Initial import

16 files changed, 4091 insertions, 0 deletions

diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
new file mode 100644
index 000000000..a7eec3364
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -0,0 +1,1211 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2000-2001, 2006-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+ /*
+  * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp
+  */
+
+#ifndef _AU1000_H_
+#define _AU1000_H_
+
+/* SOC Interrupt numbers */
+/* Au1000-style (IC0/1): 2 controllers with 32 sources each */
+#define AU1000_INTC0_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
+#define AU1000_INTC0_INT_LAST	(AU1000_INTC0_INT_BASE + 31)
+#define AU1000_INTC1_INT_BASE	(AU1000_INTC0_INT_LAST + 1)
+#define AU1000_INTC1_INT_LAST	(AU1000_INTC1_INT_BASE + 31)
+#define AU1000_MAX_INTR		AU1000_INTC1_INT_LAST
+
+/* Au1300-style (GPIC): 1 controller with up to 128 sources */
+#define ALCHEMY_GPIC_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
+#define ALCHEMY_GPIC_INT_NUM	128
+#define ALCHEMY_GPIC_INT_LAST	(ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1)
+
+/* common clock names, shared among all variants. AUXPLL2 is Au1300 */
+#define ALCHEMY_ROOT_CLK		"root_clk"
+#define ALCHEMY_CPU_CLK			"cpu_clk"
+#define ALCHEMY_AUXPLL_CLK		"auxpll_clk"
+#define ALCHEMY_AUXPLL2_CLK		"auxpll2_clk"
+#define ALCHEMY_SYSBUS_CLK		"sysbus_clk"
+#define ALCHEMY_PERIPH_CLK		"periph_clk"
+#define ALCHEMY_MEM_CLK			"mem_clk"
+#define ALCHEMY_LR_CLK			"lr_clk"
+#define ALCHEMY_FG0_CLK			"fg0_clk"
+#define ALCHEMY_FG1_CLK			"fg1_clk"
+#define ALCHEMY_FG2_CLK			"fg2_clk"
+#define ALCHEMY_FG3_CLK			"fg3_clk"
+#define ALCHEMY_FG4_CLK			"fg4_clk"
+#define ALCHEMY_FG5_CLK			"fg5_clk"
+
+/* Au1300 peripheral interrupt numbers */
+#define AU1300_FIRST_INT	(ALCHEMY_GPIC_INT_BASE)
+#define AU1300_UART1_INT	(AU1300_FIRST_INT + 17)
+#define AU1300_UART2_INT	(AU1300_FIRST_INT + 25)
+#define AU1300_UART3_INT	(AU1300_FIRST_INT + 27)
+#define AU1300_SD1_INT		(AU1300_FIRST_INT + 32)
+#define AU1300_SD2_INT		(AU1300_FIRST_INT + 38)
+#define AU1300_PSC0_INT		(AU1300_FIRST_INT + 48)
+#define AU1300_PSC1_INT		(AU1300_FIRST_INT + 52)
+#define AU1300_PSC2_INT		(AU1300_FIRST_INT + 56)
+#define AU1300_PSC3_INT		(AU1300_FIRST_INT + 60)
+#define AU1300_NAND_INT		(AU1300_FIRST_INT + 62)
+#define AU1300_DDMA_INT		(AU1300_FIRST_INT + 75)
+#define AU1300_MMU_INT		(AU1300_FIRST_INT + 76)
+#define AU1300_MPU_INT		(AU1300_FIRST_INT + 77)
+#define AU1300_GPU_INT		(AU1300_FIRST_INT + 78)
+#define AU1300_UDMA_INT		(AU1300_FIRST_INT + 79)
+#define AU1300_TOY_INT		(AU1300_FIRST_INT + 80)
+#define AU1300_TOY_MATCH0_INT	(AU1300_FIRST_INT + 81)
+#define AU1300_TOY_MATCH1_INT	(AU1300_FIRST_INT + 82)
+#define AU1300_TOY_MATCH2_INT	(AU1300_FIRST_INT + 83)
+#define AU1300_RTC_INT		(AU1300_FIRST_INT + 84)
+#define AU1300_RTC_MATCH0_INT	(AU1300_FIRST_INT + 85)
+#define AU1300_RTC_MATCH1_INT	(AU1300_FIRST_INT + 86)
+#define AU1300_RTC_MATCH2_INT	(AU1300_FIRST_INT + 87)
+#define AU1300_UART0_INT	(AU1300_FIRST_INT + 88)
+#define AU1300_SD0_INT		(AU1300_FIRST_INT + 89)
+#define AU1300_USB_INT		(AU1300_FIRST_INT + 90)
+#define AU1300_LCD_INT		(AU1300_FIRST_INT + 91)
+#define AU1300_BSA_INT		(AU1300_FIRST_INT + 92)
+#define AU1300_MPE_INT		(AU1300_FIRST_INT + 93)
+#define AU1300_ITE_INT		(AU1300_FIRST_INT + 94)
+#define AU1300_AES_INT		(AU1300_FIRST_INT + 95)
+#define AU1300_CIM_INT		(AU1300_FIRST_INT + 96)
+
+/**********************************************************************/
+
+/*
+ * Physical base addresses for integrated peripherals
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300
+ */
+
+#define AU1000_AC97_PHYS_ADDR		0x10000000 /* 012 */
+#define AU1300_ROM_PHYS_ADDR		0x10000000 /* 5 */
+#define AU1300_OTP_PHYS_ADDR		0x10002000 /* 5 */
+#define AU1300_VSS_PHYS_ADDR		0x10003000 /* 5 */
+#define AU1300_UART0_PHYS_ADDR		0x10100000 /* 5 */
+#define AU1300_UART1_PHYS_ADDR		0x10101000 /* 5 */
+#define AU1300_UART2_PHYS_ADDR		0x10102000 /* 5 */
+#define AU1300_UART3_PHYS_ADDR		0x10103000 /* 5 */
+#define AU1000_USB_OHCI_PHYS_ADDR	0x10100000 /* 012 */
+#define AU1000_USB_UDC_PHYS_ADDR	0x10200000 /* 0123 */
+#define AU1300_GPIC_PHYS_ADDR		0x10200000 /* 5 */
+#define AU1000_IRDA_PHYS_ADDR		0x10300000 /* 02 */
+#define AU1200_AES_PHYS_ADDR		0x10300000 /* 45 */
+#define AU1000_IC0_PHYS_ADDR		0x10400000 /* 01234 */
+#define AU1300_GPU_PHYS_ADDR		0x10500000 /* 5 */
+#define AU1000_MAC0_PHYS_ADDR		0x10500000 /* 023 */
+#define AU1000_MAC1_PHYS_ADDR		0x10510000 /* 023 */
+#define AU1000_MACEN_PHYS_ADDR		0x10520000 /* 023 */
+#define AU1100_SD0_PHYS_ADDR		0x10600000 /* 245 */
+#define AU1300_SD1_PHYS_ADDR		0x10601000 /* 5 */
+#define AU1300_SD2_PHYS_ADDR		0x10602000 /* 5 */
+#define AU1100_SD1_PHYS_ADDR		0x10680000 /* 24 */
+#define AU1300_SYS_PHYS_ADDR		0x10900000 /* 5 */
+#define AU1550_PSC2_PHYS_ADDR		0x10A00000 /* 3 */
+#define AU1550_PSC3_PHYS_ADDR		0x10B00000 /* 3 */
+#define AU1300_PSC0_PHYS_ADDR		0x10A00000 /* 5 */
+#define AU1300_PSC1_PHYS_ADDR		0x10A01000 /* 5 */
+#define AU1300_PSC2_PHYS_ADDR		0x10A02000 /* 5 */
+#define AU1300_PSC3_PHYS_ADDR		0x10A03000 /* 5 */
+#define AU1000_I2S_PHYS_ADDR		0x11000000 /* 02 */
+#define AU1500_MAC0_PHYS_ADDR		0x11500000 /* 1 */
+#define AU1500_MAC1_PHYS_ADDR		0x11510000 /* 1 */
+#define AU1500_MACEN_PHYS_ADDR		0x11520000 /* 1 */
+#define AU1000_UART0_PHYS_ADDR		0x11100000 /* 01234 */
+#define AU1200_SWCNT_PHYS_ADDR		0x1110010C /* 4 */
+#define AU1000_UART1_PHYS_ADDR		0x11200000 /* 0234 */
+#define AU1000_UART2_PHYS_ADDR		0x11300000 /* 0 */
+#define AU1000_UART3_PHYS_ADDR		0x11400000 /* 0123 */
+#define AU1000_SSI0_PHYS_ADDR		0x11600000 /* 02 */
+#define AU1000_SSI1_PHYS_ADDR		0x11680000 /* 02 */
+#define AU1500_GPIO2_PHYS_ADDR		0x11700000 /* 1234 */
+#define AU1000_IC1_PHYS_ADDR		0x11800000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR		0x11900000 /* 012345 */
+#define AU1550_PSC0_PHYS_ADDR		0x11A00000 /* 34 */
+#define AU1550_PSC1_PHYS_ADDR		0x11B00000 /* 34 */
+#define AU1000_MEM_PHYS_ADDR		0x14000000 /* 01234 */
+#define AU1000_STATIC_MEM_PHYS_ADDR	0x14001000 /* 01234 */
+#define AU1300_UDMA_PHYS_ADDR		0x14001800 /* 5 */
+#define AU1000_DMA_PHYS_ADDR		0x14002000 /* 012 */
+#define AU1550_DBDMA_PHYS_ADDR		0x14002000 /* 345 */
+#define AU1550_DBDMA_CONF_PHYS_ADDR	0x14003000 /* 345 */
+#define AU1000_MACDMA0_PHYS_ADDR	0x14004000 /* 0123 */
+#define AU1000_MACDMA1_PHYS_ADDR	0x14004200 /* 0123 */
+#define AU1200_CIM_PHYS_ADDR		0x14004000 /* 45 */
+#define AU1500_PCI_PHYS_ADDR		0x14005000 /* 13 */
+#define AU1550_PE_PHYS_ADDR		0x14008000 /* 3 */
+#define AU1200_MAEBE_PHYS_ADDR		0x14010000 /* 4 */
+#define AU1200_MAEFE_PHYS_ADDR		0x14012000 /* 4 */
+#define AU1300_MAEITE_PHYS_ADDR		0x14010000 /* 5 */
+#define AU1300_MAEMPE_PHYS_ADDR		0x14014000 /* 5 */
+#define AU1550_USB_OHCI_PHYS_ADDR	0x14020000 /* 3 */
+#define AU1200_USB_CTL_PHYS_ADDR	0x14020000 /* 4 */
+#define AU1200_USB_OTG_PHYS_ADDR	0x14020020 /* 4 */
+#define AU1200_USB_OHCI_PHYS_ADDR	0x14020100 /* 4 */
+#define AU1200_USB_EHCI_PHYS_ADDR	0x14020200 /* 4 */
+#define AU1200_USB_UDC_PHYS_ADDR	0x14022000 /* 4 */
+#define AU1300_USB_EHCI_PHYS_ADDR	0x14020000 /* 5 */
+#define AU1300_USB_OHCI0_PHYS_ADDR	0x14020400 /* 5 */
+#define AU1300_USB_OHCI1_PHYS_ADDR	0x14020800 /* 5 */
+#define AU1300_USB_CTL_PHYS_ADDR	0x14021000 /* 5 */
+#define AU1300_USB_OTG_PHYS_ADDR	0x14022000 /* 5 */
+#define AU1300_MAEBSA_PHYS_ADDR		0x14030000 /* 5 */
+#define AU1100_LCD_PHYS_ADDR		0x15000000 /* 2 */
+#define AU1200_LCD_PHYS_ADDR		0x15000000 /* 45 */
+#define AU1500_PCI_MEM_PHYS_ADDR	0x400000000ULL /* 13 */
+#define AU1500_PCI_IO_PHYS_ADDR		0x500000000ULL /* 13 */
+#define AU1500_PCI_CONFIG0_PHYS_ADDR	0x600000000ULL /* 13 */
+#define AU1500_PCI_CONFIG1_PHYS_ADDR	0x680000000ULL /* 13 */
+#define AU1000_PCMCIA_IO_PHYS_ADDR	0xF00000000ULL /* 012345 */
+#define AU1000_PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL /* 012345 */
+#define AU1000_PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL /* 012345 */
+
+/**********************************************************************/
+
+
+/*
+ * Au1300 GPIO+INT controller (GPIC) register offsets and bits
+ * Registers are 128bits (0x10 bytes), divided into 4 "banks".
+ */
+#define AU1300_GPIC_PINVAL	0x0000
+#define AU1300_GPIC_PINVALCLR	0x0010
+#define AU1300_GPIC_IPEND	0x0020
+#define AU1300_GPIC_PRIENC	0x0030
+#define AU1300_GPIC_IEN		0x0040	/* int_mask in manual */
+#define AU1300_GPIC_IDIS	0x0050	/* int_maskclr in manual */
+#define AU1300_GPIC_DMASEL	0x0060
+#define AU1300_GPIC_DEVSEL	0x0080
+#define AU1300_GPIC_DEVCLR	0x0090
+#define AU1300_GPIC_RSTVAL	0x00a0
+/* pin configuration space. one 32bit register for up to 128 IRQs */
+#define AU1300_GPIC_PINCFG	0x1000
+
+#define GPIC_GPIO_TO_BIT(gpio)	\
+	(1 << ((gpio) & 0x1f))
+
+#define GPIC_GPIO_BANKOFF(gpio) \
+	(((gpio) >> 5) * 4)
+
+/* Pin Control bits: who owns the pin, what does it do */
+#define GPIC_CFG_PC_GPIN		0
+#define GPIC_CFG_PC_DEV			1
+#define GPIC_CFG_PC_GPOLOW		2
+#define GPIC_CFG_PC_GPOHIGH		3
+#define GPIC_CFG_PC_MASK		3
+
+/* assign pin to MIPS IRQ line */
+#define GPIC_CFG_IL_SET(x)	(((x) & 3) << 2)
+#define GPIC_CFG_IL_MASK	(3 << 2)
+
+/* pin interrupt type setup */
+#define GPIC_CFG_IC_OFF		(0 << 4)
+#define GPIC_CFG_IC_LEVEL_LOW	(1 << 4)
+#define GPIC_CFG_IC_LEVEL_HIGH	(2 << 4)
+#define GPIC_CFG_IC_EDGE_FALL	(5 << 4)
+#define GPIC_CFG_IC_EDGE_RISE	(6 << 4)
+#define GPIC_CFG_IC_EDGE_BOTH	(7 << 4)
+#define GPIC_CFG_IC_MASK	(7 << 4)
+
+/* allow interrupt to wake cpu from 'wait' */
+#define GPIC_CFG_IDLEWAKE	(1 << 7)
+
+/***********************************************************************/
+
+/* Au1000 SDRAM memory controller register offsets */
+#define AU1000_MEM_SDMODE0		0x0000
+#define AU1000_MEM_SDMODE1		0x0004
+#define AU1000_MEM_SDMODE2		0x0008
+#define AU1000_MEM_SDADDR0		0x000C
+#define AU1000_MEM_SDADDR1		0x0010
+#define AU1000_MEM_SDADDR2		0x0014
+#define AU1000_MEM_SDREFCFG		0x0018
+#define AU1000_MEM_SDPRECMD		0x001C
+#define AU1000_MEM_SDAUTOREF		0x0020
+#define AU1000_MEM_SDWRMD0		0x0024
+#define AU1000_MEM_SDWRMD1		0x0028
+#define AU1000_MEM_SDWRMD2		0x002C
+#define AU1000_MEM_SDSLEEP		0x0030
+#define AU1000_MEM_SDSMCKE		0x0034
+
+/* MEM_SDMODE register content definitions */
+#define MEM_SDMODE_F		(1 << 22)
+#define MEM_SDMODE_SR		(1 << 21)
+#define MEM_SDMODE_BS		(1 << 20)
+#define MEM_SDMODE_RS		(3 << 18)
+#define MEM_SDMODE_CS		(7 << 15)
+#define MEM_SDMODE_TRAS		(15 << 11)
+#define MEM_SDMODE_TMRD		(3 << 9)
+#define MEM_SDMODE_TWR		(3 << 7)
+#define MEM_SDMODE_TRP		(3 << 5)
+#define MEM_SDMODE_TRCD		(3 << 3)
+#define MEM_SDMODE_TCL		(7 << 0)
+
+#define MEM_SDMODE_BS_2Bank	(0 << 20)
+#define MEM_SDMODE_BS_4Bank	(1 << 20)
+#define MEM_SDMODE_RS_11Row	(0 << 18)
+#define MEM_SDMODE_RS_12Row	(1 << 18)
+#define MEM_SDMODE_RS_13Row	(2 << 18)
+#define MEM_SDMODE_RS_N(N)	((N) << 18)
+#define MEM_SDMODE_CS_7Col	(0 << 15)
+#define MEM_SDMODE_CS_8Col	(1 << 15)
+#define MEM_SDMODE_CS_9Col	(2 << 15)
+#define MEM_SDMODE_CS_10Col	(3 << 15)
+#define MEM_SDMODE_CS_11Col	(4 << 15)
+#define MEM_SDMODE_CS_N(N)	((N) << 15)
+#define MEM_SDMODE_TRAS_N(N)	((N) << 11)
+#define MEM_SDMODE_TMRD_N(N)	((N) << 9)
+#define MEM_SDMODE_TWR_N(N)	((N) << 7)
+#define MEM_SDMODE_TRP_N(N)	((N) << 5)
+#define MEM_SDMODE_TRCD_N(N)	((N) << 3)
+#define MEM_SDMODE_TCL_N(N)	((N) << 0)
+
+/* MEM_SDADDR register contents definitions */
+#define MEM_SDADDR_E		(1 << 20)
+#define MEM_SDADDR_CSBA		(0x03FF << 10)
+#define MEM_SDADDR_CSMASK	(0x03FF << 0)
+#define MEM_SDADDR_CSBA_N(N)	((N) & (0x03FF << 22) >> 12)
+#define MEM_SDADDR_CSMASK_N(N)	((N)&(0x03FF << 22) >> 22)
+
+/* MEM_SDREFCFG register content definitions */
+#define MEM_SDREFCFG_TRC	(15 << 28)
+#define MEM_SDREFCFG_TRPM	(3 << 26)
+#define MEM_SDREFCFG_E		(1 << 25)
+#define MEM_SDREFCFG_RE		(0x1ffffff << 0)
+#define MEM_SDREFCFG_TRC_N(N)	((N) << MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N)	((N) << MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_REF_N(N)	(N)
+
+/* Au1550 SDRAM Register Offsets */
+#define AU1550_MEM_SDMODE0		0x0800
+#define AU1550_MEM_SDMODE1		0x0808
+#define AU1550_MEM_SDMODE2		0x0810
+#define AU1550_MEM_SDADDR0		0x0820
+#define AU1550_MEM_SDADDR1		0x0828
+#define AU1550_MEM_SDADDR2		0x0830
+#define AU1550_MEM_SDCONFIGA		0x0840
+#define AU1550_MEM_SDCONFIGB		0x0848
+#define AU1550_MEM_SDSTAT		0x0850
+#define AU1550_MEM_SDERRADDR		0x0858
+#define AU1550_MEM_SDSTRIDE0		0x0860
+#define AU1550_MEM_SDSTRIDE1		0x0868
+#define AU1550_MEM_SDSTRIDE2		0x0870
+#define AU1550_MEM_SDWRMD0		0x0880
+#define AU1550_MEM_SDWRMD1		0x0888
+#define AU1550_MEM_SDWRMD2		0x0890
+#define AU1550_MEM_SDPRECMD		0x08C0
+#define AU1550_MEM_SDAUTOREF		0x08C8
+#define AU1550_MEM_SDSREF		0x08D0
+#define AU1550_MEM_SDSLEEP		MEM_SDSREF
+
+/* Static Bus Controller register offsets */
+#define AU1000_MEM_STCFG0	0x000
+#define AU1000_MEM_STTIME0	0x004
+#define AU1000_MEM_STADDR0	0x008
+#define AU1000_MEM_STCFG1	0x010
+#define AU1000_MEM_STTIME1	0x014
+#define AU1000_MEM_STADDR1	0x018
+#define AU1000_MEM_STCFG2	0x020
+#define AU1000_MEM_STTIME2	0x024
+#define AU1000_MEM_STADDR2	0x028
+#define AU1000_MEM_STCFG3	0x030
+#define AU1000_MEM_STTIME3	0x034
+#define AU1000_MEM_STADDR3	0x038
+#define AU1000_MEM_STNDCTL	0x100
+#define AU1000_MEM_STSTAT	0x104
+
+#define MEM_STNAND_CMD		0x0
+#define MEM_STNAND_ADDR		0x4
+#define MEM_STNAND_DATA		0x20
+
+
+/* Programmable Counters 0 and 1 */
+#define AU1000_SYS_CNTRCTRL	0x14
+#  define SYS_CNTRL_E1S		(1 << 23)
+#  define SYS_CNTRL_T1S		(1 << 20)
+#  define SYS_CNTRL_M21		(1 << 19)
+#  define SYS_CNTRL_M11		(1 << 18)
+#  define SYS_CNTRL_M01		(1 << 17)
+#  define SYS_CNTRL_C1S		(1 << 16)
+#  define SYS_CNTRL_BP		(1 << 14)
+#  define SYS_CNTRL_EN1		(1 << 13)
+#  define SYS_CNTRL_BT1		(1 << 12)
+#  define SYS_CNTRL_EN0		(1 << 11)
+#  define SYS_CNTRL_BT0		(1 << 10)
+#  define SYS_CNTRL_E0		(1 << 8)
+#  define SYS_CNTRL_E0S		(1 << 7)
+#  define SYS_CNTRL_32S		(1 << 5)
+#  define SYS_CNTRL_T0S		(1 << 4)
+#  define SYS_CNTRL_M20		(1 << 3)
+#  define SYS_CNTRL_M10		(1 << 2)
+#  define SYS_CNTRL_M00		(1 << 1)
+#  define SYS_CNTRL_C0S		(1 << 0)
+
+/* Programmable Counter 0 Registers */
+#define AU1000_SYS_TOYTRIM	0x00
+#define AU1000_SYS_TOYWRITE	0x04
+#define AU1000_SYS_TOYMATCH0	0x08
+#define AU1000_SYS_TOYMATCH1	0x0c
+#define AU1000_SYS_TOYMATCH2	0x10
+#define AU1000_SYS_TOYREAD	0x40
+
+/* Programmable Counter 1 Registers */
+#define AU1000_SYS_RTCTRIM	0x44
+#define AU1000_SYS_RTCWRITE	0x48
+#define AU1000_SYS_RTCMATCH0	0x4c
+#define AU1000_SYS_RTCMATCH1	0x50
+#define AU1000_SYS_RTCMATCH2	0x54
+#define AU1000_SYS_RTCREAD	0x58
+
+
+/* GPIO */
+#define AU1000_SYS_PINFUNC	0x2C
+#  define SYS_PF_USB		(1 << 15)	/* 2nd USB device/host */
+#  define SYS_PF_U3		(1 << 14)	/* GPIO23/U3TXD */
+#  define SYS_PF_U2		(1 << 13)	/* GPIO22/U2TXD */
+#  define SYS_PF_U1		(1 << 12)	/* GPIO21/U1TXD */
+#  define SYS_PF_SRC		(1 << 11)	/* GPIO6/SROMCKE */
+#  define SYS_PF_CK5		(1 << 10)	/* GPIO3/CLK5 */
+#  define SYS_PF_CK4		(1 << 9)	/* GPIO2/CLK4 */
+#  define SYS_PF_IRF		(1 << 8)	/* GPIO15/IRFIRSEL */
+#  define SYS_PF_UR3		(1 << 7)	/* GPIO[14:9]/UART3 */
+#  define SYS_PF_I2D		(1 << 6)	/* GPIO8/I2SDI */
+#  define SYS_PF_I2S		(1 << 5)	/* I2S/GPIO[29:31] */
+#  define SYS_PF_NI2		(1 << 4)	/* NI2/GPIO[24:28] */
+#  define SYS_PF_U0		(1 << 3)	/* U0TXD/GPIO20 */
+#  define SYS_PF_RD		(1 << 2)	/* IRTXD/GPIO19 */
+#  define SYS_PF_A97		(1 << 1)	/* AC97/SSL1 */
+#  define SYS_PF_S0		(1 << 0)	/* SSI_0/GPIO[16:18] */
+
+/* Au1100 only */
+#  define SYS_PF_PC		(1 << 18)	/* PCMCIA/GPIO[207:204] */
+#  define SYS_PF_LCD		(1 << 17)	/* extern lcd/GPIO[203:200] */
+#  define SYS_PF_CS		(1 << 16)	/* EXTCLK0/32KHz to gpio2 */
+#  define SYS_PF_EX0		(1 << 9)	/* GPIO2/clock */
+
+/* Au1550 only.	 Redefines lots of pins */
+#  define SYS_PF_PSC2_MASK	(7 << 17)
+#  define SYS_PF_PSC2_AC97	0
+#  define SYS_PF_PSC2_SPI	0
+#  define SYS_PF_PSC2_I2S	(1 << 17)
+#  define SYS_PF_PSC2_SMBUS	(3 << 17)
+#  define SYS_PF_PSC2_GPIO	(7 << 17)
+#  define SYS_PF_PSC3_MASK	(7 << 20)
+#  define SYS_PF_PSC3_AC97	0
+#  define SYS_PF_PSC3_SPI	0
+#  define SYS_PF_PSC3_I2S	(1 << 20)
+#  define SYS_PF_PSC3_SMBUS	(3 << 20)
+#  define SYS_PF_PSC3_GPIO	(7 << 20)
+#  define SYS_PF_PSC1_S1	(1 << 1)
+#  define SYS_PF_MUST_BE_SET	((1 << 5) | (1 << 2))
+
+/* Au1200 only */
+#define SYS_PINFUNC_DMA		(1 << 31)
+#define SYS_PINFUNC_S0A		(1 << 30)
+#define SYS_PINFUNC_S1A		(1 << 29)
+#define SYS_PINFUNC_LP0		(1 << 28)
+#define SYS_PINFUNC_LP1		(1 << 27)
+#define SYS_PINFUNC_LD16	(1 << 26)
+#define SYS_PINFUNC_LD8		(1 << 25)
+#define SYS_PINFUNC_LD1		(1 << 24)
+#define SYS_PINFUNC_LD0		(1 << 23)
+#define SYS_PINFUNC_P1A		(3 << 21)
+#define SYS_PINFUNC_P1B		(1 << 20)
+#define SYS_PINFUNC_FS3		(1 << 19)
+#define SYS_PINFUNC_P0A		(3 << 17)
+#define SYS_PINFUNC_CS		(1 << 16)
+#define SYS_PINFUNC_CIM		(1 << 15)
+#define SYS_PINFUNC_P1C		(1 << 14)
+#define SYS_PINFUNC_U1T		(1 << 12)
+#define SYS_PINFUNC_U1R		(1 << 11)
+#define SYS_PINFUNC_EX1		(1 << 10)
+#define SYS_PINFUNC_EX0		(1 << 9)
+#define SYS_PINFUNC_U0R		(1 << 8)
+#define SYS_PINFUNC_MC		(1 << 7)
+#define SYS_PINFUNC_S0B		(1 << 6)
+#define SYS_PINFUNC_S0C		(1 << 5)
+#define SYS_PINFUNC_P0B		(1 << 4)
+#define SYS_PINFUNC_U0T		(1 << 3)
+#define SYS_PINFUNC_S1B		(1 << 2)
+
+/* Power Management */
+#define AU1000_SYS_SCRATCH0	0x18
+#define AU1000_SYS_SCRATCH1	0x1c
+#define AU1000_SYS_WAKEMSK	0x34
+#define AU1000_SYS_ENDIAN	0x38
+#define AU1000_SYS_POWERCTRL	0x3c
+#define AU1000_SYS_WAKESRC	0x5c
+#define AU1000_SYS_SLPPWR	0x78
+#define AU1000_SYS_SLEEP	0x7c
+
+#define SYS_WAKEMSK_D2		(1 << 9)
+#define SYS_WAKEMSK_M2		(1 << 8)
+#define SYS_WAKEMSK_GPIO(x)	(1 << (x))
+
+/* Clock Controller */
+#define AU1000_SYS_FREQCTRL0	0x20
+#define AU1000_SYS_FREQCTRL1	0x24
+#define AU1000_SYS_CLKSRC	0x28
+#define AU1000_SYS_CPUPLL	0x60
+#define AU1000_SYS_AUXPLL	0x64
+#define AU1300_SYS_AUXPLL2	0x68
+
+
+/**********************************************************************/
+
+
+/* The PCI chip selects are outside the 32bit space, and since we can't
+ * just program the 36bit addresses into BARs, we have to take a chunk
+ * out of the 32bit space and reserve it for PCI.  When these addresses
+ * are ioremap()ed, they'll be fixed up to the real 36bit address before
+ * being passed to the real ioremap function.
+ */
+#define ALCHEMY_PCI_MEMWIN_START	(AU1500_PCI_MEM_PHYS_ADDR >> 4)
+#define ALCHEMY_PCI_MEMWIN_END		(ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF)
+
+/* for PCI IO it's simpler because we get to do the ioremap ourselves and then
+ * adjust the device's resources.
+ */
+#define ALCHEMY_PCI_IOWIN_START		0x00001000
+#define ALCHEMY_PCI_IOWIN_END		0x0000FFFF
+
+#ifdef CONFIG_PCI
+
+#define IOPORT_RESOURCE_START	0x00001000	/* skip legacy probing */
+#define IOPORT_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_START	0x10000000
+#define IOMEM_RESOURCE_END	0xfffffffffULL
+
+#else
+
+/* Don't allow any legacy ports probing */
+#define IOPORT_RESOURCE_START	0x10000000
+#define IOPORT_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_START	0x10000000
+#define IOMEM_RESOURCE_END	0xfffffffffULL
+
+#endif
+
+/* PCI controller block register offsets */
+#define PCI_REG_CMEM		0x0000
+#define PCI_REG_CONFIG		0x0004
+#define PCI_REG_B2BMASK_CCH	0x0008
+#define PCI_REG_B2BBASE0_VID	0x000C
+#define PCI_REG_B2BBASE1_SID	0x0010
+#define PCI_REG_MWMASK_DEV	0x0014
+#define PCI_REG_MWBASE_REV_CCL	0x0018
+#define PCI_REG_ERR_ADDR	0x001C
+#define PCI_REG_SPEC_INTACK	0x0020
+#define PCI_REG_ID		0x0100
+#define PCI_REG_STATCMD		0x0104
+#define PCI_REG_CLASSREV	0x0108
+#define PCI_REG_PARAM		0x010C
+#define PCI_REG_MBAR		0x0110
+#define PCI_REG_TIMEOUT		0x0140
+
+/* PCI controller block register bits */
+#define PCI_CMEM_E		(1 << 28)	/* enable cacheable memory */
+#define PCI_CMEM_CMBASE(x)	(((x) & 0x3fff) << 14)
+#define PCI_CMEM_CMMASK(x)	((x) & 0x3fff)
+#define PCI_CONFIG_ERD		(1 << 27) /* pci error during R/W */
+#define PCI_CONFIG_ET		(1 << 26) /* error in target mode */
+#define PCI_CONFIG_EF		(1 << 25) /* fatal error */
+#define PCI_CONFIG_EP		(1 << 24) /* parity error */
+#define PCI_CONFIG_EM		(1 << 23) /* multiple errors */
+#define PCI_CONFIG_BM		(1 << 22) /* bad master error */
+#define PCI_CONFIG_PD		(1 << 20) /* PCI Disable */
+#define PCI_CONFIG_BME		(1 << 19) /* Byte Mask Enable for reads */
+#define PCI_CONFIG_NC		(1 << 16) /* mark mem access non-coherent */
+#define PCI_CONFIG_IA		(1 << 15) /* INTA# enabled (target mode) */
+#define PCI_CONFIG_IP		(1 << 13) /* int on PCI_PERR# */
+#define PCI_CONFIG_IS		(1 << 12) /* int on PCI_SERR# */
+#define PCI_CONFIG_IMM		(1 << 11) /* int on master abort */
+#define PCI_CONFIG_ITM		(1 << 10) /* int on target abort (as master) */
+#define PCI_CONFIG_ITT		(1 << 9)  /* int on target abort (as target) */
+#define PCI_CONFIG_IPB		(1 << 8)  /* int on PERR# in bus master acc */
+#define PCI_CONFIG_SIC_NO	(0 << 6)  /* no byte mask changes */
+#define PCI_CONFIG_SIC_BA_ADR	(1 << 6)  /* on byte/hw acc, invert adr bits */
+#define PCI_CONFIG_SIC_HWA_DAT	(2 << 6)  /* on halfword acc, swap data */
+#define PCI_CONFIG_SIC_ALL	(3 << 6)  /* swap data bytes on all accesses */
+#define PCI_CONFIG_ST		(1 << 5)  /* swap data by target transactions */
+#define PCI_CONFIG_SM		(1 << 4)  /* swap data from PCI ctl */
+#define PCI_CONFIG_AEN		(1 << 3)  /* enable internal arbiter */
+#define PCI_CONFIG_R2H		(1 << 2)  /* REQ2# to hi-prio arbiter */
+#define PCI_CONFIG_R1H		(1 << 1)  /* REQ1# to hi-prio arbiter */
+#define PCI_CONFIG_CH		(1 << 0)  /* PCI ctl to hi-prio arbiter */
+#define PCI_B2BMASK_B2BMASK(x)	(((x) & 0xffff) << 16)
+#define PCI_B2BMASK_CCH(x)	((x) & 0xffff) /* 16 upper bits of class code */
+#define PCI_B2BBASE0_VID_B0(x)	(((x) & 0xffff) << 16)
+#define PCI_B2BBASE0_VID_SV(x)	((x) & 0xffff)
+#define PCI_B2BBASE1_SID_B1(x)	(((x) & 0xffff) << 16)
+#define PCI_B2BBASE1_SID_SI(x)	((x) & 0xffff)
+#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16)
+#define PCI_MWMASKDEV_DEVID(x)	((x) & 0xffff)
+#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16)
+#define PCI_MWBASEREVCCL_REV(x)	 (((x) & 0xff) << 8)
+#define PCI_MWBASEREVCCL_CCL(x)	 ((x) & 0xff)
+#define PCI_ID_DID(x)		(((x) & 0xffff) << 16)
+#define PCI_ID_VID(x)		((x) & 0xffff)
+#define PCI_STATCMD_STATUS(x)	(((x) & 0xffff) << 16)
+#define PCI_STATCMD_CMD(x)	((x) & 0xffff)
+#define PCI_CLASSREV_CLASS(x)	(((x) & 0x00ffffff) << 8)
+#define PCI_CLASSREV_REV(x)	((x) & 0xff)
+#define PCI_PARAM_BIST(x)	(((x) & 0xff) << 24)
+#define PCI_PARAM_HT(x)		(((x) & 0xff) << 16)
+#define PCI_PARAM_LT(x)		(((x) & 0xff) << 8)
+#define PCI_PARAM_CLS(x)	((x) & 0xff)
+#define PCI_TIMEOUT_RETRIES(x)	(((x) & 0xff) << 8)	/* max retries */
+#define PCI_TIMEOUT_TO(x)	((x) & 0xff)	/* target ready timeout */
+
+
+/**********************************************************************/
+
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <asm/cpu.h>
+
+/* helpers to access the SYS_* registers */
+static inline unsigned long alchemy_rdsys(int regofs)
+{
+	void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+
+	return __raw_readl(b + regofs);
+}
+
+static inline void alchemy_wrsys(unsigned long v, int regofs)
+{
+	void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+
+	__raw_writel(v, b + regofs);
+	wmb(); /* drain writebuffer */
+}
+
+/* helpers to access static memctrl registers */
+static inline unsigned long alchemy_rdsmem(int regofs)
+{
+	void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR);
+
+	return __raw_readl(b + regofs);
+}
+
+static inline void alchemy_wrsmem(unsigned long v, int regofs)
+{
+	void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR);
+
+	__raw_writel(v, b + regofs);
+	wmb(); /* drain writebuffer */
+}
+
+/* Early Au1000 have a write-only SYS_CPUPLL register. */
+static inline int au1xxx_cpu_has_pll_wo(void)
+{
+	switch (read_c0_prid()) {
+	case 0x00030100:	/* Au1000 DA */
+	case 0x00030201:	/* Au1000 HA */
+	case 0x00030202:	/* Au1000 HB */
+		return 1;
+	}
+	return 0;
+}
+
+/* does CPU need CONFIG[OD] set to fix tons of errata? */
+static inline int au1xxx_cpu_needs_config_od(void)
+{
+	/*
+	 * c0_config.od (bit 19) was write only (and read as 0) on the
+	 * early revisions of Alchemy SOCs.  It disables the bus trans-
+	 * action overlapping and needs to be set to fix various errata.
+	 */
+	switch (read_c0_prid()) {
+	case 0x00030100: /* Au1000 DA */
+	case 0x00030201: /* Au1000 HA */
+	case 0x00030202: /* Au1000 HB */
+	case 0x01030200: /* Au1500 AB */
+	/*
+	 * Au1100/Au1200 errata actually keep silence about this bit,
+	 * so we set it just in case for those revisions that require
+	 * it to be set according to the (now gone) cpu_table.
+	 */
+	case 0x02030200: /* Au1100 AB */
+	case 0x02030201: /* Au1100 BA */
+	case 0x02030202: /* Au1100 BC */
+	case 0x04030201: /* Au1200 AC */
+		return 1;
+	}
+	return 0;
+}
+
+#define ALCHEMY_CPU_UNKNOWN	-1
+#define ALCHEMY_CPU_AU1000	0
+#define ALCHEMY_CPU_AU1500	1
+#define ALCHEMY_CPU_AU1100	2
+#define ALCHEMY_CPU_AU1550	3
+#define ALCHEMY_CPU_AU1200	4
+#define ALCHEMY_CPU_AU1300	5
+
+static inline int alchemy_get_cputype(void)
+{
+	switch (read_c0_prid() & (PRID_OPT_MASK | PRID_COMP_MASK)) {
+	case 0x00030000:
+		return ALCHEMY_CPU_AU1000;
+		break;
+	case 0x01030000:
+		return ALCHEMY_CPU_AU1500;
+		break;
+	case 0x02030000:
+		return ALCHEMY_CPU_AU1100;
+		break;
+	case 0x03030000:
+		return ALCHEMY_CPU_AU1550;
+		break;
+	case 0x04030000:
+	case 0x05030000:
+		return ALCHEMY_CPU_AU1200;
+		break;
+	case 0x800c0000:
+		return ALCHEMY_CPU_AU1300;
+		break;
+	}
+
+	return ALCHEMY_CPU_UNKNOWN;
+}
+
+/* return number of uarts on a given cputype */
+static inline int alchemy_get_uarts(int type)
+{
+	switch (type) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1300:
+		return 4;
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1200:
+		return 2;
+	case ALCHEMY_CPU_AU1100:
+	case ALCHEMY_CPU_AU1550:
+		return 3;
+	}
+	return 0;
+}
+
+/* enable an UART block if it isn't already */
+static inline void alchemy_uart_enable(u32 uart_phys)
+{
+	void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys);
+
+	/* reset, enable clock, deassert reset */
+	if ((__raw_readl(addr + 0x100) & 3) != 3) {
+		__raw_writel(0, addr + 0x100);
+		wmb(); /* drain writebuffer */
+		__raw_writel(1, addr + 0x100);
+		wmb(); /* drain writebuffer */
+	}
+	__raw_writel(3, addr + 0x100);
+	wmb(); /* drain writebuffer */
+}
+
+static inline void alchemy_uart_disable(u32 uart_phys)
+{
+	void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys);
+
+	__raw_writel(0, addr + 0x100);	/* UART_MOD_CNTRL */
+	wmb(); /* drain writebuffer */
+}
+
+static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys);
+	int timeout, i;
+
+	/* check LSR TX_EMPTY bit */
+	timeout = 0xffffff;
+	do {
+		if (__raw_readl(base + 0x1c) & 0x20)
+			break;
+		/* slow down */
+		for (i = 10000; i; i--)
+			asm volatile ("nop");
+	} while (--timeout);
+
+	__raw_writel(c, base + 0x04);	/* tx */
+	wmb(); /* drain writebuffer */
+}
+
+/* return number of ethernet MACs on a given cputype */
+static inline int alchemy_get_macs(int type)
+{
+	switch (type) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1550:
+		return 2;
+	case ALCHEMY_CPU_AU1100:
+		return 1;
+	}
+	return 0;
+}
+
+/* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
+void alchemy_sleep_au1000(void);
+void alchemy_sleep_au1550(void);
+void alchemy_sleep_au1300(void);
+void au_sleep(void);
+
+/* USB: arch/mips/alchemy/common/usb.c */
+enum alchemy_usb_block {
+	ALCHEMY_USB_OHCI0,
+	ALCHEMY_USB_UDC0,
+	ALCHEMY_USB_EHCI0,
+	ALCHEMY_USB_OTG0,
+	ALCHEMY_USB_OHCI1,
+};
+int alchemy_usb_control(int block, int enable);
+
+/* PCI controller platform data */
+struct alchemy_pci_platdata {
+	int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin);
+	int (*board_pci_idsel)(unsigned int devsel, int assert);
+	/* bits to set/clear in PCI_CONFIG register */
+	unsigned long pci_cfg_set;
+	unsigned long pci_cfg_clr;
+};
+
+/* The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's
+ * not used to select FIR/SIR mode on the transceiver but as a GPIO.
+ * Instead a CPLD has to be told about the mode.  The driver calls the
+ * set_phy_mode() function in addition to driving the IRFIRSEL pin.
+ */
+#define AU1000_IRDA_PHY_MODE_OFF	0
+#define AU1000_IRDA_PHY_MODE_SIR	1
+#define AU1000_IRDA_PHY_MODE_FIR	2
+
+struct au1k_irda_platform_data {
+	void (*set_phy_mode)(int mode);
+};
+
+
+/* Multifunction pins: Each of these pins can either be assigned to the
+ * GPIO controller or a on-chip peripheral.
+ * Call "au1300_pinfunc_to_dev()" or "au1300_pinfunc_to_gpio()" to
+ * assign one of these to either the GPIO controller or the device.
+ */
+enum au1300_multifunc_pins {
+	/* wake-from-str pins 0-3 */
+	AU1300_PIN_WAKE0 = 0, AU1300_PIN_WAKE1, AU1300_PIN_WAKE2,
+	AU1300_PIN_WAKE3,
+	/* external clock sources for PSCs: 4-5 */
+	AU1300_PIN_EXTCLK0, AU1300_PIN_EXTCLK1,
+	/* 8bit MMC interface on SD0: 6-9 */
+	AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
+	AU1300_PIN_SD0DAT7,
+	/* aux clk input for freqgen 3: 10 */
+	AU1300_PIN_FG3AUX,
+	/* UART1 pins: 11-18 */
+	AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
+	AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
+	AU1300_PIN_U1RX, AU1300_PIN_U1TX,
+	/* UART0 pins: 19-24 */
+	AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
+	AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
+	/* UART2: 25-26 */
+	AU1300_PIN_U2RX, AU1300_PIN_U2TX,
+	/* UART3: 27-28 */
+	AU1300_PIN_U3RX, AU1300_PIN_U3TX,
+	/* LCD controller PWMs, ext pixclock: 29-31 */
+	AU1300_PIN_LCDPWM0, AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
+	/* SD1 interface: 32-37 */
+	AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
+	AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
+	/* SD2 interface: 38-43 */
+	AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
+	AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
+	/* PSC0/1 clocks: 44-45 */
+	AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
+	/* PSCs: 46-49/50-53/54-57/58-61 */
+	AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
+	AU1300_PIN_PSC0D1,
+	AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
+	AU1300_PIN_PSC1D1,
+	AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_PSC2D0,
+	AU1300_PIN_PSC2D1,
+	AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
+	AU1300_PIN_PSC3D1,
+	/* PCMCIA interface: 62-70 */
+	AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
+	AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
+	AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
+	/* camera interface H/V sync inputs: 71-72 */
+	AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
+	/* PSC2/3 clocks: 73-74 */
+	AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
+};
+
+/* GPIC (Au1300) pin management: arch/mips/alchemy/common/gpioint.c */
+extern void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio);
+extern void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio);
+extern void au1300_set_irq_priority(unsigned int irq, int p);
+extern void au1300_set_dbdma_gpio(int dchan, unsigned int gpio);
+
+/* Au1300 allows to disconnect certain blocks from internal power supply */
+enum au1300_vss_block {
+	AU1300_VSS_MPE = 0,
+	AU1300_VSS_BSA,
+	AU1300_VSS_GPE,
+	AU1300_VSS_MGP,
+};
+
+extern void au1300_vss_block_control(int block, int enable);
+
+enum soc_au1000_ints {
+	AU1000_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1000_UART0_INT	= AU1000_FIRST_INT,
+	AU1000_UART1_INT,
+	AU1000_UART2_INT,
+	AU1000_UART3_INT,
+	AU1000_SSI0_INT,
+	AU1000_SSI1_INT,
+	AU1000_DMA_INT_BASE,
+
+	AU1000_TOY_INT		= AU1000_FIRST_INT + 14,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+	AU1000_IRDA_TX_INT,
+	AU1000_IRDA_RX_INT,
+	AU1000_USB_DEV_REQ_INT,
+	AU1000_USB_DEV_SUS_INT,
+	AU1000_USB_HOST_INT,
+	AU1000_ACSYNC_INT,
+	AU1000_MAC0_DMA_INT,
+	AU1000_MAC1_DMA_INT,
+	AU1000_I2S_UO_INT,
+	AU1000_AC97C_INT,
+	AU1000_GPIO0_INT,
+	AU1000_GPIO1_INT,
+	AU1000_GPIO2_INT,
+	AU1000_GPIO3_INT,
+	AU1000_GPIO4_INT,
+	AU1000_GPIO5_INT,
+	AU1000_GPIO6_INT,
+	AU1000_GPIO7_INT,
+	AU1000_GPIO8_INT,
+	AU1000_GPIO9_INT,
+	AU1000_GPIO10_INT,
+	AU1000_GPIO11_INT,
+	AU1000_GPIO12_INT,
+	AU1000_GPIO13_INT,
+	AU1000_GPIO14_INT,
+	AU1000_GPIO15_INT,
+	AU1000_GPIO16_INT,
+	AU1000_GPIO17_INT,
+	AU1000_GPIO18_INT,
+	AU1000_GPIO19_INT,
+	AU1000_GPIO20_INT,
+	AU1000_GPIO21_INT,
+	AU1000_GPIO22_INT,
+	AU1000_GPIO23_INT,
+	AU1000_GPIO24_INT,
+	AU1000_GPIO25_INT,
+	AU1000_GPIO26_INT,
+	AU1000_GPIO27_INT,
+	AU1000_GPIO28_INT,
+	AU1000_GPIO29_INT,
+	AU1000_GPIO30_INT,
+	AU1000_GPIO31_INT,
+};
+
+enum soc_au1100_ints {
+	AU1100_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1100_UART0_INT	= AU1100_FIRST_INT,
+	AU1100_UART1_INT,
+	AU1100_SD_INT,
+	AU1100_UART3_INT,
+	AU1100_SSI0_INT,
+	AU1100_SSI1_INT,
+	AU1100_DMA_INT_BASE,
+
+	AU1100_TOY_INT		= AU1100_FIRST_INT + 14,
+	AU1100_TOY_MATCH0_INT,
+	AU1100_TOY_MATCH1_INT,
+	AU1100_TOY_MATCH2_INT,
+	AU1100_RTC_INT,
+	AU1100_RTC_MATCH0_INT,
+	AU1100_RTC_MATCH1_INT,
+	AU1100_RTC_MATCH2_INT,
+	AU1100_IRDA_TX_INT,
+	AU1100_IRDA_RX_INT,
+	AU1100_USB_DEV_REQ_INT,
+	AU1100_USB_DEV_SUS_INT,
+	AU1100_USB_HOST_INT,
+	AU1100_ACSYNC_INT,
+	AU1100_MAC0_DMA_INT,
+	AU1100_GPIO208_215_INT,
+	AU1100_LCD_INT,
+	AU1100_AC97C_INT,
+	AU1100_GPIO0_INT,
+	AU1100_GPIO1_INT,
+	AU1100_GPIO2_INT,
+	AU1100_GPIO3_INT,
+	AU1100_GPIO4_INT,
+	AU1100_GPIO5_INT,
+	AU1100_GPIO6_INT,
+	AU1100_GPIO7_INT,
+	AU1100_GPIO8_INT,
+	AU1100_GPIO9_INT,
+	AU1100_GPIO10_INT,
+	AU1100_GPIO11_INT,
+	AU1100_GPIO12_INT,
+	AU1100_GPIO13_INT,
+	AU1100_GPIO14_INT,
+	AU1100_GPIO15_INT,
+	AU1100_GPIO16_INT,
+	AU1100_GPIO17_INT,
+	AU1100_GPIO18_INT,
+	AU1100_GPIO19_INT,
+	AU1100_GPIO20_INT,
+	AU1100_GPIO21_INT,
+	AU1100_GPIO22_INT,
+	AU1100_GPIO23_INT,
+	AU1100_GPIO24_INT,
+	AU1100_GPIO25_INT,
+	AU1100_GPIO26_INT,
+	AU1100_GPIO27_INT,
+	AU1100_GPIO28_INT,
+	AU1100_GPIO29_INT,
+	AU1100_GPIO30_INT,
+	AU1100_GPIO31_INT,
+};
+
+enum soc_au1500_ints {
+	AU1500_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1500_UART0_INT	= AU1500_FIRST_INT,
+	AU1500_PCI_INTA,
+	AU1500_PCI_INTB,
+	AU1500_UART3_INT,
+	AU1500_PCI_INTC,
+	AU1500_PCI_INTD,
+	AU1500_DMA_INT_BASE,
+
+	AU1500_TOY_INT		= AU1500_FIRST_INT + 14,
+	AU1500_TOY_MATCH0_INT,
+	AU1500_TOY_MATCH1_INT,
+	AU1500_TOY_MATCH2_INT,
+	AU1500_RTC_INT,
+	AU1500_RTC_MATCH0_INT,
+	AU1500_RTC_MATCH1_INT,
+	AU1500_RTC_MATCH2_INT,
+	AU1500_PCI_ERR_INT,
+	AU1500_RESERVED_INT,
+	AU1500_USB_DEV_REQ_INT,
+	AU1500_USB_DEV_SUS_INT,
+	AU1500_USB_HOST_INT,
+	AU1500_ACSYNC_INT,
+	AU1500_MAC0_DMA_INT,
+	AU1500_MAC1_DMA_INT,
+	AU1500_AC97C_INT	= AU1500_FIRST_INT + 31,
+	AU1500_GPIO0_INT,
+	AU1500_GPIO1_INT,
+	AU1500_GPIO2_INT,
+	AU1500_GPIO3_INT,
+	AU1500_GPIO4_INT,
+	AU1500_GPIO5_INT,
+	AU1500_GPIO6_INT,
+	AU1500_GPIO7_INT,
+	AU1500_GPIO8_INT,
+	AU1500_GPIO9_INT,
+	AU1500_GPIO10_INT,
+	AU1500_GPIO11_INT,
+	AU1500_GPIO12_INT,
+	AU1500_GPIO13_INT,
+	AU1500_GPIO14_INT,
+	AU1500_GPIO15_INT,
+	AU1500_GPIO200_INT,
+	AU1500_GPIO201_INT,
+	AU1500_GPIO202_INT,
+	AU1500_GPIO203_INT,
+	AU1500_GPIO20_INT,
+	AU1500_GPIO204_INT,
+	AU1500_GPIO205_INT,
+	AU1500_GPIO23_INT,
+	AU1500_GPIO24_INT,
+	AU1500_GPIO25_INT,
+	AU1500_GPIO26_INT,
+	AU1500_GPIO27_INT,
+	AU1500_GPIO28_INT,
+	AU1500_GPIO206_INT,
+	AU1500_GPIO207_INT,
+	AU1500_GPIO208_215_INT,
+};
+
+enum soc_au1550_ints {
+	AU1550_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1550_UART0_INT	= AU1550_FIRST_INT,
+	AU1550_PCI_INTA,
+	AU1550_PCI_INTB,
+	AU1550_DDMA_INT,
+	AU1550_CRYPTO_INT,
+	AU1550_PCI_INTC,
+	AU1550_PCI_INTD,
+	AU1550_PCI_RST_INT,
+	AU1550_UART1_INT,
+	AU1550_UART3_INT,
+	AU1550_PSC0_INT,
+	AU1550_PSC1_INT,
+	AU1550_PSC2_INT,
+	AU1550_PSC3_INT,
+	AU1550_TOY_INT,
+	AU1550_TOY_MATCH0_INT,
+	AU1550_TOY_MATCH1_INT,
+	AU1550_TOY_MATCH2_INT,
+	AU1550_RTC_INT,
+	AU1550_RTC_MATCH0_INT,
+	AU1550_RTC_MATCH1_INT,
+	AU1550_RTC_MATCH2_INT,
+
+	AU1550_NAND_INT		= AU1550_FIRST_INT + 23,
+	AU1550_USB_DEV_REQ_INT,
+	AU1550_USB_DEV_SUS_INT,
+	AU1550_USB_HOST_INT,
+	AU1550_MAC0_DMA_INT,
+	AU1550_MAC1_DMA_INT,
+	AU1550_GPIO0_INT	= AU1550_FIRST_INT + 32,
+	AU1550_GPIO1_INT,
+	AU1550_GPIO2_INT,
+	AU1550_GPIO3_INT,
+	AU1550_GPIO4_INT,
+	AU1550_GPIO5_INT,
+	AU1550_GPIO6_INT,
+	AU1550_GPIO7_INT,
+	AU1550_GPIO8_INT,
+	AU1550_GPIO9_INT,
+	AU1550_GPIO10_INT,
+	AU1550_GPIO11_INT,
+	AU1550_GPIO12_INT,
+	AU1550_GPIO13_INT,
+	AU1550_GPIO14_INT,
+	AU1550_GPIO15_INT,
+	AU1550_GPIO200_INT,
+	AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */
+	AU1550_GPIO16_INT,
+	AU1550_GPIO17_INT,
+	AU1550_GPIO20_INT,
+	AU1550_GPIO21_INT,
+	AU1550_GPIO22_INT,
+	AU1550_GPIO23_INT,
+	AU1550_GPIO24_INT,
+	AU1550_GPIO25_INT,
+	AU1550_GPIO26_INT,
+	AU1550_GPIO27_INT,
+	AU1550_GPIO28_INT,
+	AU1550_GPIO206_INT,
+	AU1550_GPIO207_INT,
+	AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */
+};
+
+enum soc_au1200_ints {
+	AU1200_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1200_UART0_INT	= AU1200_FIRST_INT,
+	AU1200_SWT_INT,
+	AU1200_SD_INT,
+	AU1200_DDMA_INT,
+	AU1200_MAE_BE_INT,
+	AU1200_GPIO200_INT,
+	AU1200_GPIO201_INT,
+	AU1200_GPIO202_INT,
+	AU1200_UART1_INT,
+	AU1200_MAE_FE_INT,
+	AU1200_PSC0_INT,
+	AU1200_PSC1_INT,
+	AU1200_AES_INT,
+	AU1200_CAMERA_INT,
+	AU1200_TOY_INT,
+	AU1200_TOY_MATCH0_INT,
+	AU1200_TOY_MATCH1_INT,
+	AU1200_TOY_MATCH2_INT,
+	AU1200_RTC_INT,
+	AU1200_RTC_MATCH0_INT,
+	AU1200_RTC_MATCH1_INT,
+	AU1200_RTC_MATCH2_INT,
+	AU1200_GPIO203_INT,
+	AU1200_NAND_INT,
+	AU1200_GPIO204_INT,
+	AU1200_GPIO205_INT,
+	AU1200_GPIO206_INT,
+	AU1200_GPIO207_INT,
+	AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */
+	AU1200_USB_INT,
+	AU1200_LCD_INT,
+	AU1200_MAE_BOTH_INT,
+	AU1200_GPIO0_INT,
+	AU1200_GPIO1_INT,
+	AU1200_GPIO2_INT,
+	AU1200_GPIO3_INT,
+	AU1200_GPIO4_INT,
+	AU1200_GPIO5_INT,
+	AU1200_GPIO6_INT,
+	AU1200_GPIO7_INT,
+	AU1200_GPIO8_INT,
+	AU1200_GPIO9_INT,
+	AU1200_GPIO10_INT,
+	AU1200_GPIO11_INT,
+	AU1200_GPIO12_INT,
+	AU1200_GPIO13_INT,
+	AU1200_GPIO14_INT,
+	AU1200_GPIO15_INT,
+	AU1200_GPIO16_INT,
+	AU1200_GPIO17_INT,
+	AU1200_GPIO18_INT,
+	AU1200_GPIO19_INT,
+	AU1200_GPIO20_INT,
+	AU1200_GPIO21_INT,
+	AU1200_GPIO22_INT,
+	AU1200_GPIO23_INT,
+	AU1200_GPIO24_INT,
+	AU1200_GPIO25_INT,
+	AU1200_GPIO26_INT,
+	AU1200_GPIO27_INT,
+	AU1200_GPIO28_INT,
+	AU1200_GPIO29_INT,
+	AU1200_GPIO30_INT,
+	AU1200_GPIO31_INT,
+};
+
+#endif /* !defined (_LANGUAGE_ASSEMBLY) */
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
new file mode 100644
index 000000000..0a0cd4270
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -0,0 +1,453 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Defines for using and allocating DMA channels on the Alchemy
+ *      Au1x00 MIPS processors.
+ *
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_AU1000_DMA_H
+#define __ASM_AU1000_DMA_H
+
+#include <linux/io.h>		/* need byte IO */
+#include <linux/spinlock.h>	/* And spinlocks */
+#include <linux/delay.h>
+
+#define NUM_AU1000_DMA_CHANNELS 8
+
+/* DMA Channel Register Offsets */
+#define DMA_MODE_SET		0x00000000
+#define DMA_MODE_READ		DMA_MODE_SET
+#define DMA_MODE_CLEAR		0x00000004
+/* DMA Mode register bits follow */
+#define DMA_DAH_MASK		(0x0f << 20)
+#define DMA_DID_BIT		16
+#define DMA_DID_MASK		(0x0f << DMA_DID_BIT)
+#define DMA_DS			(1 << 15)
+#define DMA_BE			(1 << 13)
+#define DMA_DR			(1 << 12)
+#define DMA_TS8			(1 << 11)
+#define DMA_DW_BIT		9
+#define DMA_DW_MASK		(0x03 << DMA_DW_BIT)
+#define DMA_DW8			(0 << DMA_DW_BIT)
+#define DMA_DW16		(1 << DMA_DW_BIT)
+#define DMA_DW32		(2 << DMA_DW_BIT)
+#define DMA_NC			(1 << 8)
+#define DMA_IE			(1 << 7)
+#define DMA_HALT		(1 << 6)
+#define DMA_GO			(1 << 5)
+#define DMA_AB			(1 << 4)
+#define DMA_D1			(1 << 3)
+#define DMA_BE1			(1 << 2)
+#define DMA_D0			(1 << 1)
+#define DMA_BE0			(1 << 0)
+
+#define DMA_PERIPHERAL_ADDR	0x00000008
+#define DMA_BUFFER0_START	0x0000000C
+#define DMA_BUFFER1_START	0x00000014
+#define DMA_BUFFER0_COUNT	0x00000010
+#define DMA_BUFFER1_COUNT	0x00000018
+#define DMA_BAH_BIT	16
+#define DMA_BAH_MASK	(0x0f << DMA_BAH_BIT)
+#define DMA_COUNT_BIT	0
+#define DMA_COUNT_MASK	(0xffff << DMA_COUNT_BIT)
+
+/* DMA Device IDs follow */
+enum {
+	DMA_ID_UART0_TX = 0,
+	DMA_ID_UART0_RX,
+	DMA_ID_GP04,
+	DMA_ID_GP05,
+	DMA_ID_AC97C_TX,
+	DMA_ID_AC97C_RX,
+	DMA_ID_UART3_TX,
+	DMA_ID_UART3_RX,
+	DMA_ID_USBDEV_EP0_RX,
+	DMA_ID_USBDEV_EP0_TX,
+	DMA_ID_USBDEV_EP2_TX,
+	DMA_ID_USBDEV_EP3_TX,
+	DMA_ID_USBDEV_EP4_RX,
+	DMA_ID_USBDEV_EP5_RX,
+	DMA_ID_I2S_TX,
+	DMA_ID_I2S_RX,
+	DMA_NUM_DEV
+};
+
+/* DMA Device ID's for 2nd bank (AU1100) follow */
+enum {
+	DMA_ID_SD0_TX = 0,
+	DMA_ID_SD0_RX,
+	DMA_ID_SD1_TX,
+	DMA_ID_SD1_RX,
+	DMA_NUM_DEV_BANK2
+};
+
+struct dma_chan {
+	int dev_id;		/* this channel is allocated if >= 0, */
+				/* free otherwise */
+	void __iomem *io;
+	const char *dev_str;
+	int irq;
+	void *irq_dev;
+	unsigned int fifo_addr;
+	unsigned int mode;
+};
+
+/* These are in arch/mips/au1000/common/dma.c */
+extern struct dma_chan au1000_dma_table[];
+extern int request_au1000_dma(int dev_id,
+			      const char *dev_str,
+			      irq_handler_t irqhandler,
+			      unsigned long irqflags,
+			      void *irq_dev_id);
+extern void free_au1000_dma(unsigned int dmanr);
+extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
+				int length, int *eof, void *data);
+extern void dump_au1000_dma_channel(unsigned int dmanr);
+extern spinlock_t au1000_dma_spin_lock;
+
+static inline struct dma_chan *get_dma_chan(unsigned int dmanr)
+{
+	if (dmanr >= NUM_AU1000_DMA_CHANNELS ||
+	    au1000_dma_table[dmanr].dev_id < 0)
+		return NULL;
+	return &au1000_dma_table[dmanr];
+}
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&au1000_dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&au1000_dma_spin_lock, flags);
+}
+
+/*
+ * Set the DMA buffer enable bits in the mode register.
+ */
+static inline void enable_dma_buffer0(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	__raw_writel(DMA_BE0, chan->io + DMA_MODE_SET);
+}
+
+static inline void enable_dma_buffer1(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	__raw_writel(DMA_BE1, chan->io + DMA_MODE_SET);
+}
+static inline void enable_dma_buffers(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	__raw_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
+}
+
+static inline void start_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	__raw_writel(DMA_GO, chan->io + DMA_MODE_SET);
+}
+
+#define DMA_HALT_POLL 0x5000
+
+static inline void halt_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	int i;
+
+	if (!chan)
+		return;
+	__raw_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
+
+	/* Poll the halt bit */
+	for (i = 0; i < DMA_HALT_POLL; i++)
+		if (__raw_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
+			break;
+	if (i == DMA_HALT_POLL)
+		printk(KERN_INFO "halt_dma: HALT poll expired!\n");
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+
+	halt_dma(dmanr);
+
+	/* Now we can disable the buffers */
+	__raw_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
+}
+
+static inline int dma_halted(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 1;
+	return (__raw_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
+}
+
+/* Initialize a DMA channel. */
+static inline void init_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	u32 mode;
+
+	if (!chan)
+		return;
+
+	disable_dma(dmanr);
+
+	/* Set device FIFO address */
+	__raw_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR);
+
+	mode = chan->mode | (chan->dev_id << DMA_DID_BIT);
+	if (chan->irq)
+		mode |= DMA_IE;
+
+	__raw_writel(~mode, chan->io + DMA_MODE_CLEAR);
+	__raw_writel(mode,	 chan->io + DMA_MODE_SET);
+}
+
+/*
+ * Set mode for a specific DMA channel
+ */
+static inline void set_dma_mode(unsigned int dmanr, unsigned int mode)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	/*
+	 * set_dma_mode is only allowed to change endianess, direction,
+	 * transfer size, device FIFO width, and coherency settings.
+	 * Make sure anything else is masked off.
+	 */
+	mode &= (DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+	chan->mode &= ~(DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+	chan->mode |= mode;
+}
+
+static inline unsigned int get_dma_mode(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 0;
+	return chan->mode;
+}
+
+static inline int get_dma_active_buffer(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return -1;
+	return (__raw_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
+}
+
+/*
+ * Set the device FIFO address for a specific DMA channel - only
+ * applicable to GPO4 and GPO5. All the other devices have fixed
+ * FIFO addresses.
+ */
+static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+
+	if (chan->mode & DMA_DS)	/* second bank of device IDs */
+		return;
+
+	if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05)
+		return;
+
+	__raw_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR);
+}
+
+/*
+ * Clear the DMA buffer done bits in the mode register.
+ */
+static inline void clear_dma_done0(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	__raw_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
+}
+
+static inline void clear_dma_done1(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	__raw_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
+}
+
+/*
+ * This does nothing - not applicable to Au1000 DMA.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+/*
+ * Set Buffer 0 transfer address for specific DMA channel.
+ */
+static inline void set_dma_addr0(unsigned int dmanr, unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	__raw_writel(a, chan->io + DMA_BUFFER0_START);
+}
+
+/*
+ * Set Buffer 1 transfer address for specific DMA channel.
+ */
+static inline void set_dma_addr1(unsigned int dmanr, unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	__raw_writel(a, chan->io + DMA_BUFFER1_START);
+}
+
+
+/*
+ * Set Buffer 0 transfer size (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count0(unsigned int dmanr, unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	__raw_writel(count, chan->io + DMA_BUFFER0_COUNT);
+}
+
+/*
+ * Set Buffer 1 transfer size (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count1(unsigned int dmanr, unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	__raw_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Set both buffer transfer sizes (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	__raw_writel(count, chan->io + DMA_BUFFER0_COUNT);
+	__raw_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Returns which buffer has its done bit set in the mode register.
+ * Returns -1 if neither or both done bits set.
+ */
+static inline unsigned int get_dma_buffer_done(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 0;
+	return __raw_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
+}
+
+
+/*
+ * Returns the DMA channel's Buffer Done IRQ number.
+ */
+static inline int get_dma_done_irq(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return -1;
+	return chan->irq;
+}
+
+/*
+ * Get DMA residue count. Returns the number of _bytes_ left to transfer.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+	int curBufCntReg, count;
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 0;
+
+	curBufCntReg = (__raw_readl(chan->io + DMA_MODE_READ) & DMA_AB) ?
+	    DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT;
+
+	count = __raw_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK;
+
+	if ((chan->mode & DMA_DW_MASK) == DMA_DW16)
+		count <<= 1;
+	else if ((chan->mode & DMA_DW_MASK) == DMA_DW32)
+		count <<= 2;
+
+	return count;
+}
+
+#endif /* __ASM_AU1000_DMA_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
new file mode 100644
index 000000000..cadab91ce
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
@@ -0,0 +1,210 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Defines for using the MMC/SD controllers on the
+ *      Alchemy Au1100 mips processor.
+ *
+ * Copyright (c) 2003 Embedded Edge, LLC.
+ * Author: Embedded Edge, LLC.
+ *         	dan@embeddededge.com or tim@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+/*
+ * AU1100 MMC/SD definitions.
+ *
+ * From "AMD Alchemy Solutions Au1100 Processor Data Book - Preliminary"
+ *    June, 2003
+ */
+
+#ifndef __ASM_AU1100_MMC_H
+#define __ASM_AU1100_MMC_H
+
+#include <linux/leds.h>
+
+struct au1xmmc_platform_data {
+	int(*cd_setup)(void *mmc_host, int on);
+	int(*card_inserted)(void *mmc_host);
+	int(*card_readonly)(void *mmc_host);
+	void(*set_power)(void *mmc_host, int state);
+	struct led_classdev *led;
+	unsigned long mask_host_caps;
+};
+
+#define SD0_BASE	0xB0600000
+#define SD1_BASE	0xB0680000
+
+
+/*
+ *  Register offsets.
+ */
+#define SD_TXPORT	(0x0000)
+#define SD_RXPORT	(0x0004)
+#define SD_CONFIG	(0x0008)
+#define SD_ENABLE	(0x000C)
+#define SD_CONFIG2	(0x0010)
+#define SD_BLKSIZE	(0x0014)
+#define SD_STATUS	(0x0018)
+#define SD_DEBUG	(0x001C)
+#define SD_CMD		(0x0020)
+#define SD_CMDARG	(0x0024)
+#define SD_RESP3	(0x0028)
+#define SD_RESP2	(0x002C)
+#define SD_RESP1	(0x0030)
+#define SD_RESP0	(0x0034)
+#define SD_TIMEOUT	(0x0038)
+
+
+/*
+ *  SD_TXPORT bit definitions.
+ */
+#define SD_TXPORT_TXD	(0x000000ff)
+
+
+/*
+ *  SD_RXPORT bit definitions.
+ */
+#define SD_RXPORT_RXD	(0x000000ff)
+
+
+/*
+ *  SD_CONFIG bit definitions.
+ */
+#define SD_CONFIG_DIV	(0x000001ff)
+#define SD_CONFIG_DE	(0x00000200)
+#define SD_CONFIG_NE	(0x00000400)
+#define SD_CONFIG_TU	(0x00000800)
+#define SD_CONFIG_TO	(0x00001000)
+#define SD_CONFIG_RU	(0x00002000)
+#define SD_CONFIG_RO	(0x00004000)
+#define SD_CONFIG_I	(0x00008000)
+#define SD_CONFIG_CR	(0x00010000)
+#define SD_CONFIG_RAT	(0x00020000)
+#define SD_CONFIG_DD	(0x00040000)
+#define SD_CONFIG_DT	(0x00080000)
+#define SD_CONFIG_SC	(0x00100000)
+#define SD_CONFIG_RC	(0x00200000)
+#define SD_CONFIG_WC	(0x00400000)
+#define SD_CONFIG_xxx	(0x00800000)
+#define SD_CONFIG_TH	(0x01000000)
+#define SD_CONFIG_TE	(0x02000000)
+#define SD_CONFIG_TA	(0x04000000)
+#define SD_CONFIG_RH	(0x08000000)
+#define SD_CONFIG_RA	(0x10000000)
+#define SD_CONFIG_RF	(0x20000000)
+#define SD_CONFIG_CD	(0x40000000)
+#define SD_CONFIG_SI	(0x80000000)
+
+
+/*
+ *  SD_ENABLE bit definitions.
+ */
+#define SD_ENABLE_CE	(0x00000001)
+#define SD_ENABLE_R	(0x00000002)
+
+
+/*
+ *  SD_CONFIG2 bit definitions.
+ */
+#define SD_CONFIG2_EN	(0x00000001)
+#define SD_CONFIG2_FF	(0x00000002)
+#define SD_CONFIG2_xx1	(0x00000004)
+#define SD_CONFIG2_DF	(0x00000008)
+#define SD_CONFIG2_DC	(0x00000010)
+#define SD_CONFIG2_xx2	(0x000000e0)
+#define SD_CONFIG2_BB	(0x00000080)
+#define SD_CONFIG2_WB	(0x00000100)
+#define SD_CONFIG2_RW	(0x00000200)
+#define SD_CONFIG2_DP	(0x00000400)
+
+
+/*
+ *  SD_BLKSIZE bit definitions.
+ */
+#define SD_BLKSIZE_BS	(0x000007ff)
+#define SD_BLKSIZE_BS_SHIFT	 (0)
+#define SD_BLKSIZE_BC	(0x01ff0000)
+#define SD_BLKSIZE_BC_SHIFT	(16)
+
+
+/*
+ *  SD_STATUS bit definitions.
+ */
+#define SD_STATUS_DCRCW (0x00000007)
+#define SD_STATUS_xx1	(0x00000008)
+#define SD_STATUS_CB	(0x00000010)
+#define SD_STATUS_DB	(0x00000020)
+#define SD_STATUS_CF	(0x00000040)
+#define SD_STATUS_D3	(0x00000080)
+#define SD_STATUS_xx2	(0x00000300)
+#define SD_STATUS_NE	(0x00000400)
+#define SD_STATUS_TU	(0x00000800)
+#define SD_STATUS_TO	(0x00001000)
+#define SD_STATUS_RU	(0x00002000)
+#define SD_STATUS_RO	(0x00004000)
+#define SD_STATUS_I	(0x00008000)
+#define SD_STATUS_CR	(0x00010000)
+#define SD_STATUS_RAT	(0x00020000)
+#define SD_STATUS_DD	(0x00040000)
+#define SD_STATUS_DT	(0x00080000)
+#define SD_STATUS_SC	(0x00100000)
+#define SD_STATUS_RC	(0x00200000)
+#define SD_STATUS_WC	(0x00400000)
+#define SD_STATUS_xx3	(0x00800000)
+#define SD_STATUS_TH	(0x01000000)
+#define SD_STATUS_TE	(0x02000000)
+#define SD_STATUS_TA	(0x04000000)
+#define SD_STATUS_RH	(0x08000000)
+#define SD_STATUS_RA	(0x10000000)
+#define SD_STATUS_RF	(0x20000000)
+#define SD_STATUS_CD	(0x40000000)
+#define SD_STATUS_SI	(0x80000000)
+
+
+/*
+ *  SD_CMD bit definitions.
+ */
+#define SD_CMD_GO	(0x00000001)
+#define SD_CMD_RY	(0x00000002)
+#define SD_CMD_xx1	(0x0000000c)
+#define SD_CMD_CT_MASK	(0x000000f0)
+#define SD_CMD_CT_0	(0x00000000)
+#define SD_CMD_CT_1	(0x00000010)
+#define SD_CMD_CT_2	(0x00000020)
+#define SD_CMD_CT_3	(0x00000030)
+#define SD_CMD_CT_4	(0x00000040)
+#define SD_CMD_CT_5	(0x00000050)
+#define SD_CMD_CT_6	(0x00000060)
+#define SD_CMD_CT_7	(0x00000070)
+#define SD_CMD_CI	(0x0000ff00)
+#define SD_CMD_CI_SHIFT		(8)
+#define SD_CMD_RT_MASK	(0x00ff0000)
+#define SD_CMD_RT_0	(0x00000000)
+#define SD_CMD_RT_1	(0x00010000)
+#define SD_CMD_RT_2	(0x00020000)
+#define SD_CMD_RT_3	(0x00030000)
+#define SD_CMD_RT_4	(0x00040000)
+#define SD_CMD_RT_5	(0x00050000)
+#define SD_CMD_RT_6	(0x00060000)
+#define SD_CMD_RT_1B	(0x00810000)
+
+
+#endif /* __ASM_AU1100_MMC_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1200fb.h b/arch/mips/include/asm/mach-au1x00/au1200fb.h
new file mode 100644
index 000000000..b3c87cc64
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1200fb.h
@@ -0,0 +1,14 @@
+/*
+ * platform data for au1200fb driver.
+ */
+
+#ifndef _AU1200FB_PLAT_H_
+#define _AU1200FB_PLAT_H_
+
+struct au1200fb_platdata {
+	int (*panel_index)(void);
+	int (*panel_init)(void);
+	int (*panel_shutdown)(void);
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1550_spi.h b/arch/mips/include/asm/mach-au1x00/au1550_spi.h
new file mode 100644
index 000000000..08e1958e9
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1550_spi.h
@@ -0,0 +1,15 @@
+/*
+ * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure
+ */
+
+#ifndef _AU1550_SPI_H_
+#define _AU1550_SPI_H_
+
+struct au1550_spi_info {
+	u32 mainclk_hz;		/* main input clock frequency of PSC */
+	u16 num_chipselect;	/* number of chipselects supported */
+	void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
+	void (*deactivate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1550nd.h b/arch/mips/include/asm/mach-au1x00/au1550nd.h
new file mode 100644
index 000000000..ad4c0a03a
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1550nd.h
@@ -0,0 +1,16 @@
+/*
+ * platform data for the Au1550 NAND driver
+ */
+
+#ifndef _AU1550ND_H_
+#define _AU1550ND_H_
+
+#include <linux/mtd/partitions.h>
+
+struct au1550nd_platdata {
+	struct mtd_partition *parts;
+	int num_parts;
+	int devwidth;	/* 0 = 8bit device, 1 = 16bit device */
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
new file mode 100644
index 000000000..ca8077afa
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -0,0 +1,388 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1550 Descriptor
+ *	Based DMA Controller.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ *	dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Specifics for the Au1xxx Descriptor-Based DMA Controller,
+ * first seen in the AU1550 part.
+ */
+#ifndef _AU1000_DBDMA_H_
+#define _AU1000_DBDMA_H_
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+typedef volatile struct dbdma_global {
+	u32	ddma_config;
+	u32	ddma_intstat;
+	u32	ddma_throttle;
+	u32	ddma_inten;
+} dbdma_global_t;
+
+/* General Configuration. */
+#define DDMA_CONFIG_AF		(1 << 2)
+#define DDMA_CONFIG_AH		(1 << 1)
+#define DDMA_CONFIG_AL		(1 << 0)
+
+#define DDMA_THROTTLE_EN	(1 << 31)
+
+/* The structure of a DMA Channel. */
+typedef volatile struct au1xxx_dma_channel {
+	u32	ddma_cfg;	/* See below */
+	u32	ddma_desptr;	/* 32-byte aligned pointer to descriptor */
+	u32	ddma_statptr;	/* word aligned pointer to status word */
+	u32	ddma_dbell;	/* A write activates channel operation */
+	u32	ddma_irq;	/* If bit 0 set, interrupt pending */
+	u32	ddma_stat;	/* See below */
+	u32	ddma_bytecnt;	/* Byte count, valid only when chan idle */
+	/* Remainder, up to the 256 byte boundary, is reserved. */
+} au1x_dma_chan_t;
+
+#define DDMA_CFG_SED	(1 << 9)	/* source DMA level/edge detect */
+#define DDMA_CFG_SP	(1 << 8)	/* source DMA polarity */
+#define DDMA_CFG_DED	(1 << 7)	/* destination DMA level/edge detect */
+#define DDMA_CFG_DP	(1 << 6)	/* destination DMA polarity */
+#define DDMA_CFG_SYNC	(1 << 5)	/* Sync static bus controller */
+#define DDMA_CFG_PPR	(1 << 4)	/* PCI posted read/write control */
+#define DDMA_CFG_DFN	(1 << 3)	/* Descriptor fetch non-coherent */
+#define DDMA_CFG_SBE	(1 << 2)	/* Source big endian */
+#define DDMA_CFG_DBE	(1 << 1)	/* Destination big endian */
+#define DDMA_CFG_EN	(1 << 0)	/* Channel enable */
+
+/*
+ * Always set when descriptor processing done, regardless of
+ * interrupt enable state.  Reflected in global intstat, don't
+ * clear this until global intstat is read/used.
+ */
+#define DDMA_IRQ_IN	(1 << 0)
+
+#define DDMA_STAT_DB	(1 << 2)	/* Doorbell pushed */
+#define DDMA_STAT_V	(1 << 1)	/* Descriptor valid */
+#define DDMA_STAT_H	(1 << 0)	/* Channel Halted */
+
+/*
+ * "Standard" DDMA Descriptor.
+ * Must be 32-byte aligned.
+ */
+typedef volatile struct au1xxx_ddma_desc {
+	u32	dscr_cmd0;		/* See below */
+	u32	dscr_cmd1;		/* See below */
+	u32	dscr_source0;		/* source phys address */
+	u32	dscr_source1;		/* See below */
+	u32	dscr_dest0;		/* Destination address */
+	u32	dscr_dest1;		/* See below */
+	u32	dscr_stat;		/* completion status */
+	u32	dscr_nxtptr;		/* Next descriptor pointer (mostly) */
+	/*
+	 * First 32 bytes are HW specific!!!
+	 * Lets have some SW data following -- make sure it's 32 bytes.
+	 */
+	u32	sw_status;
+	u32	sw_context;
+	u32	sw_reserved[6];
+} au1x_ddma_desc_t;
+
+#define DSCR_CMD0_V		(1 << 31)	/* Descriptor valid */
+#define DSCR_CMD0_MEM		(1 << 30)	/* mem-mem transfer */
+#define DSCR_CMD0_SID_MASK	(0x1f << 25)	/* Source ID */
+#define DSCR_CMD0_DID_MASK	(0x1f << 20)	/* Destination ID */
+#define DSCR_CMD0_SW_MASK	(0x3 << 18)	/* Source Width */
+#define DSCR_CMD0_DW_MASK	(0x3 << 16)	/* Destination Width */
+#define DSCR_CMD0_ARB		(0x1 << 15)	/* Set for Hi Pri */
+#define DSCR_CMD0_DT_MASK	(0x3 << 13)	/* Descriptor Type */
+#define DSCR_CMD0_SN		(0x1 << 12)	/* Source non-coherent */
+#define DSCR_CMD0_DN		(0x1 << 11)	/* Destination non-coherent */
+#define DSCR_CMD0_SM		(0x1 << 10)	/* Stride mode */
+#define DSCR_CMD0_IE		(0x1 << 8)	/* Interrupt Enable */
+#define DSCR_CMD0_SP		(0x1 << 4)	/* Status pointer select */
+#define DSCR_CMD0_CV		(0x1 << 2)	/* Clear Valid when done */
+#define DSCR_CMD0_ST_MASK	(0x3 << 0)	/* Status instruction */
+
+#define SW_STATUS_INUSE		(1 << 0)
+
+/* Command 0 device IDs. */
+#define AU1550_DSCR_CMD0_UART0_TX	0
+#define AU1550_DSCR_CMD0_UART0_RX	1
+#define AU1550_DSCR_CMD0_UART3_TX	2
+#define AU1550_DSCR_CMD0_UART3_RX	3
+#define AU1550_DSCR_CMD0_DMA_REQ0	4
+#define AU1550_DSCR_CMD0_DMA_REQ1	5
+#define AU1550_DSCR_CMD0_DMA_REQ2	6
+#define AU1550_DSCR_CMD0_DMA_REQ3	7
+#define AU1550_DSCR_CMD0_USBDEV_RX0	8
+#define AU1550_DSCR_CMD0_USBDEV_TX0	9
+#define AU1550_DSCR_CMD0_USBDEV_TX1	10
+#define AU1550_DSCR_CMD0_USBDEV_TX2	11
+#define AU1550_DSCR_CMD0_USBDEV_RX3	12
+#define AU1550_DSCR_CMD0_USBDEV_RX4	13
+#define AU1550_DSCR_CMD0_PSC0_TX	14
+#define AU1550_DSCR_CMD0_PSC0_RX	15
+#define AU1550_DSCR_CMD0_PSC1_TX	16
+#define AU1550_DSCR_CMD0_PSC1_RX	17
+#define AU1550_DSCR_CMD0_PSC2_TX	18
+#define AU1550_DSCR_CMD0_PSC2_RX	19
+#define AU1550_DSCR_CMD0_PSC3_TX	20
+#define AU1550_DSCR_CMD0_PSC3_RX	21
+#define AU1550_DSCR_CMD0_PCI_WRITE	22
+#define AU1550_DSCR_CMD0_NAND_FLASH	23
+#define AU1550_DSCR_CMD0_MAC0_RX	24
+#define AU1550_DSCR_CMD0_MAC0_TX	25
+#define AU1550_DSCR_CMD0_MAC1_RX	26
+#define AU1550_DSCR_CMD0_MAC1_TX	27
+
+#define AU1200_DSCR_CMD0_UART0_TX	0
+#define AU1200_DSCR_CMD0_UART0_RX	1
+#define AU1200_DSCR_CMD0_UART1_TX	2
+#define AU1200_DSCR_CMD0_UART1_RX	3
+#define AU1200_DSCR_CMD0_DMA_REQ0	4
+#define AU1200_DSCR_CMD0_DMA_REQ1	5
+#define AU1200_DSCR_CMD0_MAE_BE		6
+#define AU1200_DSCR_CMD0_MAE_FE		7
+#define AU1200_DSCR_CMD0_SDMS_TX0	8
+#define AU1200_DSCR_CMD0_SDMS_RX0	9
+#define AU1200_DSCR_CMD0_SDMS_TX1	10
+#define AU1200_DSCR_CMD0_SDMS_RX1	11
+#define AU1200_DSCR_CMD0_AES_TX		13
+#define AU1200_DSCR_CMD0_AES_RX		12
+#define AU1200_DSCR_CMD0_PSC0_TX	14
+#define AU1200_DSCR_CMD0_PSC0_RX	15
+#define AU1200_DSCR_CMD0_PSC1_TX	16
+#define AU1200_DSCR_CMD0_PSC1_RX	17
+#define AU1200_DSCR_CMD0_CIM_RXA	18
+#define AU1200_DSCR_CMD0_CIM_RXB	19
+#define AU1200_DSCR_CMD0_CIM_RXC	20
+#define AU1200_DSCR_CMD0_MAE_BOTH	21
+#define AU1200_DSCR_CMD0_LCD		22
+#define AU1200_DSCR_CMD0_NAND_FLASH	23
+#define AU1200_DSCR_CMD0_PSC0_SYNC	24
+#define AU1200_DSCR_CMD0_PSC1_SYNC	25
+#define AU1200_DSCR_CMD0_CIM_SYNC	26
+
+#define AU1300_DSCR_CMD0_UART0_TX      0
+#define AU1300_DSCR_CMD0_UART0_RX      1
+#define AU1300_DSCR_CMD0_UART1_TX      2
+#define AU1300_DSCR_CMD0_UART1_RX      3
+#define AU1300_DSCR_CMD0_UART2_TX      4
+#define AU1300_DSCR_CMD0_UART2_RX      5
+#define AU1300_DSCR_CMD0_UART3_TX      6
+#define AU1300_DSCR_CMD0_UART3_RX      7
+#define AU1300_DSCR_CMD0_SDMS_TX0      8
+#define AU1300_DSCR_CMD0_SDMS_RX0      9
+#define AU1300_DSCR_CMD0_SDMS_TX1      10
+#define AU1300_DSCR_CMD0_SDMS_RX1      11
+#define AU1300_DSCR_CMD0_AES_TX	       12
+#define AU1300_DSCR_CMD0_AES_RX	       13
+#define AU1300_DSCR_CMD0_PSC0_TX       14
+#define AU1300_DSCR_CMD0_PSC0_RX       15
+#define AU1300_DSCR_CMD0_PSC1_TX       16
+#define AU1300_DSCR_CMD0_PSC1_RX       17
+#define AU1300_DSCR_CMD0_PSC2_TX       18
+#define AU1300_DSCR_CMD0_PSC2_RX       19
+#define AU1300_DSCR_CMD0_PSC3_TX       20
+#define AU1300_DSCR_CMD0_PSC3_RX       21
+#define AU1300_DSCR_CMD0_LCD	       22
+#define AU1300_DSCR_CMD0_NAND_FLASH    23
+#define AU1300_DSCR_CMD0_SDMS_TX2      24
+#define AU1300_DSCR_CMD0_SDMS_RX2      25
+#define AU1300_DSCR_CMD0_CIM_SYNC      26
+#define AU1300_DSCR_CMD0_UDMA	       27
+#define AU1300_DSCR_CMD0_DMA_REQ0      28
+#define AU1300_DSCR_CMD0_DMA_REQ1      29
+
+#define DSCR_CMD0_THROTTLE	30
+#define DSCR_CMD0_ALWAYS	31
+#define DSCR_NDEV_IDS		32
+/* This macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \
+				  ((d) & 0xFF))
+#define DSCR_CUSTOM2DEV_ID(x)	((x) & 0xFF)
+
+#define DSCR_CMD0_SID(x)	(((x) & 0x1f) << 25)
+#define DSCR_CMD0_DID(x)	(((x) & 0x1f) << 20)
+
+/* Source/Destination transfer width. */
+#define DSCR_CMD0_BYTE		0
+#define DSCR_CMD0_HALFWORD	1
+#define DSCR_CMD0_WORD		2
+
+#define DSCR_CMD0_SW(x)		(((x) & 0x3) << 18)
+#define DSCR_CMD0_DW(x)		(((x) & 0x3) << 16)
+
+/* DDMA Descriptor Type. */
+#define DSCR_CMD0_STANDARD	0
+#define DSCR_CMD0_LITERAL	1
+#define DSCR_CMD0_CMP_BRANCH	2
+
+#define DSCR_CMD0_DT(x)		(((x) & 0x3) << 13)
+
+/* Status Instruction. */
+#define DSCR_CMD0_ST_NOCHANGE	0	/* Don't change */
+#define DSCR_CMD0_ST_CURRENT	1	/* Write current status */
+#define DSCR_CMD0_ST_CMD0	2	/* Write cmd0 with V cleared */
+#define DSCR_CMD0_ST_BYTECNT	3	/* Write remaining byte count */
+
+#define DSCR_CMD0_ST(x)		(((x) & 0x3) << 0)
+
+/* Descriptor Command 1. */
+#define DSCR_CMD1_SUPTR_MASK	(0xf << 28)	/* upper 4 bits of src addr */
+#define DSCR_CMD1_DUPTR_MASK	(0xf << 24)	/* upper 4 bits of dest addr */
+#define DSCR_CMD1_FL_MASK	(0x3 << 22)	/* Flag bits */
+#define DSCR_CMD1_BC_MASK	(0x3fffff)	/* Byte count */
+
+/* Flag description. */
+#define DSCR_CMD1_FL_MEM_STRIDE0	0
+#define DSCR_CMD1_FL_MEM_STRIDE1	1
+#define DSCR_CMD1_FL_MEM_STRIDE2	2
+
+#define DSCR_CMD1_FL(x)		(((x) & 0x3) << 22)
+
+/* Source1, 1-dimensional stride. */
+#define DSCR_SRC1_STS_MASK	(3 << 30)	/* Src xfer size */
+#define DSCR_SRC1_SAM_MASK	(3 << 28)	/* Src xfer movement */
+#define DSCR_SRC1_SB_MASK	(0x3fff << 14)	/* Block size */
+#define DSCR_SRC1_SB(x)		(((x) & 0x3fff) << 14)
+#define DSCR_SRC1_SS_MASK	(0x3fff << 0)	/* Stride */
+#define DSCR_SRC1_SS(x)		(((x) & 0x3fff) << 0)
+
+/* Dest1, 1-dimensional stride. */
+#define DSCR_DEST1_DTS_MASK	(3 << 30)	/* Dest xfer size */
+#define DSCR_DEST1_DAM_MASK	(3 << 28)	/* Dest xfer movement */
+#define DSCR_DEST1_DB_MASK	(0x3fff << 14)	/* Block size */
+#define DSCR_DEST1_DB(x)	(((x) & 0x3fff) << 14)
+#define DSCR_DEST1_DS_MASK	(0x3fff << 0)	/* Stride */
+#define DSCR_DEST1_DS(x)	(((x) & 0x3fff) << 0)
+
+#define DSCR_xTS_SIZE1		0
+#define DSCR_xTS_SIZE2		1
+#define DSCR_xTS_SIZE4		2
+#define DSCR_xTS_SIZE8		3
+#define DSCR_SRC1_STS(x)	(((x) & 3) << 30)
+#define DSCR_DEST1_DTS(x)	(((x) & 3) << 30)
+
+#define DSCR_xAM_INCREMENT	0
+#define DSCR_xAM_DECREMENT	1
+#define DSCR_xAM_STATIC		2
+#define DSCR_xAM_BURST		3
+#define DSCR_SRC1_SAM(x)	(((x) & 3) << 28)
+#define DSCR_DEST1_DAM(x)	(((x) & 3) << 28)
+
+/* The next descriptor pointer. */
+#define DSCR_NXTPTR_MASK	(0x07ffffff)
+#define DSCR_NXTPTR(x)		((x) >> 5)
+#define DSCR_GET_NXTPTR(x)	((x) << 5)
+#define DSCR_NXTPTR_MS		(1 << 27)
+
+/* The number of DBDMA channels. */
+#define NUM_DBDMA_CHANS 16
+
+/*
+ * DDMA API definitions
+ * FIXME: may not fit to this header file
+ */
+typedef struct dbdma_device_table {
+	u32	dev_id;
+	u32	dev_flags;
+	u32	dev_tsize;
+	u32	dev_devwidth;
+	u32	dev_physaddr;		/* If FIFO */
+	u32	dev_intlevel;
+	u32	dev_intpolarity;
+} dbdev_tab_t;
+
+
+typedef struct dbdma_chan_config {
+	spinlock_t	lock;
+
+	u32			chan_flags;
+	u32			chan_index;
+	dbdev_tab_t		*chan_src;
+	dbdev_tab_t		*chan_dest;
+	au1x_dma_chan_t		*chan_ptr;
+	au1x_ddma_desc_t	*chan_desc_base;
+	u32			cdb_membase; /* kmalloc base of above */
+	au1x_ddma_desc_t	*get_ptr, *put_ptr, *cur_ptr;
+	void			*chan_callparam;
+	void			(*chan_callback)(int, void *);
+} chan_tab_t;
+
+#define DEV_FLAGS_INUSE		(1 << 0)
+#define DEV_FLAGS_ANYUSE	(1 << 1)
+#define DEV_FLAGS_OUT		(1 << 2)
+#define DEV_FLAGS_IN		(1 << 3)
+#define DEV_FLAGS_BURSTABLE	(1 << 4)
+#define DEV_FLAGS_SYNC		(1 << 5)
+/* end DDMA API definitions */
+
+/*
+ * External functions for drivers to use.
+ * Use this to allocate a DBDMA channel.  The device IDs are one of
+ * the DSCR_CMD0 devices IDs, which is usually redefined to a more
+ * meaningful name.  The 'callback' is called during DMA completion
+ * interrupt.
+ */
+extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+				   void (*callback)(int, void *),
+				   void *callparam);
+
+#define DBDMA_MEM_CHAN	DSCR_CMD0_ALWAYS
+
+/* Set the device width of an in/out FIFO. */
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
+
+/* Allocate a ring of descriptors for DBDMA. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
+
+/* Put buffers on source/destination descriptors. */
+u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
+u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
+
+/* Get a buffer from the destination descriptor. */
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
+
+void au1xxx_dbdma_stop(u32 chanid);
+void au1xxx_dbdma_start(u32 chanid);
+void au1xxx_dbdma_reset(u32 chanid);
+u32 au1xxx_get_dma_residue(u32 chanid);
+
+void au1xxx_dbdma_chan_free(u32 chanid);
+void au1xxx_dbdma_dump(u32 chanid);
+
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
+
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+extern void au1xxx_ddma_del_device(u32 devid);
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+
+/*
+ *	Flags for the put_source/put_dest functions.
+ */
+#define DDMA_FLAGS_IE	(1 << 0)
+#define DDMA_FLAGS_NOIE (1 << 1)
+
+#endif /* _LANGUAGE_ASSEMBLY */
+#endif /* _AU1000_DBDMA_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
new file mode 100644
index 000000000..49dc8d9db
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
@@ -0,0 +1,18 @@
+#ifndef __AU1X00_ETH_DATA_H
+#define __AU1X00_ETH_DATA_H
+
+/* Platform specific PHY configuration passed to the MAC driver */
+struct au1000_eth_platform_data {
+	int phy_static_config;
+	int phy_search_highest_addr;
+	int phy1_search_mac0;
+	int phy_addr;
+	int phy_busid;
+	int phy_irq;
+	char mac[6];
+};
+
+void __init au1xxx_override_eth_cfg(unsigned port,
+			struct au1000_eth_platform_data *eth_data);
+
+#endif /* __AU1X00_ETH_DATA_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
new file mode 100644
index 000000000..bb91b8923
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -0,0 +1,178 @@
+/*
+ * include/asm-mips/mach-au1x00/au1xxx_ide.h  version 01.30.00  Aug. 02 2005
+ *
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ *	 Interface and Linux Device Driver" Application Note.
+ */
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+#define DMA_WAIT_TIMEOUT	100
+#define NUM_DESCRIPTORS		PRD_ENTRIES
+#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
+#define NUM_DESCRIPTORS		2
+#endif
+
+#ifndef AU1XXX_ATA_RQSIZE
+#define AU1XXX_ATA_RQSIZE	128
+#endif
+
+/* Disable Burstable-Support for DBDMA */
+#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON	0
+#endif
+
+typedef struct {
+	u32			tx_dev_id, rx_dev_id, target_dev_id;
+	u32			tx_chan, rx_chan;
+	void			*tx_desc_head, *rx_desc_head;
+	ide_hwif_t		*hwif;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+	ide_drive_t		*drive;
+	struct dbdma_cmd	*dma_table_cpu;
+	dma_addr_t		dma_table_dma;
+#endif
+	int			irq;
+	u32			regbase;
+	int			ddma_id;
+} _auide_hwif;
+
+/******************************************************************************/
+/* PIO Mode timing calculation :					      */
+/*									      */
+/* Static Bus Spec   ATA Spec						      */
+/*	Tcsoe	   =	t1						      */
+/*	Toecs	   =	t9						      */
+/*	Twcs	   =	t9						      */
+/*	Tcsh	   =	t2i | t2					      */
+/*	Tcsoff	   =	t2i | t2					      */
+/*	Twp	   =	t2						      */
+/*	Tcsw	   =	t1						      */
+/*	Tpm	   =	0						      */
+/*	Ta	   =	t1+t2						      */
+/******************************************************************************/
+
+#define TCSOE_MASK		(0x07 << 29)
+#define TOECS_MASK		(0x07 << 26)
+#define TWCS_MASK		(0x07 << 28)
+#define TCSH_MASK		(0x0F << 24)
+#define TCSOFF_MASK		(0x07 << 20)
+#define TWP_MASK		(0x3F << 14)
+#define TCSW_MASK		(0x0F << 10)
+#define TPM_MASK		(0x0F << 6)
+#define TA_MASK			(0x3F << 0)
+#define TS_MASK			(1 << 8)
+
+/* Timing parameters PIO mode 0 */
+#define SBC_IDE_PIO0_TCSOE	(0x04 << 29)
+#define SBC_IDE_PIO0_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO0_TWCS	(0x02 << 28)
+#define SBC_IDE_PIO0_TCSH	(0x08 << 24)
+#define SBC_IDE_PIO0_TCSOFF	(0x07 << 20)
+#define SBC_IDE_PIO0_TWP	(0x10 << 14)
+#define SBC_IDE_PIO0_TCSW	(0x04 << 10)
+#define SBC_IDE_PIO0_TPM	(0x00 << 6)
+#define SBC_IDE_PIO0_TA		(0x15 << 0)
+/* Timing parameters PIO mode 1 */
+#define SBC_IDE_PIO1_TCSOE	(0x03 << 29)
+#define SBC_IDE_PIO1_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO1_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO1_TCSH	(0x06 << 24)
+#define SBC_IDE_PIO1_TCSOFF	(0x06 << 20)
+#define SBC_IDE_PIO1_TWP	(0x08 << 14)
+#define SBC_IDE_PIO1_TCSW	(0x03 << 10)
+#define SBC_IDE_PIO1_TPM	(0x00 << 6)
+#define SBC_IDE_PIO1_TA		(0x0B << 0)
+/* Timing parameters PIO mode 2 */
+#define SBC_IDE_PIO2_TCSOE	(0x05 << 29)
+#define SBC_IDE_PIO2_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO2_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO2_TCSH	(0x07 << 24)
+#define SBC_IDE_PIO2_TCSOFF	(0x07 << 20)
+#define SBC_IDE_PIO2_TWP	(0x1F << 14)
+#define SBC_IDE_PIO2_TCSW	(0x05 << 10)
+#define SBC_IDE_PIO2_TPM	(0x00 << 6)
+#define SBC_IDE_PIO2_TA		(0x22 << 0)
+/* Timing parameters PIO mode 3 */
+#define SBC_IDE_PIO3_TCSOE	(0x05 << 29)
+#define SBC_IDE_PIO3_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO3_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO3_TCSH	(0x0D << 24)
+#define SBC_IDE_PIO3_TCSOFF	(0x0D << 20)
+#define SBC_IDE_PIO3_TWP	(0x15 << 14)
+#define SBC_IDE_PIO3_TCSW	(0x05 << 10)
+#define SBC_IDE_PIO3_TPM	(0x00 << 6)
+#define SBC_IDE_PIO3_TA		(0x1A << 0)
+/* Timing parameters PIO mode 4 */
+#define SBC_IDE_PIO4_TCSOE	(0x04 << 29)
+#define SBC_IDE_PIO4_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO4_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO4_TCSH	(0x04 << 24)
+#define SBC_IDE_PIO4_TCSOFF	(0x04 << 20)
+#define SBC_IDE_PIO4_TWP	(0x0D << 14)
+#define SBC_IDE_PIO4_TCSW	(0x03 << 10)
+#define SBC_IDE_PIO4_TPM	(0x00 << 6)
+#define SBC_IDE_PIO4_TA		(0x12 << 0)
+/* Timing parameters MDMA mode 0 */
+#define SBC_IDE_MDMA0_TCSOE	(0x03 << 29)
+#define SBC_IDE_MDMA0_TOECS	(0x01 << 26)
+#define SBC_IDE_MDMA0_TWCS	(0x01 << 28)
+#define SBC_IDE_MDMA0_TCSH	(0x07 << 24)
+#define SBC_IDE_MDMA0_TCSOFF	(0x07 << 20)
+#define SBC_IDE_MDMA0_TWP	(0x0C << 14)
+#define SBC_IDE_MDMA0_TCSW	(0x03 << 10)
+#define SBC_IDE_MDMA0_TPM	(0x00 << 6)
+#define SBC_IDE_MDMA0_TA	(0x0F << 0)
+/* Timing parameters MDMA mode 1 */
+#define SBC_IDE_MDMA1_TCSOE	(0x05 << 29)
+#define SBC_IDE_MDMA1_TOECS	(0x01 << 26)
+#define SBC_IDE_MDMA1_TWCS	(0x01 << 28)
+#define SBC_IDE_MDMA1_TCSH	(0x05 << 24)
+#define SBC_IDE_MDMA1_TCSOFF	(0x05 << 20)
+#define SBC_IDE_MDMA1_TWP	(0x0F << 14)
+#define SBC_IDE_MDMA1_TCSW	(0x05 << 10)
+#define SBC_IDE_MDMA1_TPM	(0x00 << 6)
+#define SBC_IDE_MDMA1_TA	(0x15 << 0)
+/* Timing parameters MDMA mode 2 */
+#define SBC_IDE_MDMA2_TCSOE	(0x04 << 29)
+#define SBC_IDE_MDMA2_TOECS	(0x01 << 26)
+#define SBC_IDE_MDMA2_TWCS	(0x01 << 28)
+#define SBC_IDE_MDMA2_TCSH	(0x04 << 24)
+#define SBC_IDE_MDMA2_TCSOFF	(0x04 << 20)
+#define SBC_IDE_MDMA2_TWP	(0x0D << 14)
+#define SBC_IDE_MDMA2_TCSW	(0x04 << 10)
+#define SBC_IDE_MDMA2_TPM	(0x00 << 6)
+#define SBC_IDE_MDMA2_TA	(0x12 << 0)
+
+#define SBC_IDE_TIMING(mode) \
+	(SBC_IDE_##mode##_TWCS | \
+	 SBC_IDE_##mode##_TCSH | \
+	 SBC_IDE_##mode##_TCSOFF | \
+	 SBC_IDE_##mode##_TWP | \
+	 SBC_IDE_##mode##_TCSW | \
+	 SBC_IDE_##mode##_TPM | \
+	 SBC_IDE_##mode##_TA)
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
new file mode 100644
index 000000000..8a9cd754b
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
@@ -0,0 +1,466 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ *	dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Specifics for the Au1xxx Programmable Serial Controllers, first
+ * seen in the AU1550 part.
+ */
+#ifndef _AU1000_PSC_H_
+#define _AU1000_PSC_H_
+
+/*
+ * The PSC select and control registers are common to all protocols.
+ */
+#define PSC_SEL_OFFSET		0x00000000
+#define PSC_CTRL_OFFSET		0x00000004
+
+#define PSC_SEL_CLK_MASK	(3 << 4)
+#define PSC_SEL_CLK_INTCLK	(0 << 4)
+#define PSC_SEL_CLK_EXTCLK	(1 << 4)
+#define PSC_SEL_CLK_SERCLK	(2 << 4)
+
+#define PSC_SEL_PS_MASK		0x00000007
+#define PSC_SEL_PS_DISABLED	0
+#define PSC_SEL_PS_SPIMODE	2
+#define PSC_SEL_PS_I2SMODE	3
+#define PSC_SEL_PS_AC97MODE	4
+#define PSC_SEL_PS_SMBUSMODE	5
+
+#define PSC_CTRL_DISABLE	0
+#define PSC_CTRL_SUSPEND	2
+#define PSC_CTRL_ENABLE		3
+
+/* AC97 Registers. */
+#define PSC_AC97CFG_OFFSET	0x00000008
+#define PSC_AC97MSK_OFFSET	0x0000000c
+#define PSC_AC97PCR_OFFSET	0x00000010
+#define PSC_AC97STAT_OFFSET	0x00000014
+#define PSC_AC97EVNT_OFFSET	0x00000018
+#define PSC_AC97TXRX_OFFSET	0x0000001c
+#define PSC_AC97CDC_OFFSET	0x00000020
+#define PSC_AC97RST_OFFSET	0x00000024
+#define PSC_AC97GPO_OFFSET	0x00000028
+#define PSC_AC97GPI_OFFSET	0x0000002c
+
+/* AC97 Config Register. */
+#define PSC_AC97CFG_RT_MASK	(3 << 30)
+#define PSC_AC97CFG_RT_FIFO1	(0 << 30)
+#define PSC_AC97CFG_RT_FIFO2	(1 << 30)
+#define PSC_AC97CFG_RT_FIFO4	(2 << 30)
+#define PSC_AC97CFG_RT_FIFO8	(3 << 30)
+
+#define PSC_AC97CFG_TT_MASK	(3 << 28)
+#define PSC_AC97CFG_TT_FIFO1	(0 << 28)
+#define PSC_AC97CFG_TT_FIFO2	(1 << 28)
+#define PSC_AC97CFG_TT_FIFO4	(2 << 28)
+#define PSC_AC97CFG_TT_FIFO8	(3 << 28)
+
+#define PSC_AC97CFG_DD_DISABLE	(1 << 27)
+#define PSC_AC97CFG_DE_ENABLE	(1 << 26)
+#define PSC_AC97CFG_SE_ENABLE	(1 << 25)
+
+#define PSC_AC97CFG_LEN_MASK	(0xf << 21)
+#define PSC_AC97CFG_TXSLOT_MASK (0x3ff << 11)
+#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1)
+#define PSC_AC97CFG_GE_ENABLE	(1)
+
+/* Enable slots 3-12. */
+#define PSC_AC97CFG_TXSLOT_ENA(x)	(1 << (((x) - 3) + 11))
+#define PSC_AC97CFG_RXSLOT_ENA(x)	(1 << (((x) - 3) + 1))
+
+/*
+ * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
+ * The only sensible numbers are 7, 9, or possibly 11.	Nah, just do the
+ * arithmetic in the macro.
+ */
+#define PSC_AC97CFG_SET_LEN(x)	(((((x) - 2) / 2) & 0xf) << 21)
+#define PSC_AC97CFG_GET_LEN(x)	(((((x) >> 21) & 0xf) * 2) + 2)
+
+/* AC97 Mask Register. */
+#define PSC_AC97MSK_GR		(1 << 25)
+#define PSC_AC97MSK_CD		(1 << 24)
+#define PSC_AC97MSK_RR		(1 << 13)
+#define PSC_AC97MSK_RO		(1 << 12)
+#define PSC_AC97MSK_RU		(1 << 11)
+#define PSC_AC97MSK_TR		(1 << 10)
+#define PSC_AC97MSK_TO		(1 << 9)
+#define PSC_AC97MSK_TU		(1 << 8)
+#define PSC_AC97MSK_RD		(1 << 5)
+#define PSC_AC97MSK_TD		(1 << 4)
+#define PSC_AC97MSK_ALLMASK	(PSC_AC97MSK_GR | PSC_AC97MSK_CD | \
+				 PSC_AC97MSK_RR | PSC_AC97MSK_RO | \
+				 PSC_AC97MSK_RU | PSC_AC97MSK_TR | \
+				 PSC_AC97MSK_TO | PSC_AC97MSK_TU | \
+				 PSC_AC97MSK_RD | PSC_AC97MSK_TD)
+
+/* AC97 Protocol Control Register. */
+#define PSC_AC97PCR_RC		(1 << 6)
+#define PSC_AC97PCR_RP		(1 << 5)
+#define PSC_AC97PCR_RS		(1 << 4)
+#define PSC_AC97PCR_TC		(1 << 2)
+#define PSC_AC97PCR_TP		(1 << 1)
+#define PSC_AC97PCR_TS		(1 << 0)
+
+/* AC97 Status register (read only). */
+#define PSC_AC97STAT_CB		(1 << 26)
+#define PSC_AC97STAT_CP		(1 << 25)
+#define PSC_AC97STAT_CR		(1 << 24)
+#define PSC_AC97STAT_RF		(1 << 13)
+#define PSC_AC97STAT_RE		(1 << 12)
+#define PSC_AC97STAT_RR		(1 << 11)
+#define PSC_AC97STAT_TF		(1 << 10)
+#define PSC_AC97STAT_TE		(1 << 9)
+#define PSC_AC97STAT_TR		(1 << 8)
+#define PSC_AC97STAT_RB		(1 << 5)
+#define PSC_AC97STAT_TB		(1 << 4)
+#define PSC_AC97STAT_DI		(1 << 2)
+#define PSC_AC97STAT_DR		(1 << 1)
+#define PSC_AC97STAT_SR		(1 << 0)
+
+/* AC97 Event Register. */
+#define PSC_AC97EVNT_GR		(1 << 25)
+#define PSC_AC97EVNT_CD		(1 << 24)
+#define PSC_AC97EVNT_RR		(1 << 13)
+#define PSC_AC97EVNT_RO		(1 << 12)
+#define PSC_AC97EVNT_RU		(1 << 11)
+#define PSC_AC97EVNT_TR		(1 << 10)
+#define PSC_AC97EVNT_TO		(1 << 9)
+#define PSC_AC97EVNT_TU		(1 << 8)
+#define PSC_AC97EVNT_RD		(1 << 5)
+#define PSC_AC97EVNT_TD		(1 << 4)
+
+/* CODEC Command Register. */
+#define PSC_AC97CDC_RD		(1 << 25)
+#define PSC_AC97CDC_ID_MASK	(3 << 23)
+#define PSC_AC97CDC_INDX_MASK	(0x7f << 16)
+#define PSC_AC97CDC_ID(x)	(((x) & 0x03) << 23)
+#define PSC_AC97CDC_INDX(x)	(((x) & 0x7f) << 16)
+
+/* AC97 Reset Control Register. */
+#define PSC_AC97RST_RST		(1 << 1)
+#define PSC_AC97RST_SNC		(1 << 0)
+
+/* PSC in I2S Mode. */
+typedef struct	psc_i2s {
+	u32	psc_sel;
+	u32	psc_ctrl;
+	u32	psc_i2scfg;
+	u32	psc_i2smsk;
+	u32	psc_i2spcr;
+	u32	psc_i2sstat;
+	u32	psc_i2sevent;
+	u32	psc_i2stxrx;
+	u32	psc_i2sudf;
+} psc_i2s_t;
+
+#define PSC_I2SCFG_OFFSET	0x08
+#define PSC_I2SMASK_OFFSET	0x0C
+#define PSC_I2SPCR_OFFSET	0x10
+#define PSC_I2SSTAT_OFFSET	0x14
+#define PSC_I2SEVENT_OFFSET	0x18
+#define PSC_I2SRXTX_OFFSET	0x1C
+#define PSC_I2SUDF_OFFSET	0x20
+
+/* I2S Config Register. */
+#define PSC_I2SCFG_RT_MASK	(3 << 30)
+#define PSC_I2SCFG_RT_FIFO1	(0 << 30)
+#define PSC_I2SCFG_RT_FIFO2	(1 << 30)
+#define PSC_I2SCFG_RT_FIFO4	(2 << 30)
+#define PSC_I2SCFG_RT_FIFO8	(3 << 30)
+
+#define PSC_I2SCFG_TT_MASK	(3 << 28)
+#define PSC_I2SCFG_TT_FIFO1	(0 << 28)
+#define PSC_I2SCFG_TT_FIFO2	(1 << 28)
+#define PSC_I2SCFG_TT_FIFO4	(2 << 28)
+#define PSC_I2SCFG_TT_FIFO8	(3 << 28)
+
+#define PSC_I2SCFG_DD_DISABLE	(1 << 27)
+#define PSC_I2SCFG_DE_ENABLE	(1 << 26)
+#define PSC_I2SCFG_SET_WS(x)	(((((x) / 2) - 1) & 0x7f) << 16)
+#define PSC_I2SCFG_WS(n)	((n & 0xFF) << 16)
+#define PSC_I2SCFG_WS_MASK	(PSC_I2SCFG_WS(0x3F))
+#define PSC_I2SCFG_WI		(1 << 15)
+
+#define PSC_I2SCFG_DIV_MASK	(3 << 13)
+#define PSC_I2SCFG_DIV2		(0 << 13)
+#define PSC_I2SCFG_DIV4		(1 << 13)
+#define PSC_I2SCFG_DIV8		(2 << 13)
+#define PSC_I2SCFG_DIV16	(3 << 13)
+
+#define PSC_I2SCFG_BI		(1 << 12)
+#define PSC_I2SCFG_BUF		(1 << 11)
+#define PSC_I2SCFG_MLJ		(1 << 10)
+#define PSC_I2SCFG_XM		(1 << 9)
+
+/* The word length equation is simply LEN+1. */
+#define PSC_I2SCFG_SET_LEN(x)	((((x) - 1) & 0x1f) << 4)
+#define PSC_I2SCFG_GET_LEN(x)	((((x) >> 4) & 0x1f) + 1)
+
+#define PSC_I2SCFG_LB		(1 << 2)
+#define PSC_I2SCFG_MLF		(1 << 1)
+#define PSC_I2SCFG_MS		(1 << 0)
+
+/* I2S Mask Register. */
+#define PSC_I2SMSK_RR		(1 << 13)
+#define PSC_I2SMSK_RO		(1 << 12)
+#define PSC_I2SMSK_RU		(1 << 11)
+#define PSC_I2SMSK_TR		(1 << 10)
+#define PSC_I2SMSK_TO		(1 << 9)
+#define PSC_I2SMSK_TU		(1 << 8)
+#define PSC_I2SMSK_RD		(1 << 5)
+#define PSC_I2SMSK_TD		(1 << 4)
+#define PSC_I2SMSK_ALLMASK	(PSC_I2SMSK_RR | PSC_I2SMSK_RO | \
+				 PSC_I2SMSK_RU | PSC_I2SMSK_TR | \
+				 PSC_I2SMSK_TO | PSC_I2SMSK_TU | \
+				 PSC_I2SMSK_RD | PSC_I2SMSK_TD)
+
+/* I2S Protocol Control Register. */
+#define PSC_I2SPCR_RC		(1 << 6)
+#define PSC_I2SPCR_RP		(1 << 5)
+#define PSC_I2SPCR_RS		(1 << 4)
+#define PSC_I2SPCR_TC		(1 << 2)
+#define PSC_I2SPCR_TP		(1 << 1)
+#define PSC_I2SPCR_TS		(1 << 0)
+
+/* I2S Status register (read only). */
+#define PSC_I2SSTAT_RF		(1 << 13)
+#define PSC_I2SSTAT_RE		(1 << 12)
+#define PSC_I2SSTAT_RR		(1 << 11)
+#define PSC_I2SSTAT_TF		(1 << 10)
+#define PSC_I2SSTAT_TE		(1 << 9)
+#define PSC_I2SSTAT_TR		(1 << 8)
+#define PSC_I2SSTAT_RB		(1 << 5)
+#define PSC_I2SSTAT_TB		(1 << 4)
+#define PSC_I2SSTAT_DI		(1 << 2)
+#define PSC_I2SSTAT_DR		(1 << 1)
+#define PSC_I2SSTAT_SR		(1 << 0)
+
+/* I2S Event Register. */
+#define PSC_I2SEVNT_RR		(1 << 13)
+#define PSC_I2SEVNT_RO		(1 << 12)
+#define PSC_I2SEVNT_RU		(1 << 11)
+#define PSC_I2SEVNT_TR		(1 << 10)
+#define PSC_I2SEVNT_TO		(1 << 9)
+#define PSC_I2SEVNT_TU		(1 << 8)
+#define PSC_I2SEVNT_RD		(1 << 5)
+#define PSC_I2SEVNT_TD		(1 << 4)
+
+/* PSC in SPI Mode. */
+typedef struct	psc_spi {
+	u32	psc_sel;
+	u32	psc_ctrl;
+	u32	psc_spicfg;
+	u32	psc_spimsk;
+	u32	psc_spipcr;
+	u32	psc_spistat;
+	u32	psc_spievent;
+	u32	psc_spitxrx;
+} psc_spi_t;
+
+/* SPI Config Register. */
+#define PSC_SPICFG_RT_MASK	(3 << 30)
+#define PSC_SPICFG_RT_FIFO1	(0 << 30)
+#define PSC_SPICFG_RT_FIFO2	(1 << 30)
+#define PSC_SPICFG_RT_FIFO4	(2 << 30)
+#define PSC_SPICFG_RT_FIFO8	(3 << 30)
+
+#define PSC_SPICFG_TT_MASK	(3 << 28)
+#define PSC_SPICFG_TT_FIFO1	(0 << 28)
+#define PSC_SPICFG_TT_FIFO2	(1 << 28)
+#define PSC_SPICFG_TT_FIFO4	(2 << 28)
+#define PSC_SPICFG_TT_FIFO8	(3 << 28)
+
+#define PSC_SPICFG_DD_DISABLE	(1 << 27)
+#define PSC_SPICFG_DE_ENABLE	(1 << 26)
+#define PSC_SPICFG_CLR_BAUD(x)	((x) & ~((0x3f) << 15))
+#define PSC_SPICFG_SET_BAUD(x)	(((x) & 0x3f) << 15)
+
+#define PSC_SPICFG_SET_DIV(x)	(((x) & 0x03) << 13)
+#define PSC_SPICFG_DIV2		0
+#define PSC_SPICFG_DIV4		1
+#define PSC_SPICFG_DIV8		2
+#define PSC_SPICFG_DIV16	3
+
+#define PSC_SPICFG_BI		(1 << 12)
+#define PSC_SPICFG_PSE		(1 << 11)
+#define PSC_SPICFG_CGE		(1 << 10)
+#define PSC_SPICFG_CDE		(1 << 9)
+
+#define PSC_SPICFG_CLR_LEN(x)	((x) & ~((0x1f) << 4))
+#define PSC_SPICFG_SET_LEN(x)	(((x-1) & 0x1f) << 4)
+
+#define PSC_SPICFG_LB		(1 << 3)
+#define PSC_SPICFG_MLF		(1 << 1)
+#define PSC_SPICFG_MO		(1 << 0)
+
+/* SPI Mask Register. */
+#define PSC_SPIMSK_MM		(1 << 16)
+#define PSC_SPIMSK_RR		(1 << 13)
+#define PSC_SPIMSK_RO		(1 << 12)
+#define PSC_SPIMSK_RU		(1 << 11)
+#define PSC_SPIMSK_TR		(1 << 10)
+#define PSC_SPIMSK_TO		(1 << 9)
+#define PSC_SPIMSK_TU		(1 << 8)
+#define PSC_SPIMSK_SD		(1 << 5)
+#define PSC_SPIMSK_MD		(1 << 4)
+#define PSC_SPIMSK_ALLMASK	(PSC_SPIMSK_MM | PSC_SPIMSK_RR | \
+				 PSC_SPIMSK_RO | PSC_SPIMSK_TO | \
+				 PSC_SPIMSK_TU | PSC_SPIMSK_SD | \
+				 PSC_SPIMSK_MD)
+
+/* SPI Protocol Control Register. */
+#define PSC_SPIPCR_RC		(1 << 6)
+#define PSC_SPIPCR_SP		(1 << 5)
+#define PSC_SPIPCR_SS		(1 << 4)
+#define PSC_SPIPCR_TC		(1 << 2)
+#define PSC_SPIPCR_MS		(1 << 0)
+
+/* SPI Status register (read only). */
+#define PSC_SPISTAT_RF		(1 << 13)
+#define PSC_SPISTAT_RE		(1 << 12)
+#define PSC_SPISTAT_RR		(1 << 11)
+#define PSC_SPISTAT_TF		(1 << 10)
+#define PSC_SPISTAT_TE		(1 << 9)
+#define PSC_SPISTAT_TR		(1 << 8)
+#define PSC_SPISTAT_SB		(1 << 5)
+#define PSC_SPISTAT_MB		(1 << 4)
+#define PSC_SPISTAT_DI		(1 << 2)
+#define PSC_SPISTAT_DR		(1 << 1)
+#define PSC_SPISTAT_SR		(1 << 0)
+
+/* SPI Event Register. */
+#define PSC_SPIEVNT_MM		(1 << 16)
+#define PSC_SPIEVNT_RR		(1 << 13)
+#define PSC_SPIEVNT_RO		(1 << 12)
+#define PSC_SPIEVNT_RU		(1 << 11)
+#define PSC_SPIEVNT_TR		(1 << 10)
+#define PSC_SPIEVNT_TO		(1 << 9)
+#define PSC_SPIEVNT_TU		(1 << 8)
+#define PSC_SPIEVNT_SD		(1 << 5)
+#define PSC_SPIEVNT_MD		(1 << 4)
+
+/* Transmit register control. */
+#define PSC_SPITXRX_LC		(1 << 29)
+#define PSC_SPITXRX_SR		(1 << 28)
+
+/* SMBus Config Register. */
+#define PSC_SMBCFG_RT_MASK	(3 << 30)
+#define PSC_SMBCFG_RT_FIFO1	(0 << 30)
+#define PSC_SMBCFG_RT_FIFO2	(1 << 30)
+#define PSC_SMBCFG_RT_FIFO4	(2 << 30)
+#define PSC_SMBCFG_RT_FIFO8	(3 << 30)
+
+#define PSC_SMBCFG_TT_MASK	(3 << 28)
+#define PSC_SMBCFG_TT_FIFO1	(0 << 28)
+#define PSC_SMBCFG_TT_FIFO2	(1 << 28)
+#define PSC_SMBCFG_TT_FIFO4	(2 << 28)
+#define PSC_SMBCFG_TT_FIFO8	(3 << 28)
+
+#define PSC_SMBCFG_DD_DISABLE	(1 << 27)
+#define PSC_SMBCFG_DE_ENABLE	(1 << 26)
+
+#define PSC_SMBCFG_SET_DIV(x)	(((x) & 0x03) << 13)
+#define PSC_SMBCFG_DIV2		0
+#define PSC_SMBCFG_DIV4		1
+#define PSC_SMBCFG_DIV8		2
+#define PSC_SMBCFG_DIV16	3
+
+#define PSC_SMBCFG_GCE		(1 << 9)
+#define PSC_SMBCFG_SFM		(1 << 8)
+
+#define PSC_SMBCFG_SET_SLV(x)	(((x) & 0x7f) << 1)
+
+/* SMBus Mask Register. */
+#define PSC_SMBMSK_DN		(1 << 30)
+#define PSC_SMBMSK_AN		(1 << 29)
+#define PSC_SMBMSK_AL		(1 << 28)
+#define PSC_SMBMSK_RR		(1 << 13)
+#define PSC_SMBMSK_RO		(1 << 12)
+#define PSC_SMBMSK_RU		(1 << 11)
+#define PSC_SMBMSK_TR		(1 << 10)
+#define PSC_SMBMSK_TO		(1 << 9)
+#define PSC_SMBMSK_TU		(1 << 8)
+#define PSC_SMBMSK_SD		(1 << 5)
+#define PSC_SMBMSK_MD		(1 << 4)
+#define PSC_SMBMSK_ALLMASK	(PSC_SMBMSK_DN | PSC_SMBMSK_AN | \
+				 PSC_SMBMSK_AL | PSC_SMBMSK_RR | \
+				 PSC_SMBMSK_RO | PSC_SMBMSK_TO | \
+				 PSC_SMBMSK_TU | PSC_SMBMSK_SD | \
+				 PSC_SMBMSK_MD)
+
+/* SMBus Protocol Control Register. */
+#define PSC_SMBPCR_DC		(1 << 2)
+#define PSC_SMBPCR_MS		(1 << 0)
+
+/* SMBus Status register (read only). */
+#define PSC_SMBSTAT_BB		(1 << 28)
+#define PSC_SMBSTAT_RF		(1 << 13)
+#define PSC_SMBSTAT_RE		(1 << 12)
+#define PSC_SMBSTAT_RR		(1 << 11)
+#define PSC_SMBSTAT_TF		(1 << 10)
+#define PSC_SMBSTAT_TE		(1 << 9)
+#define PSC_SMBSTAT_TR		(1 << 8)
+#define PSC_SMBSTAT_SB		(1 << 5)
+#define PSC_SMBSTAT_MB		(1 << 4)
+#define PSC_SMBSTAT_DI		(1 << 2)
+#define PSC_SMBSTAT_DR		(1 << 1)
+#define PSC_SMBSTAT_SR		(1 << 0)
+
+/* SMBus Event Register. */
+#define PSC_SMBEVNT_DN		(1 << 30)
+#define PSC_SMBEVNT_AN		(1 << 29)
+#define PSC_SMBEVNT_AL		(1 << 28)
+#define PSC_SMBEVNT_RR		(1 << 13)
+#define PSC_SMBEVNT_RO		(1 << 12)
+#define PSC_SMBEVNT_RU		(1 << 11)
+#define PSC_SMBEVNT_TR		(1 << 10)
+#define PSC_SMBEVNT_TO		(1 << 9)
+#define PSC_SMBEVNT_TU		(1 << 8)
+#define PSC_SMBEVNT_SD		(1 << 5)
+#define PSC_SMBEVNT_MD		(1 << 4)
+#define PSC_SMBEVNT_ALLCLR	(PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | \
+				 PSC_SMBEVNT_AL | PSC_SMBEVNT_RR | \
+				 PSC_SMBEVNT_RO | PSC_SMBEVNT_TO | \
+				 PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \
+				 PSC_SMBEVNT_MD)
+
+/* Transmit register control. */
+#define PSC_SMBTXRX_RSR		(1 << 28)
+#define PSC_SMBTXRX_STP		(1 << 29)
+#define PSC_SMBTXRX_DATAMASK	0xff
+
+/* SMBus protocol timers register. */
+#define PSC_SMBTMR_SET_TH(x)	(((x) & 0x03) << 30)
+#define PSC_SMBTMR_SET_PS(x)	(((x) & 0x1f) << 25)
+#define PSC_SMBTMR_SET_PU(x)	(((x) & 0x1f) << 20)
+#define PSC_SMBTMR_SET_SH(x)	(((x) & 0x1f) << 15)
+#define PSC_SMBTMR_SET_SU(x)	(((x) & 0x1f) << 10)
+#define PSC_SMBTMR_SET_CL(x)	(((x) & 0x1f) << 5)
+#define PSC_SMBTMR_SET_CH(x)	(((x) & 0x1f) << 0)
+
+#endif /* _AU1000_PSC_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
new file mode 100644
index 000000000..c5b6eef0e
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
@@ -0,0 +1,65 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_MACH_AU1X00_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_AU1X00_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb			1
+#define cpu_has_tlbinv			0
+#define cpu_has_segments		0
+#define cpu_has_eva			0
+#define cpu_has_htw			0
+#define cpu_has_rixiex			0
+#define cpu_has_maar			0
+#define cpu_has_4kex			1
+#define cpu_has_3k_cache		0
+#define cpu_has_4k_cache		1
+#define cpu_has_tx39_cache		0
+#define cpu_has_fpu			0
+#define cpu_has_32fpr			0
+#define cpu_has_counter			1
+#define cpu_has_watch			1
+#define cpu_has_divec			1
+#define cpu_has_vce			0
+#define cpu_has_cache_cdex_p		0
+#define cpu_has_cache_cdex_s		0
+#define cpu_has_prefetch		1
+#define cpu_has_mcheck			1
+#define cpu_has_ejtag			1
+#define cpu_has_llsc			1
+#define cpu_has_mips16			0
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_smartmips		0
+#define cpu_has_rixi			0
+#define cpu_has_mmips			0
+#define cpu_has_vtag_icache		0
+#define cpu_has_dc_aliases		0
+#define cpu_has_ic_fills_f_dc		1
+#define cpu_has_pindexed_dcache		0
+#define cpu_has_mips32r1		1
+#define cpu_has_mips32r2		0
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+#define cpu_has_dsp			0
+#define cpu_has_dsp2			0
+#define cpu_has_mipsmt			0
+#define cpu_has_userlocal		0
+#define cpu_has_nofpuex			0
+#define cpu_has_64bits			0
+#define cpu_has_64bit_zero_reg		0
+#define cpu_has_vint			0
+#define cpu_has_veic			0
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()		32
+#define cpu_icache_line_size()		32
+
+#define cpu_has_perf_cntr_intr_bit	0
+#define cpu_has_vz			0
+#define cpu_has_msa			0
+
+#endif /* __ASM_MACH_AU1X00_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
new file mode 100644
index 000000000..9785e4ebb
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -0,0 +1,658 @@
+/*
+ * GPIO functions for Au1000, Au1500, Au1100, Au1550, Au1200
+ *
+ * Copyright (c) 2009 Manuel Lauss.
+ *
+ * Licensed under the terms outlined in the file COPYING.
+ */
+
+#ifndef _ALCHEMY_GPIO_AU1000_H_
+#define _ALCHEMY_GPIO_AU1000_H_
+
+#include <asm/mach-au1x00/au1000.h>
+
+/* The default GPIO numberspace as documented in the Alchemy manuals.
+ * GPIO0-31 from GPIO1 block,	GPIO200-215 from GPIO2 block.
+ */
+#define ALCHEMY_GPIO1_BASE	0
+#define ALCHEMY_GPIO2_BASE	200
+
+#define ALCHEMY_GPIO1_NUM	32
+#define ALCHEMY_GPIO2_NUM	16
+#define ALCHEMY_GPIO1_MAX	(ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1)
+#define ALCHEMY_GPIO2_MAX	(ALCHEMY_GPIO2_BASE + ALCHEMY_GPIO2_NUM - 1)
+
+#define MAKE_IRQ(intc, off)	(AU1000_INTC##intc##_INT_BASE + (off))
+
+/* GPIO1 registers within SYS_ area */
+#define AU1000_SYS_TRIOUTRD	0x100
+#define AU1000_SYS_TRIOUTCLR	0x100
+#define AU1000_SYS_OUTPUTRD	0x108
+#define AU1000_SYS_OUTPUTSET	0x108
+#define AU1000_SYS_OUTPUTCLR	0x10C
+#define AU1000_SYS_PINSTATERD	0x110
+#define AU1000_SYS_PININPUTEN	0x110
+
+/* register offsets within GPIO2 block */
+#define AU1000_GPIO2_DIR	0x00
+#define AU1000_GPIO2_OUTPUT	0x08
+#define AU1000_GPIO2_PINSTATE	0x0C
+#define AU1000_GPIO2_INTENABLE	0x10
+#define AU1000_GPIO2_ENABLE	0x14
+
+struct gpio;
+
+static inline int au1000_gpio1_to_irq(int gpio)
+{
+	return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
+}
+
+static inline int au1000_gpio2_to_irq(int gpio)
+{
+	return -ENXIO;
+}
+
+static inline int au1000_irq_to_gpio(int irq)
+{
+	if ((irq >= AU1000_GPIO0_INT) && (irq <= AU1000_GPIO31_INT))
+		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO0_INT) + 0;
+
+	return -ENXIO;
+}
+
+static inline int au1500_gpio1_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO1_BASE;
+
+	switch (gpio) {
+	case 0 ... 15:
+	case 20:
+	case 23 ... 28: return MAKE_IRQ(1, gpio);
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1500_gpio2_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO2_BASE;
+
+	switch (gpio) {
+	case 0 ... 3:	return MAKE_IRQ(1, 16 + gpio - 0);
+	case 4 ... 5:	return MAKE_IRQ(1, 21 + gpio - 4);
+	case 6 ... 7:	return MAKE_IRQ(1, 29 + gpio - 6);
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1500_irq_to_gpio(int irq)
+{
+	switch (irq) {
+	case AU1500_GPIO0_INT ... AU1500_GPIO15_INT:
+	case AU1500_GPIO20_INT:
+	case AU1500_GPIO23_INT ... AU1500_GPIO28_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO0_INT) + 0;
+	case AU1500_GPIO200_INT ... AU1500_GPIO203_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO200_INT) + 0;
+	case AU1500_GPIO204_INT ... AU1500_GPIO205_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO204_INT) + 4;
+	case AU1500_GPIO206_INT ... AU1500_GPIO207_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO206_INT) + 6;
+	case AU1500_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + 8;
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1100_gpio1_to_irq(int gpio)
+{
+	return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
+}
+
+static inline int au1100_gpio2_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO2_BASE;
+
+	if ((gpio >= 8) && (gpio <= 15))
+		return MAKE_IRQ(0, 29);		/* shared GPIO208_215 */
+
+	return -ENXIO;
+}
+
+static inline int au1100_irq_to_gpio(int irq)
+{
+	switch (irq) {
+	case AU1100_GPIO0_INT ... AU1100_GPIO31_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1100_GPIO0_INT) + 0;
+	case AU1100_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + 8;
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1550_gpio1_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO1_BASE;
+
+	switch (gpio) {
+	case 0 ... 15:
+	case 20 ... 28: return MAKE_IRQ(1, gpio);
+	case 16 ... 17: return MAKE_IRQ(1, 18 + gpio - 16);
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1550_gpio2_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO2_BASE;
+
+	switch (gpio) {
+	case 0:		return MAKE_IRQ(1, 16);
+	case 1 ... 5:	return MAKE_IRQ(1, 17); /* shared GPIO201_205 */
+	case 6 ... 7:	return MAKE_IRQ(1, 29 + gpio - 6);
+	case 8 ... 15:	return MAKE_IRQ(1, 31); /* shared GPIO208_215 */
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1550_irq_to_gpio(int irq)
+{
+	switch (irq) {
+	case AU1550_GPIO0_INT ... AU1550_GPIO15_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO0_INT) + 0;
+	case AU1550_GPIO200_INT:
+	case AU1550_GPIO201_205_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO200_INT) + 0;
+	case AU1550_GPIO16_INT ... AU1550_GPIO28_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO16_INT) + 16;
+	case AU1550_GPIO206_INT ... AU1550_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO206_INT) + 6;
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1200_gpio1_to_irq(int gpio)
+{
+	return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
+}
+
+static inline int au1200_gpio2_to_irq(int gpio)
+{
+	gpio -= ALCHEMY_GPIO2_BASE;
+
+	switch (gpio) {
+	case 0 ... 2:	return MAKE_IRQ(0, 5 + gpio - 0);
+	case 3:		return MAKE_IRQ(0, 22);
+	case 4 ... 7:	return MAKE_IRQ(0, 24 + gpio - 4);
+	case 8 ... 15:	return MAKE_IRQ(0, 28); /* shared GPIO208_215 */
+	}
+
+	return -ENXIO;
+}
+
+static inline int au1200_irq_to_gpio(int irq)
+{
+	switch (irq) {
+	case AU1200_GPIO0_INT ... AU1200_GPIO31_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1200_GPIO0_INT) + 0;
+	case AU1200_GPIO200_INT ... AU1200_GPIO202_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO200_INT) + 0;
+	case AU1200_GPIO203_INT:
+		return ALCHEMY_GPIO2_BASE + 3;
+	case AU1200_GPIO204_INT ... AU1200_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO204_INT) + 4;
+	}
+
+	return -ENXIO;
+}
+
+/*
+ * GPIO1 block macros for common linux gpio functions.
+ */
+static inline void alchemy_gpio1_set_value(int gpio, int v)
+{
+	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
+	unsigned long r = v ? AU1000_SYS_OUTPUTSET : AU1000_SYS_OUTPUTCLR;
+	alchemy_wrsys(mask, r);
+}
+
+static inline int alchemy_gpio1_get_value(int gpio)
+{
+	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
+	return alchemy_rdsys(AU1000_SYS_PINSTATERD) & mask;
+}
+
+static inline int alchemy_gpio1_direction_input(int gpio)
+{
+	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
+	alchemy_wrsys(mask, AU1000_SYS_TRIOUTCLR);
+	return 0;
+}
+
+static inline int alchemy_gpio1_direction_output(int gpio, int v)
+{
+	/* hardware switches to "output" mode when one of the two
+	 * "set_value" registers is accessed.
+	 */
+	alchemy_gpio1_set_value(gpio, v);
+	return 0;
+}
+
+static inline int alchemy_gpio1_is_valid(int gpio)
+{
+	return ((gpio >= ALCHEMY_GPIO1_BASE) && (gpio <= ALCHEMY_GPIO1_MAX));
+}
+
+static inline int alchemy_gpio1_to_irq(int gpio)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		return au1000_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1100:
+		return au1100_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1500:
+		return au1500_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1550:
+		return au1550_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1200:
+		return au1200_gpio1_to_irq(gpio);
+	}
+	return -ENXIO;
+}
+
+/*
+ * GPIO2 block macros for common linux GPIO functions. The 'gpio'
+ * parameter must be in range of ALCHEMY_GPIO2_BASE..ALCHEMY_GPIO2_MAX.
+ */
+static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE);
+	unsigned long d = __raw_readl(base + AU1000_GPIO2_DIR);
+
+	if (to_out)
+		d |= mask;
+	else
+		d &= ~mask;
+	__raw_writel(d, base + AU1000_GPIO2_DIR);
+	wmb();
+}
+
+static inline void alchemy_gpio2_set_value(int gpio, int v)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	unsigned long mask;
+	mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE);
+	__raw_writel(mask, base + AU1000_GPIO2_OUTPUT);
+	wmb();
+}
+
+static inline int alchemy_gpio2_get_value(int gpio)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	return __raw_readl(base + AU1000_GPIO2_PINSTATE) &
+				(1 << (gpio - ALCHEMY_GPIO2_BASE));
+}
+
+static inline int alchemy_gpio2_direction_input(int gpio)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+	__alchemy_gpio2_mod_dir(gpio, 0);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static inline int alchemy_gpio2_direction_output(int gpio, int v)
+{
+	unsigned long flags;
+	alchemy_gpio2_set_value(gpio, v);
+	local_irq_save(flags);
+	__alchemy_gpio2_mod_dir(gpio, 1);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static inline int alchemy_gpio2_is_valid(int gpio)
+{
+	return ((gpio >= ALCHEMY_GPIO2_BASE) && (gpio <= ALCHEMY_GPIO2_MAX));
+}
+
+static inline int alchemy_gpio2_to_irq(int gpio)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		return au1000_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1100:
+		return au1100_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1500:
+		return au1500_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1550:
+		return au1550_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1200:
+		return au1200_gpio2_to_irq(gpio);
+	}
+	return -ENXIO;
+}
+
+/**********************************************************************/
+
+/* GPIO2 shared interrupts and control */
+
+static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	unsigned long r = __raw_readl(base + AU1000_GPIO2_INTENABLE);
+	if (en)
+		r |= 1 << gpio2;
+	else
+		r &= ~(1 << gpio2);
+	__raw_writel(r, base + AU1000_GPIO2_INTENABLE);
+	wmb();
+}
+
+/**
+ * alchemy_gpio2_enable_int - Enable a GPIO2 pins' shared irq contribution.
+ * @gpio2:	The GPIO2 pin to activate (200...215).
+ *
+ * GPIO208-215 have one shared interrupt line to the INTC.  They are
+ * and'ed with a per-pin enable bit and finally or'ed together to form
+ * a single irq request (useful for active-high sources).
+ * With this function, a pins' individual contribution to the int request
+ * can be enabled.  As with all other GPIO-based interrupts, the INTC
+ * must be programmed to accept the GPIO208_215 interrupt as well.
+ *
+ * NOTE: Calling this macro is only necessary for GPIO208-215; all other
+ * GPIO2-based interrupts have their own request to the INTC.  Please
+ * consult your Alchemy databook for more information!
+ *
+ * NOTE: On the Au1550, GPIOs 201-205 also have a shared interrupt request
+ * line to the INTC, GPIO201_205.  This function can be used for those
+ * as well.
+ *
+ * NOTE: 'gpio2' parameter must be in range of the GPIO2 numberspace
+ * (200-215 by default). No sanity checks are made,
+ */
+static inline void alchemy_gpio2_enable_int(int gpio2)
+{
+	unsigned long flags;
+
+	gpio2 -= ALCHEMY_GPIO2_BASE;
+
+	/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1100:
+	case ALCHEMY_CPU_AU1500:
+		gpio2 -= 8;
+	}
+
+	local_irq_save(flags);
+	__alchemy_gpio2_mod_int(gpio2, 1);
+	local_irq_restore(flags);
+}
+
+/**
+ * alchemy_gpio2_disable_int - Disable a GPIO2 pins' shared irq contribution.
+ * @gpio2:	The GPIO2 pin to activate (200...215).
+ *
+ * see function alchemy_gpio2_enable_int() for more information.
+ */
+static inline void alchemy_gpio2_disable_int(int gpio2)
+{
+	unsigned long flags;
+
+	gpio2 -= ALCHEMY_GPIO2_BASE;
+
+	/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1100:
+	case ALCHEMY_CPU_AU1500:
+		gpio2 -= 8;
+	}
+
+	local_irq_save(flags);
+	__alchemy_gpio2_mod_int(gpio2, 0);
+	local_irq_restore(flags);
+}
+
+/**
+ * alchemy_gpio2_enable -  Activate GPIO2 block.
+ *
+ * The GPIO2 block must be enabled excplicitly to work.	 On systems
+ * where this isn't done by the bootloader, this macro can be used.
+ */
+static inline void alchemy_gpio2_enable(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	__raw_writel(3, base + AU1000_GPIO2_ENABLE);	/* reset, clock enabled */
+	wmb();
+	__raw_writel(1, base + AU1000_GPIO2_ENABLE);	/* clock enabled */
+	wmb();
+}
+
+/**
+ * alchemy_gpio2_disable - disable GPIO2 block.
+ *
+ * Disable and put GPIO2 block in low-power mode.
+ */
+static inline void alchemy_gpio2_disable(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	__raw_writel(2, base + AU1000_GPIO2_ENABLE);	/* reset, clock disabled */
+	wmb();
+}
+
+/**********************************************************************/
+
+/* wrappers for on-chip gpios; can be used before gpio chips have been
+ * registered with gpiolib.
+ */
+static inline int alchemy_gpio_direction_input(int gpio)
+{
+	return (gpio >= ALCHEMY_GPIO2_BASE) ?
+		alchemy_gpio2_direction_input(gpio) :
+		alchemy_gpio1_direction_input(gpio);
+}
+
+static inline int alchemy_gpio_direction_output(int gpio, int v)
+{
+	return (gpio >= ALCHEMY_GPIO2_BASE) ?
+		alchemy_gpio2_direction_output(gpio, v) :
+		alchemy_gpio1_direction_output(gpio, v);
+}
+
+static inline int alchemy_gpio_get_value(int gpio)
+{
+	return (gpio >= ALCHEMY_GPIO2_BASE) ?
+		alchemy_gpio2_get_value(gpio) :
+		alchemy_gpio1_get_value(gpio);
+}
+
+static inline void alchemy_gpio_set_value(int gpio, int v)
+{
+	if (gpio >= ALCHEMY_GPIO2_BASE)
+		alchemy_gpio2_set_value(gpio, v);
+	else
+		alchemy_gpio1_set_value(gpio, v);
+}
+
+static inline int alchemy_gpio_is_valid(int gpio)
+{
+	return (gpio >= ALCHEMY_GPIO2_BASE) ?
+		alchemy_gpio2_is_valid(gpio) :
+		alchemy_gpio1_is_valid(gpio);
+}
+
+static inline int alchemy_gpio_cansleep(int gpio)
+{
+	return 0;	/* Alchemy never gets tired */
+}
+
+static inline int alchemy_gpio_to_irq(int gpio)
+{
+	return (gpio >= ALCHEMY_GPIO2_BASE) ?
+		alchemy_gpio2_to_irq(gpio) :
+		alchemy_gpio1_to_irq(gpio);
+}
+
+static inline int alchemy_irq_to_gpio(int irq)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		return au1000_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1100:
+		return au1100_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1500:
+		return au1500_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1550:
+		return au1550_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1200:
+		return au1200_irq_to_gpio(irq);
+	}
+	return -ENXIO;
+}
+
+/**********************************************************************/
+
+/* Linux gpio framework integration.
+ *
+ * 4 use cases of Au1000-Au1200 GPIOS:
+ *(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
+ *	Board must register gpiochips.
+ *(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
+ *	2 (1 for Au1000) gpio_chips are registered.
+ *
+ *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
+ *	the boards' gpio.h must provide the linux gpio wrapper functions,
+ *
+ *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
+ *	inlinable gpio functions are provided which enable access to the
+ *	Au1000 gpios only by using the numbers straight out of the data-
+ *	sheets.
+
+ * Cases 1 and 3 are intended for boards which want to provide their own
+ * GPIO namespace and -operations (i.e. for example you have 8 GPIOs
+ * which are in part provided by spare Au1000 GPIO pins and in part by
+ * an external FPGA but you still want them to be accssible in linux
+ * as gpio0-7. The board can of course use the alchemy_gpioX_* functions
+ * as required).
+ */
+
+#ifndef CONFIG_GPIOLIB
+
+#ifdef CONFIG_ALCHEMY_GPIOINT_AU1000
+
+#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (4) */
+
+static inline int gpio_direction_input(int gpio)
+{
+	return alchemy_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(int gpio, int v)
+{
+	return alchemy_gpio_direction_output(gpio, v);
+}
+
+static inline int gpio_get_value(int gpio)
+{
+	return alchemy_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(int gpio, int v)
+{
+	alchemy_gpio_set_value(gpio, v);
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+	return gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+}
+
+static inline int gpio_is_valid(int gpio)
+{
+	return alchemy_gpio_is_valid(gpio);
+}
+
+static inline int gpio_cansleep(int gpio)
+{
+	return alchemy_gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(int gpio)
+{
+	return alchemy_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	return alchemy_irq_to_gpio(irq);
+}
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_one(unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline void gpio_free_array(struct gpio *array, size_t num)
+{
+}
+
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_export_link(struct device *dev, const char *name,
+				   unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
+{
+	return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+
+#endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
+
+#endif	/* CONFIG_ALCHEMY_GPIOINT_AU1000 */
+
+#endif	/* !CONFIG_GPIOLIB */
+
+#endif /* _ALCHEMY_GPIO_AU1000_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
new file mode 100644
index 000000000..ce0289427
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
@@ -0,0 +1,259 @@
+/*
+ * gpio-au1300.h -- GPIO control for Au1300 GPIC and compatibles.
+ *
+ * Copyright (c) 2009-2011 Manuel Lauss <manuel.lauss@googlemail.com>
+ */
+
+#ifndef _GPIO_AU1300_H_
+#define _GPIO_AU1300_H_
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+
+struct gpio;
+struct gpio_chip;
+
+/* with the current GPIC design, up to 128 GPIOs are possible.
+ * The only implementation so far is in the Au1300, which has 75 externally
+ * available GPIOs.
+ */
+#define AU1300_GPIO_BASE	0
+#define AU1300_GPIO_NUM		75
+#define AU1300_GPIO_MAX		(AU1300_GPIO_BASE + AU1300_GPIO_NUM - 1)
+
+#define AU1300_GPIC_ADDR	\
+	(void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR)
+
+static inline int au1300_gpio_get_value(unsigned int gpio)
+{
+	void __iomem *roff = AU1300_GPIC_ADDR;
+	int bit;
+
+	gpio -= AU1300_GPIO_BASE;
+	roff += GPIC_GPIO_BANKOFF(gpio);
+	bit = GPIC_GPIO_TO_BIT(gpio);
+	return __raw_readl(roff + AU1300_GPIC_PINVAL) & bit;
+}
+
+static inline int au1300_gpio_direction_input(unsigned int gpio)
+{
+	void __iomem *roff = AU1300_GPIC_ADDR;
+	unsigned long bit;
+
+	gpio -= AU1300_GPIO_BASE;
+
+	roff += GPIC_GPIO_BANKOFF(gpio);
+	bit = GPIC_GPIO_TO_BIT(gpio);
+	__raw_writel(bit, roff + AU1300_GPIC_DEVCLR);
+	wmb();
+
+	return 0;
+}
+
+static inline int au1300_gpio_set_value(unsigned int gpio, int v)
+{
+	void __iomem *roff = AU1300_GPIC_ADDR;
+	unsigned long bit;
+
+	gpio -= AU1300_GPIO_BASE;
+
+	roff += GPIC_GPIO_BANKOFF(gpio);
+	bit = GPIC_GPIO_TO_BIT(gpio);
+	__raw_writel(bit, roff + (v ? AU1300_GPIC_PINVAL
+				    : AU1300_GPIC_PINVALCLR));
+	wmb();
+
+	return 0;
+}
+
+static inline int au1300_gpio_direction_output(unsigned int gpio, int v)
+{
+	/* hw switches to output automatically */
+	return au1300_gpio_set_value(gpio, v);
+}
+
+static inline int au1300_gpio_to_irq(unsigned int gpio)
+{
+	return AU1300_FIRST_INT + (gpio - AU1300_GPIO_BASE);
+}
+
+static inline int au1300_irq_to_gpio(unsigned int irq)
+{
+	return (irq - AU1300_FIRST_INT) + AU1300_GPIO_BASE;
+}
+
+static inline int au1300_gpio_is_valid(unsigned int gpio)
+{
+	int ret;
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1300:
+		ret = ((gpio >= AU1300_GPIO_BASE) && (gpio <= AU1300_GPIO_MAX));
+		break;
+	default:
+		ret = 0;
+	}
+	return ret;
+}
+
+static inline int au1300_gpio_cansleep(unsigned int gpio)
+{
+	return 0;
+}
+
+/* hardware remembers gpio 0-63 levels on powerup */
+static inline int au1300_gpio_getinitlvl(unsigned int gpio)
+{
+	void __iomem *roff = AU1300_GPIC_ADDR;
+	unsigned long v;
+
+	if (unlikely(gpio > 63))
+		return 0;
+	else if (gpio > 31) {
+		gpio -= 32;
+		roff += 4;
+	}
+
+	v = __raw_readl(roff + AU1300_GPIC_RSTVAL);
+	return (v >> gpio) & 1;
+}
+
+/**********************************************************************/
+
+/* Linux gpio framework integration.
+*
+* 4 use cases of Alchemy GPIOS:
+*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
+*	Board must register gpiochips.
+*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
+*	A gpiochip for the 75 GPIOs is registered.
+*
+*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
+*	the boards' gpio.h must provide the linux gpio wrapper functions,
+*
+*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
+*	inlinable gpio functions are provided which enable access to the
+*	Au1300 gpios only by using the numbers straight out of the data-
+*	sheets.
+
+* Cases 1 and 3 are intended for boards which want to provide their own
+* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
+* which are in part provided by spare Au1300 GPIO pins and in part by
+* an external FPGA but you still want them to be accssible in linux
+* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
+* as required).
+*/
+
+#ifndef CONFIG_GPIOLIB
+
+#ifdef CONFIG_ALCHEMY_GPIOINT_AU1300
+
+#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (4) */
+
+static inline int gpio_direction_input(unsigned int gpio)
+{
+	return au1300_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned int gpio, int v)
+{
+	return au1300_gpio_direction_output(gpio, v);
+}
+
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return au1300_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int v)
+{
+	au1300_gpio_set_value(gpio, v);
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+	return gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+}
+
+static inline int gpio_is_valid(unsigned int gpio)
+{
+	return au1300_gpio_is_valid(gpio);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return au1300_gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return au1300_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return au1300_irq_to_gpio(irq);
+}
+
+static inline int gpio_request(unsigned int gpio, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_one(unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline void gpio_free_array(struct gpio *array, size_t num)
+{
+}
+
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+	return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_export_link(struct device *dev, const char *name,
+				   unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+#endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
+
+#endif	/* CONFIG_ALCHEMY_GPIOINT_AU1300 */
+
+#endif	/* CONFIG GPIOLIB */
+
+#endif /* _GPIO_AU1300_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h
new file mode 100644
index 000000000..22e7ff17f
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/gpio.h
@@ -0,0 +1,86 @@
+/*
+ * Alchemy GPIO support.
+ *
+ * With CONFIG_GPIOLIB=y different types of on-chip GPIO can be supported within
+ *  the same kernel image.
+ * With CONFIG_GPIOLIB=n, your board must select ALCHEMY_GPIOINT_AU1XXX for the
+ *  appropriate CPU type (AU1000 currently).
+ */
+
+#ifndef _ALCHEMY_GPIO_H_
+#define _ALCHEMY_GPIO_H_
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
+
+/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
+ * SYS_PININPUTEN is written to at least once.  On Au1550/Au1200/Au1300 this
+ * register enables use of GPIOs as wake source.
+ */
+static inline void alchemy_gpio1_input_enable(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+	__raw_writel(0, base + 0x110);		/* the write op is key */
+	wmb();
+}
+
+
+/* Linux gpio framework integration.
+*
+* 4 use cases of Alchemy GPIOS:
+*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
+*	Board must register gpiochips.
+*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
+*	A gpiochip for the 75 GPIOs is registered.
+*
+*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
+*	the boards' gpio.h must provide	the linux gpio wrapper functions,
+*
+*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
+*	inlinable gpio functions are provided which enable access to the
+*	Au1300 gpios only by using the numbers straight out of the data-
+*	sheets.
+
+* Cases 1 and 3 are intended for boards which want to provide their own
+* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
+* which are in part provided by spare Au1300 GPIO pins and in part by
+* an external FPGA but you still want them to be accssible in linux
+* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
+* as required).
+*/
+
+#ifdef CONFIG_GPIOLIB
+
+/* wraps the cpu-dependent irq_to_gpio functions */
+/* FIXME: gpiolib needs an irq_to_gpio hook */
+static inline int __au_irq_to_gpio(unsigned int irq)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
+		return alchemy_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1300:
+		return au1300_irq_to_gpio(irq);
+	}
+	return -EINVAL;
+}
+
+
+/* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
+#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (2) */
+
+/* get everything through gpiolib */
+#define gpio_to_irq	__gpio_to_irq
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define irq_to_gpio	__au_irq_to_gpio
+
+#include <asm-generic/gpio.h>
+
+#endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
+
+
+#endif	/* CONFIG_GPIOLIB */
+
+#endif	/* _ALCHEMY_GPIO_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h
new file mode 100644
index 000000000..99fea1fbb
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/ioremap.h
@@ -0,0 +1,42 @@
+/*
+ *	include/asm-mips/mach-au1x00/ioremap.h
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_AU1X00_IOREMAP_H
+#define __ASM_MACH_AU1X00_IOREMAP_H
+
+#include <linux/types.h>
+
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI)
+extern phys_addr_t __fixup_bigphys_addr(phys_addr_t, phys_addr_t);
+#else
+static inline phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
+{
+	return phys_addr;
+}
+#endif
+
+/*
+ * Allow physical addresses to be fixed up to help 36-bit peripherals.
+ */
+static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
+{
+	return __fixup_bigphys_addr(phys_addr, size);
+}
+
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
+	unsigned long flags)
+{
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_AU1X00_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-au1x00/prom.h b/arch/mips/include/asm/mach-au1x00/prom.h
new file mode 100644
index 000000000..4c0e09cf1
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/prom.h
@@ -0,0 +1,12 @@
+#ifndef __AU1X00_PROM_H
+#define __AU1X00_PROM_H
+
+extern int prom_argc;
+extern char **prom_argv;
+extern char **prom_envp;
+
+extern void prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+extern int prom_get_ethernet_addr(char *ethernet_addr);
+
+#endif