Initial import

1 files changed, 132 insertions, 0 deletions

diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
new file mode 100644
index 000000000..95afd663c
--- /dev/null
+++ b/arch/mips/kernel/head.S
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995 Waldorf Electronics
+ * Written by Ralf Baechle and Andreas Busse
+ * Copyright (C) 1994 - 99, 2003, 06 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Modified for DECStation and hence R3000 support by Paul M. Antoine
+ * Further modifications by David S. Miller and Harald Koerfgen
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ */
+#include <linux/init.h>
+#include <linux/threads.h>
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/irqflags.h>
+#include <asm/regdef.h>
+#include <asm/pgtable-bits.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+
+#include <kernel-entry-init.h>
+
+	/*
+	 * For the moment disable interrupts, mark the kernel mode and
+	 * set ST0_KX so that the CPU does not spit fire when using
+	 * 64-bit addresses.  A full initialization of the CPU's status
+	 * register is done later in per_cpu_trap_init().
+	 */
+	.macro	setup_c0_status set clr
+	.set	push
+	mfc0	t0, CP0_STATUS
+	or	t0, ST0_CU0|\set|0x1f|\clr
+	xor	t0, 0x1f|\clr
+	mtc0	t0, CP0_STATUS
+	.set	noreorder
+	sll	zero,3				# ehb
+	.set	pop
+	.endm
+
+	.macro	setup_c0_status_pri
+#ifdef CONFIG_64BIT
+	setup_c0_status ST0_KX 0
+#else
+	setup_c0_status 0 0
+#endif
+	.endm
+
+	.macro	setup_c0_status_sec
+#ifdef CONFIG_64BIT
+	setup_c0_status ST0_KX ST0_BEV
+#else
+	setup_c0_status 0 ST0_BEV
+#endif
+	.endm
+
+#ifndef CONFIG_NO_EXCEPT_FILL
+	/*
+	 * Reserved space for exception handlers.
+	 * Necessary for machines which link their kernels at KSEG0.
+	 */
+	.fill	0x400
+#endif
+
+EXPORT(_stext)
+
+#ifdef CONFIG_BOOT_RAW
+	/*
+	 * Give us a fighting chance of running if execution beings at the
+	 * kernel load address.	 This is needed because this platform does
+	 * not have a ELF loader yet.
+	 */
+FEXPORT(__kernel_entry)
+	j	kernel_entry
+#endif
+
+	__REF
+
+NESTED(kernel_entry, 16, sp)			# kernel entry point
+
+	kernel_entry_setup			# cpu specific setup
+
+	setup_c0_status_pri
+
+	/* We might not get launched at the address the kernel is linked to,
+	   so we jump there.  */
+	PTR_LA	t0, 0f
+	jr	t0
+0:
+
+	PTR_LA		t0, __bss_start		# clear .bss
+	LONG_S		zero, (t0)
+	PTR_LA		t1, __bss_stop - LONGSIZE
+1:
+	PTR_ADDIU	t0, LONGSIZE
+	LONG_S		zero, (t0)
+	bne		t0, t1, 1b
+
+	LONG_S		a0, fw_arg0		# firmware arguments
+	LONG_S		a1, fw_arg1
+	LONG_S		a2, fw_arg2
+	LONG_S		a3, fw_arg3
+
+	MTC0		zero, CP0_CONTEXT	# clear context register
+	PTR_LA		$28, init_thread_union
+	/* Set the SP after an empty pt_regs.  */
+	PTR_LI		sp, _THREAD_SIZE - 32 - PT_SIZE
+	PTR_ADDU	sp, $28
+	back_to_back_c0_hazard
+	set_saved_sp	sp, t0, t1
+	PTR_SUBU	sp, 4 * SZREG		# init stack pointer
+
+	j		start_kernel
+	END(kernel_entry)
+
+#ifdef CONFIG_SMP
+/*
+ * SMP slave cpus entry point.	Board specific code for bootstrap calls this
+ * function after setting up the stack and gp registers.
+ */
+NESTED(smp_bootstrap, 16, sp)
+	smp_slave_setup
+	setup_c0_status_sec
+	j	start_secondary
+	END(smp_bootstrap)
+#endif /* CONFIG_SMP */