summaryrefslogtreecommitdiff
path: root/arch/mips/include/asm/sn/sn0
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /arch/mips/include/asm/sn/sn0
Initial import
Diffstat (limited to 'arch/mips/include/asm/sn/sn0')
-rw-r--r--arch/mips/include/asm/sn/sn0/addrs.h288
-rw-r--r--arch/mips/include/asm/sn/sn0/arch.h72
-rw-r--r--arch/mips/include/asm/sn/sn0/hub.h40
-rw-r--r--arch/mips/include/asm/sn/sn0/hubio.h972
-rw-r--r--arch/mips/include/asm/sn/sn0/hubmd.h789
-rw-r--r--arch/mips/include/asm/sn/sn0/hubni.h255
-rw-r--r--arch/mips/include/asm/sn/sn0/hubpi.h409
-rw-r--r--arch/mips/include/asm/sn/sn0/ip27.h85
8 files changed, 2910 insertions, 0 deletions
diff --git a/arch/mips/include/asm/sn/sn0/addrs.h b/arch/mips/include/asm/sn/sn0/addrs.h
new file mode 100644
index 000000000..6b53070f4
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/addrs.h
@@ -0,0 +1,288 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/addrs.h>, revision 1.126.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_ADDRS_H
+#define _ASM_SN_SN0_ADDRS_H
+
+
+/*
+ * SN0 (on a T5) Address map
+ *
+ * This file contains a set of definitions and macros which are used
+ * to reference into the major address spaces (CAC, HSPEC, IO, MSPEC,
+ * and UNCAC) used by the SN0 architecture. It also contains addresses
+ * for "major" statically locatable PROM/Kernel data structures, such as
+ * the partition table, the configuration data structure, etc.
+ * We make an implicit assumption that the processor using this file
+ * follows the R10K's provisions for specifying uncached attributes;
+ * should this change, the base registers may very well become processor-
+ * dependent.
+ *
+ * For more information on the address spaces, see the "Local Resources"
+ * chapter of the Hub specification.
+ *
+ * NOTE: This header file is included both by C and by assembler source
+ * files. Please bracket any language-dependent definitions
+ * appropriately.
+ */
+
+/*
+ * Some of the macros here need to be casted to appropriate types when used
+ * from C. They definitely must not be casted from assembly language so we
+ * use some new ANSI preprocessor stuff to paste these on where needed.
+ */
+
+/*
+ * The following couple of definitions will eventually need to be variables,
+ * since the amount of address space assigned to each node depends on
+ * whether the system is running in N-mode (more nodes with less memory)
+ * or M-mode (fewer nodes with more memory). We expect that it will
+ * be a while before we need to make this decision dynamically, though,
+ * so for now we just use defines bracketed by an ifdef.
+ */
+
+#ifdef CONFIG_SGI_SN_N_MODE
+
+#define NODE_SIZE_BITS 31
+#define BWIN_SIZE_BITS 28
+
+#define NASID_BITS 9
+#define NASID_BITMASK (0x1ffLL)
+#define NASID_SHFT 31
+#define NASID_META_BITS 5
+#define NASID_LOCAL_BITS 4
+
+#define BDDIR_UPPER_MASK (UINT64_CAST 0x7ffff << 10)
+#define BDECC_UPPER_MASK (UINT64_CAST 0x3ffffff << 3)
+
+#else /* !defined(CONFIG_SGI_SN_N_MODE), assume that M-mode is desired */
+
+#define NODE_SIZE_BITS 32
+#define BWIN_SIZE_BITS 29
+
+#define NASID_BITMASK (0xffLL)
+#define NASID_BITS 8
+#define NASID_SHFT 32
+#define NASID_META_BITS 4
+#define NASID_LOCAL_BITS 4
+
+#define BDDIR_UPPER_MASK (UINT64_CAST 0xfffff << 10)
+#define BDECC_UPPER_MASK (UINT64_CAST 0x7ffffff << 3)
+
+#endif /* !defined(CONFIG_SGI_SN_N_MODE) */
+
+#define NODE_ADDRSPACE_SIZE (UINT64_CAST 1 << NODE_SIZE_BITS)
+
+#define NASID_MASK (UINT64_CAST NASID_BITMASK << NASID_SHFT)
+#define NASID_GET(_pa) (int) ((UINT64_CAST (_pa) >> \
+ NASID_SHFT) & NASID_BITMASK)
+
+#if !defined(__ASSEMBLY__)
+
+#define NODE_SWIN_BASE(nasid, widget) \
+ ((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN) \
+ : RAW_NODE_SWIN_BASE(nasid, widget))
+#else /* __ASSEMBLY__ */
+#define NODE_SWIN_BASE(nasid, widget) \
+ (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS))
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The following definitions pertain to the IO special address
+ * space. They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define BWIN_INDEX_BITS 3
+#define BWIN_SIZE (UINT64_CAST 1 << BWIN_SIZE_BITS)
+#define BWIN_SIZEMASK (BWIN_SIZE - 1)
+#define BWIN_WIDGET_MASK 0x7
+#define NODE_BWIN_BASE0(nasid) (NODE_IO_BASE(nasid) + BWIN_SIZE)
+#define NODE_BWIN_BASE(nasid, bigwin) (NODE_BWIN_BASE0(nasid) + \
+ (UINT64_CAST(bigwin) << BWIN_SIZE_BITS))
+
+#define BWIN_WIDGETADDR(addr) ((addr) & BWIN_SIZEMASK)
+#define BWIN_WINDOWNUM(addr) (((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+/*
+ * Verify if addr belongs to large window address of node with "nasid"
+ *
+ *
+ * NOTE: "addr" is expected to be XKPHYS address, and NOT physical
+ * address
+ *
+ *
+ */
+
+#define NODE_BWIN_ADDR(nasid, addr) \
+ (((addr) >= NODE_BWIN_BASE0(nasid)) && \
+ ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \
+ BWIN_SIZE)))
+
+/*
+ * The following define the major position-independent aliases used
+ * in SN0.
+ * CALIAS -- Varies in size, points to the first n bytes of memory
+ * on the reader's node.
+ */
+
+#define CALIAS_BASE CAC_BASE
+
+
+
+#define BRIDGE_REG_PTR(_base, _off) ((volatile bridgereg_t *) \
+ ((__psunsigned_t)(_base) + (__psunsigned_t)(_off)))
+
+#define SN0_WIDGET_BASE(_nasid, _wid) (NODE_SWIN_BASE((_nasid), (_wid)))
+
+/* Turn on sable logging for the processors whose bits are set. */
+#define SABLE_LOG_TRIGGER(_map)
+
+#ifndef __ASSEMBLY__
+#define KERN_NMI_ADDR(nasid, slice) \
+ TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + \
+ (IP27_NMI_KREGS_CPU_SIZE * (slice)))
+#endif /* !__ASSEMBLY__ */
+
+#ifdef PROM
+
+#define MISC_PROM_BASE PHYS_TO_K0(0x01300000)
+#define MISC_PROM_SIZE 0x200000
+
+#define DIAG_BASE PHYS_TO_K0(0x01500000)
+#define DIAG_SIZE 0x300000
+
+#define ROUTE_BASE PHYS_TO_K0(0x01800000)
+#define ROUTE_SIZE 0x200000
+
+#define IP27PROM_FLASH_HDR PHYS_TO_K0(0x01300000)
+#define IP27PROM_FLASH_DATA PHYS_TO_K0(0x01301000)
+#define IP27PROM_CORP_MAX 32
+#define IP27PROM_CORP PHYS_TO_K0(0x01800000)
+#define IP27PROM_CORP_SIZE 0x10000
+#define IP27PROM_CORP_STK PHYS_TO_K0(0x01810000)
+#define IP27PROM_CORP_STKSIZE 0x2000
+#define IP27PROM_DECOMP_BUF PHYS_TO_K0(0x01900000)
+#define IP27PROM_DECOMP_SIZE 0xfff00
+
+#define IP27PROM_BASE PHYS_TO_K0(0x01a00000)
+#define IP27PROM_BASE_MAPPED (UNCAC_BASE | 0x1fc00000)
+#define IP27PROM_SIZE_MAX 0x100000
+
+#define IP27PROM_PCFG PHYS_TO_K0(0x01b00000)
+#define IP27PROM_PCFG_SIZE 0xd0000
+#define IP27PROM_ERRDMP PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_ERRDMP_SIZE 0xf000
+
+#define IP27PROM_INIT_START PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_CONSOLE PHYS_TO_K1(0x01bdf000)
+#define IP27PROM_CONSOLE_SIZE 0x200
+#define IP27PROM_NETUART PHYS_TO_K1(0x01bdf200)
+#define IP27PROM_NETUART_SIZE 0x100
+#define IP27PROM_UNUSED1 PHYS_TO_K1(0x01bdf300)
+#define IP27PROM_UNUSED1_SIZE 0x500
+#define IP27PROM_ELSC_BASE_A PHYS_TO_K0(0x01bdf800)
+#define IP27PROM_ELSC_BASE_B PHYS_TO_K0(0x01bdfc00)
+#define IP27PROM_STACK_A PHYS_TO_K0(0x01be0000)
+#define IP27PROM_STACK_B PHYS_TO_K0(0x01bf0000)
+#define IP27PROM_STACK_SHFT 16
+#define IP27PROM_STACK_SIZE (1 << IP27PROM_STACK_SHFT)
+#define IP27PROM_INIT_END PHYS_TO_K0(0x01c00000)
+
+#define SLAVESTACK_BASE PHYS_TO_K0(0x01580000)
+#define SLAVESTACK_SIZE 0x40000
+
+#define ENETBUFS_BASE PHYS_TO_K0(0x01f80000)
+#define ENETBUFS_SIZE 0x20000
+
+#define IO6PROM_BASE PHYS_TO_K0(0x01c00000)
+#define IO6PROM_SIZE 0x400000
+#define IO6PROM_BASE_MAPPED (UNCAC_BASE | 0x11c00000)
+#define IO6DPROM_BASE PHYS_TO_K0(0x01c00000)
+#define IO6DPROM_SIZE 0x200000
+
+#define NODEBUGUNIX_ADDR PHYS_TO_K0(0x00019000)
+#define DEBUGUNIX_ADDR PHYS_TO_K0(0x00100000)
+
+#define IP27PROM_INT_LAUNCH 10 /* and 11 */
+#define IP27PROM_INT_NETUART 12 /* through 17 */
+
+#endif /* PROM */
+
+/*
+ * needed by symmon so it needs to be outside #if PROM
+ */
+#define IP27PROM_ELSC_SHFT 10
+#define IP27PROM_ELSC_SIZE (1 << IP27PROM_ELSC_SHFT)
+
+/*
+ * This address is used by IO6PROM to build MemoryDescriptors of
+ * free memory. This address is important since unix gets loaded
+ * at this address, and this memory has to be FREE if unix is to
+ * be loaded.
+ */
+
+#define FREEMEM_BASE PHYS_TO_K0(0x2000000)
+
+#define IO6PROM_STACK_SHFT 14 /* stack per cpu */
+#define IO6PROM_STACK_SIZE (1 << IO6PROM_STACK_SHFT)
+
+/*
+ * IP27 PROM vectors
+ */
+
+#define IP27PROM_ENTRY PHYS_TO_COMPATK1(0x1fc00000)
+#define IP27PROM_RESTART PHYS_TO_COMPATK1(0x1fc00008)
+#define IP27PROM_SLAVELOOP PHYS_TO_COMPATK1(0x1fc00010)
+#define IP27PROM_PODMODE PHYS_TO_COMPATK1(0x1fc00018)
+#define IP27PROM_IOC3UARTPOD PHYS_TO_COMPATK1(0x1fc00020)
+#define IP27PROM_FLASHLEDS PHYS_TO_COMPATK1(0x1fc00028)
+#define IP27PROM_REPOD PHYS_TO_COMPATK1(0x1fc00030)
+#define IP27PROM_LAUNCHSLAVE PHYS_TO_COMPATK1(0x1fc00038)
+#define IP27PROM_WAITSLAVE PHYS_TO_COMPATK1(0x1fc00040)
+#define IP27PROM_POLLSLAVE PHYS_TO_COMPATK1(0x1fc00048)
+
+#define KL_UART_BASE LOCAL_HUB_ADDR(MD_UREG0_0) /* base of UART regs */
+#define KL_UART_CMD LOCAL_HUB_ADDR(MD_UREG0_0) /* UART command reg */
+#define KL_UART_DATA LOCAL_HUB_ADDR(MD_UREG0_1) /* UART data reg */
+#define KL_I2C_REG MD_UREG0_0 /* I2C reg */
+
+#ifndef __ASSEMBLY__
+
+/* Address 0x400 to 0x1000 ualias points to cache error eframe + misc
+ * CACHE_ERR_SP_PTR could either contain an address to the stack, or
+ * the stack could start at CACHE_ERR_SP_PTR
+ */
+#if defined(HUB_ERR_STS_WAR)
+#define CACHE_ERR_EFRAME 0x480
+#else /* HUB_ERR_STS_WAR */
+#define CACHE_ERR_EFRAME 0x400
+#endif /* HUB_ERR_STS_WAR */
+
+#define CACHE_ERR_ECCFRAME (CACHE_ERR_EFRAME + EF_SIZE)
+#define CACHE_ERR_SP_PTR (0x1000 - 32) /* why -32? TBD */
+#define CACHE_ERR_IBASE_PTR (0x1000 - 40)
+#define CACHE_ERR_SP (CACHE_ERR_SP_PTR - 16)
+#define CACHE_ERR_AREA_SIZE (ARCS_SPB_OFFSET - CACHE_ERR_EFRAME)
+
+#endif /* !__ASSEMBLY__ */
+
+#define _ARCSPROM
+
+#if defined(HUB_ERR_STS_WAR)
+
+#define ERR_STS_WAR_REGISTER IIO_IIBUSERR
+#define ERR_STS_WAR_ADDR LOCAL_HUB_ADDR(IIO_IIBUSERR)
+#define ERR_STS_WAR_PHYSADDR TO_PHYS((__psunsigned_t)ERR_STS_WAR_ADDR)
+ /* Used to match addr in error reg. */
+#define OLD_ERR_STS_WAR_OFFSET ((MD_MEM_BANKS * MD_BANK_SIZE) - 0x100)
+
+#endif /* HUB_ERR_STS_WAR */
+
+#endif /* _ASM_SN_SN0_ADDRS_H */
diff --git a/arch/mips/include/asm/sn/sn0/arch.h b/arch/mips/include/asm/sn/sn0/arch.h
new file mode 100644
index 000000000..425a67e6a
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/arch.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI IP27 specific setup.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SN_SN0_ARCH_H
+#define _ASM_SN_SN0_ARCH_H
+
+
+#ifndef SN0XXL /* 128 cpu SMP max */
+/*
+ * This is the maximum number of nodes that can be part of a kernel.
+ * Effectively, it's the maximum number of compact node ids (cnodeid_t).
+ */
+#define MAX_COMPACT_NODES 64
+
+/*
+ * MAXCPUS refers to the maximum number of CPUs in a single kernel.
+ * This is not necessarily the same as MAXNODES * CPUS_PER_NODE
+ */
+#define MAXCPUS 128
+
+#else /* SN0XXL system */
+
+#define MAX_COMPACT_NODES 128
+#define MAXCPUS 256
+
+#endif /* SN0XXL */
+
+/*
+ * This is the maximum number of NASIDS that can be present in a system.
+ * (Highest NASID plus one.)
+ */
+#define MAX_NASIDS 256
+
+/*
+ * MAX_REGIONS refers to the maximum number of hardware partitioned regions.
+ */
+#define MAX_REGIONS 64
+#define MAX_NONPREMIUM_REGIONS 16
+#define MAX_PREMIUM_REGIONS MAX_REGIONS
+
+/*
+ * MAX_PARITIONS refers to the maximum number of logically defined
+ * partitions the system can support.
+ */
+#define MAX_PARTITIONS MAX_REGIONS
+
+#define NASID_MASK_BYTES ((MAX_NASIDS + 7) / 8)
+
+/*
+ * Slot constants for SN0
+ */
+#ifdef CONFIG_SGI_SN_N_MODE
+#define MAX_MEM_SLOTS 16 /* max slots per node */
+#else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */
+#define MAX_MEM_SLOTS 32 /* max slots per node */
+#endif /* CONFIG_SGI_SN_M_MODE */
+
+#define SLOT_SHIFT (27)
+#define SLOT_MIN_MEM_SIZE (32*1024*1024)
+
+#define CPUS_PER_NODE 2 /* CPUs on a single hub */
+#define CPUS_PER_NODE_SHFT 1 /* Bits to shift in the node number */
+#define CPUS_PER_SUBNODE 2 /* CPUs on a single hub PI */
+
+#endif /* _ASM_SN_SN0_ARCH_H */
diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h
new file mode 100644
index 000000000..d78dd76d5
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hub.h
@@ -0,0 +1,40 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_HUB_H
+#define _ASM_SN_SN0_HUB_H
+
+/* The secret password; used to release protection */
+#define HUB_PASSWORD 0x53474972756c6573ull
+
+#define CHIPID_HUB 0
+#define CHIPID_ROUTER 1
+
+#define HUB_REV_1_0 1
+#define HUB_REV_2_0 2
+#define HUB_REV_2_1 3
+#define HUB_REV_2_2 4
+#define HUB_REV_2_3 5
+#define HUB_REV_2_4 6
+
+#define MAX_HUB_PATH 80
+
+#include <asm/sn/sn0/addrs.h>
+#include <asm/sn/sn0/hubpi.h>
+#include <asm/sn/sn0/hubmd.h>
+#include <asm/sn/sn0/hubio.h>
+#include <asm/sn/sn0/hubni.h>
+//#include <asm/sn/sn0/hubcore.h>
+
+/* Translation of uncached attributes */
+#define UATTR_HSPEC 0
+#define UATTR_IO 1
+#define UATTR_MSPEC 2
+#define UATTR_UNCAC 3
+
+#endif /* _ASM_SN_SN0_HUB_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
new file mode 100644
index 000000000..5998b13e9
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -0,0 +1,972 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubio.h>, Revision 1.80.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SGI_SN_SN0_HUBIO_H
+#define _ASM_SGI_SN_SN0_HUBIO_H
+
+/*
+ * Hub I/O interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ * In general, the longer software name should be used when available.
+ */
+
+/*
+ * Slightly friendlier names for some common registers.
+ * The hardware definitions follow.
+ */
+#define IIO_WIDGET IIO_WID /* Widget identification */
+#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */
+#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */
+#define IIO_WIDGET_TOUT IIO_WRTO /* Widget request timeout */
+#define IIO_WIDGET_FLUSH IIO_WTFR /* Widget target flush */
+#define IIO_PROTECT IIO_ILAPR /* IO interface protection */
+#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */
+#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */
+#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */
+#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */
+#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */
+#define IIO_LLP_LOG IIO_ILLR /* LLP log */
+#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout*/
+#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */
+#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */
+#define IIO_BTE_CRB_CNT IIO_IBCN /* IO BTE CRB count */
+
+#define IIO_LLP_CSR_IS_UP 0x00002000
+#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000
+#define IIO_LLP_CSR_LLP_STAT_SHFT 12
+
+/* key to IIO_PROTECT_OVRRD */
+#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */
+
+/* BTE register names */
+#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */
+#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */
+#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */
+#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */
+#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */
+#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */
+#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */
+#define IIO_BTE_OFF_1 IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */
+
+/* BTE register offsets from base */
+#define BTEOFF_STAT 0
+#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
+#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
+#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
+#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
+#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0)
+
+
+/*
+ * The following definitions use the names defined in the IO interface
+ * document for ease of reference. When possible, software should
+ * generally use the longer but clearer names defined above.
+ */
+
+#define IIO_BASE 0x400000
+#define IIO_BASE_BTE0 0x410000
+#define IIO_BASE_BTE1 0x420000
+#define IIO_BASE_PERF 0x430000
+#define IIO_PERF_CNT 0x430008
+
+#define IO_PERF_SETS 32
+
+#define IIO_WID 0x400000 /* Widget identification */
+#define IIO_WSTAT 0x400008 /* Widget status */
+#define IIO_WCR 0x400020 /* Widget control */
+
+#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */
+#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */
+#define IIO_WSTAT_TXRETRY_MASK (0x7F)
+#define IIO_WSTAT_TXRETRY_SHFT (16)
+#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+ IIO_WSTAT_TXRETRY_MASK)
+
+#define IIO_ILAPR 0x400100 /* Local Access Protection */
+#define IIO_ILAPO 0x400108 /* Protection override */
+#define IIO_IOWA 0x400110 /* outbound widget access */
+#define IIO_IIWA 0x400118 /* inbound widget access */
+#define IIO_IIDEM 0x400120 /* Inbound Device Error Mask */
+#define IIO_ILCSR 0x400128 /* LLP control and status */
+#define IIO_ILLR 0x400130 /* LLP Log */
+#define IIO_IIDSR 0x400138 /* Interrupt destination */
+
+#define IIO_IIBUSERR 0x1400208 /* Reads here cause a bus error. */
+
+/* IO Interrupt Destination Register */
+#define IIO_IIDSR_SENT_SHIFT 28
+#define IIO_IIDSR_SENT_MASK 0x10000000
+#define IIO_IIDSR_ENB_SHIFT 24
+#define IIO_IIDSR_ENB_MASK 0x01000000
+#define IIO_IIDSR_NODE_SHIFT 8
+#define IIO_IIDSR_NODE_MASK 0x0000ff00
+#define IIO_IIDSR_LVL_SHIFT 0
+#define IIO_IIDSR_LVL_MASK 0x0000003f
+
+
+/* GFX Flow Control Node/Widget Register */
+#define IIO_IGFX_0 0x400140 /* gfx node/widget register 0 */
+#define IIO_IGFX_1 0x400148 /* gfx node/widget register 1 */
+#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */
+#define IIO_IGFX_W_NUM_MASK ((1<<IIO_IGFX_W_NUM_BITS)-1)
+#define IIO_IGFX_W_NUM_SHIFT 0
+#define IIO_IGFX_N_NUM_BITS 9 /* size of node num field */
+#define IIO_IGFX_N_NUM_MASK ((1<<IIO_IGFX_N_NUM_BITS)-1)
+#define IIO_IGFX_N_NUM_SHIFT 4
+#define IIO_IGFX_P_NUM_BITS 1 /* size of processor num field */
+#define IIO_IGFX_P_NUM_MASK ((1<<IIO_IGFX_P_NUM_BITS)-1)
+#define IIO_IGFX_P_NUM_SHIFT 16
+#define IIO_IGFX_VLD_BITS 1 /* size of valid field */
+#define IIO_IGFX_VLD_MASK ((1<<IIO_IGFX_VLD_BITS)-1)
+#define IIO_IGFX_VLD_SHIFT 20
+#define IIO_IGFX_INIT(widget, node, cpu, valid) (\
+ (((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) | \
+ (((node) & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) | \
+ (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) | \
+ (((valid) & IIO_IGFX_VLD_MASK) << IIO_IGFX_VLD_SHIFT) )
+
+/* Scratch registers (not all bits available) */
+#define IIO_SCRATCH_REG0 0x400150
+#define IIO_SCRATCH_REG1 0x400158
+#define IIO_SCRATCH_MASK 0x0000000f00f11fff
+
+#define IIO_SCRATCH_BIT0_0 0x0000000800000000
+#define IIO_SCRATCH_BIT0_1 0x0000000400000000
+#define IIO_SCRATCH_BIT0_2 0x0000000200000000
+#define IIO_SCRATCH_BIT0_3 0x0000000100000000
+#define IIO_SCRATCH_BIT0_4 0x0000000000800000
+#define IIO_SCRATCH_BIT0_5 0x0000000000400000
+#define IIO_SCRATCH_BIT0_6 0x0000000000200000
+#define IIO_SCRATCH_BIT0_7 0x0000000000100000
+#define IIO_SCRATCH_BIT0_8 0x0000000000010000
+#define IIO_SCRATCH_BIT0_9 0x0000000000001000
+#define IIO_SCRATCH_BIT0_R 0x0000000000000fff
+
+/* IO Translation Table Entries */
+#define IIO_NUM_ITTES 7 /* ITTEs numbered 0..6 */
+ /* Hw manuals number them 1..7! */
+
+/*
+ * As a permanent workaround for a bug in the PI side of the hub, we've
+ * redefined big window 7 as small window 0.
+ */
+#define HUB_NUM_BIG_WINDOW IIO_NUM_ITTES - 1
+
+/*
+ * Use the top big window as a surrogate for the first small window
+ */
+#define SWIN0_BIGWIN HUB_NUM_BIG_WINDOW
+
+#define ILCSR_WARM_RESET 0x100
+/*
+ * The IO LLP control status register and widget control register
+ */
+#ifndef __ASSEMBLY__
+
+typedef union hubii_wid_u {
+ u64 wid_reg_value;
+ struct {
+ u64 wid_rsvd: 32, /* unused */
+ wid_rev_num: 4, /* revision number */
+ wid_part_num: 16, /* the widget type: hub=c101 */
+ wid_mfg_num: 11, /* Manufacturer id (IBM) */
+ wid_rsvd1: 1; /* Reserved */
+ } wid_fields_s;
+} hubii_wid_t;
+
+
+typedef union hubii_wcr_u {
+ u64 wcr_reg_value;
+ struct {
+ u64 wcr_rsvd: 41, /* unused */
+ wcr_e_thresh: 5, /* elasticity threshold */
+ wcr_dir_con: 1, /* widget direct connect */
+ wcr_f_bad_pkt: 1, /* Force bad llp pkt enable */
+ wcr_xbar_crd: 3, /* LLP crossbar credit */
+ wcr_rsvd1: 8, /* Reserved */
+ wcr_tag_mode: 1, /* Tag mode */
+ wcr_widget_id: 4; /* LLP crossbar credit */
+ } wcr_fields_s;
+} hubii_wcr_t;
+
+#define iwcr_dir_con wcr_fields_s.wcr_dir_con
+
+typedef union hubii_wstat_u {
+ u64 reg_value;
+ struct {
+ u64 rsvd1: 31,
+ crazy: 1, /* Crazy bit */
+ rsvd2: 8,
+ llp_tx_cnt: 8, /* LLP Xmit retry counter */
+ rsvd3: 6,
+ tx_max_rtry: 1, /* LLP Retry Timeout Signal */
+ rsvd4: 2,
+ xt_tail_to: 1, /* Xtalk Tail Timeout */
+ xt_crd_to: 1, /* Xtalk Credit Timeout */
+ pending: 4; /* Pending Requests */
+ } wstat_fields_s;
+} hubii_wstat_t;
+
+
+typedef union hubii_ilcsr_u {
+ u64 icsr_reg_value;
+ struct {
+ u64 icsr_rsvd: 22, /* unused */
+ icsr_max_burst: 10, /* max burst */
+ icsr_rsvd4: 6, /* reserved */
+ icsr_max_retry: 10, /* max retry */
+ icsr_rsvd3: 2, /* reserved */
+ icsr_lnk_stat: 2, /* link status */
+ icsr_bm8: 1, /* Bit mode 8 */
+ icsr_llp_en: 1, /* LLP enable bit */
+ icsr_rsvd2: 1, /* reserver */
+ icsr_wrm_reset: 1, /* Warm reset bit */
+ icsr_rsvd1: 2, /* Data ready offset */
+ icsr_null_to: 6; /* Null timeout */
+
+ } icsr_fields_s;
+} hubii_ilcsr_t;
+
+
+typedef union hubii_iowa_u {
+ u64 iowa_reg_value;
+ struct {
+ u64 iowa_rsvd: 48, /* unused */
+ iowa_wxoac: 8, /* xtalk widget access bits */
+ iowa_rsvd1: 7, /* xtalk widget access bits */
+ iowa_w0oac: 1; /* xtalk widget access bits */
+ } iowa_fields_s;
+} hubii_iowa_t;
+
+typedef union hubii_iiwa_u {
+ u64 iiwa_reg_value;
+ struct {
+ u64 iiwa_rsvd: 48, /* unused */
+ iiwa_wxiac: 8, /* hub wid access bits */
+ iiwa_rsvd1: 7, /* reserved */
+ iiwa_w0iac: 1; /* hub wid0 access */
+ } iiwa_fields_s;
+} hubii_iiwa_t;
+
+typedef union hubii_illr_u {
+ u64 illr_reg_value;
+ struct {
+ u64 illr_rsvd: 32, /* unused */
+ illr_cb_cnt: 16, /* checkbit error count */
+ illr_sn_cnt: 16; /* sequence number count */
+ } illr_fields_s;
+} hubii_illr_t;
+
+/* The structures below are defined to extract and modify the ii
+performance registers */
+
+/* io_perf_sel allows the caller to specify what tests will be
+ performed */
+typedef union io_perf_sel {
+ u64 perf_sel_reg;
+ struct {
+ u64 perf_rsvd : 48,
+ perf_icct : 8,
+ perf_ippr1 : 4,
+ perf_ippr0 : 4;
+ } perf_sel_bits;
+} io_perf_sel_t;
+
+/* io_perf_cnt is to extract the count from the hub registers. Due to
+ hardware problems there is only one counter, not two. */
+
+typedef union io_perf_cnt {
+ u64 perf_cnt;
+ struct {
+ u64 perf_rsvd1 : 32,
+ perf_rsvd2 : 12,
+ perf_cnt : 20;
+ } perf_cnt_bits;
+} io_perf_cnt_t;
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define LNK_STAT_WORKING 0x2
+
+#define IIO_LLP_CB_MAX 0xffff
+#define IIO_LLP_SN_MAX 0xffff
+
+/* IO PRB Entries */
+#define IIO_NUM_IPRBS (9)
+#define IIO_IOPRB_0 0x400198 /* PRB entry 0 */
+#define IIO_IOPRB_8 0x4001a0 /* PRB entry 8 */
+#define IIO_IOPRB_9 0x4001a8 /* PRB entry 9 */
+#define IIO_IOPRB_A 0x4001b0 /* PRB entry a */
+#define IIO_IOPRB_B 0x4001b8 /* PRB entry b */
+#define IIO_IOPRB_C 0x4001c0 /* PRB entry c */
+#define IIO_IOPRB_D 0x4001c8 /* PRB entry d */
+#define IIO_IOPRB_E 0x4001d0 /* PRB entry e */
+#define IIO_IOPRB_F 0x4001d8 /* PRB entry f */
+
+
+#define IIO_IXCC 0x4001e0 /* Crosstalk credit count timeout */
+#define IIO_IXTCC IIO_IXCC
+#define IIO_IMEM 0x4001e8 /* Miscellaneous Enable Mask */
+#define IIO_IXTT 0x4001f0 /* Crosstalk tail timeout */
+#define IIO_IECLR 0x4001f8 /* IO error clear */
+#define IIO_IBCN 0x400200 /* IO BTE CRB count */
+
+/*
+ * IIO_IMEM Register fields.
+ */
+#define IIO_IMEM_W0ESD 0x1 /* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD (1 << 4) /* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD (1 << 8) /* BTE 1 Shut down due to error */
+
+/* PIO Read address Table Entries */
+#define IIO_IPCA 0x400300 /* PRB Counter adjust */
+#define IIO_NUM_PRTES 8 /* Total number of PRB table entries */
+#define IIO_PRTE_0 0x400308 /* PIO Read address table entry 0 */
+#define IIO_PRTE(_x) (IIO_PRTE_0 + (8 * (_x)))
+#define IIO_WIDPRTE(x) IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */
+#define IIO_IPDR 0x400388 /* PIO table entry deallocation */
+#define IIO_ICDR 0x400390 /* CRB Entry Deallocation */
+#define IIO_IFDR 0x400398 /* IOQ FIFO Depth */
+#define IIO_IIAP 0x4003a0 /* IIQ Arbitration Parameters */
+#define IIO_IMMR IIO_IIAP
+#define IIO_ICMR 0x4003a8 /* CRB Management Register */
+#define IIO_ICCR 0x4003b0 /* CRB Control Register */
+#define IIO_ICTO 0x4003b8 /* CRB Time Out Register */
+#define IIO_ICTP 0x4003c0 /* CRB Time Out Prescalar */
+
+
+/*
+ * ICMR register fields
+ */
+#define IIO_ICMR_PC_VLD_SHFT 36
+#define IIO_ICMR_PC_VLD_MASK (0x7fffUL << IIO_ICMR_PC_VLD_SHFT)
+
+#define IIO_ICMR_CRB_VLD_SHFT 20
+#define IIO_ICMR_CRB_VLD_MASK (0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
+
+#define IIO_ICMR_FC_CNT_SHFT 16
+#define IIO_ICMR_FC_CNT_MASK (0xf << IIO_ICMR_FC_CNT_SHFT)
+
+#define IIO_ICMR_C_CNT_SHFT 4
+#define IIO_ICMR_C_CNT_MASK (0xf << IIO_ICMR_C_CNT_SHFT)
+
+#define IIO_ICMR_P_CNT_SHFT 0
+#define IIO_ICMR_P_CNT_MASK (0xf << IIO_ICMR_P_CNT_SHFT)
+
+#define IIO_ICMR_PRECISE (1UL << 52)
+#define IIO_ICMR_CLR_RPPD (1UL << 13)
+#define IIO_ICMR_CLR_RQPD (1UL << 12)
+
+/*
+ * IIO PIO Deallocation register field masks : (IIO_IPDR)
+ */
+#define IIO_IPDR_PND (1 << 4)
+
+/*
+ * IIO CRB deallocation register field masks: (IIO_ICDR)
+ */
+#define IIO_ICDR_PND (1 << 4)
+
+/*
+ * IIO CRB control register Fields: IIO_ICCR
+ */
+#define IIO_ICCR_PENDING (0x10000)
+#define IIO_ICCR_CMD_MASK (0xFF)
+#define IIO_ICCR_CMD_SHFT (7)
+#define IIO_ICCR_CMD_NOP (0x0) /* No Op */
+#define IIO_ICCR_CMD_WAKE (0x100) /* Reactivate CRB entry and process */
+#define IIO_ICCR_CMD_TIMEOUT (0x200) /* Make CRB timeout & mark invalid */
+#define IIO_ICCR_CMD_EJECT (0x400) /* Contents of entry written to memory
+ * via a WB
+ */
+#define IIO_ICCR_CMD_FLUSH (0x800)
+
+/*
+ * CRB manipulation macros
+ * The CRB macros are slightly complicated, since there are up to
+ * four registers associated with each CRB entry.
+ */
+#define IIO_NUM_CRBS 15 /* Number of CRBs */
+#define IIO_NUM_NORMAL_CRBS 12 /* Number of regular CRB entries */
+#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */
+#define IIO_ICRB_OFFSET 8
+#define IIO_ICRB_0 0x400400
+/* XXX - This is now tuneable:
+ #define IIO_FIRST_PC_ENTRY 12
+ */
+
+#define IIO_ICRB_A(_x) (IIO_ICRB_0 + (4 * IIO_ICRB_OFFSET * (_x)))
+#define IIO_ICRB_B(_x) (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET)
+#define IIO_ICRB_C(_x) (IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET)
+#define IIO_ICRB_D(_x) (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET)
+
+/* XXX - IBUE register coming for Hub 2 */
+
+/*
+ *
+ * CRB Register description.
+ *
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ *
+ * Many of the fields in CRB are status bits used by hardware
+ * for implementation of the protocol. It's very dangerous to
+ * mess around with the CRB registers.
+ *
+ * It's OK to read the CRB registers and try to make sense out of the
+ * fields in CRB.
+ *
+ * Updating CRB requires all activities in Hub IIO to be quiesced.
+ * otherwise, a write to CRB could corrupt other CRB entries.
+ * CRBs are here only as a back door peek to hub IIO's status.
+ * Quiescing implies no dmas no PIOs
+ * either directly from the cpu or from sn0net.
+ * this is not something that can be done easily. So, AVOID updating
+ * CRBs.
+ */
+
+/*
+ * Fields in CRB Register A
+ */
+#ifndef __ASSEMBLY__
+typedef union icrba_u {
+ u64 reg_value;
+ struct {
+ u64 resvd: 6,
+ stall_bte0: 1, /* Stall BTE 0 */
+ stall_bte1: 1, /* Stall BTE 1 */
+ error: 1, /* CRB has an error */
+ ecode: 3, /* Error Code */
+ lnetuce: 1, /* SN0net Uncorrectable error */
+ mark: 1, /* CRB Has been marked */
+ xerr: 1, /* Error bit set in xtalk header */
+ sidn: 4, /* SIDN field from xtalk */
+ tnum: 5, /* TNUM field in xtalk */
+ addr: 38, /* Address of request */
+ valid: 1, /* Valid status */
+ iow: 1; /* IO Write operation */
+ } icrba_fields_s;
+} icrba_t;
+
+/* This is an alternate typedef for the HUB1 CRB A in order to allow
+ runtime selection of the format based on the REV_ID field of the
+ NI_STATUS_REV_ID register. */
+typedef union h1_icrba_u {
+ u64 reg_value;
+
+ struct {
+ u64 resvd: 6,
+ unused: 1, /* Unused but RW!! */
+ error: 1, /* CRB has an error */
+ ecode: 4, /* Error Code */
+ lnetuce: 1, /* SN0net Uncorrectable error */
+ mark: 1, /* CRB Has been marked */
+ xerr: 1, /* Error bit set in xtalk header */
+ sidn: 4, /* SIDN field from xtalk */
+ tnum: 5, /* TNUM field in xtalk */
+ addr: 38, /* Address of request */
+ valid: 1, /* Valid status */
+ iow: 1; /* IO Write operation */
+ } h1_icrba_fields_s;
+} h1_icrba_t;
+
+/* XXX - Is this still right? Check the spec. */
+#define ICRBN_A_CERR_SHFT 54
+#define ICRBN_A_ERR_MASK 0x3ff
+
+#endif /* !__ASSEMBLY__ */
+
+#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */
+
+/*
+ * values for "ecode" field
+ */
+#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */
+#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */
+#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access
+ * e.g. WINV to a Read only line.
+ */
+#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */
+#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */
+#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */
+#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */
+#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */
+
+
+
+/*
+ * Fields in CRB Register B
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbb_u {
+ u64 reg_value;
+ struct {
+ u64 rsvd1: 5,
+ btenum: 1, /* BTE to which entry belongs to */
+ cohtrans: 1, /* Coherent transaction */
+ xtsize: 2, /* Xtalk operation size
+ * 0: Double Word
+ * 1: 32 Bytes.
+ * 2: 128 Bytes,
+ * 3: Reserved.
+ */
+ srcnode: 9, /* Source Node ID */
+ srcinit: 2, /* Source Initiator:
+ * See below for field values.
+ */
+ useold: 1, /* Use OLD command for processing */
+ imsgtype: 2, /* Incoming message type
+ * see below for field values
+ */
+ imsg: 8, /* Incoming message */
+ initator: 3, /* Initiator of original request
+ * See below for field values.
+ */
+ reqtype: 5, /* Identifies type of request
+ * See below for field values.
+ */
+ rsvd2: 7,
+ ackcnt: 11, /* Invalidate ack count */
+ resp: 1, /* data response given to processor */
+ ack: 1, /* indicates data ack received */
+ hold: 1, /* entry is gathering inval acks */
+ wb_pend:1, /* waiting for writeback to complete */
+ intvn: 1, /* Intervention */
+ stall_ib: 1, /* Stall Ibuf (from crosstalk) */
+ stall_intr: 1; /* Stall internal interrupts */
+ } icrbb_field_s;
+} icrbb_t;
+
+/* This is an alternate typedef for the HUB1 CRB B in order to allow
+ runtime selection of the format based on the REV_ID field of the
+ NI_STATUS_REV_ID register. */
+typedef union h1_icrbb_u {
+ u64 reg_value;
+ struct {
+ u64 rsvd1: 5,
+ btenum: 1, /* BTE to which entry belongs to */
+ cohtrans: 1, /* Coherent transaction */
+ xtsize: 2, /* Xtalk operation size
+ * 0: Double Word
+ * 1: 32 Bytes.
+ * 2: 128 Bytes,
+ * 3: Reserved.
+ */
+ srcnode: 9, /* Source Node ID */
+ srcinit: 2, /* Source Initiator:
+ * See below for field values.
+ */
+ useold: 1, /* Use OLD command for processing */
+ imsgtype: 2, /* Incoming message type
+ * see below for field values
+ */
+ imsg: 8, /* Incoming message */
+ initator: 3, /* Initiator of original request
+ * See below for field values.
+ */
+ rsvd2: 1,
+ pcache: 1, /* entry belongs to partial cache */
+ reqtype: 5, /* Identifies type of request
+ * See below for field values.
+ */
+ stl_ib: 1, /* stall Ibus coming from xtalk */
+ stl_intr: 1, /* Stall internal interrupts */
+ stl_bte0: 1, /* Stall BTE 0 */
+ stl_bte1: 1, /* Stall BTE 1 */
+ intrvn: 1, /* Req was target of intervention */
+ ackcnt: 11, /* Invalidate ack count */
+ resp: 1, /* data response given to processor */
+ ack: 1, /* indicates data ack received */
+ hold: 1, /* entry is gathering inval acks */
+ wb_pend:1, /* waiting for writeback to complete */
+ sleep: 1, /* xtalk req sleeping till IO-sync */
+ pnd_reply: 1, /* replies not issed due to IOQ full */
+ pnd_req: 1; /* reqs not issued due to IOQ full */
+ } h1_icrbb_field_s;
+} h1_icrbb_t;
+
+
+#define b_imsgtype icrbb_field_s.imsgtype
+#define b_btenum icrbb_field_s.btenum
+#define b_cohtrans icrbb_field_s.cohtrans
+#define b_xtsize icrbb_field_s.xtsize
+#define b_srcnode icrbb_field_s.srcnode
+#define b_srcinit icrbb_field_s.srcinit
+#define b_imsgtype icrbb_field_s.imsgtype
+#define b_imsg icrbb_field_s.imsg
+#define b_initiator icrbb_field_s.initiator
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for field xtsize
+ */
+#define IIO_ICRB_XTSIZE_DW 0 /* Xtalk operation size is 8 bytes */
+#define IIO_ICRB_XTSIZE_32 1 /* Xtalk operation size is 32 bytes */
+#define IIO_ICRB_XTSIZE_128 2 /* Xtalk operation size is 128 bytes */
+
+/*
+ * values for field srcinit
+ */
+#define IIO_ICRB_PROC0 0 /* Source of request is Proc 0 */
+#define IIO_ICRB_PROC1 1 /* Source of request is Proc 1 */
+#define IIO_ICRB_GB_REQ 2 /* Source is Guaranteed BW request */
+#define IIO_ICRB_IO_REQ 3 /* Source is Normal IO request */
+
+/*
+ * Values for field imsgtype
+ */
+#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Meessage from Xtalk */
+#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */
+#define IIO_ICRB_IMSGT_SN0NET 2 /* Incoming message from SN0 net */
+#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */
+
+/*
+ * values for field initiator.
+ */
+#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */
+#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */
+#define IIO_ICRB_INIT_SN0NET 0x2 /* Message originated in SN0net */
+#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */
+#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */
+
+/*
+ * Values for field reqtype.
+ */
+/* XXX - Need to fix this for Hub 2 */
+#define IIO_ICRB_REQ_DWRD 0 /* Request type double word */
+#define IIO_ICRB_REQ_QCLRD 1 /* Request is Qrtr Caceh line Rd */
+#define IIO_ICRB_REQ_BLKRD 2 /* Request is block read */
+#define IIO_ICRB_REQ_RSHU 6 /* Request is BTE block read */
+#define IIO_ICRB_REQ_REXU 7 /* request is BTE Excl Read */
+#define IIO_ICRB_REQ_RDEX 8 /* Request is Read Exclusive */
+#define IIO_ICRB_REQ_WINC 9 /* Request is Write Invalidate */
+#define IIO_ICRB_REQ_BWINV 10 /* Request is BTE Winv */
+#define IIO_ICRB_REQ_PIORD 11 /* Request is PIO read */
+#define IIO_ICRB_REQ_PIOWR 12 /* Request is PIO Write */
+#define IIO_ICRB_REQ_PRDM 13 /* Request is Fetch&Op */
+#define IIO_ICRB_REQ_PWRM 14 /* Request is Store &Op */
+#define IIO_ICRB_REQ_PTPWR 15 /* Request is Peer to peer */
+#define IIO_ICRB_REQ_WB 16 /* Request is Write back */
+#define IIO_ICRB_REQ_DEX 17 /* Retained DEX Cache line */
+
+/*
+ * Fields in CRB Register C
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union icrbc_s {
+ u64 reg_value;
+ struct {
+ u64 rsvd: 6,
+ sleep: 1,
+ pricnt: 4, /* Priority count sent with Read req */
+ pripsc: 4, /* Priority Pre scalar */
+ bteop: 1, /* BTE Operation */
+ push_be: 34, /* Push address Byte enable
+ * Holds push addr, if CRB is for BTE
+ * If CRB belongs to Partial cache,
+ * this contains byte enables bits
+ * ([47:46] = 0)
+ */
+ suppl: 11, /* Supplemental field */
+ barrop: 1, /* Barrier Op bit set in xtalk req */
+ doresp: 1, /* Xtalk req needs a response */
+ gbr: 1; /* GBR bit set in xtalk packet */
+ } icrbc_field_s;
+} icrbc_t;
+
+#define c_pricnt icrbc_field_s.pricnt
+#define c_pripsc icrbc_field_s.pripsc
+#define c_bteop icrbc_field_s.bteop
+#define c_bteaddr icrbc_field_s.push_be /* push_be field has 2 names */
+#define c_benable icrbc_field_s.push_be /* push_be field has 2 names */
+#define c_suppl icrbc_field_s.suppl
+#define c_barrop icrbc_field_s.barrop
+#define c_doresp icrbc_field_s.doresp
+#define c_gbr icrbc_field_s.gbr
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Fields in CRB Register D
+ */
+
+#ifndef __ASSEMBLY__
+typedef union icrbd_s {
+ u64 reg_value;
+ struct {
+ u64 rsvd: 38,
+ toutvld: 1, /* Timeout in progress for this CRB */
+ ctxtvld: 1, /* Context field below is valid */
+ rsvd2: 1,
+ context: 15, /* Bit vector:
+ * Has a bit set for each CRB entry
+ * which needs to be deallocated
+ * before this CRB entry is processed.
+ * Set only for barrier operations.
+ */
+ timeout: 8; /* Timeout Upper 8 bits */
+ } icrbd_field_s;
+} icrbd_t;
+
+#define icrbd_toutvld icrbd_field_s.toutvld
+#define icrbd_ctxtvld icrbd_field_s.ctxtvld
+#define icrbd_context icrbd_field_s.context
+
+
+typedef union hubii_ifdr_u {
+ u64 hi_ifdr_value;
+ struct {
+ u64 ifdr_rsvd: 49,
+ ifdr_maxrp: 7,
+ ifdr_rsvd1: 1,
+ ifdr_maxrq: 7;
+ } hi_ifdr_fields;
+} hubii_ifdr_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Hardware designed names for the BTE control registers.
+ */
+#define IIO_IBLS_0 0x410000 /* BTE length/status 0 */
+#define IIO_IBSA_0 0x410008 /* BTE source address 0 */
+#define IIO_IBDA_0 0x410010 /* BTE destination address 0 */
+#define IIO_IBCT_0 0x410018 /* BTE control/terminate 0 */
+#define IIO_IBNA_0 0x410020 /* BTE notification address 0 */
+#define IIO_IBNR_0 IIO_IBNA_0
+#define IIO_IBIA_0 0x410028 /* BTE interrupt address 0 */
+
+#define IIO_IBLS_1 0x420000 /* BTE length/status 1 */
+#define IIO_IBSA_1 0x420008 /* BTE source address 1 */
+#define IIO_IBDA_1 0x420010 /* BTE destination address 1 */
+#define IIO_IBCT_1 0x420018 /* BTE control/terminate 1 */
+#define IIO_IBNA_1 0x420020 /* BTE notification address 1 */
+#define IIO_IBNR_1 IIO_IBNA_1
+#define IIO_IBIA_1 0x420028 /* BTE interrupt address 1 */
+
+/*
+ * More miscellaneous registers
+ */
+#define IIO_IPCR 0x430000 /* Performance Control */
+#define IIO_IPPR 0x430008 /* Performance Profiling */
+
+/*
+ * IO Error Clear register bit field definitions
+ */
+#define IECLR_BTE1 (1 << 18) /* clear bte error 1 ??? */
+#define IECLR_BTE0 (1 << 17) /* clear bte error 0 ??? */
+#define IECLR_CRAZY (1 << 16) /* clear crazy bit in wstat reg */
+#define IECLR_PRB_F (1 << 15) /* clear err bit in PRB_F reg */
+#define IECLR_PRB_E (1 << 14) /* clear err bit in PRB_E reg */
+#define IECLR_PRB_D (1 << 13) /* clear err bit in PRB_D reg */
+#define IECLR_PRB_C (1 << 12) /* clear err bit in PRB_C reg */
+#define IECLR_PRB_B (1 << 11) /* clear err bit in PRB_B reg */
+#define IECLR_PRB_A (1 << 10) /* clear err bit in PRB_A reg */
+#define IECLR_PRB_9 (1 << 9) /* clear err bit in PRB_9 reg */
+#define IECLR_PRB_8 (1 << 8) /* clear err bit in PRB_8 reg */
+#define IECLR_PRB_0 (1 << 0) /* clear err bit in PRB_0 reg */
+
+/*
+ * IO PIO Read Table Entry format
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union iprte_a {
+ u64 entry;
+ struct {
+ u64 rsvd1 : 7, /* Reserved field */
+ valid : 1, /* Maps to a timeout entry */
+ rsvd2 : 1,
+ srcnode : 9, /* Node which did this PIO */
+ initiator : 2, /* If T5A or T5B or IO */
+ rsvd3 : 3,
+ addr : 38, /* Physical address of PIO */
+ rsvd4 : 3;
+ } iprte_fields;
+} iprte_a_t;
+
+#define iprte_valid iprte_fields.valid
+#define iprte_timeout iprte_fields.timeout
+#define iprte_srcnode iprte_fields.srcnode
+#define iprte_init iprte_fields.initiator
+#define iprte_addr iprte_fields.addr
+
+#endif /* !__ASSEMBLY__ */
+
+#define IPRTE_ADDRSHFT 3
+
+/*
+ * Hub IIO PRB Register format.
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * Note: Fields bnakctr, anakctr, xtalkctrmode, ovflow fields are
+ * "Status" fields, and should only be used in case of clean up after errors.
+ */
+
+typedef union iprb_u {
+ u64 reg_value;
+ struct {
+ u64 rsvd1: 15,
+ error: 1, /* Widget rcvd wr resp pkt w/ error */
+ ovflow: 5, /* Overflow count. perf measurement */
+ fire_and_forget: 1, /* Launch Write without response */
+ mode: 2, /* Widget operation Mode */
+ rsvd2: 2,
+ bnakctr: 14,
+ rsvd3: 2,
+ anakctr: 14,
+ xtalkctr: 8;
+ } iprb_fields_s;
+} iprb_t;
+
+#define iprb_regval reg_value
+
+#define iprb_error iprb_fields_s.error
+#define iprb_ovflow iprb_fields_s.ovflow
+#define iprb_ff iprb_fields_s.fire_and_forget
+#define iprb_mode iprb_fields_s.mode
+#define iprb_bnakctr iprb_fields_s.bnakctr
+#define iprb_anakctr iprb_fields_s.anakctr
+#define iprb_xtalkctr iprb_fields_s.xtalkctr
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for mode field in iprb_t.
+ * For details of the meanings of NAK and Accept, refer the PIO flow
+ * document
+ */
+#define IPRB_MODE_NORMAL (0)
+#define IPRB_MODE_COLLECT_A (1) /* PRB in collect A mode */
+#define IPRB_MODE_SERVICE_A (2) /* NAK B and Accept A */
+#define IPRB_MODE_SERVICE_B (3) /* NAK A and Accept B */
+
+/*
+ * IO CRB entry C_A to E_A : Partial (cache) CRBS
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbp_a {
+ u64 ip_reg; /* the entire register value */
+ struct {
+ u64 error: 1, /* 63, error occurred */
+ ln_uce: 1, /* 62: uncorrectable memory */
+ ln_ae: 1, /* 61: protection violation */
+ ln_werr:1, /* 60: write access error */
+ ln_aerr:1, /* 59: sn0net: Address error */
+ ln_perr:1, /* 58: sn0net: poison error */
+ timeout:1, /* 57: CRB timed out */
+ l_bdpkt:1, /* 56: truncated pkt on sn0net */
+ c_bdpkt:1, /* 55: truncated pkt on xtalk */
+ c_err: 1, /* 54: incoming xtalk req, err set*/
+ rsvd1: 12, /* 53-42: reserved */
+ valid: 1, /* 41: Valid status */
+ sidn: 4, /* 40-37: SIDN field of xtalk rqst */
+ tnum: 5, /* 36-32: TNUM of xtalk request */
+ bo: 1, /* 31: barrier op set in xtalk rqst*/
+ resprqd:1, /* 30: xtalk rqst requires response*/
+ gbr: 1, /* 29: gbr bit set in xtalk rqst */
+ size: 2, /* 28-27: size of xtalk request */
+ excl: 4, /* 26-23: exclusive bit(s) */
+ stall: 3, /* 22-20: stall (xtalk, bte 0/1) */
+ intvn: 1, /* 19: rqst target of intervention*/
+ resp: 1, /* 18: Data response given to t5 */
+ ack: 1, /* 17: Data ack received. */
+ hold: 1, /* 16: crb gathering invalidate acks*/
+ wb: 1, /* 15: writeback pending. */
+ ack_cnt:11, /* 14-04: counter of invalidate acks*/
+ tscaler:4; /* 03-00: Timeout prescaler */
+ } ip_fmt;
+} icrbp_a_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * A couple of defines to go with the above structure.
+ */
+#define ICRBP_A_CERR_SHFT 54
+#define ICRBP_A_ERR_MASK 0x3ff
+
+#ifndef __ASSEMBLY__
+typedef union hubii_idsr {
+ u64 iin_reg;
+ struct {
+ u64 rsvd1 : 35,
+ isent : 1,
+ rsvd2 : 3,
+ ienable: 1,
+ rsvd : 7,
+ node : 9,
+ rsvd4 : 1,
+ level : 7;
+ } iin_fmt;
+} hubii_idsr_t;
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * IO BTE Length/Status (IIO_IBLS) register bit field definitions
+ */
+#define IBLS_BUSY (0x1 << 20)
+#define IBLS_ERROR_SHFT 16
+#define IBLS_ERROR (0x1 << IBLS_ERROR_SHFT)
+#define IBLS_LENGTH_MASK 0xffff
+
+/*
+ * IO BTE Control/Terminate register (IBCT) register bit field definitions
+ */
+#define IBCT_POISON (0x1 << 8)
+#define IBCT_NOTIFY (0x1 << 4)
+#define IBCT_ZFIL_MODE (0x1 << 0)
+
+/*
+ * IO BTE Interrupt Address Register (IBIA) register bit field definitions
+ */
+#define IBIA_LEVEL_SHFT 16
+#define IBIA_LEVEL_MASK (0x7f << IBIA_LEVEL_SHFT)
+#define IBIA_NODE_ID_SHFT 0
+#define IBIA_NODE_ID_MASK (0x1ff)
+
+/*
+ * Miscellaneous hub constants
+ */
+
+/* Number of widgets supported by hub */
+#define HUB_NUM_WIDGET 9
+#define HUB_WIDGET_ID_MIN 0x8
+#define HUB_WIDGET_ID_MAX 0xf
+
+#define HUB_WIDGET_PART_NUM 0xc101
+#define MAX_HUBS_PER_XBOW 2
+
+/*
+ * Get a hub's widget id from widget control register
+ */
+#define IIO_WCR_WID_GET(nasid) (REMOTE_HUB_L(nasid, III_WCR) & 0xf)
+#define IIO_WST_ERROR_MASK (UINT64_CAST 1 << 32) /* Widget status error */
+
+/*
+ * Number of credits Hub widget has while sending req/response to
+ * xbow.
+ * Value of 3 is required by Xbow 1.1
+ * We may be able to increase this to 4 with Xbow 1.2.
+ */
+#define HUBII_XBOW_CREDIT 3
+#define HUBII_XBOW_REV2_CREDIT 4
+
+#endif /* _ASM_SGI_SN_SN0_HUBIO_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubmd.h b/arch/mips/include/asm/sn/sn0/hubmd.h
new file mode 100644
index 000000000..305d002be
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubmd.h
@@ -0,0 +1,789 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubmd.h>, revision 1.59.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_HUBMD_H
+#define _ASM_SN_SN0_HUBMD_H
+
+
+/*
+ * Hub Memory/Directory interface registers
+ */
+#define CACHE_SLINE_SIZE 128 /* Secondary cache line size on SN0 */
+
+#define MAX_REGIONS 64
+
+/* Hardware page size and shift */
+
+#define MD_PAGE_SIZE 4096 /* Page size in bytes */
+#define MD_PAGE_NUM_SHFT 12 /* Address to page number shift */
+
+/* Register offsets from LOCAL_HUB or REMOTE_HUB */
+
+#define MD_BASE 0x200000
+#define MD_BASE_PERF 0x210000
+#define MD_BASE_JUNK 0x220000
+
+#define MD_IO_PROTECT 0x200000 /* MD and core register protection */
+#define MD_IO_PROT_OVRRD 0x200008 /* Clear my bit in MD_IO_PROTECT */
+#define MD_HSPEC_PROTECT 0x200010 /* BDDIR, LBOOT, RBOOT protection */
+#define MD_MEMORY_CONFIG 0x200018 /* Memory/Directory DIMM control */
+#define MD_REFRESH_CONTROL 0x200020 /* Memory/Directory refresh ctrl */
+#define MD_FANDOP_CAC_STAT 0x200028 /* Fetch-and-op cache status */
+#define MD_MIG_DIFF_THRESH 0x200030 /* Page migr. count diff thresh. */
+#define MD_MIG_VALUE_THRESH 0x200038 /* Page migr. count abs. thresh. */
+#define MD_MIG_CANDIDATE 0x200040 /* Latest page migration candidate */
+#define MD_MIG_CANDIDATE_CLR 0x200048 /* Clear page migration candidate */
+#define MD_DIR_ERROR 0x200050 /* Directory DIMM error */
+#define MD_DIR_ERROR_CLR 0x200058 /* Directory DIMM error clear */
+#define MD_PROTOCOL_ERROR 0x200060 /* Directory protocol error */
+#define MD_PROTOCOL_ERROR_CLR 0x200068 /* Directory protocol error clear */
+#define MD_MEM_ERROR 0x200070 /* Memory DIMM error */
+#define MD_MEM_ERROR_CLR 0x200078 /* Memory DIMM error clear */
+#define MD_MISC_ERROR 0x200080 /* Miscellaneous MD error */
+#define MD_MISC_ERROR_CLR 0x200088 /* Miscellaneous MD error clear */
+#define MD_MEM_DIMM_INIT 0x200090 /* Memory DIMM mode initization. */
+#define MD_DIR_DIMM_INIT 0x200098 /* Directory DIMM mode init. */
+#define MD_MOQ_SIZE 0x2000a0 /* MD outgoing queue size */
+#define MD_MLAN_CTL 0x2000a8 /* NIC (Microlan) control register */
+
+#define MD_PERF_SEL 0x210000 /* Select perf monitor events */
+#define MD_PERF_CNT0 0x210010 /* Performance counter 0 */
+#define MD_PERF_CNT1 0x210018 /* Performance counter 1 */
+#define MD_PERF_CNT2 0x210020 /* Performance counter 2 */
+#define MD_PERF_CNT3 0x210028 /* Performance counter 3 */
+#define MD_PERF_CNT4 0x210030 /* Performance counter 4 */
+#define MD_PERF_CNT5 0x210038 /* Performance counter 5 */
+
+#define MD_UREG0_0 0x220000 /* uController/UART 0 register */
+#define MD_UREG0_1 0x220008 /* uController/UART 0 register */
+#define MD_UREG0_2 0x220010 /* uController/UART 0 register */
+#define MD_UREG0_3 0x220018 /* uController/UART 0 register */
+#define MD_UREG0_4 0x220020 /* uController/UART 0 register */
+#define MD_UREG0_5 0x220028 /* uController/UART 0 register */
+#define MD_UREG0_6 0x220030 /* uController/UART 0 register */
+#define MD_UREG0_7 0x220038 /* uController/UART 0 register */
+
+#define MD_SLOTID_USTAT 0x220048 /* Hub slot ID & UART/uCtlr status */
+#define MD_LED0 0x220050 /* Eight-bit LED for CPU A */
+#define MD_LED1 0x220058 /* Eight-bit LED for CPU B */
+
+#define MD_UREG1_0 0x220080 /* uController/UART 1 register */
+#define MD_UREG1_1 0x220088 /* uController/UART 1 register */
+#define MD_UREG1_2 0x220090 /* uController/UART 1 register */
+#define MD_UREG1_3 0x220098 /* uController/UART 1 register */
+#define MD_UREG1_4 0x2200a0 /* uController/UART 1 register */
+#define MD_UREG1_5 0x2200a8 /* uController/UART 1 register */
+#define MD_UREG1_6 0x2200b0 /* uController/UART 1 register */
+#define MD_UREG1_7 0x2200b8 /* uController/UART 1 register */
+#define MD_UREG1_8 0x2200c0 /* uController/UART 1 register */
+#define MD_UREG1_9 0x2200c8 /* uController/UART 1 register */
+#define MD_UREG1_10 0x2200d0 /* uController/UART 1 register */
+#define MD_UREG1_11 0x2200d8 /* uController/UART 1 register */
+#define MD_UREG1_12 0x2200e0 /* uController/UART 1 register */
+#define MD_UREG1_13 0x2200e8 /* uController/UART 1 register */
+#define MD_UREG1_14 0x2200f0 /* uController/UART 1 register */
+#define MD_UREG1_15 0x2200f8 /* uController/UART 1 register */
+
+#ifdef CONFIG_SGI_SN_N_MODE
+#define MD_MEM_BANKS 4 /* 4 banks of memory max in N mode */
+#else
+#define MD_MEM_BANKS 8 /* 8 banks of memory max in M mode */
+#endif
+
+/*
+ * MD_MEMORY_CONFIG fields
+ *
+ * MD_SIZE_xxx are useful for representing the size of a SIMM or bank
+ * (SIMM pair). They correspond to the values needed for the bit
+ * triplets (MMC_BANK_MASK) in the MD_MEMORY_CONFIG register for bank size.
+ * Bits not used by the MD are used by software.
+ */
+
+#define MD_SIZE_EMPTY 0 /* Valid in MEMORY_CONFIG */
+#define MD_SIZE_8MB 1
+#define MD_SIZE_16MB 2
+#define MD_SIZE_32MB 3 /* Broken in Hub 1 */
+#define MD_SIZE_64MB 4 /* Valid in MEMORY_CONFIG */
+#define MD_SIZE_128MB 5 /* Valid in MEMORY_CONFIG */
+#define MD_SIZE_256MB 6
+#define MD_SIZE_512MB 7 /* Valid in MEMORY_CONFIG */
+#define MD_SIZE_1GB 8
+#define MD_SIZE_2GB 9
+#define MD_SIZE_4GB 10
+
+#define MD_SIZE_BYTES(size) ((size) == 0 ? 0 : 0x400000L << (size))
+#define MD_SIZE_MBYTES(size) ((size) == 0 ? 0 : 4 << (size))
+
+#define MMC_FPROM_CYC_SHFT 49 /* Have to use UINT64_CAST, instead */
+#define MMC_FPROM_CYC_MASK (UINT64_CAST 31 << 49) /* of 'L' suffix, */
+#define MMC_FPROM_WR_SHFT 44 /* for assembler */
+#define MMC_FPROM_WR_MASK (UINT64_CAST 31 << 44)
+#define MMC_UCTLR_CYC_SHFT 39
+#define MMC_UCTLR_CYC_MASK (UINT64_CAST 31 << 39)
+#define MMC_UCTLR_WR_SHFT 34
+#define MMC_UCTLR_WR_MASK (UINT64_CAST 31 << 34)
+#define MMC_DIMM0_SEL_SHFT 32
+#define MMC_DIMM0_SEL_MASK (UINT64_CAST 3 << 32)
+#define MMC_IO_PROT_EN_SHFT 31
+#define MMC_IO_PROT_EN_MASK (UINT64_CAST 1 << 31)
+#define MMC_IO_PROT (UINT64_CAST 1 << 31)
+#define MMC_ARB_MLSS_SHFT 30
+#define MMC_ARB_MLSS_MASK (UINT64_CAST 1 << 30)
+#define MMC_ARB_MLSS (UINT64_CAST 1 << 30)
+#define MMC_IGNORE_ECC_SHFT 29
+#define MMC_IGNORE_ECC_MASK (UINT64_CAST 1 << 29)
+#define MMC_IGNORE_ECC (UINT64_CAST 1 << 29)
+#define MMC_DIR_PREMIUM_SHFT 28
+#define MMC_DIR_PREMIUM_MASK (UINT64_CAST 1 << 28)
+#define MMC_DIR_PREMIUM (UINT64_CAST 1 << 28)
+#define MMC_REPLY_GUAR_SHFT 24
+#define MMC_REPLY_GUAR_MASK (UINT64_CAST 15 << 24)
+#define MMC_BANK_SHFT(_b) ((_b) * 3)
+#define MMC_BANK_MASK(_b) (UINT64_CAST 7 << MMC_BANK_SHFT(_b))
+#define MMC_BANK_ALL_MASK 0xffffff
+#define MMC_RESET_DEFAULTS (UINT64_CAST 0x0f << MMC_FPROM_CYC_SHFT | \
+ UINT64_CAST 0x07 << MMC_FPROM_WR_SHFT | \
+ UINT64_CAST 0x1f << MMC_UCTLR_CYC_SHFT | \
+ UINT64_CAST 0x0f << MMC_UCTLR_WR_SHFT | \
+ MMC_IGNORE_ECC | MMC_DIR_PREMIUM | \
+ UINT64_CAST 0x0f << MMC_REPLY_GUAR_SHFT | \
+ MMC_BANK_ALL_MASK)
+
+/* MD_REFRESH_CONTROL fields */
+
+#define MRC_ENABLE_SHFT 63
+#define MRC_ENABLE_MASK (UINT64_CAST 1 << 63)
+#define MRC_ENABLE (UINT64_CAST 1 << 63)
+#define MRC_COUNTER_SHFT 12
+#define MRC_COUNTER_MASK (UINT64_CAST 0xfff << 12)
+#define MRC_CNT_THRESH_MASK 0xfff
+#define MRC_RESET_DEFAULTS (UINT64_CAST 0x400)
+
+/* MD_MEM_DIMM_INIT and MD_DIR_DIMM_INIT fields */
+
+#define MDI_SELECT_SHFT 32
+#define MDI_SELECT_MASK (UINT64_CAST 0x0f << 32)
+#define MDI_DIMM_MODE_MASK (UINT64_CAST 0xfff)
+
+/* MD_MOQ_SIZE fields */
+
+#define MMS_RP_SIZE_SHFT 8
+#define MMS_RP_SIZE_MASK (UINT64_CAST 0x3f << 8)
+#define MMS_RQ_SIZE_SHFT 0
+#define MMS_RQ_SIZE_MASK (UINT64_CAST 0x1f)
+#define MMS_RESET_DEFAULTS (0x32 << 8 | 0x12)
+
+/* MD_FANDOP_CAC_STAT fields */
+
+#define MFC_VALID_SHFT 63
+#define MFC_VALID_MASK (UINT64_CAST 1 << 63)
+#define MFC_VALID (UINT64_CAST 1 << 63)
+#define MFC_ADDR_SHFT 6
+#define MFC_ADDR_MASK (UINT64_CAST 0x3ffffff)
+
+/* MD_MLAN_CTL fields */
+
+#define MLAN_PHI1_SHFT 27
+#define MLAN_PHI1_MASK (UINT64_CAST 0x7f << 27)
+#define MLAN_PHI0_SHFT 20
+#define MLAN_PHI0_MASK (UINT64_CAST 0x7f << 27)
+#define MLAN_PULSE_SHFT 10
+#define MLAN_PULSE_MASK (UINT64_CAST 0x3ff << 10)
+#define MLAN_SAMPLE_SHFT 2
+#define MLAN_SAMPLE_MASK (UINT64_CAST 0xff << 2)
+#define MLAN_DONE_SHFT 1
+#define MLAN_DONE_MASK 2
+#define MLAN_DONE (UINT64_CAST 0x02)
+#define MLAN_RD_DATA (UINT64_CAST 0x01)
+#define MLAN_RESET_DEFAULTS (UINT64_CAST 0x31 << MLAN_PHI1_SHFT | \
+ UINT64_CAST 0x31 << MLAN_PHI0_SHFT)
+
+/* MD_SLOTID_USTAT bit definitions */
+
+#define MSU_CORECLK_TST_SHFT 7 /* You don't wanna know */
+#define MSU_CORECLK_TST_MASK (UINT64_CAST 1 << 7)
+#define MSU_CORECLK_TST (UINT64_CAST 1 << 7)
+#define MSU_CORECLK_SHFT 6 /* You don't wanna know */
+#define MSU_CORECLK_MASK (UINT64_CAST 1 << 6)
+#define MSU_CORECLK (UINT64_CAST 1 << 6)
+#define MSU_NETSYNC_SHFT 5 /* You don't wanna know */
+#define MSU_NETSYNC_MASK (UINT64_CAST 1 << 5)
+#define MSU_NETSYNC (UINT64_CAST 1 << 5)
+#define MSU_FPROMRDY_SHFT 4 /* Flash PROM ready bit */
+#define MSU_FPROMRDY_MASK (UINT64_CAST 1 << 4)
+#define MSU_FPROMRDY (UINT64_CAST 1 << 4)
+#define MSU_I2CINTR_SHFT 3 /* I2C interrupt bit */
+#define MSU_I2CINTR_MASK (UINT64_CAST 1 << 3)
+#define MSU_I2CINTR (UINT64_CAST 1 << 3)
+#define MSU_SLOTID_MASK 0xff
+#define MSU_SN0_SLOTID_SHFT 0 /* Slot ID */
+#define MSU_SN0_SLOTID_MASK (UINT64_CAST 7)
+#define MSU_SN00_SLOTID_SHFT 7
+#define MSU_SN00_SLOTID_MASK (UINT64_CAST 0x80)
+
+#define MSU_PIMM_PSC_SHFT 4
+#define MSU_PIMM_PSC_MASK (0xf << MSU_PIMM_PSC_SHFT)
+
+/* MD_MIG_DIFF_THRESH bit definitions */
+
+#define MD_MIG_DIFF_THRES_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_DIFF_THRES_VALID_SHFT 63
+#define MD_MIG_DIFF_THRES_VALUE_MASK (UINT64_CAST 0xfffff)
+
+/* MD_MIG_VALUE_THRESH bit definitions */
+
+#define MD_MIG_VALUE_THRES_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_VALUE_THRES_VALID_SHFT 63
+#define MD_MIG_VALUE_THRES_VALUE_MASK (UINT64_CAST 0xfffff)
+
+/* MD_MIG_CANDIDATE bit definitions */
+
+#define MD_MIG_CANDIDATE_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_CANDIDATE_VALID_SHFT 63
+#define MD_MIG_CANDIDATE_TYPE_MASK (UINT64_CAST 0x1 << 30)
+#define MD_MIG_CANDIDATE_TYPE_SHFT 30
+#define MD_MIG_CANDIDATE_OVERRUN_MASK (UINT64_CAST 0x1 << 29)
+#define MD_MIG_CANDIDATE_OVERRUN_SHFT 29
+#define MD_MIG_CANDIDATE_INITIATOR_MASK (UINT64_CAST 0x7ff << 18)
+#define MD_MIG_CANDIDATE_INITIATOR_SHFT 18
+#define MD_MIG_CANDIDATE_NODEID_MASK (UINT64_CAST 0x1ff << 20)
+#define MD_MIG_CANDIDATE_NODEID_SHFT 20
+#define MD_MIG_CANDIDATE_ADDR_MASK (UINT64_CAST 0x3ffff)
+#define MD_MIG_CANDIDATE_ADDR_SHFT 14 /* The address starts at bit 14 */
+
+/* Other MD definitions */
+
+#define MD_BANK_SHFT 29 /* log2(512 MB) */
+#define MD_BANK_MASK (UINT64_CAST 7 << 29)
+#define MD_BANK_SIZE (UINT64_CAST 1 << MD_BANK_SHFT) /* 512 MB */
+#define MD_BANK_OFFSET(_b) (UINT64_CAST (_b) << MD_BANK_SHFT)
+
+/*
+ * The following definitions cover the bit field definitions for the
+ * various MD registers. For multi-bit registers, we define both
+ * a shift amount and a mask value. By convention, if you want to
+ * isolate a field, you should mask the field and then shift it down,
+ * since this makes the masks useful without a shift.
+ */
+
+/* Directory entry states for both premium and standard SIMMs. */
+
+#define MD_DIR_SHARED (UINT64_CAST 0x0) /* 000 */
+#define MD_DIR_POISONED (UINT64_CAST 0x1) /* 001 */
+#define MD_DIR_EXCLUSIVE (UINT64_CAST 0x2) /* 010 */
+#define MD_DIR_BUSY_SHARED (UINT64_CAST 0x3) /* 011 */
+#define MD_DIR_BUSY_EXCL (UINT64_CAST 0x4) /* 100 */
+#define MD_DIR_WAIT (UINT64_CAST 0x5) /* 101 */
+#define MD_DIR_UNOWNED (UINT64_CAST 0x7) /* 111 */
+
+/*
+ * The MD_DIR_FORCE_ECC bit can be added directory entry write data
+ * to forcing the ECC to be written as-is instead of recalculated.
+ */
+
+#define MD_DIR_FORCE_ECC (UINT64_CAST 1 << 63)
+
+/*
+ * Premium SIMM directory entry shifts and masks. Each is valid only in the
+ * context(s) indicated, where A, B, and C indicate the directory entry format
+ * as shown, and low and/or high indicates which double-word of the entry.
+ *
+ * Format A: STATE = shared, FINE = 1
+ * Format B: STATE = shared, FINE = 0
+ * Format C: STATE != shared (FINE must be 0)
+ */
+
+#define MD_PDIR_MASK 0xffffffffffff /* Whole entry */
+#define MD_PDIR_ECC_SHFT 0 /* ABC low or high */
+#define MD_PDIR_ECC_MASK 0x7f
+#define MD_PDIR_PRIO_SHFT 8 /* ABC low */
+#define MD_PDIR_PRIO_MASK (0xf << 8)
+#define MD_PDIR_AX_SHFT 7 /* ABC low */
+#define MD_PDIR_AX_MASK (1 << 7)
+#define MD_PDIR_AX (1 << 7)
+#define MD_PDIR_FINE_SHFT 12 /* ABC low */
+#define MD_PDIR_FINE_MASK (1 << 12)
+#define MD_PDIR_FINE (1 << 12)
+#define MD_PDIR_OCT_SHFT 13 /* A low */
+#define MD_PDIR_OCT_MASK (7 << 13)
+#define MD_PDIR_STATE_SHFT 13 /* BC low */
+#define MD_PDIR_STATE_MASK (7 << 13)
+#define MD_PDIR_ONECNT_SHFT 16 /* BC low */
+#define MD_PDIR_ONECNT_MASK (0x3f << 16)
+#define MD_PDIR_PTR_SHFT 22 /* C low */
+#define MD_PDIR_PTR_MASK (UINT64_CAST 0x7ff << 22)
+#define MD_PDIR_VECMSB_SHFT 22 /* AB low */
+#define MD_PDIR_VECMSB_BITMASK 0x3ffffff
+#define MD_PDIR_VECMSB_BITSHFT 27
+#define MD_PDIR_VECMSB_MASK (UINT64_CAST MD_PDIR_VECMSB_BITMASK << 22)
+#define MD_PDIR_CWOFF_SHFT 7 /* C high */
+#define MD_PDIR_CWOFF_MASK (7 << 7)
+#define MD_PDIR_VECLSB_SHFT 10 /* AB high */
+#define MD_PDIR_VECLSB_BITMASK (UINT64_CAST 0x3fffffffff)
+#define MD_PDIR_VECLSB_BITSHFT 0
+#define MD_PDIR_VECLSB_MASK (MD_PDIR_VECLSB_BITMASK << 10)
+
+/*
+ * Directory initialization values
+ */
+
+#define MD_PDIR_INIT_LO (MD_DIR_UNOWNED << MD_PDIR_STATE_SHFT | \
+ MD_PDIR_AX)
+#define MD_PDIR_INIT_HI 0
+#define MD_PDIR_INIT_PROT (MD_PROT_RW << MD_PPROT_IO_SHFT | \
+ MD_PROT_RW << MD_PPROT_SHFT)
+
+/*
+ * Standard SIMM directory entry shifts and masks. Each is valid only in the
+ * context(s) indicated, where A and C indicate the directory entry format
+ * as shown, and low and/or high indicates which double-word of the entry.
+ *
+ * Format A: STATE == shared
+ * Format C: STATE != shared
+ */
+
+#define MD_SDIR_MASK 0xffff /* Whole entry */
+#define MD_SDIR_ECC_SHFT 0 /* AC low or high */
+#define MD_SDIR_ECC_MASK 0x1f
+#define MD_SDIR_PRIO_SHFT 6 /* AC low */
+#define MD_SDIR_PRIO_MASK (1 << 6)
+#define MD_SDIR_AX_SHFT 5 /* AC low */
+#define MD_SDIR_AX_MASK (1 << 5)
+#define MD_SDIR_AX (1 << 5)
+#define MD_SDIR_STATE_SHFT 7 /* AC low */
+#define MD_SDIR_STATE_MASK (7 << 7)
+#define MD_SDIR_PTR_SHFT 10 /* C low */
+#define MD_SDIR_PTR_MASK (0x3f << 10)
+#define MD_SDIR_CWOFF_SHFT 5 /* C high */
+#define MD_SDIR_CWOFF_MASK (7 << 5)
+#define MD_SDIR_VECMSB_SHFT 11 /* A low */
+#define MD_SDIR_VECMSB_BITMASK 0x1f
+#define MD_SDIR_VECMSB_BITSHFT 7
+#define MD_SDIR_VECMSB_MASK (MD_SDIR_VECMSB_BITMASK << 11)
+#define MD_SDIR_VECLSB_SHFT 5 /* A high */
+#define MD_SDIR_VECLSB_BITMASK 0x7ff
+#define MD_SDIR_VECLSB_BITSHFT 0
+#define MD_SDIR_VECLSB_MASK (MD_SDIR_VECLSB_BITMASK << 5)
+
+/*
+ * Directory initialization values
+ */
+
+#define MD_SDIR_INIT_LO (MD_DIR_UNOWNED << MD_SDIR_STATE_SHFT | \
+ MD_SDIR_AX)
+#define MD_SDIR_INIT_HI 0
+#define MD_SDIR_INIT_PROT (MD_PROT_RW << MD_SPROT_SHFT)
+
+/* Protection and migration field values */
+
+#define MD_PROT_RW (UINT64_CAST 0x6)
+#define MD_PROT_RO (UINT64_CAST 0x3)
+#define MD_PROT_NO (UINT64_CAST 0x0)
+#define MD_PROT_BAD (UINT64_CAST 0x5)
+
+/* Premium SIMM protection entry shifts and masks. */
+
+#define MD_PPROT_SHFT 0 /* Prot. field */
+#define MD_PPROT_MASK 7
+#define MD_PPROT_MIGMD_SHFT 3 /* Migration mode */
+#define MD_PPROT_MIGMD_MASK (3 << 3)
+#define MD_PPROT_REFCNT_SHFT 5 /* Reference count */
+#define MD_PPROT_REFCNT_WIDTH 0x7ffff
+#define MD_PPROT_REFCNT_MASK (MD_PPROT_REFCNT_WIDTH << 5)
+
+#define MD_PPROT_IO_SHFT 45 /* I/O Prot field */
+#define MD_PPROT_IO_MASK (UINT64_CAST 7 << 45)
+
+/* Standard SIMM protection entry shifts and masks. */
+
+#define MD_SPROT_SHFT 0 /* Prot. field */
+#define MD_SPROT_MASK 7
+#define MD_SPROT_MIGMD_SHFT 3 /* Migration mode */
+#define MD_SPROT_MIGMD_MASK (3 << 3)
+#define MD_SPROT_REFCNT_SHFT 5 /* Reference count */
+#define MD_SPROT_REFCNT_WIDTH 0x7ff
+#define MD_SPROT_REFCNT_MASK (MD_SPROT_REFCNT_WIDTH << 5)
+
+/* Migration modes used in protection entries */
+
+#define MD_PROT_MIGMD_IREL (UINT64_CAST 0x3 << 3)
+#define MD_PROT_MIGMD_IABS (UINT64_CAST 0x2 << 3)
+#define MD_PROT_MIGMD_PREL (UINT64_CAST 0x1 << 3)
+#define MD_PROT_MIGMD_OFF (UINT64_CAST 0x0 << 3)
+
+
+/*
+ * Operations on page migration threshold register
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * LED register macros
+ */
+
+#define CPU_LED_ADDR(_nasid, _slice) \
+ (private.p_sn00 ? \
+ REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 + ((_slice) << 5)) : \
+ REMOTE_HUB_ADDR((_nasid), MD_LED0 + ((_slice) << 3)))
+
+#define SET_CPU_LEDS(_nasid, _slice, _val) \
+ (HUB_S(CPU_LED_ADDR(_nasid, _slice), (_val)))
+
+#define SET_MY_LEDS(_v) \
+ SET_CPU_LEDS(get_nasid(), get_slice(), (_v))
+
+/*
+ * Operations on Memory/Directory DIMM control register
+ */
+
+#define DIRTYPE_PREMIUM 1
+#define DIRTYPE_STANDARD 0
+#define MD_MEMORY_CONFIG_DIR_TYPE_GET(region) (\
+ (REMOTE_HUB_L(region, MD_MEMORY_CONFIG) & MMC_DIR_PREMIUM_MASK) >> \
+ MMC_DIR_PREMIUM_SHFT)
+
+
+/*
+ * Operations on page migration count difference and absolute threshold
+ * registers
+ */
+
+#define MD_MIG_DIFF_THRESH_GET(region) ( \
+ REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \
+ MD_MIG_DIFF_THRES_VALUE_MASK)
+
+#define MD_MIG_DIFF_THRESH_SET(region, value) ( \
+ REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \
+ MD_MIG_DIFF_THRES_VALID_MASK | (value)))
+
+#define MD_MIG_DIFF_THRESH_DISABLE(region) ( \
+ REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \
+ REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) \
+ & ~MD_MIG_DIFF_THRES_VALID_MASK))
+
+#define MD_MIG_DIFF_THRESH_ENABLE(region) ( \
+ REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \
+ REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) \
+ | MD_MIG_DIFF_THRES_VALID_MASK))
+
+#define MD_MIG_DIFF_THRESH_IS_ENABLED(region) ( \
+ REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \
+ MD_MIG_DIFF_THRES_VALID_MASK)
+
+#define MD_MIG_VALUE_THRESH_GET(region) ( \
+ REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) & \
+ MD_MIG_VALUE_THRES_VALUE_MASK)
+
+#define MD_MIG_VALUE_THRESH_SET(region, value) ( \
+ REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \
+ MD_MIG_VALUE_THRES_VALID_MASK | (value)))
+
+#define MD_MIG_VALUE_THRESH_DISABLE(region) ( \
+ REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \
+ REMOTE_HUB_L(region, MD_MIG_VALUE_THRESH) \
+ & ~MD_MIG_VALUE_THRES_VALID_MASK))
+
+#define MD_MIG_VALUE_THRESH_ENABLE(region) ( \
+ REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \
+ REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) \
+ | MD_MIG_VALUE_THRES_VALID_MASK))
+
+#define MD_MIG_VALUE_THRESH_IS_ENABLED(region) ( \
+ REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) & \
+ MD_MIG_VALUE_THRES_VALID_MASK)
+
+/*
+ * Operations on page migration candidate register
+ */
+
+#define MD_MIG_CANDIDATE_GET(my_region_id) ( \
+ REMOTE_HUB_L((my_region_id), MD_MIG_CANDIDATE_CLR))
+
+#define MD_MIG_CANDIDATE_HWPFN(value) ((value) & MD_MIG_CANDIDATE_ADDR_MASK)
+
+#define MD_MIG_CANDIDATE_NODEID(value) ( \
+ ((value) & MD_MIG_CANDIDATE_NODEID_MASK) >> MD_MIG_CANDIDATE_NODEID_SHFT)
+
+#define MD_MIG_CANDIDATE_TYPE(value) ( \
+ ((value) & MD_MIG_CANDIDATE_TYPE_MASK) >> MD_MIG_CANDIDATE_TYPE_SHFT)
+
+#define MD_MIG_CANDIDATE_VALID(value) ( \
+ ((value) & MD_MIG_CANDIDATE_VALID_MASK) >> MD_MIG_CANDIDATE_VALID_SHFT)
+
+/*
+ * Macros to retrieve fields in the protection entry
+ */
+
+/* for Premium SIMM */
+#define MD_PPROT_REFCNT_GET(value) ( \
+ ((value) & MD_PPROT_REFCNT_MASK) >> MD_PPROT_REFCNT_SHFT)
+
+#define MD_PPROT_MIGMD_GET(value) ( \
+ ((value) & MD_PPROT_MIGMD_MASK) >> MD_PPROT_MIGMD_SHFT)
+
+/* for Standard SIMM */
+#define MD_SPROT_REFCNT_GET(value) ( \
+ ((value) & MD_SPROT_REFCNT_MASK) >> MD_SPROT_REFCNT_SHFT)
+
+#define MD_SPROT_MIGMD_GET(value) ( \
+ ((value) & MD_SPROT_MIGMD_MASK) >> MD_SPROT_MIGMD_SHFT)
+
+/*
+ * Format of dir_error, mem_error, protocol_error and misc_error registers
+ */
+
+struct dir_error_reg {
+ u64 uce_vld: 1, /* 63: valid directory uce */
+ ae_vld: 1, /* 62: valid dir prot ecc error */
+ ce_vld: 1, /* 61: valid correctable ECC err*/
+ rsvd1: 19, /* 60-42: reserved */
+ bad_prot: 3, /* 41-39: encoding, bad access rights*/
+ bad_syn: 7, /* 38-32: bad dir syndrome */
+ rsvd2: 2, /* 31-30: reserved */
+ hspec_addr:27, /* 29-03: bddir space bad entry */
+ uce_ovr: 1, /* 2: multiple dir uce's */
+ ae_ovr: 1, /* 1: multiple prot ecc errs*/
+ ce_ovr: 1; /* 0: multiple correctable errs */
+};
+
+typedef union md_dir_error {
+ u64 derr_reg; /* the entire register */
+ struct dir_error_reg derr_fmt; /* the register format */
+} md_dir_error_t;
+
+
+struct mem_error_reg {
+ u64 uce_vld: 1, /* 63: valid memory uce */
+ ce_vld: 1, /* 62: valid correctable ECC err*/
+ rsvd1: 22, /* 61-40: reserved */
+ bad_syn: 8, /* 39-32: bad mem ecc syndrome */
+ address: 29, /* 31-03: bad entry pointer */
+ rsvd2: 1, /* 2: reserved */
+ uce_ovr: 1, /* 1: multiple mem uce's */
+ ce_ovr: 1; /* 0: multiple correctable errs */
+};
+
+
+typedef union md_mem_error {
+ u64 merr_reg; /* the entire register */
+ struct mem_error_reg merr_fmt; /* format of the mem_error reg */
+} md_mem_error_t;
+
+
+struct proto_error_reg {
+ u64 valid: 1, /* 63: valid protocol error */
+ rsvd1: 2, /* 62-61: reserved */
+ initiator:11, /* 60-50: id of request initiator*/
+ backoff: 2, /* 49-48: backoff control */
+ msg_type: 8, /* 47-40: type of request */
+ access: 2, /* 39-38: access rights of initiator*/
+ priority: 1, /* 37: priority level of requestor*/
+ dir_state: 4, /* 36-33: state of directory */
+ pointer_me:1, /* 32: initiator same as dir ptr */
+ address: 29, /* 31-03: request address */
+ rsvd2: 2, /* 02-01: reserved */
+ overrun: 1; /* 0: multiple protocol errs */
+};
+
+typedef union md_proto_error {
+ u64 perr_reg; /* the entire register */
+ struct proto_error_reg perr_fmt; /* format of the register */
+} md_proto_error_t;
+
+
+struct md_sdir_high_fmt {
+ unsigned short sd_hi_bvec : 11,
+ sd_hi_ecc : 5;
+};
+
+
+typedef union md_sdir_high {
+ /* The 16 bits of standard directory, upper word */
+ unsigned short sd_hi_val;
+ struct md_sdir_high_fmt sd_hi_fmt;
+}md_sdir_high_t;
+
+
+struct md_sdir_low_shared_fmt {
+ /* The meaning of lower directory, shared */
+ unsigned short sds_lo_bvec : 5,
+ sds_lo_unused: 1,
+ sds_lo_state : 3,
+ sds_lo_prio : 1,
+ sds_lo_ax : 1,
+ sds_lo_ecc : 5;
+};
+
+struct md_sdir_low_exclusive_fmt {
+ /* The meaning of lower directory, exclusive */
+ unsigned short sde_lo_ptr : 6,
+ sde_lo_state : 3,
+ sde_lo_prio : 1,
+ sde_lo_ax : 1,
+ sde_lo_ecc : 5;
+};
+
+
+typedef union md_sdir_low {
+ /* The 16 bits of standard directory, lower word */
+ unsigned short sd_lo_val;
+ struct md_sdir_low_exclusive_fmt sde_lo_fmt;
+ struct md_sdir_low_shared_fmt sds_lo_fmt;
+}md_sdir_low_t;
+
+
+
+struct md_pdir_high_fmt {
+ u64 pd_hi_unused : 16,
+ pd_hi_bvec : 38,
+ pd_hi_unused1 : 3,
+ pd_hi_ecc : 7;
+};
+
+
+typedef union md_pdir_high {
+ /* The 48 bits of standard directory, upper word */
+ u64 pd_hi_val;
+ struct md_pdir_high_fmt pd_hi_fmt;
+}md_pdir_high_t;
+
+
+struct md_pdir_low_shared_fmt {
+ /* The meaning of lower directory, shared */
+ u64 pds_lo_unused : 16,
+ pds_lo_bvec : 26,
+ pds_lo_cnt : 6,
+ pds_lo_state : 3,
+ pds_lo_ste : 1,
+ pds_lo_prio : 4,
+ pds_lo_ax : 1,
+ pds_lo_ecc : 7;
+};
+
+struct md_pdir_low_exclusive_fmt {
+ /* The meaning of lower directory, exclusive */
+ u64 pde_lo_unused : 31,
+ pde_lo_ptr : 11,
+ pde_lo_unused1 : 6,
+ pde_lo_state : 3,
+ pde_lo_ste : 1,
+ pde_lo_prio : 4,
+ pde_lo_ax : 1,
+ pde_lo_ecc : 7;
+};
+
+
+typedef union md_pdir_loent {
+ /* The 48 bits of premium directory, lower word */
+ u64 pd_lo_val;
+ struct md_pdir_low_exclusive_fmt pde_lo_fmt;
+ struct md_pdir_low_shared_fmt pds_lo_fmt;
+}md_pdir_low_t;
+
+
+/*
+ * the following two "union" definitions and two
+ * "struct" definitions are used in vmdump.c to
+ * represent directory memory information.
+ */
+
+typedef union md_dir_high {
+ md_sdir_high_t md_sdir_high;
+ md_pdir_high_t md_pdir_high;
+} md_dir_high_t;
+
+typedef union md_dir_low {
+ md_sdir_low_t md_sdir_low;
+ md_pdir_low_t md_pdir_low;
+} md_dir_low_t;
+
+typedef struct bddir_entry {
+ md_dir_low_t md_dir_low;
+ md_dir_high_t md_dir_high;
+} bddir_entry_t;
+
+typedef struct dir_mem_entry {
+ u64 prcpf[MAX_REGIONS];
+ bddir_entry_t directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE];
+} dir_mem_entry_t;
+
+
+
+typedef union md_perf_sel {
+ u64 perf_sel_reg;
+ struct {
+ u64 perf_rsvd : 60,
+ perf_en : 1,
+ perf_sel : 3;
+ } perf_sel_bits;
+} md_perf_sel_t;
+
+typedef union md_perf_cnt {
+ u64 perf_cnt;
+ struct {
+ u64 perf_rsvd : 44,
+ perf_cnt : 20;
+ } perf_cnt_bits;
+} md_perf_cnt_t;
+
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define DIR_ERROR_VALID_MASK 0xe000000000000000
+#define DIR_ERROR_VALID_SHFT 61
+#define DIR_ERROR_VALID_UCE 0x8000000000000000
+#define DIR_ERROR_VALID_AE 0x4000000000000000
+#define DIR_ERROR_VALID_CE 0x2000000000000000
+
+#define MEM_ERROR_VALID_MASK 0xc000000000000000
+#define MEM_ERROR_VALID_SHFT 62
+#define MEM_ERROR_VALID_UCE 0x8000000000000000
+#define MEM_ERROR_VALID_CE 0x4000000000000000
+
+#define PROTO_ERROR_VALID_MASK 0x8000000000000000
+
+#define MISC_ERROR_VALID_MASK 0x3ff
+
+/*
+ * Mask for hspec address that is stored in the dir error register.
+ * This represents bits 29 through 3.
+ */
+#define DIR_ERR_HSPEC_MASK 0x3ffffff8
+#define ERROR_HSPEC_MASK 0x3ffffff8
+#define ERROR_HSPEC_SHFT 3
+#define ERROR_ADDR_MASK 0xfffffff8
+#define ERROR_ADDR_SHFT 3
+
+/*
+ * MD_MISC_ERROR register defines.
+ */
+
+#define MMCE_VALID_MASK 0x3ff
+#define MMCE_ILL_MSG_SHFT 8
+#define MMCE_ILL_MSG_MASK (UINT64_CAST 0x03 << MMCE_ILL_MSG_SHFT)
+#define MMCE_ILL_REV_SHFT 6
+#define MMCE_ILL_REV_MASK (UINT64_CAST 0x03 << MMCE_ILL_REV_SHFT)
+#define MMCE_LONG_PACK_SHFT 4
+#define MMCE_LONG_PACK_MASK (UINT64_CAST 0x03 << MMCE_lONG_PACK_SHFT)
+#define MMCE_SHORT_PACK_SHFT 2
+#define MMCE_SHORT_PACK_MASK (UINT64_CAST 0x03 << MMCE_SHORT_PACK_SHFT)
+#define MMCE_BAD_DATA_SHFT 0
+#define MMCE_BAD_DATA_MASK (UINT64_CAST 0x03 << MMCE_BAD_DATA_SHFT)
+
+
+#define MD_PERF_COUNTERS 6
+#define MD_PERF_SETS 6
+
+#define MEM_DIMM_MASK 0xe0000000
+#define MEM_DIMM_SHFT 29
+
+#endif /* _ASM_SN_SN0_HUBMD_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h
new file mode 100644
index 000000000..b73c4bee6
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubni.h
@@ -0,0 +1,255 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubni.h>, Revision 1.27.
+ *
+ * Copyright (C) 1992-1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SGI_SN0_HUBNI_H
+#define _ASM_SGI_SN0_HUBNI_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+/*
+ * Hub Network Interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ */
+
+#define NI_BASE 0x600000
+#define NI_BASE_TABLES 0x630000
+
+#define NI_STATUS_REV_ID 0x600000 /* Hub network status, rev, and ID */
+#define NI_PORT_RESET 0x600008 /* Reset the network interface */
+#define NI_PROTECTION 0x600010 /* NI register access permissions */
+#define NI_GLOBAL_PARMS 0x600018 /* LLP parameters */
+#define NI_SCRATCH_REG0 0x600100 /* Scratch register 0 (64 bits) */
+#define NI_SCRATCH_REG1 0x600108 /* Scratch register 1 (64 bits) */
+#define NI_DIAG_PARMS 0x600110 /* Parameters for diags */
+
+#define NI_VECTOR_PARMS 0x600200 /* Vector PIO routing parameters */
+#define NI_VECTOR 0x600208 /* Vector PIO route */
+#define NI_VECTOR_DATA 0x600210 /* Vector PIO data */
+#define NI_VECTOR_STATUS 0x600300 /* Vector PIO return status */
+#define NI_RETURN_VECTOR 0x600308 /* Vector PIO return vector */
+#define NI_VECTOR_READ_DATA 0x600310 /* Vector PIO read data */
+#define NI_VECTOR_CLEAR 0x600380 /* Vector PIO read & clear status */
+
+#define NI_IO_PROTECT 0x600400 /* PIO protection bits */
+#define NI_IO_PROT_OVRRD 0x600408 /* PIO protection bit override */
+
+#define NI_AGE_CPU0_MEMORY 0x600500 /* CPU 0 memory age control */
+#define NI_AGE_CPU0_PIO 0x600508 /* CPU 0 PIO age control */
+#define NI_AGE_CPU1_MEMORY 0x600510 /* CPU 1 memory age control */
+#define NI_AGE_CPU1_PIO 0x600518 /* CPU 1 PIO age control */
+#define NI_AGE_GBR_MEMORY 0x600520 /* GBR memory age control */
+#define NI_AGE_GBR_PIO 0x600528 /* GBR PIO age control */
+#define NI_AGE_IO_MEMORY 0x600530 /* IO memory age control */
+#define NI_AGE_IO_PIO 0x600538 /* IO PIO age control */
+#define NI_AGE_REG_MIN NI_AGE_CPU0_MEMORY
+#define NI_AGE_REG_MAX NI_AGE_IO_PIO
+
+#define NI_PORT_PARMS 0x608000 /* LLP Parameters */
+#define NI_PORT_ERROR 0x608008 /* LLP Errors */
+#define NI_PORT_ERROR_CLEAR 0x608088 /* Clear the error bits */
+
+#define NI_META_TABLE0 0x638000 /* First meta routing table entry */
+#define NI_META_TABLE(_x) (NI_META_TABLE0 + (8 * (_x)))
+#define NI_META_ENTRIES 32
+
+#define NI_LOCAL_TABLE0 0x638100 /* First local routing table entry */
+#define NI_LOCAL_TABLE(_x) (NI_LOCAL_TABLE0 + (8 * (_x)))
+#define NI_LOCAL_ENTRIES 16
+
+/*
+ * NI_STATUS_REV_ID mask and shift definitions
+ * Have to use UINT64_CAST instead of 'L' suffix, for assembler.
+ */
+
+#define NSRI_8BITMODE_SHFT 30
+#define NSRI_8BITMODE_MASK (UINT64_CAST 0x1 << 30)
+#define NSRI_LINKUP_SHFT 29
+#define NSRI_LINKUP_MASK (UINT64_CAST 0x1 << 29)
+#define NSRI_DOWNREASON_SHFT 28 /* 0=failed, 1=never came */
+#define NSRI_DOWNREASON_MASK (UINT64_CAST 0x1 << 28) /* out of reset. */
+#define NSRI_MORENODES_SHFT 18
+#define NSRI_MORENODES_MASK (UINT64_CAST 1 << 18) /* Max. # of nodes */
+#define MORE_MEMORY 0
+#define MORE_NODES 1
+#define NSRI_REGIONSIZE_SHFT 17
+#define NSRI_REGIONSIZE_MASK (UINT64_CAST 1 << 17) /* Granularity */
+#define REGIONSIZE_FINE 1
+#define REGIONSIZE_COARSE 0
+#define NSRI_NODEID_SHFT 8
+#define NSRI_NODEID_MASK (UINT64_CAST 0x1ff << 8)/* Node (Hub) ID */
+#define NSRI_REV_SHFT 4
+#define NSRI_REV_MASK (UINT64_CAST 0xf << 4) /* Chip Revision */
+#define NSRI_CHIPID_SHFT 0
+#define NSRI_CHIPID_MASK (UINT64_CAST 0xf) /* Chip type ID */
+
+/*
+ * In fine mode, each node is a region. In coarse mode, there are
+ * eight nodes per region.
+ */
+#define NASID_TO_FINEREG_SHFT 0
+#define NASID_TO_COARSEREG_SHFT 3
+
+/* NI_PORT_RESET mask definitions */
+
+#define NPR_PORTRESET (UINT64_CAST 1 << 7) /* Send warm reset */
+#define NPR_LINKRESET (UINT64_CAST 1 << 1) /* Send link reset */
+#define NPR_LOCALRESET (UINT64_CAST 1) /* Reset entire hub */
+
+/* NI_PROTECTION mask and shift definitions */
+
+#define NPROT_RESETOK (UINT64_CAST 1)
+
+/* NI_GLOBAL_PARMS mask and shift definitions */
+
+#define NGP_MAXRETRY_SHFT 48 /* Maximum retries */
+#define NGP_MAXRETRY_MASK (UINT64_CAST 0x3ff << 48)
+#define NGP_TAILTOWRAP_SHFT 32 /* Tail timeout wrap */
+#define NGP_TAILTOWRAP_MASK (UINT64_CAST 0xffff << 32)
+
+#define NGP_CREDITTOVAL_SHFT 16 /* Tail timeout wrap */
+#define NGP_CREDITTOVAL_MASK (UINT64_CAST 0xf << 16)
+#define NGP_TAILTOVAL_SHFT 4 /* Tail timeout value */
+#define NGP_TAILTOVAL_MASK (UINT64_CAST 0xf << 4)
+
+/* NI_DIAG_PARMS mask and shift definitions */
+
+#define NDP_PORTTORESET (UINT64_CAST 1 << 18) /* Port tmout reset */
+#define NDP_LLP8BITMODE (UINT64_CAST 1 << 12) /* LLP 8-bit mode */
+#define NDP_PORTDISABLE (UINT64_CAST 1 << 6) /* Port disable */
+#define NDP_SENDERROR (UINT64_CAST 1) /* Send data error */
+
+/*
+ * NI_VECTOR_PARMS mask and shift definitions.
+ * TYPE may be any of the first four PIOTYPEs defined under NI_VECTOR_STATUS.
+ */
+
+#define NVP_PIOID_SHFT 40
+#define NVP_PIOID_MASK (UINT64_CAST 0x3ff << 40)
+#define NVP_WRITEID_SHFT 32
+#define NVP_WRITEID_MASK (UINT64_CAST 0xff << 32)
+#define NVP_ADDRESS_MASK (UINT64_CAST 0xffff8) /* Bits 19:3 */
+#define NVP_TYPE_SHFT 0
+#define NVP_TYPE_MASK (UINT64_CAST 0x3)
+
+/* NI_VECTOR_STATUS mask and shift definitions */
+
+#define NVS_VALID (UINT64_CAST 1 << 63)
+#define NVS_OVERRUN (UINT64_CAST 1 << 62)
+#define NVS_TARGET_SHFT 51
+#define NVS_TARGET_MASK (UINT64_CAST 0x3ff << 51)
+#define NVS_PIOID_SHFT 40
+#define NVS_PIOID_MASK (UINT64_CAST 0x3ff << 40)
+#define NVS_WRITEID_SHFT 32
+#define NVS_WRITEID_MASK (UINT64_CAST 0xff << 32)
+#define NVS_ADDRESS_MASK (UINT64_CAST 0xfffffff8) /* Bits 31:3 */
+#define NVS_TYPE_SHFT 0
+#define NVS_TYPE_MASK (UINT64_CAST 0x7)
+#define NVS_ERROR_MASK (UINT64_CAST 0x4) /* bit set means error */
+
+
+#define PIOTYPE_READ 0 /* VECTOR_PARMS and VECTOR_STATUS */
+#define PIOTYPE_WRITE 1 /* VECTOR_PARMS and VECTOR_STATUS */
+#define PIOTYPE_UNDEFINED 2 /* VECTOR_PARMS and VECTOR_STATUS */
+#define PIOTYPE_EXCHANGE 3 /* VECTOR_PARMS and VECTOR_STATUS */
+#define PIOTYPE_ADDR_ERR 4 /* VECTOR_STATUS only */
+#define PIOTYPE_CMD_ERR 5 /* VECTOR_STATUS only */
+#define PIOTYPE_PROT_ERR 6 /* VECTOR_STATUS only */
+#define PIOTYPE_UNKNOWN 7 /* VECTOR_STATUS only */
+
+/* NI_AGE_XXX mask and shift definitions */
+
+#define NAGE_VCH_SHFT 10
+#define NAGE_VCH_MASK (UINT64_CAST 3 << 10)
+#define NAGE_CC_SHFT 8
+#define NAGE_CC_MASK (UINT64_CAST 3 << 8)
+#define NAGE_AGE_SHFT 0
+#define NAGE_AGE_MASK (UINT64_CAST 0xff)
+#define NAGE_MASK (NAGE_VCH_MASK | NAGE_CC_MASK | NAGE_AGE_MASK)
+
+#define VCHANNEL_A 0
+#define VCHANNEL_B 1
+#define VCHANNEL_ANY 2
+
+/* NI_PORT_PARMS mask and shift definitions */
+
+#define NPP_NULLTO_SHFT 10
+#define NPP_NULLTO_MASK (UINT64_CAST 0x3f << 16)
+#define NPP_MAXBURST_SHFT 0
+#define NPP_MAXBURST_MASK (UINT64_CAST 0x3ff)
+#define NPP_RESET_DFLT_HUB20 ((UINT64_CAST 1 << NPP_NULLTO_SHFT) | \
+ (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT))
+#define NPP_RESET_DEFAULTS ((UINT64_CAST 6 << NPP_NULLTO_SHFT) | \
+ (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT))
+
+
+/* NI_PORT_ERROR mask and shift definitions */
+
+#define NPE_LINKRESET (UINT64_CAST 1 << 37)
+#define NPE_INTERNALERROR (UINT64_CAST 1 << 36)
+#define NPE_BADMESSAGE (UINT64_CAST 1 << 35)
+#define NPE_BADDEST (UINT64_CAST 1 << 34)
+#define NPE_FIFOOVERFLOW (UINT64_CAST 1 << 33)
+#define NPE_CREDITTO_SHFT 28
+#define NPE_CREDITTO_MASK (UINT64_CAST 0xf << 28)
+#define NPE_TAILTO_SHFT 24
+#define NPE_TAILTO_MASK (UINT64_CAST 0xf << 24)
+#define NPE_RETRYCOUNT_SHFT 16
+#define NPE_RETRYCOUNT_MASK (UINT64_CAST 0xff << 16)
+#define NPE_CBERRCOUNT_SHFT 8
+#define NPE_CBERRCOUNT_MASK (UINT64_CAST 0xff << 8)
+#define NPE_SNERRCOUNT_SHFT 0
+#define NPE_SNERRCOUNT_MASK (UINT64_CAST 0xff << 0)
+#define NPE_MASK 0x3effffffff
+
+#define NPE_COUNT_MAX 0xff
+
+#define NPE_FATAL_ERRORS (NPE_LINKRESET | NPE_INTERNALERROR | \
+ NPE_BADMESSAGE | NPE_BADDEST | \
+ NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK | \
+ NPE_TAILTO_MASK)
+
+/* NI_META_TABLE mask and shift definitions */
+
+#define NMT_EXIT_PORT_MASK (UINT64_CAST 0xf)
+
+/* NI_LOCAL_TABLE mask and shift definitions */
+
+#define NLT_EXIT_PORT_MASK (UINT64_CAST 0xf)
+
+#ifndef __ASSEMBLY__
+
+typedef union hubni_port_error_u {
+ u64 nipe_reg_value;
+ struct {
+ u64 nipe_rsvd: 26, /* unused */
+ nipe_lnk_reset: 1, /* link reset */
+ nipe_intl_err: 1, /* internal error */
+ nipe_bad_msg: 1, /* bad message */
+ nipe_bad_dest: 1, /* bad dest */
+ nipe_fifo_ovfl: 1, /* fifo overflow */
+ nipe_rsvd1: 1, /* unused */
+ nipe_credit_to: 4, /* credit timeout */
+ nipe_tail_to: 4, /* tail timeout */
+ nipe_retry_cnt: 8, /* retry error count */
+ nipe_cb_cnt: 8, /* checkbit error count */
+ nipe_sn_cnt: 8; /* sequence number count */
+ } nipe_fields_s;
+} hubni_port_error_t;
+
+#define NI_LLP_RETRY_MAX 0xff
+#define NI_LLP_CB_MAX 0xff
+#define NI_LLP_SN_MAX 0xff
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SGI_SN0_HUBNI_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubpi.h b/arch/mips/include/asm/sn/sn0/hubpi.h
new file mode 100644
index 000000000..7b8365591
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubpi.h
@@ -0,0 +1,409 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubpi.h>, revision 1.28.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_HUBPI_H
+#define _ASM_SN_SN0_HUBPI_H
+
+#include <linux/types.h>
+
+/*
+ * Hub I/O interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ * All register "addresses" are actually offsets. Use the LOCAL_HUB
+ * or REMOTE_HUB macros to synthesize an actual address
+ */
+
+#define PI_BASE 0x000000
+
+/* General protection and control registers */
+
+#define PI_CPU_PROTECT 0x000000 /* CPU Protection */
+#define PI_PROT_OVERRD 0x000008 /* Clear CPU Protection bit */
+#define PI_IO_PROTECT 0x000010 /* Interrupt Pending Protection */
+#define PI_REGION_PRESENT 0x000018 /* Indicates whether region exists */
+#define PI_CPU_NUM 0x000020 /* CPU Number ID */
+#define PI_CALIAS_SIZE 0x000028 /* Cached Alias Size */
+#define PI_MAX_CRB_TIMEOUT 0x000030 /* Maximum Timeout for CRB */
+#define PI_CRB_SFACTOR 0x000038 /* Scale factor for CRB timeout */
+
+/* CALIAS values */
+#define PI_CALIAS_SIZE_0 0
+#define PI_CALIAS_SIZE_4K 1
+#define PI_CALIAS_SIZE_8K 2
+#define PI_CALIAS_SIZE_16K 3
+#define PI_CALIAS_SIZE_32K 4
+#define PI_CALIAS_SIZE_64K 5
+#define PI_CALIAS_SIZE_128K 6
+#define PI_CALIAS_SIZE_256K 7
+#define PI_CALIAS_SIZE_512K 8
+#define PI_CALIAS_SIZE_1M 9
+#define PI_CALIAS_SIZE_2M 10
+#define PI_CALIAS_SIZE_4M 11
+#define PI_CALIAS_SIZE_8M 12
+#define PI_CALIAS_SIZE_16M 13
+#define PI_CALIAS_SIZE_32M 14
+#define PI_CALIAS_SIZE_64M 15
+
+/* Processor control and status checking */
+
+#define PI_CPU_PRESENT_A 0x000040 /* CPU Present A */
+#define PI_CPU_PRESENT_B 0x000048 /* CPU Present B */
+#define PI_CPU_ENABLE_A 0x000050 /* CPU Enable A */
+#define PI_CPU_ENABLE_B 0x000058 /* CPU Enable B */
+#define PI_REPLY_LEVEL 0x000060 /* Reply Level */
+#define PI_HARDRESET_BIT 0x020068 /* Bit cleared by s/w on SR */
+#define PI_NMI_A 0x000070 /* NMI to CPU A */
+#define PI_NMI_B 0x000078 /* NMI to CPU B */
+#define PI_NMI_OFFSET (PI_NMI_B - PI_NMI_A)
+#define PI_SOFTRESET 0x000080 /* Softreset (to both CPUs) */
+
+/* Regular Interrupt register checking. */
+
+#define PI_INT_PEND_MOD 0x000090 /* Write to set pending ints */
+#define PI_INT_PEND0 0x000098 /* Read to get pending ints */
+#define PI_INT_PEND1 0x0000a0 /* Read to get pending ints */
+#define PI_INT_MASK0_A 0x0000a8 /* Interrupt Mask 0 for CPU A */
+#define PI_INT_MASK1_A 0x0000b0 /* Interrupt Mask 1 for CPU A */
+#define PI_INT_MASK0_B 0x0000b8 /* Interrupt Mask 0 for CPU B */
+#define PI_INT_MASK1_B 0x0000c0 /* Interrupt Mask 1 for CPU B */
+
+#define PI_INT_MASK_OFFSET 0x10 /* Offset from A to B */
+
+/* Crosscall interrupts */
+
+#define PI_CC_PEND_SET_A 0x0000c8 /* CC Interrupt Pending Set, CPU A */
+#define PI_CC_PEND_SET_B 0x0000d0 /* CC Interrupt Pending Set, CPU B */
+#define PI_CC_PEND_CLR_A 0x0000d8 /* CC Interrupt Pending Clr, CPU A */
+#define PI_CC_PEND_CLR_B 0x0000e0 /* CC Interrupt Pending Clr, CPU B */
+#define PI_CC_MASK 0x0000e8 /* CC Interrupt mask */
+
+#define PI_INT_SET_OFFSET 0x08 /* Offset from A to B */
+
+/* Realtime Counter and Profiler control registers */
+
+#define PI_RT_COUNT 0x030100 /* Real Time Counter */
+#define PI_RT_COMPARE_A 0x000108 /* Real Time Compare A */
+#define PI_RT_COMPARE_B 0x000110 /* Real Time Compare B */
+#define PI_PROFILE_COMPARE 0x000118 /* L5 int to both cpus when == RTC */
+#define PI_RT_PEND_A 0x000120 /* Set if RT int for A pending */
+#define PI_RT_PEND_B 0x000128 /* Set if RT int for B pending */
+#define PI_PROF_PEND_A 0x000130 /* Set if Prof int for A pending */
+#define PI_PROF_PEND_B 0x000138 /* Set if Prof int for B pending */
+#define PI_RT_EN_A 0x000140 /* RT int for CPU A enable */
+#define PI_RT_EN_B 0x000148 /* RT int for CPU B enable */
+#define PI_PROF_EN_A 0x000150 /* PROF int for CPU A enable */
+#define PI_PROF_EN_B 0x000158 /* PROF int for CPU B enable */
+#define PI_RT_LOCAL_CTRL 0x000160 /* RT control register */
+#define PI_RT_FILTER_CTRL 0x000168 /* GCLK Filter control register */
+
+#define PI_COUNT_OFFSET 0x08 /* A to B offset for all counts */
+
+/* Built-In Self Test support */
+
+#define PI_BIST_WRITE_DATA 0x000200 /* BIST write data */
+#define PI_BIST_READ_DATA 0x000208 /* BIST read data */
+#define PI_BIST_COUNT_TARG 0x000210 /* BIST Count and Target */
+#define PI_BIST_READY 0x000218 /* BIST Ready indicator */
+#define PI_BIST_SHIFT_LOAD 0x000220 /* BIST control */
+#define PI_BIST_SHIFT_UNLOAD 0x000228 /* BIST control */
+#define PI_BIST_ENTER_RUN 0x000230 /* BIST control */
+
+/* Graphics control registers */
+
+#define PI_GFX_PAGE_A 0x000300 /* Graphics page A */
+#define PI_GFX_CREDIT_CNTR_A 0x000308 /* Graphics credit counter A */
+#define PI_GFX_BIAS_A 0x000310 /* Graphics bias A */
+#define PI_GFX_INT_CNTR_A 0x000318 /* Graphics interrupt counter A */
+#define PI_GFX_INT_CMP_A 0x000320 /* Graphics interrupt comparator A */
+#define PI_GFX_PAGE_B 0x000328 /* Graphics page B */
+#define PI_GFX_CREDIT_CNTR_B 0x000330 /* Graphics credit counter B */
+#define PI_GFX_BIAS_B 0x000338 /* Graphics bias B */
+#define PI_GFX_INT_CNTR_B 0x000340 /* Graphics interrupt counter B */
+#define PI_GFX_INT_CMP_B 0x000348 /* Graphics interrupt comparator B */
+
+#define PI_GFX_OFFSET (PI_GFX_PAGE_B - PI_GFX_PAGE_A)
+#define PI_GFX_PAGE_ENABLE 0x0000010000000000LL
+
+/* Error and timeout registers */
+#define PI_ERR_INT_PEND 0x000400 /* Error Interrupt Pending */
+#define PI_ERR_INT_MASK_A 0x000408 /* Error Interrupt mask for CPU A */
+#define PI_ERR_INT_MASK_B 0x000410 /* Error Interrupt mask for CPU B */
+#define PI_ERR_STACK_ADDR_A 0x000418 /* Error stack address for CPU A */
+#define PI_ERR_STACK_ADDR_B 0x000420 /* Error stack address for CPU B */
+#define PI_ERR_STACK_SIZE 0x000428 /* Error Stack Size */
+#define PI_ERR_STATUS0_A 0x000430 /* Error Status 0A */
+#define PI_ERR_STATUS0_A_RCLR 0x000438 /* Error Status 0A clear on read */
+#define PI_ERR_STATUS1_A 0x000440 /* Error Status 1A */
+#define PI_ERR_STATUS1_A_RCLR 0x000448 /* Error Status 1A clear on read */
+#define PI_ERR_STATUS0_B 0x000450 /* Error Status 0B */
+#define PI_ERR_STATUS0_B_RCLR 0x000458 /* Error Status 0B clear on read */
+#define PI_ERR_STATUS1_B 0x000460 /* Error Status 1B */
+#define PI_ERR_STATUS1_B_RCLR 0x000468 /* Error Status 1B clear on read */
+#define PI_SPOOL_CMP_A 0x000470 /* Spool compare for CPU A */
+#define PI_SPOOL_CMP_B 0x000478 /* Spool compare for CPU B */
+#define PI_CRB_TIMEOUT_A 0x000480 /* Timed out CRB entries for A */
+#define PI_CRB_TIMEOUT_B 0x000488 /* Timed out CRB entries for B */
+#define PI_SYSAD_ERRCHK_EN 0x000490 /* Enables SYSAD error checking */
+#define PI_BAD_CHECK_BIT_A 0x000498 /* Force SYSAD check bit error */
+#define PI_BAD_CHECK_BIT_B 0x0004a0 /* Force SYSAD check bit error */
+#define PI_NACK_CNT_A 0x0004a8 /* Consecutive NACK counter */
+#define PI_NACK_CNT_B 0x0004b0 /* " " for CPU B */
+#define PI_NACK_CMP 0x0004b8 /* NACK count compare */
+#define PI_STACKADDR_OFFSET (PI_ERR_STACK_ADDR_B - PI_ERR_STACK_ADDR_A)
+#define PI_ERRSTAT_OFFSET (PI_ERR_STATUS0_B - PI_ERR_STATUS0_A)
+#define PI_RDCLR_OFFSET (PI_ERR_STATUS0_A_RCLR - PI_ERR_STATUS0_A)
+
+/* Bits in PI_ERR_INT_PEND */
+#define PI_ERR_SPOOL_CMP_B 0x00000001 /* Spool end hit high water */
+#define PI_ERR_SPOOL_CMP_A 0x00000002
+#define PI_ERR_SPUR_MSG_B 0x00000004 /* Spurious message intr. */
+#define PI_ERR_SPUR_MSG_A 0x00000008
+#define PI_ERR_WRB_TERR_B 0x00000010 /* WRB TERR */
+#define PI_ERR_WRB_TERR_A 0x00000020
+#define PI_ERR_WRB_WERR_B 0x00000040 /* WRB WERR */
+#define PI_ERR_WRB_WERR_A 0x00000080
+#define PI_ERR_SYSSTATE_B 0x00000100 /* SysState parity error */
+#define PI_ERR_SYSSTATE_A 0x00000200
+#define PI_ERR_SYSAD_DATA_B 0x00000400 /* SysAD data parity error */
+#define PI_ERR_SYSAD_DATA_A 0x00000800
+#define PI_ERR_SYSAD_ADDR_B 0x00001000 /* SysAD addr parity error */
+#define PI_ERR_SYSAD_ADDR_A 0x00002000
+#define PI_ERR_SYSCMD_DATA_B 0x00004000 /* SysCmd data parity error */
+#define PI_ERR_SYSCMD_DATA_A 0x00008000
+#define PI_ERR_SYSCMD_ADDR_B 0x00010000 /* SysCmd addr parity error */
+#define PI_ERR_SYSCMD_ADDR_A 0x00020000
+#define PI_ERR_BAD_SPOOL_B 0x00040000 /* Error spooling to memory */
+#define PI_ERR_BAD_SPOOL_A 0x00080000
+#define PI_ERR_UNCAC_UNCORR_B 0x00100000 /* Uncached uncorrectable */
+#define PI_ERR_UNCAC_UNCORR_A 0x00200000
+#define PI_ERR_SYSSTATE_TAG_B 0x00400000 /* SysState tag parity error */
+#define PI_ERR_SYSSTATE_TAG_A 0x00800000
+#define PI_ERR_MD_UNCORR 0x01000000 /* Must be cleared in MD */
+
+#define PI_ERR_CLEAR_ALL_A 0x00aaaaaa
+#define PI_ERR_CLEAR_ALL_B 0x00555555
+
+
+/*
+ * The following three macros define all possible error int pends.
+ */
+
+#define PI_FATAL_ERR_CPU_A (PI_ERR_SYSSTATE_TAG_A | \
+ PI_ERR_BAD_SPOOL_A | \
+ PI_ERR_SYSCMD_ADDR_A | \
+ PI_ERR_SYSCMD_DATA_A | \
+ PI_ERR_SYSAD_ADDR_A | \
+ PI_ERR_SYSAD_DATA_A | \
+ PI_ERR_SYSSTATE_A)
+
+#define PI_MISC_ERR_CPU_A (PI_ERR_UNCAC_UNCORR_A | \
+ PI_ERR_WRB_WERR_A | \
+ PI_ERR_WRB_TERR_A | \
+ PI_ERR_SPUR_MSG_A | \
+ PI_ERR_SPOOL_CMP_A)
+
+#define PI_FATAL_ERR_CPU_B (PI_ERR_SYSSTATE_TAG_B | \
+ PI_ERR_BAD_SPOOL_B | \
+ PI_ERR_SYSCMD_ADDR_B | \
+ PI_ERR_SYSCMD_DATA_B | \
+ PI_ERR_SYSAD_ADDR_B | \
+ PI_ERR_SYSAD_DATA_B | \
+ PI_ERR_SYSSTATE_B)
+
+#define PI_MISC_ERR_CPU_B (PI_ERR_UNCAC_UNCORR_B | \
+ PI_ERR_WRB_WERR_B | \
+ PI_ERR_WRB_TERR_B | \
+ PI_ERR_SPUR_MSG_B | \
+ PI_ERR_SPOOL_CMP_B)
+
+#define PI_ERR_GENERIC (PI_ERR_MD_UNCORR)
+
+/*
+ * Error types for PI_ERR_STATUS0_[AB] and error stack:
+ * Use the write types if WRBRRB is 1 else use the read types
+ */
+
+/* Fields in PI_ERR_STATUS0_[AB] */
+#define PI_ERR_ST0_TYPE_MASK 0x0000000000000007
+#define PI_ERR_ST0_TYPE_SHFT 0
+#define PI_ERR_ST0_REQNUM_MASK 0x0000000000000038
+#define PI_ERR_ST0_REQNUM_SHFT 3
+#define PI_ERR_ST0_SUPPL_MASK 0x000000000001ffc0
+#define PI_ERR_ST0_SUPPL_SHFT 6
+#define PI_ERR_ST0_CMD_MASK 0x0000000001fe0000
+#define PI_ERR_ST0_CMD_SHFT 17
+#define PI_ERR_ST0_ADDR_MASK 0x3ffffffffe000000
+#define PI_ERR_ST0_ADDR_SHFT 25
+#define PI_ERR_ST0_OVERRUN_MASK 0x4000000000000000
+#define PI_ERR_ST0_OVERRUN_SHFT 62
+#define PI_ERR_ST0_VALID_MASK 0x8000000000000000
+#define PI_ERR_ST0_VALID_SHFT 63
+
+/* Fields in PI_ERR_STATUS1_[AB] */
+#define PI_ERR_ST1_SPOOL_MASK 0x00000000001fffff
+#define PI_ERR_ST1_SPOOL_SHFT 0
+#define PI_ERR_ST1_TOUTCNT_MASK 0x000000001fe00000
+#define PI_ERR_ST1_TOUTCNT_SHFT 21
+#define PI_ERR_ST1_INVCNT_MASK 0x0000007fe0000000
+#define PI_ERR_ST1_INVCNT_SHFT 29
+#define PI_ERR_ST1_CRBNUM_MASK 0x0000038000000000
+#define PI_ERR_ST1_CRBNUM_SHFT 39
+#define PI_ERR_ST1_WRBRRB_MASK 0x0000040000000000
+#define PI_ERR_ST1_WRBRRB_SHFT 42
+#define PI_ERR_ST1_CRBSTAT_MASK 0x001ff80000000000
+#define PI_ERR_ST1_CRBSTAT_SHFT 43
+#define PI_ERR_ST1_MSGSRC_MASK 0xffe0000000000000
+#define PI_ERR_ST1_MSGSRC_SHFT 53
+
+/* Fields in the error stack */
+#define PI_ERR_STK_TYPE_MASK 0x0000000000000003
+#define PI_ERR_STK_TYPE_SHFT 0
+#define PI_ERR_STK_SUPPL_MASK 0x0000000000000038
+#define PI_ERR_STK_SUPPL_SHFT 3
+#define PI_ERR_STK_REQNUM_MASK 0x00000000000001c0
+#define PI_ERR_STK_REQNUM_SHFT 6
+#define PI_ERR_STK_CRBNUM_MASK 0x0000000000000e00
+#define PI_ERR_STK_CRBNUM_SHFT 9
+#define PI_ERR_STK_WRBRRB_MASK 0x0000000000001000
+#define PI_ERR_STK_WRBRRB_SHFT 12
+#define PI_ERR_STK_CRBSTAT_MASK 0x00000000007fe000
+#define PI_ERR_STK_CRBSTAT_SHFT 13
+#define PI_ERR_STK_CMD_MASK 0x000000007f800000
+#define PI_ERR_STK_CMD_SHFT 23
+#define PI_ERR_STK_ADDR_MASK 0xffffffff80000000
+#define PI_ERR_STK_ADDR_SHFT 31
+
+/* Error type in the error status or stack on Read CRBs */
+#define PI_ERR_RD_PRERR 1
+#define PI_ERR_RD_DERR 2
+#define PI_ERR_RD_TERR 3
+
+/* Error type in the error status or stack on Write CRBs */
+#define PI_ERR_WR_WERR 0
+#define PI_ERR_WR_PWERR 1
+#define PI_ERR_WR_TERR 3
+
+/* Read or Write CRB in error status or stack */
+#define PI_ERR_RRB 0
+#define PI_ERR_WRB 1
+#define PI_ERR_ANY_CRB 2
+
+/* Address masks in the error status and error stack are not the same */
+#define ERR_STK_ADDR_SHFT 7
+#define ERR_STAT0_ADDR_SHFT 3
+
+#define PI_MIN_STACK_SIZE 4096 /* For figuring out the size to set */
+#define PI_STACK_SIZE_SHFT 12 /* 4k */
+
+#define ERR_STACK_SIZE_BYTES(_sz) \
+ ((_sz) ? (PI_MIN_STACK_SIZE << ((_sz) - 1)) : 0)
+
+#ifndef __ASSEMBLY__
+/*
+ * format of error stack and error status registers.
+ */
+
+struct err_stack_format {
+ u64 sk_addr : 33, /* address */
+ sk_cmd : 8, /* message command */
+ sk_crb_sts : 10, /* status from RRB or WRB */
+ sk_rw_rb : 1, /* RRB == 0, WRB == 1 */
+ sk_crb_num : 3, /* WRB (0 to 7) or RRB (0 to 4) */
+ sk_t5_req : 3, /* RRB T5 request number */
+ sk_suppl : 3, /* lowest 3 bit of supplemental */
+ sk_err_type: 3; /* error type */
+};
+
+typedef union pi_err_stack {
+ u64 pi_stk_word;
+ struct err_stack_format pi_stk_fmt;
+} pi_err_stack_t;
+
+struct err_status0_format {
+ u64 s0_valid : 1, /* Valid */
+ s0_ovr_run : 1, /* Overrun, spooled to memory */
+ s0_addr : 37, /* address */
+ s0_cmd : 8, /* message command */
+ s0_supl : 11, /* message supplemental field */
+ s0_t5_req : 3, /* RRB T5 request number */
+ s0_err_type: 3; /* error type */
+};
+
+typedef union pi_err_stat0 {
+ u64 pi_stat0_word;
+ struct err_status0_format pi_stat0_fmt;
+} pi_err_stat0_t;
+
+struct err_status1_format {
+ u64 s1_src : 11, /* message source */
+ s1_crb_sts : 10, /* status from RRB or WRB */
+ s1_rw_rb : 1, /* RRB == 0, WRB == 1 */
+ s1_crb_num : 3, /* WRB (0 to 7) or RRB (0 to 4) */
+ s1_inval_cnt:10, /* signed invalidate counter RRB */
+ s1_to_cnt : 8, /* crb timeout counter */
+ s1_spl_cnt : 21; /* number spooled to memory */
+};
+
+typedef union pi_err_stat1 {
+ u64 pi_stat1_word;
+ struct err_status1_format pi_stat1_fmt;
+} pi_err_stat1_t;
+
+typedef u64 rtc_time_t;
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* Bits in PI_SYSAD_ERRCHK_EN */
+#define PI_SYSAD_ERRCHK_ECCGEN 0x01 /* Enable ECC generation */
+#define PI_SYSAD_ERRCHK_QUALGEN 0x02 /* Enable data quality signal gen. */
+#define PI_SYSAD_ERRCHK_SADP 0x04 /* Enable SysAD parity checking */
+#define PI_SYSAD_ERRCHK_CMDP 0x08 /* Enable SysCmd parity checking */
+#define PI_SYSAD_ERRCHK_STATE 0x10 /* Enable SysState parity checking */
+#define PI_SYSAD_ERRCHK_QUAL 0x20 /* Enable data quality checking */
+#define PI_SYSAD_CHECK_ALL 0x3f /* Generate and check all signals. */
+
+/* Interrupt pending bits on R10000 */
+
+#define HUB_IP_PEND0 0x0400
+#define HUB_IP_PEND1_CC 0x0800
+#define HUB_IP_RT 0x1000
+#define HUB_IP_PROF 0x2000
+#define HUB_IP_ERROR 0x4000
+#define HUB_IP_MASK 0x7c00
+
+/* PI_RT_LOCAL_CTRL mask and shift definitions */
+
+#define PRLC_USE_INT_SHFT 16
+#define PRLC_USE_INT_MASK (UINT64_CAST 1 << 16)
+#define PRLC_USE_INT (UINT64_CAST 1 << 16)
+#define PRLC_GCLK_SHFT 15
+#define PRLC_GCLK_MASK (UINT64_CAST 1 << 15)
+#define PRLC_GCLK (UINT64_CAST 1 << 15)
+#define PRLC_GCLK_COUNT_SHFT 8
+#define PRLC_GCLK_COUNT_MASK (UINT64_CAST 0x7f << 8)
+#define PRLC_MAX_COUNT_SHFT 1
+#define PRLC_MAX_COUNT_MASK (UINT64_CAST 0x7f << 1)
+#define PRLC_GCLK_EN_SHFT 0
+#define PRLC_GCLK_EN_MASK (UINT64_CAST 1)
+#define PRLC_GCLK_EN (UINT64_CAST 1)
+
+/* PI_RT_FILTER_CTRL mask and shift definitions */
+
+/*
+ * Bits for NACK_CNT_A/B and NACK_CMP
+ */
+#define PI_NACK_CNT_EN_SHFT 20
+#define PI_NACK_CNT_EN_MASK 0x100000
+#define PI_NACK_CNT_MASK 0x0fffff
+#define PI_NACK_CNT_MAX 0x0fffff
+
+#endif /* _ASM_SN_SN0_HUBPI_H */
diff --git a/arch/mips/include/asm/sn/sn0/ip27.h b/arch/mips/include/asm/sn/sn0/ip27.h
new file mode 100644
index 000000000..3b5efeefc
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/ip27.h
@@ -0,0 +1,85 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/IP27.h>.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2006 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_IP27_H
+#define _ASM_SN_SN0_IP27_H
+
+#include <asm/mipsregs.h>
+
+/*
+ * Simple definitions for the masks which remove SW bits from pte.
+ */
+
+#define TLBLO_HWBITSHIFT 0 /* Shift value, for masking */
+
+#ifndef __ASSEMBLY__
+
+#define CAUSE_BERRINTR IE_IRQ5
+
+#define ECCF_CACHE_ERR 0
+#define ECCF_TAGLO 1
+#define ECCF_ECC 2
+#define ECCF_ERROREPC 3
+#define ECCF_PADDR 4
+#define ECCF_SIZE (5 * sizeof(long))
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * KL_GET_CPUNUM (similar to EV_GET_SPNUM for EVEREST platform) reads
+ * the processor number of the calling processor. The proc parameters
+ * must be a register.
+ */
+#define KL_GET_CPUNUM(proc) \
+ dli proc, LOCAL_HUB(0); \
+ ld proc, PI_CPU_NUM(proc)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * R10000 status register interrupt bit mask usage for IP27.
+ */
+#define SRB_SWTIMO IE_SW0 /* 0x0100 */
+#define SRB_NET IE_SW1 /* 0x0200 */
+#define SRB_DEV0 IE_IRQ0 /* 0x0400 */
+#define SRB_DEV1 IE_IRQ1 /* 0x0800 */
+#define SRB_TIMOCLK IE_IRQ2 /* 0x1000 */
+#define SRB_PROFCLK IE_IRQ3 /* 0x2000 */
+#define SRB_ERR IE_IRQ4 /* 0x4000 */
+#define SRB_SCHEDCLK IE_IRQ5 /* 0x8000 */
+
+#define SR_IBIT_HI SRB_DEV0
+#define SR_IBIT_PROF SRB_PROFCLK
+
+#define SRB_SWTIMO_IDX 0
+#define SRB_NET_IDX 1
+#define SRB_DEV0_IDX 2
+#define SRB_DEV1_IDX 3
+#define SRB_TIMOCLK_IDX 4
+#define SRB_PROFCLK_IDX 5
+#define SRB_ERR_IDX 6
+#define SRB_SCHEDCLK_IDX 7
+
+#define NUM_CAUSE_INTRS 8
+
+#define SCACHE_LINESIZE 128
+#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1)
+
+#include <asm/sn/addrs.h>
+
+#define LED_CYCLE_MASK 0x0f
+#define LED_CYCLE_SHFT 4
+
+#define SEND_NMI(_nasid, _slice) \
+ REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
+
+#endif /* _ASM_SN_SN0_IP27_H */