Linux-libre 4.4-gnupck-4.4-gnu

6 files changed, 180 insertions, 3 deletions

diff --git a/arch/cris/boot/dts/artpec3.dtsi b/arch/cris/boot/dts/artpec3.dtsi
new file mode 100644
index 000000000..be15be67b
--- /dev/null
+++ b/arch/cris/boot/dts/artpec3.dtsi
@@ -0,0 +1,46 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "axis,crisv32";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		model = "artpec3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		intc: interrupt-controller {
+			compatible = "axis,crisv32-intc";
+			reg = <0xb002a000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gio: gpio@b0020000 {
+			compatible = "axis,artpec3-gio";
+			reg = <0xb0020000 0x1000>;
+			interrupts = <61>;
+			gpio-controller;
+			#gpio-cells = <3>;
+		};
+
+		serial@b003e000 {
+			compatible = "axis,etraxfs-uart";
+			reg = <0xb003e000 0x1000>;
+			interrupts = <64>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/cris/boot/dts/dev88.dts b/arch/cris/boot/dts/dev88.dts
index 4fa5a3f9d..b9a230d10 100644
--- a/arch/cris/boot/dts/dev88.dts
+++ b/arch/cris/boot/dts/dev88.dts
@@ -1,5 +1,7 @@
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
+
 /include/ "etraxfs.dtsi"
 
 / {
@@ -15,4 +17,51 @@
 			status = "okay";
 		};
 	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gio 1 0 0xd>;
+		gpio-miso = <&gio 4 0 0xd>;
+		gpio-mosi = <&gio 0 0 0xd>;
+		cs-gpios = <&gio 3 0 0xd>;
+		num-chipselects = <1>;
+
+		temp-sensor@0 {
+			compatible = "ti,lm70";
+			reg = <0>;
+
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		gpios = <&gio 5 0 0xd>, <&gio 6 0 0xd>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		network {
+			label = "network";
+			gpios = <&gio 2 GPIO_ACTIVE_LOW 0xa>;
+		};
+
+		status {
+			label = "status";
+			gpios = <&gio 3 GPIO_ACTIVE_LOW 0xa>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
 };
diff --git a/arch/cris/boot/dts/etraxfs.dtsi b/arch/cris/boot/dts/etraxfs.dtsi
index 909bcedc3..bf1b8582d 100644
--- a/arch/cris/boot/dts/etraxfs.dtsi
+++ b/arch/cris/boot/dts/etraxfs.dtsi
@@ -28,6 +28,14 @@
 			#interrupt-cells = <1>;
 		};
 
+		gio: gpio@b001a000 {
+			compatible = "axis,etraxfs-gio";
+			reg = <0xb001a000 0x1000>;
+			interrupts = <50>;
+			gpio-controller;
+			#gpio-cells = <3>;
+		};
+
 		serial@b00260000 {
 			compatible = "axis,etraxfs-uart";
 			reg = <0xb0026000 0x1000>;
diff --git a/arch/cris/boot/dts/include/dt-bindings b/arch/cris/boot/dts/include/dt-bindings
new file mode 120000
index 000000000..08c00e497
--- /dev/null
+++ b/arch/cris/boot/dts/include/dt-bindings
@@ -0,0 +1 @@
+../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/cris/boot/dts/p1343.dts b/arch/cris/boot/dts/p1343.dts
new file mode 100644
index 000000000..fab7bdbd0
--- /dev/null
+++ b/arch/cris/boot/dts/p1343.dts
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/include/ "artpec3.dtsi"
+
+/ {
+	model = "Axis P1343 Network Camera";
+	compatible = "axis,p1343";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		uart0: serial@b003e000 {
+			status = "okay";
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		gpios = <&gio 3 0 0xa>, <&gio 2 0 0xa>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_green {
+			label = "status:green";
+			gpios = <&gio 0 GPIO_ACTIVE_LOW 0xc>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		status_red {
+			label = "status:red";
+			gpios = <&gio 1 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		network_green {
+			label = "network:green";
+			gpios = <&gio 2 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		network_red {
+			label = "network:red";
+			gpios = <&gio 3 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		power_red {
+			label = "power:red";
+			gpios = <&gio 4 GPIO_ACTIVE_LOW 0xc>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		activity-button@0 {
+			label = "Activity Button";
+			linux,code = <KEY_FN>;
+			gpios = <&gio 13 GPIO_ACTIVE_LOW 0xd>;
+		};
+	};
+};
diff --git a/arch/cris/boot/rescue/head_v10.S b/arch/cris/boot/rescue/head_v10.S
index af55df099..1c05492f3 100644
--- a/arch/cris/boot/rescue/head_v10.S
+++ b/arch/cris/boot/rescue/head_v10.S
@@ -281,9 +281,6 @@ wait_ser:
 #ifdef CONFIG_ETRAX_PB_LEDS
 	move.b	$r2, [R_PORT_PB_DATA]
 #endif
-#ifdef CONFIG_ETRAX_90000000_LEDS
-	move.b	$r2, [0x90000000]
-#endif
 #endif
 
 	;; check if we got something on the serial port