+ .byte regk_ddr2_pre
+ .word regk_ddr2_pre_all
+ .byte regk_ddr2_emrs2
+ .word 0
+ .byte regk_ddr2_emrs3
+ .word 0
+ .byte regk_ddr2_emrs
+ .word regk_ddr2_dll_en
+ .byte regk_ddr2_mrs
+ .word regk_ddr2_dll_rst
+ .byte regk_ddr2_pre
+ .word regk_ddr2_pre_all
+ .byte regk_ddr2_ref
+ .word 0
+ .byte regk_ddr2_ref
+ .word 0
+ .byte regk_ddr2_mrs
+ .word CONFIG_ETRAX_DDR2_MRS & 0xffff
+ .byte regk_ddr2_emrs
+ .word regk_ddr2_ocd_default | regk_ddr2_dll_en
+ .byte regk_ddr2_emrs
+ .word regk_ddr2_ocd_exit | regk_ddr2_dll_en | (CONFIG_ETRAX_DDR2_MRS >> 16)
+sdram_commands_end:
+ .align 1
+after_sdram_commands: