Initial import

107 files changed, 35990 insertions, 0 deletions

diff --git a/arch/mips/kernel/.gitignore b/arch/mips/kernel/.gitignore
new file mode 100644
index 000000000..c5f676c3c
--- /dev/null
+++ b/arch/mips/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/mips/kernel/8250-platform.c b/arch/mips/kernel/8250-platform.c
new file mode 100644
index 000000000..5c6b2ab1f
--- /dev/null
+++ b/arch/mips/kernel/8250-platform.c
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#define PORT(base, int)							\
+{									\
+	.iobase		= base,						\
+	.irq		= int,						\
+	.uartclk	= 1843200,					\
+	.iotype		= UPIO_PORT,					\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,		\
+	.regshift	= 0,						\
+}
+
+static struct plat_serial8250_port uart8250_data[] = {
+	PORT(0x3F8, 4),
+	PORT(0x2F8, 3),
+	PORT(0x3E8, 4),
+	PORT(0x2E8, 3),
+	{ },
+};
+
+static struct platform_device uart8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= uart8250_data,
+	},
+};
+
+static int __init uart8250_init(void)
+{
+	return platform_device_register(&uart8250_device);
+}
+
+module_init(uart8250_init);
+
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250 UART probe driver");
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
new file mode 100644
index 000000000..d3d2ff2d7
--- /dev/null
+++ b/arch/mips/kernel/Makefile
@@ -0,0 +1,128 @@
+#
+# Makefile for the Linux/MIPS kernel.
+#
+
+extra-y		:= head.o vmlinux.lds
+
+obj-y		+= cpu-probe.o branch.o elf.o entry.o genex.o idle.o irq.o \
+		   process.o prom.o ptrace.o reset.o setup.o signal.o \
+		   syscall.o time.o topology.o traps.o unaligned.o watch.o \
+		   vdso.o
+
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_early_printk.o = -pg
+CFLAGS_REMOVE_perf_event.o = -pg
+CFLAGS_REMOVE_perf_event_mipsxx.o = -pg
+endif
+
+obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
+obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
+obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
+obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
+obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
+obj-$(CONFIG_CEVT_TXX9)		+= cevt-txx9.o
+obj-$(CONFIG_CSRC_BCM1480)	+= csrc-bcm1480.o
+obj-$(CONFIG_CSRC_IOASIC)	+= csrc-ioasic.o
+obj-$(CONFIG_CSRC_R4K)		+= csrc-r4k.o
+obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
+obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o
+
+obj-$(CONFIG_DEBUG_FS)		+= segment.o
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+obj-$(CONFIG_MODULES)		+= mips_ksyms.o module.o
+obj-$(CONFIG_MODULES_USE_ELF_RELA) += module-rela.o
+
+obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
+obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o ftrace.o
+
+obj-$(CONFIG_CPU_R4K_FPU)	+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_R3000)		+= r2300_fpu.o r2300_switch.o
+obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= r4k_fpu.o octeon_switch.o
+
+obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_SMP_UP)		+= smp-up.o
+obj-$(CONFIG_CPU_BMIPS)		+= smp-bmips.o bmips_vec.o
+
+obj-$(CONFIG_MIPS_MT)		+= mips-mt.o
+obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
+obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
+obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
+obj-$(CONFIG_MIPS_CPS)		+= smp-cps.o cps-vec.o
+obj-$(CONFIG_MIPS_GIC_IPI)	+= smp-gic.o
+obj-$(CONFIG_MIPS_SPRAM)	+= spram.o
+
+obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
+obj-$(CONFIG_MIPS_VPE_LOADER_CMP) += vpe-cmp.o
+obj-$(CONFIG_MIPS_VPE_LOADER_MT) += vpe-mt.o
+obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
+obj-$(CONFIG_MIPS_VPE_APSP_API_CMP) += rtlx-cmp.o
+obj-$(CONFIG_MIPS_VPE_APSP_API_MT) += rtlx-mt.o
+
+obj-$(CONFIG_I8259)		+= i8259.o
+obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
+obj-$(CONFIG_IRQ_CPU_RM7K)	+= irq-rm7000.o
+obj-$(CONFIG_MIPS_MSC)		+= irq-msc01.o
+obj-$(CONFIG_IRQ_TXX9)		+= irq_txx9.o
+obj-$(CONFIG_IRQ_GT641XX)	+= irq-gt641xx.o
+
+obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_32BIT)		+= scall32-o32.o
+obj-$(CONFIG_64BIT)		+= scall64-64.o
+obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
+obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
+obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
+
+obj-$(CONFIG_KGDB)		+= kgdb.o
+obj-$(CONFIG_PROC_FS)		+= proc.o
+
+obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
+
+obj-$(CONFIG_I8253)		+= i8253.o
+
+obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
+
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o crash.o
+obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_EARLY_PRINTK_8250)	+= early_printk_8250.o
+obj-$(CONFIG_SPINLOCK_TEST)	+= spinlock_test.o
+obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
+obj-$(CONFIG_MIPSR2_TO_R6_EMULATOR)	+= mips-r2-to-r6-emul.o
+
+CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -x c /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
+
+obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT)	+= 8250-platform.o
+
+obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o
+obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o
+
+obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
+
+obj-$(CONFIG_MIPS_CM)		+= mips-cm.o
+obj-$(CONFIG_MIPS_CPC)		+= mips-cpc.o
+
+obj-$(CONFIG_CPU_PM)		+= pm.o
+obj-$(CONFIG_MIPS_CPS_PM)	+= pm-cps.o
+
+#
+# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
+# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches
+# here because the compiler may use DSP ASE instructions (such as lwx) in
+# code paths where we cannot check that the CPU we are running on supports it.
+# Proper abstraction using HAVE_AS_DSP and macros is done in
+# arch/mips/include/asm/mipsregs.h.
+#
+ifeq ($(CONFIG_CPU_MIPSR2), y)
+CFLAGS_DSP 			= -DHAVE_AS_DSP
+
+CFLAGS_signal.o			= $(CFLAGS_DSP)
+CFLAGS_signal32.o		= $(CFLAGS_DSP)
+CFLAGS_process.o		= $(CFLAGS_DSP)
+CFLAGS_branch.o			= $(CFLAGS_DSP)
+CFLAGS_ptrace.o			= $(CFLAGS_DSP)
+endif
+
+CPPFLAGS_vmlinux.lds		:= $(KBUILD_CFLAGS)
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
new file mode 100644
index 000000000..beabe19ff
--- /dev/null
+++ b/arch/mips/kernel/asm-offsets.c
@@ -0,0 +1,468 @@
+/*
+ * offset.c: Calculate pt_regs and task_struct offsets.
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ *
+ * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#include <linux/compat.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/kbuild.h>
+#include <linux/suspend.h>
+#include <asm/pm.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/smp-cps.h>
+
+#include <linux/kvm_host.h>
+
+void output_ptreg_defines(void)
+{
+	COMMENT("MIPS pt_regs offsets.");
+	OFFSET(PT_R0, pt_regs, regs[0]);
+	OFFSET(PT_R1, pt_regs, regs[1]);
+	OFFSET(PT_R2, pt_regs, regs[2]);
+	OFFSET(PT_R3, pt_regs, regs[3]);
+	OFFSET(PT_R4, pt_regs, regs[4]);
+	OFFSET(PT_R5, pt_regs, regs[5]);
+	OFFSET(PT_R6, pt_regs, regs[6]);
+	OFFSET(PT_R7, pt_regs, regs[7]);
+	OFFSET(PT_R8, pt_regs, regs[8]);
+	OFFSET(PT_R9, pt_regs, regs[9]);
+	OFFSET(PT_R10, pt_regs, regs[10]);
+	OFFSET(PT_R11, pt_regs, regs[11]);
+	OFFSET(PT_R12, pt_regs, regs[12]);
+	OFFSET(PT_R13, pt_regs, regs[13]);
+	OFFSET(PT_R14, pt_regs, regs[14]);
+	OFFSET(PT_R15, pt_regs, regs[15]);
+	OFFSET(PT_R16, pt_regs, regs[16]);
+	OFFSET(PT_R17, pt_regs, regs[17]);
+	OFFSET(PT_R18, pt_regs, regs[18]);
+	OFFSET(PT_R19, pt_regs, regs[19]);
+	OFFSET(PT_R20, pt_regs, regs[20]);
+	OFFSET(PT_R21, pt_regs, regs[21]);
+	OFFSET(PT_R22, pt_regs, regs[22]);
+	OFFSET(PT_R23, pt_regs, regs[23]);
+	OFFSET(PT_R24, pt_regs, regs[24]);
+	OFFSET(PT_R25, pt_regs, regs[25]);
+	OFFSET(PT_R26, pt_regs, regs[26]);
+	OFFSET(PT_R27, pt_regs, regs[27]);
+	OFFSET(PT_R28, pt_regs, regs[28]);
+	OFFSET(PT_R29, pt_regs, regs[29]);
+	OFFSET(PT_R30, pt_regs, regs[30]);
+	OFFSET(PT_R31, pt_regs, regs[31]);
+	OFFSET(PT_LO, pt_regs, lo);
+	OFFSET(PT_HI, pt_regs, hi);
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	OFFSET(PT_ACX, pt_regs, acx);
+#endif
+	OFFSET(PT_EPC, pt_regs, cp0_epc);
+	OFFSET(PT_BVADDR, pt_regs, cp0_badvaddr);
+	OFFSET(PT_STATUS, pt_regs, cp0_status);
+	OFFSET(PT_CAUSE, pt_regs, cp0_cause);
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	OFFSET(PT_MPL, pt_regs, mpl);
+	OFFSET(PT_MTP, pt_regs, mtp);
+#endif /* CONFIG_CPU_CAVIUM_OCTEON */
+	DEFINE(PT_SIZE, sizeof(struct pt_regs));
+	BLANK();
+}
+
+void output_task_defines(void)
+{
+	COMMENT("MIPS task_struct offsets.");
+	OFFSET(TASK_STATE, task_struct, state);
+	OFFSET(TASK_THREAD_INFO, task_struct, stack);
+	OFFSET(TASK_FLAGS, task_struct, flags);
+	OFFSET(TASK_MM, task_struct, mm);
+	OFFSET(TASK_PID, task_struct, pid);
+#if defined(CONFIG_CC_STACKPROTECTOR)
+	OFFSET(TASK_STACK_CANARY, task_struct, stack_canary);
+#endif
+	DEFINE(TASK_STRUCT_SIZE, sizeof(struct task_struct));
+	BLANK();
+}
+
+void output_thread_info_defines(void)
+{
+	COMMENT("MIPS thread_info offsets.");
+	OFFSET(TI_TASK, thread_info, task);
+	OFFSET(TI_FLAGS, thread_info, flags);
+	OFFSET(TI_TP_VALUE, thread_info, tp_value);
+	OFFSET(TI_CPU, thread_info, cpu);
+	OFFSET(TI_PRE_COUNT, thread_info, preempt_count);
+	OFFSET(TI_R2_EMUL_RET, thread_info, r2_emul_return);
+	OFFSET(TI_ADDR_LIMIT, thread_info, addr_limit);
+	OFFSET(TI_REGS, thread_info, regs);
+	DEFINE(_THREAD_SIZE, THREAD_SIZE);
+	DEFINE(_THREAD_MASK, THREAD_MASK);
+	BLANK();
+}
+
+void output_thread_defines(void)
+{
+	COMMENT("MIPS specific thread_struct offsets.");
+	OFFSET(THREAD_REG16, task_struct, thread.reg16);
+	OFFSET(THREAD_REG17, task_struct, thread.reg17);
+	OFFSET(THREAD_REG18, task_struct, thread.reg18);
+	OFFSET(THREAD_REG19, task_struct, thread.reg19);
+	OFFSET(THREAD_REG20, task_struct, thread.reg20);
+	OFFSET(THREAD_REG21, task_struct, thread.reg21);
+	OFFSET(THREAD_REG22, task_struct, thread.reg22);
+	OFFSET(THREAD_REG23, task_struct, thread.reg23);
+	OFFSET(THREAD_REG29, task_struct, thread.reg29);
+	OFFSET(THREAD_REG30, task_struct, thread.reg30);
+	OFFSET(THREAD_REG31, task_struct, thread.reg31);
+	OFFSET(THREAD_STATUS, task_struct,
+	       thread.cp0_status);
+	OFFSET(THREAD_FPU, task_struct, thread.fpu);
+
+	OFFSET(THREAD_BVADDR, task_struct, \
+	       thread.cp0_badvaddr);
+	OFFSET(THREAD_BUADDR, task_struct, \
+	       thread.cp0_baduaddr);
+	OFFSET(THREAD_ECODE, task_struct, \
+	       thread.error_code);
+	BLANK();
+}
+
+void output_thread_fpu_defines(void)
+{
+	OFFSET(THREAD_FPR0, task_struct, thread.fpu.fpr[0]);
+	OFFSET(THREAD_FPR1, task_struct, thread.fpu.fpr[1]);
+	OFFSET(THREAD_FPR2, task_struct, thread.fpu.fpr[2]);
+	OFFSET(THREAD_FPR3, task_struct, thread.fpu.fpr[3]);
+	OFFSET(THREAD_FPR4, task_struct, thread.fpu.fpr[4]);
+	OFFSET(THREAD_FPR5, task_struct, thread.fpu.fpr[5]);
+	OFFSET(THREAD_FPR6, task_struct, thread.fpu.fpr[6]);
+	OFFSET(THREAD_FPR7, task_struct, thread.fpu.fpr[7]);
+	OFFSET(THREAD_FPR8, task_struct, thread.fpu.fpr[8]);
+	OFFSET(THREAD_FPR9, task_struct, thread.fpu.fpr[9]);
+	OFFSET(THREAD_FPR10, task_struct, thread.fpu.fpr[10]);
+	OFFSET(THREAD_FPR11, task_struct, thread.fpu.fpr[11]);
+	OFFSET(THREAD_FPR12, task_struct, thread.fpu.fpr[12]);
+	OFFSET(THREAD_FPR13, task_struct, thread.fpu.fpr[13]);
+	OFFSET(THREAD_FPR14, task_struct, thread.fpu.fpr[14]);
+	OFFSET(THREAD_FPR15, task_struct, thread.fpu.fpr[15]);
+	OFFSET(THREAD_FPR16, task_struct, thread.fpu.fpr[16]);
+	OFFSET(THREAD_FPR17, task_struct, thread.fpu.fpr[17]);
+	OFFSET(THREAD_FPR18, task_struct, thread.fpu.fpr[18]);
+	OFFSET(THREAD_FPR19, task_struct, thread.fpu.fpr[19]);
+	OFFSET(THREAD_FPR20, task_struct, thread.fpu.fpr[20]);
+	OFFSET(THREAD_FPR21, task_struct, thread.fpu.fpr[21]);
+	OFFSET(THREAD_FPR22, task_struct, thread.fpu.fpr[22]);
+	OFFSET(THREAD_FPR23, task_struct, thread.fpu.fpr[23]);
+	OFFSET(THREAD_FPR24, task_struct, thread.fpu.fpr[24]);
+	OFFSET(THREAD_FPR25, task_struct, thread.fpu.fpr[25]);
+	OFFSET(THREAD_FPR26, task_struct, thread.fpu.fpr[26]);
+	OFFSET(THREAD_FPR27, task_struct, thread.fpu.fpr[27]);
+	OFFSET(THREAD_FPR28, task_struct, thread.fpu.fpr[28]);
+	OFFSET(THREAD_FPR29, task_struct, thread.fpu.fpr[29]);
+	OFFSET(THREAD_FPR30, task_struct, thread.fpu.fpr[30]);
+	OFFSET(THREAD_FPR31, task_struct, thread.fpu.fpr[31]);
+
+	OFFSET(THREAD_FCR31, task_struct, thread.fpu.fcr31);
+	OFFSET(THREAD_MSA_CSR, task_struct, thread.fpu.msacsr);
+	BLANK();
+}
+
+void output_mm_defines(void)
+{
+	COMMENT("Size of struct page");
+	DEFINE(STRUCT_PAGE_SIZE, sizeof(struct page));
+	BLANK();
+	COMMENT("Linux mm_struct offsets.");
+	OFFSET(MM_USERS, mm_struct, mm_users);
+	OFFSET(MM_PGD, mm_struct, pgd);
+	OFFSET(MM_CONTEXT, mm_struct, context);
+	BLANK();
+	DEFINE(_PGD_T_SIZE, sizeof(pgd_t));
+	DEFINE(_PMD_T_SIZE, sizeof(pmd_t));
+	DEFINE(_PTE_T_SIZE, sizeof(pte_t));
+	BLANK();
+	DEFINE(_PGD_T_LOG2, PGD_T_LOG2);
+#ifndef __PAGETABLE_PMD_FOLDED
+	DEFINE(_PMD_T_LOG2, PMD_T_LOG2);
+#endif
+	DEFINE(_PTE_T_LOG2, PTE_T_LOG2);
+	BLANK();
+	DEFINE(_PGD_ORDER, PGD_ORDER);
+#ifndef __PAGETABLE_PMD_FOLDED
+	DEFINE(_PMD_ORDER, PMD_ORDER);
+#endif
+	DEFINE(_PTE_ORDER, PTE_ORDER);
+	BLANK();
+	DEFINE(_PMD_SHIFT, PMD_SHIFT);
+	DEFINE(_PGDIR_SHIFT, PGDIR_SHIFT);
+	BLANK();
+	DEFINE(_PTRS_PER_PGD, PTRS_PER_PGD);
+	DEFINE(_PTRS_PER_PMD, PTRS_PER_PMD);
+	DEFINE(_PTRS_PER_PTE, PTRS_PER_PTE);
+	BLANK();
+	DEFINE(_PAGE_SHIFT, PAGE_SHIFT);
+	DEFINE(_PAGE_SIZE, PAGE_SIZE);
+	BLANK();
+}
+
+#ifdef CONFIG_32BIT
+void output_sc_defines(void)
+{
+	COMMENT("Linux sigcontext offsets.");
+	OFFSET(SC_REGS, sigcontext, sc_regs);
+	OFFSET(SC_FPREGS, sigcontext, sc_fpregs);
+	OFFSET(SC_ACX, sigcontext, sc_acx);
+	OFFSET(SC_MDHI, sigcontext, sc_mdhi);
+	OFFSET(SC_MDLO, sigcontext, sc_mdlo);
+	OFFSET(SC_PC, sigcontext, sc_pc);
+	OFFSET(SC_FPC_CSR, sigcontext, sc_fpc_csr);
+	OFFSET(SC_FPC_EIR, sigcontext, sc_fpc_eir);
+	OFFSET(SC_HI1, sigcontext, sc_hi1);
+	OFFSET(SC_LO1, sigcontext, sc_lo1);
+	OFFSET(SC_HI2, sigcontext, sc_hi2);
+	OFFSET(SC_LO2, sigcontext, sc_lo2);
+	OFFSET(SC_HI3, sigcontext, sc_hi3);
+	OFFSET(SC_LO3, sigcontext, sc_lo3);
+	BLANK();
+}
+#endif
+
+#ifdef CONFIG_64BIT
+void output_sc_defines(void)
+{
+	COMMENT("Linux sigcontext offsets.");
+	OFFSET(SC_REGS, sigcontext, sc_regs);
+	OFFSET(SC_FPREGS, sigcontext, sc_fpregs);
+	OFFSET(SC_MDHI, sigcontext, sc_mdhi);
+	OFFSET(SC_MDLO, sigcontext, sc_mdlo);
+	OFFSET(SC_PC, sigcontext, sc_pc);
+	OFFSET(SC_FPC_CSR, sigcontext, sc_fpc_csr);
+	BLANK();
+}
+#endif
+
+#ifdef CONFIG_MIPS32_COMPAT
+void output_sc32_defines(void)
+{
+	COMMENT("Linux 32-bit sigcontext offsets.");
+	OFFSET(SC32_FPREGS, sigcontext32, sc_fpregs);
+	OFFSET(SC32_FPC_CSR, sigcontext32, sc_fpc_csr);
+	OFFSET(SC32_FPC_EIR, sigcontext32, sc_fpc_eir);
+	BLANK();
+}
+#endif
+
+void output_signal_defined(void)
+{
+	COMMENT("Linux signal numbers.");
+	DEFINE(_SIGHUP, SIGHUP);
+	DEFINE(_SIGINT, SIGINT);
+	DEFINE(_SIGQUIT, SIGQUIT);
+	DEFINE(_SIGILL, SIGILL);
+	DEFINE(_SIGTRAP, SIGTRAP);
+	DEFINE(_SIGIOT, SIGIOT);
+	DEFINE(_SIGABRT, SIGABRT);
+	DEFINE(_SIGEMT, SIGEMT);
+	DEFINE(_SIGFPE, SIGFPE);
+	DEFINE(_SIGKILL, SIGKILL);
+	DEFINE(_SIGBUS, SIGBUS);
+	DEFINE(_SIGSEGV, SIGSEGV);
+	DEFINE(_SIGSYS, SIGSYS);
+	DEFINE(_SIGPIPE, SIGPIPE);
+	DEFINE(_SIGALRM, SIGALRM);
+	DEFINE(_SIGTERM, SIGTERM);
+	DEFINE(_SIGUSR1, SIGUSR1);
+	DEFINE(_SIGUSR2, SIGUSR2);
+	DEFINE(_SIGCHLD, SIGCHLD);
+	DEFINE(_SIGPWR, SIGPWR);
+	DEFINE(_SIGWINCH, SIGWINCH);
+	DEFINE(_SIGURG, SIGURG);
+	DEFINE(_SIGIO, SIGIO);
+	DEFINE(_SIGSTOP, SIGSTOP);
+	DEFINE(_SIGTSTP, SIGTSTP);
+	DEFINE(_SIGCONT, SIGCONT);
+	DEFINE(_SIGTTIN, SIGTTIN);
+	DEFINE(_SIGTTOU, SIGTTOU);
+	DEFINE(_SIGVTALRM, SIGVTALRM);
+	DEFINE(_SIGPROF, SIGPROF);
+	DEFINE(_SIGXCPU, SIGXCPU);
+	DEFINE(_SIGXFSZ, SIGXFSZ);
+	BLANK();
+}
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+void output_octeon_cop2_state_defines(void)
+{
+	COMMENT("Octeon specific octeon_cop2_state offsets.");
+	OFFSET(OCTEON_CP2_CRC_IV,	octeon_cop2_state, cop2_crc_iv);
+	OFFSET(OCTEON_CP2_CRC_LENGTH,	octeon_cop2_state, cop2_crc_length);
+	OFFSET(OCTEON_CP2_CRC_POLY,	octeon_cop2_state, cop2_crc_poly);
+	OFFSET(OCTEON_CP2_LLM_DAT,	octeon_cop2_state, cop2_llm_dat);
+	OFFSET(OCTEON_CP2_3DES_IV,	octeon_cop2_state, cop2_3des_iv);
+	OFFSET(OCTEON_CP2_3DES_KEY,	octeon_cop2_state, cop2_3des_key);
+	OFFSET(OCTEON_CP2_3DES_RESULT,	octeon_cop2_state, cop2_3des_result);
+	OFFSET(OCTEON_CP2_AES_INP0,	octeon_cop2_state, cop2_aes_inp0);
+	OFFSET(OCTEON_CP2_AES_IV,	octeon_cop2_state, cop2_aes_iv);
+	OFFSET(OCTEON_CP2_AES_KEY,	octeon_cop2_state, cop2_aes_key);
+	OFFSET(OCTEON_CP2_AES_KEYLEN,	octeon_cop2_state, cop2_aes_keylen);
+	OFFSET(OCTEON_CP2_AES_RESULT,	octeon_cop2_state, cop2_aes_result);
+	OFFSET(OCTEON_CP2_GFM_MULT,	octeon_cop2_state, cop2_gfm_mult);
+	OFFSET(OCTEON_CP2_GFM_POLY,	octeon_cop2_state, cop2_gfm_poly);
+	OFFSET(OCTEON_CP2_GFM_RESULT,	octeon_cop2_state, cop2_gfm_result);
+	OFFSET(OCTEON_CP2_HSH_DATW,	octeon_cop2_state, cop2_hsh_datw);
+	OFFSET(OCTEON_CP2_HSH_IVW,	octeon_cop2_state, cop2_hsh_ivw);
+	OFFSET(OCTEON_CP2_SHA3,		octeon_cop2_state, cop2_sha3);
+	OFFSET(THREAD_CP2,	task_struct, thread.cp2);
+	OFFSET(THREAD_CVMSEG,	task_struct, thread.cvmseg.cvmseg);
+	BLANK();
+}
+#endif
+
+#ifdef CONFIG_HIBERNATION
+void output_pbe_defines(void)
+{
+	COMMENT(" Linux struct pbe offsets. ");
+	OFFSET(PBE_ADDRESS, pbe, address);
+	OFFSET(PBE_ORIG_ADDRESS, pbe, orig_address);
+	OFFSET(PBE_NEXT, pbe, next);
+	DEFINE(PBE_SIZE, sizeof(struct pbe));
+	BLANK();
+}
+#endif
+
+#ifdef CONFIG_CPU_PM
+void output_pm_defines(void)
+{
+	COMMENT(" PM offsets. ");
+#ifdef CONFIG_EVA
+	OFFSET(SSS_SEGCTL0,	mips_static_suspend_state, segctl[0]);
+	OFFSET(SSS_SEGCTL1,	mips_static_suspend_state, segctl[1]);
+	OFFSET(SSS_SEGCTL2,	mips_static_suspend_state, segctl[2]);
+#endif
+	OFFSET(SSS_SP,		mips_static_suspend_state, sp);
+	BLANK();
+}
+#endif
+
+void output_kvm_defines(void)
+{
+	COMMENT(" KVM/MIPS Specfic offsets. ");
+	DEFINE(VCPU_ARCH_SIZE, sizeof(struct kvm_vcpu_arch));
+	OFFSET(VCPU_RUN, kvm_vcpu, run);
+	OFFSET(VCPU_HOST_ARCH, kvm_vcpu, arch);
+
+	OFFSET(VCPU_HOST_EBASE, kvm_vcpu_arch, host_ebase);
+	OFFSET(VCPU_GUEST_EBASE, kvm_vcpu_arch, guest_ebase);
+
+	OFFSET(VCPU_HOST_STACK, kvm_vcpu_arch, host_stack);
+	OFFSET(VCPU_HOST_GP, kvm_vcpu_arch, host_gp);
+
+	OFFSET(VCPU_HOST_CP0_BADVADDR, kvm_vcpu_arch, host_cp0_badvaddr);
+	OFFSET(VCPU_HOST_CP0_CAUSE, kvm_vcpu_arch, host_cp0_cause);
+	OFFSET(VCPU_HOST_EPC, kvm_vcpu_arch, host_cp0_epc);
+	OFFSET(VCPU_HOST_ENTRYHI, kvm_vcpu_arch, host_cp0_entryhi);
+
+	OFFSET(VCPU_GUEST_INST, kvm_vcpu_arch, guest_inst);
+
+	OFFSET(VCPU_R0, kvm_vcpu_arch, gprs[0]);
+	OFFSET(VCPU_R1, kvm_vcpu_arch, gprs[1]);
+	OFFSET(VCPU_R2, kvm_vcpu_arch, gprs[2]);
+	OFFSET(VCPU_R3, kvm_vcpu_arch, gprs[3]);
+	OFFSET(VCPU_R4, kvm_vcpu_arch, gprs[4]);
+	OFFSET(VCPU_R5, kvm_vcpu_arch, gprs[5]);
+	OFFSET(VCPU_R6, kvm_vcpu_arch, gprs[6]);
+	OFFSET(VCPU_R7, kvm_vcpu_arch, gprs[7]);
+	OFFSET(VCPU_R8, kvm_vcpu_arch, gprs[8]);
+	OFFSET(VCPU_R9, kvm_vcpu_arch, gprs[9]);
+	OFFSET(VCPU_R10, kvm_vcpu_arch, gprs[10]);
+	OFFSET(VCPU_R11, kvm_vcpu_arch, gprs[11]);
+	OFFSET(VCPU_R12, kvm_vcpu_arch, gprs[12]);
+	OFFSET(VCPU_R13, kvm_vcpu_arch, gprs[13]);
+	OFFSET(VCPU_R14, kvm_vcpu_arch, gprs[14]);
+	OFFSET(VCPU_R15, kvm_vcpu_arch, gprs[15]);
+	OFFSET(VCPU_R16, kvm_vcpu_arch, gprs[16]);
+	OFFSET(VCPU_R17, kvm_vcpu_arch, gprs[17]);
+	OFFSET(VCPU_R18, kvm_vcpu_arch, gprs[18]);
+	OFFSET(VCPU_R19, kvm_vcpu_arch, gprs[19]);
+	OFFSET(VCPU_R20, kvm_vcpu_arch, gprs[20]);
+	OFFSET(VCPU_R21, kvm_vcpu_arch, gprs[21]);
+	OFFSET(VCPU_R22, kvm_vcpu_arch, gprs[22]);
+	OFFSET(VCPU_R23, kvm_vcpu_arch, gprs[23]);
+	OFFSET(VCPU_R24, kvm_vcpu_arch, gprs[24]);
+	OFFSET(VCPU_R25, kvm_vcpu_arch, gprs[25]);
+	OFFSET(VCPU_R26, kvm_vcpu_arch, gprs[26]);
+	OFFSET(VCPU_R27, kvm_vcpu_arch, gprs[27]);
+	OFFSET(VCPU_R28, kvm_vcpu_arch, gprs[28]);
+	OFFSET(VCPU_R29, kvm_vcpu_arch, gprs[29]);
+	OFFSET(VCPU_R30, kvm_vcpu_arch, gprs[30]);
+	OFFSET(VCPU_R31, kvm_vcpu_arch, gprs[31]);
+	OFFSET(VCPU_LO, kvm_vcpu_arch, lo);
+	OFFSET(VCPU_HI, kvm_vcpu_arch, hi);
+	OFFSET(VCPU_PC, kvm_vcpu_arch, pc);
+	BLANK();
+
+	OFFSET(VCPU_FPR0, kvm_vcpu_arch, fpu.fpr[0]);
+	OFFSET(VCPU_FPR1, kvm_vcpu_arch, fpu.fpr[1]);
+	OFFSET(VCPU_FPR2, kvm_vcpu_arch, fpu.fpr[2]);
+	OFFSET(VCPU_FPR3, kvm_vcpu_arch, fpu.fpr[3]);
+	OFFSET(VCPU_FPR4, kvm_vcpu_arch, fpu.fpr[4]);
+	OFFSET(VCPU_FPR5, kvm_vcpu_arch, fpu.fpr[5]);
+	OFFSET(VCPU_FPR6, kvm_vcpu_arch, fpu.fpr[6]);
+	OFFSET(VCPU_FPR7, kvm_vcpu_arch, fpu.fpr[7]);
+	OFFSET(VCPU_FPR8, kvm_vcpu_arch, fpu.fpr[8]);
+	OFFSET(VCPU_FPR9, kvm_vcpu_arch, fpu.fpr[9]);
+	OFFSET(VCPU_FPR10, kvm_vcpu_arch, fpu.fpr[10]);
+	OFFSET(VCPU_FPR11, kvm_vcpu_arch, fpu.fpr[11]);
+	OFFSET(VCPU_FPR12, kvm_vcpu_arch, fpu.fpr[12]);
+	OFFSET(VCPU_FPR13, kvm_vcpu_arch, fpu.fpr[13]);
+	OFFSET(VCPU_FPR14, kvm_vcpu_arch, fpu.fpr[14]);
+	OFFSET(VCPU_FPR15, kvm_vcpu_arch, fpu.fpr[15]);
+	OFFSET(VCPU_FPR16, kvm_vcpu_arch, fpu.fpr[16]);
+	OFFSET(VCPU_FPR17, kvm_vcpu_arch, fpu.fpr[17]);
+	OFFSET(VCPU_FPR18, kvm_vcpu_arch, fpu.fpr[18]);
+	OFFSET(VCPU_FPR19, kvm_vcpu_arch, fpu.fpr[19]);
+	OFFSET(VCPU_FPR20, kvm_vcpu_arch, fpu.fpr[20]);
+	OFFSET(VCPU_FPR21, kvm_vcpu_arch, fpu.fpr[21]);
+	OFFSET(VCPU_FPR22, kvm_vcpu_arch, fpu.fpr[22]);
+	OFFSET(VCPU_FPR23, kvm_vcpu_arch, fpu.fpr[23]);
+	OFFSET(VCPU_FPR24, kvm_vcpu_arch, fpu.fpr[24]);
+	OFFSET(VCPU_FPR25, kvm_vcpu_arch, fpu.fpr[25]);
+	OFFSET(VCPU_FPR26, kvm_vcpu_arch, fpu.fpr[26]);
+	OFFSET(VCPU_FPR27, kvm_vcpu_arch, fpu.fpr[27]);
+	OFFSET(VCPU_FPR28, kvm_vcpu_arch, fpu.fpr[28]);
+	OFFSET(VCPU_FPR29, kvm_vcpu_arch, fpu.fpr[29]);
+	OFFSET(VCPU_FPR30, kvm_vcpu_arch, fpu.fpr[30]);
+	OFFSET(VCPU_FPR31, kvm_vcpu_arch, fpu.fpr[31]);
+
+	OFFSET(VCPU_FCR31, kvm_vcpu_arch, fpu.fcr31);
+	OFFSET(VCPU_MSA_CSR, kvm_vcpu_arch, fpu.msacsr);
+	BLANK();
+
+	OFFSET(VCPU_COP0, kvm_vcpu_arch, cop0);
+	OFFSET(VCPU_GUEST_KERNEL_ASID, kvm_vcpu_arch, guest_kernel_asid);
+	OFFSET(VCPU_GUEST_USER_ASID, kvm_vcpu_arch, guest_user_asid);
+
+	OFFSET(COP0_TLB_HI, mips_coproc, reg[MIPS_CP0_TLB_HI][0]);
+	OFFSET(COP0_STATUS, mips_coproc, reg[MIPS_CP0_STATUS][0]);
+	BLANK();
+}
+
+#ifdef CONFIG_MIPS_CPS
+void output_cps_defines(void)
+{
+	COMMENT(" MIPS CPS offsets. ");
+
+	OFFSET(COREBOOTCFG_VPEMASK, core_boot_config, vpe_mask);
+	OFFSET(COREBOOTCFG_VPECONFIG, core_boot_config, vpe_config);
+	DEFINE(COREBOOTCFG_SIZE, sizeof(struct core_boot_config));
+
+	OFFSET(VPEBOOTCFG_PC, vpe_boot_config, pc);
+	OFFSET(VPEBOOTCFG_SP, vpe_boot_config, sp);
+	OFFSET(VPEBOOTCFG_GP, vpe_boot_config, gp);
+	DEFINE(VPEBOOTCFG_SIZE, sizeof(struct vpe_boot_config));
+}
+#endif
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
new file mode 100644
index 000000000..1188e00bb
--- /dev/null
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -0,0 +1,133 @@
+/*
+ * Support for n32 Linux/MIPS ELF binaries.
+ *
+ * Copyright (C) 1999, 2001 Ralf Baechle
+ * Copyright (C) 1999, 2001 Silicon Graphics, Inc.
+ *
+ * Heavily inspired by the 32-bit Sparc compat code which is
+ * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek	(jj@ultra.linux.cz)
+ */
+
+#define ELF_ARCH		EM_MIPS
+#define ELF_CLASS		ELFCLASS32
+#ifdef __MIPSEB__
+#define ELF_DATA		ELFDATA2MSB;
+#else /* __MIPSEL__ */
+#define ELF_DATA		ELFDATA2LSB;
+#endif
+
+/* ELF register definitions */
+#define ELF_NGREG	45
+#define ELF_NFPREG	33
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr)						\
+({									\
+	int __res = 1;							\
+	struct elfhdr *__h = (hdr);					\
+									\
+	if (__h->e_machine != EM_MIPS)					\
+		__res = 0;						\
+	if (__h->e_ident[EI_CLASS] != ELFCLASS32)			\
+		__res = 0;						\
+	if (((__h->e_flags & EF_MIPS_ABI2) == 0) ||			\
+	    ((__h->e_flags & EF_MIPS_ABI) != 0))			\
+		__res = 0;						\
+									\
+	__res;								\
+})
+
+#define TASK32_SIZE		0x7fff8000UL
+#undef ELF_ET_DYN_BASE
+#define ELF_ET_DYN_BASE		(TASK32_SIZE / 3 * 2)
+
+#include <asm/processor.h>
+#include <linux/module.h>
+#include <linux/elfcore.h>
+#include <linux/compat.h>
+#include <linux/math64.h>
+
+#define elf_prstatus elf_prstatus32
+struct elf_prstatus32
+{
+	struct elf_siginfo pr_info;	/* Info associated with signal */
+	short	pr_cursig;		/* Current signal */
+	unsigned int pr_sigpend;	/* Set of pending signals */
+	unsigned int pr_sighold;	/* Set of held signals */
+	pid_t	pr_pid;
+	pid_t	pr_ppid;
+	pid_t	pr_pgrp;
+	pid_t	pr_sid;
+	struct compat_timeval pr_utime; /* User time */
+	struct compat_timeval pr_stime; /* System time */
+	struct compat_timeval pr_cutime;/* Cumulative user time */
+	struct compat_timeval pr_cstime;/* Cumulative system time */
+	elf_gregset_t pr_reg;	/* GP registers */
+	int pr_fpvalid;		/* True if math co-processor being used.  */
+};
+
+#define elf_prpsinfo elf_prpsinfo32
+struct elf_prpsinfo32
+{
+	char	pr_state;	/* numeric process state */
+	char	pr_sname;	/* char for pr_state */
+	char	pr_zomb;	/* zombie */
+	char	pr_nice;	/* nice val */
+	unsigned int pr_flag;	/* flags */
+	__kernel_uid_t	pr_uid;
+	__kernel_gid_t	pr_gid;
+	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
+	/* Lots missing */
+	char	pr_fname[16];	/* filename of executable */
+	char	pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */
+};
+
+#define elf_caddr_t	u32
+#define init_elf_binfmt init_elfn32_binfmt
+
+#define jiffies_to_timeval jiffies_to_compat_timeval
+static __inline__ void
+jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
+{
+	/*
+	 * Convert jiffies to nanoseconds and separate with
+	 * one divide.
+	 */
+	u64 nsec = (u64)jiffies * TICK_NSEC;
+	u32 rem;
+	value->tv_sec = div_u64_rem(nsec, NSEC_PER_SEC, &rem);
+	value->tv_usec = rem / NSEC_PER_USEC;
+}
+
+#define ELF_CORE_EFLAGS EF_MIPS_ABI2
+
+MODULE_DESCRIPTION("Binary format loader for compatibility with n32 Linux/MIPS binaries");
+MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
+
+#undef MODULE_DESCRIPTION
+#undef MODULE_AUTHOR
+
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
+#undef cputime_to_timeval
+#define cputime_to_timeval cputime_to_compat_timeval
+static __inline__ void
+cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value)
+{
+	unsigned long jiffies = cputime_to_jiffies(cputime);
+
+	value->tv_usec = (jiffies % HZ) * (1000000L / HZ);
+	value->tv_sec = jiffies / HZ;
+}
+
+#include "../../../fs/binfmt_elf.c"
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
new file mode 100644
index 000000000..928767858
--- /dev/null
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -0,0 +1,152 @@
+/*
+ * Support for o32 Linux/MIPS ELF binaries.
+ *
+ * Copyright (C) 1999, 2001 Ralf Baechle
+ * Copyright (C) 1999, 2001 Silicon Graphics, Inc.
+ *
+ * Heavily inspired by the 32-bit Sparc compat code which is
+ * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek	(jj@ultra.linux.cz)
+ */
+
+#define ELF_ARCH		EM_MIPS
+#define ELF_CLASS		ELFCLASS32
+#ifdef __MIPSEB__
+#define ELF_DATA		ELFDATA2MSB;
+#else /* __MIPSEL__ */
+#define ELF_DATA		ELFDATA2LSB;
+#endif
+
+/* ELF register definitions */
+#define ELF_NGREG	45
+#define ELF_NFPREG	33
+
+typedef unsigned int elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/*
+ * In order to be sure that we don't attempt to execute an O32 binary which
+ * requires 64 bit FP (FR=1) on a system which does not support it we refuse
+ * to execute any binary which has bits specified by the following macro set
+ * in its ELF header flags.
+ */
+#ifdef CONFIG_MIPS_O32_FP64_SUPPORT
+# define __MIPS_O32_FP64_MUST_BE_ZERO	0
+#else
+# define __MIPS_O32_FP64_MUST_BE_ZERO	EF_MIPS_FP64
+#endif
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr)						\
+({									\
+	int __res = 1;							\
+	struct elfhdr *__h = (hdr);					\
+									\
+	if (__h->e_machine != EM_MIPS)					\
+		__res = 0;						\
+	if (__h->e_ident[EI_CLASS] != ELFCLASS32)			\
+		__res = 0;						\
+	if ((__h->e_flags & EF_MIPS_ABI2) != 0)				\
+		__res = 0;						\
+	if (((__h->e_flags & EF_MIPS_ABI) != 0) &&			\
+	    ((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32))		\
+		__res = 0;						\
+	if (__h->e_flags & __MIPS_O32_FP64_MUST_BE_ZERO)		\
+		__res = 0;						\
+									\
+	__res;								\
+})
+
+#ifdef CONFIG_KVM_GUEST
+#define TASK32_SIZE		0x3fff8000UL
+#else
+#define TASK32_SIZE		0x7fff8000UL
+#endif
+#undef ELF_ET_DYN_BASE
+#define ELF_ET_DYN_BASE		(TASK32_SIZE / 3 * 2)
+
+#include <asm/processor.h>
+
+#include <linux/module.h>
+#include <linux/elfcore.h>
+#include <linux/compat.h>
+#include <linux/math64.h>
+
+#define elf_prstatus elf_prstatus32
+struct elf_prstatus32
+{
+	struct elf_siginfo pr_info;	/* Info associated with signal */
+	short	pr_cursig;		/* Current signal */
+	unsigned int pr_sigpend;	/* Set of pending signals */
+	unsigned int pr_sighold;	/* Set of held signals */
+	pid_t	pr_pid;
+	pid_t	pr_ppid;
+	pid_t	pr_pgrp;
+	pid_t	pr_sid;
+	struct compat_timeval pr_utime; /* User time */
+	struct compat_timeval pr_stime; /* System time */
+	struct compat_timeval pr_cutime;/* Cumulative user time */
+	struct compat_timeval pr_cstime;/* Cumulative system time */
+	elf_gregset_t pr_reg;	/* GP registers */
+	int pr_fpvalid;		/* True if math co-processor being used.  */
+};
+
+#define elf_prpsinfo elf_prpsinfo32
+struct elf_prpsinfo32
+{
+	char	pr_state;	/* numeric process state */
+	char	pr_sname;	/* char for pr_state */
+	char	pr_zomb;	/* zombie */
+	char	pr_nice;	/* nice val */
+	unsigned int pr_flag;	/* flags */
+	__kernel_uid_t	pr_uid;
+	__kernel_gid_t	pr_gid;
+	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
+	/* Lots missing */
+	char	pr_fname[16];	/* filename of executable */
+	char	pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */
+};
+
+#define elf_caddr_t	u32
+#define init_elf_binfmt init_elf32_binfmt
+
+#define jiffies_to_timeval jiffies_to_compat_timeval
+static inline void
+jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
+{
+	/*
+	 * Convert jiffies to nanoseconds and separate with
+	 * one divide.
+	 */
+	u64 nsec = (u64)jiffies * TICK_NSEC;
+	u32 rem;
+	value->tv_sec = div_u64_rem(nsec, NSEC_PER_SEC, &rem);
+	value->tv_usec = rem / NSEC_PER_USEC;
+}
+
+MODULE_DESCRIPTION("Binary format loader for compatibility with o32 Linux/MIPS binaries");
+MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
+
+#undef MODULE_DESCRIPTION
+#undef MODULE_AUTHOR
+
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
+#undef cputime_to_timeval
+#define cputime_to_timeval cputime_to_compat_timeval
+static __inline__ void
+cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value)
+{
+	unsigned long jiffies = cputime_to_jiffies(cputime);
+
+	value->tv_usec = (jiffies % HZ) * (1000000L / HZ);
+	value->tv_sec = jiffies / HZ;
+}
+
+#include "../../../fs/binfmt_elf.c"
diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S
new file mode 100644
index 000000000..86495072a
--- /dev/null
+++ b/arch/mips/kernel/bmips_vec.S
@@ -0,0 +1,282 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com)
+ *
+ * Reset/NMI/re-entry vectors for BMIPS processors
+ */
+
+
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/cacheops.h>
+#include <asm/cpu.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+#include <asm/addrspace.h>
+#include <asm/hazards.h>
+#include <asm/bmips.h>
+
+	.macro	BARRIER
+	.set	mips32
+	_ssnop
+	_ssnop
+	_ssnop
+	.set	mips0
+	.endm
+
+/***********************************************************************
+ * Alternate CPU1 startup vector for BMIPS4350
+ *
+ * On some systems the bootloader has already started CPU1 and configured
+ * it to resume execution at 0x8000_0200 (!BEV IV vector) when it is
+ * triggered by the SW1 interrupt.  If that is the case we try to move
+ * it to a more convenient place: BMIPS_WARM_RESTART_VEC @ 0x8000_0380.
+ ***********************************************************************/
+
+LEAF(bmips_smp_movevec)
+	la	k0, 1f
+	li	k1, CKSEG1
+	or	k0, k1
+	jr	k0
+
+1:
+	/* clear IV, pending IPIs */
+	mtc0	zero, CP0_CAUSE
+
+	/* re-enable IRQs to wait for SW1 */
+	li	k0, ST0_IE | ST0_BEV | STATUSF_IP1
+	mtc0	k0, CP0_STATUS
+
+	/* set up CPU1 CBR; move BASE to 0xa000_0000 */
+	li	k0, 0xff400000
+	mtc0	k0, $22, 6
+	/* set up relocation vector address based on thread ID */
+	mfc0	k1, $22, 3
+	srl	k1, 16
+	andi	k1, 0x8000
+	or	k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_0
+	or	k0, k1
+	li	k1, 0xa0080000
+	sw	k1, 0(k0)
+
+	/* wait here for SW1 interrupt from bmips_boot_secondary() */
+	wait
+
+	la	k0, bmips_reset_nmi_vec
+	li	k1, CKSEG1
+	or	k0, k1
+	jr	k0
+END(bmips_smp_movevec)
+
+/***********************************************************************
+ * Reset/NMI vector
+ * For BMIPS processors that can relocate their exception vectors, this
+ * entire function gets copied to 0x8000_0000.
+ ***********************************************************************/
+
+NESTED(bmips_reset_nmi_vec, PT_SIZE, sp)
+	.set	push
+	.set	noat
+	.align	4
+
+#ifdef CONFIG_SMP
+	/* if the NMI bit is clear, assume this is a CPU1 reset instead */
+	li	k1, (1 << 19)
+	mfc0	k0, CP0_STATUS
+	and	k0, k1
+	beqz	k0, bmips_smp_entry
+
+#if defined(CONFIG_CPU_BMIPS5000)
+	mfc0	k0, CP0_PRID
+	li	k1, PRID_IMP_BMIPS5000
+	andi	k0, 0xff00
+	bne	k0, k1, 1f
+
+	/* if we're not on core 0, this must be the SMP boot signal */
+	li	k1, (3 << 25)
+	mfc0	k0, $22
+	and	k0, k1
+	bnez	k0, bmips_smp_entry
+1:
+#endif /* CONFIG_CPU_BMIPS5000 */
+#endif /* CONFIG_SMP */
+
+	/* nope, it's just a regular NMI */
+	SAVE_ALL
+	move	a0, sp
+
+	/* clear EXL, ERL, BEV so that TLB refills still work */
+	mfc0	k0, CP0_STATUS
+	li	k1, ST0_ERL | ST0_EXL | ST0_BEV | ST0_IE
+	or	k0, k1
+	xor	k0, k1
+	mtc0	k0, CP0_STATUS
+	BARRIER
+
+	/* jump to the NMI handler function */
+	la	k0, nmi_handler
+	jr	k0
+
+	RESTORE_ALL
+	.set	arch=r4000
+	eret
+
+/***********************************************************************
+ * CPU1 reset vector (used for the initial boot only)
+ * This is still part of bmips_reset_nmi_vec().
+ ***********************************************************************/
+
+#ifdef CONFIG_SMP
+
+bmips_smp_entry:
+
+	/* set up CP0 STATUS; enable FPU */
+	li	k0, 0x30000000
+	mtc0	k0, CP0_STATUS
+	BARRIER
+
+	/* set local CP0 CONFIG to make kseg0 cacheable, write-back */
+	mfc0	k0, CP0_CONFIG
+	ori	k0, 0x07
+	xori	k0, 0x04
+	mtc0	k0, CP0_CONFIG
+
+	mfc0	k0, CP0_PRID
+	andi	k0, 0xff00
+#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
+	li	k1, PRID_IMP_BMIPS43XX
+	bne	k0, k1, 2f
+
+	/* initialize CPU1's local I-cache */
+	li	k0, 0x80000000
+	li	k1, 0x80010000
+	mtc0	zero, $28
+	mtc0	zero, $28, 1
+	BARRIER
+
+1:	cache	Index_Store_Tag_I, 0(k0)
+	addiu	k0, 16
+	bne	k0, k1, 1b
+
+	b	3f
+2:
+#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */
+#if defined(CONFIG_CPU_BMIPS5000)
+	/* set exception vector base */
+	li	k1, PRID_IMP_BMIPS5000
+	bne	k0, k1, 3f
+
+	la	k0, ebase
+	lw	k0, 0(k0)
+	mtc0	k0, $15, 1
+	BARRIER
+#endif /* CONFIG_CPU_BMIPS5000 */
+3:
+	/* jump back to kseg0 in case we need to remap the kseg1 area */
+	la	k0, 1f
+	jr	k0
+1:
+	la	k0, bmips_enable_xks01
+	jalr	k0
+
+	/* use temporary stack to set up upper memory TLB */
+	li	sp, BMIPS_WARM_RESTART_VEC
+	la	k0, plat_wired_tlb_setup
+	jalr	k0
+
+	/* switch to permanent stack and continue booting */
+
+	.global bmips_secondary_reentry
+bmips_secondary_reentry:
+	la	k0, bmips_smp_boot_sp
+	lw	sp, 0(k0)
+	la	k0, bmips_smp_boot_gp
+	lw	gp, 0(k0)
+	la	k0, start_secondary
+	jr	k0
+
+#endif /* CONFIG_SMP */
+
+	.align	4
+	.global bmips_reset_nmi_vec_end
+bmips_reset_nmi_vec_end:
+
+END(bmips_reset_nmi_vec)
+
+	.set	pop
+
+/***********************************************************************
+ * CPU1 warm restart vector (used for second and subsequent boots).
+ * Also used for S2 standby recovery (PM).
+ * This entire function gets copied to (BMIPS_WARM_RESTART_VEC)
+ ***********************************************************************/
+
+LEAF(bmips_smp_int_vec)
+
+	.align	4
+	mfc0	k0, CP0_STATUS
+	ori	k0, 0x01
+	xori	k0, 0x01
+	mtc0	k0, CP0_STATUS
+	eret
+
+	.align	4
+	.global bmips_smp_int_vec_end
+bmips_smp_int_vec_end:
+
+END(bmips_smp_int_vec)
+
+/***********************************************************************
+ * XKS01 support
+ * Certain CPUs support extending kseg0 to 1024MB.
+ ***********************************************************************/
+
+LEAF(bmips_enable_xks01)
+
+#if defined(CONFIG_XKS01)
+	mfc0	t0, CP0_PRID
+	andi	t2, t0, 0xff00
+#if defined(CONFIG_CPU_BMIPS4380)
+	li	t1, PRID_IMP_BMIPS43XX
+	bne	t2, t1, 1f
+
+	andi	t0, 0xff
+	addiu	t1, t0, -PRID_REV_BMIPS4380_HI
+	bgtz	t1, 2f
+	addiu	t0, -PRID_REV_BMIPS4380_LO
+	bltz	t0, 2f
+
+	mfc0	t0, $22, 3
+	li	t1, 0x1ff0
+	li	t2, (1 << 12) | (1 << 9)
+	or	t0, t1
+	xor	t0, t1
+	or	t0, t2
+	mtc0	t0, $22, 3
+	BARRIER
+	b	2f
+1:
+#endif /* CONFIG_CPU_BMIPS4380 */
+#if defined(CONFIG_CPU_BMIPS5000)
+	li	t1, PRID_IMP_BMIPS5000
+	bne	t2, t1, 2f
+
+	mfc0	t0, $22, 5
+	li	t1, 0x01ff
+	li	t2, (1 << 8) | (1 << 5)
+	or	t0, t1
+	xor	t0, t1
+	or	t0, t2
+	mtc0	t0, $22, 5
+	BARRIER
+#endif /* CONFIG_CPU_BMIPS5000 */
+2:
+#endif /* defined(CONFIG_XKS01) */
+
+	jr	ra
+
+END(bmips_enable_xks01)
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
new file mode 100644
index 000000000..c0c5e5972
--- /dev/null
+++ b/arch/mips/kernel/branch.c
@@ -0,0 +1,880 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/module.h>
+#include <asm/branch.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/fpu.h>
+#include <asm/fpu_emulator.h>
+#include <asm/inst.h>
+#include <asm/mips-r2-to-r6-emul.h>
+#include <asm/ptrace.h>
+#include <asm/uaccess.h>
+
+/*
+ * Calculate and return exception PC in case of branch delay slot
+ * for microMIPS and MIPS16e. It does not clear the ISA mode bit.
+ */
+int __isa_exception_epc(struct pt_regs *regs)
+{
+	unsigned short inst;
+	long epc = regs->cp0_epc;
+
+	/* Calculate exception PC in branch delay slot. */
+	if (__get_user(inst, (u16 __user *) msk_isa16_mode(epc))) {
+		/* This should never happen because delay slot was checked. */
+		force_sig(SIGSEGV, current);
+		return epc;
+	}
+	if (cpu_has_mips16) {
+		union mips16e_instruction inst_mips16e;
+
+		inst_mips16e.full = inst;
+		if (inst_mips16e.ri.opcode == MIPS16e_jal_op)
+			epc += 4;
+		else
+			epc += 2;
+	} else if (mm_insn_16bit(inst))
+		epc += 2;
+	else
+		epc += 4;
+
+	return epc;
+}
+
+/* (microMIPS) Convert 16-bit register encoding to 32-bit register encoding. */
+static const unsigned int reg16to32map[8] = {16, 17, 2, 3, 4, 5, 6, 7};
+
+int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
+		       unsigned long *contpc)
+{
+	union mips_instruction insn = (union mips_instruction)dec_insn.insn;
+	int bc_false = 0;
+	unsigned int fcr31;
+	unsigned int bit;
+
+	if (!cpu_has_mmips)
+		return 0;
+
+	switch (insn.mm_i_format.opcode) {
+	case mm_pool32a_op:
+		if ((insn.mm_i_format.simmediate & MM_POOL32A_MINOR_MASK) ==
+		    mm_pool32axf_op) {
+			switch (insn.mm_i_format.simmediate >>
+				MM_POOL32A_MINOR_SHIFT) {
+			case mm_jalr_op:
+			case mm_jalrhb_op:
+			case mm_jalrs_op:
+			case mm_jalrshb_op:
+				if (insn.mm_i_format.rt != 0)	/* Not mm_jr */
+					regs->regs[insn.mm_i_format.rt] =
+						regs->cp0_epc +
+						dec_insn.pc_inc +
+						dec_insn.next_pc_inc;
+				*contpc = regs->regs[insn.mm_i_format.rs];
+				return 1;
+			}
+		}
+		break;
+	case mm_pool32i_op:
+		switch (insn.mm_i_format.rt) {
+		case mm_bltzals_op:
+		case mm_bltzal_op:
+			regs->regs[31] = regs->cp0_epc +
+				dec_insn.pc_inc +
+				dec_insn.next_pc_inc;
+			/* Fall through */
+		case mm_bltz_op:
+			if ((long)regs->regs[insn.mm_i_format.rs] < 0)
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					(insn.mm_i_format.simmediate << 1);
+			else
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					dec_insn.next_pc_inc;
+			return 1;
+		case mm_bgezals_op:
+		case mm_bgezal_op:
+			regs->regs[31] = regs->cp0_epc +
+					dec_insn.pc_inc +
+					dec_insn.next_pc_inc;
+			/* Fall through */
+		case mm_bgez_op:
+			if ((long)regs->regs[insn.mm_i_format.rs] >= 0)
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					(insn.mm_i_format.simmediate << 1);
+			else
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					dec_insn.next_pc_inc;
+			return 1;
+		case mm_blez_op:
+			if ((long)regs->regs[insn.mm_i_format.rs] <= 0)
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					(insn.mm_i_format.simmediate << 1);
+			else
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					dec_insn.next_pc_inc;
+			return 1;
+		case mm_bgtz_op:
+			if ((long)regs->regs[insn.mm_i_format.rs] <= 0)
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					(insn.mm_i_format.simmediate << 1);
+			else
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					dec_insn.next_pc_inc;
+			return 1;
+		case mm_bc2f_op:
+		case mm_bc1f_op:
+			bc_false = 1;
+			/* Fall through */
+		case mm_bc2t_op:
+		case mm_bc1t_op:
+			preempt_disable();
+			if (is_fpu_owner())
+			        fcr31 = read_32bit_cp1_register(CP1_STATUS);
+			else
+				fcr31 = current->thread.fpu.fcr31;
+			preempt_enable();
+
+			if (bc_false)
+				fcr31 = ~fcr31;
+
+			bit = (insn.mm_i_format.rs >> 2);
+			bit += (bit != 0);
+			bit += 23;
+			if (fcr31 & (1 << bit))
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc +
+					(insn.mm_i_format.simmediate << 1);
+			else
+				*contpc = regs->cp0_epc +
+					dec_insn.pc_inc + dec_insn.next_pc_inc;
+			return 1;
+		}
+		break;
+	case mm_pool16c_op:
+		switch (insn.mm_i_format.rt) {
+		case mm_jalr16_op:
+		case mm_jalrs16_op:
+			regs->regs[31] = regs->cp0_epc +
+				dec_insn.pc_inc + dec_insn.next_pc_inc;
+			/* Fall through */
+		case mm_jr16_op:
+			*contpc = regs->regs[insn.mm_i_format.rs];
+			return 1;
+		}
+		break;
+	case mm_beqz16_op:
+		if ((long)regs->regs[reg16to32map[insn.mm_b1_format.rs]] == 0)
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc +
+				(insn.mm_b1_format.simmediate << 1);
+		else
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc + dec_insn.next_pc_inc;
+		return 1;
+	case mm_bnez16_op:
+		if ((long)regs->regs[reg16to32map[insn.mm_b1_format.rs]] != 0)
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc +
+				(insn.mm_b1_format.simmediate << 1);
+		else
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc + dec_insn.next_pc_inc;
+		return 1;
+	case mm_b16_op:
+		*contpc = regs->cp0_epc + dec_insn.pc_inc +
+			 (insn.mm_b0_format.simmediate << 1);
+		return 1;
+	case mm_beq32_op:
+		if (regs->regs[insn.mm_i_format.rs] ==
+		    regs->regs[insn.mm_i_format.rt])
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc +
+				(insn.mm_i_format.simmediate << 1);
+		else
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc +
+				dec_insn.next_pc_inc;
+		return 1;
+	case mm_bne32_op:
+		if (regs->regs[insn.mm_i_format.rs] !=
+		    regs->regs[insn.mm_i_format.rt])
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc +
+				(insn.mm_i_format.simmediate << 1);
+		else
+			*contpc = regs->cp0_epc +
+				dec_insn.pc_inc + dec_insn.next_pc_inc;
+		return 1;
+	case mm_jalx32_op:
+		regs->regs[31] = regs->cp0_epc +
+			dec_insn.pc_inc + dec_insn.next_pc_inc;
+		*contpc = regs->cp0_epc + dec_insn.pc_inc;
+		*contpc >>= 28;
+		*contpc <<= 28;
+		*contpc |= (insn.j_format.target << 2);
+		return 1;
+	case mm_jals32_op:
+	case mm_jal32_op:
+		regs->regs[31] = regs->cp0_epc +
+			dec_insn.pc_inc + dec_insn.next_pc_inc;
+		/* Fall through */
+	case mm_j32_op:
+		*contpc = regs->cp0_epc + dec_insn.pc_inc;
+		*contpc >>= 27;
+		*contpc <<= 27;
+		*contpc |= (insn.j_format.target << 1);
+		set_isa16_mode(*contpc);
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * Compute return address and emulate branch in microMIPS mode after an
+ * exception only. It does not handle compact branches/jumps and cannot
+ * be used in interrupt context. (Compact branches/jumps do not cause
+ * exceptions.)
+ */
+int __microMIPS_compute_return_epc(struct pt_regs *regs)
+{
+	u16 __user *pc16;
+	u16 halfword;
+	unsigned int word;
+	unsigned long contpc;
+	struct mm_decoded_insn mminsn = { 0 };
+
+	mminsn.micro_mips_mode = 1;
+
+	/* This load never faults. */
+	pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc);
+	__get_user(halfword, pc16);
+	pc16++;
+	contpc = regs->cp0_epc + 2;
+	word = ((unsigned int)halfword << 16);
+	mminsn.pc_inc = 2;
+
+	if (!mm_insn_16bit(halfword)) {
+		__get_user(halfword, pc16);
+		pc16++;
+		contpc = regs->cp0_epc + 4;
+		mminsn.pc_inc = 4;
+		word |= halfword;
+	}
+	mminsn.insn = word;
+
+	if (get_user(halfword, pc16))
+		goto sigsegv;
+	mminsn.next_pc_inc = 2;
+	word = ((unsigned int)halfword << 16);
+
+	if (!mm_insn_16bit(halfword)) {
+		pc16++;
+		if (get_user(halfword, pc16))
+			goto sigsegv;
+		mminsn.next_pc_inc = 4;
+		word |= halfword;
+	}
+	mminsn.next_insn = word;
+
+	mm_isBranchInstr(regs, mminsn, &contpc);
+
+	regs->cp0_epc = contpc;
+
+	return 0;
+
+sigsegv:
+	force_sig(SIGSEGV, current);
+	return -EFAULT;
+}
+
+/*
+ * Compute return address and emulate branch in MIPS16e mode after an
+ * exception only. It does not handle compact branches/jumps and cannot
+ * be used in interrupt context. (Compact branches/jumps do not cause
+ * exceptions.)
+ */
+int __MIPS16e_compute_return_epc(struct pt_regs *regs)
+{
+	u16 __user *addr;
+	union mips16e_instruction inst;
+	u16 inst2;
+	u32 fullinst;
+	long epc;
+
+	epc = regs->cp0_epc;
+
+	/* Read the instruction. */
+	addr = (u16 __user *)msk_isa16_mode(epc);
+	if (__get_user(inst.full, addr)) {
+		force_sig(SIGSEGV, current);
+		return -EFAULT;
+	}
+
+	switch (inst.ri.opcode) {
+	case MIPS16e_extend_op:
+		regs->cp0_epc += 4;
+		return 0;
+
+		/*
+		 *  JAL and JALX in MIPS16e mode
+		 */
+	case MIPS16e_jal_op:
+		addr += 1;
+		if (__get_user(inst2, addr)) {
+			force_sig(SIGSEGV, current);
+			return -EFAULT;
+		}
+		fullinst = ((unsigned)inst.full << 16) | inst2;
+		regs->regs[31] = epc + 6;
+		epc += 4;
+		epc >>= 28;
+		epc <<= 28;
+		/*
+		 * JAL:5 X:1 TARGET[20-16]:5 TARGET[25:21]:5 TARGET[15:0]:16
+		 *
+		 * ......TARGET[15:0].................TARGET[20:16]...........
+		 * ......TARGET[25:21]
+		 */
+		epc |=
+		    ((fullinst & 0xffff) << 2) | ((fullinst & 0x3e00000) >> 3) |
+		    ((fullinst & 0x1f0000) << 7);
+		if (!inst.jal.x)
+			set_isa16_mode(epc);	/* Set ISA mode bit. */
+		regs->cp0_epc = epc;
+		return 0;
+
+		/*
+		 *  J(AL)R(C)
+		 */
+	case MIPS16e_rr_op:
+		if (inst.rr.func == MIPS16e_jr_func) {
+
+			if (inst.rr.ra)
+				regs->cp0_epc = regs->regs[31];
+			else
+				regs->cp0_epc =
+				    regs->regs[reg16to32[inst.rr.rx]];
+
+			if (inst.rr.l) {
+				if (inst.rr.nd)
+					regs->regs[31] = epc + 2;
+				else
+					regs->regs[31] = epc + 4;
+			}
+			return 0;
+		}
+		break;
+	}
+
+	/*
+	 * All other cases have no branch delay slot and are 16-bits.
+	 * Branches do not cause an exception.
+	 */
+	regs->cp0_epc += 2;
+
+	return 0;
+}
+
+/**
+ * __compute_return_epc_for_insn - Computes the return address and do emulate
+ *				    branch simulation, if required.
+ *
+ * @regs:	Pointer to pt_regs
+ * @insn:	branch instruction to decode
+ * @returns:	-EFAULT on error and forces SIGBUS, and on success
+ *		returns 0 or BRANCH_LIKELY_TAKEN as appropriate after
+ *		evaluating the branch.
+ *
+ * MIPS R6 Compact branches and forbidden slots:
+ *	Compact branches do not throw exceptions because they do
+ *	not have delay slots. The forbidden slot instruction ($PC+4)
+ *	is only executed if the branch was not taken. Otherwise the
+ *	forbidden slot is skipped entirely. This means that the
+ *	only possible reason to be here because of a MIPS R6 compact
+ *	branch instruction is that the forbidden slot has thrown one.
+ *	In that case the branch was not taken, so the EPC can be safely
+ *	set to EPC + 8.
+ */
+int __compute_return_epc_for_insn(struct pt_regs *regs,
+				   union mips_instruction insn)
+{
+	unsigned int bit, fcr31, dspcontrol, reg;
+	long epc = regs->cp0_epc;
+	int ret = 0;
+
+	switch (insn.i_format.opcode) {
+	/*
+	 * jr and jalr are in r_format format.
+	 */
+	case spec_op:
+		switch (insn.r_format.func) {
+		case jalr_op:
+			regs->regs[insn.r_format.rd] = epc + 8;
+			/* Fall through */
+		case jr_op:
+			if (NO_R6EMU && insn.r_format.func == jr_op)
+				goto sigill_r6;
+			regs->cp0_epc = regs->regs[insn.r_format.rs];
+			break;
+		}
+		break;
+
+	/*
+	 * This group contains:
+	 * bltz_op, bgez_op, bltzl_op, bgezl_op,
+	 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
+	 */
+	case bcond_op:
+		switch (insn.i_format.rt) {
+		case bltzl_op:
+			if (NO_R6EMU)
+				goto sigill_r6;
+		case bltz_op:
+			if ((long)regs->regs[insn.i_format.rs] < 0) {
+				epc = epc + 4 + (insn.i_format.simmediate << 2);
+				if (insn.i_format.rt == bltzl_op)
+					ret = BRANCH_LIKELY_TAKEN;
+			} else
+				epc += 8;
+			regs->cp0_epc = epc;
+			break;
+
+		case bgezl_op:
+			if (NO_R6EMU)
+				goto sigill_r6;
+		case bgez_op:
+			if ((long)regs->regs[insn.i_format.rs] >= 0) {
+				epc = epc + 4 + (insn.i_format.simmediate << 2);
+				if (insn.i_format.rt == bgezl_op)
+					ret = BRANCH_LIKELY_TAKEN;
+			} else
+				epc += 8;
+			regs->cp0_epc = epc;
+			break;
+
+		case bltzal_op:
+		case bltzall_op:
+			if (NO_R6EMU && (insn.i_format.rs ||
+			    insn.i_format.rt == bltzall_op)) {
+				ret = -SIGILL;
+				break;
+			}
+			regs->regs[31] = epc + 8;
+			/*
+			 * OK we are here either because we hit a NAL
+			 * instruction or because we are emulating an
+			 * old bltzal{,l} one. Lets figure out what the
+			 * case really is.
+			 */
+			if (!insn.i_format.rs) {
+				/*
+				 * NAL or BLTZAL with rs == 0
+				 * Doesn't matter if we are R6 or not. The
+				 * result is the same
+				 */
+				regs->cp0_epc += 4 +
+					(insn.i_format.simmediate << 2);
+				break;
+			}
+			/* Now do the real thing for non-R6 BLTZAL{,L} */
+			if ((long)regs->regs[insn.i_format.rs] < 0) {
+				epc = epc + 4 + (insn.i_format.simmediate << 2);
+				if (insn.i_format.rt == bltzall_op)
+					ret = BRANCH_LIKELY_TAKEN;
+			} else
+				epc += 8;
+			regs->cp0_epc = epc;
+			break;
+
+		case bgezal_op:
+		case bgezall_op:
+			if (NO_R6EMU && (insn.i_format.rs ||
+			    insn.i_format.rt == bgezall_op)) {
+				ret = -SIGILL;
+				break;
+			}
+			regs->regs[31] = epc + 8;
+			/*
+			 * OK we are here either because we hit a BAL
+			 * instruction or because we are emulating an
+			 * old bgezal{,l} one. Lets figure out what the
+			 * case really is.
+			 */
+			if (!insn.i_format.rs) {
+				/*
+				 * BAL or BGEZAL with rs == 0
+				 * Doesn't matter if we are R6 or not. The
+				 * result is the same
+				 */
+				regs->cp0_epc += 4 +
+					(insn.i_format.simmediate << 2);
+				break;
+			}
+			/* Now do the real thing for non-R6 BGEZAL{,L} */
+			if ((long)regs->regs[insn.i_format.rs] >= 0) {
+				epc = epc + 4 + (insn.i_format.simmediate << 2);
+				if (insn.i_format.rt == bgezall_op)
+					ret = BRANCH_LIKELY_TAKEN;
+			} else
+				epc += 8;
+			regs->cp0_epc = epc;
+			break;
+
+		case bposge32_op:
+			if (!cpu_has_dsp)
+				goto sigill_dsp;
+
+			dspcontrol = rddsp(0x01);
+
+			if (dspcontrol >= 32) {
+				epc = epc + 4 + (insn.i_format.simmediate << 2);
+			} else
+				epc += 8;
+			regs->cp0_epc = epc;
+			break;
+		}
+		break;
+
+	/*
+	 * These are unconditional and in j_format.
+	 */
+	case jal_op:
+		regs->regs[31] = regs->cp0_epc + 8;
+	case j_op:
+		epc += 4;
+		epc >>= 28;
+		epc <<= 28;
+		epc |= (insn.j_format.target << 2);
+		regs->cp0_epc = epc;
+		if (insn.i_format.opcode == jalx_op)
+			set_isa16_mode(regs->cp0_epc);
+		break;
+
+	/*
+	 * These are conditional and in i_format.
+	 */
+	case beql_op:
+		if (NO_R6EMU)
+			goto sigill_r6;
+	case beq_op:
+		if (regs->regs[insn.i_format.rs] ==
+		    regs->regs[insn.i_format.rt]) {
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+			if (insn.i_format.opcode == beql_op)
+				ret = BRANCH_LIKELY_TAKEN;
+		} else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+
+	case bnel_op:
+		if (NO_R6EMU)
+			goto sigill_r6;
+	case bne_op:
+		if (regs->regs[insn.i_format.rs] !=
+		    regs->regs[insn.i_format.rt]) {
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+			if (insn.i_format.opcode == bnel_op)
+				ret = BRANCH_LIKELY_TAKEN;
+		} else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+
+	case blezl_op: /* not really i_format */
+		if (NO_R6EMU)
+			goto sigill_r6;
+	case blez_op:
+		/*
+		 * Compact branches for R6 for the
+		 * blez and blezl opcodes.
+		 * BLEZ  | rs = 0 | rt != 0  == BLEZALC
+		 * BLEZ  | rs = rt != 0      == BGEZALC
+		 * BLEZ  | rs != 0 | rt != 0 == BGEUC
+		 * BLEZL | rs = 0 | rt != 0  == BLEZC
+		 * BLEZL | rs = rt != 0      == BGEZC
+		 * BLEZL | rs != 0 | rt != 0 == BGEC
+		 *
+		 * For real BLEZ{,L}, rt is always 0.
+		 */
+
+		if (cpu_has_mips_r6 && insn.i_format.rt) {
+			if ((insn.i_format.opcode == blez_op) &&
+			    ((!insn.i_format.rs && insn.i_format.rt) ||
+			     (insn.i_format.rs == insn.i_format.rt)))
+				regs->regs[31] = epc + 4;
+			regs->cp0_epc += 8;
+			break;
+		}
+		/* rt field assumed to be zero */
+		if ((long)regs->regs[insn.i_format.rs] <= 0) {
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+			if (insn.i_format.opcode == blezl_op)
+				ret = BRANCH_LIKELY_TAKEN;
+		} else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+
+	case bgtzl_op:
+		if (NO_R6EMU)
+			goto sigill_r6;
+	case bgtz_op:
+		/*
+		 * Compact branches for R6 for the
+		 * bgtz and bgtzl opcodes.
+		 * BGTZ  | rs = 0 | rt != 0  == BGTZALC
+		 * BGTZ  | rs = rt != 0      == BLTZALC
+		 * BGTZ  | rs != 0 | rt != 0 == BLTUC
+		 * BGTZL | rs = 0 | rt != 0  == BGTZC
+		 * BGTZL | rs = rt != 0      == BLTZC
+		 * BGTZL | rs != 0 | rt != 0 == BLTC
+		 *
+		 * *ZALC varint for BGTZ &&& rt != 0
+		 * For real GTZ{,L}, rt is always 0.
+		 */
+		if (cpu_has_mips_r6 && insn.i_format.rt) {
+			if ((insn.i_format.opcode == blez_op) &&
+			    ((!insn.i_format.rs && insn.i_format.rt) ||
+			    (insn.i_format.rs == insn.i_format.rt)))
+				regs->regs[31] = epc + 4;
+			regs->cp0_epc += 8;
+			break;
+		}
+
+		/* rt field assumed to be zero */
+		if ((long)regs->regs[insn.i_format.rs] > 0) {
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+			if (insn.i_format.opcode == bgtzl_op)
+				ret = BRANCH_LIKELY_TAKEN;
+		} else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+
+	/*
+	 * And now the FPA/cp1 branch instructions.
+	 */
+	case cop1_op:
+		if (cpu_has_mips_r6 &&
+		    ((insn.i_format.rs == bc1eqz_op) ||
+		     (insn.i_format.rs == bc1nez_op))) {
+			if (!used_math()) { /* First time FPU user */
+				ret = init_fpu();
+				if (ret && NO_R6EMU) {
+					ret = -ret;
+					break;
+				}
+				ret = 0;
+				set_used_math();
+			}
+			lose_fpu(1);    /* Save FPU state for the emulator. */
+			reg = insn.i_format.rt;
+			bit = 0;
+			switch (insn.i_format.rs) {
+			case bc1eqz_op:
+				/* Test bit 0 */
+				if (get_fpr32(&current->thread.fpu.fpr[reg], 0)
+				    & 0x1)
+					bit = 1;
+				break;
+			case bc1nez_op:
+				/* Test bit 0 */
+				if (!(get_fpr32(&current->thread.fpu.fpr[reg], 0)
+				      & 0x1))
+					bit = 1;
+				break;
+			}
+			own_fpu(1);
+			if (bit)
+				epc = epc + 4 +
+					(insn.i_format.simmediate << 2);
+			else
+				epc += 8;
+			regs->cp0_epc = epc;
+
+			break;
+		} else {
+
+			preempt_disable();
+			if (is_fpu_owner())
+			        fcr31 = read_32bit_cp1_register(CP1_STATUS);
+			else
+				fcr31 = current->thread.fpu.fcr31;
+			preempt_enable();
+
+			bit = (insn.i_format.rt >> 2);
+			bit += (bit != 0);
+			bit += 23;
+			switch (insn.i_format.rt & 3) {
+			case 0: /* bc1f */
+			case 2: /* bc1fl */
+				if (~fcr31 & (1 << bit)) {
+					epc = epc + 4 +
+						(insn.i_format.simmediate << 2);
+					if (insn.i_format.rt == 2)
+						ret = BRANCH_LIKELY_TAKEN;
+				} else
+					epc += 8;
+				regs->cp0_epc = epc;
+				break;
+
+			case 1: /* bc1t */
+			case 3: /* bc1tl */
+				if (fcr31 & (1 << bit)) {
+					epc = epc + 4 +
+						(insn.i_format.simmediate << 2);
+					if (insn.i_format.rt == 3)
+						ret = BRANCH_LIKELY_TAKEN;
+				} else
+					epc += 8;
+				regs->cp0_epc = epc;
+				break;
+			}
+			break;
+		}
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	case lwc2_op: /* This is bbit0 on Octeon */
+		if ((regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt))
+		     == 0)
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+		else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+	case ldc2_op: /* This is bbit032 on Octeon */
+		if ((regs->regs[insn.i_format.rs] &
+		    (1ull<<(insn.i_format.rt+32))) == 0)
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+		else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+	case swc2_op: /* This is bbit1 on Octeon */
+		if (regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt))
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+		else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+	case sdc2_op: /* This is bbit132 on Octeon */
+		if (regs->regs[insn.i_format.rs] &
+		    (1ull<<(insn.i_format.rt+32)))
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+		else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+#else
+	case bc6_op:
+		/* Only valid for MIPS R6 */
+		if (!cpu_has_mips_r6) {
+			ret = -SIGILL;
+			break;
+		}
+		regs->cp0_epc += 8;
+		break;
+	case balc6_op:
+		if (!cpu_has_mips_r6) {
+			ret = -SIGILL;
+			break;
+		}
+		/* Compact branch: BALC */
+		regs->regs[31] = epc + 4;
+		epc += 4 + (insn.i_format.simmediate << 2);
+		regs->cp0_epc = epc;
+		break;
+	case beqzcjic_op:
+		if (!cpu_has_mips_r6) {
+			ret = -SIGILL;
+			break;
+		}
+		/* Compact branch: BEQZC || JIC */
+		regs->cp0_epc += 8;
+		break;
+	case bnezcjialc_op:
+		if (!cpu_has_mips_r6) {
+			ret = -SIGILL;
+			break;
+		}
+		/* Compact branch: BNEZC || JIALC */
+		if (insn.i_format.rs)
+			regs->regs[31] = epc + 4;
+		regs->cp0_epc += 8;
+		break;
+#endif
+	case cbcond0_op:
+	case cbcond1_op:
+		/* Only valid for MIPS R6 */
+		if (!cpu_has_mips_r6) {
+			ret = -SIGILL;
+			break;
+		}
+		/*
+		 * Compact branches:
+		 * bovc, beqc, beqzalc, bnvc, bnec, bnezlac
+		 */
+		if (insn.i_format.rt && !insn.i_format.rs)
+			regs->regs[31] = epc + 4;
+		regs->cp0_epc += 8;
+		break;
+	}
+
+	return ret;
+
+sigill_dsp:
+	printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm);
+	force_sig(SIGBUS, current);
+	return -EFAULT;
+sigill_r6:
+	pr_info("%s: R2 branch but r2-to-r6 emulator is not preset - sending SIGILL.\n",
+		current->comm);
+	force_sig(SIGILL, current);
+	return -EFAULT;
+}
+EXPORT_SYMBOL_GPL(__compute_return_epc_for_insn);
+
+int __compute_return_epc(struct pt_regs *regs)
+{
+	unsigned int __user *addr;
+	long epc;
+	union mips_instruction insn;
+
+	epc = regs->cp0_epc;
+	if (epc & 3)
+		goto unaligned;
+
+	/*
+	 * Read the instruction
+	 */
+	addr = (unsigned int __user *) epc;
+	if (__get_user(insn.word, addr)) {
+		force_sig(SIGSEGV, current);
+		return -EFAULT;
+	}
+
+	return __compute_return_epc_for_insn(regs, insn);
+
+unaligned:
+	printk("%s: unaligned epc - sending SIGBUS.\n", current->comm);
+	force_sig(SIGBUS, current);
+	return -EFAULT;
+}
diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c
new file mode 100644
index 000000000..797645718
--- /dev/null
+++ b/arch/mips/kernel/cevt-bcm1480.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/smp.h>
+#include <linux/irq.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+#define IMR_IP2_VAL	K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL	K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL	K_BCM1480_INT_MAP_I2
+
+/*
+ * The general purpose timer ticks at 1MHz independent if
+ * the rest of the system
+ */
+static void sibyte_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *evt)
+{
+	unsigned int cpu = smp_processor_id();
+	void __iomem *cfg, *init;
+
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		__raw_writeq(0, cfg);
+		__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
+		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+			     cfg);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Stop the timer until we actually program a shot */
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		__raw_writeq(0, cfg);
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
+	case CLOCK_EVT_MODE_RESUME:
+		;
+	}
+}
+
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+	unsigned int cpu = smp_processor_id();
+	void __iomem *cfg, *init;
+
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+	__raw_writeq(0, cfg);
+	__raw_writeq(delta - 1, init);
+	__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
+
+	return 0;
+}
+
+static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
+{
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd = dev_id;
+	void __iomem *cfg;
+	unsigned long tmode;
+
+	if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
+		tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
+	else
+		tmode = 0;
+
+	/* ACK interrupt */
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	____raw_writeq(tmode, cfg);
+
+	cd->event_handler(cd);
+
+	return IRQ_HANDLED;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
+static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
+static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
+
+void sb1480_clockevent_init(void)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
+	struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
+	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+	unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+
+	BUG_ON(cpu > 3);	/* Only have 4 general purpose timers */
+
+	sprintf(name, "bcm1480-counter-%d", cpu);
+	cd->name		= name;
+	cd->features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT;
+	clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
+	cd->max_delta_ns	= clockevent_delta2ns(0x7fffff, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(2, cd);
+	cd->rating		= 200;
+	cd->irq			= irq;
+	cd->cpumask		= cpumask_of(cpu);
+	cd->set_next_event	= sibyte_next_event;
+	cd->set_mode		= sibyte_set_mode;
+	clockevents_register_device(cd);
+
+	bcm1480_mask_irq(cpu, irq);
+
+	/*
+	 * Map the timer interrupt to IP[4] of this cpu
+	 */
+	__raw_writeq(IMR_IP4_VAL,
+		     IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+			R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
+
+	bcm1480_unmask_irq(cpu, irq);
+
+	action->handler = sibyte_counter_handler;
+	action->flags	= IRQF_PERCPU | IRQF_TIMER;
+	action->name	= name;
+	action->dev_id	= cd;
+
+	irq_set_affinity(irq, cpumask_of(cpu));
+	setup_irq(irq, action);
+}
diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c
new file mode 100644
index 000000000..ff1f01b72
--- /dev/null
+++ b/arch/mips/kernel/cevt-ds1287.c
@@ -0,0 +1,130 @@
+/*
+ *  DS1287 clockevent driver
+ *
+ *  Copyright (C) 2008	Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/clockchips.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/irq.h>
+
+#include <asm/time.h>
+
+int ds1287_timer_state(void)
+{
+	return (CMOS_READ(RTC_REG_C) & RTC_PF) != 0;
+}
+
+int ds1287_set_base_clock(unsigned int hz)
+{
+	u8 rate;
+
+	switch (hz) {
+	case 128:
+		rate = 0x9;
+		break;
+	case 256:
+		rate = 0x8;
+		break;
+	case 1024:
+		rate = 0x6;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	CMOS_WRITE(RTC_REF_CLCK_32KHZ | rate, RTC_REG_A);
+
+	return 0;
+}
+
+static int ds1287_set_next_event(unsigned long delta,
+				 struct clock_event_device *evt)
+{
+	return -EINVAL;
+}
+
+static void ds1287_set_mode(enum clock_event_mode mode,
+			    struct clock_event_device *evt)
+{
+	u8 val;
+
+	spin_lock(&rtc_lock);
+
+	val = CMOS_READ(RTC_REG_B);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		val |= RTC_PIE;
+		break;
+	default:
+		val &= ~RTC_PIE;
+		break;
+	}
+
+	CMOS_WRITE(val, RTC_REG_B);
+
+	spin_unlock(&rtc_lock);
+}
+
+static void ds1287_event_handler(struct clock_event_device *dev)
+{
+}
+
+static struct clock_event_device ds1287_clockevent = {
+	.name		= "ds1287",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.set_next_event = ds1287_set_next_event,
+	.set_mode	= ds1287_set_mode,
+	.event_handler	= ds1287_event_handler,
+};
+
+static irqreturn_t ds1287_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *cd = &ds1287_clockevent;
+
+	/* Ack the RTC interrupt. */
+	CMOS_READ(RTC_REG_C);
+
+	cd->event_handler(cd);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction ds1287_irqaction = {
+	.handler	= ds1287_interrupt,
+	.flags		= IRQF_PERCPU | IRQF_TIMER,
+	.name		= "ds1287",
+};
+
+int __init ds1287_clockevent_init(int irq)
+{
+	struct clock_event_device *cd;
+
+	cd = &ds1287_clockevent;
+	cd->rating = 100;
+	cd->irq = irq;
+	clockevent_set_clock(cd, 32768);
+	cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
+	cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
+	cd->cpumask = cpumask_of(0);
+
+	clockevents_register_device(&ds1287_clockevent);
+
+	return setup_irq(irq, &ds1287_irqaction);
+}
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
new file mode 100644
index 000000000..f06946075
--- /dev/null
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -0,0 +1,141 @@
+/*
+ *  GT641xx clockevent routines.
+ *
+ *  Copyright (C) 2007	Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/clockchips.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+
+#include <asm/gt64120.h>
+#include <asm/time.h>
+
+static DEFINE_RAW_SPINLOCK(gt641xx_timer_lock);
+static unsigned int gt641xx_base_clock;
+
+void gt641xx_set_base_clock(unsigned int clock)
+{
+	gt641xx_base_clock = clock;
+}
+
+int gt641xx_timer0_state(void)
+{
+	if (GT_READ(GT_TC0_OFS))
+		return 0;
+
+	GT_WRITE(GT_TC0_OFS, gt641xx_base_clock / HZ);
+	GT_WRITE(GT_TC_CONTROL_OFS, GT_TC_CONTROL_ENTC0_MSK);
+
+	return 1;
+}
+
+static int gt641xx_timer0_set_next_event(unsigned long delta,
+					 struct clock_event_device *evt)
+{
+	u32 ctrl;
+
+	raw_spin_lock(&gt641xx_timer_lock);
+
+	ctrl = GT_READ(GT_TC_CONTROL_OFS);
+	ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK);
+	ctrl |= GT_TC_CONTROL_ENTC0_MSK;
+
+	GT_WRITE(GT_TC0_OFS, delta);
+	GT_WRITE(GT_TC_CONTROL_OFS, ctrl);
+
+	raw_spin_unlock(&gt641xx_timer_lock);
+
+	return 0;
+}
+
+static void gt641xx_timer0_set_mode(enum clock_event_mode mode,
+				    struct clock_event_device *evt)
+{
+	u32 ctrl;
+
+	raw_spin_lock(&gt641xx_timer_lock);
+
+	ctrl = GT_READ(GT_TC_CONTROL_OFS);
+	ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		ctrl |= GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK;
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		ctrl |= GT_TC_CONTROL_ENTC0_MSK;
+		break;
+	default:
+		break;
+	}
+
+	GT_WRITE(GT_TC_CONTROL_OFS, ctrl);
+
+	raw_spin_unlock(&gt641xx_timer_lock);
+}
+
+static void gt641xx_timer0_event_handler(struct clock_event_device *dev)
+{
+}
+
+static struct clock_event_device gt641xx_timer0_clockevent = {
+	.name		= "gt641xx-timer0",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.irq		= GT641XX_TIMER0_IRQ,
+	.set_next_event = gt641xx_timer0_set_next_event,
+	.set_mode	= gt641xx_timer0_set_mode,
+	.event_handler	= gt641xx_timer0_event_handler,
+};
+
+static irqreturn_t gt641xx_timer0_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *cd = &gt641xx_timer0_clockevent;
+
+	cd->event_handler(cd);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction gt641xx_timer0_irqaction = {
+	.handler	= gt641xx_timer0_interrupt,
+	.flags		= IRQF_PERCPU | IRQF_TIMER,
+	.name		= "gt641xx_timer0",
+};
+
+static int __init gt641xx_timer0_clockevent_init(void)
+{
+	struct clock_event_device *cd;
+
+	if (!gt641xx_base_clock)
+		return 0;
+
+	GT_WRITE(GT_TC0_OFS, gt641xx_base_clock / HZ);
+
+	cd = &gt641xx_timer0_clockevent;
+	cd->rating = 200 + gt641xx_base_clock / 10000000;
+	clockevent_set_clock(cd, gt641xx_base_clock);
+	cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
+	cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
+	cd->cpumask = cpumask_of(0);
+
+	clockevents_register_device(&gt641xx_timer0_clockevent);
+
+	return setup_irq(GT641XX_TIMER0_IRQ, &gt641xx_timer0_irqaction);
+}
+arch_initcall(gt641xx_timer0_clockevent_init);
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
new file mode 100644
index 000000000..d70c4d893
--- /dev/null
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -0,0 +1,229 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/smp.h>
+#include <linux/irq.h>
+
+#include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+static int mips_next_event(unsigned long delta,
+			   struct clock_event_device *evt)
+{
+	unsigned int cnt;
+	int res;
+
+	cnt = read_c0_count();
+	cnt += delta;
+	write_c0_compare(cnt);
+	res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
+	return res;
+}
+
+void mips_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	/* Nothing to do ...  */
+}
+
+DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+int cp0_timer_irq_installed;
+
+/*
+ * Possibly handle a performance counter interrupt.
+ * Return true if the timer interrupt should not be checked
+ */
+static inline int handle_perf_irq(int r2)
+{
+	/*
+	 * The performance counter overflow interrupt may be shared with the
+	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
+	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
+	 * and we can't reliably determine if a counter interrupt has also
+	 * happened (!r2) then don't check for a timer interrupt.
+	 */
+	return (cp0_perfcount_irq < 0) &&
+		perf_irq() == IRQ_HANDLED &&
+		!r2;
+}
+
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+{
+	const int r2 = cpu_has_mips_r2_r6;
+	struct clock_event_device *cd;
+	int cpu = smp_processor_id();
+
+	/*
+	 * Suckage alert:
+	 * Before R2 of the architecture there was no way to see if a
+	 * performance counter interrupt was pending, so we have to run
+	 * the performance counter interrupt handler anyway.
+	 */
+	if (handle_perf_irq(r2))
+		return IRQ_HANDLED;
+
+	/*
+	 * The same applies to performance counter interrupts.	But with the
+	 * above we now know that the reason we got here must be a timer
+	 * interrupt.  Being the paranoiacs we are we check anyway.
+	 */
+	if (!r2 || (read_c0_cause() & CAUSEF_TI)) {
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
+		cd = &per_cpu(mips_clockevent_device, cpu);
+		cd->event_handler(cd);
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+struct irqaction c0_compare_irqaction = {
+	.handler = c0_compare_interrupt,
+	/*
+	 * IRQF_SHARED: The timer interrupt may be shared with other interrupts
+	 * such as perf counter and FDC interrupts.
+	 */
+	.flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED,
+	.name = "timer",
+};
+
+
+void mips_event_handler(struct clock_event_device *dev)
+{
+}
+
+/*
+ * FIXME: This doesn't hold for the relocated E9000 compare interrupt.
+ */
+static int c0_compare_int_pending(void)
+{
+	/* When cpu_has_mips_r2, this checks Cause.TI instead of Cause.IP7 */
+	return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP);
+}
+
+/*
+ * Compare interrupt can be routed and latched outside the core,
+ * so wait up to worst case number of cycle counter ticks for timer interrupt
+ * changes to propagate to the cause register.
+ */
+#define COMPARE_INT_SEEN_TICKS 50
+
+int c0_compare_int_usable(void)
+{
+	unsigned int delta;
+	unsigned int cnt;
+
+#ifdef CONFIG_KVM_GUEST
+    return 1;
+#endif
+
+	/*
+	 * IP7 already pending?	 Try to clear it by acking the timer.
+	 */
+	if (c0_compare_int_pending()) {
+		cnt = read_c0_count();
+		write_c0_compare(cnt);
+		back_to_back_c0_hazard();
+		while (read_c0_count() < (cnt  + COMPARE_INT_SEEN_TICKS))
+			if (!c0_compare_int_pending())
+				break;
+		if (c0_compare_int_pending())
+			return 0;
+	}
+
+	for (delta = 0x10; delta <= 0x400000; delta <<= 1) {
+		cnt = read_c0_count();
+		cnt += delta;
+		write_c0_compare(cnt);
+		back_to_back_c0_hazard();
+		if ((int)(read_c0_count() - cnt) < 0)
+		    break;
+		/* increase delta if the timer was already expired */
+	}
+
+	while ((int)(read_c0_count() - cnt) <= 0)
+		;	/* Wait for expiry  */
+
+	while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+		if (c0_compare_int_pending())
+			break;
+	if (!c0_compare_int_pending())
+		return 0;
+	cnt = read_c0_count();
+	write_c0_compare(cnt);
+	back_to_back_c0_hazard();
+	while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+		if (!c0_compare_int_pending())
+			break;
+	if (c0_compare_int_pending())
+		return 0;
+
+	/*
+	 * Feels like a real count / compare timer.
+	 */
+	return 1;
+}
+
+int r4k_clockevent_init(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd;
+	unsigned int irq;
+
+	if (!cpu_has_counter || !mips_hpt_frequency)
+		return -ENXIO;
+
+	if (!c0_compare_int_usable())
+		return -ENXIO;
+
+	/*
+	 * With vectored interrupts things are getting platform specific.
+	 * get_c0_compare_int is a hook to allow a platform to return the
+	 * interrupt number of it's liking.
+	 */
+	irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+	if (get_c0_compare_int)
+		irq = get_c0_compare_int();
+
+	cd = &per_cpu(mips_clockevent_device, cpu);
+
+	cd->name		= "MIPS";
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_C3STOP |
+				  CLOCK_EVT_FEAT_PERCPU;
+
+	clockevent_set_clock(cd, mips_hpt_frequency);
+
+	/* Calculate the min / max delta */
+	cd->max_delta_ns	= clockevent_delta2ns(0x7fffffff, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(0x300, cd);
+
+	cd->rating		= 300;
+	cd->irq			= irq;
+	cd->cpumask		= cpumask_of(cpu);
+	cd->set_next_event	= mips_next_event;
+	cd->set_mode		= mips_set_clock_mode;
+	cd->event_handler	= mips_event_handler;
+
+	clockevents_register_device(cd);
+
+	if (cp0_timer_irq_installed)
+		return 0;
+
+	cp0_timer_irq_installed = 1;
+
+	setup_irq(irq, &c0_compare_irqaction);
+
+	return 0;
+}
+
diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c
new file mode 100644
index 000000000..5ea6d6b1d
--- /dev/null
+++ b/arch/mips/kernel/cevt-sb1250.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/smp.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+#define IMR_IP2_VAL	K_INT_MAP_I0
+#define IMR_IP3_VAL	K_INT_MAP_I1
+#define IMR_IP4_VAL	K_INT_MAP_I2
+
+/*
+ * The general purpose timer ticks at 1MHz independent if
+ * the rest of the system
+ */
+static void sibyte_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *evt)
+{
+	unsigned int cpu = smp_processor_id();
+	void __iomem *cfg, *init;
+
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		__raw_writeq(0, cfg);
+		__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
+		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+			     cfg);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Stop the timer until we actually program a shot */
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		__raw_writeq(0, cfg);
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
+	case CLOCK_EVT_MODE_RESUME:
+		;
+	}
+}
+
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+	unsigned int cpu = smp_processor_id();
+	void __iomem *cfg, *init;
+
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+	__raw_writeq(0, cfg);
+	__raw_writeq(delta - 1, init);
+	__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
+
+	return 0;
+}
+
+static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
+{
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd = dev_id;
+	void __iomem *cfg;
+	unsigned long tmode;
+
+	if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
+		tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
+	else
+		tmode = 0;
+
+	/* ACK interrupt */
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	____raw_writeq(tmode, cfg);
+
+	cd->event_handler(cd);
+
+	return IRQ_HANDLED;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
+static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
+static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
+
+void sb1250_clockevent_init(void)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned int irq = K_INT_TIMER_0 + cpu;
+	struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
+	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+	unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+
+	/* Only have 4 general purpose timers, and we use last one as hpt */
+	BUG_ON(cpu > 2);
+
+	sprintf(name, "sb1250-counter-%d", cpu);
+	cd->name		= name;
+	cd->features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT;
+	clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
+	cd->max_delta_ns	= clockevent_delta2ns(0x7fffff, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(2, cd);
+	cd->rating		= 200;
+	cd->irq			= irq;
+	cd->cpumask		= cpumask_of(cpu);
+	cd->set_next_event	= sibyte_next_event;
+	cd->set_mode		= sibyte_set_mode;
+	clockevents_register_device(cd);
+
+	sb1250_mask_irq(cpu, irq);
+
+	/*
+	 * Map the timer interrupt to IP[4] of this cpu
+	 */
+	__raw_writeq(IMR_IP4_VAL,
+		     IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
+			    (irq << 3)));
+
+	sb1250_unmask_irq(cpu, irq);
+
+	action->handler = sibyte_counter_handler;
+	action->flags	= IRQF_PERCPU | IRQF_TIMER;
+	action->name	= name;
+	action->dev_id	= cd;
+
+	irq_set_affinity(irq, cpumask_of(cpu));
+	setup_irq(irq, action);
+}
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
new file mode 100644
index 000000000..723932441
--- /dev/null
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -0,0 +1,202 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Based on linux/arch/mips/kernel/cevt-r4k.c,
+ *	    linux/arch/mips/jmr3927/rbhma3100/setup.c
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/sched_clock.h>
+#include <asm/time.h>
+#include <asm/txx9tmr.h>
+
+#define TCR_BASE (TXx9_TMTCR_CCDE | TXx9_TMTCR_CRE | TXx9_TMTCR_TMODE_ITVL)
+#define TIMER_CCD	0	/* 1/2 */
+#define TIMER_CLK(imclk)	((imclk) / (2 << TIMER_CCD))
+
+struct txx9_clocksource {
+	struct clocksource cs;
+	struct txx9_tmr_reg __iomem *tmrptr;
+};
+
+static cycle_t txx9_cs_read(struct clocksource *cs)
+{
+	struct txx9_clocksource *txx9_cs =
+		container_of(cs, struct txx9_clocksource, cs);
+	return __raw_readl(&txx9_cs->tmrptr->trr);
+}
+
+/* Use 1 bit smaller width to use full bits in that width */
+#define TXX9_CLOCKSOURCE_BITS (TXX9_TIMER_BITS - 1)
+
+static struct txx9_clocksource txx9_clocksource = {
+	.cs = {
+		.name		= "TXx9",
+		.rating		= 200,
+		.read		= txx9_cs_read,
+		.mask		= CLOCKSOURCE_MASK(TXX9_CLOCKSOURCE_BITS),
+		.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
+static u64 notrace txx9_read_sched_clock(void)
+{
+	return __raw_readl(&txx9_clocksource.tmrptr->trr);
+}
+
+void __init txx9_clocksource_init(unsigned long baseaddr,
+				  unsigned int imbusclk)
+{
+	struct txx9_tmr_reg __iomem *tmrptr;
+
+	clocksource_register_hz(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
+
+	tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
+	__raw_writel(TCR_BASE, &tmrptr->tcr);
+	__raw_writel(0, &tmrptr->tisr);
+	__raw_writel(TIMER_CCD, &tmrptr->ccdr);
+	__raw_writel(TXx9_TMITMR_TZCE, &tmrptr->itmr);
+	__raw_writel(1 << TXX9_CLOCKSOURCE_BITS, &tmrptr->cpra);
+	__raw_writel(TCR_BASE | TXx9_TMTCR_TCE, &tmrptr->tcr);
+	txx9_clocksource.tmrptr = tmrptr;
+
+	sched_clock_register(txx9_read_sched_clock, TXX9_CLOCKSOURCE_BITS,
+			     TIMER_CLK(imbusclk));
+}
+
+struct txx9_clock_event_device {
+	struct clock_event_device cd;
+	struct txx9_tmr_reg __iomem *tmrptr;
+};
+
+static void txx9tmr_stop_and_clear(struct txx9_tmr_reg __iomem *tmrptr)
+{
+	/* stop and reset counter */
+	__raw_writel(TCR_BASE, &tmrptr->tcr);
+	/* clear pending interrupt */
+	__raw_writel(0, &tmrptr->tisr);
+}
+
+static void txx9tmr_set_mode(enum clock_event_mode mode,
+			     struct clock_event_device *evt)
+{
+	struct txx9_clock_event_device *txx9_cd =
+		container_of(evt, struct txx9_clock_event_device, cd);
+	struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr;
+
+	txx9tmr_stop_and_clear(tmrptr);
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		__raw_writel(TXx9_TMITMR_TIIE | TXx9_TMITMR_TZCE,
+			     &tmrptr->itmr);
+		/* start timer */
+		__raw_writel(((u64)(NSEC_PER_SEC / HZ) * evt->mult) >>
+			     evt->shift,
+			     &tmrptr->cpra);
+		__raw_writel(TCR_BASE | TXx9_TMTCR_TCE, &tmrptr->tcr);
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		__raw_writel(0, &tmrptr->itmr);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		__raw_writel(TXx9_TMITMR_TIIE, &tmrptr->itmr);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		__raw_writel(TIMER_CCD, &tmrptr->ccdr);
+		__raw_writel(0, &tmrptr->itmr);
+		break;
+	}
+}
+
+static int txx9tmr_set_next_event(unsigned long delta,
+				  struct clock_event_device *evt)
+{
+	struct txx9_clock_event_device *txx9_cd =
+		container_of(evt, struct txx9_clock_event_device, cd);
+	struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr;
+
+	txx9tmr_stop_and_clear(tmrptr);
+	/* start timer */
+	__raw_writel(delta, &tmrptr->cpra);
+	__raw_writel(TCR_BASE | TXx9_TMTCR_TCE, &tmrptr->tcr);
+	return 0;
+}
+
+static struct txx9_clock_event_device txx9_clock_event_device = {
+	.cd = {
+		.name		= "TXx9",
+		.features	= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+		.rating		= 200,
+		.set_mode	= txx9tmr_set_mode,
+		.set_next_event = txx9tmr_set_next_event,
+	},
+};
+
+static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id)
+{
+	struct txx9_clock_event_device *txx9_cd = dev_id;
+	struct clock_event_device *cd = &txx9_cd->cd;
+	struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr;
+
+	__raw_writel(0, &tmrptr->tisr); /* ack interrupt */
+	cd->event_handler(cd);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction txx9tmr_irq = {
+	.handler	= txx9tmr_interrupt,
+	.flags		= IRQF_PERCPU | IRQF_TIMER,
+	.name		= "txx9tmr",
+	.dev_id		= &txx9_clock_event_device,
+};
+
+void __init txx9_clockevent_init(unsigned long baseaddr, int irq,
+				 unsigned int imbusclk)
+{
+	struct clock_event_device *cd = &txx9_clock_event_device.cd;
+	struct txx9_tmr_reg __iomem *tmrptr;
+
+	tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
+	txx9tmr_stop_and_clear(tmrptr);
+	__raw_writel(TIMER_CCD, &tmrptr->ccdr);
+	__raw_writel(0, &tmrptr->itmr);
+	txx9_clock_event_device.tmrptr = tmrptr;
+
+	clockevent_set_clock(cd, TIMER_CLK(imbusclk));
+	cd->max_delta_ns =
+		clockevent_delta2ns(0xffffffff >> (32 - TXX9_TIMER_BITS), cd);
+	cd->min_delta_ns = clockevent_delta2ns(0xf, cd);
+	cd->irq = irq;
+	cd->cpumask = cpumask_of(0),
+	clockevents_register_device(cd);
+	setup_irq(irq, &txx9tmr_irq);
+	printk(KERN_INFO "TXx9: clockevent device at 0x%lx, irq %d\n",
+	       baseaddr, irq);
+}
+
+void __init txx9_tmr_init(unsigned long baseaddr)
+{
+	struct txx9_tmr_reg __iomem *tmrptr;
+
+	tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
+	/* Start once to make CounterResetEnable effective */
+	__raw_writel(TXx9_TMTCR_CRE | TXx9_TMTCR_TCE, &tmrptr->tcr);
+	/* Stop and reset the counter */
+	__raw_writel(TXx9_TMTCR_CRE, &tmrptr->tcr);
+	__raw_writel(0, &tmrptr->tisr);
+	__raw_writel(0xffffffff, &tmrptr->cpra);
+	__raw_writel(0, &tmrptr->itmr);
+	__raw_writel(0, &tmrptr->ccdr);
+	__raw_writel(0, &tmrptr->pgmr);
+	iounmap(tmrptr);
+}
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
new file mode 100644
index 000000000..55b759a00
--- /dev/null
+++ b/arch/mips/kernel/cps-vec.S
@@ -0,0 +1,493 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/asmmacro.h>
+#include <asm/cacheops.h>
+#include <asm/eva.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/pm.h>
+
+#define GCR_CL_COHERENCE_OFS	0x2008
+#define GCR_CL_ID_OFS		0x2028
+
+.extern mips_cm_base
+
+.set noreorder
+
+	/*
+	 * Set dest to non-zero if the core supports the MT ASE, else zero. If
+	 * MT is not supported then branch to nomt.
+	 */
+	.macro	has_mt	dest, nomt
+	mfc0	\dest, CP0_CONFIG
+	bgez	\dest, \nomt
+	 mfc0	\dest, CP0_CONFIG, 1
+	bgez	\dest, \nomt
+	 mfc0	\dest, CP0_CONFIG, 2
+	bgez	\dest, \nomt
+	 mfc0	\dest, CP0_CONFIG, 3
+	andi	\dest, \dest, MIPS_CONF3_MT
+	beqz	\dest, \nomt
+	.endm
+
+.section .text.cps-vec
+.balign 0x1000
+
+LEAF(mips_cps_core_entry)
+	/*
+	 * These first 12 bytes will be patched by cps_smp_setup to load the
+	 * base address of the CM GCRs into register v1 and the CCA to use into
+	 * register s0.
+	 */
+	.quad	0
+	.word	0
+
+	/* Check whether we're here due to an NMI */
+	mfc0	k0, CP0_STATUS
+	and	k0, k0, ST0_NMI
+	beqz	k0, not_nmi
+	 nop
+
+	/* This is an NMI */
+	la	k0, nmi_handler
+	jr	k0
+	 nop
+
+not_nmi:
+	/* Setup Cause */
+	li	t0, CAUSEF_IV
+	mtc0	t0, CP0_CAUSE
+
+	/* Setup Status */
+	li	t0, ST0_CU1 | ST0_CU0
+	mtc0	t0, CP0_STATUS
+
+	/*
+	 * Clear the bits used to index the caches. Note that the architecture
+	 * dictates that writing to any of TagLo or TagHi selects 0 or 2 should
+	 * be valid for all MIPS32 CPUs, even those for which said writes are
+	 * unnecessary.
+	 */
+	mtc0	zero, CP0_TAGLO, 0
+	mtc0	zero, CP0_TAGHI, 0
+	mtc0	zero, CP0_TAGLO, 2
+	mtc0	zero, CP0_TAGHI, 2
+	ehb
+
+	/* Primary cache configuration is indicated by Config1 */
+	mfc0	v0, CP0_CONFIG, 1
+
+	/* Detect I-cache line size */
+	_EXT	t0, v0, MIPS_CONF1_IL_SHF, MIPS_CONF1_IL_SZ
+	beqz	t0, icache_done
+	 li	t1, 2
+	sllv	t0, t1, t0
+
+	/* Detect I-cache size */
+	_EXT	t1, v0, MIPS_CONF1_IS_SHF, MIPS_CONF1_IS_SZ
+	xori	t2, t1, 0x7
+	beqz	t2, 1f
+	 li	t3, 32
+	addiu	t1, t1, 1
+	sllv	t1, t3, t1
+1:	/* At this point t1 == I-cache sets per way */
+	_EXT	t2, v0, MIPS_CONF1_IA_SHF, MIPS_CONF1_IA_SZ
+	addiu	t2, t2, 1
+	mul	t1, t1, t0
+	mul	t1, t1, t2
+
+	li	a0, KSEG0
+	add	a1, a0, t1
+1:	cache	Index_Store_Tag_I, 0(a0)
+	add	a0, a0, t0
+	bne	a0, a1, 1b
+	 nop
+icache_done:
+
+	/* Detect D-cache line size */
+	_EXT	t0, v0, MIPS_CONF1_DL_SHF, MIPS_CONF1_DL_SZ
+	beqz	t0, dcache_done
+	 li	t1, 2
+	sllv	t0, t1, t0
+
+	/* Detect D-cache size */
+	_EXT	t1, v0, MIPS_CONF1_DS_SHF, MIPS_CONF1_DS_SZ
+	xori	t2, t1, 0x7
+	beqz	t2, 1f
+	 li	t3, 32
+	addiu	t1, t1, 1
+	sllv	t1, t3, t1
+1:	/* At this point t1 == D-cache sets per way */
+	_EXT	t2, v0, MIPS_CONF1_DA_SHF, MIPS_CONF1_DA_SZ
+	addiu	t2, t2, 1
+	mul	t1, t1, t0
+	mul	t1, t1, t2
+
+	li	a0, KSEG0
+	addu	a1, a0, t1
+	subu	a1, a1, t0
+1:	cache	Index_Store_Tag_D, 0(a0)
+	bne	a0, a1, 1b
+	 add	a0, a0, t0
+dcache_done:
+
+	/* Set Kseg0 CCA to that in s0 */
+	mfc0	t0, CP0_CONFIG
+	ori	t0, 0x7
+	xori	t0, 0x7
+	or	t0, t0, s0
+	mtc0	t0, CP0_CONFIG
+	ehb
+
+	/* Enter the coherent domain */
+	li	t0, 0xff
+	sw	t0, GCR_CL_COHERENCE_OFS(v1)
+	ehb
+
+	/* Jump to kseg0 */
+	la	t0, 1f
+	jr	t0
+	 nop
+
+	/*
+	 * We're up, cached & coherent. Perform any further required core-level
+	 * initialisation.
+	 */
+1:	jal	mips_cps_core_init
+	 nop
+
+	/* Do any EVA initialization if necessary */
+	eva_init
+
+	/*
+	 * Boot any other VPEs within this core that should be online, and
+	 * deactivate this VPE if it should be offline.
+	 */
+	jal	mips_cps_boot_vpes
+	 nop
+
+	/* Off we go! */
+	lw	t1, VPEBOOTCFG_PC(v0)
+	lw	gp, VPEBOOTCFG_GP(v0)
+	lw	sp, VPEBOOTCFG_SP(v0)
+	jr	t1
+	 nop
+	END(mips_cps_core_entry)
+
+.org 0x200
+LEAF(excep_tlbfill)
+	b	.
+	 nop
+	END(excep_tlbfill)
+
+.org 0x280
+LEAF(excep_xtlbfill)
+	b	.
+	 nop
+	END(excep_xtlbfill)
+
+.org 0x300
+LEAF(excep_cache)
+	b	.
+	 nop
+	END(excep_cache)
+
+.org 0x380
+LEAF(excep_genex)
+	b	.
+	 nop
+	END(excep_genex)
+
+.org 0x400
+LEAF(excep_intex)
+	b	.
+	 nop
+	END(excep_intex)
+
+.org 0x480
+LEAF(excep_ejtag)
+	la	k0, ejtag_debug_handler
+	jr	k0
+	 nop
+	END(excep_ejtag)
+
+LEAF(mips_cps_core_init)
+#ifdef CONFIG_MIPS_MT
+	/* Check that the core implements the MT ASE */
+	has_mt	t0, 3f
+	 nop
+
+	.set	push
+	.set	mips32r2
+	.set	mt
+
+	/* Only allow 1 TC per VPE to execute... */
+	dmt
+
+	/* ...and for the moment only 1 VPE */
+	dvpe
+	la	t1, 1f
+	jr.hb	t1
+	 nop
+
+	/* Enter VPE configuration state */
+1:	mfc0	t0, CP0_MVPCONTROL
+	ori	t0, t0, MVPCONTROL_VPC
+	mtc0	t0, CP0_MVPCONTROL
+
+	/* Retrieve the number of VPEs within the core */
+	mfc0	t0, CP0_MVPCONF0
+	srl	t0, t0, MVPCONF0_PVPE_SHIFT
+	andi	t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT)
+	addiu	t7, t0, 1
+
+	/* If there's only 1, we're done */
+	beqz	t0, 2f
+	 nop
+
+	/* Loop through each VPE within this core */
+	li	t5, 1
+
+1:	/* Operate on the appropriate TC */
+	mtc0	t5, CP0_VPECONTROL
+	ehb
+
+	/* Bind TC to VPE (1:1 TC:VPE mapping) */
+	mttc0	t5, CP0_TCBIND
+
+	/* Set exclusive TC, non-active, master */
+	li	t0, VPECONF0_MVP
+	sll	t1, t5, VPECONF0_XTC_SHIFT
+	or	t0, t0, t1
+	mttc0	t0, CP0_VPECONF0
+
+	/* Set TC non-active, non-allocatable */
+	mttc0	zero, CP0_TCSTATUS
+
+	/* Set TC halted */
+	li	t0, TCHALT_H
+	mttc0	t0, CP0_TCHALT
+
+	/* Next VPE */
+	addiu	t5, t5, 1
+	slt	t0, t5, t7
+	bnez	t0, 1b
+	 nop
+
+	/* Leave VPE configuration state */
+2:	mfc0	t0, CP0_MVPCONTROL
+	xori	t0, t0, MVPCONTROL_VPC
+	mtc0	t0, CP0_MVPCONTROL
+
+3:	.set	pop
+#endif
+	jr	ra
+	 nop
+	END(mips_cps_core_init)
+
+LEAF(mips_cps_boot_vpes)
+	/* Retrieve CM base address */
+	la	t0, mips_cm_base
+	lw	t0, 0(t0)
+
+	/* Calculate a pointer to this cores struct core_boot_config */
+	lw	t0, GCR_CL_ID_OFS(t0)
+	li	t1, COREBOOTCFG_SIZE
+	mul	t0, t0, t1
+	la	t1, mips_cps_core_bootcfg
+	lw	t1, 0(t1)
+	addu	t0, t0, t1
+
+	/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
+	has_mt	t6, 1f
+	 li	t9, 0
+
+	/* Find the number of VPEs present in the core */
+	mfc0	t1, CP0_MVPCONF0
+	srl	t1, t1, MVPCONF0_PVPE_SHIFT
+	andi	t1, t1, MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT
+	addiu	t1, t1, 1
+
+	/* Calculate a mask for the VPE ID from EBase.CPUNum */
+	clz	t1, t1
+	li	t2, 31
+	subu	t1, t2, t1
+	li	t2, 1
+	sll	t1, t2, t1
+	addiu	t1, t1, -1
+
+	/* Retrieve the VPE ID from EBase.CPUNum */
+	mfc0	t9, $15, 1
+	and	t9, t9, t1
+
+1:	/* Calculate a pointer to this VPEs struct vpe_boot_config */
+	li	t1, VPEBOOTCFG_SIZE
+	mul	v0, t9, t1
+	lw	t7, COREBOOTCFG_VPECONFIG(t0)
+	addu	v0, v0, t7
+
+#ifdef CONFIG_MIPS_MT
+
+	/* If the core doesn't support MT then return */
+	bnez	t6, 1f
+	 nop
+	jr	ra
+	 nop
+
+	.set	push
+	.set	mips32r2
+	.set	mt
+
+1:	/* Enter VPE configuration state */
+	dvpe
+	la	t1, 1f
+	jr.hb	t1
+	 nop
+1:	mfc0	t1, CP0_MVPCONTROL
+	ori	t1, t1, MVPCONTROL_VPC
+	mtc0	t1, CP0_MVPCONTROL
+	ehb
+
+	/* Loop through each VPE */
+	lw	t6, COREBOOTCFG_VPEMASK(t0)
+	move	t8, t6
+	li	t5, 0
+
+	/* Check whether the VPE should be running. If not, skip it */
+1:	andi	t0, t6, 1
+	beqz	t0, 2f
+	 nop
+
+	/* Operate on the appropriate TC */
+	mfc0	t0, CP0_VPECONTROL
+	ori	t0, t0, VPECONTROL_TARGTC
+	xori	t0, t0, VPECONTROL_TARGTC
+	or	t0, t0, t5
+	mtc0	t0, CP0_VPECONTROL
+	ehb
+
+	/* Skip the VPE if its TC is not halted */
+	mftc0	t0, CP0_TCHALT
+	beqz	t0, 2f
+	 nop
+
+	/* Calculate a pointer to the VPEs struct vpe_boot_config */
+	li	t0, VPEBOOTCFG_SIZE
+	mul	t0, t0, t5
+	addu	t0, t0, t7
+
+	/* Set the TC restart PC */
+	lw	t1, VPEBOOTCFG_PC(t0)
+	mttc0	t1, CP0_TCRESTART
+
+	/* Set the TC stack pointer */
+	lw	t1, VPEBOOTCFG_SP(t0)
+	mttgpr	t1, sp
+
+	/* Set the TC global pointer */
+	lw	t1, VPEBOOTCFG_GP(t0)
+	mttgpr	t1, gp
+
+	/* Copy config from this VPE */
+	mfc0	t0, CP0_CONFIG
+	mttc0	t0, CP0_CONFIG
+
+	/* Ensure no software interrupts are pending */
+	mttc0	zero, CP0_CAUSE
+	mttc0	zero, CP0_STATUS
+
+	/* Set TC active, not interrupt exempt */
+	mftc0	t0, CP0_TCSTATUS
+	li	t1, ~TCSTATUS_IXMT
+	and	t0, t0, t1
+	ori	t0, t0, TCSTATUS_A
+	mttc0	t0, CP0_TCSTATUS
+
+	/* Clear the TC halt bit */
+	mttc0	zero, CP0_TCHALT
+
+	/* Set VPE active */
+	mftc0	t0, CP0_VPECONF0
+	ori	t0, t0, VPECONF0_VPA
+	mttc0	t0, CP0_VPECONF0
+
+	/* Next VPE */
+2:	srl	t6, t6, 1
+	addiu	t5, t5, 1
+	bnez	t6, 1b
+	 nop
+
+	/* Leave VPE configuration state */
+	mfc0	t1, CP0_MVPCONTROL
+	xori	t1, t1, MVPCONTROL_VPC
+	mtc0	t1, CP0_MVPCONTROL
+	ehb
+	evpe
+
+	/* Check whether this VPE is meant to be running */
+	li	t0, 1
+	sll	t0, t0, t9
+	and	t0, t0, t8
+	bnez	t0, 2f
+	 nop
+
+	/* This VPE should be offline, halt the TC */
+	li	t0, TCHALT_H
+	mtc0	t0, CP0_TCHALT
+	la	t0, 1f
+1:	jr.hb	t0
+	 nop
+
+2:	.set	pop
+
+#endif /* CONFIG_MIPS_MT */
+
+	/* Return */
+	jr	ra
+	 nop
+	END(mips_cps_boot_vpes)
+
+#if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM)
+
+	/* Calculate a pointer to this CPUs struct mips_static_suspend_state */
+	.macro	psstate	dest
+	.set	push
+	.set	noat
+	lw	$1, TI_CPU(gp)
+	sll	$1, $1, LONGLOG
+	la	\dest, __per_cpu_offset
+	addu	$1, $1, \dest
+	lw	$1, 0($1)
+	la	\dest, cps_cpu_state
+	addu	\dest, \dest, $1
+	.set	pop
+	.endm
+
+LEAF(mips_cps_pm_save)
+	/* Save CPU state */
+	SUSPEND_SAVE_REGS
+	psstate	t1
+	SUSPEND_SAVE_STATIC
+	jr	v0
+	 nop
+	END(mips_cps_pm_save)
+
+LEAF(mips_cps_pm_restore)
+	/* Restore CPU state */
+	psstate	t1
+	RESUME_RESTORE_STATIC
+	RESUME_RESTORE_REGS_RETURN
+	END(mips_cps_pm_restore)
+
+#endif /* CONFIG_MIPS_CPS_PM && CONFIG_CPU_PM */
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
new file mode 100644
index 000000000..09f4034f2
--- /dev/null
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -0,0 +1,327 @@
+/*
+ * Copyright (C) 2003, 2004, 2007  Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/context_tracking.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/stddef.h>
+
+#include <asm/bugs.h>
+#include <asm/compiler.h>
+#include <asm/cpu.h>
+#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/setup.h>
+
+static char bug64hit[] __initdata =
+	"reliable operation impossible!\n%s";
+static char nowar[] __initdata =
+	"Please report to <linux-mips@linux-mips.org>.";
+static char r4kwar[] __initdata =
+	"Enable CPU_R4000_WORKAROUNDS to rectify.";
+static char daddiwar[] __initdata =
+	"Enable CPU_DADDI_WORKAROUNDS to rectify.";
+
+static inline void align_mod(const int align, const int mod)
+{
+	asm volatile(
+		".set	push\n\t"
+		".set	noreorder\n\t"
+		".balign %0\n\t"
+		".rept	%1\n\t"
+		"nop\n\t"
+		".endr\n\t"
+		".set	pop"
+		:
+		: GCC_IMM_ASM() (align), GCC_IMM_ASM() (mod));
+}
+
+static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
+				     const int align, const int mod)
+{
+	unsigned long flags;
+	int m1, m2;
+	long p, s, lv1, lv2, lw;
+
+	/*
+	 * We want the multiply and the shift to be isolated from the
+	 * rest of the code to disable gcc optimizations.  Hence the
+	 * asm statements that execute nothing, but make gcc not know
+	 * what the values of m1, m2 and s are and what lv2 and p are
+	 * used for.
+	 */
+
+	local_irq_save(flags);
+	/*
+	 * The following code leads to a wrong result of the first
+	 * dsll32 when executed on R4000 rev. 2.2 or 3.0 (PRId
+	 * 00000422 or 00000430, respectively).
+	 *
+	 * See "MIPS R4000PC/SC Errata, Processor Revision 2.2 and
+	 * 3.0" by MIPS Technologies, Inc., errata #16 and #28 for
+	 * details.  I got no permission to duplicate them here,
+	 * sigh... --macro
+	 */
+	asm volatile(
+		""
+		: "=r" (m1), "=r" (m2), "=r" (s)
+		: "0" (5), "1" (8), "2" (5));
+	align_mod(align, mod);
+	/*
+	 * The trailing nop is needed to fulfill the two-instruction
+	 * requirement between reading hi/lo and staring a mult/div.
+	 * Leaving it out may cause gas insert a nop itself breaking
+	 * the desired alignment of the next chunk.
+	 */
+	asm volatile(
+		".set	push\n\t"
+		".set	noat\n\t"
+		".set	noreorder\n\t"
+		".set	nomacro\n\t"
+		"mult	%2, %3\n\t"
+		"dsll32 %0, %4, %5\n\t"
+		"mflo	$0\n\t"
+		"dsll32 %1, %4, %5\n\t"
+		"nop\n\t"
+		".set	pop"
+		: "=&r" (lv1), "=r" (lw)
+		: "r" (m1), "r" (m2), "r" (s), "I" (0)
+		: "hi", "lo", GCC_REG_ACCUM);
+	/* We have to use single integers for m1 and m2 and a double
+	 * one for p to be sure the mulsidi3 gcc's RTL multiplication
+	 * instruction has the workaround applied.  Older versions of
+	 * gcc have correct umulsi3 and mulsi3, but other
+	 * multiplication variants lack the workaround.
+	 */
+	asm volatile(
+		""
+		: "=r" (m1), "=r" (m2), "=r" (s)
+		: "0" (m1), "1" (m2), "2" (s));
+	align_mod(align, mod);
+	p = m1 * m2;
+	lv2 = s << 32;
+	asm volatile(
+		""
+		: "=r" (lv2)
+		: "0" (lv2), "r" (p));
+	local_irq_restore(flags);
+
+	*v1 = lv1;
+	*v2 = lv2;
+	*w = lw;
+}
+
+static inline void check_mult_sh(void)
+{
+	long v1[8], v2[8], w[8];
+	int bug, fix, i;
+
+	printk("Checking for the multiply/shift bug... ");
+
+	/*
+	 * Testing discovered false negatives for certain code offsets
+	 * into cache lines.  Hence we test all possible offsets for
+	 * the worst assumption of an R4000 I-cache line width of 32
+	 * bytes.
+	 *
+	 * We can't use a loop as alignment directives need to be
+	 * immediates.
+	 */
+	mult_sh_align_mod(&v1[0], &v2[0], &w[0], 32, 0);
+	mult_sh_align_mod(&v1[1], &v2[1], &w[1], 32, 1);
+	mult_sh_align_mod(&v1[2], &v2[2], &w[2], 32, 2);
+	mult_sh_align_mod(&v1[3], &v2[3], &w[3], 32, 3);
+	mult_sh_align_mod(&v1[4], &v2[4], &w[4], 32, 4);
+	mult_sh_align_mod(&v1[5], &v2[5], &w[5], 32, 5);
+	mult_sh_align_mod(&v1[6], &v2[6], &w[6], 32, 6);
+	mult_sh_align_mod(&v1[7], &v2[7], &w[7], 32, 7);
+
+	bug = 0;
+	for (i = 0; i < 8; i++)
+		if (v1[i] != w[i])
+			bug = 1;
+
+	if (bug == 0) {
+		printk("no.\n");
+		return;
+	}
+
+	printk("yes, workaround... ");
+
+	fix = 1;
+	for (i = 0; i < 8; i++)
+		if (v2[i] != w[i])
+			fix = 0;
+
+	if (fix == 1) {
+		printk("yes.\n");
+		return;
+	}
+
+	printk("no.\n");
+	panic(bug64hit, !R4000_WAR ? r4kwar : nowar);
+}
+
+static volatile int daddi_ov;
+
+asmlinkage void __init do_daddi_ov(struct pt_regs *regs)
+{
+	enum ctx_state prev_state;
+
+	prev_state = exception_enter();
+	daddi_ov = 1;
+	regs->cp0_epc += 4;
+	exception_exit(prev_state);
+}
+
+static inline void check_daddi(void)
+{
+	extern asmlinkage void handle_daddi_ov(void);
+	unsigned long flags;
+	void *handler;
+	long v, tmp;
+
+	printk("Checking for the daddi bug... ");
+
+	local_irq_save(flags);
+	handler = set_except_vector(12, handle_daddi_ov);
+	/*
+	 * The following code fails to trigger an overflow exception
+	 * when executed on R4000 rev. 2.2 or 3.0 (PRId 00000422 or
+	 * 00000430, respectively).
+	 *
+	 * See "MIPS R4000PC/SC Errata, Processor Revision 2.2 and
+	 * 3.0" by MIPS Technologies, Inc., erratum #23 for details.
+	 * I got no permission to duplicate it here, sigh... --macro
+	 */
+	asm volatile(
+		".set	push\n\t"
+		".set	noat\n\t"
+		".set	noreorder\n\t"
+		".set	nomacro\n\t"
+		"addiu	%1, $0, %2\n\t"
+		"dsrl	%1, %1, 1\n\t"
+#ifdef HAVE_AS_SET_DADDI
+		".set	daddi\n\t"
+#endif
+		"daddi	%0, %1, %3\n\t"
+		".set	pop"
+		: "=r" (v), "=&r" (tmp)
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
+	set_except_vector(12, handler);
+	local_irq_restore(flags);
+
+	if (daddi_ov) {
+		printk("no.\n");
+		return;
+	}
+
+	printk("yes, workaround... ");
+
+	local_irq_save(flags);
+	handler = set_except_vector(12, handle_daddi_ov);
+	asm volatile(
+		"addiu	%1, $0, %2\n\t"
+		"dsrl	%1, %1, 1\n\t"
+		"daddi	%0, %1, %3"
+		: "=r" (v), "=&r" (tmp)
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
+	set_except_vector(12, handler);
+	local_irq_restore(flags);
+
+	if (daddi_ov) {
+		printk("yes.\n");
+		return;
+	}
+
+	printk("no.\n");
+	panic(bug64hit, !DADDI_WAR ? daddiwar : nowar);
+}
+
+int daddiu_bug	= config_enabled(CONFIG_CPU_MIPSR6) ? 0 : -1;
+
+static inline void check_daddiu(void)
+{
+	long v, w, tmp;
+
+	printk("Checking for the daddiu bug... ");
+
+	/*
+	 * The following code leads to a wrong result of daddiu when
+	 * executed on R4400 rev. 1.0 (PRId 00000440).
+	 *
+	 * See "MIPS R4400PC/SC Errata, Processor Revision 1.0" by
+	 * MIPS Technologies, Inc., erratum #7 for details.
+	 *
+	 * According to "MIPS R4000PC/SC Errata, Processor Revision
+	 * 2.2 and 3.0" by MIPS Technologies, Inc., erratum #41 this
+	 * problem affects R4000 rev. 2.2 and 3.0 (PRId 00000422 and
+	 * 00000430, respectively), too.  Testing failed to trigger it
+	 * so far.
+	 *
+	 * I got no permission to duplicate the errata here, sigh...
+	 * --macro
+	 */
+	asm volatile(
+		".set	push\n\t"
+		".set	noat\n\t"
+		".set	noreorder\n\t"
+		".set	nomacro\n\t"
+		"addiu	%2, $0, %3\n\t"
+		"dsrl	%2, %2, 1\n\t"
+#ifdef HAVE_AS_SET_DADDI
+		".set	daddi\n\t"
+#endif
+		"daddiu %0, %2, %4\n\t"
+		"addiu	%1, $0, %4\n\t"
+		"daddu	%1, %2\n\t"
+		".set	pop"
+		: "=&r" (v), "=&r" (w), "=&r" (tmp)
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
+
+	daddiu_bug = v != w;
+
+	if (!daddiu_bug) {
+		printk("no.\n");
+		return;
+	}
+
+	printk("yes, workaround... ");
+
+	asm volatile(
+		"addiu	%2, $0, %3\n\t"
+		"dsrl	%2, %2, 1\n\t"
+		"daddiu %0, %2, %4\n\t"
+		"addiu	%1, $0, %4\n\t"
+		"daddu	%1, %2"
+		: "=&r" (v), "=&r" (w), "=&r" (tmp)
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
+
+	if (v == w) {
+		printk("yes.\n");
+		return;
+	}
+
+	printk("no.\n");
+	panic(bug64hit, !DADDI_WAR ? daddiwar : nowar);
+}
+
+void __init check_bugs64_early(void)
+{
+	if (!config_enabled(CONFIG_CPU_MIPSR6)) {
+		check_mult_sh();
+		check_daddiu();
+	}
+}
+
+void __init check_bugs64(void)
+{
+	if (!config_enabled(CONFIG_CPU_MIPSR6))
+		check_daddi();
+}
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
new file mode 100644
index 000000000..209e5b76c
--- /dev/null
+++ b/arch/mips/kernel/cpu-probe.c
@@ -0,0 +1,1513 @@
+/*
+ * Processor capabilities determination functions.
+ *
+ * Copyright (C) xxxx  the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
+ * Copyright (C) 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2001, 2004, 2011, 2012	 MIPS Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/export.h>
+
+#include <asm/bugs.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
+#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/msa.h>
+#include <asm/watch.h>
+#include <asm/elf.h>
+#include <asm/pgtable-bits.h>
+#include <asm/spram.h>
+#include <asm/uaccess.h>
+
+/*
+ * Get the FPU Implementation/Revision.
+ */
+static inline unsigned long cpu_get_fpu_id(void)
+{
+	unsigned long tmp, fpu_id;
+
+	tmp = read_c0_status();
+	__enable_fpu(FPU_AS_IS);
+	fpu_id = read_32bit_cp1_register(CP1_REVISION);
+	write_c0_status(tmp);
+	return fpu_id;
+}
+
+/*
+ * Check if the CPU has an external FPU.
+ */
+static inline int __cpu_has_fpu(void)
+{
+	return (cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE;
+}
+
+static inline unsigned long cpu_get_msa_id(void)
+{
+	unsigned long status, msa_id;
+
+	status = read_c0_status();
+	__enable_fpu(FPU_64BIT);
+	enable_msa();
+	msa_id = read_msa_ir();
+	disable_msa();
+	write_c0_status(status);
+	return msa_id;
+}
+
+/*
+ * Determine the FCSR mask for FPU hardware.
+ */
+static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_mips *c)
+{
+	unsigned long sr, mask, fcsr, fcsr0, fcsr1;
+
+	fcsr = c->fpu_csr31;
+	mask = FPU_CSR_ALL_X | FPU_CSR_ALL_E | FPU_CSR_ALL_S | FPU_CSR_RM;
+
+	sr = read_c0_status();
+	__enable_fpu(FPU_AS_IS);
+
+	fcsr0 = fcsr & mask;
+	write_32bit_cp1_register(CP1_STATUS, fcsr0);
+	fcsr0 = read_32bit_cp1_register(CP1_STATUS);
+
+	fcsr1 = fcsr | ~mask;
+	write_32bit_cp1_register(CP1_STATUS, fcsr1);
+	fcsr1 = read_32bit_cp1_register(CP1_STATUS);
+
+	write_32bit_cp1_register(CP1_STATUS, fcsr);
+
+	write_c0_status(sr);
+
+	c->fpu_msk31 = ~(fcsr0 ^ fcsr1) & ~mask;
+}
+
+/*
+ * Set the FIR feature flags for the FPU emulator.
+ */
+static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
+{
+	u32 value;
+
+	value = 0;
+	if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+			    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
+		value |= MIPS_FPIR_D | MIPS_FPIR_S;
+	if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
+		value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W;
+	c->fpu_id = value;
+}
+
+/* Determined FPU emulator mask to use for the boot CPU with "nofpu".  */
+static unsigned int mips_nofpu_msk31;
+
+/*
+ * Set options for FPU hardware.
+ */
+static void cpu_set_fpu_opts(struct cpuinfo_mips *c)
+{
+	c->fpu_id = cpu_get_fpu_id();
+	mips_nofpu_msk31 = c->fpu_msk31;
+
+	if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+			    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+		if (c->fpu_id & MIPS_FPIR_3D)
+			c->ases |= MIPS_ASE_MIPS3D;
+		if (c->fpu_id & MIPS_FPIR_FREP)
+			c->options |= MIPS_CPU_FRE;
+	}
+
+	cpu_set_fpu_fcsr_mask(c);
+}
+
+/*
+ * Set options for the FPU emulator.
+ */
+static void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
+{
+	c->options &= ~MIPS_CPU_FPU;
+	c->fpu_msk31 = mips_nofpu_msk31;
+
+	cpu_set_nofpu_id(c);
+}
+
+static int mips_fpu_disabled;
+
+static int __init fpu_disable(char *s)
+{
+	cpu_set_nofpu_opts(&boot_cpu_data);
+	mips_fpu_disabled = 1;
+
+	return 1;
+}
+
+__setup("nofpu", fpu_disable);
+
+int mips_dsp_disabled;
+
+static int __init dsp_disable(char *s)
+{
+	cpu_data[0].ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P);
+	mips_dsp_disabled = 1;
+
+	return 1;
+}
+
+__setup("nodsp", dsp_disable);
+
+static int mips_htw_disabled;
+
+static int __init htw_disable(char *s)
+{
+	mips_htw_disabled = 1;
+	cpu_data[0].options &= ~MIPS_CPU_HTW;
+	write_c0_pwctl(read_c0_pwctl() &
+		       ~(1 << MIPS_PWCTL_PWEN_SHIFT));
+
+	return 1;
+}
+
+__setup("nohtw", htw_disable);
+
+static int mips_ftlb_disabled;
+static int mips_has_ftlb_configured;
+
+static void set_ftlb_enable(struct cpuinfo_mips *c, int enable);
+
+static int __init ftlb_disable(char *s)
+{
+	unsigned int config4, mmuextdef;
+
+	/*
+	 * If the core hasn't done any FTLB configuration, there is nothing
+	 * for us to do here.
+	 */
+	if (!mips_has_ftlb_configured)
+		return 1;
+
+	/* Disable it in the boot cpu */
+	set_ftlb_enable(&cpu_data[0], 0);
+
+	back_to_back_c0_hazard();
+
+	config4 = read_c0_config4();
+
+	/* Check that FTLB has been disabled */
+	mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
+	/* MMUSIZEEXT == VTLB ON, FTLB OFF */
+	if (mmuextdef == MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT) {
+		/* This should never happen */
+		pr_warn("FTLB could not be disabled!\n");
+		return 1;
+	}
+
+	mips_ftlb_disabled = 1;
+	mips_has_ftlb_configured = 0;
+
+	/*
+	 * noftlb is mainly used for debug purposes so print
+	 * an informative message instead of using pr_debug()
+	 */
+	pr_info("FTLB has been disabled\n");
+
+	/*
+	 * Some of these bits are duplicated in the decode_config4.
+	 * MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT is the only possible case
+	 * once FTLB has been disabled so undo what decode_config4 did.
+	 */
+	cpu_data[0].tlbsize -= cpu_data[0].tlbsizeftlbways *
+			       cpu_data[0].tlbsizeftlbsets;
+	cpu_data[0].tlbsizeftlbsets = 0;
+	cpu_data[0].tlbsizeftlbways = 0;
+
+	return 1;
+}
+
+__setup("noftlb", ftlb_disable);
+
+
+static inline void check_errata(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	switch (current_cpu_type()) {
+	case CPU_34K:
+		/*
+		 * Erratum "RPS May Cause Incorrect Instruction Execution"
+		 * This code only handles VPE0, any SMP/RTOS code
+		 * making use of VPE1 will be responsable for that VPE.
+		 */
+		if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)
+			write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS);
+		break;
+	default:
+		break;
+	}
+}
+
+void __init check_bugs32(void)
+{
+	check_errata();
+}
+
+/*
+ * Probe whether cpu has config register by trying to play with
+ * alternate cache bit and see whether it matters.
+ * It's used by cpu_probe to distinguish between R3000A and R3081.
+ */
+static inline int cpu_has_confreg(void)
+{
+#ifdef CONFIG_CPU_R3000
+	extern unsigned long r3k_cache_size(unsigned long);
+	unsigned long size1, size2;
+	unsigned long cfg = read_c0_conf();
+
+	size1 = r3k_cache_size(ST0_ISC);
+	write_c0_conf(cfg ^ R30XX_CONF_AC);
+	size2 = r3k_cache_size(ST0_ISC);
+	write_c0_conf(cfg);
+	return size1 != size2;
+#else
+	return 0;
+#endif
+}
+
+static inline void set_elf_platform(int cpu, const char *plat)
+{
+	if (cpu == 0)
+		__elf_platform = plat;
+}
+
+static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
+{
+#ifdef __NEED_VMBITS_PROBE
+	write_c0_entryhi(0x3fffffffffffe000ULL);
+	back_to_back_c0_hazard();
+	c->vmbits = fls64(read_c0_entryhi() & 0x3fffffffffffe000ULL);
+#endif
+}
+
+static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
+{
+	switch (isa) {
+	case MIPS_CPU_ISA_M64R2:
+		c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2;
+	case MIPS_CPU_ISA_M64R1:
+		c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1;
+	case MIPS_CPU_ISA_V:
+		c->isa_level |= MIPS_CPU_ISA_V;
+	case MIPS_CPU_ISA_IV:
+		c->isa_level |= MIPS_CPU_ISA_IV;
+	case MIPS_CPU_ISA_III:
+		c->isa_level |= MIPS_CPU_ISA_II | MIPS_CPU_ISA_III;
+		break;
+
+	/* R6 incompatible with everything else */
+	case MIPS_CPU_ISA_M64R6:
+		c->isa_level |= MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6;
+	case MIPS_CPU_ISA_M32R6:
+		c->isa_level |= MIPS_CPU_ISA_M32R6;
+		/* Break here so we don't add incompatible ISAs */
+		break;
+	case MIPS_CPU_ISA_M32R2:
+		c->isa_level |= MIPS_CPU_ISA_M32R2;
+	case MIPS_CPU_ISA_M32R1:
+		c->isa_level |= MIPS_CPU_ISA_M32R1;
+	case MIPS_CPU_ISA_II:
+		c->isa_level |= MIPS_CPU_ISA_II;
+		break;
+	}
+}
+
+static char unknown_isa[] = KERN_ERR \
+	"Unsupported ISA type, c0.config0: %d.";
+
+static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c)
+{
+
+	unsigned int probability = c->tlbsize / c->tlbsizevtlb;
+
+	/*
+	 * 0 = All TLBWR instructions go to FTLB
+	 * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the
+	 * FTLB and 1 goes to the VTLB.
+	 * 2 = 7:1: As above with 7:1 ratio.
+	 * 3 = 3:1: As above with 3:1 ratio.
+	 *
+	 * Use the linear midpoint as the probability threshold.
+	 */
+	if (probability >= 12)
+		return 1;
+	else if (probability >= 6)
+		return 2;
+	else
+		/*
+		 * So FTLB is less than 4 times bigger than VTLB.
+		 * A 3:1 ratio can still be useful though.
+		 */
+		return 3;
+}
+
+static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
+{
+	unsigned int config6;
+
+	/* It's implementation dependent how the FTLB can be enabled */
+	switch (c->cputype) {
+	case CPU_PROAPTIV:
+	case CPU_P5600:
+		/* proAptiv & related cores use Config6 to enable the FTLB */
+		config6 = read_c0_config6();
+		/* Clear the old probability value */
+		config6 &= ~(3 << MIPS_CONF6_FTLBP_SHIFT);
+		if (enable)
+			/* Enable FTLB */
+			write_c0_config6(config6 |
+					 (calculate_ftlb_probability(c)
+					  << MIPS_CONF6_FTLBP_SHIFT)
+					 | MIPS_CONF6_FTLBEN);
+		else
+			/* Disable FTLB */
+			write_c0_config6(config6 &  ~MIPS_CONF6_FTLBEN);
+		back_to_back_c0_hazard();
+		break;
+	}
+}
+
+static inline unsigned int decode_config0(struct cpuinfo_mips *c)
+{
+	unsigned int config0;
+	int isa;
+
+	config0 = read_c0_config();
+
+	/*
+	 * Look for Standard TLB or Dual VTLB and FTLB
+	 */
+	if ((((config0 & MIPS_CONF_MT) >> 7) == 1) ||
+	    (((config0 & MIPS_CONF_MT) >> 7) == 4))
+		c->options |= MIPS_CPU_TLB;
+
+	isa = (config0 & MIPS_CONF_AT) >> 13;
+	switch (isa) {
+	case 0:
+		switch ((config0 & MIPS_CONF_AR) >> 10) {
+		case 0:
+			set_isa(c, MIPS_CPU_ISA_M32R1);
+			break;
+		case 1:
+			set_isa(c, MIPS_CPU_ISA_M32R2);
+			break;
+		case 2:
+			set_isa(c, MIPS_CPU_ISA_M32R6);
+			break;
+		default:
+			goto unknown;
+		}
+		break;
+	case 2:
+		switch ((config0 & MIPS_CONF_AR) >> 10) {
+		case 0:
+			set_isa(c, MIPS_CPU_ISA_M64R1);
+			break;
+		case 1:
+			set_isa(c, MIPS_CPU_ISA_M64R2);
+			break;
+		case 2:
+			set_isa(c, MIPS_CPU_ISA_M64R6);
+			break;
+		default:
+			goto unknown;
+		}
+		break;
+	default:
+		goto unknown;
+	}
+
+	return config0 & MIPS_CONF_M;
+
+unknown:
+	panic(unknown_isa, config0);
+}
+
+static inline unsigned int decode_config1(struct cpuinfo_mips *c)
+{
+	unsigned int config1;
+
+	config1 = read_c0_config1();
+
+	if (config1 & MIPS_CONF1_MD)
+		c->ases |= MIPS_ASE_MDMX;
+	if (config1 & MIPS_CONF1_WR)
+		c->options |= MIPS_CPU_WATCH;
+	if (config1 & MIPS_CONF1_CA)
+		c->ases |= MIPS_ASE_MIPS16;
+	if (config1 & MIPS_CONF1_EP)
+		c->options |= MIPS_CPU_EJTAG;
+	if (config1 & MIPS_CONF1_FP) {
+		c->options |= MIPS_CPU_FPU;
+		c->options |= MIPS_CPU_32FPR;
+	}
+	if (cpu_has_tlb) {
+		c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
+		c->tlbsizevtlb = c->tlbsize;
+		c->tlbsizeftlbsets = 0;
+	}
+
+	return config1 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config2(struct cpuinfo_mips *c)
+{
+	unsigned int config2;
+
+	config2 = read_c0_config2();
+
+	if (config2 & MIPS_CONF2_SL)
+		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+
+	return config2 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config3(struct cpuinfo_mips *c)
+{
+	unsigned int config3;
+
+	config3 = read_c0_config3();
+
+	if (config3 & MIPS_CONF3_SM) {
+		c->ases |= MIPS_ASE_SMARTMIPS;
+		c->options |= MIPS_CPU_RIXI;
+	}
+	if (config3 & MIPS_CONF3_RXI)
+		c->options |= MIPS_CPU_RIXI;
+	if (config3 & MIPS_CONF3_DSP)
+		c->ases |= MIPS_ASE_DSP;
+	if (config3 & MIPS_CONF3_DSP2P)
+		c->ases |= MIPS_ASE_DSP2P;
+	if (config3 & MIPS_CONF3_VINT)
+		c->options |= MIPS_CPU_VINT;
+	if (config3 & MIPS_CONF3_VEIC)
+		c->options |= MIPS_CPU_VEIC;
+	if (config3 & MIPS_CONF3_MT)
+		c->ases |= MIPS_ASE_MIPSMT;
+	if (config3 & MIPS_CONF3_ULRI)
+		c->options |= MIPS_CPU_ULRI;
+	if (config3 & MIPS_CONF3_ISA)
+		c->options |= MIPS_CPU_MICROMIPS;
+	if (config3 & MIPS_CONF3_VZ)
+		c->ases |= MIPS_ASE_VZ;
+	if (config3 & MIPS_CONF3_SC)
+		c->options |= MIPS_CPU_SEGMENTS;
+	if (config3 & MIPS_CONF3_MSA)
+		c->ases |= MIPS_ASE_MSA;
+	/* Only tested on 32-bit cores */
+	if ((config3 & MIPS_CONF3_PW) && config_enabled(CONFIG_32BIT)) {
+		c->htw_seq = 0;
+		c->options |= MIPS_CPU_HTW;
+	}
+	if (config3 & MIPS_CONF3_CDMM)
+		c->options |= MIPS_CPU_CDMM;
+
+	return config3 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config4(struct cpuinfo_mips *c)
+{
+	unsigned int config4;
+	unsigned int newcf4;
+	unsigned int mmuextdef;
+	unsigned int ftlb_page = MIPS_CONF4_FTLBPAGESIZE;
+
+	config4 = read_c0_config4();
+
+	if (cpu_has_tlb) {
+		if (((config4 & MIPS_CONF4_IE) >> 29) == 2)
+			c->options |= MIPS_CPU_TLBINV;
+		mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
+		switch (mmuextdef) {
+		case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT:
+			c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40;
+			c->tlbsizevtlb = c->tlbsize;
+			break;
+		case MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT:
+			c->tlbsizevtlb +=
+				((config4 & MIPS_CONF4_VTLBSIZEEXT) >>
+				  MIPS_CONF4_VTLBSIZEEXT_SHIFT) * 0x40;
+			c->tlbsize = c->tlbsizevtlb;
+			ftlb_page = MIPS_CONF4_VFTLBPAGESIZE;
+			/* fall through */
+		case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT:
+			if (mips_ftlb_disabled)
+				break;
+			newcf4 = (config4 & ~ftlb_page) |
+				(page_size_ftlb(mmuextdef) <<
+				 MIPS_CONF4_FTLBPAGESIZE_SHIFT);
+			write_c0_config4(newcf4);
+			back_to_back_c0_hazard();
+			config4 = read_c0_config4();
+			if (config4 != newcf4) {
+				pr_err("PAGE_SIZE 0x%lx is not supported by FTLB (config4=0x%x)\n",
+				       PAGE_SIZE, config4);
+				/* Switch FTLB off */
+				set_ftlb_enable(c, 0);
+				break;
+			}
+			c->tlbsizeftlbsets = 1 <<
+				((config4 & MIPS_CONF4_FTLBSETS) >>
+				 MIPS_CONF4_FTLBSETS_SHIFT);
+			c->tlbsizeftlbways = ((config4 & MIPS_CONF4_FTLBWAYS) >>
+					      MIPS_CONF4_FTLBWAYS_SHIFT) + 2;
+			c->tlbsize += c->tlbsizeftlbways * c->tlbsizeftlbsets;
+			mips_has_ftlb_configured = 1;
+			break;
+		}
+	}
+
+	c->kscratch_mask = (config4 >> 16) & 0xff;
+
+	return config4 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config5(struct cpuinfo_mips *c)
+{
+	unsigned int config5;
+
+	config5 = read_c0_config5();
+	config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE);
+	write_c0_config5(config5);
+
+	if (config5 & MIPS_CONF5_EVA)
+		c->options |= MIPS_CPU_EVA;
+	if (config5 & MIPS_CONF5_MRP)
+		c->options |= MIPS_CPU_MAAR;
+	if (config5 & MIPS_CONF5_LLB)
+		c->options |= MIPS_CPU_RW_LLB;
+#ifdef CONFIG_XPA
+	if (config5 & MIPS_CONF5_MVH)
+		c->options |= MIPS_CPU_XPA;
+#endif
+
+	return config5 & MIPS_CONF_M;
+}
+
+static void decode_configs(struct cpuinfo_mips *c)
+{
+	int ok;
+
+	/* MIPS32 or MIPS64 compliant CPU.  */
+	c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
+		     MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
+
+	c->scache.flags = MIPS_CACHE_NOT_PRESENT;
+
+	/* Enable FTLB if present and not disabled */
+	set_ftlb_enable(c, !mips_ftlb_disabled);
+
+	ok = decode_config0(c);			/* Read Config registers.  */
+	BUG_ON(!ok);				/* Arch spec violation!	 */
+	if (ok)
+		ok = decode_config1(c);
+	if (ok)
+		ok = decode_config2(c);
+	if (ok)
+		ok = decode_config3(c);
+	if (ok)
+		ok = decode_config4(c);
+	if (ok)
+		ok = decode_config5(c);
+
+	mips_probe_watch_registers(c);
+
+	if (cpu_has_rixi) {
+		/* Enable the RIXI exceptions */
+		set_c0_pagegrain(PG_IEC);
+		back_to_back_c0_hazard();
+		/* Verify the IEC bit is set */
+		if (read_c0_pagegrain() & PG_IEC)
+			c->options |= MIPS_CPU_RIXIEX;
+	}
+
+#ifndef CONFIG_MIPS_CPS
+	if (cpu_has_mips_r2_r6) {
+		c->core = get_ebase_cpunum();
+		if (cpu_has_mipsmt)
+			c->core >>= fls(core_nvpes()) - 1;
+	}
+#endif
+}
+
+#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
+		| MIPS_CPU_COUNTER)
+
+static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
+{
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_R2000:
+		c->cputype = CPU_R2000;
+		__cpu_name[cpu] = "R2000";
+		c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+			     MIPS_CPU_NOFPUEX;
+		if (__cpu_has_fpu())
+			c->options |= MIPS_CPU_FPU;
+		c->tlbsize = 64;
+		break;
+	case PRID_IMP_R3000:
+		if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) {
+			if (cpu_has_confreg()) {
+				c->cputype = CPU_R3081E;
+				__cpu_name[cpu] = "R3081";
+			} else {
+				c->cputype = CPU_R3000A;
+				__cpu_name[cpu] = "R3000A";
+			}
+		} else {
+			c->cputype = CPU_R3000;
+			__cpu_name[cpu] = "R3000";
+		}
+		c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+			     MIPS_CPU_NOFPUEX;
+		if (__cpu_has_fpu())
+			c->options |= MIPS_CPU_FPU;
+		c->tlbsize = 64;
+		break;
+	case PRID_IMP_R4000:
+		if (read_c0_config() & CONF_SC) {
+			if ((c->processor_id & PRID_REV_MASK) >=
+			    PRID_REV_R4400) {
+				c->cputype = CPU_R4400PC;
+				__cpu_name[cpu] = "R4400PC";
+			} else {
+				c->cputype = CPU_R4000PC;
+				__cpu_name[cpu] = "R4000PC";
+			}
+		} else {
+			int cca = read_c0_config() & CONF_CM_CMASK;
+			int mc;
+
+			/*
+			 * SC and MC versions can't be reliably told apart,
+			 * but only the latter support coherent caching
+			 * modes so assume the firmware has set the KSEG0
+			 * coherency attribute reasonably (if uncached, we
+			 * assume SC).
+			 */
+			switch (cca) {
+			case CONF_CM_CACHABLE_CE:
+			case CONF_CM_CACHABLE_COW:
+			case CONF_CM_CACHABLE_CUW:
+				mc = 1;
+				break;
+			default:
+				mc = 0;
+				break;
+			}
+			if ((c->processor_id & PRID_REV_MASK) >=
+			    PRID_REV_R4400) {
+				c->cputype = mc ? CPU_R4400MC : CPU_R4400SC;
+				__cpu_name[cpu] = mc ? "R4400MC" : "R4400SC";
+			} else {
+				c->cputype = mc ? CPU_R4000MC : CPU_R4000SC;
+				__cpu_name[cpu] = mc ? "R4000MC" : "R4000SC";
+			}
+		}
+
+		set_isa(c, MIPS_CPU_ISA_III);
+		c->fpu_msk31 |= FPU_CSR_CONDX;
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_WATCH | MIPS_CPU_VCE |
+			     MIPS_CPU_LLSC;
+		c->tlbsize = 48;
+		break;
+	case PRID_IMP_VR41XX:
+		set_isa(c, MIPS_CPU_ISA_III);
+		c->fpu_msk31 |= FPU_CSR_CONDX;
+		c->options = R4K_OPTS;
+		c->tlbsize = 32;
+		switch (c->processor_id & 0xf0) {
+		case PRID_REV_VR4111:
+			c->cputype = CPU_VR4111;
+			__cpu_name[cpu] = "NEC VR4111";
+			break;
+		case PRID_REV_VR4121:
+			c->cputype = CPU_VR4121;
+			__cpu_name[cpu] = "NEC VR4121";
+			break;
+		case PRID_REV_VR4122:
+			if ((c->processor_id & 0xf) < 0x3) {
+				c->cputype = CPU_VR4122;
+				__cpu_name[cpu] = "NEC VR4122";
+			} else {
+				c->cputype = CPU_VR4181A;
+				__cpu_name[cpu] = "NEC VR4181A";
+			}
+			break;
+		case PRID_REV_VR4130:
+			if ((c->processor_id & 0xf) < 0x4) {
+				c->cputype = CPU_VR4131;
+				__cpu_name[cpu] = "NEC VR4131";
+			} else {
+				c->cputype = CPU_VR4133;
+				c->options |= MIPS_CPU_LLSC;
+				__cpu_name[cpu] = "NEC VR4133";
+			}
+			break;
+		default:
+			printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n");
+			c->cputype = CPU_VR41XX;
+			__cpu_name[cpu] = "NEC Vr41xx";
+			break;
+		}
+		break;
+	case PRID_IMP_R4300:
+		c->cputype = CPU_R4300;
+		__cpu_name[cpu] = "R4300";
+		set_isa(c, MIPS_CPU_ISA_III);
+		c->fpu_msk31 |= FPU_CSR_CONDX;
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_LLSC;
+		c->tlbsize = 32;
+		break;
+	case PRID_IMP_R4600:
+		c->cputype = CPU_R4600;
+		__cpu_name[cpu] = "R4600";
+		set_isa(c, MIPS_CPU_ISA_III);
+		c->fpu_msk31 |= FPU_CSR_CONDX;
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_LLSC;
+		c->tlbsize = 48;
+		break;
+	#if 0
+	case PRID_IMP_R4650:
+		/*
+		 * This processor doesn't have an MMU, so it's not
+		 * "real easy" to run Linux on it. It is left purely
+		 * for documentation.  Commented out because it shares
+		 * it's c0_prid id number with the TX3900.
+		 */
+		c->cputype = CPU_R4650;
+		__cpu_name[cpu] = "R4650";
+		set_isa(c, MIPS_CPU_ISA_III);
+		c->fpu_msk31 |= FPU_CSR_CONDX;
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
+		c->tlbsize = 48;
+		break;
+	#endif
+	case PRID_IMP_TX39:
+		c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
+
+		if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
+			c->cputype = CPU_TX3927;
+			__cpu_name[cpu] = "TX3927";
+			c->tlbsize = 64;
+		} else {
+			switch (c->processor_id & PRID_REV_MASK) {
+			case PRID_REV_TX3912:
+				c->cputype = CPU_TX3912;
+				__cpu_name[cpu] = "TX3912";
+				c->tlbsize = 32;
+				break;
+			case PRID_REV_TX3922:
+				c->cputype = CPU_TX3922;
+				__cpu_name[cpu] = "TX3922";
+				c->tlbsize = 64;
+				break;
+			}
+		}
+		break;
+	case PRID_IMP_R4700:
+		c->cputype = CPU_R4700;
+		__cpu_name[cpu] = "R4700";
+		set_isa(c, MIPS_CPU_ISA_III);
+		c->fpu_msk31 |= FPU_CSR_CONDX;
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_LLSC;
+		c->tlbsize = 48;
+		break;
+	case PRID_IMP_TX49:
+		c->cputype = CPU_TX49XX;
+		__cpu_name[cpu] = "R49XX";
+		set_isa(c, MIPS_CPU_ISA_III);
+		c->fpu_msk31 |= FPU_CSR_CONDX;
+		c->options = R4K_OPTS | MIPS_CPU_LLSC;
+		if (!(c->processor_id & 0x08))
+			c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
+		c->tlbsize = 48;
+		break;
+	case PRID_IMP_R5000:
+		c->cputype = CPU_R5000;
+		__cpu_name[cpu] = "R5000";
+		set_isa(c, MIPS_CPU_ISA_IV);
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_LLSC;
+		c->tlbsize = 48;
+		break;
+	case PRID_IMP_R5432:
+		c->cputype = CPU_R5432;
+		__cpu_name[cpu] = "R5432";
+		set_isa(c, MIPS_CPU_ISA_IV);
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_WATCH | MIPS_CPU_LLSC;
+		c->tlbsize = 48;
+		break;
+	case PRID_IMP_R5500:
+		c->cputype = CPU_R5500;
+		__cpu_name[cpu] = "R5500";
+		set_isa(c, MIPS_CPU_ISA_IV);
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_WATCH | MIPS_CPU_LLSC;
+		c->tlbsize = 48;
+		break;
+	case PRID_IMP_NEVADA:
+		c->cputype = CPU_NEVADA;
+		__cpu_name[cpu] = "Nevada";
+		set_isa(c, MIPS_CPU_ISA_IV);
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
+		c->tlbsize = 48;
+		break;
+	case PRID_IMP_R6000:
+		c->cputype = CPU_R6000;
+		__cpu_name[cpu] = "R6000";
+		set_isa(c, MIPS_CPU_ISA_II);
+		c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
+			     MIPS_CPU_LLSC;
+		c->tlbsize = 32;
+		break;
+	case PRID_IMP_R6000A:
+		c->cputype = CPU_R6000A;
+		__cpu_name[cpu] = "R6000A";
+		set_isa(c, MIPS_CPU_ISA_II);
+		c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
+			     MIPS_CPU_LLSC;
+		c->tlbsize = 32;
+		break;
+	case PRID_IMP_RM7000:
+		c->cputype = CPU_RM7000;
+		__cpu_name[cpu] = "RM7000";
+		set_isa(c, MIPS_CPU_ISA_IV);
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_LLSC;
+		/*
+		 * Undocumented RM7000:	 Bit 29 in the info register of
+		 * the RM7000 v2.0 indicates if the TLB has 48 or 64
+		 * entries.
+		 *
+		 * 29	   1 =>	   64 entry JTLB
+		 *	   0 =>	   48 entry JTLB
+		 */
+		c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48;
+		break;
+	case PRID_IMP_R8000:
+		c->cputype = CPU_R8000;
+		__cpu_name[cpu] = "RM8000";
+		set_isa(c, MIPS_CPU_ISA_IV);
+		c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
+			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_LLSC;
+		c->tlbsize = 384;      /* has weird TLB: 3-way x 128 */
+		break;
+	case PRID_IMP_R10000:
+		c->cputype = CPU_R10000;
+		__cpu_name[cpu] = "R10000";
+		set_isa(c, MIPS_CPU_ISA_IV);
+		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
+			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
+			     MIPS_CPU_LLSC;
+		c->tlbsize = 64;
+		break;
+	case PRID_IMP_R12000:
+		c->cputype = CPU_R12000;
+		__cpu_name[cpu] = "R12000";
+		set_isa(c, MIPS_CPU_ISA_IV);
+		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
+			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
+			     MIPS_CPU_LLSC;
+		c->tlbsize = 64;
+		break;
+	case PRID_IMP_R14000:
+		if (((c->processor_id >> 4) & 0x0f) > 2) {
+			c->cputype = CPU_R16000;
+			__cpu_name[cpu] = "R16000";
+		} else {
+			c->cputype = CPU_R14000;
+			__cpu_name[cpu] = "R14000";
+		}
+		set_isa(c, MIPS_CPU_ISA_IV);
+		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
+			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
+			     MIPS_CPU_LLSC;
+		c->tlbsize = 64;
+		break;
+	case PRID_IMP_LOONGSON_64:  /* Loongson-2/3 */
+		switch (c->processor_id & PRID_REV_MASK) {
+		case PRID_REV_LOONGSON2E:
+			c->cputype = CPU_LOONGSON2;
+			__cpu_name[cpu] = "ICT Loongson-2";
+			set_elf_platform(cpu, "loongson2e");
+			set_isa(c, MIPS_CPU_ISA_III);
+			c->fpu_msk31 |= FPU_CSR_CONDX;
+			break;
+		case PRID_REV_LOONGSON2F:
+			c->cputype = CPU_LOONGSON2;
+			__cpu_name[cpu] = "ICT Loongson-2";
+			set_elf_platform(cpu, "loongson2f");
+			set_isa(c, MIPS_CPU_ISA_III);
+			c->fpu_msk31 |= FPU_CSR_CONDX;
+			break;
+		case PRID_REV_LOONGSON3A:
+			c->cputype = CPU_LOONGSON3;
+			__cpu_name[cpu] = "ICT Loongson-3";
+			set_elf_platform(cpu, "loongson3a");
+			set_isa(c, MIPS_CPU_ISA_M64R1);
+			break;
+		case PRID_REV_LOONGSON3B_R1:
+		case PRID_REV_LOONGSON3B_R2:
+			c->cputype = CPU_LOONGSON3;
+			__cpu_name[cpu] = "ICT Loongson-3";
+			set_elf_platform(cpu, "loongson3b");
+			set_isa(c, MIPS_CPU_ISA_M64R1);
+			break;
+		}
+
+		c->options = R4K_OPTS |
+			     MIPS_CPU_FPU | MIPS_CPU_LLSC |
+			     MIPS_CPU_32FPR;
+		c->tlbsize = 64;
+		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
+		break;
+	case PRID_IMP_LOONGSON_32:  /* Loongson-1 */
+		decode_configs(c);
+
+		c->cputype = CPU_LOONGSON1;
+
+		switch (c->processor_id & PRID_REV_MASK) {
+		case PRID_REV_LOONGSON1B:
+			__cpu_name[cpu] = "Loongson 1B";
+			break;
+		}
+
+		break;
+	}
+}
+
+static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
+{
+	c->writecombine = _CACHE_UNCACHED_ACCELERATED;
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_QEMU_GENERIC:
+		c->writecombine = _CACHE_UNCACHED;
+		c->cputype = CPU_QEMU_GENERIC;
+		__cpu_name[cpu] = "MIPS GENERIC QEMU";
+		break;
+	case PRID_IMP_4KC:
+		c->cputype = CPU_4KC;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 4Kc";
+		break;
+	case PRID_IMP_4KEC:
+	case PRID_IMP_4KECR2:
+		c->cputype = CPU_4KEC;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 4KEc";
+		break;
+	case PRID_IMP_4KSC:
+	case PRID_IMP_4KSD:
+		c->cputype = CPU_4KSC;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 4KSc";
+		break;
+	case PRID_IMP_5KC:
+		c->cputype = CPU_5KC;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 5Kc";
+		break;
+	case PRID_IMP_5KE:
+		c->cputype = CPU_5KE;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 5KE";
+		break;
+	case PRID_IMP_20KC:
+		c->cputype = CPU_20KC;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 20Kc";
+		break;
+	case PRID_IMP_24K:
+		c->cputype = CPU_24K;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 24Kc";
+		break;
+	case PRID_IMP_24KE:
+		c->cputype = CPU_24K;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 24KEc";
+		break;
+	case PRID_IMP_25KF:
+		c->cputype = CPU_25KF;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 25Kc";
+		break;
+	case PRID_IMP_34K:
+		c->cputype = CPU_34K;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 34Kc";
+		break;
+	case PRID_IMP_74K:
+		c->cputype = CPU_74K;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 74Kc";
+		break;
+	case PRID_IMP_M14KC:
+		c->cputype = CPU_M14KC;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS M14Kc";
+		break;
+	case PRID_IMP_M14KEC:
+		c->cputype = CPU_M14KEC;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS M14KEc";
+		break;
+	case PRID_IMP_1004K:
+		c->cputype = CPU_1004K;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 1004Kc";
+		break;
+	case PRID_IMP_1074K:
+		c->cputype = CPU_1074K;
+		c->writecombine = _CACHE_UNCACHED;
+		__cpu_name[cpu] = "MIPS 1074Kc";
+		break;
+	case PRID_IMP_INTERAPTIV_UP:
+		c->cputype = CPU_INTERAPTIV;
+		__cpu_name[cpu] = "MIPS interAptiv";
+		break;
+	case PRID_IMP_INTERAPTIV_MP:
+		c->cputype = CPU_INTERAPTIV;
+		__cpu_name[cpu] = "MIPS interAptiv (multi)";
+		break;
+	case PRID_IMP_PROAPTIV_UP:
+		c->cputype = CPU_PROAPTIV;
+		__cpu_name[cpu] = "MIPS proAptiv";
+		break;
+	case PRID_IMP_PROAPTIV_MP:
+		c->cputype = CPU_PROAPTIV;
+		__cpu_name[cpu] = "MIPS proAptiv (multi)";
+		break;
+	case PRID_IMP_P5600:
+		c->cputype = CPU_P5600;
+		__cpu_name[cpu] = "MIPS P5600";
+		break;
+	case PRID_IMP_M5150:
+		c->cputype = CPU_M5150;
+		__cpu_name[cpu] = "MIPS M5150";
+		break;
+	}
+
+	decode_configs(c);
+
+	spram_config();
+}
+
+static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
+{
+	decode_configs(c);
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_AU1_REV1:
+	case PRID_IMP_AU1_REV2:
+		c->cputype = CPU_ALCHEMY;
+		switch ((c->processor_id >> 24) & 0xff) {
+		case 0:
+			__cpu_name[cpu] = "Au1000";
+			break;
+		case 1:
+			__cpu_name[cpu] = "Au1500";
+			break;
+		case 2:
+			__cpu_name[cpu] = "Au1100";
+			break;
+		case 3:
+			__cpu_name[cpu] = "Au1550";
+			break;
+		case 4:
+			__cpu_name[cpu] = "Au1200";
+			if ((c->processor_id & PRID_REV_MASK) == 2)
+				__cpu_name[cpu] = "Au1250";
+			break;
+		case 5:
+			__cpu_name[cpu] = "Au1210";
+			break;
+		default:
+			__cpu_name[cpu] = "Au1xxx";
+			break;
+		}
+		break;
+	}
+}
+
+static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
+{
+	decode_configs(c);
+
+	c->writecombine = _CACHE_UNCACHED_ACCELERATED;
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_SB1:
+		c->cputype = CPU_SB1;
+		__cpu_name[cpu] = "SiByte SB1";
+		/* FPU in pass1 is known to have issues. */
+		if ((c->processor_id & PRID_REV_MASK) < 0x02)
+			c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
+		break;
+	case PRID_IMP_SB1A:
+		c->cputype = CPU_SB1A;
+		__cpu_name[cpu] = "SiByte SB1A";
+		break;
+	}
+}
+
+static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
+{
+	decode_configs(c);
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_SR71000:
+		c->cputype = CPU_SR71000;
+		__cpu_name[cpu] = "Sandcraft SR71000";
+		c->scache.ways = 8;
+		c->tlbsize = 64;
+		break;
+	}
+}
+
+static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
+{
+	decode_configs(c);
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_PR4450:
+		c->cputype = CPU_PR4450;
+		__cpu_name[cpu] = "Philips PR4450";
+		set_isa(c, MIPS_CPU_ISA_M32R1);
+		break;
+	}
+}
+
+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
+{
+	decode_configs(c);
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_BMIPS32_REV4:
+	case PRID_IMP_BMIPS32_REV8:
+		c->cputype = CPU_BMIPS32;
+		__cpu_name[cpu] = "Broadcom BMIPS32";
+		set_elf_platform(cpu, "bmips32");
+		break;
+	case PRID_IMP_BMIPS3300:
+	case PRID_IMP_BMIPS3300_ALT:
+	case PRID_IMP_BMIPS3300_BUG:
+		c->cputype = CPU_BMIPS3300;
+		__cpu_name[cpu] = "Broadcom BMIPS3300";
+		set_elf_platform(cpu, "bmips3300");
+		break;
+	case PRID_IMP_BMIPS43XX: {
+		int rev = c->processor_id & PRID_REV_MASK;
+
+		if (rev >= PRID_REV_BMIPS4380_LO &&
+				rev <= PRID_REV_BMIPS4380_HI) {
+			c->cputype = CPU_BMIPS4380;
+			__cpu_name[cpu] = "Broadcom BMIPS4380";
+			set_elf_platform(cpu, "bmips4380");
+		} else {
+			c->cputype = CPU_BMIPS4350;
+			__cpu_name[cpu] = "Broadcom BMIPS4350";
+			set_elf_platform(cpu, "bmips4350");
+		}
+		break;
+	}
+	case PRID_IMP_BMIPS5000:
+	case PRID_IMP_BMIPS5200:
+		c->cputype = CPU_BMIPS5000;
+		__cpu_name[cpu] = "Broadcom BMIPS5000";
+		set_elf_platform(cpu, "bmips5000");
+		c->options |= MIPS_CPU_ULRI;
+		break;
+	}
+}
+
+static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
+{
+	decode_configs(c);
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_CAVIUM_CN38XX:
+	case PRID_IMP_CAVIUM_CN31XX:
+	case PRID_IMP_CAVIUM_CN30XX:
+		c->cputype = CPU_CAVIUM_OCTEON;
+		__cpu_name[cpu] = "Cavium Octeon";
+		goto platform;
+	case PRID_IMP_CAVIUM_CN58XX:
+	case PRID_IMP_CAVIUM_CN56XX:
+	case PRID_IMP_CAVIUM_CN50XX:
+	case PRID_IMP_CAVIUM_CN52XX:
+		c->cputype = CPU_CAVIUM_OCTEON_PLUS;
+		__cpu_name[cpu] = "Cavium Octeon+";
+platform:
+		set_elf_platform(cpu, "octeon");
+		break;
+	case PRID_IMP_CAVIUM_CN61XX:
+	case PRID_IMP_CAVIUM_CN63XX:
+	case PRID_IMP_CAVIUM_CN66XX:
+	case PRID_IMP_CAVIUM_CN68XX:
+	case PRID_IMP_CAVIUM_CNF71XX:
+		c->cputype = CPU_CAVIUM_OCTEON2;
+		__cpu_name[cpu] = "Cavium Octeon II";
+		set_elf_platform(cpu, "octeon2");
+		break;
+	case PRID_IMP_CAVIUM_CN70XX:
+	case PRID_IMP_CAVIUM_CN78XX:
+		c->cputype = CPU_CAVIUM_OCTEON3;
+		__cpu_name[cpu] = "Cavium Octeon III";
+		set_elf_platform(cpu, "octeon3");
+		break;
+	default:
+		printk(KERN_INFO "Unknown Octeon chip!\n");
+		c->cputype = CPU_UNKNOWN;
+		break;
+	}
+}
+
+static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
+{
+	decode_configs(c);
+	/* JZRISC does not implement the CP0 counter. */
+	c->options &= ~MIPS_CPU_COUNTER;
+	BUG_ON(!__builtin_constant_p(cpu_has_counter) || cpu_has_counter);
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_JZRISC:
+		c->cputype = CPU_JZRISC;
+		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
+		__cpu_name[cpu] = "Ingenic JZRISC";
+		break;
+	default:
+		panic("Unknown Ingenic Processor ID!");
+		break;
+	}
+}
+
+static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
+{
+	decode_configs(c);
+
+	if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_NETLOGIC_AU13XX) {
+		c->cputype = CPU_ALCHEMY;
+		__cpu_name[cpu] = "Au1300";
+		/* following stuff is not for Alchemy */
+		return;
+	}
+
+	c->options = (MIPS_CPU_TLB	 |
+			MIPS_CPU_4KEX	 |
+			MIPS_CPU_COUNTER |
+			MIPS_CPU_DIVEC	 |
+			MIPS_CPU_WATCH	 |
+			MIPS_CPU_EJTAG	 |
+			MIPS_CPU_LLSC);
+
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_NETLOGIC_XLP2XX:
+	case PRID_IMP_NETLOGIC_XLP9XX:
+	case PRID_IMP_NETLOGIC_XLP5XX:
+		c->cputype = CPU_XLP;
+		__cpu_name[cpu] = "Broadcom XLPII";
+		break;
+
+	case PRID_IMP_NETLOGIC_XLP8XX:
+	case PRID_IMP_NETLOGIC_XLP3XX:
+		c->cputype = CPU_XLP;
+		__cpu_name[cpu] = "Netlogic XLP";
+		break;
+
+	case PRID_IMP_NETLOGIC_XLR732:
+	case PRID_IMP_NETLOGIC_XLR716:
+	case PRID_IMP_NETLOGIC_XLR532:
+	case PRID_IMP_NETLOGIC_XLR308:
+	case PRID_IMP_NETLOGIC_XLR532C:
+	case PRID_IMP_NETLOGIC_XLR516C:
+	case PRID_IMP_NETLOGIC_XLR508C:
+	case PRID_IMP_NETLOGIC_XLR308C:
+		c->cputype = CPU_XLR;
+		__cpu_name[cpu] = "Netlogic XLR";
+		break;
+
+	case PRID_IMP_NETLOGIC_XLS608:
+	case PRID_IMP_NETLOGIC_XLS408:
+	case PRID_IMP_NETLOGIC_XLS404:
+	case PRID_IMP_NETLOGIC_XLS208:
+	case PRID_IMP_NETLOGIC_XLS204:
+	case PRID_IMP_NETLOGIC_XLS108:
+	case PRID_IMP_NETLOGIC_XLS104:
+	case PRID_IMP_NETLOGIC_XLS616B:
+	case PRID_IMP_NETLOGIC_XLS608B:
+	case PRID_IMP_NETLOGIC_XLS416B:
+	case PRID_IMP_NETLOGIC_XLS412B:
+	case PRID_IMP_NETLOGIC_XLS408B:
+	case PRID_IMP_NETLOGIC_XLS404B:
+		c->cputype = CPU_XLR;
+		__cpu_name[cpu] = "Netlogic XLS";
+		break;
+
+	default:
+		pr_info("Unknown Netlogic chip id [%02x]!\n",
+		       c->processor_id);
+		c->cputype = CPU_XLR;
+		break;
+	}
+
+	if (c->cputype == CPU_XLP) {
+		set_isa(c, MIPS_CPU_ISA_M64R2);
+		c->options |= (MIPS_CPU_FPU | MIPS_CPU_ULRI | MIPS_CPU_MCHECK);
+		/* This will be updated again after all threads are woken up */
+		c->tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+	} else {
+		set_isa(c, MIPS_CPU_ISA_M64R1);
+		c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1;
+	}
+	c->kscratch_mask = 0xf;
+}
+
+#ifdef CONFIG_64BIT
+/* For use by uaccess.h */
+u64 __ua_limit;
+EXPORT_SYMBOL(__ua_limit);
+#endif
+
+const char *__cpu_name[NR_CPUS];
+const char *__elf_platform;
+
+void cpu_probe(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+	unsigned int cpu = smp_processor_id();
+
+	c->processor_id = PRID_IMP_UNKNOWN;
+	c->fpu_id	= FPIR_IMP_NONE;
+	c->cputype	= CPU_UNKNOWN;
+	c->writecombine = _CACHE_UNCACHED;
+
+	c->fpu_csr31	= FPU_CSR_RN;
+	c->fpu_msk31	= FPU_CSR_RSVD | FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+
+	c->processor_id = read_c0_prid();
+	switch (c->processor_id & PRID_COMP_MASK) {
+	case PRID_COMP_LEGACY:
+		cpu_probe_legacy(c, cpu);
+		break;
+	case PRID_COMP_MIPS:
+		cpu_probe_mips(c, cpu);
+		break;
+	case PRID_COMP_ALCHEMY:
+		cpu_probe_alchemy(c, cpu);
+		break;
+	case PRID_COMP_SIBYTE:
+		cpu_probe_sibyte(c, cpu);
+		break;
+	case PRID_COMP_BROADCOM:
+		cpu_probe_broadcom(c, cpu);
+		break;
+	case PRID_COMP_SANDCRAFT:
+		cpu_probe_sandcraft(c, cpu);
+		break;
+	case PRID_COMP_NXP:
+		cpu_probe_nxp(c, cpu);
+		break;
+	case PRID_COMP_CAVIUM:
+		cpu_probe_cavium(c, cpu);
+		break;
+	case PRID_COMP_INGENIC:
+		cpu_probe_ingenic(c, cpu);
+		break;
+	case PRID_COMP_NETLOGIC:
+		cpu_probe_netlogic(c, cpu);
+		break;
+	}
+
+	BUG_ON(!__cpu_name[cpu]);
+	BUG_ON(c->cputype == CPU_UNKNOWN);
+
+	/*
+	 * Platform code can force the cpu type to optimize code
+	 * generation. In that case be sure the cpu type is correctly
+	 * manually setup otherwise it could trigger some nasty bugs.
+	 */
+	BUG_ON(current_cpu_type() != c->cputype);
+
+	if (mips_fpu_disabled)
+		c->options &= ~MIPS_CPU_FPU;
+
+	if (mips_dsp_disabled)
+		c->ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P);
+
+	if (mips_htw_disabled) {
+		c->options &= ~MIPS_CPU_HTW;
+		write_c0_pwctl(read_c0_pwctl() &
+			       ~(1 << MIPS_PWCTL_PWEN_SHIFT));
+	}
+
+	if (c->options & MIPS_CPU_FPU)
+		cpu_set_fpu_opts(c);
+	else
+		cpu_set_nofpu_opts(c);
+
+	if (cpu_has_mips_r2_r6) {
+		c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
+		/* R2 has Performance Counter Interrupt indicator */
+		c->options |= MIPS_CPU_PCI;
+	}
+	else
+		c->srsets = 1;
+
+	if (cpu_has_msa) {
+		c->msa_id = cpu_get_msa_id();
+		WARN(c->msa_id & MSA_IR_WRPF,
+		     "Vector register partitioning unimplemented!");
+	}
+
+	cpu_probe_vmbits(c);
+
+#ifdef CONFIG_64BIT
+	if (cpu == 0)
+		__ua_limit = ~((1ull << cpu_vmbits) - 1);
+#endif
+}
+
+void cpu_report(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	pr_info("CPU%d revision is: %08x (%s)\n",
+		smp_processor_id(), c->processor_id, cpu_name_string());
+	if (c->options & MIPS_CPU_FPU)
+		printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
+	if (cpu_has_msa)
+		pr_info("MSA revision is: %08x\n", c->msa_id);
+}
diff --git a/arch/mips/kernel/crash.c b/arch/mips/kernel/crash.c
new file mode 100644
index 000000000..d434d5d5a
--- /dev/null
+++ b/arch/mips/kernel/crash.c
@@ -0,0 +1,70 @@
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/reboot.h>
+#include <linux/kexec.h>
+#include <linux/bootmem.h>
+#include <linux/crash_dump.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+
+/* This keeps a track of which one is crashing cpu. */
+static int crashing_cpu = -1;
+static cpumask_t cpus_in_crash = CPU_MASK_NONE;
+
+#ifdef CONFIG_SMP
+static void crash_shutdown_secondary(void *ignore)
+{
+	struct pt_regs *regs;
+	int cpu = smp_processor_id();
+
+	regs = task_pt_regs(current);
+
+	if (!cpu_online(cpu))
+		return;
+
+	local_irq_disable();
+	if (!cpumask_test_cpu(cpu, &cpus_in_crash))
+		crash_save_cpu(regs, cpu);
+	cpumask_set_cpu(cpu, &cpus_in_crash);
+
+	while (!atomic_read(&kexec_ready_to_reboot))
+		cpu_relax();
+	relocated_kexec_smp_wait(NULL);
+	/* NOTREACHED */
+}
+
+static void crash_kexec_prepare_cpus(void)
+{
+	unsigned int msecs;
+
+	unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
+
+	dump_send_ipi(crash_shutdown_secondary);
+	smp_wmb();
+
+	/*
+	 * The crash CPU sends an IPI and wait for other CPUs to
+	 * respond. Delay of at least 10 seconds.
+	 */
+	pr_emerg("Sending IPI to other cpus...\n");
+	msecs = 10000;
+	while ((cpumask_weight(&cpus_in_crash) < ncpus) && (--msecs > 0)) {
+		cpu_relax();
+		mdelay(1);
+	}
+}
+
+#else /* !defined(CONFIG_SMP)  */
+static void crash_kexec_prepare_cpus(void) {}
+#endif /* !defined(CONFIG_SMP)	*/
+
+void default_machine_crash_shutdown(struct pt_regs *regs)
+{
+	local_irq_disable();
+	crashing_cpu = smp_processor_id();
+	crash_save_cpu(regs, crashing_cpu);
+	crash_kexec_prepare_cpus();
+	cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
+}
diff --git a/arch/mips/kernel/crash_dump.c b/arch/mips/kernel/crash_dump.c
new file mode 100644
index 000000000..6fe7790e5
--- /dev/null
+++ b/arch/mips/kernel/crash_dump.c
@@ -0,0 +1,66 @@
+#include <linux/highmem.h>
+#include <linux/bootmem.h>
+#include <linux/crash_dump.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+
+static void *kdump_buf_page;
+
+/**
+ * copy_oldmem_page - copy one page from "oldmem"
+ * @pfn: page frame number to be copied
+ * @buf: target memory address for the copy; this can be in kernel address
+ *	space or user address space (see @userbuf)
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page (based on pfn) to begin the copy
+ * @userbuf: if set, @buf is in user address space, use copy_to_user(),
+ *	otherwise @buf is in kernel address space, use memcpy().
+ *
+ * Copy a page from "oldmem". For this page, there is no pte mapped
+ * in the current kernel.
+ *
+ * Calling copy_to_user() in atomic context is not desirable. Hence first
+ * copying the data to a pre-allocated kernel page and then copying to user
+ * space in non-atomic context.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+			 size_t csize, unsigned long offset, int userbuf)
+{
+	void  *vaddr;
+
+	if (!csize)
+		return 0;
+
+	vaddr = kmap_atomic_pfn(pfn);
+
+	if (!userbuf) {
+		memcpy(buf, (vaddr + offset), csize);
+		kunmap_atomic(vaddr);
+	} else {
+		if (!kdump_buf_page) {
+			pr_warn("Kdump: Kdump buffer page not allocated\n");
+
+			return -EFAULT;
+		}
+		copy_page(kdump_buf_page, vaddr);
+		kunmap_atomic(vaddr);
+		if (copy_to_user(buf, (kdump_buf_page + offset), csize))
+			return -EFAULT;
+	}
+
+	return csize;
+}
+
+static int __init kdump_buf_page_init(void)
+{
+	int ret = 0;
+
+	kdump_buf_page = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!kdump_buf_page) {
+		pr_warn("Kdump: Failed to allocate kdump buffer page\n");
+		ret = -ENOMEM;
+	}
+
+	return ret;
+}
+arch_initcall(kdump_buf_page_init);
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
new file mode 100644
index 000000000..7f65b53d1
--- /dev/null
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+static cycle_t bcm1480_hpt_read(struct clocksource *cs)
+{
+	return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
+}
+
+struct clocksource bcm1480_clocksource = {
+	.name	= "zbbus-cycles",
+	.rating = 200,
+	.read	= bcm1480_hpt_read,
+	.mask	= CLOCKSOURCE_MASK(64),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static u64 notrace sb1480_read_sched_clock(void)
+{
+	return __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
+}
+
+void __init sb1480_clocksource_init(void)
+{
+	struct clocksource *cs = &bcm1480_clocksource;
+	unsigned int plldiv;
+	unsigned long zbbus;
+
+	plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+	zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
+	clocksource_register_hz(cs, zbbus);
+
+	sched_clock_register(sb1480_read_sched_clock, 64, zbbus);
+}
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
new file mode 100644
index 000000000..722f5589c
--- /dev/null
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -0,0 +1,74 @@
+/*
+ *  DEC I/O ASIC's counter clocksource
+ *
+ *  Copyright (C) 2008	Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+#include <linux/init.h>
+
+#include <asm/ds1287.h>
+#include <asm/time.h>
+#include <asm/dec/ioasic.h>
+#include <asm/dec/ioasic_addrs.h>
+
+static cycle_t dec_ioasic_hpt_read(struct clocksource *cs)
+{
+	return ioasic_read(IO_REG_FCTR);
+}
+
+static struct clocksource clocksource_dec = {
+	.name		= "dec-ioasic",
+	.read		= dec_ioasic_hpt_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static u64 notrace dec_ioasic_read_sched_clock(void)
+{
+	return ioasic_read(IO_REG_FCTR);
+}
+
+int __init dec_ioasic_clocksource_init(void)
+{
+	unsigned int freq;
+	u32 start, end;
+	int i = HZ / 8;
+
+	ds1287_timer_state();
+	while (!ds1287_timer_state())
+		;
+
+	start = dec_ioasic_hpt_read(&clocksource_dec);
+
+	while (i--)
+		while (!ds1287_timer_state())
+			;
+
+	end = dec_ioasic_hpt_read(&clocksource_dec);
+
+	freq = (end - start) * 8;
+
+	/* An early revision of the I/O ASIC didn't have the counter.  */
+	if (!freq)
+		return -ENXIO;
+
+	printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
+
+	clocksource_dec.rating = 200 + freq / 10000000;
+	clocksource_register_hz(&clocksource_dec, freq);
+
+	sched_clock_register(dec_ioasic_read_sched_clock, 32, freq);
+
+	return 0;
+}
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
new file mode 100644
index 000000000..e5ed7ada1
--- /dev/null
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/sched_clock.h>
+
+#include <asm/time.h>
+
+static cycle_t c0_hpt_read(struct clocksource *cs)
+{
+	return read_c0_count();
+}
+
+static struct clocksource clocksource_mips = {
+	.name		= "MIPS",
+	.read		= c0_hpt_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static u64 notrace r4k_read_sched_clock(void)
+{
+	return read_c0_count();
+}
+
+int __init init_r4k_clocksource(void)
+{
+	if (!cpu_has_counter || !mips_hpt_frequency)
+		return -ENXIO;
+
+	/* Calculate a somewhat reasonable rating value */
+	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
+
+	clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
+
+	sched_clock_register(r4k_read_sched_clock, 32, mips_hpt_frequency);
+
+	return 0;
+}
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
new file mode 100644
index 000000000..d915652b4
--- /dev/null
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+#define SB1250_HPT_NUM		3
+#define SB1250_HPT_VALUE	M_SCD_TIMER_CNT /* max value */
+
+/*
+ * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
+ * again.
+ */
+static inline cycle_t sb1250_hpt_get_cycles(void)
+{
+	unsigned int count;
+	void __iomem *addr;
+
+	addr = IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT));
+	count = G_SCD_TIMER_CNT(__raw_readq(addr));
+
+	return SB1250_HPT_VALUE - count;
+}
+
+static cycle_t sb1250_hpt_read(struct clocksource *cs)
+{
+	return sb1250_hpt_get_cycles();
+}
+
+struct clocksource bcm1250_clocksource = {
+	.name	= "bcm1250-counter-3",
+	.rating = 200,
+	.read	= sb1250_hpt_read,
+	.mask	= CLOCKSOURCE_MASK(23),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static u64 notrace sb1250_read_sched_clock(void)
+{
+	return sb1250_hpt_get_cycles();
+}
+
+void __init sb1250_clocksource_init(void)
+{
+	struct clocksource *cs = &bcm1250_clocksource;
+
+	/* Setup hpt using timer #3 but do not enable irq for it */
+	__raw_writeq(0,
+		     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+						 R_SCD_TIMER_CFG)));
+	__raw_writeq(SB1250_HPT_VALUE,
+		     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+						 R_SCD_TIMER_INIT)));
+	__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+		     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+						 R_SCD_TIMER_CFG)));
+
+	clocksource_register_hz(cs, V_SCD_TIMER_FREQ);
+
+	sched_clock_register(sb1250_read_sched_clock, 23, V_SCD_TIMER_FREQ);
+}
diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c
new file mode 100644
index 000000000..505cb77d1
--- /dev/null
+++ b/arch/mips/kernel/early_printk.c
@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2003, 06, 07 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ *   written by Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/printk.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+
+extern void prom_putchar(char);
+
+static void early_console_write(struct console *con, const char *s, unsigned n)
+{
+	while (n-- && *s) {
+		if (*s == '\n')
+			prom_putchar('\r');
+		prom_putchar(*s);
+		s++;
+	}
+}
+
+static struct console early_console_prom = {
+	.name	= "early",
+	.write	= early_console_write,
+	.flags	= CON_PRINTBUFFER | CON_BOOT,
+	.index	= -1
+};
+
+void __init setup_early_printk(void)
+{
+	if (early_console)
+		return;
+	early_console = &early_console_prom;
+
+	register_console(&early_console_prom);
+}
diff --git a/arch/mips/kernel/early_printk_8250.c b/arch/mips/kernel/early_printk_8250.c
new file mode 100644
index 000000000..83cea3767
--- /dev/null
+++ b/arch/mips/kernel/early_printk_8250.c
@@ -0,0 +1,66 @@
+/*
+ *  8250/16550-type serial ports prom_putchar()
+ *
+ *  Copyright (C) 2010  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+static void __iomem *serial8250_base;
+static unsigned int serial8250_reg_shift;
+static unsigned int serial8250_tx_timeout;
+
+void setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift,
+				  unsigned int timeout)
+{
+	serial8250_base = (void __iomem *)base;
+	serial8250_reg_shift = reg_shift;
+	serial8250_tx_timeout = timeout;
+}
+
+static inline u8 serial_in(int offset)
+{
+	return readb(serial8250_base + (offset << serial8250_reg_shift));
+}
+
+static inline void serial_out(int offset, char value)
+{
+	writeb(value, serial8250_base + (offset << serial8250_reg_shift));
+}
+
+void prom_putchar(char c)
+{
+	unsigned int timeout;
+	int status, bits;
+
+	if (!serial8250_base)
+		return;
+
+	timeout = serial8250_tx_timeout;
+	bits = UART_LSR_TEMT | UART_LSR_THRE;
+
+	do {
+		status = serial_in(UART_LSR);
+
+		if (--timeout == 0)
+			break;
+	} while ((status & bits) != bits);
+
+	if (timeout)
+		serial_out(UART_TX, c);
+}
diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c
new file mode 100644
index 000000000..4a4d9e067
--- /dev/null
+++ b/arch/mips/kernel/elf.c
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2014 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/elf.h>
+#include <linux/sched.h>
+
+/* FPU modes */
+enum {
+	FP_FRE,
+	FP_FR0,
+	FP_FR1,
+};
+
+/**
+ * struct mode_req - ABI FPU mode requirements
+ * @single:	The program being loaded needs an FPU but it will only issue
+ *		single precision instructions meaning that it can execute in
+ *		either FR0 or FR1.
+ * @soft:	The soft(-float) requirement means that the program being
+ *		loaded needs has no FPU dependency at all (i.e. it has no
+ *		FPU instructions).
+ * @fr1:	The program being loaded depends on FPU being in FR=1 mode.
+ * @frdefault:	The program being loaded depends on the default FPU mode.
+ *		That is FR0 for O32 and FR1 for N32/N64.
+ * @fre:	The program being loaded depends on FPU with FRE=1. This mode is
+ *		a bridge which uses FR=1 whilst still being able to maintain
+ *		full compatibility with pre-existing code using the O32 FP32
+ *		ABI.
+ *
+ * More information about the FP ABIs can be found here:
+ *
+ * https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking#10.4.1._Basic_mode_set-up
+ *
+ */
+
+struct mode_req {
+	bool single;
+	bool soft;
+	bool fr1;
+	bool frdefault;
+	bool fre;
+};
+
+static const struct mode_req fpu_reqs[] = {
+	[MIPS_ABI_FP_ANY]    = { true,  true,  true,  true,  true  },
+	[MIPS_ABI_FP_DOUBLE] = { false, false, false, true,  true  },
+	[MIPS_ABI_FP_SINGLE] = { true,  false, false, false, false },
+	[MIPS_ABI_FP_SOFT]   = { false, true,  false, false, false },
+	[MIPS_ABI_FP_OLD_64] = { false, false, false, false, false },
+	[MIPS_ABI_FP_XX]     = { false, false, true,  true,  true  },
+	[MIPS_ABI_FP_64]     = { false, false, true,  false, false },
+	[MIPS_ABI_FP_64A]    = { false, false, true,  false, true  }
+};
+
+/*
+ * Mode requirements when .MIPS.abiflags is not present in the ELF.
+ * Not present means that everything is acceptable except FR1.
+ */
+static struct mode_req none_req = { true, true, false, true, true };
+
+int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
+		     bool is_interp, struct arch_elf_state *state)
+{
+	struct elf32_hdr *ehdr32 = _ehdr;
+	struct elf32_phdr *phdr32 = _phdr;
+	struct elf64_phdr *phdr64 = _phdr;
+	struct mips_elf_abiflags_v0 abiflags;
+	int ret;
+
+	/* Lets see if this is an O32 ELF */
+	if (ehdr32->e_ident[EI_CLASS] == ELFCLASS32) {
+		if (ehdr32->e_flags & EF_MIPS_FP64) {
+			/*
+			 * Set MIPS_ABI_FP_OLD_64 for EF_MIPS_FP64. We will override it
+			 * later if needed
+			 */
+			if (is_interp)
+				state->interp_fp_abi = MIPS_ABI_FP_OLD_64;
+			else
+				state->fp_abi = MIPS_ABI_FP_OLD_64;
+		}
+		if (phdr32->p_type != PT_MIPS_ABIFLAGS)
+			return 0;
+
+		if (phdr32->p_filesz < sizeof(abiflags))
+			return -EINVAL;
+
+		ret = kernel_read(elf, phdr32->p_offset,
+				  (char *)&abiflags,
+				  sizeof(abiflags));
+	} else {
+		if (phdr64->p_type != PT_MIPS_ABIFLAGS)
+			return 0;
+		if (phdr64->p_filesz < sizeof(abiflags))
+			return -EINVAL;
+
+		ret = kernel_read(elf, phdr64->p_offset,
+				  (char *)&abiflags,
+				  sizeof(abiflags));
+	}
+
+	if (ret < 0)
+		return ret;
+	if (ret != sizeof(abiflags))
+		return -EIO;
+
+	/* Record the required FP ABIs for use by mips_check_elf */
+	if (is_interp)
+		state->interp_fp_abi = abiflags.fp_abi;
+	else
+		state->fp_abi = abiflags.fp_abi;
+
+	return 0;
+}
+
+int arch_check_elf(void *_ehdr, bool has_interpreter,
+		   struct arch_elf_state *state)
+{
+	struct elf32_hdr *ehdr = _ehdr;
+	struct mode_req prog_req, interp_req;
+	int fp_abi, interp_fp_abi, abi0, abi1, max_abi;
+	bool is_mips64;
+
+	if (!config_enabled(CONFIG_MIPS_O32_FP64_SUPPORT))
+		return 0;
+
+	fp_abi = state->fp_abi;
+
+	if (has_interpreter) {
+		interp_fp_abi = state->interp_fp_abi;
+
+		abi0 = min(fp_abi, interp_fp_abi);
+		abi1 = max(fp_abi, interp_fp_abi);
+	} else {
+		abi0 = abi1 = fp_abi;
+	}
+
+	is_mips64 = (ehdr->e_ident[EI_CLASS] == ELFCLASS64) ||
+		    (ehdr->e_flags & EF_MIPS_ABI2);
+
+	if (is_mips64) {
+		/* MIPS64 code always uses FR=1, thus the default is easy */
+		state->overall_fp_mode = FP_FR1;
+
+		/* Disallow access to the various FPXX & FP64 ABIs */
+		max_abi = MIPS_ABI_FP_SOFT;
+	} else {
+		/* Default to a mode capable of running code expecting FR=0 */
+		state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0;
+
+		/* Allow all ABIs we know about */
+		max_abi = MIPS_ABI_FP_64A;
+	}
+
+	if ((abi0 > max_abi && abi0 != MIPS_ABI_FP_UNKNOWN) ||
+	    (abi1 > max_abi && abi1 != MIPS_ABI_FP_UNKNOWN))
+		return -ELIBBAD;
+
+	/* It's time to determine the FPU mode requirements */
+	prog_req = (abi0 == MIPS_ABI_FP_UNKNOWN) ? none_req : fpu_reqs[abi0];
+	interp_req = (abi1 == MIPS_ABI_FP_UNKNOWN) ? none_req : fpu_reqs[abi1];
+
+	/*
+	 * Check whether the program's and interp's ABIs have a matching FPU
+	 * mode requirement.
+	 */
+	prog_req.single = interp_req.single && prog_req.single;
+	prog_req.soft = interp_req.soft && prog_req.soft;
+	prog_req.fr1 = interp_req.fr1 && prog_req.fr1;
+	prog_req.frdefault = interp_req.frdefault && prog_req.frdefault;
+	prog_req.fre = interp_req.fre && prog_req.fre;
+
+	/*
+	 * Determine the desired FPU mode
+	 *
+	 * Decision making:
+	 *
+	 * - We want FR_FRE if FRE=1 and both FR=1 and FR=0 are false. This
+	 *   means that we have a combination of program and interpreter
+	 *   that inherently require the hybrid FP mode.
+	 * - If FR1 and FRDEFAULT is true, that means we hit the any-abi or
+	 *   fpxx case. This is because, in any-ABI (or no-ABI) we have no FPU
+	 *   instructions so we don't care about the mode. We will simply use
+	 *   the one preferred by the hardware. In fpxx case, that ABI can
+	 *   handle both FR=1 and FR=0, so, again, we simply choose the one
+	 *   preferred by the hardware. Next, if we only use single-precision
+	 *   FPU instructions, and the default ABI FPU mode is not good
+	 *   (ie single + any ABI combination), we set again the FPU mode to the
+	 *   one is preferred by the hardware. Next, if we know that the code
+	 *   will only use single-precision instructions, shown by single being
+	 *   true but frdefault being false, then we again set the FPU mode to
+	 *   the one that is preferred by the hardware.
+	 * - We want FP_FR1 if that's the only matching mode and the default one
+	 *   is not good.
+	 * - Return with -ELIBADD if we can't find a matching FPU mode.
+	 */
+	if (prog_req.fre && !prog_req.frdefault && !prog_req.fr1)
+		state->overall_fp_mode = FP_FRE;
+	else if ((prog_req.fr1 && prog_req.frdefault) ||
+		 (prog_req.single && !prog_req.frdefault))
+		/* Make sure 64-bit MIPS III/IV/64R1 will not pick FR1 */
+		state->overall_fp_mode = ((current_cpu_data.fpu_id & MIPS_FPIR_F64) &&
+					  cpu_has_mips_r2_r6) ?
+					  FP_FR1 : FP_FR0;
+	else if (prog_req.fr1)
+		state->overall_fp_mode = FP_FR1;
+	else  if (!prog_req.fre && !prog_req.frdefault &&
+		  !prog_req.fr1 && !prog_req.single && !prog_req.soft)
+		return -ELIBBAD;
+
+	return 0;
+}
+
+static inline void set_thread_fp_mode(int hybrid, int regs32)
+{
+	if (hybrid)
+		set_thread_flag(TIF_HYBRID_FPREGS);
+	else
+		clear_thread_flag(TIF_HYBRID_FPREGS);
+	if (regs32)
+		set_thread_flag(TIF_32BIT_FPREGS);
+	else
+		clear_thread_flag(TIF_32BIT_FPREGS);
+}
+
+void mips_set_personality_fp(struct arch_elf_state *state)
+{
+	/*
+	 * This function is only ever called for O32 ELFs so we should
+	 * not be worried about N32/N64 binaries.
+	 */
+
+	if (!config_enabled(CONFIG_MIPS_O32_FP64_SUPPORT))
+		return;
+
+	switch (state->overall_fp_mode) {
+	case FP_FRE:
+		set_thread_fp_mode(1, 0);
+		break;
+	case FP_FR0:
+		set_thread_fp_mode(0, 1);
+		break;
+	case FP_FR1:
+		set_thread_fp_mode(0, 0);
+		break;
+	default:
+		BUG();
+	}
+}
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
new file mode 100644
index 000000000..7791840cf
--- /dev/null
+++ b/arch/mips/kernel/entry.S
@@ -0,0 +1,194 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/compiler.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+#include <asm/isadep.h>
+#include <asm/thread_info.h>
+#include <asm/war.h>
+
+#ifndef CONFIG_PREEMPT
+#define resume_kernel	restore_all
+#else
+#define __ret_from_irq	ret_from_exception
+#endif
+
+	.text
+	.align	5
+#ifndef CONFIG_PREEMPT
+FEXPORT(ret_from_exception)
+	local_irq_disable			# preempt stop
+	b	__ret_from_irq
+#endif
+FEXPORT(ret_from_irq)
+	LONG_S	s0, TI_REGS($28)
+FEXPORT(__ret_from_irq)
+/*
+ * We can be coming here from a syscall done in the kernel space,
+ * e.g. a failed kernel_execve().
+ */
+resume_userspace_check:
+	LONG_L	t0, PT_STATUS(sp)		# returning to kernel mode?
+	andi	t0, t0, KU_USER
+	beqz	t0, resume_kernel
+
+resume_userspace:
+	local_irq_disable		# make sure we dont miss an
+					# interrupt setting need_resched
+					# between sampling and return
+#ifdef CONFIG_MIPSR2_TO_R6_EMULATOR
+	lw	k0, TI_R2_EMUL_RET($28)
+	bnez	k0, restore_all_from_r2_emul
+#endif
+
+	LONG_L	a2, TI_FLAGS($28)	# current->work
+	andi	t0, a2, _TIF_WORK_MASK	# (ignoring syscall_trace)
+	bnez	t0, work_pending
+	j	restore_all
+
+#ifdef CONFIG_PREEMPT
+resume_kernel:
+	local_irq_disable
+	lw	t0, TI_PRE_COUNT($28)
+	bnez	t0, restore_all
+need_resched:
+	LONG_L	t0, TI_FLAGS($28)
+	andi	t1, t0, _TIF_NEED_RESCHED
+	beqz	t1, restore_all
+	LONG_L	t0, PT_STATUS(sp)		# Interrupts off?
+	andi	t0, 1
+	beqz	t0, restore_all
+	jal	preempt_schedule_irq
+	b	need_resched
+#endif
+
+FEXPORT(ret_from_kernel_thread)
+	jal	schedule_tail		# a0 = struct task_struct *prev
+	move	a0, s1
+	jal	s0
+	j	syscall_exit
+
+FEXPORT(ret_from_fork)
+	jal	schedule_tail		# a0 = struct task_struct *prev
+
+FEXPORT(syscall_exit)
+	local_irq_disable		# make sure need_resched and
+					# signals dont change between
+					# sampling and return
+	LONG_L	a2, TI_FLAGS($28)	# current->work
+	li	t0, _TIF_ALLWORK_MASK
+	and	t0, a2, t0
+	bnez	t0, syscall_exit_work
+
+restore_all:				# restore full frame
+	.set	noat
+	RESTORE_TEMP
+	RESTORE_AT
+	RESTORE_STATIC
+restore_partial:		# restore partial frame
+#ifdef CONFIG_TRACE_IRQFLAGS
+	SAVE_STATIC
+	SAVE_AT
+	SAVE_TEMP
+	LONG_L	v0, PT_STATUS(sp)
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+	and	v0, ST0_IEP
+#else
+	and	v0, ST0_IE
+#endif
+	beqz	v0, 1f
+	jal	trace_hardirqs_on
+	b	2f
+1:	jal	trace_hardirqs_off
+2:
+	RESTORE_TEMP
+	RESTORE_AT
+	RESTORE_STATIC
+#endif
+	RESTORE_SOME
+	RESTORE_SP_AND_RET
+	.set	at
+
+#ifdef CONFIG_MIPSR2_TO_R6_EMULATOR
+restore_all_from_r2_emul:			# restore full frame
+	.set	noat
+	sw	zero, TI_R2_EMUL_RET($28)	# reset it
+	RESTORE_TEMP
+	RESTORE_AT
+	RESTORE_STATIC
+	RESTORE_SOME
+	LONG_L	sp, PT_R29(sp)
+	eretnc
+	.set	at
+#endif
+
+work_pending:
+	andi	t0, a2, _TIF_NEED_RESCHED # a2 is preloaded with TI_FLAGS
+	beqz	t0, work_notifysig
+work_resched:
+	jal	schedule
+
+	local_irq_disable		# make sure need_resched and
+					# signals dont change between
+					# sampling and return
+	LONG_L	a2, TI_FLAGS($28)
+	andi	t0, a2, _TIF_WORK_MASK	# is there any work to be done
+					# other than syscall tracing?
+	beqz	t0, restore_all
+	andi	t0, a2, _TIF_NEED_RESCHED
+	bnez	t0, work_resched
+
+work_notifysig:				# deal with pending signals and
+					# notify-resume requests
+	move	a0, sp
+	li	a1, 0
+	jal	do_notify_resume	# a2 already loaded
+	j	resume_userspace_check
+
+FEXPORT(syscall_exit_partial)
+	local_irq_disable		# make sure need_resched doesn't
+					# change between and return
+	LONG_L	a2, TI_FLAGS($28)	# current->work
+	li	t0, _TIF_ALLWORK_MASK
+	and	t0, a2
+	beqz	t0, restore_partial
+	SAVE_STATIC
+syscall_exit_work:
+	LONG_L	t0, PT_STATUS(sp)		# returning to kernel mode?
+	andi	t0, t0, KU_USER
+	beqz	t0, resume_kernel
+	li	t0, _TIF_WORK_SYSCALL_EXIT
+	and	t0, a2			# a2 is preloaded with TI_FLAGS
+	beqz	t0, work_pending	# trace bit set?
+	local_irq_enable		# could let syscall_trace_leave()
+					# call schedule() instead
+	move	a0, sp
+	jal	syscall_trace_leave
+	b	resume_userspace
+
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) || \
+    defined(CONFIG_MIPS_MT)
+
+/*
+ * MIPS32R2 Instruction Hazard Barrier - must be called
+ *
+ * For C code use the inline version named instruction_hazard().
+ */
+LEAF(mips_ihb)
+	.set	MIPS_ISA_LEVEL_RAW
+	jr.hb	ra
+	nop
+	END(mips_ihb)
+
+#endif /* CONFIG_CPU_MIPSR2 or CONFIG_CPU_MIPSR6 or CONFIG_MIPS_MT */
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
new file mode 100644
index 000000000..937c54bc8
--- /dev/null
+++ b/arch/mips/kernel/ftrace.c
@@ -0,0 +1,440 @@
+/*
+ * Code for replacing ftrace calls with jumps.
+ *
+ * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
+ * Copyright (C) 2009, 2010 DSLab, Lanzhou University, China
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ *
+ * Thanks goes to Steven Rostedt for writing the original x86 version.
+ */
+
+#include <linux/uaccess.h>
+#include <linux/init.h>
+#include <linux/ftrace.h>
+#include <linux/syscalls.h>
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cacheflush.h>
+#include <asm/syscall.h>
+#include <asm/uasm.h>
+#include <asm/unistd.h>
+
+#include <asm-generic/sections.h>
+
+#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
+#define MCOUNT_OFFSET_INSNS 5
+#else
+#define MCOUNT_OFFSET_INSNS 4
+#endif
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+/* Arch override because MIPS doesn't need to run this from stop_machine() */
+void arch_ftrace_update_code(int command)
+{
+	ftrace_modify_all_code(command);
+}
+
+#endif
+
+/*
+ * Check if the address is in kernel space
+ *
+ * Clone core_kernel_text() from kernel/extable.c, but doesn't call
+ * init_kernel_text() for Ftrace doesn't trace functions in init sections.
+ */
+static inline int in_kernel_space(unsigned long ip)
+{
+	if (ip >= (unsigned long)_stext &&
+	    ip <= (unsigned long)_etext)
+		return 1;
+	return 0;
+}
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+#define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
+#define ADDR_MASK 0x03ffffff	/*  op_code|addr : 31...26|25 ....0 */
+#define JUMP_RANGE_MASK ((1UL << 28) - 1)
+
+#define INSN_NOP 0x00000000	/* nop */
+#define INSN_JAL(addr)	\
+	((unsigned int)(JAL | (((addr) >> 2) & ADDR_MASK)))
+
+static unsigned int insn_jal_ftrace_caller __read_mostly;
+static unsigned int insn_la_mcount[2] __read_mostly;
+static unsigned int insn_j_ftrace_graph_caller __maybe_unused __read_mostly;
+
+static inline void ftrace_dyn_arch_init_insns(void)
+{
+	u32 *buf;
+	unsigned int v1;
+
+	/* la v1, _mcount */
+	v1 = 3;
+	buf = (u32 *)&insn_la_mcount[0];
+	UASM_i_LA(&buf, v1, MCOUNT_ADDR);
+
+	/* jal (ftrace_caller + 8), jump over the first two instruction */
+	buf = (u32 *)&insn_jal_ftrace_caller;
+	uasm_i_jal(&buf, (FTRACE_ADDR + 8) & JUMP_RANGE_MASK);
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* j ftrace_graph_caller */
+	buf = (u32 *)&insn_j_ftrace_graph_caller;
+	uasm_i_j(&buf, (unsigned long)ftrace_graph_caller & JUMP_RANGE_MASK);
+#endif
+}
+
+static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
+{
+	int faulted;
+	mm_segment_t old_fs;
+
+	/* *(unsigned int *)ip = new_code; */
+	safe_store_code(new_code, ip, faulted);
+
+	if (unlikely(faulted))
+		return -EFAULT;
+
+	old_fs = get_fs();
+	set_fs(get_ds());
+	flush_icache_range(ip, ip + 8);
+	set_fs(old_fs);
+
+	return 0;
+}
+
+#ifndef CONFIG_64BIT
+static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1,
+				unsigned int new_code2)
+{
+	int faulted;
+	mm_segment_t old_fs;
+
+	safe_store_code(new_code1, ip, faulted);
+	if (unlikely(faulted))
+		return -EFAULT;
+
+	ip += 4;
+	safe_store_code(new_code2, ip, faulted);
+	if (unlikely(faulted))
+		return -EFAULT;
+
+	ip -= 4;
+	old_fs = get_fs();
+	set_fs(get_ds());
+	flush_icache_range(ip, ip + 8);
+	set_fs(old_fs);
+
+	return 0;
+}
+
+static int ftrace_modify_code_2r(unsigned long ip, unsigned int new_code1,
+				 unsigned int new_code2)
+{
+	int faulted;
+	mm_segment_t old_fs;
+
+	ip += 4;
+	safe_store_code(new_code2, ip, faulted);
+	if (unlikely(faulted))
+		return -EFAULT;
+
+	ip -= 4;
+	safe_store_code(new_code1, ip, faulted);
+	if (unlikely(faulted))
+		return -EFAULT;
+
+	old_fs = get_fs();
+	set_fs(get_ds());
+	flush_icache_range(ip, ip + 8);
+	set_fs(old_fs);
+
+	return 0;
+}
+#endif
+
+/*
+ * The details about the calling site of mcount on MIPS
+ *
+ * 1. For kernel:
+ *
+ * move at, ra
+ * jal _mcount		--> nop
+ *  sub sp, sp, 8	--> nop  (CONFIG_32BIT)
+ *
+ * 2. For modules:
+ *
+ * 2.1 For KBUILD_MCOUNT_RA_ADDRESS and CONFIG_32BIT
+ *
+ * lui v1, hi_16bit_of_mcount	     --> b 1f (0x10000005)
+ * addiu v1, v1, low_16bit_of_mcount --> nop  (CONFIG_32BIT)
+ * move at, ra
+ * move $12, ra_address
+ * jalr v1
+ *  sub sp, sp, 8
+ *				    1: offset = 5 instructions
+ * 2.2 For the Other situations
+ *
+ * lui v1, hi_16bit_of_mcount	     --> b 1f (0x10000004)
+ * addiu v1, v1, low_16bit_of_mcount --> nop  (CONFIG_32BIT)
+ * move at, ra
+ * jalr v1
+ *  nop | move $12, ra_address | sub sp, sp, 8
+ *				    1: offset = 4 instructions
+ */
+
+#define INSN_B_1F (0x10000000 | MCOUNT_OFFSET_INSNS)
+
+int ftrace_make_nop(struct module *mod,
+		    struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned int new;
+	unsigned long ip = rec->ip;
+
+	/*
+	 * If ip is in kernel space, no long call, otherwise, long call is
+	 * needed.
+	 */
+	new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F;
+#ifdef CONFIG_64BIT
+	return ftrace_modify_code(ip, new);
+#else
+	/*
+	 * On 32 bit MIPS platforms, gcc adds a stack adjust
+	 * instruction in the delay slot after the branch to
+	 * mcount and expects mcount to restore the sp on return.
+	 * This is based on a legacy API and does nothing but
+	 * waste instructions so it's being removed at runtime.
+	 */
+	return ftrace_modify_code_2(ip, new, INSN_NOP);
+#endif
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned int new;
+	unsigned long ip = rec->ip;
+
+	new = in_kernel_space(ip) ? insn_jal_ftrace_caller : insn_la_mcount[0];
+
+#ifdef CONFIG_64BIT
+	return ftrace_modify_code(ip, new);
+#else
+	return ftrace_modify_code_2r(ip, new, in_kernel_space(ip) ?
+						INSN_NOP : insn_la_mcount[1]);
+#endif
+}
+
+#define FTRACE_CALL_IP ((unsigned long)(&ftrace_call))
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned int new;
+
+	new = INSN_JAL((unsigned long)func);
+
+	return ftrace_modify_code(FTRACE_CALL_IP, new);
+}
+
+int __init ftrace_dyn_arch_init(void)
+{
+	/* Encode the instructions when booting */
+	ftrace_dyn_arch_init_insns();
+
+	/* Remove "b ftrace_stub" to ensure ftrace_caller() is executed */
+	ftrace_modify_code(MCOUNT_ADDR, INSN_NOP);
+
+	return 0;
+}
+#endif	/* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+extern void ftrace_graph_call(void);
+#define FTRACE_GRAPH_CALL_IP	((unsigned long)(&ftrace_graph_call))
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP,
+			insn_j_ftrace_graph_caller);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, INSN_NOP);
+}
+
+#endif	/* CONFIG_DYNAMIC_FTRACE */
+
+#ifndef KBUILD_MCOUNT_RA_ADDRESS
+
+#define S_RA_SP (0xafbf << 16)	/* s{d,w} ra, offset(sp) */
+#define S_R_SP	(0xafb0 << 16)	/* s{d,w} R, offset(sp) */
+#define OFFSET_MASK	0xffff	/* stack offset range: 0 ~ PT_SIZE */
+
+unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
+		old_parent_ra, unsigned long parent_ra_addr, unsigned long fp)
+{
+	unsigned long sp, ip, tmp;
+	unsigned int code;
+	int faulted;
+
+	/*
+	 * For module, move the ip from the return address after the
+	 * instruction "lui v1, hi_16bit_of_mcount"(offset is 24), but for
+	 * kernel, move after the instruction "move ra, at"(offset is 16)
+	 */
+	ip = self_ra - (in_kernel_space(self_ra) ? 16 : 24);
+
+	/*
+	 * search the text until finding the non-store instruction or "s{d,w}
+	 * ra, offset(sp)" instruction
+	 */
+	do {
+		/* get the code at "ip": code = *(unsigned int *)ip; */
+		safe_load_code(code, ip, faulted);
+
+		if (unlikely(faulted))
+			return 0;
+		/*
+		 * If we hit the non-store instruction before finding where the
+		 * ra is stored, then this is a leaf function and it does not
+		 * store the ra on the stack
+		 */
+		if ((code & S_R_SP) != S_R_SP)
+			return parent_ra_addr;
+
+		/* Move to the next instruction */
+		ip -= 4;
+	} while ((code & S_RA_SP) != S_RA_SP);
+
+	sp = fp + (code & OFFSET_MASK);
+
+	/* tmp = *(unsigned long *)sp; */
+	safe_load_stack(tmp, sp, faulted);
+	if (unlikely(faulted))
+		return 0;
+
+	if (tmp == old_parent_ra)
+		return sp;
+	return 0;
+}
+
+#endif	/* !KBUILD_MCOUNT_RA_ADDRESS */
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
+			   unsigned long fp)
+{
+	unsigned long old_parent_ra;
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)
+	    &return_to_handler;
+	int faulted, insns;
+
+	if (unlikely(ftrace_graph_is_dead()))
+		return;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	/*
+	 * "parent_ra_addr" is the stack address saved the return address of
+	 * the caller of _mcount.
+	 *
+	 * if the gcc < 4.5, a leaf function does not save the return address
+	 * in the stack address, so, we "emulate" one in _mcount's stack space,
+	 * and hijack it directly, but for a non-leaf function, it save the
+	 * return address to the its own stack space, we can not hijack it
+	 * directly, but need to find the real stack address,
+	 * ftrace_get_parent_addr() does it!
+	 *
+	 * if gcc>= 4.5, with the new -mmcount-ra-address option, for a
+	 * non-leaf function, the location of the return address will be saved
+	 * to $12 for us, and for a leaf function, only put a zero into $12. we
+	 * do it in ftrace_graph_caller of mcount.S.
+	 */
+
+	/* old_parent_ra = *parent_ra_addr; */
+	safe_load_stack(old_parent_ra, parent_ra_addr, faulted);
+	if (unlikely(faulted))
+		goto out;
+#ifndef KBUILD_MCOUNT_RA_ADDRESS
+	parent_ra_addr = (unsigned long *)ftrace_get_parent_ra_addr(self_ra,
+			old_parent_ra, (unsigned long)parent_ra_addr, fp);
+	/*
+	 * If fails when getting the stack address of the non-leaf function's
+	 * ra, stop function graph tracer and return
+	 */
+	if (parent_ra_addr == 0)
+		goto out;
+#endif
+	/* *parent_ra_addr = return_hooker; */
+	safe_store_stack(return_hooker, parent_ra_addr, faulted);
+	if (unlikely(faulted))
+		goto out;
+
+	if (ftrace_push_return_trace(old_parent_ra, self_ra, &trace.depth, fp)
+	    == -EBUSY) {
+		*parent_ra_addr = old_parent_ra;
+		return;
+	}
+
+	/*
+	 * Get the recorded ip of the current mcount calling site in the
+	 * __mcount_loc section, which will be used to filter the function
+	 * entries configured through the tracing/set_graph_function interface.
+	 */
+
+	insns = in_kernel_space(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1;
+	trace.func = self_ra - (MCOUNT_INSN_SIZE * insns);
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		*parent_ra_addr = old_parent_ra;
+	}
+	return;
+out:
+	ftrace_graph_stop();
+	WARN_ON(1);
+}
+#endif	/* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+
+#ifdef CONFIG_32BIT
+unsigned long __init arch_syscall_addr(int nr)
+{
+	return (unsigned long)sys_call_table[nr - __NR_O32_Linux];
+}
+#endif
+
+#ifdef CONFIG_64BIT
+
+unsigned long __init arch_syscall_addr(int nr)
+{
+#ifdef CONFIG_MIPS32_N32
+	if (nr >= __NR_N32_Linux && nr <= __NR_N32_Linux + __NR_N32_Linux_syscalls)
+		return (unsigned long)sysn32_call_table[nr - __NR_N32_Linux];
+#endif
+	if (nr >= __NR_64_Linux  && nr <= __NR_64_Linux + __NR_64_Linux_syscalls)
+		return (unsigned long)sys_call_table[nr - __NR_64_Linux];
+#ifdef CONFIG_MIPS32_O32
+	if (nr >= __NR_O32_Linux && nr <= __NR_O32_Linux + __NR_O32_Linux_syscalls)
+		return (unsigned long)sys32_call_table[nr - __NR_O32_Linux];
+#endif
+
+	return (unsigned long) &sys_ni_syscall;
+}
+#endif
+
+#endif /* CONFIG_FTRACE_SYSCALLS */
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
new file mode 100644
index 000000000..af42e7003
--- /dev/null
+++ b/arch/mips/kernel/genex.S
@@ -0,0 +1,543 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2002, 2007  Maciej W. Rozycki
+ * Copyright (C) 2001, 2012 MIPS Technologies, Inc.  All rights reserved.
+ */
+#include <linux/init.h>
+
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/cacheops.h>
+#include <asm/irqflags.h>
+#include <asm/regdef.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+#include <asm/war.h>
+#include <asm/thread_info.h>
+
+	__INIT
+
+/*
+ * General exception vector for all other CPUs.
+ *
+ * Be careful when changing this, it has to be at most 128 bytes
+ * to fit into space reserved for the exception handler.
+ */
+NESTED(except_vec3_generic, 0, sp)
+	.set	push
+	.set	noat
+#if R5432_CP0_INTERRUPT_WAR
+	mfc0	k0, CP0_INDEX
+#endif
+	mfc0	k1, CP0_CAUSE
+	andi	k1, k1, 0x7c
+#ifdef CONFIG_64BIT
+	dsll	k1, k1, 1
+#endif
+	PTR_L	k0, exception_handlers(k1)
+	jr	k0
+	.set	pop
+	END(except_vec3_generic)
+
+/*
+ * General exception handler for CPUs with virtual coherency exception.
+ *
+ * Be careful when changing this, it has to be at most 256 (as a special
+ * exception) bytes to fit into space reserved for the exception handler.
+ */
+NESTED(except_vec3_r4000, 0, sp)
+	.set	push
+	.set	arch=r4000
+	.set	noat
+	mfc0	k1, CP0_CAUSE
+	li	k0, 31<<2
+	andi	k1, k1, 0x7c
+	.set	push
+	.set	noreorder
+	.set	nomacro
+	beq	k1, k0, handle_vced
+	 li	k0, 14<<2
+	beq	k1, k0, handle_vcei
+#ifdef CONFIG_64BIT
+	 dsll	k1, k1, 1
+#endif
+	.set	pop
+	PTR_L	k0, exception_handlers(k1)
+	jr	k0
+
+	/*
+	 * Big shit, we now may have two dirty primary cache lines for the same
+	 * physical address.  We can safely invalidate the line pointed to by
+	 * c0_badvaddr because after return from this exception handler the
+	 * load / store will be re-executed.
+	 */
+handle_vced:
+	MFC0	k0, CP0_BADVADDR
+	li	k1, -4					# Is this ...
+	and	k0, k1					# ... really needed?
+	mtc0	zero, CP0_TAGLO
+	cache	Index_Store_Tag_D, (k0)
+	cache	Hit_Writeback_Inv_SD, (k0)
+#ifdef CONFIG_PROC_FS
+	PTR_LA	k0, vced_count
+	lw	k1, (k0)
+	addiu	k1, 1
+	sw	k1, (k0)
+#endif
+	eret
+
+handle_vcei:
+	MFC0	k0, CP0_BADVADDR
+	cache	Hit_Writeback_Inv_SD, (k0)		# also cleans pi
+#ifdef CONFIG_PROC_FS
+	PTR_LA	k0, vcei_count
+	lw	k1, (k0)
+	addiu	k1, 1
+	sw	k1, (k0)
+#endif
+	eret
+	.set	pop
+	END(except_vec3_r4000)
+
+	__FINIT
+
+	.align	5	/* 32 byte rollback region */
+LEAF(__r4k_wait)
+	.set	push
+	.set	noreorder
+	/* start of rollback region */
+	LONG_L	t0, TI_FLAGS($28)
+	nop
+	andi	t0, _TIF_NEED_RESCHED
+	bnez	t0, 1f
+	 nop
+	nop
+	nop
+#ifdef CONFIG_CPU_MICROMIPS
+	nop
+	nop
+	nop
+	nop
+#endif
+	.set	MIPS_ISA_ARCH_LEVEL_RAW
+	wait
+	/* end of rollback region (the region size must be power of two) */
+1:
+	jr	ra
+	nop
+	.set	pop
+	END(__r4k_wait)
+
+	.macro	BUILD_ROLLBACK_PROLOGUE handler
+	FEXPORT(rollback_\handler)
+	.set	push
+	.set	noat
+	MFC0	k0, CP0_EPC
+	PTR_LA	k1, __r4k_wait
+	ori	k0, 0x1f	/* 32 byte rollback region */
+	xori	k0, 0x1f
+	bne	k0, k1, 9f
+	MTC0	k0, CP0_EPC
+9:
+	.set pop
+	.endm
+
+	.align	5
+BUILD_ROLLBACK_PROLOGUE handle_int
+NESTED(handle_int, PT_SIZE, sp)
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/*
+	 * Check to see if the interrupted code has just disabled
+	 * interrupts and ignore this interrupt for now if so.
+	 *
+	 * local_irq_disable() disables interrupts and then calls
+	 * trace_hardirqs_off() to track the state. If an interrupt is taken
+	 * after interrupts are disabled but before the state is updated
+	 * it will appear to restore_all that it is incorrectly returning with
+	 * interrupts disabled
+	 */
+	.set	push
+	.set	noat
+	mfc0	k0, CP0_STATUS
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+	and	k0, ST0_IEP
+	bnez	k0, 1f
+
+	mfc0	k0, CP0_EPC
+	.set	noreorder
+	j	k0
+	rfe
+#else
+	and	k0, ST0_IE
+	bnez	k0, 1f
+
+	eret
+#endif
+1:
+	.set pop
+#endif
+	SAVE_ALL
+	CLI
+	TRACE_IRQS_OFF
+
+	LONG_L	s0, TI_REGS($28)
+	LONG_S	sp, TI_REGS($28)
+	PTR_LA	ra, ret_from_irq
+	PTR_LA  v0, plat_irq_dispatch
+	jr	v0
+#ifdef CONFIG_CPU_MICROMIPS
+	nop
+#endif
+	END(handle_int)
+
+	__INIT
+
+/*
+ * Special interrupt vector for MIPS64 ISA & embedded MIPS processors.
+ * This is a dedicated interrupt exception vector which reduces the
+ * interrupt processing overhead.  The jump instruction will be replaced
+ * at the initialization time.
+ *
+ * Be careful when changing this, it has to be at most 128 bytes
+ * to fit into space reserved for the exception handler.
+ */
+NESTED(except_vec4, 0, sp)
+1:	j	1b			/* Dummy, will be replaced */
+	END(except_vec4)
+
+/*
+ * EJTAG debug exception handler.
+ * The EJTAG debug exception entry point is 0xbfc00480, which
+ * normally is in the boot PROM, so the boot PROM must do an
+ * unconditional jump to this vector.
+ */
+NESTED(except_vec_ejtag_debug, 0, sp)
+	j	ejtag_debug_handler
+#ifdef CONFIG_CPU_MICROMIPS
+	 nop
+#endif
+	END(except_vec_ejtag_debug)
+
+	__FINIT
+
+/*
+ * Vectored interrupt handler.
+ * This prototype is copied to ebase + n*IntCtl.VS and patched
+ * to invoke the handler
+ */
+BUILD_ROLLBACK_PROLOGUE except_vec_vi
+NESTED(except_vec_vi, 0, sp)
+	SAVE_SOME
+	SAVE_AT
+	.set	push
+	.set	noreorder
+	PTR_LA	v1, except_vec_vi_handler
+FEXPORT(except_vec_vi_lui)
+	lui	v0, 0		/* Patched */
+	jr	v1
+FEXPORT(except_vec_vi_ori)
+	 ori	v0, 0		/* Patched */
+	.set	pop
+	END(except_vec_vi)
+EXPORT(except_vec_vi_end)
+
+/*
+ * Common Vectored Interrupt code
+ * Complete the register saves and invoke the handler which is passed in $v0
+ */
+NESTED(except_vec_vi_handler, 0, sp)
+	SAVE_TEMP
+	SAVE_STATIC
+	CLI
+#ifdef CONFIG_TRACE_IRQFLAGS
+	move	s0, v0
+	TRACE_IRQS_OFF
+	move	v0, s0
+#endif
+
+	LONG_L	s0, TI_REGS($28)
+	LONG_S	sp, TI_REGS($28)
+	PTR_LA	ra, ret_from_irq
+	jr	v0
+	END(except_vec_vi_handler)
+
+/*
+ * EJTAG debug exception handler.
+ */
+NESTED(ejtag_debug_handler, PT_SIZE, sp)
+	.set	push
+	.set	noat
+	MTC0	k0, CP0_DESAVE
+	mfc0	k0, CP0_DEBUG
+
+	sll	k0, k0, 30	# Check for SDBBP.
+	bgez	k0, ejtag_return
+
+	PTR_LA	k0, ejtag_debug_buffer
+	LONG_S	k1, 0(k0)
+	SAVE_ALL
+	move	a0, sp
+	jal	ejtag_exception_handler
+	RESTORE_ALL
+	PTR_LA	k0, ejtag_debug_buffer
+	LONG_L	k1, 0(k0)
+
+ejtag_return:
+	MFC0	k0, CP0_DESAVE
+	.set	mips32
+	deret
+	.set pop
+	END(ejtag_debug_handler)
+
+/*
+ * This buffer is reserved for the use of the EJTAG debug
+ * handler.
+ */
+	.data
+EXPORT(ejtag_debug_buffer)
+	.fill	LONGSIZE
+	.previous
+
+	__INIT
+
+/*
+ * NMI debug exception handler for MIPS reference boards.
+ * The NMI debug exception entry point is 0xbfc00000, which
+ * normally is in the boot PROM, so the boot PROM must do a
+ * unconditional jump to this vector.
+ */
+NESTED(except_vec_nmi, 0, sp)
+	j	nmi_handler
+#ifdef CONFIG_CPU_MICROMIPS
+	 nop
+#endif
+	END(except_vec_nmi)
+
+	__FINIT
+
+NESTED(nmi_handler, PT_SIZE, sp)
+	.set	push
+	.set	noat
+	/*
+	 * Clear ERL - restore segment mapping
+	 * Clear BEV - required for page fault exception handler to work
+	 */
+	mfc0	k0, CP0_STATUS
+	ori     k0, k0, ST0_EXL
+	li	k1, ~(ST0_BEV | ST0_ERL)
+	and     k0, k0, k1
+	mtc0    k0, CP0_STATUS
+	_ehb
+	SAVE_ALL
+	move	a0, sp
+	jal	nmi_exception_handler
+	/* nmi_exception_handler never returns */
+	.set	pop
+	END(nmi_handler)
+
+	.macro	__build_clear_none
+	.endm
+
+	.macro	__build_clear_sti
+	TRACE_IRQS_ON
+	STI
+	.endm
+
+	.macro	__build_clear_cli
+	CLI
+	TRACE_IRQS_OFF
+	.endm
+
+	.macro	__build_clear_fpe
+	.set	push
+	/* gas fails to assemble cfc1 for some archs (octeon).*/ \
+	.set	mips1
+	SET_HARDFLOAT
+	cfc1	a1, fcr31
+	.set	pop
+	CLI
+	TRACE_IRQS_OFF
+	.endm
+
+	.macro	__build_clear_msa_fpe
+	_cfcmsa	a1, MSA_CSR
+	CLI
+	TRACE_IRQS_OFF
+	.endm
+
+	.macro	__build_clear_ade
+	MFC0	t0, CP0_BADVADDR
+	PTR_S	t0, PT_BVADDR(sp)
+	KMODE
+	.endm
+
+	.macro	__BUILD_silent exception
+	.endm
+
+	/* Gas tries to parse the PRINT argument as a string containing
+	   string escapes and emits bogus warnings if it believes to
+	   recognize an unknown escape code.  So make the arguments
+	   start with an n and gas will believe \n is ok ...  */
+	.macro	__BUILD_verbose nexception
+	LONG_L	a1, PT_EPC(sp)
+#ifdef CONFIG_32BIT
+	PRINT("Got \nexception at %08lx\012")
+#endif
+#ifdef CONFIG_64BIT
+	PRINT("Got \nexception at %016lx\012")
+#endif
+	.endm
+
+	.macro	__BUILD_count exception
+	LONG_L	t0,exception_count_\exception
+	LONG_ADDIU t0, 1
+	LONG_S	t0,exception_count_\exception
+	.comm	exception_count\exception, 8, 8
+	.endm
+
+	.macro	__BUILD_HANDLER exception handler clear verbose ext
+	.align	5
+	NESTED(handle_\exception, PT_SIZE, sp)
+	.set	noat
+	SAVE_ALL
+	FEXPORT(handle_\exception\ext)
+	__BUILD_clear_\clear
+	.set	at
+	__BUILD_\verbose \exception
+	move	a0, sp
+	PTR_LA	ra, ret_from_exception
+	j	do_\handler
+	END(handle_\exception)
+	.endm
+
+	.macro	BUILD_HANDLER exception handler clear verbose
+	__BUILD_HANDLER \exception \handler \clear \verbose _int
+	.endm
+
+	BUILD_HANDLER adel ade ade silent		/* #4  */
+	BUILD_HANDLER ades ade ade silent		/* #5  */
+	BUILD_HANDLER ibe be cli silent			/* #6  */
+	BUILD_HANDLER dbe be cli silent			/* #7  */
+	BUILD_HANDLER bp bp sti silent			/* #9  */
+	BUILD_HANDLER ri ri sti silent			/* #10 */
+	BUILD_HANDLER cpu cpu sti silent		/* #11 */
+	BUILD_HANDLER ov ov sti silent			/* #12 */
+	BUILD_HANDLER tr tr sti silent			/* #13 */
+	BUILD_HANDLER msa_fpe msa_fpe msa_fpe silent	/* #14 */
+	BUILD_HANDLER fpe fpe fpe silent		/* #15 */
+	BUILD_HANDLER ftlb ftlb none silent		/* #16 */
+	BUILD_HANDLER msa msa sti silent		/* #21 */
+	BUILD_HANDLER mdmx mdmx sti silent		/* #22 */
+#ifdef	CONFIG_HARDWARE_WATCHPOINTS
+	/*
+	 * For watch, interrupts will be enabled after the watch
+	 * registers are read.
+	 */
+	BUILD_HANDLER watch watch cli silent		/* #23 */
+#else
+	BUILD_HANDLER watch watch sti verbose		/* #23 */
+#endif
+	BUILD_HANDLER mcheck mcheck cli verbose		/* #24 */
+	BUILD_HANDLER mt mt sti silent			/* #25 */
+	BUILD_HANDLER dsp dsp sti silent		/* #26 */
+	BUILD_HANDLER reserved reserved sti verbose	/* others */
+
+	.align	5
+	LEAF(handle_ri_rdhwr_vivt)
+	.set	push
+	.set	noat
+	.set	noreorder
+	/* check if TLB contains a entry for EPC */
+	MFC0	k1, CP0_ENTRYHI
+	andi	k1, 0xff	/* ASID_MASK */
+	MFC0	k0, CP0_EPC
+	PTR_SRL k0, _PAGE_SHIFT + 1
+	PTR_SLL k0, _PAGE_SHIFT + 1
+	or	k1, k0
+	MTC0	k1, CP0_ENTRYHI
+	mtc0_tlbw_hazard
+	tlbp
+	tlb_probe_hazard
+	mfc0	k1, CP0_INDEX
+	.set	pop
+	bltz	k1, handle_ri	/* slow path */
+	/* fall thru */
+	END(handle_ri_rdhwr_vivt)
+
+	LEAF(handle_ri_rdhwr)
+	.set	push
+	.set	noat
+	.set	noreorder
+	/* MIPS32:    0x7c03e83b: rdhwr v1,$29 */
+	/* microMIPS: 0x007d6b3c: rdhwr v1,$29 */
+	MFC0	k1, CP0_EPC
+#if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_CPU_MIPS64_R2)
+	and     k0, k1, 1
+	beqz    k0, 1f
+	xor     k1, k0
+	lhu     k0, (k1)
+	lhu     k1, 2(k1)
+	ins     k1, k0, 16, 16
+	lui     k0, 0x007d
+	b       docheck
+	ori     k0, 0x6b3c
+1:
+	lui     k0, 0x7c03
+	lw      k1, (k1)
+	ori     k0, 0xe83b
+#else
+	andi    k0, k1, 1
+	bnez    k0, handle_ri
+	lui     k0, 0x7c03
+	lw      k1, (k1)
+	ori     k0, 0xe83b
+#endif
+	.set    reorder
+docheck:
+	bne	k0, k1, handle_ri	/* if not ours */
+
+isrdhwr:
+	/* The insn is rdhwr.  No need to check CAUSE.BD here. */
+	get_saved_sp	/* k1 := current_thread_info */
+	.set	noreorder
+	MFC0	k0, CP0_EPC
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+	ori	k1, _THREAD_MASK
+	xori	k1, _THREAD_MASK
+	LONG_L	v1, TI_TP_VALUE(k1)
+	LONG_ADDIU	k0, 4
+	jr	k0
+	 rfe
+#else
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+	LONG_ADDIU	k0, 4		/* stall on $k0 */
+#else
+	.set	at=v1
+	LONG_ADDIU	k0, 4
+	.set	noat
+#endif
+	MTC0	k0, CP0_EPC
+	/* I hope three instructions between MTC0 and ERET are enough... */
+	ori	k1, _THREAD_MASK
+	xori	k1, _THREAD_MASK
+	LONG_L	v1, TI_TP_VALUE(k1)
+	.set	arch=r4000
+	eret
+	.set	mips0
+#endif
+	.set	pop
+	END(handle_ri_rdhwr)
+
+#ifdef CONFIG_64BIT
+/* A temporary overflow handler used by check_daddi(). */
+
+	__INIT
+
+	BUILD_HANDLER  daddi_ov daddi_ov none silent	/* #12 */
+#endif
diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c
new file mode 100644
index 000000000..c6854d9df
--- /dev/null
+++ b/arch/mips/kernel/gpio_txx9.c
@@ -0,0 +1,89 @@
+/*
+ * A gpio chip driver for TXx9 SoCs
+ *
+ * Copyright (C) 2008 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <asm/txx9pio.h>
+
+static DEFINE_SPINLOCK(txx9_gpio_lock);
+
+static struct txx9_pio_reg __iomem *txx9_pioptr;
+
+static int txx9_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	return __raw_readl(&txx9_pioptr->din) & (1 << offset);
+}
+
+static void txx9_gpio_set_raw(unsigned int offset, int value)
+{
+	u32 val;
+	val = __raw_readl(&txx9_pioptr->dout);
+	if (value)
+		val |= 1 << offset;
+	else
+		val &= ~(1 << offset);
+	__raw_writel(val, &txx9_pioptr->dout);
+}
+
+static void txx9_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			  int value)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&txx9_gpio_lock, flags);
+	txx9_gpio_set_raw(offset, value);
+	mmiowb();
+	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
+}
+
+static int txx9_gpio_dir_in(struct gpio_chip *chip, unsigned int offset)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&txx9_gpio_lock, flags);
+	__raw_writel(__raw_readl(&txx9_pioptr->dir) & ~(1 << offset),
+		     &txx9_pioptr->dir);
+	mmiowb();
+	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
+	return 0;
+}
+
+static int txx9_gpio_dir_out(struct gpio_chip *chip, unsigned int offset,
+			     int value)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&txx9_gpio_lock, flags);
+	txx9_gpio_set_raw(offset, value);
+	__raw_writel(__raw_readl(&txx9_pioptr->dir) | (1 << offset),
+		     &txx9_pioptr->dir);
+	mmiowb();
+	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
+	return 0;
+}
+
+static struct gpio_chip txx9_gpio_chip = {
+	.get = txx9_gpio_get,
+	.set = txx9_gpio_set,
+	.direction_input = txx9_gpio_dir_in,
+	.direction_output = txx9_gpio_dir_out,
+	.label = "TXx9",
+};
+
+int __init txx9_gpio_init(unsigned long baseaddr,
+			  unsigned int base, unsigned int num)
+{
+	txx9_pioptr = ioremap(baseaddr, sizeof(struct txx9_pio_reg));
+	if (!txx9_pioptr)
+		return -ENODEV;
+	txx9_gpio_chip.base = base;
+	txx9_gpio_chip.ngpio = num;
+	return gpiochip_add(&txx9_gpio_chip);
+}
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
new file mode 100644
index 000000000..95afd663c
--- /dev/null
+++ b/arch/mips/kernel/head.S
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995 Waldorf Electronics
+ * Written by Ralf Baechle and Andreas Busse
+ * Copyright (C) 1994 - 99, 2003, 06 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Modified for DECStation and hence R3000 support by Paul M. Antoine
+ * Further modifications by David S. Miller and Harald Koerfgen
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ */
+#include <linux/init.h>
+#include <linux/threads.h>
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/irqflags.h>
+#include <asm/regdef.h>
+#include <asm/pgtable-bits.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+
+#include <kernel-entry-init.h>
+
+	/*
+	 * For the moment disable interrupts, mark the kernel mode and
+	 * set ST0_KX so that the CPU does not spit fire when using
+	 * 64-bit addresses.  A full initialization of the CPU's status
+	 * register is done later in per_cpu_trap_init().
+	 */
+	.macro	setup_c0_status set clr
+	.set	push
+	mfc0	t0, CP0_STATUS
+	or	t0, ST0_CU0|\set|0x1f|\clr
+	xor	t0, 0x1f|\clr
+	mtc0	t0, CP0_STATUS
+	.set	noreorder
+	sll	zero,3				# ehb
+	.set	pop
+	.endm
+
+	.macro	setup_c0_status_pri
+#ifdef CONFIG_64BIT
+	setup_c0_status ST0_KX 0
+#else
+	setup_c0_status 0 0
+#endif
+	.endm
+
+	.macro	setup_c0_status_sec
+#ifdef CONFIG_64BIT
+	setup_c0_status ST0_KX ST0_BEV
+#else
+	setup_c0_status 0 ST0_BEV
+#endif
+	.endm
+
+#ifndef CONFIG_NO_EXCEPT_FILL
+	/*
+	 * Reserved space for exception handlers.
+	 * Necessary for machines which link their kernels at KSEG0.
+	 */
+	.fill	0x400
+#endif
+
+EXPORT(_stext)
+
+#ifdef CONFIG_BOOT_RAW
+	/*
+	 * Give us a fighting chance of running if execution beings at the
+	 * kernel load address.	 This is needed because this platform does
+	 * not have a ELF loader yet.
+	 */
+FEXPORT(__kernel_entry)
+	j	kernel_entry
+#endif
+
+	__REF
+
+NESTED(kernel_entry, 16, sp)			# kernel entry point
+
+	kernel_entry_setup			# cpu specific setup
+
+	setup_c0_status_pri
+
+	/* We might not get launched at the address the kernel is linked to,
+	   so we jump there.  */
+	PTR_LA	t0, 0f
+	jr	t0
+0:
+
+	PTR_LA		t0, __bss_start		# clear .bss
+	LONG_S		zero, (t0)
+	PTR_LA		t1, __bss_stop - LONGSIZE
+1:
+	PTR_ADDIU	t0, LONGSIZE
+	LONG_S		zero, (t0)
+	bne		t0, t1, 1b
+
+	LONG_S		a0, fw_arg0		# firmware arguments
+	LONG_S		a1, fw_arg1
+	LONG_S		a2, fw_arg2
+	LONG_S		a3, fw_arg3
+
+	MTC0		zero, CP0_CONTEXT	# clear context register
+	PTR_LA		$28, init_thread_union
+	/* Set the SP after an empty pt_regs.  */
+	PTR_LI		sp, _THREAD_SIZE - 32 - PT_SIZE
+	PTR_ADDU	sp, $28
+	back_to_back_c0_hazard
+	set_saved_sp	sp, t0, t1
+	PTR_SUBU	sp, 4 * SZREG		# init stack pointer
+
+	j		start_kernel
+	END(kernel_entry)
+
+#ifdef CONFIG_SMP
+/*
+ * SMP slave cpus entry point.	Board specific code for bootstrap calls this
+ * function after setting up the stack and gp registers.
+ */
+NESTED(smp_bootstrap, 16, sp)
+	smp_slave_setup
+	setup_c0_status_sec
+	j	start_secondary
+	END(smp_bootstrap)
+#endif /* CONFIG_SMP */
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
new file mode 100644
index 000000000..c5bc344fc
--- /dev/null
+++ b/arch/mips/kernel/i8253.c
@@ -0,0 +1,39 @@
+/*
+ * i8253.c  8253/PIT functions
+ *
+ */
+#include <linux/clockchips.h>
+#include <linux/i8253.h>
+#include <linux/export.h>
+#include <linux/smp.h>
+#include <linux/irq.h>
+
+#include <asm/time.h>
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	i8253_clockevent.event_handler(&i8253_clockevent);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq0  = {
+	.handler = timer_interrupt,
+	.flags = IRQF_NOBALANCING | IRQF_TIMER,
+	.name = "timer"
+};
+
+void __init setup_pit_timer(void)
+{
+	clockevent_i8253_init(true);
+	setup_irq(0, &irq0);
+}
+
+static int __init init_pit_clocksource(void)
+{
+	if (num_possible_cpus() > 1) /* PIT does not scale! */
+		return 0;
+
+	return clocksource_i8253_init();
+}
+arch_initcall(init_pit_clocksource);
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
new file mode 100644
index 000000000..a74ec3ae5
--- /dev/null
+++ b/arch/mips/kernel/i8259.c
@@ -0,0 +1,345 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Code to handle x86 style IRQs plus some generic interrupt stuff.
+ *
+ * Copyright (C) 1992 Linus Torvalds
+ * Copyright (C) 1994 - 2000 Ralf Baechle
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+#include <linux/irq.h>
+
+#include <asm/i8259.h>
+#include <asm/io.h>
+
+/*
+ * This is the 'legacy' 8259A Programmable Interrupt Controller,
+ * present in the majority of PC/AT boxes.
+ * plus some generic x86 specific things if generic specifics makes
+ * any sense at all.
+ * this file should become arch/i386/kernel/irq.c when the old irq.c
+ * moves to arch independent land
+ */
+
+static int i8259A_auto_eoi = -1;
+DEFINE_RAW_SPINLOCK(i8259A_lock);
+static void disable_8259A_irq(struct irq_data *d);
+static void enable_8259A_irq(struct irq_data *d);
+static void mask_and_ack_8259A(struct irq_data *d);
+static void init_8259A(int auto_eoi);
+
+static struct irq_chip i8259A_chip = {
+	.name			= "XT-PIC",
+	.irq_mask		= disable_8259A_irq,
+	.irq_disable		= disable_8259A_irq,
+	.irq_unmask		= enable_8259A_irq,
+	.irq_mask_ack		= mask_and_ack_8259A,
+};
+
+/*
+ * 8259A PIC functions to handle ISA devices:
+ */
+
+/*
+ * This contains the irq mask for both 8259A irq controllers,
+ */
+static unsigned int cached_irq_mask = 0xffff;
+
+#define cached_master_mask	(cached_irq_mask)
+#define cached_slave_mask	(cached_irq_mask >> 8)
+
+static void disable_8259A_irq(struct irq_data *d)
+{
+	unsigned int mask, irq = d->irq - I8259A_IRQ_BASE;
+	unsigned long flags;
+
+	mask = 1 << irq;
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
+	cached_irq_mask |= mask;
+	if (irq & 8)
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
+	else
+		outb(cached_master_mask, PIC_MASTER_IMR);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+static void enable_8259A_irq(struct irq_data *d)
+{
+	unsigned int mask, irq = d->irq - I8259A_IRQ_BASE;
+	unsigned long flags;
+
+	mask = ~(1 << irq);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
+	cached_irq_mask &= mask;
+	if (irq & 8)
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
+	else
+		outb(cached_master_mask, PIC_MASTER_IMR);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+int i8259A_irq_pending(unsigned int irq)
+{
+	unsigned int mask;
+	unsigned long flags;
+	int ret;
+
+	irq -= I8259A_IRQ_BASE;
+	mask = 1 << irq;
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
+	if (irq < 8)
+		ret = inb(PIC_MASTER_CMD) & mask;
+	else
+		ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
+
+	return ret;
+}
+
+void make_8259A_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_set_chip_and_handler(irq, &i8259A_chip, handle_level_irq);
+	enable_irq(irq);
+}
+
+/*
+ * This function assumes to be called rarely. Switching between
+ * 8259A registers is slow.
+ * This has to be protected by the irq controller spinlock
+ * before being called.
+ */
+static inline int i8259A_irq_real(unsigned int irq)
+{
+	int value;
+	int irqmask = 1 << irq;
+
+	if (irq < 8) {
+		outb(0x0B, PIC_MASTER_CMD);	/* ISR register */
+		value = inb(PIC_MASTER_CMD) & irqmask;
+		outb(0x0A, PIC_MASTER_CMD);	/* back to the IRR register */
+		return value;
+	}
+	outb(0x0B, PIC_SLAVE_CMD);	/* ISR register */
+	value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
+	outb(0x0A, PIC_SLAVE_CMD);	/* back to the IRR register */
+	return value;
+}
+
+/*
+ * Careful! The 8259A is a fragile beast, it pretty
+ * much _has_ to be done exactly like this (mask it
+ * first, _then_ send the EOI, and the order of EOI
+ * to the two 8259s is important!
+ */
+static void mask_and_ack_8259A(struct irq_data *d)
+{
+	unsigned int irqmask, irq = d->irq - I8259A_IRQ_BASE;
+	unsigned long flags;
+
+	irqmask = 1 << irq;
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
+	/*
+	 * Lightweight spurious IRQ detection. We do not want
+	 * to overdo spurious IRQ handling - it's usually a sign
+	 * of hardware problems, so we only do the checks we can
+	 * do without slowing down good hardware unnecessarily.
+	 *
+	 * Note that IRQ7 and IRQ15 (the two spurious IRQs
+	 * usually resulting from the 8259A-1|2 PICs) occur
+	 * even if the IRQ is masked in the 8259A. Thus we
+	 * can check spurious 8259A IRQs without doing the
+	 * quite slow i8259A_irq_real() call for every IRQ.
+	 * This does not cover 100% of spurious interrupts,
+	 * but should be enough to warn the user that there
+	 * is something bad going on ...
+	 */
+	if (cached_irq_mask & irqmask)
+		goto spurious_8259A_irq;
+	cached_irq_mask |= irqmask;
+
+handle_real_irq:
+	if (irq & 8) {
+		inb(PIC_SLAVE_IMR);	/* DUMMY - (do we need this?) */
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
+		outb(0x60+(irq&7), PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
+		outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
+	} else {
+		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */
+		outb(cached_master_mask, PIC_MASTER_IMR);
+		outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */
+	}
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
+	return;
+
+spurious_8259A_irq:
+	/*
+	 * this is the slow path - should happen rarely.
+	 */
+	if (i8259A_irq_real(irq))
+		/*
+		 * oops, the IRQ _is_ in service according to the
+		 * 8259A - not spurious, go handle it.
+		 */
+		goto handle_real_irq;
+
+	{
+		static int spurious_irq_mask;
+		/*
+		 * At this point we can be sure the IRQ is spurious,
+		 * lets ACK and report it. [once per IRQ]
+		 */
+		if (!(spurious_irq_mask & irqmask)) {
+			printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
+			spurious_irq_mask |= irqmask;
+		}
+		atomic_inc(&irq_err_count);
+		/*
+		 * Theoretically we do not have to handle this IRQ,
+		 * but in Linux this does not cause problems and is
+		 * simpler for us.
+		 */
+		goto handle_real_irq;
+	}
+}
+
+static void i8259A_resume(void)
+{
+	if (i8259A_auto_eoi >= 0)
+		init_8259A(i8259A_auto_eoi);
+}
+
+static void i8259A_shutdown(void)
+{
+	/* Put the i8259A into a quiescent state that
+	 * the kernel initialization code can get it
+	 * out of.
+	 */
+	if (i8259A_auto_eoi >= 0) {
+		outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
+		outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
+	}
+}
+
+static struct syscore_ops i8259_syscore_ops = {
+	.resume = i8259A_resume,
+	.shutdown = i8259A_shutdown,
+};
+
+static int __init i8259A_init_sysfs(void)
+{
+	register_syscore_ops(&i8259_syscore_ops);
+	return 0;
+}
+
+device_initcall(i8259A_init_sysfs);
+
+static void init_8259A(int auto_eoi)
+{
+	unsigned long flags;
+
+	i8259A_auto_eoi = auto_eoi;
+
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
+
+	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
+	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
+
+	/*
+	 * outb_p - this has to work on a wide range of PC hardware.
+	 */
+	outb_p(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
+	outb_p(I8259A_IRQ_BASE + 0, PIC_MASTER_IMR);	/* ICW2: 8259A-1 IR0 mapped to I8259A_IRQ_BASE + 0x00 */
+	outb_p(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);	/* 8259A-1 (the master) has a slave on IR2 */
+	if (auto_eoi)	/* master does Auto EOI */
+		outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
+	else		/* master expects normal EOI */
+		outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
+
+	outb_p(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
+	outb_p(I8259A_IRQ_BASE + 8, PIC_SLAVE_IMR);	/* ICW2: 8259A-2 IR0 mapped to I8259A_IRQ_BASE + 0x08 */
+	outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR);	/* 8259A-2 is a slave on master's IR2 */
+	outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
+	if (auto_eoi)
+		/*
+		 * In AEOI mode we just have to mask the interrupt
+		 * when acking.
+		 */
+		i8259A_chip.irq_mask_ack = disable_8259A_irq;
+	else
+		i8259A_chip.irq_mask_ack = mask_and_ack_8259A;
+
+	udelay(100);		/* wait for 8259A to initialize */
+
+	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
+	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
+
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = {
+	.handler = no_action,
+	.name = "cascade",
+	.flags = IRQF_NO_THREAD,
+};
+
+static struct resource pic1_io_resource = {
+	.name = "pic1",
+	.start = PIC_MASTER_CMD,
+	.end = PIC_MASTER_IMR,
+	.flags = IORESOURCE_BUSY
+};
+
+static struct resource pic2_io_resource = {
+	.name = "pic2",
+	.start = PIC_SLAVE_CMD,
+	.end = PIC_SLAVE_IMR,
+	.flags = IORESOURCE_BUSY
+};
+
+static int i8259A_irq_domain_map(struct irq_domain *d, unsigned int virq,
+				 irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(virq, &i8259A_chip, handle_level_irq);
+	irq_set_probe(virq);
+	return 0;
+}
+
+static struct irq_domain_ops i8259A_ops = {
+	.map = i8259A_irq_domain_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+/*
+ * On systems with i8259-style interrupt controllers we assume for
+ * driver compatibility reasons interrupts 0 - 15 to be the i8259
+ * interrupts even if the hardware uses a different interrupt numbering.
+ */
+void __init init_i8259_irqs(void)
+{
+	struct irq_domain *domain;
+
+	insert_resource(&ioport_resource, &pic1_io_resource);
+	insert_resource(&ioport_resource, &pic2_io_resource);
+
+	init_8259A(0);
+
+	domain = irq_domain_add_legacy(NULL, 16, I8259A_IRQ_BASE, 0,
+				       &i8259A_ops, NULL);
+	if (!domain)
+		panic("Failed to add i8259 IRQ domain");
+
+	setup_irq(I8259A_IRQ_BASE + PIC_CASCADE_IR, &irq2);
+}
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
new file mode 100644
index 000000000..e4f62b787
--- /dev/null
+++ b/arch/mips/kernel/idle.c
@@ -0,0 +1,256 @@
+/*
+ * MIPS idle loop and WAIT instruction support.
+ *
+ * Copyright (C) xxxx  the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
+ * Copyright (C) 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2001, 2004, 2011, 2012	 MIPS Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/printk.h>
+#include <linux/sched.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <asm/cpu-type.h>
+#include <asm/idle.h>
+#include <asm/mipsregs.h>
+
+/*
+ * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
+ * the implementation of the "wait" feature differs between CPU families. This
+ * points to the function that implements CPU specific wait.
+ * The wait instruction stops the pipeline and reduces the power consumption of
+ * the CPU very much.
+ */
+void (*cpu_wait)(void);
+EXPORT_SYMBOL(cpu_wait);
+
+static void r3081_wait(void)
+{
+	unsigned long cfg = read_c0_conf();
+	write_c0_conf(cfg | R30XX_CONF_HALT);
+	local_irq_enable();
+}
+
+static void r39xx_wait(void)
+{
+	if (!need_resched())
+		write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
+	local_irq_enable();
+}
+
+void r4k_wait(void)
+{
+	local_irq_enable();
+	__r4k_wait();
+}
+
+/*
+ * This variant is preferable as it allows testing need_resched and going to
+ * sleep depending on the outcome atomically.  Unfortunately the "It is
+ * implementation-dependent whether the pipeline restarts when a non-enabled
+ * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
+ * using this version a gamble.
+ */
+void r4k_wait_irqoff(void)
+{
+	if (!need_resched())
+		__asm__(
+		"	.set	push		\n"
+		"	.set	arch=r4000	\n"
+		"	wait			\n"
+		"	.set	pop		\n");
+	local_irq_enable();
+}
+
+/*
+ * The RM7000 variant has to handle erratum 38.	 The workaround is to not
+ * have any pending stores when the WAIT instruction is executed.
+ */
+static void rm7k_wait_irqoff(void)
+{
+	if (!need_resched())
+		__asm__(
+		"	.set	push					\n"
+		"	.set	arch=r4000				\n"
+		"	.set	noat					\n"
+		"	mfc0	$1, $12					\n"
+		"	sync						\n"
+		"	mtc0	$1, $12		# stalls until W stage	\n"
+		"	wait						\n"
+		"	mtc0	$1, $12		# stalls until W stage	\n"
+		"	.set	pop					\n");
+	local_irq_enable();
+}
+
+/*
+ * Au1 'wait' is only useful when the 32kHz counter is used as timer,
+ * since coreclock (and the cp0 counter) stops upon executing it. Only an
+ * interrupt can wake it, so they must be enabled before entering idle modes.
+ */
+static void au1k_wait(void)
+{
+	unsigned long c0status = read_c0_status() | 1;	/* irqs on */
+
+	__asm__(
+	"	.set	arch=r4000			\n"
+	"	cache	0x14, 0(%0)		\n"
+	"	cache	0x14, 32(%0)		\n"
+	"	sync				\n"
+	"	mtc0	%1, $12			\n" /* wr c0status */
+	"	wait				\n"
+	"	nop				\n"
+	"	nop				\n"
+	"	nop				\n"
+	"	nop				\n"
+	"	.set	mips0			\n"
+	: : "r" (au1k_wait), "r" (c0status));
+}
+
+static int __initdata nowait;
+
+static int __init wait_disable(char *s)
+{
+	nowait = 1;
+
+	return 1;
+}
+
+__setup("nowait", wait_disable);
+
+void __init check_wait(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	if (nowait) {
+		printk("Wait instruction disabled.\n");
+		return;
+	}
+
+	switch (current_cpu_type()) {
+	case CPU_R3081:
+	case CPU_R3081E:
+		cpu_wait = r3081_wait;
+		break;
+	case CPU_TX3927:
+		cpu_wait = r39xx_wait;
+		break;
+	case CPU_R4200:
+/*	case CPU_R4300: */
+	case CPU_R4600:
+	case CPU_R4640:
+	case CPU_R4650:
+	case CPU_R4700:
+	case CPU_R5000:
+	case CPU_R5500:
+	case CPU_NEVADA:
+	case CPU_4KC:
+	case CPU_4KEC:
+	case CPU_4KSC:
+	case CPU_5KC:
+	case CPU_25KF:
+	case CPU_PR4450:
+	case CPU_BMIPS3300:
+	case CPU_BMIPS4350:
+	case CPU_BMIPS4380:
+	case CPU_BMIPS5000:
+	case CPU_CAVIUM_OCTEON:
+	case CPU_CAVIUM_OCTEON_PLUS:
+	case CPU_CAVIUM_OCTEON2:
+	case CPU_CAVIUM_OCTEON3:
+	case CPU_JZRISC:
+	case CPU_LOONGSON1:
+	case CPU_XLR:
+	case CPU_XLP:
+		cpu_wait = r4k_wait;
+		break;
+
+	case CPU_RM7000:
+		cpu_wait = rm7k_wait_irqoff;
+		break;
+
+	case CPU_PROAPTIV:
+	case CPU_P5600:
+		/*
+		 * Incoming Fast Debug Channel (FDC) data during a wait
+		 * instruction causes the wait never to resume, even if an
+		 * interrupt is received. Avoid using wait at all if FDC data is
+		 * likely to be received.
+		 */
+		if (IS_ENABLED(CONFIG_MIPS_EJTAG_FDC_TTY))
+			break;
+		/* fall through */
+	case CPU_M14KC:
+	case CPU_M14KEC:
+	case CPU_24K:
+	case CPU_34K:
+	case CPU_1004K:
+	case CPU_1074K:
+	case CPU_INTERAPTIV:
+	case CPU_M5150:
+	case CPU_QEMU_GENERIC:
+		cpu_wait = r4k_wait;
+		if (read_c0_config7() & MIPS_CONF7_WII)
+			cpu_wait = r4k_wait_irqoff;
+		break;
+
+	case CPU_74K:
+		cpu_wait = r4k_wait;
+		if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
+			cpu_wait = r4k_wait_irqoff;
+		break;
+
+	case CPU_TX49XX:
+		cpu_wait = r4k_wait_irqoff;
+		break;
+	case CPU_ALCHEMY:
+		cpu_wait = au1k_wait;
+		break;
+	case CPU_20KC:
+		/*
+		 * WAIT on Rev1.0 has E1, E2, E3 and E16.
+		 * WAIT on Rev2.0 and Rev3.0 has E16.
+		 * Rev3.1 WAIT is nop, why bother
+		 */
+		if ((c->processor_id & 0xff) <= 0x64)
+			break;
+
+		/*
+		 * Another rev is incremeting c0_count at a reduced clock
+		 * rate while in WAIT mode.  So we basically have the choice
+		 * between using the cp0 timer as clocksource or avoiding
+		 * the WAIT instruction.  Until more details are known,
+		 * disable the use of WAIT for 20Kc entirely.
+		   cpu_wait = r4k_wait;
+		 */
+		break;
+	default:
+		break;
+	}
+}
+
+void arch_cpu_idle(void)
+{
+	if (cpu_wait)
+		cpu_wait();
+	else
+		local_irq_enable();
+}
+
+#ifdef CONFIG_CPU_IDLE
+
+int mips_cpuidle_wait_enter(struct cpuidle_device *dev,
+			    struct cpuidle_driver *drv, int index)
+{
+	arch_cpu_idle();
+	return index;
+}
+
+#endif
diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c
new file mode 100644
index 000000000..44a1f792e
--- /dev/null
+++ b/arch/mips/kernel/irq-gt641xx.c
@@ -0,0 +1,131 @@
+/*
+ *  GT641xx IRQ routines.
+ *
+ *  Copyright (C) 2007	Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/hardirq.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/gt64120.h>
+
+#define GT641XX_IRQ_TO_BIT(irq) (1U << (irq - GT641XX_IRQ_BASE))
+
+static DEFINE_RAW_SPINLOCK(gt641xx_irq_lock);
+
+static void ack_gt641xx_irq(struct irq_data *d)
+{
+	unsigned long flags;
+	u32 cause;
+
+	raw_spin_lock_irqsave(&gt641xx_irq_lock, flags);
+	cause = GT_READ(GT_INTRCAUSE_OFS);
+	cause &= ~GT641XX_IRQ_TO_BIT(d->irq);
+	GT_WRITE(GT_INTRCAUSE_OFS, cause);
+	raw_spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
+}
+
+static void mask_gt641xx_irq(struct irq_data *d)
+{
+	unsigned long flags;
+	u32 mask;
+
+	raw_spin_lock_irqsave(&gt641xx_irq_lock, flags);
+	mask = GT_READ(GT_INTRMASK_OFS);
+	mask &= ~GT641XX_IRQ_TO_BIT(d->irq);
+	GT_WRITE(GT_INTRMASK_OFS, mask);
+	raw_spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
+}
+
+static void mask_ack_gt641xx_irq(struct irq_data *d)
+{
+	unsigned long flags;
+	u32 cause, mask;
+
+	raw_spin_lock_irqsave(&gt641xx_irq_lock, flags);
+	mask = GT_READ(GT_INTRMASK_OFS);
+	mask &= ~GT641XX_IRQ_TO_BIT(d->irq);
+	GT_WRITE(GT_INTRMASK_OFS, mask);
+
+	cause = GT_READ(GT_INTRCAUSE_OFS);
+	cause &= ~GT641XX_IRQ_TO_BIT(d->irq);
+	GT_WRITE(GT_INTRCAUSE_OFS, cause);
+	raw_spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
+}
+
+static void unmask_gt641xx_irq(struct irq_data *d)
+{
+	unsigned long flags;
+	u32 mask;
+
+	raw_spin_lock_irqsave(&gt641xx_irq_lock, flags);
+	mask = GT_READ(GT_INTRMASK_OFS);
+	mask |= GT641XX_IRQ_TO_BIT(d->irq);
+	GT_WRITE(GT_INTRMASK_OFS, mask);
+	raw_spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
+}
+
+static struct irq_chip gt641xx_irq_chip = {
+	.name		= "GT641xx",
+	.irq_ack	= ack_gt641xx_irq,
+	.irq_mask	= mask_gt641xx_irq,
+	.irq_mask_ack	= mask_ack_gt641xx_irq,
+	.irq_unmask	= unmask_gt641xx_irq,
+};
+
+void gt641xx_irq_dispatch(void)
+{
+	u32 cause, mask;
+	int i;
+
+	cause = GT_READ(GT_INTRCAUSE_OFS);
+	mask = GT_READ(GT_INTRMASK_OFS);
+	cause &= mask;
+
+	/*
+	 * bit0 : logical or of all the interrupt bits.
+	 * bit30: logical or of bits[29:26,20:1].
+	 * bit31: logical or of bits[25:1].
+	 */
+	for (i = 1; i < 30; i++) {
+		if (cause & (1U << i)) {
+			do_IRQ(GT641XX_IRQ_BASE + i);
+			return;
+		}
+	}
+
+	atomic_inc(&irq_err_count);
+}
+
+void __init gt641xx_irq_init(void)
+{
+	int i;
+
+	GT_WRITE(GT_INTRMASK_OFS, 0);
+	GT_WRITE(GT_INTRCAUSE_OFS, 0);
+
+	/*
+	 * bit0 : logical or of all the interrupt bits.
+	 * bit30: logical or of bits[29:26,20:1].
+	 * bit31: logical or of bits[25:1].
+	 */
+	for (i = 1; i < 30; i++)
+		irq_set_chip_and_handler(GT641XX_IRQ_BASE + i,
+					 &gt641xx_irq_chip, handle_level_irq);
+}
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
new file mode 100644
index 000000000..a734b2c2f
--- /dev/null
+++ b/arch/mips/kernel/irq-msc01.c
@@ -0,0 +1,159 @@
+/*
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (c) 2004 MIPS Inc
+ * Author: chris@mips.com
+ *
+ * Copyright (C) 2004, 06 Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/msc01_ic.h>
+#include <asm/traps.h>
+
+static unsigned long _icctrl_msc;
+#define MSC01_IC_REG_BASE	_icctrl_msc
+
+#define MSCIC_WRITE(reg, data)	do { *(volatile u32 *)(reg) = data; } while (0)
+#define MSCIC_READ(reg, data)	do { data = *(volatile u32 *)(reg); } while (0)
+
+static unsigned int irq_base;
+
+/* mask off an interrupt */
+static inline void mask_msc_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	if (irq < (irq_base + 32))
+		MSCIC_WRITE(MSC01_IC_DISL, 1<<(irq - irq_base));
+	else
+		MSCIC_WRITE(MSC01_IC_DISH, 1<<(irq - irq_base - 32));
+}
+
+/* unmask an interrupt */
+static inline void unmask_msc_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	if (irq < (irq_base + 32))
+		MSCIC_WRITE(MSC01_IC_ENAL, 1<<(irq - irq_base));
+	else
+		MSCIC_WRITE(MSC01_IC_ENAH, 1<<(irq - irq_base - 32));
+}
+
+/*
+ * Masks and ACKs an IRQ
+ */
+static void level_mask_and_ack_msc_irq(struct irq_data *d)
+{
+	mask_msc_irq(d);
+	if (!cpu_has_veic)
+		MSCIC_WRITE(MSC01_IC_EOI, 0);
+}
+
+/*
+ * Masks and ACKs an IRQ
+ */
+static void edge_mask_and_ack_msc_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	mask_msc_irq(d);
+	if (!cpu_has_veic)
+		MSCIC_WRITE(MSC01_IC_EOI, 0);
+	else {
+		u32 r;
+		MSCIC_READ(MSC01_IC_SUP+irq*8, r);
+		MSCIC_WRITE(MSC01_IC_SUP+irq*8, r | ~MSC01_IC_SUP_EDGE_BIT);
+		MSCIC_WRITE(MSC01_IC_SUP+irq*8, r);
+	}
+}
+
+/*
+ * Interrupt handler for interrupts coming from SOC-it.
+ */
+void ll_msc_irq(void)
+{
+	unsigned int irq;
+
+	/* read the interrupt vector register */
+	MSCIC_READ(MSC01_IC_VEC, irq);
+	if (irq < 64)
+		do_IRQ(irq + irq_base);
+	else {
+		/* Ignore spurious interrupt */
+	}
+}
+
+static void msc_bind_eic_interrupt(int irq, int set)
+{
+	MSCIC_WRITE(MSC01_IC_RAMW,
+		    (irq<<MSC01_IC_RAMW_ADDR_SHF) | (set<<MSC01_IC_RAMW_DATA_SHF));
+}
+
+static struct irq_chip msc_levelirq_type = {
+	.name = "SOC-it-Level",
+	.irq_ack = level_mask_and_ack_msc_irq,
+	.irq_mask = mask_msc_irq,
+	.irq_mask_ack = level_mask_and_ack_msc_irq,
+	.irq_unmask = unmask_msc_irq,
+	.irq_eoi = unmask_msc_irq,
+};
+
+static struct irq_chip msc_edgeirq_type = {
+	.name = "SOC-it-Edge",
+	.irq_ack = edge_mask_and_ack_msc_irq,
+	.irq_mask = mask_msc_irq,
+	.irq_mask_ack = edge_mask_and_ack_msc_irq,
+	.irq_unmask = unmask_msc_irq,
+	.irq_eoi = unmask_msc_irq,
+};
+
+
+void __init init_msc_irqs(unsigned long icubase, unsigned int irqbase, msc_irqmap_t *imp, int nirq)
+{
+	_icctrl_msc = (unsigned long) ioremap(icubase, 0x40000);
+
+	/* Reset interrupt controller - initialises all registers to 0 */
+	MSCIC_WRITE(MSC01_IC_RST, MSC01_IC_RST_RST_BIT);
+
+	board_bind_eic_interrupt = &msc_bind_eic_interrupt;
+
+	for (; nirq > 0; nirq--, imp++) {
+		int n = imp->im_irq;
+
+		switch (imp->im_type) {
+		case MSC01_IRQ_EDGE:
+			irq_set_chip_and_handler_name(irqbase + n,
+						      &msc_edgeirq_type,
+						      handle_edge_irq,
+						      "edge");
+			if (cpu_has_veic)
+				MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT);
+			else
+				MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl);
+			break;
+		case MSC01_IRQ_LEVEL:
+			irq_set_chip_and_handler_name(irqbase + n,
+						      &msc_levelirq_type,
+						      handle_level_irq,
+						      "level");
+			if (cpu_has_veic)
+				MSCIC_WRITE(MSC01_IC_SUP+n*8, 0);
+			else
+				MSCIC_WRITE(MSC01_IC_SUP+n*8, imp->im_lvl);
+		}
+	}
+
+	irq_base = irqbase;
+
+	MSCIC_WRITE(MSC01_IC_GENA, MSC01_IC_GENA_GENA_BIT);	/* Enable interrupt generation */
+
+}
diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c
new file mode 100644
index 000000000..26f4e4c9d
--- /dev/null
+++ b/arch/mips/kernel/irq-rm7000.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2003 Ralf Baechle
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Handler for RM7000 extended interrupts.  These are a non-standard
+ * feature so we handle them separately from standard interrupts.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+
+static inline void unmask_rm7k_irq(struct irq_data *d)
+{
+	set_c0_intcontrol(0x100 << (d->irq - RM7K_CPU_IRQ_BASE));
+}
+
+static inline void mask_rm7k_irq(struct irq_data *d)
+{
+	clear_c0_intcontrol(0x100 << (d->irq - RM7K_CPU_IRQ_BASE));
+}
+
+static struct irq_chip rm7k_irq_controller = {
+	.name = "RM7000",
+	.irq_ack = mask_rm7k_irq,
+	.irq_mask = mask_rm7k_irq,
+	.irq_mask_ack = mask_rm7k_irq,
+	.irq_unmask = unmask_rm7k_irq,
+	.irq_eoi = unmask_rm7k_irq
+};
+
+void __init rm7k_cpu_irq_init(void)
+{
+	int base = RM7K_CPU_IRQ_BASE;
+	int i;
+
+	clear_c0_intcontrol(0x00000f00);		/* Mask all */
+
+	for (i = base; i < base + 4; i++)
+		irq_set_chip_and_handler(i, &rm7k_irq_controller,
+					 handle_percpu_irq);
+}
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
new file mode 100644
index 000000000..3c8a18a00
--- /dev/null
+++ b/arch/mips/kernel/irq.c
@@ -0,0 +1,147 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Code to handle x86 style IRQs plus some generic interrupt stuff.
+ *
+ * Copyright (C) 1992 Linus Torvalds
+ * Copyright (C) 1994 - 2000 Ralf Baechle
+ */
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/kallsyms.h>
+#include <linux/kgdb.h>
+#include <linux/ftrace.h>
+
+#include <linux/atomic.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_KGDB
+int kgdb_early_setup;
+#endif
+
+static DECLARE_BITMAP(irq_map, NR_IRQS);
+
+int allocate_irqno(void)
+{
+	int irq;
+
+again:
+	irq = find_first_zero_bit(irq_map, NR_IRQS);
+
+	if (irq >= NR_IRQS)
+		return -ENOSPC;
+
+	if (test_and_set_bit(irq, irq_map))
+		goto again;
+
+	return irq;
+}
+
+/*
+ * Allocate the 16 legacy interrupts for i8259 devices.	 This happens early
+ * in the kernel initialization so treating allocation failure as BUG() is
+ * ok.
+ */
+void __init alloc_legacy_irqno(void)
+{
+	int i;
+
+	for (i = 0; i <= 16; i++)
+		BUG_ON(test_and_set_bit(i, irq_map));
+}
+
+void free_irqno(unsigned int irq)
+{
+	smp_mb__before_atomic();
+	clear_bit(irq, irq_map);
+	smp_mb__after_atomic();
+}
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+	printk("unexpected IRQ # %d\n", irq);
+}
+
+atomic_t irq_err_count;
+
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
+	return 0;
+}
+
+asmlinkage void spurious_interrupt(void)
+{
+	atomic_inc(&irq_err_count);
+}
+
+void __init init_IRQ(void)
+{
+	int i;
+
+#ifdef CONFIG_KGDB
+	if (kgdb_early_setup)
+		return;
+#endif
+
+	for (i = 0; i < NR_IRQS; i++)
+		irq_set_noprobe(i);
+
+	arch_init_irq();
+
+#ifdef CONFIG_KGDB
+	if (!kgdb_early_setup)
+		kgdb_early_setup = 1;
+#endif
+}
+
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+static inline void check_stack_overflow(void)
+{
+	unsigned long sp;
+
+	__asm__ __volatile__("move %0, $sp" : "=r" (sp));
+	sp &= THREAD_MASK;
+
+	/*
+	 * Check for stack overflow: is there less than STACK_WARN free?
+	 * STACK_WARN is defined as 1/8 of THREAD_SIZE by default.
+	 */
+	if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
+		printk("do_IRQ: stack overflow: %ld\n",
+		       sp - sizeof(struct thread_info));
+		dump_stack();
+	}
+}
+#else
+static inline void check_stack_overflow(void) {}
+#endif
+
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+void __irq_entry do_IRQ(unsigned int irq)
+{
+	irq_enter();
+	check_stack_overflow();
+	generic_handle_irq(irq);
+	irq_exit();
+}
+
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
new file mode 100644
index 000000000..6eb7a3f51
--- /dev/null
+++ b/arch/mips/kernel/irq_cpu.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright (C) 2001 Ralf Baechle
+ * Copyright (C) 2005  MIPS Technologies, Inc.	All rights reserved.
+ *	Author: Maciej W. Rozycki <macro@mips.com>
+ *
+ * This file define the irq handler for MIPS CPU interrupts.
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * Almost all MIPS CPUs define 8 interrupt sources.  They are typically
+ * level triggered (i.e., cannot be cleared from CPU; must be cleared from
+ * device).  The first two are software interrupts which we don't really
+ * use or support.  The last one is usually the CPU timer interrupt if
+ * counter register is present or, for CPUs with an external FPU, by
+ * convention it's the FPU exception interrupt.
+ *
+ * Don't even think about using this on SMP.  You have been warned.
+ *
+ * This file exports one global function:
+ *	void mips_cpu_irq_init(void);
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/setup.h>
+
+static inline void unmask_mips_irq(struct irq_data *d)
+{
+	set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+	irq_enable_hazard();
+}
+
+static inline void mask_mips_irq(struct irq_data *d)
+{
+	clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+	irq_disable_hazard();
+}
+
+static struct irq_chip mips_cpu_irq_controller = {
+	.name		= "MIPS",
+	.irq_ack	= mask_mips_irq,
+	.irq_mask	= mask_mips_irq,
+	.irq_mask_ack	= mask_mips_irq,
+	.irq_unmask	= unmask_mips_irq,
+	.irq_eoi	= unmask_mips_irq,
+	.irq_disable	= mask_mips_irq,
+	.irq_enable	= unmask_mips_irq,
+};
+
+/*
+ * Basically the same as above but taking care of all the MT stuff
+ */
+
+static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
+{
+	unsigned int vpflags = dvpe();
+
+	clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+	evpe(vpflags);
+	unmask_mips_irq(d);
+	return 0;
+}
+
+/*
+ * While we ack the interrupt interrupts are disabled and thus we don't need
+ * to deal with concurrency issues.  Same for mips_cpu_irq_end.
+ */
+static void mips_mt_cpu_irq_ack(struct irq_data *d)
+{
+	unsigned int vpflags = dvpe();
+	clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+	evpe(vpflags);
+	mask_mips_irq(d);
+}
+
+static struct irq_chip mips_mt_cpu_irq_controller = {
+	.name		= "MIPS",
+	.irq_startup	= mips_mt_cpu_irq_startup,
+	.irq_ack	= mips_mt_cpu_irq_ack,
+	.irq_mask	= mask_mips_irq,
+	.irq_mask_ack	= mips_mt_cpu_irq_ack,
+	.irq_unmask	= unmask_mips_irq,
+	.irq_eoi	= unmask_mips_irq,
+	.irq_disable	= mask_mips_irq,
+	.irq_enable	= unmask_mips_irq,
+};
+
+asmlinkage void __weak plat_irq_dispatch(void)
+{
+	unsigned long pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int irq;
+
+	if (!pending) {
+		spurious_interrupt();
+		return;
+	}
+
+	pending >>= CAUSEB_IP;
+	while (pending) {
+		irq = fls(pending) - 1;
+		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
+		pending &= ~BIT(irq);
+	}
+}
+
+static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq,
+			     irq_hw_number_t hw)
+{
+	static struct irq_chip *chip;
+
+	if (hw < 2 && cpu_has_mipsmt) {
+		/* Software interrupts are used for MT/CMT IPI */
+		chip = &mips_mt_cpu_irq_controller;
+	} else {
+		chip = &mips_cpu_irq_controller;
+	}
+
+	if (cpu_has_vint)
+		set_vi_handler(hw, plat_irq_dispatch);
+
+	irq_set_chip_and_handler(irq, chip, handle_percpu_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = {
+	.map = mips_cpu_intc_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static void __init __mips_cpu_irq_init(struct device_node *of_node)
+{
+	struct irq_domain *domain;
+
+	/* Mask interrupts. */
+	clear_c0_status(ST0_IM);
+	clear_c0_cause(CAUSEF_IP);
+
+	domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0,
+				       &mips_cpu_intc_irq_domain_ops, NULL);
+	if (!domain)
+		panic("Failed to add irqdomain for MIPS CPU");
+}
+
+void __init mips_cpu_irq_init(void)
+{
+	__mips_cpu_irq_init(NULL);
+}
+
+int __init mips_cpu_irq_of_init(struct device_node *of_node,
+				struct device_node *parent)
+{
+	__mips_cpu_irq_init(of_node);
+	return 0;
+}
diff --git a/arch/mips/kernel/irq_txx9.c b/arch/mips/kernel/irq_txx9.c
new file mode 100644
index 000000000..ab00e4904
--- /dev/null
+++ b/arch/mips/kernel/irq_txx9.c
@@ -0,0 +1,191 @@
+/*
+ * Based on linux/arch/mips/jmr3927/rbhma3100/irq.c,
+ *	    linux/arch/mips/tx4927/common/tx4927_irq.c,
+ *	    linux/arch/mips/tx4938/common/irq.c
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *	   ahennessy@mvista.com
+ *	   source@mvista.com
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <asm/txx9irq.h>
+
+struct txx9_irc_reg {
+	u32 cer;
+	u32 cr[2];
+	u32 unused0;
+	u32 ilr[8];
+	u32 unused1[4];
+	u32 imr;
+	u32 unused2[7];
+	u32 scr;
+	u32 unused3[7];
+	u32 ssr;
+	u32 unused4[7];
+	u32 csr;
+};
+
+/* IRCER : Int. Control Enable */
+#define TXx9_IRCER_ICE	0x00000001
+
+/* IRCR : Int. Control */
+#define TXx9_IRCR_LOW	0x00000000
+#define TXx9_IRCR_HIGH	0x00000001
+#define TXx9_IRCR_DOWN	0x00000002
+#define TXx9_IRCR_UP	0x00000003
+#define TXx9_IRCR_EDGE(cr)	((cr) & 0x00000002)
+
+/* IRSCR : Int. Status Control */
+#define TXx9_IRSCR_EIClrE	0x00000100
+#define TXx9_IRSCR_EIClr_MASK	0x0000000f
+
+/* IRCSR : Int. Current Status */
+#define TXx9_IRCSR_IF	0x00010000
+#define TXx9_IRCSR_ILV_MASK	0x00000700
+#define TXx9_IRCSR_IVL_MASK	0x0000001f
+
+#define irc_dlevel	0
+#define irc_elevel	1
+
+static struct txx9_irc_reg __iomem *txx9_ircptr __read_mostly;
+
+static struct {
+	unsigned char level;
+	unsigned char mode;
+} txx9irq[TXx9_MAX_IR] __read_mostly;
+
+static void txx9_irq_unmask(struct irq_data *d)
+{
+	unsigned int irq_nr = d->irq - TXX9_IRQ_BASE;
+	u32 __iomem *ilrp = &txx9_ircptr->ilr[(irq_nr % 16 ) / 2];
+	int ofs = irq_nr / 16 * 16 + (irq_nr & 1) * 8;
+
+	__raw_writel((__raw_readl(ilrp) & ~(0xff << ofs))
+		     | (txx9irq[irq_nr].level << ofs),
+		     ilrp);
+#ifdef CONFIG_CPU_TX39XX
+	/* update IRCSR */
+	__raw_writel(0, &txx9_ircptr->imr);
+	__raw_writel(irc_elevel, &txx9_ircptr->imr);
+#endif
+}
+
+static inline void txx9_irq_mask(struct irq_data *d)
+{
+	unsigned int irq_nr = d->irq - TXX9_IRQ_BASE;
+	u32 __iomem *ilrp = &txx9_ircptr->ilr[(irq_nr % 16) / 2];
+	int ofs = irq_nr / 16 * 16 + (irq_nr & 1) * 8;
+
+	__raw_writel((__raw_readl(ilrp) & ~(0xff << ofs))
+		     | (irc_dlevel << ofs),
+		     ilrp);
+#ifdef CONFIG_CPU_TX39XX
+	/* update IRCSR */
+	__raw_writel(0, &txx9_ircptr->imr);
+	__raw_writel(irc_elevel, &txx9_ircptr->imr);
+	/* flush write buffer */
+	__raw_readl(&txx9_ircptr->ssr);
+#else
+	mmiowb();
+#endif
+}
+
+static void txx9_irq_mask_ack(struct irq_data *d)
+{
+	unsigned int irq_nr = d->irq - TXX9_IRQ_BASE;
+
+	txx9_irq_mask(d);
+	/* clear edge detection */
+	if (unlikely(TXx9_IRCR_EDGE(txx9irq[irq_nr].mode)))
+		__raw_writel(TXx9_IRSCR_EIClrE | irq_nr, &txx9_ircptr->scr);
+}
+
+static int txx9_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+	unsigned int irq_nr = d->irq - TXX9_IRQ_BASE;
+	u32 cr;
+	u32 __iomem *crp;
+	int ofs;
+	int mode;
+
+	if (flow_type & IRQF_TRIGGER_PROBE)
+		return 0;
+	switch (flow_type & IRQF_TRIGGER_MASK) {
+	case IRQF_TRIGGER_RISING:	mode = TXx9_IRCR_UP;	break;
+	case IRQF_TRIGGER_FALLING:	mode = TXx9_IRCR_DOWN;	break;
+	case IRQF_TRIGGER_HIGH: mode = TXx9_IRCR_HIGH;	break;
+	case IRQF_TRIGGER_LOW:	mode = TXx9_IRCR_LOW;	break;
+	default:
+		return -EINVAL;
+	}
+	crp = &txx9_ircptr->cr[(unsigned int)irq_nr / 8];
+	cr = __raw_readl(crp);
+	ofs = (irq_nr & (8 - 1)) * 2;
+	cr &= ~(0x3 << ofs);
+	cr |= (mode & 0x3) << ofs;
+	__raw_writel(cr, crp);
+	txx9irq[irq_nr].mode = mode;
+	return 0;
+}
+
+static struct irq_chip txx9_irq_chip = {
+	.name		= "TXX9",
+	.irq_ack	= txx9_irq_mask_ack,
+	.irq_mask	= txx9_irq_mask,
+	.irq_mask_ack	= txx9_irq_mask_ack,
+	.irq_unmask	= txx9_irq_unmask,
+	.irq_set_type	= txx9_irq_set_type,
+};
+
+void __init txx9_irq_init(unsigned long baseaddr)
+{
+	int i;
+
+	txx9_ircptr = ioremap(baseaddr, sizeof(struct txx9_irc_reg));
+	for (i = 0; i < TXx9_MAX_IR; i++) {
+		txx9irq[i].level = 4; /* middle level */
+		txx9irq[i].mode = TXx9_IRCR_LOW;
+		irq_set_chip_and_handler(TXX9_IRQ_BASE + i, &txx9_irq_chip,
+					 handle_level_irq);
+	}
+
+	/* mask all IRC interrupts */
+	__raw_writel(0, &txx9_ircptr->imr);
+	for (i = 0; i < 8; i++)
+		__raw_writel(0, &txx9_ircptr->ilr[i]);
+	/* setup IRC interrupt mode (Low Active) */
+	for (i = 0; i < 2; i++)
+		__raw_writel(0, &txx9_ircptr->cr[i]);
+	/* enable interrupt control */
+	__raw_writel(TXx9_IRCER_ICE, &txx9_ircptr->cer);
+	__raw_writel(irc_elevel, &txx9_ircptr->imr);
+}
+
+int __init txx9_irq_set_pri(int irc_irq, int new_pri)
+{
+	int old_pri;
+
+	if ((unsigned int)irc_irq >= TXx9_MAX_IR)
+		return 0;
+	old_pri = txx9irq[irc_irq].level;
+	txx9irq[irc_irq].level = new_pri;
+	return old_pri;
+}
+
+int txx9_irq(void)
+{
+	u32 csr = __raw_readl(&txx9_ircptr->csr);
+
+	if (likely(!(csr & TXx9_IRCSR_IF)))
+		return TXX9_IRQ_BASE + (csr & (TXx9_MAX_IR - 1));
+	return -1;
+}
diff --git a/arch/mips/kernel/jump_label.c b/arch/mips/kernel/jump_label.c
new file mode 100644
index 000000000..dda800e9e
--- /dev/null
+++ b/arch/mips/kernel/jump_label.c
@@ -0,0 +1,76 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2010 Cavium Networks, Inc.
+ */
+
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+#include <linux/cpu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/inst.h>
+
+#ifdef HAVE_JUMP_LABEL
+
+/*
+ * Define parameters for the standard MIPS and the microMIPS jump
+ * instruction encoding respectively:
+ *
+ * - the ISA bit of the target, either 0 or 1 respectively,
+ *
+ * - the amount the jump target address is shifted right to fit in the
+ *   immediate field of the machine instruction, either 2 or 1,
+ *
+ * - the mask determining the size of the jump region relative to the
+ *   delay-slot instruction, either 256MB or 128MB,
+ *
+ * - the jump target alignment, either 4 or 2 bytes.
+ */
+#define J_ISA_BIT	IS_ENABLED(CONFIG_CPU_MICROMIPS)
+#define J_RANGE_SHIFT	(2 - J_ISA_BIT)
+#define J_RANGE_MASK	((1ul << (26 + J_RANGE_SHIFT)) - 1)
+#define J_ALIGN_MASK	((1ul << J_RANGE_SHIFT) - 1)
+
+void arch_jump_label_transform(struct jump_entry *e,
+			       enum jump_label_type type)
+{
+	union mips_instruction *insn_p;
+	union mips_instruction insn;
+
+	insn_p = (union mips_instruction *)msk_isa16_mode(e->code);
+
+	/* Jump only works within an aligned region its delay slot is in. */
+	BUG_ON((e->target & ~J_RANGE_MASK) != ((e->code + 4) & ~J_RANGE_MASK));
+
+	/* Target must have the right alignment and ISA must be preserved. */
+	BUG_ON((e->target & J_ALIGN_MASK) != J_ISA_BIT);
+
+	if (type == JUMP_LABEL_ENABLE) {
+		insn.j_format.opcode = J_ISA_BIT ? mm_j32_op : j_op;
+		insn.j_format.target = e->target >> J_RANGE_SHIFT;
+	} else {
+		insn.word = 0; /* nop */
+	}
+
+	get_online_cpus();
+	mutex_lock(&text_mutex);
+	if (IS_ENABLED(CONFIG_CPU_MICROMIPS)) {
+		insn_p->halfword[0] = insn.word >> 16;
+		insn_p->halfword[1] = insn.word;
+	} else
+		*insn_p = insn;
+
+	flush_icache_range((unsigned long)insn_p,
+			   (unsigned long)insn_p + sizeof(*insn_p));
+
+	mutex_unlock(&text_mutex);
+	put_online_cpus();
+}
+
+#endif /* HAVE_JUMP_LABEL */
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
new file mode 100644
index 000000000..7afcc2f22
--- /dev/null
+++ b/arch/mips/kernel/kgdb.c
@@ -0,0 +1,409 @@
+/*
+ *  Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ *  Contributed by HP Systems
+ *
+ *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ *  Copyright (C) 1995 Andreas Busse
+ *
+ *  Copyright (C) 2003 MontaVista Software Inc.
+ *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ *  Copyright (C) 2004-2005 MontaVista Software Inc.
+ *  Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com
+ *
+ *  Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *  Author/Maintainer: Jason Wessel, jason.wessel@windriver.com
+ *
+ *  This file is licensed under the terms of the GNU General Public License
+ *  version 2. This program is licensed "as is" without any warranty of any
+ *  kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>		/* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <asm/inst.h>
+#include <asm/fpu.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/uaccess.h>
+
+static struct hard_trap_info {
+	unsigned char tt;	/* Trap type code for MIPS R3xxx and R4xxx */
+	unsigned char signo;	/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 6, SIGBUS },		/* instruction bus error */
+	{ 7, SIGBUS },		/* data bus error */
+	{ 9, SIGTRAP },		/* break */
+/*	{ 11, SIGILL }, */	/* CPU unusable */
+	{ 12, SIGFPE },		/* overflow */
+	{ 13, SIGTRAP },	/* trap */
+	{ 14, SIGSEGV },	/* virtual instruction cache coherency */
+	{ 15, SIGFPE },		/* floating point exception */
+	{ 23, SIGSEGV },	/* watch */
+	{ 31, SIGSEGV },	/* virtual data cache coherency */
+	{ 0, 0}			/* Must be last */
+};
+
+struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] =
+{
+	{ "zero", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[0]) },
+	{ "at", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[1]) },
+	{ "v0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[2]) },
+	{ "v1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[3]) },
+	{ "a0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[4]) },
+	{ "a1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[5]) },
+	{ "a2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[6]) },
+	{ "a3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[7]) },
+	{ "t0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[8]) },
+	{ "t1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[9]) },
+	{ "t2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[10]) },
+	{ "t3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[11]) },
+	{ "t4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[12]) },
+	{ "t5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[13]) },
+	{ "t6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[14]) },
+	{ "t7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[15]) },
+	{ "s0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[16]) },
+	{ "s1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[17]) },
+	{ "s2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[18]) },
+	{ "s3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[19]) },
+	{ "s4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[20]) },
+	{ "s5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[21]) },
+	{ "s6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[22]) },
+	{ "s7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[23]) },
+	{ "t8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[24]) },
+	{ "t9", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[25]) },
+	{ "k0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[26]) },
+	{ "k1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[27]) },
+	{ "gp", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[28]) },
+	{ "sp", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[29]) },
+	{ "s8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[30]) },
+	{ "ra", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[31]) },
+	{ "sr", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_status) },
+	{ "lo", GDB_SIZEOF_REG, offsetof(struct pt_regs, lo) },
+	{ "hi", GDB_SIZEOF_REG, offsetof(struct pt_regs, hi) },
+	{ "bad", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_badvaddr) },
+	{ "cause", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_cause) },
+	{ "pc", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_epc) },
+	{ "f0", GDB_SIZEOF_REG, 0 },
+	{ "f1", GDB_SIZEOF_REG, 1 },
+	{ "f2", GDB_SIZEOF_REG, 2 },
+	{ "f3", GDB_SIZEOF_REG, 3 },
+	{ "f4", GDB_SIZEOF_REG, 4 },
+	{ "f5", GDB_SIZEOF_REG, 5 },
+	{ "f6", GDB_SIZEOF_REG, 6 },
+	{ "f7", GDB_SIZEOF_REG, 7 },
+	{ "f8", GDB_SIZEOF_REG, 8 },
+	{ "f9", GDB_SIZEOF_REG, 9 },
+	{ "f10", GDB_SIZEOF_REG, 10 },
+	{ "f11", GDB_SIZEOF_REG, 11 },
+	{ "f12", GDB_SIZEOF_REG, 12 },
+	{ "f13", GDB_SIZEOF_REG, 13 },
+	{ "f14", GDB_SIZEOF_REG, 14 },
+	{ "f15", GDB_SIZEOF_REG, 15 },
+	{ "f16", GDB_SIZEOF_REG, 16 },
+	{ "f17", GDB_SIZEOF_REG, 17 },
+	{ "f18", GDB_SIZEOF_REG, 18 },
+	{ "f19", GDB_SIZEOF_REG, 19 },
+	{ "f20", GDB_SIZEOF_REG, 20 },
+	{ "f21", GDB_SIZEOF_REG, 21 },
+	{ "f22", GDB_SIZEOF_REG, 22 },
+	{ "f23", GDB_SIZEOF_REG, 23 },
+	{ "f24", GDB_SIZEOF_REG, 24 },
+	{ "f25", GDB_SIZEOF_REG, 25 },
+	{ "f26", GDB_SIZEOF_REG, 26 },
+	{ "f27", GDB_SIZEOF_REG, 27 },
+	{ "f28", GDB_SIZEOF_REG, 28 },
+	{ "f29", GDB_SIZEOF_REG, 29 },
+	{ "f30", GDB_SIZEOF_REG, 30 },
+	{ "f31", GDB_SIZEOF_REG, 31 },
+	{ "fsr", GDB_SIZEOF_REG, 0 },
+	{ "fir", GDB_SIZEOF_REG, 0 },
+};
+
+int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	int fp_reg;
+
+	if (regno < 0 || regno >= DBG_MAX_REG_NUM)
+		return -EINVAL;
+
+	if (dbg_reg_def[regno].offset != -1 && regno < 38) {
+		memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
+		       dbg_reg_def[regno].size);
+	} else if (current && dbg_reg_def[regno].offset != -1 && regno < 72) {
+		/* FP registers 38 -> 69 */
+		if (!(regs->cp0_status & ST0_CU1))
+			return 0;
+		if (regno == 70) {
+			/* Process the fcr31/fsr (register 70) */
+			memcpy((void *)&current->thread.fpu.fcr31, mem,
+			       dbg_reg_def[regno].size);
+			goto out_save;
+		} else if (regno == 71) {
+			/* Ignore the fir (register 71) */
+			goto out_save;
+		}
+		fp_reg = dbg_reg_def[regno].offset;
+		memcpy((void *)&current->thread.fpu.fpr[fp_reg], mem,
+		       dbg_reg_def[regno].size);
+out_save:
+		restore_fp(current);
+	}
+
+	return 0;
+}
+
+char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	int fp_reg;
+
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return NULL;
+
+	if (dbg_reg_def[regno].offset != -1 && regno < 38) {
+		/* First 38 registers */
+		memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
+		       dbg_reg_def[regno].size);
+	} else if (current && dbg_reg_def[regno].offset != -1 && regno < 72) {
+		/* FP registers 38 -> 69 */
+		if (!(regs->cp0_status & ST0_CU1))
+			goto out;
+		save_fp(current);
+		if (regno == 70) {
+			/* Process the fcr31/fsr (register 70) */
+			memcpy(mem, (void *)&current->thread.fpu.fcr31,
+			       dbg_reg_def[regno].size);
+			goto out;
+		} else if (regno == 71) {
+			/* Ignore the fir (register 71) */
+			memset(mem, 0, dbg_reg_def[regno].size);
+			goto out;
+		}
+		fp_reg = dbg_reg_def[regno].offset;
+		memcpy(mem, (void *)&current->thread.fpu.fpr[fp_reg],
+		       dbg_reg_def[regno].size);
+	}
+
+out:
+	return dbg_reg_def[regno].name;
+
+}
+
+void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__(
+		".globl breakinst\n\t"
+		".set\tnoreorder\n\t"
+		"nop\n"
+		"breakinst:\tbreak\n\t"
+		"nop\n\t"
+		".set\treorder");
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+	mm_segment_t old_fs;
+
+	old_fs = get_fs();
+	set_fs(get_ds());
+
+	kgdb_nmicallback(raw_smp_processor_id(), NULL);
+
+	set_fs(old_fs);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	local_irq_enable();
+	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
+	local_irq_disable();
+}
+
+static int compute_signal(int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;		/* default for things we don't know about */
+}
+
+/*
+ * Similar to regs_to_gdb_regs() except that process is sleeping and so
+ * we may not be able to get all the info.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	int reg;
+	struct thread_info *ti = task_thread_info(p);
+	unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+	struct pt_regs *regs = (struct pt_regs *)ksp - 1;
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 16; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	/* S0 - S7 */
+	for (reg = 16; reg < 24; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	for (reg = 24; reg < 28; reg++)
+		*(ptr++) = 0;
+
+	/* GP, SP, FP, RA */
+	for (reg = 28; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->cp0_epc = pc;
+}
+
+/*
+ * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
+ * then try to fall into the debugger
+ */
+static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
+			    void *ptr)
+{
+	struct die_args *args = (struct die_args *)ptr;
+	struct pt_regs *regs = args->regs;
+	int trap = (regs->cp0_cause & 0x7c) >> 2;
+	mm_segment_t old_fs;
+
+#ifdef CONFIG_KPROBES
+	/*
+	 * Return immediately if the kprobes fault notifier has set
+	 * DIE_PAGE_FAULT.
+	 */
+	if (cmd == DIE_PAGE_FAULT)
+		return NOTIFY_DONE;
+#endif /* CONFIG_KPROBES */
+
+	/* Userspace events, ignore. */
+	if (user_mode(regs))
+		return NOTIFY_DONE;
+
+	/* Kernel mode. Set correct address limit */
+	old_fs = get_fs();
+	set_fs(get_ds());
+
+	if (atomic_read(&kgdb_active) != -1)
+		kgdb_nmicallback(smp_processor_id(), regs);
+
+	if (kgdb_handle_exception(trap, compute_signal(trap), cmd, regs)) {
+		set_fs(old_fs);
+		return NOTIFY_DONE;
+	}
+
+	if (atomic_read(&kgdb_setting_breakpoint))
+		if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst))
+			regs->cp0_epc += 4;
+
+	/* In SMP mode, __flush_cache_all does IPI */
+	local_irq_enable();
+	__flush_cache_all();
+
+	set_fs(old_fs);
+	return NOTIFY_STOP;
+}
+
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+int kgdb_ll_trap(int cmd, const char *str,
+		 struct pt_regs *regs, long err, int trap, int sig)
+{
+	struct die_args args = {
+		.regs	= regs,
+		.str	= str,
+		.err	= err,
+		.trapnr = trap,
+		.signr	= sig,
+
+	};
+
+	if (!kgdb_io_module_registered)
+		return NOTIFY_DONE;
+
+	return kgdb_mips_notify(NULL, cmd, &args);
+}
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call = kgdb_mips_notify,
+};
+
+/*
+ * Handle the 'c' command
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	char *ptr;
+	unsigned long address;
+
+	switch (remcom_in_buffer[0]) {
+	case 'c':
+		/* handle the optional parameter */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &address))
+			regs->cp0_epc = address;
+
+		return 0;
+	}
+
+	return -1;
+}
+
+struct kgdb_arch arch_kgdb_ops;
+
+/*
+ * We use kgdb_early_setup so that functions we need to call now don't
+ * cause trouble when called again later.
+ */
+int kgdb_arch_init(void)
+{
+	union mips_instruction insn = {
+		.r_format = {
+			.opcode = spec_op,
+			.func	= break_op,
+		}
+	};
+	memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE);
+
+	register_die_notifier(&kgdb_notifier);
+
+	return 0;
+}
+
+/*
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_die_notifier(&kgdb_notifier);
+}
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
new file mode 100644
index 000000000..212f46f20
--- /dev/null
+++ b/arch/mips/kernel/kprobes.c
@@ -0,0 +1,679 @@
+/*
+ *  Kernel Probes (KProbes)
+ *  arch/mips/kernel/kprobes.c
+ *
+ *  Copyright 2006 Sony Corp.
+ *  Copyright 2010 Cavium Networks
+ *
+ *  Some portions copied from the powerpc version.
+ *
+ *   Copyright (C) IBM Corporation, 2002, 2004
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kprobes.h>
+#include <linux/preempt.h>
+#include <linux/uaccess.h>
+#include <linux/kdebug.h>
+#include <linux/slab.h>
+
+#include <asm/ptrace.h>
+#include <asm/branch.h>
+#include <asm/break.h>
+#include <asm/inst.h>
+
+static const union mips_instruction breakpoint_insn = {
+	.b_format = {
+		.opcode = spec_op,
+		.code = BRK_KPROBE_BP,
+		.func = break_op
+	}
+};
+
+static const union mips_instruction breakpoint2_insn = {
+	.b_format = {
+		.opcode = spec_op,
+		.code = BRK_KPROBE_SSTEPBP,
+		.func = break_op
+	}
+};
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe);
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+static int __kprobes insn_has_delayslot(union mips_instruction insn)
+{
+	switch (insn.i_format.opcode) {
+
+		/*
+		 * This group contains:
+		 * jr and jalr are in r_format format.
+		 */
+	case spec_op:
+		switch (insn.r_format.func) {
+		case jr_op:
+		case jalr_op:
+			break;
+		default:
+			goto insn_ok;
+		}
+
+		/*
+		 * This group contains:
+		 * bltz_op, bgez_op, bltzl_op, bgezl_op,
+		 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
+		 */
+	case bcond_op:
+
+		/*
+		 * These are unconditional and in j_format.
+		 */
+	case jal_op:
+	case j_op:
+
+		/*
+		 * These are conditional and in i_format.
+		 */
+	case beq_op:
+	case beql_op:
+	case bne_op:
+	case bnel_op:
+	case blez_op:
+	case blezl_op:
+	case bgtz_op:
+	case bgtzl_op:
+
+		/*
+		 * These are the FPA/cp1 branch instructions.
+		 */
+	case cop1_op:
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	case lwc2_op: /* This is bbit0 on Octeon */
+	case ldc2_op: /* This is bbit032 on Octeon */
+	case swc2_op: /* This is bbit1 on Octeon */
+	case sdc2_op: /* This is bbit132 on Octeon */
+#endif
+		return 1;
+	default:
+		break;
+	}
+insn_ok:
+	return 0;
+}
+
+/*
+ * insn_has_ll_or_sc function checks whether instruction is ll or sc
+ * one; putting breakpoint on top of atomic ll/sc pair is bad idea;
+ * so we need to prevent it and refuse kprobes insertion for such
+ * instructions; cannot do much about breakpoint in the middle of
+ * ll/sc pair; it is upto user to avoid those places
+ */
+static int __kprobes insn_has_ll_or_sc(union mips_instruction insn)
+{
+	int ret = 0;
+
+	switch (insn.i_format.opcode) {
+	case ll_op:
+	case lld_op:
+	case sc_op:
+	case scd_op:
+		ret = 1;
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	union mips_instruction insn;
+	union mips_instruction prev_insn;
+	int ret = 0;
+
+	insn = p->addr[0];
+
+	if (insn_has_ll_or_sc(insn)) {
+		pr_notice("Kprobes for ll and sc instructions are not"
+			  "supported\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if ((probe_kernel_read(&prev_insn, p->addr - 1,
+				sizeof(mips_instruction)) == 0) &&
+				insn_has_delayslot(prev_insn)) {
+		pr_notice("Kprobes for branch delayslot are not supported\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* insn: must be on special executable page on mips. */
+	p->ainsn.insn = get_insn_slot();
+	if (!p->ainsn.insn) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/*
+	 * In the kprobe->ainsn.insn[] array we store the original
+	 * instruction at index zero and a break trap instruction at
+	 * index one.
+	 *
+	 * On MIPS arch if the instruction at probed address is a
+	 * branch instruction, we need to execute the instruction at
+	 * Branch Delayslot (BD) at the time of probe hit. As MIPS also
+	 * doesn't have single stepping support, the BD instruction can
+	 * not be executed in-line and it would be executed on SSOL slot
+	 * using a normal breakpoint instruction in the next slot.
+	 * So, read the instruction and save it for later execution.
+	 */
+	if (insn_has_delayslot(insn))
+		memcpy(&p->ainsn.insn[0], p->addr + 1, sizeof(kprobe_opcode_t));
+	else
+		memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t));
+
+	p->ainsn.insn[1] = breakpoint2_insn;
+	p->opcode = *p->addr;
+
+out:
+	return ret;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+	*p->addr = breakpoint_insn;
+	flush_insn_slot(p);
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+	*p->addr = p->opcode;
+	flush_insn_slot(p);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+	if (p->ainsn.insn) {
+		free_insn_slot(p->ainsn.insn, 0);
+		p->ainsn.insn = NULL;
+	}
+}
+
+static void save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+	kcb->prev_kprobe.old_SR = kcb->kprobe_old_SR;
+	kcb->prev_kprobe.saved_SR = kcb->kprobe_saved_SR;
+	kcb->prev_kprobe.saved_epc = kcb->kprobe_saved_epc;
+}
+
+static void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+	kcb->kprobe_old_SR = kcb->prev_kprobe.old_SR;
+	kcb->kprobe_saved_SR = kcb->prev_kprobe.saved_SR;
+	kcb->kprobe_saved_epc = kcb->prev_kprobe.saved_epc;
+}
+
+static void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+			       struct kprobe_ctlblk *kcb)
+{
+	__this_cpu_write(current_kprobe, p);
+	kcb->kprobe_saved_SR = kcb->kprobe_old_SR = (regs->cp0_status & ST0_IE);
+	kcb->kprobe_saved_epc = regs->cp0_epc;
+}
+
+/**
+ * evaluate_branch_instrucion -
+ *
+ * Evaluate the branch instruction at probed address during probe hit. The
+ * result of evaluation would be the updated epc. The insturction in delayslot
+ * would actually be single stepped using a normal breakpoint) on SSOL slot.
+ *
+ * The result is also saved in the kprobe control block for later use,
+ * in case we need to execute the delayslot instruction. The latter will be
+ * false for NOP instruction in dealyslot and the branch-likely instructions
+ * when the branch is taken. And for those cases we set a flag as
+ * SKIP_DELAYSLOT in the kprobe control block
+ */
+static int evaluate_branch_instruction(struct kprobe *p, struct pt_regs *regs,
+					struct kprobe_ctlblk *kcb)
+{
+	union mips_instruction insn = p->opcode;
+	long epc;
+	int ret = 0;
+
+	epc = regs->cp0_epc;
+	if (epc & 3)
+		goto unaligned;
+
+	if (p->ainsn.insn->word == 0)
+		kcb->flags |= SKIP_DELAYSLOT;
+	else
+		kcb->flags &= ~SKIP_DELAYSLOT;
+
+	ret = __compute_return_epc_for_insn(regs, insn);
+	if (ret < 0)
+		return ret;
+
+	if (ret == BRANCH_LIKELY_TAKEN)
+		kcb->flags |= SKIP_DELAYSLOT;
+
+	kcb->target_epc = regs->cp0_epc;
+
+	return 0;
+
+unaligned:
+	pr_notice("%s: unaligned epc - sending SIGBUS.\n", current->comm);
+	force_sig(SIGBUS, current);
+	return -EFAULT;
+
+}
+
+static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs,
+						struct kprobe_ctlblk *kcb)
+{
+	int ret = 0;
+
+	regs->cp0_status &= ~ST0_IE;
+
+	/* single step inline if the instruction is a break */
+	if (p->opcode.word == breakpoint_insn.word ||
+	    p->opcode.word == breakpoint2_insn.word)
+		regs->cp0_epc = (unsigned long)p->addr;
+	else if (insn_has_delayslot(p->opcode)) {
+		ret = evaluate_branch_instruction(p, regs, kcb);
+		if (ret < 0) {
+			pr_notice("Kprobes: Error in evaluating branch\n");
+			return;
+		}
+	}
+	regs->cp0_epc = (unsigned long)&p->ainsn.insn[0];
+}
+
+/*
+ * Called after single-stepping.  p->addr is the address of the
+ * instruction whose first byte has been replaced by the "break 0"
+ * instruction.	 To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction.  The address of this
+ * copy is p->ainsn.insn.
+ *
+ * This function prepares to return from the post-single-step
+ * breakpoint trap. In case of branch instructions, the target
+ * epc to be restored.
+ */
+static void __kprobes resume_execution(struct kprobe *p,
+				       struct pt_regs *regs,
+				       struct kprobe_ctlblk *kcb)
+{
+	if (insn_has_delayslot(p->opcode))
+		regs->cp0_epc = kcb->target_epc;
+	else {
+		unsigned long orig_epc = kcb->kprobe_saved_epc;
+		regs->cp0_epc = orig_epc + 4;
+	}
+}
+
+static int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *p;
+	int ret = 0;
+	kprobe_opcode_t *addr;
+	struct kprobe_ctlblk *kcb;
+
+	addr = (kprobe_opcode_t *) regs->cp0_epc;
+
+	/*
+	 * We don't want to be preempted for the entire
+	 * duration of kprobe processing
+	 */
+	preempt_disable();
+	kcb = get_kprobe_ctlblk();
+
+	/* Check we're not actually recursing */
+	if (kprobe_running()) {
+		p = get_kprobe(addr);
+		if (p) {
+			if (kcb->kprobe_status == KPROBE_HIT_SS &&
+			    p->ainsn.insn->word == breakpoint_insn.word) {
+				regs->cp0_status &= ~ST0_IE;
+				regs->cp0_status |= kcb->kprobe_saved_SR;
+				goto no_kprobe;
+			}
+			/*
+			 * We have reentered the kprobe_handler(), since
+			 * another probe was hit while within the handler.
+			 * We here save the original kprobes variables and
+			 * just single step on the instruction of the new probe
+			 * without calling any user handlers.
+			 */
+			save_previous_kprobe(kcb);
+			set_current_kprobe(p, regs, kcb);
+			kprobes_inc_nmissed_count(p);
+			prepare_singlestep(p, regs, kcb);
+			kcb->kprobe_status = KPROBE_REENTER;
+			if (kcb->flags & SKIP_DELAYSLOT) {
+				resume_execution(p, regs, kcb);
+				restore_previous_kprobe(kcb);
+				preempt_enable_no_resched();
+			}
+			return 1;
+		} else {
+			if (addr->word != breakpoint_insn.word) {
+				/*
+				 * The breakpoint instruction was removed by
+				 * another cpu right after we hit, no further
+				 * handling of this interrupt is appropriate
+				 */
+				ret = 1;
+				goto no_kprobe;
+			}
+			p = __this_cpu_read(current_kprobe);
+			if (p->break_handler && p->break_handler(p, regs))
+				goto ss_probe;
+		}
+		goto no_kprobe;
+	}
+
+	p = get_kprobe(addr);
+	if (!p) {
+		if (addr->word != breakpoint_insn.word) {
+			/*
+			 * The breakpoint instruction was removed right
+			 * after we hit it.  Another cpu has removed
+			 * either a probepoint or a debugger breakpoint
+			 * at this address.  In either case, no further
+			 * handling of this interrupt is appropriate.
+			 */
+			ret = 1;
+		}
+		/* Not one of ours: let kernel handle it */
+		goto no_kprobe;
+	}
+
+	set_current_kprobe(p, regs, kcb);
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+	if (p->pre_handler && p->pre_handler(p, regs)) {
+		/* handler has already set things up, so skip ss setup */
+		return 1;
+	}
+
+ss_probe:
+	prepare_singlestep(p, regs, kcb);
+	if (kcb->flags & SKIP_DELAYSLOT) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		if (p->post_handler)
+			p->post_handler(p, regs, 0);
+		resume_execution(p, regs, kcb);
+		preempt_enable_no_resched();
+	} else
+		kcb->kprobe_status = KPROBE_HIT_SS;
+
+	return 1;
+
+no_kprobe:
+	preempt_enable_no_resched();
+	return ret;
+
+}
+
+static inline int post_kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (!cur)
+		return 0;
+
+	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
+	}
+
+	resume_execution(cur, regs, kcb);
+
+	regs->cp0_status |= kcb->kprobe_saved_SR;
+
+	/* Restore back the original saved kprobes variables and continue. */
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
+		goto out;
+	}
+	reset_current_kprobe();
+out:
+	preempt_enable_no_resched();
+
+	return 1;
+}
+
+static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+		return 1;
+
+	if (kcb->kprobe_status & KPROBE_HIT_SS) {
+		resume_execution(cur, regs, kcb);
+		regs->cp0_status |= kcb->kprobe_old_SR;
+
+		reset_current_kprobe();
+		preempt_enable_no_resched();
+	}
+	return 0;
+}
+
+/*
+ * Wrapper routine for handling exceptions.
+ */
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+				       unsigned long val, void *data)
+{
+
+	struct die_args *args = (struct die_args *)data;
+	int ret = NOTIFY_DONE;
+
+	switch (val) {
+	case DIE_BREAK:
+		if (kprobe_handler(args->regs))
+			ret = NOTIFY_STOP;
+		break;
+	case DIE_SSTEPBP:
+		if (post_kprobe_handler(args->regs))
+			ret = NOTIFY_STOP;
+		break;
+
+	case DIE_PAGE_FAULT:
+		/* kprobe_running() needs smp_processor_id() */
+		preempt_disable();
+
+		if (kprobe_running()
+		    && kprobe_fault_handler(args->regs, args->trapnr))
+			ret = NOTIFY_STOP;
+		preempt_enable();
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct jprobe *jp = container_of(p, struct jprobe, kp);
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	kcb->jprobe_saved_regs = *regs;
+	kcb->jprobe_saved_sp = regs->regs[29];
+
+	memcpy(kcb->jprobes_stack, (void *)kcb->jprobe_saved_sp,
+	       MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp));
+
+	regs->cp0_epc = (unsigned long)(jp->entry);
+
+	return 1;
+}
+
+/* Defined in the inline asm below. */
+void jprobe_return_end(void);
+
+void __kprobes jprobe_return(void)
+{
+	/* Assembler quirk necessitates this '0,code' business.	 */
+	asm volatile(
+		"break 0,%0\n\t"
+		".globl jprobe_return_end\n"
+		"jprobe_return_end:\n"
+		: : "n" (BRK_KPROBE_BP) : "memory");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (regs->cp0_epc >= (unsigned long)jprobe_return &&
+	    regs->cp0_epc <= (unsigned long)jprobe_return_end) {
+		*regs = kcb->jprobe_saved_regs;
+		memcpy((void *)kcb->jprobe_saved_sp, kcb->jprobes_stack,
+		       MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp));
+		preempt_enable_no_resched();
+
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * Function return probe trampoline:
+ *	- init_kprobes() establishes a probepoint here
+ *	- When the probed function returns, this probe causes the
+ *	  handlers to fire
+ */
+static void __used kretprobe_trampoline_holder(void)
+{
+	asm volatile(
+		".set push\n\t"
+		/* Keep the assembler from reordering and placing JR here. */
+		".set noreorder\n\t"
+		"nop\n\t"
+		".global kretprobe_trampoline\n"
+		"kretprobe_trampoline:\n\t"
+		"nop\n\t"
+		".set pop"
+		: : : "memory");
+}
+
+void kretprobe_trampoline(void);
+
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+				      struct pt_regs *regs)
+{
+	ri->ret_addr = (kprobe_opcode_t *) regs->regs[31];
+
+	/* Replace the return addr with trampoline addr */
+	regs->regs[31] = (unsigned long)kretprobe_trampoline;
+}
+
+/*
+ * Called when the probe at kretprobe trampoline is hit
+ */
+static int __kprobes trampoline_probe_handler(struct kprobe *p,
+						struct pt_regs *regs)
+{
+	struct kretprobe_instance *ri = NULL;
+	struct hlist_head *head, empty_rp;
+	struct hlist_node *tmp;
+	unsigned long flags, orig_ret_address = 0;
+	unsigned long trampoline_address = (unsigned long)kretprobe_trampoline;
+
+	INIT_HLIST_HEAD(&empty_rp);
+	kretprobe_hash_lock(current, &head, &flags);
+
+	/*
+	 * It is possible to have multiple instances associated with a given
+	 * task either because an multiple functions in the call path
+	 * have a return probe installed on them, and/or more than one return
+	 * return probe was registered for a target function.
+	 *
+	 * We can handle this because:
+	 *     - instances are always inserted at the head of the list
+	 *     - when multiple return probes are registered for the same
+	 *	 function, the first instance's ret_addr will point to the
+	 *	 real return address, and all the rest will point to
+	 *	 kretprobe_trampoline
+	 */
+	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
+
+		if (ri->rp && ri->rp->handler)
+			ri->rp->handler(ri, regs);
+
+		orig_ret_address = (unsigned long)ri->ret_addr;
+		recycle_rp_inst(ri, &empty_rp);
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+	instruction_pointer(regs) = orig_ret_address;
+
+	reset_current_kprobe();
+	kretprobe_hash_unlock(current, &flags);
+	preempt_enable_no_resched();
+
+	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
+		hlist_del(&ri->hlist);
+		kfree(ri);
+	}
+	/*
+	 * By returning a non-zero value, we are telling
+	 * kprobe_handler() that we don't want the post_handler
+	 * to run (and have re-enabled preemption)
+	 */
+	return 1;
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	if (p->addr == (kprobe_opcode_t *)kretprobe_trampoline)
+		return 1;
+
+	return 0;
+}
+
+static struct kprobe trampoline_p = {
+	.addr = (kprobe_opcode_t *)kretprobe_trampoline,
+	.pre_handler = trampoline_probe_handler
+};
+
+int __init arch_init_kprobes(void)
+{
+	return register_kprobe(&trampoline_p);
+}
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
new file mode 100644
index 000000000..0b29646bc
--- /dev/null
+++ b/arch/mips/kernel/linux32.c
@@ -0,0 +1,167 @@
+/*
+ * Conversion between 32-bit and 64-bit native system calls.
+ *
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Written by Ulf Carlsson (ulfc@engr.sgi.com)
+ */
+#include <linux/compiler.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/file.h>
+#include <linux/highuid.h>
+#include <linux/resource.h>
+#include <linux/highmem.h>
+#include <linux/time.h>
+#include <linux/times.h>
+#include <linux/poll.h>
+#include <linux/skbuff.h>
+#include <linux/filter.h>
+#include <linux/shm.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/icmpv6.h>
+#include <linux/syscalls.h>
+#include <linux/sysctl.h>
+#include <linux/utime.h>
+#include <linux/utsname.h>
+#include <linux/personality.h>
+#include <linux/dnotify.h>
+#include <linux/module.h>
+#include <linux/binfmts.h>
+#include <linux/security.h>
+#include <linux/compat.h>
+#include <linux/vfs.h>
+#include <linux/ipc.h>
+#include <linux/slab.h>
+
+#include <net/sock.h>
+#include <net/scm.h>
+
+#include <asm/compat-signal.h>
+#include <asm/sim.h>
+#include <asm/uaccess.h>
+#include <asm/mmu_context.h>
+#include <asm/mman.h>
+
+/* Use this to get at 32-bit user passed pointers. */
+/* A() macro should be used for places where you e.g.
+   have some internal variable u32 and just want to get
+   rid of a compiler warning. AA() has to be used in
+   places where you want to convert a function argument
+   to 32bit pointer or when you e.g. access pt_regs
+   structure and want to consider 32bit registers only.
+ */
+#define A(__x) ((unsigned long)(__x))
+#define AA(__x) ((unsigned long)((int)__x))
+
+#ifdef __MIPSEB__
+#define merge_64(r1, r2) ((((r1) & 0xffffffffUL) << 32) + ((r2) & 0xffffffffUL))
+#endif
+#ifdef __MIPSEL__
+#define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL))
+#endif
+
+SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len,
+	unsigned long, prot, unsigned long, flags, unsigned long, fd,
+	unsigned long, pgoff)
+{
+	unsigned long error;
+
+	error = -EINVAL;
+	if (pgoff & (~PAGE_MASK >> 12))
+		goto out;
+	error = sys_mmap_pgoff(addr, len, prot, flags, fd,
+			       pgoff >> (PAGE_SHIFT-12));
+out:
+	return error;
+}
+
+#define RLIM_INFINITY32 0x7fffffff
+#define RESOURCE32(x) ((x > RLIM_INFINITY32) ? RLIM_INFINITY32 : x)
+
+struct rlimit32 {
+	int	rlim_cur;
+	int	rlim_max;
+};
+
+SYSCALL_DEFINE4(32_truncate64, const char __user *, path,
+	unsigned long, __dummy, unsigned long, a2, unsigned long, a3)
+{
+	return sys_truncate(path, merge_64(a2, a3));
+}
+
+SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy,
+	unsigned long, a2, unsigned long, a3)
+{
+	return sys_ftruncate(fd, merge_64(a2, a3));
+}
+
+SYSCALL_DEFINE5(32_llseek, unsigned int, fd, unsigned int, offset_high,
+		unsigned int, offset_low, loff_t __user *, result,
+		unsigned int, origin)
+{
+	return sys_llseek(fd, offset_high, offset_low, result, origin);
+}
+
+/* From the Single Unix Spec: pread & pwrite act like lseek to pos + op +
+   lseek back to original location.  They fail just like lseek does on
+   non-seekable files.	*/
+
+SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count,
+	unsigned long, unused, unsigned long, a4, unsigned long, a5)
+{
+	return sys_pread64(fd, buf, count, merge_64(a4, a5));
+}
+
+SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf,
+	size_t, count, u32, unused, u64, a4, u64, a5)
+{
+	return sys_pwrite64(fd, buf, count, merge_64(a4, a5));
+}
+
+SYSCALL_DEFINE1(32_personality, unsigned long, personality)
+{
+	unsigned int p = personality & 0xffffffff;
+	int ret;
+
+	if (personality(current->personality) == PER_LINUX32 &&
+	    personality(p) == PER_LINUX)
+		p = (p & ~PER_MASK) | PER_LINUX32;
+	ret = sys_personality(p);
+	if (ret != -1 && personality(ret) == PER_LINUX32)
+		ret = (ret & ~PER_MASK) | PER_LINUX;
+	return ret;
+}
+
+asmlinkage ssize_t sys32_readahead(int fd, u32 pad0, u64 a2, u64 a3,
+				   size_t count)
+{
+	return sys_readahead(fd, merge_64(a2, a3), count);
+}
+
+asmlinkage long sys32_sync_file_range(int fd, int __pad,
+	unsigned long a2, unsigned long a3,
+	unsigned long a4, unsigned long a5,
+	int flags)
+{
+	return sys_sync_file_range(fd,
+			merge_64(a2, a3), merge_64(a4, a5),
+			flags);
+}
+
+asmlinkage long sys32_fadvise64_64(int fd, int __pad,
+	unsigned long a2, unsigned long a3,
+	unsigned long a4, unsigned long a5,
+	int flags)
+{
+	return sys_fadvise64_64(fd,
+			merge_64(a2, a3), merge_64(a4, a5),
+			flags);
+}
+
+asmlinkage long sys32_fallocate(int fd, int mode, unsigned offset_a2,
+	unsigned offset_a3, unsigned len_a4, unsigned len_a5)
+{
+	return sys_fallocate(fd, mode, merge_64(offset_a2, offset_a3),
+			     merge_64(len_a4, len_a5));
+}
diff --git a/arch/mips/kernel/machine_kexec.c b/arch/mips/kernel/machine_kexec.c
new file mode 100644
index 000000000..50980bf39
--- /dev/null
+++ b/arch/mips/kernel/machine_kexec.c
@@ -0,0 +1,114 @@
+/*
+ * machine_kexec.c for kexec
+ * Created by <nschichan@corp.free.fr> on Thu Oct 12 15:15:06 2006
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+#include <linux/compiler.h>
+#include <linux/kexec.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+
+extern const unsigned char relocate_new_kernel[];
+extern const size_t relocate_new_kernel_size;
+
+extern unsigned long kexec_start_address;
+extern unsigned long kexec_indirection_page;
+
+int (*_machine_kexec_prepare)(struct kimage *) = NULL;
+void (*_machine_kexec_shutdown)(void) = NULL;
+void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
+#ifdef CONFIG_SMP
+void (*relocated_kexec_smp_wait) (void *);
+atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
+#endif
+
+int
+machine_kexec_prepare(struct kimage *kimage)
+{
+	if (_machine_kexec_prepare)
+		return _machine_kexec_prepare(kimage);
+	return 0;
+}
+
+void
+machine_kexec_cleanup(struct kimage *kimage)
+{
+}
+
+void
+machine_shutdown(void)
+{
+	if (_machine_kexec_shutdown)
+		_machine_kexec_shutdown();
+}
+
+void
+machine_crash_shutdown(struct pt_regs *regs)
+{
+	if (_machine_crash_shutdown)
+		_machine_crash_shutdown(regs);
+	else
+		default_machine_crash_shutdown(regs);
+}
+
+typedef void (*noretfun_t)(void) __noreturn;
+
+void
+machine_kexec(struct kimage *image)
+{
+	unsigned long reboot_code_buffer;
+	unsigned long entry;
+	unsigned long *ptr;
+
+	reboot_code_buffer =
+	  (unsigned long)page_address(image->control_code_page);
+
+	kexec_start_address =
+		(unsigned long) phys_to_virt(image->start);
+
+	if (image->type == KEXEC_TYPE_DEFAULT) {
+		kexec_indirection_page =
+			(unsigned long) phys_to_virt(image->head & PAGE_MASK);
+	} else {
+		kexec_indirection_page = (unsigned long)&image->head;
+	}
+
+	memcpy((void*)reboot_code_buffer, relocate_new_kernel,
+	       relocate_new_kernel_size);
+
+	/*
+	 * The generic kexec code builds a page list with physical
+	 * addresses. they are directly accessible through KSEG0 (or
+	 * CKSEG0 or XPHYS if on 64bit system), hence the
+	 * phys_to_virt() call.
+	 */
+	for (ptr = &image->head; (entry = *ptr) && !(entry &IND_DONE);
+	     ptr = (entry & IND_INDIRECTION) ?
+	       phys_to_virt(entry & PAGE_MASK) : ptr + 1) {
+		if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
+		    *ptr & IND_DESTINATION)
+			*ptr = (unsigned long) phys_to_virt(*ptr);
+	}
+
+	/*
+	 * we do not want to be bothered.
+	 */
+	local_irq_disable();
+
+	printk("Will call new kernel at %08lx\n", image->start);
+	printk("Bye ...\n");
+	__flush_cache_all();
+#ifdef CONFIG_SMP
+	/* All secondary cpus now may jump to kexec_wait cycle */
+	relocated_kexec_smp_wait = reboot_code_buffer +
+		(void *)(kexec_smp_wait - relocate_new_kernel);
+	smp_wmb();
+	atomic_set(&kexec_ready_to_reboot, 1);
+#endif
+	((noretfun_t) reboot_code_buffer)();
+}
diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
new file mode 100644
index 000000000..2f7c73477
--- /dev/null
+++ b/arch/mips/kernel/mcount.S
@@ -0,0 +1,220 @@
+/*
+ * MIPS specific _mcount support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive for
+ * more details.
+ *
+ * Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China
+ * Copyright (C) 2010 DSLab, Lanzhou University, China
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ */
+
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/ftrace.h>
+
+	.text
+	.set noreorder
+	.set noat
+
+	.macro MCOUNT_SAVE_REGS
+	PTR_SUBU	sp, PT_SIZE
+	PTR_S	ra, PT_R31(sp)
+	PTR_S	AT, PT_R1(sp)
+	PTR_S	a0, PT_R4(sp)
+	PTR_S	a1, PT_R5(sp)
+	PTR_S	a2, PT_R6(sp)
+	PTR_S	a3, PT_R7(sp)
+#ifdef CONFIG_64BIT
+	PTR_S	a4, PT_R8(sp)
+	PTR_S	a5, PT_R9(sp)
+	PTR_S	a6, PT_R10(sp)
+	PTR_S	a7, PT_R11(sp)
+#endif
+	.endm
+
+	.macro MCOUNT_RESTORE_REGS
+	PTR_L	ra, PT_R31(sp)
+	PTR_L	AT, PT_R1(sp)
+	PTR_L	a0, PT_R4(sp)
+	PTR_L	a1, PT_R5(sp)
+	PTR_L	a2, PT_R6(sp)
+	PTR_L	a3, PT_R7(sp)
+#ifdef CONFIG_64BIT
+	PTR_L	a4, PT_R8(sp)
+	PTR_L	a5, PT_R9(sp)
+	PTR_L	a6, PT_R10(sp)
+	PTR_L	a7, PT_R11(sp)
+#endif
+	PTR_ADDIU	sp, PT_SIZE
+	.endm
+
+	.macro RETURN_BACK
+	jr ra
+	 move ra, AT
+	.endm
+
+/*
+ * The -mmcount-ra-address option of gcc 4.5 uses register $12 to pass
+ * the location of the parent's return address.
+ */
+#define MCOUNT_RA_ADDRESS_REG	$12
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+NESTED(ftrace_caller, PT_SIZE, ra)
+	.globl _mcount
+_mcount:
+	b	ftrace_stub
+#ifdef CONFIG_32BIT
+	 addiu sp,sp,8
+#else
+	 nop
+#endif
+
+	/* When tracing is activated, it calls ftrace_caller+8 (aka here) */
+	MCOUNT_SAVE_REGS
+#ifdef KBUILD_MCOUNT_RA_ADDRESS
+	PTR_S	MCOUNT_RA_ADDRESS_REG, PT_R12(sp)
+#endif
+
+	PTR_SUBU a0, ra, 8	/* arg1: self address */
+	PTR_LA   t1, _stext
+	sltu     t2, a0, t1	/* t2 = (a0 < _stext) */
+	PTR_LA   t1, _etext
+	sltu     t3, t1, a0	/* t3 = (a0 > _etext) */
+	or       t1, t2, t3
+	beqz     t1, ftrace_call
+	 nop
+#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
+	PTR_SUBU a0, a0, 16	/* arg1: adjust to module's recorded callsite */
+#else
+	PTR_SUBU a0, a0, 12
+#endif
+
+	.globl ftrace_call
+ftrace_call:
+	nop	/* a placeholder for the call to a real tracing function */
+	 move	a1, AT		/* arg2: parent's return address */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl ftrace_graph_call
+ftrace_graph_call:
+	nop
+	 nop
+#endif
+
+	MCOUNT_RESTORE_REGS
+	.globl ftrace_stub
+ftrace_stub:
+	RETURN_BACK
+	END(ftrace_caller)
+
+#else	/* ! CONFIG_DYNAMIC_FTRACE */
+
+NESTED(_mcount, PT_SIZE, ra)
+	PTR_LA	t1, ftrace_stub
+	PTR_L	t2, ftrace_trace_function /* Prepare t2 for (1) */
+	bne	t1, t2, static_trace
+	 nop
+
+#ifdef	CONFIG_FUNCTION_GRAPH_TRACER
+	PTR_L	t3, ftrace_graph_return
+	bne	t1, t3, ftrace_graph_caller
+	 nop
+	PTR_LA	t1, ftrace_graph_entry_stub
+	PTR_L	t3, ftrace_graph_entry
+	bne	t1, t3, ftrace_graph_caller
+	 nop
+#endif
+	b	ftrace_stub
+#ifdef CONFIG_32BIT
+	 addiu sp, sp, 8
+#else
+	 nop
+#endif
+
+static_trace:
+	MCOUNT_SAVE_REGS
+
+	move	a0, ra		/* arg1: self return address */
+	jalr	t2		/* (1) call *ftrace_trace_function */
+	 move	a1, AT		/* arg2: parent's return address */
+
+	MCOUNT_RESTORE_REGS
+#ifdef CONFIG_32BIT
+	addiu sp, sp, 8
+#endif
+	.globl ftrace_stub
+ftrace_stub:
+	RETURN_BACK
+	END(_mcount)
+
+#endif	/* ! CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+NESTED(ftrace_graph_caller, PT_SIZE, ra)
+#ifndef CONFIG_DYNAMIC_FTRACE
+	MCOUNT_SAVE_REGS
+#endif
+
+	/* arg1: Get the location of the parent's return address */
+#ifdef KBUILD_MCOUNT_RA_ADDRESS
+#ifdef CONFIG_DYNAMIC_FTRACE
+	PTR_L	a0, PT_R12(sp)
+#else
+	move	a0, MCOUNT_RA_ADDRESS_REG
+#endif
+	bnez	a0, 1f	/* non-leaf func: stored in MCOUNT_RA_ADDRESS_REG */
+	 nop
+#endif
+	PTR_LA	a0, PT_R1(sp)	/* leaf func: the location in current stack */
+1:
+
+	/* arg2: Get self return address */
+#ifdef CONFIG_DYNAMIC_FTRACE
+	PTR_L	a1, PT_R31(sp)
+#else
+	move	a1, ra
+#endif
+
+	/* arg3: Get frame pointer of current stack */
+#ifdef CONFIG_64BIT
+	PTR_LA	a2, PT_SIZE(sp)
+#else
+	PTR_LA	a2, (PT_SIZE+8)(sp)
+#endif
+
+	jal	prepare_ftrace_return
+	 nop
+	MCOUNT_RESTORE_REGS
+#ifndef CONFIG_DYNAMIC_FTRACE
+#ifdef CONFIG_32BIT
+	addiu sp, sp, 8
+#endif
+#endif
+	RETURN_BACK
+	END(ftrace_graph_caller)
+
+	.align	2
+	.globl	return_to_handler
+return_to_handler:
+	PTR_SUBU	sp, PT_SIZE
+	PTR_S	v0, PT_R2(sp)
+
+	jal	ftrace_return_to_handler
+	 PTR_S	v1, PT_R3(sp)
+
+	/* restore the real parent address: v0 -> ra */
+	move	ra, v0
+
+	PTR_L	v0, PT_R2(sp)
+	PTR_L	v1, PT_R3(sp)
+	jr	ra
+	 PTR_ADDIU	sp, PT_SIZE
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+	.set at
+	.set reorder
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
new file mode 100644
index 000000000..85bbe9b96
--- /dev/null
+++ b/arch/mips/kernel/mips-cm.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/errno.h>
+
+#include <asm/mips-cm.h>
+#include <asm/mipsregs.h>
+
+void __iomem *mips_cm_base;
+void __iomem *mips_cm_l2sync_base;
+
+phys_addr_t __mips_cm_phys_base(void)
+{
+	u32 config3 = read_c0_config3();
+	u32 cmgcr;
+
+	/* Check the CMGCRBase register is implemented */
+	if (!(config3 & MIPS_CONF3_CMGCR))
+		return 0;
+
+	/* Read the address from CMGCRBase */
+	cmgcr = read_c0_cmgcrbase();
+	return (cmgcr & MIPS_CMGCRF_BASE) << (36 - 32);
+}
+
+phys_addr_t mips_cm_phys_base(void)
+	__attribute__((weak, alias("__mips_cm_phys_base")));
+
+phys_addr_t __mips_cm_l2sync_phys_base(void)
+{
+	u32 base_reg;
+
+	/*
+	 * If the L2-only sync region is already enabled then leave it at it's
+	 * current location.
+	 */
+	base_reg = read_gcr_l2_only_sync_base();
+	if (base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK)
+		return base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK;
+
+	/* Default to following the CM */
+	return mips_cm_phys_base() + MIPS_CM_GCR_SIZE;
+}
+
+phys_addr_t mips_cm_l2sync_phys_base(void)
+	__attribute__((weak, alias("__mips_cm_l2sync_phys_base")));
+
+static void mips_cm_probe_l2sync(void)
+{
+	unsigned major_rev;
+	phys_addr_t addr;
+
+	/* L2-only sync was introduced with CM major revision 6 */
+	major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR_MSK) >>
+		CM_GCR_REV_MAJOR_SHF;
+	if (major_rev < 6)
+		return;
+
+	/* Find a location for the L2 sync region */
+	addr = mips_cm_l2sync_phys_base();
+	BUG_ON((addr & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK) != addr);
+	if (!addr)
+		return;
+
+	/* Set the region base address & enable it */
+	write_gcr_l2_only_sync_base(addr | CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK);
+
+	/* Map the region */
+	mips_cm_l2sync_base = ioremap_nocache(addr, MIPS_CM_L2SYNC_SIZE);
+}
+
+int mips_cm_probe(void)
+{
+	phys_addr_t addr;
+	u32 base_reg;
+
+	addr = mips_cm_phys_base();
+	BUG_ON((addr & CM_GCR_BASE_GCRBASE_MSK) != addr);
+	if (!addr)
+		return -ENODEV;
+
+	mips_cm_base = ioremap_nocache(addr, MIPS_CM_GCR_SIZE);
+	if (!mips_cm_base)
+		return -ENXIO;
+
+	/* sanity check that we're looking at a CM */
+	base_reg = read_gcr_base();
+	if ((base_reg & CM_GCR_BASE_GCRBASE_MSK) != addr) {
+		pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n",
+		       (unsigned long)addr);
+		mips_cm_base = NULL;
+		return -ENODEV;
+	}
+
+	/* set default target to memory */
+	base_reg &= ~CM_GCR_BASE_CMDEFTGT_MSK;
+	base_reg |= CM_GCR_BASE_CMDEFTGT_MEM;
+	write_gcr_base(base_reg);
+
+	/* disable CM regions */
+	write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
+	write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+	write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
+	write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+	write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
+	write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+	write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
+	write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+
+	/* probe for an L2-only sync region */
+	mips_cm_probe_l2sync();
+
+	return 0;
+}
diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
new file mode 100644
index 000000000..11964501c
--- /dev/null
+++ b/arch/mips/kernel/mips-cpc.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
+
+#include <asm/mips-cm.h>
+#include <asm/mips-cpc.h>
+
+void __iomem *mips_cpc_base;
+
+static DEFINE_PER_CPU_ALIGNED(spinlock_t, cpc_core_lock);
+
+static DEFINE_PER_CPU_ALIGNED(unsigned long, cpc_core_lock_flags);
+
+phys_addr_t __weak mips_cpc_phys_base(void)
+{
+	u32 cpc_base;
+
+	if (!mips_cm_present())
+		return 0;
+
+	if (!(read_gcr_cpc_status() & CM_GCR_CPC_STATUS_EX_MSK))
+		return 0;
+
+	/* If the CPC is already enabled, leave it so */
+	cpc_base = read_gcr_cpc_base();
+	if (cpc_base & CM_GCR_CPC_BASE_CPCEN_MSK)
+		return cpc_base & CM_GCR_CPC_BASE_CPCBASE_MSK;
+
+	/* Otherwise, give it the default address & enable it */
+	cpc_base = mips_cpc_default_phys_base();
+	write_gcr_cpc_base(cpc_base | CM_GCR_CPC_BASE_CPCEN_MSK);
+	return cpc_base;
+}
+
+int mips_cpc_probe(void)
+{
+	phys_addr_t addr;
+	unsigned cpu;
+
+	for_each_possible_cpu(cpu)
+		spin_lock_init(&per_cpu(cpc_core_lock, cpu));
+
+	addr = mips_cpc_phys_base();
+	if (!addr)
+		return -ENODEV;
+
+	mips_cpc_base = ioremap_nocache(addr, 0x8000);
+	if (!mips_cpc_base)
+		return -ENXIO;
+
+	return 0;
+}
+
+void mips_cpc_lock_other(unsigned int core)
+{
+	unsigned curr_core;
+	preempt_disable();
+	curr_core = current_cpu_data.core;
+	spin_lock_irqsave(&per_cpu(cpc_core_lock, curr_core),
+			  per_cpu(cpc_core_lock_flags, curr_core));
+	write_cpc_cl_other(core << CPC_Cx_OTHER_CORENUM_SHF);
+}
+
+void mips_cpc_unlock_other(void)
+{
+	unsigned curr_core = current_cpu_data.core;
+	spin_unlock_irqrestore(&per_cpu(cpc_core_lock, curr_core),
+			       per_cpu(cpc_core_lock_flags, curr_core));
+	preempt_enable();
+}
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
new file mode 100644
index 000000000..3e4491aa6
--- /dev/null
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -0,0 +1,214 @@
+/*
+ * General MIPS MT support routines, usable in AP/SP and SMVP.
+ * Copyright (C) 2005 Mips Technologies, Inc
+ */
+#include <linux/cpu.h>
+#include <linux/cpuset.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/security.h>
+#include <linux/types.h>
+#include <asm/uaccess.h>
+
+/*
+ * CPU mask used to set process affinity for MT VPEs/TCs with FPUs
+ */
+cpumask_t mt_fpu_cpumask;
+
+static int fpaff_threshold = -1;
+unsigned long mt_fpemul_threshold;
+
+/*
+ * Replacement functions for the sys_sched_setaffinity() and
+ * sys_sched_getaffinity() system calls, so that we can integrate
+ * FPU affinity with the user's requested processor affinity.
+ * This code is 98% identical with the sys_sched_setaffinity()
+ * and sys_sched_getaffinity() system calls, and should be
+ * updated when kernel/sched/core.c changes.
+ */
+
+/*
+ * find_process_by_pid - find a process with a matching PID value.
+ * used in sys_sched_set/getaffinity() in kernel/sched/core.c, so
+ * cloned here.
+ */
+static inline struct task_struct *find_process_by_pid(pid_t pid)
+{
+	return pid ? find_task_by_vpid(pid) : current;
+}
+
+/*
+ * check the target process has a UID that matches the current process's
+ */
+static bool check_same_owner(struct task_struct *p)
+{
+	const struct cred *cred = current_cred(), *pcred;
+	bool match;
+
+	rcu_read_lock();
+	pcred = __task_cred(p);
+	match = (uid_eq(cred->euid, pcred->euid) ||
+		 uid_eq(cred->euid, pcred->uid));
+	rcu_read_unlock();
+	return match;
+}
+
+/*
+ * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process
+ */
+asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
+				      unsigned long __user *user_mask_ptr)
+{
+	cpumask_var_t cpus_allowed, new_mask, effective_mask;
+	struct thread_info *ti;
+	struct task_struct *p;
+	int retval;
+
+	if (len < sizeof(new_mask))
+		return -EINVAL;
+
+	if (copy_from_user(&new_mask, user_mask_ptr, sizeof(new_mask)))
+		return -EFAULT;
+
+	get_online_cpus();
+	rcu_read_lock();
+
+	p = find_process_by_pid(pid);
+	if (!p) {
+		rcu_read_unlock();
+		put_online_cpus();
+		return -ESRCH;
+	}
+
+	/* Prevent p going away */
+	get_task_struct(p);
+	rcu_read_unlock();
+
+	if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_put_task;
+	}
+	if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_free_cpus_allowed;
+	}
+	if (!alloc_cpumask_var(&effective_mask, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_free_new_mask;
+	}
+	retval = -EPERM;
+	if (!check_same_owner(p) && !capable(CAP_SYS_NICE))
+		goto out_unlock;
+
+	retval = security_task_setscheduler(p);
+	if (retval)
+		goto out_unlock;
+
+	/* Record new user-specified CPU set for future reference */
+	cpumask_copy(&p->thread.user_cpus_allowed, new_mask);
+
+ again:
+	/* Compute new global allowed CPU set if necessary */
+	ti = task_thread_info(p);
+	if (test_ti_thread_flag(ti, TIF_FPUBOUND) &&
+	    cpumask_intersects(new_mask, &mt_fpu_cpumask)) {
+		cpumask_and(effective_mask, new_mask, &mt_fpu_cpumask);
+		retval = set_cpus_allowed_ptr(p, effective_mask);
+	} else {
+		cpumask_copy(effective_mask, new_mask);
+		clear_ti_thread_flag(ti, TIF_FPUBOUND);
+		retval = set_cpus_allowed_ptr(p, new_mask);
+	}
+
+	if (!retval) {
+		cpuset_cpus_allowed(p, cpus_allowed);
+		if (!cpumask_subset(effective_mask, cpus_allowed)) {
+			/*
+			 * We must have raced with a concurrent cpuset
+			 * update. Just reset the cpus_allowed to the
+			 * cpuset's cpus_allowed
+			 */
+			cpumask_copy(new_mask, cpus_allowed);
+			goto again;
+		}
+	}
+out_unlock:
+	free_cpumask_var(effective_mask);
+out_free_new_mask:
+	free_cpumask_var(new_mask);
+out_free_cpus_allowed:
+	free_cpumask_var(cpus_allowed);
+out_put_task:
+	put_task_struct(p);
+	put_online_cpus();
+	return retval;
+}
+
+/*
+ * mipsmt_sys_sched_getaffinity - get the cpu affinity of a process
+ */
+asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len,
+				      unsigned long __user *user_mask_ptr)
+{
+	unsigned int real_len;
+	cpumask_t mask;
+	int retval;
+	struct task_struct *p;
+
+	real_len = sizeof(mask);
+	if (len < real_len)
+		return -EINVAL;
+
+	get_online_cpus();
+	read_lock(&tasklist_lock);
+
+	retval = -ESRCH;
+	p = find_process_by_pid(pid);
+	if (!p)
+		goto out_unlock;
+	retval = security_task_getscheduler(p);
+	if (retval)
+		goto out_unlock;
+
+	cpumask_and(&mask, &p->thread.user_cpus_allowed, cpu_possible_mask);
+
+out_unlock:
+	read_unlock(&tasklist_lock);
+	put_online_cpus();
+	if (retval)
+		return retval;
+	if (copy_to_user(user_mask_ptr, &mask, real_len))
+		return -EFAULT;
+	return real_len;
+}
+
+
+static int __init fpaff_thresh(char *str)
+{
+	get_option(&str, &fpaff_threshold);
+	return 1;
+}
+__setup("fpaff=", fpaff_thresh);
+
+/*
+ * FPU Use Factor empirically derived from experiments on 34K
+ */
+#define FPUSEFACTOR 2000
+
+static __init int mt_fp_affinity_init(void)
+{
+	if (fpaff_threshold >= 0) {
+		mt_fpemul_threshold = fpaff_threshold;
+	} else {
+		mt_fpemul_threshold =
+			(FPUSEFACTOR * (loops_per_jiffy/(500000/HZ))) / HZ;
+	}
+	printk(KERN_DEBUG "FPU Affinity set after %ld emulations\n",
+	       mt_fpemul_threshold);
+
+	return 0;
+}
+arch_initcall(mt_fp_affinity_init);
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
new file mode 100644
index 000000000..88b1ef5f8
--- /dev/null
+++ b/arch/mips/kernel/mips-mt.c
@@ -0,0 +1,315 @@
+/*
+ * General MIPS MT support routines, usable in AP/SP and SMVP.
+ * Copyright (C) 2005 Mips Technologies, Inc
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/security.h>
+
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <linux/atomic.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/mipsmtregs.h>
+#include <asm/r4kcache.h>
+#include <asm/cacheflush.h>
+
+int vpelimit;
+
+static int __init maxvpes(char *str)
+{
+	get_option(&str, &vpelimit);
+
+	return 1;
+}
+
+__setup("maxvpes=", maxvpes);
+
+int tclimit;
+
+static int __init maxtcs(char *str)
+{
+	get_option(&str, &tclimit);
+
+	return 1;
+}
+
+__setup("maxtcs=", maxtcs);
+
+/*
+ * Dump new MIPS MT state for the core. Does not leave TCs halted.
+ * Takes an argument which taken to be a pre-call MVPControl value.
+ */
+
+void mips_mt_regdump(unsigned long mvpctl)
+{
+	unsigned long flags;
+	unsigned long vpflags;
+	unsigned long mvpconf0;
+	int nvpe;
+	int ntc;
+	int i;
+	int tc;
+	unsigned long haltval;
+	unsigned long tcstatval;
+
+	local_irq_save(flags);
+	vpflags = dvpe();
+	printk("=== MIPS MT State Dump ===\n");
+	printk("-- Global State --\n");
+	printk("   MVPControl Passed: %08lx\n", mvpctl);
+	printk("   MVPControl Read: %08lx\n", vpflags);
+	printk("   MVPConf0 : %08lx\n", (mvpconf0 = read_c0_mvpconf0()));
+	nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+	ntc = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+	printk("-- per-VPE State --\n");
+	for (i = 0; i < nvpe; i++) {
+		for (tc = 0; tc < ntc; tc++) {
+			settc(tc);
+			if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
+				printk("  VPE %d\n", i);
+				printk("   VPEControl : %08lx\n",
+				       read_vpe_c0_vpecontrol());
+				printk("   VPEConf0 : %08lx\n",
+				       read_vpe_c0_vpeconf0());
+				printk("   VPE%d.Status : %08lx\n",
+				       i, read_vpe_c0_status());
+				printk("   VPE%d.EPC : %08lx %pS\n",
+				       i, read_vpe_c0_epc(),
+				       (void *) read_vpe_c0_epc());
+				printk("   VPE%d.Cause : %08lx\n",
+				       i, read_vpe_c0_cause());
+				printk("   VPE%d.Config7 : %08lx\n",
+				       i, read_vpe_c0_config7());
+				break; /* Next VPE */
+			}
+		}
+	}
+	printk("-- per-TC State --\n");
+	for (tc = 0; tc < ntc; tc++) {
+		settc(tc);
+		if (read_tc_c0_tcbind() == read_c0_tcbind()) {
+			/* Are we dumping ourself?  */
+			haltval = 0; /* Then we're not halted, and mustn't be */
+			tcstatval = flags; /* And pre-dump TCStatus is flags */
+			printk("  TC %d (current TC with VPE EPC above)\n", tc);
+		} else {
+			haltval = read_tc_c0_tchalt();
+			write_tc_c0_tchalt(1);
+			tcstatval = read_tc_c0_tcstatus();
+			printk("  TC %d\n", tc);
+		}
+		printk("   TCStatus : %08lx\n", tcstatval);
+		printk("   TCBind : %08lx\n", read_tc_c0_tcbind());
+		printk("   TCRestart : %08lx %pS\n",
+		       read_tc_c0_tcrestart(), (void *) read_tc_c0_tcrestart());
+		printk("   TCHalt : %08lx\n", haltval);
+		printk("   TCContext : %08lx\n", read_tc_c0_tccontext());
+		if (!haltval)
+			write_tc_c0_tchalt(0);
+	}
+	printk("===========================\n");
+	evpe(vpflags);
+	local_irq_restore(flags);
+}
+
+static int mt_opt_norps;
+static int mt_opt_rpsctl = -1;
+static int mt_opt_nblsu = -1;
+static int mt_opt_forceconfig7;
+static int mt_opt_config7 = -1;
+
+static int __init rps_disable(char *s)
+{
+	mt_opt_norps = 1;
+	return 1;
+}
+__setup("norps", rps_disable);
+
+static int __init rpsctl_set(char *str)
+{
+	get_option(&str, &mt_opt_rpsctl);
+	return 1;
+}
+__setup("rpsctl=", rpsctl_set);
+
+static int __init nblsu_set(char *str)
+{
+	get_option(&str, &mt_opt_nblsu);
+	return 1;
+}
+__setup("nblsu=", nblsu_set);
+
+static int __init config7_set(char *str)
+{
+	get_option(&str, &mt_opt_config7);
+	mt_opt_forceconfig7 = 1;
+	return 1;
+}
+__setup("config7=", config7_set);
+
+/* Experimental cache flush control parameters that should go away some day */
+int mt_protiflush;
+int mt_protdflush;
+int mt_n_iflushes = 1;
+int mt_n_dflushes = 1;
+
+static int __init set_protiflush(char *s)
+{
+	mt_protiflush = 1;
+	return 1;
+}
+__setup("protiflush", set_protiflush);
+
+static int __init set_protdflush(char *s)
+{
+	mt_protdflush = 1;
+	return 1;
+}
+__setup("protdflush", set_protdflush);
+
+static int __init niflush(char *s)
+{
+	get_option(&s, &mt_n_iflushes);
+	return 1;
+}
+__setup("niflush=", niflush);
+
+static int __init ndflush(char *s)
+{
+	get_option(&s, &mt_n_dflushes);
+	return 1;
+}
+__setup("ndflush=", ndflush);
+
+static unsigned int itc_base;
+
+static int __init set_itc_base(char *str)
+{
+	get_option(&str, &itc_base);
+	return 1;
+}
+
+__setup("itcbase=", set_itc_base);
+
+void mips_mt_set_cpuoptions(void)
+{
+	unsigned int oconfig7 = read_c0_config7();
+	unsigned int nconfig7 = oconfig7;
+
+	if (mt_opt_norps) {
+		printk("\"norps\" option deprecated: use \"rpsctl=\"\n");
+	}
+	if (mt_opt_rpsctl >= 0) {
+		printk("34K return prediction stack override set to %d.\n",
+			mt_opt_rpsctl);
+		if (mt_opt_rpsctl)
+			nconfig7 |= (1 << 2);
+		else
+			nconfig7 &= ~(1 << 2);
+	}
+	if (mt_opt_nblsu >= 0) {
+		printk("34K ALU/LSU sync override set to %d.\n", mt_opt_nblsu);
+		if (mt_opt_nblsu)
+			nconfig7 |= (1 << 5);
+		else
+			nconfig7 &= ~(1 << 5);
+	}
+	if (mt_opt_forceconfig7) {
+		printk("CP0.Config7 forced to 0x%08x.\n", mt_opt_config7);
+		nconfig7 = mt_opt_config7;
+	}
+	if (oconfig7 != nconfig7) {
+		__asm__ __volatile("sync");
+		write_c0_config7(nconfig7);
+		ehb();
+		printk("Config7: 0x%08x\n", read_c0_config7());
+	}
+
+	/* Report Cache management debug options */
+	if (mt_protiflush)
+		printk("I-cache flushes single-threaded\n");
+	if (mt_protdflush)
+		printk("D-cache flushes single-threaded\n");
+	if (mt_n_iflushes != 1)
+		printk("I-Cache Flushes Repeated %d times\n", mt_n_iflushes);
+	if (mt_n_dflushes != 1)
+		printk("D-Cache Flushes Repeated %d times\n", mt_n_dflushes);
+
+	if (itc_base != 0) {
+		/*
+		 * Configure ITC mapping.  This code is very
+		 * specific to the 34K core family, which uses
+		 * a special mode bit ("ITC") in the ErrCtl
+		 * register to enable access to ITC control
+		 * registers via cache "tag" operations.
+		 */
+		unsigned long ectlval;
+		unsigned long itcblkgrn;
+
+		/* ErrCtl register is known as "ecc" to Linux */
+		ectlval = read_c0_ecc();
+		write_c0_ecc(ectlval | (0x1 << 26));
+		ehb();
+#define INDEX_0 (0x80000000)
+#define INDEX_8 (0x80000008)
+		/* Read "cache tag" for Dcache pseudo-index 8 */
+		cache_op(Index_Load_Tag_D, INDEX_8);
+		ehb();
+		itcblkgrn = read_c0_dtaglo();
+		itcblkgrn &= 0xfffe0000;
+		/* Set for 128 byte pitch of ITC cells */
+		itcblkgrn |= 0x00000c00;
+		/* Stage in Tag register */
+		write_c0_dtaglo(itcblkgrn);
+		ehb();
+		/* Write out to ITU with CACHE op */
+		cache_op(Index_Store_Tag_D, INDEX_8);
+		/* Now set base address, and turn ITC on with 0x1 bit */
+		write_c0_dtaglo((itc_base & 0xfffffc00) | 0x1 );
+		ehb();
+		/* Write out to ITU with CACHE op */
+		cache_op(Index_Store_Tag_D, INDEX_0);
+		write_c0_ecc(ectlval);
+		ehb();
+		printk("Mapped %ld ITC cells starting at 0x%08x\n",
+			((itcblkgrn & 0x7fe00000) >> 20), itc_base);
+	}
+}
+
+/*
+ * Function to protect cache flushes from concurrent execution
+ * depends on MP software model chosen.
+ */
+
+void mt_cflush_lockdown(void)
+{
+	/* FILL IN VSMP and AP/SP VERSIONS HERE */
+}
+
+void mt_cflush_release(void)
+{
+	/* FILL IN VSMP and AP/SP VERSIONS HERE */
+}
+
+struct class *mt_class;
+
+static int __init mt_init(void)
+{
+	struct class *mtc;
+
+	mtc = class_create(THIS_MODULE, "mt");
+	if (IS_ERR(mtc))
+		return PTR_ERR(mtc);
+
+	mt_class = mtc;
+
+	return 0;
+}
+
+subsys_initcall(mt_init);
diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
new file mode 100644
index 000000000..f2977f009
--- /dev/null
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -0,0 +1,2389 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2014 Imagination Technologies Ltd.
+ * Author: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
+ * Author: Markos Chandras <markos.chandras@imgtec.com>
+ *
+ *      MIPS R2 user space instruction emulator for MIPS R6
+ *
+ */
+#include <linux/bug.h>
+#include <linux/compiler.h>
+#include <linux/debugfs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/seq_file.h>
+
+#include <asm/asm.h>
+#include <asm/branch.h>
+#include <asm/break.h>
+#include <asm/fpu.h>
+#include <asm/fpu_emulator.h>
+#include <asm/inst.h>
+#include <asm/mips-r2-to-r6-emul.h>
+#include <asm/local.h>
+#include <asm/ptrace.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_64BIT
+#define ADDIU	"daddiu "
+#define INS	"dins "
+#define EXT	"dext "
+#else
+#define ADDIU	"addiu "
+#define INS	"ins "
+#define EXT	"ext "
+#endif /* CONFIG_64BIT */
+
+#define SB	"sb "
+#define LB	"lb "
+#define LL	"ll "
+#define SC	"sc "
+
+DEFINE_PER_CPU(struct mips_r2_emulator_stats, mipsr2emustats);
+DEFINE_PER_CPU(struct mips_r2_emulator_stats, mipsr2bdemustats);
+DEFINE_PER_CPU(struct mips_r2br_emulator_stats, mipsr2bremustats);
+
+extern const unsigned int fpucondbit[8];
+
+#define MIPS_R2_EMUL_TOTAL_PASS	10
+
+int mipsr2_emulation = 0;
+
+static int __init mipsr2emu_enable(char *s)
+{
+	mipsr2_emulation = 1;
+
+	pr_info("MIPS R2-to-R6 Emulator Enabled!");
+
+	return 1;
+}
+__setup("mipsr2emu", mipsr2emu_enable);
+
+/**
+ * mipsr6_emul - Emulate some frequent R2/R5/R6 instructions in delay slot
+ * for performance instead of the traditional way of using a stack trampoline
+ * which is rather slow.
+ * @regs: Process register set
+ * @ir: Instruction
+ */
+static inline int mipsr6_emul(struct pt_regs *regs, u32 ir)
+{
+	switch (MIPSInst_OPCODE(ir)) {
+	case addiu_op:
+		if (MIPSInst_RT(ir))
+			regs->regs[MIPSInst_RT(ir)] =
+				(s32)regs->regs[MIPSInst_RS(ir)] +
+				(s32)MIPSInst_SIMM(ir);
+		return 0;
+	case daddiu_op:
+		if (config_enabled(CONFIG_32BIT))
+			break;
+
+		if (MIPSInst_RT(ir))
+			regs->regs[MIPSInst_RT(ir)] =
+				(s64)regs->regs[MIPSInst_RS(ir)] +
+				(s64)MIPSInst_SIMM(ir);
+		return 0;
+	case lwc1_op:
+	case swc1_op:
+	case cop1_op:
+	case cop1x_op:
+		/* FPU instructions in delay slot */
+		return -SIGFPE;
+	case spec_op:
+		switch (MIPSInst_FUNC(ir)) {
+		case or_op:
+			if (MIPSInst_RD(ir))
+				regs->regs[MIPSInst_RD(ir)] =
+					regs->regs[MIPSInst_RS(ir)] |
+					regs->regs[MIPSInst_RT(ir)];
+			return 0;
+		case sll_op:
+			if (MIPSInst_RS(ir))
+				break;
+
+			if (MIPSInst_RD(ir))
+				regs->regs[MIPSInst_RD(ir)] =
+					(s32)(((u32)regs->regs[MIPSInst_RT(ir)]) <<
+						MIPSInst_FD(ir));
+			return 0;
+		case srl_op:
+			if (MIPSInst_RS(ir))
+				break;
+
+			if (MIPSInst_RD(ir))
+				regs->regs[MIPSInst_RD(ir)] =
+					(s32)(((u32)regs->regs[MIPSInst_RT(ir)]) >>
+						MIPSInst_FD(ir));
+			return 0;
+		case addu_op:
+			if (MIPSInst_FD(ir))
+				break;
+
+			if (MIPSInst_RD(ir))
+				regs->regs[MIPSInst_RD(ir)] =
+					(s32)((u32)regs->regs[MIPSInst_RS(ir)] +
+					      (u32)regs->regs[MIPSInst_RT(ir)]);
+			return 0;
+		case subu_op:
+			if (MIPSInst_FD(ir))
+				break;
+
+			if (MIPSInst_RD(ir))
+				regs->regs[MIPSInst_RD(ir)] =
+					(s32)((u32)regs->regs[MIPSInst_RS(ir)] -
+					      (u32)regs->regs[MIPSInst_RT(ir)]);
+			return 0;
+		case dsll_op:
+			if (config_enabled(CONFIG_32BIT) || MIPSInst_RS(ir))
+				break;
+
+			if (MIPSInst_RD(ir))
+				regs->regs[MIPSInst_RD(ir)] =
+					(s64)(((u64)regs->regs[MIPSInst_RT(ir)]) <<
+						MIPSInst_FD(ir));
+			return 0;
+		case dsrl_op:
+			if (config_enabled(CONFIG_32BIT) || MIPSInst_RS(ir))
+				break;
+
+			if (MIPSInst_RD(ir))
+				regs->regs[MIPSInst_RD(ir)] =
+					(s64)(((u64)regs->regs[MIPSInst_RT(ir)]) >>
+						MIPSInst_FD(ir));
+			return 0;
+		case daddu_op:
+			if (config_enabled(CONFIG_32BIT) || MIPSInst_FD(ir))
+				break;
+
+			if (MIPSInst_RD(ir))
+				regs->regs[MIPSInst_RD(ir)] =
+					(u64)regs->regs[MIPSInst_RS(ir)] +
+					(u64)regs->regs[MIPSInst_RT(ir)];
+			return 0;
+		case dsubu_op:
+			if (config_enabled(CONFIG_32BIT) || MIPSInst_FD(ir))
+				break;
+
+			if (MIPSInst_RD(ir))
+				regs->regs[MIPSInst_RD(ir)] =
+					(s64)((u64)regs->regs[MIPSInst_RS(ir)] -
+					      (u64)regs->regs[MIPSInst_RT(ir)]);
+			return 0;
+		}
+		break;
+	default:
+		pr_debug("No fastpath BD emulation for instruction 0x%08x (op: %02x)\n",
+			 ir, MIPSInst_OPCODE(ir));
+	}
+
+	return SIGILL;
+}
+
+/**
+ * movf_func - Emulate a MOVF instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int movf_func(struct pt_regs *regs, u32 ir)
+{
+	u32 csr;
+	u32 cond;
+
+	csr = current->thread.fpu.fcr31;
+	cond = fpucondbit[MIPSInst_RT(ir) >> 2];
+
+	if (((csr & cond) == 0) && MIPSInst_RD(ir))
+		regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)];
+
+	MIPS_R2_STATS(movs);
+
+	return 0;
+}
+
+/**
+ * movt_func - Emulate a MOVT instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int movt_func(struct pt_regs *regs, u32 ir)
+{
+	u32 csr;
+	u32 cond;
+
+	csr = current->thread.fpu.fcr31;
+	cond = fpucondbit[MIPSInst_RT(ir) >> 2];
+
+	if (((csr & cond) != 0) && MIPSInst_RD(ir))
+		regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)];
+
+	MIPS_R2_STATS(movs);
+
+	return 0;
+}
+
+/**
+ * jr_func - Emulate a JR instruction.
+ * @pt_regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns SIGILL if JR was in delay slot, SIGEMT if we
+ * can't compute the EPC, SIGSEGV if we can't access the
+ * userland instruction or 0 on success.
+ */
+static int jr_func(struct pt_regs *regs, u32 ir)
+{
+	int err;
+	unsigned long cepc, epc, nepc;
+	u32 nir;
+
+	if (delay_slot(regs))
+		return SIGILL;
+
+	/* EPC after the RI/JR instruction */
+	nepc = regs->cp0_epc;
+	/* Roll back to the reserved R2 JR instruction */
+	regs->cp0_epc -= 4;
+	epc = regs->cp0_epc;
+	err = __compute_return_epc(regs);
+
+	if (err < 0)
+		return SIGEMT;
+
+
+	/* Computed EPC */
+	cepc = regs->cp0_epc;
+
+	/* Get DS instruction */
+	err = __get_user(nir, (u32 __user *)nepc);
+	if (err)
+		return SIGSEGV;
+
+	MIPS_R2BR_STATS(jrs);
+
+	/* If nir == 0(NOP), then nothing else to do */
+	if (nir) {
+		/*
+		 * Negative err means FPU instruction in BD-slot,
+		 * Zero err means 'BD-slot emulation done'
+		 * For anything else we go back to trampoline emulation.
+		 */
+		err = mipsr6_emul(regs, nir);
+		if (err > 0) {
+			regs->cp0_epc = nepc;
+			err = mips_dsemul(regs, nir, cepc);
+			if (err == SIGILL)
+				err = SIGEMT;
+			MIPS_R2_STATS(dsemul);
+		}
+	}
+
+	return err;
+}
+
+/**
+ * movz_func - Emulate a MOVZ instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int movz_func(struct pt_regs *regs, u32 ir)
+{
+	if (((regs->regs[MIPSInst_RT(ir)]) == 0) && MIPSInst_RD(ir))
+		regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)];
+	MIPS_R2_STATS(movs);
+
+	return 0;
+}
+
+/**
+ * movn_func - Emulate a MOVZ instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int movn_func(struct pt_regs *regs, u32 ir)
+{
+	if (((regs->regs[MIPSInst_RT(ir)]) != 0) && MIPSInst_RD(ir))
+		regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)];
+	MIPS_R2_STATS(movs);
+
+	return 0;
+}
+
+/**
+ * mfhi_func - Emulate a MFHI instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int mfhi_func(struct pt_regs *regs, u32 ir)
+{
+	if (MIPSInst_RD(ir))
+		regs->regs[MIPSInst_RD(ir)] = regs->hi;
+
+	MIPS_R2_STATS(hilo);
+
+	return 0;
+}
+
+/**
+ * mthi_func - Emulate a MTHI instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int mthi_func(struct pt_regs *regs, u32 ir)
+{
+	regs->hi = regs->regs[MIPSInst_RS(ir)];
+
+	MIPS_R2_STATS(hilo);
+
+	return 0;
+}
+
+/**
+ * mflo_func - Emulate a MFLO instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int mflo_func(struct pt_regs *regs, u32 ir)
+{
+	if (MIPSInst_RD(ir))
+		regs->regs[MIPSInst_RD(ir)] = regs->lo;
+
+	MIPS_R2_STATS(hilo);
+
+	return 0;
+}
+
+/**
+ * mtlo_func - Emulate a MTLO instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int mtlo_func(struct pt_regs *regs, u32 ir)
+{
+	regs->lo = regs->regs[MIPSInst_RS(ir)];
+
+	MIPS_R2_STATS(hilo);
+
+	return 0;
+}
+
+/**
+ * mult_func - Emulate a MULT instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int mult_func(struct pt_regs *regs, u32 ir)
+{
+	s64 res;
+	s32 rt, rs;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+	res = (s64)rt * (s64)rs;
+
+	rs = res;
+	regs->lo = (s64)rs;
+	rt = res >> 32;
+	res = (s64)rt;
+	regs->hi = res;
+
+	MIPS_R2_STATS(muls);
+
+	return 0;
+}
+
+/**
+ * multu_func - Emulate a MULTU instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int multu_func(struct pt_regs *regs, u32 ir)
+{
+	u64 res;
+	u32 rt, rs;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+	res = (u64)rt * (u64)rs;
+	rt = res;
+	regs->lo = (s64)rt;
+	regs->hi = (s64)(res >> 32);
+
+	MIPS_R2_STATS(muls);
+
+	return 0;
+}
+
+/**
+ * div_func - Emulate a DIV instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int div_func(struct pt_regs *regs, u32 ir)
+{
+	s32 rt, rs;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+
+	regs->lo = (s64)(rs / rt);
+	regs->hi = (s64)(rs % rt);
+
+	MIPS_R2_STATS(divs);
+
+	return 0;
+}
+
+/**
+ * divu_func - Emulate a DIVU instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int divu_func(struct pt_regs *regs, u32 ir)
+{
+	u32 rt, rs;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+
+	regs->lo = (s64)(rs / rt);
+	regs->hi = (s64)(rs % rt);
+
+	MIPS_R2_STATS(divs);
+
+	return 0;
+}
+
+/**
+ * dmult_func - Emulate a DMULT instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 on success or SIGILL for 32-bit kernels.
+ */
+static int dmult_func(struct pt_regs *regs, u32 ir)
+{
+	s64 res;
+	s64 rt, rs;
+
+	if (config_enabled(CONFIG_32BIT))
+		return SIGILL;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+	res = rt * rs;
+
+	regs->lo = res;
+	__asm__ __volatile__(
+		"dmuh %0, %1, %2\t\n"
+		: "=r"(res)
+		: "r"(rt), "r"(rs));
+
+	regs->hi = res;
+
+	MIPS_R2_STATS(muls);
+
+	return 0;
+}
+
+/**
+ * dmultu_func - Emulate a DMULTU instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 on success or SIGILL for 32-bit kernels.
+ */
+static int dmultu_func(struct pt_regs *regs, u32 ir)
+{
+	u64 res;
+	u64 rt, rs;
+
+	if (config_enabled(CONFIG_32BIT))
+		return SIGILL;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+	res = rt * rs;
+
+	regs->lo = res;
+	__asm__ __volatile__(
+		"dmuhu %0, %1, %2\t\n"
+		: "=r"(res)
+		: "r"(rt), "r"(rs));
+
+	regs->hi = res;
+
+	MIPS_R2_STATS(muls);
+
+	return 0;
+}
+
+/**
+ * ddiv_func - Emulate a DDIV instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 on success or SIGILL for 32-bit kernels.
+ */
+static int ddiv_func(struct pt_regs *regs, u32 ir)
+{
+	s64 rt, rs;
+
+	if (config_enabled(CONFIG_32BIT))
+		return SIGILL;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+
+	regs->lo = rs / rt;
+	regs->hi = rs % rt;
+
+	MIPS_R2_STATS(divs);
+
+	return 0;
+}
+
+/**
+ * ddivu_func - Emulate a DDIVU instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 on success or SIGILL for 32-bit kernels.
+ */
+static int ddivu_func(struct pt_regs *regs, u32 ir)
+{
+	u64 rt, rs;
+
+	if (config_enabled(CONFIG_32BIT))
+		return SIGILL;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+
+	regs->lo = rs / rt;
+	regs->hi = rs % rt;
+
+	MIPS_R2_STATS(divs);
+
+	return 0;
+}
+
+/* R6 removed instructions for the SPECIAL opcode */
+static struct r2_decoder_table spec_op_table[] = {
+	{ 0xfc1ff83f, 0x00000008, jr_func },
+	{ 0xfc00ffff, 0x00000018, mult_func },
+	{ 0xfc00ffff, 0x00000019, multu_func },
+	{ 0xfc00ffff, 0x0000001c, dmult_func },
+	{ 0xfc00ffff, 0x0000001d, dmultu_func },
+	{ 0xffff07ff, 0x00000010, mfhi_func },
+	{ 0xfc1fffff, 0x00000011, mthi_func },
+	{ 0xffff07ff, 0x00000012, mflo_func },
+	{ 0xfc1fffff, 0x00000013, mtlo_func },
+	{ 0xfc0307ff, 0x00000001, movf_func },
+	{ 0xfc0307ff, 0x00010001, movt_func },
+	{ 0xfc0007ff, 0x0000000a, movz_func },
+	{ 0xfc0007ff, 0x0000000b, movn_func },
+	{ 0xfc00ffff, 0x0000001a, div_func },
+	{ 0xfc00ffff, 0x0000001b, divu_func },
+	{ 0xfc00ffff, 0x0000001e, ddiv_func },
+	{ 0xfc00ffff, 0x0000001f, ddivu_func },
+	{}
+};
+
+/**
+ * madd_func - Emulate a MADD instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int madd_func(struct pt_regs *regs, u32 ir)
+{
+	s64 res;
+	s32 rt, rs;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+	res = (s64)rt * (s64)rs;
+	rt = regs->hi;
+	rs = regs->lo;
+	res += ((((s64)rt) << 32) | (u32)rs);
+
+	rt = res;
+	regs->lo = (s64)rt;
+	rs = res >> 32;
+	regs->hi = (s64)rs;
+
+	MIPS_R2_STATS(dsps);
+
+	return 0;
+}
+
+/**
+ * maddu_func - Emulate a MADDU instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int maddu_func(struct pt_regs *regs, u32 ir)
+{
+	u64 res;
+	u32 rt, rs;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+	res = (u64)rt * (u64)rs;
+	rt = regs->hi;
+	rs = regs->lo;
+	res += ((((s64)rt) << 32) | (u32)rs);
+
+	rt = res;
+	regs->lo = (s64)rt;
+	rs = res >> 32;
+	regs->hi = (s64)rs;
+
+	MIPS_R2_STATS(dsps);
+
+	return 0;
+}
+
+/**
+ * msub_func - Emulate a MSUB instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int msub_func(struct pt_regs *regs, u32 ir)
+{
+	s64 res;
+	s32 rt, rs;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+	res = (s64)rt * (s64)rs;
+	rt = regs->hi;
+	rs = regs->lo;
+	res = ((((s64)rt) << 32) | (u32)rs) - res;
+
+	rt = res;
+	regs->lo = (s64)rt;
+	rs = res >> 32;
+	regs->hi = (s64)rs;
+
+	MIPS_R2_STATS(dsps);
+
+	return 0;
+}
+
+/**
+ * msubu_func - Emulate a MSUBU instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int msubu_func(struct pt_regs *regs, u32 ir)
+{
+	u64 res;
+	u32 rt, rs;
+
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+	res = (u64)rt * (u64)rs;
+	rt = regs->hi;
+	rs = regs->lo;
+	res = ((((s64)rt) << 32) | (u32)rs) - res;
+
+	rt = res;
+	regs->lo = (s64)rt;
+	rs = res >> 32;
+	regs->hi = (s64)rs;
+
+	MIPS_R2_STATS(dsps);
+
+	return 0;
+}
+
+/**
+ * mul_func - Emulate a MUL instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int mul_func(struct pt_regs *regs, u32 ir)
+{
+	s64 res;
+	s32 rt, rs;
+
+	if (!MIPSInst_RD(ir))
+		return 0;
+	rt = regs->regs[MIPSInst_RT(ir)];
+	rs = regs->regs[MIPSInst_RS(ir)];
+	res = (s64)rt * (s64)rs;
+
+	rs = res;
+	regs->regs[MIPSInst_RD(ir)] = (s64)rs;
+
+	MIPS_R2_STATS(muls);
+
+	return 0;
+}
+
+/**
+ * clz_func - Emulate a CLZ instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int clz_func(struct pt_regs *regs, u32 ir)
+{
+	u32 res;
+	u32 rs;
+
+	if (!MIPSInst_RD(ir))
+		return 0;
+
+	rs = regs->regs[MIPSInst_RS(ir)];
+	__asm__ __volatile__("clz %0, %1" : "=r"(res) : "r"(rs));
+	regs->regs[MIPSInst_RD(ir)] = res;
+
+	MIPS_R2_STATS(bops);
+
+	return 0;
+}
+
+/**
+ * clo_func - Emulate a CLO instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+
+static int clo_func(struct pt_regs *regs, u32 ir)
+{
+	u32 res;
+	u32 rs;
+
+	if (!MIPSInst_RD(ir))
+		return 0;
+
+	rs = regs->regs[MIPSInst_RS(ir)];
+	__asm__ __volatile__("clo %0, %1" : "=r"(res) : "r"(rs));
+	regs->regs[MIPSInst_RD(ir)] = res;
+
+	MIPS_R2_STATS(bops);
+
+	return 0;
+}
+
+/**
+ * dclz_func - Emulate a DCLZ instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int dclz_func(struct pt_regs *regs, u32 ir)
+{
+	u64 res;
+	u64 rs;
+
+	if (config_enabled(CONFIG_32BIT))
+		return SIGILL;
+
+	if (!MIPSInst_RD(ir))
+		return 0;
+
+	rs = regs->regs[MIPSInst_RS(ir)];
+	__asm__ __volatile__("dclz %0, %1" : "=r"(res) : "r"(rs));
+	regs->regs[MIPSInst_RD(ir)] = res;
+
+	MIPS_R2_STATS(bops);
+
+	return 0;
+}
+
+/**
+ * dclo_func - Emulate a DCLO instruction
+ * @regs: Process register set
+ * @ir: Instruction
+ *
+ * Returns 0 since it always succeeds.
+ */
+static int dclo_func(struct pt_regs *regs, u32 ir)
+{
+	u64 res;
+	u64 rs;
+
+	if (config_enabled(CONFIG_32BIT))
+		return SIGILL;
+
+	if (!MIPSInst_RD(ir))
+		return 0;
+
+	rs = regs->regs[MIPSInst_RS(ir)];
+	__asm__ __volatile__("dclo %0, %1" : "=r"(res) : "r"(rs));
+	regs->regs[MIPSInst_RD(ir)] = res;
+
+	MIPS_R2_STATS(bops);
+
+	return 0;
+}
+
+/* R6 removed instructions for the SPECIAL2 opcode */
+static struct r2_decoder_table spec2_op_table[] = {
+	{ 0xfc00ffff, 0x70000000, madd_func },
+	{ 0xfc00ffff, 0x70000001, maddu_func },
+	{ 0xfc0007ff, 0x70000002, mul_func },
+	{ 0xfc00ffff, 0x70000004, msub_func },
+	{ 0xfc00ffff, 0x70000005, msubu_func },
+	{ 0xfc0007ff, 0x70000020, clz_func },
+	{ 0xfc0007ff, 0x70000021, clo_func },
+	{ 0xfc0007ff, 0x70000024, dclz_func },
+	{ 0xfc0007ff, 0x70000025, dclo_func },
+	{ }
+};
+
+static inline int mipsr2_find_op_func(struct pt_regs *regs, u32 inst,
+				      struct r2_decoder_table *table)
+{
+	struct r2_decoder_table *p;
+	int err;
+
+	for (p = table; p->func; p++) {
+		if ((inst & p->mask) == p->code) {
+			err = (p->func)(regs, inst);
+			return err;
+		}
+	}
+	return SIGILL;
+}
+
+/**
+ * mipsr2_decoder: Decode and emulate a MIPS R2 instruction
+ * @regs: Process register set
+ * @inst: Instruction to decode and emulate
+ * @fcr31: Floating Point Control and Status Register returned
+ */
+int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
+{
+	int err = 0;
+	unsigned long vaddr;
+	u32 nir;
+	unsigned long cpc, epc, nepc, r31, res, rs, rt;
+
+	void __user *fault_addr = NULL;
+	int pass = 0;
+
+repeat:
+	r31 = regs->regs[31];
+	epc = regs->cp0_epc;
+	err = compute_return_epc(regs);
+	if (err < 0) {
+		BUG();
+		return SIGEMT;
+	}
+	pr_debug("Emulating the 0x%08x R2 instruction @ 0x%08lx (pass=%d))\n",
+		 inst, epc, pass);
+
+	switch (MIPSInst_OPCODE(inst)) {
+	case spec_op:
+		err = mipsr2_find_op_func(regs, inst, spec_op_table);
+		if (err < 0) {
+			/* FPU instruction under JR */
+			regs->cp0_cause |= CAUSEF_BD;
+			goto fpu_emul;
+		}
+		break;
+	case spec2_op:
+		err = mipsr2_find_op_func(regs, inst, spec2_op_table);
+		break;
+	case bcond_op:
+		rt = MIPSInst_RT(inst);
+		rs = MIPSInst_RS(inst);
+		switch (rt) {
+		case tgei_op:
+			if ((long)regs->regs[rs] >= MIPSInst_SIMM(inst))
+				do_trap_or_bp(regs, 0, "TGEI");
+
+			MIPS_R2_STATS(traps);
+
+			break;
+		case tgeiu_op:
+			if (regs->regs[rs] >= MIPSInst_UIMM(inst))
+				do_trap_or_bp(regs, 0, "TGEIU");
+
+			MIPS_R2_STATS(traps);
+
+			break;
+		case tlti_op:
+			if ((long)regs->regs[rs] < MIPSInst_SIMM(inst))
+				do_trap_or_bp(regs, 0, "TLTI");
+
+			MIPS_R2_STATS(traps);
+
+			break;
+		case tltiu_op:
+			if (regs->regs[rs] < MIPSInst_UIMM(inst))
+				do_trap_or_bp(regs, 0, "TLTIU");
+
+			MIPS_R2_STATS(traps);
+
+			break;
+		case teqi_op:
+			if (regs->regs[rs] == MIPSInst_SIMM(inst))
+				do_trap_or_bp(regs, 0, "TEQI");
+
+			MIPS_R2_STATS(traps);
+
+			break;
+		case tnei_op:
+			if (regs->regs[rs] != MIPSInst_SIMM(inst))
+				do_trap_or_bp(regs, 0, "TNEI");
+
+			MIPS_R2_STATS(traps);
+
+			break;
+		case bltzl_op:
+		case bgezl_op:
+		case bltzall_op:
+		case bgezall_op:
+			if (delay_slot(regs)) {
+				err = SIGILL;
+				break;
+			}
+			regs->regs[31] = r31;
+			regs->cp0_epc = epc;
+			err = __compute_return_epc(regs);
+			if (err < 0)
+				return SIGEMT;
+			if (err != BRANCH_LIKELY_TAKEN)
+				break;
+			cpc = regs->cp0_epc;
+			nepc = epc + 4;
+			err = __get_user(nir, (u32 __user *)nepc);
+			if (err) {
+				err = SIGSEGV;
+				break;
+			}
+			/*
+			 * This will probably be optimized away when
+			 * CONFIG_DEBUG_FS is not enabled
+			 */
+			switch (rt) {
+			case bltzl_op:
+				MIPS_R2BR_STATS(bltzl);
+				break;
+			case bgezl_op:
+				MIPS_R2BR_STATS(bgezl);
+				break;
+			case bltzall_op:
+				MIPS_R2BR_STATS(bltzall);
+				break;
+			case bgezall_op:
+				MIPS_R2BR_STATS(bgezall);
+				break;
+			}
+
+			switch (MIPSInst_OPCODE(nir)) {
+			case cop1_op:
+			case cop1x_op:
+			case lwc1_op:
+			case swc1_op:
+				regs->cp0_cause |= CAUSEF_BD;
+				goto fpu_emul;
+			}
+			if (nir) {
+				err = mipsr6_emul(regs, nir);
+				if (err > 0) {
+					err = mips_dsemul(regs, nir, cpc);
+					if (err == SIGILL)
+						err = SIGEMT;
+					MIPS_R2_STATS(dsemul);
+				}
+			}
+			break;
+		case bltzal_op:
+		case bgezal_op:
+			if (delay_slot(regs)) {
+				err = SIGILL;
+				break;
+			}
+			regs->regs[31] = r31;
+			regs->cp0_epc = epc;
+			err = __compute_return_epc(regs);
+			if (err < 0)
+				return SIGEMT;
+			cpc = regs->cp0_epc;
+			nepc = epc + 4;
+			err = __get_user(nir, (u32 __user *)nepc);
+			if (err) {
+				err = SIGSEGV;
+				break;
+			}
+			/*
+			 * This will probably be optimized away when
+			 * CONFIG_DEBUG_FS is not enabled
+			 */
+			switch (rt) {
+			case bltzal_op:
+				MIPS_R2BR_STATS(bltzal);
+				break;
+			case bgezal_op:
+				MIPS_R2BR_STATS(bgezal);
+				break;
+			}
+
+			switch (MIPSInst_OPCODE(nir)) {
+			case cop1_op:
+			case cop1x_op:
+			case lwc1_op:
+			case swc1_op:
+				regs->cp0_cause |= CAUSEF_BD;
+				goto fpu_emul;
+			}
+			if (nir) {
+				err = mipsr6_emul(regs, nir);
+				if (err > 0) {
+					err = mips_dsemul(regs, nir, cpc);
+					if (err == SIGILL)
+						err = SIGEMT;
+					MIPS_R2_STATS(dsemul);
+				}
+			}
+			break;
+		default:
+			regs->regs[31] = r31;
+			regs->cp0_epc = epc;
+			err = SIGILL;
+			break;
+		}
+		break;
+
+	case beql_op:
+	case bnel_op:
+	case blezl_op:
+	case bgtzl_op:
+		if (delay_slot(regs)) {
+			err = SIGILL;
+			break;
+		}
+		regs->regs[31] = r31;
+		regs->cp0_epc = epc;
+		err = __compute_return_epc(regs);
+		if (err < 0)
+			return SIGEMT;
+		if (err != BRANCH_LIKELY_TAKEN)
+			break;
+		cpc = regs->cp0_epc;
+		nepc = epc + 4;
+		err = __get_user(nir, (u32 __user *)nepc);
+		if (err) {
+			err = SIGSEGV;
+			break;
+		}
+		/*
+		 * This will probably be optimized away when
+		 * CONFIG_DEBUG_FS is not enabled
+		 */
+		switch (MIPSInst_OPCODE(inst)) {
+		case beql_op:
+			MIPS_R2BR_STATS(beql);
+			break;
+		case bnel_op:
+			MIPS_R2BR_STATS(bnel);
+			break;
+		case blezl_op:
+			MIPS_R2BR_STATS(blezl);
+			break;
+		case bgtzl_op:
+			MIPS_R2BR_STATS(bgtzl);
+			break;
+		}
+
+		switch (MIPSInst_OPCODE(nir)) {
+		case cop1_op:
+		case cop1x_op:
+		case lwc1_op:
+		case swc1_op:
+			regs->cp0_cause |= CAUSEF_BD;
+			goto fpu_emul;
+		}
+		if (nir) {
+			err = mipsr6_emul(regs, nir);
+			if (err > 0) {
+				err = mips_dsemul(regs, nir, cpc);
+				if (err == SIGILL)
+					err = SIGEMT;
+				MIPS_R2_STATS(dsemul);
+			}
+		}
+		break;
+	case lwc1_op:
+	case swc1_op:
+	case cop1_op:
+	case cop1x_op:
+fpu_emul:
+		regs->regs[31] = r31;
+		regs->cp0_epc = epc;
+		if (!used_math()) {     /* First time FPU user.  */
+			err = init_fpu();
+			set_used_math();
+		}
+		lose_fpu(1);    /* Save FPU state for the emulator. */
+
+		err = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 0,
+					       &fault_addr);
+		*fcr31 = current->thread.fpu.fcr31;
+
+		/*
+		 * We can't allow the emulated instruction to leave any of
+		 * the cause bits set in $fcr31.
+		 */
+		current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+
+		/*
+		 * this is a tricky issue - lose_fpu() uses LL/SC atomics
+		 * if FPU is owned and effectively cancels user level LL/SC.
+		 * So, it could be logical to don't restore FPU ownership here.
+		 * But the sequence of multiple FPU instructions is much much
+		 * more often than LL-FPU-SC and I prefer loop here until
+		 * next scheduler cycle cancels FPU ownership
+		 */
+		own_fpu(1);	/* Restore FPU state. */
+
+		if (err)
+			current->thread.cp0_baduaddr = (unsigned long)fault_addr;
+
+		MIPS_R2_STATS(fpus);
+
+		break;
+
+	case lwl_op:
+		rt = regs->regs[MIPSInst_RT(inst)];
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (!access_ok(VERIFY_READ, vaddr, 4)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGSEGV;
+			break;
+		}
+		__asm__ __volatile__(
+			"	.set	push\n"
+			"	.set	reorder\n"
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+			"1:"	LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 24, 8\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+			"2:"	LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 16, 8\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+			"3:"	LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 8, 8\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+			"4:"	LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 0, 8\n"
+#else /* !CONFIG_CPU_LITTLE_ENDIAN */
+			"1:"	LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 24, 8\n"
+				ADDIU	"%2, %2, 1\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+			"2:"	LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 16, 8\n"
+				ADDIU	"%2, %2, 1\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+			"3:"	LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 8, 8\n"
+				ADDIU	"%2, %2, 1\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+			"4:"	LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 0, 8\n"
+#endif /* CONFIG_CPU_LITTLE_ENDIAN */
+			"9:	sll	%0, %0, 0\n"
+			"10:\n"
+			"	.insn\n"
+			"	.section	.fixup,\"ax\"\n"
+			"8:	li	%3,%4\n"
+			"	j	10b\n"
+			"	.previous\n"
+			"	.section	__ex_table,\"a\"\n"
+			"	.word	1b,8b\n"
+			"	.word	2b,8b\n"
+			"	.word	3b,8b\n"
+			"	.word	4b,8b\n"
+			"	.previous\n"
+			"	.set	pop\n"
+			: "+&r"(rt), "=&r"(rs),
+			  "+&r"(vaddr), "+&r"(err)
+			: "i"(SIGSEGV));
+
+		if (MIPSInst_RT(inst) && !err)
+			regs->regs[MIPSInst_RT(inst)] = rt;
+
+		MIPS_R2_STATS(loads);
+
+		break;
+
+	case lwr_op:
+		rt = regs->regs[MIPSInst_RT(inst)];
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (!access_ok(VERIFY_READ, vaddr, 4)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGSEGV;
+			break;
+		}
+		__asm__ __volatile__(
+			"       .set	push\n"
+			"       .set	reorder\n"
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+			"1:"    LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 0, 8\n"
+				ADDIU	"%2, %2, 1\n"
+			"       andi	%1, %2, 0x3\n"
+			"       beq	$0, %1, 9f\n"
+			"2:"    LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 8, 8\n"
+				ADDIU	"%2, %2, 1\n"
+			"       andi	%1, %2, 0x3\n"
+			"       beq	$0, %1, 9f\n"
+			"3:"    LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 16, 8\n"
+				ADDIU	"%2, %2, 1\n"
+			"       andi	%1, %2, 0x3\n"
+			"       beq	$0, %1, 9f\n"
+			"4:"    LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 24, 8\n"
+			"       sll	%0, %0, 0\n"
+#else /* !CONFIG_CPU_LITTLE_ENDIAN */
+			"1:"    LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 0, 8\n"
+			"       andi	%1, %2, 0x3\n"
+			"       beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+			"2:"    LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 8, 8\n"
+			"       andi	%1, %2, 0x3\n"
+			"       beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+			"3:"    LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 16, 8\n"
+			"       andi	%1, %2, 0x3\n"
+			"       beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+			"4:"    LB	"%1, 0(%2)\n"
+				INS	"%0, %1, 24, 8\n"
+			"       sll	%0, %0, 0\n"
+#endif /* CONFIG_CPU_LITTLE_ENDIAN */
+			"9:\n"
+			"10:\n"
+			"	.insn\n"
+			"	.section	.fixup,\"ax\"\n"
+			"8:	li	%3,%4\n"
+			"	j	10b\n"
+			"       .previous\n"
+			"	.section	__ex_table,\"a\"\n"
+			"	.word	1b,8b\n"
+			"	.word	2b,8b\n"
+			"	.word	3b,8b\n"
+			"	.word	4b,8b\n"
+			"	.previous\n"
+			"	.set	pop\n"
+			: "+&r"(rt), "=&r"(rs),
+			  "+&r"(vaddr), "+&r"(err)
+			: "i"(SIGSEGV));
+		if (MIPSInst_RT(inst) && !err)
+			regs->regs[MIPSInst_RT(inst)] = rt;
+
+		MIPS_R2_STATS(loads);
+
+		break;
+
+	case swl_op:
+		rt = regs->regs[MIPSInst_RT(inst)];
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (!access_ok(VERIFY_WRITE, vaddr, 4)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGSEGV;
+			break;
+		}
+		__asm__ __volatile__(
+			"	.set	push\n"
+			"	.set	reorder\n"
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+				EXT	"%1, %0, 24, 8\n"
+			"1:"	SB	"%1, 0(%2)\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+				EXT	"%1, %0, 16, 8\n"
+			"2:"	SB	"%1, 0(%2)\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+				EXT	"%1, %0, 8, 8\n"
+			"3:"	SB	"%1, 0(%2)\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+				EXT	"%1, %0, 0, 8\n"
+			"4:"	SB	"%1, 0(%2)\n"
+#else /* !CONFIG_CPU_LITTLE_ENDIAN */
+				EXT	"%1, %0, 24, 8\n"
+			"1:"	SB	"%1, 0(%2)\n"
+				ADDIU	"%2, %2, 1\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				EXT	"%1, %0, 16, 8\n"
+			"2:"	SB	"%1, 0(%2)\n"
+				ADDIU	"%2, %2, 1\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				EXT	"%1, %0, 8, 8\n"
+			"3:"	SB	"%1, 0(%2)\n"
+				ADDIU	"%2, %2, 1\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				EXT	"%1, %0, 0, 8\n"
+			"4:"	SB	"%1, 0(%2)\n"
+#endif /* CONFIG_CPU_LITTLE_ENDIAN */
+			"9:\n"
+			"	.insn\n"
+			"       .section        .fixup,\"ax\"\n"
+			"8:	li	%3,%4\n"
+			"	j	9b\n"
+			"	.previous\n"
+			"	.section        __ex_table,\"a\"\n"
+			"	.word	1b,8b\n"
+			"	.word	2b,8b\n"
+			"	.word	3b,8b\n"
+			"	.word	4b,8b\n"
+			"	.previous\n"
+			"	.set	pop\n"
+			: "+&r"(rt), "=&r"(rs),
+			  "+&r"(vaddr), "+&r"(err)
+			: "i"(SIGSEGV)
+			: "memory");
+
+		MIPS_R2_STATS(stores);
+
+		break;
+
+	case swr_op:
+		rt = regs->regs[MIPSInst_RT(inst)];
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (!access_ok(VERIFY_WRITE, vaddr, 4)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGSEGV;
+			break;
+		}
+		__asm__ __volatile__(
+			"	.set	push\n"
+			"	.set	reorder\n"
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+				EXT	"%1, %0, 0, 8\n"
+			"1:"	SB	"%1, 0(%2)\n"
+				ADDIU	"%2, %2, 1\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				EXT	"%1, %0, 8, 8\n"
+			"2:"	SB	"%1, 0(%2)\n"
+				ADDIU	"%2, %2, 1\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				EXT	"%1, %0, 16, 8\n"
+			"3:"	SB	"%1, 0(%2)\n"
+				ADDIU	"%2, %2, 1\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				EXT	"%1, %0, 24, 8\n"
+			"4:"	SB	"%1, 0(%2)\n"
+#else /* !CONFIG_CPU_LITTLE_ENDIAN */
+				EXT	"%1, %0, 0, 8\n"
+			"1:"	SB	"%1, 0(%2)\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+				EXT	"%1, %0, 8, 8\n"
+			"2:"	SB	"%1, 0(%2)\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+				EXT	"%1, %0, 16, 8\n"
+			"3:"	SB	"%1, 0(%2)\n"
+			"	andi	%1, %2, 0x3\n"
+			"	beq	$0, %1, 9f\n"
+				ADDIU	"%2, %2, -1\n"
+				EXT	"%1, %0, 24, 8\n"
+			"4:"	SB	"%1, 0(%2)\n"
+#endif /* CONFIG_CPU_LITTLE_ENDIAN */
+			"9:\n"
+			"	.insn\n"
+			"	.section        .fixup,\"ax\"\n"
+			"8:	li	%3,%4\n"
+			"	j	9b\n"
+			"	.previous\n"
+			"	.section        __ex_table,\"a\"\n"
+			"	.word	1b,8b\n"
+			"	.word	2b,8b\n"
+			"	.word	3b,8b\n"
+			"	.word	4b,8b\n"
+			"	.previous\n"
+			"	.set	pop\n"
+			: "+&r"(rt), "=&r"(rs),
+			  "+&r"(vaddr), "+&r"(err)
+			: "i"(SIGSEGV)
+			: "memory");
+
+		MIPS_R2_STATS(stores);
+
+		break;
+
+	case ldl_op:
+		if (config_enabled(CONFIG_32BIT)) {
+		    err = SIGILL;
+		    break;
+		}
+
+		rt = regs->regs[MIPSInst_RT(inst)];
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (!access_ok(VERIFY_READ, vaddr, 8)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGSEGV;
+			break;
+		}
+		__asm__ __volatile__(
+			"	.set    push\n"
+			"	.set    reorder\n"
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+			"1:	lb	%1, 0(%2)\n"
+			"	dinsu	%0, %1, 56, 8\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"2:	lb	%1, 0(%2)\n"
+			"	dinsu	%0, %1, 48, 8\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"3:	lb	%1, 0(%2)\n"
+			"	dinsu	%0, %1, 40, 8\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"4:	lb	%1, 0(%2)\n"
+			"	dinsu	%0, %1, 32, 8\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"5:	lb	%1, 0(%2)\n"
+			"	dins	%0, %1, 24, 8\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"6:	lb	%1, 0(%2)\n"
+			"	dins	%0, %1, 16, 8\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"7:	lb	%1, 0(%2)\n"
+			"	dins	%0, %1, 8, 8\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"0:	lb	%1, 0(%2)\n"
+			"	dins	%0, %1, 0, 8\n"
+#else /* !CONFIG_CPU_LITTLE_ENDIAN */
+			"1:	lb	%1, 0(%2)\n"
+			"	dinsu	%0, %1, 56, 8\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"2:	lb	%1, 0(%2)\n"
+			"	dinsu	%0, %1, 48, 8\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"3:	lb	%1, 0(%2)\n"
+			"	dinsu	%0, %1, 40, 8\n"
+			"	daddiu  %2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"4:	lb	%1, 0(%2)\n"
+			"	dinsu	%0, %1, 32, 8\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"5:	lb	%1, 0(%2)\n"
+			"	dins	%0, %1, 24, 8\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"6:	lb	%1, 0(%2)\n"
+			"	dins	%0, %1, 16, 8\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"7:	lb	%1, 0(%2)\n"
+			"	dins	%0, %1, 8, 8\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"0:	lb	%1, 0(%2)\n"
+			"	dins	%0, %1, 0, 8\n"
+#endif /* CONFIG_CPU_LITTLE_ENDIAN */
+			"9:\n"
+			"	.insn\n"
+			"	.section        .fixup,\"ax\"\n"
+			"8:	li	%3,%4\n"
+			"	j	9b\n"
+			"	.previous\n"
+			"	.section        __ex_table,\"a\"\n"
+			"	.word	1b,8b\n"
+			"	.word	2b,8b\n"
+			"	.word	3b,8b\n"
+			"	.word	4b,8b\n"
+			"	.word	5b,8b\n"
+			"	.word	6b,8b\n"
+			"	.word	7b,8b\n"
+			"	.word	0b,8b\n"
+			"	.previous\n"
+			"	.set	pop\n"
+			: "+&r"(rt), "=&r"(rs),
+			  "+&r"(vaddr), "+&r"(err)
+			: "i"(SIGSEGV));
+		if (MIPSInst_RT(inst) && !err)
+			regs->regs[MIPSInst_RT(inst)] = rt;
+
+		MIPS_R2_STATS(loads);
+		break;
+
+	case ldr_op:
+		if (config_enabled(CONFIG_32BIT)) {
+		    err = SIGILL;
+		    break;
+		}
+
+		rt = regs->regs[MIPSInst_RT(inst)];
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (!access_ok(VERIFY_READ, vaddr, 8)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGSEGV;
+			break;
+		}
+		__asm__ __volatile__(
+			"	.set    push\n"
+			"	.set    reorder\n"
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+			"1:	lb      %1, 0(%2)\n"
+			"	dins   %0, %1, 0, 8\n"
+			"	daddiu  %2, %2, 1\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"2:	lb      %1, 0(%2)\n"
+			"	dins   %0, %1, 8, 8\n"
+			"	daddiu  %2, %2, 1\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"3:	lb      %1, 0(%2)\n"
+			"	dins   %0, %1, 16, 8\n"
+			"	daddiu  %2, %2, 1\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"4:	lb      %1, 0(%2)\n"
+			"	dins   %0, %1, 24, 8\n"
+			"	daddiu  %2, %2, 1\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"5:	lb      %1, 0(%2)\n"
+			"	dinsu    %0, %1, 32, 8\n"
+			"	daddiu  %2, %2, 1\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"6:	lb      %1, 0(%2)\n"
+			"	dinsu    %0, %1, 40, 8\n"
+			"	daddiu  %2, %2, 1\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"7:	lb      %1, 0(%2)\n"
+			"	dinsu    %0, %1, 48, 8\n"
+			"	daddiu  %2, %2, 1\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"0:	lb      %1, 0(%2)\n"
+			"	dinsu    %0, %1, 56, 8\n"
+#else /* !CONFIG_CPU_LITTLE_ENDIAN */
+			"1:	lb      %1, 0(%2)\n"
+			"	dins   %0, %1, 0, 8\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"	daddiu  %2, %2, -1\n"
+			"2:	lb      %1, 0(%2)\n"
+			"	dins   %0, %1, 8, 8\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"	daddiu  %2, %2, -1\n"
+			"3:	lb      %1, 0(%2)\n"
+			"	dins   %0, %1, 16, 8\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"	daddiu  %2, %2, -1\n"
+			"4:	lb      %1, 0(%2)\n"
+			"	dins   %0, %1, 24, 8\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"	daddiu  %2, %2, -1\n"
+			"5:	lb      %1, 0(%2)\n"
+			"	dinsu    %0, %1, 32, 8\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"	daddiu  %2, %2, -1\n"
+			"6:	lb      %1, 0(%2)\n"
+			"	dinsu    %0, %1, 40, 8\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"	daddiu  %2, %2, -1\n"
+			"7:	lb      %1, 0(%2)\n"
+			"	dinsu    %0, %1, 48, 8\n"
+			"	andi    %1, %2, 0x7\n"
+			"	beq     $0, %1, 9f\n"
+			"	daddiu  %2, %2, -1\n"
+			"0:	lb      %1, 0(%2)\n"
+			"	dinsu    %0, %1, 56, 8\n"
+#endif /* CONFIG_CPU_LITTLE_ENDIAN */
+			"9:\n"
+			"	.insn\n"
+			"	.section        .fixup,\"ax\"\n"
+			"8:	li     %3,%4\n"
+			"	j      9b\n"
+			"	.previous\n"
+			"	.section        __ex_table,\"a\"\n"
+			"	.word  1b,8b\n"
+			"	.word  2b,8b\n"
+			"	.word  3b,8b\n"
+			"	.word  4b,8b\n"
+			"	.word  5b,8b\n"
+			"	.word  6b,8b\n"
+			"	.word  7b,8b\n"
+			"	.word  0b,8b\n"
+			"	.previous\n"
+			"	.set    pop\n"
+			: "+&r"(rt), "=&r"(rs),
+			  "+&r"(vaddr), "+&r"(err)
+			: "i"(SIGSEGV));
+		if (MIPSInst_RT(inst) && !err)
+			regs->regs[MIPSInst_RT(inst)] = rt;
+
+		MIPS_R2_STATS(loads);
+		break;
+
+	case sdl_op:
+		if (config_enabled(CONFIG_32BIT)) {
+		    err = SIGILL;
+		    break;
+		}
+
+		rt = regs->regs[MIPSInst_RT(inst)];
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (!access_ok(VERIFY_WRITE, vaddr, 8)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGSEGV;
+			break;
+		}
+		__asm__ __volatile__(
+			"	.set	push\n"
+			"	.set	reorder\n"
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+			"	dextu	%1, %0, 56, 8\n"
+			"1:	sb	%1, 0(%2)\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"	dextu	%1, %0, 48, 8\n"
+			"2:	sb	%1, 0(%2)\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"	dextu	%1, %0, 40, 8\n"
+			"3:	sb	%1, 0(%2)\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"	dextu	%1, %0, 32, 8\n"
+			"4:	sb	%1, 0(%2)\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"	dext	%1, %0, 24, 8\n"
+			"5:	sb	%1, 0(%2)\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"	dext	%1, %0, 16, 8\n"
+			"6:	sb	%1, 0(%2)\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"	dext	%1, %0, 8, 8\n"
+			"7:	sb	%1, 0(%2)\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	daddiu	%2, %2, -1\n"
+			"	dext	%1, %0, 0, 8\n"
+			"0:	sb	%1, 0(%2)\n"
+#else /* !CONFIG_CPU_LITTLE_ENDIAN */
+			"	dextu	%1, %0, 56, 8\n"
+			"1:	sb	%1, 0(%2)\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	dextu	%1, %0, 48, 8\n"
+			"2:	sb	%1, 0(%2)\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	dextu	%1, %0, 40, 8\n"
+			"3:	sb	%1, 0(%2)\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	dextu	%1, %0, 32, 8\n"
+			"4:	sb	%1, 0(%2)\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	dext	%1, %0, 24, 8\n"
+			"5:	sb	%1, 0(%2)\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	dext	%1, %0, 16, 8\n"
+			"6:	sb	%1, 0(%2)\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	dext	%1, %0, 8, 8\n"
+			"7:	sb	%1, 0(%2)\n"
+			"	daddiu	%2, %2, 1\n"
+			"	andi	%1, %2, 0x7\n"
+			"	beq	$0, %1, 9f\n"
+			"	dext	%1, %0, 0, 8\n"
+			"0:	sb	%1, 0(%2)\n"
+#endif /* CONFIG_CPU_LITTLE_ENDIAN */
+			"9:\n"
+			"	.insn\n"
+			"	.section        .fixup,\"ax\"\n"
+			"8:	li	%3,%4\n"
+			"	j	9b\n"
+			"	.previous\n"
+			"	.section        __ex_table,\"a\"\n"
+			"	.word	1b,8b\n"
+			"	.word	2b,8b\n"
+			"	.word	3b,8b\n"
+			"	.word	4b,8b\n"
+			"	.word	5b,8b\n"
+			"	.word	6b,8b\n"
+			"	.word	7b,8b\n"
+			"	.word	0b,8b\n"
+			"	.previous\n"
+			"	.set	pop\n"
+			: "+&r"(rt), "=&r"(rs),
+			  "+&r"(vaddr), "+&r"(err)
+			: "i"(SIGSEGV)
+			: "memory");
+
+		MIPS_R2_STATS(stores);
+		break;
+
+	case sdr_op:
+		if (config_enabled(CONFIG_32BIT)) {
+		    err = SIGILL;
+		    break;
+		}
+
+		rt = regs->regs[MIPSInst_RT(inst)];
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (!access_ok(VERIFY_WRITE, vaddr, 8)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGSEGV;
+			break;
+		}
+		__asm__ __volatile__(
+			"       .set	push\n"
+			"       .set	reorder\n"
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+			"       dext	%1, %0, 0, 8\n"
+			"1:     sb	%1, 0(%2)\n"
+			"       daddiu	%2, %2, 1\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       dext	%1, %0, 8, 8\n"
+			"2:     sb	%1, 0(%2)\n"
+			"       daddiu	%2, %2, 1\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       dext	%1, %0, 16, 8\n"
+			"3:     sb	%1, 0(%2)\n"
+			"       daddiu	%2, %2, 1\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       dext	%1, %0, 24, 8\n"
+			"4:     sb	%1, 0(%2)\n"
+			"       daddiu	%2, %2, 1\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       dextu	%1, %0, 32, 8\n"
+			"5:     sb	%1, 0(%2)\n"
+			"       daddiu	%2, %2, 1\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       dextu	%1, %0, 40, 8\n"
+			"6:     sb	%1, 0(%2)\n"
+			"       daddiu	%2, %2, 1\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       dextu	%1, %0, 48, 8\n"
+			"7:     sb	%1, 0(%2)\n"
+			"       daddiu	%2, %2, 1\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       dextu	%1, %0, 56, 8\n"
+			"0:     sb	%1, 0(%2)\n"
+#else /* !CONFIG_CPU_LITTLE_ENDIAN */
+			"       dext	%1, %0, 0, 8\n"
+			"1:     sb	%1, 0(%2)\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       daddiu	%2, %2, -1\n"
+			"       dext	%1, %0, 8, 8\n"
+			"2:     sb	%1, 0(%2)\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       daddiu	%2, %2, -1\n"
+			"       dext	%1, %0, 16, 8\n"
+			"3:     sb	%1, 0(%2)\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       daddiu	%2, %2, -1\n"
+			"       dext	%1, %0, 24, 8\n"
+			"4:     sb	%1, 0(%2)\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       daddiu	%2, %2, -1\n"
+			"       dextu	%1, %0, 32, 8\n"
+			"5:     sb	%1, 0(%2)\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       daddiu	%2, %2, -1\n"
+			"       dextu	%1, %0, 40, 8\n"
+			"6:     sb	%1, 0(%2)\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       daddiu	%2, %2, -1\n"
+			"       dextu	%1, %0, 48, 8\n"
+			"7:     sb	%1, 0(%2)\n"
+			"       andi	%1, %2, 0x7\n"
+			"       beq	$0, %1, 9f\n"
+			"       daddiu	%2, %2, -1\n"
+			"       dextu	%1, %0, 56, 8\n"
+			"0:     sb	%1, 0(%2)\n"
+#endif /* CONFIG_CPU_LITTLE_ENDIAN */
+			"9:\n"
+			"       .insn\n"
+			"       .section        .fixup,\"ax\"\n"
+			"8:     li	%3,%4\n"
+			"       j	9b\n"
+			"       .previous\n"
+			"       .section        __ex_table,\"a\"\n"
+			"       .word	1b,8b\n"
+			"       .word	2b,8b\n"
+			"       .word	3b,8b\n"
+			"       .word	4b,8b\n"
+			"       .word	5b,8b\n"
+			"       .word	6b,8b\n"
+			"       .word	7b,8b\n"
+			"       .word	0b,8b\n"
+			"       .previous\n"
+			"       .set	pop\n"
+			: "+&r"(rt), "=&r"(rs),
+			  "+&r"(vaddr), "+&r"(err)
+			: "i"(SIGSEGV)
+			: "memory");
+
+		MIPS_R2_STATS(stores);
+
+		break;
+	case ll_op:
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (vaddr & 0x3) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGBUS;
+			break;
+		}
+		if (!access_ok(VERIFY_READ, vaddr, 4)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGBUS;
+			break;
+		}
+
+		if (!cpu_has_rw_llb) {
+			/*
+			 * An LL/SC block can't be safely emulated without
+			 * a Config5/LLB availability. So it's probably time to
+			 * kill our process before things get any worse. This is
+			 * because Config5/LLB allows us to use ERETNC so that
+			 * the LLAddr/LLB bit is not cleared when we return from
+			 * an exception. MIPS R2 LL/SC instructions trap with an
+			 * RI exception so once we emulate them here, we return
+			 * back to userland with ERETNC. That preserves the
+			 * LLAddr/LLB so the subsequent SC instruction will
+			 * succeed preserving the atomic semantics of the LL/SC
+			 * block. Without that, there is no safe way to emulate
+			 * an LL/SC block in MIPSR2 userland.
+			 */
+			pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");
+			err = SIGKILL;
+			break;
+		}
+
+		__asm__ __volatile__(
+			"1:\n"
+			"ll	%0, 0(%2)\n"
+			"2:\n"
+			".insn\n"
+			".section        .fixup,\"ax\"\n"
+			"3:\n"
+			"li	%1, %3\n"
+			"j	2b\n"
+			".previous\n"
+			".section        __ex_table,\"a\"\n"
+			".word  1b, 3b\n"
+			".previous\n"
+			: "=&r"(res), "+&r"(err)
+			: "r"(vaddr), "i"(SIGSEGV)
+			: "memory");
+
+		if (MIPSInst_RT(inst) && !err)
+			regs->regs[MIPSInst_RT(inst)] = res;
+		MIPS_R2_STATS(llsc);
+
+		break;
+
+	case sc_op:
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (vaddr & 0x3) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGBUS;
+			break;
+		}
+		if (!access_ok(VERIFY_WRITE, vaddr, 4)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGBUS;
+			break;
+		}
+
+		if (!cpu_has_rw_llb) {
+			/*
+			 * An LL/SC block can't be safely emulated without
+			 * a Config5/LLB availability. So it's probably time to
+			 * kill our process before things get any worse. This is
+			 * because Config5/LLB allows us to use ERETNC so that
+			 * the LLAddr/LLB bit is not cleared when we return from
+			 * an exception. MIPS R2 LL/SC instructions trap with an
+			 * RI exception so once we emulate them here, we return
+			 * back to userland with ERETNC. That preserves the
+			 * LLAddr/LLB so the subsequent SC instruction will
+			 * succeed preserving the atomic semantics of the LL/SC
+			 * block. Without that, there is no safe way to emulate
+			 * an LL/SC block in MIPSR2 userland.
+			 */
+			pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");
+			err = SIGKILL;
+			break;
+		}
+
+		res = regs->regs[MIPSInst_RT(inst)];
+
+		__asm__ __volatile__(
+			"1:\n"
+			"sc	%0, 0(%2)\n"
+			"2:\n"
+			".insn\n"
+			".section        .fixup,\"ax\"\n"
+			"3:\n"
+			"li	%1, %3\n"
+			"j	2b\n"
+			".previous\n"
+			".section        __ex_table,\"a\"\n"
+			".word	1b, 3b\n"
+			".previous\n"
+			: "+&r"(res), "+&r"(err)
+			: "r"(vaddr), "i"(SIGSEGV));
+
+		if (MIPSInst_RT(inst) && !err)
+			regs->regs[MIPSInst_RT(inst)] = res;
+
+		MIPS_R2_STATS(llsc);
+
+		break;
+
+	case lld_op:
+		if (config_enabled(CONFIG_32BIT)) {
+		    err = SIGILL;
+		    break;
+		}
+
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (vaddr & 0x7) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGBUS;
+			break;
+		}
+		if (!access_ok(VERIFY_READ, vaddr, 8)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGBUS;
+			break;
+		}
+
+		if (!cpu_has_rw_llb) {
+			/*
+			 * An LL/SC block can't be safely emulated without
+			 * a Config5/LLB availability. So it's probably time to
+			 * kill our process before things get any worse. This is
+			 * because Config5/LLB allows us to use ERETNC so that
+			 * the LLAddr/LLB bit is not cleared when we return from
+			 * an exception. MIPS R2 LL/SC instructions trap with an
+			 * RI exception so once we emulate them here, we return
+			 * back to userland with ERETNC. That preserves the
+			 * LLAddr/LLB so the subsequent SC instruction will
+			 * succeed preserving the atomic semantics of the LL/SC
+			 * block. Without that, there is no safe way to emulate
+			 * an LL/SC block in MIPSR2 userland.
+			 */
+			pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");
+			err = SIGKILL;
+			break;
+		}
+
+		__asm__ __volatile__(
+			"1:\n"
+			"lld	%0, 0(%2)\n"
+			"2:\n"
+			".insn\n"
+			".section        .fixup,\"ax\"\n"
+			"3:\n"
+			"li	%1, %3\n"
+			"j	2b\n"
+			".previous\n"
+			".section        __ex_table,\"a\"\n"
+			".word  1b, 3b\n"
+			".previous\n"
+			: "=&r"(res), "+&r"(err)
+			: "r"(vaddr), "i"(SIGSEGV)
+			: "memory");
+		if (MIPSInst_RT(inst) && !err)
+			regs->regs[MIPSInst_RT(inst)] = res;
+
+		MIPS_R2_STATS(llsc);
+
+		break;
+
+	case scd_op:
+		if (config_enabled(CONFIG_32BIT)) {
+		    err = SIGILL;
+		    break;
+		}
+
+		vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
+		if (vaddr & 0x7) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGBUS;
+			break;
+		}
+		if (!access_ok(VERIFY_WRITE, vaddr, 8)) {
+			current->thread.cp0_baduaddr = vaddr;
+			err = SIGBUS;
+			break;
+		}
+
+		if (!cpu_has_rw_llb) {
+			/*
+			 * An LL/SC block can't be safely emulated without
+			 * a Config5/LLB availability. So it's probably time to
+			 * kill our process before things get any worse. This is
+			 * because Config5/LLB allows us to use ERETNC so that
+			 * the LLAddr/LLB bit is not cleared when we return from
+			 * an exception. MIPS R2 LL/SC instructions trap with an
+			 * RI exception so once we emulate them here, we return
+			 * back to userland with ERETNC. That preserves the
+			 * LLAddr/LLB so the subsequent SC instruction will
+			 * succeed preserving the atomic semantics of the LL/SC
+			 * block. Without that, there is no safe way to emulate
+			 * an LL/SC block in MIPSR2 userland.
+			 */
+			pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");
+			err = SIGKILL;
+			break;
+		}
+
+		res = regs->regs[MIPSInst_RT(inst)];
+
+		__asm__ __volatile__(
+			"1:\n"
+			"scd	%0, 0(%2)\n"
+			"2:\n"
+			".insn\n"
+			".section        .fixup,\"ax\"\n"
+			"3:\n"
+			"li	%1, %3\n"
+			"j	2b\n"
+			".previous\n"
+			".section        __ex_table,\"a\"\n"
+			".word	1b, 3b\n"
+			".previous\n"
+			: "+&r"(res), "+&r"(err)
+			: "r"(vaddr), "i"(SIGSEGV));
+
+		if (MIPSInst_RT(inst) && !err)
+			regs->regs[MIPSInst_RT(inst)] = res;
+
+		MIPS_R2_STATS(llsc);
+
+		break;
+	case pref_op:
+		/* skip it */
+		break;
+	default:
+		err = SIGILL;
+	}
+
+	/*
+	 * Lets not return to userland just yet. It's constly and
+	 * it's likely we have more R2 instructions to emulate
+	 */
+	if (!err && (pass++ < MIPS_R2_EMUL_TOTAL_PASS)) {
+		regs->cp0_cause &= ~CAUSEF_BD;
+		err = get_user(inst, (u32 __user *)regs->cp0_epc);
+		if (!err)
+			goto repeat;
+
+		if (err < 0)
+			err = SIGSEGV;
+	}
+
+	if (err && (err != SIGEMT)) {
+		regs->regs[31] = r31;
+		regs->cp0_epc = epc;
+	}
+
+	/* Likely a MIPS R6 compatible instruction */
+	if (pass && (err == SIGILL))
+		err = 0;
+
+	return err;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+static int mipsr2_stats_show(struct seq_file *s, void *unused)
+{
+
+	seq_printf(s, "Instruction\tTotal\tBDslot\n------------------------------\n");
+	seq_printf(s, "movs\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.movs),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.movs));
+	seq_printf(s, "hilo\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.hilo),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.hilo));
+	seq_printf(s, "muls\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.muls),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.muls));
+	seq_printf(s, "divs\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.divs),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.divs));
+	seq_printf(s, "dsps\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.dsps),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.dsps));
+	seq_printf(s, "bops\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.bops),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.bops));
+	seq_printf(s, "traps\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.traps),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.traps));
+	seq_printf(s, "fpus\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.fpus),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.fpus));
+	seq_printf(s, "loads\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.loads),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.loads));
+	seq_printf(s, "stores\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.stores),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.stores));
+	seq_printf(s, "llsc\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.llsc),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.llsc));
+	seq_printf(s, "dsemul\t\t%ld\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2emustats.dsemul),
+		   (unsigned long)__this_cpu_read(mipsr2bdemustats.dsemul));
+	seq_printf(s, "jr\t\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2bremustats.jrs));
+	seq_printf(s, "bltzl\t\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2bremustats.bltzl));
+	seq_printf(s, "bgezl\t\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2bremustats.bgezl));
+	seq_printf(s, "bltzll\t\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2bremustats.bltzll));
+	seq_printf(s, "bgezll\t\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2bremustats.bgezll));
+	seq_printf(s, "bltzal\t\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2bremustats.bltzal));
+	seq_printf(s, "bgezal\t\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2bremustats.bgezal));
+	seq_printf(s, "beql\t\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2bremustats.beql));
+	seq_printf(s, "bnel\t\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2bremustats.bnel));
+	seq_printf(s, "blezl\t\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2bremustats.blezl));
+	seq_printf(s, "bgtzl\t\t%ld\n",
+		   (unsigned long)__this_cpu_read(mipsr2bremustats.bgtzl));
+
+	return 0;
+}
+
+static int mipsr2_stats_clear_show(struct seq_file *s, void *unused)
+{
+	mipsr2_stats_show(s, unused);
+
+	__this_cpu_write((mipsr2emustats).movs, 0);
+	__this_cpu_write((mipsr2bdemustats).movs, 0);
+	__this_cpu_write((mipsr2emustats).hilo, 0);
+	__this_cpu_write((mipsr2bdemustats).hilo, 0);
+	__this_cpu_write((mipsr2emustats).muls, 0);
+	__this_cpu_write((mipsr2bdemustats).muls, 0);
+	__this_cpu_write((mipsr2emustats).divs, 0);
+	__this_cpu_write((mipsr2bdemustats).divs, 0);
+	__this_cpu_write((mipsr2emustats).dsps, 0);
+	__this_cpu_write((mipsr2bdemustats).dsps, 0);
+	__this_cpu_write((mipsr2emustats).bops, 0);
+	__this_cpu_write((mipsr2bdemustats).bops, 0);
+	__this_cpu_write((mipsr2emustats).traps, 0);
+	__this_cpu_write((mipsr2bdemustats).traps, 0);
+	__this_cpu_write((mipsr2emustats).fpus, 0);
+	__this_cpu_write((mipsr2bdemustats).fpus, 0);
+	__this_cpu_write((mipsr2emustats).loads, 0);
+	__this_cpu_write((mipsr2bdemustats).loads, 0);
+	__this_cpu_write((mipsr2emustats).stores, 0);
+	__this_cpu_write((mipsr2bdemustats).stores, 0);
+	__this_cpu_write((mipsr2emustats).llsc, 0);
+	__this_cpu_write((mipsr2bdemustats).llsc, 0);
+	__this_cpu_write((mipsr2emustats).dsemul, 0);
+	__this_cpu_write((mipsr2bdemustats).dsemul, 0);
+	__this_cpu_write((mipsr2bremustats).jrs, 0);
+	__this_cpu_write((mipsr2bremustats).bltzl, 0);
+	__this_cpu_write((mipsr2bremustats).bgezl, 0);
+	__this_cpu_write((mipsr2bremustats).bltzll, 0);
+	__this_cpu_write((mipsr2bremustats).bgezll, 0);
+	__this_cpu_write((mipsr2bremustats).bltzal, 0);
+	__this_cpu_write((mipsr2bremustats).bgezal, 0);
+	__this_cpu_write((mipsr2bremustats).beql, 0);
+	__this_cpu_write((mipsr2bremustats).bnel, 0);
+	__this_cpu_write((mipsr2bremustats).blezl, 0);
+	__this_cpu_write((mipsr2bremustats).bgtzl, 0);
+
+	return 0;
+}
+
+static int mipsr2_stats_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mipsr2_stats_show, inode->i_private);
+}
+
+static int mipsr2_stats_clear_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mipsr2_stats_clear_show, inode->i_private);
+}
+
+static const struct file_operations mipsr2_emul_fops = {
+	.open                   = mipsr2_stats_open,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+static const struct file_operations mipsr2_clear_fops = {
+	.open                   = mipsr2_stats_clear_open,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+
+static int __init mipsr2_init_debugfs(void)
+{
+	extern struct dentry	*mips_debugfs_dir;
+	struct dentry		*mipsr2_emul;
+
+	if (!mips_debugfs_dir)
+		return -ENODEV;
+
+	mipsr2_emul = debugfs_create_file("r2_emul_stats", S_IRUGO,
+					  mips_debugfs_dir, NULL,
+					  &mipsr2_emul_fops);
+	if (!mipsr2_emul)
+		return -ENOMEM;
+
+	mipsr2_emul = debugfs_create_file("r2_emul_stats_clear", S_IRUGO,
+					  mips_debugfs_dir, NULL,
+					  &mipsr2_clear_fops);
+	if (!mipsr2_emul)
+		return -ENOMEM;
+
+	return 0;
+}
+
+device_initcall(mipsr2_init_debugfs);
+
+#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
new file mode 100644
index 000000000..291af0b5c
--- /dev/null
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -0,0 +1,92 @@
+/*
+ * Export MIPS-specific functions needed for loadable modules.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05, 12 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc.
+ */
+#include <linux/interrupt.h>
+#include <linux/export.h>
+#include <asm/checksum.h>
+#include <linux/mm.h>
+#include <asm/uaccess.h>
+#include <asm/ftrace.h>
+#include <asm/fpu.h>
+#include <asm/msa.h>
+
+extern void *__bzero(void *__s, size_t __count);
+extern long __strncpy_from_kernel_nocheck_asm(char *__to,
+					      const char *__from, long __len);
+extern long __strncpy_from_kernel_asm(char *__to, const char *__from,
+				      long __len);
+extern long __strncpy_from_user_nocheck_asm(char *__to,
+					    const char *__from, long __len);
+extern long __strncpy_from_user_asm(char *__to, const char *__from,
+				    long __len);
+extern long __strlen_kernel_asm(const char *s);
+extern long __strlen_user_asm(const char *s);
+extern long __strnlen_kernel_nocheck_asm(const char *s);
+extern long __strnlen_kernel_asm(const char *s);
+extern long __strnlen_user_nocheck_asm(const char *s);
+extern long __strnlen_user_asm(const char *s);
+
+/*
+ * Core architecture code
+ */
+EXPORT_SYMBOL_GPL(_save_fp);
+#ifdef CONFIG_CPU_HAS_MSA
+EXPORT_SYMBOL_GPL(_save_msa);
+#endif
+
+/*
+ * String functions
+ */
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+
+/*
+ * Functions that operate on entire pages.  Mostly used by memory management.
+ */
+EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
+
+/*
+ * Userspace access stuff.
+ */
+EXPORT_SYMBOL(__copy_user);
+EXPORT_SYMBOL(__copy_user_inatomic);
+#ifdef CONFIG_EVA
+EXPORT_SYMBOL(__copy_from_user_eva);
+EXPORT_SYMBOL(__copy_in_user_eva);
+EXPORT_SYMBOL(__copy_to_user_eva);
+EXPORT_SYMBOL(__copy_user_inatomic_eva);
+#endif
+EXPORT_SYMBOL(__bzero);
+EXPORT_SYMBOL(__strncpy_from_kernel_nocheck_asm);
+EXPORT_SYMBOL(__strncpy_from_kernel_asm);
+EXPORT_SYMBOL(__strncpy_from_user_nocheck_asm);
+EXPORT_SYMBOL(__strncpy_from_user_asm);
+EXPORT_SYMBOL(__strlen_kernel_asm);
+EXPORT_SYMBOL(__strlen_user_asm);
+EXPORT_SYMBOL(__strnlen_kernel_nocheck_asm);
+EXPORT_SYMBOL(__strnlen_kernel_asm);
+EXPORT_SYMBOL(__strnlen_user_nocheck_asm);
+EXPORT_SYMBOL(__strnlen_user_asm);
+
+#ifndef CONFIG_CPU_MIPSR6
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+EXPORT_SYMBOL(__csum_partial_copy_kernel);
+EXPORT_SYMBOL(__csum_partial_copy_to_user);
+EXPORT_SYMBOL(__csum_partial_copy_from_user);
+#endif
+
+EXPORT_SYMBOL(invalid_pte_table);
+#ifdef CONFIG_FUNCTION_TRACER
+/* _mcount is defined in arch/mips/kernel/mcount.S */
+EXPORT_SYMBOL(_mcount);
+#endif
diff --git a/arch/mips/kernel/mips_machine.c b/arch/mips/kernel/mips_machine.c
new file mode 100644
index 000000000..876097529
--- /dev/null
+++ b/arch/mips/kernel/mips_machine.c
@@ -0,0 +1,66 @@
+/*
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include <asm/mips_machine.h>
+#include <asm/prom.h>
+
+static struct mips_machine *mips_machine __initdata;
+
+#define for_each_machine(mach) \
+	for ((mach) = (struct mips_machine *)&__mips_machines_start; \
+	     (mach) && \
+	     (unsigned long)(mach) < (unsigned long)&__mips_machines_end; \
+	     (mach)++)
+
+__init int mips_machtype_setup(char *id)
+{
+	struct mips_machine *mach;
+
+	for_each_machine(mach) {
+		if (mach->mach_id == NULL)
+			continue;
+
+		if (strcmp(mach->mach_id, id) == 0) {
+			mips_machtype = mach->mach_type;
+			return 0;
+		}
+	}
+
+	pr_err("MIPS: no machine found for id '%s', supported machines:\n", id);
+	pr_err("%-24s %s\n", "id", "name");
+	for_each_machine(mach)
+		pr_err("%-24s %s\n", mach->mach_id, mach->mach_name);
+
+	return 1;
+}
+
+__setup("machtype=", mips_machtype_setup);
+
+__init void mips_machine_setup(void)
+{
+	struct mips_machine *mach;
+
+	for_each_machine(mach) {
+		if (mips_machtype == mach->mach_type) {
+			mips_machine = mach;
+			break;
+		}
+	}
+
+	if (!mips_machine)
+		return;
+
+	mips_set_machine_name(mips_machine->mach_name);
+
+	if (mips_machine->mach_setup)
+		mips_machine->mach_setup();
+}
diff --git a/arch/mips/kernel/module-rela.c b/arch/mips/kernel/module-rela.c
new file mode 100644
index 000000000..2b7072307
--- /dev/null
+++ b/arch/mips/kernel/module-rela.c
@@ -0,0 +1,145 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *  Copyright (C) 2001 Rusty Russell.
+ *  Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
+ *  Copyright (C) 2005 Thiemo Seufer
+ */
+
+#include <linux/elf.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/moduleloader.h>
+
+extern int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v);
+
+static int apply_r_mips_32_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location = v;
+
+	return 0;
+}
+
+static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	if (v % 4) {
+		pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
+		       me->name);
+		return -ENOEXEC;
+	}
+
+	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+		printk(KERN_ERR
+		       "module %s: relocation overflow\n",
+		       me->name);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
+
+	return 0;
+}
+
+static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) |
+		    ((((long long) v + 0x8000LL) >> 16) & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_lo16_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) | (v & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_64_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*(Elf_Addr *)location = v;
+
+	return 0;
+}
+
+static int apply_r_mips_higher_rela(struct module *me, u32 *location,
+				    Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) |
+		    ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_highest_rela(struct module *me, u32 *location,
+				     Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) |
+		    ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
+
+	return 0;
+}
+
+static int (*reloc_handlers_rela[]) (struct module *me, u32 *location,
+				Elf_Addr v) = {
+	[R_MIPS_NONE]		= apply_r_mips_none,
+	[R_MIPS_32]		= apply_r_mips_32_rela,
+	[R_MIPS_26]		= apply_r_mips_26_rela,
+	[R_MIPS_HI16]		= apply_r_mips_hi16_rela,
+	[R_MIPS_LO16]		= apply_r_mips_lo16_rela,
+	[R_MIPS_64]		= apply_r_mips_64_rela,
+	[R_MIPS_HIGHER]		= apply_r_mips_higher_rela,
+	[R_MIPS_HIGHEST]	= apply_r_mips_highest_rela
+};
+
+int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
+		       unsigned int symindex, unsigned int relsec,
+		       struct module *me)
+{
+	Elf_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr;
+	Elf_Sym *sym;
+	u32 *location;
+	unsigned int i;
+	Elf_Addr v;
+	int res;
+
+	pr_debug("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to */
+		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+			+ ELF_MIPS_R_SYM(rel[i]);
+		if (IS_ERR_VALUE(sym->st_value)) {
+			/* Ignore unresolved weak symbol */
+			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+				continue;
+			printk(KERN_WARNING "%s: Unknown symbol %s\n",
+			       me->name, strtab + sym->st_name);
+			return -ENOENT;
+		}
+
+		v = sym->st_value + rel[i].r_addend;
+
+		res = reloc_handlers_rela[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
new file mode 100644
index 000000000..1833f5171
--- /dev/null
+++ b/arch/mips/kernel/module.c
@@ -0,0 +1,298 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *  Copyright (C) 2001 Rusty Russell.
+ *  Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
+ *  Copyright (C) 2005 Thiemo Seufer
+ */
+
+#undef DEBUG
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/mm.h>
+#include <linux/numa.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/jump_label.h>
+
+#include <asm/pgtable.h>	/* MODULE_START */
+
+struct mips_hi16 {
+	struct mips_hi16 *next;
+	Elf_Addr *addr;
+	Elf_Addr value;
+};
+
+static LIST_HEAD(dbe_list);
+static DEFINE_SPINLOCK(dbe_lock);
+
+#ifdef MODULE_START
+void *module_alloc(unsigned long size)
+{
+	return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
+				GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE,
+				__builtin_return_address(0));
+}
+#endif
+
+int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v)
+{
+	return 0;
+}
+
+static int apply_r_mips_32_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location += v;
+
+	return 0;
+}
+
+static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	if (v % 4) {
+		pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+		       me->name);
+		return -ENOEXEC;
+	}
+
+	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+		printk(KERN_ERR
+		       "module %s: relocation overflow\n",
+		       me->name);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & ~0x03ffffff) |
+		    ((*location + (v >> 2)) & 0x03ffffff);
+
+	return 0;
+}
+
+static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	struct mips_hi16 *n;
+
+	/*
+	 * We cannot relocate this one now because we don't know the value of
+	 * the carry we need to add.  Save the information, and let LO16 do the
+	 * actual relocation.
+	 */
+	n = kmalloc(sizeof *n, GFP_KERNEL);
+	if (!n)
+		return -ENOMEM;
+
+	n->addr = (Elf_Addr *)location;
+	n->value = v;
+	n->next = me->arch.r_mips_hi16_list;
+	me->arch.r_mips_hi16_list = n;
+
+	return 0;
+}
+
+static void free_relocation_chain(struct mips_hi16 *l)
+{
+	struct mips_hi16 *next;
+
+	while (l) {
+		next = l->next;
+		kfree(l);
+		l = next;
+	}
+}
+
+static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	unsigned long insnlo = *location;
+	struct mips_hi16 *l;
+	Elf_Addr val, vallo;
+
+	/* Sign extend the addend we extract from the lo insn.	*/
+	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
+
+	if (me->arch.r_mips_hi16_list != NULL) {
+		l = me->arch.r_mips_hi16_list;
+		while (l != NULL) {
+			struct mips_hi16 *next;
+			unsigned long insn;
+
+			/*
+			 * The value for the HI16 had best be the same.
+			 */
+			if (v != l->value)
+				goto out_danger;
+
+			/*
+			 * Do the HI16 relocation.  Note that we actually don't
+			 * need to know anything about the LO16 itself, except
+			 * where to find the low 16 bits of the addend needed
+			 * by the LO16.
+			 */
+			insn = *l->addr;
+			val = ((insn & 0xffff) << 16) + vallo;
+			val += v;
+
+			/*
+			 * Account for the sign extension that will happen in
+			 * the low bits.
+			 */
+			val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
+
+			insn = (insn & ~0xffff) | val;
+			*l->addr = insn;
+
+			next = l->next;
+			kfree(l);
+			l = next;
+		}
+
+		me->arch.r_mips_hi16_list = NULL;
+	}
+
+	/*
+	 * Ok, we're done with the HI16 relocs.	 Now deal with the LO16.
+	 */
+	val = v + vallo;
+	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
+	*location = insnlo;
+
+	return 0;
+
+out_danger:
+	free_relocation_chain(l);
+	me->arch.r_mips_hi16_list = NULL;
+
+	pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name);
+
+	return -ENOEXEC;
+}
+
+static int (*reloc_handlers_rel[]) (struct module *me, u32 *location,
+				Elf_Addr v) = {
+	[R_MIPS_NONE]		= apply_r_mips_none,
+	[R_MIPS_32]		= apply_r_mips_32_rel,
+	[R_MIPS_26]		= apply_r_mips_26_rel,
+	[R_MIPS_HI16]		= apply_r_mips_hi16_rel,
+	[R_MIPS_LO16]		= apply_r_mips_lo16_rel
+};
+
+int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
+		   unsigned int symindex, unsigned int relsec,
+		   struct module *me)
+{
+	Elf_Mips_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+	Elf_Sym *sym;
+	u32 *location;
+	unsigned int i;
+	Elf_Addr v;
+	int res;
+
+	pr_debug("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+
+	me->arch.r_mips_hi16_list = NULL;
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to */
+		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+			+ ELF_MIPS_R_SYM(rel[i]);
+		if (IS_ERR_VALUE(sym->st_value)) {
+			/* Ignore unresolved weak symbol */
+			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+				continue;
+			printk(KERN_WARNING "%s: Unknown symbol %s\n",
+			       me->name, strtab + sym->st_name);
+			return -ENOENT;
+		}
+
+		v = sym->st_value;
+
+		res = reloc_handlers_rel[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+		if (res)
+			return res;
+	}
+
+	/*
+	 * Normally the hi16 list should be deallocated at this point.	A
+	 * malformed binary however could contain a series of R_MIPS_HI16
+	 * relocations not followed by a R_MIPS_LO16 relocation.  In that
+	 * case, free up the list and return an error.
+	 */
+	if (me->arch.r_mips_hi16_list) {
+		free_relocation_chain(me->arch.r_mips_hi16_list);
+		me->arch.r_mips_hi16_list = NULL;
+
+		return -ENOEXEC;
+	}
+
+	return 0;
+}
+
+/* Given an address, look for it in the module exception tables. */
+const struct exception_table_entry *search_module_dbetables(unsigned long addr)
+{
+	unsigned long flags;
+	const struct exception_table_entry *e = NULL;
+	struct mod_arch_specific *dbe;
+
+	spin_lock_irqsave(&dbe_lock, flags);
+	list_for_each_entry(dbe, &dbe_list, dbe_list) {
+		e = search_extable(dbe->dbe_start, dbe->dbe_end - 1, addr);
+		if (e)
+			break;
+	}
+	spin_unlock_irqrestore(&dbe_lock, flags);
+
+	/* Now, if we found one, we are running inside it now, hence
+	   we cannot unload the module, hence no refcnt needed. */
+	return e;
+}
+
+/* Put in dbe list if necessary. */
+int module_finalize(const Elf_Ehdr *hdr,
+		    const Elf_Shdr *sechdrs,
+		    struct module *me)
+{
+	const Elf_Shdr *s;
+	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	/* Make jump label nops. */
+	jump_label_apply_nops(me);
+
+	INIT_LIST_HEAD(&me->arch.dbe_list);
+	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
+		if (strcmp("__dbe_table", secstrings + s->sh_name) != 0)
+			continue;
+		me->arch.dbe_start = (void *)s->sh_addr;
+		me->arch.dbe_end = (void *)s->sh_addr + s->sh_size;
+		spin_lock_irq(&dbe_lock);
+		list_add(&me->arch.dbe_list, &dbe_list);
+		spin_unlock_irq(&dbe_lock);
+	}
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+	spin_lock_irq(&dbe_lock);
+	list_del(&mod->arch.dbe_list);
+	spin_unlock_irq(&dbe_lock);
+}
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
new file mode 100644
index 000000000..423ae83af
--- /dev/null
+++ b/arch/mips/kernel/octeon_switch.S
@@ -0,0 +1,577 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1998, 1999, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1994, 1995, 1996, by Andreas Busse
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ *    written by Carsten Langgaard, carstenl@mips.com
+ */
+
+#define USE_ALTERNATE_RESUME_IMPL 1
+	.set push
+	.set arch=mips64r2
+#include "r4k_switch.S"
+	.set pop
+/*
+ * task_struct *resume(task_struct *prev, task_struct *next,
+ *		       struct thread_info *next_ti, int usedfpu)
+ */
+	.align	7
+	LEAF(resume)
+	.set arch=octeon
+	mfc0	t1, CP0_STATUS
+	LONG_S	t1, THREAD_STATUS(a0)
+	cpu_save_nonscratch a0
+	LONG_S	ra, THREAD_REG31(a0)
+
+	/*
+	 * check if we need to save FPU registers
+	 */
+	.set push
+	.set noreorder
+	beqz	a3, 1f
+	 PTR_L	t3, TASK_THREAD_INFO(a0)
+	.set pop
+
+	/*
+	 * clear saved user stack CU1 bit
+	 */
+	LONG_L	t0, ST_OFF(t3)
+	li	t1, ~ST0_CU1
+	and	t0, t0, t1
+	LONG_S	t0, ST_OFF(t3)
+
+	.set push
+	.set arch=mips64r2
+	fpu_save_double a0 t0 t1		# c0_status passed in t0
+						# clobbers t1
+	.set pop
+1:
+
+#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
+	/* Check if we need to store CVMSEG state */
+	dmfc0	t0, $11,7	/* CvmMemCtl */
+	bbit0	t0, 6, 3f	/* Is user access enabled? */
+
+	/* Store the CVMSEG state */
+	/* Extract the size of CVMSEG */
+	andi	t0, 0x3f
+	/* Multiply * (cache line size/sizeof(long)/2) */
+	sll	t0, 7-LONGLOG-1
+	li	t1, -32768	/* Base address of CVMSEG */
+	LONG_ADDI t2, a0, THREAD_CVMSEG /* Where to store CVMSEG to */
+	synciobdma
+2:
+	.set noreorder
+	LONG_L	t8, 0(t1)	/* Load from CVMSEG */
+	subu	t0, 1		/* Decrement loop var */
+	LONG_L	t9, LONGSIZE(t1)/* Load from CVMSEG */
+	LONG_ADDU t1, LONGSIZE*2 /* Increment loc in CVMSEG */
+	LONG_S	t8, 0(t2)	/* Store CVMSEG to thread storage */
+	LONG_ADDU t2, LONGSIZE*2 /* Increment loc in thread storage */
+	bnez	t0, 2b		/* Loop until we've copied it all */
+	 LONG_S t9, -LONGSIZE(t2)/* Store CVMSEG to thread storage */
+	.set reorder
+
+	/* Disable access to CVMSEG */
+	dmfc0	t0, $11,7	/* CvmMemCtl */
+	xori	t0, t0, 0x40	/* Bit 6 is CVMSEG user enable */
+	dmtc0	t0, $11,7	/* CvmMemCtl */
+#endif
+3:
+
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	PTR_LA	t8, __stack_chk_guard
+	LONG_L	t9, TASK_STACK_CANARY(a1)
+	LONG_S	t9, 0(t8)
+#endif
+
+	/*
+	 * The order of restoring the registers takes care of the race
+	 * updating $28, $29 and kernelsp without disabling ints.
+	 */
+	move	$28, a2
+	cpu_restore_nonscratch a1
+
+	PTR_ADDU	t0, $28, _THREAD_SIZE - 32
+	set_saved_sp	t0, t1, t2
+
+	mfc0	t1, CP0_STATUS		/* Do we really need this? */
+	li	a3, 0xff01
+	and	t1, a3
+	LONG_L	a2, THREAD_STATUS(a1)
+	nor	a3, $0, a3
+	and	a2, a3
+	or	a2, t1
+	mtc0	a2, CP0_STATUS
+	move	v0, a0
+	jr	ra
+	END(resume)
+
+/*
+ * void octeon_cop2_save(struct octeon_cop2_state *a0)
+ */
+	.align	7
+	.set push
+	.set noreorder
+	LEAF(octeon_cop2_save)
+
+	dmfc0	t9, $9,7	/* CvmCtl register. */
+
+	/* Save the COP2 CRC state */
+	dmfc2	t0, 0x0201
+	dmfc2	t1, 0x0202
+	dmfc2	t2, 0x0200
+	sd	t0, OCTEON_CP2_CRC_IV(a0)
+	sd	t1, OCTEON_CP2_CRC_LENGTH(a0)
+	/* Skip next instructions if CvmCtl[NODFA_CP2] set */
+	bbit1	t9, 28, 1f
+	 sd	t2, OCTEON_CP2_CRC_POLY(a0)
+
+	/* Save the LLM state */
+	dmfc2	t0, 0x0402
+	dmfc2	t1, 0x040A
+	sd	t0, OCTEON_CP2_LLM_DAT(a0)
+
+1:	bbit1	t9, 26, 3f	/* done if CvmCtl[NOCRYPTO] set */
+	 sd	t1, OCTEON_CP2_LLM_DAT+8(a0)
+
+	/* Save the COP2 crypto state */
+	/* this part is mostly common to both pass 1 and later revisions */
+	dmfc2	t0, 0x0084
+	dmfc2	t1, 0x0080
+	dmfc2	t2, 0x0081
+	dmfc2	t3, 0x0082
+	sd	t0, OCTEON_CP2_3DES_IV(a0)
+	dmfc2	t0, 0x0088
+	sd	t1, OCTEON_CP2_3DES_KEY(a0)
+	dmfc2	t1, 0x0111			/* only necessary for pass 1 */
+	sd	t2, OCTEON_CP2_3DES_KEY+8(a0)
+	dmfc2	t2, 0x0102
+	sd	t3, OCTEON_CP2_3DES_KEY+16(a0)
+	dmfc2	t3, 0x0103
+	sd	t0, OCTEON_CP2_3DES_RESULT(a0)
+	dmfc2	t0, 0x0104
+	sd	t1, OCTEON_CP2_AES_INP0(a0)	/* only necessary for pass 1 */
+	dmfc2	t1, 0x0105
+	sd	t2, OCTEON_CP2_AES_IV(a0)
+	dmfc2	t2, 0x0106
+	sd	t3, OCTEON_CP2_AES_IV+8(a0)
+	dmfc2	t3, 0x0107
+	sd	t0, OCTEON_CP2_AES_KEY(a0)
+	dmfc2	t0, 0x0110
+	sd	t1, OCTEON_CP2_AES_KEY+8(a0)
+	dmfc2	t1, 0x0100
+	sd	t2, OCTEON_CP2_AES_KEY+16(a0)
+	dmfc2	t2, 0x0101
+	sd	t3, OCTEON_CP2_AES_KEY+24(a0)
+	mfc0	v0, $15,0	/* Get the processor ID register */
+	sd	t0, OCTEON_CP2_AES_KEYLEN(a0)
+	li	v1, 0x000d0000	/* This is the processor ID of Octeon Pass1 */
+	sd	t1, OCTEON_CP2_AES_RESULT(a0)
+	/* Skip to the Pass1 version of the remainder of the COP2 state */
+	beq	v0, v1, 2f
+	 sd	t2, OCTEON_CP2_AES_RESULT+8(a0)
+
+	/* the non-pass1 state when !CvmCtl[NOCRYPTO] */
+	dmfc2	t1, 0x0240
+	dmfc2	t2, 0x0241
+	ori	v1, v1, 0x9500 /* lowest OCTEON III PrId*/
+	dmfc2	t3, 0x0242
+	subu	v1, v0, v1 /* prid - lowest OCTEON III PrId */
+	dmfc2	t0, 0x0243
+	sd	t1, OCTEON_CP2_HSH_DATW(a0)
+	dmfc2	t1, 0x0244
+	sd	t2, OCTEON_CP2_HSH_DATW+8(a0)
+	dmfc2	t2, 0x0245
+	sd	t3, OCTEON_CP2_HSH_DATW+16(a0)
+	dmfc2	t3, 0x0246
+	sd	t0, OCTEON_CP2_HSH_DATW+24(a0)
+	dmfc2	t0, 0x0247
+	sd	t1, OCTEON_CP2_HSH_DATW+32(a0)
+	dmfc2	t1, 0x0248
+	sd	t2, OCTEON_CP2_HSH_DATW+40(a0)
+	dmfc2	t2, 0x0249
+	sd	t3, OCTEON_CP2_HSH_DATW+48(a0)
+	dmfc2	t3, 0x024A
+	sd	t0, OCTEON_CP2_HSH_DATW+56(a0)
+	dmfc2	t0, 0x024B
+	sd	t1, OCTEON_CP2_HSH_DATW+64(a0)
+	dmfc2	t1, 0x024C
+	sd	t2, OCTEON_CP2_HSH_DATW+72(a0)
+	dmfc2	t2, 0x024D
+	sd	t3, OCTEON_CP2_HSH_DATW+80(a0)
+	dmfc2	t3, 0x024E
+	sd	t0, OCTEON_CP2_HSH_DATW+88(a0)
+	dmfc2	t0, 0x0250
+	sd	t1, OCTEON_CP2_HSH_DATW+96(a0)
+	dmfc2	t1, 0x0251
+	sd	t2, OCTEON_CP2_HSH_DATW+104(a0)
+	dmfc2	t2, 0x0252
+	sd	t3, OCTEON_CP2_HSH_DATW+112(a0)
+	dmfc2	t3, 0x0253
+	sd	t0, OCTEON_CP2_HSH_IVW(a0)
+	dmfc2	t0, 0x0254
+	sd	t1, OCTEON_CP2_HSH_IVW+8(a0)
+	dmfc2	t1, 0x0255
+	sd	t2, OCTEON_CP2_HSH_IVW+16(a0)
+	dmfc2	t2, 0x0256
+	sd	t3, OCTEON_CP2_HSH_IVW+24(a0)
+	dmfc2	t3, 0x0257
+	sd	t0, OCTEON_CP2_HSH_IVW+32(a0)
+	dmfc2	t0, 0x0258
+	sd	t1, OCTEON_CP2_HSH_IVW+40(a0)
+	dmfc2	t1, 0x0259
+	sd	t2, OCTEON_CP2_HSH_IVW+48(a0)
+	dmfc2	t2, 0x025E
+	sd	t3, OCTEON_CP2_HSH_IVW+56(a0)
+	dmfc2	t3, 0x025A
+	sd	t0, OCTEON_CP2_GFM_MULT(a0)
+	dmfc2	t0, 0x025B
+	sd	t1, OCTEON_CP2_GFM_MULT+8(a0)
+	sd	t2, OCTEON_CP2_GFM_POLY(a0)
+	sd	t3, OCTEON_CP2_GFM_RESULT(a0)
+	bltz	v1, 4f
+	 sd	t0, OCTEON_CP2_GFM_RESULT+8(a0)
+	/* OCTEON III things*/
+	dmfc2	t0, 0x024F
+	dmfc2	t1, 0x0050
+	sd	t0, OCTEON_CP2_SHA3(a0)
+	sd	t1, OCTEON_CP2_SHA3+8(a0)
+4:
+	jr	ra
+	 nop
+
+2:	/* pass 1 special stuff when !CvmCtl[NOCRYPTO] */
+	dmfc2	t3, 0x0040
+	dmfc2	t0, 0x0041
+	dmfc2	t1, 0x0042
+	dmfc2	t2, 0x0043
+	sd	t3, OCTEON_CP2_HSH_DATW(a0)
+	dmfc2	t3, 0x0044
+	sd	t0, OCTEON_CP2_HSH_DATW+8(a0)
+	dmfc2	t0, 0x0045
+	sd	t1, OCTEON_CP2_HSH_DATW+16(a0)
+	dmfc2	t1, 0x0046
+	sd	t2, OCTEON_CP2_HSH_DATW+24(a0)
+	dmfc2	t2, 0x0048
+	sd	t3, OCTEON_CP2_HSH_DATW+32(a0)
+	dmfc2	t3, 0x0049
+	sd	t0, OCTEON_CP2_HSH_DATW+40(a0)
+	dmfc2	t0, 0x004A
+	sd	t1, OCTEON_CP2_HSH_DATW+48(a0)
+	sd	t2, OCTEON_CP2_HSH_IVW(a0)
+	sd	t3, OCTEON_CP2_HSH_IVW+8(a0)
+	sd	t0, OCTEON_CP2_HSH_IVW+16(a0)
+
+3:	/* pass 1 or CvmCtl[NOCRYPTO] set */
+	jr	ra
+	 nop
+	END(octeon_cop2_save)
+	.set pop
+
+/*
+ * void octeon_cop2_restore(struct octeon_cop2_state *a0)
+ */
+	.align	7
+	.set push
+	.set noreorder
+	LEAF(octeon_cop2_restore)
+	/* First cache line was prefetched before the call */
+	pref	4,  128(a0)
+	dmfc0	t9, $9,7	/* CvmCtl register. */
+
+	pref	4,  256(a0)
+	ld	t0, OCTEON_CP2_CRC_IV(a0)
+	pref	4,  384(a0)
+	ld	t1, OCTEON_CP2_CRC_LENGTH(a0)
+	ld	t2, OCTEON_CP2_CRC_POLY(a0)
+
+	/* Restore the COP2 CRC state */
+	dmtc2	t0, 0x0201
+	dmtc2	t1, 0x1202
+	bbit1	t9, 28, 2f	/* Skip LLM if CvmCtl[NODFA_CP2] is set */
+	 dmtc2	t2, 0x4200
+
+	/* Restore the LLM state */
+	ld	t0, OCTEON_CP2_LLM_DAT(a0)
+	ld	t1, OCTEON_CP2_LLM_DAT+8(a0)
+	dmtc2	t0, 0x0402
+	dmtc2	t1, 0x040A
+
+2:
+	bbit1	t9, 26, done_restore	/* done if CvmCtl[NOCRYPTO] set */
+	 nop
+
+	/* Restore the COP2 crypto state common to pass 1 and pass 2 */
+	ld	t0, OCTEON_CP2_3DES_IV(a0)
+	ld	t1, OCTEON_CP2_3DES_KEY(a0)
+	ld	t2, OCTEON_CP2_3DES_KEY+8(a0)
+	dmtc2	t0, 0x0084
+	ld	t0, OCTEON_CP2_3DES_KEY+16(a0)
+	dmtc2	t1, 0x0080
+	ld	t1, OCTEON_CP2_3DES_RESULT(a0)
+	dmtc2	t2, 0x0081
+	ld	t2, OCTEON_CP2_AES_INP0(a0) /* only really needed for pass 1 */
+	dmtc2	t0, 0x0082
+	ld	t0, OCTEON_CP2_AES_IV(a0)
+	dmtc2	t1, 0x0098
+	ld	t1, OCTEON_CP2_AES_IV+8(a0)
+	dmtc2	t2, 0x010A		    /* only really needed for pass 1 */
+	ld	t2, OCTEON_CP2_AES_KEY(a0)
+	dmtc2	t0, 0x0102
+	ld	t0, OCTEON_CP2_AES_KEY+8(a0)
+	dmtc2	t1, 0x0103
+	ld	t1, OCTEON_CP2_AES_KEY+16(a0)
+	dmtc2	t2, 0x0104
+	ld	t2, OCTEON_CP2_AES_KEY+24(a0)
+	dmtc2	t0, 0x0105
+	ld	t0, OCTEON_CP2_AES_KEYLEN(a0)
+	dmtc2	t1, 0x0106
+	ld	t1, OCTEON_CP2_AES_RESULT(a0)
+	dmtc2	t2, 0x0107
+	ld	t2, OCTEON_CP2_AES_RESULT+8(a0)
+	mfc0	t3, $15,0	/* Get the processor ID register */
+	dmtc2	t0, 0x0110
+	li	v0, 0x000d0000	/* This is the processor ID of Octeon Pass1 */
+	dmtc2	t1, 0x0100
+	bne	v0, t3, 3f	/* Skip the next stuff for non-pass1 */
+	 dmtc2	t2, 0x0101
+
+	/* this code is specific for pass 1 */
+	ld	t0, OCTEON_CP2_HSH_DATW(a0)
+	ld	t1, OCTEON_CP2_HSH_DATW+8(a0)
+	ld	t2, OCTEON_CP2_HSH_DATW+16(a0)
+	dmtc2	t0, 0x0040
+	ld	t0, OCTEON_CP2_HSH_DATW+24(a0)
+	dmtc2	t1, 0x0041
+	ld	t1, OCTEON_CP2_HSH_DATW+32(a0)
+	dmtc2	t2, 0x0042
+	ld	t2, OCTEON_CP2_HSH_DATW+40(a0)
+	dmtc2	t0, 0x0043
+	ld	t0, OCTEON_CP2_HSH_DATW+48(a0)
+	dmtc2	t1, 0x0044
+	ld	t1, OCTEON_CP2_HSH_IVW(a0)
+	dmtc2	t2, 0x0045
+	ld	t2, OCTEON_CP2_HSH_IVW+8(a0)
+	dmtc2	t0, 0x0046
+	ld	t0, OCTEON_CP2_HSH_IVW+16(a0)
+	dmtc2	t1, 0x0048
+	dmtc2	t2, 0x0049
+	b done_restore	 /* unconditional branch */
+	 dmtc2	t0, 0x004A
+
+3:	/* this is post-pass1 code */
+	ld	t2, OCTEON_CP2_HSH_DATW(a0)
+	ori	v0, v0, 0x9500 /* lowest OCTEON III PrId*/
+	ld	t0, OCTEON_CP2_HSH_DATW+8(a0)
+	ld	t1, OCTEON_CP2_HSH_DATW+16(a0)
+	dmtc2	t2, 0x0240
+	ld	t2, OCTEON_CP2_HSH_DATW+24(a0)
+	dmtc2	t0, 0x0241
+	ld	t0, OCTEON_CP2_HSH_DATW+32(a0)
+	dmtc2	t1, 0x0242
+	ld	t1, OCTEON_CP2_HSH_DATW+40(a0)
+	dmtc2	t2, 0x0243
+	ld	t2, OCTEON_CP2_HSH_DATW+48(a0)
+	dmtc2	t0, 0x0244
+	ld	t0, OCTEON_CP2_HSH_DATW+56(a0)
+	dmtc2	t1, 0x0245
+	ld	t1, OCTEON_CP2_HSH_DATW+64(a0)
+	dmtc2	t2, 0x0246
+	ld	t2, OCTEON_CP2_HSH_DATW+72(a0)
+	dmtc2	t0, 0x0247
+	ld	t0, OCTEON_CP2_HSH_DATW+80(a0)
+	dmtc2	t1, 0x0248
+	ld	t1, OCTEON_CP2_HSH_DATW+88(a0)
+	dmtc2	t2, 0x0249
+	ld	t2, OCTEON_CP2_HSH_DATW+96(a0)
+	dmtc2	t0, 0x024A
+	ld	t0, OCTEON_CP2_HSH_DATW+104(a0)
+	dmtc2	t1, 0x024B
+	ld	t1, OCTEON_CP2_HSH_DATW+112(a0)
+	dmtc2	t2, 0x024C
+	ld	t2, OCTEON_CP2_HSH_IVW(a0)
+	dmtc2	t0, 0x024D
+	ld	t0, OCTEON_CP2_HSH_IVW+8(a0)
+	dmtc2	t1, 0x024E
+	ld	t1, OCTEON_CP2_HSH_IVW+16(a0)
+	dmtc2	t2, 0x0250
+	ld	t2, OCTEON_CP2_HSH_IVW+24(a0)
+	dmtc2	t0, 0x0251
+	ld	t0, OCTEON_CP2_HSH_IVW+32(a0)
+	dmtc2	t1, 0x0252
+	ld	t1, OCTEON_CP2_HSH_IVW+40(a0)
+	dmtc2	t2, 0x0253
+	ld	t2, OCTEON_CP2_HSH_IVW+48(a0)
+	dmtc2	t0, 0x0254
+	ld	t0, OCTEON_CP2_HSH_IVW+56(a0)
+	dmtc2	t1, 0x0255
+	ld	t1, OCTEON_CP2_GFM_MULT(a0)
+	dmtc2	t2, 0x0256
+	ld	t2, OCTEON_CP2_GFM_MULT+8(a0)
+	dmtc2	t0, 0x0257
+	ld	t0, OCTEON_CP2_GFM_POLY(a0)
+	dmtc2	t1, 0x0258
+	ld	t1, OCTEON_CP2_GFM_RESULT(a0)
+	dmtc2	t2, 0x0259
+	ld	t2, OCTEON_CP2_GFM_RESULT+8(a0)
+	dmtc2	t0, 0x025E
+	subu	v0, t3, v0 /* prid - lowest OCTEON III PrId */
+	dmtc2	t1, 0x025A
+	bltz	v0, done_restore
+	 dmtc2	t2, 0x025B
+	/* OCTEON III things*/
+	ld	t0, OCTEON_CP2_SHA3(a0)
+	ld	t1, OCTEON_CP2_SHA3+8(a0)
+	dmtc2	t0, 0x0051
+	dmtc2	t1, 0x0050
+done_restore:
+	jr	ra
+	 nop
+	END(octeon_cop2_restore)
+	.set pop
+
+/*
+ * void octeon_mult_save()
+ * sp is assumed to point to a struct pt_regs
+ *
+ * NOTE: This is called in SAVE_TEMP in stackframe.h. It can
+ *       safely modify v1,k0, k1,$10-$15, and $24.  It will
+ *	 be overwritten with a processor specific version of the code.
+ */
+	.p2align 7
+	.set push
+	.set noreorder
+	LEAF(octeon_mult_save)
+	jr	ra
+	 nop
+	.space 30 * 4, 0
+octeon_mult_save_end:
+	EXPORT(octeon_mult_save_end)
+	END(octeon_mult_save)
+
+	LEAF(octeon_mult_save2)
+	/* Save the multiplier state OCTEON II and earlier*/
+	v3mulu	k0, $0, $0
+	v3mulu	k1, $0, $0
+	sd	k0, PT_MTP(sp)	      /* PT_MTP	   has P0 */
+	v3mulu	k0, $0, $0
+	sd	k1, PT_MTP+8(sp)      /* PT_MTP+8  has P1 */
+	ori	k1, $0, 1
+	v3mulu	k1, k1, $0
+	sd	k0, PT_MTP+16(sp)     /* PT_MTP+16 has P2 */
+	v3mulu	k0, $0, $0
+	sd	k1, PT_MPL(sp)	      /* PT_MPL	   has MPL0 */
+	v3mulu	k1, $0, $0
+	sd	k0, PT_MPL+8(sp)      /* PT_MPL+8  has MPL1 */
+	jr	ra
+	 sd	k1, PT_MPL+16(sp)     /* PT_MPL+16 has MPL2 */
+octeon_mult_save2_end:
+	EXPORT(octeon_mult_save2_end)
+	END(octeon_mult_save2)
+
+	LEAF(octeon_mult_save3)
+	/* Save the multiplier state OCTEON III */
+	v3mulu	$10, $0, $0		/* read P0 */
+	v3mulu	$11, $0, $0		/* read P1 */
+	v3mulu	$12, $0, $0		/* read P2 */
+	sd	$10, PT_MTP+(0*8)(sp)	/* store P0 */
+	v3mulu	$10, $0, $0		/* read P3 */
+	sd	$11, PT_MTP+(1*8)(sp)	/*  store P1 */
+	v3mulu	$11, $0, $0		/* read P4 */
+	sd	$12, PT_MTP+(2*8)(sp)	/* store P2 */
+	ori	$13, $0, 1
+	v3mulu	$12, $0, $0		/* read P5 */
+	sd	$10, PT_MTP+(3*8)(sp)	/* store P3 */
+	v3mulu	$13, $13, $0		/* P4-P0 = MPL5-MPL1, $13 = MPL0 */
+	sd	$11, PT_MTP+(4*8)(sp)	/* store P4 */
+	v3mulu	$10, $0, $0		/* read MPL1 */
+	sd	$12, PT_MTP+(5*8)(sp)	/* store P5 */
+	v3mulu	$11, $0, $0		/* read MPL2 */
+	sd	$13, PT_MPL+(0*8)(sp)	/* store MPL0 */
+	v3mulu	$12, $0, $0		/* read MPL3 */
+	sd	$10, PT_MPL+(1*8)(sp)	/* store MPL1 */
+	v3mulu	$10, $0, $0		/* read MPL4 */
+	sd	$11, PT_MPL+(2*8)(sp)	/* store MPL2 */
+	v3mulu	$11, $0, $0		/* read MPL5 */
+	sd	$12, PT_MPL+(3*8)(sp)	/* store MPL3 */
+	sd	$10, PT_MPL+(4*8)(sp)	/* store MPL4 */
+	jr	ra
+	 sd	$11, PT_MPL+(5*8)(sp)	/* store MPL5 */
+octeon_mult_save3_end:
+	EXPORT(octeon_mult_save3_end)
+	END(octeon_mult_save3)
+	.set pop
+
+/*
+ * void octeon_mult_restore()
+ * sp is assumed to point to a struct pt_regs
+ *
+ * NOTE: This is called in RESTORE_TEMP in stackframe.h.
+ */
+	.p2align 7
+	.set push
+	.set noreorder
+	LEAF(octeon_mult_restore)
+	jr	ra
+	 nop
+	.space 30 * 4, 0
+octeon_mult_restore_end:
+	EXPORT(octeon_mult_restore_end)
+	END(octeon_mult_restore)
+
+	LEAF(octeon_mult_restore2)
+	ld	v0, PT_MPL(sp)        	/* MPL0 */
+	ld	v1, PT_MPL+8(sp)      	/* MPL1 */
+	ld	k0, PT_MPL+16(sp)     	/* MPL2 */
+	/* Restore the multiplier state */
+	ld	k1, PT_MTP+16(sp)     	/* P2 */
+	mtm0	v0			/* MPL0 */
+	ld	v0, PT_MTP+8(sp)	/* P1 */
+	mtm1	v1			/* MPL1 */
+	ld	v1, PT_MTP(sp)   	/* P0 */
+	mtm2	k0			/* MPL2 */
+	mtp2	k1			/* P2 */
+	mtp1	v0			/* P1 */
+	jr	ra
+	 mtp0	v1			/* P0 */
+octeon_mult_restore2_end:
+	EXPORT(octeon_mult_restore2_end)
+	END(octeon_mult_restore2)
+
+	LEAF(octeon_mult_restore3)
+	ld	$12, PT_MPL+(0*8)(sp)	/* read MPL0 */
+	ld	$13, PT_MPL+(3*8)(sp)	/* read MPL3 */
+	ld	$10, PT_MPL+(1*8)(sp)	/* read MPL1 */
+	ld	$11, PT_MPL+(4*8)(sp)	/* read MPL4 */
+	.word	0x718d0008
+	/* mtm0	$12, $13		   restore MPL0 and MPL3 */
+	ld	$12, PT_MPL+(2*8)(sp)	/* read MPL2 */
+	.word	0x714b000c
+	/* mtm1	$10, $11		   restore MPL1 and MPL4 */
+	ld	$13, PT_MPL+(5*8)(sp)	/* read MPL5 */
+	ld	$10, PT_MTP+(0*8)(sp)	/* read P0 */
+	ld	$11, PT_MTP+(3*8)(sp)	/* read P3 */
+	.word	0x718d000d
+	/* mtm2	$12, $13		   restore MPL2 and MPL5 */
+	ld	$12, PT_MTP+(1*8)(sp)	/* read P1 */
+	.word	0x714b0009
+	/* mtp0	$10, $11		   restore P0 and P3 */
+	ld	$13, PT_MTP+(4*8)(sp)	/* read P4 */
+	ld	$10, PT_MTP+(2*8)(sp)	/* read P2 */
+	ld	$11, PT_MTP+(5*8)(sp)	/* read P5 */
+	.word	0x718d000a
+	/* mtp1	$12, $13		   restore P1 and P4 */
+	jr	ra
+	.word	0x714b000b
+	/* mtp2	$10, $11		   restore P2 and P5 */
+
+octeon_mult_restore3_end:
+	EXPORT(octeon_mult_restore3_end)
+	END(octeon_mult_restore3)
+	.set pop
diff --git a/arch/mips/kernel/perf_event.c b/arch/mips/kernel/perf_event.c
new file mode 100644
index 000000000..c1cf9c6c3
--- /dev/null
+++ b/arch/mips/kernel/perf_event.c
@@ -0,0 +1,69 @@
+/*
+ * Linux performance counter support for MIPS.
+ *
+ * Copyright (C) 2010 MIPS Technologies, Inc.
+ * Author: Deng-Cheng Zhu
+ *
+ * This code is based on the implementation for ARM, which is in turn
+ * based on the sparc64 perf event code and the x86 code. Performance
+ * counter access is based on the MIPS Oprofile code. And the callchain
+ * support references the code of MIPS stacktrace.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/perf_event.h>
+
+#include <asm/stacktrace.h>
+
+/* Callchain handling code. */
+
+/*
+ * Leave userspace callchain empty for now. When we find a way to trace
+ * the user stack callchains, we will add it here.
+ */
+
+static void save_raw_perf_callchain(struct perf_callchain_entry *entry,
+	unsigned long reg29)
+{
+	unsigned long *sp = (unsigned long *)reg29;
+	unsigned long addr;
+
+	while (!kstack_end(sp)) {
+		addr = *sp++;
+		if (__kernel_text_address(addr)) {
+			perf_callchain_store(entry, addr);
+			if (entry->nr >= PERF_MAX_STACK_DEPTH)
+				break;
+		}
+	}
+}
+
+void perf_callchain_kernel(struct perf_callchain_entry *entry,
+		      struct pt_regs *regs)
+{
+	unsigned long sp = regs->regs[29];
+#ifdef CONFIG_KALLSYMS
+	unsigned long ra = regs->regs[31];
+	unsigned long pc = regs->cp0_epc;
+
+	if (raw_show_trace || !__kernel_text_address(pc)) {
+		unsigned long stack_page =
+			(unsigned long)task_stack_page(current);
+		if (stack_page && sp >= stack_page &&
+		    sp <= stack_page + THREAD_SIZE - 32)
+			save_raw_perf_callchain(entry, sp);
+		return;
+	}
+	do {
+		perf_callchain_store(entry, pc);
+		if (entry->nr >= PERF_MAX_STACK_DEPTH)
+			break;
+		pc = unwind_stack(current, &sp, pc, &ra);
+	} while (pc);
+#else
+	save_raw_perf_callchain(entry, sp);
+#endif
+}
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
new file mode 100644
index 000000000..cc1b6fadf
--- /dev/null
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -0,0 +1,1799 @@
+/*
+ * Linux performance counter support for MIPS.
+ *
+ * Copyright (C) 2010 MIPS Technologies, Inc.
+ * Copyright (C) 2011 Cavium Networks, Inc.
+ * Author: Deng-Cheng Zhu
+ *
+ * This code is based on the implementation for ARM, which is in turn
+ * based on the sparc64 perf event code and the x86 code. Performance
+ * counter access is based on the MIPS Oprofile code. And the callchain
+ * support references the code of MIPS stacktrace.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/perf_event.h>
+#include <linux/uaccess.h>
+
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/stacktrace.h>
+#include <asm/time.h> /* For perf_irq */
+
+#define MIPS_MAX_HWEVENTS 4
+#define MIPS_TCS_PER_COUNTER 2
+#define MIPS_CPUID_TO_COUNTER_MASK (MIPS_TCS_PER_COUNTER - 1)
+
+struct cpu_hw_events {
+	/* Array of events on this cpu. */
+	struct perf_event	*events[MIPS_MAX_HWEVENTS];
+
+	/*
+	 * Set the bit (indexed by the counter number) when the counter
+	 * is used for an event.
+	 */
+	unsigned long		used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
+
+	/*
+	 * Software copy of the control register for each performance counter.
+	 * MIPS CPUs vary in performance counters. They use this differently,
+	 * and even may not use it.
+	 */
+	unsigned int		saved_ctrl[MIPS_MAX_HWEVENTS];
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
+	.saved_ctrl = {0},
+};
+
+/* The description of MIPS performance events. */
+struct mips_perf_event {
+	unsigned int event_id;
+	/*
+	 * MIPS performance counters are indexed starting from 0.
+	 * CNTR_EVEN indicates the indexes of the counters to be used are
+	 * even numbers.
+	 */
+	unsigned int cntr_mask;
+	#define CNTR_EVEN	0x55555555
+	#define CNTR_ODD	0xaaaaaaaa
+	#define CNTR_ALL	0xffffffff
+#ifdef CONFIG_MIPS_MT_SMP
+	enum {
+		T  = 0,
+		V  = 1,
+		P  = 2,
+	} range;
+#else
+	#define T
+	#define V
+	#define P
+#endif
+};
+
+static struct mips_perf_event raw_event;
+static DEFINE_MUTEX(raw_event_mutex);
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+struct mips_pmu {
+	u64		max_period;
+	u64		valid_count;
+	u64		overflow;
+	const char	*name;
+	int		irq;
+	u64		(*read_counter)(unsigned int idx);
+	void		(*write_counter)(unsigned int idx, u64 val);
+	const struct mips_perf_event *(*map_raw_event)(u64 config);
+	const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX];
+	const struct mips_perf_event (*cache_event_map)
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX];
+	unsigned int	num_counters;
+};
+
+static struct mips_pmu mipspmu;
+
+#define M_CONFIG1_PC	(1 << 4)
+
+#define M_PERFCTL_EXL			(1	<<  0)
+#define M_PERFCTL_KERNEL		(1	<<  1)
+#define M_PERFCTL_SUPERVISOR		(1	<<  2)
+#define M_PERFCTL_USER			(1	<<  3)
+#define M_PERFCTL_INTERRUPT_ENABLE	(1	<<  4)
+#define M_PERFCTL_EVENT(event)		(((event) & 0x3ff)  << 5)
+#define M_PERFCTL_VPEID(vpe)		((vpe)	  << 16)
+
+#ifdef CONFIG_CPU_BMIPS5000
+#define M_PERFCTL_MT_EN(filter)		0
+#else /* !CONFIG_CPU_BMIPS5000 */
+#define M_PERFCTL_MT_EN(filter)		((filter) << 20)
+#endif /* CONFIG_CPU_BMIPS5000 */
+
+#define	   M_TC_EN_ALL			M_PERFCTL_MT_EN(0)
+#define	   M_TC_EN_VPE			M_PERFCTL_MT_EN(1)
+#define	   M_TC_EN_TC			M_PERFCTL_MT_EN(2)
+#define M_PERFCTL_TCID(tcid)		((tcid)	  << 22)
+#define M_PERFCTL_WIDE			(1	<< 30)
+#define M_PERFCTL_MORE			(1	<< 31)
+#define M_PERFCTL_TC			(1	<< 30)
+
+#define M_PERFCTL_COUNT_EVENT_WHENEVER	(M_PERFCTL_EXL |		\
+					M_PERFCTL_KERNEL |		\
+					M_PERFCTL_USER |		\
+					M_PERFCTL_SUPERVISOR |		\
+					M_PERFCTL_INTERRUPT_ENABLE)
+
+#ifdef CONFIG_MIPS_MT_SMP
+#define M_PERFCTL_CONFIG_MASK		0x3fff801f
+#else
+#define M_PERFCTL_CONFIG_MASK		0x1f
+#endif
+#define M_PERFCTL_EVENT_MASK		0xfe0
+
+
+#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
+static int cpu_has_mipsmt_pertccounters;
+
+static DEFINE_RWLOCK(pmuint_rwlock);
+
+#if defined(CONFIG_CPU_BMIPS5000)
+#define vpe_id()	(cpu_has_mipsmt_pertccounters ? \
+			 0 : (smp_processor_id() & MIPS_CPUID_TO_COUNTER_MASK))
+#else
+/*
+ * FIXME: For VSMP, vpe_id() is redefined for Perf-events, because
+ * cpu_data[cpuid].vpe_id reports 0 for _both_ CPUs.
+ */
+#define vpe_id()	(cpu_has_mipsmt_pertccounters ? \
+			 0 : smp_processor_id())
+#endif
+
+/* Copied from op_model_mipsxx.c */
+static unsigned int vpe_shift(void)
+{
+	if (num_possible_cpus() > 1)
+		return 1;
+
+	return 0;
+}
+
+static unsigned int counters_total_to_per_cpu(unsigned int counters)
+{
+	return counters >> vpe_shift();
+}
+
+#else /* !CONFIG_MIPS_PERF_SHARED_TC_COUNTERS */
+#define vpe_id()	0
+
+#endif /* CONFIG_MIPS_PERF_SHARED_TC_COUNTERS */
+
+static void resume_local_counters(void);
+static void pause_local_counters(void);
+static irqreturn_t mipsxx_pmu_handle_irq(int, void *);
+static int mipsxx_pmu_handle_shared_irq(void);
+
+static unsigned int mipsxx_pmu_swizzle_perf_idx(unsigned int idx)
+{
+	if (vpe_id() == 1)
+		idx = (idx + 2) & 3;
+	return idx;
+}
+
+static u64 mipsxx_pmu_read_counter(unsigned int idx)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		/*
+		 * The counters are unsigned, we must cast to truncate
+		 * off the high bits.
+		 */
+		return (u32)read_c0_perfcntr0();
+	case 1:
+		return (u32)read_c0_perfcntr1();
+	case 2:
+		return (u32)read_c0_perfcntr2();
+	case 3:
+		return (u32)read_c0_perfcntr3();
+	default:
+		WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
+		return 0;
+	}
+}
+
+static u64 mipsxx_pmu_read_counter_64(unsigned int idx)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		return read_c0_perfcntr0_64();
+	case 1:
+		return read_c0_perfcntr1_64();
+	case 2:
+		return read_c0_perfcntr2_64();
+	case 3:
+		return read_c0_perfcntr3_64();
+	default:
+		WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
+		return 0;
+	}
+}
+
+static void mipsxx_pmu_write_counter(unsigned int idx, u64 val)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		write_c0_perfcntr0(val);
+		return;
+	case 1:
+		write_c0_perfcntr1(val);
+		return;
+	case 2:
+		write_c0_perfcntr2(val);
+		return;
+	case 3:
+		write_c0_perfcntr3(val);
+		return;
+	}
+}
+
+static void mipsxx_pmu_write_counter_64(unsigned int idx, u64 val)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		write_c0_perfcntr0_64(val);
+		return;
+	case 1:
+		write_c0_perfcntr1_64(val);
+		return;
+	case 2:
+		write_c0_perfcntr2_64(val);
+		return;
+	case 3:
+		write_c0_perfcntr3_64(val);
+		return;
+	}
+}
+
+static unsigned int mipsxx_pmu_read_control(unsigned int idx)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		return read_c0_perfctrl0();
+	case 1:
+		return read_c0_perfctrl1();
+	case 2:
+		return read_c0_perfctrl2();
+	case 3:
+		return read_c0_perfctrl3();
+	default:
+		WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
+		return 0;
+	}
+}
+
+static void mipsxx_pmu_write_control(unsigned int idx, unsigned int val)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		write_c0_perfctrl0(val);
+		return;
+	case 1:
+		write_c0_perfctrl1(val);
+		return;
+	case 2:
+		write_c0_perfctrl2(val);
+		return;
+	case 3:
+		write_c0_perfctrl3(val);
+		return;
+	}
+}
+
+static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc,
+				    struct hw_perf_event *hwc)
+{
+	int i;
+
+	/*
+	 * We only need to care the counter mask. The range has been
+	 * checked definitely.
+	 */
+	unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff;
+
+	for (i = mipspmu.num_counters - 1; i >= 0; i--) {
+		/*
+		 * Note that some MIPS perf events can be counted by both
+		 * even and odd counters, wheresas many other are only by
+		 * even _or_ odd counters. This introduces an issue that
+		 * when the former kind of event takes the counter the
+		 * latter kind of event wants to use, then the "counter
+		 * allocation" for the latter event will fail. In fact if
+		 * they can be dynamically swapped, they both feel happy.
+		 * But here we leave this issue alone for now.
+		 */
+		if (test_bit(i, &cntr_mask) &&
+			!test_and_set_bit(i, cpuc->used_mask))
+			return i;
+	}
+
+	return -EAGAIN;
+}
+
+static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+	cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
+		(evt->config_base & M_PERFCTL_CONFIG_MASK) |
+		/* Make sure interrupt enabled. */
+		M_PERFCTL_INTERRUPT_ENABLE;
+	if (IS_ENABLED(CONFIG_CPU_BMIPS5000))
+		/* enable the counter for the calling thread */
+		cpuc->saved_ctrl[idx] |=
+			(1 << (12 + vpe_id())) | M_PERFCTL_TC;
+
+	/*
+	 * We do not actually let the counter run. Leave it until start().
+	 */
+}
+
+static void mipsxx_pmu_disable_event(int idx)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	unsigned long flags;
+
+	WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+	local_irq_save(flags);
+	cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) &
+		~M_PERFCTL_COUNT_EVENT_WHENEVER;
+	mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]);
+	local_irq_restore(flags);
+}
+
+static int mipspmu_event_set_period(struct perf_event *event,
+				    struct hw_perf_event *hwc,
+				    int idx)
+{
+	u64 left = local64_read(&hwc->period_left);
+	u64 period = hwc->sample_period;
+	int ret = 0;
+
+	if (unlikely((left + period) & (1ULL << 63))) {
+		/* left underflowed by more than period. */
+		left = period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	} else	if (unlikely((left + period) <= period)) {
+		/* left underflowed by less than period. */
+		left += period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (left > mipspmu.max_period) {
+		left = mipspmu.max_period;
+		local64_set(&hwc->period_left, left);
+	}
+
+	local64_set(&hwc->prev_count, mipspmu.overflow - left);
+
+	mipspmu.write_counter(idx, mipspmu.overflow - left);
+
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+static void mipspmu_event_update(struct perf_event *event,
+				 struct hw_perf_event *hwc,
+				 int idx)
+{
+	u64 prev_raw_count, new_raw_count;
+	u64 delta;
+
+again:
+	prev_raw_count = local64_read(&hwc->prev_count);
+	new_raw_count = mipspmu.read_counter(idx);
+
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+				new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = new_raw_count - prev_raw_count;
+
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
+}
+
+static void mipspmu_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (flags & PERF_EF_RELOAD)
+		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+
+	hwc->state = 0;
+
+	/* Set the period for the event. */
+	mipspmu_event_set_period(event, hwc, hwc->idx);
+
+	/* Enable the event. */
+	mipsxx_pmu_enable_event(hwc, hwc->idx);
+}
+
+static void mipspmu_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (!(hwc->state & PERF_HES_STOPPED)) {
+		/* We are working on a local event. */
+		mipsxx_pmu_disable_event(hwc->idx);
+		barrier();
+		mipspmu_event_update(event, hwc, hwc->idx);
+		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+	}
+}
+
+static int mipspmu_add(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+	int err = 0;
+
+	perf_pmu_disable(event->pmu);
+
+	/* To look for a free counter for this event. */
+	idx = mipsxx_pmu_alloc_counter(cpuc, hwc);
+	if (idx < 0) {
+		err = idx;
+		goto out;
+	}
+
+	/*
+	 * If there is an event in the counter we are going to use then
+	 * make sure it is disabled.
+	 */
+	event->hw.idx = idx;
+	mipsxx_pmu_disable_event(idx);
+	cpuc->events[idx] = event;
+
+	hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+	if (flags & PERF_EF_START)
+		mipspmu_start(event, PERF_EF_RELOAD);
+
+	/* Propagate our changes to the userspace mapping. */
+	perf_event_update_userpage(event);
+
+out:
+	perf_pmu_enable(event->pmu);
+	return err;
+}
+
+static void mipspmu_del(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+	mipspmu_stop(event, PERF_EF_UPDATE);
+	cpuc->events[idx] = NULL;
+	clear_bit(idx, cpuc->used_mask);
+
+	perf_event_update_userpage(event);
+}
+
+static void mipspmu_read(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	/* Don't read disabled counters! */
+	if (hwc->idx < 0)
+		return;
+
+	mipspmu_event_update(event, hwc, hwc->idx);
+}
+
+static void mipspmu_enable(struct pmu *pmu)
+{
+#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
+	write_unlock(&pmuint_rwlock);
+#endif
+	resume_local_counters();
+}
+
+/*
+ * MIPS performance counters can be per-TC. The control registers can
+ * not be directly accessed accross CPUs. Hence if we want to do global
+ * control, we need cross CPU calls. on_each_cpu() can help us, but we
+ * can not make sure this function is called with interrupts enabled. So
+ * here we pause local counters and then grab a rwlock and leave the
+ * counters on other CPUs alone. If any counter interrupt raises while
+ * we own the write lock, simply pause local counters on that CPU and
+ * spin in the handler. Also we know we won't be switched to another
+ * CPU after pausing local counters and before grabbing the lock.
+ */
+static void mipspmu_disable(struct pmu *pmu)
+{
+	pause_local_counters();
+#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
+	write_lock(&pmuint_rwlock);
+#endif
+}
+
+static atomic_t active_events = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmu_reserve_mutex);
+static int (*save_perf_irq)(void);
+
+static int mipspmu_get_irq(void)
+{
+	int err;
+
+	if (mipspmu.irq >= 0) {
+		/* Request my own irq handler. */
+		err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq,
+				  IRQF_PERCPU | IRQF_NOBALANCING |
+				  IRQF_NO_THREAD | IRQF_NO_SUSPEND |
+				  IRQF_SHARED,
+				  "mips_perf_pmu", &mipspmu);
+		if (err) {
+			pr_warn("Unable to request IRQ%d for MIPS performance counters!\n",
+				mipspmu.irq);
+		}
+	} else if (cp0_perfcount_irq < 0) {
+		/*
+		 * We are sharing the irq number with the timer interrupt.
+		 */
+		save_perf_irq = perf_irq;
+		perf_irq = mipsxx_pmu_handle_shared_irq;
+		err = 0;
+	} else {
+		pr_warn("The platform hasn't properly defined its interrupt controller\n");
+		err = -ENOENT;
+	}
+
+	return err;
+}
+
+static void mipspmu_free_irq(void)
+{
+	if (mipspmu.irq >= 0)
+		free_irq(mipspmu.irq, &mipspmu);
+	else if (cp0_perfcount_irq < 0)
+		perf_irq = save_perf_irq;
+}
+
+/*
+ * mipsxx/rm9000/loongson2 have different performance counters, they have
+ * specific low-level init routines.
+ */
+static void reset_counters(void *arg);
+static int __hw_perf_event_init(struct perf_event *event);
+
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	if (atomic_dec_and_mutex_lock(&active_events,
+				&pmu_reserve_mutex)) {
+		/*
+		 * We must not call the destroy function with interrupts
+		 * disabled.
+		 */
+		on_each_cpu(reset_counters,
+			(void *)(long)mipspmu.num_counters, 1);
+		mipspmu_free_irq();
+		mutex_unlock(&pmu_reserve_mutex);
+	}
+}
+
+static int mipspmu_event_init(struct perf_event *event)
+{
+	int err = 0;
+
+	/* does not support taken branch sampling */
+	if (has_branch_stack(event))
+		return -EOPNOTSUPP;
+
+	switch (event->attr.type) {
+	case PERF_TYPE_RAW:
+	case PERF_TYPE_HARDWARE:
+	case PERF_TYPE_HW_CACHE:
+		break;
+
+	default:
+		return -ENOENT;
+	}
+
+	if (event->cpu >= nr_cpumask_bits ||
+	    (event->cpu >= 0 && !cpu_online(event->cpu)))
+		return -ENODEV;
+
+	if (!atomic_inc_not_zero(&active_events)) {
+		mutex_lock(&pmu_reserve_mutex);
+		if (atomic_read(&active_events) == 0)
+			err = mipspmu_get_irq();
+
+		if (!err)
+			atomic_inc(&active_events);
+		mutex_unlock(&pmu_reserve_mutex);
+	}
+
+	if (err)
+		return err;
+
+	return __hw_perf_event_init(event);
+}
+
+static struct pmu pmu = {
+	.pmu_enable	= mipspmu_enable,
+	.pmu_disable	= mipspmu_disable,
+	.event_init	= mipspmu_event_init,
+	.add		= mipspmu_add,
+	.del		= mipspmu_del,
+	.start		= mipspmu_start,
+	.stop		= mipspmu_stop,
+	.read		= mipspmu_read,
+};
+
+static unsigned int mipspmu_perf_event_encode(const struct mips_perf_event *pev)
+{
+/*
+ * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for
+ * event_id.
+ */
+#ifdef CONFIG_MIPS_MT_SMP
+	return ((unsigned int)pev->range << 24) |
+		(pev->cntr_mask & 0xffff00) |
+		(pev->event_id & 0xff);
+#else
+	return (pev->cntr_mask & 0xffff00) |
+		(pev->event_id & 0xff);
+#endif
+}
+
+static const struct mips_perf_event *mipspmu_map_general_event(int idx)
+{
+
+	if ((*mipspmu.general_event_map)[idx].cntr_mask == 0)
+		return ERR_PTR(-EOPNOTSUPP);
+	return &(*mipspmu.general_event_map)[idx];
+}
+
+static const struct mips_perf_event *mipspmu_map_cache_event(u64 config)
+{
+	unsigned int cache_type, cache_op, cache_result;
+	const struct mips_perf_event *pev;
+
+	cache_type = (config >> 0) & 0xff;
+	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+		return ERR_PTR(-EINVAL);
+
+	cache_op = (config >> 8) & 0xff;
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+		return ERR_PTR(-EINVAL);
+
+	cache_result = (config >> 16) & 0xff;
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return ERR_PTR(-EINVAL);
+
+	pev = &((*mipspmu.cache_event_map)
+					[cache_type]
+					[cache_op]
+					[cache_result]);
+
+	if (pev->cntr_mask == 0)
+		return ERR_PTR(-EOPNOTSUPP);
+
+	return pev;
+
+}
+
+static int validate_group(struct perf_event *event)
+{
+	struct perf_event *sibling, *leader = event->group_leader;
+	struct cpu_hw_events fake_cpuc;
+
+	memset(&fake_cpuc, 0, sizeof(fake_cpuc));
+
+	if (mipsxx_pmu_alloc_counter(&fake_cpuc, &leader->hw) < 0)
+		return -EINVAL;
+
+	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+		if (mipsxx_pmu_alloc_counter(&fake_cpuc, &sibling->hw) < 0)
+			return -EINVAL;
+	}
+
+	if (mipsxx_pmu_alloc_counter(&fake_cpuc, &event->hw) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+/* This is needed by specific irq handlers in perf_event_*.c */
+static void handle_associated_event(struct cpu_hw_events *cpuc,
+				    int idx, struct perf_sample_data *data,
+				    struct pt_regs *regs)
+{
+	struct perf_event *event = cpuc->events[idx];
+	struct hw_perf_event *hwc = &event->hw;
+
+	mipspmu_event_update(event, hwc, idx);
+	data->period = event->hw.last_period;
+	if (!mipspmu_event_set_period(event, hwc, idx))
+		return;
+
+	if (perf_event_overflow(event, data, regs))
+		mipsxx_pmu_disable_event(idx);
+}
+
+
+static int __n_counters(void)
+{
+	if (!(read_c0_config1() & M_CONFIG1_PC))
+		return 0;
+	if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
+		return 1;
+	if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
+		return 2;
+	if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
+		return 3;
+
+	return 4;
+}
+
+static int n_counters(void)
+{
+	int counters;
+
+	switch (current_cpu_type()) {
+	case CPU_R10000:
+		counters = 2;
+		break;
+
+	case CPU_R12000:
+	case CPU_R14000:
+	case CPU_R16000:
+		counters = 4;
+		break;
+
+	default:
+		counters = __n_counters();
+	}
+
+	return counters;
+}
+
+static void reset_counters(void *arg)
+{
+	int counters = (int)(long)arg;
+	switch (counters) {
+	case 4:
+		mipsxx_pmu_write_control(3, 0);
+		mipspmu.write_counter(3, 0);
+	case 3:
+		mipsxx_pmu_write_control(2, 0);
+		mipspmu.write_counter(2, 0);
+	case 2:
+		mipsxx_pmu_write_control(1, 0);
+		mipspmu.write_counter(1, 0);
+	case 1:
+		mipsxx_pmu_write_control(0, 0);
+		mipspmu.write_counter(0, 0);
+	}
+}
+
+/* 24K/34K/1004K/interAptiv/loongson1 cores share the same event map. */
+static const struct mips_perf_event mipsxxcore_event_map
+				[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T },
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x02, CNTR_EVEN, T },
+	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T },
+};
+
+/* 74K/proAptiv core has different branch event code. */
+static const struct mips_perf_event mipsxxcore_event_map2
+				[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T },
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x27, CNTR_EVEN, T },
+	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x27, CNTR_ODD, T },
+};
+
+static const struct mips_perf_event loongson3_event_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x00, CNTR_ODD },
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x01, CNTR_EVEN },
+	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x01, CNTR_ODD },
+};
+
+static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL },
+	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x2b, CNTR_ALL },
+	[PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL	 },
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x08, CNTR_ALL },
+	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x09, CNTR_ALL },
+	[PERF_COUNT_HW_BUS_CYCLES] = { 0x25, CNTR_ALL },
+};
+
+static const struct mips_perf_event bmips5000_event_map
+				[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, T },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T },
+	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T },
+};
+
+static const struct mips_perf_event xlp_event_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x18, CNTR_ALL }, /* PAPI_TOT_INS */
+	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x04, CNTR_ALL }, /* PAPI_L1_ICA */
+	[PERF_COUNT_HW_CACHE_MISSES] = { 0x07, CNTR_ALL }, /* PAPI_L1_ICM */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x1b, CNTR_ALL }, /* PAPI_BR_CN */
+	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x1c, CNTR_ALL }, /* PAPI_BR_MSP */
+};
+
+/* 24K/34K/1004K/interAptiv/loongson1 cores share the same cache event map. */
+static const struct mips_perf_event mipsxxcore_cache_map
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+	/*
+	 * Like some other architectures (e.g. ARM), the performance
+	 * counters don't differentiate between read and write
+	 * accesses/misses, so this isn't strictly correct, but it's the
+	 * best we can do. Writes and reads get combined.
+	 */
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x0a, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x0b, CNTR_EVEN | CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x0a, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x0b, CNTR_EVEN | CNTR_ODD, T },
+	},
+},
+[C(L1I)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x09, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x09, CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x09, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x09, CNTR_ODD, T },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)]	= { 0x14, CNTR_EVEN, T },
+		/*
+		 * Note that MIPS has only "hit" events countable for
+		 * the prefetch operation.
+		 */
+	},
+},
+[C(LL)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x15, CNTR_ODD, P },
+		[C(RESULT_MISS)]	= { 0x16, CNTR_EVEN, P },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x15, CNTR_ODD, P },
+		[C(RESULT_MISS)]	= { 0x16, CNTR_EVEN, P },
+	},
+},
+[C(DTLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x06, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x06, CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x06, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x06, CNTR_ODD, T },
+	},
+},
+[C(ITLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x05, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x05, CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x05, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x05, CNTR_ODD, T },
+	},
+},
+[C(BPU)] = {
+	/* Using the same code for *HW_BRANCH* */
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x02, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x02, CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x02, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x02, CNTR_ODD, T },
+	},
+},
+};
+
+/* 74K/proAptiv core has completely different cache event map. */
+static const struct mips_perf_event mipsxxcore_cache_map2
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+	/*
+	 * Like some other architectures (e.g. ARM), the performance
+	 * counters don't differentiate between read and write
+	 * accesses/misses, so this isn't strictly correct, but it's the
+	 * best we can do. Writes and reads get combined.
+	 */
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x17, CNTR_ODD, T },
+		[C(RESULT_MISS)]	= { 0x18, CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x17, CNTR_ODD, T },
+		[C(RESULT_MISS)]	= { 0x18, CNTR_ODD, T },
+	},
+},
+[C(L1I)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x06, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x06, CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x06, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x06, CNTR_ODD, T },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)]	= { 0x34, CNTR_EVEN, T },
+		/*
+		 * Note that MIPS has only "hit" events countable for
+		 * the prefetch operation.
+		 */
+	},
+},
+[C(LL)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x1c, CNTR_ODD, P },
+		[C(RESULT_MISS)]	= { 0x1d, CNTR_EVEN, P },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x1c, CNTR_ODD, P },
+		[C(RESULT_MISS)]	= { 0x1d, CNTR_EVEN, P },
+	},
+},
+/*
+ * 74K core does not have specific DTLB events. proAptiv core has
+ * "speculative" DTLB events which are numbered 0x63 (even/odd) and
+ * not included here. One can use raw events if really needed.
+ */
+[C(ITLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x04, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x04, CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x04, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x04, CNTR_ODD, T },
+	},
+},
+[C(BPU)] = {
+	/* Using the same code for *HW_BRANCH* */
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x27, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x27, CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x27, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 0x27, CNTR_ODD, T },
+	},
+},
+};
+
+static const struct mips_perf_event loongson3_cache_map
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+	/*
+	 * Like some other architectures (e.g. ARM), the performance
+	 * counters don't differentiate between read and write
+	 * accesses/misses, so this isn't strictly correct, but it's the
+	 * best we can do. Writes and reads get combined.
+	 */
+	[C(OP_READ)] = {
+		[C(RESULT_MISS)]        = { 0x04, CNTR_ODD },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_MISS)]        = { 0x04, CNTR_ODD },
+	},
+},
+[C(L1I)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_MISS)]        = { 0x04, CNTR_EVEN },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_MISS)]        = { 0x04, CNTR_EVEN },
+	},
+},
+[C(DTLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_MISS)]        = { 0x09, CNTR_ODD },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_MISS)]        = { 0x09, CNTR_ODD },
+	},
+},
+[C(ITLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_MISS)]        = { 0x0c, CNTR_ODD },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_MISS)]        = { 0x0c, CNTR_ODD },
+	},
+},
+[C(BPU)] = {
+	/* Using the same code for *HW_BRANCH* */
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]      = { 0x02, CNTR_EVEN },
+		[C(RESULT_MISS)]        = { 0x02, CNTR_ODD },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]      = { 0x02, CNTR_EVEN },
+		[C(RESULT_MISS)]        = { 0x02, CNTR_ODD },
+	},
+},
+};
+
+/* BMIPS5000 */
+static const struct mips_perf_event bmips5000_cache_map
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+	/*
+	 * Like some other architectures (e.g. ARM), the performance
+	 * counters don't differentiate between read and write
+	 * accesses/misses, so this isn't strictly correct, but it's the
+	 * best we can do. Writes and reads get combined.
+	 */
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 12, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 12, CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 12, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 12, CNTR_ODD, T },
+	},
+},
+[C(L1I)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 10, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 10, CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 10, CNTR_EVEN, T },
+		[C(RESULT_MISS)]	= { 10, CNTR_ODD, T },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)]	= { 23, CNTR_EVEN, T },
+		/*
+		 * Note that MIPS has only "hit" events countable for
+		 * the prefetch operation.
+		 */
+	},
+},
+[C(LL)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 28, CNTR_EVEN, P },
+		[C(RESULT_MISS)]	= { 28, CNTR_ODD, P },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 28, CNTR_EVEN, P },
+		[C(RESULT_MISS)]	= { 28, CNTR_ODD, P },
+	},
+},
+[C(BPU)] = {
+	/* Using the same code for *HW_BRANCH* */
+	[C(OP_READ)] = {
+		[C(RESULT_MISS)]	= { 0x02, CNTR_ODD, T },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_MISS)]	= { 0x02, CNTR_ODD, T },
+	},
+},
+};
+
+
+static const struct mips_perf_event octeon_cache_map
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x2b, CNTR_ALL },
+		[C(RESULT_MISS)]	= { 0x2e, CNTR_ALL },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x30, CNTR_ALL },
+	},
+},
+[C(L1I)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x18, CNTR_ALL },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)]	= { 0x19, CNTR_ALL },
+	},
+},
+[C(DTLB)] = {
+	/*
+	 * Only general DTLB misses are counted use the same event for
+	 * read and write.
+	 */
+	[C(OP_READ)] = {
+		[C(RESULT_MISS)]	= { 0x35, CNTR_ALL },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_MISS)]	= { 0x35, CNTR_ALL },
+	},
+},
+[C(ITLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_MISS)]	= { 0x37, CNTR_ALL },
+	},
+},
+};
+
+static const struct mips_perf_event xlp_cache_map
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x31, CNTR_ALL }, /* PAPI_L1_DCR */
+		[C(RESULT_MISS)]	= { 0x30, CNTR_ALL }, /* PAPI_L1_LDM */
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x2f, CNTR_ALL }, /* PAPI_L1_DCW */
+		[C(RESULT_MISS)]	= { 0x2e, CNTR_ALL }, /* PAPI_L1_STM */
+	},
+},
+[C(L1I)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x04, CNTR_ALL }, /* PAPI_L1_ICA */
+		[C(RESULT_MISS)]	= { 0x07, CNTR_ALL }, /* PAPI_L1_ICM */
+	},
+},
+[C(LL)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x35, CNTR_ALL }, /* PAPI_L2_DCR */
+		[C(RESULT_MISS)]	= { 0x37, CNTR_ALL }, /* PAPI_L2_LDM */
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x34, CNTR_ALL }, /* PAPI_L2_DCA */
+		[C(RESULT_MISS)]	= { 0x36, CNTR_ALL }, /* PAPI_L2_DCM */
+	},
+},
+[C(DTLB)] = {
+	/*
+	 * Only general DTLB misses are counted use the same event for
+	 * read and write.
+	 */
+	[C(OP_READ)] = {
+		[C(RESULT_MISS)]	= { 0x2d, CNTR_ALL }, /* PAPI_TLB_DM */
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_MISS)]	= { 0x2d, CNTR_ALL }, /* PAPI_TLB_DM */
+	},
+},
+[C(ITLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_MISS)]	= { 0x08, CNTR_ALL }, /* PAPI_TLB_IM */
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_MISS)]	= { 0x08, CNTR_ALL }, /* PAPI_TLB_IM */
+	},
+},
+[C(BPU)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_MISS)]	= { 0x25, CNTR_ALL },
+	},
+},
+};
+
+#ifdef CONFIG_MIPS_MT_SMP
+static void check_and_calc_range(struct perf_event *event,
+				 const struct mips_perf_event *pev)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (event->cpu >= 0) {
+		if (pev->range > V) {
+			/*
+			 * The user selected an event that is processor
+			 * wide, while expecting it to be VPE wide.
+			 */
+			hwc->config_base |= M_TC_EN_ALL;
+		} else {
+			/*
+			 * FIXME: cpu_data[event->cpu].vpe_id reports 0
+			 * for both CPUs.
+			 */
+			hwc->config_base |= M_PERFCTL_VPEID(event->cpu);
+			hwc->config_base |= M_TC_EN_VPE;
+		}
+	} else
+		hwc->config_base |= M_TC_EN_ALL;
+}
+#else
+static void check_and_calc_range(struct perf_event *event,
+				 const struct mips_perf_event *pev)
+{
+}
+#endif
+
+static int __hw_perf_event_init(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	struct hw_perf_event *hwc = &event->hw;
+	const struct mips_perf_event *pev;
+	int err;
+
+	/* Returning MIPS event descriptor for generic perf event. */
+	if (PERF_TYPE_HARDWARE == event->attr.type) {
+		if (event->attr.config >= PERF_COUNT_HW_MAX)
+			return -EINVAL;
+		pev = mipspmu_map_general_event(event->attr.config);
+	} else if (PERF_TYPE_HW_CACHE == event->attr.type) {
+		pev = mipspmu_map_cache_event(event->attr.config);
+	} else if (PERF_TYPE_RAW == event->attr.type) {
+		/* We are working on the global raw event. */
+		mutex_lock(&raw_event_mutex);
+		pev = mipspmu.map_raw_event(event->attr.config);
+	} else {
+		/* The event type is not (yet) supported. */
+		return -EOPNOTSUPP;
+	}
+
+	if (IS_ERR(pev)) {
+		if (PERF_TYPE_RAW == event->attr.type)
+			mutex_unlock(&raw_event_mutex);
+		return PTR_ERR(pev);
+	}
+
+	/*
+	 * We allow max flexibility on how each individual counter shared
+	 * by the single CPU operates (the mode exclusion and the range).
+	 */
+	hwc->config_base = M_PERFCTL_INTERRUPT_ENABLE;
+
+	/* Calculate range bits and validate it. */
+	if (num_possible_cpus() > 1)
+		check_and_calc_range(event, pev);
+
+	hwc->event_base = mipspmu_perf_event_encode(pev);
+	if (PERF_TYPE_RAW == event->attr.type)
+		mutex_unlock(&raw_event_mutex);
+
+	if (!attr->exclude_user)
+		hwc->config_base |= M_PERFCTL_USER;
+	if (!attr->exclude_kernel) {
+		hwc->config_base |= M_PERFCTL_KERNEL;
+		/* MIPS kernel mode: KSU == 00b || EXL == 1 || ERL == 1 */
+		hwc->config_base |= M_PERFCTL_EXL;
+	}
+	if (!attr->exclude_hv)
+		hwc->config_base |= M_PERFCTL_SUPERVISOR;
+
+	hwc->config_base &= M_PERFCTL_CONFIG_MASK;
+	/*
+	 * The event can belong to another cpu. We do not assign a local
+	 * counter for it for now.
+	 */
+	hwc->idx = -1;
+	hwc->config = 0;
+
+	if (!hwc->sample_period) {
+		hwc->sample_period  = mipspmu.max_period;
+		hwc->last_period    = hwc->sample_period;
+		local64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	err = 0;
+	if (event->group_leader != event)
+		err = validate_group(event);
+
+	event->destroy = hw_perf_event_destroy;
+
+	if (err)
+		event->destroy(event);
+
+	return err;
+}
+
+static void pause_local_counters(void)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	int ctr = mipspmu.num_counters;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	do {
+		ctr--;
+		cpuc->saved_ctrl[ctr] = mipsxx_pmu_read_control(ctr);
+		mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr] &
+					 ~M_PERFCTL_COUNT_EVENT_WHENEVER);
+	} while (ctr > 0);
+	local_irq_restore(flags);
+}
+
+static void resume_local_counters(void)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	int ctr = mipspmu.num_counters;
+
+	do {
+		ctr--;
+		mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr]);
+	} while (ctr > 0);
+}
+
+static int mipsxx_pmu_handle_shared_irq(void)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct perf_sample_data data;
+	unsigned int counters = mipspmu.num_counters;
+	u64 counter;
+	int handled = IRQ_NONE;
+	struct pt_regs *regs;
+
+	if (cpu_has_perf_cntr_intr_bit && !(read_c0_cause() & CAUSEF_PCI))
+		return handled;
+	/*
+	 * First we pause the local counters, so that when we are locked
+	 * here, the counters are all paused. When it gets locked due to
+	 * perf_disable(), the timer interrupt handler will be delayed.
+	 *
+	 * See also mipsxx_pmu_start().
+	 */
+	pause_local_counters();
+#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
+	read_lock(&pmuint_rwlock);
+#endif
+
+	regs = get_irq_regs();
+
+	perf_sample_data_init(&data, 0, 0);
+
+	switch (counters) {
+#define HANDLE_COUNTER(n)						\
+	case n + 1:							\
+		if (test_bit(n, cpuc->used_mask)) {			\
+			counter = mipspmu.read_counter(n);		\
+			if (counter & mipspmu.overflow) {		\
+				handle_associated_event(cpuc, n, &data, regs); \
+				handled = IRQ_HANDLED;			\
+			}						\
+		}
+	HANDLE_COUNTER(3)
+	HANDLE_COUNTER(2)
+	HANDLE_COUNTER(1)
+	HANDLE_COUNTER(0)
+	}
+
+	/*
+	 * Do all the work for the pending perf events. We can do this
+	 * in here because the performance counter interrupt is a regular
+	 * interrupt, not NMI.
+	 */
+	if (handled == IRQ_HANDLED)
+		irq_work_run();
+
+#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
+	read_unlock(&pmuint_rwlock);
+#endif
+	resume_local_counters();
+	return handled;
+}
+
+static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev)
+{
+	return mipsxx_pmu_handle_shared_irq();
+}
+
+/* 24K */
+#define IS_BOTH_COUNTERS_24K_EVENT(b)					\
+	((b) == 0 || (b) == 1 || (b) == 11)
+
+/* 34K */
+#define IS_BOTH_COUNTERS_34K_EVENT(b)					\
+	((b) == 0 || (b) == 1 || (b) == 11)
+#ifdef CONFIG_MIPS_MT_SMP
+#define IS_RANGE_P_34K_EVENT(r, b)					\
+	((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 ||		\
+	 (b) == 25 || (b) == 39 || (r) == 44 || (r) == 174 ||		\
+	 (r) == 176 || ((b) >= 50 && (b) <= 55) ||			\
+	 ((b) >= 64 && (b) <= 67))
+#define IS_RANGE_V_34K_EVENT(r) ((r) == 47)
+#endif
+
+/* 74K */
+#define IS_BOTH_COUNTERS_74K_EVENT(b)					\
+	((b) == 0 || (b) == 1)
+
+/* proAptiv */
+#define IS_BOTH_COUNTERS_PROAPTIV_EVENT(b)				\
+	((b) == 0 || (b) == 1)
+/* P5600 */
+#define IS_BOTH_COUNTERS_P5600_EVENT(b)					\
+	((b) == 0 || (b) == 1)
+
+/* 1004K */
+#define IS_BOTH_COUNTERS_1004K_EVENT(b)					\
+	((b) == 0 || (b) == 1 || (b) == 11)
+#ifdef CONFIG_MIPS_MT_SMP
+#define IS_RANGE_P_1004K_EVENT(r, b)					\
+	((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 ||		\
+	 (b) == 25 || (b) == 36 || (b) == 39 || (r) == 44 ||		\
+	 (r) == 174 || (r) == 176 || ((b) >= 50 && (b) <= 59) ||	\
+	 (r) == 188 || (b) == 61 || (b) == 62 ||			\
+	 ((b) >= 64 && (b) <= 67))
+#define IS_RANGE_V_1004K_EVENT(r)	((r) == 47)
+#endif
+
+/* interAptiv */
+#define IS_BOTH_COUNTERS_INTERAPTIV_EVENT(b)				\
+	((b) == 0 || (b) == 1 || (b) == 11)
+#ifdef CONFIG_MIPS_MT_SMP
+/* The P/V/T info is not provided for "(b) == 38" in SUM, assume P. */
+#define IS_RANGE_P_INTERAPTIV_EVENT(r, b)				\
+	((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 ||		\
+	 (b) == 25 || (b) == 36 || (b) == 38 || (b) == 39 ||		\
+	 (r) == 44 || (r) == 174 || (r) == 176 || ((b) >= 50 &&		\
+	 (b) <= 59) || (r) == 188 || (b) == 61 || (b) == 62 ||		\
+	 ((b) >= 64 && (b) <= 67))
+#define IS_RANGE_V_INTERAPTIV_EVENT(r)	((r) == 47 || (r) == 175)
+#endif
+
+/* BMIPS5000 */
+#define IS_BOTH_COUNTERS_BMIPS5000_EVENT(b)				\
+	((b) == 0 || (b) == 1)
+
+
+/*
+ * For most cores the user can use 0-255 raw events, where 0-127 for the events
+ * of even counters, and 128-255 for odd counters. Note that bit 7 is used to
+ * indicate the even/odd bank selector. So, for example, when user wants to take
+ * the Event Num of 15 for odd counters (by referring to the user manual), then
+ * 128 needs to be added to 15 as the input for the event config, i.e., 143 (0x8F)
+ * to be used.
+ *
+ * Some newer cores have even more events, in which case the user can use raw
+ * events 0-511, where 0-255 are for the events of even counters, and 256-511
+ * are for odd counters, so bit 8 is used to indicate the even/odd bank selector.
+ */
+static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
+{
+	/* currently most cores have 7-bit event numbers */
+	unsigned int raw_id = config & 0xff;
+	unsigned int base_id = raw_id & 0x7f;
+
+	switch (current_cpu_type()) {
+	case CPU_24K:
+		if (IS_BOTH_COUNTERS_24K_EVENT(base_id))
+			raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
+		else
+			raw_event.cntr_mask =
+				raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
+#ifdef CONFIG_MIPS_MT_SMP
+		/*
+		 * This is actually doing nothing. Non-multithreading
+		 * CPUs will not check and calculate the range.
+		 */
+		raw_event.range = P;
+#endif
+		break;
+	case CPU_34K:
+		if (IS_BOTH_COUNTERS_34K_EVENT(base_id))
+			raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
+		else
+			raw_event.cntr_mask =
+				raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
+#ifdef CONFIG_MIPS_MT_SMP
+		if (IS_RANGE_P_34K_EVENT(raw_id, base_id))
+			raw_event.range = P;
+		else if (unlikely(IS_RANGE_V_34K_EVENT(raw_id)))
+			raw_event.range = V;
+		else
+			raw_event.range = T;
+#endif
+		break;
+	case CPU_74K:
+	case CPU_1074K:
+		if (IS_BOTH_COUNTERS_74K_EVENT(base_id))
+			raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
+		else
+			raw_event.cntr_mask =
+				raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
+#ifdef CONFIG_MIPS_MT_SMP
+		raw_event.range = P;
+#endif
+		break;
+	case CPU_PROAPTIV:
+		if (IS_BOTH_COUNTERS_PROAPTIV_EVENT(base_id))
+			raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
+		else
+			raw_event.cntr_mask =
+				raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
+#ifdef CONFIG_MIPS_MT_SMP
+		raw_event.range = P;
+#endif
+		break;
+	case CPU_P5600:
+		/* 8-bit event numbers */
+		raw_id = config & 0x1ff;
+		base_id = raw_id & 0xff;
+		if (IS_BOTH_COUNTERS_P5600_EVENT(base_id))
+			raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
+		else
+			raw_event.cntr_mask =
+				raw_id > 255 ? CNTR_ODD : CNTR_EVEN;
+#ifdef CONFIG_MIPS_MT_SMP
+		raw_event.range = P;
+#endif
+		break;
+	case CPU_1004K:
+		if (IS_BOTH_COUNTERS_1004K_EVENT(base_id))
+			raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
+		else
+			raw_event.cntr_mask =
+				raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
+#ifdef CONFIG_MIPS_MT_SMP
+		if (IS_RANGE_P_1004K_EVENT(raw_id, base_id))
+			raw_event.range = P;
+		else if (unlikely(IS_RANGE_V_1004K_EVENT(raw_id)))
+			raw_event.range = V;
+		else
+			raw_event.range = T;
+#endif
+		break;
+	case CPU_INTERAPTIV:
+		if (IS_BOTH_COUNTERS_INTERAPTIV_EVENT(base_id))
+			raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
+		else
+			raw_event.cntr_mask =
+				raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
+#ifdef CONFIG_MIPS_MT_SMP
+		if (IS_RANGE_P_INTERAPTIV_EVENT(raw_id, base_id))
+			raw_event.range = P;
+		else if (unlikely(IS_RANGE_V_INTERAPTIV_EVENT(raw_id)))
+			raw_event.range = V;
+		else
+			raw_event.range = T;
+#endif
+		break;
+	case CPU_BMIPS5000:
+		if (IS_BOTH_COUNTERS_BMIPS5000_EVENT(base_id))
+			raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
+		else
+			raw_event.cntr_mask =
+				raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
+		break;
+	case CPU_LOONGSON3:
+		raw_event.cntr_mask = raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
+	break;
+	}
+
+	raw_event.event_id = base_id;
+
+	return &raw_event;
+}
+
+static const struct mips_perf_event *octeon_pmu_map_raw_event(u64 config)
+{
+	unsigned int raw_id = config & 0xff;
+	unsigned int base_id = raw_id & 0x7f;
+
+
+	raw_event.cntr_mask = CNTR_ALL;
+	raw_event.event_id = base_id;
+
+	if (current_cpu_type() == CPU_CAVIUM_OCTEON2) {
+		if (base_id > 0x42)
+			return ERR_PTR(-EOPNOTSUPP);
+	} else {
+		if (base_id > 0x3a)
+			return ERR_PTR(-EOPNOTSUPP);
+	}
+
+	switch (base_id) {
+	case 0x00:
+	case 0x0f:
+	case 0x1e:
+	case 0x1f:
+	case 0x2f:
+	case 0x34:
+	case 0x3b ... 0x3f:
+		return ERR_PTR(-EOPNOTSUPP);
+	default:
+		break;
+	}
+
+	return &raw_event;
+}
+
+static const struct mips_perf_event *xlp_pmu_map_raw_event(u64 config)
+{
+	unsigned int raw_id = config & 0xff;
+
+	/* Only 1-63 are defined */
+	if ((raw_id < 0x01) || (raw_id > 0x3f))
+		return ERR_PTR(-EOPNOTSUPP);
+
+	raw_event.cntr_mask = CNTR_ALL;
+	raw_event.event_id = raw_id;
+
+	return &raw_event;
+}
+
+static int __init
+init_hw_perf_events(void)
+{
+	int counters, irq;
+	int counter_bits;
+
+	pr_info("Performance counters: ");
+
+	counters = n_counters();
+	if (counters == 0) {
+		pr_cont("No available PMU.\n");
+		return -ENODEV;
+	}
+
+#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
+	cpu_has_mipsmt_pertccounters = read_c0_config7() & (1<<19);
+	if (!cpu_has_mipsmt_pertccounters)
+		counters = counters_total_to_per_cpu(counters);
+#endif
+
+	if (get_c0_perfcount_int)
+		irq = get_c0_perfcount_int();
+	else if (cp0_perfcount_irq >= 0)
+		irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+	else
+		irq = -1;
+
+	mipspmu.map_raw_event = mipsxx_pmu_map_raw_event;
+
+	switch (current_cpu_type()) {
+	case CPU_24K:
+		mipspmu.name = "mips/24K";
+		mipspmu.general_event_map = &mipsxxcore_event_map;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map;
+		break;
+	case CPU_34K:
+		mipspmu.name = "mips/34K";
+		mipspmu.general_event_map = &mipsxxcore_event_map;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map;
+		break;
+	case CPU_74K:
+		mipspmu.name = "mips/74K";
+		mipspmu.general_event_map = &mipsxxcore_event_map2;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map2;
+		break;
+	case CPU_PROAPTIV:
+		mipspmu.name = "mips/proAptiv";
+		mipspmu.general_event_map = &mipsxxcore_event_map2;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map2;
+		break;
+	case CPU_P5600:
+		mipspmu.name = "mips/P5600";
+		mipspmu.general_event_map = &mipsxxcore_event_map2;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map2;
+		break;
+	case CPU_1004K:
+		mipspmu.name = "mips/1004K";
+		mipspmu.general_event_map = &mipsxxcore_event_map;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map;
+		break;
+	case CPU_1074K:
+		mipspmu.name = "mips/1074K";
+		mipspmu.general_event_map = &mipsxxcore_event_map;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map;
+		break;
+	case CPU_INTERAPTIV:
+		mipspmu.name = "mips/interAptiv";
+		mipspmu.general_event_map = &mipsxxcore_event_map;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map;
+		break;
+	case CPU_LOONGSON1:
+		mipspmu.name = "mips/loongson1";
+		mipspmu.general_event_map = &mipsxxcore_event_map;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map;
+		break;
+	case CPU_LOONGSON3:
+		mipspmu.name = "mips/loongson3";
+		mipspmu.general_event_map = &loongson3_event_map;
+		mipspmu.cache_event_map = &loongson3_cache_map;
+		break;
+	case CPU_CAVIUM_OCTEON:
+	case CPU_CAVIUM_OCTEON_PLUS:
+	case CPU_CAVIUM_OCTEON2:
+		mipspmu.name = "octeon";
+		mipspmu.general_event_map = &octeon_event_map;
+		mipspmu.cache_event_map = &octeon_cache_map;
+		mipspmu.map_raw_event = octeon_pmu_map_raw_event;
+		break;
+	case CPU_BMIPS5000:
+		mipspmu.name = "BMIPS5000";
+		mipspmu.general_event_map = &bmips5000_event_map;
+		mipspmu.cache_event_map = &bmips5000_cache_map;
+		break;
+	case CPU_XLP:
+		mipspmu.name = "xlp";
+		mipspmu.general_event_map = &xlp_event_map;
+		mipspmu.cache_event_map = &xlp_cache_map;
+		mipspmu.map_raw_event = xlp_pmu_map_raw_event;
+		break;
+	default:
+		pr_cont("Either hardware does not support performance "
+			"counters, or not yet implemented.\n");
+		return -ENODEV;
+	}
+
+	mipspmu.num_counters = counters;
+	mipspmu.irq = irq;
+
+	if (read_c0_perfctrl0() & M_PERFCTL_WIDE) {
+		mipspmu.max_period = (1ULL << 63) - 1;
+		mipspmu.valid_count = (1ULL << 63) - 1;
+		mipspmu.overflow = 1ULL << 63;
+		mipspmu.read_counter = mipsxx_pmu_read_counter_64;
+		mipspmu.write_counter = mipsxx_pmu_write_counter_64;
+		counter_bits = 64;
+	} else {
+		mipspmu.max_period = (1ULL << 31) - 1;
+		mipspmu.valid_count = (1ULL << 31) - 1;
+		mipspmu.overflow = 1ULL << 31;
+		mipspmu.read_counter = mipsxx_pmu_read_counter;
+		mipspmu.write_counter = mipsxx_pmu_write_counter;
+		counter_bits = 32;
+	}
+
+	on_each_cpu(reset_counters, (void *)(long)counters, 1);
+
+	pr_cont("%s PMU enabled, %d %d-bit counters available to each "
+		"CPU, irq %d%s\n", mipspmu.name, counters, counter_bits, irq,
+		irq < 0 ? " (share with timer interrupt)" : "");
+
+	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
+
+	return 0;
+}
+early_initcall(init_hw_perf_events);
diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c
new file mode 100644
index 000000000..06147179a
--- /dev/null
+++ b/arch/mips/kernel/pm-cps.c
@@ -0,0 +1,724 @@
+/*
+ * Copyright (C) 2014 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/slab.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/cacheflush.h>
+#include <asm/cacheops.h>
+#include <asm/idle.h>
+#include <asm/mips-cm.h>
+#include <asm/mips-cpc.h>
+#include <asm/mipsmtregs.h>
+#include <asm/pm.h>
+#include <asm/pm-cps.h>
+#include <asm/smp-cps.h>
+#include <asm/uasm.h>
+
+/*
+ * cps_nc_entry_fn - type of a generated non-coherent state entry function
+ * @online: the count of online coupled VPEs
+ * @nc_ready_count: pointer to a non-coherent mapping of the core ready_count
+ *
+ * The code entering & exiting non-coherent states is generated at runtime
+ * using uasm, in order to ensure that the compiler cannot insert a stray
+ * memory access at an unfortunate time and to allow the generation of optimal
+ * core-specific code particularly for cache routines. If coupled_coherence
+ * is non-zero and this is the entry function for the CPS_PM_NC_WAIT state,
+ * returns the number of VPEs that were in the wait state at the point this
+ * VPE left it. Returns garbage if coupled_coherence is zero or this is not
+ * the entry function for CPS_PM_NC_WAIT.
+ */
+typedef unsigned (*cps_nc_entry_fn)(unsigned online, u32 *nc_ready_count);
+
+/*
+ * The entry point of the generated non-coherent idle state entry/exit
+ * functions. Actually per-core rather than per-CPU.
+ */
+static DEFINE_PER_CPU_READ_MOSTLY(cps_nc_entry_fn[CPS_PM_STATE_COUNT],
+				  nc_asm_enter);
+
+/* Bitmap indicating which states are supported by the system */
+DECLARE_BITMAP(state_support, CPS_PM_STATE_COUNT);
+
+/*
+ * Indicates the number of coupled VPEs ready to operate in a non-coherent
+ * state. Actually per-core rather than per-CPU.
+ */
+static DEFINE_PER_CPU_ALIGNED(u32*, ready_count);
+static DEFINE_PER_CPU_ALIGNED(void*, ready_count_alloc);
+
+/* Indicates online CPUs coupled with the current CPU */
+static DEFINE_PER_CPU_ALIGNED(cpumask_t, online_coupled);
+
+/*
+ * Used to synchronize entry to deep idle states. Actually per-core rather
+ * than per-CPU.
+ */
+static DEFINE_PER_CPU_ALIGNED(atomic_t, pm_barrier);
+
+/* Saved CPU state across the CPS_PM_POWER_GATED state */
+DEFINE_PER_CPU_ALIGNED(struct mips_static_suspend_state, cps_cpu_state);
+
+/* A somewhat arbitrary number of labels & relocs for uasm */
+static struct uasm_label labels[32] __initdata;
+static struct uasm_reloc relocs[32] __initdata;
+
+/* CPU dependant sync types */
+static unsigned stype_intervention;
+static unsigned stype_memory;
+static unsigned stype_ordering;
+
+enum mips_reg {
+	zero, at, v0, v1, a0, a1, a2, a3,
+	t0, t1, t2, t3, t4, t5, t6, t7,
+	s0, s1, s2, s3, s4, s5, s6, s7,
+	t8, t9, k0, k1, gp, sp, fp, ra,
+};
+
+bool cps_pm_support_state(enum cps_pm_state state)
+{
+	return test_bit(state, state_support);
+}
+
+static void coupled_barrier(atomic_t *a, unsigned online)
+{
+	/*
+	 * This function is effectively the same as
+	 * cpuidle_coupled_parallel_barrier, which can't be used here since
+	 * there's no cpuidle device.
+	 */
+
+	if (!coupled_coherence)
+		return;
+
+	smp_mb__before_atomic();
+	atomic_inc(a);
+
+	while (atomic_read(a) < online)
+		cpu_relax();
+
+	if (atomic_inc_return(a) == online * 2) {
+		atomic_set(a, 0);
+		return;
+	}
+
+	while (atomic_read(a) > online)
+		cpu_relax();
+}
+
+int cps_pm_enter_state(enum cps_pm_state state)
+{
+	unsigned cpu = smp_processor_id();
+	unsigned core = current_cpu_data.core;
+	unsigned online, left;
+	cpumask_t *coupled_mask = this_cpu_ptr(&online_coupled);
+	u32 *core_ready_count, *nc_core_ready_count;
+	void *nc_addr;
+	cps_nc_entry_fn entry;
+	struct core_boot_config *core_cfg;
+	struct vpe_boot_config *vpe_cfg;
+
+	/* Check that there is an entry function for this state */
+	entry = per_cpu(nc_asm_enter, core)[state];
+	if (!entry)
+		return -EINVAL;
+
+	/* Calculate which coupled CPUs (VPEs) are online */
+#ifdef CONFIG_MIPS_MT
+	if (cpu_online(cpu)) {
+		cpumask_and(coupled_mask, cpu_online_mask,
+			    &cpu_sibling_map[cpu]);
+		online = cpumask_weight(coupled_mask);
+		cpumask_clear_cpu(cpu, coupled_mask);
+	} else
+#endif
+	{
+		cpumask_clear(coupled_mask);
+		online = 1;
+	}
+
+	/* Setup the VPE to run mips_cps_pm_restore when started again */
+	if (config_enabled(CONFIG_CPU_PM) && state == CPS_PM_POWER_GATED) {
+		/* Power gating relies upon CPS SMP */
+		if (!mips_cps_smp_in_use())
+			return -EINVAL;
+
+		core_cfg = &mips_cps_core_bootcfg[core];
+		vpe_cfg = &core_cfg->vpe_config[cpu_vpe_id(&current_cpu_data)];
+		vpe_cfg->pc = (unsigned long)mips_cps_pm_restore;
+		vpe_cfg->gp = (unsigned long)current_thread_info();
+		vpe_cfg->sp = 0;
+	}
+
+	/* Indicate that this CPU might not be coherent */
+	cpumask_clear_cpu(cpu, &cpu_coherent_mask);
+	smp_mb__after_atomic();
+
+	/* Create a non-coherent mapping of the core ready_count */
+	core_ready_count = per_cpu(ready_count, core);
+	nc_addr = kmap_noncoherent(virt_to_page(core_ready_count),
+				   (unsigned long)core_ready_count);
+	nc_addr += ((unsigned long)core_ready_count & ~PAGE_MASK);
+	nc_core_ready_count = nc_addr;
+
+	/* Ensure ready_count is zero-initialised before the assembly runs */
+	ACCESS_ONCE(*nc_core_ready_count) = 0;
+	coupled_barrier(&per_cpu(pm_barrier, core), online);
+
+	/* Run the generated entry code */
+	left = entry(online, nc_core_ready_count);
+
+	/* Remove the non-coherent mapping of ready_count */
+	kunmap_noncoherent();
+
+	/* Indicate that this CPU is definitely coherent */
+	cpumask_set_cpu(cpu, &cpu_coherent_mask);
+
+	/*
+	 * If this VPE is the first to leave the non-coherent wait state then
+	 * it needs to wake up any coupled VPEs still running their wait
+	 * instruction so that they return to cpuidle, which can then complete
+	 * coordination between the coupled VPEs & provide the governor with
+	 * a chance to reflect on the length of time the VPEs were in the
+	 * idle state.
+	 */
+	if (coupled_coherence && (state == CPS_PM_NC_WAIT) && (left == online))
+		arch_send_call_function_ipi_mask(coupled_mask);
+
+	return 0;
+}
+
+static void __init cps_gen_cache_routine(u32 **pp, struct uasm_label **pl,
+					 struct uasm_reloc **pr,
+					 const struct cache_desc *cache,
+					 unsigned op, int lbl)
+{
+	unsigned cache_size = cache->ways << cache->waybit;
+	unsigned i;
+	const unsigned unroll_lines = 32;
+
+	/* If the cache isn't present this function has it easy */
+	if (cache->flags & MIPS_CACHE_NOT_PRESENT)
+		return;
+
+	/* Load base address */
+	UASM_i_LA(pp, t0, (long)CKSEG0);
+
+	/* Calculate end address */
+	if (cache_size < 0x8000)
+		uasm_i_addiu(pp, t1, t0, cache_size);
+	else
+		UASM_i_LA(pp, t1, (long)(CKSEG0 + cache_size));
+
+	/* Start of cache op loop */
+	uasm_build_label(pl, *pp, lbl);
+
+	/* Generate the cache ops */
+	for (i = 0; i < unroll_lines; i++)
+		uasm_i_cache(pp, op, i * cache->linesz, t0);
+
+	/* Update the base address */
+	uasm_i_addiu(pp, t0, t0, unroll_lines * cache->linesz);
+
+	/* Loop if we haven't reached the end address yet */
+	uasm_il_bne(pp, pr, t0, t1, lbl);
+	uasm_i_nop(pp);
+}
+
+static int __init cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl,
+				    struct uasm_reloc **pr,
+				    const struct cpuinfo_mips *cpu_info,
+				    int lbl)
+{
+	unsigned i, fsb_size = 8;
+	unsigned num_loads = (fsb_size * 3) / 2;
+	unsigned line_stride = 2;
+	unsigned line_size = cpu_info->dcache.linesz;
+	unsigned perf_counter, perf_event;
+	unsigned revision = cpu_info->processor_id & PRID_REV_MASK;
+
+	/*
+	 * Determine whether this CPU requires an FSB flush, and if so which
+	 * performance counter/event reflect stalls due to a full FSB.
+	 */
+	switch (__get_cpu_type(cpu_info->cputype)) {
+	case CPU_INTERAPTIV:
+		perf_counter = 1;
+		perf_event = 51;
+		break;
+
+	case CPU_PROAPTIV:
+		/* Newer proAptiv cores don't require this workaround */
+		if (revision >= PRID_REV_ENCODE_332(1, 1, 0))
+			return 0;
+
+		/* On older ones it's unavailable */
+		return -1;
+
+	/* CPUs which do not require the workaround */
+	case CPU_P5600:
+		return 0;
+
+	default:
+		WARN_ONCE(1, "pm-cps: FSB flush unsupported for this CPU\n");
+		return -1;
+	}
+
+	/*
+	 * Ensure that the fill/store buffer (FSB) is not holding the results
+	 * of a prefetch, since if it is then the CPC sequencer may become
+	 * stuck in the D3 (ClrBus) state whilst entering a low power state.
+	 */
+
+	/* Preserve perf counter setup */
+	uasm_i_mfc0(pp, t2, 25, (perf_counter * 2) + 0); /* PerfCtlN */
+	uasm_i_mfc0(pp, t3, 25, (perf_counter * 2) + 1); /* PerfCntN */
+
+	/* Setup perf counter to count FSB full pipeline stalls */
+	uasm_i_addiu(pp, t0, zero, (perf_event << 5) | 0xf);
+	uasm_i_mtc0(pp, t0, 25, (perf_counter * 2) + 0); /* PerfCtlN */
+	uasm_i_ehb(pp);
+	uasm_i_mtc0(pp, zero, 25, (perf_counter * 2) + 1); /* PerfCntN */
+	uasm_i_ehb(pp);
+
+	/* Base address for loads */
+	UASM_i_LA(pp, t0, (long)CKSEG0);
+
+	/* Start of clear loop */
+	uasm_build_label(pl, *pp, lbl);
+
+	/* Perform some loads to fill the FSB */
+	for (i = 0; i < num_loads; i++)
+		uasm_i_lw(pp, zero, i * line_size * line_stride, t0);
+
+	/*
+	 * Invalidate the new D-cache entries so that the cache will need
+	 * refilling (via the FSB) if the loop is executed again.
+	 */
+	for (i = 0; i < num_loads; i++) {
+		uasm_i_cache(pp, Hit_Invalidate_D,
+			     i * line_size * line_stride, t0);
+		uasm_i_cache(pp, Hit_Writeback_Inv_SD,
+			     i * line_size * line_stride, t0);
+	}
+
+	/* Completion barrier */
+	uasm_i_sync(pp, stype_memory);
+	uasm_i_ehb(pp);
+
+	/* Check whether the pipeline stalled due to the FSB being full */
+	uasm_i_mfc0(pp, t1, 25, (perf_counter * 2) + 1); /* PerfCntN */
+
+	/* Loop if it didn't */
+	uasm_il_beqz(pp, pr, t1, lbl);
+	uasm_i_nop(pp);
+
+	/* Restore perf counter 1. The count may well now be wrong... */
+	uasm_i_mtc0(pp, t2, 25, (perf_counter * 2) + 0); /* PerfCtlN */
+	uasm_i_ehb(pp);
+	uasm_i_mtc0(pp, t3, 25, (perf_counter * 2) + 1); /* PerfCntN */
+	uasm_i_ehb(pp);
+
+	return 0;
+}
+
+static void __init cps_gen_set_top_bit(u32 **pp, struct uasm_label **pl,
+				       struct uasm_reloc **pr,
+				       unsigned r_addr, int lbl)
+{
+	uasm_i_lui(pp, t0, uasm_rel_hi(0x80000000));
+	uasm_build_label(pl, *pp, lbl);
+	uasm_i_ll(pp, t1, 0, r_addr);
+	uasm_i_or(pp, t1, t1, t0);
+	uasm_i_sc(pp, t1, 0, r_addr);
+	uasm_il_beqz(pp, pr, t1, lbl);
+	uasm_i_nop(pp);
+}
+
+static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
+{
+	struct uasm_label *l = labels;
+	struct uasm_reloc *r = relocs;
+	u32 *buf, *p;
+	const unsigned r_online = a0;
+	const unsigned r_nc_count = a1;
+	const unsigned r_pcohctl = t7;
+	const unsigned max_instrs = 256;
+	unsigned cpc_cmd;
+	int err;
+	enum {
+		lbl_incready = 1,
+		lbl_poll_cont,
+		lbl_secondary_hang,
+		lbl_disable_coherence,
+		lbl_flush_fsb,
+		lbl_invicache,
+		lbl_flushdcache,
+		lbl_hang,
+		lbl_set_cont,
+		lbl_secondary_cont,
+		lbl_decready,
+	};
+
+	/* Allocate a buffer to hold the generated code */
+	p = buf = kcalloc(max_instrs, sizeof(u32), GFP_KERNEL);
+	if (!buf)
+		return NULL;
+
+	/* Clear labels & relocs ready for (re)use */
+	memset(labels, 0, sizeof(labels));
+	memset(relocs, 0, sizeof(relocs));
+
+	if (config_enabled(CONFIG_CPU_PM) && state == CPS_PM_POWER_GATED) {
+		/* Power gating relies upon CPS SMP */
+		if (!mips_cps_smp_in_use())
+			goto out_err;
+
+		/*
+		 * Save CPU state. Note the non-standard calling convention
+		 * with the return address placed in v0 to avoid clobbering
+		 * the ra register before it is saved.
+		 */
+		UASM_i_LA(&p, t0, (long)mips_cps_pm_save);
+		uasm_i_jalr(&p, v0, t0);
+		uasm_i_nop(&p);
+	}
+
+	/*
+	 * Load addresses of required CM & CPC registers. This is done early
+	 * because they're needed in both the enable & disable coherence steps
+	 * but in the coupled case the enable step will only run on one VPE.
+	 */
+	UASM_i_LA(&p, r_pcohctl, (long)addr_gcr_cl_coherence());
+
+	if (coupled_coherence) {
+		/* Increment ready_count */
+		uasm_i_sync(&p, stype_ordering);
+		uasm_build_label(&l, p, lbl_incready);
+		uasm_i_ll(&p, t1, 0, r_nc_count);
+		uasm_i_addiu(&p, t2, t1, 1);
+		uasm_i_sc(&p, t2, 0, r_nc_count);
+		uasm_il_beqz(&p, &r, t2, lbl_incready);
+		uasm_i_addiu(&p, t1, t1, 1);
+
+		/* Ordering barrier */
+		uasm_i_sync(&p, stype_ordering);
+
+		/*
+		 * If this is the last VPE to become ready for non-coherence
+		 * then it should branch below.
+		 */
+		uasm_il_beq(&p, &r, t1, r_online, lbl_disable_coherence);
+		uasm_i_nop(&p);
+
+		if (state < CPS_PM_POWER_GATED) {
+			/*
+			 * Otherwise this is not the last VPE to become ready
+			 * for non-coherence. It needs to wait until coherence
+			 * has been disabled before proceeding, which it will do
+			 * by polling for the top bit of ready_count being set.
+			 */
+			uasm_i_addiu(&p, t1, zero, -1);
+			uasm_build_label(&l, p, lbl_poll_cont);
+			uasm_i_lw(&p, t0, 0, r_nc_count);
+			uasm_il_bltz(&p, &r, t0, lbl_secondary_cont);
+			uasm_i_ehb(&p);
+			uasm_i_yield(&p, zero, t1);
+			uasm_il_b(&p, &r, lbl_poll_cont);
+			uasm_i_nop(&p);
+		} else {
+			/*
+			 * The core will lose power & this VPE will not continue
+			 * so it can simply halt here.
+			 */
+			uasm_i_addiu(&p, t0, zero, TCHALT_H);
+			uasm_i_mtc0(&p, t0, 2, 4);
+			uasm_build_label(&l, p, lbl_secondary_hang);
+			uasm_il_b(&p, &r, lbl_secondary_hang);
+			uasm_i_nop(&p);
+		}
+	}
+
+	/*
+	 * This is the point of no return - this VPE will now proceed to
+	 * disable coherence. At this point we *must* be sure that no other
+	 * VPE within the core will interfere with the L1 dcache.
+	 */
+	uasm_build_label(&l, p, lbl_disable_coherence);
+
+	/* Invalidate the L1 icache */
+	cps_gen_cache_routine(&p, &l, &r, &cpu_data[cpu].icache,
+			      Index_Invalidate_I, lbl_invicache);
+
+	/* Writeback & invalidate the L1 dcache */
+	cps_gen_cache_routine(&p, &l, &r, &cpu_data[cpu].dcache,
+			      Index_Writeback_Inv_D, lbl_flushdcache);
+
+	/* Completion barrier */
+	uasm_i_sync(&p, stype_memory);
+	uasm_i_ehb(&p);
+
+	/*
+	 * Disable all but self interventions. The load from COHCTL is defined
+	 * by the interAptiv & proAptiv SUMs as ensuring that the operation
+	 * resulting from the preceeding store is complete.
+	 */
+	uasm_i_addiu(&p, t0, zero, 1 << cpu_data[cpu].core);
+	uasm_i_sw(&p, t0, 0, r_pcohctl);
+	uasm_i_lw(&p, t0, 0, r_pcohctl);
+
+	/* Sync to ensure previous interventions are complete */
+	uasm_i_sync(&p, stype_intervention);
+	uasm_i_ehb(&p);
+
+	/* Disable coherence */
+	uasm_i_sw(&p, zero, 0, r_pcohctl);
+	uasm_i_lw(&p, t0, 0, r_pcohctl);
+
+	if (state >= CPS_PM_CLOCK_GATED) {
+		err = cps_gen_flush_fsb(&p, &l, &r, &cpu_data[cpu],
+					lbl_flush_fsb);
+		if (err)
+			goto out_err;
+
+		/* Determine the CPC command to issue */
+		switch (state) {
+		case CPS_PM_CLOCK_GATED:
+			cpc_cmd = CPC_Cx_CMD_CLOCKOFF;
+			break;
+		case CPS_PM_POWER_GATED:
+			cpc_cmd = CPC_Cx_CMD_PWRDOWN;
+			break;
+		default:
+			BUG();
+			goto out_err;
+		}
+
+		/* Issue the CPC command */
+		UASM_i_LA(&p, t0, (long)addr_cpc_cl_cmd());
+		uasm_i_addiu(&p, t1, zero, cpc_cmd);
+		uasm_i_sw(&p, t1, 0, t0);
+
+		if (state == CPS_PM_POWER_GATED) {
+			/* If anything goes wrong just hang */
+			uasm_build_label(&l, p, lbl_hang);
+			uasm_il_b(&p, &r, lbl_hang);
+			uasm_i_nop(&p);
+
+			/*
+			 * There's no point generating more code, the core is
+			 * powered down & if powered back up will run from the
+			 * reset vector not from here.
+			 */
+			goto gen_done;
+		}
+
+		/* Completion barrier */
+		uasm_i_sync(&p, stype_memory);
+		uasm_i_ehb(&p);
+	}
+
+	if (state == CPS_PM_NC_WAIT) {
+		/*
+		 * At this point it is safe for all VPEs to proceed with
+		 * execution. This VPE will set the top bit of ready_count
+		 * to indicate to the other VPEs that they may continue.
+		 */
+		if (coupled_coherence)
+			cps_gen_set_top_bit(&p, &l, &r, r_nc_count,
+					    lbl_set_cont);
+
+		/*
+		 * VPEs which did not disable coherence will continue
+		 * executing, after coherence has been disabled, from this
+		 * point.
+		 */
+		uasm_build_label(&l, p, lbl_secondary_cont);
+
+		/* Now perform our wait */
+		uasm_i_wait(&p, 0);
+	}
+
+	/*
+	 * Re-enable coherence. Note that for CPS_PM_NC_WAIT all coupled VPEs
+	 * will run this. The first will actually re-enable coherence & the
+	 * rest will just be performing a rather unusual nop.
+	 */
+	uasm_i_addiu(&p, t0, zero, CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK);
+	uasm_i_sw(&p, t0, 0, r_pcohctl);
+	uasm_i_lw(&p, t0, 0, r_pcohctl);
+
+	/* Completion barrier */
+	uasm_i_sync(&p, stype_memory);
+	uasm_i_ehb(&p);
+
+	if (coupled_coherence && (state == CPS_PM_NC_WAIT)) {
+		/* Decrement ready_count */
+		uasm_build_label(&l, p, lbl_decready);
+		uasm_i_sync(&p, stype_ordering);
+		uasm_i_ll(&p, t1, 0, r_nc_count);
+		uasm_i_addiu(&p, t2, t1, -1);
+		uasm_i_sc(&p, t2, 0, r_nc_count);
+		uasm_il_beqz(&p, &r, t2, lbl_decready);
+		uasm_i_andi(&p, v0, t1, (1 << fls(smp_num_siblings)) - 1);
+
+		/* Ordering barrier */
+		uasm_i_sync(&p, stype_ordering);
+	}
+
+	if (coupled_coherence && (state == CPS_PM_CLOCK_GATED)) {
+		/*
+		 * At this point it is safe for all VPEs to proceed with
+		 * execution. This VPE will set the top bit of ready_count
+		 * to indicate to the other VPEs that they may continue.
+		 */
+		cps_gen_set_top_bit(&p, &l, &r, r_nc_count, lbl_set_cont);
+
+		/*
+		 * This core will be reliant upon another core sending a
+		 * power-up command to the CPC in order to resume operation.
+		 * Thus an arbitrary VPE can't trigger the core leaving the
+		 * idle state and the one that disables coherence might as well
+		 * be the one to re-enable it. The rest will continue from here
+		 * after that has been done.
+		 */
+		uasm_build_label(&l, p, lbl_secondary_cont);
+
+		/* Ordering barrier */
+		uasm_i_sync(&p, stype_ordering);
+	}
+
+	/* The core is coherent, time to return to C code */
+	uasm_i_jr(&p, ra);
+	uasm_i_nop(&p);
+
+gen_done:
+	/* Ensure the code didn't exceed the resources allocated for it */
+	BUG_ON((p - buf) > max_instrs);
+	BUG_ON((l - labels) > ARRAY_SIZE(labels));
+	BUG_ON((r - relocs) > ARRAY_SIZE(relocs));
+
+	/* Patch branch offsets */
+	uasm_resolve_relocs(relocs, labels);
+
+	/* Flush the icache */
+	local_flush_icache_range((unsigned long)buf, (unsigned long)p);
+
+	return buf;
+out_err:
+	kfree(buf);
+	return NULL;
+}
+
+static int __init cps_gen_core_entries(unsigned cpu)
+{
+	enum cps_pm_state state;
+	unsigned core = cpu_data[cpu].core;
+	unsigned dlinesz = cpu_data[cpu].dcache.linesz;
+	void *entry_fn, *core_rc;
+
+	for (state = CPS_PM_NC_WAIT; state < CPS_PM_STATE_COUNT; state++) {
+		if (per_cpu(nc_asm_enter, core)[state])
+			continue;
+		if (!test_bit(state, state_support))
+			continue;
+
+		entry_fn = cps_gen_entry_code(cpu, state);
+		if (!entry_fn) {
+			pr_err("Failed to generate core %u state %u entry\n",
+			       core, state);
+			clear_bit(state, state_support);
+		}
+
+		per_cpu(nc_asm_enter, core)[state] = entry_fn;
+	}
+
+	if (!per_cpu(ready_count, core)) {
+		core_rc = kmalloc(dlinesz * 2, GFP_KERNEL);
+		if (!core_rc) {
+			pr_err("Failed allocate core %u ready_count\n", core);
+			return -ENOMEM;
+		}
+		per_cpu(ready_count_alloc, core) = core_rc;
+
+		/* Ensure ready_count is aligned to a cacheline boundary */
+		core_rc += dlinesz - 1;
+		core_rc = (void *)((unsigned long)core_rc & ~(dlinesz - 1));
+		per_cpu(ready_count, core) = core_rc;
+	}
+
+	return 0;
+}
+
+static int __init cps_pm_init(void)
+{
+	unsigned cpu;
+	int err;
+
+	/* Detect appropriate sync types for the system */
+	switch (current_cpu_data.cputype) {
+	case CPU_INTERAPTIV:
+	case CPU_PROAPTIV:
+	case CPU_M5150:
+	case CPU_P5600:
+		stype_intervention = 0x2;
+		stype_memory = 0x3;
+		stype_ordering = 0x10;
+		break;
+
+	default:
+		pr_warn("Power management is using heavyweight sync 0\n");
+	}
+
+	/* A CM is required for all non-coherent states */
+	if (!mips_cm_present()) {
+		pr_warn("pm-cps: no CM, non-coherent states unavailable\n");
+		goto out;
+	}
+
+	/*
+	 * If interrupts were enabled whilst running a wait instruction on a
+	 * non-coherent core then the VPE may end up processing interrupts
+	 * whilst non-coherent. That would be bad.
+	 */
+	if (cpu_wait == r4k_wait_irqoff)
+		set_bit(CPS_PM_NC_WAIT, state_support);
+	else
+		pr_warn("pm-cps: non-coherent wait unavailable\n");
+
+	/* Detect whether a CPC is present */
+	if (mips_cpc_present()) {
+		/* Detect whether clock gating is implemented */
+		if (read_cpc_cl_stat_conf() & CPC_Cx_STAT_CONF_CLKGAT_IMPL_MSK)
+			set_bit(CPS_PM_CLOCK_GATED, state_support);
+		else
+			pr_warn("pm-cps: CPC does not support clock gating\n");
+
+		/* Power gating is available with CPS SMP & any CPC */
+		if (mips_cps_smp_in_use())
+			set_bit(CPS_PM_POWER_GATED, state_support);
+		else
+			pr_warn("pm-cps: CPS SMP not in use, power gating unavailable\n");
+	} else {
+		pr_warn("pm-cps: no CPC, clock & power gating unavailable\n");
+	}
+
+	for_each_present_cpu(cpu) {
+		err = cps_gen_core_entries(cpu);
+		if (err)
+			return err;
+	}
+out:
+	return 0;
+}
+arch_initcall(cps_pm_init);
diff --git a/arch/mips/kernel/pm.c b/arch/mips/kernel/pm.c
new file mode 100644
index 000000000..fefdf39d3
--- /dev/null
+++ b/arch/mips/kernel/pm.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * CPU PM notifiers for saving/restoring general CPU state.
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/init.h>
+
+#include <asm/dsp.h>
+#include <asm/fpu.h>
+#include <asm/mmu_context.h>
+#include <asm/pm.h>
+#include <asm/watch.h>
+
+/* Used by PM helper macros in asm/pm.h */
+struct mips_static_suspend_state mips_static_suspend_state;
+
+/**
+ * mips_cpu_save() - Save general CPU state.
+ * Ensures that general CPU context is saved, notably FPU and DSP.
+ */
+static int mips_cpu_save(void)
+{
+	/* Save FPU state */
+	lose_fpu(1);
+
+	/* Save DSP state */
+	save_dsp(current);
+
+	return 0;
+}
+
+/**
+ * mips_cpu_restore() - Restore general CPU state.
+ * Restores important CPU context.
+ */
+static void mips_cpu_restore(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	/* Restore ASID */
+	if (current->mm)
+		write_c0_entryhi(cpu_asid(cpu, current->mm));
+
+	/* Restore DSP state */
+	restore_dsp(current);
+
+	/* Restore UserLocal */
+	if (cpu_has_userlocal)
+		write_c0_userlocal(current_thread_info()->tp_value);
+
+	/* Restore watch registers */
+	__restore_watch();
+}
+
+/**
+ * mips_pm_notifier() - Notifier for preserving general CPU context.
+ * @self:	Notifier block.
+ * @cmd:	CPU PM event.
+ * @v:		Private data (unused).
+ *
+ * This is called when a CPU power management event occurs, and is used to
+ * ensure that important CPU context is preserved across a CPU power down.
+ */
+static int mips_pm_notifier(struct notifier_block *self, unsigned long cmd,
+			    void *v)
+{
+	int ret;
+
+	switch (cmd) {
+	case CPU_PM_ENTER:
+		ret = mips_cpu_save();
+		if (ret)
+			return NOTIFY_STOP;
+		break;
+	case CPU_PM_ENTER_FAILED:
+	case CPU_PM_EXIT:
+		mips_cpu_restore();
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mips_pm_notifier_block = {
+	.notifier_call = mips_pm_notifier,
+};
+
+static int __init mips_pm_init(void)
+{
+	return cpu_pm_register_notifier(&mips_pm_notifier_block);
+}
+arch_initcall(mips_pm_init);
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
new file mode 100644
index 000000000..298b2b773
--- /dev/null
+++ b/arch/mips/kernel/proc.c
@@ -0,0 +1,175 @@
+/*
+ *  Copyright (C) 1995, 1996, 2001  Ralf Baechle
+ *  Copyright (C) 2001, 2004  MIPS Technologies, Inc.
+ *  Copyright (C) 2004	Maciej W. Rozycki
+ */
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/idle.h>
+#include <asm/mipsregs.h>
+#include <asm/processor.h>
+#include <asm/prom.h>
+
+unsigned int vced_count, vcei_count;
+
+/*
+ *  * No lock; only written during early bootup by CPU 0.
+ *   */
+static RAW_NOTIFIER_HEAD(proc_cpuinfo_chain);
+
+int __ref register_proc_cpuinfo_notifier(struct notifier_block *nb)
+{
+	return raw_notifier_chain_register(&proc_cpuinfo_chain, nb);
+}
+
+int proc_cpuinfo_notifier_call_chain(unsigned long val, void *v)
+{
+	return raw_notifier_call_chain(&proc_cpuinfo_chain, val, v);
+}
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	struct proc_cpuinfo_notifier_args proc_cpuinfo_notifier_args;
+	unsigned long n = (unsigned long) v - 1;
+	unsigned int version = cpu_data[n].processor_id;
+	unsigned int fp_vers = cpu_data[n].fpu_id;
+	char fmt [64];
+	int i;
+
+#ifdef CONFIG_SMP
+	if (!cpu_online(n))
+		return 0;
+#endif
+
+	/*
+	 * For the first processor also print the system type
+	 */
+	if (n == 0) {
+		seq_printf(m, "system type\t\t: %s\n", get_system_type());
+		if (mips_get_machine_name())
+			seq_printf(m, "machine\t\t\t: %s\n",
+				   mips_get_machine_name());
+	}
+
+	seq_printf(m, "processor\t\t: %ld\n", n);
+	sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
+		      cpu_data[n].options & MIPS_CPU_FPU ? "  FPU V%d.%d" : "");
+	seq_printf(m, fmt, __cpu_name[n],
+		      (version >> 4) & 0x0f, version & 0x0f,
+		      (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
+	seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",
+		      cpu_data[n].udelay_val / (500000/HZ),
+		      (cpu_data[n].udelay_val / (5000/HZ)) % 100);
+	seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");
+	seq_printf(m, "microsecond timers\t: %s\n",
+		      cpu_has_counter ? "yes" : "no");
+	seq_printf(m, "tlb_entries\t\t: %d\n", cpu_data[n].tlbsize);
+	seq_printf(m, "extra interrupt vector\t: %s\n",
+		      cpu_has_divec ? "yes" : "no");
+	seq_printf(m, "hardware watchpoint\t: %s",
+		      cpu_has_watch ? "yes, " : "no\n");
+	if (cpu_has_watch) {
+		seq_printf(m, "count: %d, address/irw mask: [",
+		      cpu_data[n].watch_reg_count);
+		for (i = 0; i < cpu_data[n].watch_reg_count; i++)
+			seq_printf(m, "%s0x%04x", i ? ", " : "" ,
+				cpu_data[n].watch_reg_masks[i]);
+		seq_printf(m, "]\n");
+	}
+
+	seq_printf(m, "isa\t\t\t:"); 
+	if (cpu_has_mips_r1)
+		seq_printf(m, " mips1");
+	if (cpu_has_mips_2)
+		seq_printf(m, "%s", " mips2");
+	if (cpu_has_mips_3)
+		seq_printf(m, "%s", " mips3");
+	if (cpu_has_mips_4)
+		seq_printf(m, "%s", " mips4");
+	if (cpu_has_mips_5)
+		seq_printf(m, "%s", " mips5");
+	if (cpu_has_mips32r1)
+		seq_printf(m, "%s", " mips32r1");
+	if (cpu_has_mips32r2)
+		seq_printf(m, "%s", " mips32r2");
+	if (cpu_has_mips32r6)
+		seq_printf(m, "%s", " mips32r6");
+	if (cpu_has_mips64r1)
+		seq_printf(m, "%s", " mips64r1");
+	if (cpu_has_mips64r2)
+		seq_printf(m, "%s", " mips64r2");
+	if (cpu_has_mips64r6)
+		seq_printf(m, "%s", " mips64r6");
+	seq_printf(m, "\n");
+
+	seq_printf(m, "ASEs implemented\t:");
+	if (cpu_has_mips16)	seq_printf(m, "%s", " mips16");
+	if (cpu_has_mdmx)	seq_printf(m, "%s", " mdmx");
+	if (cpu_has_mips3d)	seq_printf(m, "%s", " mips3d");
+	if (cpu_has_smartmips)	seq_printf(m, "%s", " smartmips");
+	if (cpu_has_dsp)	seq_printf(m, "%s", " dsp");
+	if (cpu_has_dsp2)	seq_printf(m, "%s", " dsp2");
+	if (cpu_has_mipsmt)	seq_printf(m, "%s", " mt");
+	if (cpu_has_mmips)	seq_printf(m, "%s", " micromips");
+	if (cpu_has_vz)		seq_printf(m, "%s", " vz");
+	if (cpu_has_msa)	seq_printf(m, "%s", " msa");
+	if (cpu_has_eva)	seq_printf(m, "%s", " eva");
+	if (cpu_has_htw)	seq_printf(m, "%s", " htw");
+	if (cpu_has_xpa)	seq_printf(m, "%s", " xpa");
+	seq_printf(m, "\n");
+
+	if (cpu_has_mmips) {
+		seq_printf(m, "micromips kernel\t: %s\n",
+		      (read_c0_config3() & MIPS_CONF3_ISA_OE) ?  "yes" : "no");
+	}
+	seq_printf(m, "shadow register sets\t: %d\n",
+		      cpu_data[n].srsets);
+	seq_printf(m, "kscratch registers\t: %d\n",
+		      hweight8(cpu_data[n].kscratch_mask));
+	seq_printf(m, "package\t\t\t: %d\n", cpu_data[n].package);
+	seq_printf(m, "core\t\t\t: %d\n", cpu_data[n].core);
+
+	sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
+		      cpu_has_vce ? "%u" : "not available");
+	seq_printf(m, fmt, 'D', vced_count);
+	seq_printf(m, fmt, 'I', vcei_count);
+
+	proc_cpuinfo_notifier_args.m = m;
+	proc_cpuinfo_notifier_args.n = n;
+
+	raw_notifier_call_chain(&proc_cpuinfo_chain, 0,
+				&proc_cpuinfo_notifier_args);
+
+	seq_printf(m, "\n");
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	unsigned long i = *pos;
+
+	return i < NR_CPUS ? (void *) (i + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
new file mode 100644
index 000000000..f2975d4d1
--- /dev/null
+++ b/arch/mips/kernel/process.c
@@ -0,0 +1,666 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000 by Ralf Baechle and others.
+ * Copyright (C) 2005, 2006 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2004 Thiemo Seufer
+ * Copyright (C) 2013  Imagination Technologies Ltd.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/tick.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/export.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/personality.h>
+#include <linux/sys.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/kallsyms.h>
+#include <linux/random.h>
+#include <linux/prctl.h>
+
+#include <asm/asm.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/dsp.h>
+#include <asm/fpu.h>
+#include <asm/msa.h>
+#include <asm/pgtable.h>
+#include <asm/mipsregs.h>
+#include <asm/processor.h>
+#include <asm/reg.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/elf.h>
+#include <asm/isadep.h>
+#include <asm/inst.h>
+#include <asm/stacktrace.h>
+#include <asm/irq_regs.h>
+
+#ifdef CONFIG_HOTPLUG_CPU
+void arch_cpu_idle_dead(void)
+{
+	/* What the heck is this check doing ? */
+	if (!cpumask_test_cpu(smp_processor_id(), &cpu_callin_map))
+		play_dead();
+}
+#endif
+
+asmlinkage void ret_from_fork(void);
+asmlinkage void ret_from_kernel_thread(void);
+
+void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
+{
+	unsigned long status;
+
+	/* New thread loses kernel privileges. */
+	status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_FR|KU_MASK);
+	status |= KU_USER;
+	regs->cp0_status = status;
+	clear_used_math();
+	clear_fpu_owner();
+	init_dsp();
+	clear_thread_flag(TIF_USEDMSA);
+	clear_thread_flag(TIF_MSA_CTX_LIVE);
+	disable_msa();
+	regs->cp0_epc = pc;
+	regs->regs[29] = sp;
+}
+
+void exit_thread(void)
+{
+}
+
+void flush_thread(void)
+{
+}
+
+int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
+{
+	/*
+	 * Save any process state which is live in hardware registers to the
+	 * parent context prior to duplication. This prevents the new child
+	 * state becoming stale if the parent is preempted before copy_thread()
+	 * gets a chance to save the parent's live hardware registers to the
+	 * child context.
+	 */
+	preempt_disable();
+
+	if (is_msa_enabled())
+		save_msa(current);
+	else if (is_fpu_owner())
+		_save_fp(current);
+
+	save_dsp(current);
+
+	preempt_enable();
+
+	*dst = *src;
+	return 0;
+}
+
+/*
+ * Copy architecture-specific thread state
+ */
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+	unsigned long kthread_arg, struct task_struct *p)
+{
+	struct thread_info *ti = task_thread_info(p);
+	struct pt_regs *childregs, *regs = current_pt_regs();
+	unsigned long childksp;
+	p->set_child_tid = p->clear_child_tid = NULL;
+
+	childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE - 32;
+
+	/* set up new TSS. */
+	childregs = (struct pt_regs *) childksp - 1;
+	/*  Put the stack after the struct pt_regs.  */
+	childksp = (unsigned long) childregs;
+	p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1);
+	if (unlikely(p->flags & PF_KTHREAD)) {
+		/* kernel thread */
+		unsigned long status = p->thread.cp0_status;
+		memset(childregs, 0, sizeof(struct pt_regs));
+		ti->addr_limit = KERNEL_DS;
+		p->thread.reg16 = usp; /* fn */
+		p->thread.reg17 = kthread_arg;
+		p->thread.reg29 = childksp;
+		p->thread.reg31 = (unsigned long) ret_from_kernel_thread;
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+		status = (status & ~(ST0_KUP | ST0_IEP | ST0_IEC)) |
+			 ((status & (ST0_KUC | ST0_IEC)) << 2);
+#else
+		status |= ST0_EXL;
+#endif
+		childregs->cp0_status = status;
+		return 0;
+	}
+
+	/* user thread */
+	*childregs = *regs;
+	childregs->regs[7] = 0; /* Clear error flag */
+	childregs->regs[2] = 0; /* Child gets zero as return value */
+	if (usp)
+		childregs->regs[29] = usp;
+	ti->addr_limit = USER_DS;
+
+	p->thread.reg29 = (unsigned long) childregs;
+	p->thread.reg31 = (unsigned long) ret_from_fork;
+
+	/*
+	 * New tasks lose permission to use the fpu. This accelerates context
+	 * switching for most programs since they don't use the fpu.
+	 */
+	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
+
+	clear_tsk_thread_flag(p, TIF_USEDFPU);
+	clear_tsk_thread_flag(p, TIF_USEDMSA);
+	clear_tsk_thread_flag(p, TIF_MSA_CTX_LIVE);
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	clear_tsk_thread_flag(p, TIF_FPUBOUND);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+	if (clone_flags & CLONE_SETTLS)
+		ti->tp_value = regs->regs[7];
+
+	return 0;
+}
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+#include <linux/stackprotector.h>
+unsigned long __stack_chk_guard __read_mostly;
+EXPORT_SYMBOL(__stack_chk_guard);
+#endif
+
+struct mips_frame_info {
+	void		*func;
+	unsigned long	func_size;
+	int		frame_size;
+	int		pc_offset;
+};
+
+#define J_TARGET(pc,target)	\
+		(((unsigned long)(pc) & 0xf0000000) | ((target) << 2))
+
+static inline int is_ra_save_ins(union mips_instruction *ip)
+{
+#ifdef CONFIG_CPU_MICROMIPS
+	union mips_instruction mmi;
+
+	/*
+	 * swsp ra,offset
+	 * swm16 reglist,offset(sp)
+	 * swm32 reglist,offset(sp)
+	 * sw32 ra,offset(sp)
+	 * jradiussp - NOT SUPPORTED
+	 *
+	 * microMIPS is way more fun...
+	 */
+	if (mm_insn_16bit(ip->halfword[0])) {
+		mmi.word = (ip->halfword[0] << 16);
+		return (mmi.mm16_r5_format.opcode == mm_swsp16_op &&
+			mmi.mm16_r5_format.rt == 31) ||
+		       (mmi.mm16_m_format.opcode == mm_pool16c_op &&
+			mmi.mm16_m_format.func == mm_swm16_op);
+	}
+	else {
+		mmi.halfword[0] = ip->halfword[1];
+		mmi.halfword[1] = ip->halfword[0];
+		return (mmi.mm_m_format.opcode == mm_pool32b_op &&
+			mmi.mm_m_format.rd > 9 &&
+			mmi.mm_m_format.base == 29 &&
+			mmi.mm_m_format.func == mm_swm32_func) ||
+		       (mmi.i_format.opcode == mm_sw32_op &&
+			mmi.i_format.rs == 29 &&
+			mmi.i_format.rt == 31);
+	}
+#else
+	/* sw / sd $ra, offset($sp) */
+	return (ip->i_format.opcode == sw_op || ip->i_format.opcode == sd_op) &&
+		ip->i_format.rs == 29 &&
+		ip->i_format.rt == 31;
+#endif
+}
+
+static inline int is_jump_ins(union mips_instruction *ip)
+{
+#ifdef CONFIG_CPU_MICROMIPS
+	/*
+	 * jr16,jrc,jalr16,jalr16
+	 * jal
+	 * jalr/jr,jalr.hb/jr.hb,jalrs,jalrs.hb
+	 * jraddiusp - NOT SUPPORTED
+	 *
+	 * microMIPS is kind of more fun...
+	 */
+	union mips_instruction mmi;
+
+	mmi.word = (ip->halfword[0] << 16);
+
+	if ((mmi.mm16_r5_format.opcode == mm_pool16c_op &&
+	    (mmi.mm16_r5_format.rt & mm_jr16_op) == mm_jr16_op) ||
+	    ip->j_format.opcode == mm_jal32_op)
+		return 1;
+	if (ip->r_format.opcode != mm_pool32a_op ||
+			ip->r_format.func != mm_pool32axf_op)
+		return 0;
+	return ((ip->u_format.uimmediate >> 6) & mm_jalr_op) == mm_jalr_op;
+#else
+	if (ip->j_format.opcode == j_op)
+		return 1;
+	if (ip->j_format.opcode == jal_op)
+		return 1;
+	if (ip->r_format.opcode != spec_op)
+		return 0;
+	return ip->r_format.func == jalr_op || ip->r_format.func == jr_op;
+#endif
+}
+
+static inline int is_sp_move_ins(union mips_instruction *ip)
+{
+#ifdef CONFIG_CPU_MICROMIPS
+	/*
+	 * addiusp -imm
+	 * addius5 sp,-imm
+	 * addiu32 sp,sp,-imm
+	 * jradiussp - NOT SUPPORTED
+	 *
+	 * microMIPS is not more fun...
+	 */
+	if (mm_insn_16bit(ip->halfword[0])) {
+		union mips_instruction mmi;
+
+		mmi.word = (ip->halfword[0] << 16);
+		return (mmi.mm16_r3_format.opcode == mm_pool16d_op &&
+			mmi.mm16_r3_format.simmediate && mm_addiusp_func) ||
+		       (mmi.mm16_r5_format.opcode == mm_pool16d_op &&
+			mmi.mm16_r5_format.rt == 29);
+	}
+	return ip->mm_i_format.opcode == mm_addiu32_op &&
+	       ip->mm_i_format.rt == 29 && ip->mm_i_format.rs == 29;
+#else
+	/* addiu/daddiu sp,sp,-imm */
+	if (ip->i_format.rs != 29 || ip->i_format.rt != 29)
+		return 0;
+	if (ip->i_format.opcode == addiu_op || ip->i_format.opcode == daddiu_op)
+		return 1;
+#endif
+	return 0;
+}
+
+static int get_frame_info(struct mips_frame_info *info)
+{
+#ifdef CONFIG_CPU_MICROMIPS
+	union mips_instruction *ip = (void *) (((char *) info->func) - 1);
+#else
+	union mips_instruction *ip = info->func;
+#endif
+	unsigned max_insns = info->func_size / sizeof(union mips_instruction);
+	unsigned i;
+
+	info->pc_offset = -1;
+	info->frame_size = 0;
+
+	if (!ip)
+		goto err;
+
+	if (max_insns == 0)
+		max_insns = 128U;	/* unknown function size */
+	max_insns = min(128U, max_insns);
+
+	for (i = 0; i < max_insns; i++, ip++) {
+
+		if (is_jump_ins(ip))
+			break;
+		if (!info->frame_size) {
+			if (is_sp_move_ins(ip))
+			{
+#ifdef CONFIG_CPU_MICROMIPS
+				if (mm_insn_16bit(ip->halfword[0]))
+				{
+					unsigned short tmp;
+
+					if (ip->halfword[0] & mm_addiusp_func)
+					{
+						tmp = (((ip->halfword[0] >> 1) & 0x1ff) << 2);
+						info->frame_size = -(signed short)(tmp | ((tmp & 0x100) ? 0xfe00 : 0));
+					} else {
+						tmp = (ip->halfword[0] >> 1);
+						info->frame_size = -(signed short)(tmp & 0xf);
+					}
+					ip = (void *) &ip->halfword[1];
+					ip--;
+				} else
+#endif
+				info->frame_size = - ip->i_format.simmediate;
+			}
+			continue;
+		}
+		if (info->pc_offset == -1 && is_ra_save_ins(ip)) {
+			info->pc_offset =
+				ip->i_format.simmediate / sizeof(long);
+			break;
+		}
+	}
+	if (info->frame_size && info->pc_offset >= 0) /* nested */
+		return 0;
+	if (info->pc_offset < 0) /* leaf */
+		return 1;
+	/* prologue seems boggus... */
+err:
+	return -1;
+}
+
+static struct mips_frame_info schedule_mfi __read_mostly;
+
+#ifdef CONFIG_KALLSYMS
+static unsigned long get___schedule_addr(void)
+{
+	return kallsyms_lookup_name("__schedule");
+}
+#else
+static unsigned long get___schedule_addr(void)
+{
+	union mips_instruction *ip = (void *)schedule;
+	int max_insns = 8;
+	int i;
+
+	for (i = 0; i < max_insns; i++, ip++) {
+		if (ip->j_format.opcode == j_op)
+			return J_TARGET(ip, ip->j_format.target);
+	}
+	return 0;
+}
+#endif
+
+static int __init frame_info_init(void)
+{
+	unsigned long size = 0;
+#ifdef CONFIG_KALLSYMS
+	unsigned long ofs;
+#endif
+	unsigned long addr;
+
+	addr = get___schedule_addr();
+	if (!addr)
+		addr = (unsigned long)schedule;
+
+#ifdef CONFIG_KALLSYMS
+	kallsyms_lookup_size_offset(addr, &size, &ofs);
+#endif
+	schedule_mfi.func = (void *)addr;
+	schedule_mfi.func_size = size;
+
+	get_frame_info(&schedule_mfi);
+
+	/*
+	 * Without schedule() frame info, result given by
+	 * thread_saved_pc() and get_wchan() are not reliable.
+	 */
+	if (schedule_mfi.pc_offset < 0)
+		printk("Can't analyze schedule() prologue at %p\n", schedule);
+
+	return 0;
+}
+
+arch_initcall(frame_info_init);
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+	struct thread_struct *t = &tsk->thread;
+
+	/* New born processes are a special case */
+	if (t->reg31 == (unsigned long) ret_from_fork)
+		return t->reg31;
+	if (schedule_mfi.pc_offset < 0)
+		return 0;
+	return ((unsigned long *)t->reg29)[schedule_mfi.pc_offset];
+}
+
+
+#ifdef CONFIG_KALLSYMS
+/* generic stack unwinding function */
+unsigned long notrace unwind_stack_by_address(unsigned long stack_page,
+					      unsigned long *sp,
+					      unsigned long pc,
+					      unsigned long *ra)
+{
+	struct mips_frame_info info;
+	unsigned long size, ofs;
+	int leaf;
+	extern void ret_from_irq(void);
+	extern void ret_from_exception(void);
+
+	if (!stack_page)
+		return 0;
+
+	/*
+	 * If we reached the bottom of interrupt context,
+	 * return saved pc in pt_regs.
+	 */
+	if (pc == (unsigned long)ret_from_irq ||
+	    pc == (unsigned long)ret_from_exception) {
+		struct pt_regs *regs;
+		if (*sp >= stack_page &&
+		    *sp + sizeof(*regs) <= stack_page + THREAD_SIZE - 32) {
+			regs = (struct pt_regs *)*sp;
+			pc = regs->cp0_epc;
+			if (__kernel_text_address(pc)) {
+				*sp = regs->regs[29];
+				*ra = regs->regs[31];
+				return pc;
+			}
+		}
+		return 0;
+	}
+	if (!kallsyms_lookup_size_offset(pc, &size, &ofs))
+		return 0;
+	/*
+	 * Return ra if an exception occurred at the first instruction
+	 */
+	if (unlikely(ofs == 0)) {
+		pc = *ra;
+		*ra = 0;
+		return pc;
+	}
+
+	info.func = (void *)(pc - ofs);
+	info.func_size = ofs;	/* analyze from start to ofs */
+	leaf = get_frame_info(&info);
+	if (leaf < 0)
+		return 0;
+
+	if (*sp < stack_page ||
+	    *sp + info.frame_size > stack_page + THREAD_SIZE - 32)
+		return 0;
+
+	if (leaf)
+		/*
+		 * For some extreme cases, get_frame_info() can
+		 * consider wrongly a nested function as a leaf
+		 * one. In that cases avoid to return always the
+		 * same value.
+		 */
+		pc = pc != *ra ? *ra : 0;
+	else
+		pc = ((unsigned long *)(*sp))[info.pc_offset];
+
+	*sp += info.frame_size;
+	*ra = 0;
+	return __kernel_text_address(pc) ? pc : 0;
+}
+EXPORT_SYMBOL(unwind_stack_by_address);
+
+/* used by show_backtrace() */
+unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
+			   unsigned long pc, unsigned long *ra)
+{
+	unsigned long stack_page = (unsigned long)task_stack_page(task);
+	return unwind_stack_by_address(stack_page, sp, pc, ra);
+}
+#endif
+
+/*
+ * get_wchan - a maintenance nightmare^W^Wpain in the ass ...
+ */
+unsigned long get_wchan(struct task_struct *task)
+{
+	unsigned long pc = 0;
+#ifdef CONFIG_KALLSYMS
+	unsigned long sp;
+	unsigned long ra = 0;
+#endif
+
+	if (!task || task == current || task->state == TASK_RUNNING)
+		goto out;
+	if (!task_stack_page(task))
+		goto out;
+
+	pc = thread_saved_pc(task);
+
+#ifdef CONFIG_KALLSYMS
+	sp = task->thread.reg29 + schedule_mfi.frame_size;
+
+	while (in_sched_functions(pc))
+		pc = unwind_stack(task, &sp, pc, &ra);
+#endif
+
+out:
+	return pc;
+}
+
+/*
+ * Don't forget that the stack pointer must be aligned on a 8 bytes
+ * boundary for 32-bits ABI and 16 bytes for 64-bits ABI.
+ */
+unsigned long arch_align_stack(unsigned long sp)
+{
+	if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
+		sp -= get_random_int() & ~PAGE_MASK;
+
+	return sp & ALMASK;
+}
+
+static void arch_dump_stack(void *info)
+{
+	struct pt_regs *regs;
+
+	regs = get_irq_regs();
+
+	if (regs)
+		show_regs(regs);
+
+	dump_stack();
+}
+
+void arch_trigger_all_cpu_backtrace(bool include_self)
+{
+	smp_call_function(arch_dump_stack, NULL, 1);
+}
+
+int mips_get_process_fp_mode(struct task_struct *task)
+{
+	int value = 0;
+
+	if (!test_tsk_thread_flag(task, TIF_32BIT_FPREGS))
+		value |= PR_FP_MODE_FR;
+	if (test_tsk_thread_flag(task, TIF_HYBRID_FPREGS))
+		value |= PR_FP_MODE_FRE;
+
+	return value;
+}
+
+int mips_set_process_fp_mode(struct task_struct *task, unsigned int value)
+{
+	const unsigned int known_bits = PR_FP_MODE_FR | PR_FP_MODE_FRE;
+	unsigned long switch_count;
+	struct task_struct *t;
+
+	/* Check the value is valid */
+	if (value & ~known_bits)
+		return -EOPNOTSUPP;
+
+	/* Avoid inadvertently triggering emulation */
+	if ((value & PR_FP_MODE_FR) && cpu_has_fpu &&
+	    !(current_cpu_data.fpu_id & MIPS_FPIR_F64))
+		return -EOPNOTSUPP;
+	if ((value & PR_FP_MODE_FRE) && cpu_has_fpu && !cpu_has_fre)
+		return -EOPNOTSUPP;
+
+	/* FR = 0 not supported in MIPS R6 */
+	if (!(value & PR_FP_MODE_FR) && cpu_has_fpu && cpu_has_mips_r6)
+		return -EOPNOTSUPP;
+
+	/* Save FP & vector context, then disable FPU & MSA */
+	if (task->signal == current->signal)
+		lose_fpu(1);
+
+	/* Prevent any threads from obtaining live FP context */
+	atomic_set(&task->mm->context.fp_mode_switching, 1);
+	smp_mb__after_atomic();
+
+	/*
+	 * If there are multiple online CPUs then wait until all threads whose
+	 * FP mode is about to change have been context switched. This approach
+	 * allows us to only worry about whether an FP mode switch is in
+	 * progress when FP is first used in a tasks time slice. Pretty much all
+	 * of the mode switch overhead can thus be confined to cases where mode
+	 * switches are actually occuring. That is, to here. However for the
+	 * thread performing the mode switch it may take a while...
+	 */
+	if (num_online_cpus() > 1) {
+		spin_lock_irq(&task->sighand->siglock);
+
+		for_each_thread(task, t) {
+			if (t == current)
+				continue;
+
+			switch_count = t->nvcsw + t->nivcsw;
+
+			do {
+				spin_unlock_irq(&task->sighand->siglock);
+				cond_resched();
+				spin_lock_irq(&task->sighand->siglock);
+			} while ((t->nvcsw + t->nivcsw) == switch_count);
+		}
+
+		spin_unlock_irq(&task->sighand->siglock);
+	}
+
+	/*
+	 * There are now no threads of the process with live FP context, so it
+	 * is safe to proceed with the FP mode switch.
+	 */
+	for_each_thread(task, t) {
+		/* Update desired FP register width */
+		if (value & PR_FP_MODE_FR) {
+			clear_tsk_thread_flag(t, TIF_32BIT_FPREGS);
+		} else {
+			set_tsk_thread_flag(t, TIF_32BIT_FPREGS);
+			clear_tsk_thread_flag(t, TIF_MSA_CTX_LIVE);
+		}
+
+		/* Update desired FP single layout */
+		if (value & PR_FP_MODE_FRE)
+			set_tsk_thread_flag(t, TIF_HYBRID_FPREGS);
+		else
+			clear_tsk_thread_flag(t, TIF_HYBRID_FPREGS);
+	}
+
+	/* Allow threads to use FP again */
+	atomic_set(&task->mm->context.fp_mode_switching, 0);
+
+	return 0;
+}
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
new file mode 100644
index 000000000..e303cb1ef
--- /dev/null
+++ b/arch/mips/kernel/prom.c
@@ -0,0 +1,78 @@
+/*
+ * MIPS support for CONFIG_OF device tree support
+ *
+ * Copyright (C) 2010 Cisco Systems Inc. <dediao@cisco.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/bootmem.h>
+#include <linux/debugfs.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/page.h>
+#include <asm/prom.h>
+
+static char mips_machine_name[64] = "Unknown";
+
+__init void mips_set_machine_name(const char *name)
+{
+	if (name == NULL)
+		return;
+
+	strlcpy(mips_machine_name, name, sizeof(mips_machine_name));
+	pr_info("MIPS: machine is %s\n", mips_get_machine_name());
+}
+
+char *mips_get_machine_name(void)
+{
+	return mips_machine_name;
+}
+
+#ifdef CONFIG_OF
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+	return add_memory_region(base, size, BOOT_MEM_RAM);
+}
+
+void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+	return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
+}
+
+void __init __dt_setup_arch(void *bph)
+{
+	if (!early_init_dt_scan(bph))
+		return;
+
+	mips_set_machine_name(of_flat_dt_get_machine_name());
+}
+
+int __init __dt_register_buses(const char *bus0, const char *bus1)
+{
+	static struct of_device_id of_ids[3];
+
+	if (!of_have_populated_dt())
+		panic("device tree not present");
+
+	strlcpy(of_ids[0].compatible, bus0, sizeof(of_ids[0].compatible));
+	if (bus1) {
+		strlcpy(of_ids[1].compatible, bus1,
+			sizeof(of_ids[1].compatible));
+	}
+
+	if (of_platform_populate(NULL, of_ids, NULL, NULL))
+		panic("failed to populate DT");
+
+	return 0;
+}
+
+#endif
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
new file mode 100644
index 000000000..e933a309f
--- /dev/null
+++ b/arch/mips/kernel/ptrace.c
@@ -0,0 +1,836 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 Ross Biro
+ * Copyright (C) Linus Torvalds
+ * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
+ * Copyright (C) 1996 David S. Miller
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999 MIPS Technologies, Inc.
+ * Copyright (C) 2000 Ulf Carlsson
+ *
+ * At this time Linux/MIPS64 only supports syscall tracing, even for 32-bit
+ * binaries.
+ */
+#include <linux/compiler.h>
+#include <linux/context_tracking.h>
+#include <linux/elf.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/smp.h>
+#include <linux/security.h>
+#include <linux/tracehook.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/ftrace.h>
+
+#include <asm/byteorder.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <asm/dsp.h>
+#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/syscall.h>
+#include <asm/uaccess.h>
+#include <asm/bootinfo.h>
+#include <asm/reg.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+static void init_fp_ctx(struct task_struct *target)
+{
+	/* If FP has been used then the target already has context */
+	if (tsk_used_math(target))
+		return;
+
+	/* Begin with data registers set to all 1s... */
+	memset(&target->thread.fpu.fpr, ~0, sizeof(target->thread.fpu.fpr));
+
+	/* ...and FCSR zeroed */
+	target->thread.fpu.fcr31 = 0;
+
+	/*
+	 * Record that the target has "used" math, such that the context
+	 * just initialised, and any modifications made by the caller,
+	 * aren't discarded.
+	 */
+	set_stopped_child_used_math(target);
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure single step bits etc are not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+	/* Don't load the watchpoint registers for the ex-child. */
+	clear_tsk_thread_flag(child, TIF_LOAD_WATCH);
+}
+
+/*
+ * Read a general register set.	 We always use the 64-bit format, even
+ * for 32-bit kernels and for 32-bit processes on a 64-bit kernel.
+ * Registers are sign extended to fill the available space.
+ */
+int ptrace_getregs(struct task_struct *child, struct user_pt_regs __user *data)
+{
+	struct pt_regs *regs;
+	int i;
+
+	if (!access_ok(VERIFY_WRITE, data, 38 * 8))
+		return -EIO;
+
+	regs = task_pt_regs(child);
+
+	for (i = 0; i < 32; i++)
+		__put_user((long)regs->regs[i], (__s64 __user *)&data->regs[i]);
+	__put_user((long)regs->lo, (__s64 __user *)&data->lo);
+	__put_user((long)regs->hi, (__s64 __user *)&data->hi);
+	__put_user((long)regs->cp0_epc, (__s64 __user *)&data->cp0_epc);
+	__put_user((long)regs->cp0_badvaddr, (__s64 __user *)&data->cp0_badvaddr);
+	__put_user((long)regs->cp0_status, (__s64 __user *)&data->cp0_status);
+	__put_user((long)regs->cp0_cause, (__s64 __user *)&data->cp0_cause);
+
+	return 0;
+}
+
+/*
+ * Write a general register set.  As for PTRACE_GETREGS, we always use
+ * the 64-bit format.  On a 32-bit kernel only the lower order half
+ * (according to endianness) will be used.
+ */
+int ptrace_setregs(struct task_struct *child, struct user_pt_regs __user *data)
+{
+	struct pt_regs *regs;
+	int i;
+
+	if (!access_ok(VERIFY_READ, data, 38 * 8))
+		return -EIO;
+
+	regs = task_pt_regs(child);
+
+	for (i = 0; i < 32; i++)
+		__get_user(regs->regs[i], (__s64 __user *)&data->regs[i]);
+	__get_user(regs->lo, (__s64 __user *)&data->lo);
+	__get_user(regs->hi, (__s64 __user *)&data->hi);
+	__get_user(regs->cp0_epc, (__s64 __user *)&data->cp0_epc);
+
+	/* badvaddr, status, and cause may not be written.  */
+
+	return 0;
+}
+
+int ptrace_getfpregs(struct task_struct *child, __u32 __user *data)
+{
+	int i;
+
+	if (!access_ok(VERIFY_WRITE, data, 33 * 8))
+		return -EIO;
+
+	if (tsk_used_math(child)) {
+		union fpureg *fregs = get_fpu_regs(child);
+		for (i = 0; i < 32; i++)
+			__put_user(get_fpr64(&fregs[i], 0),
+				   i + (__u64 __user *)data);
+	} else {
+		for (i = 0; i < 32; i++)
+			__put_user((__u64) -1, i + (__u64 __user *) data);
+	}
+
+	__put_user(child->thread.fpu.fcr31, data + 64);
+	__put_user(boot_cpu_data.fpu_id, data + 65);
+
+	return 0;
+}
+
+int ptrace_setfpregs(struct task_struct *child, __u32 __user *data)
+{
+	union fpureg *fregs;
+	u64 fpr_val;
+	u32 fcr31;
+	u32 value;
+	u32 mask;
+	int i;
+
+	if (!access_ok(VERIFY_READ, data, 33 * 8))
+		return -EIO;
+
+	init_fp_ctx(child);
+	fregs = get_fpu_regs(child);
+
+	for (i = 0; i < 32; i++) {
+		__get_user(fpr_val, i + (__u64 __user *)data);
+		set_fpr64(&fregs[i], 0, fpr_val);
+	}
+
+	__get_user(value, data + 64);
+	fcr31 = child->thread.fpu.fcr31;
+	mask = boot_cpu_data.fpu_msk31;
+	child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask);
+
+	/* FIR may not be written.  */
+
+	return 0;
+}
+
+int ptrace_get_watch_regs(struct task_struct *child,
+			  struct pt_watch_regs __user *addr)
+{
+	enum pt_watch_style style;
+	int i;
+
+	if (!cpu_has_watch || boot_cpu_data.watch_reg_use_cnt == 0)
+		return -EIO;
+	if (!access_ok(VERIFY_WRITE, addr, sizeof(struct pt_watch_regs)))
+		return -EIO;
+
+#ifdef CONFIG_32BIT
+	style = pt_watch_style_mips32;
+#define WATCH_STYLE mips32
+#else
+	style = pt_watch_style_mips64;
+#define WATCH_STYLE mips64
+#endif
+
+	__put_user(style, &addr->style);
+	__put_user(boot_cpu_data.watch_reg_use_cnt,
+		   &addr->WATCH_STYLE.num_valid);
+	for (i = 0; i < boot_cpu_data.watch_reg_use_cnt; i++) {
+		__put_user(child->thread.watch.mips3264.watchlo[i],
+			   &addr->WATCH_STYLE.watchlo[i]);
+		__put_user(child->thread.watch.mips3264.watchhi[i] & 0xfff,
+			   &addr->WATCH_STYLE.watchhi[i]);
+		__put_user(boot_cpu_data.watch_reg_masks[i],
+			   &addr->WATCH_STYLE.watch_masks[i]);
+	}
+	for (; i < 8; i++) {
+		__put_user(0, &addr->WATCH_STYLE.watchlo[i]);
+		__put_user(0, &addr->WATCH_STYLE.watchhi[i]);
+		__put_user(0, &addr->WATCH_STYLE.watch_masks[i]);
+	}
+
+	return 0;
+}
+
+int ptrace_set_watch_regs(struct task_struct *child,
+			  struct pt_watch_regs __user *addr)
+{
+	int i;
+	int watch_active = 0;
+	unsigned long lt[NUM_WATCH_REGS];
+	u16 ht[NUM_WATCH_REGS];
+
+	if (!cpu_has_watch || boot_cpu_data.watch_reg_use_cnt == 0)
+		return -EIO;
+	if (!access_ok(VERIFY_READ, addr, sizeof(struct pt_watch_regs)))
+		return -EIO;
+	/* Check the values. */
+	for (i = 0; i < boot_cpu_data.watch_reg_use_cnt; i++) {
+		__get_user(lt[i], &addr->WATCH_STYLE.watchlo[i]);
+#ifdef CONFIG_32BIT
+		if (lt[i] & __UA_LIMIT)
+			return -EINVAL;
+#else
+		if (test_tsk_thread_flag(child, TIF_32BIT_ADDR)) {
+			if (lt[i] & 0xffffffff80000000UL)
+				return -EINVAL;
+		} else {
+			if (lt[i] & __UA_LIMIT)
+				return -EINVAL;
+		}
+#endif
+		__get_user(ht[i], &addr->WATCH_STYLE.watchhi[i]);
+		if (ht[i] & ~0xff8)
+			return -EINVAL;
+	}
+	/* Install them. */
+	for (i = 0; i < boot_cpu_data.watch_reg_use_cnt; i++) {
+		if (lt[i] & 7)
+			watch_active = 1;
+		child->thread.watch.mips3264.watchlo[i] = lt[i];
+		/* Set the G bit. */
+		child->thread.watch.mips3264.watchhi[i] = ht[i];
+	}
+
+	if (watch_active)
+		set_tsk_thread_flag(child, TIF_LOAD_WATCH);
+	else
+		clear_tsk_thread_flag(child, TIF_LOAD_WATCH);
+
+	return 0;
+}
+
+/* regset get/set implementations */
+
+#if defined(CONFIG_32BIT) || defined(CONFIG_MIPS32_O32)
+
+static int gpr32_get(struct task_struct *target,
+		     const struct user_regset *regset,
+		     unsigned int pos, unsigned int count,
+		     void *kbuf, void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	u32 uregs[ELF_NGREG] = {};
+	unsigned i;
+
+	for (i = MIPS32_EF_R1; i <= MIPS32_EF_R31; i++) {
+		/* k0/k1 are copied as zero. */
+		if (i == MIPS32_EF_R26 || i == MIPS32_EF_R27)
+			continue;
+
+		uregs[i] = regs->regs[i - MIPS32_EF_R0];
+	}
+
+	uregs[MIPS32_EF_LO] = regs->lo;
+	uregs[MIPS32_EF_HI] = regs->hi;
+	uregs[MIPS32_EF_CP0_EPC] = regs->cp0_epc;
+	uregs[MIPS32_EF_CP0_BADVADDR] = regs->cp0_badvaddr;
+	uregs[MIPS32_EF_CP0_STATUS] = regs->cp0_status;
+	uregs[MIPS32_EF_CP0_CAUSE] = regs->cp0_cause;
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, uregs, 0,
+				   sizeof(uregs));
+}
+
+static int gpr32_set(struct task_struct *target,
+		     const struct user_regset *regset,
+		     unsigned int pos, unsigned int count,
+		     const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	u32 uregs[ELF_NGREG];
+	unsigned start, num_regs, i;
+	int err;
+
+	start = pos / sizeof(u32);
+	num_regs = count / sizeof(u32);
+
+	if (start + num_regs > ELF_NGREG)
+		return -EIO;
+
+	err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, uregs, 0,
+				 sizeof(uregs));
+	if (err)
+		return err;
+
+	for (i = start; i < num_regs; i++) {
+		/*
+		 * Cast all values to signed here so that if this is a 64-bit
+		 * kernel, the supplied 32-bit values will be sign extended.
+		 */
+		switch (i) {
+		case MIPS32_EF_R1 ... MIPS32_EF_R25:
+			/* k0/k1 are ignored. */
+		case MIPS32_EF_R28 ... MIPS32_EF_R31:
+			regs->regs[i - MIPS32_EF_R0] = (s32)uregs[i];
+			break;
+		case MIPS32_EF_LO:
+			regs->lo = (s32)uregs[i];
+			break;
+		case MIPS32_EF_HI:
+			regs->hi = (s32)uregs[i];
+			break;
+		case MIPS32_EF_CP0_EPC:
+			regs->cp0_epc = (s32)uregs[i];
+			break;
+		}
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_32BIT || CONFIG_MIPS32_O32 */
+
+#ifdef CONFIG_64BIT
+
+static int gpr64_get(struct task_struct *target,
+		     const struct user_regset *regset,
+		     unsigned int pos, unsigned int count,
+		     void *kbuf, void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	u64 uregs[ELF_NGREG] = {};
+	unsigned i;
+
+	for (i = MIPS64_EF_R1; i <= MIPS64_EF_R31; i++) {
+		/* k0/k1 are copied as zero. */
+		if (i == MIPS64_EF_R26 || i == MIPS64_EF_R27)
+			continue;
+
+		uregs[i] = regs->regs[i - MIPS64_EF_R0];
+	}
+
+	uregs[MIPS64_EF_LO] = regs->lo;
+	uregs[MIPS64_EF_HI] = regs->hi;
+	uregs[MIPS64_EF_CP0_EPC] = regs->cp0_epc;
+	uregs[MIPS64_EF_CP0_BADVADDR] = regs->cp0_badvaddr;
+	uregs[MIPS64_EF_CP0_STATUS] = regs->cp0_status;
+	uregs[MIPS64_EF_CP0_CAUSE] = regs->cp0_cause;
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, uregs, 0,
+				   sizeof(uregs));
+}
+
+static int gpr64_set(struct task_struct *target,
+		     const struct user_regset *regset,
+		     unsigned int pos, unsigned int count,
+		     const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	u64 uregs[ELF_NGREG];
+	unsigned start, num_regs, i;
+	int err;
+
+	start = pos / sizeof(u64);
+	num_regs = count / sizeof(u64);
+
+	if (start + num_regs > ELF_NGREG)
+		return -EIO;
+
+	err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, uregs, 0,
+				 sizeof(uregs));
+	if (err)
+		return err;
+
+	for (i = start; i < num_regs; i++) {
+		switch (i) {
+		case MIPS64_EF_R1 ... MIPS64_EF_R25:
+			/* k0/k1 are ignored. */
+		case MIPS64_EF_R28 ... MIPS64_EF_R31:
+			regs->regs[i - MIPS64_EF_R0] = uregs[i];
+			break;
+		case MIPS64_EF_LO:
+			regs->lo = uregs[i];
+			break;
+		case MIPS64_EF_HI:
+			regs->hi = uregs[i];
+			break;
+		case MIPS64_EF_CP0_EPC:
+			regs->cp0_epc = uregs[i];
+			break;
+		}
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_64BIT */
+
+static int fpr_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	unsigned i;
+	int err;
+	u64 fpr_val;
+
+	/* XXX fcr31  */
+
+	if (sizeof(target->thread.fpu.fpr[i]) == sizeof(elf_fpreg_t))
+		return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					   &target->thread.fpu,
+					   0, sizeof(elf_fpregset_t));
+
+	for (i = 0; i < NUM_FPU_REGS; i++) {
+		fpr_val = get_fpr64(&target->thread.fpu.fpr[i], 0);
+		err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  &fpr_val, i * sizeof(elf_fpreg_t),
+					  (i + 1) * sizeof(elf_fpreg_t));
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int fpr_set(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	unsigned i;
+	int err;
+	u64 fpr_val;
+
+	/* XXX fcr31  */
+
+	init_fp_ctx(target);
+
+	if (sizeof(target->thread.fpu.fpr[i]) == sizeof(elf_fpreg_t))
+		return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					  &target->thread.fpu,
+					  0, sizeof(elf_fpregset_t));
+
+	for (i = 0; i < NUM_FPU_REGS; i++) {
+		err = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 &fpr_val, i * sizeof(elf_fpreg_t),
+					 (i + 1) * sizeof(elf_fpreg_t));
+		if (err)
+			return err;
+		set_fpr64(&target->thread.fpu.fpr[i], 0, fpr_val);
+	}
+
+	return 0;
+}
+
+enum mips_regset {
+	REGSET_GPR,
+	REGSET_FPR,
+};
+
+#if defined(CONFIG_32BIT) || defined(CONFIG_MIPS32_O32)
+
+static const struct user_regset mips_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(unsigned int),
+		.align		= sizeof(unsigned int),
+		.get		= gpr32_get,
+		.set		= gpr32_set,
+	},
+	[REGSET_FPR] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= ELF_NFPREG,
+		.size		= sizeof(elf_fpreg_t),
+		.align		= sizeof(elf_fpreg_t),
+		.get		= fpr_get,
+		.set		= fpr_set,
+	},
+};
+
+static const struct user_regset_view user_mips_view = {
+	.name		= "mips",
+	.e_machine	= ELF_ARCH,
+	.ei_osabi	= ELF_OSABI,
+	.regsets	= mips_regsets,
+	.n		= ARRAY_SIZE(mips_regsets),
+};
+
+#endif /* CONFIG_32BIT || CONFIG_MIPS32_O32 */
+
+#ifdef CONFIG_64BIT
+
+static const struct user_regset mips64_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(unsigned long),
+		.align		= sizeof(unsigned long),
+		.get		= gpr64_get,
+		.set		= gpr64_set,
+	},
+	[REGSET_FPR] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= ELF_NFPREG,
+		.size		= sizeof(elf_fpreg_t),
+		.align		= sizeof(elf_fpreg_t),
+		.get		= fpr_get,
+		.set		= fpr_set,
+	},
+};
+
+static const struct user_regset_view user_mips64_view = {
+	.name		= "mips64",
+	.e_machine	= ELF_ARCH,
+	.ei_osabi	= ELF_OSABI,
+	.regsets	= mips64_regsets,
+	.n		= ARRAY_SIZE(mips64_regsets),
+};
+
+#endif /* CONFIG_64BIT */
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+#ifdef CONFIG_32BIT
+	return &user_mips_view;
+#else
+#ifdef CONFIG_MIPS32_O32
+	if (test_tsk_thread_flag(task, TIF_32BIT_REGS))
+		return &user_mips_view;
+#endif
+	return &user_mips64_view;
+#endif
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	int ret;
+	void __user *addrp = (void __user *) addr;
+	void __user *datavp = (void __user *) data;
+	unsigned long __user *datalp = (void __user *) data;
+
+	switch (request) {
+	/* when I and D space are separate, these will need to be fixed. */
+	case PTRACE_PEEKTEXT: /* read word at location addr. */
+	case PTRACE_PEEKDATA:
+		ret = generic_ptrace_peekdata(child, addr, data);
+		break;
+
+	/* Read the word at location addr in the USER area. */
+	case PTRACE_PEEKUSR: {
+		struct pt_regs *regs;
+		union fpureg *fregs;
+		unsigned long tmp = 0;
+
+		regs = task_pt_regs(child);
+		ret = 0;  /* Default return value. */
+
+		switch (addr) {
+		case 0 ... 31:
+			tmp = regs->regs[addr];
+			break;
+		case FPR_BASE ... FPR_BASE + 31:
+			if (!tsk_used_math(child)) {
+				/* FP not yet used */
+				tmp = -1;
+				break;
+			}
+			fregs = get_fpu_regs(child);
+
+#ifdef CONFIG_32BIT
+			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+				/*
+				 * The odd registers are actually the high
+				 * order bits of the values stored in the even
+				 * registers - unless we're using r2k_switch.S.
+				 */
+				tmp = get_fpr32(&fregs[(addr & ~1) - FPR_BASE],
+						addr & 1);
+				break;
+			}
+#endif
+			tmp = get_fpr32(&fregs[addr - FPR_BASE], 0);
+			break;
+		case PC:
+			tmp = regs->cp0_epc;
+			break;
+		case CAUSE:
+			tmp = regs->cp0_cause;
+			break;
+		case BADVADDR:
+			tmp = regs->cp0_badvaddr;
+			break;
+		case MMHI:
+			tmp = regs->hi;
+			break;
+		case MMLO:
+			tmp = regs->lo;
+			break;
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+		case ACX:
+			tmp = regs->acx;
+			break;
+#endif
+		case FPC_CSR:
+			tmp = child->thread.fpu.fcr31;
+			break;
+		case FPC_EIR:
+			/* implementation / version register */
+			tmp = boot_cpu_data.fpu_id;
+			break;
+		case DSP_BASE ... DSP_BASE + 5: {
+			dspreg_t *dregs;
+
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out;
+			}
+			dregs = __get_dsp_regs(child);
+			tmp = (unsigned long) (dregs[addr - DSP_BASE]);
+			break;
+		}
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out;
+			}
+			tmp = child->thread.dsp.dspcontrol;
+			break;
+		default:
+			tmp = 0;
+			ret = -EIO;
+			goto out;
+		}
+		ret = put_user(tmp, datalp);
+		break;
+	}
+
+	/* when I and D space are separate, this will have to be fixed. */
+	case PTRACE_POKETEXT: /* write the word at location addr. */
+	case PTRACE_POKEDATA:
+		ret = generic_ptrace_pokedata(child, addr, data);
+		break;
+
+	case PTRACE_POKEUSR: {
+		struct pt_regs *regs;
+		ret = 0;
+		regs = task_pt_regs(child);
+
+		switch (addr) {
+		case 0 ... 31:
+			regs->regs[addr] = data;
+			break;
+		case FPR_BASE ... FPR_BASE + 31: {
+			union fpureg *fregs = get_fpu_regs(child);
+
+			init_fp_ctx(child);
+#ifdef CONFIG_32BIT
+			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+				/*
+				 * The odd registers are actually the high
+				 * order bits of the values stored in the even
+				 * registers - unless we're using r2k_switch.S.
+				 */
+				set_fpr32(&fregs[(addr & ~1) - FPR_BASE],
+					  addr & 1, data);
+				break;
+			}
+#endif
+			set_fpr64(&fregs[addr - FPR_BASE], 0, data);
+			break;
+		}
+		case PC:
+			regs->cp0_epc = data;
+			break;
+		case MMHI:
+			regs->hi = data;
+			break;
+		case MMLO:
+			regs->lo = data;
+			break;
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+		case ACX:
+			regs->acx = data;
+			break;
+#endif
+		case FPC_CSR:
+			child->thread.fpu.fcr31 = data & ~FPU_CSR_ALL_X;
+			break;
+		case DSP_BASE ... DSP_BASE + 5: {
+			dspreg_t *dregs;
+
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+
+			dregs = __get_dsp_regs(child);
+			dregs[addr - DSP_BASE] = data;
+			break;
+		}
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+			child->thread.dsp.dspcontrol = data;
+			break;
+		default:
+			/* The rest are not allowed. */
+			ret = -EIO;
+			break;
+		}
+		break;
+		}
+
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs(child, datavp);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs(child, datavp);
+		break;
+
+	case PTRACE_GETFPREGS:
+		ret = ptrace_getfpregs(child, datavp);
+		break;
+
+	case PTRACE_SETFPREGS:
+		ret = ptrace_setfpregs(child, datavp);
+		break;
+
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(task_thread_info(child)->tp_value, datalp);
+		break;
+
+	case PTRACE_GET_WATCH_REGS:
+		ret = ptrace_get_watch_regs(child, addrp);
+		break;
+
+	case PTRACE_SET_WATCH_REGS:
+		ret = ptrace_set_watch_regs(child, addrp);
+		break;
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+ out:
+	return ret;
+}
+
+/*
+ * Notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
+{
+	long ret = 0;
+	user_exit();
+
+	current_thread_info()->syscall = syscall;
+
+	if (secure_computing() == -1)
+		return -1;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		ret = -1;
+
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_enter(regs, regs->regs[2]);
+
+	audit_syscall_entry(syscall, regs->regs[4], regs->regs[5],
+			    regs->regs[6], regs->regs[7]);
+	return syscall;
+}
+
+/*
+ * Notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+{
+        /*
+	 * We may come here right after calling schedule_user()
+	 * or do_notify_resume(), in which case we can be in RCU
+	 * user mode.
+	 */
+	user_exit();
+
+	audit_syscall_exit(regs);
+
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_exit(regs, regs->regs[2]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, 0);
+
+	user_enter();
+}
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
new file mode 100644
index 000000000..283b5a196
--- /dev/null
+++ b/arch/mips/kernel/ptrace32.c
@@ -0,0 +1,302 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 Ross Biro
+ * Copyright (C) Linus Torvalds
+ * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
+ * Copyright (C) 1996 David S. Miller
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999 MIPS Technologies, Inc.
+ * Copyright (C) 2000 Ulf Carlsson
+ *
+ * At this time Linux/MIPS64 only supports syscall tracing, even for 32-bit
+ * binaries.
+ */
+#include <linux/compiler.h>
+#include <linux/compat.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/smp.h>
+#include <linux/security.h>
+
+#include <asm/cpu.h>
+#include <asm/dsp.h>
+#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/reg.h>
+#include <asm/uaccess.h>
+#include <asm/bootinfo.h>
+
+/*
+ * Tracing a 32-bit process with a 64-bit strace and vice versa will not
+ * work.  I don't know how to fix this.
+ */
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+			compat_ulong_t caddr, compat_ulong_t cdata)
+{
+	int addr = caddr;
+	int data = cdata;
+	int ret;
+
+	switch (request) {
+
+	/*
+	 * Read 4 bytes of the other process' storage
+	 *  data is a pointer specifying where the user wants the
+	 *	4 bytes copied into
+	 *  addr is a pointer in the user's storage that contains an 8 byte
+	 *	address in the other process of the 4 bytes that is to be read
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 * when I and D space are separate, these will need to be fixed.
+	 */
+	case PTRACE_PEEKTEXT_3264:
+	case PTRACE_PEEKDATA_3264: {
+		u32 tmp;
+		int copied;
+		u32 __user * addrOthers;
+
+		ret = -EIO;
+
+		/* Get the addr in the other process that we want to read */
+		if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+			break;
+
+		copied = access_process_vm(child, (u64)addrOthers, &tmp,
+				sizeof(tmp), 0);
+		if (copied != sizeof(tmp))
+			break;
+		ret = put_user(tmp, (u32 __user *) (unsigned long) data);
+		break;
+	}
+
+	/* Read the word at location addr in the USER area. */
+	case PTRACE_PEEKUSR: {
+		struct pt_regs *regs;
+		union fpureg *fregs;
+		unsigned int tmp;
+
+		regs = task_pt_regs(child);
+		ret = 0;  /* Default return value. */
+
+		switch (addr) {
+		case 0 ... 31:
+			tmp = regs->regs[addr];
+			break;
+		case FPR_BASE ... FPR_BASE + 31:
+			if (!tsk_used_math(child)) {
+				/* FP not yet used */
+				tmp = -1;
+				break;
+			}
+			fregs = get_fpu_regs(child);
+			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+				/*
+				 * The odd registers are actually the high
+				 * order bits of the values stored in the even
+				 * registers - unless we're using r2k_switch.S.
+				 */
+				tmp = get_fpr32(&fregs[(addr & ~1) - FPR_BASE],
+						addr & 1);
+				break;
+			}
+			tmp = get_fpr32(&fregs[addr - FPR_BASE], 0);
+			break;
+		case PC:
+			tmp = regs->cp0_epc;
+			break;
+		case CAUSE:
+			tmp = regs->cp0_cause;
+			break;
+		case BADVADDR:
+			tmp = regs->cp0_badvaddr;
+			break;
+		case MMHI:
+			tmp = regs->hi;
+			break;
+		case MMLO:
+			tmp = regs->lo;
+			break;
+		case FPC_CSR:
+			tmp = child->thread.fpu.fcr31;
+			break;
+		case FPC_EIR:
+			/* implementation / version register */
+			tmp = boot_cpu_data.fpu_id;
+			break;
+		case DSP_BASE ... DSP_BASE + 5: {
+			dspreg_t *dregs;
+
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out;
+			}
+			dregs = __get_dsp_regs(child);
+			tmp = (unsigned long) (dregs[addr - DSP_BASE]);
+			break;
+		}
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out;
+			}
+			tmp = child->thread.dsp.dspcontrol;
+			break;
+		default:
+			tmp = 0;
+			ret = -EIO;
+			goto out;
+		}
+		ret = put_user(tmp, (unsigned __user *) (unsigned long) data);
+		break;
+	}
+
+	/*
+	 * Write 4 bytes into the other process' storage
+	 *  data is the 4 bytes that the user wants written
+	 *  addr is a pointer in the user's storage that contains an
+	 *	8 byte address in the other process where the 4 bytes
+	 *	that is to be written
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 * when I and D space are separate, these will need to be fixed.
+	 */
+	case PTRACE_POKETEXT_3264:
+	case PTRACE_POKEDATA_3264: {
+		u32 __user * addrOthers;
+
+		/* Get the addr in the other process that we want to write into */
+		ret = -EIO;
+		if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+			break;
+		ret = 0;
+		if (access_process_vm(child, (u64)addrOthers, &data,
+					sizeof(data), 1) == sizeof(data))
+			break;
+		ret = -EIO;
+		break;
+	}
+
+	case PTRACE_POKEUSR: {
+		struct pt_regs *regs;
+		ret = 0;
+		regs = task_pt_regs(child);
+
+		switch (addr) {
+		case 0 ... 31:
+			regs->regs[addr] = data;
+			break;
+		case FPR_BASE ... FPR_BASE + 31: {
+			union fpureg *fregs = get_fpu_regs(child);
+
+			if (!tsk_used_math(child)) {
+				/* FP not yet used  */
+				memset(&child->thread.fpu, ~0,
+				       sizeof(child->thread.fpu));
+				child->thread.fpu.fcr31 = 0;
+			}
+			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+				/*
+				 * The odd registers are actually the high
+				 * order bits of the values stored in the even
+				 * registers - unless we're using r2k_switch.S.
+				 */
+				set_fpr32(&fregs[(addr & ~1) - FPR_BASE],
+					  addr & 1, data);
+				break;
+			}
+			set_fpr64(&fregs[addr - FPR_BASE], 0, data);
+			break;
+		}
+		case PC:
+			regs->cp0_epc = data;
+			break;
+		case MMHI:
+			regs->hi = data;
+			break;
+		case MMLO:
+			regs->lo = data;
+			break;
+		case FPC_CSR:
+			child->thread.fpu.fcr31 = data;
+			break;
+		case DSP_BASE ... DSP_BASE + 5: {
+			dspreg_t *dregs;
+
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+
+			dregs = __get_dsp_regs(child);
+			dregs[addr - DSP_BASE] = data;
+			break;
+		}
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+			child->thread.dsp.dspcontrol = data;
+			break;
+		default:
+			/* The rest are not allowed. */
+			ret = -EIO;
+			break;
+		}
+		break;
+		}
+
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs(child,
+				(struct user_pt_regs __user *) (__u64) data);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs(child,
+				(struct user_pt_regs __user *) (__u64) data);
+		break;
+
+	case PTRACE_GETFPREGS:
+		ret = ptrace_getfpregs(child, (__u32 __user *) (__u64) data);
+		break;
+
+	case PTRACE_SETFPREGS:
+		ret = ptrace_setfpregs(child, (__u32 __user *) (__u64) data);
+		break;
+
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(task_thread_info(child)->tp_value,
+				(unsigned int __user *) (unsigned long) data);
+		break;
+
+	case PTRACE_GET_THREAD_AREA_3264:
+		ret = put_user(task_thread_info(child)->tp_value,
+				(unsigned long __user *) (unsigned long) data);
+		break;
+
+	case PTRACE_GET_WATCH_REGS:
+		ret = ptrace_get_watch_regs(child,
+			(struct pt_watch_regs __user *) (unsigned long) addr);
+		break;
+
+	case PTRACE_SET_WATCH_REGS:
+		ret = ptrace_set_watch_regs(child,
+			(struct pt_watch_regs __user *) (unsigned long) addr);
+		break;
+
+	default:
+		ret = compat_ptrace_request(child, request, addr, data);
+		break;
+	}
+out:
+	return ret;
+}
diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S
new file mode 100644
index 000000000..5ce3b746c
--- /dev/null
+++ b/arch/mips/kernel/r2300_fpu.S
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1998 by Ralf Baechle
+ *
+ * Multi-arch abstraction and asm macros for easier reading:
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ *
+ * Further modifications to make this work:
+ * Copyright (c) 1998 Harald Koerfgen
+ */
+#include <asm/asm.h>
+#include <asm/errno.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+
+#define EX(a,b)							\
+9:	a,##b;							\
+	.section __ex_table,"a";				\
+	PTR	9b,bad_stack;					\
+	.previous
+
+	.set	noreorder
+	.set	mips1
+	/* Save floating point context */
+LEAF(_save_fp_context)
+	.set	push
+	SET_HARDFLOAT
+	li	v0, 0					# assume success
+	cfc1	t1,fcr31
+	EX(swc1 $f0,(SC_FPREGS+0)(a0))
+	EX(swc1 $f1,(SC_FPREGS+8)(a0))
+	EX(swc1 $f2,(SC_FPREGS+16)(a0))
+	EX(swc1 $f3,(SC_FPREGS+24)(a0))
+	EX(swc1 $f4,(SC_FPREGS+32)(a0))
+	EX(swc1 $f5,(SC_FPREGS+40)(a0))
+	EX(swc1 $f6,(SC_FPREGS+48)(a0))
+	EX(swc1 $f7,(SC_FPREGS+56)(a0))
+	EX(swc1 $f8,(SC_FPREGS+64)(a0))
+	EX(swc1 $f9,(SC_FPREGS+72)(a0))
+	EX(swc1 $f10,(SC_FPREGS+80)(a0))
+	EX(swc1 $f11,(SC_FPREGS+88)(a0))
+	EX(swc1 $f12,(SC_FPREGS+96)(a0))
+	EX(swc1 $f13,(SC_FPREGS+104)(a0))
+	EX(swc1 $f14,(SC_FPREGS+112)(a0))
+	EX(swc1 $f15,(SC_FPREGS+120)(a0))
+	EX(swc1 $f16,(SC_FPREGS+128)(a0))
+	EX(swc1 $f17,(SC_FPREGS+136)(a0))
+	EX(swc1 $f18,(SC_FPREGS+144)(a0))
+	EX(swc1 $f19,(SC_FPREGS+152)(a0))
+	EX(swc1 $f20,(SC_FPREGS+160)(a0))
+	EX(swc1 $f21,(SC_FPREGS+168)(a0))
+	EX(swc1 $f22,(SC_FPREGS+176)(a0))
+	EX(swc1 $f23,(SC_FPREGS+184)(a0))
+	EX(swc1 $f24,(SC_FPREGS+192)(a0))
+	EX(swc1 $f25,(SC_FPREGS+200)(a0))
+	EX(swc1 $f26,(SC_FPREGS+208)(a0))
+	EX(swc1 $f27,(SC_FPREGS+216)(a0))
+	EX(swc1 $f28,(SC_FPREGS+224)(a0))
+	EX(swc1 $f29,(SC_FPREGS+232)(a0))
+	EX(swc1 $f30,(SC_FPREGS+240)(a0))
+	EX(swc1 $f31,(SC_FPREGS+248)(a0))
+	EX(sw	t1,(SC_FPC_CSR)(a0))
+	cfc1	t0,$0				# implementation/version
+	jr	ra
+	.set	pop
+	.set	nomacro
+	 EX(sw	t0,(SC_FPC_EIR)(a0))
+	.set	macro
+	END(_save_fp_context)
+
+/*
+ * Restore FPU state:
+ *  - fp gp registers
+ *  - cp1 status/control register
+ *
+ * We base the decision which registers to restore from the signal stack
+ * frame on the current content of c0_status, not on the content of the
+ * stack frame which might have been changed by the user.
+ */
+LEAF(_restore_fp_context)
+	.set	push
+	SET_HARDFLOAT
+	li	v0, 0					# assume success
+	EX(lw t0,(SC_FPC_CSR)(a0))
+	EX(lwc1 $f0,(SC_FPREGS+0)(a0))
+	EX(lwc1 $f1,(SC_FPREGS+8)(a0))
+	EX(lwc1 $f2,(SC_FPREGS+16)(a0))
+	EX(lwc1 $f3,(SC_FPREGS+24)(a0))
+	EX(lwc1 $f4,(SC_FPREGS+32)(a0))
+	EX(lwc1 $f5,(SC_FPREGS+40)(a0))
+	EX(lwc1 $f6,(SC_FPREGS+48)(a0))
+	EX(lwc1 $f7,(SC_FPREGS+56)(a0))
+	EX(lwc1 $f8,(SC_FPREGS+64)(a0))
+	EX(lwc1 $f9,(SC_FPREGS+72)(a0))
+	EX(lwc1 $f10,(SC_FPREGS+80)(a0))
+	EX(lwc1 $f11,(SC_FPREGS+88)(a0))
+	EX(lwc1 $f12,(SC_FPREGS+96)(a0))
+	EX(lwc1 $f13,(SC_FPREGS+104)(a0))
+	EX(lwc1 $f14,(SC_FPREGS+112)(a0))
+	EX(lwc1 $f15,(SC_FPREGS+120)(a0))
+	EX(lwc1 $f16,(SC_FPREGS+128)(a0))
+	EX(lwc1 $f17,(SC_FPREGS+136)(a0))
+	EX(lwc1 $f18,(SC_FPREGS+144)(a0))
+	EX(lwc1 $f19,(SC_FPREGS+152)(a0))
+	EX(lwc1 $f20,(SC_FPREGS+160)(a0))
+	EX(lwc1 $f21,(SC_FPREGS+168)(a0))
+	EX(lwc1 $f22,(SC_FPREGS+176)(a0))
+	EX(lwc1 $f23,(SC_FPREGS+184)(a0))
+	EX(lwc1 $f24,(SC_FPREGS+192)(a0))
+	EX(lwc1 $f25,(SC_FPREGS+200)(a0))
+	EX(lwc1 $f26,(SC_FPREGS+208)(a0))
+	EX(lwc1 $f27,(SC_FPREGS+216)(a0))
+	EX(lwc1 $f28,(SC_FPREGS+224)(a0))
+	EX(lwc1 $f29,(SC_FPREGS+232)(a0))
+	EX(lwc1 $f30,(SC_FPREGS+240)(a0))
+	EX(lwc1 $f31,(SC_FPREGS+248)(a0))
+	jr	ra
+	 ctc1	t0,fcr31
+	.set	pop
+	END(_restore_fp_context)
+	.set	reorder
+
+	.type	fault@function
+	.ent	fault
+fault:	li	v0, -EFAULT
+	jr	ra
+	.end	fault
diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S
new file mode 100644
index 000000000..5087a4b72
--- /dev/null
+++ b/arch/mips/kernel/r2300_switch.S
@@ -0,0 +1,169 @@
+/*
+ * r2300_switch.S: R2300 specific task switching code.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
+ * Copyright (C) 1994, 1995, 1996 by Andreas Busse
+ *
+ * Multi-cpu abstraction and macros for easier reading:
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ *
+ * Further modifications to make this work:
+ * Copyright (c) 1998-2000 Harald Koerfgen
+ */
+#include <asm/asm.h>
+#include <asm/cachectl.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/thread_info.h>
+
+#include <asm/asmmacro.h>
+
+	.set	mips1
+	.align	5
+
+/*
+ * Offset to the current process status flags, the first 32 bytes of the
+ * stack are not used.
+ */
+#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
+
+/*
+ * FPU context is saved iff the process has used it's FPU in the current
+ * time slice as indicated by TIF_USEDFPU.  In any case, the CU1 bit for user
+ * space STATUS register should be 0, so that a process *always* starts its
+ * userland with FPU disabled after each context switch.
+ *
+ * FPU will be enabled as soon as the process accesses FPU again, through
+ * do_cpu() trap.
+ */
+
+/*
+ * task_struct *resume(task_struct *prev, task_struct *next,
+ *		       struct thread_info *next_ti, int usedfpu)
+ */
+LEAF(resume)
+	mfc0	t1, CP0_STATUS
+	sw	t1, THREAD_STATUS(a0)
+	cpu_save_nonscratch a0
+	sw	ra, THREAD_REG31(a0)
+
+	beqz	a3, 1f
+
+	PTR_L	t3, TASK_THREAD_INFO(a0)
+
+	/*
+	 * clear saved user stack CU1 bit
+	 */
+	lw	t0, ST_OFF(t3)
+	li	t1, ~ST0_CU1
+	and	t0, t0, t1
+	sw	t0, ST_OFF(t3)
+
+	fpu_save_single a0, t0			# clobbers t0
+
+1:
+
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	PTR_LA	t8, __stack_chk_guard
+	LONG_L	t9, TASK_STACK_CANARY(a1)
+	LONG_S	t9, 0(t8)
+#endif
+
+	/*
+	 * The order of restoring the registers takes care of the race
+	 * updating $28, $29 and kernelsp without disabling ints.
+	 */
+	move	$28, a2
+	cpu_restore_nonscratch a1
+
+	addiu	t1, $28, _THREAD_SIZE - 32
+	sw	t1, kernelsp
+
+	mfc0	t1, CP0_STATUS		/* Do we really need this? */
+	li	a3, 0xff01
+	and	t1, a3
+	lw	a2, THREAD_STATUS(a1)
+	nor	a3, $0, a3
+	and	a2, a3
+	or	a2, t1
+	mtc0	a2, CP0_STATUS
+	move	v0, a0
+	jr	ra
+	END(resume)
+
+/*
+ * Save a thread's fp context.
+ */
+LEAF(_save_fp)
+	fpu_save_single a0, t1			# clobbers t1
+	jr	ra
+	END(_save_fp)
+
+/*
+ * Restore a thread's fp context.
+ */
+LEAF(_restore_fp)
+	fpu_restore_single a0, t1		# clobbers t1
+	jr	ra
+	END(_restore_fp)
+
+/*
+ * Load the FPU with signalling NANS.  This bit pattern we're using has
+ * the property that no matter whether considered as single or as double
+ * precision represents signaling NANS.
+ *
+ * The value to initialize fcr31 to comes in $a0.
+ */
+
+	.set push
+	SET_HARDFLOAT
+
+LEAF(_init_fpu)
+	mfc0	t0, CP0_STATUS
+	li	t1, ST0_CU1
+	or	t0, t1
+	mtc0	t0, CP0_STATUS
+
+	ctc1	a0, fcr31
+
+	li	t0, -1
+
+	mtc1	t0, $f0
+	mtc1	t0, $f1
+	mtc1	t0, $f2
+	mtc1	t0, $f3
+	mtc1	t0, $f4
+	mtc1	t0, $f5
+	mtc1	t0, $f6
+	mtc1	t0, $f7
+	mtc1	t0, $f8
+	mtc1	t0, $f9
+	mtc1	t0, $f10
+	mtc1	t0, $f11
+	mtc1	t0, $f12
+	mtc1	t0, $f13
+	mtc1	t0, $f14
+	mtc1	t0, $f15
+	mtc1	t0, $f16
+	mtc1	t0, $f17
+	mtc1	t0, $f18
+	mtc1	t0, $f19
+	mtc1	t0, $f20
+	mtc1	t0, $f21
+	mtc1	t0, $f22
+	mtc1	t0, $f23
+	mtc1	t0, $f24
+	mtc1	t0, $f25
+	mtc1	t0, $f26
+	mtc1	t0, $f27
+	mtc1	t0, $f28
+	mtc1	t0, $f29
+	mtc1	t0, $f30
+	mtc1	t0, $f31
+	jr	ra
+	END(_init_fpu)
+
+	.set pop
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
new file mode 100644
index 000000000..1d88af26b
--- /dev/null
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -0,0 +1,283 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 98, 99, 2000, 01 Ralf Baechle
+ *
+ * Multi-arch abstraction and asm macros for easier reading:
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ * Copyright (C) 1999, 2001 Silicon Graphics, Inc.
+ */
+#include <asm/asm.h>
+#include <asm/errno.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
+	.macro	EX insn, reg, src
+	.set	push
+	SET_HARDFLOAT
+	.set	nomacro
+.ex\@:	\insn	\reg, \src
+	.set	pop
+	.section __ex_table,"a"
+	PTR	.ex\@, fault
+	.previous
+	.endm
+
+	.set	noreorder
+
+LEAF(_save_fp_context)
+	.set	push
+	SET_HARDFLOAT
+	cfc1	t1, fcr31
+	.set	pop
+
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
+		defined(CONFIG_CPU_MIPS32_R6)
+	.set	push
+	SET_HARDFLOAT
+#ifdef CONFIG_CPU_MIPS32_R2
+	.set	mips32r2
+	.set	fp=64
+	mfc0	t0, CP0_STATUS
+	sll	t0, t0, 5
+	bgez	t0, 1f			# skip storing odd if FR=0
+	 nop
+#endif
+	/* Store the 16 odd double precision registers */
+	EX	sdc1 $f1, SC_FPREGS+8(a0)
+	EX	sdc1 $f3, SC_FPREGS+24(a0)
+	EX	sdc1 $f5, SC_FPREGS+40(a0)
+	EX	sdc1 $f7, SC_FPREGS+56(a0)
+	EX	sdc1 $f9, SC_FPREGS+72(a0)
+	EX	sdc1 $f11, SC_FPREGS+88(a0)
+	EX	sdc1 $f13, SC_FPREGS+104(a0)
+	EX	sdc1 $f15, SC_FPREGS+120(a0)
+	EX	sdc1 $f17, SC_FPREGS+136(a0)
+	EX	sdc1 $f19, SC_FPREGS+152(a0)
+	EX	sdc1 $f21, SC_FPREGS+168(a0)
+	EX	sdc1 $f23, SC_FPREGS+184(a0)
+	EX	sdc1 $f25, SC_FPREGS+200(a0)
+	EX	sdc1 $f27, SC_FPREGS+216(a0)
+	EX	sdc1 $f29, SC_FPREGS+232(a0)
+	EX	sdc1 $f31, SC_FPREGS+248(a0)
+1:	.set	pop
+#endif
+
+	.set push
+	SET_HARDFLOAT
+	/* Store the 16 even double precision registers */
+	EX	sdc1 $f0, SC_FPREGS+0(a0)
+	EX	sdc1 $f2, SC_FPREGS+16(a0)
+	EX	sdc1 $f4, SC_FPREGS+32(a0)
+	EX	sdc1 $f6, SC_FPREGS+48(a0)
+	EX	sdc1 $f8, SC_FPREGS+64(a0)
+	EX	sdc1 $f10, SC_FPREGS+80(a0)
+	EX	sdc1 $f12, SC_FPREGS+96(a0)
+	EX	sdc1 $f14, SC_FPREGS+112(a0)
+	EX	sdc1 $f16, SC_FPREGS+128(a0)
+	EX	sdc1 $f18, SC_FPREGS+144(a0)
+	EX	sdc1 $f20, SC_FPREGS+160(a0)
+	EX	sdc1 $f22, SC_FPREGS+176(a0)
+	EX	sdc1 $f24, SC_FPREGS+192(a0)
+	EX	sdc1 $f26, SC_FPREGS+208(a0)
+	EX	sdc1 $f28, SC_FPREGS+224(a0)
+	EX	sdc1 $f30, SC_FPREGS+240(a0)
+	EX	sw t1, SC_FPC_CSR(a0)
+	jr	ra
+	 li	v0, 0					# success
+	.set pop
+	END(_save_fp_context)
+
+#ifdef CONFIG_MIPS32_COMPAT
+	/* Save 32-bit process floating point context */
+LEAF(_save_fp_context32)
+	.set push
+	.set MIPS_ISA_ARCH_LEVEL_RAW
+	SET_HARDFLOAT
+	cfc1	t1, fcr31
+
+#ifndef CONFIG_CPU_MIPS64_R6
+	mfc0	t0, CP0_STATUS
+	sll	t0, t0, 5
+	bgez	t0, 1f			# skip storing odd if FR=0
+	 nop
+#endif
+
+	/* Store the 16 odd double precision registers */
+	EX      sdc1 $f1, SC32_FPREGS+8(a0)
+	EX      sdc1 $f3, SC32_FPREGS+24(a0)
+	EX      sdc1 $f5, SC32_FPREGS+40(a0)
+	EX      sdc1 $f7, SC32_FPREGS+56(a0)
+	EX      sdc1 $f9, SC32_FPREGS+72(a0)
+	EX      sdc1 $f11, SC32_FPREGS+88(a0)
+	EX      sdc1 $f13, SC32_FPREGS+104(a0)
+	EX      sdc1 $f15, SC32_FPREGS+120(a0)
+	EX      sdc1 $f17, SC32_FPREGS+136(a0)
+	EX      sdc1 $f19, SC32_FPREGS+152(a0)
+	EX      sdc1 $f21, SC32_FPREGS+168(a0)
+	EX      sdc1 $f23, SC32_FPREGS+184(a0)
+	EX      sdc1 $f25, SC32_FPREGS+200(a0)
+	EX      sdc1 $f27, SC32_FPREGS+216(a0)
+	EX      sdc1 $f29, SC32_FPREGS+232(a0)
+	EX      sdc1 $f31, SC32_FPREGS+248(a0)
+
+	/* Store the 16 even double precision registers */
+1:	EX	sdc1 $f0, SC32_FPREGS+0(a0)
+	EX	sdc1 $f2, SC32_FPREGS+16(a0)
+	EX	sdc1 $f4, SC32_FPREGS+32(a0)
+	EX	sdc1 $f6, SC32_FPREGS+48(a0)
+	EX	sdc1 $f8, SC32_FPREGS+64(a0)
+	EX	sdc1 $f10, SC32_FPREGS+80(a0)
+	EX	sdc1 $f12, SC32_FPREGS+96(a0)
+	EX	sdc1 $f14, SC32_FPREGS+112(a0)
+	EX	sdc1 $f16, SC32_FPREGS+128(a0)
+	EX	sdc1 $f18, SC32_FPREGS+144(a0)
+	EX	sdc1 $f20, SC32_FPREGS+160(a0)
+	EX	sdc1 $f22, SC32_FPREGS+176(a0)
+	EX	sdc1 $f24, SC32_FPREGS+192(a0)
+	EX	sdc1 $f26, SC32_FPREGS+208(a0)
+	EX	sdc1 $f28, SC32_FPREGS+224(a0)
+	EX	sdc1 $f30, SC32_FPREGS+240(a0)
+	EX	sw t1, SC32_FPC_CSR(a0)
+	cfc1	t0, $0				# implementation/version
+	EX	sw t0, SC32_FPC_EIR(a0)
+	.set pop
+
+	jr	ra
+	 li	v0, 0					# success
+	END(_save_fp_context32)
+#endif
+
+/*
+ * Restore FPU state:
+ *  - fp gp registers
+ *  - cp1 status/control register
+ */
+LEAF(_restore_fp_context)
+	EX	lw t1, SC_FPC_CSR(a0)
+
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)  || \
+		defined(CONFIG_CPU_MIPS32_R6)
+	.set	push
+	SET_HARDFLOAT
+#ifdef CONFIG_CPU_MIPS32_R2
+	.set	mips32r2
+	.set	fp=64
+	mfc0	t0, CP0_STATUS
+	sll	t0, t0, 5
+	bgez	t0, 1f			# skip loading odd if FR=0
+	 nop
+#endif
+	EX	ldc1 $f1, SC_FPREGS+8(a0)
+	EX	ldc1 $f3, SC_FPREGS+24(a0)
+	EX	ldc1 $f5, SC_FPREGS+40(a0)
+	EX	ldc1 $f7, SC_FPREGS+56(a0)
+	EX	ldc1 $f9, SC_FPREGS+72(a0)
+	EX	ldc1 $f11, SC_FPREGS+88(a0)
+	EX	ldc1 $f13, SC_FPREGS+104(a0)
+	EX	ldc1 $f15, SC_FPREGS+120(a0)
+	EX	ldc1 $f17, SC_FPREGS+136(a0)
+	EX	ldc1 $f19, SC_FPREGS+152(a0)
+	EX	ldc1 $f21, SC_FPREGS+168(a0)
+	EX	ldc1 $f23, SC_FPREGS+184(a0)
+	EX	ldc1 $f25, SC_FPREGS+200(a0)
+	EX	ldc1 $f27, SC_FPREGS+216(a0)
+	EX	ldc1 $f29, SC_FPREGS+232(a0)
+	EX	ldc1 $f31, SC_FPREGS+248(a0)
+1:	.set pop
+#endif
+	.set push
+	SET_HARDFLOAT
+	EX	ldc1 $f0, SC_FPREGS+0(a0)
+	EX	ldc1 $f2, SC_FPREGS+16(a0)
+	EX	ldc1 $f4, SC_FPREGS+32(a0)
+	EX	ldc1 $f6, SC_FPREGS+48(a0)
+	EX	ldc1 $f8, SC_FPREGS+64(a0)
+	EX	ldc1 $f10, SC_FPREGS+80(a0)
+	EX	ldc1 $f12, SC_FPREGS+96(a0)
+	EX	ldc1 $f14, SC_FPREGS+112(a0)
+	EX	ldc1 $f16, SC_FPREGS+128(a0)
+	EX	ldc1 $f18, SC_FPREGS+144(a0)
+	EX	ldc1 $f20, SC_FPREGS+160(a0)
+	EX	ldc1 $f22, SC_FPREGS+176(a0)
+	EX	ldc1 $f24, SC_FPREGS+192(a0)
+	EX	ldc1 $f26, SC_FPREGS+208(a0)
+	EX	ldc1 $f28, SC_FPREGS+224(a0)
+	EX	ldc1 $f30, SC_FPREGS+240(a0)
+	ctc1	t1, fcr31
+	.set pop
+	jr	ra
+	 li	v0, 0					# success
+	END(_restore_fp_context)
+
+#ifdef CONFIG_MIPS32_COMPAT
+LEAF(_restore_fp_context32)
+	/* Restore an o32 sigcontext.  */
+	.set push
+	SET_HARDFLOAT
+	EX	lw t1, SC32_FPC_CSR(a0)
+
+#ifndef CONFIG_CPU_MIPS64_R6
+	mfc0	t0, CP0_STATUS
+	sll	t0, t0, 5
+	bgez	t0, 1f			# skip loading odd if FR=0
+	 nop
+#endif
+
+	EX      ldc1 $f1, SC32_FPREGS+8(a0)
+	EX      ldc1 $f3, SC32_FPREGS+24(a0)
+	EX      ldc1 $f5, SC32_FPREGS+40(a0)
+	EX      ldc1 $f7, SC32_FPREGS+56(a0)
+	EX      ldc1 $f9, SC32_FPREGS+72(a0)
+	EX      ldc1 $f11, SC32_FPREGS+88(a0)
+	EX      ldc1 $f13, SC32_FPREGS+104(a0)
+	EX      ldc1 $f15, SC32_FPREGS+120(a0)
+	EX      ldc1 $f17, SC32_FPREGS+136(a0)
+	EX      ldc1 $f19, SC32_FPREGS+152(a0)
+	EX      ldc1 $f21, SC32_FPREGS+168(a0)
+	EX      ldc1 $f23, SC32_FPREGS+184(a0)
+	EX      ldc1 $f25, SC32_FPREGS+200(a0)
+	EX      ldc1 $f27, SC32_FPREGS+216(a0)
+	EX      ldc1 $f29, SC32_FPREGS+232(a0)
+	EX      ldc1 $f31, SC32_FPREGS+248(a0)
+
+1:	EX	ldc1 $f0, SC32_FPREGS+0(a0)
+	EX	ldc1 $f2, SC32_FPREGS+16(a0)
+	EX	ldc1 $f4, SC32_FPREGS+32(a0)
+	EX	ldc1 $f6, SC32_FPREGS+48(a0)
+	EX	ldc1 $f8, SC32_FPREGS+64(a0)
+	EX	ldc1 $f10, SC32_FPREGS+80(a0)
+	EX	ldc1 $f12, SC32_FPREGS+96(a0)
+	EX	ldc1 $f14, SC32_FPREGS+112(a0)
+	EX	ldc1 $f16, SC32_FPREGS+128(a0)
+	EX	ldc1 $f18, SC32_FPREGS+144(a0)
+	EX	ldc1 $f20, SC32_FPREGS+160(a0)
+	EX	ldc1 $f22, SC32_FPREGS+176(a0)
+	EX	ldc1 $f24, SC32_FPREGS+192(a0)
+	EX	ldc1 $f26, SC32_FPREGS+208(a0)
+	EX	ldc1 $f28, SC32_FPREGS+224(a0)
+	EX	ldc1 $f30, SC32_FPREGS+240(a0)
+	ctc1	t1, fcr31
+	jr	ra
+	 li	v0, 0					# success
+	.set pop
+	END(_restore_fp_context32)
+#endif
+
+	.set	reorder
+
+	.type	fault@function
+	.ent	fault
+fault:	li	v0, -EFAULT				# failure
+	jr	ra
+	.end	fault
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
new file mode 100644
index 000000000..04cbbde35
--- /dev/null
+++ b/arch/mips/kernel/r4k_switch.S
@@ -0,0 +1,305 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1998, 1999, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1994, 1995, 1996, by Andreas Busse
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ *    written by Carsten Langgaard, carstenl@mips.com
+ */
+#include <asm/asm.h>
+#include <asm/cachectl.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+#include <asm/asm-offsets.h>
+#include <asm/pgtable-bits.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/thread_info.h>
+
+#include <asm/asmmacro.h>
+
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
+/*
+ * Offset to the current process status flags, the first 32 bytes of the
+ * stack are not used.
+ */
+#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
+
+#ifndef USE_ALTERNATE_RESUME_IMPL
+/*
+ * task_struct *resume(task_struct *prev, task_struct *next,
+ *		       struct thread_info *next_ti, s32 fp_save)
+ */
+	.align	5
+	LEAF(resume)
+	mfc0	t1, CP0_STATUS
+	LONG_S	t1, THREAD_STATUS(a0)
+	cpu_save_nonscratch a0
+	LONG_S	ra, THREAD_REG31(a0)
+
+	/*
+	 * Check whether we need to save any FP context. FP context is saved
+	 * iff the process has used the context with the scalar FPU or the MSA
+	 * ASE in the current time slice, as indicated by _TIF_USEDFPU and
+	 * _TIF_USEDMSA respectively. switch_to will have set fp_save
+	 * accordingly to an FP_SAVE_ enum value.
+	 */
+	beqz	a3, 2f
+
+	/*
+	 * We do. Clear the saved CU1 bit for prev, such that next time it is
+	 * scheduled it will start in userland with the FPU disabled. If the
+	 * task uses the FPU then it will be enabled again via the do_cpu trap.
+	 * This allows us to lazily restore the FP context.
+	 */
+	PTR_L	t3, TASK_THREAD_INFO(a0)
+	LONG_L	t0, ST_OFF(t3)
+	li	t1, ~ST0_CU1
+	and	t0, t0, t1
+	LONG_S	t0, ST_OFF(t3)
+
+	/* Check whether we're saving scalar or vector context. */
+	bgtz	a3, 1f
+
+	/* Save 128b MSA vector context + scalar FP control & status. */
+	.set push
+	SET_HARDFLOAT
+	cfc1	t1, fcr31
+	msa_save_all	a0
+	.set pop	/* SET_HARDFLOAT */
+
+	sw	t1, THREAD_FCR31(a0)
+	b	2f
+
+1:	/* Save 32b/64b scalar FP context. */
+	fpu_save_double a0 t0 t1		# c0_status passed in t0
+						# clobbers t1
+2:
+
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	PTR_LA	t8, __stack_chk_guard
+	LONG_L	t9, TASK_STACK_CANARY(a1)
+	LONG_S	t9, 0(t8)
+#endif
+
+	/*
+	 * The order of restoring the registers takes care of the race
+	 * updating $28, $29 and kernelsp without disabling ints.
+	 */
+	move	$28, a2
+	cpu_restore_nonscratch a1
+
+	PTR_ADDU	t0, $28, _THREAD_SIZE - 32
+	set_saved_sp	t0, t1, t2
+	mfc0	t1, CP0_STATUS		/* Do we really need this? */
+	li	a3, 0xff01
+	and	t1, a3
+	LONG_L	a2, THREAD_STATUS(a1)
+	nor	a3, $0, a3
+	and	a2, a3
+	or	a2, t1
+	mtc0	a2, CP0_STATUS
+	move	v0, a0
+	jr	ra
+	END(resume)
+
+#endif /* USE_ALTERNATE_RESUME_IMPL */
+
+/*
+ * Save a thread's fp context.
+ */
+LEAF(_save_fp)
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
+		defined(CONFIG_CPU_MIPS32_R6)
+	mfc0	t0, CP0_STATUS
+#endif
+	fpu_save_double a0 t0 t1		# clobbers t1
+	jr	ra
+	END(_save_fp)
+
+/*
+ * Restore a thread's fp context.
+ */
+LEAF(_restore_fp)
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
+		defined(CONFIG_CPU_MIPS32_R6)
+	mfc0	t0, CP0_STATUS
+#endif
+	fpu_restore_double a0 t0 t1		# clobbers t1
+	jr	ra
+	END(_restore_fp)
+
+#ifdef CONFIG_CPU_HAS_MSA
+
+/*
+ * Save a thread's MSA vector context.
+ */
+LEAF(_save_msa)
+	msa_save_all	a0
+	jr	ra
+	END(_save_msa)
+
+/*
+ * Restore a thread's MSA vector context.
+ */
+LEAF(_restore_msa)
+	msa_restore_all	a0
+	jr	ra
+	END(_restore_msa)
+
+LEAF(_init_msa_upper)
+	msa_init_all_upper
+	jr	ra
+	END(_init_msa_upper)
+
+#endif
+
+/*
+ * Load the FPU with signalling NANS.  This bit pattern we're using has
+ * the property that no matter whether considered as single or as double
+ * precision represents signaling NANS.
+ *
+ * The value to initialize fcr31 to comes in $a0.
+ */
+
+	.set push
+	SET_HARDFLOAT
+
+LEAF(_init_fpu)
+	mfc0	t0, CP0_STATUS
+	li	t1, ST0_CU1
+	or	t0, t1
+	mtc0	t0, CP0_STATUS
+	enable_fpu_hazard
+
+	ctc1	a0, fcr31
+
+	li	t1, -1				# SNaN
+
+#ifdef CONFIG_64BIT
+	sll	t0, t0, 5
+	bgez	t0, 1f				# 16 / 32 register mode?
+
+	dmtc1	t1, $f1
+	dmtc1	t1, $f3
+	dmtc1	t1, $f5
+	dmtc1	t1, $f7
+	dmtc1	t1, $f9
+	dmtc1	t1, $f11
+	dmtc1	t1, $f13
+	dmtc1	t1, $f15
+	dmtc1	t1, $f17
+	dmtc1	t1, $f19
+	dmtc1	t1, $f21
+	dmtc1	t1, $f23
+	dmtc1	t1, $f25
+	dmtc1	t1, $f27
+	dmtc1	t1, $f29
+	dmtc1	t1, $f31
+1:
+#endif
+
+#ifdef CONFIG_CPU_MIPS32
+	mtc1	t1, $f0
+	mtc1	t1, $f1
+	mtc1	t1, $f2
+	mtc1	t1, $f3
+	mtc1	t1, $f4
+	mtc1	t1, $f5
+	mtc1	t1, $f6
+	mtc1	t1, $f7
+	mtc1	t1, $f8
+	mtc1	t1, $f9
+	mtc1	t1, $f10
+	mtc1	t1, $f11
+	mtc1	t1, $f12
+	mtc1	t1, $f13
+	mtc1	t1, $f14
+	mtc1	t1, $f15
+	mtc1	t1, $f16
+	mtc1	t1, $f17
+	mtc1	t1, $f18
+	mtc1	t1, $f19
+	mtc1	t1, $f20
+	mtc1	t1, $f21
+	mtc1	t1, $f22
+	mtc1	t1, $f23
+	mtc1	t1, $f24
+	mtc1	t1, $f25
+	mtc1	t1, $f26
+	mtc1	t1, $f27
+	mtc1	t1, $f28
+	mtc1	t1, $f29
+	mtc1	t1, $f30
+	mtc1	t1, $f31
+
+#if defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_CPU_MIPS32_R6)
+	.set    push
+	.set    MIPS_ISA_LEVEL_RAW
+	.set	fp=64
+	sll     t0, t0, 5			# is Status.FR set?
+	bgez    t0, 1f				# no: skip setting upper 32b
+
+	mthc1   t1, $f0
+	mthc1   t1, $f1
+	mthc1   t1, $f2
+	mthc1   t1, $f3
+	mthc1   t1, $f4
+	mthc1   t1, $f5
+	mthc1   t1, $f6
+	mthc1   t1, $f7
+	mthc1   t1, $f8
+	mthc1   t1, $f9
+	mthc1   t1, $f10
+	mthc1   t1, $f11
+	mthc1   t1, $f12
+	mthc1   t1, $f13
+	mthc1   t1, $f14
+	mthc1   t1, $f15
+	mthc1   t1, $f16
+	mthc1   t1, $f17
+	mthc1   t1, $f18
+	mthc1   t1, $f19
+	mthc1   t1, $f20
+	mthc1   t1, $f21
+	mthc1   t1, $f22
+	mthc1   t1, $f23
+	mthc1   t1, $f24
+	mthc1   t1, $f25
+	mthc1   t1, $f26
+	mthc1   t1, $f27
+	mthc1   t1, $f28
+	mthc1   t1, $f29
+	mthc1   t1, $f30
+	mthc1   t1, $f31
+1:	.set    pop
+#endif /* CONFIG_CPU_MIPS32_R2 || CONFIG_CPU_MIPS32_R6 */
+#else
+	.set	MIPS_ISA_ARCH_LEVEL_RAW
+	dmtc1	t1, $f0
+	dmtc1	t1, $f2
+	dmtc1	t1, $f4
+	dmtc1	t1, $f6
+	dmtc1	t1, $f8
+	dmtc1	t1, $f10
+	dmtc1	t1, $f12
+	dmtc1	t1, $f14
+	dmtc1	t1, $f16
+	dmtc1	t1, $f18
+	dmtc1	t1, $f20
+	dmtc1	t1, $f22
+	dmtc1	t1, $f24
+	dmtc1	t1, $f26
+	dmtc1	t1, $f28
+	dmtc1	t1, $f30
+#endif
+	jr	ra
+	END(_init_fpu)
+
+	.set pop	/* SET_HARDFLOAT */
diff --git a/arch/mips/kernel/r6000_fpu.S b/arch/mips/kernel/r6000_fpu.S
new file mode 100644
index 000000000..47077380c
--- /dev/null
+++ b/arch/mips/kernel/r6000_fpu.S
@@ -0,0 +1,92 @@
+/*
+ * r6000_fpu.S: Save/restore floating point context for signal handlers.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996 by Ralf Baechle
+ *
+ * Multi-arch abstraction and asm macros for easier reading:
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ */
+#include <asm/asm.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+
+	.set	noreorder
+	.set	mips2
+	.set	push
+	SET_HARDFLOAT
+
+	/* Save floating point context */
+	LEAF(_save_fp_context)
+	mfc0	t0,CP0_STATUS
+	sll	t0,t0,2
+	bgez	t0,1f
+	 nop
+
+	cfc1	t1,fcr31
+	/* Store the 16 double precision registers */
+	sdc1	$f0,(SC_FPREGS+0)(a0)
+	sdc1	$f2,(SC_FPREGS+16)(a0)
+	sdc1	$f4,(SC_FPREGS+32)(a0)
+	sdc1	$f6,(SC_FPREGS+48)(a0)
+	sdc1	$f8,(SC_FPREGS+64)(a0)
+	sdc1	$f10,(SC_FPREGS+80)(a0)
+	sdc1	$f12,(SC_FPREGS+96)(a0)
+	sdc1	$f14,(SC_FPREGS+112)(a0)
+	sdc1	$f16,(SC_FPREGS+128)(a0)
+	sdc1	$f18,(SC_FPREGS+144)(a0)
+	sdc1	$f20,(SC_FPREGS+160)(a0)
+	sdc1	$f22,(SC_FPREGS+176)(a0)
+	sdc1	$f24,(SC_FPREGS+192)(a0)
+	sdc1	$f26,(SC_FPREGS+208)(a0)
+	sdc1	$f28,(SC_FPREGS+224)(a0)
+	sdc1	$f30,(SC_FPREGS+240)(a0)
+	jr	ra
+	 sw	t0,SC_FPC_CSR(a0)
+1:	jr	ra
+	 nop
+	END(_save_fp_context)
+
+/* Restore FPU state:
+ *  - fp gp registers
+ *  - cp1 status/control register
+ *
+ * We base the decision which registers to restore from the signal stack
+ * frame on the current content of c0_status, not on the content of the
+ * stack frame which might have been changed by the user.
+ */
+	LEAF(_restore_fp_context)
+	mfc0	t0,CP0_STATUS
+	sll	t0,t0,2
+
+	bgez	t0,1f
+	 lw	t0,SC_FPC_CSR(a0)
+	/* Restore the 16 double precision registers */
+	ldc1	$f0,(SC_FPREGS+0)(a0)
+	ldc1	$f2,(SC_FPREGS+16)(a0)
+	ldc1	$f4,(SC_FPREGS+32)(a0)
+	ldc1	$f6,(SC_FPREGS+48)(a0)
+	ldc1	$f8,(SC_FPREGS+64)(a0)
+	ldc1	$f10,(SC_FPREGS+80)(a0)
+	ldc1	$f12,(SC_FPREGS+96)(a0)
+	ldc1	$f14,(SC_FPREGS+112)(a0)
+	ldc1	$f16,(SC_FPREGS+128)(a0)
+	ldc1	$f18,(SC_FPREGS+144)(a0)
+	ldc1	$f20,(SC_FPREGS+160)(a0)
+	ldc1	$f22,(SC_FPREGS+176)(a0)
+	ldc1	$f24,(SC_FPREGS+192)(a0)
+	ldc1	$f26,(SC_FPREGS+208)(a0)
+	ldc1	$f28,(SC_FPREGS+224)(a0)
+	ldc1	$f30,(SC_FPREGS+240)(a0)
+	jr	ra
+	 ctc1	t0,fcr31
+1:	jr	ra
+	 nop
+	END(_restore_fp_context)
+
+	.set pop	/* SET_HARDFLOAT */
diff --git a/arch/mips/kernel/relocate_kernel.S b/arch/mips/kernel/relocate_kernel.S
new file mode 100644
index 000000000..74bab9ddd
--- /dev/null
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -0,0 +1,192 @@
+/*
+ * relocate_kernel.S for kexec
+ * Created by <nschichan@corp.free.fr> on Thu Oct 12 17:49:57 2006
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+#include <asm/addrspace.h>
+
+LEAF(relocate_new_kernel)
+	PTR_L a0,	arg0
+	PTR_L a1,	arg1
+	PTR_L a2,	arg2
+	PTR_L a3,	arg3
+
+	PTR_L		s0, kexec_indirection_page
+	PTR_L		s1, kexec_start_address
+
+process_entry:
+	PTR_L		s2, (s0)
+	PTR_ADD		s0, s0, SZREG
+
+	/*
+	 * In case of a kdump/crash kernel, the indirection page is not
+	 * populated as the kernel is directly copied to a reserved location
+	 */
+	beqz		s2, done
+
+	/* destination page */
+	and		s3, s2, 0x1
+	beq		s3, zero, 1f
+	and		s4, s2, ~0x1	/* store destination addr in s4 */
+	b		process_entry
+
+1:
+	/* indirection page, update s0	*/
+	and		s3, s2, 0x2
+	beq		s3, zero, 1f
+	and		s0, s2, ~0x2
+	b		process_entry
+
+1:
+	/* done page */
+	and		s3, s2, 0x4
+	beq		s3, zero, 1f
+	b		done
+1:
+	/* source page */
+	and		s3, s2, 0x8
+	beq		s3, zero, process_entry
+	and		s2, s2, ~0x8
+	li		s6, (1 << _PAGE_SHIFT) / SZREG
+
+copy_word:
+	/* copy page word by word */
+	REG_L		s5, (s2)
+	REG_S		s5, (s4)
+	PTR_ADD		s4, s4, SZREG
+	PTR_ADD		s2, s2, SZREG
+	LONG_SUB	s6, s6, 1
+	beq		s6, zero, process_entry
+	b		copy_word
+	b		process_entry
+
+done:
+#ifdef CONFIG_SMP
+	/* kexec_flag reset is signal to other CPUs what kernel
+	   was moved to it's location. Note - we need relocated address
+	   of kexec_flag.  */
+
+	bal		1f
+ 1:	move		t1,ra;
+	PTR_LA		t2,1b
+	PTR_LA		t0,kexec_flag
+	PTR_SUB		t0,t0,t2;
+	PTR_ADD		t0,t1,t0;
+	LONG_S		zero,(t0)
+#endif
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	/* We need to flush I-cache before jumping to new kernel.
+	 * Unfortunatelly, this code is cpu-specific.
+	 */
+	.set push
+	.set noreorder
+	syncw
+	syncw
+	synci		0($0)
+	.set pop
+#else
+	sync
+#endif
+	/* jump to kexec_start_address */
+	j		s1
+	END(relocate_new_kernel)
+
+#ifdef CONFIG_SMP
+/*
+ * Other CPUs should wait until code is relocated and
+ * then start at entry (?) point.
+ */
+LEAF(kexec_smp_wait)
+	PTR_L		a0, s_arg0
+	PTR_L		a1, s_arg1
+	PTR_L		a2, s_arg2
+	PTR_L		a3, s_arg3
+	PTR_L		s1, kexec_start_address
+
+	/* Non-relocated address works for args and kexec_start_address ( old
+	 * kernel is not overwritten). But we need relocated address of
+	 * kexec_flag.
+	 */
+
+	bal		1f
+1:	move		t1,ra;
+	PTR_LA		t2,1b
+	PTR_LA		t0,kexec_flag
+	PTR_SUB		t0,t0,t2;
+	PTR_ADD		t0,t1,t0;
+
+1:	LONG_L		s0, (t0)
+	bne		s0, zero,1b
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	.set push
+	.set noreorder
+	synci		0($0)
+	.set pop
+#else
+	sync
+#endif
+	j		s1
+	END(kexec_smp_wait)
+#endif
+
+#ifdef __mips64
+       /* all PTR's must be aligned to 8 byte in 64-bit mode */
+       .align  3
+#endif
+
+/* All parameters to new kernel are passed in registers a0-a3.
+ * kexec_args[0..3] are uses to prepare register values.
+ */
+
+kexec_args:
+	EXPORT(kexec_args)
+arg0:	PTR		0x0
+arg1:	PTR		0x0
+arg2:	PTR		0x0
+arg3:	PTR		0x0
+	.size	kexec_args,PTRSIZE*4
+
+#ifdef CONFIG_SMP
+/*
+ * Secondary CPUs may have different kernel parameters in
+ * their registers a0-a3. secondary_kexec_args[0..3] are used
+ * to prepare register values.
+ */
+secondary_kexec_args:
+	EXPORT(secondary_kexec_args)
+s_arg0: PTR		0x0
+s_arg1: PTR		0x0
+s_arg2: PTR		0x0
+s_arg3: PTR		0x0
+	.size	secondary_kexec_args,PTRSIZE*4
+kexec_flag:
+	LONG		0x1
+
+#endif
+
+kexec_start_address:
+	EXPORT(kexec_start_address)
+	PTR		0x0
+	.size		kexec_start_address, PTRSIZE
+
+kexec_indirection_page:
+	EXPORT(kexec_indirection_page)
+	PTR		0
+	.size		kexec_indirection_page, PTRSIZE
+
+relocate_new_kernel_end:
+
+relocate_new_kernel_size:
+	EXPORT(relocate_new_kernel_size)
+	PTR		relocate_new_kernel_end - relocate_new_kernel
+	.size		relocate_new_kernel_size, PTRSIZE
diff --git a/arch/mips/kernel/reset.c b/arch/mips/kernel/reset.c
new file mode 100644
index 000000000..7c746d345
--- /dev/null
+++ b/arch/mips/kernel/reset.c
@@ -0,0 +1,69 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001, 06 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+
+#include <asm/reboot.h>
+
+/*
+ * Urgs ...  Too many MIPS machines to handle this in a generic way.
+ * So handle all using function pointers to machine specific
+ * functions.
+ */
+void (*_machine_restart)(char *command);
+void (*_machine_halt)(void);
+void (*pm_power_off)(void);
+
+EXPORT_SYMBOL(pm_power_off);
+
+void machine_restart(char *command)
+{
+	if (_machine_restart)
+		_machine_restart(command);
+
+#ifdef CONFIG_SMP
+	preempt_disable();
+	smp_send_stop();
+#endif
+	do_kernel_restart(command);
+	mdelay(1000);
+	pr_emerg("Reboot failed -- System halted\n");
+	local_irq_disable();
+	while (1);
+}
+
+void machine_halt(void)
+{
+	if (_machine_halt)
+		_machine_halt();
+
+#ifdef CONFIG_SMP
+	preempt_disable();
+	smp_send_stop();
+#endif
+	local_irq_disable();
+	while (1);
+}
+
+void machine_power_off(void)
+{
+	if (pm_power_off)
+		pm_power_off();
+
+#ifdef CONFIG_SMP
+	preempt_disable();
+	smp_send_stop();
+#endif
+	local_irq_disable();
+	while (1);
+}
diff --git a/arch/mips/kernel/rtlx-cmp.c b/arch/mips/kernel/rtlx-cmp.c
new file mode 100644
index 000000000..d26dcc4b4
--- /dev/null
+++ b/arch/mips/kernel/rtlx-cmp.c
@@ -0,0 +1,122 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ */
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+
+#include <asm/mips_mt.h>
+#include <asm/vpe.h>
+#include <asm/rtlx.h>
+
+static int major;
+
+static void rtlx_interrupt(void)
+{
+	int i;
+	struct rtlx_info *info;
+	struct rtlx_info **p = vpe_get_shared(aprp_cpu_index());
+
+	if (p == NULL || *p == NULL)
+		return;
+
+	info = *p;
+
+	if (info->ap_int_pending == 1 && smp_processor_id() == 0) {
+		for (i = 0; i < RTLX_CHANNELS; i++) {
+			wake_up(&channel_wqs[i].lx_queue);
+			wake_up(&channel_wqs[i].rt_queue);
+		}
+		info->ap_int_pending = 0;
+	}
+}
+
+void _interrupt_sp(void)
+{
+	smp_send_reschedule(aprp_cpu_index());
+}
+
+int __init rtlx_module_init(void)
+{
+	struct device *dev;
+	int i, err;
+
+	if (!cpu_has_mipsmt) {
+		pr_warn("VPE loader: not a MIPS MT capable processor\n");
+		return -ENODEV;
+	}
+
+	if (num_possible_cpus() - aprp_cpu_index() < 1) {
+		pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n"
+			"Pass maxcpus=<n> argument as kernel argument\n");
+
+		return -ENODEV;
+	}
+
+	major = register_chrdev(0, RTLX_MODULE_NAME, &rtlx_fops);
+	if (major < 0) {
+		pr_err("rtlx_module_init: unable to register device\n");
+		return major;
+	}
+
+	/* initialise the wait queues */
+	for (i = 0; i < RTLX_CHANNELS; i++) {
+		init_waitqueue_head(&channel_wqs[i].rt_queue);
+		init_waitqueue_head(&channel_wqs[i].lx_queue);
+		atomic_set(&channel_wqs[i].in_open, 0);
+		mutex_init(&channel_wqs[i].mutex);
+
+		dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
+				    "%s%d", RTLX_MODULE_NAME, i);
+		if (IS_ERR(dev)) {
+			while (i--)
+				device_destroy(mt_class, MKDEV(major, i));
+
+			err = PTR_ERR(dev);
+			goto out_chrdev;
+		}
+	}
+
+	/* set up notifiers */
+	rtlx_notify.start = rtlx_starting;
+	rtlx_notify.stop = rtlx_stopping;
+	vpe_notify(aprp_cpu_index(), &rtlx_notify);
+
+	if (cpu_has_vint) {
+		aprp_hook = rtlx_interrupt;
+	} else {
+		pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
+		err = -ENODEV;
+		goto out_class;
+	}
+
+	return 0;
+
+out_class:
+	for (i = 0; i < RTLX_CHANNELS; i++)
+		device_destroy(mt_class, MKDEV(major, i));
+out_chrdev:
+	unregister_chrdev(major, RTLX_MODULE_NAME);
+
+	return err;
+}
+
+void __exit rtlx_module_exit(void)
+{
+	int i;
+
+	for (i = 0; i < RTLX_CHANNELS; i++)
+		device_destroy(mt_class, MKDEV(major, i));
+
+	unregister_chrdev(major, RTLX_MODULE_NAME);
+
+	aprp_hook = NULL;
+}
diff --git a/arch/mips/kernel/rtlx-mt.c b/arch/mips/kernel/rtlx-mt.c
new file mode 100644
index 000000000..cb95470e2
--- /dev/null
+++ b/arch/mips/kernel/rtlx-mt.c
@@ -0,0 +1,153 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ */
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/mips_mt.h>
+#include <asm/vpe.h>
+#include <asm/rtlx.h>
+
+static int major;
+
+static void rtlx_dispatch(void)
+{
+	if (read_c0_cause() & read_c0_status() & C_SW0)
+		do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ);
+}
+
+/*
+ * Interrupt handler may be called before rtlx_init has otherwise had
+ * a chance to run.
+ */
+static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
+{
+	unsigned int vpeflags;
+	unsigned long flags;
+	int i;
+
+	local_irq_save(flags);
+	vpeflags = dvpe();
+	set_c0_status(0x100 << MIPS_CPU_RTLX_IRQ);
+	irq_enable_hazard();
+	evpe(vpeflags);
+	local_irq_restore(flags);
+
+	for (i = 0; i < RTLX_CHANNELS; i++) {
+		wake_up(&channel_wqs[i].lx_queue);
+		wake_up(&channel_wqs[i].rt_queue);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction rtlx_irq = {
+	.handler	= rtlx_interrupt,
+	.name		= "RTLX",
+};
+
+static int rtlx_irq_num = MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ;
+
+void _interrupt_sp(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	dvpe();
+	settc(1);
+	write_vpe_c0_cause(read_vpe_c0_cause() | C_SW0);
+	evpe(EVPE_ENABLE);
+	local_irq_restore(flags);
+}
+
+int __init rtlx_module_init(void)
+{
+	struct device *dev;
+	int i, err;
+
+	if (!cpu_has_mipsmt) {
+		pr_warn("VPE loader: not a MIPS MT capable processor\n");
+		return -ENODEV;
+	}
+
+	if (aprp_cpu_index() == 0) {
+		pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n"
+			"Pass maxtcs=<n> argument as kernel argument\n");
+
+		return -ENODEV;
+	}
+
+	major = register_chrdev(0, RTLX_MODULE_NAME, &rtlx_fops);
+	if (major < 0) {
+		pr_err("rtlx_module_init: unable to register device\n");
+		return major;
+	}
+
+	/* initialise the wait queues */
+	for (i = 0; i < RTLX_CHANNELS; i++) {
+		init_waitqueue_head(&channel_wqs[i].rt_queue);
+		init_waitqueue_head(&channel_wqs[i].lx_queue);
+		atomic_set(&channel_wqs[i].in_open, 0);
+		mutex_init(&channel_wqs[i].mutex);
+
+		dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
+				    "%s%d", RTLX_MODULE_NAME, i);
+		if (IS_ERR(dev)) {
+			while (i--)
+				device_destroy(mt_class, MKDEV(major, i));
+
+			err = PTR_ERR(dev);
+			goto out_chrdev;
+		}
+	}
+
+	/* set up notifiers */
+	rtlx_notify.start = rtlx_starting;
+	rtlx_notify.stop = rtlx_stopping;
+	vpe_notify(aprp_cpu_index(), &rtlx_notify);
+
+	if (cpu_has_vint) {
+		aprp_hook = rtlx_dispatch;
+	} else {
+		pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
+		err = -ENODEV;
+		goto out_class;
+	}
+
+	rtlx_irq.dev_id = rtlx;
+	err = setup_irq(rtlx_irq_num, &rtlx_irq);
+	if (err)
+		goto out_class;
+
+	return 0;
+
+out_class:
+	for (i = 0; i < RTLX_CHANNELS; i++)
+		device_destroy(mt_class, MKDEV(major, i));
+out_chrdev:
+	unregister_chrdev(major, RTLX_MODULE_NAME);
+
+	return err;
+}
+
+void __exit rtlx_module_exit(void)
+{
+	int i;
+
+	for (i = 0; i < RTLX_CHANNELS; i++)
+		device_destroy(mt_class, MKDEV(major, i));
+
+	unregister_chrdev(major, RTLX_MODULE_NAME);
+
+	aprp_hook = NULL;
+}
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
new file mode 100644
index 000000000..c5c4fd54d
--- /dev/null
+++ b/arch/mips/kernel/rtlx.c
@@ -0,0 +1,407 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2005, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ */
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
+#include <linux/atomic.h>
+#include <asm/mipsmtregs.h>
+#include <asm/mips_mt.h>
+#include <asm/processor.h>
+#include <asm/rtlx.h>
+#include <asm/setup.h>
+#include <asm/vpe.h>
+
+static int sp_stopping;
+struct rtlx_info *rtlx;
+struct chan_waitqueues channel_wqs[RTLX_CHANNELS];
+struct vpe_notifications rtlx_notify;
+void (*aprp_hook)(void) = NULL;
+EXPORT_SYMBOL(aprp_hook);
+
+static void __used dump_rtlx(void)
+{
+	int i;
+
+	pr_info("id 0x%lx state %d\n", rtlx->id, rtlx->state);
+
+	for (i = 0; i < RTLX_CHANNELS; i++) {
+		struct rtlx_channel *chan = &rtlx->channel[i];
+
+		pr_info(" rt_state %d lx_state %d buffer_size %d\n",
+			chan->rt_state, chan->lx_state, chan->buffer_size);
+
+		pr_info(" rt_read %d rt_write %d\n",
+			chan->rt_read, chan->rt_write);
+
+		pr_info(" lx_read %d lx_write %d\n",
+			chan->lx_read, chan->lx_write);
+
+		pr_info(" rt_buffer <%s>\n", chan->rt_buffer);
+		pr_info(" lx_buffer <%s>\n", chan->lx_buffer);
+	}
+}
+
+/* call when we have the address of the shared structure from the SP side. */
+static int rtlx_init(struct rtlx_info *rtlxi)
+{
+	if (rtlxi->id != RTLX_ID) {
+		pr_err("no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id);
+		return -ENOEXEC;
+	}
+
+	rtlx = rtlxi;
+
+	return 0;
+}
+
+/* notifications */
+void rtlx_starting(int vpe)
+{
+	int i;
+	sp_stopping = 0;
+
+	/* force a reload of rtlx */
+	rtlx = NULL;
+
+	/* wake up any sleeping rtlx_open's */
+	for (i = 0; i < RTLX_CHANNELS; i++)
+		wake_up_interruptible(&channel_wqs[i].lx_queue);
+}
+
+void rtlx_stopping(int vpe)
+{
+	int i;
+
+	sp_stopping = 1;
+	for (i = 0; i < RTLX_CHANNELS; i++)
+		wake_up_interruptible(&channel_wqs[i].lx_queue);
+}
+
+
+int rtlx_open(int index, int can_sleep)
+{
+	struct rtlx_info **p;
+	struct rtlx_channel *chan;
+	enum rtlx_state state;
+	int ret = 0;
+
+	if (index >= RTLX_CHANNELS) {
+		pr_debug("rtlx_open index out of range\n");
+		return -ENOSYS;
+	}
+
+	if (atomic_inc_return(&channel_wqs[index].in_open) > 1) {
+		pr_debug("rtlx_open channel %d already opened\n", index);
+		ret = -EBUSY;
+		goto out_fail;
+	}
+
+	if (rtlx == NULL) {
+		p = vpe_get_shared(aprp_cpu_index());
+		if (p == NULL) {
+			if (can_sleep) {
+				ret = __wait_event_interruptible(
+					channel_wqs[index].lx_queue,
+					(p = vpe_get_shared(aprp_cpu_index())));
+				if (ret)
+					goto out_fail;
+			} else {
+				pr_debug("No SP program loaded, and device opened with O_NONBLOCK\n");
+				ret = -ENOSYS;
+				goto out_fail;
+			}
+		}
+
+		smp_rmb();
+		if (*p == NULL) {
+			if (can_sleep) {
+				DEFINE_WAIT(wait);
+
+				for (;;) {
+					prepare_to_wait(
+						&channel_wqs[index].lx_queue,
+						&wait, TASK_INTERRUPTIBLE);
+					smp_rmb();
+					if (*p != NULL)
+						break;
+					if (!signal_pending(current)) {
+						schedule();
+						continue;
+					}
+					ret = -ERESTARTSYS;
+					goto out_fail;
+				}
+				finish_wait(&channel_wqs[index].lx_queue,
+					    &wait);
+			} else {
+				pr_err(" *vpe_get_shared is NULL. Has an SP program been loaded?\n");
+				ret = -ENOSYS;
+				goto out_fail;
+			}
+		}
+
+		if ((unsigned int)*p < KSEG0) {
+			pr_warn("vpe_get_shared returned an invalid pointer maybe an error code %d\n",
+				(int)*p);
+			ret = -ENOSYS;
+			goto out_fail;
+		}
+
+		ret = rtlx_init(*p);
+		if (ret < 0)
+			goto out_ret;
+	}
+
+	chan = &rtlx->channel[index];
+
+	state = xchg(&chan->lx_state, RTLX_STATE_OPENED);
+	if (state == RTLX_STATE_OPENED) {
+		ret = -EBUSY;
+		goto out_fail;
+	}
+
+out_fail:
+	smp_mb();
+	atomic_dec(&channel_wqs[index].in_open);
+	smp_mb();
+
+out_ret:
+	return ret;
+}
+
+int rtlx_release(int index)
+{
+	if (rtlx == NULL) {
+		pr_err("rtlx_release() with null rtlx\n");
+		return 0;
+	}
+	rtlx->channel[index].lx_state = RTLX_STATE_UNUSED;
+	return 0;
+}
+
+unsigned int rtlx_read_poll(int index, int can_sleep)
+{
+	struct rtlx_channel *chan;
+
+	if (rtlx == NULL)
+		return 0;
+
+	chan = &rtlx->channel[index];
+
+	/* data available to read? */
+	if (chan->lx_read == chan->lx_write) {
+		if (can_sleep) {
+			int ret = __wait_event_interruptible(
+				channel_wqs[index].lx_queue,
+				(chan->lx_read != chan->lx_write) ||
+				sp_stopping);
+			if (ret)
+				return ret;
+
+			if (sp_stopping)
+				return 0;
+		} else
+			return 0;
+	}
+
+	return (chan->lx_write + chan->buffer_size - chan->lx_read)
+	       % chan->buffer_size;
+}
+
+static inline int write_spacefree(int read, int write, int size)
+{
+	if (read == write) {
+		/*
+		 * Never fill the buffer completely, so indexes are always
+		 * equal if empty and only empty, or !equal if data available
+		 */
+		return size - 1;
+	}
+
+	return ((read + size - write) % size) - 1;
+}
+
+unsigned int rtlx_write_poll(int index)
+{
+	struct rtlx_channel *chan = &rtlx->channel[index];
+
+	return write_spacefree(chan->rt_read, chan->rt_write,
+				chan->buffer_size);
+}
+
+ssize_t rtlx_read(int index, void __user *buff, size_t count)
+{
+	size_t lx_write, fl = 0L;
+	struct rtlx_channel *lx;
+	unsigned long failed;
+
+	if (rtlx == NULL)
+		return -ENOSYS;
+
+	lx = &rtlx->channel[index];
+
+	mutex_lock(&channel_wqs[index].mutex);
+	smp_rmb();
+	lx_write = lx->lx_write;
+
+	/* find out how much in total */
+	count = min(count,
+		     (size_t)(lx_write + lx->buffer_size - lx->lx_read)
+		     % lx->buffer_size);
+
+	/* then how much from the read pointer onwards */
+	fl = min(count, (size_t)lx->buffer_size - lx->lx_read);
+
+	failed = copy_to_user(buff, lx->lx_buffer + lx->lx_read, fl);
+	if (failed)
+		goto out;
+
+	/* and if there is anything left at the beginning of the buffer */
+	if (count - fl)
+		failed = copy_to_user(buff + fl, lx->lx_buffer, count - fl);
+
+out:
+	count -= failed;
+
+	smp_wmb();
+	lx->lx_read = (lx->lx_read + count) % lx->buffer_size;
+	smp_wmb();
+	mutex_unlock(&channel_wqs[index].mutex);
+
+	return count;
+}
+
+ssize_t rtlx_write(int index, const void __user *buffer, size_t count)
+{
+	struct rtlx_channel *rt;
+	unsigned long failed;
+	size_t rt_read;
+	size_t fl;
+
+	if (rtlx == NULL)
+		return -ENOSYS;
+
+	rt = &rtlx->channel[index];
+
+	mutex_lock(&channel_wqs[index].mutex);
+	smp_rmb();
+	rt_read = rt->rt_read;
+
+	/* total number of bytes to copy */
+	count = min_t(size_t, count, write_spacefree(rt_read, rt->rt_write,
+						     rt->buffer_size));
+
+	/* first bit from write pointer to the end of the buffer, or count */
+	fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
+
+	failed = copy_from_user(rt->rt_buffer + rt->rt_write, buffer, fl);
+	if (failed)
+		goto out;
+
+	/* if there's any left copy to the beginning of the buffer */
+	if (count - fl)
+		failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl);
+
+out:
+	count -= failed;
+
+	smp_wmb();
+	rt->rt_write = (rt->rt_write + count) % rt->buffer_size;
+	smp_wmb();
+	mutex_unlock(&channel_wqs[index].mutex);
+
+	_interrupt_sp();
+
+	return count;
+}
+
+
+static int file_open(struct inode *inode, struct file *filp)
+{
+	return rtlx_open(iminor(inode), (filp->f_flags & O_NONBLOCK) ? 0 : 1);
+}
+
+static int file_release(struct inode *inode, struct file *filp)
+{
+	return rtlx_release(iminor(inode));
+}
+
+static unsigned int file_poll(struct file *file, poll_table *wait)
+{
+	int minor = iminor(file_inode(file));
+	unsigned int mask = 0;
+
+	poll_wait(file, &channel_wqs[minor].rt_queue, wait);
+	poll_wait(file, &channel_wqs[minor].lx_queue, wait);
+
+	if (rtlx == NULL)
+		return 0;
+
+	/* data available to read? */
+	if (rtlx_read_poll(minor, 0))
+		mask |= POLLIN | POLLRDNORM;
+
+	/* space to write */
+	if (rtlx_write_poll(minor))
+		mask |= POLLOUT | POLLWRNORM;
+
+	return mask;
+}
+
+static ssize_t file_read(struct file *file, char __user *buffer, size_t count,
+			 loff_t *ppos)
+{
+	int minor = iminor(file_inode(file));
+
+	/* data available? */
+	if (!rtlx_read_poll(minor, (file->f_flags & O_NONBLOCK) ? 0 : 1))
+		return 0;	/* -EAGAIN makes 'cat' whine */
+
+	return rtlx_read(minor, buffer, count);
+}
+
+static ssize_t file_write(struct file *file, const char __user *buffer,
+			  size_t count, loff_t *ppos)
+{
+	int minor = iminor(file_inode(file));
+
+	/* any space left... */
+	if (!rtlx_write_poll(minor)) {
+		int ret;
+
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		ret = __wait_event_interruptible(channel_wqs[minor].rt_queue,
+					   rtlx_write_poll(minor));
+		if (ret)
+			return ret;
+	}
+
+	return rtlx_write(minor, buffer, count);
+}
+
+const struct file_operations rtlx_fops = {
+	.owner =   THIS_MODULE,
+	.open =    file_open,
+	.release = file_release,
+	.write =   file_write,
+	.read =    file_read,
+	.poll =    file_poll,
+	.llseek =  noop_llseek,
+};
+
+module_init(rtlx_module_init);
+module_exit(rtlx_module_exit);
+
+MODULE_DESCRIPTION("MIPS RTLX");
+MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
new file mode 100644
index 000000000..6e8de80bb
--- /dev/null
+++ b/arch/mips/kernel/scall32-o32.S
@@ -0,0 +1,584 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995-99, 2000- 02, 06 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2004 Thiemo Seufer
+ * Copyright (C) 2014 Imagination Technologies Ltd.
+ */
+#include <linux/errno.h>
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/irqflags.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/isadep.h>
+#include <asm/sysmips.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+#include <asm/war.h>
+#include <asm/asm-offsets.h>
+
+/* Highest syscall used of any syscall flavour */
+#define MAX_SYSCALL_NO	__NR_O32_Linux + __NR_O32_Linux_syscalls
+
+	.align	5
+NESTED(handle_sys, PT_SIZE, sp)
+	.set	noat
+	SAVE_SOME
+	TRACE_IRQS_ON_RELOAD
+	STI
+	.set	at
+
+	lw	t1, PT_EPC(sp)		# skip syscall on return
+
+	subu	v0, v0, __NR_O32_Linux	# check syscall number
+	sltiu	t0, v0, __NR_O32_Linux_syscalls + 1
+	addiu	t1, 4			# skip to next instruction
+	sw	t1, PT_EPC(sp)
+	beqz	t0, illegal_syscall
+
+	sll	t0, v0, 2
+	la	t1, sys_call_table
+	addu	t1, t0
+	lw	t2, (t1)		# syscall routine
+	beqz	t2, illegal_syscall
+
+	sw	a3, PT_R26(sp)		# save a3 for syscall restarting
+
+	/*
+	 * More than four arguments.  Try to deal with it by copying the
+	 * stack arguments from the user stack to the kernel stack.
+	 * This Sucks (TM).
+	 */
+	lw	t0, PT_R29(sp)		# get old user stack pointer
+
+	/*
+	 * We intentionally keep the kernel stack a little below the top of
+	 * userspace so we don't have to do a slower byte accurate check here.
+	 */
+	lw	t5, TI_ADDR_LIMIT($28)
+	addu	t4, t0, 32
+	and	t5, t4
+	bltz	t5, bad_stack		# -> sp is bad
+
+	/*
+	 * Ok, copy the args from the luser stack to the kernel stack.
+	 */
+
+	.set    push
+	.set    noreorder
+	.set	nomacro
+
+1:	user_lw(t5, 16(t0))		# argument #5 from usp
+4:	user_lw(t6, 20(t0))		# argument #6 from usp
+3:	user_lw(t7, 24(t0))		# argument #7 from usp
+2:	user_lw(t8, 28(t0))		# argument #8 from usp
+
+	sw	t5, 16(sp)		# argument #5 to ksp
+	sw	t6, 20(sp)		# argument #6 to ksp
+	sw	t7, 24(sp)		# argument #7 to ksp
+	sw	t8, 28(sp)		# argument #8 to ksp
+	.set	pop
+
+	.section __ex_table,"a"
+	PTR	1b,bad_stack
+	PTR	2b,bad_stack
+	PTR	3b,bad_stack
+	PTR	4b,bad_stack
+	.previous
+
+	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
+	and	t0, t1
+	bnez	t0, syscall_trace_entry # -> yes
+
+	jalr	t2			# Do The Real Thing (TM)
+
+	li	t0, -EMAXERRNO - 1	# error?
+	sltu	t0, t0, v0
+	sw	t0, PT_R7(sp)		# set error flag
+	beqz	t0, 1f
+
+	lw	t1, PT_R2(sp)		# syscall number
+	negu	v0			# error
+	sw	t1, PT_R0(sp)		# save it for syscall restarting
+1:	sw	v0, PT_R2(sp)		# result
+
+o32_syscall_exit:
+	j	syscall_exit_partial
+
+/* ------------------------------------------------------------------------ */
+
+syscall_trace_entry:
+	SAVE_STATIC
+	move	s0, t2
+	move	a0, sp
+
+	/*
+	 * syscall number is in v0 unless we called syscall(__NR_###)
+	 * where the real syscall number is in a0
+	 */
+	addiu	a1, v0,  __NR_O32_Linux
+	bnez	v0, 1f /* __NR_syscall at offset 0 */
+	lw	a1, PT_R4(sp)
+
+1:	jal	syscall_trace_enter
+
+	bltz	v0, 2f			# seccomp failed? Skip syscall
+
+	move	t0, s0
+	RESTORE_STATIC
+	lw	a0, PT_R4(sp)		# Restore argument registers
+	lw	a1, PT_R5(sp)
+	lw	a2, PT_R6(sp)
+	lw	a3, PT_R7(sp)
+	jalr	t0
+
+	li	t0, -EMAXERRNO - 1	# error?
+	sltu	t0, t0, v0
+	sw	t0, PT_R7(sp)		# set error flag
+	beqz	t0, 1f
+
+	lw	t1, PT_R2(sp)		# syscall number
+	negu	v0			# error
+	sw	t1, PT_R0(sp)		# save it for syscall restarting
+1:	sw	v0, PT_R2(sp)		# result
+
+2:	j	syscall_exit
+
+/* ------------------------------------------------------------------------ */
+
+	/*
+	 * The stackpointer for a call with more than 4 arguments is bad.
+	 * We probably should handle this case a bit more drastic.
+	 */
+bad_stack:
+	li	v0, EFAULT
+	sw	v0, PT_R2(sp)
+	li	t0, 1				# set error flag
+	sw	t0, PT_R7(sp)
+	j	o32_syscall_exit
+
+	/*
+	 * The system call does not exist in this kernel
+	 */
+illegal_syscall:
+	li	v0, ENOSYS			# error
+	sw	v0, PT_R2(sp)
+	li	t0, 1				# set error flag
+	sw	t0, PT_R7(sp)
+	j	o32_syscall_exit
+	END(handle_sys)
+
+	LEAF(sys_syscall)
+	subu	t0, a0, __NR_O32_Linux	# check syscall number
+	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
+	beqz	t0, einval		# do not recurse
+	sll	t1, t0, 2
+	beqz	v0, einval
+	lw	t2, sys_call_table(t1)		# syscall routine
+	sw	a0, PT_R2(sp)			# call routine directly on restart
+
+	/* Some syscalls like execve get their arguments from struct pt_regs
+	   and claim zero arguments in the syscall table. Thus we have to
+	   assume the worst case and shuffle around all potential arguments.
+	   If you want performance, don't use indirect syscalls. */
+
+	move	a0, a1				# shift argument registers
+	move	a1, a2
+	move	a2, a3
+	lw	a3, 16(sp)
+	lw	t4, 20(sp)
+	lw	t5, 24(sp)
+	lw	t6, 28(sp)
+	sw	t4, 16(sp)
+	sw	t5, 20(sp)
+	sw	t6, 24(sp)
+	sw	a0, PT_R4(sp)			# .. and push back a0 - a3, some
+	sw	a1, PT_R5(sp)			# syscalls expect them there
+	sw	a2, PT_R6(sp)
+	sw	a3, PT_R7(sp)
+	sw	a3, PT_R26(sp)			# update a3 for syscall restarting
+	jr	t2
+	/* Unreached */
+
+einval: li	v0, -ENOSYS
+	jr	ra
+	END(sys_syscall)
+
+	.align	2
+	.type	sys_call_table, @object
+EXPORT(sys_call_table)
+	PTR	sys_syscall			/* 4000 */
+	PTR	sys_exit
+	PTR	__sys_fork
+	PTR	sys_read
+	PTR	sys_write
+	PTR	sys_open			/* 4005 */
+	PTR	sys_close
+	PTR	sys_waitpid
+	PTR	sys_creat
+	PTR	sys_link
+	PTR	sys_unlink			/* 4010 */
+	PTR	sys_execve
+	PTR	sys_chdir
+	PTR	sys_time
+	PTR	sys_mknod
+	PTR	sys_chmod			/* 4015 */
+	PTR	sys_lchown
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall			/* was sys_stat */
+	PTR	sys_lseek
+	PTR	sys_getpid			/* 4020 */
+	PTR	sys_mount
+	PTR	sys_oldumount
+	PTR	sys_setuid
+	PTR	sys_getuid
+	PTR	sys_stime			/* 4025 */
+	PTR	sys_ptrace
+	PTR	sys_alarm
+	PTR	sys_ni_syscall			/* was sys_fstat */
+	PTR	sys_pause
+	PTR	sys_utime			/* 4030 */
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall
+	PTR	sys_access
+	PTR	sys_nice
+	PTR	sys_ni_syscall			/* 4035 */
+	PTR	sys_sync
+	PTR	sys_kill
+	PTR	sys_rename
+	PTR	sys_mkdir
+	PTR	sys_rmdir			/* 4040 */
+	PTR	sys_dup
+	PTR	sysm_pipe
+	PTR	sys_times
+	PTR	sys_ni_syscall
+	PTR	sys_brk				/* 4045 */
+	PTR	sys_setgid
+	PTR	sys_getgid
+	PTR	sys_ni_syscall			/* was signal(2) */
+	PTR	sys_geteuid
+	PTR	sys_getegid			/* 4050 */
+	PTR	sys_acct
+	PTR	sys_umount
+	PTR	sys_ni_syscall
+	PTR	sys_ioctl
+	PTR	sys_fcntl			/* 4055 */
+	PTR	sys_ni_syscall
+	PTR	sys_setpgid
+	PTR	sys_ni_syscall
+	PTR	sys_olduname
+	PTR	sys_umask			/* 4060 */
+	PTR	sys_chroot
+	PTR	sys_ustat
+	PTR	sys_dup2
+	PTR	sys_getppid
+	PTR	sys_getpgrp			/* 4065 */
+	PTR	sys_setsid
+	PTR	sys_sigaction
+	PTR	sys_sgetmask
+	PTR	sys_ssetmask
+	PTR	sys_setreuid			/* 4070 */
+	PTR	sys_setregid
+	PTR	sys_sigsuspend
+	PTR	sys_sigpending
+	PTR	sys_sethostname
+	PTR	sys_setrlimit			/* 4075 */
+	PTR	sys_getrlimit
+	PTR	sys_getrusage
+	PTR	sys_gettimeofday
+	PTR	sys_settimeofday
+	PTR	sys_getgroups			/* 4080 */
+	PTR	sys_setgroups
+	PTR	sys_ni_syscall			/* old_select */
+	PTR	sys_symlink
+	PTR	sys_ni_syscall			/* was sys_lstat */
+	PTR	sys_readlink			/* 4085 */
+	PTR	sys_uselib
+	PTR	sys_swapon
+	PTR	sys_reboot
+	PTR	sys_old_readdir
+	PTR	sys_mips_mmap			/* 4090 */
+	PTR	sys_munmap
+	PTR	sys_truncate
+	PTR	sys_ftruncate
+	PTR	sys_fchmod
+	PTR	sys_fchown			/* 4095 */
+	PTR	sys_getpriority
+	PTR	sys_setpriority
+	PTR	sys_ni_syscall
+	PTR	sys_statfs
+	PTR	sys_fstatfs			/* 4100 */
+	PTR	sys_ni_syscall			/* was ioperm(2) */
+	PTR	sys_socketcall
+	PTR	sys_syslog
+	PTR	sys_setitimer
+	PTR	sys_getitimer			/* 4105 */
+	PTR	sys_newstat
+	PTR	sys_newlstat
+	PTR	sys_newfstat
+	PTR	sys_uname
+	PTR	sys_ni_syscall			/* 4110 was iopl(2) */
+	PTR	sys_vhangup
+	PTR	sys_ni_syscall			/* was sys_idle() */
+	PTR	sys_ni_syscall			/* was sys_vm86 */
+	PTR	sys_wait4
+	PTR	sys_swapoff			/* 4115 */
+	PTR	sys_sysinfo
+	PTR	sys_ipc
+	PTR	sys_fsync
+	PTR	sys_sigreturn
+	PTR	__sys_clone			/* 4120 */
+	PTR	sys_setdomainname
+	PTR	sys_newuname
+	PTR	sys_ni_syscall			/* sys_modify_ldt */
+	PTR	sys_adjtimex
+	PTR	sys_mprotect			/* 4125 */
+	PTR	sys_sigprocmask
+	PTR	sys_ni_syscall			/* was create_module */
+	PTR	sys_init_module
+	PTR	sys_delete_module
+	PTR	sys_ni_syscall			/* 4130 was get_kernel_syms */
+	PTR	sys_quotactl
+	PTR	sys_getpgid
+	PTR	sys_fchdir
+	PTR	sys_bdflush
+	PTR	sys_sysfs			/* 4135 */
+	PTR	sys_personality
+	PTR	sys_ni_syscall			/* for afs_syscall */
+	PTR	sys_setfsuid
+	PTR	sys_setfsgid
+	PTR	sys_llseek			/* 4140 */
+	PTR	sys_getdents
+	PTR	sys_select
+	PTR	sys_flock
+	PTR	sys_msync
+	PTR	sys_readv			/* 4145 */
+	PTR	sys_writev
+	PTR	sys_cacheflush
+	PTR	sys_cachectl
+	PTR	sys_sysmips
+	PTR	sys_ni_syscall			/* 4150 */
+	PTR	sys_getsid
+	PTR	sys_fdatasync
+	PTR	sys_sysctl
+	PTR	sys_mlock
+	PTR	sys_munlock			/* 4155 */
+	PTR	sys_mlockall
+	PTR	sys_munlockall
+	PTR	sys_sched_setparam
+	PTR	sys_sched_getparam
+	PTR	sys_sched_setscheduler		/* 4160 */
+	PTR	sys_sched_getscheduler
+	PTR	sys_sched_yield
+	PTR	sys_sched_get_priority_max
+	PTR	sys_sched_get_priority_min
+	PTR	sys_sched_rr_get_interval	/* 4165 */
+	PTR	sys_nanosleep
+	PTR	sys_mremap
+	PTR	sys_accept
+	PTR	sys_bind
+	PTR	sys_connect			/* 4170 */
+	PTR	sys_getpeername
+	PTR	sys_getsockname
+	PTR	sys_getsockopt
+	PTR	sys_listen
+	PTR	sys_recv			/* 4175 */
+	PTR	sys_recvfrom
+	PTR	sys_recvmsg
+	PTR	sys_send
+	PTR	sys_sendmsg
+	PTR	sys_sendto			/* 4180 */
+	PTR	sys_setsockopt
+	PTR	sys_shutdown
+	PTR	sys_socket
+	PTR	sys_socketpair
+	PTR	sys_setresuid			/* 4185 */
+	PTR	sys_getresuid
+	PTR	sys_ni_syscall			/* was sys_query_module */
+	PTR	sys_poll
+	PTR	sys_ni_syscall			/* was nfsservctl */
+	PTR	sys_setresgid			/* 4190 */
+	PTR	sys_getresgid
+	PTR	sys_prctl
+	PTR	sys_rt_sigreturn
+	PTR	sys_rt_sigaction
+	PTR	sys_rt_sigprocmask		/* 4195 */
+	PTR	sys_rt_sigpending
+	PTR	sys_rt_sigtimedwait
+	PTR	sys_rt_sigqueueinfo
+	PTR	sys_rt_sigsuspend
+	PTR	sys_pread64			/* 4200 */
+	PTR	sys_pwrite64
+	PTR	sys_chown
+	PTR	sys_getcwd
+	PTR	sys_capget
+	PTR	sys_capset			/* 4205 */
+	PTR	sys_sigaltstack
+	PTR	sys_sendfile
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall
+	PTR	sys_mips_mmap2			/* 4210 */
+	PTR	sys_truncate64
+	PTR	sys_ftruncate64
+	PTR	sys_stat64
+	PTR	sys_lstat64
+	PTR	sys_fstat64			/* 4215 */
+	PTR	sys_pivot_root
+	PTR	sys_mincore
+	PTR	sys_madvise
+	PTR	sys_getdents64
+	PTR	sys_fcntl64			/* 4220 */
+	PTR	sys_ni_syscall
+	PTR	sys_gettid
+	PTR	sys_readahead
+	PTR	sys_setxattr
+	PTR	sys_lsetxattr			/* 4225 */
+	PTR	sys_fsetxattr
+	PTR	sys_getxattr
+	PTR	sys_lgetxattr
+	PTR	sys_fgetxattr
+	PTR	sys_listxattr			/* 4230 */
+	PTR	sys_llistxattr
+	PTR	sys_flistxattr
+	PTR	sys_removexattr
+	PTR	sys_lremovexattr
+	PTR	sys_fremovexattr		/* 4235 */
+	PTR	sys_tkill
+	PTR	sys_sendfile64
+	PTR	sys_futex
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/*
+	 * For FPU affinity scheduling on MIPS MT processors, we need to
+	 * intercept sys_sched_xxxaffinity() calls until we get a proper hook
+	 * in kernel/sched/core.c.  Considered only temporary we only support
+	 * these hooks for the 32-bit kernel - there is no MIPS64 MT processor
+	 * atm.
+	 */
+	PTR	mipsmt_sys_sched_setaffinity
+	PTR	mipsmt_sys_sched_getaffinity
+#else
+	PTR	sys_sched_setaffinity
+	PTR	sys_sched_getaffinity		/* 4240 */
+#endif /* CONFIG_MIPS_MT_FPAFF */
+	PTR	sys_io_setup
+	PTR	sys_io_destroy
+	PTR	sys_io_getevents
+	PTR	sys_io_submit
+	PTR	sys_io_cancel			/* 4245 */
+	PTR	sys_exit_group
+	PTR	sys_lookup_dcookie
+	PTR	sys_epoll_create
+	PTR	sys_epoll_ctl
+	PTR	sys_epoll_wait			/* 4250 */
+	PTR	sys_remap_file_pages
+	PTR	sys_set_tid_address
+	PTR	sys_restart_syscall
+	PTR	sys_fadvise64_64
+	PTR	sys_statfs64			/* 4255 */
+	PTR	sys_fstatfs64
+	PTR	sys_timer_create
+	PTR	sys_timer_settime
+	PTR	sys_timer_gettime
+	PTR	sys_timer_getoverrun		/* 4260 */
+	PTR	sys_timer_delete
+	PTR	sys_clock_settime
+	PTR	sys_clock_gettime
+	PTR	sys_clock_getres
+	PTR	sys_clock_nanosleep		/* 4265 */
+	PTR	sys_tgkill
+	PTR	sys_utimes
+	PTR	sys_mbind
+	PTR	sys_get_mempolicy
+	PTR	sys_set_mempolicy		/* 4270 */
+	PTR	sys_mq_open
+	PTR	sys_mq_unlink
+	PTR	sys_mq_timedsend
+	PTR	sys_mq_timedreceive
+	PTR	sys_mq_notify			/* 4275 */
+	PTR	sys_mq_getsetattr
+	PTR	sys_ni_syscall			/* sys_vserver */
+	PTR	sys_waitid
+	PTR	sys_ni_syscall			/* available, was setaltroot */
+	PTR	sys_add_key			/* 4280 */
+	PTR	sys_request_key
+	PTR	sys_keyctl
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch		/* 4285 */
+	PTR	sys_inotify_rm_watch
+	PTR	sys_migrate_pages
+	PTR	sys_openat
+	PTR	sys_mkdirat
+	PTR	sys_mknodat			/* 4290 */
+	PTR	sys_fchownat
+	PTR	sys_futimesat
+	PTR	sys_fstatat64
+	PTR	sys_unlinkat
+	PTR	sys_renameat			/* 4295 */
+	PTR	sys_linkat
+	PTR	sys_symlinkat
+	PTR	sys_readlinkat
+	PTR	sys_fchmodat
+	PTR	sys_faccessat			/* 4300 */
+	PTR	sys_pselect6
+	PTR	sys_ppoll
+	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys_sync_file_range		/* 4305 */
+	PTR	sys_tee
+	PTR	sys_vmsplice
+	PTR	sys_move_pages
+	PTR	sys_set_robust_list
+	PTR	sys_get_robust_list		/* 4310 */
+	PTR	sys_kexec_load
+	PTR	sys_getcpu
+	PTR	sys_epoll_pwait
+	PTR	sys_ioprio_set
+	PTR	sys_ioprio_get			/* 4315 */
+	PTR	sys_utimensat
+	PTR	sys_signalfd
+	PTR	sys_ni_syscall			/* was timerfd */
+	PTR	sys_eventfd
+	PTR	sys_fallocate			/* 4320 */
+	PTR	sys_timerfd_create
+	PTR	sys_timerfd_gettime
+	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2			/* 4325 */
+	PTR	sys_epoll_create1
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
+	PTR	sys_preadv			/* 4330 */
+	PTR	sys_pwritev
+	PTR	sys_rt_tgsigqueueinfo
+	PTR	sys_perf_event_open
+	PTR	sys_accept4
+	PTR	sys_recvmmsg			/* 4335 */
+	PTR	sys_fanotify_init
+	PTR	sys_fanotify_mark
+	PTR	sys_prlimit64
+	PTR	sys_name_to_handle_at
+	PTR	sys_open_by_handle_at		/* 4340 */
+	PTR	sys_clock_adjtime
+	PTR	sys_syncfs
+	PTR	sys_sendmmsg
+	PTR	sys_setns
+	PTR	sys_process_vm_readv		/* 4345 */
+	PTR	sys_process_vm_writev
+	PTR	sys_kcmp
+	PTR	sys_finit_module
+	PTR	sys_sched_setattr
+	PTR	sys_sched_getattr		/* 4350 */
+	PTR	sys_renameat2
+	PTR	sys_seccomp
+	PTR	sys_getrandom
+	PTR	sys_memfd_create
+	PTR	sys_bpf				/* 4355 */
+	PTR	sys_execveat
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
new file mode 100644
index 000000000..ad4d44635
--- /dev/null
+++ b/arch/mips/kernel/scall64-64.S
@@ -0,0 +1,439 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#include <linux/errno.h>
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/irqflags.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/asm-offsets.h>
+#include <asm/sysmips.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+#include <asm/war.h>
+
+#ifndef CONFIG_BINFMT_ELF32
+/* Neither O32 nor N32, so define handle_sys here */
+#define handle_sys64 handle_sys
+#endif
+
+	.align	5
+NESTED(handle_sys64, PT_SIZE, sp)
+#if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32)
+	/*
+	 * When 32-bit compatibility is configured scall_o32.S
+	 * already did this.
+	 */
+	.set	noat
+	SAVE_SOME
+	TRACE_IRQS_ON_RELOAD
+	STI
+	.set	at
+#endif
+
+	dsubu	t0, v0, __NR_64_Linux	# check syscall number
+	sltiu	t0, t0, __NR_64_Linux_syscalls + 1
+#if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32)
+	ld	t1, PT_EPC(sp)		# skip syscall on return
+	daddiu	t1, 4			# skip to next instruction
+	sd	t1, PT_EPC(sp)
+#endif
+	beqz	t0, illegal_syscall
+
+	dsll	t0, v0, 3		# offset into table
+	ld	t2, (sys_call_table - (__NR_64_Linux * 8))(t0)
+					# syscall routine
+
+	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
+
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
+	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
+	and	t0, t1, t0
+	bnez	t0, syscall_trace_entry
+
+	jalr	t2			# Do The Real Thing (TM)
+
+	li	t0, -EMAXERRNO - 1	# error?
+	sltu	t0, t0, v0
+	sd	t0, PT_R7(sp)		# set error flag
+	beqz	t0, 1f
+
+	ld	t1, PT_R2(sp)		# syscall number
+	dnegu	v0			# error
+	sd	t1, PT_R0(sp)		# save it for syscall restarting
+1:	sd	v0, PT_R2(sp)		# result
+
+n64_syscall_exit:
+	j	syscall_exit_partial
+
+/* ------------------------------------------------------------------------ */
+
+syscall_trace_entry:
+	SAVE_STATIC
+	move	s0, t2
+	move	a0, sp
+	daddiu	a1, v0, __NR_64_Linux
+	jal	syscall_trace_enter
+
+	bltz	v0, 2f			# seccomp failed? Skip syscall
+
+	move	t0, s0
+	RESTORE_STATIC
+	ld	a0, PT_R4(sp)		# Restore argument registers
+	ld	a1, PT_R5(sp)
+	ld	a2, PT_R6(sp)
+	ld	a3, PT_R7(sp)
+	ld	a4, PT_R8(sp)
+	ld	a5, PT_R9(sp)
+	jalr	t0
+
+	li	t0, -EMAXERRNO - 1	# error?
+	sltu	t0, t0, v0
+	sd	t0, PT_R7(sp)		# set error flag
+	beqz	t0, 1f
+
+	ld	t1, PT_R2(sp)		# syscall number
+	dnegu	v0			# error
+	sd	t1, PT_R0(sp)		# save it for syscall restarting
+1:	sd	v0, PT_R2(sp)		# result
+
+2:	j	syscall_exit
+
+illegal_syscall:
+	/* This also isn't a 64-bit syscall, throw an error.  */
+	li	v0, ENOSYS			# error
+	sd	v0, PT_R2(sp)
+	li	t0, 1				# set error flag
+	sd	t0, PT_R7(sp)
+	j	n64_syscall_exit
+	END(handle_sys64)
+
+	.align	3
+	.type	sys_call_table, @object
+EXPORT(sys_call_table)
+	PTR	sys_read			/* 5000 */
+	PTR	sys_write
+	PTR	sys_open
+	PTR	sys_close
+	PTR	sys_newstat
+	PTR	sys_newfstat			/* 5005 */
+	PTR	sys_newlstat
+	PTR	sys_poll
+	PTR	sys_lseek
+	PTR	sys_mips_mmap
+	PTR	sys_mprotect			/* 5010 */
+	PTR	sys_munmap
+	PTR	sys_brk
+	PTR	sys_rt_sigaction
+	PTR	sys_rt_sigprocmask
+	PTR	sys_ioctl			/* 5015 */
+	PTR	sys_pread64
+	PTR	sys_pwrite64
+	PTR	sys_readv
+	PTR	sys_writev
+	PTR	sys_access			/* 5020 */
+	PTR	sysm_pipe
+	PTR	sys_select
+	PTR	sys_sched_yield
+	PTR	sys_mremap
+	PTR	sys_msync			/* 5025 */
+	PTR	sys_mincore
+	PTR	sys_madvise
+	PTR	sys_shmget
+	PTR	sys_shmat
+	PTR	sys_shmctl			/* 5030 */
+	PTR	sys_dup
+	PTR	sys_dup2
+	PTR	sys_pause
+	PTR	sys_nanosleep
+	PTR	sys_getitimer			/* 5035 */
+	PTR	sys_setitimer
+	PTR	sys_alarm
+	PTR	sys_getpid
+	PTR	sys_sendfile64
+	PTR	sys_socket			/* 5040 */
+	PTR	sys_connect
+	PTR	sys_accept
+	PTR	sys_sendto
+	PTR	sys_recvfrom
+	PTR	sys_sendmsg			/* 5045 */
+	PTR	sys_recvmsg
+	PTR	sys_shutdown
+	PTR	sys_bind
+	PTR	sys_listen
+	PTR	sys_getsockname			/* 5050 */
+	PTR	sys_getpeername
+	PTR	sys_socketpair
+	PTR	sys_setsockopt
+	PTR	sys_getsockopt
+	PTR	__sys_clone			/* 5055 */
+	PTR	__sys_fork
+	PTR	sys_execve
+	PTR	sys_exit
+	PTR	sys_wait4
+	PTR	sys_kill			/* 5060 */
+	PTR	sys_newuname
+	PTR	sys_semget
+	PTR	sys_semop
+	PTR	sys_semctl
+	PTR	sys_shmdt			/* 5065 */
+	PTR	sys_msgget
+	PTR	sys_msgsnd
+	PTR	sys_msgrcv
+	PTR	sys_msgctl
+	PTR	sys_fcntl			/* 5070 */
+	PTR	sys_flock
+	PTR	sys_fsync
+	PTR	sys_fdatasync
+	PTR	sys_truncate
+	PTR	sys_ftruncate			/* 5075 */
+	PTR	sys_getdents
+	PTR	sys_getcwd
+	PTR	sys_chdir
+	PTR	sys_fchdir
+	PTR	sys_rename			/* 5080 */
+	PTR	sys_mkdir
+	PTR	sys_rmdir
+	PTR	sys_creat
+	PTR	sys_link
+	PTR	sys_unlink			/* 5085 */
+	PTR	sys_symlink
+	PTR	sys_readlink
+	PTR	sys_chmod
+	PTR	sys_fchmod
+	PTR	sys_chown			/* 5090 */
+	PTR	sys_fchown
+	PTR	sys_lchown
+	PTR	sys_umask
+	PTR	sys_gettimeofday
+	PTR	sys_getrlimit			/* 5095 */
+	PTR	sys_getrusage
+	PTR	sys_sysinfo
+	PTR	sys_times
+	PTR	sys_ptrace
+	PTR	sys_getuid			/* 5100 */
+	PTR	sys_syslog
+	PTR	sys_getgid
+	PTR	sys_setuid
+	PTR	sys_setgid
+	PTR	sys_geteuid			/* 5105 */
+	PTR	sys_getegid
+	PTR	sys_setpgid
+	PTR	sys_getppid
+	PTR	sys_getpgrp
+	PTR	sys_setsid			/* 5110 */
+	PTR	sys_setreuid
+	PTR	sys_setregid
+	PTR	sys_getgroups
+	PTR	sys_setgroups
+	PTR	sys_setresuid			/* 5115 */
+	PTR	sys_getresuid
+	PTR	sys_setresgid
+	PTR	sys_getresgid
+	PTR	sys_getpgid
+	PTR	sys_setfsuid			/* 5120 */
+	PTR	sys_setfsgid
+	PTR	sys_getsid
+	PTR	sys_capget
+	PTR	sys_capset
+	PTR	sys_rt_sigpending		/* 5125 */
+	PTR	sys_rt_sigtimedwait
+	PTR	sys_rt_sigqueueinfo
+	PTR	sys_rt_sigsuspend
+	PTR	sys_sigaltstack
+	PTR	sys_utime			/* 5130 */
+	PTR	sys_mknod
+	PTR	sys_personality
+	PTR	sys_ustat
+	PTR	sys_statfs
+	PTR	sys_fstatfs			/* 5135 */
+	PTR	sys_sysfs
+	PTR	sys_getpriority
+	PTR	sys_setpriority
+	PTR	sys_sched_setparam
+	PTR	sys_sched_getparam		/* 5140 */
+	PTR	sys_sched_setscheduler
+	PTR	sys_sched_getscheduler
+	PTR	sys_sched_get_priority_max
+	PTR	sys_sched_get_priority_min
+	PTR	sys_sched_rr_get_interval	/* 5145 */
+	PTR	sys_mlock
+	PTR	sys_munlock
+	PTR	sys_mlockall
+	PTR	sys_munlockall
+	PTR	sys_vhangup			/* 5150 */
+	PTR	sys_pivot_root
+	PTR	sys_sysctl
+	PTR	sys_prctl
+	PTR	sys_adjtimex
+	PTR	sys_setrlimit			/* 5155 */
+	PTR	sys_chroot
+	PTR	sys_sync
+	PTR	sys_acct
+	PTR	sys_settimeofday
+	PTR	sys_mount			/* 5160 */
+	PTR	sys_umount
+	PTR	sys_swapon
+	PTR	sys_swapoff
+	PTR	sys_reboot
+	PTR	sys_sethostname			/* 5165 */
+	PTR	sys_setdomainname
+	PTR	sys_ni_syscall			/* was create_module */
+	PTR	sys_init_module
+	PTR	sys_delete_module
+	PTR	sys_ni_syscall			/* 5170, was get_kernel_syms */
+	PTR	sys_ni_syscall			/* was query_module */
+	PTR	sys_quotactl
+	PTR	sys_ni_syscall			/* was nfsservctl */
+	PTR	sys_ni_syscall			/* res. for getpmsg */
+	PTR	sys_ni_syscall			/* 5175	 for putpmsg */
+	PTR	sys_ni_syscall			/* res. for afs_syscall */
+	PTR	sys_ni_syscall			/* res. for security */
+	PTR	sys_gettid
+	PTR	sys_readahead
+	PTR	sys_setxattr			/* 5180 */
+	PTR	sys_lsetxattr
+	PTR	sys_fsetxattr
+	PTR	sys_getxattr
+	PTR	sys_lgetxattr
+	PTR	sys_fgetxattr			/* 5185 */
+	PTR	sys_listxattr
+	PTR	sys_llistxattr
+	PTR	sys_flistxattr
+	PTR	sys_removexattr
+	PTR	sys_lremovexattr		/* 5190 */
+	PTR	sys_fremovexattr
+	PTR	sys_tkill
+	PTR	sys_ni_syscall
+	PTR	sys_futex
+	PTR	sys_sched_setaffinity		/* 5195 */
+	PTR	sys_sched_getaffinity
+	PTR	sys_cacheflush
+	PTR	sys_cachectl
+	PTR	sys_sysmips
+	PTR	sys_io_setup			/* 5200 */
+	PTR	sys_io_destroy
+	PTR	sys_io_getevents
+	PTR	sys_io_submit
+	PTR	sys_io_cancel
+	PTR	sys_exit_group			/* 5205 */
+	PTR	sys_lookup_dcookie
+	PTR	sys_epoll_create
+	PTR	sys_epoll_ctl
+	PTR	sys_epoll_wait
+	PTR	sys_remap_file_pages		/* 5210 */
+	PTR	sys_rt_sigreturn
+	PTR	sys_set_tid_address
+	PTR	sys_restart_syscall
+	PTR	sys_semtimedop
+	PTR	sys_fadvise64_64		/* 5215 */
+	PTR	sys_timer_create
+	PTR	sys_timer_settime
+	PTR	sys_timer_gettime
+	PTR	sys_timer_getoverrun
+	PTR	sys_timer_delete		/* 5220 */
+	PTR	sys_clock_settime
+	PTR	sys_clock_gettime
+	PTR	sys_clock_getres
+	PTR	sys_clock_nanosleep
+	PTR	sys_tgkill			/* 5225 */
+	PTR	sys_utimes
+	PTR	sys_mbind
+	PTR	sys_get_mempolicy
+	PTR	sys_set_mempolicy
+	PTR	sys_mq_open			/* 5230 */
+	PTR	sys_mq_unlink
+	PTR	sys_mq_timedsend
+	PTR	sys_mq_timedreceive
+	PTR	sys_mq_notify
+	PTR	sys_mq_getsetattr		/* 5235 */
+	PTR	sys_ni_syscall			/* sys_vserver */
+	PTR	sys_waitid
+	PTR	sys_ni_syscall			/* available, was setaltroot */
+	PTR	sys_add_key
+	PTR	sys_request_key			/* 5240 */
+	PTR	sys_keyctl
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch
+	PTR	sys_inotify_rm_watch		/* 5245 */
+	PTR	sys_migrate_pages
+	PTR	sys_openat
+	PTR	sys_mkdirat
+	PTR	sys_mknodat
+	PTR	sys_fchownat			/* 5250 */
+	PTR	sys_futimesat
+	PTR	sys_newfstatat
+	PTR	sys_unlinkat
+	PTR	sys_renameat
+	PTR	sys_linkat			/* 5255 */
+	PTR	sys_symlinkat
+	PTR	sys_readlinkat
+	PTR	sys_fchmodat
+	PTR	sys_faccessat
+	PTR	sys_pselect6			/* 5260 */
+	PTR	sys_ppoll
+	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys_sync_file_range
+	PTR	sys_tee				/* 5265 */
+	PTR	sys_vmsplice
+	PTR	sys_move_pages
+	PTR	sys_set_robust_list
+	PTR	sys_get_robust_list
+	PTR	sys_kexec_load			/* 5270 */
+	PTR	sys_getcpu
+	PTR	sys_epoll_pwait
+	PTR	sys_ioprio_set
+	PTR	sys_ioprio_get
+	PTR	sys_utimensat			/* 5275 */
+	PTR	sys_signalfd
+	PTR	sys_ni_syscall			/* was timerfd */
+	PTR	sys_eventfd
+	PTR	sys_fallocate
+	PTR	sys_timerfd_create		/* 5280 */
+	PTR	sys_timerfd_gettime
+	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2
+	PTR	sys_epoll_create1		/* 5285 */
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
+	PTR	sys_preadv
+	PTR	sys_pwritev			/* 5290 */
+	PTR	sys_rt_tgsigqueueinfo
+	PTR	sys_perf_event_open
+	PTR	sys_accept4
+	PTR	sys_recvmmsg
+	PTR	sys_fanotify_init		/* 5295 */
+	PTR	sys_fanotify_mark
+	PTR	sys_prlimit64
+	PTR	sys_name_to_handle_at
+	PTR	sys_open_by_handle_at
+	PTR	sys_clock_adjtime		/* 5300 */
+	PTR	sys_syncfs
+	PTR	sys_sendmmsg
+	PTR	sys_setns
+	PTR	sys_process_vm_readv
+	PTR	sys_process_vm_writev		/* 5305 */
+	PTR	sys_kcmp
+	PTR	sys_finit_module
+	PTR	sys_getdents64
+	PTR	sys_sched_setattr
+	PTR	sys_sched_getattr		/* 5310 */
+	PTR	sys_renameat2
+	PTR	sys_seccomp
+	PTR	sys_getrandom
+	PTR	sys_memfd_create
+	PTR	sys_bpf				/* 5315 */
+	PTR	sys_execveat
+	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
new file mode 100644
index 000000000..446cc654d
--- /dev/null
+++ b/arch/mips/kernel/scall64-n32.S
@@ -0,0 +1,432 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#include <linux/errno.h>
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/irqflags.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+
+#ifndef CONFIG_MIPS32_O32
+/* No O32, so define handle_sys here */
+#define handle_sysn32 handle_sys
+#endif
+
+	.align	5
+NESTED(handle_sysn32, PT_SIZE, sp)
+#ifndef CONFIG_MIPS32_O32
+	.set	noat
+	SAVE_SOME
+	TRACE_IRQS_ON_RELOAD
+	STI
+	.set	at
+#endif
+
+	dsubu	t0, v0, __NR_N32_Linux	# check syscall number
+	sltiu	t0, t0, __NR_N32_Linux_syscalls + 1
+
+#ifndef CONFIG_MIPS32_O32
+	ld	t1, PT_EPC(sp)		# skip syscall on return
+	daddiu	t1, 4			# skip to next instruction
+	sd	t1, PT_EPC(sp)
+#endif
+	beqz	t0, not_n32_scall
+
+	dsll	t0, v0, 3		# offset into table
+	ld	t2, (sysn32_call_table - (__NR_N32_Linux * 8))(t0)
+
+	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
+
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
+	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
+	and	t0, t1, t0
+	bnez	t0, n32_syscall_trace_entry
+
+	jalr	t2			# Do The Real Thing (TM)
+
+	li	t0, -EMAXERRNO - 1	# error?
+	sltu	t0, t0, v0
+	sd	t0, PT_R7(sp)		# set error flag
+	beqz	t0, 1f
+
+	ld	t1, PT_R2(sp)		# syscall number
+	dnegu	v0			# error
+	sd	t1, PT_R0(sp)		# save it for syscall restarting
+1:	sd	v0, PT_R2(sp)		# result
+
+	j	syscall_exit_partial
+
+/* ------------------------------------------------------------------------ */
+
+n32_syscall_trace_entry:
+	SAVE_STATIC
+	move	s0, t2
+	move	a0, sp
+	daddiu	a1, v0, __NR_N32_Linux
+	jal	syscall_trace_enter
+
+	bltz	v0, 2f			# seccomp failed? Skip syscall
+
+	move	t0, s0
+	RESTORE_STATIC
+	ld	a0, PT_R4(sp)		# Restore argument registers
+	ld	a1, PT_R5(sp)
+	ld	a2, PT_R6(sp)
+	ld	a3, PT_R7(sp)
+	ld	a4, PT_R8(sp)
+	ld	a5, PT_R9(sp)
+	jalr	t0
+
+	li	t0, -EMAXERRNO - 1	# error?
+	sltu	t0, t0, v0
+	sd	t0, PT_R7(sp)		# set error flag
+	beqz	t0, 1f
+
+	ld	t1, PT_R2(sp)		# syscall number
+	dnegu	v0			# error
+	sd	t1, PT_R0(sp)		# save it for syscall restarting
+1:	sd	v0, PT_R2(sp)		# result
+
+2:	j	syscall_exit
+
+not_n32_scall:
+	/* This is not an n32 compatibility syscall, pass it on to
+	   the n64 syscall handlers.  */
+	j	handle_sys64
+
+	END(handle_sysn32)
+
+	.type	sysn32_call_table, @object
+EXPORT(sysn32_call_table)
+	PTR	sys_read			/* 6000 */
+	PTR	sys_write
+	PTR	sys_open
+	PTR	sys_close
+	PTR	sys_newstat
+	PTR	sys_newfstat			/* 6005 */
+	PTR	sys_newlstat
+	PTR	sys_poll
+	PTR	sys_lseek
+	PTR	sys_mips_mmap
+	PTR	sys_mprotect			/* 6010 */
+	PTR	sys_munmap
+	PTR	sys_brk
+	PTR	compat_sys_rt_sigaction
+	PTR	compat_sys_rt_sigprocmask
+	PTR	compat_sys_ioctl		/* 6015 */
+	PTR	sys_pread64
+	PTR	sys_pwrite64
+	PTR	compat_sys_readv
+	PTR	compat_sys_writev
+	PTR	sys_access			/* 6020 */
+	PTR	sysm_pipe
+	PTR	compat_sys_select
+	PTR	sys_sched_yield
+	PTR	sys_mremap
+	PTR	sys_msync			/* 6025 */
+	PTR	sys_mincore
+	PTR	sys_madvise
+	PTR	sys_shmget
+	PTR	sys_shmat
+	PTR	compat_sys_shmctl			/* 6030 */
+	PTR	sys_dup
+	PTR	sys_dup2
+	PTR	sys_pause
+	PTR	compat_sys_nanosleep
+	PTR	compat_sys_getitimer		/* 6035 */
+	PTR	compat_sys_setitimer
+	PTR	sys_alarm
+	PTR	sys_getpid
+	PTR	compat_sys_sendfile
+	PTR	sys_socket			/* 6040 */
+	PTR	sys_connect
+	PTR	sys_accept
+	PTR	sys_sendto
+	PTR	compat_sys_recvfrom
+	PTR	compat_sys_sendmsg		/* 6045 */
+	PTR	compat_sys_recvmsg
+	PTR	sys_shutdown
+	PTR	sys_bind
+	PTR	sys_listen
+	PTR	sys_getsockname			/* 6050 */
+	PTR	sys_getpeername
+	PTR	sys_socketpair
+	PTR	compat_sys_setsockopt
+	PTR	compat_sys_getsockopt
+	PTR	__sys_clone			/* 6055 */
+	PTR	__sys_fork
+	PTR	compat_sys_execve
+	PTR	sys_exit
+	PTR	compat_sys_wait4
+	PTR	sys_kill			/* 6060 */
+	PTR	sys_newuname
+	PTR	sys_semget
+	PTR	sys_semop
+	PTR	compat_sys_semctl
+	PTR	sys_shmdt			/* 6065 */
+	PTR	sys_msgget
+	PTR	compat_sys_msgsnd
+	PTR	compat_sys_msgrcv
+	PTR	compat_sys_msgctl
+	PTR	compat_sys_fcntl		/* 6070 */
+	PTR	sys_flock
+	PTR	sys_fsync
+	PTR	sys_fdatasync
+	PTR	sys_truncate
+	PTR	sys_ftruncate			/* 6075 */
+	PTR	compat_sys_getdents
+	PTR	sys_getcwd
+	PTR	sys_chdir
+	PTR	sys_fchdir
+	PTR	sys_rename			/* 6080 */
+	PTR	sys_mkdir
+	PTR	sys_rmdir
+	PTR	sys_creat
+	PTR	sys_link
+	PTR	sys_unlink			/* 6085 */
+	PTR	sys_symlink
+	PTR	sys_readlink
+	PTR	sys_chmod
+	PTR	sys_fchmod
+	PTR	sys_chown			/* 6090 */
+	PTR	sys_fchown
+	PTR	sys_lchown
+	PTR	sys_umask
+	PTR	compat_sys_gettimeofday
+	PTR	compat_sys_getrlimit		/* 6095 */
+	PTR	compat_sys_getrusage
+	PTR	compat_sys_sysinfo
+	PTR	compat_sys_times
+	PTR	compat_sys_ptrace
+	PTR	sys_getuid			/* 6100 */
+	PTR	sys_syslog
+	PTR	sys_getgid
+	PTR	sys_setuid
+	PTR	sys_setgid
+	PTR	sys_geteuid			/* 6105 */
+	PTR	sys_getegid
+	PTR	sys_setpgid
+	PTR	sys_getppid
+	PTR	sys_getpgrp
+	PTR	sys_setsid			/* 6110 */
+	PTR	sys_setreuid
+	PTR	sys_setregid
+	PTR	sys_getgroups
+	PTR	sys_setgroups
+	PTR	sys_setresuid			/* 6115 */
+	PTR	sys_getresuid
+	PTR	sys_setresgid
+	PTR	sys_getresgid
+	PTR	sys_getpgid
+	PTR	sys_setfsuid			/* 6120 */
+	PTR	sys_setfsgid
+	PTR	sys_getsid
+	PTR	sys_capget
+	PTR	sys_capset
+	PTR	compat_sys_rt_sigpending	/* 6125 */
+	PTR	compat_sys_rt_sigtimedwait
+	PTR	compat_sys_rt_sigqueueinfo
+	PTR	compat_sys_rt_sigsuspend
+	PTR	compat_sys_sigaltstack
+	PTR	compat_sys_utime		/* 6130 */
+	PTR	sys_mknod
+	PTR	sys_32_personality
+	PTR	compat_sys_ustat
+	PTR	compat_sys_statfs
+	PTR	compat_sys_fstatfs		/* 6135 */
+	PTR	sys_sysfs
+	PTR	sys_getpriority
+	PTR	sys_setpriority
+	PTR	sys_sched_setparam
+	PTR	sys_sched_getparam		/* 6140 */
+	PTR	sys_sched_setscheduler
+	PTR	sys_sched_getscheduler
+	PTR	sys_sched_get_priority_max
+	PTR	sys_sched_get_priority_min
+	PTR	compat_sys_sched_rr_get_interval	/* 6145 */
+	PTR	sys_mlock
+	PTR	sys_munlock
+	PTR	sys_mlockall
+	PTR	sys_munlockall
+	PTR	sys_vhangup			/* 6150 */
+	PTR	sys_pivot_root
+	PTR	compat_sys_sysctl
+	PTR	sys_prctl
+	PTR	compat_sys_adjtimex
+	PTR	compat_sys_setrlimit		/* 6155 */
+	PTR	sys_chroot
+	PTR	sys_sync
+	PTR	sys_acct
+	PTR	compat_sys_settimeofday
+	PTR	compat_sys_mount		/* 6160 */
+	PTR	sys_umount
+	PTR	sys_swapon
+	PTR	sys_swapoff
+	PTR	sys_reboot
+	PTR	sys_sethostname			/* 6165 */
+	PTR	sys_setdomainname
+	PTR	sys_ni_syscall			/* was create_module */
+	PTR	sys_init_module
+	PTR	sys_delete_module
+	PTR	sys_ni_syscall			/* 6170, was get_kernel_syms */
+	PTR	sys_ni_syscall			/* was query_module */
+	PTR	sys_quotactl
+	PTR	sys_ni_syscall			/* was nfsservctl */
+	PTR	sys_ni_syscall			/* res. for getpmsg */
+	PTR	sys_ni_syscall			/* 6175	 for putpmsg */
+	PTR	sys_ni_syscall			/* res. for afs_syscall */
+	PTR	sys_ni_syscall			/* res. for security */
+	PTR	sys_gettid
+	PTR	sys_readahead
+	PTR	sys_setxattr			/* 6180 */
+	PTR	sys_lsetxattr
+	PTR	sys_fsetxattr
+	PTR	sys_getxattr
+	PTR	sys_lgetxattr
+	PTR	sys_fgetxattr			/* 6185 */
+	PTR	sys_listxattr
+	PTR	sys_llistxattr
+	PTR	sys_flistxattr
+	PTR	sys_removexattr
+	PTR	sys_lremovexattr		/* 6190 */
+	PTR	sys_fremovexattr
+	PTR	sys_tkill
+	PTR	sys_ni_syscall
+	PTR	compat_sys_futex
+	PTR	compat_sys_sched_setaffinity	/* 6195 */
+	PTR	compat_sys_sched_getaffinity
+	PTR	sys_cacheflush
+	PTR	sys_cachectl
+	PTR	sys_sysmips
+	PTR	compat_sys_io_setup			/* 6200 */
+	PTR	sys_io_destroy
+	PTR	compat_sys_io_getevents
+	PTR	compat_sys_io_submit
+	PTR	sys_io_cancel
+	PTR	sys_exit_group			/* 6205 */
+	PTR	sys_lookup_dcookie
+	PTR	sys_epoll_create
+	PTR	sys_epoll_ctl
+	PTR	sys_epoll_wait
+	PTR	sys_remap_file_pages		/* 6210 */
+	PTR	sysn32_rt_sigreturn
+	PTR	compat_sys_fcntl64
+	PTR	sys_set_tid_address
+	PTR	sys_restart_syscall
+	PTR	compat_sys_semtimedop			/* 6215 */
+	PTR	sys_fadvise64_64
+	PTR	compat_sys_statfs64
+	PTR	compat_sys_fstatfs64
+	PTR	sys_sendfile64
+	PTR	compat_sys_timer_create		/* 6220 */
+	PTR	compat_sys_timer_settime
+	PTR	compat_sys_timer_gettime
+	PTR	sys_timer_getoverrun
+	PTR	sys_timer_delete
+	PTR	compat_sys_clock_settime		/* 6225 */
+	PTR	compat_sys_clock_gettime
+	PTR	compat_sys_clock_getres
+	PTR	compat_sys_clock_nanosleep
+	PTR	sys_tgkill
+	PTR	compat_sys_utimes		/* 6230 */
+	PTR	compat_sys_mbind
+	PTR	compat_sys_get_mempolicy
+	PTR	compat_sys_set_mempolicy
+	PTR	compat_sys_mq_open
+	PTR	sys_mq_unlink			/* 6235 */
+	PTR	compat_sys_mq_timedsend
+	PTR	compat_sys_mq_timedreceive
+	PTR	compat_sys_mq_notify
+	PTR	compat_sys_mq_getsetattr
+	PTR	sys_ni_syscall			/* 6240, sys_vserver */
+	PTR	compat_sys_waitid
+	PTR	sys_ni_syscall			/* available, was setaltroot */
+	PTR	sys_add_key
+	PTR	sys_request_key
+	PTR	sys_keyctl			/* 6245 */
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch
+	PTR	sys_inotify_rm_watch
+	PTR	compat_sys_migrate_pages	/* 6250 */
+	PTR	sys_openat
+	PTR	sys_mkdirat
+	PTR	sys_mknodat
+	PTR	sys_fchownat
+	PTR	compat_sys_futimesat		/* 6255 */
+	PTR	sys_newfstatat
+	PTR	sys_unlinkat
+	PTR	sys_renameat
+	PTR	sys_linkat
+	PTR	sys_symlinkat			/* 6260 */
+	PTR	sys_readlinkat
+	PTR	sys_fchmodat
+	PTR	sys_faccessat
+	PTR	compat_sys_pselect6
+	PTR	compat_sys_ppoll		/* 6265 */
+	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys_sync_file_range
+	PTR	sys_tee
+	PTR	compat_sys_vmsplice		/* 6270 */
+	PTR	compat_sys_move_pages
+	PTR	compat_sys_set_robust_list
+	PTR	compat_sys_get_robust_list
+	PTR	compat_sys_kexec_load
+	PTR	sys_getcpu			/* 6275 */
+	PTR	compat_sys_epoll_pwait
+	PTR	sys_ioprio_set
+	PTR	sys_ioprio_get
+	PTR	compat_sys_utimensat
+	PTR	compat_sys_signalfd		/* 6280 */
+	PTR	sys_ni_syscall			/* was timerfd */
+	PTR	sys_eventfd
+	PTR	sys_fallocate
+	PTR	sys_timerfd_create
+	PTR	compat_sys_timerfd_gettime	/* 6285 */
+	PTR	compat_sys_timerfd_settime
+	PTR	compat_sys_signalfd4
+	PTR	sys_eventfd2
+	PTR	sys_epoll_create1
+	PTR	sys_dup3			/* 6290 */
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
+	PTR	compat_sys_preadv
+	PTR	compat_sys_pwritev
+	PTR	compat_sys_rt_tgsigqueueinfo	/* 6295 */
+	PTR	sys_perf_event_open
+	PTR	sys_accept4
+	PTR	compat_sys_recvmmsg
+	PTR	sys_getdents64
+	PTR	sys_fanotify_init		/* 6300 */
+	PTR	sys_fanotify_mark
+	PTR	sys_prlimit64
+	PTR	sys_name_to_handle_at
+	PTR	sys_open_by_handle_at
+	PTR	compat_sys_clock_adjtime	/* 6305 */
+	PTR	sys_syncfs
+	PTR	compat_sys_sendmmsg
+	PTR	sys_setns
+	PTR	compat_sys_process_vm_readv
+	PTR	compat_sys_process_vm_writev	/* 6310 */
+	PTR	sys_kcmp
+	PTR	sys_finit_module
+	PTR	sys_sched_setattr
+	PTR	sys_sched_getattr
+	PTR	sys_renameat2			/* 6315 */
+	PTR	sys_seccomp
+	PTR	sys_getrandom
+	PTR	sys_memfd_create
+	PTR	sys_bpf
+	PTR	compat_sys_execveat		/* 6320 */
+	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
new file mode 100644
index 000000000..d07b210fb
--- /dev/null
+++ b/arch/mips/kernel/scall64-o32.S
@@ -0,0 +1,570 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 - 2000, 2001 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2004 Thiemo Seufer
+ *
+ * Hairy, the userspace application uses a different argument passing
+ * convention than the kernel, so we have to translate things from o32
+ * to ABI64 calling convention.	 64-bit syscalls are also processed
+ * here for now.
+ */
+#include <linux/errno.h>
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/irqflags.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+#include <asm/sysmips.h>
+
+	.align	5
+NESTED(handle_sys, PT_SIZE, sp)
+	.set	noat
+	SAVE_SOME
+	TRACE_IRQS_ON_RELOAD
+	STI
+	.set	at
+	ld	t1, PT_EPC(sp)		# skip syscall on return
+
+	dsubu	t0, v0, __NR_O32_Linux	# check syscall number
+	sltiu	t0, t0, __NR_O32_Linux_syscalls + 1
+	daddiu	t1, 4			# skip to next instruction
+	sd	t1, PT_EPC(sp)
+	beqz	t0, not_o32_scall
+#if 0
+ SAVE_ALL
+ move a1, v0
+ PRINT("Scall %ld\n")
+ RESTORE_ALL
+#endif
+
+	/* We don't want to stumble over broken sign extensions from
+	   userland. O32 does never use the upper half. */
+	sll	a0, a0, 0
+	sll	a1, a1, 0
+	sll	a2, a2, 0
+	sll	a3, a3, 0
+
+	dsll	t0, v0, 3		# offset into table
+	ld	t2, (sys32_call_table - (__NR_O32_Linux * 8))(t0)
+
+	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
+
+	/*
+	 * More than four arguments.  Try to deal with it by copying the
+	 * stack arguments from the user stack to the kernel stack.
+	 * This Sucks (TM).
+	 *
+	 * We intentionally keep the kernel stack a little below the top of
+	 * userspace so we don't have to do a slower byte accurate check here.
+	 */
+	ld	t0, PT_R29(sp)		# get old user stack pointer
+	daddu	t1, t0, 32
+	bltz	t1, bad_stack
+
+1:	lw	a4, 16(t0)		# argument #5 from usp
+2:	lw	a5, 20(t0)		# argument #6 from usp
+3:	lw	a6, 24(t0)		# argument #7 from usp
+4:	lw	a7, 28(t0)		# argument #8 from usp (for indirect syscalls)
+
+	.section __ex_table,"a"
+	PTR	1b, bad_stack
+	PTR	2b, bad_stack
+	PTR	3b, bad_stack
+	PTR	4b, bad_stack
+	.previous
+
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
+	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
+	and	t0, t1, t0
+	bnez	t0, trace_a_syscall
+
+	jalr	t2			# Do The Real Thing (TM)
+
+	li	t0, -EMAXERRNO - 1	# error?
+	sltu	t0, t0, v0
+	sd	t0, PT_R7(sp)		# set error flag
+	beqz	t0, 1f
+
+	ld	t1, PT_R2(sp)		# syscall number
+	dnegu	v0			# error
+	sd	t1, PT_R0(sp)		# save it for syscall restarting
+1:	sd	v0, PT_R2(sp)		# result
+
+o32_syscall_exit:
+	j	syscall_exit_partial
+
+/* ------------------------------------------------------------------------ */
+
+trace_a_syscall:
+	SAVE_STATIC
+	sd	a4, PT_R8(sp)		# Save argument registers
+	sd	a5, PT_R9(sp)
+	sd	a6, PT_R10(sp)
+	sd	a7, PT_R11(sp)		# For indirect syscalls
+
+	move	s0, t2			# Save syscall pointer
+	move	a0, sp
+	/*
+	 * absolute syscall number is in v0 unless we called syscall(__NR_###)
+	 * where the real syscall number is in a0
+	 * note: NR_syscall is the first O32 syscall but the macro is
+	 * only defined when compiling with -mabi=32 (CONFIG_32BIT)
+	 * therefore __NR_O32_Linux is used (4000)
+	 */
+	.set	push
+	.set	reorder
+	subu	t1, v0,  __NR_O32_Linux
+	move	a1, v0
+	bnez	t1, 1f /* __NR_syscall at offset 0 */
+	lw	a1, PT_R4(sp) /* Arg1 for __NR_syscall case */
+	.set	pop
+
+1:	jal	syscall_trace_enter
+
+	bltz	v0, 2f			# seccomp failed? Skip syscall
+
+	move	t0, s0
+	RESTORE_STATIC
+	ld	a0, PT_R4(sp)		# Restore argument registers
+	ld	a1, PT_R5(sp)
+	ld	a2, PT_R6(sp)
+	ld	a3, PT_R7(sp)
+	ld	a4, PT_R8(sp)
+	ld	a5, PT_R9(sp)
+	ld	a6, PT_R10(sp)
+	ld	a7, PT_R11(sp)		# For indirect syscalls
+	jalr	t0
+
+	li	t0, -EMAXERRNO - 1	# error?
+	sltu	t0, t0, v0
+	sd	t0, PT_R7(sp)		# set error flag
+	beqz	t0, 1f
+
+	ld	t1, PT_R2(sp)		# syscall number
+	dnegu	v0			# error
+	sd	t1, PT_R0(sp)		# save it for syscall restarting
+1:	sd	v0, PT_R2(sp)		# result
+
+2:	j	syscall_exit
+
+/* ------------------------------------------------------------------------ */
+
+	/*
+	 * The stackpointer for a call with more than 4 arguments is bad.
+	 */
+bad_stack:
+	li	v0, EFAULT
+	sd	v0, PT_R2(sp)
+	li	t0, 1			# set error flag
+	sd	t0, PT_R7(sp)
+	j	o32_syscall_exit
+
+not_o32_scall:
+	/*
+	 * This is not an o32 compatibility syscall, pass it on
+	 * to the 64-bit syscall handlers.
+	 */
+#ifdef CONFIG_MIPS32_N32
+	j	handle_sysn32
+#else
+	j	handle_sys64
+#endif
+	END(handle_sys)
+
+LEAF(sys32_syscall)
+	subu	t0, a0, __NR_O32_Linux	# check syscall number
+	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
+	beqz	t0, einval		# do not recurse
+	dsll	t1, t0, 3
+	beqz	v0, einval
+	ld	t2, sys32_call_table(t1)		# syscall routine
+	sd	a0, PT_R2(sp)		# call routine directly on restart
+
+	move	a0, a1			# shift argument registers
+	move	a1, a2
+	move	a2, a3
+	move	a3, a4
+	move	a4, a5
+	move	a5, a6
+	move	a6, a7
+	sd	a0, PT_R4(sp)		# ... and push back a0 - a3, some
+	sd	a1, PT_R5(sp)		# syscalls expect them there
+	sd	a2, PT_R6(sp)
+	sd	a3, PT_R7(sp)
+	sd	a3, PT_R26(sp)		# update a3 for syscall restarting
+	jr	t2
+	/* Unreached */
+
+einval: li	v0, -ENOSYS
+	jr	ra
+	END(sys32_syscall)
+
+	.align	3
+	.type	sys32_call_table,@object
+EXPORT(sys32_call_table)
+	PTR	sys32_syscall			/* 4000 */
+	PTR	sys_exit
+	PTR	__sys_fork
+	PTR	sys_read
+	PTR	sys_write
+	PTR	compat_sys_open			/* 4005 */
+	PTR	sys_close
+	PTR	sys_waitpid
+	PTR	sys_creat
+	PTR	sys_link
+	PTR	sys_unlink			/* 4010 */
+	PTR	compat_sys_execve
+	PTR	sys_chdir
+	PTR	compat_sys_time
+	PTR	sys_mknod
+	PTR	sys_chmod			/* 4015 */
+	PTR	sys_lchown
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall			/* was sys_stat */
+	PTR	sys_lseek
+	PTR	sys_getpid			/* 4020 */
+	PTR	compat_sys_mount
+	PTR	sys_oldumount
+	PTR	sys_setuid
+	PTR	sys_getuid
+	PTR	compat_sys_stime		/* 4025 */
+	PTR	compat_sys_ptrace
+	PTR	sys_alarm
+	PTR	sys_ni_syscall			/* was sys_fstat */
+	PTR	sys_pause
+	PTR	compat_sys_utime		/* 4030 */
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall
+	PTR	sys_access
+	PTR	sys_nice
+	PTR	sys_ni_syscall			/* 4035 */
+	PTR	sys_sync
+	PTR	sys_kill
+	PTR	sys_rename
+	PTR	sys_mkdir
+	PTR	sys_rmdir			/* 4040 */
+	PTR	sys_dup
+	PTR	sysm_pipe
+	PTR	compat_sys_times
+	PTR	sys_ni_syscall
+	PTR	sys_brk				/* 4045 */
+	PTR	sys_setgid
+	PTR	sys_getgid
+	PTR	sys_ni_syscall			/* was signal	2 */
+	PTR	sys_geteuid
+	PTR	sys_getegid			/* 4050 */
+	PTR	sys_acct
+	PTR	sys_umount
+	PTR	sys_ni_syscall
+	PTR	compat_sys_ioctl
+	PTR	compat_sys_fcntl		/* 4055 */
+	PTR	sys_ni_syscall
+	PTR	sys_setpgid
+	PTR	sys_ni_syscall
+	PTR	sys_olduname
+	PTR	sys_umask			/* 4060 */
+	PTR	sys_chroot
+	PTR	compat_sys_ustat
+	PTR	sys_dup2
+	PTR	sys_getppid
+	PTR	sys_getpgrp			/* 4065 */
+	PTR	sys_setsid
+	PTR	sys_32_sigaction
+	PTR	sys_sgetmask
+	PTR	sys_ssetmask
+	PTR	sys_setreuid			/* 4070 */
+	PTR	sys_setregid
+	PTR	sys32_sigsuspend
+	PTR	compat_sys_sigpending
+	PTR	sys_sethostname
+	PTR	compat_sys_setrlimit		/* 4075 */
+	PTR	compat_sys_getrlimit
+	PTR	compat_sys_getrusage
+	PTR	compat_sys_gettimeofday
+	PTR	compat_sys_settimeofday
+	PTR	sys_getgroups			/* 4080 */
+	PTR	sys_setgroups
+	PTR	sys_ni_syscall			/* old_select */
+	PTR	sys_symlink
+	PTR	sys_ni_syscall			/* was sys_lstat */
+	PTR	sys_readlink			/* 4085 */
+	PTR	sys_uselib
+	PTR	sys_swapon
+	PTR	sys_reboot
+	PTR	compat_sys_old_readdir
+	PTR	sys_mips_mmap			/* 4090 */
+	PTR	sys_munmap
+	PTR	compat_sys_truncate
+	PTR	compat_sys_ftruncate
+	PTR	sys_fchmod
+	PTR	sys_fchown			/* 4095 */
+	PTR	sys_getpriority
+	PTR	sys_setpriority
+	PTR	sys_ni_syscall
+	PTR	compat_sys_statfs
+	PTR	compat_sys_fstatfs		/* 4100 */
+	PTR	sys_ni_syscall			/* sys_ioperm */
+	PTR	compat_sys_socketcall
+	PTR	sys_syslog
+	PTR	compat_sys_setitimer
+	PTR	compat_sys_getitimer		/* 4105 */
+	PTR	compat_sys_newstat
+	PTR	compat_sys_newlstat
+	PTR	compat_sys_newfstat
+	PTR	sys_uname
+	PTR	sys_ni_syscall			/* sys_ioperm  *//* 4110 */
+	PTR	sys_vhangup
+	PTR	sys_ni_syscall			/* was sys_idle	 */
+	PTR	sys_ni_syscall			/* sys_vm86 */
+	PTR	compat_sys_wait4
+	PTR	sys_swapoff			/* 4115 */
+	PTR	compat_sys_sysinfo
+	PTR	compat_sys_ipc
+	PTR	sys_fsync
+	PTR	sys32_sigreturn
+	PTR	__sys_clone			/* 4120 */
+	PTR	sys_setdomainname
+	PTR	sys_newuname
+	PTR	sys_ni_syscall			/* sys_modify_ldt */
+	PTR	compat_sys_adjtimex
+	PTR	sys_mprotect			/* 4125 */
+	PTR	compat_sys_sigprocmask
+	PTR	sys_ni_syscall			/* was creat_module */
+	PTR	sys_init_module
+	PTR	sys_delete_module
+	PTR	sys_ni_syscall			/* 4130, get_kernel_syms */
+	PTR	sys_quotactl
+	PTR	sys_getpgid
+	PTR	sys_fchdir
+	PTR	sys_bdflush
+	PTR	sys_sysfs			/* 4135 */
+	PTR	sys_32_personality
+	PTR	sys_ni_syscall			/* for afs_syscall */
+	PTR	sys_setfsuid
+	PTR	sys_setfsgid
+	PTR	sys_32_llseek			/* 4140 */
+	PTR	compat_sys_getdents
+	PTR	compat_sys_select
+	PTR	sys_flock
+	PTR	sys_msync
+	PTR	compat_sys_readv		/* 4145 */
+	PTR	compat_sys_writev
+	PTR	sys_cacheflush
+	PTR	sys_cachectl
+	PTR	sys_sysmips
+	PTR	sys_ni_syscall			/* 4150 */
+	PTR	sys_getsid
+	PTR	sys_fdatasync
+	PTR	compat_sys_sysctl
+	PTR	sys_mlock
+	PTR	sys_munlock			/* 4155 */
+	PTR	sys_mlockall
+	PTR	sys_munlockall
+	PTR	sys_sched_setparam
+	PTR	sys_sched_getparam
+	PTR	sys_sched_setscheduler		/* 4160 */
+	PTR	sys_sched_getscheduler
+	PTR	sys_sched_yield
+	PTR	sys_sched_get_priority_max
+	PTR	sys_sched_get_priority_min
+	PTR	compat_sys_sched_rr_get_interval	/* 4165 */
+	PTR	compat_sys_nanosleep
+	PTR	sys_mremap
+	PTR	sys_accept
+	PTR	sys_bind
+	PTR	sys_connect			/* 4170 */
+	PTR	sys_getpeername
+	PTR	sys_getsockname
+	PTR	sys_getsockopt
+	PTR	sys_listen
+	PTR	compat_sys_recv			/* 4175 */
+	PTR	compat_sys_recvfrom
+	PTR	compat_sys_recvmsg
+	PTR	sys_send
+	PTR	compat_sys_sendmsg
+	PTR	sys_sendto			/* 4180 */
+	PTR	compat_sys_setsockopt
+	PTR	sys_shutdown
+	PTR	sys_socket
+	PTR	sys_socketpair
+	PTR	sys_setresuid			/* 4185 */
+	PTR	sys_getresuid
+	PTR	sys_ni_syscall			/* was query_module */
+	PTR	sys_poll
+	PTR	sys_ni_syscall			/* was nfsservctl */
+	PTR	sys_setresgid			/* 4190 */
+	PTR	sys_getresgid
+	PTR	sys_prctl
+	PTR	sys32_rt_sigreturn
+	PTR	compat_sys_rt_sigaction
+	PTR	compat_sys_rt_sigprocmask	/* 4195 */
+	PTR	compat_sys_rt_sigpending
+	PTR	compat_sys_rt_sigtimedwait
+	PTR	compat_sys_rt_sigqueueinfo
+	PTR	compat_sys_rt_sigsuspend
+	PTR	sys_32_pread			/* 4200 */
+	PTR	sys_32_pwrite
+	PTR	sys_chown
+	PTR	sys_getcwd
+	PTR	sys_capget
+	PTR	sys_capset			/* 4205 */
+	PTR	compat_sys_sigaltstack
+	PTR	compat_sys_sendfile
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall
+	PTR	sys_mips_mmap2			/* 4210 */
+	PTR	sys_32_truncate64
+	PTR	sys_32_ftruncate64
+	PTR	sys_newstat
+	PTR	sys_newlstat
+	PTR	sys_newfstat			/* 4215 */
+	PTR	sys_pivot_root
+	PTR	sys_mincore
+	PTR	sys_madvise
+	PTR	sys_getdents64
+	PTR	compat_sys_fcntl64		/* 4220 */
+	PTR	sys_ni_syscall
+	PTR	sys_gettid
+	PTR	sys32_readahead
+	PTR	sys_setxattr
+	PTR	sys_lsetxattr			/* 4225 */
+	PTR	sys_fsetxattr
+	PTR	sys_getxattr
+	PTR	sys_lgetxattr
+	PTR	sys_fgetxattr
+	PTR	sys_listxattr			/* 4230 */
+	PTR	sys_llistxattr
+	PTR	sys_flistxattr
+	PTR	sys_removexattr
+	PTR	sys_lremovexattr
+	PTR	sys_fremovexattr		/* 4235 */
+	PTR	sys_tkill
+	PTR	sys_sendfile64
+	PTR	compat_sys_futex
+	PTR	compat_sys_sched_setaffinity
+	PTR	compat_sys_sched_getaffinity	/* 4240 */
+	PTR	compat_sys_io_setup
+	PTR	sys_io_destroy
+	PTR	compat_sys_io_getevents
+	PTR	compat_sys_io_submit
+	PTR	sys_io_cancel			/* 4245 */
+	PTR	sys_exit_group
+	PTR	compat_sys_lookup_dcookie
+	PTR	sys_epoll_create
+	PTR	sys_epoll_ctl
+	PTR	sys_epoll_wait			/* 4250 */
+	PTR	sys_remap_file_pages
+	PTR	sys_set_tid_address
+	PTR	sys_restart_syscall
+	PTR	sys32_fadvise64_64
+	PTR	compat_sys_statfs64		/* 4255 */
+	PTR	compat_sys_fstatfs64
+	PTR	compat_sys_timer_create
+	PTR	compat_sys_timer_settime
+	PTR	compat_sys_timer_gettime
+	PTR	sys_timer_getoverrun		/* 4260 */
+	PTR	sys_timer_delete
+	PTR	compat_sys_clock_settime
+	PTR	compat_sys_clock_gettime
+	PTR	compat_sys_clock_getres
+	PTR	compat_sys_clock_nanosleep	/* 4265 */
+	PTR	sys_tgkill
+	PTR	compat_sys_utimes
+	PTR	compat_sys_mbind
+	PTR	compat_sys_get_mempolicy
+	PTR	compat_sys_set_mempolicy	/* 4270 */
+	PTR	compat_sys_mq_open
+	PTR	sys_mq_unlink
+	PTR	compat_sys_mq_timedsend
+	PTR	compat_sys_mq_timedreceive
+	PTR	compat_sys_mq_notify		/* 4275 */
+	PTR	compat_sys_mq_getsetattr
+	PTR	sys_ni_syscall			/* sys_vserver */
+	PTR	compat_sys_waitid
+	PTR	sys_ni_syscall			/* available, was setaltroot */
+	PTR	sys_add_key			/* 4280 */
+	PTR	sys_request_key
+	PTR	sys_keyctl
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch		/* 4285 */
+	PTR	sys_inotify_rm_watch
+	PTR	compat_sys_migrate_pages
+	PTR	compat_sys_openat
+	PTR	sys_mkdirat
+	PTR	sys_mknodat			/* 4290 */
+	PTR	sys_fchownat
+	PTR	compat_sys_futimesat
+	PTR	sys_newfstatat
+	PTR	sys_unlinkat
+	PTR	sys_renameat			/* 4295 */
+	PTR	sys_linkat
+	PTR	sys_symlinkat
+	PTR	sys_readlinkat
+	PTR	sys_fchmodat
+	PTR	sys_faccessat			/* 4300 */
+	PTR	compat_sys_pselect6
+	PTR	compat_sys_ppoll
+	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys32_sync_file_range		/* 4305 */
+	PTR	sys_tee
+	PTR	compat_sys_vmsplice
+	PTR	compat_sys_move_pages
+	PTR	compat_sys_set_robust_list
+	PTR	compat_sys_get_robust_list	/* 4310 */
+	PTR	compat_sys_kexec_load
+	PTR	sys_getcpu
+	PTR	compat_sys_epoll_pwait
+	PTR	sys_ioprio_set
+	PTR	sys_ioprio_get			/* 4315 */
+	PTR	compat_sys_utimensat
+	PTR	compat_sys_signalfd
+	PTR	sys_ni_syscall			/* was timerfd */
+	PTR	sys_eventfd
+	PTR	sys32_fallocate			/* 4320 */
+	PTR	sys_timerfd_create
+	PTR	compat_sys_timerfd_gettime
+	PTR	compat_sys_timerfd_settime
+	PTR	compat_sys_signalfd4
+	PTR	sys_eventfd2			/* 4325 */
+	PTR	sys_epoll_create1
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
+	PTR	compat_sys_preadv		/* 4330 */
+	PTR	compat_sys_pwritev
+	PTR	compat_sys_rt_tgsigqueueinfo
+	PTR	sys_perf_event_open
+	PTR	sys_accept4
+	PTR	compat_sys_recvmmsg		/* 4335 */
+	PTR	sys_fanotify_init
+	PTR	compat_sys_fanotify_mark
+	PTR	sys_prlimit64
+	PTR	sys_name_to_handle_at
+	PTR	compat_sys_open_by_handle_at	/* 4340 */
+	PTR	compat_sys_clock_adjtime
+	PTR	sys_syncfs
+	PTR	compat_sys_sendmmsg
+	PTR	sys_setns
+	PTR	compat_sys_process_vm_readv	/* 4345 */
+	PTR	compat_sys_process_vm_writev
+	PTR	sys_kcmp
+	PTR	sys_finit_module
+	PTR	sys_sched_setattr
+	PTR	sys_sched_getattr		/* 4350 */
+	PTR	sys_renameat2
+	PTR	sys_seccomp
+	PTR	sys_getrandom
+	PTR	sys_memfd_create
+	PTR	sys_bpf				/* 4355 */
+	PTR	compat_sys_execveat
+	.size	sys32_call_table,.-sys32_call_table
diff --git a/arch/mips/kernel/segment.c b/arch/mips/kernel/segment.c
new file mode 100644
index 000000000..076ead2a9
--- /dev/null
+++ b/arch/mips/kernel/segment.c
@@ -0,0 +1,110 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ */
+
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+
+static void build_segment_config(char *str, unsigned int cfg)
+{
+	unsigned int am;
+	static const char * const am_str[] = {
+		"UK", "MK", "MSK", "MUSK", "MUSUK", "USK",
+		"RSRVD", "UUSK"};
+
+	/* Segment access mode. */
+	am = (cfg & MIPS_SEGCFG_AM) >> MIPS_SEGCFG_AM_SHIFT;
+	str += sprintf(str, "%-5s", am_str[am]);
+
+	/*
+	 * Access modes MK, MSK and MUSK are mapped segments. Therefore
+	 * there is no direct physical address mapping.
+	 */
+	if ((am == 0) || (am > 3)) {
+		str += sprintf(str, "         %03lx",
+			((cfg & MIPS_SEGCFG_PA) >> MIPS_SEGCFG_PA_SHIFT));
+		str += sprintf(str, "         %01ld",
+			((cfg & MIPS_SEGCFG_C) >> MIPS_SEGCFG_C_SHIFT));
+	} else {
+		str += sprintf(str, "         UND");
+		str += sprintf(str, "         U");
+	}
+
+	/* Exception configuration. */
+	str += sprintf(str, "       %01ld\n",
+		((cfg & MIPS_SEGCFG_EU) >> MIPS_SEGCFG_EU_SHIFT));
+}
+
+static int show_segments(struct seq_file *m, void *v)
+{
+	unsigned int segcfg;
+	char str[42];
+
+	seq_puts(m, "Segment   Virtual    Size   Access Mode   Physical   Caching   EU\n");
+	seq_puts(m, "-------   -------    ----   -----------   --------   -------   --\n");
+
+	segcfg = read_c0_segctl0();
+	build_segment_config(str, segcfg);
+	seq_printf(m, "   0      e0000000   512M      %s", str);
+
+	segcfg >>= 16;
+	build_segment_config(str, segcfg);
+	seq_printf(m, "   1      c0000000   512M      %s", str);
+
+	segcfg = read_c0_segctl1();
+	build_segment_config(str, segcfg);
+	seq_printf(m, "   2      a0000000   512M      %s", str);
+
+	segcfg >>= 16;
+	build_segment_config(str, segcfg);
+	seq_printf(m, "   3      80000000   512M      %s", str);
+
+	segcfg = read_c0_segctl2();
+	build_segment_config(str, segcfg);
+	seq_printf(m, "   4      40000000    1G       %s", str);
+
+	segcfg >>= 16;
+	build_segment_config(str, segcfg);
+	seq_printf(m, "   5      00000000    1G       %s\n", str);
+
+	return 0;
+}
+
+static int segments_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, show_segments, NULL);
+}
+
+static const struct file_operations segments_fops = {
+	.open		= segments_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init segments_info(void)
+{
+	extern struct dentry *mips_debugfs_dir;
+	struct dentry *segments;
+
+	if (cpu_has_segments) {
+		if (!mips_debugfs_dir)
+			return -ENODEV;
+
+		segments = debugfs_create_file("segments", S_IRUGO,
+					       mips_debugfs_dir, NULL,
+					       &segments_fops);
+		if (!segments)
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+device_initcall(segments_info);
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
new file mode 100644
index 000000000..be73c4911
--- /dev/null
+++ b/arch/mips/kernel/setup.c
@@ -0,0 +1,807 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Copyright (C) 1995 Waldorf Electronics
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03  Ralf Baechle
+ * Copyright (C) 1996 Stoned Elipot
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2000, 2001, 2002, 2007	 Maciej W. Rozycki
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/export.h>
+#include <linux/screen_info.h>
+#include <linux/memblock.h>
+#include <linux/bootmem.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
+#include <linux/highmem.h>
+#include <linux/console.h>
+#include <linux/pfn.h>
+#include <linux/debugfs.h>
+#include <linux/kexec.h>
+#include <linux/sizes.h>
+#include <linux/device.h>
+#include <linux/dma-contiguous.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/bugs.h>
+#include <asm/cache.h>
+#include <asm/cdmm.h>
+#include <asm/cpu.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/smp-ops.h>
+#include <asm/prom.h>
+
+struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
+
+EXPORT_SYMBOL(cpu_data);
+
+#ifdef CONFIG_VT
+struct screen_info screen_info;
+#endif
+
+/*
+ * Despite it's name this variable is even if we don't have PCI
+ */
+unsigned int PCI_DMA_BUS_IS_PHYS;
+
+EXPORT_SYMBOL(PCI_DMA_BUS_IS_PHYS);
+
+/*
+ * Setup information
+ *
+ * These are initialized so they are in the .data section
+ */
+unsigned long mips_machtype __read_mostly = MACH_UNKNOWN;
+
+EXPORT_SYMBOL(mips_machtype);
+
+struct boot_mem_map boot_mem_map;
+
+static char __initdata command_line[COMMAND_LINE_SIZE];
+char __initdata arcs_cmdline[COMMAND_LINE_SIZE];
+
+#ifdef CONFIG_CMDLINE_BOOL
+static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
+#endif
+
+/*
+ * mips_io_port_base is the begin of the address space to which x86 style
+ * I/O ports are mapped.
+ */
+const unsigned long mips_io_port_base = -1;
+EXPORT_SYMBOL(mips_io_port_base);
+
+static struct resource code_resource = { .name = "Kernel code", };
+static struct resource data_resource = { .name = "Kernel data", };
+
+static void *detect_magic __initdata = detect_memory_region;
+
+void __init add_memory_region(phys_addr_t start, phys_addr_t size, long type)
+{
+	int x = boot_mem_map.nr_map;
+	int i;
+
+	/* Sanity check */
+	if (start + size < start) {
+		pr_warn("Trying to add an invalid memory region, skipped\n");
+		return;
+	}
+
+	/*
+	 * Try to merge with existing entry, if any.
+	 */
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+		unsigned long top;
+
+		if (entry->type != type)
+			continue;
+
+		if (start + size < entry->addr)
+			continue;			/* no overlap */
+
+		if (entry->addr + entry->size < start)
+			continue;			/* no overlap */
+
+		top = max(entry->addr + entry->size, start + size);
+		entry->addr = min(entry->addr, start);
+		entry->size = top - entry->addr;
+
+		return;
+	}
+
+	if (boot_mem_map.nr_map == BOOT_MEM_MAP_MAX) {
+		pr_err("Ooops! Too many entries in the memory map!\n");
+		return;
+	}
+
+	boot_mem_map.map[x].addr = start;
+	boot_mem_map.map[x].size = size;
+	boot_mem_map.map[x].type = type;
+	boot_mem_map.nr_map++;
+}
+
+void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max)
+{
+	void *dm = &detect_magic;
+	phys_addr_t size;
+
+	for (size = sz_min; size < sz_max; size <<= 1) {
+		if (!memcmp(dm, dm + size, sizeof(detect_magic)))
+			break;
+	}
+
+	pr_debug("Memory: %lluMB of RAM detected at 0x%llx (min: %lluMB, max: %lluMB)\n",
+		((unsigned long long) size) / SZ_1M,
+		(unsigned long long) start,
+		((unsigned long long) sz_min) / SZ_1M,
+		((unsigned long long) sz_max) / SZ_1M);
+
+	add_memory_region(start, size, BOOT_MEM_RAM);
+}
+
+static void __init print_memory_map(void)
+{
+	int i;
+	const int field = 2 * sizeof(unsigned long);
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		printk(KERN_INFO " memory: %0*Lx @ %0*Lx ",
+		       field, (unsigned long long) boot_mem_map.map[i].size,
+		       field, (unsigned long long) boot_mem_map.map[i].addr);
+
+		switch (boot_mem_map.map[i].type) {
+		case BOOT_MEM_RAM:
+			printk(KERN_CONT "(usable)\n");
+			break;
+		case BOOT_MEM_INIT_RAM:
+			printk(KERN_CONT "(usable after init)\n");
+			break;
+		case BOOT_MEM_ROM_DATA:
+			printk(KERN_CONT "(ROM data)\n");
+			break;
+		case BOOT_MEM_RESERVED:
+			printk(KERN_CONT "(reserved)\n");
+			break;
+		default:
+			printk(KERN_CONT "type %lu\n", boot_mem_map.map[i].type);
+			break;
+		}
+	}
+}
+
+/*
+ * Manage initrd
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+
+static int __init rd_start_early(char *p)
+{
+	unsigned long start = memparse(p, &p);
+
+#ifdef CONFIG_64BIT
+	/* Guess if the sign extension was forgotten by bootloader */
+	if (start < XKPHYS)
+		start = (int)start;
+#endif
+	initrd_start = start;
+	initrd_end += start;
+	return 0;
+}
+early_param("rd_start", rd_start_early);
+
+static int __init rd_size_early(char *p)
+{
+	initrd_end += memparse(p, &p);
+	return 0;
+}
+early_param("rd_size", rd_size_early);
+
+/* it returns the next free pfn after initrd */
+static unsigned long __init init_initrd(void)
+{
+	unsigned long end;
+
+	/*
+	 * Board specific code or command line parser should have
+	 * already set up initrd_start and initrd_end. In these cases
+	 * perfom sanity checks and use them if all looks good.
+	 */
+	if (!initrd_start || initrd_end <= initrd_start)
+		goto disable;
+
+	if (initrd_start & ~PAGE_MASK) {
+		pr_err("initrd start must be page aligned\n");
+		goto disable;
+	}
+	if (initrd_start < PAGE_OFFSET) {
+		pr_err("initrd start < PAGE_OFFSET\n");
+		goto disable;
+	}
+
+	/*
+	 * Sanitize initrd addresses. For example firmware
+	 * can't guess if they need to pass them through
+	 * 64-bits values if the kernel has been built in pure
+	 * 32-bit. We need also to switch from KSEG0 to XKPHYS
+	 * addresses now, so the code can now safely use __pa().
+	 */
+	end = __pa(initrd_end);
+	initrd_end = (unsigned long)__va(end);
+	initrd_start = (unsigned long)__va(__pa(initrd_start));
+
+	ROOT_DEV = Root_RAM0;
+	return PFN_UP(end);
+disable:
+	initrd_start = 0;
+	initrd_end = 0;
+	return 0;
+}
+
+static void __init finalize_initrd(void)
+{
+	unsigned long size = initrd_end - initrd_start;
+
+	if (size == 0) {
+		printk(KERN_INFO "Initrd not found or empty");
+		goto disable;
+	}
+	if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
+		printk(KERN_ERR "Initrd extends beyond end of memory");
+		goto disable;
+	}
+
+	reserve_bootmem(__pa(initrd_start), size, BOOTMEM_DEFAULT);
+	initrd_below_start_ok = 1;
+
+	pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n",
+		initrd_start, size);
+	return;
+disable:
+	printk(KERN_CONT " - disabling initrd\n");
+	initrd_start = 0;
+	initrd_end = 0;
+}
+
+#else  /* !CONFIG_BLK_DEV_INITRD */
+
+static unsigned long __init init_initrd(void)
+{
+	return 0;
+}
+
+#define finalize_initrd()	do {} while (0)
+
+#endif
+
+/*
+ * Initialize the bootmem allocator. It also setup initrd related data
+ * if needed.
+ */
+#if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_NUMA))
+
+static void __init bootmem_init(void)
+{
+	init_initrd();
+	finalize_initrd();
+}
+
+#else  /* !CONFIG_SGI_IP27 */
+
+static void __init bootmem_init(void)
+{
+	unsigned long reserved_end;
+	unsigned long mapstart = ~0UL;
+	unsigned long bootmap_size;
+	int i;
+
+	/*
+	 * Sanity check any INITRD first. We don't take it into account
+	 * for bootmem setup initially, rely on the end-of-kernel-code
+	 * as our memory range starting point. Once bootmem is inited we
+	 * will reserve the area used for the initrd.
+	 */
+	init_initrd();
+	reserved_end = (unsigned long) PFN_UP(__pa_symbol(&_end));
+
+	/*
+	 * max_low_pfn is not a number of pages. The number of pages
+	 * of the system is given by 'max_low_pfn - min_low_pfn'.
+	 */
+	min_low_pfn = ~0UL;
+	max_low_pfn = 0;
+
+	/*
+	 * Find the highest page frame number we have available.
+	 */
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		unsigned long start, end;
+
+		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
+			continue;
+
+		start = PFN_UP(boot_mem_map.map[i].addr);
+		end = PFN_DOWN(boot_mem_map.map[i].addr
+				+ boot_mem_map.map[i].size);
+
+		if (end > max_low_pfn)
+			max_low_pfn = end;
+		if (start < min_low_pfn)
+			min_low_pfn = start;
+		if (end <= reserved_end)
+			continue;
+		if (start >= mapstart)
+			continue;
+		mapstart = max(reserved_end, start);
+	}
+
+	if (min_low_pfn >= max_low_pfn)
+		panic("Incorrect memory mapping !!!");
+	if (min_low_pfn > ARCH_PFN_OFFSET) {
+		pr_info("Wasting %lu bytes for tracking %lu unused pages\n",
+			(min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
+			min_low_pfn - ARCH_PFN_OFFSET);
+	} else if (min_low_pfn < ARCH_PFN_OFFSET) {
+		pr_info("%lu free pages won't be used\n",
+			ARCH_PFN_OFFSET - min_low_pfn);
+	}
+	min_low_pfn = ARCH_PFN_OFFSET;
+
+	/*
+	 * Determine low and high memory ranges
+	 */
+	max_pfn = max_low_pfn;
+	if (max_low_pfn > PFN_DOWN(HIGHMEM_START)) {
+#ifdef CONFIG_HIGHMEM
+		highstart_pfn = PFN_DOWN(HIGHMEM_START);
+		highend_pfn = max_low_pfn;
+#endif
+		max_low_pfn = PFN_DOWN(HIGHMEM_START);
+	}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/*
+	 * mapstart should be after initrd_end
+	 */
+	if (initrd_end)
+		mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end)));
+#endif
+
+	/*
+	 * Initialize the boot-time allocator with low memory only.
+	 */
+	bootmap_size = init_bootmem_node(NODE_DATA(0), mapstart,
+					 min_low_pfn, max_low_pfn);
+
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		unsigned long start, end;
+
+		start = PFN_UP(boot_mem_map.map[i].addr);
+		end = PFN_DOWN(boot_mem_map.map[i].addr
+				+ boot_mem_map.map[i].size);
+
+		if (start <= min_low_pfn)
+			start = min_low_pfn;
+		if (start >= end)
+			continue;
+
+#ifndef CONFIG_HIGHMEM
+		if (end > max_low_pfn)
+			end = max_low_pfn;
+
+		/*
+		 * ... finally, is the area going away?
+		 */
+		if (end <= start)
+			continue;
+#endif
+
+		memblock_add_node(PFN_PHYS(start), PFN_PHYS(end - start), 0);
+	}
+
+	/*
+	 * Register fully available low RAM pages with the bootmem allocator.
+	 */
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		unsigned long start, end, size;
+
+		start = PFN_UP(boot_mem_map.map[i].addr);
+		end   = PFN_DOWN(boot_mem_map.map[i].addr
+				    + boot_mem_map.map[i].size);
+
+		/*
+		 * Reserve usable memory.
+		 */
+		switch (boot_mem_map.map[i].type) {
+		case BOOT_MEM_RAM:
+			break;
+		case BOOT_MEM_INIT_RAM:
+			memory_present(0, start, end);
+			continue;
+		default:
+			/* Not usable memory */
+			continue;
+		}
+
+		/*
+		 * We are rounding up the start address of usable memory
+		 * and at the end of the usable range downwards.
+		 */
+		if (start >= max_low_pfn)
+			continue;
+		if (start < reserved_end)
+			start = reserved_end;
+		if (end > max_low_pfn)
+			end = max_low_pfn;
+
+		/*
+		 * ... finally, is the area going away?
+		 */
+		if (end <= start)
+			continue;
+		size = end - start;
+
+		/* Register lowmem ranges */
+		free_bootmem(PFN_PHYS(start), size << PAGE_SHIFT);
+		memory_present(0, start, end);
+	}
+
+	/*
+	 * Reserve the bootmap memory.
+	 */
+	reserve_bootmem(PFN_PHYS(mapstart), bootmap_size, BOOTMEM_DEFAULT);
+
+	/*
+	 * Reserve initrd memory if needed.
+	 */
+	finalize_initrd();
+}
+
+#endif	/* CONFIG_SGI_IP27 */
+
+/*
+ * arch_mem_init - initialize memory management subsystem
+ *
+ *  o plat_mem_setup() detects the memory configuration and will record detected
+ *    memory areas using add_memory_region.
+ *
+ * At this stage the memory configuration of the system is known to the
+ * kernel but generic memory management system is still entirely uninitialized.
+ *
+ *  o bootmem_init()
+ *  o sparse_init()
+ *  o paging_init()
+ *  o dma_continguous_reserve()
+ *
+ * At this stage the bootmem allocator is ready to use.
+ *
+ * NOTE: historically plat_mem_setup did the entire platform initialization.
+ *	 This was rather impractical because it meant plat_mem_setup had to
+ * get away without any kind of memory allocator.  To keep old code from
+ * breaking plat_setup was just renamed to plat_mem_setup and a second platform
+ * initialization hook for anything else was introduced.
+ */
+
+static int usermem __initdata;
+
+static int __init early_parse_mem(char *p)
+{
+	phys_addr_t start, size;
+
+	/*
+	 * If a user specifies memory size, we
+	 * blow away any automatically generated
+	 * size.
+	 */
+	if (usermem == 0) {
+		boot_mem_map.nr_map = 0;
+		usermem = 1;
+	}
+	start = 0;
+	size = memparse(p, &p);
+	if (*p == '@')
+		start = memparse(p + 1, &p);
+
+	add_memory_region(start, size, BOOT_MEM_RAM);
+	return 0;
+}
+early_param("mem", early_parse_mem);
+
+#ifdef CONFIG_PROC_VMCORE
+unsigned long setup_elfcorehdr, setup_elfcorehdr_size;
+static int __init early_parse_elfcorehdr(char *p)
+{
+	int i;
+
+	setup_elfcorehdr = memparse(p, &p);
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		unsigned long start = boot_mem_map.map[i].addr;
+		unsigned long end = (boot_mem_map.map[i].addr +
+				     boot_mem_map.map[i].size);
+		if (setup_elfcorehdr >= start && setup_elfcorehdr < end) {
+			/*
+			 * Reserve from the elf core header to the end of
+			 * the memory segment, that should all be kdump
+			 * reserved memory.
+			 */
+			setup_elfcorehdr_size = end - setup_elfcorehdr;
+			break;
+		}
+	}
+	/*
+	 * If we don't find it in the memory map, then we shouldn't
+	 * have to worry about it, as the new kernel won't use it.
+	 */
+	return 0;
+}
+early_param("elfcorehdr", early_parse_elfcorehdr);
+#endif
+
+static void __init arch_mem_addpart(phys_addr_t mem, phys_addr_t end, int type)
+{
+	phys_addr_t size;
+	int i;
+
+	size = end - mem;
+	if (!size)
+		return;
+
+	/* Make sure it is in the boot_mem_map */
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		if (mem >= boot_mem_map.map[i].addr &&
+		    mem < (boot_mem_map.map[i].addr +
+			   boot_mem_map.map[i].size))
+			return;
+	}
+	add_memory_region(mem, size, type);
+}
+
+#ifdef CONFIG_KEXEC
+static inline unsigned long long get_total_mem(void)
+{
+	unsigned long long total;
+
+	total = max_pfn - min_low_pfn;
+	return total << PAGE_SHIFT;
+}
+
+static void __init mips_parse_crashkernel(void)
+{
+	unsigned long long total_mem;
+	unsigned long long crash_size, crash_base;
+	int ret;
+
+	total_mem = get_total_mem();
+	ret = parse_crashkernel(boot_command_line, total_mem,
+				&crash_size, &crash_base);
+	if (ret != 0 || crash_size <= 0)
+		return;
+
+	crashk_res.start = crash_base;
+	crashk_res.end	 = crash_base + crash_size - 1;
+}
+
+static void __init request_crashkernel(struct resource *res)
+{
+	int ret;
+
+	ret = request_resource(res, &crashk_res);
+	if (!ret)
+		pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n",
+			(unsigned long)((crashk_res.end -
+					 crashk_res.start + 1) >> 20),
+			(unsigned long)(crashk_res.start  >> 20));
+}
+#else /* !defined(CONFIG_KEXEC)		*/
+static void __init mips_parse_crashkernel(void)
+{
+}
+
+static void __init request_crashkernel(struct resource *res)
+{
+}
+#endif /* !defined(CONFIG_KEXEC)  */
+
+static void __init arch_mem_init(char **cmdline_p)
+{
+	struct memblock_region *reg;
+	extern void plat_mem_setup(void);
+
+	/* call board setup routine */
+	plat_mem_setup();
+
+	/*
+	 * Make sure all kernel memory is in the maps.  The "UP" and
+	 * "DOWN" are opposite for initdata since if it crosses over
+	 * into another memory section you don't want that to be
+	 * freed when the initdata is freed.
+	 */
+	arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
+			 PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
+			 BOOT_MEM_RAM);
+	arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
+			 PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
+			 BOOT_MEM_INIT_RAM);
+
+	pr_info("Determined physical RAM map:\n");
+	print_memory_map();
+
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+	if (builtin_cmdline[0]) {
+		strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
+		strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE);
+	}
+	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+#endif
+#else
+	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+#endif
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+
+	*cmdline_p = command_line;
+
+	parse_early_param();
+
+	if (usermem) {
+		pr_info("User-defined physical RAM map:\n");
+		print_memory_map();
+	}
+
+	bootmem_init();
+#ifdef CONFIG_PROC_VMCORE
+	if (setup_elfcorehdr && setup_elfcorehdr_size) {
+		printk(KERN_INFO "kdump reserved memory at %lx-%lx\n",
+		       setup_elfcorehdr, setup_elfcorehdr_size);
+		reserve_bootmem(setup_elfcorehdr, setup_elfcorehdr_size,
+				BOOTMEM_DEFAULT);
+	}
+#endif
+
+	mips_parse_crashkernel();
+#ifdef CONFIG_KEXEC
+	if (crashk_res.start != crashk_res.end)
+		reserve_bootmem(crashk_res.start,
+				crashk_res.end - crashk_res.start + 1,
+				BOOTMEM_DEFAULT);
+#endif
+	device_tree_init();
+	sparse_init();
+	plat_swiotlb_setup();
+	paging_init();
+
+	dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
+	/* Tell bootmem about cma reserved memblock section */
+	for_each_memblock(reserved, reg)
+		if (reg->size != 0)
+			reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
+}
+
+static void __init resource_init(void)
+{
+	int i;
+
+	if (UNCAC_BASE != IO_BASE)
+		return;
+
+	code_resource.start = __pa_symbol(&_text);
+	code_resource.end = __pa_symbol(&_etext) - 1;
+	data_resource.start = __pa_symbol(&_etext);
+	data_resource.end = __pa_symbol(&_edata) - 1;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		struct resource *res;
+		unsigned long start, end;
+
+		start = boot_mem_map.map[i].addr;
+		end = boot_mem_map.map[i].addr + boot_mem_map.map[i].size - 1;
+		if (start >= HIGHMEM_START)
+			continue;
+		if (end >= HIGHMEM_START)
+			end = HIGHMEM_START - 1;
+
+		res = alloc_bootmem(sizeof(struct resource));
+		switch (boot_mem_map.map[i].type) {
+		case BOOT_MEM_RAM:
+		case BOOT_MEM_INIT_RAM:
+		case BOOT_MEM_ROM_DATA:
+			res->name = "System RAM";
+			break;
+		case BOOT_MEM_RESERVED:
+		default:
+			res->name = "reserved";
+		}
+
+		res->start = start;
+		res->end = end;
+
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		request_resource(&iomem_resource, res);
+
+		/*
+		 *  We don't know which RAM region contains kernel data,
+		 *  so we try it repeatedly and let the resource manager
+		 *  test it.
+		 */
+		request_resource(res, &code_resource);
+		request_resource(res, &data_resource);
+		request_crashkernel(res);
+	}
+}
+
+#ifdef CONFIG_SMP
+static void __init prefill_possible_map(void)
+{
+	int i, possible = num_possible_cpus();
+
+	if (possible > nr_cpu_ids)
+		possible = nr_cpu_ids;
+
+	for (i = 0; i < possible; i++)
+		set_cpu_possible(i, true);
+	for (; i < NR_CPUS; i++)
+		set_cpu_possible(i, false);
+
+	nr_cpu_ids = possible;
+}
+#else
+static inline void prefill_possible_map(void) {}
+#endif
+
+void __init setup_arch(char **cmdline_p)
+{
+	cpu_probe();
+	prom_init();
+
+	setup_early_fdc_console();
+#ifdef CONFIG_EARLY_PRINTK
+	setup_early_printk();
+#endif
+	cpu_report();
+	check_bugs_early();
+
+#if defined(CONFIG_VT)
+#if defined(CONFIG_VGA_CONSOLE)
+	conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+
+	arch_mem_init(cmdline_p);
+
+	resource_init();
+	plat_smp_setup();
+	prefill_possible_map();
+
+	cpu_cache_init();
+}
+
+unsigned long kernelsp[NR_CPUS];
+unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
+
+#ifdef CONFIG_DEBUG_FS
+struct dentry *mips_debugfs_dir;
+static int __init debugfs_mips(void)
+{
+	struct dentry *d;
+
+	d = debugfs_create_dir("mips", NULL);
+	if (!d)
+		return -ENOMEM;
+	mips_debugfs_dir = d;
+	return 0;
+}
+arch_initcall(debugfs_mips);
+#endif
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
new file mode 100644
index 000000000..06805e09b
--- /dev/null
+++ b/arch/mips/kernel/signal-common.h
@@ -0,0 +1,39 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1991, 1992  Linus Torvalds
+ * Copyright (C) 1994 - 2000  Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+
+#ifndef __SIGNAL_COMMON_H
+#define __SIGNAL_COMMON_H
+
+/* #define DEBUG_SIG */
+
+#ifdef DEBUG_SIG
+#  define DEBUGP(fmt, args...) printk("%s: " fmt, __func__, ##args)
+#else
+#  define DEBUGP(fmt, args...)
+#endif
+
+/*
+ * Determine which stack to use..
+ */
+extern void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
+				 size_t frame_size);
+/* Check and clear pending FPU exceptions in saved CSR */
+extern int fpcsr_pending(unsigned int __user *fpcsr);
+
+/* Make sure we will not lose FPU ownership */
+#ifdef CONFIG_PREEMPT
+#define lock_fpu_owner()	preempt_disable()
+#define unlock_fpu_owner()	preempt_enable()
+#else
+#define lock_fpu_owner()	pagefault_disable()
+#define unlock_fpu_owner()	pagefault_enable()
+#endif
+
+#endif	/* __SIGNAL_COMMON_H */
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
new file mode 100644
index 000000000..6a28c792d
--- /dev/null
+++ b/arch/mips/kernel/signal.c
@@ -0,0 +1,673 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1991, 1992  Linus Torvalds
+ * Copyright (C) 1994 - 2000  Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2014, Imagination Technologies Ltd.
+ */
+#include <linux/cache.h>
+#include <linux/context_tracking.h>
+#include <linux/irqflags.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/personality.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/compiler.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/tracehook.h>
+
+#include <asm/abi.h>
+#include <asm/asm.h>
+#include <linux/bitops.h>
+#include <asm/cacheflush.h>
+#include <asm/fpu.h>
+#include <asm/sim.h>
+#include <asm/ucontext.h>
+#include <asm/cpu-features.h>
+#include <asm/war.h>
+#include <asm/vdso.h>
+#include <asm/dsp.h>
+#include <asm/inst.h>
+
+#include "signal-common.h"
+
+static int (*save_fp_context)(struct sigcontext __user *sc);
+static int (*restore_fp_context)(struct sigcontext __user *sc);
+
+extern asmlinkage int _save_fp_context(struct sigcontext __user *sc);
+extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc);
+
+struct sigframe {
+	u32 sf_ass[4];		/* argument save space for o32 */
+	u32 sf_pad[2];		/* Was: signal trampoline */
+	struct sigcontext sf_sc;
+	sigset_t sf_mask;
+};
+
+struct rt_sigframe {
+	u32 rs_ass[4];		/* argument save space for o32 */
+	u32 rs_pad[2];		/* Was: signal trampoline */
+	struct siginfo rs_info;
+	struct ucontext rs_uc;
+};
+
+/*
+ * Thread saved context copy to/from a signal context presumed to be on the
+ * user stack, and therefore accessed with appropriate macros from uaccess.h.
+ */
+static int copy_fp_to_sigcontext(struct sigcontext __user *sc)
+{
+	int i;
+	int err = 0;
+
+	for (i = 0; i < NUM_FPU_REGS; i++) {
+		err |=
+		    __put_user(get_fpr64(&current->thread.fpu.fpr[i], 0),
+			       &sc->sc_fpregs[i]);
+	}
+	err |= __put_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
+
+	return err;
+}
+
+static int copy_fp_from_sigcontext(struct sigcontext __user *sc)
+{
+	int i;
+	int err = 0;
+	u64 fpr_val;
+
+	for (i = 0; i < NUM_FPU_REGS; i++) {
+		err |= __get_user(fpr_val, &sc->sc_fpregs[i]);
+		set_fpr64(&current->thread.fpu.fpr[i], 0, fpr_val);
+	}
+	err |= __get_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
+
+	return err;
+}
+
+/*
+ * Helper routines
+ */
+static int protected_save_fp_context(struct sigcontext __user *sc)
+{
+	int err;
+#ifndef CONFIG_EVA
+	while (1) {
+		lock_fpu_owner();
+		if (is_fpu_owner()) {
+			err = save_fp_context(sc);
+			unlock_fpu_owner();
+		} else {
+			unlock_fpu_owner();
+			err = copy_fp_to_sigcontext(sc);
+		}
+		if (likely(!err))
+			break;
+		/* touch the sigcontext and try again */
+		err = __put_user(0, &sc->sc_fpregs[0]) |
+			__put_user(0, &sc->sc_fpregs[31]) |
+			__put_user(0, &sc->sc_fpc_csr);
+		if (err)
+			break;	/* really bad sigcontext */
+	}
+#else
+	/*
+	 * EVA does not have FPU EVA instructions so saving fpu context directly
+	 * does not work.
+	 */
+	lose_fpu(1);
+	err = save_fp_context(sc); /* this might fail */
+#endif
+	return err;
+}
+
+static int protected_restore_fp_context(struct sigcontext __user *sc)
+{
+	int err, tmp __maybe_unused;
+#ifndef CONFIG_EVA
+	while (1) {
+		lock_fpu_owner();
+		if (is_fpu_owner()) {
+			err = restore_fp_context(sc);
+			unlock_fpu_owner();
+		} else {
+			unlock_fpu_owner();
+			err = copy_fp_from_sigcontext(sc);
+		}
+		if (likely(!err))
+			break;
+		/* touch the sigcontext and try again */
+		err = __get_user(tmp, &sc->sc_fpregs[0]) |
+			__get_user(tmp, &sc->sc_fpregs[31]) |
+			__get_user(tmp, &sc->sc_fpc_csr);
+		if (err)
+			break;	/* really bad sigcontext */
+	}
+#else
+	/*
+	 * EVA does not have FPU EVA instructions so restoring fpu context
+	 * directly does not work.
+	 */
+	lose_fpu(0);
+	err = restore_fp_context(sc); /* this might fail */
+#endif
+	return err;
+}
+
+int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	int err = 0;
+	int i;
+	unsigned int used_math;
+
+	err |= __put_user(regs->cp0_epc, &sc->sc_pc);
+
+	err |= __put_user(0, &sc->sc_regs[0]);
+	for (i = 1; i < 32; i++)
+		err |= __put_user(regs->regs[i], &sc->sc_regs[i]);
+
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	err |= __put_user(regs->acx, &sc->sc_acx);
+#endif
+	err |= __put_user(regs->hi, &sc->sc_mdhi);
+	err |= __put_user(regs->lo, &sc->sc_mdlo);
+	if (cpu_has_dsp) {
+		err |= __put_user(mfhi1(), &sc->sc_hi1);
+		err |= __put_user(mflo1(), &sc->sc_lo1);
+		err |= __put_user(mfhi2(), &sc->sc_hi2);
+		err |= __put_user(mflo2(), &sc->sc_lo2);
+		err |= __put_user(mfhi3(), &sc->sc_hi3);
+		err |= __put_user(mflo3(), &sc->sc_lo3);
+		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
+	}
+
+	used_math = !!used_math();
+	err |= __put_user(used_math, &sc->sc_used_math);
+
+	if (used_math) {
+		/*
+		 * Save FPU state to signal context. Signal handler
+		 * will "inherit" current FPU state.
+		 */
+		err |= protected_save_fp_context(sc);
+	}
+	return err;
+}
+
+int fpcsr_pending(unsigned int __user *fpcsr)
+{
+	int err, sig = 0;
+	unsigned int csr, enabled;
+
+	err = __get_user(csr, fpcsr);
+	enabled = FPU_CSR_UNI_X | ((csr & FPU_CSR_ALL_E) << 5);
+	/*
+	 * If the signal handler set some FPU exceptions, clear it and
+	 * send SIGFPE.
+	 */
+	if (csr & enabled) {
+		csr &= ~enabled;
+		err |= __put_user(csr, fpcsr);
+		sig = SIGFPE;
+	}
+	return err ?: sig;
+}
+
+static int
+check_and_restore_fp_context(struct sigcontext __user *sc)
+{
+	int err, sig;
+
+	err = sig = fpcsr_pending(&sc->sc_fpc_csr);
+	if (err > 0)
+		err = 0;
+	err |= protected_restore_fp_context(sc);
+	return err ?: sig;
+}
+
+int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	unsigned int used_math;
+	unsigned long treg;
+	int err = 0;
+	int i;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
+
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	err |= __get_user(regs->acx, &sc->sc_acx);
+#endif
+	err |= __get_user(regs->hi, &sc->sc_mdhi);
+	err |= __get_user(regs->lo, &sc->sc_mdlo);
+	if (cpu_has_dsp) {
+		err |= __get_user(treg, &sc->sc_hi1); mthi1(treg);
+		err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg);
+		err |= __get_user(treg, &sc->sc_hi2); mthi2(treg);
+		err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg);
+		err |= __get_user(treg, &sc->sc_hi3); mthi3(treg);
+		err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
+		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+	}
+
+	for (i = 1; i < 32; i++)
+		err |= __get_user(regs->regs[i], &sc->sc_regs[i]);
+
+	err |= __get_user(used_math, &sc->sc_used_math);
+	conditional_used_math(used_math);
+
+	if (used_math) {
+		/* restore fpu context if we have used it before */
+		if (!err)
+			err = check_and_restore_fp_context(sc);
+	} else {
+		/* signal handler may have used FPU.  Give it up. */
+		lose_fpu(0);
+	}
+
+	return err;
+}
+
+void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
+			  size_t frame_size)
+{
+	unsigned long sp;
+
+	/* Default to using normal stack */
+	sp = regs->regs[29];
+
+	/*
+	 * FPU emulator may have it's own trampoline active just
+	 * above the user stack, 16-bytes before the next lowest
+	 * 16 byte boundary.  Try to avoid trashing it.
+	 */
+	sp -= 32;
+
+	sp = sigsp(sp, ksig);
+
+	return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? ~(cpu_icache_line_size()-1) : ALMASK));
+}
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+
+#ifdef CONFIG_TRAD_SIGNALS
+SYSCALL_DEFINE1(sigsuspend, sigset_t __user *, uset)
+{
+	return sys_rt_sigsuspend(uset, sizeof(sigset_t));
+}
+#endif
+
+#ifdef CONFIG_TRAD_SIGNALS
+SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act,
+	struct sigaction __user *, oact)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+	int err = 0;
+
+	if (act) {
+		old_sigset_t mask;
+
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
+			return -EFAULT;
+		err |= __get_user(new_ka.sa.sa_handler, &act->sa_handler);
+		err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+		err |= __get_user(mask, &act->sa_mask.sig[0]);
+		if (err)
+			return -EFAULT;
+
+		siginitset(&new_ka.sa.sa_mask, mask);
+	}
+
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+	if (!ret && oact) {
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
+			return -EFAULT;
+		err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+		err |= __put_user(old_ka.sa.sa_handler, &oact->sa_handler);
+		err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig);
+		err |= __put_user(0, &oact->sa_mask.sig[1]);
+		err |= __put_user(0, &oact->sa_mask.sig[2]);
+		err |= __put_user(0, &oact->sa_mask.sig[3]);
+		if (err)
+			return -EFAULT;
+	}
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_TRAD_SIGNALS
+asmlinkage void sys_sigreturn(nabi_no_regargs struct pt_regs regs)
+{
+	struct sigframe __user *frame;
+	sigset_t blocked;
+	int sig;
+
+	frame = (struct sigframe __user *) regs.regs[29];
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked)))
+		goto badframe;
+
+	set_current_blocked(&blocked);
+
+	sig = restore_sigcontext(&regs, &frame->sf_sc);
+	if (sig < 0)
+		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	__asm__ __volatile__(
+		"move\t$29, %0\n\t"
+		"j\tsyscall_exit"
+		:/* no outputs */
+		:"r" (&regs));
+	/* Unreached */
+
+badframe:
+	force_sig(SIGSEGV, current);
+}
+#endif /* CONFIG_TRAD_SIGNALS */
+
+asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
+{
+	struct rt_sigframe __user *frame;
+	sigset_t set;
+	int sig;
+
+	frame = (struct rt_sigframe __user *) regs.regs[29];
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
+	if (sig < 0)
+		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
+
+	if (restore_altstack(&frame->rs_uc.uc_stack))
+		goto badframe;
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	__asm__ __volatile__(
+		"move\t$29, %0\n\t"
+		"j\tsyscall_exit"
+		:/* no outputs */
+		:"r" (&regs));
+	/* Unreached */
+
+badframe:
+	force_sig(SIGSEGV, current);
+}
+
+#ifdef CONFIG_TRAD_SIGNALS
+static int setup_frame(void *sig_return, struct ksignal *ksig,
+		       struct pt_regs *regs, sigset_t *set)
+{
+	struct sigframe __user *frame;
+	int err = 0;
+
+	frame = get_sigframe(ksig, regs, sizeof(*frame));
+	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
+		return -EFAULT;
+
+	err |= setup_sigcontext(regs, &frame->sf_sc);
+	err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set));
+	if (err)
+		return -EFAULT;
+
+	/*
+	 * Arguments to signal handler:
+	 *
+	 *   a0 = signal number
+	 *   a1 = 0 (should be cause)
+	 *   a2 = pointer to struct sigcontext
+	 *
+	 * $25 and c0_epc point to the signal handler, $29 points to the
+	 * struct sigframe.
+	 */
+	regs->regs[ 4] = ksig->sig;
+	regs->regs[ 5] = 0;
+	regs->regs[ 6] = (unsigned long) &frame->sf_sc;
+	regs->regs[29] = (unsigned long) frame;
+	regs->regs[31] = (unsigned long) sig_return;
+	regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler;
+
+	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
+	       current->comm, current->pid,
+	       frame, regs->cp0_epc, regs->regs[31]);
+	return 0;
+}
+#endif
+
+static int setup_rt_frame(void *sig_return, struct ksignal *ksig,
+			  struct pt_regs *regs, sigset_t *set)
+{
+	struct rt_sigframe __user *frame;
+	int err = 0;
+
+	frame = get_sigframe(ksig, regs, sizeof(*frame));
+	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
+		return -EFAULT;
+
+	/* Create siginfo.  */
+	err |= copy_siginfo_to_user(&frame->rs_info, &ksig->info);
+
+	/* Create the ucontext.	 */
+	err |= __put_user(0, &frame->rs_uc.uc_flags);
+	err |= __put_user(NULL, &frame->rs_uc.uc_link);
+	err |= __save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]);
+	err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext);
+	err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set));
+
+	if (err)
+		return -EFAULT;
+
+	/*
+	 * Arguments to signal handler:
+	 *
+	 *   a0 = signal number
+	 *   a1 = 0 (should be cause)
+	 *   a2 = pointer to ucontext
+	 *
+	 * $25 and c0_epc point to the signal handler, $29 points to
+	 * the struct rt_sigframe.
+	 */
+	regs->regs[ 4] = ksig->sig;
+	regs->regs[ 5] = (unsigned long) &frame->rs_info;
+	regs->regs[ 6] = (unsigned long) &frame->rs_uc;
+	regs->regs[29] = (unsigned long) frame;
+	regs->regs[31] = (unsigned long) sig_return;
+	regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler;
+
+	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
+	       current->comm, current->pid,
+	       frame, regs->cp0_epc, regs->regs[31]);
+
+	return 0;
+}
+
+struct mips_abi mips_abi = {
+#ifdef CONFIG_TRAD_SIGNALS
+	.setup_frame	= setup_frame,
+	.signal_return_offset = offsetof(struct mips_vdso, signal_trampoline),
+#endif
+	.setup_rt_frame = setup_rt_frame,
+	.rt_signal_return_offset =
+		offsetof(struct mips_vdso, rt_signal_trampoline),
+	.restart	= __NR_restart_syscall
+};
+
+static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+	sigset_t *oldset = sigmask_to_save();
+	int ret;
+	struct mips_abi *abi = current->thread.abi;
+#ifdef CONFIG_CPU_MICROMIPS
+	void *vdso;
+	unsigned long tmp = (unsigned long)current->mm->context.vdso;
+
+	set_isa16_mode(tmp);
+	vdso = (void *)tmp;
+#else
+	void *vdso = current->mm->context.vdso;
+#endif
+
+	if (regs->regs[0]) {
+		switch(regs->regs[2]) {
+		case ERESTART_RESTARTBLOCK:
+		case ERESTARTNOHAND:
+			regs->regs[2] = EINTR;
+			break;
+		case ERESTARTSYS:
+			if (!(ksig->ka.sa.sa_flags & SA_RESTART)) {
+				regs->regs[2] = EINTR;
+				break;
+			}
+		/* fallthrough */
+		case ERESTARTNOINTR:
+			regs->regs[7] = regs->regs[26];
+			regs->regs[2] = regs->regs[0];
+			regs->cp0_epc -= 4;
+		}
+
+		regs->regs[0] = 0;		/* Don't deal with this again.	*/
+	}
+
+	if (sig_uses_siginfo(&ksig->ka))
+		ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset,
+					  ksig, regs, oldset);
+	else
+		ret = abi->setup_frame(vdso + abi->signal_return_offset, ksig,
+				       regs, oldset);
+
+	signal_setup_done(ret, ksig, 0);
+}
+
+static void do_signal(struct pt_regs *regs)
+{
+	struct ksignal ksig;
+
+	if (get_signal(&ksig)) {
+		/* Whee!  Actually deliver the signal.	*/
+		handle_signal(&ksig, regs);
+		return;
+	}
+
+	if (regs->regs[0]) {
+		switch (regs->regs[2]) {
+		case ERESTARTNOHAND:
+		case ERESTARTSYS:
+		case ERESTARTNOINTR:
+			regs->regs[2] = regs->regs[0];
+			regs->regs[7] = regs->regs[26];
+			regs->cp0_epc -= 4;
+			break;
+
+		case ERESTART_RESTARTBLOCK:
+			regs->regs[2] = current->thread.abi->restart;
+			regs->regs[7] = regs->regs[26];
+			regs->cp0_epc -= 4;
+			break;
+		}
+		regs->regs[0] = 0;	/* Don't deal with this again.	*/
+	}
+
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back
+	 */
+	restore_saved_sigmask();
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by the TIF_WORK_MASK flags
+ */
+asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
+	__u32 thread_info_flags)
+{
+	local_irq_enable();
+
+	user_exit();
+
+	/* deal with pending signal delivery */
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal(regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+
+	user_enter();
+}
+
+#ifdef CONFIG_SMP
+#ifndef CONFIG_EVA
+static int smp_save_fp_context(struct sigcontext __user *sc)
+{
+	return raw_cpu_has_fpu
+	       ? _save_fp_context(sc)
+	       : copy_fp_to_sigcontext(sc);
+}
+
+static int smp_restore_fp_context(struct sigcontext __user *sc)
+{
+	return raw_cpu_has_fpu
+	       ? _restore_fp_context(sc)
+	       : copy_fp_from_sigcontext(sc);
+}
+#endif /* CONFIG_EVA */
+#endif
+
+static int signal_setup(void)
+{
+#ifndef CONFIG_EVA
+#ifdef CONFIG_SMP
+	/* For now just do the cpu_has_fpu check when the functions are invoked */
+	save_fp_context = smp_save_fp_context;
+	restore_fp_context = smp_restore_fp_context;
+#else
+	if (cpu_has_fpu) {
+		save_fp_context = _save_fp_context;
+		restore_fp_context = _restore_fp_context;
+	} else {
+		save_fp_context = copy_fp_to_sigcontext;
+		restore_fp_context = copy_fp_from_sigcontext;
+	}
+#endif /* CONFIG_SMP */
+#else
+	save_fp_context = copy_fp_to_sigcontext;
+	restore_fp_context = copy_fp_from_sigcontext;
+#endif
+
+	return 0;
+}
+
+arch_initcall(signal_setup);
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
new file mode 100644
index 000000000..19a7705f2
--- /dev/null
+++ b/arch/mips/kernel/signal32.c
@@ -0,0 +1,606 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1991, 1992  Linus Torvalds
+ * Copyright (C) 1994 - 2000, 2006  Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#include <linux/cache.h>
+#include <linux/compat.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/suspend.h>
+#include <linux/compiler.h>
+#include <linux/uaccess.h>
+
+#include <asm/abi.h>
+#include <asm/asm.h>
+#include <asm/compat-signal.h>
+#include <linux/bitops.h>
+#include <asm/cacheflush.h>
+#include <asm/sim.h>
+#include <asm/ucontext.h>
+#include <asm/fpu.h>
+#include <asm/war.h>
+#include <asm/vdso.h>
+#include <asm/dsp.h>
+
+#include "signal-common.h"
+
+static int (*save_fp_context32)(struct sigcontext32 __user *sc);
+static int (*restore_fp_context32)(struct sigcontext32 __user *sc);
+
+extern asmlinkage int _save_fp_context32(struct sigcontext32 __user *sc);
+extern asmlinkage int _restore_fp_context32(struct sigcontext32 __user *sc);
+
+/*
+ * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
+ */
+#define __NR_O32_restart_syscall	4253
+
+/* 32-bit compatibility types */
+
+typedef unsigned int __sighandler32_t;
+typedef void (*vfptr_t)(void);
+
+struct ucontext32 {
+	u32		    uc_flags;
+	s32		    uc_link;
+	compat_stack_t      uc_stack;
+	struct sigcontext32 uc_mcontext;
+	compat_sigset_t	    uc_sigmask;	  /* mask last for extensibility */
+};
+
+struct sigframe32 {
+	u32 sf_ass[4];		/* argument save space for o32 */
+	u32 sf_pad[2];		/* Was: signal trampoline */
+	struct sigcontext32 sf_sc;
+	compat_sigset_t sf_mask;
+};
+
+struct rt_sigframe32 {
+	u32 rs_ass[4];			/* argument save space for o32 */
+	u32 rs_pad[2];			/* Was: signal trampoline */
+	compat_siginfo_t rs_info;
+	struct ucontext32 rs_uc;
+};
+
+/*
+ * Thread saved context copy to/from a signal context presumed to be on the
+ * user stack, and therefore accessed with appropriate macros from uaccess.h.
+ */
+static int copy_fp_to_sigcontext32(struct sigcontext32 __user *sc)
+{
+	int i;
+	int err = 0;
+	int inc = test_thread_flag(TIF_32BIT_FPREGS) ? 2 : 1;
+
+	for (i = 0; i < NUM_FPU_REGS; i += inc) {
+		err |=
+		    __put_user(get_fpr64(&current->thread.fpu.fpr[i], 0),
+			       &sc->sc_fpregs[i]);
+	}
+	err |= __put_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
+
+	return err;
+}
+
+static int copy_fp_from_sigcontext32(struct sigcontext32 __user *sc)
+{
+	int i;
+	int err = 0;
+	int inc = test_thread_flag(TIF_32BIT_FPREGS) ? 2 : 1;
+	u64 fpr_val;
+
+	for (i = 0; i < NUM_FPU_REGS; i += inc) {
+		err |= __get_user(fpr_val, &sc->sc_fpregs[i]);
+		set_fpr64(&current->thread.fpu.fpr[i], 0, fpr_val);
+	}
+	err |= __get_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
+
+	return err;
+}
+
+/*
+ * sigcontext handlers
+ */
+static int protected_save_fp_context32(struct sigcontext32 __user *sc)
+{
+	int err;
+	while (1) {
+		lock_fpu_owner();
+		if (is_fpu_owner()) {
+			err = save_fp_context32(sc);
+			unlock_fpu_owner();
+		} else {
+			unlock_fpu_owner();
+			err = copy_fp_to_sigcontext32(sc);
+		}
+		if (likely(!err))
+			break;
+		/* touch the sigcontext and try again */
+		err = __put_user(0, &sc->sc_fpregs[0]) |
+			__put_user(0, &sc->sc_fpregs[31]) |
+			__put_user(0, &sc->sc_fpc_csr);
+		if (err)
+			break;	/* really bad sigcontext */
+	}
+	return err;
+}
+
+static int protected_restore_fp_context32(struct sigcontext32 __user *sc)
+{
+	int err, tmp __maybe_unused;
+	while (1) {
+		lock_fpu_owner();
+		if (is_fpu_owner()) {
+			err = restore_fp_context32(sc);
+			unlock_fpu_owner();
+		} else {
+			unlock_fpu_owner();
+			err = copy_fp_from_sigcontext32(sc);
+		}
+		if (likely(!err))
+			break;
+		/* touch the sigcontext and try again */
+		err = __get_user(tmp, &sc->sc_fpregs[0]) |
+			__get_user(tmp, &sc->sc_fpregs[31]) |
+			__get_user(tmp, &sc->sc_fpc_csr);
+		if (err)
+			break;	/* really bad sigcontext */
+	}
+	return err;
+}
+
+static int setup_sigcontext32(struct pt_regs *regs,
+			      struct sigcontext32 __user *sc)
+{
+	int err = 0;
+	int i;
+	u32 used_math;
+
+	err |= __put_user(regs->cp0_epc, &sc->sc_pc);
+
+	err |= __put_user(0, &sc->sc_regs[0]);
+	for (i = 1; i < 32; i++)
+		err |= __put_user(regs->regs[i], &sc->sc_regs[i]);
+
+	err |= __put_user(regs->hi, &sc->sc_mdhi);
+	err |= __put_user(regs->lo, &sc->sc_mdlo);
+	if (cpu_has_dsp) {
+		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
+		err |= __put_user(mfhi1(), &sc->sc_hi1);
+		err |= __put_user(mflo1(), &sc->sc_lo1);
+		err |= __put_user(mfhi2(), &sc->sc_hi2);
+		err |= __put_user(mflo2(), &sc->sc_lo2);
+		err |= __put_user(mfhi3(), &sc->sc_hi3);
+		err |= __put_user(mflo3(), &sc->sc_lo3);
+	}
+
+	used_math = !!used_math();
+	err |= __put_user(used_math, &sc->sc_used_math);
+
+	if (used_math) {
+		/*
+		 * Save FPU state to signal context.  Signal handler
+		 * will "inherit" current FPU state.
+		 */
+		err |= protected_save_fp_context32(sc);
+	}
+	return err;
+}
+
+static int
+check_and_restore_fp_context32(struct sigcontext32 __user *sc)
+{
+	int err, sig;
+
+	err = sig = fpcsr_pending(&sc->sc_fpc_csr);
+	if (err > 0)
+		err = 0;
+	err |= protected_restore_fp_context32(sc);
+	return err ?: sig;
+}
+
+static int restore_sigcontext32(struct pt_regs *regs,
+				struct sigcontext32 __user *sc)
+{
+	u32 used_math;
+	int err = 0;
+	s32 treg;
+	int i;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
+	err |= __get_user(regs->hi, &sc->sc_mdhi);
+	err |= __get_user(regs->lo, &sc->sc_mdlo);
+	if (cpu_has_dsp) {
+		err |= __get_user(treg, &sc->sc_hi1); mthi1(treg);
+		err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg);
+		err |= __get_user(treg, &sc->sc_hi2); mthi2(treg);
+		err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg);
+		err |= __get_user(treg, &sc->sc_hi3); mthi3(treg);
+		err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
+		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+	}
+
+	for (i = 1; i < 32; i++)
+		err |= __get_user(regs->regs[i], &sc->sc_regs[i]);
+
+	err |= __get_user(used_math, &sc->sc_used_math);
+	conditional_used_math(used_math);
+
+	if (used_math) {
+		/* restore fpu context if we have used it before */
+		if (!err)
+			err = check_and_restore_fp_context32(sc);
+	} else {
+		/* signal handler may have used FPU.  Give it up. */
+		lose_fpu(0);
+	}
+
+	return err;
+}
+
+/*
+ *
+ */
+extern void __put_sigset_unknown_nsig(void);
+extern void __get_sigset_unknown_nsig(void);
+
+static inline int put_sigset(const sigset_t *kbuf, compat_sigset_t __user *ubuf)
+{
+	int err = 0;
+
+	if (!access_ok(VERIFY_WRITE, ubuf, sizeof(*ubuf)))
+		return -EFAULT;
+
+	switch (_NSIG_WORDS) {
+	default:
+		__put_sigset_unknown_nsig();
+	case 2:
+		err |= __put_user(kbuf->sig[1] >> 32, &ubuf->sig[3]);
+		err |= __put_user(kbuf->sig[1] & 0xffffffff, &ubuf->sig[2]);
+	case 1:
+		err |= __put_user(kbuf->sig[0] >> 32, &ubuf->sig[1]);
+		err |= __put_user(kbuf->sig[0] & 0xffffffff, &ubuf->sig[0]);
+	}
+
+	return err;
+}
+
+static inline int get_sigset(sigset_t *kbuf, const compat_sigset_t __user *ubuf)
+{
+	int err = 0;
+	unsigned long sig[4];
+
+	if (!access_ok(VERIFY_READ, ubuf, sizeof(*ubuf)))
+		return -EFAULT;
+
+	switch (_NSIG_WORDS) {
+	default:
+		__get_sigset_unknown_nsig();
+	case 2:
+		err |= __get_user(sig[3], &ubuf->sig[3]);
+		err |= __get_user(sig[2], &ubuf->sig[2]);
+		kbuf->sig[1] = sig[2] | (sig[3] << 32);
+	case 1:
+		err |= __get_user(sig[1], &ubuf->sig[1]);
+		err |= __get_user(sig[0], &ubuf->sig[0]);
+		kbuf->sig[0] = sig[0] | (sig[1] << 32);
+	}
+
+	return err;
+}
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+
+asmlinkage int sys32_sigsuspend(compat_sigset_t __user *uset)
+{
+	return compat_sys_rt_sigsuspend(uset, sizeof(compat_sigset_t));
+}
+
+SYSCALL_DEFINE3(32_sigaction, long, sig, const struct compat_sigaction __user *, act,
+	struct compat_sigaction __user *, oact)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+	int err = 0;
+
+	if (act) {
+		old_sigset_t mask;
+		s32 handler;
+
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
+			return -EFAULT;
+		err |= __get_user(handler, &act->sa_handler);
+		new_ka.sa.sa_handler = (void __user *)(s64)handler;
+		err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+		err |= __get_user(mask, &act->sa_mask.sig[0]);
+		if (err)
+			return -EFAULT;
+
+		siginitset(&new_ka.sa.sa_mask, mask);
+	}
+
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+	if (!ret && oact) {
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
+			return -EFAULT;
+		err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+		err |= __put_user((u32)(u64)old_ka.sa.sa_handler,
+				  &oact->sa_handler);
+		err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig);
+		err |= __put_user(0, &oact->sa_mask.sig[1]);
+		err |= __put_user(0, &oact->sa_mask.sig[2]);
+		err |= __put_user(0, &oact->sa_mask.sig[3]);
+		if (err)
+			return -EFAULT;
+	}
+
+	return ret;
+}
+
+int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
+{
+	int err;
+
+	if (!access_ok (VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
+		return -EFAULT;
+
+	/* If you change siginfo_t structure, please be sure
+	   this code is fixed accordingly.
+	   It should never copy any pad contained in the structure
+	   to avoid security leaks, but must copy the generic
+	   3 ints plus the relevant union member.
+	   This routine must convert siginfo from 64bit to 32bit as well
+	   at the same time.  */
+	err = __put_user(from->si_signo, &to->si_signo);
+	err |= __put_user(from->si_errno, &to->si_errno);
+	err |= __put_user((short)from->si_code, &to->si_code);
+	if (from->si_code < 0)
+		err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
+	else {
+		switch (from->si_code >> 16) {
+		case __SI_TIMER >> 16:
+			err |= __put_user(from->si_tid, &to->si_tid);
+			err |= __put_user(from->si_overrun, &to->si_overrun);
+			err |= __put_user(from->si_int, &to->si_int);
+			break;
+		case __SI_CHLD >> 16:
+			err |= __put_user(from->si_utime, &to->si_utime);
+			err |= __put_user(from->si_stime, &to->si_stime);
+			err |= __put_user(from->si_status, &to->si_status);
+		default:
+			err |= __put_user(from->si_pid, &to->si_pid);
+			err |= __put_user(from->si_uid, &to->si_uid);
+			break;
+		case __SI_FAULT >> 16:
+			err |= __put_user((unsigned long)from->si_addr, &to->si_addr);
+			break;
+		case __SI_POLL >> 16:
+			err |= __put_user(from->si_band, &to->si_band);
+			err |= __put_user(from->si_fd, &to->si_fd);
+			break;
+		case __SI_RT >> 16: /* This is not generated by the kernel as of now.  */
+		case __SI_MESGQ >> 16:
+			err |= __put_user(from->si_pid, &to->si_pid);
+			err |= __put_user(from->si_uid, &to->si_uid);
+			err |= __put_user(from->si_int, &to->si_int);
+			break;
+		}
+	}
+	return err;
+}
+
+int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
+{
+	memset(to, 0, sizeof *to);
+
+	if (copy_from_user(to, from, 3*sizeof(int)) ||
+	    copy_from_user(to->_sifields._pad,
+			   from->_sifields._pad, SI_PAD_SIZE32))
+		return -EFAULT;
+
+	return 0;
+}
+
+asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
+{
+	struct sigframe32 __user *frame;
+	sigset_t blocked;
+	int sig;
+
+	frame = (struct sigframe32 __user *) regs.regs[29];
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_conv_sigset_from_user(&blocked, &frame->sf_mask))
+		goto badframe;
+
+	set_current_blocked(&blocked);
+
+	sig = restore_sigcontext32(&regs, &frame->sf_sc);
+	if (sig < 0)
+		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	__asm__ __volatile__(
+		"move\t$29, %0\n\t"
+		"j\tsyscall_exit"
+		:/* no outputs */
+		:"r" (&regs));
+	/* Unreached */
+
+badframe:
+	force_sig(SIGSEGV, current);
+}
+
+asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
+{
+	struct rt_sigframe32 __user *frame;
+	sigset_t set;
+	int sig;
+
+	frame = (struct rt_sigframe32 __user *) regs.regs[29];
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	sig = restore_sigcontext32(&regs, &frame->rs_uc.uc_mcontext);
+	if (sig < 0)
+		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
+
+	if (compat_restore_altstack(&frame->rs_uc.uc_stack))
+		goto badframe;
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	__asm__ __volatile__(
+		"move\t$29, %0\n\t"
+		"j\tsyscall_exit"
+		:/* no outputs */
+		:"r" (&regs));
+	/* Unreached */
+
+badframe:
+	force_sig(SIGSEGV, current);
+}
+
+static int setup_frame_32(void *sig_return, struct ksignal *ksig,
+			  struct pt_regs *regs, sigset_t *set)
+{
+	struct sigframe32 __user *frame;
+	int err = 0;
+
+	frame = get_sigframe(ksig, regs, sizeof(*frame));
+	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
+		return -EFAULT;
+
+	err |= setup_sigcontext32(regs, &frame->sf_sc);
+	err |= __copy_conv_sigset_to_user(&frame->sf_mask, set);
+
+	if (err)
+		return -EFAULT;
+
+	/*
+	 * Arguments to signal handler:
+	 *
+	 *   a0 = signal number
+	 *   a1 = 0 (should be cause)
+	 *   a2 = pointer to struct sigcontext
+	 *
+	 * $25 and c0_epc point to the signal handler, $29 points to the
+	 * struct sigframe.
+	 */
+	regs->regs[ 4] = ksig->sig;
+	regs->regs[ 5] = 0;
+	regs->regs[ 6] = (unsigned long) &frame->sf_sc;
+	regs->regs[29] = (unsigned long) frame;
+	regs->regs[31] = (unsigned long) sig_return;
+	regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler;
+
+	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
+	       current->comm, current->pid,
+	       frame, regs->cp0_epc, regs->regs[31]);
+
+	return 0;
+}
+
+static int setup_rt_frame_32(void *sig_return, struct ksignal *ksig,
+			     struct pt_regs *regs, sigset_t *set)
+{
+	struct rt_sigframe32 __user *frame;
+	int err = 0;
+
+	frame = get_sigframe(ksig, regs, sizeof(*frame));
+	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
+		return -EFAULT;
+
+	/* Convert (siginfo_t -> compat_siginfo_t) and copy to user. */
+	err |= copy_siginfo_to_user32(&frame->rs_info, &ksig->info);
+
+	/* Create the ucontext.	 */
+	err |= __put_user(0, &frame->rs_uc.uc_flags);
+	err |= __put_user(0, &frame->rs_uc.uc_link);
+	err |= __compat_save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]);
+	err |= setup_sigcontext32(regs, &frame->rs_uc.uc_mcontext);
+	err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set);
+
+	if (err)
+		return -EFAULT;
+
+	/*
+	 * Arguments to signal handler:
+	 *
+	 *   a0 = signal number
+	 *   a1 = 0 (should be cause)
+	 *   a2 = pointer to ucontext
+	 *
+	 * $25 and c0_epc point to the signal handler, $29 points to
+	 * the struct rt_sigframe32.
+	 */
+	regs->regs[ 4] = ksig->sig;
+	regs->regs[ 5] = (unsigned long) &frame->rs_info;
+	regs->regs[ 6] = (unsigned long) &frame->rs_uc;
+	regs->regs[29] = (unsigned long) frame;
+	regs->regs[31] = (unsigned long) sig_return;
+	regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler;
+
+	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
+	       current->comm, current->pid,
+	       frame, regs->cp0_epc, regs->regs[31]);
+
+	return 0;
+}
+
+/*
+ * o32 compatibility on 64-bit kernels, without DSP ASE
+ */
+struct mips_abi mips_abi_32 = {
+	.setup_frame	= setup_frame_32,
+	.signal_return_offset =
+		offsetof(struct mips_vdso, o32_signal_trampoline),
+	.setup_rt_frame = setup_rt_frame_32,
+	.rt_signal_return_offset =
+		offsetof(struct mips_vdso, o32_rt_signal_trampoline),
+	.restart	= __NR_O32_restart_syscall
+};
+
+static int signal32_init(void)
+{
+	if (cpu_has_fpu) {
+		save_fp_context32 = _save_fp_context32;
+		restore_fp_context32 = _restore_fp_context32;
+	} else {
+		save_fp_context32 = copy_fp_to_sigcontext32;
+		restore_fp_context32 = copy_fp_from_sigcontext32;
+	}
+
+	return 0;
+}
+
+arch_initcall(signal32_init);
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
new file mode 100644
index 000000000..f1d4751ee
--- /dev/null
+++ b/arch/mips/kernel/signal_n32.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/cache.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/compat.h>
+#include <linux/bitops.h>
+
+#include <asm/abi.h>
+#include <asm/asm.h>
+#include <asm/cacheflush.h>
+#include <asm/compat-signal.h>
+#include <asm/sim.h>
+#include <asm/uaccess.h>
+#include <asm/ucontext.h>
+#include <asm/fpu.h>
+#include <asm/cpu-features.h>
+#include <asm/war.h>
+#include <asm/vdso.h>
+
+#include "signal-common.h"
+
+/*
+ * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
+ */
+#define __NR_N32_restart_syscall	6214
+
+extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *);
+extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
+
+struct ucontextn32 {
+	u32		    uc_flags;
+	s32		    uc_link;
+	compat_stack_t      uc_stack;
+	struct sigcontext   uc_mcontext;
+	compat_sigset_t	    uc_sigmask;	  /* mask last for extensibility */
+};
+
+struct rt_sigframe_n32 {
+	u32 rs_ass[4];			/* argument save space for o32 */
+	u32 rs_pad[2];			/* Was: signal trampoline */
+	struct compat_siginfo rs_info;
+	struct ucontextn32 rs_uc;
+};
+
+asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
+{
+	struct rt_sigframe_n32 __user *frame;
+	sigset_t set;
+	int sig;
+
+	frame = (struct rt_sigframe_n32 __user *) regs.regs[29];
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
+	if (sig < 0)
+		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
+
+	if (compat_restore_altstack(&frame->rs_uc.uc_stack))
+		goto badframe;
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	__asm__ __volatile__(
+		"move\t$29, %0\n\t"
+		"j\tsyscall_exit"
+		:/* no outputs */
+		:"r" (&regs));
+	/* Unreached */
+
+badframe:
+	force_sig(SIGSEGV, current);
+}
+
+static int setup_rt_frame_n32(void *sig_return, struct ksignal *ksig,
+			      struct pt_regs *regs, sigset_t *set)
+{
+	struct rt_sigframe_n32 __user *frame;
+	int err = 0;
+
+	frame = get_sigframe(ksig, regs, sizeof(*frame));
+	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
+		return -EFAULT;
+
+	/* Create siginfo.  */
+	err |= copy_siginfo_to_user32(&frame->rs_info, &ksig->info);
+
+	/* Create the ucontext.	 */
+	err |= __put_user(0, &frame->rs_uc.uc_flags);
+	err |= __put_user(0, &frame->rs_uc.uc_link);
+	err |= __compat_save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]);
+	err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext);
+	err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set);
+
+	if (err)
+		return -EFAULT;
+
+	/*
+	 * Arguments to signal handler:
+	 *
+	 *   a0 = signal number
+	 *   a1 = 0 (should be cause)
+	 *   a2 = pointer to ucontext
+	 *
+	 * $25 and c0_epc point to the signal handler, $29 points to
+	 * the struct rt_sigframe.
+	 */
+	regs->regs[ 4] = ksig->sig;
+	regs->regs[ 5] = (unsigned long) &frame->rs_info;
+	regs->regs[ 6] = (unsigned long) &frame->rs_uc;
+	regs->regs[29] = (unsigned long) frame;
+	regs->regs[31] = (unsigned long) sig_return;
+	regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler;
+
+	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
+	       current->comm, current->pid,
+	       frame, regs->cp0_epc, regs->regs[31]);
+
+	return 0;
+}
+
+struct mips_abi mips_abi_n32 = {
+	.setup_rt_frame = setup_rt_frame_n32,
+	.rt_signal_return_offset =
+		offsetof(struct mips_vdso, n32_rt_signal_trampoline),
+	.restart	= __NR_N32_restart_syscall
+};
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
new file mode 100644
index 000000000..336708ae5
--- /dev/null
+++ b/arch/mips/kernel/smp-bmips.c
@@ -0,0 +1,567 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com)
+ *
+ * SMP support for BMIPS
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/reboot.h>
+#include <linux/io.h>
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <asm/time.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/bootinfo.h>
+#include <asm/pmon.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/mipsregs.h>
+#include <asm/bmips.h>
+#include <asm/traps.h>
+#include <asm/barrier.h>
+#include <asm/cpu-features.h>
+
+static int __maybe_unused max_cpus = 1;
+
+/* these may be configured by the platform code */
+int bmips_smp_enabled = 1;
+int bmips_cpu_offset;
+cpumask_t bmips_booted_mask;
+unsigned long bmips_tp1_irqs = IE_IRQ1;
+
+#define RESET_FROM_KSEG0		0x80080800
+#define RESET_FROM_KSEG1		0xa0080800
+
+static void bmips_set_reset_vec(int cpu, u32 val);
+
+#ifdef CONFIG_SMP
+
+/* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */
+unsigned long bmips_smp_boot_sp;
+unsigned long bmips_smp_boot_gp;
+
+static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
+static void bmips5000_send_ipi_single(int cpu, unsigned int action);
+static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
+static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);
+
+/* SW interrupts 0,1 are used for interprocessor signaling */
+#define IPI0_IRQ			(MIPS_CPU_IRQ_BASE + 0)
+#define IPI1_IRQ			(MIPS_CPU_IRQ_BASE + 1)
+
+#define CPUNUM(cpu, shift)		(((cpu) + bmips_cpu_offset) << (shift))
+#define ACTION_CLR_IPI(cpu, ipi)	(0x2000 | CPUNUM(cpu, 9) | ((ipi) << 8))
+#define ACTION_SET_IPI(cpu, ipi)	(0x3000 | CPUNUM(cpu, 9) | ((ipi) << 8))
+#define ACTION_BOOT_THREAD(cpu)		(0x08 | CPUNUM(cpu, 0))
+
+static void __init bmips_smp_setup(void)
+{
+	int i, cpu = 1, boot_cpu = 0;
+	int cpu_hw_intr;
+
+	switch (current_cpu_type()) {
+	case CPU_BMIPS4350:
+	case CPU_BMIPS4380:
+		/* arbitration priority */
+		clear_c0_brcm_cmt_ctrl(0x30);
+
+		/* NBK and weak order flags */
+		set_c0_brcm_config_0(0x30000);
+
+		/* Find out if we are running on TP0 or TP1 */
+		boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
+
+		/*
+		 * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
+		 * thread
+		 * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
+		 * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
+		 */
+		if (boot_cpu == 0)
+			cpu_hw_intr = 0x02;
+		else
+			cpu_hw_intr = 0x1d;
+
+		change_c0_brcm_cmt_intr(0xf8018000,
+					(cpu_hw_intr << 27) | (0x03 << 15));
+
+		/* single core, 2 threads (2 pipelines) */
+		max_cpus = 2;
+
+		break;
+	case CPU_BMIPS5000:
+		/* enable raceless SW interrupts */
+		set_c0_brcm_config(0x03 << 22);
+
+		/* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
+		change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
+
+		/* N cores, 2 threads per core */
+		max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
+
+		/* clear any pending SW interrupts */
+		for (i = 0; i < max_cpus; i++) {
+			write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
+			write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
+		}
+
+		break;
+	default:
+		max_cpus = 1;
+	}
+
+	if (!bmips_smp_enabled)
+		max_cpus = 1;
+
+	/* this can be overridden by the BSP */
+	if (!board_ebase_setup)
+		board_ebase_setup = &bmips_ebase_setup;
+
+	__cpu_number_map[boot_cpu] = 0;
+	__cpu_logical_map[0] = boot_cpu;
+
+	for (i = 0; i < max_cpus; i++) {
+		if (i != boot_cpu) {
+			__cpu_number_map[i] = cpu;
+			__cpu_logical_map[cpu] = i;
+			cpu++;
+		}
+		set_cpu_possible(i, 1);
+		set_cpu_present(i, 1);
+	}
+}
+
+/*
+ * IPI IRQ setup - runs on CPU0
+ */
+static void bmips_prepare_cpus(unsigned int max_cpus)
+{
+	irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);
+
+	switch (current_cpu_type()) {
+	case CPU_BMIPS4350:
+	case CPU_BMIPS4380:
+		bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
+		break;
+	case CPU_BMIPS5000:
+		bmips_ipi_interrupt = bmips5000_ipi_interrupt;
+		break;
+	default:
+		return;
+	}
+
+	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
+			"smp_ipi0", NULL))
+		panic("Can't request IPI0 interrupt");
+	if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
+			"smp_ipi1", NULL))
+		panic("Can't request IPI1 interrupt");
+}
+
+/*
+ * Tell the hardware to boot CPUx - runs on CPU0
+ */
+static void bmips_boot_secondary(int cpu, struct task_struct *idle)
+{
+	bmips_smp_boot_sp = __KSTK_TOS(idle);
+	bmips_smp_boot_gp = (unsigned long)task_thread_info(idle);
+	mb();
+
+	/*
+	 * Initial boot sequence for secondary CPU:
+	 *   bmips_reset_nmi_vec @ a000_0000 ->
+	 *   bmips_smp_entry ->
+	 *   plat_wired_tlb_setup (cached function call; optional) ->
+	 *   start_secondary (cached jump)
+	 *
+	 * Warm restart sequence:
+	 *   play_dead WAIT loop ->
+	 *   bmips_smp_int_vec @ BMIPS_WARM_RESTART_VEC ->
+	 *   eret to play_dead ->
+	 *   bmips_secondary_reentry ->
+	 *   start_secondary
+	 */
+
+	pr_info("SMP: Booting CPU%d...\n", cpu);
+
+	if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
+		/* kseg1 might not exist if this CPU enabled XKS01 */
+		bmips_set_reset_vec(cpu, RESET_FROM_KSEG0);
+
+		switch (current_cpu_type()) {
+		case CPU_BMIPS4350:
+		case CPU_BMIPS4380:
+			bmips43xx_send_ipi_single(cpu, 0);
+			break;
+		case CPU_BMIPS5000:
+			bmips5000_send_ipi_single(cpu, 0);
+			break;
+		}
+	} else {
+		bmips_set_reset_vec(cpu, RESET_FROM_KSEG1);
+
+		switch (current_cpu_type()) {
+		case CPU_BMIPS4350:
+		case CPU_BMIPS4380:
+			/* Reset slave TP1 if booting from TP0 */
+			if (cpu_logical_map(cpu) == 1)
+				set_c0_brcm_cmt_ctrl(0x01);
+			break;
+		case CPU_BMIPS5000:
+			write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
+			break;
+		}
+		cpumask_set_cpu(cpu, &bmips_booted_mask);
+	}
+}
+
+/*
+ * Early setup - runs on secondary CPU after cache probe
+ */
+static void bmips_init_secondary(void)
+{
+	switch (current_cpu_type()) {
+	case CPU_BMIPS4350:
+	case CPU_BMIPS4380:
+		clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
+		break;
+	case CPU_BMIPS5000:
+		write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
+		break;
+	}
+}
+
+/*
+ * Late setup - runs on secondary CPU before entering the idle loop
+ */
+static void bmips_smp_finish(void)
+{
+	pr_info("SMP: CPU%d is running\n", smp_processor_id());
+
+	/* make sure there won't be a timer interrupt for a little while */
+	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+
+	irq_enable_hazard();
+	set_c0_status(IE_SW0 | IE_SW1 | bmips_tp1_irqs | IE_IRQ5 | ST0_IE);
+	irq_enable_hazard();
+}
+
+/*
+ * BMIPS5000 raceless IPIs
+ *
+ * Each CPU has two inbound SW IRQs which are independent of all other CPUs.
+ * IPI0 is used for SMP_RESCHEDULE_YOURSELF
+ * IPI1 is used for SMP_CALL_FUNCTION
+ */
+
+static void bmips5000_send_ipi_single(int cpu, unsigned int action)
+{
+	write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
+}
+
+static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
+{
+	int action = irq - IPI0_IRQ;
+
+	write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), action));
+
+	if (action == 0)
+		scheduler_ipi();
+	else
+		smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static void bmips5000_send_ipi_mask(const struct cpumask *mask,
+	unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu(i, mask)
+		bmips5000_send_ipi_single(i, action);
+}
+
+/*
+ * BMIPS43xx racey IPIs
+ *
+ * We use one inbound SW IRQ for each CPU.
+ *
+ * A spinlock must be held in order to keep CPUx from accidentally clearing
+ * an incoming IPI when it writes CP0 CAUSE to raise an IPI on CPUy.  The
+ * same spinlock is used to protect the action masks.
+ */
+
+static DEFINE_SPINLOCK(ipi_lock);
+static DEFINE_PER_CPU(int, ipi_action_mask);
+
+static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ipi_lock, flags);
+	set_c0_cause(cpu ? C_SW1 : C_SW0);
+	per_cpu(ipi_action_mask, cpu) |= action;
+	irq_enable_hazard();
+	spin_unlock_irqrestore(&ipi_lock, flags);
+}
+
+static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
+{
+	unsigned long flags;
+	int action, cpu = irq - IPI0_IRQ;
+
+	spin_lock_irqsave(&ipi_lock, flags);
+	action = __this_cpu_read(ipi_action_mask);
+	per_cpu(ipi_action_mask, cpu) = 0;
+	clear_c0_cause(cpu ? C_SW1 : C_SW0);
+	spin_unlock_irqrestore(&ipi_lock, flags);
+
+	if (action & SMP_RESCHEDULE_YOURSELF)
+		scheduler_ipi();
+	if (action & SMP_CALL_FUNCTION)
+		smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static void bmips43xx_send_ipi_mask(const struct cpumask *mask,
+	unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu(i, mask)
+		bmips43xx_send_ipi_single(i, action);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int bmips_cpu_disable(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (cpu == 0)
+		return -EBUSY;
+
+	pr_info("SMP: CPU%d is offline\n", cpu);
+
+	set_cpu_online(cpu, false);
+	cpumask_clear_cpu(cpu, &cpu_callin_map);
+	clear_c0_status(IE_IRQ5);
+
+	local_flush_tlb_all();
+	local_flush_icache_range(0, ~0);
+
+	return 0;
+}
+
+static void bmips_cpu_die(unsigned int cpu)
+{
+}
+
+void __ref play_dead(void)
+{
+	idle_task_exit();
+
+	/* flush data cache */
+	_dma_cache_wback_inv(0, ~0);
+
+	/*
+	 * Wakeup is on SW0 or SW1; disable everything else
+	 * Use BEV !IV (BMIPS_WARM_RESTART_VEC) to avoid the regular Linux
+	 * IRQ handlers; this clears ST0_IE and returns immediately.
+	 */
+	clear_c0_cause(CAUSEF_IV | C_SW0 | C_SW1);
+	change_c0_status(
+		IE_IRQ5 | bmips_tp1_irqs | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV,
+		IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV);
+	irq_disable_hazard();
+
+	/*
+	 * wait for SW interrupt from bmips_boot_secondary(), then jump
+	 * back to start_secondary()
+	 */
+	__asm__ __volatile__(
+	"	wait\n"
+	"	j	bmips_secondary_reentry\n"
+	: : : "memory");
+}
+
+#endif /* CONFIG_HOTPLUG_CPU */
+
+struct plat_smp_ops bmips43xx_smp_ops = {
+	.smp_setup		= bmips_smp_setup,
+	.prepare_cpus		= bmips_prepare_cpus,
+	.boot_secondary		= bmips_boot_secondary,
+	.smp_finish		= bmips_smp_finish,
+	.init_secondary		= bmips_init_secondary,
+	.send_ipi_single	= bmips43xx_send_ipi_single,
+	.send_ipi_mask		= bmips43xx_send_ipi_mask,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= bmips_cpu_disable,
+	.cpu_die		= bmips_cpu_die,
+#endif
+};
+
+struct plat_smp_ops bmips5000_smp_ops = {
+	.smp_setup		= bmips_smp_setup,
+	.prepare_cpus		= bmips_prepare_cpus,
+	.boot_secondary		= bmips_boot_secondary,
+	.smp_finish		= bmips_smp_finish,
+	.init_secondary		= bmips_init_secondary,
+	.send_ipi_single	= bmips5000_send_ipi_single,
+	.send_ipi_mask		= bmips5000_send_ipi_mask,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= bmips_cpu_disable,
+	.cpu_die		= bmips_cpu_die,
+#endif
+};
+
+#endif /* CONFIG_SMP */
+
+/***********************************************************************
+ * BMIPS vector relocation
+ * This is primarily used for SMP boot, but it is applicable to some
+ * UP BMIPS systems as well.
+ ***********************************************************************/
+
+static void bmips_wr_vec(unsigned long dst, char *start, char *end)
+{
+	memcpy((void *)dst, start, end - start);
+	dma_cache_wback(dst, end - start);
+	local_flush_icache_range(dst, dst + (end - start));
+	instruction_hazard();
+}
+
+static inline void bmips_nmi_handler_setup(void)
+{
+	bmips_wr_vec(BMIPS_NMI_RESET_VEC, &bmips_reset_nmi_vec,
+		&bmips_reset_nmi_vec_end);
+	bmips_wr_vec(BMIPS_WARM_RESTART_VEC, &bmips_smp_int_vec,
+		&bmips_smp_int_vec_end);
+}
+
+struct reset_vec_info {
+	int cpu;
+	u32 val;
+};
+
+static void bmips_set_reset_vec_remote(void *vinfo)
+{
+	struct reset_vec_info *info = vinfo;
+	int shift = info->cpu & 0x01 ? 16 : 0;
+	u32 mask = ~(0xffff << shift), val = info->val >> 16;
+
+	preempt_disable();
+	if (smp_processor_id() > 0) {
+		smp_call_function_single(0, &bmips_set_reset_vec_remote,
+					 info, 1);
+	} else {
+		if (info->cpu & 0x02) {
+			/* BMIPS5200 "should" use mask/shift, but it's buggy */
+			bmips_write_zscm_reg(0xa0, (val << 16) | val);
+			bmips_read_zscm_reg(0xa0);
+		} else {
+			write_c0_brcm_bootvec((read_c0_brcm_bootvec() & mask) |
+					      (val << shift));
+		}
+	}
+	preempt_enable();
+}
+
+static void bmips_set_reset_vec(int cpu, u32 val)
+{
+	struct reset_vec_info info;
+
+	if (current_cpu_type() == CPU_BMIPS5000) {
+		/* this needs to run from CPU0 (which is always online) */
+		info.cpu = cpu;
+		info.val = val;
+		bmips_set_reset_vec_remote(&info);
+	} else {
+		void __iomem *cbr = BMIPS_GET_CBR();
+
+		if (cpu == 0)
+			__raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
+		else {
+			if (current_cpu_type() != CPU_BMIPS4380)
+				return;
+			__raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+		}
+	}
+	__sync();
+	back_to_back_c0_hazard();
+}
+
+void bmips_ebase_setup(void)
+{
+	unsigned long new_ebase = ebase;
+
+	BUG_ON(ebase != CKSEG0);
+
+	switch (current_cpu_type()) {
+	case CPU_BMIPS4350:
+		/*
+		 * BMIPS4350 cannot relocate the normal vectors, but it
+		 * can relocate the BEV=1 vectors.  So CPU1 starts up at
+		 * the relocated BEV=1, IV=0 general exception vector @
+		 * 0xa000_0380.
+		 *
+		 * set_uncached_handler() is used here because:
+		 *  - CPU1 will run this from uncached space
+		 *  - None of the cacheflush functions are set up yet
+		 */
+		set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
+			&bmips_smp_int_vec, 0x80);
+		__sync();
+		return;
+	case CPU_BMIPS3300:
+	case CPU_BMIPS4380:
+		/*
+		 * 0x8000_0000: reset/NMI (initially in kseg1)
+		 * 0x8000_0400: normal vectors
+		 */
+		new_ebase = 0x80000400;
+		bmips_set_reset_vec(0, RESET_FROM_KSEG0);
+		break;
+	case CPU_BMIPS5000:
+		/*
+		 * 0x8000_0000: reset/NMI (initially in kseg1)
+		 * 0x8000_1000: normal vectors
+		 */
+		new_ebase = 0x80001000;
+		bmips_set_reset_vec(0, RESET_FROM_KSEG0);
+		write_c0_ebase(new_ebase);
+		break;
+	default:
+		return;
+	}
+
+	board_nmi_handler_setup = &bmips_nmi_handler_setup;
+	ebase = new_ebase;
+}
+
+asmlinkage void __weak plat_wired_tlb_setup(void)
+{
+	/*
+	 * Called when starting/restarting a secondary CPU.
+	 * Kernel stacks and other important data might only be accessible
+	 * once the wired entries are present.
+	 */
+}
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
new file mode 100644
index 000000000..d5e0f949d
--- /dev/null
+++ b/arch/mips/kernel/smp-cmp.c
@@ -0,0 +1,159 @@
+/*
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ *    Chris Dearman (chris@mips.com)
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/compiler.h>
+#include <linux/irqchip/mips-gic.h>
+
+#include <linux/atomic.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/mips_mt.h>
+#include <asm/amon.h>
+
+static void cmp_init_secondary(void)
+{
+	struct cpuinfo_mips *c __maybe_unused = &current_cpu_data;
+
+	/* Assume GIC is present */
+	change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
+				 STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
+
+	/* Enable per-cpu interrupts: platform specific */
+
+#ifdef CONFIG_MIPS_MT_SMP
+	if (cpu_has_mipsmt)
+		c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
+			TCBIND_CURVPE;
+#endif
+}
+
+static void cmp_smp_finish(void)
+{
+	pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
+
+	/* CDFIXME: remove this? */
+	write_c0_compare(read_c0_count() + (8 * mips_hpt_frequency / HZ));
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpumask_set_cpu(smp_processor_id(), &mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+	local_irq_enable();
+}
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it running
+ * smp_bootstrap is the place to resume from
+ * __KSTK_TOS(idle) is apparently the stack pointer
+ * (unsigned long)idle->thread_info the gp
+ */
+static void cmp_boot_secondary(int cpu, struct task_struct *idle)
+{
+	struct thread_info *gp = task_thread_info(idle);
+	unsigned long sp = __KSTK_TOS(idle);
+	unsigned long pc = (unsigned long)&smp_bootstrap;
+	unsigned long a0 = 0;
+
+	pr_debug("SMPCMP: CPU%d: %s cpu %d\n", smp_processor_id(),
+		__func__, cpu);
+
+#if 0
+	/* Needed? */
+	flush_icache_range((unsigned long)gp,
+			   (unsigned long)(gp + sizeof(struct thread_info)));
+#endif
+
+	amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
+}
+
+/*
+ * Common setup before any secondaries are started
+ */
+void __init cmp_smp_setup(void)
+{
+	int i;
+	int ncpu = 0;
+
+	pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpumask_set_cpu(0, &mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+	for (i = 1; i < NR_CPUS; i++) {
+		if (amon_cpu_avail(i)) {
+			set_cpu_possible(i, true);
+			__cpu_number_map[i]	= ++ncpu;
+			__cpu_logical_map[ncpu] = i;
+		}
+	}
+
+	if (cpu_has_mipsmt) {
+		unsigned int nvpe = 1;
+#ifdef CONFIG_MIPS_MT_SMP
+		unsigned int mvpconf0 = read_c0_mvpconf0();
+
+		nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+#endif
+		smp_num_siblings = nvpe;
+	}
+	pr_info("Detected %i available secondary CPU(s)\n", ncpu);
+}
+
+void __init cmp_prepare_cpus(unsigned int max_cpus)
+{
+	pr_debug("SMPCMP: CPU%d: %s max_cpus=%d\n",
+		 smp_processor_id(), __func__, max_cpus);
+
+#ifdef CONFIG_MIPS_MT
+	/*
+	 * FIXME: some of these options are per-system, some per-core and
+	 * some per-cpu
+	 */
+	mips_mt_set_cpuoptions();
+#endif
+
+}
+
+struct plat_smp_ops cmp_smp_ops = {
+	.send_ipi_single	= gic_send_ipi_single,
+	.send_ipi_mask		= gic_send_ipi_mask,
+	.init_secondary		= cmp_init_secondary,
+	.smp_finish		= cmp_smp_finish,
+	.boot_secondary		= cmp_boot_secondary,
+	.smp_setup		= cmp_smp_setup,
+	.prepare_cpus		= cmp_prepare_cpus,
+};
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
new file mode 100644
index 000000000..4251d390b
--- /dev/null
+++ b/arch/mips/kernel/smp-cps.c
@@ -0,0 +1,476 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <linux/types.h>
+
+#include <asm/bcache.h>
+#include <asm/mips-cm.h>
+#include <asm/mips-cpc.h>
+#include <asm/mips_mt.h>
+#include <asm/mipsregs.h>
+#include <asm/pm-cps.h>
+#include <asm/r4kcache.h>
+#include <asm/smp-cps.h>
+#include <asm/time.h>
+#include <asm/uasm.h>
+
+static DECLARE_BITMAP(core_power, NR_CPUS);
+
+struct core_boot_config *mips_cps_core_bootcfg;
+
+static unsigned core_vpe_count(unsigned core)
+{
+	unsigned cfg;
+
+	if (!config_enabled(CONFIG_MIPS_MT_SMP) || !cpu_has_mipsmt)
+		return 1;
+
+	write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF);
+	cfg = read_gcr_co_config() & CM_GCR_Cx_CONFIG_PVPE_MSK;
+	return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1;
+}
+
+static void __init cps_smp_setup(void)
+{
+	unsigned int ncores, nvpes, core_vpes;
+	int c, v;
+
+	/* Detect & record VPE topology */
+	ncores = mips_cm_numcores();
+	pr_info("VPE topology ");
+	for (c = nvpes = 0; c < ncores; c++) {
+		core_vpes = core_vpe_count(c);
+		pr_cont("%c%u", c ? ',' : '{', core_vpes);
+
+		/* Use the number of VPEs in core 0 for smp_num_siblings */
+		if (!c)
+			smp_num_siblings = core_vpes;
+
+		for (v = 0; v < min_t(int, core_vpes, NR_CPUS - nvpes); v++) {
+			cpu_data[nvpes + v].core = c;
+#ifdef CONFIG_MIPS_MT_SMP
+			cpu_data[nvpes + v].vpe_id = v;
+#endif
+		}
+
+		nvpes += core_vpes;
+	}
+	pr_cont("} total %u\n", nvpes);
+
+	/* Indicate present CPUs (CPU being synonymous with VPE) */
+	for (v = 0; v < min_t(unsigned, nvpes, NR_CPUS); v++) {
+		set_cpu_possible(v, true);
+		set_cpu_present(v, true);
+		__cpu_number_map[v] = v;
+		__cpu_logical_map[v] = v;
+	}
+
+	/* Set a coherent default CCA (CWB) */
+	change_c0_config(CONF_CM_CMASK, 0x5);
+
+	/* Core 0 is powered up (we're running on it) */
+	bitmap_set(core_power, 0, 1);
+
+	/* Initialise core 0 */
+	mips_cps_core_init();
+
+	/* Make core 0 coherent with everything */
+	write_gcr_cl_coherence(0xff);
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpumask_set_cpu(0, &mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+}
+
+static void __init cps_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned ncores, core_vpes, c, cca;
+	bool cca_unsuitable;
+	u32 *entry_code;
+
+	mips_mt_set_cpuoptions();
+
+	/* Detect whether the CCA is unsuited to multi-core SMP */
+	cca = read_c0_config() & CONF_CM_CMASK;
+	switch (cca) {
+	case 0x4: /* CWBE */
+	case 0x5: /* CWB */
+		/* The CCA is coherent, multi-core is fine */
+		cca_unsuitable = false;
+		break;
+
+	default:
+		/* CCA is not coherent, multi-core is not usable */
+		cca_unsuitable = true;
+	}
+
+	/* Warn the user if the CCA prevents multi-core */
+	ncores = mips_cm_numcores();
+	if (cca_unsuitable && ncores > 1) {
+		pr_warn("Using only one core due to unsuitable CCA 0x%x\n",
+			cca);
+
+		for_each_present_cpu(c) {
+			if (cpu_data[c].core)
+				set_cpu_present(c, false);
+		}
+	}
+
+	/*
+	 * Patch the start of mips_cps_core_entry to provide:
+	 *
+	 * v0 = CM base address
+	 * s0 = kseg0 CCA
+	 */
+	entry_code = (u32 *)&mips_cps_core_entry;
+	UASM_i_LA(&entry_code, 3, (long)mips_cm_base);
+	uasm_i_addiu(&entry_code, 16, 0, cca);
+	blast_dcache_range((unsigned long)&mips_cps_core_entry,
+			   (unsigned long)entry_code);
+	bc_wback_inv((unsigned long)&mips_cps_core_entry,
+		     (void *)entry_code - (void *)&mips_cps_core_entry);
+	__sync();
+
+	/* Allocate core boot configuration structs */
+	mips_cps_core_bootcfg = kcalloc(ncores, sizeof(*mips_cps_core_bootcfg),
+					GFP_KERNEL);
+	if (!mips_cps_core_bootcfg) {
+		pr_err("Failed to allocate boot config for %u cores\n", ncores);
+		goto err_out;
+	}
+
+	/* Allocate VPE boot configuration structs */
+	for (c = 0; c < ncores; c++) {
+		core_vpes = core_vpe_count(c);
+		mips_cps_core_bootcfg[c].vpe_config = kcalloc(core_vpes,
+				sizeof(*mips_cps_core_bootcfg[c].vpe_config),
+				GFP_KERNEL);
+		if (!mips_cps_core_bootcfg[c].vpe_config) {
+			pr_err("Failed to allocate %u VPE boot configs\n",
+			       core_vpes);
+			goto err_out;
+		}
+	}
+
+	/* Mark this CPU as booted */
+	atomic_set(&mips_cps_core_bootcfg[current_cpu_data.core].vpe_mask,
+		   1 << cpu_vpe_id(&current_cpu_data));
+
+	return;
+err_out:
+	/* Clean up allocations */
+	if (mips_cps_core_bootcfg) {
+		for (c = 0; c < ncores; c++)
+			kfree(mips_cps_core_bootcfg[c].vpe_config);
+		kfree(mips_cps_core_bootcfg);
+		mips_cps_core_bootcfg = NULL;
+	}
+
+	/* Effectively disable SMP by declaring CPUs not present */
+	for_each_possible_cpu(c) {
+		if (c == 0)
+			continue;
+		set_cpu_present(c, false);
+	}
+}
+
+static void boot_core(unsigned core)
+{
+	u32 access;
+
+	/* Select the appropriate core */
+	write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF);
+
+	/* Set its reset vector */
+	write_gcr_co_reset_base(CKSEG1ADDR((unsigned long)mips_cps_core_entry));
+
+	/* Ensure its coherency is disabled */
+	write_gcr_co_coherence(0);
+
+	/* Ensure the core can access the GCRs */
+	access = read_gcr_access();
+	access |= 1 << (CM_GCR_ACCESS_ACCESSEN_SHF + core);
+	write_gcr_access(access);
+
+	if (mips_cpc_present()) {
+		/* Reset the core */
+		mips_cpc_lock_other(core);
+		write_cpc_co_cmd(CPC_Cx_CMD_RESET);
+		mips_cpc_unlock_other();
+	} else {
+		/* Take the core out of reset */
+		write_gcr_co_reset_release(0);
+	}
+
+	/* The core is now powered up */
+	bitmap_set(core_power, core, 1);
+}
+
+static void remote_vpe_boot(void *dummy)
+{
+	mips_cps_boot_vpes();
+}
+
+static void cps_boot_secondary(int cpu, struct task_struct *idle)
+{
+	unsigned core = cpu_data[cpu].core;
+	unsigned vpe_id = cpu_vpe_id(&cpu_data[cpu]);
+	struct core_boot_config *core_cfg = &mips_cps_core_bootcfg[core];
+	struct vpe_boot_config *vpe_cfg = &core_cfg->vpe_config[vpe_id];
+	unsigned int remote;
+	int err;
+
+	vpe_cfg->pc = (unsigned long)&smp_bootstrap;
+	vpe_cfg->sp = __KSTK_TOS(idle);
+	vpe_cfg->gp = (unsigned long)task_thread_info(idle);
+
+	atomic_or(1 << cpu_vpe_id(&cpu_data[cpu]), &core_cfg->vpe_mask);
+
+	preempt_disable();
+
+	if (!test_bit(core, core_power)) {
+		/* Boot a VPE on a powered down core */
+		boot_core(core);
+		goto out;
+	}
+
+	if (core != current_cpu_data.core) {
+		/* Boot a VPE on another powered up core */
+		for (remote = 0; remote < NR_CPUS; remote++) {
+			if (cpu_data[remote].core != core)
+				continue;
+			if (cpu_online(remote))
+				break;
+		}
+		BUG_ON(remote >= NR_CPUS);
+
+		err = smp_call_function_single(remote, remote_vpe_boot,
+					       NULL, 1);
+		if (err)
+			panic("Failed to call remote CPU\n");
+		goto out;
+	}
+
+	BUG_ON(!cpu_has_mipsmt);
+
+	/* Boot a VPE on this core */
+	mips_cps_boot_vpes();
+out:
+	preempt_enable();
+}
+
+static void cps_init_secondary(void)
+{
+	/* Disable MT - we only want to run 1 TC per VPE */
+	if (cpu_has_mipsmt)
+		dmt();
+
+	change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
+				 STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
+}
+
+static void cps_smp_finish(void)
+{
+	write_c0_compare(read_c0_count() + (8 * mips_hpt_frequency / HZ));
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpumask_set_cpu(smp_processor_id(), &mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+	local_irq_enable();
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int cps_cpu_disable(void)
+{
+	unsigned cpu = smp_processor_id();
+	struct core_boot_config *core_cfg;
+
+	if (!cpu)
+		return -EBUSY;
+
+	if (!cps_pm_support_state(CPS_PM_POWER_GATED))
+		return -EINVAL;
+
+	core_cfg = &mips_cps_core_bootcfg[current_cpu_data.core];
+	atomic_sub(1 << cpu_vpe_id(&current_cpu_data), &core_cfg->vpe_mask);
+	smp_mb__after_atomic();
+	set_cpu_online(cpu, false);
+	cpumask_clear_cpu(cpu, &cpu_callin_map);
+
+	return 0;
+}
+
+static DECLARE_COMPLETION(cpu_death_chosen);
+static unsigned cpu_death_sibling;
+static enum {
+	CPU_DEATH_HALT,
+	CPU_DEATH_POWER,
+} cpu_death;
+
+void play_dead(void)
+{
+	unsigned cpu, core;
+
+	local_irq_disable();
+	idle_task_exit();
+	cpu = smp_processor_id();
+	cpu_death = CPU_DEATH_POWER;
+
+	if (cpu_has_mipsmt) {
+		core = cpu_data[cpu].core;
+
+		/* Look for another online VPE within the core */
+		for_each_online_cpu(cpu_death_sibling) {
+			if (cpu_data[cpu_death_sibling].core != core)
+				continue;
+
+			/*
+			 * There is an online VPE within the core. Just halt
+			 * this TC and leave the core alone.
+			 */
+			cpu_death = CPU_DEATH_HALT;
+			break;
+		}
+	}
+
+	/* This CPU has chosen its way out */
+	complete(&cpu_death_chosen);
+
+	if (cpu_death == CPU_DEATH_HALT) {
+		/* Halt this TC */
+		write_c0_tchalt(TCHALT_H);
+		instruction_hazard();
+	} else {
+		/* Power down the core */
+		cps_pm_enter_state(CPS_PM_POWER_GATED);
+	}
+
+	/* This should never be reached */
+	panic("Failed to offline CPU %u", cpu);
+}
+
+static void wait_for_sibling_halt(void *ptr_cpu)
+{
+	unsigned cpu = (unsigned)ptr_cpu;
+	unsigned vpe_id = cpu_vpe_id(&cpu_data[cpu]);
+	unsigned halted;
+	unsigned long flags;
+
+	do {
+		local_irq_save(flags);
+		settc(vpe_id);
+		halted = read_tc_c0_tchalt();
+		local_irq_restore(flags);
+	} while (!(halted & TCHALT_H));
+}
+
+static void cps_cpu_die(unsigned int cpu)
+{
+	unsigned core = cpu_data[cpu].core;
+	unsigned stat;
+	int err;
+
+	/* Wait for the cpu to choose its way out */
+	if (!wait_for_completion_timeout(&cpu_death_chosen,
+					 msecs_to_jiffies(5000))) {
+		pr_err("CPU%u: didn't offline\n", cpu);
+		return;
+	}
+
+	/*
+	 * Now wait for the CPU to actually offline. Without doing this that
+	 * offlining may race with one or more of:
+	 *
+	 *   - Onlining the CPU again.
+	 *   - Powering down the core if another VPE within it is offlined.
+	 *   - A sibling VPE entering a non-coherent state.
+	 *
+	 * In the non-MT halt case (ie. infinite loop) the CPU is doing nothing
+	 * with which we could race, so do nothing.
+	 */
+	if (cpu_death == CPU_DEATH_POWER) {
+		/*
+		 * Wait for the core to enter a powered down or clock gated
+		 * state, the latter happening when a JTAG probe is connected
+		 * in which case the CPC will refuse to power down the core.
+		 */
+		do {
+			mips_cpc_lock_other(core);
+			stat = read_cpc_co_stat_conf();
+			stat &= CPC_Cx_STAT_CONF_SEQSTATE_MSK;
+			mips_cpc_unlock_other();
+		} while (stat != CPC_Cx_STAT_CONF_SEQSTATE_D0 &&
+			 stat != CPC_Cx_STAT_CONF_SEQSTATE_D2 &&
+			 stat != CPC_Cx_STAT_CONF_SEQSTATE_U2);
+
+		/* Indicate the core is powered off */
+		bitmap_clear(core_power, core, 1);
+	} else if (cpu_has_mipsmt) {
+		/*
+		 * Have a CPU with access to the offlined CPUs registers wait
+		 * for its TC to halt.
+		 */
+		err = smp_call_function_single(cpu_death_sibling,
+					       wait_for_sibling_halt,
+					       (void *)cpu, 1);
+		if (err)
+			panic("Failed to call remote sibling CPU\n");
+	}
+}
+
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static struct plat_smp_ops cps_smp_ops = {
+	.smp_setup		= cps_smp_setup,
+	.prepare_cpus		= cps_prepare_cpus,
+	.boot_secondary		= cps_boot_secondary,
+	.init_secondary		= cps_init_secondary,
+	.smp_finish		= cps_smp_finish,
+	.send_ipi_single	= gic_send_ipi_single,
+	.send_ipi_mask		= gic_send_ipi_mask,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= cps_cpu_disable,
+	.cpu_die		= cps_cpu_die,
+#endif
+};
+
+bool mips_cps_smp_in_use(void)
+{
+	extern struct plat_smp_ops *mp_ops;
+	return mp_ops == &cps_smp_ops;
+}
+
+int register_cps_smp_ops(void)
+{
+	if (!mips_cm_present()) {
+		pr_warn("MIPS CPS SMP unable to proceed without a CM\n");
+		return -ENODEV;
+	}
+
+	/* check we have a GIC - we need one for IPIs */
+	if (!(read_gcr_gic_status() & CM_GCR_GIC_STATUS_EX_MSK)) {
+		pr_warn("MIPS CPS SMP unable to proceed without a GIC\n");
+		return -ENODEV;
+	}
+
+	register_smp_ops(&cps_smp_ops);
+	return 0;
+}
diff --git a/arch/mips/kernel/smp-gic.c b/arch/mips/kernel/smp-gic.c
new file mode 100644
index 000000000..5f0ab5bcd
--- /dev/null
+++ b/arch/mips/kernel/smp-gic.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * Based on smp-cmp.c:
+ *  Copyright (C) 2007 MIPS Technologies, Inc.
+ *  Author: Chris Dearman (chris@mips.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/irqchip/mips-gic.h>
+#include <linux/printk.h>
+
+#include <asm/mips-cpc.h>
+#include <asm/smp-ops.h>
+
+void gic_send_ipi_single(int cpu, unsigned int action)
+{
+	unsigned long flags;
+	unsigned int intr;
+	unsigned int core = cpu_data[cpu].core;
+
+	pr_debug("CPU%d: %s cpu %d action %u status %08x\n",
+		 smp_processor_id(), __func__, cpu, action, read_c0_status());
+
+	local_irq_save(flags);
+
+	switch (action) {
+	case SMP_CALL_FUNCTION:
+		intr = plat_ipi_call_int_xlate(cpu);
+		break;
+
+	case SMP_RESCHEDULE_YOURSELF:
+		intr = plat_ipi_resched_int_xlate(cpu);
+		break;
+
+	default:
+		BUG();
+	}
+
+	gic_send_ipi(intr);
+
+	if (mips_cpc_present() && (core != current_cpu_data.core)) {
+		while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
+			mips_cpc_lock_other(core);
+			write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
+			mips_cpc_unlock_other();
+		}
+	}
+
+	local_irq_restore(flags);
+}
+
+void gic_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu(i, mask)
+		gic_send_ipi_single(i, action);
+}
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
new file mode 100644
index 000000000..86311a164
--- /dev/null
+++ b/arch/mips/kernel/smp-mt.c
@@ -0,0 +1,314 @@
+/*
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Copyright (C) 2004, 05, 06 MIPS Technologies, Inc.
+ *    Elizabeth Clarke (beth@mips.com)
+ *    Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/compiler.h>
+#include <linux/smp.h>
+
+#include <linux/atomic.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/mips_mt.h>
+
+static void __init smvp_copy_vpe_config(void)
+{
+	write_vpe_c0_status(
+		(read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
+
+	/* set config to be the same as vpe0, particularly kseg0 coherency alg */
+	write_vpe_c0_config( read_c0_config());
+
+	/* make sure there are no software interrupts pending */
+	write_vpe_c0_cause(0);
+
+	/* Propagate Config7 */
+	write_vpe_c0_config7(read_c0_config7());
+
+	write_vpe_c0_count(read_c0_count());
+}
+
+static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0,
+	unsigned int ncpu)
+{
+	if (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT))
+		return ncpu;
+
+	/* Deactivate all but VPE 0 */
+	if (tc != 0) {
+		unsigned long tmp = read_vpe_c0_vpeconf0();
+
+		tmp &= ~VPECONF0_VPA;
+
+		/* master VPE */
+		tmp |= VPECONF0_MVP;
+		write_vpe_c0_vpeconf0(tmp);
+
+		/* Record this as available CPU */
+		set_cpu_possible(tc, true);
+		set_cpu_present(tc, true);
+		__cpu_number_map[tc]	= ++ncpu;
+		__cpu_logical_map[ncpu] = tc;
+	}
+
+	/* Disable multi-threading with TC's */
+	write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
+
+	if (tc != 0)
+		smvp_copy_vpe_config();
+
+	return ncpu;
+}
+
+static void __init smvp_tc_init(unsigned int tc, unsigned int mvpconf0)
+{
+	unsigned long tmp;
+
+	if (!tc)
+		return;
+
+	/* bind a TC to each VPE, May as well put all excess TC's
+	   on the last VPE */
+	if (tc >= (((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1))
+		write_tc_c0_tcbind(read_tc_c0_tcbind() | ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT));
+	else {
+		write_tc_c0_tcbind(read_tc_c0_tcbind() | tc);
+
+		/* and set XTC */
+		write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (tc << VPECONF0_XTC_SHIFT));
+	}
+
+	tmp = read_tc_c0_tcstatus();
+
+	/* mark not allocated and not dynamically allocatable */
+	tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+	tmp |= TCSTATUS_IXMT;		/* interrupt exempt */
+	write_tc_c0_tcstatus(tmp);
+
+	write_tc_c0_tchalt(TCHALT_H);
+}
+
+static void vsmp_send_ipi_single(int cpu, unsigned int action)
+{
+	int i;
+	unsigned long flags;
+	int vpflags;
+
+#ifdef CONFIG_MIPS_GIC
+	if (gic_present) {
+		gic_send_ipi_single(cpu, action);
+		return;
+	}
+#endif
+	local_irq_save(flags);
+
+	vpflags = dvpe();	/* can't access the other CPU's registers whilst MVPE enabled */
+
+	switch (action) {
+	case SMP_CALL_FUNCTION:
+		i = C_SW1;
+		break;
+
+	case SMP_RESCHEDULE_YOURSELF:
+	default:
+		i = C_SW0;
+		break;
+	}
+
+	/* 1:1 mapping of vpe and tc... */
+	settc(cpu);
+	write_vpe_c0_cause(read_vpe_c0_cause() | i);
+	evpe(vpflags);
+
+	local_irq_restore(flags);
+}
+
+static void vsmp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu(i, mask)
+		vsmp_send_ipi_single(i, action);
+}
+
+static void vsmp_init_secondary(void)
+{
+#ifdef CONFIG_MIPS_GIC
+	/* This is Malta specific: IPI,performance and timer interrupts */
+	if (gic_present)
+		change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 |
+					 STATUSF_IP4 | STATUSF_IP5 |
+					 STATUSF_IP6 | STATUSF_IP7);
+	else
+#endif
+		change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 |
+					 STATUSF_IP6 | STATUSF_IP7);
+}
+
+static void vsmp_smp_finish(void)
+{
+	/* CDFIXME: remove this? */
+	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpumask_set_cpu(smp_processor_id(), &mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+	local_irq_enable();
+}
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
+ * smp_bootstrap is the place to resume from
+ * __KSTK_TOS(idle) is apparently the stack pointer
+ * (unsigned long)idle->thread_info the gp
+ * assumes a 1:1 mapping of TC => VPE
+ */
+static void vsmp_boot_secondary(int cpu, struct task_struct *idle)
+{
+	struct thread_info *gp = task_thread_info(idle);
+	dvpe();
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	settc(cpu);
+
+	/* restart */
+	write_tc_c0_tcrestart((unsigned long)&smp_bootstrap);
+
+	/* enable the tc this vpe/cpu will be running */
+	write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A);
+
+	write_tc_c0_tchalt(0);
+
+	/* enable the VPE */
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+
+	/* stack pointer */
+	write_tc_gpr_sp( __KSTK_TOS(idle));
+
+	/* global pointer */
+	write_tc_gpr_gp((unsigned long)gp);
+
+	flush_icache_range((unsigned long)gp,
+			   (unsigned long)(gp + sizeof(struct thread_info)));
+
+	/* finally out of configuration and into chaos */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	evpe(EVPE_ENABLE);
+}
+
+/*
+ * Common setup before any secondaries are started
+ * Make sure all CPU's are in a sensible state before we boot any of the
+ * secondaries
+ */
+static void __init vsmp_smp_setup(void)
+{
+	unsigned int mvpconf0, ntc, tc, ncpu = 0;
+	unsigned int nvpe;
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpumask_set_cpu(0, &mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+	if (!cpu_has_mipsmt)
+		return;
+
+	/* disable MT so we can configure */
+	dvpe();
+	dmt();
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	mvpconf0 = read_c0_mvpconf0();
+	ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT;
+
+	nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+	smp_num_siblings = nvpe;
+
+	/* we'll always have more TC's than VPE's, so loop setting everything
+	   to a sensible state */
+	for (tc = 0; tc <= ntc; tc++) {
+		settc(tc);
+
+		smvp_tc_init(tc, mvpconf0);
+		ncpu = smvp_vpe_init(tc, mvpconf0, ncpu);
+	}
+
+	/* Release config state */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/* We'll wait until starting the secondaries before starting MVPE */
+
+	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
+}
+
+static void __init vsmp_prepare_cpus(unsigned int max_cpus)
+{
+	mips_mt_set_cpuoptions();
+}
+
+struct plat_smp_ops vsmp_smp_ops = {
+	.send_ipi_single	= vsmp_send_ipi_single,
+	.send_ipi_mask		= vsmp_send_ipi_mask,
+	.init_secondary		= vsmp_init_secondary,
+	.smp_finish		= vsmp_smp_finish,
+	.boot_secondary		= vsmp_boot_secondary,
+	.smp_setup		= vsmp_smp_setup,
+	.prepare_cpus		= vsmp_prepare_cpus,
+};
+
+#ifdef CONFIG_PROC_FS
+static int proc_cpuinfo_chain_call(struct notifier_block *nfb,
+	unsigned long action_unused, void *data)
+{
+	struct proc_cpuinfo_notifier_args *pcn = data;
+	struct seq_file *m = pcn->m;
+	unsigned long n = pcn->n;
+
+	if (!cpu_has_mipsmt)
+		return NOTIFY_OK;
+
+	seq_printf(m, "VPE\t\t\t: %d\n", cpu_data[n].vpe_id);
+
+	return NOTIFY_OK;
+}
+
+static int __init proc_cpuinfo_notifier_init(void)
+{
+	return proc_cpuinfo_notifier(proc_cpuinfo_chain_call, 0);
+}
+
+subsys_initcall(proc_cpuinfo_notifier_init);
+#endif
diff --git a/arch/mips/kernel/smp-up.c b/arch/mips/kernel/smp-up.c
new file mode 100644
index 000000000..17878d71e
--- /dev/null
+++ b/arch/mips/kernel/smp-up.c
@@ -0,0 +1,78 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Symmetric Uniprocessor (TM) Support
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+/*
+ * Send inter-processor interrupt
+ */
+static void up_send_ipi_single(int cpu, unsigned int action)
+{
+	panic(KERN_ERR "%s called", __func__);
+}
+
+static inline void up_send_ipi_mask(const struct cpumask *mask,
+				    unsigned int action)
+{
+	panic(KERN_ERR "%s called", __func__);
+}
+
+/*
+ *  After we've done initial boot, this function is called to allow the
+ *  board code to clean up state, if needed
+ */
+static void up_init_secondary(void)
+{
+}
+
+static void up_smp_finish(void)
+{
+}
+
+/*
+ * Firmware CPU startup hook
+ */
+static void up_boot_secondary(int cpu, struct task_struct *idle)
+{
+}
+
+static void __init up_smp_setup(void)
+{
+}
+
+static void __init up_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int up_cpu_disable(void)
+{
+	return -ENOSYS;
+}
+
+static void up_cpu_die(unsigned int cpu)
+{
+	BUG();
+}
+#endif
+
+struct plat_smp_ops up_smp_ops = {
+	.send_ipi_single	= up_send_ipi_single,
+	.send_ipi_mask		= up_send_ipi_mask,
+	.init_secondary		= up_init_secondary,
+	.smp_finish		= up_smp_finish,
+	.boot_secondary		= up_boot_secondary,
+	.smp_setup		= up_smp_setup,
+	.prepare_cpus		= up_prepare_cpus,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= up_cpu_disable,
+	.cpu_die		= up_cpu_die,
+#endif
+};
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
new file mode 100644
index 000000000..faa46ebd9
--- /dev/null
+++ b/arch/mips/kernel/smp.c
@@ -0,0 +1,463 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * Copyright (C) 2000, 2001 Kanoj Sarcar
+ * Copyright (C) 2000, 2001 Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ * Copyright (C) 2000, 2001, 2003 Broadcom Corporation
+ */
+#include <linux/cache.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/threads.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/ftrace.h>
+
+#include <linux/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/idle.h>
+#include <asm/r4k-timer.h>
+#include <asm/mmu_context.h>
+#include <asm/time.h>
+#include <asm/setup.h>
+
+cpumask_t cpu_callin_map;		/* Bitmask of started secondaries */
+
+int __cpu_number_map[NR_CPUS];		/* Map physical to logical */
+EXPORT_SYMBOL(__cpu_number_map);
+
+int __cpu_logical_map[NR_CPUS];		/* Map logical to physical */
+EXPORT_SYMBOL(__cpu_logical_map);
+
+/* Number of TCs (or siblings in Intel speak) per CPU core */
+int smp_num_siblings = 1;
+EXPORT_SYMBOL(smp_num_siblings);
+
+/* representing the TCs (or siblings in Intel speak) of each logical CPU */
+cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(cpu_sibling_map);
+
+/* representing the core map of multi-core chips of each logical CPU */
+cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(cpu_core_map);
+
+/* representing cpus for which sibling maps can be computed */
+static cpumask_t cpu_sibling_setup_map;
+
+/* representing cpus for which core maps can be computed */
+static cpumask_t cpu_core_setup_map;
+
+cpumask_t cpu_coherent_mask;
+
+static inline void set_cpu_sibling_map(int cpu)
+{
+	int i;
+
+	cpumask_set_cpu(cpu, &cpu_sibling_setup_map);
+
+	if (smp_num_siblings > 1) {
+		for_each_cpu(i, &cpu_sibling_setup_map) {
+			if (cpu_data[cpu].package == cpu_data[i].package &&
+				    cpu_data[cpu].core == cpu_data[i].core) {
+				cpumask_set_cpu(i, &cpu_sibling_map[cpu]);
+				cpumask_set_cpu(cpu, &cpu_sibling_map[i]);
+			}
+		}
+	} else
+		cpumask_set_cpu(cpu, &cpu_sibling_map[cpu]);
+}
+
+static inline void set_cpu_core_map(int cpu)
+{
+	int i;
+
+	cpumask_set_cpu(cpu, &cpu_core_setup_map);
+
+	for_each_cpu(i, &cpu_core_setup_map) {
+		if (cpu_data[cpu].package == cpu_data[i].package) {
+			cpumask_set_cpu(i, &cpu_core_map[cpu]);
+			cpumask_set_cpu(cpu, &cpu_core_map[i]);
+		}
+	}
+}
+
+struct plat_smp_ops *mp_ops;
+EXPORT_SYMBOL(mp_ops);
+
+void register_smp_ops(struct plat_smp_ops *ops)
+{
+	if (mp_ops)
+		printk(KERN_WARNING "Overriding previously set SMP ops\n");
+
+	mp_ops = ops;
+}
+
+/*
+ * First C code run on the secondary CPUs after being started up by
+ * the master.
+ */
+asmlinkage void start_secondary(void)
+{
+	unsigned int cpu;
+
+	cpu_probe();
+	per_cpu_trap_init(false);
+	mips_clockevent_init();
+	mp_ops->init_secondary();
+	cpu_report();
+
+	/*
+	 * XXX parity protection should be folded in here when it's converted
+	 * to an option instead of something based on .cputype
+	 */
+
+	calibrate_delay();
+	preempt_disable();
+	cpu = smp_processor_id();
+	cpu_data[cpu].udelay_val = loops_per_jiffy;
+
+	cpumask_set_cpu(cpu, &cpu_coherent_mask);
+	notify_cpu_starting(cpu);
+
+	set_cpu_online(cpu, true);
+
+	set_cpu_sibling_map(cpu);
+	set_cpu_core_map(cpu);
+
+	cpumask_set_cpu(cpu, &cpu_callin_map);
+
+	synchronise_count_slave(cpu);
+
+	/*
+	 * irq will be enabled in ->smp_finish(), enabling it too early
+	 * is dangerous.
+	 */
+	WARN_ON_ONCE(!irqs_disabled());
+	mp_ops->smp_finish();
+
+	cpu_startup_entry(CPUHP_ONLINE);
+}
+
+/*
+ * Call into both interrupt handlers, as we share the IPI for them
+ */
+void __irq_entry smp_call_function_interrupt(void)
+{
+	irq_enter();
+	generic_smp_call_function_interrupt();
+	irq_exit();
+}
+
+static void stop_this_cpu(void *dummy)
+{
+	/*
+	 * Remove this CPU:
+	 */
+	set_cpu_online(smp_processor_id(), false);
+	local_irq_disable();
+	while (1);
+}
+
+void smp_send_stop(void)
+{
+	smp_call_function(stop_this_cpu, NULL, 0);
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+}
+
+/* called from main before smp_init() */
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	init_new_context(current, &init_mm);
+	current_thread_info()->cpu = 0;
+	mp_ops->prepare_cpus(max_cpus);
+	set_cpu_sibling_map(0);
+	set_cpu_core_map(0);
+#ifndef CONFIG_HOTPLUG_CPU
+	init_cpu_present(cpu_possible_mask);
+#endif
+	cpumask_copy(&cpu_coherent_mask, cpu_possible_mask);
+}
+
+/* preload SMP state for boot cpu */
+void smp_prepare_boot_cpu(void)
+{
+	set_cpu_possible(0, true);
+	set_cpu_online(0, true);
+	cpumask_set_cpu(0, &cpu_callin_map);
+}
+
+int __cpu_up(unsigned int cpu, struct task_struct *tidle)
+{
+	mp_ops->boot_secondary(cpu, tidle);
+
+	/*
+	 * Trust is futile.  We should really have timeouts ...
+	 */
+	while (!cpumask_test_cpu(cpu, &cpu_callin_map)) {
+		udelay(100);
+		schedule();
+	}
+
+	synchronise_count_master(cpu);
+	return 0;
+}
+
+/* Not really SMP stuff ... */
+int setup_profiling_timer(unsigned int multiplier)
+{
+	return 0;
+}
+
+static void flush_tlb_all_ipi(void *info)
+{
+	local_flush_tlb_all();
+}
+
+void flush_tlb_all(void)
+{
+	on_each_cpu(flush_tlb_all_ipi, NULL, 1);
+}
+
+static void flush_tlb_mm_ipi(void *mm)
+{
+	local_flush_tlb_mm((struct mm_struct *)mm);
+}
+
+/*
+ * Special Variant of smp_call_function for use by TLB functions:
+ *
+ *  o No return value
+ *  o collapses to normal function call on UP kernels
+ *  o collapses to normal function call on systems with a single shared
+ *    primary cache.
+ */
+static inline void smp_on_other_tlbs(void (*func) (void *info), void *info)
+{
+	smp_call_function(func, info, 1);
+}
+
+static inline void smp_on_each_tlb(void (*func) (void *info), void *info)
+{
+	preempt_disable();
+
+	smp_on_other_tlbs(func, info);
+	func(info);
+
+	preempt_enable();
+}
+
+/*
+ * The following tlb flush calls are invoked when old translations are
+ * being torn down, or pte attributes are changing. For single threaded
+ * address spaces, a new context is obtained on the current cpu, and tlb
+ * context on other cpus are invalidated to force a new context allocation
+ * at switch_mm time, should the mm ever be used on other cpus. For
+ * multithreaded address spaces, intercpu interrupts have to be sent.
+ * Another case where intercpu interrupts are required is when the target
+ * mm might be active on another cpu (eg debuggers doing the flushes on
+ * behalf of debugees, kswapd stealing pages from another process etc).
+ * Kanoj 07/00.
+ */
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	preempt_disable();
+
+	if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
+		smp_on_other_tlbs(flush_tlb_mm_ipi, mm);
+	} else {
+		unsigned int cpu;
+
+		for_each_online_cpu(cpu) {
+			if (cpu != smp_processor_id() && cpu_context(cpu, mm))
+				cpu_context(cpu, mm) = 0;
+		}
+	}
+	local_flush_tlb_mm(mm);
+
+	preempt_enable();
+}
+
+struct flush_tlb_data {
+	struct vm_area_struct *vma;
+	unsigned long addr1;
+	unsigned long addr2;
+};
+
+static void flush_tlb_range_ipi(void *info)
+{
+	struct flush_tlb_data *fd = info;
+
+	local_flush_tlb_range(fd->vma, fd->addr1, fd->addr2);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+{
+	struct mm_struct *mm = vma->vm_mm;
+
+	preempt_disable();
+	if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
+		struct flush_tlb_data fd = {
+			.vma = vma,
+			.addr1 = start,
+			.addr2 = end,
+		};
+
+		smp_on_other_tlbs(flush_tlb_range_ipi, &fd);
+	} else {
+		unsigned int cpu;
+
+		for_each_online_cpu(cpu) {
+			if (cpu != smp_processor_id() && cpu_context(cpu, mm))
+				cpu_context(cpu, mm) = 0;
+		}
+	}
+	local_flush_tlb_range(vma, start, end);
+	preempt_enable();
+}
+
+static void flush_tlb_kernel_range_ipi(void *info)
+{
+	struct flush_tlb_data *fd = info;
+
+	local_flush_tlb_kernel_range(fd->addr1, fd->addr2);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	struct flush_tlb_data fd = {
+		.addr1 = start,
+		.addr2 = end,
+	};
+
+	on_each_cpu(flush_tlb_kernel_range_ipi, &fd, 1);
+}
+
+static void flush_tlb_page_ipi(void *info)
+{
+	struct flush_tlb_data *fd = info;
+
+	local_flush_tlb_page(fd->vma, fd->addr1);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	preempt_disable();
+	if ((atomic_read(&vma->vm_mm->mm_users) != 1) || (current->mm != vma->vm_mm)) {
+		struct flush_tlb_data fd = {
+			.vma = vma,
+			.addr1 = page,
+		};
+
+		smp_on_other_tlbs(flush_tlb_page_ipi, &fd);
+	} else {
+		unsigned int cpu;
+
+		for_each_online_cpu(cpu) {
+			if (cpu != smp_processor_id() && cpu_context(cpu, vma->vm_mm))
+				cpu_context(cpu, vma->vm_mm) = 0;
+		}
+	}
+	local_flush_tlb_page(vma, page);
+	preempt_enable();
+}
+
+static void flush_tlb_one_ipi(void *info)
+{
+	unsigned long vaddr = (unsigned long) info;
+
+	local_flush_tlb_one(vaddr);
+}
+
+void flush_tlb_one(unsigned long vaddr)
+{
+	smp_on_each_tlb(flush_tlb_one_ipi, (void *) vaddr);
+}
+
+EXPORT_SYMBOL(flush_tlb_page);
+EXPORT_SYMBOL(flush_tlb_one);
+
+#if defined(CONFIG_KEXEC)
+void (*dump_ipi_function_ptr)(void *) = NULL;
+void dump_send_ipi(void (*dump_ipi_callback)(void *))
+{
+	int i;
+	int cpu = smp_processor_id();
+
+	dump_ipi_function_ptr = dump_ipi_callback;
+	smp_mb();
+	for_each_online_cpu(i)
+		if (i != cpu)
+			mp_ops->send_ipi_single(i, SMP_DUMP);
+
+}
+EXPORT_SYMBOL(dump_send_ipi);
+#endif
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+
+static DEFINE_PER_CPU(atomic_t, tick_broadcast_count);
+static DEFINE_PER_CPU(struct call_single_data, tick_broadcast_csd);
+
+void tick_broadcast(const struct cpumask *mask)
+{
+	atomic_t *count;
+	struct call_single_data *csd;
+	int cpu;
+
+	for_each_cpu(cpu, mask) {
+		count = &per_cpu(tick_broadcast_count, cpu);
+		csd = &per_cpu(tick_broadcast_csd, cpu);
+
+		if (atomic_inc_return(count) == 1)
+			smp_call_function_single_async(cpu, csd);
+	}
+}
+
+static void tick_broadcast_callee(void *info)
+{
+	int cpu = smp_processor_id();
+	tick_receive_broadcast();
+	atomic_set(&per_cpu(tick_broadcast_count, cpu), 0);
+}
+
+static int __init tick_broadcast_init(void)
+{
+	struct call_single_data *csd;
+	int cpu;
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		csd = &per_cpu(tick_broadcast_csd, cpu);
+		csd->func = tick_broadcast_callee;
+	}
+
+	return 0;
+}
+early_initcall(tick_broadcast_init);
+
+#endif /* CONFIG_GENERIC_CLOCKEVENTS_BROADCAST */
diff --git a/arch/mips/kernel/spinlock_test.c b/arch/mips/kernel/spinlock_test.c
new file mode 100644
index 000000000..39f7ab7b0
--- /dev/null
+++ b/arch/mips/kernel/spinlock_test.c
@@ -0,0 +1,141 @@
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/hrtimer.h>
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/export.h>
+#include <linux/spinlock.h>
+
+
+static int ss_get(void *data, u64 *val)
+{
+	ktime_t start, finish;
+	int loops;
+	int cont;
+	DEFINE_RAW_SPINLOCK(ss_spin);
+
+	loops = 1000000;
+	cont = 1;
+
+	start = ktime_get();
+
+	while (cont) {
+		raw_spin_lock(&ss_spin);
+		loops--;
+		if (loops == 0)
+			cont = 0;
+		raw_spin_unlock(&ss_spin);
+	}
+
+	finish = ktime_get();
+
+	*val = ktime_us_delta(finish, start);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_ss, ss_get, NULL, "%llu\n");
+
+
+
+struct spin_multi_state {
+	raw_spinlock_t lock;
+	atomic_t start_wait;
+	atomic_t enter_wait;
+	atomic_t exit_wait;
+	int loops;
+};
+
+struct spin_multi_per_thread {
+	struct spin_multi_state *state;
+	ktime_t start;
+};
+
+static int multi_other(void *data)
+{
+	int loops;
+	int cont;
+	struct spin_multi_per_thread *pt = data;
+	struct spin_multi_state *s = pt->state;
+
+	loops = s->loops;
+	cont = 1;
+
+	atomic_dec(&s->enter_wait);
+
+	while (atomic_read(&s->enter_wait))
+		; /* spin */
+
+	pt->start = ktime_get();
+
+	atomic_dec(&s->start_wait);
+
+	while (atomic_read(&s->start_wait))
+		; /* spin */
+
+	while (cont) {
+		raw_spin_lock(&s->lock);
+		loops--;
+		if (loops == 0)
+			cont = 0;
+		raw_spin_unlock(&s->lock);
+	}
+
+	atomic_dec(&s->exit_wait);
+	while (atomic_read(&s->exit_wait))
+		; /* spin */
+	return 0;
+}
+
+static int multi_get(void *data, u64 *val)
+{
+	ktime_t finish;
+	struct spin_multi_state ms;
+	struct spin_multi_per_thread t1, t2;
+
+	ms.lock = __RAW_SPIN_LOCK_UNLOCKED("multi_get");
+	ms.loops = 1000000;
+
+	atomic_set(&ms.start_wait, 2);
+	atomic_set(&ms.enter_wait, 2);
+	atomic_set(&ms.exit_wait, 2);
+	t1.state = &ms;
+	t2.state = &ms;
+
+	kthread_run(multi_other, &t2, "multi_get");
+
+	multi_other(&t1);
+
+	finish = ktime_get();
+
+	*val = ktime_us_delta(finish, t1.start);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_multi, multi_get, NULL, "%llu\n");
+
+
+extern struct dentry *mips_debugfs_dir;
+static int __init spinlock_test(void)
+{
+	struct dentry *d;
+
+	if (!mips_debugfs_dir)
+		return -ENODEV;
+
+	d = debugfs_create_file("spin_single", S_IRUGO,
+				mips_debugfs_dir, NULL,
+				&fops_ss);
+	if (!d)
+		return -ENOMEM;
+
+	d = debugfs_create_file("spin_multi", S_IRUGO,
+				mips_debugfs_dir, NULL,
+				&fops_multi);
+	if (!d)
+		return -ENOMEM;
+
+	return 0;
+}
+device_initcall(spinlock_test);
diff --git a/arch/mips/kernel/spram.c b/arch/mips/kernel/spram.c
new file mode 100644
index 000000000..d1168d7c3
--- /dev/null
+++ b/arch/mips/kernel/spram.c
@@ -0,0 +1,222 @@
+/*
+ * MIPS SPRAM support
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Copyright (C) 2007, 2008 MIPS Technologies, Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/stddef.h>
+
+#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/r4kcache.h>
+#include <asm/hazards.h>
+
+/*
+ * These definitions are correct for the 24K/34K/74K SPRAM sample
+ * implementation. The 4KS interpreted the tags differently...
+ */
+#define SPRAM_TAG0_ENABLE	0x00000080
+#define SPRAM_TAG0_PA_MASK	0xfffff000
+#define SPRAM_TAG1_SIZE_MASK	0xfffff000
+
+#define SPRAM_TAG_STRIDE	8
+
+#define ERRCTL_SPRAM		(1 << 28)
+
+/* errctl access */
+#define read_c0_errctl(x) read_c0_ecc(x)
+#define write_c0_errctl(x) write_c0_ecc(x)
+
+/*
+ * Different semantics to the set_c0_* function built by __BUILD_SET_C0
+ */
+static unsigned int bis_c0_errctl(unsigned int set)
+{
+	unsigned int res;
+	res = read_c0_errctl();
+	write_c0_errctl(res | set);
+	return res;
+}
+
+static void ispram_store_tag(unsigned int offset, unsigned int data)
+{
+	unsigned int errctl;
+
+	/* enable SPRAM tag access */
+	errctl = bis_c0_errctl(ERRCTL_SPRAM);
+	ehb();
+
+	write_c0_taglo(data);
+	ehb();
+
+	cache_op(Index_Store_Tag_I, CKSEG0|offset);
+	ehb();
+
+	write_c0_errctl(errctl);
+	ehb();
+}
+
+
+static unsigned int ispram_load_tag(unsigned int offset)
+{
+	unsigned int data;
+	unsigned int errctl;
+
+	/* enable SPRAM tag access */
+	errctl = bis_c0_errctl(ERRCTL_SPRAM);
+	ehb();
+	cache_op(Index_Load_Tag_I, CKSEG0 | offset);
+	ehb();
+	data = read_c0_taglo();
+	ehb();
+	write_c0_errctl(errctl);
+	ehb();
+
+	return data;
+}
+
+static void dspram_store_tag(unsigned int offset, unsigned int data)
+{
+	unsigned int errctl;
+
+	/* enable SPRAM tag access */
+	errctl = bis_c0_errctl(ERRCTL_SPRAM);
+	ehb();
+	write_c0_dtaglo(data);
+	ehb();
+	cache_op(Index_Store_Tag_D, CKSEG0 | offset);
+	ehb();
+	write_c0_errctl(errctl);
+	ehb();
+}
+
+
+static unsigned int dspram_load_tag(unsigned int offset)
+{
+	unsigned int data;
+	unsigned int errctl;
+
+	errctl = bis_c0_errctl(ERRCTL_SPRAM);
+	ehb();
+	cache_op(Index_Load_Tag_D, CKSEG0 | offset);
+	ehb();
+	data = read_c0_dtaglo();
+	ehb();
+	write_c0_errctl(errctl);
+	ehb();
+
+	return data;
+}
+
+static void probe_spram(char *type,
+	    unsigned int base,
+	    unsigned int (*read)(unsigned int),
+	    void (*write)(unsigned int, unsigned int))
+{
+	unsigned int firstsize = 0, lastsize = 0;
+	unsigned int firstpa = 0, lastpa = 0, pa = 0;
+	unsigned int offset = 0;
+	unsigned int size, tag0, tag1;
+	unsigned int enabled;
+	int i;
+
+	/*
+	 * The limit is arbitrary but avoids the loop running away if
+	 * the SPRAM tags are implemented differently
+	 */
+
+	for (i = 0; i < 8; i++) {
+		tag0 = read(offset);
+		tag1 = read(offset+SPRAM_TAG_STRIDE);
+		pr_debug("DBG %s%d: tag0=%08x tag1=%08x\n",
+			 type, i, tag0, tag1);
+
+		size = tag1 & SPRAM_TAG1_SIZE_MASK;
+
+		if (size == 0)
+			break;
+
+		if (i != 0) {
+			/* tags may repeat... */
+			if ((pa == firstpa && size == firstsize) ||
+			    (pa == lastpa && size == lastsize))
+				break;
+		}
+
+		/* Align base with size */
+		base = (base + size - 1) & ~(size-1);
+
+		/* reprogram the base address base address and enable */
+		tag0 = (base & SPRAM_TAG0_PA_MASK) | SPRAM_TAG0_ENABLE;
+		write(offset, tag0);
+
+		base += size;
+
+		/* reread the tag */
+		tag0 = read(offset);
+		pa = tag0 & SPRAM_TAG0_PA_MASK;
+		enabled = tag0 & SPRAM_TAG0_ENABLE;
+
+		if (i == 0) {
+			firstpa = pa;
+			firstsize = size;
+		}
+
+		lastpa = pa;
+		lastsize = size;
+
+		if (strcmp(type, "DSPRAM") == 0) {
+			unsigned int *vp = (unsigned int *)(CKSEG1 | pa);
+			unsigned int v;
+#define TDAT	0x5a5aa5a5
+			vp[0] = TDAT;
+			vp[1] = ~TDAT;
+
+			mb();
+
+			v = vp[0];
+			if (v != TDAT)
+				printk(KERN_ERR "vp=%p wrote=%08x got=%08x\n",
+				       vp, TDAT, v);
+			v = vp[1];
+			if (v != ~TDAT)
+				printk(KERN_ERR "vp=%p wrote=%08x got=%08x\n",
+				       vp+1, ~TDAT, v);
+		}
+
+		pr_info("%s%d: PA=%08x,Size=%08x%s\n",
+			type, i, pa, size, enabled ? ",enabled" : "");
+		offset += 2 * SPRAM_TAG_STRIDE;
+	}
+}
+void spram_config(void)
+{
+	unsigned int config0;
+
+	switch (current_cpu_type()) {
+	case CPU_24K:
+	case CPU_34K:
+	case CPU_74K:
+	case CPU_1004K:
+	case CPU_1074K:
+	case CPU_INTERAPTIV:
+	case CPU_PROAPTIV:
+	case CPU_P5600:
+	case CPU_QEMU_GENERIC:
+		config0 = read_c0_config();
+		/* FIXME: addresses are Malta specific */
+		if (config0 & (1<<24)) {
+			probe_spram("ISPRAM", 0x1c000000,
+				    &ispram_load_tag, &ispram_store_tag);
+		}
+		if (config0 & (1<<23))
+			probe_spram("DSPRAM", 0x1c100000,
+				    &dspram_load_tag, &dspram_store_tag);
+	}
+}
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
new file mode 100644
index 000000000..1ba775d24
--- /dev/null
+++ b/arch/mips/kernel/stacktrace.c
@@ -0,0 +1,87 @@
+/*
+ * Stack trace management functions
+ *
+ *  Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ */
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/export.h>
+#include <asm/stacktrace.h>
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer:
+ */
+static void save_raw_context_stack(struct stack_trace *trace,
+	unsigned long reg29)
+{
+	unsigned long *sp = (unsigned long *)reg29;
+	unsigned long addr;
+
+	while (!kstack_end(sp)) {
+		addr = *sp++;
+		if (__kernel_text_address(addr)) {
+			if (trace->skip > 0)
+				trace->skip--;
+			else
+				trace->entries[trace->nr_entries++] = addr;
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
+	}
+}
+
+static void save_context_stack(struct stack_trace *trace,
+	struct task_struct *tsk, struct pt_regs *regs)
+{
+	unsigned long sp = regs->regs[29];
+#ifdef CONFIG_KALLSYMS
+	unsigned long ra = regs->regs[31];
+	unsigned long pc = regs->cp0_epc;
+
+	if (raw_show_trace || !__kernel_text_address(pc)) {
+		unsigned long stack_page =
+			(unsigned long)task_stack_page(tsk);
+		if (stack_page && sp >= stack_page &&
+		    sp <= stack_page + THREAD_SIZE - 32)
+			save_raw_context_stack(trace, sp);
+		return;
+	}
+	do {
+		if (trace->skip > 0)
+			trace->skip--;
+		else
+			trace->entries[trace->nr_entries++] = pc;
+		if (trace->nr_entries >= trace->max_entries)
+			break;
+		pc = unwind_stack(tsk, &sp, pc, &ra);
+	} while (pc);
+#else
+	save_raw_context_stack(trace, sp);
+#endif
+}
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+	save_stack_trace_tsk(current, trace);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	struct pt_regs dummyregs;
+	struct pt_regs *regs = &dummyregs;
+
+	WARN_ON(trace->nr_entries || !trace->max_entries);
+
+	if (tsk != current) {
+		regs->regs[29] = tsk->thread.reg29;
+		regs->regs[31] = 0;
+		regs->cp0_epc = tsk->thread.reg31;
+	} else
+		prepare_frametrace(regs);
+	save_context_stack(trace, tsk, regs);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
new file mode 100644
index 000000000..2242bdd43
--- /dev/null
+++ b/arch/mips/kernel/sync-r4k.c
@@ -0,0 +1,132 @@
+/*
+ * Count register synchronisation.
+ *
+ * All CPUs will have their count registers synchronised to the CPU0 next time
+ * value. This can cause a small timewarp for CPU0. All other CPU's should
+ * not have done anything significant (but they may have had interrupts
+ * enabled briefly - prom_smp_finish() should not be responsible for enabling
+ * interrupts...)
+ */
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+#include <linux/cpumask.h>
+
+#include <asm/r4k-timer.h>
+#include <linux/atomic.h>
+#include <asm/barrier.h>
+#include <asm/mipsregs.h>
+
+static atomic_t count_start_flag = ATOMIC_INIT(0);
+static atomic_t count_count_start = ATOMIC_INIT(0);
+static atomic_t count_count_stop = ATOMIC_INIT(0);
+static atomic_t count_reference = ATOMIC_INIT(0);
+
+#define COUNTON 100
+#define NR_LOOPS 5
+
+void synchronise_count_master(int cpu)
+{
+	int i;
+	unsigned long flags;
+	unsigned int initcount;
+
+	printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu);
+
+	local_irq_save(flags);
+
+	/*
+	 * Notify the slaves that it's time to start
+	 */
+	atomic_set(&count_reference, read_c0_count());
+	atomic_set(&count_start_flag, cpu);
+	smp_wmb();
+
+	/* Count will be initialised to current timer for all CPU's */
+	initcount = read_c0_count();
+
+	/*
+	 * We loop a few times to get a primed instruction cache,
+	 * then the last pass is more or less synchronised and
+	 * the master and slaves each set their cycle counters to a known
+	 * value all at once. This reduces the chance of having random offsets
+	 * between the processors, and guarantees that the maximum
+	 * delay between the cycle counters is never bigger than
+	 * the latency of information-passing (cachelines) between
+	 * two CPUs.
+	 */
+
+	for (i = 0; i < NR_LOOPS; i++) {
+		/* slaves loop on '!= 2' */
+		while (atomic_read(&count_count_start) != 1)
+			mb();
+		atomic_set(&count_count_stop, 0);
+		smp_wmb();
+
+		/* this lets the slaves write their count register */
+		atomic_inc(&count_count_start);
+
+		/*
+		 * Everyone initialises count in the last loop:
+		 */
+		if (i == NR_LOOPS-1)
+			write_c0_count(initcount);
+
+		/*
+		 * Wait for all slaves to leave the synchronization point:
+		 */
+		while (atomic_read(&count_count_stop) != 1)
+			mb();
+		atomic_set(&count_count_start, 0);
+		smp_wmb();
+		atomic_inc(&count_count_stop);
+	}
+	/* Arrange for an interrupt in a short while */
+	write_c0_compare(read_c0_count() + COUNTON);
+	atomic_set(&count_start_flag, 0);
+
+	local_irq_restore(flags);
+
+	/*
+	 * i386 code reported the skew here, but the
+	 * count registers were almost certainly out of sync
+	 * so no point in alarming people
+	 */
+	printk("done.\n");
+}
+
+void synchronise_count_slave(int cpu)
+{
+	int i;
+	unsigned int initcount;
+
+	/*
+	 * Not every cpu is online at the time this gets called,
+	 * so we first wait for the master to say everyone is ready
+	 */
+
+	while (atomic_read(&count_start_flag) != cpu)
+		mb();
+
+	/* Count will be initialised to next expire for all CPU's */
+	initcount = atomic_read(&count_reference);
+
+	for (i = 0; i < NR_LOOPS; i++) {
+		atomic_inc(&count_count_start);
+		while (atomic_read(&count_count_start) != 2)
+			mb();
+
+		/*
+		 * Everyone initialises count in the last loop:
+		 */
+		if (i == NR_LOOPS-1)
+			write_c0_count(initcount);
+
+		atomic_inc(&count_count_stop);
+		while (atomic_read(&count_count_stop) != 2)
+			mb();
+	}
+	/* Arrange for an interrupt in a short while */
+	write_c0_compare(read_c0_count() + COUNTON);
+}
+#undef NR_LOOPS
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
new file mode 100644
index 000000000..53a7ef9a8
--- /dev/null
+++ b/arch/mips/kernel/syscall.c
@@ -0,0 +1,246 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 2000, 2001, 05 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#include <linux/capability.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <linux/fs.h>
+#include <linux/smp.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/syscalls.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+#include <linux/unistd.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/compiler.h>
+#include <linux/ipc.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/elf.h>
+
+#include <asm/asm.h>
+#include <asm/branch.h>
+#include <asm/cachectl.h>
+#include <asm/cacheflush.h>
+#include <asm/asm-offsets.h>
+#include <asm/signal.h>
+#include <asm/sim.h>
+#include <asm/shmparam.h>
+#include <asm/sysmips.h>
+#include <asm/uaccess.h>
+#include <asm/switch_to.h>
+
+/*
+ * For historic reasons the pipe(2) syscall on MIPS has an unusual calling
+ * convention.	It returns results in registers $v0 / $v1 which means there
+ * is no need for it to do verify the validity of a userspace pointer
+ * argument.  Historically that used to be expensive in Linux.	These days
+ * the performance advantage is negligible.
+ */
+asmlinkage int sysm_pipe(void)
+{
+	int fd[2];
+	int error = do_pipe_flags(fd, 0);
+	if (error)
+		return error;
+	current_pt_regs()->regs[3] = fd[1];
+	return fd[0];
+}
+
+SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
+	unsigned long, prot, unsigned long, flags, unsigned long,
+	fd, off_t, offset)
+{
+	unsigned long result;
+
+	result = -EINVAL;
+	if (offset & ~PAGE_MASK)
+		goto out;
+
+	result = sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+
+out:
+	return result;
+}
+
+SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len,
+	unsigned long, prot, unsigned long, flags, unsigned long, fd,
+	unsigned long, pgoff)
+{
+	if (pgoff & (~PAGE_MASK >> 12))
+		return -EINVAL;
+
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT-12));
+}
+
+save_static_function(sys_fork);
+save_static_function(sys_clone);
+
+SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
+{
+	struct thread_info *ti = task_thread_info(current);
+
+	ti->tp_value = addr;
+	if (cpu_has_userlocal)
+		write_c0_userlocal(addr);
+
+	return 0;
+}
+
+static inline int mips_atomic_set(unsigned long addr, unsigned long new)
+{
+	unsigned long old, tmp;
+	struct pt_regs *regs;
+	unsigned int err;
+
+	if (unlikely(addr & 3))
+		return -EINVAL;
+
+	if (unlikely(!access_ok(VERIFY_WRITE, addr, 4)))
+		return -EINVAL;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__ (
+		"	.set	arch=r4000				\n"
+		"	li	%[err], 0				\n"
+		"1:	ll	%[old], (%[addr])			\n"
+		"	move	%[tmp], %[new]				\n"
+		"2:	sc	%[tmp], (%[addr])			\n"
+		"	beqzl	%[tmp], 1b				\n"
+		"3:							\n"
+		"	.insn						\n"
+		"	.section .fixup,\"ax\"				\n"
+		"4:	li	%[err], %[efault]			\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"STR(PTR)"	1b, 4b				\n"
+		"	"STR(PTR)"	2b, 4b				\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: [old] "=&r" (old),
+		  [err] "=&r" (err),
+		  [tmp] "=&r" (tmp)
+		: [addr] "r" (addr),
+		  [new] "r" (new),
+		  [efault] "i" (-EFAULT)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__ (
+		"	.set	"MIPS_ISA_ARCH_LEVEL"			\n"
+		"	li	%[err], 0				\n"
+		"1:	ll	%[old], (%[addr])			\n"
+		"	move	%[tmp], %[new]				\n"
+		"2:	sc	%[tmp], (%[addr])			\n"
+		"	bnez	%[tmp], 4f				\n"
+		"3:							\n"
+		"	.insn						\n"
+		"	.subsection 2					\n"
+		"4:	b	1b					\n"
+		"	.previous					\n"
+		"							\n"
+		"	.section .fixup,\"ax\"				\n"
+		"5:	li	%[err], %[efault]			\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"STR(PTR)"	1b, 5b				\n"
+		"	"STR(PTR)"	2b, 5b				\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: [old] "=&r" (old),
+		  [err] "=&r" (err),
+		  [tmp] "=&r" (tmp)
+		: [addr] "r" (addr),
+		  [new] "r" (new),
+		  [efault] "i" (-EFAULT)
+		: "memory");
+	} else {
+		do {
+			preempt_disable();
+			ll_bit = 1;
+			ll_task = current;
+			preempt_enable();
+
+			err = __get_user(old, (unsigned int *) addr);
+			err |= __put_user(new, (unsigned int *) addr);
+			if (err)
+				break;
+			rmb();
+		} while (!ll_bit);
+	}
+
+	if (unlikely(err))
+		return err;
+
+	regs = current_pt_regs();
+	regs->regs[2] = old;
+	regs->regs[7] = 0;	/* No error */
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	__asm__ __volatile__(
+	"	move	$29, %0						\n"
+	"	j	syscall_exit					\n"
+	: /* no outputs */
+	: "r" (regs));
+
+	/* unreached.  Honestly.  */
+	unreachable();
+}
+
+SYSCALL_DEFINE3(sysmips, long, cmd, long, arg1, long, arg2)
+{
+	switch (cmd) {
+	case MIPS_ATOMIC_SET:
+		return mips_atomic_set(arg1, arg2);
+
+	case MIPS_FIXADE:
+		if (arg1 & ~3)
+			return -EINVAL;
+
+		if (arg1 & 1)
+			set_thread_flag(TIF_FIXADE);
+		else
+			clear_thread_flag(TIF_FIXADE);
+		if (arg1 & 2)
+			set_thread_flag(TIF_LOGADE);
+		else
+			clear_thread_flag(TIF_LOGADE);
+
+		return 0;
+
+	case FLUSH_CACHE:
+		__flush_cache_all();
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/*
+ * No implemented yet ...
+ */
+SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op)
+{
+	return -ENOSYS;
+}
+
+/*
+ * If we ever come here the user sp is bad.  Zap the process right away.
+ * Due to the bad stack signaling wouldn't work.
+ */
+asmlinkage void bad_stack(void)
+{
+	do_exit(SIGSEGV);
+}
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
new file mode 100644
index 000000000..8d0170969
--- /dev/null
+++ b/arch/mips/kernel/time.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (c) 2003, 2004  Maciej W. Rozycki
+ *
+ * Common time service routines for MIPS machines.
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/bug.h>
+#include <linux/clockchips.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+
+#include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
+#include <asm/div64.h>
+#include <asm/time.h>
+
+/*
+ * forward reference
+ */
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
+int __weak rtc_mips_set_time(unsigned long sec)
+{
+	return 0;
+}
+
+int __weak rtc_mips_set_mmss(unsigned long nowtime)
+{
+	return rtc_mips_set_time(nowtime);
+}
+
+int update_persistent_clock(struct timespec now)
+{
+	return rtc_mips_set_mmss(now.tv_sec);
+}
+
+static int null_perf_irq(void)
+{
+	return 0;
+}
+
+int (*perf_irq)(void) = null_perf_irq;
+
+EXPORT_SYMBOL(perf_irq);
+
+/*
+ * time_init() - it does the following things.
+ *
+ * 1) plat_time_init() -
+ *	a) (optional) set up RTC routines,
+ *	b) (optional) calibrate and set the mips_hpt_frequency
+ *	    (only needed if you intended to use cpu counter as timer interrupt
+ *	     source)
+ * 2) calculate a couple of cached variables for later usage
+ */
+
+unsigned int mips_hpt_frequency;
+
+/*
+ * This function exists in order to cause an error due to a duplicate
+ * definition if platform code should have its own implementation.  The hook
+ * to use instead is plat_time_init.  plat_time_init does not receive the
+ * irqaction pointer argument anymore.	This is because any function which
+ * initializes an interrupt timer now takes care of its own request_irq rsp.
+ * setup_irq calls and each clock_event_device should use its own
+ * struct irqrequest.
+ */
+void __init plat_timer_setup(void)
+{
+	BUG();
+}
+
+static __init int cpu_has_mfc0_count_bug(void)
+{
+	switch (current_cpu_type()) {
+	case CPU_R4000PC:
+	case CPU_R4000SC:
+	case CPU_R4000MC:
+		/*
+		 * V3.0 is documented as suffering from the mfc0 from count bug.
+		 * Afaik this is the last version of the R4000.	 Later versions
+		 * were marketed as R4400.
+		 */
+		return 1;
+
+	case CPU_R4400PC:
+	case CPU_R4400SC:
+	case CPU_R4400MC:
+		/*
+		 * The published errata for the R4400 up to 3.0 say the CPU
+		 * has the mfc0 from count bug.
+		 */
+		if ((current_cpu_data.processor_id & 0xff) <= 0x30)
+			return 1;
+
+		/*
+		 * we assume newer revisions are ok
+		 */
+		return 0;
+	}
+
+	return 0;
+}
+
+void __init time_init(void)
+{
+	plat_time_init();
+
+	/*
+	 * The use of the R4k timer as a clock event takes precedence;
+	 * if reading the Count register might interfere with the timer
+	 * interrupt, then we don't use the timer as a clock source.
+	 * We may still use the timer as a clock source though if the
+	 * timer interrupt isn't reliable; the interference doesn't
+	 * matter then, because we don't use the interrupt.
+	 */
+	if (mips_clockevent_init() != 0 || !cpu_has_mfc0_count_bug())
+		init_mips_clocksource();
+}
diff --git a/arch/mips/kernel/topology.c b/arch/mips/kernel/topology.c
new file mode 100644
index 000000000..cf3eb61fa
--- /dev/null
+++ b/arch/mips/kernel/topology.c
@@ -0,0 +1,32 @@
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/node.h>
+#include <linux/nodemask.h>
+#include <linux/percpu.h>
+
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
+static int __init topology_init(void)
+{
+	int i, ret;
+
+#ifdef CONFIG_NUMA
+	for_each_online_node(i)
+		register_one_node(i);
+#endif /* CONFIG_NUMA */
+
+	for_each_present_cpu(i) {
+		struct cpu *c = &per_cpu(cpu_devices, i);
+
+		c->hotpluggable = 1;
+		ret = register_cpu(c, i);
+		if (ret)
+			printk(KERN_WARNING "topology_init: register_cpu %d "
+			       "failed (%d)\n", i, ret);
+	}
+
+	return 0;
+}
+
+subsys_initcall(topology_init);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
new file mode 100644
index 000000000..d2d1c1933
--- /dev/null
+++ b/arch/mips/kernel/traps.c
@@ -0,0 +1,2377 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 01, 06 Ralf Baechle
+ * Copyright (C) 1995, 1996 Paul M. Antoine
+ * Copyright (C) 1998 Ulf Carlsson
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2002, 2003, 2004, 2005, 2007  Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2012 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2014, Imagination Technologies Ltd.
+ */
+#include <linux/bitops.h>
+#include <linux/bug.h>
+#include <linux/compiler.h>
+#include <linux/context_tracking.h>
+#include <linux/cpu_pm.h>
+#include <linux/kexec.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/kallsyms.h>
+#include <linux/bootmem.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/kprobes.h>
+#include <linux/notifier.h>
+#include <linux/kdb.h>
+#include <linux/irq.h>
+#include <linux/perf_event.h>
+
+#include <asm/bootinfo.h>
+#include <asm/branch.h>
+#include <asm/break.h>
+#include <asm/cop2.h>
+#include <asm/cpu.h>
+#include <asm/cpu-type.h>
+#include <asm/dsp.h>
+#include <asm/fpu.h>
+#include <asm/fpu_emulator.h>
+#include <asm/idle.h>
+#include <asm/mips-r2-to-r6-emul.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/module.h>
+#include <asm/msa.h>
+#include <asm/pgtable.h>
+#include <asm/ptrace.h>
+#include <asm/sections.h>
+#include <asm/tlbdebug.h>
+#include <asm/traps.h>
+#include <asm/uaccess.h>
+#include <asm/watch.h>
+#include <asm/mmu_context.h>
+#include <asm/types.h>
+#include <asm/stacktrace.h>
+#include <asm/uasm.h>
+
+extern void check_wait(void);
+extern asmlinkage void rollback_handle_int(void);
+extern asmlinkage void handle_int(void);
+extern u32 handle_tlbl[];
+extern u32 handle_tlbs[];
+extern u32 handle_tlbm[];
+extern asmlinkage void handle_adel(void);
+extern asmlinkage void handle_ades(void);
+extern asmlinkage void handle_ibe(void);
+extern asmlinkage void handle_dbe(void);
+extern asmlinkage void handle_sys(void);
+extern asmlinkage void handle_bp(void);
+extern asmlinkage void handle_ri(void);
+extern asmlinkage void handle_ri_rdhwr_vivt(void);
+extern asmlinkage void handle_ri_rdhwr(void);
+extern asmlinkage void handle_cpu(void);
+extern asmlinkage void handle_ov(void);
+extern asmlinkage void handle_tr(void);
+extern asmlinkage void handle_msa_fpe(void);
+extern asmlinkage void handle_fpe(void);
+extern asmlinkage void handle_ftlb(void);
+extern asmlinkage void handle_msa(void);
+extern asmlinkage void handle_mdmx(void);
+extern asmlinkage void handle_watch(void);
+extern asmlinkage void handle_mt(void);
+extern asmlinkage void handle_dsp(void);
+extern asmlinkage void handle_mcheck(void);
+extern asmlinkage void handle_reserved(void);
+extern void tlb_do_page_fault_0(void);
+
+void (*board_be_init)(void);
+int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+void (*board_nmi_handler_setup)(void);
+void (*board_ejtag_handler_setup)(void);
+void (*board_bind_eic_interrupt)(int irq, int regset);
+void (*board_ebase_setup)(void);
+void(*board_cache_error_setup)(void);
+
+static void show_raw_backtrace(unsigned long reg29)
+{
+	unsigned long *sp = (unsigned long *)(reg29 & ~3);
+	unsigned long addr;
+
+	printk("Call Trace:");
+#ifdef CONFIG_KALLSYMS
+	printk("\n");
+#endif
+	while (!kstack_end(sp)) {
+		unsigned long __user *p =
+			(unsigned long __user *)(unsigned long)sp++;
+		if (__get_user(addr, p)) {
+			printk(" (Bad stack address)");
+			break;
+		}
+		if (__kernel_text_address(addr))
+			print_ip_sym(addr);
+	}
+	printk("\n");
+}
+
+#ifdef CONFIG_KALLSYMS
+int raw_show_trace;
+static int __init set_raw_show_trace(char *str)
+{
+	raw_show_trace = 1;
+	return 1;
+}
+__setup("raw_show_trace", set_raw_show_trace);
+#endif
+
+static void show_backtrace(struct task_struct *task, const struct pt_regs *regs)
+{
+	unsigned long sp = regs->regs[29];
+	unsigned long ra = regs->regs[31];
+	unsigned long pc = regs->cp0_epc;
+
+	if (!task)
+		task = current;
+
+	if (raw_show_trace || !__kernel_text_address(pc)) {
+		show_raw_backtrace(sp);
+		return;
+	}
+	printk("Call Trace:\n");
+	do {
+		print_ip_sym(pc);
+		pc = unwind_stack(task, &sp, pc, &ra);
+	} while (pc);
+	printk("\n");
+}
+
+/*
+ * This routine abuses get_user()/put_user() to reference pointers
+ * with at least a bit of error checking ...
+ */
+static void show_stacktrace(struct task_struct *task,
+	const struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+	long stackdata;
+	int i;
+	unsigned long __user *sp = (unsigned long __user *)regs->regs[29];
+
+	printk("Stack :");
+	i = 0;
+	while ((unsigned long) sp & (PAGE_SIZE - 1)) {
+		if (i && ((i % (64 / field)) == 0))
+			printk("\n	 ");
+		if (i > 39) {
+			printk(" ...");
+			break;
+		}
+
+		if (__get_user(stackdata, sp++)) {
+			printk(" (Bad stack address)");
+			break;
+		}
+
+		printk(" %0*lx", field, stackdata);
+		i++;
+	}
+	printk("\n");
+	show_backtrace(task, regs);
+}
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+	struct pt_regs regs;
+	if (sp) {
+		regs.regs[29] = (unsigned long)sp;
+		regs.regs[31] = 0;
+		regs.cp0_epc = 0;
+	} else {
+		if (task && task != current) {
+			regs.regs[29] = task->thread.reg29;
+			regs.regs[31] = 0;
+			regs.cp0_epc = task->thread.reg31;
+#ifdef CONFIG_KGDB_KDB
+		} else if (atomic_read(&kgdb_active) != -1 &&
+			   kdb_current_regs) {
+			memcpy(&regs, kdb_current_regs, sizeof(regs));
+#endif /* CONFIG_KGDB_KDB */
+		} else {
+			prepare_frametrace(&regs);
+		}
+	}
+	show_stacktrace(task, &regs);
+}
+
+static void show_code(unsigned int __user *pc)
+{
+	long i;
+	unsigned short __user *pc16 = NULL;
+
+	printk("\nCode:");
+
+	if ((unsigned long)pc & 1)
+		pc16 = (unsigned short __user *)((unsigned long)pc & ~1);
+	for(i = -3 ; i < 6 ; i++) {
+		unsigned int insn;
+		if (pc16 ? __get_user(insn, pc16 + i) : __get_user(insn, pc + i)) {
+			printk(" (Bad address in epc)\n");
+			break;
+		}
+		printk("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>'));
+	}
+}
+
+static void __show_regs(const struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+	unsigned int cause = regs->cp0_cause;
+	int i;
+
+	show_regs_print_info(KERN_DEFAULT);
+
+	/*
+	 * Saved main processor registers
+	 */
+	for (i = 0; i < 32; ) {
+		if ((i % 4) == 0)
+			printk("$%2d   :", i);
+		if (i == 0)
+			printk(" %0*lx", field, 0UL);
+		else if (i == 26 || i == 27)
+			printk(" %*s", field, "");
+		else
+			printk(" %0*lx", field, regs->regs[i]);
+
+		i++;
+		if ((i % 4) == 0)
+			printk("\n");
+	}
+
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	printk("Acx    : %0*lx\n", field, regs->acx);
+#endif
+	printk("Hi    : %0*lx\n", field, regs->hi);
+	printk("Lo    : %0*lx\n", field, regs->lo);
+
+	/*
+	 * Saved cp0 registers
+	 */
+	printk("epc   : %0*lx %pS\n", field, regs->cp0_epc,
+	       (void *) regs->cp0_epc);
+	printk("ra    : %0*lx %pS\n", field, regs->regs[31],
+	       (void *) regs->regs[31]);
+
+	printk("Status: %08x	", (uint32_t) regs->cp0_status);
+
+	if (cpu_has_3kex) {
+		if (regs->cp0_status & ST0_KUO)
+			printk("KUo ");
+		if (regs->cp0_status & ST0_IEO)
+			printk("IEo ");
+		if (regs->cp0_status & ST0_KUP)
+			printk("KUp ");
+		if (regs->cp0_status & ST0_IEP)
+			printk("IEp ");
+		if (regs->cp0_status & ST0_KUC)
+			printk("KUc ");
+		if (regs->cp0_status & ST0_IEC)
+			printk("IEc ");
+	} else if (cpu_has_4kex) {
+		if (regs->cp0_status & ST0_KX)
+			printk("KX ");
+		if (regs->cp0_status & ST0_SX)
+			printk("SX ");
+		if (regs->cp0_status & ST0_UX)
+			printk("UX ");
+		switch (regs->cp0_status & ST0_KSU) {
+		case KSU_USER:
+			printk("USER ");
+			break;
+		case KSU_SUPERVISOR:
+			printk("SUPERVISOR ");
+			break;
+		case KSU_KERNEL:
+			printk("KERNEL ");
+			break;
+		default:
+			printk("BAD_MODE ");
+			break;
+		}
+		if (regs->cp0_status & ST0_ERL)
+			printk("ERL ");
+		if (regs->cp0_status & ST0_EXL)
+			printk("EXL ");
+		if (regs->cp0_status & ST0_IE)
+			printk("IE ");
+	}
+	printk("\n");
+
+	printk("Cause : %08x\n", cause);
+
+	cause = (cause & CAUSEF_EXCCODE) >> CAUSEB_EXCCODE;
+	if (1 <= cause && cause <= 5)
+		printk("BadVA : %0*lx\n", field, regs->cp0_badvaddr);
+
+	printk("PrId  : %08x (%s)\n", read_c0_prid(),
+	       cpu_name_string());
+}
+
+/*
+ * FIXME: really the generic show_regs should take a const pointer argument.
+ */
+void show_regs(struct pt_regs *regs)
+{
+	__show_regs((struct pt_regs *)regs);
+}
+
+void show_registers(struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+	mm_segment_t old_fs = get_fs();
+
+	__show_regs(regs);
+	print_modules();
+	printk("Process %s (pid: %d, threadinfo=%p, task=%p, tls=%0*lx)\n",
+	       current->comm, current->pid, current_thread_info(), current,
+	      field, current_thread_info()->tp_value);
+	if (cpu_has_userlocal) {
+		unsigned long tls;
+
+		tls = read_c0_userlocal();
+		if (tls != current_thread_info()->tp_value)
+			printk("*HwTLS: %0*lx\n", field, tls);
+	}
+
+	if (!user_mode(regs))
+		/* Necessary for getting the correct stack content */
+		set_fs(KERNEL_DS);
+	show_stacktrace(current, regs);
+	show_code((unsigned int __user *) regs->cp0_epc);
+	printk("\n");
+	set_fs(old_fs);
+}
+
+static int regs_to_trapnr(struct pt_regs *regs)
+{
+	return (regs->cp0_cause >> 2) & 0x1f;
+}
+
+static DEFINE_RAW_SPINLOCK(die_lock);
+
+void __noreturn die(const char *str, struct pt_regs *regs)
+{
+	static int die_counter;
+	int sig = SIGSEGV;
+
+	oops_enter();
+
+	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs),
+		       SIGSEGV) == NOTIFY_STOP)
+		sig = 0;
+
+	console_verbose();
+	raw_spin_lock_irq(&die_lock);
+	bust_spinlocks(1);
+
+	printk("%s[#%d]:\n", str, ++die_counter);
+	show_registers(regs);
+	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
+	raw_spin_unlock_irq(&die_lock);
+
+	oops_exit();
+
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+
+	if (panic_on_oops) {
+		printk(KERN_EMERG "Fatal exception: panic in 5 seconds");
+		ssleep(5);
+		panic("Fatal exception");
+	}
+
+	if (regs && kexec_should_crash(current))
+		crash_kexec(regs);
+
+	do_exit(sig);
+}
+
+extern struct exception_table_entry __start___dbe_table[];
+extern struct exception_table_entry __stop___dbe_table[];
+
+__asm__(
+"	.section	__dbe_table, \"a\"\n"
+"	.previous			\n");
+
+/* Given an address, look for it in the exception tables. */
+static const struct exception_table_entry *search_dbe_tables(unsigned long addr)
+{
+	const struct exception_table_entry *e;
+
+	e = search_extable(__start___dbe_table, __stop___dbe_table - 1, addr);
+	if (!e)
+		e = search_module_dbetables(addr);
+	return e;
+}
+
+asmlinkage void do_be(struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+	const struct exception_table_entry *fixup = NULL;
+	int data = regs->cp0_cause & 4;
+	int action = MIPS_BE_FATAL;
+	enum ctx_state prev_state;
+
+	prev_state = exception_enter();
+	/* XXX For now.	 Fixme, this searches the wrong table ...  */
+	if (data && !user_mode(regs))
+		fixup = search_dbe_tables(exception_epc(regs));
+
+	if (fixup)
+		action = MIPS_BE_FIXUP;
+
+	if (board_be_handler)
+		action = board_be_handler(regs, fixup != NULL);
+
+	switch (action) {
+	case MIPS_BE_DISCARD:
+		goto out;
+	case MIPS_BE_FIXUP:
+		if (fixup) {
+			regs->cp0_epc = fixup->nextinsn;
+			goto out;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * Assume it would be too dangerous to continue ...
+	 */
+	printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
+	       data ? "Data" : "Instruction",
+	       field, regs->cp0_epc, field, regs->regs[31]);
+	if (notify_die(DIE_OOPS, "bus error", regs, 0, regs_to_trapnr(regs),
+		       SIGBUS) == NOTIFY_STOP)
+		goto out;
+
+	die_if_kernel("Oops", regs);
+	force_sig(SIGBUS, current);
+
+out:
+	exception_exit(prev_state);
+}
+
+/*
+ * ll/sc, rdhwr, sync emulation
+ */
+
+#define OPCODE 0xfc000000
+#define BASE   0x03e00000
+#define RT     0x001f0000
+#define OFFSET 0x0000ffff
+#define LL     0xc0000000
+#define SC     0xe0000000
+#define SPEC0  0x00000000
+#define SPEC3  0x7c000000
+#define RD     0x0000f800
+#define FUNC   0x0000003f
+#define SYNC   0x0000000f
+#define RDHWR  0x0000003b
+
+/*  microMIPS definitions   */
+#define MM_POOL32A_FUNC 0xfc00ffff
+#define MM_RDHWR        0x00006b3c
+#define MM_RS           0x001f0000
+#define MM_RT           0x03e00000
+
+/*
+ * The ll_bit is cleared by r*_switch.S
+ */
+
+unsigned int ll_bit;
+struct task_struct *ll_task;
+
+static inline int simulate_ll(struct pt_regs *regs, unsigned int opcode)
+{
+	unsigned long value, __user *vaddr;
+	long offset;
+
+	/*
+	 * analyse the ll instruction that just caused a ri exception
+	 * and put the referenced address to addr.
+	 */
+
+	/* sign extend offset */
+	offset = opcode & OFFSET;
+	offset <<= 16;
+	offset >>= 16;
+
+	vaddr = (unsigned long __user *)
+		((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+
+	if ((unsigned long)vaddr & 3)
+		return SIGBUS;
+	if (get_user(value, vaddr))
+		return SIGSEGV;
+
+	preempt_disable();
+
+	if (ll_task == NULL || ll_task == current) {
+		ll_bit = 1;
+	} else {
+		ll_bit = 0;
+	}
+	ll_task = current;
+
+	preempt_enable();
+
+	regs->regs[(opcode & RT) >> 16] = value;
+
+	return 0;
+}
+
+static inline int simulate_sc(struct pt_regs *regs, unsigned int opcode)
+{
+	unsigned long __user *vaddr;
+	unsigned long reg;
+	long offset;
+
+	/*
+	 * analyse the sc instruction that just caused a ri exception
+	 * and put the referenced address to addr.
+	 */
+
+	/* sign extend offset */
+	offset = opcode & OFFSET;
+	offset <<= 16;
+	offset >>= 16;
+
+	vaddr = (unsigned long __user *)
+		((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+	reg = (opcode & RT) >> 16;
+
+	if ((unsigned long)vaddr & 3)
+		return SIGBUS;
+
+	preempt_disable();
+
+	if (ll_bit == 0 || ll_task != current) {
+		regs->regs[reg] = 0;
+		preempt_enable();
+		return 0;
+	}
+
+	preempt_enable();
+
+	if (put_user(regs->regs[reg], vaddr))
+		return SIGSEGV;
+
+	regs->regs[reg] = 1;
+
+	return 0;
+}
+
+/*
+ * ll uses the opcode of lwc0 and sc uses the opcode of swc0.  That is both
+ * opcodes are supposed to result in coprocessor unusable exceptions if
+ * executed on ll/sc-less processors.  That's the theory.  In practice a
+ * few processors such as NEC's VR4100 throw reserved instruction exceptions
+ * instead, so we're doing the emulation thing in both exception handlers.
+ */
+static int simulate_llsc(struct pt_regs *regs, unsigned int opcode)
+{
+	if ((opcode & OPCODE) == LL) {
+		perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,
+				1, regs, 0);
+		return simulate_ll(regs, opcode);
+	}
+	if ((opcode & OPCODE) == SC) {
+		perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,
+				1, regs, 0);
+		return simulate_sc(regs, opcode);
+	}
+
+	return -1;			/* Must be something else ... */
+}
+
+/*
+ * Simulate trapping 'rdhwr' instructions to provide user accessible
+ * registers not implemented in hardware.
+ */
+static int simulate_rdhwr(struct pt_regs *regs, int rd, int rt)
+{
+	struct thread_info *ti = task_thread_info(current);
+
+	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,
+			1, regs, 0);
+	switch (rd) {
+	case 0:		/* CPU number */
+		regs->regs[rt] = smp_processor_id();
+		return 0;
+	case 1:		/* SYNCI length */
+		regs->regs[rt] = min(current_cpu_data.dcache.linesz,
+				     current_cpu_data.icache.linesz);
+		return 0;
+	case 2:		/* Read count register */
+		regs->regs[rt] = read_c0_count();
+		return 0;
+	case 3:		/* Count register resolution */
+		switch (current_cpu_type()) {
+		case CPU_20KC:
+		case CPU_25KF:
+			regs->regs[rt] = 1;
+			break;
+		default:
+			regs->regs[rt] = 2;
+		}
+		return 0;
+	case 29:
+		regs->regs[rt] = ti->tp_value;
+		return 0;
+	default:
+		return -1;
+	}
+}
+
+static int simulate_rdhwr_normal(struct pt_regs *regs, unsigned int opcode)
+{
+	if ((opcode & OPCODE) == SPEC3 && (opcode & FUNC) == RDHWR) {
+		int rd = (opcode & RD) >> 11;
+		int rt = (opcode & RT) >> 16;
+
+		simulate_rdhwr(regs, rd, rt);
+		return 0;
+	}
+
+	/* Not ours.  */
+	return -1;
+}
+
+static int simulate_rdhwr_mm(struct pt_regs *regs, unsigned short opcode)
+{
+	if ((opcode & MM_POOL32A_FUNC) == MM_RDHWR) {
+		int rd = (opcode & MM_RS) >> 16;
+		int rt = (opcode & MM_RT) >> 21;
+		simulate_rdhwr(regs, rd, rt);
+		return 0;
+	}
+
+	/* Not ours.  */
+	return -1;
+}
+
+static int simulate_sync(struct pt_regs *regs, unsigned int opcode)
+{
+	if ((opcode & OPCODE) == SPEC0 && (opcode & FUNC) == SYNC) {
+		perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,
+				1, regs, 0);
+		return 0;
+	}
+
+	return -1;			/* Must be something else ... */
+}
+
+asmlinkage void do_ov(struct pt_regs *regs)
+{
+	enum ctx_state prev_state;
+	siginfo_t info;
+
+	prev_state = exception_enter();
+	die_if_kernel("Integer overflow", regs);
+
+	info.si_code = FPE_INTOVF;
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_addr = (void __user *) regs->cp0_epc;
+	force_sig_info(SIGFPE, &info, current);
+	exception_exit(prev_state);
+}
+
+int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
+{
+	struct siginfo si = { 0 };
+
+	switch (sig) {
+	case 0:
+		return 0;
+
+	case SIGFPE:
+		si.si_addr = fault_addr;
+		si.si_signo = sig;
+		/*
+		 * Inexact can happen together with Overflow or Underflow.
+		 * Respect the mask to deliver the correct exception.
+		 */
+		fcr31 &= (fcr31 & FPU_CSR_ALL_E) <<
+			 (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E));
+		if (fcr31 & FPU_CSR_INV_X)
+			si.si_code = FPE_FLTINV;
+		else if (fcr31 & FPU_CSR_DIV_X)
+			si.si_code = FPE_FLTDIV;
+		else if (fcr31 & FPU_CSR_OVF_X)
+			si.si_code = FPE_FLTOVF;
+		else if (fcr31 & FPU_CSR_UDF_X)
+			si.si_code = FPE_FLTUND;
+		else if (fcr31 & FPU_CSR_INE_X)
+			si.si_code = FPE_FLTRES;
+		else
+			si.si_code = __SI_FAULT;
+		force_sig_info(sig, &si, current);
+		return 1;
+
+	case SIGBUS:
+		si.si_addr = fault_addr;
+		si.si_signo = sig;
+		si.si_code = BUS_ADRERR;
+		force_sig_info(sig, &si, current);
+		return 1;
+
+	case SIGSEGV:
+		si.si_addr = fault_addr;
+		si.si_signo = sig;
+		down_read(&current->mm->mmap_sem);
+		if (find_vma(current->mm, (unsigned long)fault_addr))
+			si.si_code = SEGV_ACCERR;
+		else
+			si.si_code = SEGV_MAPERR;
+		up_read(&current->mm->mmap_sem);
+		force_sig_info(sig, &si, current);
+		return 1;
+
+	default:
+		force_sig(sig, current);
+		return 1;
+	}
+}
+
+static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
+		       unsigned long old_epc, unsigned long old_ra)
+{
+	union mips_instruction inst = { .word = opcode };
+	void __user *fault_addr;
+	unsigned long fcr31;
+	int sig;
+
+	/* If it's obviously not an FP instruction, skip it */
+	switch (inst.i_format.opcode) {
+	case cop1_op:
+	case cop1x_op:
+	case lwc1_op:
+	case ldc1_op:
+	case swc1_op:
+	case sdc1_op:
+		break;
+
+	default:
+		return -1;
+	}
+
+	/*
+	 * do_ri skipped over the instruction via compute_return_epc, undo
+	 * that for the FPU emulator.
+	 */
+	regs->cp0_epc = old_epc;
+	regs->regs[31] = old_ra;
+
+	/* Save the FP context to struct thread_struct */
+	lose_fpu(1);
+
+	/* Run the emulator */
+	sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
+				       &fault_addr);
+	fcr31 = current->thread.fpu.fcr31;
+
+	/*
+	 * We can't allow the emulated instruction to leave any of
+	 * the cause bits set in $fcr31.
+	 */
+	current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+
+	/* Restore the hardware register state */
+	own_fpu(1);
+
+	/* Send a signal if required.  */
+	process_fpemu_return(sig, fault_addr, fcr31);
+
+	return 0;
+}
+
+/*
+ * XXX Delayed fp exceptions when doing a lazy ctx switch XXX
+ */
+asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
+{
+	enum ctx_state prev_state;
+	void __user *fault_addr;
+	int sig;
+
+	prev_state = exception_enter();
+	if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs),
+		       SIGFPE) == NOTIFY_STOP)
+		goto out;
+
+	/* Clear FCSR.Cause before enabling interrupts */
+	write_32bit_cp1_register(CP1_STATUS, fcr31 & ~FPU_CSR_ALL_X);
+	local_irq_enable();
+
+	die_if_kernel("FP exception in kernel code", regs);
+
+	if (fcr31 & FPU_CSR_UNI_X) {
+		/*
+		 * Unimplemented operation exception.  If we've got the full
+		 * software emulator on-board, let's use it...
+		 *
+		 * Force FPU to dump state into task/thread context.  We're
+		 * moving a lot of data here for what is probably a single
+		 * instruction, but the alternative is to pre-decode the FP
+		 * register operands before invoking the emulator, which seems
+		 * a bit extreme for what should be an infrequent event.
+		 */
+		/* Ensure 'resume' not overwrite saved fp context again. */
+		lose_fpu(1);
+
+		/* Run the emulator */
+		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
+					       &fault_addr);
+		fcr31 = current->thread.fpu.fcr31;
+
+		/*
+		 * We can't allow the emulated instruction to leave any of
+		 * the cause bits set in $fcr31.
+		 */
+		current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+
+		/* Restore the hardware register state */
+		own_fpu(1);	/* Using the FPU again.	 */
+	} else {
+		sig = SIGFPE;
+		fault_addr = (void __user *) regs->cp0_epc;
+	}
+
+	/* Send a signal if required.  */
+	process_fpemu_return(sig, fault_addr, fcr31);
+
+out:
+	exception_exit(prev_state);
+}
+
+void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
+	const char *str)
+{
+	siginfo_t info;
+	char b[40];
+
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+	if (kgdb_ll_trap(DIE_TRAP, str, regs, code, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
+		return;
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
+
+	if (notify_die(DIE_TRAP, str, regs, code, regs_to_trapnr(regs),
+		       SIGTRAP) == NOTIFY_STOP)
+		return;
+
+	/*
+	 * A short test says that IRIX 5.3 sends SIGTRAP for all trap
+	 * insns, even for trap and break codes that indicate arithmetic
+	 * failures.  Weird ...
+	 * But should we continue the brokenness???  --macro
+	 */
+	switch (code) {
+	case BRK_OVERFLOW:
+	case BRK_DIVZERO:
+		scnprintf(b, sizeof(b), "%s instruction in kernel code", str);
+		die_if_kernel(b, regs);
+		if (code == BRK_DIVZERO)
+			info.si_code = FPE_INTDIV;
+		else
+			info.si_code = FPE_INTOVF;
+		info.si_signo = SIGFPE;
+		info.si_errno = 0;
+		info.si_addr = (void __user *) regs->cp0_epc;
+		force_sig_info(SIGFPE, &info, current);
+		break;
+	case BRK_BUG:
+		die_if_kernel("Kernel bug detected", regs);
+		force_sig(SIGTRAP, current);
+		break;
+	case BRK_MEMU:
+		/*
+		 * This breakpoint code is used by the FPU emulator to retake
+		 * control of the CPU after executing the instruction from the
+		 * delay slot of an emulated branch.
+		 *
+		 * Terminate if exception was recognized as a delay slot return
+		 * otherwise handle as normal.
+		 */
+		if (do_dsemulret(regs))
+			return;
+
+		die_if_kernel("Math emu break/trap", regs);
+		force_sig(SIGTRAP, current);
+		break;
+	default:
+		scnprintf(b, sizeof(b), "%s instruction in kernel code", str);
+		die_if_kernel(b, regs);
+		force_sig(SIGTRAP, current);
+	}
+}
+
+asmlinkage void do_bp(struct pt_regs *regs)
+{
+	unsigned long epc = msk_isa16_mode(exception_epc(regs));
+	unsigned int opcode, bcode;
+	enum ctx_state prev_state;
+	mm_segment_t seg;
+
+	seg = get_fs();
+	if (!user_mode(regs))
+		set_fs(KERNEL_DS);
+
+	prev_state = exception_enter();
+	if (get_isa16_mode(regs->cp0_epc)) {
+		u16 instr[2];
+
+		if (__get_user(instr[0], (u16 __user *)epc))
+			goto out_sigsegv;
+
+		if (!cpu_has_mmips) {
+			/* MIPS16e mode */
+			bcode = (instr[0] >> 5) & 0x3f;
+		} else if (mm_insn_16bit(instr[0])) {
+			/* 16-bit microMIPS BREAK */
+			bcode = instr[0] & 0xf;
+		} else {
+			/* 32-bit microMIPS BREAK */
+			if (__get_user(instr[1], (u16 __user *)(epc + 2)))
+				goto out_sigsegv;
+			opcode = (instr[0] << 16) | instr[1];
+			bcode = (opcode >> 6) & ((1 << 20) - 1);
+		}
+	} else {
+		if (__get_user(opcode, (unsigned int __user *)epc))
+			goto out_sigsegv;
+		bcode = (opcode >> 6) & ((1 << 20) - 1);
+	}
+
+	/*
+	 * There is the ancient bug in the MIPS assemblers that the break
+	 * code starts left to bit 16 instead to bit 6 in the opcode.
+	 * Gas is bug-compatible, but not always, grrr...
+	 * We handle both cases with a simple heuristics.  --macro
+	 */
+	if (bcode >= (1 << 10))
+		bcode = ((bcode & ((1 << 10) - 1)) << 10) | (bcode >> 10);
+
+	/*
+	 * notify the kprobe handlers, if instruction is likely to
+	 * pertain to them.
+	 */
+	switch (bcode) {
+	case BRK_KPROBE_BP:
+		if (notify_die(DIE_BREAK, "debug", regs, bcode,
+			       regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
+			goto out;
+		else
+			break;
+	case BRK_KPROBE_SSTEPBP:
+		if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode,
+			       regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
+			goto out;
+		else
+			break;
+	default:
+		break;
+	}
+
+	do_trap_or_bp(regs, bcode, "Break");
+
+out:
+	set_fs(seg);
+	exception_exit(prev_state);
+	return;
+
+out_sigsegv:
+	force_sig(SIGSEGV, current);
+	goto out;
+}
+
+asmlinkage void do_tr(struct pt_regs *regs)
+{
+	u32 opcode, tcode = 0;
+	enum ctx_state prev_state;
+	u16 instr[2];
+	mm_segment_t seg;
+	unsigned long epc = msk_isa16_mode(exception_epc(regs));
+
+	seg = get_fs();
+	if (!user_mode(regs))
+		set_fs(get_ds());
+
+	prev_state = exception_enter();
+	if (get_isa16_mode(regs->cp0_epc)) {
+		if (__get_user(instr[0], (u16 __user *)(epc + 0)) ||
+		    __get_user(instr[1], (u16 __user *)(epc + 2)))
+			goto out_sigsegv;
+		opcode = (instr[0] << 16) | instr[1];
+		/* Immediate versions don't provide a code.  */
+		if (!(opcode & OPCODE))
+			tcode = (opcode >> 12) & ((1 << 4) - 1);
+	} else {
+		if (__get_user(opcode, (u32 __user *)epc))
+			goto out_sigsegv;
+		/* Immediate versions don't provide a code.  */
+		if (!(opcode & OPCODE))
+			tcode = (opcode >> 6) & ((1 << 10) - 1);
+	}
+
+	do_trap_or_bp(regs, tcode, "Trap");
+
+out:
+	set_fs(seg);
+	exception_exit(prev_state);
+	return;
+
+out_sigsegv:
+	force_sig(SIGSEGV, current);
+	goto out;
+}
+
+asmlinkage void do_ri(struct pt_regs *regs)
+{
+	unsigned int __user *epc = (unsigned int __user *)exception_epc(regs);
+	unsigned long old_epc = regs->cp0_epc;
+	unsigned long old31 = regs->regs[31];
+	enum ctx_state prev_state;
+	unsigned int opcode = 0;
+	int status = -1;
+
+	/*
+	 * Avoid any kernel code. Just emulate the R2 instruction
+	 * as quickly as possible.
+	 */
+	if (mipsr2_emulation && cpu_has_mips_r6 &&
+	    likely(user_mode(regs)) &&
+	    likely(get_user(opcode, epc) >= 0)) {
+		unsigned long fcr31 = 0;
+
+		status = mipsr2_decoder(regs, opcode, &fcr31);
+		switch (status) {
+		case 0:
+		case SIGEMT:
+			task_thread_info(current)->r2_emul_return = 1;
+			return;
+		case SIGILL:
+			goto no_r2_instr;
+		default:
+			process_fpemu_return(status,
+					     &current->thread.cp0_baduaddr,
+					     fcr31);
+			task_thread_info(current)->r2_emul_return = 1;
+			return;
+		}
+	}
+
+no_r2_instr:
+
+	prev_state = exception_enter();
+
+	if (notify_die(DIE_RI, "RI Fault", regs, 0, regs_to_trapnr(regs),
+		       SIGILL) == NOTIFY_STOP)
+		goto out;
+
+	die_if_kernel("Reserved instruction in kernel code", regs);
+
+	if (unlikely(compute_return_epc(regs) < 0))
+		goto out;
+
+	if (get_isa16_mode(regs->cp0_epc)) {
+		unsigned short mmop[2] = { 0 };
+
+		if (unlikely(get_user(mmop[0], epc) < 0))
+			status = SIGSEGV;
+		if (unlikely(get_user(mmop[1], epc) < 0))
+			status = SIGSEGV;
+		opcode = (mmop[0] << 16) | mmop[1];
+
+		if (status < 0)
+			status = simulate_rdhwr_mm(regs, opcode);
+	} else {
+		if (unlikely(get_user(opcode, epc) < 0))
+			status = SIGSEGV;
+
+		if (!cpu_has_llsc && status < 0)
+			status = simulate_llsc(regs, opcode);
+
+		if (status < 0)
+			status = simulate_rdhwr_normal(regs, opcode);
+
+		if (status < 0)
+			status = simulate_sync(regs, opcode);
+
+		if (status < 0)
+			status = simulate_fp(regs, opcode, old_epc, old31);
+	}
+
+	if (status < 0)
+		status = SIGILL;
+
+	if (unlikely(status > 0)) {
+		regs->cp0_epc = old_epc;		/* Undo skip-over.  */
+		regs->regs[31] = old31;
+		force_sig(status, current);
+	}
+
+out:
+	exception_exit(prev_state);
+}
+
+/*
+ * MIPS MT processors may have fewer FPU contexts than CPU threads. If we've
+ * emulated more than some threshold number of instructions, force migration to
+ * a "CPU" that has FP support.
+ */
+static void mt_ase_fp_affinity(void)
+{
+#ifdef CONFIG_MIPS_MT_FPAFF
+	if (mt_fpemul_threshold > 0 &&
+	     ((current->thread.emulated_fp++ > mt_fpemul_threshold))) {
+		/*
+		 * If there's no FPU present, or if the application has already
+		 * restricted the allowed set to exclude any CPUs with FPUs,
+		 * we'll skip the procedure.
+		 */
+		if (cpumask_intersects(&current->cpus_allowed, &mt_fpu_cpumask)) {
+			cpumask_t tmask;
+
+			current->thread.user_cpus_allowed
+				= current->cpus_allowed;
+			cpumask_and(&tmask, &current->cpus_allowed,
+				    &mt_fpu_cpumask);
+			set_cpus_allowed_ptr(current, &tmask);
+			set_thread_flag(TIF_FPUBOUND);
+		}
+	}
+#endif /* CONFIG_MIPS_MT_FPAFF */
+}
+
+/*
+ * No lock; only written during early bootup by CPU 0.
+ */
+static RAW_NOTIFIER_HEAD(cu2_chain);
+
+int __ref register_cu2_notifier(struct notifier_block *nb)
+{
+	return raw_notifier_chain_register(&cu2_chain, nb);
+}
+
+int cu2_notifier_call_chain(unsigned long val, void *v)
+{
+	return raw_notifier_call_chain(&cu2_chain, val, v);
+}
+
+static int default_cu2_call(struct notifier_block *nfb, unsigned long action,
+	void *data)
+{
+	struct pt_regs *regs = data;
+
+	die_if_kernel("COP2: Unhandled kernel unaligned access or invalid "
+			      "instruction", regs);
+	force_sig(SIGILL, current);
+
+	return NOTIFY_OK;
+}
+
+static int wait_on_fp_mode_switch(atomic_t *p)
+{
+	/*
+	 * The FP mode for this task is currently being switched. That may
+	 * involve modifications to the format of this tasks FP context which
+	 * make it unsafe to proceed with execution for the moment. Instead,
+	 * schedule some other task.
+	 */
+	schedule();
+	return 0;
+}
+
+static int enable_restore_fp_context(int msa)
+{
+	int err, was_fpu_owner, prior_msa;
+
+	/*
+	 * If an FP mode switch is currently underway, wait for it to
+	 * complete before proceeding.
+	 */
+	wait_on_atomic_t(&current->mm->context.fp_mode_switching,
+			 wait_on_fp_mode_switch, TASK_KILLABLE);
+
+	if (!used_math()) {
+		/* First time FP context user. */
+		preempt_disable();
+		err = init_fpu();
+		if (msa && !err) {
+			enable_msa();
+			_init_msa_upper();
+			set_thread_flag(TIF_USEDMSA);
+			set_thread_flag(TIF_MSA_CTX_LIVE);
+		}
+		preempt_enable();
+		if (!err)
+			set_used_math();
+		return err;
+	}
+
+	/*
+	 * This task has formerly used the FP context.
+	 *
+	 * If this thread has no live MSA vector context then we can simply
+	 * restore the scalar FP context. If it has live MSA vector context
+	 * (that is, it has or may have used MSA since last performing a
+	 * function call) then we'll need to restore the vector context. This
+	 * applies even if we're currently only executing a scalar FP
+	 * instruction. This is because if we were to later execute an MSA
+	 * instruction then we'd either have to:
+	 *
+	 *  - Restore the vector context & clobber any registers modified by
+	 *    scalar FP instructions between now & then.
+	 *
+	 * or
+	 *
+	 *  - Not restore the vector context & lose the most significant bits
+	 *    of all vector registers.
+	 *
+	 * Neither of those options is acceptable. We cannot restore the least
+	 * significant bits of the registers now & only restore the most
+	 * significant bits later because the most significant bits of any
+	 * vector registers whose aliased FP register is modified now will have
+	 * been zeroed. We'd have no way to know that when restoring the vector
+	 * context & thus may load an outdated value for the most significant
+	 * bits of a vector register.
+	 */
+	if (!msa && !thread_msa_context_live())
+		return own_fpu(1);
+
+	/*
+	 * This task is using or has previously used MSA. Thus we require
+	 * that Status.FR == 1.
+	 */
+	preempt_disable();
+	was_fpu_owner = is_fpu_owner();
+	err = own_fpu_inatomic(0);
+	if (err)
+		goto out;
+
+	enable_msa();
+	write_msa_csr(current->thread.fpu.msacsr);
+	set_thread_flag(TIF_USEDMSA);
+
+	/*
+	 * If this is the first time that the task is using MSA and it has
+	 * previously used scalar FP in this time slice then we already nave
+	 * FP context which we shouldn't clobber. We do however need to clear
+	 * the upper 64b of each vector register so that this task has no
+	 * opportunity to see data left behind by another.
+	 */
+	prior_msa = test_and_set_thread_flag(TIF_MSA_CTX_LIVE);
+	if (!prior_msa && was_fpu_owner) {
+		_init_msa_upper();
+
+		goto out;
+	}
+
+	if (!prior_msa) {
+		/*
+		 * Restore the least significant 64b of each vector register
+		 * from the existing scalar FP context.
+		 */
+		_restore_fp(current);
+
+		/*
+		 * The task has not formerly used MSA, so clear the upper 64b
+		 * of each vector register such that it cannot see data left
+		 * behind by another task.
+		 */
+		_init_msa_upper();
+	} else {
+		/* We need to restore the vector context. */
+		restore_msa(current);
+
+		/* Restore the scalar FP control & status register */
+		if (!was_fpu_owner)
+			write_32bit_cp1_register(CP1_STATUS,
+						 current->thread.fpu.fcr31);
+	}
+
+out:
+	preempt_enable();
+
+	return 0;
+}
+
+asmlinkage void do_cpu(struct pt_regs *regs)
+{
+	enum ctx_state prev_state;
+	unsigned int __user *epc;
+	unsigned long old_epc, old31;
+	void __user *fault_addr;
+	unsigned int opcode;
+	unsigned long fcr31;
+	unsigned int cpid;
+	int status, err;
+	unsigned long __maybe_unused flags;
+	int sig;
+
+	prev_state = exception_enter();
+	cpid = (regs->cp0_cause >> CAUSEB_CE) & 3;
+
+	if (cpid != 2)
+		die_if_kernel("do_cpu invoked from kernel context!", regs);
+
+	switch (cpid) {
+	case 0:
+		epc = (unsigned int __user *)exception_epc(regs);
+		old_epc = regs->cp0_epc;
+		old31 = regs->regs[31];
+		opcode = 0;
+		status = -1;
+
+		if (unlikely(compute_return_epc(regs) < 0))
+			break;
+
+		if (get_isa16_mode(regs->cp0_epc)) {
+			unsigned short mmop[2] = { 0 };
+
+			if (unlikely(get_user(mmop[0], epc) < 0))
+				status = SIGSEGV;
+			if (unlikely(get_user(mmop[1], epc) < 0))
+				status = SIGSEGV;
+			opcode = (mmop[0] << 16) | mmop[1];
+
+			if (status < 0)
+				status = simulate_rdhwr_mm(regs, opcode);
+		} else {
+			if (unlikely(get_user(opcode, epc) < 0))
+				status = SIGSEGV;
+
+			if (!cpu_has_llsc && status < 0)
+				status = simulate_llsc(regs, opcode);
+
+			if (status < 0)
+				status = simulate_rdhwr_normal(regs, opcode);
+		}
+
+		if (status < 0)
+			status = SIGILL;
+
+		if (unlikely(status > 0)) {
+			regs->cp0_epc = old_epc;	/* Undo skip-over.  */
+			regs->regs[31] = old31;
+			force_sig(status, current);
+		}
+
+		break;
+
+	case 3:
+		/*
+		 * The COP3 opcode space and consequently the CP0.Status.CU3
+		 * bit and the CP0.Cause.CE=3 encoding have been removed as
+		 * of the MIPS III ISA.  From the MIPS IV and MIPS32r2 ISAs
+		 * up the space has been reused for COP1X instructions, that
+		 * are enabled by the CP0.Status.CU1 bit and consequently
+		 * use the CP0.Cause.CE=1 encoding for Coprocessor Unusable
+		 * exceptions.  Some FPU-less processors that implement one
+		 * of these ISAs however use this code erroneously for COP1X
+		 * instructions.  Therefore we redirect this trap to the FP
+		 * emulator too.
+		 */
+		if (raw_cpu_has_fpu || !cpu_has_mips_4_5_64_r2_r6) {
+			force_sig(SIGILL, current);
+			break;
+		}
+		/* Fall through.  */
+
+	case 1:
+		err = enable_restore_fp_context(0);
+
+		if (raw_cpu_has_fpu && !err)
+			break;
+
+		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 0,
+					       &fault_addr);
+		fcr31 = current->thread.fpu.fcr31;
+
+		/*
+		 * We can't allow the emulated instruction to leave
+		 * any of the cause bits set in $fcr31.
+		 */
+		current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+
+		/* Send a signal if required.  */
+		if (!process_fpemu_return(sig, fault_addr, fcr31) && !err)
+			mt_ase_fp_affinity();
+
+		break;
+
+	case 2:
+		raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs);
+		break;
+	}
+
+	exception_exit(prev_state);
+}
+
+asmlinkage void do_msa_fpe(struct pt_regs *regs, unsigned int msacsr)
+{
+	enum ctx_state prev_state;
+
+	prev_state = exception_enter();
+	if (notify_die(DIE_MSAFP, "MSA FP exception", regs, 0,
+		       regs_to_trapnr(regs), SIGFPE) == NOTIFY_STOP)
+		goto out;
+
+	/* Clear MSACSR.Cause before enabling interrupts */
+	write_msa_csr(msacsr & ~MSA_CSR_CAUSEF);
+	local_irq_enable();
+
+	die_if_kernel("do_msa_fpe invoked from kernel context!", regs);
+	force_sig(SIGFPE, current);
+out:
+	exception_exit(prev_state);
+}
+
+asmlinkage void do_msa(struct pt_regs *regs)
+{
+	enum ctx_state prev_state;
+	int err;
+
+	prev_state = exception_enter();
+
+	if (!cpu_has_msa || test_thread_flag(TIF_32BIT_FPREGS)) {
+		force_sig(SIGILL, current);
+		goto out;
+	}
+
+	die_if_kernel("do_msa invoked from kernel context!", regs);
+
+	err = enable_restore_fp_context(1);
+	if (err)
+		force_sig(SIGILL, current);
+out:
+	exception_exit(prev_state);
+}
+
+asmlinkage void do_mdmx(struct pt_regs *regs)
+{
+	enum ctx_state prev_state;
+
+	prev_state = exception_enter();
+	force_sig(SIGILL, current);
+	exception_exit(prev_state);
+}
+
+/*
+ * Called with interrupts disabled.
+ */
+asmlinkage void do_watch(struct pt_regs *regs)
+{
+	enum ctx_state prev_state;
+	u32 cause;
+
+	prev_state = exception_enter();
+	/*
+	 * Clear WP (bit 22) bit of cause register so we don't loop
+	 * forever.
+	 */
+	cause = read_c0_cause();
+	cause &= ~(1 << 22);
+	write_c0_cause(cause);
+
+	/*
+	 * If the current thread has the watch registers loaded, save
+	 * their values and send SIGTRAP.  Otherwise another thread
+	 * left the registers set, clear them and continue.
+	 */
+	if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) {
+		mips_read_watch_registers();
+		local_irq_enable();
+		force_sig(SIGTRAP, current);
+	} else {
+		mips_clear_watch_registers();
+		local_irq_enable();
+	}
+	exception_exit(prev_state);
+}
+
+asmlinkage void do_mcheck(struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+	int multi_match = regs->cp0_status & ST0_TS;
+	enum ctx_state prev_state;
+
+	prev_state = exception_enter();
+	show_regs(regs);
+
+	if (multi_match) {
+		pr_err("Index	: %0x\n", read_c0_index());
+		pr_err("Pagemask: %0x\n", read_c0_pagemask());
+		pr_err("EntryHi : %0*lx\n", field, read_c0_entryhi());
+		pr_err("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
+		pr_err("EntryLo1: %0*lx\n", field, read_c0_entrylo1());
+		pr_err("Wired   : %0x\n", read_c0_wired());
+		pr_err("Pagegrain: %0x\n", read_c0_pagegrain());
+		if (cpu_has_htw) {
+			pr_err("PWField : %0*lx\n", field, read_c0_pwfield());
+			pr_err("PWSize  : %0*lx\n", field, read_c0_pwsize());
+			pr_err("PWCtl   : %0x\n", read_c0_pwctl());
+		}
+		pr_err("\n");
+		dump_tlb_all();
+	}
+
+	show_code((unsigned int __user *) regs->cp0_epc);
+
+	/*
+	 * Some chips may have other causes of machine check (e.g. SB1
+	 * graduation timer)
+	 */
+	panic("Caught Machine Check exception - %scaused by multiple "
+	      "matching entries in the TLB.",
+	      (multi_match) ? "" : "not ");
+}
+
+asmlinkage void do_mt(struct pt_regs *regs)
+{
+	int subcode;
+
+	subcode = (read_vpe_c0_vpecontrol() & VPECONTROL_EXCPT)
+			>> VPECONTROL_EXCPT_SHIFT;
+	switch (subcode) {
+	case 0:
+		printk(KERN_DEBUG "Thread Underflow\n");
+		break;
+	case 1:
+		printk(KERN_DEBUG "Thread Overflow\n");
+		break;
+	case 2:
+		printk(KERN_DEBUG "Invalid YIELD Qualifier\n");
+		break;
+	case 3:
+		printk(KERN_DEBUG "Gating Storage Exception\n");
+		break;
+	case 4:
+		printk(KERN_DEBUG "YIELD Scheduler Exception\n");
+		break;
+	case 5:
+		printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
+		break;
+	default:
+		printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",
+			subcode);
+		break;
+	}
+	die_if_kernel("MIPS MT Thread exception in kernel", regs);
+
+	force_sig(SIGILL, current);
+}
+
+
+asmlinkage void do_dsp(struct pt_regs *regs)
+{
+	if (cpu_has_dsp)
+		panic("Unexpected DSP exception");
+
+	force_sig(SIGILL, current);
+}
+
+asmlinkage void do_reserved(struct pt_regs *regs)
+{
+	/*
+	 * Game over - no way to handle this if it ever occurs.	 Most probably
+	 * caused by a new unknown cpu type or after another deadly
+	 * hard/software error.
+	 */
+	show_regs(regs);
+	panic("Caught reserved exception %ld - should not happen.",
+	      (regs->cp0_cause & 0x7f) >> 2);
+}
+
+static int __initdata l1parity = 1;
+static int __init nol1parity(char *s)
+{
+	l1parity = 0;
+	return 1;
+}
+__setup("nol1par", nol1parity);
+static int __initdata l2parity = 1;
+static int __init nol2parity(char *s)
+{
+	l2parity = 0;
+	return 1;
+}
+__setup("nol2par", nol2parity);
+
+/*
+ * Some MIPS CPUs can enable/disable for cache parity detection, but do
+ * it different ways.
+ */
+static inline void parity_protection_init(void)
+{
+	switch (current_cpu_type()) {
+	case CPU_24K:
+	case CPU_34K:
+	case CPU_74K:
+	case CPU_1004K:
+	case CPU_1074K:
+	case CPU_INTERAPTIV:
+	case CPU_PROAPTIV:
+	case CPU_P5600:
+	case CPU_QEMU_GENERIC:
+		{
+#define ERRCTL_PE	0x80000000
+#define ERRCTL_L2P	0x00800000
+			unsigned long errctl;
+			unsigned int l1parity_present, l2parity_present;
+
+			errctl = read_c0_ecc();
+			errctl &= ~(ERRCTL_PE|ERRCTL_L2P);
+
+			/* probe L1 parity support */
+			write_c0_ecc(errctl | ERRCTL_PE);
+			back_to_back_c0_hazard();
+			l1parity_present = (read_c0_ecc() & ERRCTL_PE);
+
+			/* probe L2 parity support */
+			write_c0_ecc(errctl|ERRCTL_L2P);
+			back_to_back_c0_hazard();
+			l2parity_present = (read_c0_ecc() & ERRCTL_L2P);
+
+			if (l1parity_present && l2parity_present) {
+				if (l1parity)
+					errctl |= ERRCTL_PE;
+				if (l1parity ^ l2parity)
+					errctl |= ERRCTL_L2P;
+			} else if (l1parity_present) {
+				if (l1parity)
+					errctl |= ERRCTL_PE;
+			} else if (l2parity_present) {
+				if (l2parity)
+					errctl |= ERRCTL_L2P;
+			} else {
+				/* No parity available */
+			}
+
+			printk(KERN_INFO "Writing ErrCtl register=%08lx\n", errctl);
+
+			write_c0_ecc(errctl);
+			back_to_back_c0_hazard();
+			errctl = read_c0_ecc();
+			printk(KERN_INFO "Readback ErrCtl register=%08lx\n", errctl);
+
+			if (l1parity_present)
+				printk(KERN_INFO "Cache parity protection %sabled\n",
+				       (errctl & ERRCTL_PE) ? "en" : "dis");
+
+			if (l2parity_present) {
+				if (l1parity_present && l1parity)
+					errctl ^= ERRCTL_L2P;
+				printk(KERN_INFO "L2 cache parity protection %sabled\n",
+				       (errctl & ERRCTL_L2P) ? "en" : "dis");
+			}
+		}
+		break;
+
+	case CPU_5KC:
+	case CPU_5KE:
+	case CPU_LOONGSON1:
+		write_c0_ecc(0x80000000);
+		back_to_back_c0_hazard();
+		/* Set the PE bit (bit 31) in the c0_errctl register. */
+		printk(KERN_INFO "Cache parity protection %sabled\n",
+		       (read_c0_ecc() & 0x80000000) ? "en" : "dis");
+		break;
+	case CPU_20KC:
+	case CPU_25KF:
+		/* Clear the DE bit (bit 16) in the c0_status register. */
+		printk(KERN_INFO "Enable cache parity protection for "
+		       "MIPS 20KC/25KF CPUs.\n");
+		clear_c0_status(ST0_DE);
+		break;
+	default:
+		break;
+	}
+}
+
+asmlinkage void cache_parity_error(void)
+{
+	const int field = 2 * sizeof(unsigned long);
+	unsigned int reg_val;
+
+	/* For the moment, report the problem and hang. */
+	printk("Cache error exception:\n");
+	printk("cp0_errorepc == %0*lx\n", field, read_c0_errorepc());
+	reg_val = read_c0_cacheerr();
+	printk("c0_cacheerr == %08x\n", reg_val);
+
+	printk("Decoded c0_cacheerr: %s cache fault in %s reference.\n",
+	       reg_val & (1<<30) ? "secondary" : "primary",
+	       reg_val & (1<<31) ? "data" : "insn");
+	if ((cpu_has_mips_r2_r6) &&
+	    ((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_MIPS)) {
+		pr_err("Error bits: %s%s%s%s%s%s%s%s\n",
+			reg_val & (1<<29) ? "ED " : "",
+			reg_val & (1<<28) ? "ET " : "",
+			reg_val & (1<<27) ? "ES " : "",
+			reg_val & (1<<26) ? "EE " : "",
+			reg_val & (1<<25) ? "EB " : "",
+			reg_val & (1<<24) ? "EI " : "",
+			reg_val & (1<<23) ? "E1 " : "",
+			reg_val & (1<<22) ? "E0 " : "");
+	} else {
+		pr_err("Error bits: %s%s%s%s%s%s%s\n",
+			reg_val & (1<<29) ? "ED " : "",
+			reg_val & (1<<28) ? "ET " : "",
+			reg_val & (1<<26) ? "EE " : "",
+			reg_val & (1<<25) ? "EB " : "",
+			reg_val & (1<<24) ? "EI " : "",
+			reg_val & (1<<23) ? "E1 " : "",
+			reg_val & (1<<22) ? "E0 " : "");
+	}
+	printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+	if (reg_val & (1<<22))
+		printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0());
+
+	if (reg_val & (1<<23))
+		printk("DErrAddr1: 0x%0*lx\n", field, read_c0_derraddr1());
+#endif
+
+	panic("Can't handle the cache error!");
+}
+
+asmlinkage void do_ftlb(void)
+{
+	const int field = 2 * sizeof(unsigned long);
+	unsigned int reg_val;
+
+	/* For the moment, report the problem and hang. */
+	if ((cpu_has_mips_r2_r6) &&
+	    ((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_MIPS)) {
+		pr_err("FTLB error exception, cp0_ecc=0x%08x:\n",
+		       read_c0_ecc());
+		pr_err("cp0_errorepc == %0*lx\n", field, read_c0_errorepc());
+		reg_val = read_c0_cacheerr();
+		pr_err("c0_cacheerr == %08x\n", reg_val);
+
+		if ((reg_val & 0xc0000000) == 0xc0000000) {
+			pr_err("Decoded c0_cacheerr: FTLB parity error\n");
+		} else {
+			pr_err("Decoded c0_cacheerr: %s cache fault in %s reference.\n",
+			       reg_val & (1<<30) ? "secondary" : "primary",
+			       reg_val & (1<<31) ? "data" : "insn");
+		}
+	} else {
+		pr_err("FTLB error exception\n");
+	}
+	/* Just print the cacheerr bits for now */
+	cache_parity_error();
+}
+
+/*
+ * SDBBP EJTAG debug exception handler.
+ * We skip the instruction and return to the next instruction.
+ */
+void ejtag_exception_handler(struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+	unsigned long depc, old_epc, old_ra;
+	unsigned int debug;
+
+	printk(KERN_DEBUG "SDBBP EJTAG debug exception - not handled yet, just ignored!\n");
+	depc = read_c0_depc();
+	debug = read_c0_debug();
+	printk(KERN_DEBUG "c0_depc = %0*lx, DEBUG = %08x\n", field, depc, debug);
+	if (debug & 0x80000000) {
+		/*
+		 * In branch delay slot.
+		 * We cheat a little bit here and use EPC to calculate the
+		 * debug return address (DEPC). EPC is restored after the
+		 * calculation.
+		 */
+		old_epc = regs->cp0_epc;
+		old_ra = regs->regs[31];
+		regs->cp0_epc = depc;
+		compute_return_epc(regs);
+		depc = regs->cp0_epc;
+		regs->cp0_epc = old_epc;
+		regs->regs[31] = old_ra;
+	} else
+		depc += 4;
+	write_c0_depc(depc);
+
+#if 0
+	printk(KERN_DEBUG "\n\n----- Enable EJTAG single stepping ----\n\n");
+	write_c0_debug(debug | 0x100);
+#endif
+}
+
+/*
+ * NMI exception handler.
+ * No lock; only written during early bootup by CPU 0.
+ */
+static RAW_NOTIFIER_HEAD(nmi_chain);
+
+int register_nmi_notifier(struct notifier_block *nb)
+{
+	return raw_notifier_chain_register(&nmi_chain, nb);
+}
+
+void __noreturn nmi_exception_handler(struct pt_regs *regs)
+{
+	char str[100];
+
+	raw_notifier_call_chain(&nmi_chain, 0, regs);
+	bust_spinlocks(1);
+	snprintf(str, 100, "CPU%d NMI taken, CP0_EPC=%lx\n",
+		 smp_processor_id(), regs->cp0_epc);
+	regs->cp0_epc = read_c0_errorepc();
+	die(str, regs);
+}
+
+#define VECTORSPACING 0x100	/* for EI/VI mode */
+
+unsigned long ebase;
+unsigned long exception_handlers[32];
+unsigned long vi_handlers[64];
+
+void __init *set_except_vector(int n, void *addr)
+{
+	unsigned long handler = (unsigned long) addr;
+	unsigned long old_handler;
+
+#ifdef CONFIG_CPU_MICROMIPS
+	/*
+	 * Only the TLB handlers are cache aligned with an even
+	 * address. All other handlers are on an odd address and
+	 * require no modification. Otherwise, MIPS32 mode will
+	 * be entered when handling any TLB exceptions. That
+	 * would be bad...since we must stay in microMIPS mode.
+	 */
+	if (!(handler & 0x1))
+		handler |= 1;
+#endif
+	old_handler = xchg(&exception_handlers[n], handler);
+
+	if (n == 0 && cpu_has_divec) {
+#ifdef CONFIG_CPU_MICROMIPS
+		unsigned long jump_mask = ~((1 << 27) - 1);
+#else
+		unsigned long jump_mask = ~((1 << 28) - 1);
+#endif
+		u32 *buf = (u32 *)(ebase + 0x200);
+		unsigned int k0 = 26;
+		if ((handler & jump_mask) == ((ebase + 0x200) & jump_mask)) {
+			uasm_i_j(&buf, handler & ~jump_mask);
+			uasm_i_nop(&buf);
+		} else {
+			UASM_i_LA(&buf, k0, handler);
+			uasm_i_jr(&buf, k0);
+			uasm_i_nop(&buf);
+		}
+		local_flush_icache_range(ebase + 0x200, (unsigned long)buf);
+	}
+	return (void *)old_handler;
+}
+
+static void do_default_vi(void)
+{
+	show_regs(get_irq_regs());
+	panic("Caught unexpected vectored interrupt.");
+}
+
+static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
+{
+	unsigned long handler;
+	unsigned long old_handler = vi_handlers[n];
+	int srssets = current_cpu_data.srsets;
+	u16 *h;
+	unsigned char *b;
+
+	BUG_ON(!cpu_has_veic && !cpu_has_vint);
+
+	if (addr == NULL) {
+		handler = (unsigned long) do_default_vi;
+		srs = 0;
+	} else
+		handler = (unsigned long) addr;
+	vi_handlers[n] = handler;
+
+	b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
+
+	if (srs >= srssets)
+		panic("Shadow register set %d not supported", srs);
+
+	if (cpu_has_veic) {
+		if (board_bind_eic_interrupt)
+			board_bind_eic_interrupt(n, srs);
+	} else if (cpu_has_vint) {
+		/* SRSMap is only defined if shadow sets are implemented */
+		if (srssets > 1)
+			change_c0_srsmap(0xf << n*4, srs << n*4);
+	}
+
+	if (srs == 0) {
+		/*
+		 * If no shadow set is selected then use the default handler
+		 * that does normal register saving and standard interrupt exit
+		 */
+		extern char except_vec_vi, except_vec_vi_lui;
+		extern char except_vec_vi_ori, except_vec_vi_end;
+		extern char rollback_except_vec_vi;
+		char *vec_start = using_rollback_handler() ?
+			&rollback_except_vec_vi : &except_vec_vi;
+#if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN)
+		const int lui_offset = &except_vec_vi_lui - vec_start + 2;
+		const int ori_offset = &except_vec_vi_ori - vec_start + 2;
+#else
+		const int lui_offset = &except_vec_vi_lui - vec_start;
+		const int ori_offset = &except_vec_vi_ori - vec_start;
+#endif
+		const int handler_len = &except_vec_vi_end - vec_start;
+
+		if (handler_len > VECTORSPACING) {
+			/*
+			 * Sigh... panicing won't help as the console
+			 * is probably not configured :(
+			 */
+			panic("VECTORSPACING too small");
+		}
+
+		set_handler(((unsigned long)b - ebase), vec_start,
+#ifdef CONFIG_CPU_MICROMIPS
+				(handler_len - 1));
+#else
+				handler_len);
+#endif
+		h = (u16 *)(b + lui_offset);
+		*h = (handler >> 16) & 0xffff;
+		h = (u16 *)(b + ori_offset);
+		*h = (handler & 0xffff);
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+handler_len));
+	}
+	else {
+		/*
+		 * In other cases jump directly to the interrupt handler. It
+		 * is the handler's responsibility to save registers if required
+		 * (eg hi/lo) and return from the exception using "eret".
+		 */
+		u32 insn;
+
+		h = (u16 *)b;
+		/* j handler */
+#ifdef CONFIG_CPU_MICROMIPS
+		insn = 0xd4000000 | (((u32)handler & 0x07ffffff) >> 1);
+#else
+		insn = 0x08000000 | (((u32)handler & 0x0fffffff) >> 2);
+#endif
+		h[0] = (insn >> 16) & 0xffff;
+		h[1] = insn & 0xffff;
+		h[2] = 0;
+		h[3] = 0;
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+8));
+	}
+
+	return (void *)old_handler;
+}
+
+void *set_vi_handler(int n, vi_handler_t addr)
+{
+	return set_vi_srs_handler(n, addr, 0);
+}
+
+extern void tlb_init(void);
+
+/*
+ * Timer interrupt
+ */
+int cp0_compare_irq;
+EXPORT_SYMBOL_GPL(cp0_compare_irq);
+int cp0_compare_irq_shift;
+
+/*
+ * Performance counter IRQ or -1 if shared with timer
+ */
+int cp0_perfcount_irq;
+EXPORT_SYMBOL_GPL(cp0_perfcount_irq);
+
+/*
+ * Fast debug channel IRQ or -1 if not present
+ */
+int cp0_fdc_irq;
+EXPORT_SYMBOL_GPL(cp0_fdc_irq);
+
+static int noulri;
+
+static int __init ulri_disable(char *s)
+{
+	pr_info("Disabling ulri\n");
+	noulri = 1;
+
+	return 1;
+}
+__setup("noulri", ulri_disable);
+
+/* configure STATUS register */
+static void configure_status(void)
+{
+	/*
+	 * Disable coprocessors and select 32-bit or 64-bit addressing
+	 * and the 16/32 or 32/32 FPR register model.  Reset the BEV
+	 * flag that some firmware may have left set and the TS bit (for
+	 * IP27).  Set XX for ISA IV code to work.
+	 */
+	unsigned int status_set = ST0_CU0;
+#ifdef CONFIG_64BIT
+	status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
+#endif
+	if (current_cpu_data.isa_level & MIPS_CPU_ISA_IV)
+		status_set |= ST0_XX;
+	if (cpu_has_dsp)
+		status_set |= ST0_MX;
+
+	change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
+			 status_set);
+}
+
+/* configure HWRENA register */
+static void configure_hwrena(void)
+{
+	unsigned int hwrena = cpu_hwrena_impl_bits;
+
+	if (cpu_has_mips_r2_r6)
+		hwrena |= 0x0000000f;
+
+	if (!noulri && cpu_has_userlocal)
+		hwrena |= (1 << 29);
+
+	if (hwrena)
+		write_c0_hwrena(hwrena);
+}
+
+static void configure_exception_vector(void)
+{
+	if (cpu_has_veic || cpu_has_vint) {
+		unsigned long sr = set_c0_status(ST0_BEV);
+		write_c0_ebase(ebase);
+		write_c0_status(sr);
+		/* Setting vector spacing enables EI/VI mode  */
+		change_c0_intctl(0x3e0, VECTORSPACING);
+	}
+	if (cpu_has_divec) {
+		if (cpu_has_mipsmt) {
+			unsigned int vpflags = dvpe();
+			set_c0_cause(CAUSEF_IV);
+			evpe(vpflags);
+		} else
+			set_c0_cause(CAUSEF_IV);
+	}
+}
+
+void per_cpu_trap_init(bool is_boot_cpu)
+{
+	unsigned int cpu = smp_processor_id();
+
+	configure_status();
+	configure_hwrena();
+
+	configure_exception_vector();
+
+	/*
+	 * Before R2 both interrupt numbers were fixed to 7, so on R2 only:
+	 *
+	 *  o read IntCtl.IPTI to determine the timer interrupt
+	 *  o read IntCtl.IPPCI to determine the performance counter interrupt
+	 *  o read IntCtl.IPFDC to determine the fast debug channel interrupt
+	 */
+	if (cpu_has_mips_r2_r6) {
+		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
+		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
+		cp0_fdc_irq = (read_c0_intctl() >> INTCTLB_IPFDC) & 7;
+		if (!cp0_fdc_irq)
+			cp0_fdc_irq = -1;
+
+	} else {
+		cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
+		cp0_compare_irq_shift = CP0_LEGACY_PERFCNT_IRQ;
+		cp0_perfcount_irq = -1;
+		cp0_fdc_irq = -1;
+	}
+
+	if (!cpu_data[cpu].asid_cache)
+		cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
+
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+	BUG_ON(current->mm);
+	enter_lazy_tlb(&init_mm, current);
+
+		/* Boot CPU's cache setup in setup_arch(). */
+		if (!is_boot_cpu)
+			cpu_cache_init();
+		tlb_init();
+	TLBMISS_HANDLER_SETUP();
+}
+
+/* Install CPU exception handler */
+void set_handler(unsigned long offset, void *addr, unsigned long size)
+{
+#ifdef CONFIG_CPU_MICROMIPS
+	memcpy((void *)(ebase + offset), ((unsigned char *)addr - 1), size);
+#else
+	memcpy((void *)(ebase + offset), addr, size);
+#endif
+	local_flush_icache_range(ebase + offset, ebase + offset + size);
+}
+
+static char panic_null_cerr[] =
+	"Trying to set NULL cache error exception handler";
+
+/*
+ * Install uncached CPU exception handler.
+ * This is suitable only for the cache error exception which is the only
+ * exception handler that is being run uncached.
+ */
+void set_uncached_handler(unsigned long offset, void *addr,
+	unsigned long size)
+{
+	unsigned long uncached_ebase = CKSEG1ADDR(ebase);
+
+	if (!addr)
+		panic(panic_null_cerr);
+
+	memcpy((void *)(uncached_ebase + offset), addr, size);
+}
+
+static int __initdata rdhwr_noopt;
+static int __init set_rdhwr_noopt(char *str)
+{
+	rdhwr_noopt = 1;
+	return 1;
+}
+
+__setup("rdhwr_noopt", set_rdhwr_noopt);
+
+void __init trap_init(void)
+{
+	extern char except_vec3_generic;
+	extern char except_vec4;
+	extern char except_vec3_r4000;
+	unsigned long i;
+
+	check_wait();
+
+#if defined(CONFIG_KGDB)
+	if (kgdb_early_setup)
+		return; /* Already done */
+#endif
+
+	if (cpu_has_veic || cpu_has_vint) {
+		unsigned long size = 0x200 + VECTORSPACING*64;
+		ebase = (unsigned long)
+			__alloc_bootmem(size, 1 << fls(size), 0);
+	} else {
+#ifdef CONFIG_KVM_GUEST
+#define KVM_GUEST_KSEG0     0x40000000
+        ebase = KVM_GUEST_KSEG0;
+#else
+        ebase = CKSEG0;
+#endif
+		if (cpu_has_mips_r2_r6)
+			ebase += (read_c0_ebase() & 0x3ffff000);
+	}
+
+	if (cpu_has_mmips) {
+		unsigned int config3 = read_c0_config3();
+
+		if (IS_ENABLED(CONFIG_CPU_MICROMIPS))
+			write_c0_config3(config3 | MIPS_CONF3_ISA_OE);
+		else
+			write_c0_config3(config3 & ~MIPS_CONF3_ISA_OE);
+	}
+
+	if (board_ebase_setup)
+		board_ebase_setup();
+	per_cpu_trap_init(true);
+
+	/*
+	 * Copy the generic exception handlers to their final destination.
+	 * This will be overriden later as suitable for a particular
+	 * configuration.
+	 */
+	set_handler(0x180, &except_vec3_generic, 0x80);
+
+	/*
+	 * Setup default vectors
+	 */
+	for (i = 0; i <= 31; i++)
+		set_except_vector(i, handle_reserved);
+
+	/*
+	 * Copy the EJTAG debug exception vector handler code to it's final
+	 * destination.
+	 */
+	if (cpu_has_ejtag && board_ejtag_handler_setup)
+		board_ejtag_handler_setup();
+
+	/*
+	 * Only some CPUs have the watch exceptions.
+	 */
+	if (cpu_has_watch)
+		set_except_vector(23, handle_watch);
+
+	/*
+	 * Initialise interrupt handlers
+	 */
+	if (cpu_has_veic || cpu_has_vint) {
+		int nvec = cpu_has_veic ? 64 : 8;
+		for (i = 0; i < nvec; i++)
+			set_vi_handler(i, NULL);
+	}
+	else if (cpu_has_divec)
+		set_handler(0x200, &except_vec4, 0x8);
+
+	/*
+	 * Some CPUs can enable/disable for cache parity detection, but does
+	 * it different ways.
+	 */
+	parity_protection_init();
+
+	/*
+	 * The Data Bus Errors / Instruction Bus Errors are signaled
+	 * by external hardware.  Therefore these two exceptions
+	 * may have board specific handlers.
+	 */
+	if (board_be_init)
+		board_be_init();
+
+	set_except_vector(0, using_rollback_handler() ? rollback_handle_int
+						      : handle_int);
+	set_except_vector(1, handle_tlbm);
+	set_except_vector(2, handle_tlbl);
+	set_except_vector(3, handle_tlbs);
+
+	set_except_vector(4, handle_adel);
+	set_except_vector(5, handle_ades);
+
+	set_except_vector(6, handle_ibe);
+	set_except_vector(7, handle_dbe);
+
+	set_except_vector(8, handle_sys);
+	set_except_vector(9, handle_bp);
+	set_except_vector(10, rdhwr_noopt ? handle_ri :
+			  (cpu_has_vtag_icache ?
+			   handle_ri_rdhwr_vivt : handle_ri_rdhwr));
+	set_except_vector(11, handle_cpu);
+	set_except_vector(12, handle_ov);
+	set_except_vector(13, handle_tr);
+	set_except_vector(14, handle_msa_fpe);
+
+	if (current_cpu_type() == CPU_R6000 ||
+	    current_cpu_type() == CPU_R6000A) {
+		/*
+		 * The R6000 is the only R-series CPU that features a machine
+		 * check exception (similar to the R4000 cache error) and
+		 * unaligned ldc1/sdc1 exception.  The handlers have not been
+		 * written yet.	 Well, anyway there is no R6000 machine on the
+		 * current list of targets for Linux/MIPS.
+		 * (Duh, crap, there is someone with a triple R6k machine)
+		 */
+		//set_except_vector(14, handle_mc);
+		//set_except_vector(15, handle_ndc);
+	}
+
+
+	if (board_nmi_handler_setup)
+		board_nmi_handler_setup();
+
+	if (cpu_has_fpu && !cpu_has_nofpuex)
+		set_except_vector(15, handle_fpe);
+
+	set_except_vector(16, handle_ftlb);
+
+	if (cpu_has_rixiex) {
+		set_except_vector(19, tlb_do_page_fault_0);
+		set_except_vector(20, tlb_do_page_fault_0);
+	}
+
+	set_except_vector(21, handle_msa);
+	set_except_vector(22, handle_mdmx);
+
+	if (cpu_has_mcheck)
+		set_except_vector(24, handle_mcheck);
+
+	if (cpu_has_mipsmt)
+		set_except_vector(25, handle_mt);
+
+	set_except_vector(26, handle_dsp);
+
+	if (board_cache_error_setup)
+		board_cache_error_setup();
+
+	if (cpu_has_vce)
+		/* Special exception: R4[04]00 uses also the divec space. */
+		set_handler(0x180, &except_vec3_r4000, 0x100);
+	else if (cpu_has_4kex)
+		set_handler(0x180, &except_vec3_generic, 0x80);
+	else
+		set_handler(0x080, &except_vec3_generic, 0x80);
+
+	local_flush_icache_range(ebase, ebase + 0x400);
+
+	sort_extable(__start___dbe_table, __stop___dbe_table);
+
+	cu2_notifier(default_cu2_call, 0x80000000);	/* Run last  */
+}
+
+static int trap_pm_notifier(struct notifier_block *self, unsigned long cmd,
+			    void *v)
+{
+	switch (cmd) {
+	case CPU_PM_ENTER_FAILED:
+	case CPU_PM_EXIT:
+		configure_status();
+		configure_hwrena();
+		configure_exception_vector();
+
+		/* Restore register with CPU number for TLB handlers */
+		TLBMISS_HANDLER_RESTORE();
+
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block trap_pm_notifier_block = {
+	.notifier_call = trap_pm_notifier,
+};
+
+static int __init trap_pm_init(void)
+{
+	return cpu_pm_register_notifier(&trap_pm_notifier_block);
+}
+arch_initcall(trap_pm_init);
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
new file mode 100644
index 000000000..af84bef0c
--- /dev/null
+++ b/arch/mips/kernel/unaligned.c
@@ -0,0 +1,2244 @@
+/*
+ * Handle unaligned accesses by emulation.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1998, 1999, 2002 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2014 Imagination Technologies Ltd.
+ *
+ * This file contains exception handler for address error exception with the
+ * special capability to execute faulting instructions in software.  The
+ * handler does not try to handle the case when the program counter points
+ * to an address not aligned to a word boundary.
+ *
+ * Putting data to unaligned addresses is a bad practice even on Intel where
+ * only the performance is affected.  Much worse is that such code is non-
+ * portable.  Due to several programs that die on MIPS due to alignment
+ * problems I decided to implement this handler anyway though I originally
+ * didn't intend to do this at all for user code.
+ *
+ * For now I enable fixing of address errors by default to make life easier.
+ * I however intend to disable this somewhen in the future when the alignment
+ * problems with user programs have been fixed.	 For programmers this is the
+ * right way to go.
+ *
+ * Fixing address errors is a per process option.  The option is inherited
+ * across fork(2) and execve(2) calls.	If you really want to use the
+ * option in your user programs - I discourage the use of the software
+ * emulation strongly - use the following code in your userland stuff:
+ *
+ * #include <sys/sysmips.h>
+ *
+ * ...
+ * sysmips(MIPS_FIXADE, x);
+ * ...
+ *
+ * The argument x is 0 for disabling software emulation, enabled otherwise.
+ *
+ * Below a little program to play around with this feature.
+ *
+ * #include <stdio.h>
+ * #include <sys/sysmips.h>
+ *
+ * struct foo {
+ *	   unsigned char bar[8];
+ * };
+ *
+ * main(int argc, char *argv[])
+ * {
+ *	   struct foo x = {0, 1, 2, 3, 4, 5, 6, 7};
+ *	   unsigned int *p = (unsigned int *) (x.bar + 3);
+ *	   int i;
+ *
+ *	   if (argc > 1)
+ *		   sysmips(MIPS_FIXADE, atoi(argv[1]));
+ *
+ *	   printf("*p = %08lx\n", *p);
+ *
+ *	   *p = 0xdeadface;
+ *
+ *	   for(i = 0; i <= 7; i++)
+ *	   printf("%02x ", x.bar[i]);
+ *	   printf("\n");
+ * }
+ *
+ * Coprocessor loads are not supported; I think this case is unimportant
+ * in the practice.
+ *
+ * TODO: Handle ndc (attempted store to doubleword in uncached memory)
+ *	 exception for the R6000.
+ *	 A store crossing a page boundary might be executed only partially.
+ *	 Undo the partial store in this case.
+ */
+#include <linux/context_tracking.h>
+#include <linux/mm.h>
+#include <linux/signal.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/debugfs.h>
+#include <linux/perf_event.h>
+
+#include <asm/asm.h>
+#include <asm/branch.h>
+#include <asm/byteorder.h>
+#include <asm/cop2.h>
+#include <asm/fpu.h>
+#include <asm/fpu_emulator.h>
+#include <asm/inst.h>
+#include <asm/uaccess.h>
+
+#define STR(x)	__STR(x)
+#define __STR(x)  #x
+
+enum {
+	UNALIGNED_ACTION_QUIET,
+	UNALIGNED_ACTION_SIGNAL,
+	UNALIGNED_ACTION_SHOW,
+};
+#ifdef CONFIG_DEBUG_FS
+static u32 unaligned_instructions;
+static u32 unaligned_action;
+#else
+#define unaligned_action UNALIGNED_ACTION_QUIET
+#endif
+extern void show_registers(struct pt_regs *regs);
+
+#ifdef __BIG_ENDIAN
+#define     _LoadHW(addr, value, res, type)  \
+do {                                                        \
+		__asm__ __volatile__ (".set\tnoat\n"        \
+			"1:\t"type##_lb("%0", "0(%2)")"\n"  \
+			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
+			"sll\t%0, 0x8\n\t"                  \
+			"or\t%0, $1\n\t"                    \
+			"li\t%1, 0\n"                       \
+			"3:\t.set\tat\n\t"                  \
+			".insn\n\t"                         \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%1, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=&r" (value), "=r" (res)         \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _LoadW(addr, value, res, type)   \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			"1:\t"type##_lwl("%0", "(%2)")"\n"   \
+			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
+			"li\t%1, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%1, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=&r" (value), "=r" (res)         \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#else
+/* MIPSR6 has no lwl instruction */
+#define     _LoadW(addr, value, res, type) \
+do {                                                        \
+		__asm__ __volatile__ (			    \
+			".set\tpush\n"			    \
+			".set\tnoat\n\t"		    \
+			"1:"type##_lb("%0", "0(%2)")"\n\t"  \
+			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"li\t%1, 0\n"			    \
+			".set\tpop\n"			    \
+			"10:\n\t"			    \
+			".insn\n\t"			    \
+			".section\t.fixup,\"ax\"\n\t"	    \
+			"11:\tli\t%1, %3\n\t"		    \
+			"j\t10b\n\t"			    \
+			".previous\n\t"			    \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 11b\n\t"		    \
+			STR(PTR)"\t2b, 11b\n\t"		    \
+			STR(PTR)"\t3b, 11b\n\t"		    \
+			STR(PTR)"\t4b, 11b\n\t"		    \
+			".previous"			    \
+			: "=&r" (value), "=r" (res)	    \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#endif /* CONFIG_CPU_MIPSR6 */
+
+#define     _LoadHWU(addr, value, res, type) \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			".set\tnoat\n"                      \
+			"1:\t"type##_lbu("%0", "0(%2)")"\n" \
+			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
+			"sll\t%0, 0x8\n\t"                  \
+			"or\t%0, $1\n\t"                    \
+			"li\t%1, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			".set\tat\n\t"                      \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%1, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=&r" (value), "=r" (res)         \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _LoadWU(addr, value, res, type)  \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			"1:\t"type##_lwl("%0", "(%2)")"\n"  \
+			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
+			"dsll\t%0, %0, 32\n\t"              \
+			"dsrl\t%0, %0, 32\n\t"              \
+			"li\t%1, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			"\t.section\t.fixup,\"ax\"\n\t"     \
+			"4:\tli\t%1, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=&r" (value), "=r" (res)         \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#define     _LoadDW(addr, value, res)  \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			"1:\tldl\t%0, (%2)\n"               \
+			"2:\tldr\t%0, 7(%2)\n\t"            \
+			"li\t%1, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			"\t.section\t.fixup,\"ax\"\n\t"     \
+			"4:\tli\t%1, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=&r" (value), "=r" (res)         \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#else
+/* MIPSR6 has not lwl and ldl instructions */
+#define	    _LoadWU(addr, value, res, type) \
+do {                                                        \
+		__asm__ __volatile__ (			    \
+			".set\tpush\n\t"		    \
+			".set\tnoat\n\t"		    \
+			"1:"type##_lbu("%0", "0(%2)")"\n\t" \
+			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"li\t%1, 0\n"			    \
+			".set\tpop\n"			    \
+			"10:\n\t"			    \
+			".insn\n\t"			    \
+			".section\t.fixup,\"ax\"\n\t"	    \
+			"11:\tli\t%1, %3\n\t"		    \
+			"j\t10b\n\t"			    \
+			".previous\n\t"			    \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 11b\n\t"		    \
+			STR(PTR)"\t2b, 11b\n\t"		    \
+			STR(PTR)"\t3b, 11b\n\t"		    \
+			STR(PTR)"\t4b, 11b\n\t"		    \
+			".previous"			    \
+			: "=&r" (value), "=r" (res)	    \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#define     _LoadDW(addr, value, res)  \
+do {                                                        \
+		__asm__ __volatile__ (			    \
+			".set\tpush\n\t"		    \
+			".set\tnoat\n\t"		    \
+			"1:lb\t%0, 0(%2)\n\t"    	    \
+			"2:lbu\t $1, 1(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"3:lbu\t$1, 2(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"4:lbu\t$1, 3(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"5:lbu\t$1, 4(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"6:lbu\t$1, 5(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"7:lbu\t$1, 6(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"8:lbu\t$1, 7(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"li\t%1, 0\n"			    \
+			".set\tpop\n\t"			    \
+			"10:\n\t"			    \
+			".insn\n\t"			    \
+			".section\t.fixup,\"ax\"\n\t"	    \
+			"11:\tli\t%1, %3\n\t"		    \
+			"j\t10b\n\t"			    \
+			".previous\n\t"			    \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 11b\n\t"		    \
+			STR(PTR)"\t2b, 11b\n\t"		    \
+			STR(PTR)"\t3b, 11b\n\t"		    \
+			STR(PTR)"\t4b, 11b\n\t"		    \
+			STR(PTR)"\t5b, 11b\n\t"		    \
+			STR(PTR)"\t6b, 11b\n\t"		    \
+			STR(PTR)"\t7b, 11b\n\t"		    \
+			STR(PTR)"\t8b, 11b\n\t"		    \
+			".previous"			    \
+			: "=&r" (value), "=r" (res)	    \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#endif /* CONFIG_CPU_MIPSR6 */
+
+
+#define     _StoreHW(addr, value, res, type) \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			".set\tnoat\n"                      \
+			"1:\t"type##_sb("%1", "1(%2)")"\n"  \
+			"srl\t$1, %1, 0x8\n"                \
+			"2:\t"type##_sb("$1", "0(%2)")"\n"  \
+			".set\tat\n\t"                      \
+			"li\t%0, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%0, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=r" (res)                        \
+			: "r" (value), "r" (addr), "i" (-EFAULT));\
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _StoreW(addr, value, res, type)  \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			"1:\t"type##_swl("%1", "(%2)")"\n"  \
+			"2:\t"type##_swr("%1", "3(%2)")"\n\t"\
+			"li\t%0, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%0, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+		: "=r" (res)                                \
+		: "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while(0)
+
+#define     _StoreDW(addr, value, res) \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			"1:\tsdl\t%1,(%2)\n"                \
+			"2:\tsdr\t%1, 7(%2)\n\t"            \
+			"li\t%0, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%0, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+		: "=r" (res)                                \
+		: "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while(0)
+
+#else
+/* MIPSR6 has no swl and sdl instructions */
+#define     _StoreW(addr, value, res, type)  \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			".set\tpush\n\t"		    \
+			".set\tnoat\n\t"		    \
+			"1:"type##_sb("%1", "3(%2)")"\n\t"  \
+			"srl\t$1, %1, 0x8\n\t"		    \
+			"2:"type##_sb("$1", "2(%2)")"\n\t"  \
+			"srl\t$1, $1,  0x8\n\t"		    \
+			"3:"type##_sb("$1", "1(%2)")"\n\t"  \
+			"srl\t$1, $1, 0x8\n\t"		    \
+			"4:"type##_sb("$1", "0(%2)")"\n\t"  \
+			".set\tpop\n\t"			    \
+			"li\t%0, 0\n"			    \
+			"10:\n\t"			    \
+			".insn\n\t"			    \
+			".section\t.fixup,\"ax\"\n\t"	    \
+			"11:\tli\t%0, %3\n\t"		    \
+			"j\t10b\n\t"			    \
+			".previous\n\t"			    \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 11b\n\t"		    \
+			STR(PTR)"\t2b, 11b\n\t"		    \
+			STR(PTR)"\t3b, 11b\n\t"		    \
+			STR(PTR)"\t4b, 11b\n\t"		    \
+			".previous"			    \
+		: "=&r" (res)			    	    \
+		: "r" (value), "r" (addr), "i" (-EFAULT)    \
+		: "memory");                                \
+} while(0)
+
+#define     StoreDW(addr, value, res) \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			".set\tpush\n\t"		    \
+			".set\tnoat\n\t"		    \
+			"1:sb\t%1, 7(%2)\n\t"    	    \
+			"dsrl\t$1, %1, 0x8\n\t"		    \
+			"2:sb\t$1, 6(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"3:sb\t$1, 5(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"4:sb\t$1, 4(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"5:sb\t$1, 3(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"6:sb\t$1, 2(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"7:sb\t$1, 1(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"8:sb\t$1, 0(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			".set\tpop\n\t"			    \
+			"li\t%0, 0\n"			    \
+			"10:\n\t"			    \
+			".insn\n\t"			    \
+			".section\t.fixup,\"ax\"\n\t"	    \
+			"11:\tli\t%0, %3\n\t"		    \
+			"j\t10b\n\t"			    \
+			".previous\n\t"			    \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 11b\n\t"		    \
+			STR(PTR)"\t2b, 11b\n\t"		    \
+			STR(PTR)"\t3b, 11b\n\t"		    \
+			STR(PTR)"\t4b, 11b\n\t"		    \
+			STR(PTR)"\t5b, 11b\n\t"		    \
+			STR(PTR)"\t6b, 11b\n\t"		    \
+			STR(PTR)"\t7b, 11b\n\t"		    \
+			STR(PTR)"\t8b, 11b\n\t"		    \
+			".previous"			    \
+		: "=&r" (res)			    	    \
+		: "r" (value), "r" (addr), "i" (-EFAULT)    \
+		: "memory");                                \
+} while(0)
+
+#endif /* CONFIG_CPU_MIPSR6 */
+
+#else /* __BIG_ENDIAN */
+
+#define     _LoadHW(addr, value, res, type)  \
+do {                                                        \
+		__asm__ __volatile__ (".set\tnoat\n"        \
+			"1:\t"type##_lb("%0", "1(%2)")"\n"  \
+			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
+			"sll\t%0, 0x8\n\t"                  \
+			"or\t%0, $1\n\t"                    \
+			"li\t%1, 0\n"                       \
+			"3:\t.set\tat\n\t"                  \
+			".insn\n\t"                         \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%1, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=&r" (value), "=r" (res)         \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _LoadW(addr, value, res, type)   \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
+			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
+			"li\t%1, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%1, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=&r" (value), "=r" (res)         \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#else
+/* MIPSR6 has no lwl instruction */
+#define     _LoadW(addr, value, res, type) \
+do {                                                        \
+		__asm__ __volatile__ (			    \
+			".set\tpush\n"			    \
+			".set\tnoat\n\t"		    \
+			"1:"type##_lb("%0", "3(%2)")"\n\t"  \
+			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"li\t%1, 0\n"			    \
+			".set\tpop\n"			    \
+			"10:\n\t"			    \
+			".insn\n\t"			    \
+			".section\t.fixup,\"ax\"\n\t"	    \
+			"11:\tli\t%1, %3\n\t"		    \
+			"j\t10b\n\t"			    \
+			".previous\n\t"			    \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 11b\n\t"		    \
+			STR(PTR)"\t2b, 11b\n\t"		    \
+			STR(PTR)"\t3b, 11b\n\t"		    \
+			STR(PTR)"\t4b, 11b\n\t"		    \
+			".previous"			    \
+			: "=&r" (value), "=r" (res)	    \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#endif /* CONFIG_CPU_MIPSR6 */
+
+
+#define     _LoadHWU(addr, value, res, type) \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			".set\tnoat\n"                      \
+			"1:\t"type##_lbu("%0", "1(%2)")"\n" \
+			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
+			"sll\t%0, 0x8\n\t"                  \
+			"or\t%0, $1\n\t"                    \
+			"li\t%1, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			".set\tat\n\t"                      \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%1, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=&r" (value), "=r" (res)         \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _LoadWU(addr, value, res, type)  \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
+			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
+			"dsll\t%0, %0, 32\n\t"              \
+			"dsrl\t%0, %0, 32\n\t"              \
+			"li\t%1, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			"\t.section\t.fixup,\"ax\"\n\t"     \
+			"4:\tli\t%1, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=&r" (value), "=r" (res)         \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#define     _LoadDW(addr, value, res)  \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			"1:\tldl\t%0, 7(%2)\n"              \
+			"2:\tldr\t%0, (%2)\n\t"             \
+			"li\t%1, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			"\t.section\t.fixup,\"ax\"\n\t"     \
+			"4:\tli\t%1, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=&r" (value), "=r" (res)         \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#else
+/* MIPSR6 has not lwl and ldl instructions */
+#define	    _LoadWU(addr, value, res, type) \
+do {                                                        \
+		__asm__ __volatile__ (			    \
+			".set\tpush\n\t"		    \
+			".set\tnoat\n\t"		    \
+			"1:"type##_lbu("%0", "3(%2)")"\n\t" \
+			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
+			"sll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"li\t%1, 0\n"			    \
+			".set\tpop\n"			    \
+			"10:\n\t"			    \
+			".insn\n\t"			    \
+			".section\t.fixup,\"ax\"\n\t"	    \
+			"11:\tli\t%1, %3\n\t"		    \
+			"j\t10b\n\t"			    \
+			".previous\n\t"			    \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 11b\n\t"		    \
+			STR(PTR)"\t2b, 11b\n\t"		    \
+			STR(PTR)"\t3b, 11b\n\t"		    \
+			STR(PTR)"\t4b, 11b\n\t"		    \
+			".previous"			    \
+			: "=&r" (value), "=r" (res)	    \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#define     _LoadDW(addr, value, res)  \
+do {                                                        \
+		__asm__ __volatile__ (			    \
+			".set\tpush\n\t"		    \
+			".set\tnoat\n\t"		    \
+			"1:lb\t%0, 7(%2)\n\t"    	    \
+			"2:lbu\t$1, 6(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"3:lbu\t$1, 5(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"4:lbu\t$1, 4(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"5:lbu\t$1, 3(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"6:lbu\t$1, 2(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"7:lbu\t$1, 1(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"8:lbu\t$1, 0(%2)\n\t"   	    \
+			"dsll\t%0, 0x8\n\t"		    \
+			"or\t%0, $1\n\t"		    \
+			"li\t%1, 0\n"			    \
+			".set\tpop\n\t"			    \
+			"10:\n\t"			    \
+			".insn\n\t"			    \
+			".section\t.fixup,\"ax\"\n\t"	    \
+			"11:\tli\t%1, %3\n\t"		    \
+			"j\t10b\n\t"			    \
+			".previous\n\t"			    \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 11b\n\t"		    \
+			STR(PTR)"\t2b, 11b\n\t"		    \
+			STR(PTR)"\t3b, 11b\n\t"		    \
+			STR(PTR)"\t4b, 11b\n\t"		    \
+			STR(PTR)"\t5b, 11b\n\t"		    \
+			STR(PTR)"\t6b, 11b\n\t"		    \
+			STR(PTR)"\t7b, 11b\n\t"		    \
+			STR(PTR)"\t8b, 11b\n\t"		    \
+			".previous"			    \
+			: "=&r" (value), "=r" (res)	    \
+			: "r" (addr), "i" (-EFAULT));       \
+} while(0)
+#endif /* CONFIG_CPU_MIPSR6 */
+
+#define     _StoreHW(addr, value, res, type) \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			".set\tnoat\n"                      \
+			"1:\t"type##_sb("%1", "0(%2)")"\n"  \
+			"srl\t$1,%1, 0x8\n"                 \
+			"2:\t"type##_sb("$1", "1(%2)")"\n"  \
+			".set\tat\n\t"                      \
+			"li\t%0, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%0, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+			: "=r" (res)                        \
+			: "r" (value), "r" (addr), "i" (-EFAULT));\
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _StoreW(addr, value, res, type)  \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			"1:\t"type##_swl("%1", "3(%2)")"\n" \
+			"2:\t"type##_swr("%1", "(%2)")"\n\t"\
+			"li\t%0, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%0, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+		: "=r" (res)                                \
+		: "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while(0)
+
+#define     _StoreDW(addr, value, res) \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			"1:\tsdl\t%1, 7(%2)\n"              \
+			"2:\tsdr\t%1, (%2)\n\t"             \
+			"li\t%0, 0\n"                       \
+			"3:\n\t"                            \
+			".insn\n\t"                         \
+			".section\t.fixup,\"ax\"\n\t"       \
+			"4:\tli\t%0, %3\n\t"                \
+			"j\t3b\n\t"                         \
+			".previous\n\t"                     \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 4b\n\t"              \
+			STR(PTR)"\t2b, 4b\n\t"              \
+			".previous"                         \
+		: "=r" (res)                                \
+		: "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while(0)
+
+#else
+/* MIPSR6 has no swl and sdl instructions */
+#define     _StoreW(addr, value, res, type)  \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			".set\tpush\n\t"		    \
+			".set\tnoat\n\t"		    \
+			"1:"type##_sb("%1", "0(%2)")"\n\t"  \
+			"srl\t$1, %1, 0x8\n\t"		    \
+			"2:"type##_sb("$1", "1(%2)")"\n\t"  \
+			"srl\t$1, $1,  0x8\n\t"		    \
+			"3:"type##_sb("$1", "2(%2)")"\n\t"  \
+			"srl\t$1, $1, 0x8\n\t"		    \
+			"4:"type##_sb("$1", "3(%2)")"\n\t"  \
+			".set\tpop\n\t"			    \
+			"li\t%0, 0\n"			    \
+			"10:\n\t"			    \
+			".insn\n\t"			    \
+			".section\t.fixup,\"ax\"\n\t"	    \
+			"11:\tli\t%0, %3\n\t"		    \
+			"j\t10b\n\t"			    \
+			".previous\n\t"			    \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 11b\n\t"		    \
+			STR(PTR)"\t2b, 11b\n\t"		    \
+			STR(PTR)"\t3b, 11b\n\t"		    \
+			STR(PTR)"\t4b, 11b\n\t"		    \
+			".previous"			    \
+		: "=&r" (res)			    	    \
+		: "r" (value), "r" (addr), "i" (-EFAULT)    \
+		: "memory");                                \
+} while(0)
+
+#define     _StoreDW(addr, value, res) \
+do {                                                        \
+		__asm__ __volatile__ (                      \
+			".set\tpush\n\t"		    \
+			".set\tnoat\n\t"		    \
+			"1:sb\t%1, 0(%2)\n\t"    	    \
+			"dsrl\t$1, %1, 0x8\n\t"		    \
+			"2:sb\t$1, 1(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"3:sb\t$1, 2(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"4:sb\t$1, 3(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"5:sb\t$1, 4(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"6:sb\t$1, 5(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"7:sb\t$1, 6(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			"8:sb\t$1, 7(%2)\n\t"    	    \
+			"dsrl\t$1, $1, 0x8\n\t"		    \
+			".set\tpop\n\t"			    \
+			"li\t%0, 0\n"			    \
+			"10:\n\t"			    \
+			".insn\n\t"			    \
+			".section\t.fixup,\"ax\"\n\t"	    \
+			"11:\tli\t%0, %3\n\t"		    \
+			"j\t10b\n\t"			    \
+			".previous\n\t"			    \
+			".section\t__ex_table,\"a\"\n\t"    \
+			STR(PTR)"\t1b, 11b\n\t"		    \
+			STR(PTR)"\t2b, 11b\n\t"		    \
+			STR(PTR)"\t3b, 11b\n\t"		    \
+			STR(PTR)"\t4b, 11b\n\t"		    \
+			STR(PTR)"\t5b, 11b\n\t"		    \
+			STR(PTR)"\t6b, 11b\n\t"		    \
+			STR(PTR)"\t7b, 11b\n\t"		    \
+			STR(PTR)"\t8b, 11b\n\t"		    \
+			".previous"			    \
+		: "=&r" (res)			    	    \
+		: "r" (value), "r" (addr), "i" (-EFAULT)    \
+		: "memory");                                \
+} while(0)
+
+#endif /* CONFIG_CPU_MIPSR6 */
+#endif
+
+#define LoadHWU(addr, value, res)	_LoadHWU(addr, value, res, kernel)
+#define LoadHWUE(addr, value, res)	_LoadHWU(addr, value, res, user)
+#define LoadWU(addr, value, res)	_LoadWU(addr, value, res, kernel)
+#define LoadWUE(addr, value, res)	_LoadWU(addr, value, res, user)
+#define LoadHW(addr, value, res)	_LoadHW(addr, value, res, kernel)
+#define LoadHWE(addr, value, res)	_LoadHW(addr, value, res, user)
+#define LoadW(addr, value, res)		_LoadW(addr, value, res, kernel)
+#define LoadWE(addr, value, res)	_LoadW(addr, value, res, user)
+#define LoadDW(addr, value, res)	_LoadDW(addr, value, res)
+
+#define StoreHW(addr, value, res)	_StoreHW(addr, value, res, kernel)
+#define StoreHWE(addr, value, res)	_StoreHW(addr, value, res, user)
+#define StoreW(addr, value, res)	_StoreW(addr, value, res, kernel)
+#define StoreWE(addr, value, res)	_StoreW(addr, value, res, user)
+#define StoreDW(addr, value, res)	_StoreDW(addr, value, res)
+
+static void emulate_load_store_insn(struct pt_regs *regs,
+	void __user *addr, unsigned int __user *pc)
+{
+	union mips_instruction insn;
+	unsigned long value;
+	unsigned int res;
+	unsigned long origpc;
+	unsigned long orig31;
+	void __user *fault_addr = NULL;
+#ifdef	CONFIG_EVA
+	mm_segment_t seg;
+#endif
+	origpc = (unsigned long)pc;
+	orig31 = regs->regs[31];
+
+	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
+
+	/*
+	 * This load never faults.
+	 */
+	__get_user(insn.word, pc);
+
+	switch (insn.i_format.opcode) {
+		/*
+		 * These are instructions that a compiler doesn't generate.  We
+		 * can assume therefore that the code is MIPS-aware and
+		 * really buggy.  Emulating these instructions would break the
+		 * semantics anyway.
+		 */
+	case ll_op:
+	case lld_op:
+	case sc_op:
+	case scd_op:
+
+		/*
+		 * For these instructions the only way to create an address
+		 * error is an attempted access to kernel/supervisor address
+		 * space.
+		 */
+	case ldl_op:
+	case ldr_op:
+	case lwl_op:
+	case lwr_op:
+	case sdl_op:
+	case sdr_op:
+	case swl_op:
+	case swr_op:
+	case lb_op:
+	case lbu_op:
+	case sb_op:
+		goto sigbus;
+
+		/*
+		 * The remaining opcodes are the ones that are really of
+		 * interest.
+		 */
+#ifdef CONFIG_EVA
+	case spec3_op:
+		/*
+		 * we can land here only from kernel accessing user memory,
+		 * so we need to "switch" the address limit to user space, so
+		 * address check can work properly.
+		 */
+		seg = get_fs();
+		set_fs(USER_DS);
+		switch (insn.spec3_format.func) {
+		case lhe_op:
+			if (!access_ok(VERIFY_READ, addr, 2)) {
+				set_fs(seg);
+				goto sigbus;
+			}
+			LoadHWE(addr, value, res);
+			if (res) {
+				set_fs(seg);
+				goto fault;
+			}
+			compute_return_epc(regs);
+			regs->regs[insn.spec3_format.rt] = value;
+			break;
+		case lwe_op:
+			if (!access_ok(VERIFY_READ, addr, 4)) {
+				set_fs(seg);
+				goto sigbus;
+			}
+				LoadWE(addr, value, res);
+			if (res) {
+				set_fs(seg);
+				goto fault;
+			}
+			compute_return_epc(regs);
+			regs->regs[insn.spec3_format.rt] = value;
+			break;
+		case lhue_op:
+			if (!access_ok(VERIFY_READ, addr, 2)) {
+				set_fs(seg);
+				goto sigbus;
+			}
+			LoadHWUE(addr, value, res);
+			if (res) {
+				set_fs(seg);
+				goto fault;
+			}
+			compute_return_epc(regs);
+			regs->regs[insn.spec3_format.rt] = value;
+			break;
+		case she_op:
+			if (!access_ok(VERIFY_WRITE, addr, 2)) {
+				set_fs(seg);
+				goto sigbus;
+			}
+			compute_return_epc(regs);
+			value = regs->regs[insn.spec3_format.rt];
+			StoreHWE(addr, value, res);
+			if (res) {
+				set_fs(seg);
+				goto fault;
+			}
+			break;
+		case swe_op:
+			if (!access_ok(VERIFY_WRITE, addr, 4)) {
+				set_fs(seg);
+				goto sigbus;
+			}
+			compute_return_epc(regs);
+			value = regs->regs[insn.spec3_format.rt];
+			StoreWE(addr, value, res);
+			if (res) {
+				set_fs(seg);
+				goto fault;
+			}
+			break;
+		default:
+			set_fs(seg);
+			goto sigill;
+		}
+		set_fs(seg);
+		break;
+#endif
+	case lh_op:
+		if (!access_ok(VERIFY_READ, addr, 2))
+			goto sigbus;
+
+		if (config_enabled(CONFIG_EVA)) {
+			if (segment_eq(get_fs(), get_ds()))
+				LoadHW(addr, value, res);
+			else
+				LoadHWE(addr, value, res);
+		} else {
+			LoadHW(addr, value, res);
+		}
+
+		if (res)
+			goto fault;
+		compute_return_epc(regs);
+		regs->regs[insn.i_format.rt] = value;
+		break;
+
+	case lw_op:
+		if (!access_ok(VERIFY_READ, addr, 4))
+			goto sigbus;
+
+		if (config_enabled(CONFIG_EVA)) {
+			if (segment_eq(get_fs(), get_ds()))
+				LoadW(addr, value, res);
+			else
+				LoadWE(addr, value, res);
+		} else {
+			LoadW(addr, value, res);
+		}
+
+		if (res)
+			goto fault;
+		compute_return_epc(regs);
+		regs->regs[insn.i_format.rt] = value;
+		break;
+
+	case lhu_op:
+		if (!access_ok(VERIFY_READ, addr, 2))
+			goto sigbus;
+
+		if (config_enabled(CONFIG_EVA)) {
+			if (segment_eq(get_fs(), get_ds()))
+				LoadHWU(addr, value, res);
+			else
+				LoadHWUE(addr, value, res);
+		} else {
+			LoadHWU(addr, value, res);
+		}
+
+		if (res)
+			goto fault;
+		compute_return_epc(regs);
+		regs->regs[insn.i_format.rt] = value;
+		break;
+
+	case lwu_op:
+#ifdef CONFIG_64BIT
+		/*
+		 * A 32-bit kernel might be running on a 64-bit processor.  But
+		 * if we're on a 32-bit processor and an i-cache incoherency
+		 * or race makes us see a 64-bit instruction here the sdl/sdr
+		 * would blow up, so for now we don't handle unaligned 64-bit
+		 * instructions on 32-bit kernels.
+		 */
+		if (!access_ok(VERIFY_READ, addr, 4))
+			goto sigbus;
+
+		LoadWU(addr, value, res);
+		if (res)
+			goto fault;
+		compute_return_epc(regs);
+		regs->regs[insn.i_format.rt] = value;
+		break;
+#endif /* CONFIG_64BIT */
+
+		/* Cannot handle 64-bit instructions in 32-bit kernel */
+		goto sigill;
+
+	case ld_op:
+#ifdef CONFIG_64BIT
+		/*
+		 * A 32-bit kernel might be running on a 64-bit processor.  But
+		 * if we're on a 32-bit processor and an i-cache incoherency
+		 * or race makes us see a 64-bit instruction here the sdl/sdr
+		 * would blow up, so for now we don't handle unaligned 64-bit
+		 * instructions on 32-bit kernels.
+		 */
+		if (!access_ok(VERIFY_READ, addr, 8))
+			goto sigbus;
+
+		LoadDW(addr, value, res);
+		if (res)
+			goto fault;
+		compute_return_epc(regs);
+		regs->regs[insn.i_format.rt] = value;
+		break;
+#endif /* CONFIG_64BIT */
+
+		/* Cannot handle 64-bit instructions in 32-bit kernel */
+		goto sigill;
+
+	case sh_op:
+		if (!access_ok(VERIFY_WRITE, addr, 2))
+			goto sigbus;
+
+		compute_return_epc(regs);
+		value = regs->regs[insn.i_format.rt];
+
+		if (config_enabled(CONFIG_EVA)) {
+			if (segment_eq(get_fs(), get_ds()))
+				StoreHW(addr, value, res);
+			else
+				StoreHWE(addr, value, res);
+		} else {
+			StoreHW(addr, value, res);
+		}
+
+		if (res)
+			goto fault;
+		break;
+
+	case sw_op:
+		if (!access_ok(VERIFY_WRITE, addr, 4))
+			goto sigbus;
+
+		compute_return_epc(regs);
+		value = regs->regs[insn.i_format.rt];
+
+		if (config_enabled(CONFIG_EVA)) {
+			if (segment_eq(get_fs(), get_ds()))
+				StoreW(addr, value, res);
+			else
+				StoreWE(addr, value, res);
+		} else {
+			StoreW(addr, value, res);
+		}
+
+		if (res)
+			goto fault;
+		break;
+
+	case sd_op:
+#ifdef CONFIG_64BIT
+		/*
+		 * A 32-bit kernel might be running on a 64-bit processor.  But
+		 * if we're on a 32-bit processor and an i-cache incoherency
+		 * or race makes us see a 64-bit instruction here the sdl/sdr
+		 * would blow up, so for now we don't handle unaligned 64-bit
+		 * instructions on 32-bit kernels.
+		 */
+		if (!access_ok(VERIFY_WRITE, addr, 8))
+			goto sigbus;
+
+		compute_return_epc(regs);
+		value = regs->regs[insn.i_format.rt];
+		StoreDW(addr, value, res);
+		if (res)
+			goto fault;
+		break;
+#endif /* CONFIG_64BIT */
+
+		/* Cannot handle 64-bit instructions in 32-bit kernel */
+		goto sigill;
+
+	case lwc1_op:
+	case ldc1_op:
+	case swc1_op:
+	case sdc1_op:
+		die_if_kernel("Unaligned FP access in kernel code", regs);
+		BUG_ON(!used_math());
+
+		lose_fpu(1);	/* Save FPU state for the emulator. */
+		res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
+					       &fault_addr);
+		own_fpu(1);	/* Restore FPU state. */
+
+		/* Signal if something went wrong. */
+		process_fpemu_return(res, fault_addr, 0);
+
+		if (res == 0)
+			break;
+		return;
+
+#ifndef CONFIG_CPU_MIPSR6
+	/*
+	 * COP2 is available to implementor for application specific use.
+	 * It's up to applications to register a notifier chain and do
+	 * whatever they have to do, including possible sending of signals.
+	 *
+	 * This instruction has been reallocated in Release 6
+	 */
+	case lwc2_op:
+		cu2_notifier_call_chain(CU2_LWC2_OP, regs);
+		break;
+
+	case ldc2_op:
+		cu2_notifier_call_chain(CU2_LDC2_OP, regs);
+		break;
+
+	case swc2_op:
+		cu2_notifier_call_chain(CU2_SWC2_OP, regs);
+		break;
+
+	case sdc2_op:
+		cu2_notifier_call_chain(CU2_SDC2_OP, regs);
+		break;
+#endif
+	default:
+		/*
+		 * Pheeee...  We encountered an yet unknown instruction or
+		 * cache coherence problem.  Die sucker, die ...
+		 */
+		goto sigill;
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	unaligned_instructions++;
+#endif
+
+	return;
+
+fault:
+	/* roll back jump/branch */
+	regs->cp0_epc = origpc;
+	regs->regs[31] = orig31;
+	/* Did we have an exception handler installed? */
+	if (fixup_exception(regs))
+		return;
+
+	die_if_kernel("Unhandled kernel unaligned access", regs);
+	force_sig(SIGSEGV, current);
+
+	return;
+
+sigbus:
+	die_if_kernel("Unhandled kernel unaligned access", regs);
+	force_sig(SIGBUS, current);
+
+	return;
+
+sigill:
+	die_if_kernel
+	    ("Unhandled kernel unaligned access or invalid instruction", regs);
+	force_sig(SIGILL, current);
+}
+
+/* Recode table from 16-bit register notation to 32-bit GPR. */
+const int reg16to32[] = { 16, 17, 2, 3, 4, 5, 6, 7 };
+
+/* Recode table from 16-bit STORE register notation to 32-bit GPR. */
+const int reg16to32st[] = { 0, 17, 2, 3, 4, 5, 6, 7 };
+
+static void emulate_load_store_microMIPS(struct pt_regs *regs,
+					 void __user *addr)
+{
+	unsigned long value;
+	unsigned int res;
+	int i;
+	unsigned int reg = 0, rvar;
+	unsigned long orig31;
+	u16 __user *pc16;
+	u16 halfword;
+	unsigned int word;
+	unsigned long origpc, contpc;
+	union mips_instruction insn;
+	struct mm_decoded_insn mminsn;
+	void __user *fault_addr = NULL;
+
+	origpc = regs->cp0_epc;
+	orig31 = regs->regs[31];
+
+	mminsn.micro_mips_mode = 1;
+
+	/*
+	 * This load never faults.
+	 */
+	pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc);
+	__get_user(halfword, pc16);
+	pc16++;
+	contpc = regs->cp0_epc + 2;
+	word = ((unsigned int)halfword << 16);
+	mminsn.pc_inc = 2;
+
+	if (!mm_insn_16bit(halfword)) {
+		__get_user(halfword, pc16);
+		pc16++;
+		contpc = regs->cp0_epc + 4;
+		mminsn.pc_inc = 4;
+		word |= halfword;
+	}
+	mminsn.insn = word;
+
+	if (get_user(halfword, pc16))
+		goto fault;
+	mminsn.next_pc_inc = 2;
+	word = ((unsigned int)halfword << 16);
+
+	if (!mm_insn_16bit(halfword)) {
+		pc16++;
+		if (get_user(halfword, pc16))
+			goto fault;
+		mminsn.next_pc_inc = 4;
+		word |= halfword;
+	}
+	mminsn.next_insn = word;
+
+	insn = (union mips_instruction)(mminsn.insn);
+	if (mm_isBranchInstr(regs, mminsn, &contpc))
+		insn = (union mips_instruction)(mminsn.next_insn);
+
+	/*  Parse instruction to find what to do */
+
+	switch (insn.mm_i_format.opcode) {
+
+	case mm_pool32a_op:
+		switch (insn.mm_x_format.func) {
+		case mm_lwxs_op:
+			reg = insn.mm_x_format.rd;
+			goto loadW;
+		}
+
+		goto sigbus;
+
+	case mm_pool32b_op:
+		switch (insn.mm_m_format.func) {
+		case mm_lwp_func:
+			reg = insn.mm_m_format.rd;
+			if (reg == 31)
+				goto sigbus;
+
+			if (!access_ok(VERIFY_READ, addr, 8))
+				goto sigbus;
+
+			LoadW(addr, value, res);
+			if (res)
+				goto fault;
+			regs->regs[reg] = value;
+			addr += 4;
+			LoadW(addr, value, res);
+			if (res)
+				goto fault;
+			regs->regs[reg + 1] = value;
+			goto success;
+
+		case mm_swp_func:
+			reg = insn.mm_m_format.rd;
+			if (reg == 31)
+				goto sigbus;
+
+			if (!access_ok(VERIFY_WRITE, addr, 8))
+				goto sigbus;
+
+			value = regs->regs[reg];
+			StoreW(addr, value, res);
+			if (res)
+				goto fault;
+			addr += 4;
+			value = regs->regs[reg + 1];
+			StoreW(addr, value, res);
+			if (res)
+				goto fault;
+			goto success;
+
+		case mm_ldp_func:
+#ifdef CONFIG_64BIT
+			reg = insn.mm_m_format.rd;
+			if (reg == 31)
+				goto sigbus;
+
+			if (!access_ok(VERIFY_READ, addr, 16))
+				goto sigbus;
+
+			LoadDW(addr, value, res);
+			if (res)
+				goto fault;
+			regs->regs[reg] = value;
+			addr += 8;
+			LoadDW(addr, value, res);
+			if (res)
+				goto fault;
+			regs->regs[reg + 1] = value;
+			goto success;
+#endif /* CONFIG_64BIT */
+
+			goto sigill;
+
+		case mm_sdp_func:
+#ifdef CONFIG_64BIT
+			reg = insn.mm_m_format.rd;
+			if (reg == 31)
+				goto sigbus;
+
+			if (!access_ok(VERIFY_WRITE, addr, 16))
+				goto sigbus;
+
+			value = regs->regs[reg];
+			StoreDW(addr, value, res);
+			if (res)
+				goto fault;
+			addr += 8;
+			value = regs->regs[reg + 1];
+			StoreDW(addr, value, res);
+			if (res)
+				goto fault;
+			goto success;
+#endif /* CONFIG_64BIT */
+
+			goto sigill;
+
+		case mm_lwm32_func:
+			reg = insn.mm_m_format.rd;
+			rvar = reg & 0xf;
+			if ((rvar > 9) || !reg)
+				goto sigill;
+			if (reg & 0x10) {
+				if (!access_ok
+				    (VERIFY_READ, addr, 4 * (rvar + 1)))
+					goto sigbus;
+			} else {
+				if (!access_ok(VERIFY_READ, addr, 4 * rvar))
+					goto sigbus;
+			}
+			if (rvar == 9)
+				rvar = 8;
+			for (i = 16; rvar; rvar--, i++) {
+				LoadW(addr, value, res);
+				if (res)
+					goto fault;
+				addr += 4;
+				regs->regs[i] = value;
+			}
+			if ((reg & 0xf) == 9) {
+				LoadW(addr, value, res);
+				if (res)
+					goto fault;
+				addr += 4;
+				regs->regs[30] = value;
+			}
+			if (reg & 0x10) {
+				LoadW(addr, value, res);
+				if (res)
+					goto fault;
+				regs->regs[31] = value;
+			}
+			goto success;
+
+		case mm_swm32_func:
+			reg = insn.mm_m_format.rd;
+			rvar = reg & 0xf;
+			if ((rvar > 9) || !reg)
+				goto sigill;
+			if (reg & 0x10) {
+				if (!access_ok
+				    (VERIFY_WRITE, addr, 4 * (rvar + 1)))
+					goto sigbus;
+			} else {
+				if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
+					goto sigbus;
+			}
+			if (rvar == 9)
+				rvar = 8;
+			for (i = 16; rvar; rvar--, i++) {
+				value = regs->regs[i];
+				StoreW(addr, value, res);
+				if (res)
+					goto fault;
+				addr += 4;
+			}
+			if ((reg & 0xf) == 9) {
+				value = regs->regs[30];
+				StoreW(addr, value, res);
+				if (res)
+					goto fault;
+				addr += 4;
+			}
+			if (reg & 0x10) {
+				value = regs->regs[31];
+				StoreW(addr, value, res);
+				if (res)
+					goto fault;
+			}
+			goto success;
+
+		case mm_ldm_func:
+#ifdef CONFIG_64BIT
+			reg = insn.mm_m_format.rd;
+			rvar = reg & 0xf;
+			if ((rvar > 9) || !reg)
+				goto sigill;
+			if (reg & 0x10) {
+				if (!access_ok
+				    (VERIFY_READ, addr, 8 * (rvar + 1)))
+					goto sigbus;
+			} else {
+				if (!access_ok(VERIFY_READ, addr, 8 * rvar))
+					goto sigbus;
+			}
+			if (rvar == 9)
+				rvar = 8;
+
+			for (i = 16; rvar; rvar--, i++) {
+				LoadDW(addr, value, res);
+				if (res)
+					goto fault;
+				addr += 4;
+				regs->regs[i] = value;
+			}
+			if ((reg & 0xf) == 9) {
+				LoadDW(addr, value, res);
+				if (res)
+					goto fault;
+				addr += 8;
+				regs->regs[30] = value;
+			}
+			if (reg & 0x10) {
+				LoadDW(addr, value, res);
+				if (res)
+					goto fault;
+				regs->regs[31] = value;
+			}
+			goto success;
+#endif /* CONFIG_64BIT */
+
+			goto sigill;
+
+		case mm_sdm_func:
+#ifdef CONFIG_64BIT
+			reg = insn.mm_m_format.rd;
+			rvar = reg & 0xf;
+			if ((rvar > 9) || !reg)
+				goto sigill;
+			if (reg & 0x10) {
+				if (!access_ok
+				    (VERIFY_WRITE, addr, 8 * (rvar + 1)))
+					goto sigbus;
+			} else {
+				if (!access_ok(VERIFY_WRITE, addr, 8 * rvar))
+					goto sigbus;
+			}
+			if (rvar == 9)
+				rvar = 8;
+
+			for (i = 16; rvar; rvar--, i++) {
+				value = regs->regs[i];
+				StoreDW(addr, value, res);
+				if (res)
+					goto fault;
+				addr += 8;
+			}
+			if ((reg & 0xf) == 9) {
+				value = regs->regs[30];
+				StoreDW(addr, value, res);
+				if (res)
+					goto fault;
+				addr += 8;
+			}
+			if (reg & 0x10) {
+				value = regs->regs[31];
+				StoreDW(addr, value, res);
+				if (res)
+					goto fault;
+			}
+			goto success;
+#endif /* CONFIG_64BIT */
+
+			goto sigill;
+
+			/*  LWC2, SWC2, LDC2, SDC2 are not serviced */
+		}
+
+		goto sigbus;
+
+	case mm_pool32c_op:
+		switch (insn.mm_m_format.func) {
+		case mm_lwu_func:
+			reg = insn.mm_m_format.rd;
+			goto loadWU;
+		}
+
+		/*  LL,SC,LLD,SCD are not serviced */
+		goto sigbus;
+
+	case mm_pool32f_op:
+		switch (insn.mm_x_format.func) {
+		case mm_lwxc1_func:
+		case mm_swxc1_func:
+		case mm_ldxc1_func:
+		case mm_sdxc1_func:
+			goto fpu_emul;
+		}
+
+		goto sigbus;
+
+	case mm_ldc132_op:
+	case mm_sdc132_op:
+	case mm_lwc132_op:
+	case mm_swc132_op:
+fpu_emul:
+		/* roll back jump/branch */
+		regs->cp0_epc = origpc;
+		regs->regs[31] = orig31;
+
+		die_if_kernel("Unaligned FP access in kernel code", regs);
+		BUG_ON(!used_math());
+		BUG_ON(!is_fpu_owner());
+
+		lose_fpu(1);	/* save the FPU state for the emulator */
+		res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
+					       &fault_addr);
+		own_fpu(1);	/* restore FPU state */
+
+		/* If something went wrong, signal */
+		process_fpemu_return(res, fault_addr, 0);
+
+		if (res == 0)
+			goto success;
+		return;
+
+	case mm_lh32_op:
+		reg = insn.mm_i_format.rt;
+		goto loadHW;
+
+	case mm_lhu32_op:
+		reg = insn.mm_i_format.rt;
+		goto loadHWU;
+
+	case mm_lw32_op:
+		reg = insn.mm_i_format.rt;
+		goto loadW;
+
+	case mm_sh32_op:
+		reg = insn.mm_i_format.rt;
+		goto storeHW;
+
+	case mm_sw32_op:
+		reg = insn.mm_i_format.rt;
+		goto storeW;
+
+	case mm_ld32_op:
+		reg = insn.mm_i_format.rt;
+		goto loadDW;
+
+	case mm_sd32_op:
+		reg = insn.mm_i_format.rt;
+		goto storeDW;
+
+	case mm_pool16c_op:
+		switch (insn.mm16_m_format.func) {
+		case mm_lwm16_op:
+			reg = insn.mm16_m_format.rlist;
+			rvar = reg + 1;
+			if (!access_ok(VERIFY_READ, addr, 4 * rvar))
+				goto sigbus;
+
+			for (i = 16; rvar; rvar--, i++) {
+				LoadW(addr, value, res);
+				if (res)
+					goto fault;
+				addr += 4;
+				regs->regs[i] = value;
+			}
+			LoadW(addr, value, res);
+			if (res)
+				goto fault;
+			regs->regs[31] = value;
+
+			goto success;
+
+		case mm_swm16_op:
+			reg = insn.mm16_m_format.rlist;
+			rvar = reg + 1;
+			if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
+				goto sigbus;
+
+			for (i = 16; rvar; rvar--, i++) {
+				value = regs->regs[i];
+				StoreW(addr, value, res);
+				if (res)
+					goto fault;
+				addr += 4;
+			}
+			value = regs->regs[31];
+			StoreW(addr, value, res);
+			if (res)
+				goto fault;
+
+			goto success;
+
+		}
+
+		goto sigbus;
+
+	case mm_lhu16_op:
+		reg = reg16to32[insn.mm16_rb_format.rt];
+		goto loadHWU;
+
+	case mm_lw16_op:
+		reg = reg16to32[insn.mm16_rb_format.rt];
+		goto loadW;
+
+	case mm_sh16_op:
+		reg = reg16to32st[insn.mm16_rb_format.rt];
+		goto storeHW;
+
+	case mm_sw16_op:
+		reg = reg16to32st[insn.mm16_rb_format.rt];
+		goto storeW;
+
+	case mm_lwsp16_op:
+		reg = insn.mm16_r5_format.rt;
+		goto loadW;
+
+	case mm_swsp16_op:
+		reg = insn.mm16_r5_format.rt;
+		goto storeW;
+
+	case mm_lwgp16_op:
+		reg = reg16to32[insn.mm16_r3_format.rt];
+		goto loadW;
+
+	default:
+		goto sigill;
+	}
+
+loadHW:
+	if (!access_ok(VERIFY_READ, addr, 2))
+		goto sigbus;
+
+	LoadHW(addr, value, res);
+	if (res)
+		goto fault;
+	regs->regs[reg] = value;
+	goto success;
+
+loadHWU:
+	if (!access_ok(VERIFY_READ, addr, 2))
+		goto sigbus;
+
+	LoadHWU(addr, value, res);
+	if (res)
+		goto fault;
+	regs->regs[reg] = value;
+	goto success;
+
+loadW:
+	if (!access_ok(VERIFY_READ, addr, 4))
+		goto sigbus;
+
+	LoadW(addr, value, res);
+	if (res)
+		goto fault;
+	regs->regs[reg] = value;
+	goto success;
+
+loadWU:
+#ifdef CONFIG_64BIT
+	/*
+	 * A 32-bit kernel might be running on a 64-bit processor.  But
+	 * if we're on a 32-bit processor and an i-cache incoherency
+	 * or race makes us see a 64-bit instruction here the sdl/sdr
+	 * would blow up, so for now we don't handle unaligned 64-bit
+	 * instructions on 32-bit kernels.
+	 */
+	if (!access_ok(VERIFY_READ, addr, 4))
+		goto sigbus;
+
+	LoadWU(addr, value, res);
+	if (res)
+		goto fault;
+	regs->regs[reg] = value;
+	goto success;
+#endif /* CONFIG_64BIT */
+
+	/* Cannot handle 64-bit instructions in 32-bit kernel */
+	goto sigill;
+
+loadDW:
+#ifdef CONFIG_64BIT
+	/*
+	 * A 32-bit kernel might be running on a 64-bit processor.  But
+	 * if we're on a 32-bit processor and an i-cache incoherency
+	 * or race makes us see a 64-bit instruction here the sdl/sdr
+	 * would blow up, so for now we don't handle unaligned 64-bit
+	 * instructions on 32-bit kernels.
+	 */
+	if (!access_ok(VERIFY_READ, addr, 8))
+		goto sigbus;
+
+	LoadDW(addr, value, res);
+	if (res)
+		goto fault;
+	regs->regs[reg] = value;
+	goto success;
+#endif /* CONFIG_64BIT */
+
+	/* Cannot handle 64-bit instructions in 32-bit kernel */
+	goto sigill;
+
+storeHW:
+	if (!access_ok(VERIFY_WRITE, addr, 2))
+		goto sigbus;
+
+	value = regs->regs[reg];
+	StoreHW(addr, value, res);
+	if (res)
+		goto fault;
+	goto success;
+
+storeW:
+	if (!access_ok(VERIFY_WRITE, addr, 4))
+		goto sigbus;
+
+	value = regs->regs[reg];
+	StoreW(addr, value, res);
+	if (res)
+		goto fault;
+	goto success;
+
+storeDW:
+#ifdef CONFIG_64BIT
+	/*
+	 * A 32-bit kernel might be running on a 64-bit processor.  But
+	 * if we're on a 32-bit processor and an i-cache incoherency
+	 * or race makes us see a 64-bit instruction here the sdl/sdr
+	 * would blow up, so for now we don't handle unaligned 64-bit
+	 * instructions on 32-bit kernels.
+	 */
+	if (!access_ok(VERIFY_WRITE, addr, 8))
+		goto sigbus;
+
+	value = regs->regs[reg];
+	StoreDW(addr, value, res);
+	if (res)
+		goto fault;
+	goto success;
+#endif /* CONFIG_64BIT */
+
+	/* Cannot handle 64-bit instructions in 32-bit kernel */
+	goto sigill;
+
+success:
+	regs->cp0_epc = contpc;	/* advance or branch */
+
+#ifdef CONFIG_DEBUG_FS
+	unaligned_instructions++;
+#endif
+	return;
+
+fault:
+	/* roll back jump/branch */
+	regs->cp0_epc = origpc;
+	regs->regs[31] = orig31;
+	/* Did we have an exception handler installed? */
+	if (fixup_exception(regs))
+		return;
+
+	die_if_kernel("Unhandled kernel unaligned access", regs);
+	force_sig(SIGSEGV, current);
+
+	return;
+
+sigbus:
+	die_if_kernel("Unhandled kernel unaligned access", regs);
+	force_sig(SIGBUS, current);
+
+	return;
+
+sigill:
+	die_if_kernel
+	    ("Unhandled kernel unaligned access or invalid instruction", regs);
+	force_sig(SIGILL, current);
+}
+
+static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
+{
+	unsigned long value;
+	unsigned int res;
+	int reg;
+	unsigned long orig31;
+	u16 __user *pc16;
+	unsigned long origpc;
+	union mips16e_instruction mips16inst, oldinst;
+
+	origpc = regs->cp0_epc;
+	orig31 = regs->regs[31];
+	pc16 = (unsigned short __user *)msk_isa16_mode(origpc);
+	/*
+	 * This load never faults.
+	 */
+	__get_user(mips16inst.full, pc16);
+	oldinst = mips16inst;
+
+	/* skip EXTEND instruction */
+	if (mips16inst.ri.opcode == MIPS16e_extend_op) {
+		pc16++;
+		__get_user(mips16inst.full, pc16);
+	} else if (delay_slot(regs)) {
+		/*  skip jump instructions */
+		/*  JAL/JALX are 32 bits but have OPCODE in first short int */
+		if (mips16inst.ri.opcode == MIPS16e_jal_op)
+			pc16++;
+		pc16++;
+		if (get_user(mips16inst.full, pc16))
+			goto sigbus;
+	}
+
+	switch (mips16inst.ri.opcode) {
+	case MIPS16e_i64_op:	/* I64 or RI64 instruction */
+		switch (mips16inst.i64.func) {	/* I64/RI64 func field check */
+		case MIPS16e_ldpc_func:
+		case MIPS16e_ldsp_func:
+			reg = reg16to32[mips16inst.ri64.ry];
+			goto loadDW;
+
+		case MIPS16e_sdsp_func:
+			reg = reg16to32[mips16inst.ri64.ry];
+			goto writeDW;
+
+		case MIPS16e_sdrasp_func:
+			reg = 29;	/* GPRSP */
+			goto writeDW;
+		}
+
+		goto sigbus;
+
+	case MIPS16e_swsp_op:
+	case MIPS16e_lwpc_op:
+	case MIPS16e_lwsp_op:
+		reg = reg16to32[mips16inst.ri.rx];
+		break;
+
+	case MIPS16e_i8_op:
+		if (mips16inst.i8.func != MIPS16e_swrasp_func)
+			goto sigbus;
+		reg = 29;	/* GPRSP */
+		break;
+
+	default:
+		reg = reg16to32[mips16inst.rri.ry];
+		break;
+	}
+
+	switch (mips16inst.ri.opcode) {
+
+	case MIPS16e_lb_op:
+	case MIPS16e_lbu_op:
+	case MIPS16e_sb_op:
+		goto sigbus;
+
+	case MIPS16e_lh_op:
+		if (!access_ok(VERIFY_READ, addr, 2))
+			goto sigbus;
+
+		LoadHW(addr, value, res);
+		if (res)
+			goto fault;
+		MIPS16e_compute_return_epc(regs, &oldinst);
+		regs->regs[reg] = value;
+		break;
+
+	case MIPS16e_lhu_op:
+		if (!access_ok(VERIFY_READ, addr, 2))
+			goto sigbus;
+
+		LoadHWU(addr, value, res);
+		if (res)
+			goto fault;
+		MIPS16e_compute_return_epc(regs, &oldinst);
+		regs->regs[reg] = value;
+		break;
+
+	case MIPS16e_lw_op:
+	case MIPS16e_lwpc_op:
+	case MIPS16e_lwsp_op:
+		if (!access_ok(VERIFY_READ, addr, 4))
+			goto sigbus;
+
+		LoadW(addr, value, res);
+		if (res)
+			goto fault;
+		MIPS16e_compute_return_epc(regs, &oldinst);
+		regs->regs[reg] = value;
+		break;
+
+	case MIPS16e_lwu_op:
+#ifdef CONFIG_64BIT
+		/*
+		 * A 32-bit kernel might be running on a 64-bit processor.  But
+		 * if we're on a 32-bit processor and an i-cache incoherency
+		 * or race makes us see a 64-bit instruction here the sdl/sdr
+		 * would blow up, so for now we don't handle unaligned 64-bit
+		 * instructions on 32-bit kernels.
+		 */
+		if (!access_ok(VERIFY_READ, addr, 4))
+			goto sigbus;
+
+		LoadWU(addr, value, res);
+		if (res)
+			goto fault;
+		MIPS16e_compute_return_epc(regs, &oldinst);
+		regs->regs[reg] = value;
+		break;
+#endif /* CONFIG_64BIT */
+
+		/* Cannot handle 64-bit instructions in 32-bit kernel */
+		goto sigill;
+
+	case MIPS16e_ld_op:
+loadDW:
+#ifdef CONFIG_64BIT
+		/*
+		 * A 32-bit kernel might be running on a 64-bit processor.  But
+		 * if we're on a 32-bit processor and an i-cache incoherency
+		 * or race makes us see a 64-bit instruction here the sdl/sdr
+		 * would blow up, so for now we don't handle unaligned 64-bit
+		 * instructions on 32-bit kernels.
+		 */
+		if (!access_ok(VERIFY_READ, addr, 8))
+			goto sigbus;
+
+		LoadDW(addr, value, res);
+		if (res)
+			goto fault;
+		MIPS16e_compute_return_epc(regs, &oldinst);
+		regs->regs[reg] = value;
+		break;
+#endif /* CONFIG_64BIT */
+
+		/* Cannot handle 64-bit instructions in 32-bit kernel */
+		goto sigill;
+
+	case MIPS16e_sh_op:
+		if (!access_ok(VERIFY_WRITE, addr, 2))
+			goto sigbus;
+
+		MIPS16e_compute_return_epc(regs, &oldinst);
+		value = regs->regs[reg];
+		StoreHW(addr, value, res);
+		if (res)
+			goto fault;
+		break;
+
+	case MIPS16e_sw_op:
+	case MIPS16e_swsp_op:
+	case MIPS16e_i8_op:	/* actually - MIPS16e_swrasp_func */
+		if (!access_ok(VERIFY_WRITE, addr, 4))
+			goto sigbus;
+
+		MIPS16e_compute_return_epc(regs, &oldinst);
+		value = regs->regs[reg];
+		StoreW(addr, value, res);
+		if (res)
+			goto fault;
+		break;
+
+	case MIPS16e_sd_op:
+writeDW:
+#ifdef CONFIG_64BIT
+		/*
+		 * A 32-bit kernel might be running on a 64-bit processor.  But
+		 * if we're on a 32-bit processor and an i-cache incoherency
+		 * or race makes us see a 64-bit instruction here the sdl/sdr
+		 * would blow up, so for now we don't handle unaligned 64-bit
+		 * instructions on 32-bit kernels.
+		 */
+		if (!access_ok(VERIFY_WRITE, addr, 8))
+			goto sigbus;
+
+		MIPS16e_compute_return_epc(regs, &oldinst);
+		value = regs->regs[reg];
+		StoreDW(addr, value, res);
+		if (res)
+			goto fault;
+		break;
+#endif /* CONFIG_64BIT */
+
+		/* Cannot handle 64-bit instructions in 32-bit kernel */
+		goto sigill;
+
+	default:
+		/*
+		 * Pheeee...  We encountered an yet unknown instruction or
+		 * cache coherence problem.  Die sucker, die ...
+		 */
+		goto sigill;
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	unaligned_instructions++;
+#endif
+
+	return;
+
+fault:
+	/* roll back jump/branch */
+	regs->cp0_epc = origpc;
+	regs->regs[31] = orig31;
+	/* Did we have an exception handler installed? */
+	if (fixup_exception(regs))
+		return;
+
+	die_if_kernel("Unhandled kernel unaligned access", regs);
+	force_sig(SIGSEGV, current);
+
+	return;
+
+sigbus:
+	die_if_kernel("Unhandled kernel unaligned access", regs);
+	force_sig(SIGBUS, current);
+
+	return;
+
+sigill:
+	die_if_kernel
+	    ("Unhandled kernel unaligned access or invalid instruction", regs);
+	force_sig(SIGILL, current);
+}
+
+asmlinkage void do_ade(struct pt_regs *regs)
+{
+	enum ctx_state prev_state;
+	unsigned int __user *pc;
+	mm_segment_t seg;
+
+	prev_state = exception_enter();
+	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,
+			1, regs, regs->cp0_badvaddr);
+	/*
+	 * Did we catch a fault trying to load an instruction?
+	 */
+	if (regs->cp0_badvaddr == regs->cp0_epc)
+		goto sigbus;
+
+	if (user_mode(regs) && !test_thread_flag(TIF_FIXADE))
+		goto sigbus;
+	if (unaligned_action == UNALIGNED_ACTION_SIGNAL)
+		goto sigbus;
+
+	/*
+	 * Do branch emulation only if we didn't forward the exception.
+	 * This is all so but ugly ...
+	 */
+
+	/*
+	 * Are we running in microMIPS mode?
+	 */
+	if (get_isa16_mode(regs->cp0_epc)) {
+		/*
+		 * Did we catch a fault trying to load an instruction in
+		 * 16-bit mode?
+		 */
+		if (regs->cp0_badvaddr == msk_isa16_mode(regs->cp0_epc))
+			goto sigbus;
+		if (unaligned_action == UNALIGNED_ACTION_SHOW)
+			show_registers(regs);
+
+		if (cpu_has_mmips) {
+			seg = get_fs();
+			if (!user_mode(regs))
+				set_fs(KERNEL_DS);
+			emulate_load_store_microMIPS(regs,
+				(void __user *)regs->cp0_badvaddr);
+			set_fs(seg);
+
+			return;
+		}
+
+		if (cpu_has_mips16) {
+			seg = get_fs();
+			if (!user_mode(regs))
+				set_fs(KERNEL_DS);
+			emulate_load_store_MIPS16e(regs,
+				(void __user *)regs->cp0_badvaddr);
+			set_fs(seg);
+
+			return;
+	}
+
+		goto sigbus;
+	}
+
+	if (unaligned_action == UNALIGNED_ACTION_SHOW)
+		show_registers(regs);
+	pc = (unsigned int __user *)exception_epc(regs);
+
+	seg = get_fs();
+	if (!user_mode(regs))
+		set_fs(KERNEL_DS);
+	emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc);
+	set_fs(seg);
+
+	return;
+
+sigbus:
+	die_if_kernel("Kernel unaligned instruction access", regs);
+	force_sig(SIGBUS, current);
+
+	/*
+	 * XXX On return from the signal handler we should advance the epc
+	 */
+	exception_exit(prev_state);
+}
+
+#ifdef CONFIG_DEBUG_FS
+extern struct dentry *mips_debugfs_dir;
+static int __init debugfs_unaligned(void)
+{
+	struct dentry *d;
+
+	if (!mips_debugfs_dir)
+		return -ENODEV;
+	d = debugfs_create_u32("unaligned_instructions", S_IRUGO,
+			       mips_debugfs_dir, &unaligned_instructions);
+	if (!d)
+		return -ENOMEM;
+	d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR,
+			       mips_debugfs_dir, &unaligned_action);
+	if (!d)
+		return -ENOMEM;
+	return 0;
+}
+__initcall(debugfs_unaligned);
+#endif
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
new file mode 100644
index 000000000..ed2a27872
--- /dev/null
+++ b/arch/mips/kernel/vdso.c
@@ -0,0 +1,122 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009, 2010 Cavium Networks, Inc.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/binfmts.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/unistd.h>
+#include <linux/random.h>
+
+#include <asm/vdso.h>
+#include <asm/uasm.h>
+#include <asm/processor.h>
+
+/*
+ * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
+ */
+#define __NR_O32_sigreturn		4119
+#define __NR_O32_rt_sigreturn		4193
+#define __NR_N32_rt_sigreturn		6211
+
+static struct page *vdso_page;
+
+static void __init install_trampoline(u32 *tramp, unsigned int sigreturn)
+{
+	uasm_i_addiu(&tramp, 2, 0, sigreturn);	/* li v0, sigreturn */
+	uasm_i_syscall(&tramp, 0);
+}
+
+static int __init init_vdso(void)
+{
+	struct mips_vdso *vdso;
+
+	vdso_page = alloc_page(GFP_KERNEL);
+	if (!vdso_page)
+		panic("Cannot allocate vdso");
+
+	vdso = vmap(&vdso_page, 1, 0, PAGE_KERNEL);
+	if (!vdso)
+		panic("Cannot map vdso");
+	clear_page(vdso);
+
+	install_trampoline(vdso->rt_signal_trampoline, __NR_rt_sigreturn);
+#ifdef CONFIG_32BIT
+	install_trampoline(vdso->signal_trampoline, __NR_sigreturn);
+#else
+	install_trampoline(vdso->n32_rt_signal_trampoline,
+			   __NR_N32_rt_sigreturn);
+	install_trampoline(vdso->o32_signal_trampoline, __NR_O32_sigreturn);
+	install_trampoline(vdso->o32_rt_signal_trampoline,
+			   __NR_O32_rt_sigreturn);
+#endif
+
+	vunmap(vdso);
+
+	return 0;
+}
+subsys_initcall(init_vdso);
+
+static unsigned long vdso_addr(unsigned long start)
+{
+	unsigned long offset = 0UL;
+
+	if (current->flags & PF_RANDOMIZE) {
+		offset = get_random_int();
+		offset <<= PAGE_SHIFT;
+		if (TASK_IS_32BIT_ADDR)
+			offset &= 0xfffffful;
+		else
+			offset &= 0xffffffful;
+	}
+
+	return STACK_TOP + offset;
+}
+
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+	int ret;
+	unsigned long addr;
+	struct mm_struct *mm = current->mm;
+
+	down_write(&mm->mmap_sem);
+
+	addr = vdso_addr(mm->start_stack);
+
+	addr = get_unmapped_area(NULL, addr, PAGE_SIZE, 0, 0);
+	if (IS_ERR_VALUE(addr)) {
+		ret = addr;
+		goto up_fail;
+	}
+
+	ret = install_special_mapping(mm, addr, PAGE_SIZE,
+				      VM_READ|VM_EXEC|
+				      VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
+				      &vdso_page);
+
+	if (ret)
+		goto up_fail;
+
+	mm->context.vdso = (void *)addr;
+
+up_fail:
+	up_write(&mm->mmap_sem);
+	return ret;
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
+		return "[vdso]";
+	return NULL;
+}
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
new file mode 100644
index 000000000..3b46f7ce9
--- /dev/null
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -0,0 +1,184 @@
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+#define PAGE_SIZE _PAGE_SIZE
+
+/*
+ * Put .bss..swapper_pg_dir as the first thing in .bss. This will
+ * ensure that it has .bss alignment (64K).
+ */
+#define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir)
+
+#include <asm-generic/vmlinux.lds.h>
+
+#undef mips
+#define mips mips
+OUTPUT_ARCH(mips)
+ENTRY(kernel_entry)
+PHDRS {
+	text PT_LOAD FLAGS(7);	/* RWX */
+	note PT_NOTE FLAGS(4);	/* R__ */
+}
+
+#ifdef CONFIG_32BIT
+	#ifdef CONFIG_CPU_LITTLE_ENDIAN
+		jiffies	 = jiffies_64;
+	#else
+		jiffies	 = jiffies_64 + 4;
+	#endif
+#else
+	jiffies	 = jiffies_64;
+#endif
+
+SECTIONS
+{
+#ifdef CONFIG_BOOT_ELF64
+	/* Read-only sections, merged into text segment: */
+	/* . = 0xc000000000000000; */
+
+	/* This is the value for an Origin kernel, taken from an IRIX kernel.  */
+	/* . = 0xc00000000001c000; */
+
+	/* Set the vaddr for the text segment to a value
+	 *   >= 0xa800 0000 0001 9000 if no symmon is going to configured
+	 *   >= 0xa800 0000 0030 0000 otherwise
+	 */
+
+	/* . = 0xa800000000300000; */
+	. = 0xffffffff80300000;
+#endif
+	. = VMLINUX_LOAD_ADDRESS;
+	/* read-only */
+	_text = .;	/* Text and read-only data */
+	.text : {
+		TEXT_TEXT
+		SCHED_TEXT
+		LOCK_TEXT
+		KPROBES_TEXT
+		IRQENTRY_TEXT
+		*(.text.*)
+		*(.fixup)
+		*(.gnu.warning)
+	} :text = 0
+	_etext = .;	/* End of text section */
+
+	EXCEPTION_TABLE(16)
+
+	/* Exception table for data bus errors */
+	__dbe_table : {
+		__start___dbe_table = .;
+		*(__dbe_table)
+		__stop___dbe_table = .;
+	}
+
+	NOTES :text :note
+	.dummy : { *(.dummy) } :text
+
+	_sdata = .;			/* Start of data section */
+	RODATA
+
+	/* writeable */
+	.data : {	/* Data */
+		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
+
+		INIT_TASK_DATA(THREAD_SIZE)
+		NOSAVE_DATA
+		CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
+		READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
+		DATA_DATA
+		CONSTRUCTORS
+	}
+	_gp = . + 0x8000;
+	.lit8 : {
+		*(.lit8)
+	}
+	.lit4 : {
+		*(.lit4)
+	}
+	/* We want the small data sections together, so single-instruction offsets
+	   can access them all, and initialized data all before uninitialized, so
+	   we can shorten the on-disk segment size.  */
+	.sdata : {
+		*(.sdata)
+	}
+	_edata =  .;			/* End of data section */
+
+	/* will be freed after init */
+	. = ALIGN(PAGE_SIZE);		/* Init code and data */
+	__init_begin = .;
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
+
+	. = ALIGN(4);
+	.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
+		__mips_machines_start = .;
+		*(.mips.machines.init)
+		__mips_machines_end = .;
+	}
+
+	/* .exit.text is discarded at runtime, not link time, to deal with
+	 * references from .rodata
+	 */
+	.exit.text : {
+		EXIT_TEXT
+	}
+	.exit.data : {
+		EXIT_DATA
+	}
+
+	PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
+	/*
+	 * Align to 64K in attempt to eliminate holes before the
+	 * .bss..swapper_pg_dir section at the start of .bss.  This
+	 * also satisfies PAGE_SIZE alignment as the largest page size
+	 * allowed is 64K.
+	 */
+	. = ALIGN(0x10000);
+	__init_end = .;
+	/* freed after init ends here */
+
+	/*
+	 * Force .bss to 64K alignment so that .bss..swapper_pg_dir
+	 * gets that alignment.	 .sbss should be empty, so there will be
+	 * no holes after __init_end. */
+	BSS_SECTION(0, 0x10000, 0)
+
+	_end = . ;
+
+	/* These mark the ABI of the kernel for debuggers.  */
+	.mdebug.abi32 : {
+		KEEP(*(.mdebug.abi32))
+	}
+	.mdebug.abi64 : {
+		KEEP(*(.mdebug.abi64))
+	}
+
+	/* This is the MIPS specific mdebug section.  */
+	.mdebug : {
+		*(.mdebug)
+	}
+
+	STABS_DEBUG
+	DWARF_DEBUG
+
+	/* These must appear regardless of  .  */
+	.gptab.sdata : {
+		*(.gptab.data)
+		*(.gptab.sdata)
+	}
+	.gptab.sbss : {
+		*(.gptab.bss)
+		*(.gptab.sbss)
+	}
+
+	/* Sections to be discarded */
+	DISCARDS
+	/DISCARD/ : {
+		/* ABI crap starts here */
+		*(.MIPS.options)
+		*(.options)
+		*(.pdr)
+		*(.reginfo)
+		*(.eh_frame)
+	}
+}
diff --git a/arch/mips/kernel/vpe-cmp.c b/arch/mips/kernel/vpe-cmp.c
new file mode 100644
index 000000000..9268ebc0f
--- /dev/null
+++ b/arch/mips/kernel/vpe-cmp.c
@@ -0,0 +1,180 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include <asm/vpe.h>
+
+static int major;
+
+void cleanup_tc(struct tc *tc)
+{
+
+}
+
+static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t len)
+{
+	struct vpe *vpe = get_vpe(aprp_cpu_index());
+	struct vpe_notifications *notifier;
+
+	list_for_each_entry(notifier, &vpe->notify, list)
+		notifier->stop(aprp_cpu_index());
+
+	release_progmem(vpe->load_addr);
+	vpe->state = VPE_STATE_UNUSED;
+
+	return len;
+}
+static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill);
+
+static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr,
+			 char *buf)
+{
+	struct vpe *vpe = get_vpe(aprp_cpu_index());
+
+	return sprintf(buf, "%d\n", vpe->ntcs);
+}
+
+static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t len)
+{
+	struct vpe *vpe = get_vpe(aprp_cpu_index());
+	unsigned long new;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &new);
+	if (ret < 0)
+		return ret;
+
+	/* APRP can only reserve one TC in a VPE and no more. */
+	if (new != 1)
+		return -EINVAL;
+
+	vpe->ntcs = new;
+
+	return len;
+}
+static DEVICE_ATTR_RW(ntcs);
+
+static struct attribute *vpe_attrs[] = {
+	&dev_attr_kill.attr,
+	&dev_attr_ntcs.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(vpe);
+
+static void vpe_device_release(struct device *cd)
+{
+	kfree(cd);
+}
+
+static struct class vpe_class = {
+	.name = "vpe",
+	.owner = THIS_MODULE,
+	.dev_release = vpe_device_release,
+	.dev_groups = vpe_groups,
+};
+
+static struct device vpe_device;
+
+int __init vpe_module_init(void)
+{
+	struct vpe *v = NULL;
+	struct tc *t;
+	int err;
+
+	if (!cpu_has_mipsmt) {
+		pr_warn("VPE loader: not a MIPS MT capable processor\n");
+		return -ENODEV;
+	}
+
+	if (num_possible_cpus() - aprp_cpu_index() < 1) {
+		pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n"
+			"Pass maxcpus=<n> argument as kernel argument\n");
+		return -ENODEV;
+	}
+
+	major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops);
+	if (major < 0) {
+		pr_warn("VPE loader: unable to register character device\n");
+		return major;
+	}
+
+	err = class_register(&vpe_class);
+	if (err) {
+		pr_err("vpe_class registration failed\n");
+		goto out_chrdev;
+	}
+
+	device_initialize(&vpe_device);
+	vpe_device.class	= &vpe_class,
+	vpe_device.parent	= NULL,
+	dev_set_name(&vpe_device, "vpe_sp");
+	vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR);
+	err = device_add(&vpe_device);
+	if (err) {
+		pr_err("Adding vpe_device failed\n");
+		goto out_class;
+	}
+
+	t = alloc_tc(aprp_cpu_index());
+	if (!t) {
+		pr_warn("VPE: unable to allocate TC\n");
+		err = -ENOMEM;
+		goto out_dev;
+	}
+
+	/* VPE */
+	v = alloc_vpe(aprp_cpu_index());
+	if (v == NULL) {
+		pr_warn("VPE: unable to allocate VPE\n");
+		kfree(t);
+		err = -ENOMEM;
+		goto out_dev;
+	}
+
+	v->ntcs = 1;
+
+	/* add the tc to the list of this vpe's tc's. */
+	list_add(&t->tc, &v->tc);
+
+	/* TC */
+	t->pvpe = v;	/* set the parent vpe */
+
+	return 0;
+
+out_dev:
+	device_del(&vpe_device);
+
+out_class:
+	class_unregister(&vpe_class);
+
+out_chrdev:
+	unregister_chrdev(major, VPE_MODULE_NAME);
+
+	return err;
+}
+
+void __exit vpe_module_exit(void)
+{
+	struct vpe *v, *n;
+
+	device_del(&vpe_device);
+	class_unregister(&vpe_class);
+	unregister_chrdev(major, VPE_MODULE_NAME);
+
+	/* No locking needed here */
+	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list)
+		if (v->state != VPE_STATE_UNUSED)
+			release_vpe(v);
+}
diff --git a/arch/mips/kernel/vpe-mt.c b/arch/mips/kernel/vpe-mt.c
new file mode 100644
index 000000000..2e003b11a
--- /dev/null
+++ b/arch/mips/kernel/vpe-mt.c
@@ -0,0 +1,521 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/mips_mt.h>
+#include <asm/vpe.h>
+
+static int major;
+
+/* The number of TCs and VPEs physically available on the core */
+static int hw_tcs, hw_vpes;
+
+/* We are prepared so configure and start the VPE... */
+int vpe_run(struct vpe *v)
+{
+	unsigned long flags, val, dmt_flag;
+	struct vpe_notifications *notifier;
+	unsigned int vpeflags;
+	struct tc *t;
+
+	/* check we are the Master VPE */
+	local_irq_save(flags);
+	val = read_c0_vpeconf0();
+	if (!(val & VPECONF0_MVP)) {
+		pr_warn("VPE loader: only Master VPE's are able to config MT\n");
+		local_irq_restore(flags);
+
+		return -1;
+	}
+
+	dmt_flag = dmt();
+	vpeflags = dvpe();
+
+	if (list_empty(&v->tc)) {
+		evpe(vpeflags);
+		emt(dmt_flag);
+		local_irq_restore(flags);
+
+		pr_warn("VPE loader: No TC's associated with VPE %d\n",
+			v->minor);
+
+		return -ENOEXEC;
+	}
+
+	t = list_first_entry(&v->tc, struct tc, tc);
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	settc(t->index);
+
+	/* should check it is halted, and not activated */
+	if ((read_tc_c0_tcstatus() & TCSTATUS_A) ||
+	   !(read_tc_c0_tchalt() & TCHALT_H)) {
+		evpe(vpeflags);
+		emt(dmt_flag);
+		local_irq_restore(flags);
+
+		pr_warn("VPE loader: TC %d is already active!\n",
+			t->index);
+
+		return -ENOEXEC;
+	}
+
+	/*
+	 * Write the address we want it to start running from in the TCPC
+	 * register.
+	 */
+	write_tc_c0_tcrestart((unsigned long)v->__start);
+	write_tc_c0_tccontext((unsigned long)0);
+
+	/*
+	 * Mark the TC as activated, not interrupt exempt and not dynamically
+	 * allocatable
+	 */
+	val = read_tc_c0_tcstatus();
+	val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
+	write_tc_c0_tcstatus(val);
+
+	write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
+
+	/*
+	 * The sde-kit passes 'memsize' to __start in $a3, so set something
+	 * here...  Or set $a3 to zero and define DFLT_STACK_SIZE and
+	 * DFLT_HEAP_SIZE when you compile your program
+	 */
+	mttgpr(6, v->ntcs);
+	mttgpr(7, physical_memsize);
+
+	/* set up VPE1 */
+	/*
+	 * bind the TC to VPE 1 as late as possible so we only have the final
+	 * VPE registers to set up, and so an EJTAG probe can trigger on it
+	 */
+	write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
+
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA));
+
+	back_to_back_c0_hazard();
+
+	/* Set up the XTC bit in vpeconf0 to point at our tc */
+	write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
+			      | (t->index << VPECONF0_XTC_SHIFT));
+
+	back_to_back_c0_hazard();
+
+	/* enable this VPE */
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+
+	/* clear out any left overs from a previous program */
+	write_vpe_c0_status(0);
+	write_vpe_c0_cause(0);
+
+	/* take system out of configuration state */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/*
+	 * SMVP kernels manage VPE enable independently, but uniprocessor
+	 * kernels need to turn it on, even if that wasn't the pre-dvpe() state.
+	 */
+#ifdef CONFIG_SMP
+	evpe(vpeflags);
+#else
+	evpe(EVPE_ENABLE);
+#endif
+	emt(dmt_flag);
+	local_irq_restore(flags);
+
+	list_for_each_entry(notifier, &v->notify, list)
+		notifier->start(VPE_MODULE_MINOR);
+
+	return 0;
+}
+
+void cleanup_tc(struct tc *tc)
+{
+	unsigned long flags;
+	unsigned int mtflags, vpflags;
+	int tmp;
+
+	local_irq_save(flags);
+	mtflags = dmt();
+	vpflags = dvpe();
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	settc(tc->index);
+	tmp = read_tc_c0_tcstatus();
+
+	/* mark not allocated and not dynamically allocatable */
+	tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+	tmp |= TCSTATUS_IXMT;	/* interrupt exempt */
+	write_tc_c0_tcstatus(tmp);
+
+	write_tc_c0_tchalt(TCHALT_H);
+	mips_ihb();
+
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+	evpe(vpflags);
+	emt(mtflags);
+	local_irq_restore(flags);
+}
+
+/* module wrapper entry points */
+/* give me a vpe */
+void *vpe_alloc(void)
+{
+	int i;
+	struct vpe *v;
+
+	/* find a vpe */
+	for (i = 1; i < MAX_VPES; i++) {
+		v = get_vpe(i);
+		if (v != NULL) {
+			v->state = VPE_STATE_INUSE;
+			return v;
+		}
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(vpe_alloc);
+
+/* start running from here */
+int vpe_start(void *vpe, unsigned long start)
+{
+	struct vpe *v = vpe;
+
+	v->__start = start;
+	return vpe_run(v);
+}
+EXPORT_SYMBOL(vpe_start);
+
+/* halt it for now */
+int vpe_stop(void *vpe)
+{
+	struct vpe *v = vpe;
+	struct tc *t;
+	unsigned int evpe_flags;
+
+	evpe_flags = dvpe();
+
+	t = list_entry(v->tc.next, struct tc, tc);
+	if (t != NULL) {
+		settc(t->index);
+		write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+	}
+
+	evpe(evpe_flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(vpe_stop);
+
+/* I've done with it thank you */
+int vpe_free(void *vpe)
+{
+	struct vpe *v = vpe;
+	struct tc *t;
+	unsigned int evpe_flags;
+
+	t = list_entry(v->tc.next, struct tc, tc);
+	if (t == NULL)
+		return -ENOEXEC;
+
+	evpe_flags = dvpe();
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	settc(t->index);
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+
+	/* halt the TC */
+	write_tc_c0_tchalt(TCHALT_H);
+	mips_ihb();
+
+	/* mark the TC unallocated */
+	write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
+
+	v->state = VPE_STATE_UNUSED;
+
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+	evpe(evpe_flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(vpe_free);
+
+static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t len)
+{
+	struct vpe *vpe = get_vpe(aprp_cpu_index());
+	struct vpe_notifications *notifier;
+
+	list_for_each_entry(notifier, &vpe->notify, list)
+		notifier->stop(aprp_cpu_index());
+
+	release_progmem(vpe->load_addr);
+	cleanup_tc(get_tc(aprp_cpu_index()));
+	vpe_stop(vpe);
+	vpe_free(vpe);
+
+	return len;
+}
+static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill);
+
+static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr,
+			 char *buf)
+{
+	struct vpe *vpe = get_vpe(aprp_cpu_index());
+
+	return sprintf(buf, "%d\n", vpe->ntcs);
+}
+
+static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t len)
+{
+	struct vpe *vpe = get_vpe(aprp_cpu_index());
+	unsigned long new;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &new);
+	if (ret < 0)
+		return ret;
+
+	if (new == 0 || new > (hw_tcs - aprp_cpu_index()))
+		return -EINVAL;
+
+	vpe->ntcs = new;
+
+	return len;
+}
+static DEVICE_ATTR_RW(ntcs);
+
+static struct attribute *vpe_attrs[] = {
+	&dev_attr_kill.attr,
+	&dev_attr_ntcs.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(vpe);
+
+static void vpe_device_release(struct device *cd)
+{
+	kfree(cd);
+}
+
+static struct class vpe_class = {
+	.name = "vpe",
+	.owner = THIS_MODULE,
+	.dev_release = vpe_device_release,
+	.dev_groups = vpe_groups,
+};
+
+static struct device vpe_device;
+
+int __init vpe_module_init(void)
+{
+	unsigned int mtflags, vpflags;
+	unsigned long flags, val;
+	struct vpe *v = NULL;
+	struct tc *t;
+	int tc, err;
+
+	if (!cpu_has_mipsmt) {
+		pr_warn("VPE loader: not a MIPS MT capable processor\n");
+		return -ENODEV;
+	}
+
+	if (vpelimit == 0) {
+		pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n"
+			"Pass maxvpes=<n> argument as kernel argument\n");
+
+		return -ENODEV;
+	}
+
+	if (aprp_cpu_index() == 0) {
+		pr_warn("No TCs reserved for AP/SP, not initialize VPE loader\n"
+			"Pass maxtcs=<n> argument as kernel argument\n");
+
+		return -ENODEV;
+	}
+
+	major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops);
+	if (major < 0) {
+		pr_warn("VPE loader: unable to register character device\n");
+		return major;
+	}
+
+	err = class_register(&vpe_class);
+	if (err) {
+		pr_err("vpe_class registration failed\n");
+		goto out_chrdev;
+	}
+
+	device_initialize(&vpe_device);
+	vpe_device.class	= &vpe_class,
+	vpe_device.parent	= NULL,
+	dev_set_name(&vpe_device, "vpe1");
+	vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR);
+	err = device_add(&vpe_device);
+	if (err) {
+		pr_err("Adding vpe_device failed\n");
+		goto out_class;
+	}
+
+	local_irq_save(flags);
+	mtflags = dmt();
+	vpflags = dvpe();
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	val = read_c0_mvpconf0();
+	hw_tcs = (val & MVPCONF0_PTC) + 1;
+	hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+
+	for (tc = aprp_cpu_index(); tc < hw_tcs; tc++) {
+		/*
+		 * Must re-enable multithreading temporarily or in case we
+		 * reschedule send IPIs or similar we might hang.
+		 */
+		clear_c0_mvpcontrol(MVPCONTROL_VPC);
+		evpe(vpflags);
+		emt(mtflags);
+		local_irq_restore(flags);
+		t = alloc_tc(tc);
+		if (!t) {
+			err = -ENOMEM;
+			goto out_dev;
+		}
+
+		local_irq_save(flags);
+		mtflags = dmt();
+		vpflags = dvpe();
+		set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+		/* VPE's */
+		if (tc < hw_tcs) {
+			settc(tc);
+
+			v = alloc_vpe(tc);
+			if (v == NULL) {
+				pr_warn("VPE: unable to allocate VPE\n");
+				goto out_reenable;
+			}
+
+			v->ntcs = hw_tcs - aprp_cpu_index();
+
+			/* add the tc to the list of this vpe's tc's. */
+			list_add(&t->tc, &v->tc);
+
+			/* deactivate all but vpe0 */
+			if (tc >= aprp_cpu_index()) {
+				unsigned long tmp = read_vpe_c0_vpeconf0();
+
+				tmp &= ~VPECONF0_VPA;
+
+				/* master VPE */
+				tmp |= VPECONF0_MVP;
+				write_vpe_c0_vpeconf0(tmp);
+			}
+
+			/* disable multi-threading with TC's */
+			write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() &
+						~VPECONTROL_TE);
+
+			if (tc >= vpelimit) {
+				/*
+				 * Set config to be the same as vpe0,
+				 * particularly kseg0 coherency alg
+				 */
+				write_vpe_c0_config(read_c0_config());
+			}
+		}
+
+		/* TC's */
+		t->pvpe = v;	/* set the parent vpe */
+
+		if (tc >= aprp_cpu_index()) {
+			unsigned long tmp;
+
+			settc(tc);
+
+			/*
+			 * A TC that is bound to any other VPE gets bound to
+			 * VPE0, ideally I'd like to make it homeless but it
+			 * doesn't appear to let me bind a TC to a non-existent
+			 * VPE. Which is perfectly reasonable.
+			 *
+			 * The (un)bound state is visible to an EJTAG probe so
+			 * may notify GDB...
+			 */
+			tmp = read_tc_c0_tcbind();
+			if (tmp & TCBIND_CURVPE) {
+				/* tc is bound >vpe0 */
+				write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE);
+
+				t->pvpe = get_vpe(0);	/* set the parent vpe */
+			}
+
+			/* halt the TC */
+			write_tc_c0_tchalt(TCHALT_H);
+			mips_ihb();
+
+			tmp = read_tc_c0_tcstatus();
+
+			/* mark not activated and not dynamically allocatable */
+			tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+			tmp |= TCSTATUS_IXMT;	/* interrupt exempt */
+			write_tc_c0_tcstatus(tmp);
+		}
+	}
+
+out_reenable:
+	/* release config state */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	evpe(vpflags);
+	emt(mtflags);
+	local_irq_restore(flags);
+
+	return 0;
+
+out_dev:
+	device_del(&vpe_device);
+
+out_class:
+	class_unregister(&vpe_class);
+
+out_chrdev:
+	unregister_chrdev(major, VPE_MODULE_NAME);
+
+	return err;
+}
+
+void __exit vpe_module_exit(void)
+{
+	struct vpe *v, *n;
+
+	device_del(&vpe_device);
+	class_unregister(&vpe_class);
+	unregister_chrdev(major, VPE_MODULE_NAME);
+
+	/* No locking needed here */
+	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
+		if (v->state != VPE_STATE_UNUSED)
+			release_vpe(v);
+	}
+}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
new file mode 100644
index 000000000..11da31456
--- /dev/null
+++ b/arch/mips/kernel/vpe.c
@@ -0,0 +1,928 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ *
+ * VPE spport module for loading a MIPS SP program into VPE1. The SP
+ * environment is rather simple since there are no TLBs. It needs
+ * to be relocatable (or partiall linked). Initialize your stack in
+ * the startup-code. The loader looks for the symbol __start and sets
+ * up the execution to resume from there. To load and run, simply do
+ * a cat SP 'binary' to the /dev/vpe1 device.
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/elf.h>
+#include <linux/seq_file.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/bootmem.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <linux/atomic.h>
+#include <asm/mips_mt.h>
+#include <asm/processor.h>
+#include <asm/vpe.h>
+
+#ifndef ARCH_SHF_SMALL
+#define ARCH_SHF_SMALL 0
+#endif
+
+/* If this is set, the section belongs in the init part of the module */
+#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
+
+struct vpe_control vpecontrol = {
+	.vpe_list_lock	= __SPIN_LOCK_UNLOCKED(vpe_list_lock),
+	.vpe_list	= LIST_HEAD_INIT(vpecontrol.vpe_list),
+	.tc_list_lock	= __SPIN_LOCK_UNLOCKED(tc_list_lock),
+	.tc_list	= LIST_HEAD_INIT(vpecontrol.tc_list)
+};
+
+/* get the vpe associated with this minor */
+struct vpe *get_vpe(int minor)
+{
+	struct vpe *res, *v;
+
+	if (!cpu_has_mipsmt)
+		return NULL;
+
+	res = NULL;
+	spin_lock(&vpecontrol.vpe_list_lock);
+	list_for_each_entry(v, &vpecontrol.vpe_list, list) {
+		if (v->minor == VPE_MODULE_MINOR) {
+			res = v;
+			break;
+		}
+	}
+	spin_unlock(&vpecontrol.vpe_list_lock);
+
+	return res;
+}
+
+/* get the vpe associated with this minor */
+struct tc *get_tc(int index)
+{
+	struct tc *res, *t;
+
+	res = NULL;
+	spin_lock(&vpecontrol.tc_list_lock);
+	list_for_each_entry(t, &vpecontrol.tc_list, list) {
+		if (t->index == index) {
+			res = t;
+			break;
+		}
+	}
+	spin_unlock(&vpecontrol.tc_list_lock);
+
+	return res;
+}
+
+/* allocate a vpe and associate it with this minor (or index) */
+struct vpe *alloc_vpe(int minor)
+{
+	struct vpe *v;
+
+	v = kzalloc(sizeof(struct vpe), GFP_KERNEL);
+	if (v == NULL)
+		goto out;
+
+	INIT_LIST_HEAD(&v->tc);
+	spin_lock(&vpecontrol.vpe_list_lock);
+	list_add_tail(&v->list, &vpecontrol.vpe_list);
+	spin_unlock(&vpecontrol.vpe_list_lock);
+
+	INIT_LIST_HEAD(&v->notify);
+	v->minor = VPE_MODULE_MINOR;
+
+out:
+	return v;
+}
+
+/* allocate a tc. At startup only tc0 is running, all other can be halted. */
+struct tc *alloc_tc(int index)
+{
+	struct tc *tc;
+
+	tc = kzalloc(sizeof(struct tc), GFP_KERNEL);
+	if (tc == NULL)
+		goto out;
+
+	INIT_LIST_HEAD(&tc->tc);
+	tc->index = index;
+
+	spin_lock(&vpecontrol.tc_list_lock);
+	list_add_tail(&tc->list, &vpecontrol.tc_list);
+	spin_unlock(&vpecontrol.tc_list_lock);
+
+out:
+	return tc;
+}
+
+/* clean up and free everything */
+void release_vpe(struct vpe *v)
+{
+	list_del(&v->list);
+	if (v->load_addr)
+		release_progmem(v);
+	kfree(v);
+}
+
+/* Find some VPE program space */
+void *alloc_progmem(unsigned long len)
+{
+	void *addr;
+
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+	/*
+	 * This means you must tell Linux to use less memory than you
+	 * physically have, for example by passing a mem= boot argument.
+	 */
+	addr = pfn_to_kaddr(max_low_pfn);
+	memset(addr, 0, len);
+#else
+	/* simple grab some mem for now */
+	addr = kzalloc(len, GFP_KERNEL);
+#endif
+
+	return addr;
+}
+
+void release_progmem(void *ptr)
+{
+#ifndef CONFIG_MIPS_VPE_LOADER_TOM
+	kfree(ptr);
+#endif
+}
+
+/* Update size with this section: return offset. */
+static long get_offset(unsigned long *size, Elf_Shdr *sechdr)
+{
+	long ret;
+
+	ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
+	*size = ret + sechdr->sh_size;
+	return ret;
+}
+
+/* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
+   might -- code, read-only data, read-write data, small data.	Tally
+   sizes, and place the offsets into sh_entsize fields: high bit means it
+   belongs in init. */
+static void layout_sections(struct module *mod, const Elf_Ehdr *hdr,
+			    Elf_Shdr *sechdrs, const char *secstrings)
+{
+	static unsigned long const masks[][2] = {
+		/* NOTE: all executable code must be the first section
+		 * in this array; otherwise modify the text_size
+		 * finder in the two loops below */
+		{SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
+		{SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
+		{SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
+		{ARCH_SHF_SMALL | SHF_ALLOC, 0}
+	};
+	unsigned int m, i;
+
+	for (i = 0; i < hdr->e_shnum; i++)
+		sechdrs[i].sh_entsize = ~0UL;
+
+	for (m = 0; m < ARRAY_SIZE(masks); ++m) {
+		for (i = 0; i < hdr->e_shnum; ++i) {
+			Elf_Shdr *s = &sechdrs[i];
+
+			if ((s->sh_flags & masks[m][0]) != masks[m][0]
+			    || (s->sh_flags & masks[m][1])
+			    || s->sh_entsize != ~0UL)
+				continue;
+			s->sh_entsize =
+				get_offset((unsigned long *)&mod->core_size, s);
+		}
+
+		if (m == 0)
+			mod->core_text_size = mod->core_size;
+
+	}
+}
+
+/* from module-elf32.c, but subverted a little */
+
+struct mips_hi16 {
+	struct mips_hi16 *next;
+	Elf32_Addr *addr;
+	Elf32_Addr value;
+};
+
+static struct mips_hi16 *mips_hi16_list;
+static unsigned int gp_offs, gp_addr;
+
+static int apply_r_mips_none(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	return 0;
+}
+
+static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
+				Elf32_Addr v)
+{
+	int rel;
+
+	if (!(*location & 0xffff)) {
+		rel = (int)v - gp_addr;
+	} else {
+		/* .sbss + gp(relative) + offset */
+		/* kludge! */
+		rel =  (int)(short)((int)v + gp_offs +
+				    (int)(short)(*location & 0xffff) - gp_addr);
+	}
+
+	if ((rel > 32768) || (rel < -32768)) {
+		pr_debug("VPE loader: apply_r_mips_gprel16: relative address 0x%x out of range of gp register\n",
+			 rel);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & 0xffff0000) | (rel & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_pc16(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	int rel;
+	rel = (((unsigned int)v - (unsigned int)location));
+	rel >>= 2; /* because the offset is in _instructions_ not bytes. */
+	rel -= 1;  /* and one instruction less due to the branch delay slot. */
+
+	if ((rel > 32768) || (rel < -32768)) {
+		pr_debug("VPE loader: apply_r_mips_pc16: relative address out of range 0x%x\n",
+			 rel);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & 0xffff0000) | (rel & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_32(struct module *me, uint32_t *location,
+			   Elf32_Addr v)
+{
+	*location += v;
+
+	return 0;
+}
+
+static int apply_r_mips_26(struct module *me, uint32_t *location,
+			   Elf32_Addr v)
+{
+	if (v % 4) {
+		pr_debug("VPE loader: apply_r_mips_26: unaligned relocation\n");
+		return -ENOEXEC;
+	}
+
+/*
+ * Not desperately convinced this is a good check of an overflow condition
+ * anyway. But it gets in the way of handling undefined weak symbols which
+ * we want to set to zero.
+ * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+ * printk(KERN_ERR
+ * "module %s: relocation overflow\n",
+ * me->name);
+ * return -ENOEXEC;
+ * }
+ */
+
+	*location = (*location & ~0x03ffffff) |
+		((*location + (v >> 2)) & 0x03ffffff);
+	return 0;
+}
+
+static int apply_r_mips_hi16(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	struct mips_hi16 *n;
+
+	/*
+	 * We cannot relocate this one now because we don't know the value of
+	 * the carry we need to add.  Save the information, and let LO16 do the
+	 * actual relocation.
+	 */
+	n = kmalloc(sizeof(*n), GFP_KERNEL);
+	if (!n)
+		return -ENOMEM;
+
+	n->addr = location;
+	n->value = v;
+	n->next = mips_hi16_list;
+	mips_hi16_list = n;
+
+	return 0;
+}
+
+static int apply_r_mips_lo16(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	unsigned long insnlo = *location;
+	Elf32_Addr val, vallo;
+	struct mips_hi16 *l, *next;
+
+	/* Sign extend the addend we extract from the lo insn.	*/
+	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
+
+	if (mips_hi16_list != NULL) {
+
+		l = mips_hi16_list;
+		while (l != NULL) {
+			unsigned long insn;
+
+			/*
+			 * The value for the HI16 had best be the same.
+			 */
+			if (v != l->value) {
+				pr_debug("VPE loader: apply_r_mips_lo16/hi16: inconsistent value information\n");
+				goto out_free;
+			}
+
+			/*
+			 * Do the HI16 relocation.  Note that we actually don't
+			 * need to know anything about the LO16 itself, except
+			 * where to find the low 16 bits of the addend needed
+			 * by the LO16.
+			 */
+			insn = *l->addr;
+			val = ((insn & 0xffff) << 16) + vallo;
+			val += v;
+
+			/*
+			 * Account for the sign extension that will happen in
+			 * the low bits.
+			 */
+			val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
+
+			insn = (insn & ~0xffff) | val;
+			*l->addr = insn;
+
+			next = l->next;
+			kfree(l);
+			l = next;
+		}
+
+		mips_hi16_list = NULL;
+	}
+
+	/*
+	 * Ok, we're done with the HI16 relocs.	 Now deal with the LO16.
+	 */
+	val = v + vallo;
+	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
+	*location = insnlo;
+
+	return 0;
+
+out_free:
+	while (l != NULL) {
+		next = l->next;
+		kfree(l);
+		l = next;
+	}
+	mips_hi16_list = NULL;
+
+	return -ENOEXEC;
+}
+
+static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
+				Elf32_Addr v) = {
+	[R_MIPS_NONE]	= apply_r_mips_none,
+	[R_MIPS_32]	= apply_r_mips_32,
+	[R_MIPS_26]	= apply_r_mips_26,
+	[R_MIPS_HI16]	= apply_r_mips_hi16,
+	[R_MIPS_LO16]	= apply_r_mips_lo16,
+	[R_MIPS_GPREL16] = apply_r_mips_gprel16,
+	[R_MIPS_PC16] = apply_r_mips_pc16
+};
+
+static char *rstrs[] = {
+	[R_MIPS_NONE]	= "MIPS_NONE",
+	[R_MIPS_32]	= "MIPS_32",
+	[R_MIPS_26]	= "MIPS_26",
+	[R_MIPS_HI16]	= "MIPS_HI16",
+	[R_MIPS_LO16]	= "MIPS_LO16",
+	[R_MIPS_GPREL16] = "MIPS_GPREL16",
+	[R_MIPS_PC16] = "MIPS_PC16"
+};
+
+static int apply_relocations(Elf32_Shdr *sechdrs,
+		      const char *strtab,
+		      unsigned int symindex,
+		      unsigned int relsec,
+		      struct module *me)
+{
+	Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	uint32_t *location;
+	unsigned int i;
+	Elf32_Addr v;
+	int res;
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		Elf32_Word r_info = rel[i].r_info;
+
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to */
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(r_info);
+
+		if (!sym->st_value) {
+			pr_debug("%s: undefined weak symbol %s\n",
+				 me->name, strtab + sym->st_name);
+			/* just print the warning, dont barf */
+		}
+
+		v = sym->st_value;
+
+		res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
+		if (res) {
+			char *r = rstrs[ELF32_R_TYPE(r_info)];
+			pr_warn("VPE loader: .text+0x%x relocation type %s for symbol \"%s\" failed\n",
+				rel[i].r_offset, r ? r : "UNKNOWN",
+				strtab + sym->st_name);
+			return res;
+		}
+	}
+
+	return 0;
+}
+
+static inline void save_gp_address(unsigned int secbase, unsigned int rel)
+{
+	gp_addr = secbase + rel;
+	gp_offs = gp_addr - (secbase & 0xffff0000);
+}
+/* end module-elf32.c */
+
+/* Change all symbols so that sh_value encodes the pointer directly. */
+static void simplify_symbols(Elf_Shdr *sechdrs,
+			    unsigned int symindex,
+			    const char *strtab,
+			    const char *secstrings,
+			    unsigned int nsecs, struct module *mod)
+{
+	Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+	unsigned long secbase, bssbase = 0;
+	unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+	int size;
+
+	/* find the .bss section for COMMON symbols */
+	for (i = 0; i < nsecs; i++) {
+		if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) {
+			bssbase = sechdrs[i].sh_addr;
+			break;
+		}
+	}
+
+	for (i = 1; i < n; i++) {
+		switch (sym[i].st_shndx) {
+		case SHN_COMMON:
+			/* Allocate space for the symbol in the .bss section.
+			   st_value is currently size.
+			   We want it to have the address of the symbol. */
+
+			size = sym[i].st_value;
+			sym[i].st_value = bssbase;
+
+			bssbase += size;
+			break;
+
+		case SHN_ABS:
+			/* Don't need to do anything */
+			break;
+
+		case SHN_UNDEF:
+			/* ret = -ENOENT; */
+			break;
+
+		case SHN_MIPS_SCOMMON:
+			pr_debug("simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n",
+				 strtab + sym[i].st_name, sym[i].st_shndx);
+			/* .sbss section */
+			break;
+
+		default:
+			secbase = sechdrs[sym[i].st_shndx].sh_addr;
+
+			if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0)
+				save_gp_address(secbase, sym[i].st_value);
+
+			sym[i].st_value += secbase;
+			break;
+		}
+	}
+}
+
+#ifdef DEBUG_ELFLOADER
+static void dump_elfsymbols(Elf_Shdr *sechdrs, unsigned int symindex,
+			    const char *strtab, struct module *mod)
+{
+	Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+	unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+	pr_debug("dump_elfsymbols: n %d\n", n);
+	for (i = 1; i < n; i++) {
+		pr_debug(" i %d name <%s> 0x%x\n", i, strtab + sym[i].st_name,
+			 sym[i].st_value);
+	}
+}
+#endif
+
+static int find_vpe_symbols(struct vpe *v, Elf_Shdr *sechdrs,
+				      unsigned int symindex, const char *strtab,
+				      struct module *mod)
+{
+	Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+	unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+	for (i = 1; i < n; i++) {
+		if (strcmp(strtab + sym[i].st_name, "__start") == 0)
+			v->__start = sym[i].st_value;
+
+		if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0)
+			v->shared_ptr = (void *)sym[i].st_value;
+	}
+
+	if ((v->__start == 0) || (v->shared_ptr == NULL))
+		return -1;
+
+	return 0;
+}
+
+/*
+ * Allocates a VPE with some program code space(the load address), copies the
+ * contents of the program (p)buffer performing relocatations/etc, free's it
+ * when finished.
+ */
+static int vpe_elfload(struct vpe *v)
+{
+	Elf_Ehdr *hdr;
+	Elf_Shdr *sechdrs;
+	long err = 0;
+	char *secstrings, *strtab = NULL;
+	unsigned int len, i, symindex = 0, strindex = 0, relocate = 0;
+	struct module mod; /* so we can re-use the relocations code */
+
+	memset(&mod, 0, sizeof(struct module));
+	strcpy(mod.name, "VPE loader");
+
+	hdr = (Elf_Ehdr *) v->pbuffer;
+	len = v->plen;
+
+	/* Sanity checks against insmoding binaries or wrong arch,
+	   weird elf version */
+	if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
+	    || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
+	    || !elf_check_arch(hdr)
+	    || hdr->e_shentsize != sizeof(*sechdrs)) {
+		pr_warn("VPE loader: program wrong arch or weird elf version\n");
+
+		return -ENOEXEC;
+	}
+
+	if (hdr->e_type == ET_REL)
+		relocate = 1;
+
+	if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
+		pr_err("VPE loader: program length %u truncated\n", len);
+
+		return -ENOEXEC;
+	}
+
+	/* Convenience variables */
+	sechdrs = (void *)hdr + hdr->e_shoff;
+	secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+	sechdrs[0].sh_addr = 0;
+
+	/* And these should exist, but gcc whinges if we don't init them */
+	symindex = strindex = 0;
+
+	if (relocate) {
+		for (i = 1; i < hdr->e_shnum; i++) {
+			if ((sechdrs[i].sh_type != SHT_NOBITS) &&
+			    (len < sechdrs[i].sh_offset + sechdrs[i].sh_size)) {
+				pr_err("VPE program length %u truncated\n",
+				       len);
+				return -ENOEXEC;
+			}
+
+			/* Mark all sections sh_addr with their address in the
+			   temporary image. */
+			sechdrs[i].sh_addr = (size_t) hdr +
+				sechdrs[i].sh_offset;
+
+			/* Internal symbols and strings. */
+			if (sechdrs[i].sh_type == SHT_SYMTAB) {
+				symindex = i;
+				strindex = sechdrs[i].sh_link;
+				strtab = (char *)hdr +
+					sechdrs[strindex].sh_offset;
+			}
+		}
+		layout_sections(&mod, hdr, sechdrs, secstrings);
+	}
+
+	v->load_addr = alloc_progmem(mod.core_size);
+	if (!v->load_addr)
+		return -ENOMEM;
+
+	pr_info("VPE loader: loading to %p\n", v->load_addr);
+
+	if (relocate) {
+		for (i = 0; i < hdr->e_shnum; i++) {
+			void *dest;
+
+			if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+				continue;
+
+			dest = v->load_addr + sechdrs[i].sh_entsize;
+
+			if (sechdrs[i].sh_type != SHT_NOBITS)
+				memcpy(dest, (void *)sechdrs[i].sh_addr,
+				       sechdrs[i].sh_size);
+			/* Update sh_addr to point to copy in image. */
+			sechdrs[i].sh_addr = (unsigned long)dest;
+
+			pr_debug(" section sh_name %s sh_addr 0x%x\n",
+				 secstrings + sechdrs[i].sh_name,
+				 sechdrs[i].sh_addr);
+		}
+
+		/* Fix up syms, so that st_value is a pointer to location. */
+		simplify_symbols(sechdrs, symindex, strtab, secstrings,
+				 hdr->e_shnum, &mod);
+
+		/* Now do relocations. */
+		for (i = 1; i < hdr->e_shnum; i++) {
+			const char *strtab = (char *)sechdrs[strindex].sh_addr;
+			unsigned int info = sechdrs[i].sh_info;
+
+			/* Not a valid relocation section? */
+			if (info >= hdr->e_shnum)
+				continue;
+
+			/* Don't bother with non-allocated sections */
+			if (!(sechdrs[info].sh_flags & SHF_ALLOC))
+				continue;
+
+			if (sechdrs[i].sh_type == SHT_REL)
+				err = apply_relocations(sechdrs, strtab,
+							symindex, i, &mod);
+			else if (sechdrs[i].sh_type == SHT_RELA)
+				err = apply_relocate_add(sechdrs, strtab,
+							 symindex, i, &mod);
+			if (err < 0)
+				return err;
+
+		}
+	} else {
+		struct elf_phdr *phdr = (struct elf_phdr *)
+						((char *)hdr + hdr->e_phoff);
+
+		for (i = 0; i < hdr->e_phnum; i++) {
+			if (phdr->p_type == PT_LOAD) {
+				memcpy((void *)phdr->p_paddr,
+				       (char *)hdr + phdr->p_offset,
+				       phdr->p_filesz);
+				memset((void *)phdr->p_paddr + phdr->p_filesz,
+				       0, phdr->p_memsz - phdr->p_filesz);
+		    }
+		    phdr++;
+		}
+
+		for (i = 0; i < hdr->e_shnum; i++) {
+			/* Internal symbols and strings. */
+			if (sechdrs[i].sh_type == SHT_SYMTAB) {
+				symindex = i;
+				strindex = sechdrs[i].sh_link;
+				strtab = (char *)hdr +
+					sechdrs[strindex].sh_offset;
+
+				/*
+				 * mark symtab's address for when we try
+				 * to find the magic symbols
+				 */
+				sechdrs[i].sh_addr = (size_t) hdr +
+					sechdrs[i].sh_offset;
+			}
+		}
+	}
+
+	/* make sure it's physically written out */
+	flush_icache_range((unsigned long)v->load_addr,
+			   (unsigned long)v->load_addr + v->len);
+
+	if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
+		if (v->__start == 0) {
+			pr_warn("VPE loader: program does not contain a __start symbol\n");
+			return -ENOEXEC;
+		}
+
+		if (v->shared_ptr == NULL)
+			pr_warn("VPE loader: program does not contain vpe_shared symbol.\n"
+				" Unable to use AMVP (AP/SP) facilities.\n");
+	}
+
+	pr_info(" elf loaded\n");
+	return 0;
+}
+
+static int getcwd(char *buff, int size)
+{
+	mm_segment_t old_fs;
+	int ret;
+
+	old_fs = get_fs();
+	set_fs(KERNEL_DS);
+
+	ret = sys_getcwd(buff, size);
+
+	set_fs(old_fs);
+
+	return ret;
+}
+
+/* checks VPE is unused and gets ready to load program	*/
+static int vpe_open(struct inode *inode, struct file *filp)
+{
+	enum vpe_state state;
+	struct vpe_notifications *notifier;
+	struct vpe *v;
+	int ret;
+
+	if (VPE_MODULE_MINOR != iminor(inode)) {
+		/* assume only 1 device at the moment. */
+		pr_warn("VPE loader: only vpe1 is supported\n");
+
+		return -ENODEV;
+	}
+
+	v = get_vpe(aprp_cpu_index());
+	if (v == NULL) {
+		pr_warn("VPE loader: unable to get vpe\n");
+
+		return -ENODEV;
+	}
+
+	state = xchg(&v->state, VPE_STATE_INUSE);
+	if (state != VPE_STATE_UNUSED) {
+		pr_debug("VPE loader: tc in use dumping regs\n");
+
+		list_for_each_entry(notifier, &v->notify, list)
+			notifier->stop(aprp_cpu_index());
+
+		release_progmem(v->load_addr);
+		cleanup_tc(get_tc(aprp_cpu_index()));
+	}
+
+	/* this of-course trashes what was there before... */
+	v->pbuffer = vmalloc(P_SIZE);
+	if (!v->pbuffer) {
+		pr_warn("VPE loader: unable to allocate memory\n");
+		return -ENOMEM;
+	}
+	v->plen = P_SIZE;
+	v->load_addr = NULL;
+	v->len = 0;
+
+	v->cwd[0] = 0;
+	ret = getcwd(v->cwd, VPE_PATH_MAX);
+	if (ret < 0)
+		pr_warn("VPE loader: open, getcwd returned %d\n", ret);
+
+	v->shared_ptr = NULL;
+	v->__start = 0;
+
+	return 0;
+}
+
+static int vpe_release(struct inode *inode, struct file *filp)
+{
+	struct vpe *v;
+	Elf_Ehdr *hdr;
+	int ret = 0;
+
+	v = get_vpe(aprp_cpu_index());
+	if (v == NULL)
+		return -ENODEV;
+
+	hdr = (Elf_Ehdr *) v->pbuffer;
+	if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) {
+		if ((vpe_elfload(v) >= 0) && vpe_run) {
+			vpe_run(v);
+		} else {
+			pr_warn("VPE loader: ELF load failed.\n");
+			ret = -ENOEXEC;
+		}
+	} else {
+		pr_warn("VPE loader: only elf files are supported\n");
+		ret = -ENOEXEC;
+	}
+
+	/* It's good to be able to run the SP and if it chokes have a look at
+	   the /dev/rt?. But if we reset the pointer to the shared struct we
+	   lose what has happened. So perhaps if garbage is sent to the vpe
+	   device, use it as a trigger for the reset. Hopefully a nice
+	   executable will be along shortly. */
+	if (ret < 0)
+		v->shared_ptr = NULL;
+
+	vfree(v->pbuffer);
+	v->plen = 0;
+
+	return ret;
+}
+
+static ssize_t vpe_write(struct file *file, const char __user *buffer,
+			 size_t count, loff_t *ppos)
+{
+	size_t ret = count;
+	struct vpe *v;
+
+	if (iminor(file_inode(file)) != VPE_MODULE_MINOR)
+		return -ENODEV;
+
+	v = get_vpe(aprp_cpu_index());
+
+	if (v == NULL)
+		return -ENODEV;
+
+	if ((count + v->len) > v->plen) {
+		pr_warn("VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
+		return -ENOMEM;
+	}
+
+	count -= copy_from_user(v->pbuffer + v->len, buffer, count);
+	if (!count)
+		return -EFAULT;
+
+	v->len += count;
+	return ret;
+}
+
+const struct file_operations vpe_fops = {
+	.owner = THIS_MODULE,
+	.open = vpe_open,
+	.release = vpe_release,
+	.write = vpe_write,
+	.llseek = noop_llseek,
+};
+
+void *vpe_get_shared(int index)
+{
+	struct vpe *v = get_vpe(index);
+
+	if (v == NULL)
+		return NULL;
+
+	return v->shared_ptr;
+}
+EXPORT_SYMBOL(vpe_get_shared);
+
+int vpe_notify(int index, struct vpe_notifications *notify)
+{
+	struct vpe *v = get_vpe(index);
+
+	if (v == NULL)
+		return -1;
+
+	list_add(&notify->list, &v->notify);
+	return 0;
+}
+EXPORT_SYMBOL(vpe_notify);
+
+char *vpe_getcwd(int index)
+{
+	struct vpe *v = get_vpe(index);
+
+	if (v == NULL)
+		return NULL;
+
+	return v->cwd;
+}
+EXPORT_SYMBOL(vpe_getcwd);
+
+module_init(vpe_module_init);
+module_exit(vpe_module_exit);
+MODULE_DESCRIPTION("MIPS VPE Loader");
+MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/watch.c b/arch/mips/kernel/watch.c
new file mode 100644
index 000000000..2a03abb5b
--- /dev/null
+++ b/arch/mips/kernel/watch.c
@@ -0,0 +1,196 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 David Daney
+ */
+
+#include <linux/sched.h>
+
+#include <asm/processor.h>
+#include <asm/watch.h>
+
+/*
+ * Install the watch registers for the current thread.	A maximum of
+ * four registers are installed although the machine may have more.
+ */
+void mips_install_watch_registers(void)
+{
+	struct mips3264_watch_reg_state *watches =
+		&current->thread.watch.mips3264;
+	switch (current_cpu_data.watch_reg_use_cnt) {
+	default:
+		BUG();
+	case 4:
+		write_c0_watchlo3(watches->watchlo[3]);
+		/* Write 1 to the I, R, and W bits to clear them, and
+		   1 to G so all ASIDs are trapped. */
+		write_c0_watchhi3(0x40000007 | watches->watchhi[3]);
+	case 3:
+		write_c0_watchlo2(watches->watchlo[2]);
+		write_c0_watchhi2(0x40000007 | watches->watchhi[2]);
+	case 2:
+		write_c0_watchlo1(watches->watchlo[1]);
+		write_c0_watchhi1(0x40000007 | watches->watchhi[1]);
+	case 1:
+		write_c0_watchlo0(watches->watchlo[0]);
+		write_c0_watchhi0(0x40000007 | watches->watchhi[0]);
+	}
+}
+
+/*
+ * Read back the watchhi registers so the user space debugger has
+ * access to the I, R, and W bits.  A maximum of four registers are
+ * read although the machine may have more.
+ */
+void mips_read_watch_registers(void)
+{
+	struct mips3264_watch_reg_state *watches =
+		&current->thread.watch.mips3264;
+	switch (current_cpu_data.watch_reg_use_cnt) {
+	default:
+		BUG();
+	case 4:
+		watches->watchhi[3] = (read_c0_watchhi3() & 0x0fff);
+	case 3:
+		watches->watchhi[2] = (read_c0_watchhi2() & 0x0fff);
+	case 2:
+		watches->watchhi[1] = (read_c0_watchhi1() & 0x0fff);
+	case 1:
+		watches->watchhi[0] = (read_c0_watchhi0() & 0x0fff);
+	}
+	if (current_cpu_data.watch_reg_use_cnt == 1 &&
+	    (watches->watchhi[0] & 7) == 0) {
+		/* Pathological case of release 1 architecture that
+		 * doesn't set the condition bits.  We assume that
+		 * since we got here, the watch condition was met and
+		 * signal that the conditions requested in watchlo
+		 * were met.  */
+		watches->watchhi[0] |= (watches->watchlo[0] & 7);
+	}
+ }
+
+/*
+ * Disable all watch registers.	 Although only four registers are
+ * installed, all are cleared to eliminate the possibility of endless
+ * looping in the watch handler.
+ */
+void mips_clear_watch_registers(void)
+{
+	switch (current_cpu_data.watch_reg_count) {
+	default:
+		BUG();
+	case 8:
+		write_c0_watchlo7(0);
+	case 7:
+		write_c0_watchlo6(0);
+	case 6:
+		write_c0_watchlo5(0);
+	case 5:
+		write_c0_watchlo4(0);
+	case 4:
+		write_c0_watchlo3(0);
+	case 3:
+		write_c0_watchlo2(0);
+	case 2:
+		write_c0_watchlo1(0);
+	case 1:
+		write_c0_watchlo0(0);
+	}
+}
+
+void mips_probe_watch_registers(struct cpuinfo_mips *c)
+{
+	unsigned int t;
+
+	if ((c->options & MIPS_CPU_WATCH) == 0)
+		return;
+	/*
+	 * Check which of the I,R and W bits are supported, then
+	 * disable the register.
+	 */
+	write_c0_watchlo0(7);
+	back_to_back_c0_hazard();
+	t = read_c0_watchlo0();
+	write_c0_watchlo0(0);
+	c->watch_reg_masks[0] = t & 7;
+
+	/* Write the mask bits and read them back to determine which
+	 * can be used. */
+	c->watch_reg_count = 1;
+	c->watch_reg_use_cnt = 1;
+	t = read_c0_watchhi0();
+	write_c0_watchhi0(t | 0xff8);
+	back_to_back_c0_hazard();
+	t = read_c0_watchhi0();
+	c->watch_reg_masks[0] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo1(7);
+	back_to_back_c0_hazard();
+	t = read_c0_watchlo1();
+	write_c0_watchlo1(0);
+	c->watch_reg_masks[1] = t & 7;
+
+	c->watch_reg_count = 2;
+	c->watch_reg_use_cnt = 2;
+	t = read_c0_watchhi1();
+	write_c0_watchhi1(t | 0xff8);
+	back_to_back_c0_hazard();
+	t = read_c0_watchhi1();
+	c->watch_reg_masks[1] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo2(7);
+	back_to_back_c0_hazard();
+	t = read_c0_watchlo2();
+	write_c0_watchlo2(0);
+	c->watch_reg_masks[2] = t & 7;
+
+	c->watch_reg_count = 3;
+	c->watch_reg_use_cnt = 3;
+	t = read_c0_watchhi2();
+	write_c0_watchhi2(t | 0xff8);
+	back_to_back_c0_hazard();
+	t = read_c0_watchhi2();
+	c->watch_reg_masks[2] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo3(7);
+	back_to_back_c0_hazard();
+	t = read_c0_watchlo3();
+	write_c0_watchlo3(0);
+	c->watch_reg_masks[3] = t & 7;
+
+	c->watch_reg_count = 4;
+	c->watch_reg_use_cnt = 4;
+	t = read_c0_watchhi3();
+	write_c0_watchhi3(t | 0xff8);
+	back_to_back_c0_hazard();
+	t = read_c0_watchhi3();
+	c->watch_reg_masks[3] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	/* We use at most 4, but probe and report up to 8. */
+	c->watch_reg_count = 5;
+	t = read_c0_watchhi4();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 6;
+	t = read_c0_watchhi5();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 7;
+	t = read_c0_watchhi6();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 8;
+}