Initial import

1 files changed, 257 insertions, 0 deletions

diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
new file mode 100644
index 000000000..8b117e638
--- /dev/null
+++ b/arch/mips/pci/pci-lantiq.c
@@ -0,0 +1,257 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+
+#include <asm/pci.h>
+#include <asm/gpio.h>
+#include <asm/addrspace.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_irq.h>
+
+#include "pci-lantiq.h"
+
+#define PCI_CR_FCI_ADDR_MAP0		0x00C0
+#define PCI_CR_FCI_ADDR_MAP1		0x00C4
+#define PCI_CR_FCI_ADDR_MAP2		0x00C8
+#define PCI_CR_FCI_ADDR_MAP3		0x00CC
+#define PCI_CR_FCI_ADDR_MAP4		0x00D0
+#define PCI_CR_FCI_ADDR_MAP5		0x00D4
+#define PCI_CR_FCI_ADDR_MAP6		0x00D8
+#define PCI_CR_FCI_ADDR_MAP7		0x00DC
+#define PCI_CR_CLK_CTRL			0x0000
+#define PCI_CR_PCI_MOD			0x0030
+#define PCI_CR_PC_ARB			0x0080
+#define PCI_CR_FCI_ADDR_MAP11hg		0x00E4
+#define PCI_CR_BAR11MASK		0x0044
+#define PCI_CR_BAR12MASK		0x0048
+#define PCI_CR_BAR13MASK		0x004C
+#define PCI_CS_BASE_ADDR1		0x0010
+#define PCI_CR_PCI_ADDR_MAP11		0x0064
+#define PCI_CR_FCI_BURST_LENGTH		0x00E8
+#define PCI_CR_PCI_EOI			0x002C
+#define PCI_CS_STS_CMD			0x0004
+
+#define PCI_MASTER0_REQ_MASK_2BITS	8
+#define PCI_MASTER1_REQ_MASK_2BITS	10
+#define PCI_MASTER2_REQ_MASK_2BITS	12
+#define INTERNAL_ARB_ENABLE_BIT		0
+
+#define LTQ_CGU_IFCCR		0x0018
+#define LTQ_CGU_PCICR		0x0034
+
+#define ltq_pci_w32(x, y)	ltq_w32((x), ltq_pci_membase + (y))
+#define ltq_pci_r32(x)		ltq_r32(ltq_pci_membase + (x))
+
+#define ltq_pci_cfg_w32(x, y)	ltq_w32((x), ltq_pci_mapped_cfg + (y))
+#define ltq_pci_cfg_r32(x)	ltq_r32(ltq_pci_mapped_cfg + (x))
+
+__iomem void *ltq_pci_mapped_cfg;
+static __iomem void *ltq_pci_membase;
+
+static int reset_gpio;
+static struct clk *clk_pci, *clk_external;
+static struct resource pci_io_resource;
+static struct resource pci_mem_resource;
+static struct pci_ops pci_ops = {
+	.read	= ltq_pci_read_config_dword,
+	.write	= ltq_pci_write_config_dword
+};
+
+static struct pci_controller pci_controller = {
+	.pci_ops	= &pci_ops,
+	.mem_resource	= &pci_mem_resource,
+	.mem_offset	= 0x00000000UL,
+	.io_resource	= &pci_io_resource,
+	.io_offset	= 0x00000000UL,
+};
+
+static inline u32 ltq_calc_bar11mask(void)
+{
+	u32 mem, bar11mask;
+
+	/* BAR11MASK value depends on available memory on system. */
+	mem = get_num_physpages() * PAGE_SIZE;
+	bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
+
+	return bar11mask;
+}
+
+static int ltq_pci_startup(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	const __be32 *req_mask, *bus_clk;
+	u32 temp_buffer;
+
+	/* get our clocks */
+	clk_pci = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk_pci)) {
+		dev_err(&pdev->dev, "failed to get pci clock\n");
+		return PTR_ERR(clk_pci);
+	}
+
+	clk_external = clk_get(&pdev->dev, "external");
+	if (IS_ERR(clk_external)) {
+		clk_put(clk_pci);
+		dev_err(&pdev->dev, "failed to get external pci clock\n");
+		return PTR_ERR(clk_external);
+	}
+
+	/* read the bus speed that we want */
+	bus_clk = of_get_property(node, "lantiq,bus-clock", NULL);
+	if (bus_clk)
+		clk_set_rate(clk_pci, *bus_clk);
+
+	/* and enable the clocks */
+	clk_enable(clk_pci);
+	if (of_find_property(node, "lantiq,external-clock", NULL))
+		clk_enable(clk_external);
+	else
+		clk_disable(clk_external);
+
+	/* setup reset gpio used by pci */
+	reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
+	if (gpio_is_valid(reset_gpio)) {
+		int ret = devm_gpio_request(&pdev->dev,
+						reset_gpio, "pci-reset");
+		if (ret) {
+			dev_err(&pdev->dev,
+				"failed to request gpio %d\n", reset_gpio);
+			return ret;
+		}
+		gpio_direction_output(reset_gpio, 1);
+	}
+
+	/* enable auto-switching between PCI and EBU */
+	ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
+
+	/* busy, i.e. configuration is not done, PCI access has to be retried */
+	ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
+	wmb();
+	/* BUS Master/IO/MEM access */
+	ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
+
+	/* enable external 2 PCI masters */
+	temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
+	/* setup the request mask */
+	req_mask = of_get_property(node, "req-mask", NULL);
+	if (req_mask)
+		temp_buffer &= ~((*req_mask & 0xf) << 16);
+	else
+		temp_buffer &= ~0xf0000;
+	/* enable internal arbiter */
+	temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
+	/* enable internal PCI master reqest */
+	temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
+
+	/* enable EBU request */
+	temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
+
+	/* enable all external masters request */
+	temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
+	ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
+	wmb();
+
+	/* setup BAR memory regions */
+	ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
+	ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
+	ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
+	ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
+	ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
+	ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
+	ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
+	ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
+	ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
+	ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
+	ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
+	ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
+	/* both TX and RX endian swap are enabled */
+	ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
+	wmb();
+	ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
+		PCI_CR_BAR12MASK);
+	ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
+		PCI_CR_BAR13MASK);
+	/*use 8 dw burst length */
+	ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
+	ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
+	wmb();
+
+	/* setup irq line */
+	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
+	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
+
+	/* toggle reset pin */
+	if (gpio_is_valid(reset_gpio)) {
+		__gpio_set_value(reset_gpio, 0);
+		wmb();
+		mdelay(1);
+		__gpio_set_value(reset_gpio, 1);
+	}
+	return 0;
+}
+
+static int ltq_pci_probe(struct platform_device *pdev)
+{
+	struct resource *res_cfg, *res_bridge;
+
+	pci_clear_flags(PCI_PROBE_ONLY);
+
+	res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge);
+	if (IS_ERR(ltq_pci_membase))
+		return PTR_ERR(ltq_pci_membase);
+
+	res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg);
+	if (IS_ERR(ltq_pci_mapped_cfg))
+		return PTR_ERR(ltq_pci_mapped_cfg);
+
+	ltq_pci_startup(pdev);
+
+	pci_load_of_ranges(&pci_controller, pdev->dev.of_node);
+	register_pci_controller(&pci_controller);
+	return 0;
+}
+
+static const struct of_device_id ltq_pci_match[] = {
+	{ .compatible = "lantiq,pci-xway" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltq_pci_match);
+
+static struct platform_driver ltq_pci_driver = {
+	.probe = ltq_pci_probe,
+	.driver = {
+		.name = "pci-xway",
+		.of_match_table = ltq_pci_match,
+	},
+};
+
+int __init pcibios_init(void)
+{
+	int ret = platform_driver_register(&ltq_pci_driver);
+	if (ret)
+		pr_info("pci-xway: Error registering platform driver!");
+	return ret;
+}
+
+arch_initcall(pcibios_init);