summaryrefslogtreecommitdiff
path: root/arch/mips/netlogic/xlp
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /arch/mips/netlogic/xlp
Initial import
Diffstat (limited to 'arch/mips/netlogic/xlp')
-rw-r--r--arch/mips/netlogic/xlp/Makefile10
-rw-r--r--arch/mips/netlogic/xlp/ahci-init-xlp2.c390
-rw-r--r--arch/mips/netlogic/xlp/ahci-init.c209
-rw-r--r--arch/mips/netlogic/xlp/cop2-ex.c118
-rw-r--r--arch/mips/netlogic/xlp/dt.c110
-rw-r--r--arch/mips/netlogic/xlp/nlm_hal.c506
-rw-r--r--arch/mips/netlogic/xlp/setup.c179
-rw-r--r--arch/mips/netlogic/xlp/usb-init-xlp2.c288
-rw-r--r--arch/mips/netlogic/xlp/usb-init.c149
-rw-r--r--arch/mips/netlogic/xlp/wakeup.c212
10 files changed, 2171 insertions, 0 deletions
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
new file mode 100644
index 000000000..6b43af0a3
--- /dev/null
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -0,0 +1,10 @@
+obj-y += setup.o nlm_hal.o cop2-ex.o dt.o
+obj-$(CONFIG_SMP) += wakeup.o
+ifdef CONFIG_USB
+obj-y += usb-init.o
+obj-y += usb-init-xlp2.o
+endif
+ifdef CONFIG_SATA_AHCI
+obj-y += ahci-init.o
+obj-y += ahci-init-xlp2.o
+endif
diff --git a/arch/mips/netlogic/xlp/ahci-init-xlp2.c b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
new file mode 100644
index 000000000..7b066a44e
--- /dev/null
+++ b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
@@ -0,0 +1,390 @@
+/*
+ * Copyright (c) 2003-2014 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+#include <linux/pci_ids.h>
+#include <linux/nodemask.h>
+
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/mips-extns.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+
+#define SATA_CTL 0x0
+#define SATA_STATUS 0x1 /* Status Reg */
+#define SATA_INT 0x2 /* Interrupt Reg */
+#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */
+#define SATA_BIU_TIMEOUT 0x4
+#define AXIWRSPERRLOG 0x5
+#define AXIRDSPERRLOG 0x6
+#define BiuTimeoutLow 0x7
+#define BiuTimeoutHi 0x8
+#define BiuSlvErLow 0x9
+#define BiuSlvErHi 0xa
+#define IO_CONFIG_SWAP_DIS 0xb
+#define CR_REG_TIMER 0xc
+#define CORE_ID 0xd
+#define AXI_SLAVE_OPT1 0xe
+#define PHY_MEM_ACCESS 0xf
+#define PHY0_CNTRL 0x10
+#define PHY0_STAT 0x11
+#define PHY0_RX_ALIGN 0x12
+#define PHY0_RX_EQ_LO 0x13
+#define PHY0_RX_EQ_HI 0x14
+#define PHY0_BIST_LOOP 0x15
+#define PHY1_CNTRL 0x16
+#define PHY1_STAT 0x17
+#define PHY1_RX_ALIGN 0x18
+#define PHY1_RX_EQ_LO 0x19
+#define PHY1_RX_EQ_HI 0x1a
+#define PHY1_BIST_LOOP 0x1b
+#define RdExBase 0x1c
+#define RdExLimit 0x1d
+#define CacheAllocBase 0x1e
+#define CacheAllocLimit 0x1f
+#define BiuSlaveCmdGstNum 0x20
+
+/*SATA_CTL Bits */
+#define SATA_RST_N BIT(0) /* Active low reset sata_core phy */
+#define SataCtlReserve0 BIT(1)
+#define M_CSYSREQ BIT(2) /* AXI master low power, not used */
+#define S_CSYSREQ BIT(3) /* AXI slave low power, not used */
+#define P0_CP_DET BIT(8) /* Reserved, bring in from pad */
+#define P0_MP_SW BIT(9) /* Mech Switch */
+#define P0_DISABLE BIT(10) /* disable p0 */
+#define P0_ACT_LED_EN BIT(11) /* Active LED enable */
+#define P0_IRST_HARD_SYNTH BIT(12) /* PHY hard synth reset */
+#define P0_IRST_HARD_TXRX BIT(13) /* PHY lane hard reset */
+#define P0_IRST_POR BIT(14) /* PHY power on reset*/
+#define P0_IPDTXL BIT(15) /* PHY Tx lane dis/power down */
+#define P0_IPDRXL BIT(16) /* PHY Rx lane dis/power down */
+#define P0_IPDIPDMSYNTH BIT(17) /* PHY synthesizer dis/porwer down */
+#define P0_CP_POD_EN BIT(18) /* CP_POD enable */
+#define P0_AT_BYPASS BIT(19) /* P0 address translation by pass */
+#define P1_CP_DET BIT(20) /* Reserved,Cold Detect */
+#define P1_MP_SW BIT(21) /* Mech Switch */
+#define P1_DISABLE BIT(22) /* disable p1 */
+#define P1_ACT_LED_EN BIT(23) /* Active LED enable */
+#define P1_IRST_HARD_SYNTH BIT(24) /* PHY hard synth reset */
+#define P1_IRST_HARD_TXRX BIT(25) /* PHY lane hard reset */
+#define P1_IRST_POR BIT(26) /* PHY power on reset*/
+#define P1_IPDTXL BIT(27) /* PHY Tx lane dis/porwer down */
+#define P1_IPDRXL BIT(28) /* PHY Rx lane dis/porwer down */
+#define P1_IPDIPDMSYNTH BIT(29) /* PHY synthesizer dis/porwer down */
+#define P1_CP_POD_EN BIT(30)
+#define P1_AT_BYPASS BIT(31) /* P1 address translation by pass */
+
+/* Status register */
+#define M_CACTIVE BIT(0) /* m_cactive, not used */
+#define S_CACTIVE BIT(1) /* s_cactive, not used */
+#define P0_PHY_READY BIT(8) /* phy is ready */
+#define P0_CP_POD BIT(9) /* Cold PowerOn */
+#define P0_SLUMBER BIT(10) /* power mode slumber */
+#define P0_PATIAL BIT(11) /* power mode patial */
+#define P0_PHY_SIG_DET BIT(12) /* phy dignal detect */
+#define P0_PHY_CALI BIT(13) /* phy calibration done */
+#define P1_PHY_READY BIT(16) /* phy is ready */
+#define P1_CP_POD BIT(17) /* Cold PowerOn */
+#define P1_SLUMBER BIT(18) /* power mode slumber */
+#define P1_PATIAL BIT(19) /* power mode patial */
+#define P1_PHY_SIG_DET BIT(20) /* phy dignal detect */
+#define P1_PHY_CALI BIT(21) /* phy calibration done */
+
+/* SATA CR_REG_TIMER bits */
+#define CR_TIME_SCALE (0x1000 << 0)
+
+/* SATA PHY specific registers start and end address */
+#define RXCDRCALFOSC0 0x0065
+#define CALDUTY 0x006e
+#define RXDPIF 0x8065
+#define PPMDRIFTMAX_HI 0x80A4
+
+#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r)
+#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v)
+#define nlm_get_sata_pcibase(node) \
+ nlm_pcicfg_base(XLP9XX_IO_SATA_OFFSET(node))
+#define nlm_get_sata_regbase(node) \
+ (nlm_get_sata_pcibase(node) + 0x100)
+
+/* SATA PHY config for register block 1 0x0065 .. 0x006e */
+static const u8 sata_phy_config1[] = {
+ 0xC9, 0xC9, 0x07, 0x07, 0x18, 0x18, 0x01, 0x01, 0x22, 0x00
+};
+
+/* SATA PHY config for register block 2 0x0x8065 .. 0x0x80A4 */
+static const u8 sata_phy_config2[] = {
+ 0xAA, 0x00, 0x4C, 0xC9, 0xC9, 0x07, 0x07, 0x18,
+ 0x18, 0x05, 0x0C, 0x10, 0x00, 0x10, 0x00, 0xFF,
+ 0xCF, 0xF7, 0xE1, 0xF5, 0xFD, 0xFD, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5, 0xFD, 0xFD,
+ 0xF5, 0xF5, 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5,
+ 0xFD, 0xFD, 0xF5, 0xF5, 0xFF, 0xFF, 0xFF, 0xF5,
+ 0x3F, 0x00, 0x32, 0x00, 0x03, 0x01, 0x05, 0x05,
+ 0x04, 0x00, 0x00, 0x08, 0x04, 0x00, 0x00, 0x04,
+};
+
+const int sata_phy_debug = 0; /* set to verify PHY writes */
+
+static void sata_clear_glue_reg(u64 regbase, u32 off, u32 bit)
+{
+ u32 reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val & ~bit));
+}
+
+static void sata_set_glue_reg(u64 regbase, u32 off, u32 bit)
+{
+ u32 reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val | bit));
+}
+
+static void write_phy_reg(u64 regbase, u32 addr, u32 physel, u8 data)
+{
+ nlm_write_sata_reg(regbase, PHY_MEM_ACCESS,
+ (1u << 31) | (physel << 24) | (data << 16) | addr);
+ udelay(850);
+}
+
+static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel)
+{
+ u32 val;
+
+ nlm_write_sata_reg(regbase, PHY_MEM_ACCESS,
+ (0 << 31) | (physel << 24) | (0 << 16) | addr);
+ udelay(850);
+ val = nlm_read_sata_reg(regbase, PHY_MEM_ACCESS);
+ return (val >> 16) & 0xff;
+}
+
+static void config_sata_phy(u64 regbase)
+{
+ u32 port, i, reg;
+ u8 val;
+
+ for (port = 0; port < 2; port++) {
+ for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
+ write_phy_reg(regbase, reg, port, sata_phy_config1[i]);
+
+ for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
+ write_phy_reg(regbase, reg, port, sata_phy_config2[i]);
+
+ /* Fix for PHY link up failures at lower temperatures */
+ write_phy_reg(regbase, 0x800F, port, 0x1f);
+
+ val = read_phy_reg(regbase, 0x0029, port);
+ write_phy_reg(regbase, 0x0029, port, val | (0x7 << 1));
+
+ val = read_phy_reg(regbase, 0x0056, port);
+ write_phy_reg(regbase, 0x0056, port, val & ~(1 << 3));
+
+ val = read_phy_reg(regbase, 0x0018, port);
+ write_phy_reg(regbase, 0x0018, port, val & ~(0x7 << 0));
+ }
+}
+
+static void check_phy_register(u64 regbase, u32 addr, u32 physel, u8 xdata)
+{
+ u8 data;
+
+ data = read_phy_reg(regbase, addr, physel);
+ pr_info("PHY read addr = 0x%x physel = %d data = 0x%x %s\n",
+ addr, physel, data, data == xdata ? "TRUE" : "FALSE");
+}
+
+static void verify_sata_phy_config(u64 regbase)
+{
+ u32 port, i, reg;
+
+ for (port = 0; port < 2; port++) {
+ for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
+ check_phy_register(regbase, reg, port,
+ sata_phy_config1[i]);
+
+ for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
+ check_phy_register(regbase, reg, port,
+ sata_phy_config2[i]);
+ }
+}
+
+static void nlm_sata_firmware_init(int node)
+{
+ u32 reg_val;
+ u64 regbase;
+ int n;
+
+ pr_info("Initializing XLP9XX On-chip AHCI...\n");
+ regbase = nlm_get_sata_regbase(node);
+
+ /* Reset port0 */
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_POR);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDTXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDRXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH);
+
+ /* port1 */
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_POR);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDTXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDRXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH);
+ udelay(300);
+
+ /* Set PHY */
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IPDTXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IPDRXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IPDTXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IPDRXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH);
+
+ udelay(1000);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_POR);
+ udelay(1000);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_POR);
+ udelay(1000);
+
+ /* setup PHY */
+ config_sata_phy(regbase);
+ if (sata_phy_debug)
+ verify_sata_phy_config(regbase);
+
+ udelay(1000);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH);
+ udelay(300);
+
+ /* Override reset in serial PHY mode */
+ sata_set_glue_reg(regbase, CR_REG_TIMER, CR_TIME_SCALE);
+ /* Set reset SATA */
+ sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+ sata_set_glue_reg(regbase, SATA_CTL, M_CSYSREQ);
+ sata_set_glue_reg(regbase, SATA_CTL, S_CSYSREQ);
+
+ pr_debug("Waiting for PHYs to come up.\n");
+ n = 10000;
+ do {
+ reg_val = nlm_read_sata_reg(regbase, SATA_STATUS);
+ if ((reg_val & P1_PHY_READY) && (reg_val & P0_PHY_READY))
+ break;
+ udelay(10);
+ } while (--n > 0);
+
+ if (reg_val & P0_PHY_READY)
+ pr_info("PHY0 is up.\n");
+ else
+ pr_info("PHY0 is down.\n");
+ if (reg_val & P1_PHY_READY)
+ pr_info("PHY1 is up.\n");
+ else
+ pr_info("PHY1 is down.\n");
+
+ pr_info("XLP AHCI Init Done.\n");
+}
+
+static int __init nlm_ahci_init(void)
+{
+ int node;
+
+ if (!cpu_is_xlp9xx())
+ return 0;
+ for (node = 0; node < NLM_NR_NODES; node++)
+ if (nlm_node_present(node))
+ nlm_sata_firmware_init(node);
+ return 0;
+}
+
+static void nlm_sata_intr_ack(struct irq_data *data)
+{
+ u64 regbase;
+ u32 val;
+ int node;
+
+ node = data->irq / NLM_IRQS_PER_NODE;
+ regbase = nlm_get_sata_regbase(node);
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+}
+
+static void nlm_sata_fixup_bar(struct pci_dev *dev)
+{
+ dev->resource[5] = dev->resource[0];
+ memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
+}
+
+static void nlm_sata_fixup_final(struct pci_dev *dev)
+{
+ u32 val;
+ u64 regbase;
+ int node;
+
+ /* Find end bridge function to find node */
+ node = xlp_socdev_to_node(dev);
+ regbase = nlm_get_sata_regbase(node);
+
+ /* clear pending interrupts and then enable them */
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+
+ /* Enable only the core interrupt */
+ sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1);
+
+ dev->irq = nlm_irq_to_xirq(node, PIC_SATA_IRQ);
+ nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack);
+}
+
+arch_initcall(nlm_ahci_init);
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA,
+ nlm_sata_fixup_bar);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA,
+ nlm_sata_fixup_final);
diff --git a/arch/mips/netlogic/xlp/ahci-init.c b/arch/mips/netlogic/xlp/ahci-init.c
new file mode 100644
index 000000000..92be1a325
--- /dev/null
+++ b/arch/mips/netlogic/xlp/ahci-init.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (c) 2003-2014 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/mips-extns.h>
+
+#define SATA_CTL 0x0
+#define SATA_STATUS 0x1 /* Status Reg */
+#define SATA_INT 0x2 /* Interrupt Reg */
+#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */
+#define SATA_CR_REG_TIMER 0x4 /* PHY Conrol Timer Reg */
+#define SATA_CORE_ID 0x5 /* Core ID Reg */
+#define SATA_AXI_SLAVE_OPT1 0x6 /* AXI Slave Options Reg */
+#define SATA_PHY_LOS_LEV 0x7 /* PHY LOS Level Reg */
+#define SATA_PHY_MULTI 0x8 /* PHY Multiplier Reg */
+#define SATA_PHY_CLK_SEL 0x9 /* Clock Select Reg */
+#define SATA_PHY_AMP1_GEN1 0xa /* PHY Transmit Amplitude Reg 1 */
+#define SATA_PHY_AMP1_GEN2 0xb /* PHY Transmit Amplitude Reg 2 */
+#define SATA_PHY_AMP1_GEN3 0xc /* PHY Transmit Amplitude Reg 3 */
+#define SATA_PHY_PRE1 0xd /* PHY Transmit Preemphasis Reg 1 */
+#define SATA_PHY_PRE2 0xe /* PHY Transmit Preemphasis Reg 2 */
+#define SATA_PHY_PRE3 0xf /* PHY Transmit Preemphasis Reg 3 */
+#define SATA_SPDMODE 0x10 /* Speed Mode Reg */
+#define SATA_REFCLK 0x11 /* Reference Clock Control Reg */
+#define SATA_BYTE_SWAP_DIS 0x12 /* byte swap disable */
+
+/*SATA_CTL Bits */
+#define SATA_RST_N BIT(0)
+#define PHY0_RESET_N BIT(16)
+#define PHY1_RESET_N BIT(17)
+#define PHY2_RESET_N BIT(18)
+#define PHY3_RESET_N BIT(19)
+#define M_CSYSREQ BIT(2)
+#define S_CSYSREQ BIT(3)
+
+/*SATA_STATUS Bits */
+#define P0_PHY_READY BIT(4)
+#define P1_PHY_READY BIT(5)
+#define P2_PHY_READY BIT(6)
+#define P3_PHY_READY BIT(7)
+
+#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r)
+#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v)
+#define nlm_get_sata_pcibase(node) \
+ nlm_pcicfg_base(XLP_IO_SATA_OFFSET(node))
+/* SATA device specific configuration registers are starts at 0x900 offset */
+#define nlm_get_sata_regbase(node) \
+ (nlm_get_sata_pcibase(node) + 0x900)
+
+static void sata_clear_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
+{
+ uint32_t reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val & ~bit));
+}
+
+static void sata_set_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
+{
+ uint32_t reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val | bit));
+}
+
+static void nlm_sata_firmware_init(int node)
+{
+ uint32_t reg_val;
+ uint64_t regbase;
+ int i;
+
+ pr_info("XLP AHCI Initialization started.\n");
+ regbase = nlm_get_sata_regbase(node);
+
+ /* Reset SATA */
+ sata_clear_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+ /* Reset PHY */
+ sata_clear_glue_reg(regbase, SATA_CTL,
+ (PHY3_RESET_N | PHY2_RESET_N
+ | PHY1_RESET_N | PHY0_RESET_N));
+
+ /* Set SATA */
+ sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+ /* Set PHY */
+ sata_set_glue_reg(regbase, SATA_CTL,
+ (PHY3_RESET_N | PHY2_RESET_N
+ | PHY1_RESET_N | PHY0_RESET_N));
+
+ pr_debug("Waiting for PHYs to come up.\n");
+ i = 0;
+ do {
+ reg_val = nlm_read_sata_reg(regbase, SATA_STATUS);
+ i++;
+ } while (((reg_val & 0xF0) != 0xF0) && (i < 10000));
+
+ for (i = 0; i < 4; i++) {
+ if (reg_val & (P0_PHY_READY << i))
+ pr_info("PHY%d is up.\n", i);
+ else
+ pr_info("PHY%d is down.\n", i);
+ }
+
+ pr_info("XLP AHCI init done.\n");
+}
+
+static int __init nlm_ahci_init(void)
+{
+ int node = 0;
+ int chip = read_c0_prid() & PRID_IMP_MASK;
+
+ if (chip == PRID_IMP_NETLOGIC_XLP3XX)
+ nlm_sata_firmware_init(node);
+ return 0;
+}
+
+static void nlm_sata_intr_ack(struct irq_data *data)
+{
+ uint32_t val = 0;
+ uint64_t regbase;
+
+ regbase = nlm_get_sata_regbase(nlm_nodeid());
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+}
+
+static void nlm_sata_fixup_bar(struct pci_dev *dev)
+{
+ /*
+ * The AHCI resource is in BAR 0, move it to
+ * BAR 5, where it is expected
+ */
+ dev->resource[5] = dev->resource[0];
+ memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
+}
+
+static void nlm_sata_fixup_final(struct pci_dev *dev)
+{
+ uint32_t val;
+ uint64_t regbase;
+ int node = 0; /* XLP3XX does not support multi-node */
+
+ regbase = nlm_get_sata_regbase(node);
+
+ /* clear pending interrupts and then enable them */
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+
+ /* Mask the core interrupt. If all the interrupts
+ * are enabled there are spurious interrupt flow
+ * happening, to avoid only enable core interrupt
+ * mask.
+ */
+ sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1);
+
+ dev->irq = PIC_SATA_IRQ;
+ nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack);
+}
+
+arch_initcall(nlm_ahci_init);
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
+ nlm_sata_fixup_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
+ nlm_sata_fixup_final);
diff --git a/arch/mips/netlogic/xlp/cop2-ex.c b/arch/mips/netlogic/xlp/cop2-ex.c
new file mode 100644
index 000000000..52bc5de42
--- /dev/null
+++ b/arch/mips/netlogic/xlp/cop2-ex.c
@@ -0,0 +1,118 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Broadcom Corporation.
+ *
+ * based on arch/mips/cavium-octeon/cpu.c
+ * Copyright (C) 2009 Wind River Systems,
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/notifier.h>
+#include <linux/prefetch.h>
+#include <linux/sched.h>
+
+#include <asm/cop2.h>
+#include <asm/current.h>
+#include <asm/mipsregs.h>
+#include <asm/page.h>
+
+#include <asm/netlogic/mips-extns.h>
+
+/*
+ * 64 bit ops are done in inline assembly to support 32 bit
+ * compilation
+ */
+void nlm_cop2_save(struct nlm_cop2_state *r)
+{
+ asm volatile(
+ ".set push\n"
+ ".set noat\n"
+ "dmfc2 $1, $0, 0\n"
+ "sd $1, 0(%1)\n"
+ "dmfc2 $1, $0, 1\n"
+ "sd $1, 8(%1)\n"
+ "dmfc2 $1, $0, 2\n"
+ "sd $1, 16(%1)\n"
+ "dmfc2 $1, $0, 3\n"
+ "sd $1, 24(%1)\n"
+ "dmfc2 $1, $1, 0\n"
+ "sd $1, 0(%2)\n"
+ "dmfc2 $1, $1, 1\n"
+ "sd $1, 8(%2)\n"
+ "dmfc2 $1, $1, 2\n"
+ "sd $1, 16(%2)\n"
+ "dmfc2 $1, $1, 3\n"
+ "sd $1, 24(%2)\n"
+ ".set pop\n"
+ : "=m"(*r)
+ : "r"(r->tx), "r"(r->rx));
+
+ r->tx_msg_status = __read_32bit_c2_register($2, 0);
+ r->rx_msg_status = __read_32bit_c2_register($3, 0) & 0x0fffffff;
+}
+
+void nlm_cop2_restore(struct nlm_cop2_state *r)
+{
+ u32 rstat;
+
+ asm volatile(
+ ".set push\n"
+ ".set noat\n"
+ "ld $1, 0(%1)\n"
+ "dmtc2 $1, $0, 0\n"
+ "ld $1, 8(%1)\n"
+ "dmtc2 $1, $0, 1\n"
+ "ld $1, 16(%1)\n"
+ "dmtc2 $1, $0, 2\n"
+ "ld $1, 24(%1)\n"
+ "dmtc2 $1, $0, 3\n"
+ "ld $1, 0(%2)\n"
+ "dmtc2 $1, $1, 0\n"
+ "ld $1, 8(%2)\n"
+ "dmtc2 $1, $1, 1\n"
+ "ld $1, 16(%2)\n"
+ "dmtc2 $1, $1, 2\n"
+ "ld $1, 24(%2)\n"
+ "dmtc2 $1, $1, 3\n"
+ ".set pop\n"
+ : : "m"(*r), "r"(r->tx), "r"(r->rx));
+
+ __write_32bit_c2_register($2, 0, r->tx_msg_status);
+ rstat = __read_32bit_c2_register($3, 0) & 0xf0000000u;
+ __write_32bit_c2_register($3, 0, r->rx_msg_status | rstat);
+}
+
+static int nlm_cu2_call(struct notifier_block *nfb, unsigned long action,
+ void *data)
+{
+ unsigned long flags;
+ unsigned int status;
+
+ switch (action) {
+ case CU2_EXCEPTION:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ break;
+ local_irq_save(flags);
+ KSTK_STATUS(current) |= ST0_CU2;
+ status = read_c0_status();
+ write_c0_status(status | ST0_CU2);
+ nlm_cop2_restore(&(current->thread.cp2));
+ write_c0_status(status & ~ST0_CU2);
+ local_irq_restore(flags);
+ pr_info("COP2 access enabled for pid %d (%s)\n",
+ current->pid, current->comm);
+ return NOTIFY_BAD; /* Don't call default notifier */
+ }
+
+ return NOTIFY_OK; /* Let default notifier send signals */
+}
+
+static int __init nlm_cu2_setup(void)
+{
+ return cu2_notifier(nlm_cu2_call, 0);
+}
+early_initcall(nlm_cu2_setup);
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
new file mode 100644
index 000000000..a625bdb6d
--- /dev/null
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2003-2013 Broadcom Corporation.
+ * All Rights Reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bootmem.h>
+
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+
+#include <asm/prom.h>
+
+extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_xlp_fvp_begin[],
+ __dtb_xlp_gvp_begin[], __dtb_xlp_rvp_begin[];
+static void *xlp_fdt_blob;
+
+void __init *xlp_dt_init(void *fdtp)
+{
+ if (!fdtp) {
+ switch (current_cpu_data.processor_id & PRID_IMP_MASK) {
+#ifdef CONFIG_DT_XLP_RVP
+ case PRID_IMP_NETLOGIC_XLP5XX:
+ fdtp = __dtb_xlp_rvp_begin;
+ break;
+#endif
+#ifdef CONFIG_DT_XLP_GVP
+ case PRID_IMP_NETLOGIC_XLP9XX:
+ fdtp = __dtb_xlp_gvp_begin;
+ break;
+#endif
+#ifdef CONFIG_DT_XLP_FVP
+ case PRID_IMP_NETLOGIC_XLP2XX:
+ fdtp = __dtb_xlp_fvp_begin;
+ break;
+#endif
+#ifdef CONFIG_DT_XLP_SVP
+ case PRID_IMP_NETLOGIC_XLP3XX:
+ fdtp = __dtb_xlp_svp_begin;
+ break;
+#endif
+#ifdef CONFIG_DT_XLP_EVP
+ case PRID_IMP_NETLOGIC_XLP8XX:
+ fdtp = __dtb_xlp_evp_begin;
+ break;
+#endif
+ default:
+ /* Pick a built-in if any, and hope for the best */
+ fdtp = __dtb_start;
+ break;
+ }
+ }
+ xlp_fdt_blob = fdtp;
+ return fdtp;
+}
+
+void __init xlp_early_init_devtree(void)
+{
+ __dt_setup_arch(xlp_fdt_blob);
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+}
+
+void __init device_tree_init(void)
+{
+ unflatten_and_copy_device_tree();
+}
+
+static struct of_device_id __initdata xlp_ids[] = {
+ { .compatible = "simple-bus", },
+ {},
+};
+
+int __init xlp8xx_ds_publish_devices(void)
+{
+ if (!of_have_populated_dt())
+ return 0;
+ return of_platform_bus_probe(NULL, xlp_ids, NULL);
+}
+
+device_initcall(xlp8xx_ds_publish_devices);
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
new file mode 100644
index 000000000..a8f4144a0
--- /dev/null
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -0,0 +1,506 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+
+#include <asm/mipsregs.h>
+#include <asm/time.h>
+
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/bridge.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+
+/* Main initialization */
+void nlm_node_init(int node)
+{
+ struct nlm_soc_info *nodep;
+
+ nodep = nlm_get_node(node);
+ if (node == 0)
+ nodep->coremask = 1; /* node 0, boot cpu */
+ nodep->sysbase = nlm_get_sys_regbase(node);
+ nodep->picbase = nlm_get_pic_regbase(node);
+ nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1));
+ if (cpu_is_xlp9xx())
+ nodep->socbus = xlp9xx_get_socbus(node);
+ else
+ nodep->socbus = 0;
+ spin_lock_init(&nodep->piclock);
+}
+
+static int xlp9xx_irq_to_irt(int irq)
+{
+ switch (irq) {
+ case PIC_GPIO_IRQ:
+ return 12;
+ case PIC_I2C_0_IRQ:
+ return 125;
+ case PIC_I2C_1_IRQ:
+ return 126;
+ case PIC_I2C_2_IRQ:
+ return 127;
+ case PIC_I2C_3_IRQ:
+ return 128;
+ case PIC_9XX_XHCI_0_IRQ:
+ return 114;
+ case PIC_9XX_XHCI_1_IRQ:
+ return 115;
+ case PIC_9XX_XHCI_2_IRQ:
+ return 116;
+ case PIC_UART_0_IRQ:
+ return 133;
+ case PIC_UART_1_IRQ:
+ return 134;
+ case PIC_SATA_IRQ:
+ return 143;
+ case PIC_SPI_IRQ:
+ return 152;
+ case PIC_MMC_IRQ:
+ return 153;
+ case PIC_PCIE_LINK_LEGACY_IRQ(0):
+ case PIC_PCIE_LINK_LEGACY_IRQ(1):
+ case PIC_PCIE_LINK_LEGACY_IRQ(2):
+ case PIC_PCIE_LINK_LEGACY_IRQ(3):
+ return 191 + irq - PIC_PCIE_LINK_LEGACY_IRQ_BASE;
+ }
+ return -1;
+}
+
+static int xlp_irq_to_irt(int irq)
+{
+ uint64_t pcibase;
+ int devoff, irt;
+
+ devoff = 0;
+ switch (irq) {
+ case PIC_UART_0_IRQ:
+ devoff = XLP_IO_UART0_OFFSET(0);
+ break;
+ case PIC_UART_1_IRQ:
+ devoff = XLP_IO_UART1_OFFSET(0);
+ break;
+ case PIC_MMC_IRQ:
+ devoff = XLP_IO_MMC_OFFSET(0);
+ break;
+ case PIC_I2C_0_IRQ: /* I2C will be fixed up */
+ case PIC_I2C_1_IRQ:
+ case PIC_I2C_2_IRQ:
+ case PIC_I2C_3_IRQ:
+ if (cpu_is_xlpii())
+ devoff = XLP2XX_IO_I2C_OFFSET(0);
+ else
+ devoff = XLP_IO_I2C0_OFFSET(0);
+ break;
+ case PIC_SATA_IRQ:
+ devoff = XLP_IO_SATA_OFFSET(0);
+ break;
+ case PIC_GPIO_IRQ:
+ devoff = XLP_IO_GPIO_OFFSET(0);
+ break;
+ case PIC_NAND_IRQ:
+ devoff = XLP_IO_NAND_OFFSET(0);
+ break;
+ case PIC_SPI_IRQ:
+ devoff = XLP_IO_SPI_OFFSET(0);
+ break;
+ default:
+ if (cpu_is_xlpii()) {
+ switch (irq) {
+ /* XLP2XX has three XHCI USB controller */
+ case PIC_2XX_XHCI_0_IRQ:
+ devoff = XLP2XX_IO_USB_XHCI0_OFFSET(0);
+ break;
+ case PIC_2XX_XHCI_1_IRQ:
+ devoff = XLP2XX_IO_USB_XHCI1_OFFSET(0);
+ break;
+ case PIC_2XX_XHCI_2_IRQ:
+ devoff = XLP2XX_IO_USB_XHCI2_OFFSET(0);
+ break;
+ }
+ } else {
+ switch (irq) {
+ case PIC_EHCI_0_IRQ:
+ devoff = XLP_IO_USB_EHCI0_OFFSET(0);
+ break;
+ case PIC_EHCI_1_IRQ:
+ devoff = XLP_IO_USB_EHCI1_OFFSET(0);
+ break;
+ case PIC_OHCI_0_IRQ:
+ devoff = XLP_IO_USB_OHCI0_OFFSET(0);
+ break;
+ case PIC_OHCI_1_IRQ:
+ devoff = XLP_IO_USB_OHCI1_OFFSET(0);
+ break;
+ case PIC_OHCI_2_IRQ:
+ devoff = XLP_IO_USB_OHCI2_OFFSET(0);
+ break;
+ case PIC_OHCI_3_IRQ:
+ devoff = XLP_IO_USB_OHCI3_OFFSET(0);
+ break;
+ }
+ }
+ }
+
+ if (devoff != 0) {
+ uint32_t val;
+
+ pcibase = nlm_pcicfg_base(devoff);
+ val = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG);
+ if (val == 0xffffffff) {
+ irt = -1;
+ } else {
+ irt = val & 0xffff;
+ /* HW weirdness, I2C IRT entry has to be fixed up */
+ switch (irq) {
+ case PIC_I2C_1_IRQ:
+ irt = irt + 1; break;
+ case PIC_I2C_2_IRQ:
+ irt = irt + 2; break;
+ case PIC_I2C_3_IRQ:
+ irt = irt + 3; break;
+ }
+ }
+ } else if (irq >= PIC_PCIE_LINK_LEGACY_IRQ(0) &&
+ irq <= PIC_PCIE_LINK_LEGACY_IRQ(3)) {
+ /* HW bug, PCI IRT entries are bad on early silicon, fix */
+ irt = PIC_IRT_PCIE_LINK_INDEX(irq -
+ PIC_PCIE_LINK_LEGACY_IRQ_BASE);
+ } else {
+ irt = -1;
+ }
+ return irt;
+}
+
+int nlm_irq_to_irt(int irq)
+{
+ /* return -2 for irqs without 1-1 mapping */
+ if (irq >= PIC_PCIE_LINK_MSI_IRQ(0) && irq <= PIC_PCIE_LINK_MSI_IRQ(3))
+ return -2;
+ if (irq >= PIC_PCIE_MSIX_IRQ(0) && irq <= PIC_PCIE_MSIX_IRQ(3))
+ return -2;
+
+ if (cpu_is_xlp9xx())
+ return xlp9xx_irq_to_irt(irq);
+ else
+ return xlp_irq_to_irt(irq);
+}
+
+static unsigned int nlm_xlp2_get_core_frequency(int node, int core)
+{
+ unsigned int pll_post_div, ctrl_val0, ctrl_val1, denom;
+ uint64_t num, sysbase, clockbase;
+
+ if (cpu_is_xlp9xx()) {
+ clockbase = nlm_get_clock_regbase(node);
+ ctrl_val0 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_CPU_PLL_CTRL0(core));
+ ctrl_val1 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_CPU_PLL_CTRL1(core));
+ } else {
+ sysbase = nlm_get_node(node)->sysbase;
+ ctrl_val0 = nlm_read_sys_reg(sysbase,
+ SYS_CPU_PLL_CTRL0(core));
+ ctrl_val1 = nlm_read_sys_reg(sysbase,
+ SYS_CPU_PLL_CTRL1(core));
+ }
+
+ /* Find PLL post divider value */
+ switch ((ctrl_val0 >> 24) & 0x7) {
+ case 1:
+ pll_post_div = 2;
+ break;
+ case 3:
+ pll_post_div = 4;
+ break;
+ case 7:
+ pll_post_div = 8;
+ break;
+ case 6:
+ pll_post_div = 16;
+ break;
+ case 0:
+ default:
+ pll_post_div = 1;
+ break;
+ }
+
+ num = 1000000ULL * (400 * 3 + 100 * (ctrl_val1 & 0x3f));
+ denom = 3 * pll_post_div;
+ do_div(num, denom);
+
+ return (unsigned int)num;
+}
+
+static unsigned int nlm_xlp_get_core_frequency(int node, int core)
+{
+ unsigned int pll_divf, pll_divr, dfs_div, ext_div;
+ unsigned int rstval, dfsval, denom;
+ uint64_t num, sysbase;
+
+ sysbase = nlm_get_node(node)->sysbase;
+ rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
+ dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
+ pll_divf = ((rstval >> 10) & 0x7f) + 1;
+ pll_divr = ((rstval >> 8) & 0x3) + 1;
+ ext_div = ((rstval >> 30) & 0x3) + 1;
+ dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1;
+
+ num = 800000000ULL * pll_divf;
+ denom = 3 * pll_divr * ext_div * dfs_div;
+ do_div(num, denom);
+
+ return (unsigned int)num;
+}
+
+unsigned int nlm_get_core_frequency(int node, int core)
+{
+ if (cpu_is_xlpii())
+ return nlm_xlp2_get_core_frequency(node, core);
+ else
+ return nlm_xlp_get_core_frequency(node, core);
+}
+
+/*
+ * Calculate PIC frequency from PLL registers.
+ * freq_out = (ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13) /
+ * ((2^ctrl0[7:5]) * Table(ctrl0[26:24]))
+ */
+static unsigned int nlm_xlp2_get_pic_frequency(int node)
+{
+ u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div, cpu_xlp9xx;
+ u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div;
+ u64 sysbase, pll_out_freq_num, ref_clk_select, clockbase, ref_clk;
+
+ sysbase = nlm_get_node(node)->sysbase;
+ clockbase = nlm_get_clock_regbase(node);
+ cpu_xlp9xx = cpu_is_xlp9xx();
+
+ /* Find ref_clk_base */
+ if (cpu_xlp9xx)
+ ref_clk_select = (nlm_read_sys_reg(sysbase,
+ SYS_9XX_POWER_ON_RESET_CFG) >> 18) & 0x3;
+ else
+ ref_clk_select = (nlm_read_sys_reg(sysbase,
+ SYS_POWER_ON_RESET_CFG) >> 18) & 0x3;
+ switch (ref_clk_select) {
+ case 0:
+ ref_clk = 200000000ULL;
+ ref_div = 3;
+ break;
+ case 1:
+ ref_clk = 100000000ULL;
+ ref_div = 1;
+ break;
+ case 2:
+ ref_clk = 125000000ULL;
+ ref_div = 1;
+ break;
+ case 3:
+ ref_clk = 400000000ULL;
+ ref_div = 3;
+ break;
+ }
+
+ /* Find the clock source PLL device for PIC */
+ if (cpu_xlp9xx) {
+ reg_select = nlm_read_sys_reg(clockbase,
+ SYS_9XX_CLK_DEV_SEL_REG) & 0x3;
+ switch (reg_select) {
+ case 0:
+ ctrl_val0 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL0);
+ ctrl_val2 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL2);
+ break;
+ case 1:
+ ctrl_val0 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL0_DEVX(0));
+ ctrl_val2 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL2_DEVX(0));
+ break;
+ case 2:
+ ctrl_val0 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL0_DEVX(1));
+ ctrl_val2 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL2_DEVX(1));
+ break;
+ case 3:
+ ctrl_val0 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL0_DEVX(2));
+ ctrl_val2 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL2_DEVX(2));
+ break;
+ }
+ } else {
+ reg_select = (nlm_read_sys_reg(sysbase,
+ SYS_CLK_DEV_SEL_REG) >> 22) & 0x3;
+ switch (reg_select) {
+ case 0:
+ ctrl_val0 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL0);
+ ctrl_val2 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL2);
+ break;
+ case 1:
+ ctrl_val0 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL0_DEVX(0));
+ ctrl_val2 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL2_DEVX(0));
+ break;
+ case 2:
+ ctrl_val0 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL0_DEVX(1));
+ ctrl_val2 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL2_DEVX(1));
+ break;
+ case 3:
+ ctrl_val0 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL0_DEVX(2));
+ ctrl_val2 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL2_DEVX(2));
+ break;
+ }
+ }
+
+ vco_post_div = (ctrl_val0 >> 5) & 0x7;
+ pll_post_div = (ctrl_val0 >> 24) & 0x7;
+ mdiv = ctrl_val2 & 0xff;
+ fdiv = (ctrl_val2 >> 8) & 0x1fff;
+
+ /* Find PLL post divider value */
+ switch (pll_post_div) {
+ case 1:
+ pll_post_div = 2;
+ break;
+ case 3:
+ pll_post_div = 4;
+ break;
+ case 7:
+ pll_post_div = 8;
+ break;
+ case 6:
+ pll_post_div = 16;
+ break;
+ case 0:
+ default:
+ pll_post_div = 1;
+ break;
+ }
+
+ fdiv = fdiv/(1 << 13);
+ pll_out_freq_num = ((ref_clk >> 1) * (6 + mdiv)) + fdiv;
+ pll_out_freq_den = (1 << vco_post_div) * pll_post_div * ref_div;
+
+ if (pll_out_freq_den > 0)
+ do_div(pll_out_freq_num, pll_out_freq_den);
+
+ /* PIC post divider, which happens after PLL */
+ if (cpu_xlp9xx)
+ pic_div = nlm_read_sys_reg(clockbase,
+ SYS_9XX_CLK_DEV_DIV_REG) & 0x3;
+ else
+ pic_div = (nlm_read_sys_reg(sysbase,
+ SYS_CLK_DEV_DIV_REG) >> 22) & 0x3;
+ do_div(pll_out_freq_num, 1 << pic_div);
+
+ return pll_out_freq_num;
+}
+
+unsigned int nlm_get_pic_frequency(int node)
+{
+ if (cpu_is_xlpii())
+ return nlm_xlp2_get_pic_frequency(node);
+ else
+ return 133333333;
+}
+
+unsigned int nlm_get_cpu_frequency(void)
+{
+ return nlm_get_core_frequency(0, 0);
+}
+
+/*
+ * Fills upto 8 pairs of entries containing the DRAM map of a node
+ * if node < 0, get dram map for all nodes
+ */
+int nlm_get_dram_map(int node, uint64_t *dram_map, int nentries)
+{
+ uint64_t bridgebase, base, lim;
+ uint32_t val;
+ unsigned int barreg, limreg, xlatreg;
+ int i, n, rv;
+
+ /* Look only at mapping on Node 0, we don't handle crazy configs */
+ bridgebase = nlm_get_bridge_regbase(0);
+ rv = 0;
+ for (i = 0; i < 8; i++) {
+ if (rv + 1 >= nentries)
+ break;
+ if (cpu_is_xlp9xx()) {
+ barreg = BRIDGE_9XX_DRAM_BAR(i);
+ limreg = BRIDGE_9XX_DRAM_LIMIT(i);
+ xlatreg = BRIDGE_9XX_DRAM_NODE_TRANSLN(i);
+ } else {
+ barreg = BRIDGE_DRAM_BAR(i);
+ limreg = BRIDGE_DRAM_LIMIT(i);
+ xlatreg = BRIDGE_DRAM_NODE_TRANSLN(i);
+ }
+ if (node >= 0) {
+ /* node specified, get node mapping of BAR */
+ val = nlm_read_bridge_reg(bridgebase, xlatreg);
+ n = (val >> 1) & 0x3;
+ if (n != node)
+ continue;
+ }
+ val = nlm_read_bridge_reg(bridgebase, barreg);
+ val = (val >> 12) & 0xfffff;
+ base = (uint64_t) val << 20;
+ val = nlm_read_bridge_reg(bridgebase, limreg);
+ val = (val >> 12) & 0xfffff;
+ if (val == 0) /* BAR not used */
+ continue;
+ lim = ((uint64_t)val + 1) << 20;
+ dram_map[rv] = base;
+ dram_map[rv + 1] = lim;
+ rv += 2;
+ }
+ return rv;
+}
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
new file mode 100644
index 000000000..f743fd9da
--- /dev/null
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_fdt.h>
+
+#include <asm/idle.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+
+uint64_t nlm_io_base;
+struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
+cpumask_t nlm_cpumask = CPU_MASK_CPU0;
+unsigned int nlm_threads_per_core;
+
+static void nlm_linux_exit(void)
+{
+ uint64_t sysbase = nlm_get_node(0)->sysbase;
+
+ if (cpu_is_xlp9xx())
+ nlm_write_sys_reg(sysbase, SYS_9XX_CHIP_RESET, 1);
+ else
+ nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1);
+ for ( ; ; )
+ cpu_wait();
+}
+
+static void nlm_fixup_mem(void)
+{
+ const int pref_backup = 512;
+ int i;
+
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
+ continue;
+ boot_mem_map.map[i].size -= pref_backup;
+ }
+}
+
+static void __init xlp_init_mem_from_bars(void)
+{
+ uint64_t map[16];
+ int i, n;
+
+ n = nlm_get_dram_map(-1, map, ARRAY_SIZE(map)); /* -1 : all nodes */
+ for (i = 0; i < n; i += 2) {
+ /* exclude 0x1000_0000-0x2000_0000, u-boot device */
+ if (map[i] <= 0x10000000 && map[i+1] > 0x10000000)
+ map[i+1] = 0x10000000;
+ if (map[i] > 0x10000000 && map[i] < 0x20000000)
+ map[i] = 0x20000000;
+
+ add_memory_region(map[i], map[i+1] - map[i], BOOT_MEM_RAM);
+ }
+}
+
+void __init plat_mem_setup(void)
+{
+#ifdef CONFIG_SMP
+ nlm_wakeup_secondary_cpus();
+
+ /* update TLB size after waking up threads */
+ current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
+ register_smp_ops(&nlm_smp_ops);
+#endif
+ _machine_restart = (void (*)(char *))nlm_linux_exit;
+ _machine_halt = nlm_linux_exit;
+ pm_power_off = nlm_linux_exit;
+
+ /* memory and bootargs from DT */
+ xlp_early_init_devtree();
+
+ if (boot_mem_map.nr_map == 0) {
+ pr_info("Using DRAM BARs for memory map.\n");
+ xlp_init_mem_from_bars();
+ }
+ /* Calculate and setup wired entries for mapped kernel */
+ nlm_fixup_mem();
+}
+
+const char *get_system_type(void)
+{
+ switch (read_c0_prid() & PRID_IMP_MASK) {
+ case PRID_IMP_NETLOGIC_XLP9XX:
+ case PRID_IMP_NETLOGIC_XLP5XX:
+ case PRID_IMP_NETLOGIC_XLP2XX:
+ return "Broadcom XLPII Series";
+ default:
+ return "Netlogic XLP Series";
+ }
+}
+
+void __init prom_free_prom_memory(void)
+{
+ /* Nothing yet */
+}
+
+void xlp_mmu_init(void)
+{
+ u32 conf4;
+
+ if (cpu_is_xlpii()) {
+ /* XLPII series has extended pagesize in config 4 */
+ conf4 = read_c0_config4() & ~0x1f00u;
+ write_c0_config4(conf4 | ((PAGE_SHIFT - 10) / 2 << 8));
+ } else {
+ /* enable extended TLB and Large Fixed TLB */
+ write_c0_config6(read_c0_config6() | 0x24);
+
+ /* set page mask of extended Fixed TLB in config7 */
+ write_c0_config7(PM_DEFAULT_MASK >>
+ (13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
+ }
+}
+
+void nlm_percpu_init(int hwcpuid)
+{
+}
+
+void __init prom_init(void)
+{
+ void *reset_vec;
+
+ nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
+ nlm_init_boot_cpu();
+ xlp_mmu_init();
+ nlm_node_init(0);
+ xlp_dt_init((void *)(long)fw_arg0);
+
+ /* Update reset entry point with CPU init code */
+ reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS);
+ memset(reset_vec, 0, RESET_VEC_SIZE);
+ memcpy(reset_vec, (void *)nlm_reset_entry,
+ (nlm_reset_entry_end - nlm_reset_entry));
+
+#ifdef CONFIG_SMP
+ cpumask_setall(&nlm_cpumask);
+#endif
+}
diff --git a/arch/mips/netlogic/xlp/usb-init-xlp2.c b/arch/mips/netlogic/xlp/usb-init-xlp2.c
new file mode 100644
index 000000000..2524939a5
--- /dev/null
+++ b/arch/mips/netlogic/xlp/usb-init-xlp2.c
@@ -0,0 +1,288 @@
+/*
+ * Copyright (c) 2003-2013 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+
+#define XLPII_USB3_CTL_0 0xc0
+#define XLPII_VAUXRST BIT(0)
+#define XLPII_VCCRST BIT(1)
+#define XLPII_NUM2PORT 9
+#define XLPII_NUM3PORT 13
+#define XLPII_RTUNEREQ BIT(20)
+#define XLPII_MS_CSYSREQ BIT(21)
+#define XLPII_XS_CSYSREQ BIT(22)
+#define XLPII_RETENABLEN BIT(23)
+#define XLPII_TX2RX BIT(24)
+#define XLPII_XHCIREV BIT(25)
+#define XLPII_ECCDIS BIT(26)
+
+#define XLPII_USB3_INT_REG 0xc2
+#define XLPII_USB3_INT_MASK 0xc3
+
+#define XLPII_USB_PHY_TEST 0xc6
+#define XLPII_PRESET BIT(0)
+#define XLPII_ATERESET BIT(1)
+#define XLPII_LOOPEN BIT(2)
+#define XLPII_TESTPDHSP BIT(3)
+#define XLPII_TESTPDSSP BIT(4)
+#define XLPII_TESTBURNIN BIT(5)
+
+#define XLPII_USB_PHY_LOS_LV 0xc9
+#define XLPII_LOSLEV 0
+#define XLPII_LOSBIAS 5
+#define XLPII_SQRXTX 8
+#define XLPII_TXBOOST 11
+#define XLPII_RSLKSEL 16
+#define XLPII_FSEL 20
+
+#define XLPII_USB_RFCLK_REG 0xcc
+#define XLPII_VVLD 30
+
+#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v)
+
+#define nlm_xlpii_get_usb_pcibase(node, inst) \
+ nlm_pcicfg_base(cpu_is_xlp9xx() ? \
+ XLP9XX_IO_USB_OFFSET(node, inst) : \
+ XLP2XX_IO_USB_OFFSET(node, inst))
+#define nlm_xlpii_get_usb_regbase(node, inst) \
+ (nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
+
+static void xlp2xx_usb_ack(struct irq_data *data)
+{
+ u64 port_addr;
+
+ switch (data->irq) {
+ case PIC_2XX_XHCI_0_IRQ:
+ port_addr = nlm_xlpii_get_usb_regbase(0, 1);
+ break;
+ case PIC_2XX_XHCI_1_IRQ:
+ port_addr = nlm_xlpii_get_usb_regbase(0, 2);
+ break;
+ case PIC_2XX_XHCI_2_IRQ:
+ port_addr = nlm_xlpii_get_usb_regbase(0, 3);
+ break;
+ default:
+ pr_err("No matching USB irq!\n");
+ return;
+ }
+ nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+}
+
+static void xlp9xx_usb_ack(struct irq_data *data)
+{
+ u64 port_addr;
+ int node, irq;
+
+ /* Find the node and irq on the node */
+ irq = data->irq % NLM_IRQS_PER_NODE;
+ node = data->irq / NLM_IRQS_PER_NODE;
+
+ switch (irq) {
+ case PIC_9XX_XHCI_0_IRQ:
+ port_addr = nlm_xlpii_get_usb_regbase(node, 1);
+ break;
+ case PIC_9XX_XHCI_1_IRQ:
+ port_addr = nlm_xlpii_get_usb_regbase(node, 2);
+ break;
+ case PIC_9XX_XHCI_2_IRQ:
+ port_addr = nlm_xlpii_get_usb_regbase(node, 3);
+ break;
+ default:
+ pr_err("No matching USB irq %d node %d!\n", irq, node);
+ return;
+ }
+ nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+}
+
+static void nlm_xlpii_usb_hw_reset(int node, int port)
+{
+ u64 port_addr, xhci_base, pci_base;
+ void __iomem *corebase;
+ u32 val;
+
+ port_addr = nlm_xlpii_get_usb_regbase(node, port);
+
+ /* Set frequency */
+ val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV);
+ val &= ~(0x3f << XLPII_FSEL);
+ val |= (0x27 << XLPII_FSEL);
+ nlm_write_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV, val);
+
+ val = nlm_read_usb_reg(port_addr, XLPII_USB_RFCLK_REG);
+ val |= (1 << XLPII_VVLD);
+ nlm_write_usb_reg(port_addr, XLPII_USB_RFCLK_REG, val);
+
+ /* PHY reset */
+ val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_TEST);
+ val &= (XLPII_ATERESET | XLPII_LOOPEN | XLPII_TESTPDHSP
+ | XLPII_TESTPDSSP | XLPII_TESTBURNIN);
+ nlm_write_usb_reg(port_addr, XLPII_USB_PHY_TEST, val);
+
+ /* Setup control register */
+ val = XLPII_VAUXRST | XLPII_VCCRST | (1 << XLPII_NUM2PORT)
+ | (1 << XLPII_NUM3PORT) | XLPII_MS_CSYSREQ | XLPII_XS_CSYSREQ
+ | XLPII_RETENABLEN | XLPII_XHCIREV;
+ nlm_write_usb_reg(port_addr, XLPII_USB3_CTL_0, val);
+
+ /* Enable interrupts */
+ nlm_write_usb_reg(port_addr, XLPII_USB3_INT_MASK, 0x00000001);
+
+ /* Clear all interrupts */
+ nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+
+ udelay(2000);
+
+ /* XHCI configuration at PCI mem */
+ pci_base = nlm_xlpii_get_usb_pcibase(node, port);
+ xhci_base = nlm_read_usb_reg(pci_base, 0x4) & ~0xf;
+ corebase = ioremap(xhci_base, 0x10000);
+ if (!corebase)
+ return;
+
+ writel(0x240002, corebase + 0xc2c0);
+ /* GCTL 0xc110 */
+ val = readl(corebase + 0xc110);
+ val &= ~(0x3 << 12);
+ val |= (1 << 12);
+ writel(val, corebase + 0xc110);
+ udelay(100);
+
+ /* PHYCFG 0xc200 */
+ val = readl(corebase + 0xc200);
+ val &= ~(1 << 6);
+ writel(val, corebase + 0xc200);
+ udelay(100);
+
+ /* PIPECTL 0xc2c0 */
+ val = readl(corebase + 0xc2c0);
+ val &= ~(1 << 17);
+ writel(val, corebase + 0xc2c0);
+
+ iounmap(corebase);
+}
+
+static int __init nlm_platform_xlpii_usb_init(void)
+{
+ int node;
+
+ if (!cpu_is_xlpii())
+ return 0;
+
+ if (!cpu_is_xlp9xx()) {
+ /* XLP 2XX single node */
+ pr_info("Initializing 2XX USB Interface\n");
+ nlm_xlpii_usb_hw_reset(0, 1);
+ nlm_xlpii_usb_hw_reset(0, 2);
+ nlm_xlpii_usb_hw_reset(0, 3);
+ nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlp2xx_usb_ack);
+ nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlp2xx_usb_ack);
+ nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlp2xx_usb_ack);
+ return 0;
+ }
+
+ /* XLP 9XX, multi-node */
+ pr_info("Initializing 9XX/5XX USB Interface\n");
+ for (node = 0; node < NLM_NR_NODES; node++) {
+ if (!nlm_node_present(node))
+ continue;
+ nlm_xlpii_usb_hw_reset(node, 1);
+ nlm_xlpii_usb_hw_reset(node, 2);
+ nlm_xlpii_usb_hw_reset(node, 3);
+ nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_0_IRQ, xlp9xx_usb_ack);
+ nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_1_IRQ, xlp9xx_usb_ack);
+ nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_2_IRQ, xlp9xx_usb_ack);
+ }
+ return 0;
+}
+
+arch_initcall(nlm_platform_xlpii_usb_init);
+
+static u64 xlp_usb_dmamask = ~(u32)0;
+
+/* Fixup the IRQ for USB devices which is exist on XLP9XX SOC PCIE bus */
+static void nlm_xlp9xx_usb_fixup_final(struct pci_dev *dev)
+{
+ int node;
+
+ node = xlp_socdev_to_node(dev);
+ dev->dev.dma_mask = &xlp_usb_dmamask;
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ switch (dev->devfn) {
+ case 0x21:
+ dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_0_IRQ);
+ break;
+ case 0x22:
+ dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_1_IRQ);
+ break;
+ case 0x23:
+ dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_2_IRQ);
+ break;
+ }
+}
+
+/* Fixup the IRQ for USB devices which is exist on XLP2XX SOC PCIE bus */
+static void nlm_xlp2xx_usb_fixup_final(struct pci_dev *dev)
+{
+ dev->dev.dma_mask = &xlp_usb_dmamask;
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ switch (dev->devfn) {
+ case 0x21:
+ dev->irq = PIC_2XX_XHCI_0_IRQ;
+ break;
+ case 0x22:
+ dev->irq = PIC_2XX_XHCI_1_IRQ;
+ break;
+ case 0x23:
+ dev->irq = PIC_2XX_XHCI_2_IRQ;
+ break;
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_XHCI,
+ nlm_xlp9xx_usb_fixup_final);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI,
+ nlm_xlp2xx_usb_fixup_final);
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
new file mode 100644
index 000000000..f8117985f
--- /dev/null
+++ b/arch/mips/netlogic/xlp/usb-init.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+
+/*
+ * USB glue logic registers, used only during initialization
+ */
+#define USB_CTL_0 0x01
+#define USB_PHY_0 0x0A
+#define USB_PHY_RESET 0x01
+#define USB_PHY_PORT_RESET_0 0x10
+#define USB_PHY_PORT_RESET_1 0x20
+#define USB_CONTROLLER_RESET 0x01
+#define USB_INT_STATUS 0x0E
+#define USB_INT_EN 0x0F
+#define USB_PHY_INTERRUPT_EN 0x01
+#define USB_OHCI_INTERRUPT_EN 0x02
+#define USB_OHCI_INTERRUPT1_EN 0x04
+#define USB_OHCI_INTERRUPT2_EN 0x08
+#define USB_CTRL_INTERRUPT_EN 0x10
+
+#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v)
+#define nlm_get_usb_pcibase(node, inst) \
+ nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst))
+#define nlm_get_usb_regbase(node, inst) \
+ (nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
+
+static void nlm_usb_intr_en(int node, int port)
+{
+ uint32_t val;
+ uint64_t port_addr;
+
+ port_addr = nlm_get_usb_regbase(node, port);
+ val = nlm_read_usb_reg(port_addr, USB_INT_EN);
+ val = USB_CTRL_INTERRUPT_EN | USB_OHCI_INTERRUPT_EN |
+ USB_OHCI_INTERRUPT1_EN | USB_OHCI_INTERRUPT2_EN;
+ nlm_write_usb_reg(port_addr, USB_INT_EN, val);
+}
+
+static void nlm_usb_hw_reset(int node, int port)
+{
+ uint64_t port_addr;
+ uint32_t val;
+
+ /* reset USB phy */
+ port_addr = nlm_get_usb_regbase(node, port);
+ val = nlm_read_usb_reg(port_addr, USB_PHY_0);
+ val &= ~(USB_PHY_RESET | USB_PHY_PORT_RESET_0 | USB_PHY_PORT_RESET_1);
+ nlm_write_usb_reg(port_addr, USB_PHY_0, val);
+
+ mdelay(100);
+ val = nlm_read_usb_reg(port_addr, USB_CTL_0);
+ val &= ~(USB_CONTROLLER_RESET);
+ val |= 0x4;
+ nlm_write_usb_reg(port_addr, USB_CTL_0, val);
+}
+
+static int __init nlm_platform_usb_init(void)
+{
+ if (cpu_is_xlpii())
+ return 0;
+
+ pr_info("Initializing USB Interface\n");
+ nlm_usb_hw_reset(0, 0);
+ nlm_usb_hw_reset(0, 3);
+
+ /* Enable PHY interrupts */
+ nlm_usb_intr_en(0, 0);
+ nlm_usb_intr_en(0, 3);
+
+ return 0;
+}
+
+arch_initcall(nlm_platform_usb_init);
+
+static u64 xlp_usb_dmamask = ~(u32)0;
+
+/* Fixup the IRQ for USB devices which is exist on XLP SOC PCIE bus */
+static void nlm_usb_fixup_final(struct pci_dev *dev)
+{
+ dev->dev.dma_mask = &xlp_usb_dmamask;
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ switch (dev->devfn) {
+ case 0x10:
+ dev->irq = PIC_EHCI_0_IRQ;
+ break;
+ case 0x11:
+ dev->irq = PIC_OHCI_0_IRQ;
+ break;
+ case 0x12:
+ dev->irq = PIC_OHCI_1_IRQ;
+ break;
+ case 0x13:
+ dev->irq = PIC_EHCI_1_IRQ;
+ break;
+ case 0x14:
+ dev->irq = PIC_OHCI_2_IRQ;
+ break;
+ case 0x15:
+ dev->irq = PIC_OHCI_3_IRQ;
+ break;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI,
+ nlm_usb_fixup_final);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_OHCI,
+ nlm_usb_fixup_final);
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
new file mode 100644
index 000000000..87d7846af
--- /dev/null
+++ b/arch/mips/netlogic/xlp/wakeup.c
@@ -0,0 +1,212 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/threads.h>
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/string.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/mips-extns.h>
+
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+
+static int xlp_wakeup_core(uint64_t sysbase, int node, int core)
+{
+ uint32_t coremask, value;
+ int count, resetreg;
+
+ coremask = (1 << core);
+
+ /* Enable CPU clock in case of 8xx/3xx */
+ if (!cpu_is_xlpii()) {
+ value = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL);
+ value &= ~coremask;
+ nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value);
+ }
+
+ /* On 9XX, mark coherent first */
+ if (cpu_is_xlp9xx()) {
+ value = nlm_read_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE);
+ value &= ~coremask;
+ nlm_write_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE, value);
+ }
+
+ /* Remove CPU Reset */
+ resetreg = cpu_is_xlp9xx() ? SYS_9XX_CPU_RESET : SYS_CPU_RESET;
+ value = nlm_read_sys_reg(sysbase, resetreg);
+ value &= ~coremask;
+ nlm_write_sys_reg(sysbase, resetreg, value);
+
+ /* We are done on 9XX */
+ if (cpu_is_xlp9xx())
+ return 1;
+
+ /* Poll for CPU to mark itself coherent on other type of XLP */
+ count = 100000;
+ do {
+ value = nlm_read_sys_reg(sysbase, SYS_CPU_NONCOHERENT_MODE);
+ } while ((value & coremask) != 0 && --count > 0);
+
+ return count != 0;
+}
+
+static int wait_for_cpus(int cpu, int bootcpu)
+{
+ volatile uint32_t *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
+ int i, count, notready;
+
+ count = 0x800000;
+ do {
+ notready = nlm_threads_per_core;
+ for (i = 0; i < nlm_threads_per_core; i++)
+ if (cpu_ready[cpu + i] || (cpu + i) == bootcpu)
+ --notready;
+ } while (notready != 0 && --count > 0);
+
+ return count != 0;
+}
+
+static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
+{
+ struct nlm_soc_info *nodep;
+ uint64_t syspcibase, fusebase;
+ uint32_t syscoremask, mask, fusemask;
+ int core, n, cpu, ncores;
+
+ for (n = 0; n < NLM_NR_NODES; n++) {
+ if (n != 0) {
+ /* check if node exists and is online */
+ if (cpu_is_xlp9xx()) {
+ int b = xlp9xx_get_socbus(n);
+ pr_info("Node %d SoC PCI bus %d.\n", n, b);
+ if (b == 0)
+ break;
+ } else {
+ syspcibase = nlm_get_sys_pcibase(n);
+ if (nlm_read_reg(syspcibase, 0) == 0xffffffff)
+ break;
+ }
+ nlm_node_init(n);
+ }
+
+ /* read cores in reset from SYS */
+ nodep = nlm_get_node(n);
+
+ if (cpu_is_xlp9xx()) {
+ fusebase = nlm_get_fuse_regbase(n);
+ fusemask = nlm_read_reg(fusebase, FUSE_9XX_DEVCFG6);
+ switch (read_c0_prid() & PRID_IMP_MASK) {
+ case PRID_IMP_NETLOGIC_XLP5XX:
+ mask = 0xff;
+ break;
+ case PRID_IMP_NETLOGIC_XLP9XX:
+ default:
+ mask = 0xfffff;
+ break;
+ }
+ } else {
+ fusemask = nlm_read_sys_reg(nodep->sysbase,
+ SYS_EFUSE_DEVICE_CFG_STATUS0);
+ switch (read_c0_prid() & PRID_IMP_MASK) {
+ case PRID_IMP_NETLOGIC_XLP3XX:
+ mask = 0xf;
+ break;
+ case PRID_IMP_NETLOGIC_XLP2XX:
+ mask = 0x3;
+ break;
+ case PRID_IMP_NETLOGIC_XLP8XX:
+ default:
+ mask = 0xff;
+ break;
+ }
+ }
+
+ /*
+ * Fused out cores are set in the fusemask, and the remaining
+ * cores are renumbered to range 0 .. nactive-1
+ */
+ syscoremask = (1 << hweight32(~fusemask & mask)) - 1;
+
+ pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask);
+ ncores = nlm_cores_per_node();
+ for (core = 0; core < ncores; core++) {
+ /* we will be on node 0 core 0 */
+ if (n == 0 && core == 0)
+ continue;
+
+ /* see if the core exists */
+ if ((syscoremask & (1 << core)) == 0)
+ continue;
+
+ /* see if at least the first hw thread is enabled */
+ cpu = (n * ncores + core) * NLM_THREADS_PER_CORE;
+ if (!cpumask_test_cpu(cpu, wakeup_mask))
+ continue;
+
+ /* wake up the core */
+ if (!xlp_wakeup_core(nodep->sysbase, n, core))
+ continue;
+
+ /* core is up */
+ nodep->coremask |= 1u << core;
+
+ /* spin until the hw threads sets their ready */
+ if (!wait_for_cpus(cpu, 0))
+ pr_err("Node %d : timeout core %d\n", n, core);
+ }
+ }
+}
+
+void xlp_wakeup_secondary_cpus()
+{
+ /*
+ * In case of u-boot, the secondaries are in reset
+ * first wakeup core 0 threads
+ */
+ xlp_boot_core0_siblings();
+ if (!wait_for_cpus(0, 0))
+ pr_err("Node 0 : timeout core 0\n");
+
+ /* now get other cores out of reset */
+ xlp_enable_secondary_cores(&nlm_cpumask);
+}