Initial import

1 files changed, 2091 insertions, 0 deletions

diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
new file mode 100644
index 000000000..99f3db4f0
--- /dev/null
+++ b/arch/mips/pci/pcie-octeon.c
@@ -0,0 +1,2091 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007, 2008, 2009, 2010, 2011 Cavium Networks
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-npei-defs.h>
+#include <asm/octeon/cvmx-pciercx-defs.h>
+#include <asm/octeon/cvmx-pescx-defs.h>
+#include <asm/octeon/cvmx-pexp-defs.h>
+#include <asm/octeon/cvmx-pemx-defs.h>
+#include <asm/octeon/cvmx-dpi-defs.h>
+#include <asm/octeon/cvmx-sli-defs.h>
+#include <asm/octeon/cvmx-sriox-defs.h>
+#include <asm/octeon/cvmx-helper-errata.h>
+#include <asm/octeon/pci-octeon.h>
+
+#define MRRS_CN5XXX 0 /* 128 byte Max Read Request Size */
+#define MPS_CN5XXX  0 /* 128 byte Max Packet Size (Limit of most PCs) */
+#define MRRS_CN6XXX 3 /* 1024 byte Max Read Request Size */
+#define MPS_CN6XXX  0 /* 128 byte Max Packet Size (Limit of most PCs) */
+
+/* Module parameter to disable PCI probing */
+static int pcie_disable;
+module_param(pcie_disable, int, S_IRUGO);
+
+static int enable_pcie_14459_war;
+static int enable_pcie_bus_num_war[2];
+
+union cvmx_pcie_address {
+	uint64_t u64;
+	struct {
+		uint64_t upper:2;	/* Normally 2 for XKPHYS */
+		uint64_t reserved_49_61:13;	/* Must be zero */
+		uint64_t io:1;	/* 1 for IO space access */
+		uint64_t did:5; /* PCIe DID = 3 */
+		uint64_t subdid:3;	/* PCIe SubDID = 1 */
+		uint64_t reserved_36_39:4;	/* Must be zero */
+		uint64_t es:2;	/* Endian swap = 1 */
+		uint64_t port:2;	/* PCIe port 0,1 */
+		uint64_t reserved_29_31:3;	/* Must be zero */
+		/*
+		 * Selects the type of the configuration request (0 = type 0,
+		 * 1 = type 1).
+		 */
+		uint64_t ty:1;
+		/* Target bus number sent in the ID in the request. */
+		uint64_t bus:8;
+		/*
+		 * Target device number sent in the ID in the
+		 * request. Note that Dev must be zero for type 0
+		 * configuration requests.
+		 */
+		uint64_t dev:5;
+		/* Target function number sent in the ID in the request. */
+		uint64_t func:3;
+		/*
+		 * Selects a register in the configuration space of
+		 * the target.
+		 */
+		uint64_t reg:12;
+	} config;
+	struct {
+		uint64_t upper:2;	/* Normally 2 for XKPHYS */
+		uint64_t reserved_49_61:13;	/* Must be zero */
+		uint64_t io:1;	/* 1 for IO space access */
+		uint64_t did:5; /* PCIe DID = 3 */
+		uint64_t subdid:3;	/* PCIe SubDID = 2 */
+		uint64_t reserved_36_39:4;	/* Must be zero */
+		uint64_t es:2;	/* Endian swap = 1 */
+		uint64_t port:2;	/* PCIe port 0,1 */
+		uint64_t address:32;	/* PCIe IO address */
+	} io;
+	struct {
+		uint64_t upper:2;	/* Normally 2 for XKPHYS */
+		uint64_t reserved_49_61:13;	/* Must be zero */
+		uint64_t io:1;	/* 1 for IO space access */
+		uint64_t did:5; /* PCIe DID = 3 */
+		uint64_t subdid:3;	/* PCIe SubDID = 3-6 */
+		uint64_t reserved_36_39:4;	/* Must be zero */
+		uint64_t address:36;	/* PCIe Mem address */
+	} mem;
+};
+
+static int cvmx_pcie_rc_initialize(int pcie_port);
+
+#include <dma-coherence.h>
+
+/**
+ * Return the Core virtual base address for PCIe IO access. IOs are
+ * read/written as an offset from this address.
+ *
+ * @pcie_port: PCIe port the IO is for
+ *
+ * Returns 64bit Octeon IO base address for read/write
+ */
+static inline uint64_t cvmx_pcie_get_io_base_address(int pcie_port)
+{
+	union cvmx_pcie_address pcie_addr;
+	pcie_addr.u64 = 0;
+	pcie_addr.io.upper = 0;
+	pcie_addr.io.io = 1;
+	pcie_addr.io.did = 3;
+	pcie_addr.io.subdid = 2;
+	pcie_addr.io.es = 1;
+	pcie_addr.io.port = pcie_port;
+	return pcie_addr.u64;
+}
+
+/**
+ * Size of the IO address region returned at address
+ * cvmx_pcie_get_io_base_address()
+ *
+ * @pcie_port: PCIe port the IO is for
+ *
+ * Returns Size of the IO window
+ */
+static inline uint64_t cvmx_pcie_get_io_size(int pcie_port)
+{
+	return 1ull << 32;
+}
+
+/**
+ * Return the Core virtual base address for PCIe MEM access. Memory is
+ * read/written as an offset from this address.
+ *
+ * @pcie_port: PCIe port the IO is for
+ *
+ * Returns 64bit Octeon IO base address for read/write
+ */
+static inline uint64_t cvmx_pcie_get_mem_base_address(int pcie_port)
+{
+	union cvmx_pcie_address pcie_addr;
+	pcie_addr.u64 = 0;
+	pcie_addr.mem.upper = 0;
+	pcie_addr.mem.io = 1;
+	pcie_addr.mem.did = 3;
+	pcie_addr.mem.subdid = 3 + pcie_port;
+	return pcie_addr.u64;
+}
+
+/**
+ * Size of the Mem address region returned at address
+ * cvmx_pcie_get_mem_base_address()
+ *
+ * @pcie_port: PCIe port the IO is for
+ *
+ * Returns Size of the Mem window
+ */
+static inline uint64_t cvmx_pcie_get_mem_size(int pcie_port)
+{
+	return 1ull << 36;
+}
+
+/**
+ * Read a PCIe config space register indirectly. This is used for
+ * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???.
+ *
+ * @pcie_port:	PCIe port to read from
+ * @cfg_offset: Address to read
+ *
+ * Returns Value read
+ */
+static uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset)
+{
+	if (octeon_has_feature(OCTEON_FEATURE_NPEI)) {
+		union cvmx_pescx_cfg_rd pescx_cfg_rd;
+		pescx_cfg_rd.u64 = 0;
+		pescx_cfg_rd.s.addr = cfg_offset;
+		cvmx_write_csr(CVMX_PESCX_CFG_RD(pcie_port), pescx_cfg_rd.u64);
+		pescx_cfg_rd.u64 = cvmx_read_csr(CVMX_PESCX_CFG_RD(pcie_port));
+		return pescx_cfg_rd.s.data;
+	} else {
+		union cvmx_pemx_cfg_rd pemx_cfg_rd;
+		pemx_cfg_rd.u64 = 0;
+		pemx_cfg_rd.s.addr = cfg_offset;
+		cvmx_write_csr(CVMX_PEMX_CFG_RD(pcie_port), pemx_cfg_rd.u64);
+		pemx_cfg_rd.u64 = cvmx_read_csr(CVMX_PEMX_CFG_RD(pcie_port));
+		return pemx_cfg_rd.s.data;
+	}
+}
+
+/**
+ * Write a PCIe config space register indirectly. This is used for
+ * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???.
+ *
+ * @pcie_port:	PCIe port to write to
+ * @cfg_offset: Address to write
+ * @val:	Value to write
+ */
+static void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset,
+				 uint32_t val)
+{
+	if (octeon_has_feature(OCTEON_FEATURE_NPEI)) {
+		union cvmx_pescx_cfg_wr pescx_cfg_wr;
+		pescx_cfg_wr.u64 = 0;
+		pescx_cfg_wr.s.addr = cfg_offset;
+		pescx_cfg_wr.s.data = val;
+		cvmx_write_csr(CVMX_PESCX_CFG_WR(pcie_port), pescx_cfg_wr.u64);
+	} else {
+		union cvmx_pemx_cfg_wr pemx_cfg_wr;
+		pemx_cfg_wr.u64 = 0;
+		pemx_cfg_wr.s.addr = cfg_offset;
+		pemx_cfg_wr.s.data = val;
+		cvmx_write_csr(CVMX_PEMX_CFG_WR(pcie_port), pemx_cfg_wr.u64);
+	}
+}
+
+/**
+ * Build a PCIe config space request address for a device
+ *
+ * @pcie_port: PCIe port to access
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:	       Device sub function
+ * @reg:       Register to access
+ *
+ * Returns 64bit Octeon IO address
+ */
+static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus,
+						     int dev, int fn, int reg)
+{
+	union cvmx_pcie_address pcie_addr;
+	union cvmx_pciercx_cfg006 pciercx_cfg006;
+
+	pciercx_cfg006.u32 =
+	    cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port));
+	if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0))
+		return 0;
+
+	pcie_addr.u64 = 0;
+	pcie_addr.config.upper = 2;
+	pcie_addr.config.io = 1;
+	pcie_addr.config.did = 3;
+	pcie_addr.config.subdid = 1;
+	pcie_addr.config.es = 1;
+	pcie_addr.config.port = pcie_port;
+	pcie_addr.config.ty = (bus > pciercx_cfg006.s.pbnum);
+	pcie_addr.config.bus = bus;
+	pcie_addr.config.dev = dev;
+	pcie_addr.config.func = fn;
+	pcie_addr.config.reg = reg;
+	return pcie_addr.u64;
+}
+
+/**
+ * Read 8bits from a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:	       Device sub function
+ * @reg:       Register to access
+ *
+ * Returns Result of the read
+ */
+static uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev,
+				      int fn, int reg)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		return cvmx_read64_uint8(address);
+	else
+		return 0xff;
+}
+
+/**
+ * Read 16bits from a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:	       Device sub function
+ * @reg:       Register to access
+ *
+ * Returns Result of the read
+ */
+static uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev,
+					int fn, int reg)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		return le16_to_cpu(cvmx_read64_uint16(address));
+	else
+		return 0xffff;
+}
+
+/**
+ * Read 32bits from a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:	       Device sub function
+ * @reg:       Register to access
+ *
+ * Returns Result of the read
+ */
+static uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev,
+					int fn, int reg)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		return le32_to_cpu(cvmx_read64_uint32(address));
+	else
+		return 0xffffffff;
+}
+
+/**
+ * Write 8bits to a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:	       Device sub function
+ * @reg:       Register to access
+ * @val:       Value to write
+ */
+static void cvmx_pcie_config_write8(int pcie_port, int bus, int dev, int fn,
+				    int reg, uint8_t val)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		cvmx_write64_uint8(address, val);
+}
+
+/**
+ * Write 16bits to a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:	       Device sub function
+ * @reg:       Register to access
+ * @val:       Value to write
+ */
+static void cvmx_pcie_config_write16(int pcie_port, int bus, int dev, int fn,
+				     int reg, uint16_t val)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		cvmx_write64_uint16(address, cpu_to_le16(val));
+}
+
+/**
+ * Write 32bits to a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:	       Device sub function
+ * @reg:       Register to access
+ * @val:       Value to write
+ */
+static void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn,
+				     int reg, uint32_t val)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		cvmx_write64_uint32(address, cpu_to_le32(val));
+}
+
+/**
+ * Initialize the RC config space CSRs
+ *
+ * @pcie_port: PCIe port to initialize
+ */
+static void __cvmx_pcie_rc_initialize_config_space(int pcie_port)
+{
+	union cvmx_pciercx_cfg030 pciercx_cfg030;
+	union cvmx_pciercx_cfg070 pciercx_cfg070;
+	union cvmx_pciercx_cfg001 pciercx_cfg001;
+	union cvmx_pciercx_cfg032 pciercx_cfg032;
+	union cvmx_pciercx_cfg006 pciercx_cfg006;
+	union cvmx_pciercx_cfg008 pciercx_cfg008;
+	union cvmx_pciercx_cfg009 pciercx_cfg009;
+	union cvmx_pciercx_cfg010 pciercx_cfg010;
+	union cvmx_pciercx_cfg011 pciercx_cfg011;
+	union cvmx_pciercx_cfg035 pciercx_cfg035;
+	union cvmx_pciercx_cfg075 pciercx_cfg075;
+	union cvmx_pciercx_cfg034 pciercx_cfg034;
+
+	/* Max Payload Size (PCIE*_CFG030[MPS]) */
+	/* Max Read Request Size (PCIE*_CFG030[MRRS]) */
+	/* Relaxed-order, no-snoop enables (PCIE*_CFG030[RO_EN,NS_EN] */
+	/* Error Message Enables (PCIE*_CFG030[CE_EN,NFE_EN,FE_EN,UR_EN]) */
+
+	pciercx_cfg030.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG030(pcie_port));
+	if (OCTEON_IS_MODEL(OCTEON_CN5XXX)) {
+		pciercx_cfg030.s.mps = MPS_CN5XXX;
+		pciercx_cfg030.s.mrrs = MRRS_CN5XXX;
+	} else {
+		pciercx_cfg030.s.mps = MPS_CN6XXX;
+		pciercx_cfg030.s.mrrs = MRRS_CN6XXX;
+	}
+	/*
+	 * Enable relaxed order processing. This will allow devices to
+	 * affect read response ordering.
+	 */
+	pciercx_cfg030.s.ro_en = 1;
+	/* Enable no snoop processing. Not used by Octeon */
+	pciercx_cfg030.s.ns_en = 1;
+	/* Correctable error reporting enable. */
+	pciercx_cfg030.s.ce_en = 1;
+	/* Non-fatal error reporting enable. */
+	pciercx_cfg030.s.nfe_en = 1;
+	/* Fatal error reporting enable. */
+	pciercx_cfg030.s.fe_en = 1;
+	/* Unsupported request reporting enable. */
+	pciercx_cfg030.s.ur_en = 1;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG030(pcie_port), pciercx_cfg030.u32);
+
+
+	if (octeon_has_feature(OCTEON_FEATURE_NPEI)) {
+		union cvmx_npei_ctl_status2 npei_ctl_status2;
+		/*
+		 * Max Payload Size (NPEI_CTL_STATUS2[MPS]) must match
+		 * PCIE*_CFG030[MPS].  Max Read Request Size
+		 * (NPEI_CTL_STATUS2[MRRS]) must not exceed
+		 * PCIE*_CFG030[MRRS]
+		 */
+		npei_ctl_status2.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS2);
+		/* Max payload size = 128 bytes for best Octeon DMA performance */
+		npei_ctl_status2.s.mps = MPS_CN5XXX;
+		/* Max read request size = 128 bytes for best Octeon DMA performance */
+		npei_ctl_status2.s.mrrs = MRRS_CN5XXX;
+		if (pcie_port)
+			npei_ctl_status2.s.c1_b1_s = 3; /* Port1 BAR1 Size 256MB */
+		else
+			npei_ctl_status2.s.c0_b1_s = 3; /* Port0 BAR1 Size 256MB */
+
+		cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64);
+	} else {
+		/*
+		 * Max Payload Size (DPI_SLI_PRTX_CFG[MPS]) must match
+		 * PCIE*_CFG030[MPS].  Max Read Request Size
+		 * (DPI_SLI_PRTX_CFG[MRRS]) must not exceed
+		 * PCIE*_CFG030[MRRS].
+		 */
+		union cvmx_dpi_sli_prtx_cfg prt_cfg;
+		union cvmx_sli_s2m_portx_ctl sli_s2m_portx_ctl;
+		prt_cfg.u64 = cvmx_read_csr(CVMX_DPI_SLI_PRTX_CFG(pcie_port));
+		prt_cfg.s.mps = MPS_CN6XXX;
+		prt_cfg.s.mrrs = MRRS_CN6XXX;
+		/* Max outstanding load request. */
+		prt_cfg.s.molr = 32;
+		cvmx_write_csr(CVMX_DPI_SLI_PRTX_CFG(pcie_port), prt_cfg.u64);
+
+		sli_s2m_portx_ctl.u64 = cvmx_read_csr(CVMX_PEXP_SLI_S2M_PORTX_CTL(pcie_port));
+		sli_s2m_portx_ctl.s.mrrs = MRRS_CN6XXX;
+		cvmx_write_csr(CVMX_PEXP_SLI_S2M_PORTX_CTL(pcie_port), sli_s2m_portx_ctl.u64);
+	}
+
+	/* ECRC Generation (PCIE*_CFG070[GE,CE]) */
+	pciercx_cfg070.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG070(pcie_port));
+	pciercx_cfg070.s.ge = 1;	/* ECRC generation enable. */
+	pciercx_cfg070.s.ce = 1;	/* ECRC check enable. */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG070(pcie_port), pciercx_cfg070.u32);
+
+	/*
+	 * Access Enables (PCIE*_CFG001[MSAE,ME])
+	 * ME and MSAE should always be set.
+	 * Interrupt Disable (PCIE*_CFG001[I_DIS])
+	 * System Error Message Enable (PCIE*_CFG001[SEE])
+	 */
+	pciercx_cfg001.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG001(pcie_port));
+	pciercx_cfg001.s.msae = 1;	/* Memory space enable. */
+	pciercx_cfg001.s.me = 1;	/* Bus master enable. */
+	pciercx_cfg001.s.i_dis = 1;	/* INTx assertion disable. */
+	pciercx_cfg001.s.see = 1;	/* SERR# enable */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG001(pcie_port), pciercx_cfg001.u32);
+
+	/* Advanced Error Recovery Message Enables */
+	/* (PCIE*_CFG066,PCIE*_CFG067,PCIE*_CFG069) */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG066(pcie_port), 0);
+	/* Use CVMX_PCIERCX_CFG067 hardware default */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG069(pcie_port), 0);
+
+
+	/* Active State Power Management (PCIE*_CFG032[ASLPC]) */
+	pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
+	pciercx_cfg032.s.aslpc = 0; /* Active state Link PM control. */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG032(pcie_port), pciercx_cfg032.u32);
+
+	/*
+	 * Link Width Mode (PCIERCn_CFG452[LME]) - Set during
+	 * cvmx_pcie_rc_initialize_link()
+	 *
+	 * Primary Bus Number (PCIERCn_CFG006[PBNUM])
+	 *
+	 * We set the primary bus number to 1 so IDT bridges are
+	 * happy. They don't like zero.
+	 */
+	pciercx_cfg006.u32 = 0;
+	pciercx_cfg006.s.pbnum = 1;
+	pciercx_cfg006.s.sbnum = 1;
+	pciercx_cfg006.s.subbnum = 1;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG006(pcie_port), pciercx_cfg006.u32);
+
+
+	/*
+	 * Memory-mapped I/O BAR (PCIERCn_CFG008)
+	 * Most applications should disable the memory-mapped I/O BAR by
+	 * setting PCIERCn_CFG008[ML_ADDR] < PCIERCn_CFG008[MB_ADDR]
+	 */
+	pciercx_cfg008.u32 = 0;
+	pciercx_cfg008.s.mb_addr = 0x100;
+	pciercx_cfg008.s.ml_addr = 0;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG008(pcie_port), pciercx_cfg008.u32);
+
+
+	/*
+	 * Prefetchable BAR (PCIERCn_CFG009,PCIERCn_CFG010,PCIERCn_CFG011)
+	 * Most applications should disable the prefetchable BAR by setting
+	 * PCIERCn_CFG011[UMEM_LIMIT],PCIERCn_CFG009[LMEM_LIMIT] <
+	 * PCIERCn_CFG010[UMEM_BASE],PCIERCn_CFG009[LMEM_BASE]
+	 */
+	pciercx_cfg009.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG009(pcie_port));
+	pciercx_cfg010.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG010(pcie_port));
+	pciercx_cfg011.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG011(pcie_port));
+	pciercx_cfg009.s.lmem_base = 0x100;
+	pciercx_cfg009.s.lmem_limit = 0;
+	pciercx_cfg010.s.umem_base = 0x100;
+	pciercx_cfg011.s.umem_limit = 0;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG009(pcie_port), pciercx_cfg009.u32);
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG010(pcie_port), pciercx_cfg010.u32);
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG011(pcie_port), pciercx_cfg011.u32);
+
+	/*
+	 * System Error Interrupt Enables (PCIERCn_CFG035[SECEE,SEFEE,SENFEE])
+	 * PME Interrupt Enables (PCIERCn_CFG035[PMEIE])
+	*/
+	pciercx_cfg035.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG035(pcie_port));
+	pciercx_cfg035.s.secee = 1; /* System error on correctable error enable. */
+	pciercx_cfg035.s.sefee = 1; /* System error on fatal error enable. */
+	pciercx_cfg035.s.senfee = 1; /* System error on non-fatal error enable. */
+	pciercx_cfg035.s.pmeie = 1; /* PME interrupt enable. */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG035(pcie_port), pciercx_cfg035.u32);
+
+	/*
+	 * Advanced Error Recovery Interrupt Enables
+	 * (PCIERCn_CFG075[CERE,NFERE,FERE])
+	 */
+	pciercx_cfg075.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG075(pcie_port));
+	pciercx_cfg075.s.cere = 1; /* Correctable error reporting enable. */
+	pciercx_cfg075.s.nfere = 1; /* Non-fatal error reporting enable. */
+	pciercx_cfg075.s.fere = 1; /* Fatal error reporting enable. */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG075(pcie_port), pciercx_cfg075.u32);
+
+	/*
+	 * HP Interrupt Enables (PCIERCn_CFG034[HPINT_EN],
+	 * PCIERCn_CFG034[DLLS_EN,CCINT_EN])
+	 */
+	pciercx_cfg034.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG034(pcie_port));
+	pciercx_cfg034.s.hpint_en = 1; /* Hot-plug interrupt enable. */
+	pciercx_cfg034.s.dlls_en = 1; /* Data Link Layer state changed enable */
+	pciercx_cfg034.s.ccint_en = 1; /* Command completed interrupt enable. */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG034(pcie_port), pciercx_cfg034.u32);
+}
+
+/**
+ * Initialize a host mode PCIe gen 1 link. This function takes a PCIe
+ * port from reset to a link up state. Software can then begin
+ * configuring the rest of the link.
+ *
+ * @pcie_port: PCIe port to initialize
+ *
+ * Returns Zero on success
+ */
+static int __cvmx_pcie_rc_initialize_link_gen1(int pcie_port)
+{
+	uint64_t start_cycle;
+	union cvmx_pescx_ctl_status pescx_ctl_status;
+	union cvmx_pciercx_cfg452 pciercx_cfg452;
+	union cvmx_pciercx_cfg032 pciercx_cfg032;
+	union cvmx_pciercx_cfg448 pciercx_cfg448;
+
+	/* Set the lane width */
+	pciercx_cfg452.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG452(pcie_port));
+	pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port));
+	if (pescx_ctl_status.s.qlm_cfg == 0)
+		/* We're in 8 lane (56XX) or 4 lane (54XX) mode */
+		pciercx_cfg452.s.lme = 0xf;
+	else
+		/* We're in 4 lane (56XX) or 2 lane (52XX) mode */
+		pciercx_cfg452.s.lme = 0x7;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG452(pcie_port), pciercx_cfg452.u32);
+
+	/*
+	 * CN52XX pass 1.x has an errata where length mismatches on UR
+	 * responses can cause bus errors on 64bit memory
+	 * reads. Turning off length error checking fixes this.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
+		union cvmx_pciercx_cfg455 pciercx_cfg455;
+		pciercx_cfg455.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG455(pcie_port));
+		pciercx_cfg455.s.m_cpl_len_err = 1;
+		cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG455(pcie_port), pciercx_cfg455.u32);
+	}
+
+	/* Lane swap needs to be manually enabled for CN52XX */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX) && (pcie_port == 1)) {
+		pescx_ctl_status.s.lane_swp = 1;
+		cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), pescx_ctl_status.u64);
+	}
+
+	/* Bring up the link */
+	pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port));
+	pescx_ctl_status.s.lnk_enb = 1;
+	cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), pescx_ctl_status.u64);
+
+	/*
+	 * CN52XX pass 1.0: Due to a bug in 2nd order CDR, it needs to
+	 * be disabled.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0))
+		__cvmx_helper_errata_qlm_disable_2nd_order_cdr(0);
+
+	/* Wait for the link to come up */
+	start_cycle = cvmx_get_cycle();
+	do {
+		if (cvmx_get_cycle() - start_cycle > 2 * octeon_get_clock_rate()) {
+			cvmx_dprintf("PCIe: Port %d link timeout\n", pcie_port);
+			return -1;
+		}
+		cvmx_wait(10000);
+		pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
+	} while (pciercx_cfg032.s.dlla == 0);
+
+	/* Clear all pending errors */
+	cvmx_write_csr(CVMX_PEXP_NPEI_INT_SUM, cvmx_read_csr(CVMX_PEXP_NPEI_INT_SUM));
+
+	/*
+	 * Update the Replay Time Limit. Empirically, some PCIe
+	 * devices take a little longer to respond than expected under
+	 * load. As a workaround for this we configure the Replay Time
+	 * Limit to the value expected for a 512 byte MPS instead of
+	 * our actual 256 byte MPS. The numbers below are directly
+	 * from the PCIe spec table 3-4.
+	 */
+	pciercx_cfg448.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG448(pcie_port));
+	switch (pciercx_cfg032.s.nlw) {
+	case 1:		/* 1 lane */
+		pciercx_cfg448.s.rtl = 1677;
+		break;
+	case 2:		/* 2 lanes */
+		pciercx_cfg448.s.rtl = 867;
+		break;
+	case 4:		/* 4 lanes */
+		pciercx_cfg448.s.rtl = 462;
+		break;
+	case 8:		/* 8 lanes */
+		pciercx_cfg448.s.rtl = 258;
+		break;
+	}
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG448(pcie_port), pciercx_cfg448.u32);
+
+	return 0;
+}
+
+static void __cvmx_increment_ba(union cvmx_sli_mem_access_subidx *pmas)
+{
+	if (OCTEON_IS_MODEL(OCTEON_CN68XX))
+		pmas->cn68xx.ba++;
+	else
+		pmas->cn63xx.ba++;
+}
+
+/**
+ * Initialize a PCIe gen 1 port for use in host(RC) mode. It doesn't
+ * enumerate the bus.
+ *
+ * @pcie_port: PCIe port to initialize
+ *
+ * Returns Zero on success
+ */
+static int __cvmx_pcie_rc_initialize_gen1(int pcie_port)
+{
+	int i;
+	int base;
+	u64 addr_swizzle;
+	union cvmx_ciu_soft_prst ciu_soft_prst;
+	union cvmx_pescx_bist_status pescx_bist_status;
+	union cvmx_pescx_bist_status2 pescx_bist_status2;
+	union cvmx_npei_ctl_status npei_ctl_status;
+	union cvmx_npei_mem_access_ctl npei_mem_access_ctl;
+	union cvmx_npei_mem_access_subidx mem_access_subid;
+	union cvmx_npei_dbg_data npei_dbg_data;
+	union cvmx_pescx_ctl_status2 pescx_ctl_status2;
+	union cvmx_pciercx_cfg032 pciercx_cfg032;
+	union cvmx_npei_bar1_indexx bar1_index;
+
+retry:
+	/*
+	 * Make sure we aren't trying to setup a target mode interface
+	 * in host mode.
+	 */
+	npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS);
+	if ((pcie_port == 0) && !npei_ctl_status.s.host_mode) {
+		cvmx_dprintf("PCIe: Port %d in endpoint mode\n", pcie_port);
+		return -1;
+	}
+
+	/*
+	 * Make sure a CN52XX isn't trying to bring up port 1 when it
+	 * is disabled.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX)) {
+		npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA);
+		if ((pcie_port == 1) && npei_dbg_data.cn52xx.qlm0_link_width) {
+			cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() called on port1, but port1 is disabled\n");
+			return -1;
+		}
+	}
+
+	/*
+	 * PCIe switch arbitration mode. '0' == fixed priority NPEI,
+	 * PCIe0, then PCIe1. '1' == round robin.
+	 */
+	npei_ctl_status.s.arb = 1;
+	/* Allow up to 0x20 config retries */
+	npei_ctl_status.s.cfg_rtry = 0x20;
+	/*
+	 * CN52XX pass1.x has an errata where P0_NTAGS and P1_NTAGS
+	 * don't reset.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
+		npei_ctl_status.s.p0_ntags = 0x20;
+		npei_ctl_status.s.p1_ntags = 0x20;
+	}
+	cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS, npei_ctl_status.u64);
+
+	/* Bring the PCIe out of reset */
+	if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBH5200) {
+		/*
+		 * The EBH5200 board swapped the PCIe reset lines on
+		 * the board. As a workaround for this bug, we bring
+		 * both PCIe ports out of reset at the same time
+		 * instead of on separate calls. So for port 0, we
+		 * bring both out of reset and do nothing on port 1
+		 */
+		if (pcie_port == 0) {
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+			/*
+			 * After a chip reset the PCIe will also be in
+			 * reset. If it isn't, most likely someone is
+			 * trying to init it again without a proper
+			 * PCIe reset.
+			 */
+			if (ciu_soft_prst.s.soft_prst == 0) {
+				/* Reset the ports */
+				ciu_soft_prst.s.soft_prst = 1;
+				cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64);
+				ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
+				ciu_soft_prst.s.soft_prst = 1;
+				cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64);
+				/* Wait until pcie resets the ports. */
+				udelay(2000);
+			}
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
+			ciu_soft_prst.s.soft_prst = 0;
+			cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64);
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+			ciu_soft_prst.s.soft_prst = 0;
+			cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64);
+		}
+	} else {
+		/*
+		 * The normal case: The PCIe ports are completely
+		 * separate and can be brought out of reset
+		 * independently.
+		 */
+		if (pcie_port)
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
+		else
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+		/*
+		 * After a chip reset the PCIe will also be in
+		 * reset. If it isn't, most likely someone is trying
+		 * to init it again without a proper PCIe reset.
+		 */
+		if (ciu_soft_prst.s.soft_prst == 0) {
+			/* Reset the port */
+			ciu_soft_prst.s.soft_prst = 1;
+			if (pcie_port)
+				cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64);
+			else
+				cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64);
+			/* Wait until pcie resets the ports. */
+			udelay(2000);
+		}
+		if (pcie_port) {
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
+			ciu_soft_prst.s.soft_prst = 0;
+			cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64);
+		} else {
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+			ciu_soft_prst.s.soft_prst = 0;
+			cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64);
+		}
+	}
+
+	/*
+	 * Wait for PCIe reset to complete. Due to errata PCIE-700, we
+	 * don't poll PESCX_CTL_STATUS2[PCIERST], but simply wait a
+	 * fixed number of cycles.
+	 */
+	cvmx_wait(400000);
+
+	/*
+	 * PESCX_BIST_STATUS2[PCLK_RUN] was missing on pass 1 of
+	 * CN56XX and CN52XX, so we only probe it on newer chips
+	 */
+	if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
+		/* Clear PCLK_RUN so we can check if the clock is running */
+		pescx_ctl_status2.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port));
+		pescx_ctl_status2.s.pclk_run = 1;
+		cvmx_write_csr(CVMX_PESCX_CTL_STATUS2(pcie_port), pescx_ctl_status2.u64);
+		/* Now that we cleared PCLK_RUN, wait for it to be set
+		 * again telling us the clock is running
+		 */
+		if (CVMX_WAIT_FOR_FIELD64(CVMX_PESCX_CTL_STATUS2(pcie_port),
+					  union cvmx_pescx_ctl_status2, pclk_run, ==, 1, 10000)) {
+			cvmx_dprintf("PCIe: Port %d isn't clocked, skipping.\n", pcie_port);
+			return -1;
+		}
+	}
+
+	/*
+	 * Check and make sure PCIe came out of reset. If it doesn't
+	 * the board probably hasn't wired the clocks up and the
+	 * interface should be skipped.
+	 */
+	pescx_ctl_status2.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port));
+	if (pescx_ctl_status2.s.pcierst) {
+		cvmx_dprintf("PCIe: Port %d stuck in reset, skipping.\n", pcie_port);
+		return -1;
+	}
+
+	/*
+	 * Check BIST2 status. If any bits are set skip this
+	 * interface. This is an attempt to catch PCIE-813 on pass 1
+	 * parts.
+	 */
+	pescx_bist_status2.u64 = cvmx_read_csr(CVMX_PESCX_BIST_STATUS2(pcie_port));
+	if (pescx_bist_status2.u64) {
+		cvmx_dprintf("PCIe: Port %d BIST2 failed. Most likely this port isn't hooked up, skipping.\n",
+			     pcie_port);
+		return -1;
+	}
+
+	/* Check BIST status */
+	pescx_bist_status.u64 = cvmx_read_csr(CVMX_PESCX_BIST_STATUS(pcie_port));
+	if (pescx_bist_status.u64)
+		cvmx_dprintf("PCIe: BIST FAILED for port %d (0x%016llx)\n",
+			     pcie_port, CAST64(pescx_bist_status.u64));
+
+	/* Initialize the config space CSRs */
+	__cvmx_pcie_rc_initialize_config_space(pcie_port);
+
+	/* Bring the link up */
+	if (__cvmx_pcie_rc_initialize_link_gen1(pcie_port)) {
+		cvmx_dprintf("PCIe: Failed to initialize port %d, probably the slot is empty\n",
+			     pcie_port);
+		return -1;
+	}
+
+	/* Store merge control (NPEI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */
+	npei_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL);
+	npei_mem_access_ctl.s.max_word = 0;	/* Allow 16 words to combine */
+	npei_mem_access_ctl.s.timer = 127;	/* Wait up to 127 cycles for more data */
+	cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL, npei_mem_access_ctl.u64);
+
+	/* Setup Mem access SubDIDs */
+	mem_access_subid.u64 = 0;
+	mem_access_subid.s.port = pcie_port; /* Port the request is sent to. */
+	mem_access_subid.s.nmerge = 1;	/* Due to an errata on pass 1 chips, no merging is allowed. */
+	mem_access_subid.s.esr = 1;	/* Endian-swap for Reads. */
+	mem_access_subid.s.esw = 1;	/* Endian-swap for Writes. */
+	mem_access_subid.s.nsr = 0;	/* Enable Snooping for Reads. Octeon doesn't care, but devices might want this more conservative setting */
+	mem_access_subid.s.nsw = 0;	/* Enable Snoop for Writes. */
+	mem_access_subid.s.ror = 0;	/* Disable Relaxed Ordering for Reads. */
+	mem_access_subid.s.row = 0;	/* Disable Relaxed Ordering for Writes. */
+	mem_access_subid.s.ba = 0;	/* PCIe Adddress Bits <63:34>. */
+
+	/*
+	 * Setup mem access 12-15 for port 0, 16-19 for port 1,
+	 * supplying 36 bits of address space.
+	 */
+	for (i = 12 + pcie_port * 4; i < 16 + pcie_port * 4; i++) {
+		cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_SUBIDX(i), mem_access_subid.u64);
+		mem_access_subid.s.ba += 1; /* Set each SUBID to extend the addressable range */
+	}
+
+	/*
+	 * Disable the peer to peer forwarding register. This must be
+	 * setup by the OS after it enumerates the bus and assigns
+	 * addresses to the PCIe busses.
+	 */
+	for (i = 0; i < 4; i++) {
+		cvmx_write_csr(CVMX_PESCX_P2P_BARX_START(i, pcie_port), -1);
+		cvmx_write_csr(CVMX_PESCX_P2P_BARX_END(i, pcie_port), -1);
+	}
+
+	/* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */
+	cvmx_write_csr(CVMX_PESCX_P2N_BAR0_START(pcie_port), 0);
+
+	/* BAR1 follows BAR2 with a gap so it has the same address as for gen2. */
+	cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), CVMX_PCIE_BAR1_RC_BASE);
+
+	bar1_index.u32 = 0;
+	bar1_index.s.addr_idx = (CVMX_PCIE_BAR1_PHYS_BASE >> 22);
+	bar1_index.s.ca = 1;	   /* Not Cached */
+	bar1_index.s.end_swp = 1;  /* Endian Swap mode */
+	bar1_index.s.addr_v = 1;   /* Valid entry */
+
+	base = pcie_port ? 16 : 0;
+
+	/* Big endian swizzle for 32-bit PEXP_NCB register. */
+#ifdef __MIPSEB__
+	addr_swizzle = 4;
+#else
+	addr_swizzle = 0;
+#endif
+	for (i = 0; i < 16; i++) {
+		cvmx_write64_uint32((CVMX_PEXP_NPEI_BAR1_INDEXX(base) ^ addr_swizzle),
+				    bar1_index.u32);
+		base++;
+		/* 256MB / 16 >> 22 == 4 */
+		bar1_index.s.addr_idx += (((1ull << 28) / 16ull) >> 22);
+	}
+
+	/*
+	 * Set Octeon's BAR2 to decode 0-2^39. Bar0 and Bar1 take
+	 * precedence where they overlap. It also overlaps with the
+	 * device addresses, so make sure the peer to peer forwarding
+	 * is set right.
+	 */
+	cvmx_write_csr(CVMX_PESCX_P2N_BAR2_START(pcie_port), 0);
+
+	/*
+	 * Setup BAR2 attributes
+	 *
+	 * Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM])
+	 * - PTLP_RO,CTLP_RO should normally be set (except for debug).
+	 * - WAIT_COM=0 will likely work for all applications.
+	 *
+	 * Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]).
+	 */
+	if (pcie_port) {
+		union cvmx_npei_ctl_port1 npei_ctl_port;
+		npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT1);
+		npei_ctl_port.s.bar2_enb = 1;
+		npei_ctl_port.s.bar2_esx = 1;
+		npei_ctl_port.s.bar2_cax = 0;
+		npei_ctl_port.s.ptlp_ro = 1;
+		npei_ctl_port.s.ctlp_ro = 1;
+		npei_ctl_port.s.wait_com = 0;
+		npei_ctl_port.s.waitl_com = 0;
+		cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT1, npei_ctl_port.u64);
+	} else {
+		union cvmx_npei_ctl_port0 npei_ctl_port;
+		npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT0);
+		npei_ctl_port.s.bar2_enb = 1;
+		npei_ctl_port.s.bar2_esx = 1;
+		npei_ctl_port.s.bar2_cax = 0;
+		npei_ctl_port.s.ptlp_ro = 1;
+		npei_ctl_port.s.ctlp_ro = 1;
+		npei_ctl_port.s.wait_com = 0;
+		npei_ctl_port.s.waitl_com = 0;
+		cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT0, npei_ctl_port.u64);
+	}
+
+	/*
+	 * Both pass 1 and pass 2 of CN52XX and CN56XX have an errata
+	 * that causes TLP ordering to not be preserved after multiple
+	 * PCIe port resets. This code detects this fault and corrects
+	 * it by aligning the TLP counters properly. Another link
+	 * reset is then performed. See PCIE-13340
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS2_X) ||
+	    OCTEON_IS_MODEL(OCTEON_CN52XX_PASS2_X) ||
+	    OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) ||
+	    OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
+		union cvmx_npei_dbg_data dbg_data;
+		int old_in_fif_p_count;
+		int in_fif_p_count;
+		int out_p_count;
+		int in_p_offset = (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) ? 4 : 1;
+		int i;
+
+		/*
+		 * Choose a write address of 1MB. It should be
+		 * harmless as all bars haven't been setup.
+		 */
+		uint64_t write_address = (cvmx_pcie_get_mem_base_address(pcie_port) + 0x100000) | (1ull<<63);
+
+		/*
+		 * Make sure at least in_p_offset have been executed before we try and
+		 * read in_fif_p_count
+		 */
+		i = in_p_offset;
+		while (i--) {
+			cvmx_write64_uint32(write_address, 0);
+			cvmx_wait(10000);
+		}
+
+		/*
+		 * Read the IN_FIF_P_COUNT from the debug
+		 * select. IN_FIF_P_COUNT can be unstable sometimes so
+		 * read it twice with a write between the reads.  This
+		 * way we can tell the value is good as it will
+		 * increment by one due to the write
+		 */
+		cvmx_write_csr(CVMX_PEXP_NPEI_DBG_SELECT, (pcie_port) ? 0xd7fc : 0xcffc);
+		cvmx_read_csr(CVMX_PEXP_NPEI_DBG_SELECT);
+		do {
+			dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA);
+			old_in_fif_p_count = dbg_data.s.data & 0xff;
+			cvmx_write64_uint32(write_address, 0);
+			cvmx_wait(10000);
+			dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA);
+			in_fif_p_count = dbg_data.s.data & 0xff;
+		} while (in_fif_p_count != ((old_in_fif_p_count+1) & 0xff));
+
+		/* Update in_fif_p_count for it's offset with respect to out_p_count */
+		in_fif_p_count = (in_fif_p_count + in_p_offset) & 0xff;
+
+		/* Read the OUT_P_COUNT from the debug select */
+		cvmx_write_csr(CVMX_PEXP_NPEI_DBG_SELECT, (pcie_port) ? 0xd00f : 0xc80f);
+		cvmx_read_csr(CVMX_PEXP_NPEI_DBG_SELECT);
+		dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA);
+		out_p_count = (dbg_data.s.data>>1) & 0xff;
+
+		/* Check that the two counters are aligned */
+		if (out_p_count != in_fif_p_count) {
+			cvmx_dprintf("PCIe: Port %d aligning TLP counters as workaround to maintain ordering\n", pcie_port);
+			while (in_fif_p_count != 0) {
+				cvmx_write64_uint32(write_address, 0);
+				cvmx_wait(10000);
+				in_fif_p_count = (in_fif_p_count + 1) & 0xff;
+			}
+			/*
+			 * The EBH5200 board swapped the PCIe reset
+			 * lines on the board. This means we must
+			 * bring both links down and up, which will
+			 * cause the PCIe0 to need alignment
+			 * again. Lots of messages will be displayed,
+			 * but everything should work
+			 */
+			if ((cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBH5200) &&
+				(pcie_port == 1))
+				cvmx_pcie_rc_initialize(0);
+			/* Rety bringing this port up */
+			goto retry;
+		}
+	}
+
+	/* Display the link status */
+	pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
+	cvmx_dprintf("PCIe: Port %d link active, %d lanes\n", pcie_port, pciercx_cfg032.s.nlw);
+
+	return 0;
+}
+
+/**
+  * Initialize a host mode PCIe gen 2 link. This function takes a PCIe
+ * port from reset to a link up state. Software can then begin
+ * configuring the rest of the link.
+ *
+ * @pcie_port: PCIe port to initialize
+ *
+ * Return Zero on success.
+ */
+static int __cvmx_pcie_rc_initialize_link_gen2(int pcie_port)
+{
+	uint64_t start_cycle;
+	union cvmx_pemx_ctl_status pem_ctl_status;
+	union cvmx_pciercx_cfg032 pciercx_cfg032;
+	union cvmx_pciercx_cfg448 pciercx_cfg448;
+
+	/* Bring up the link */
+	pem_ctl_status.u64 = cvmx_read_csr(CVMX_PEMX_CTL_STATUS(pcie_port));
+	pem_ctl_status.s.lnk_enb = 1;
+	cvmx_write_csr(CVMX_PEMX_CTL_STATUS(pcie_port), pem_ctl_status.u64);
+
+	/* Wait for the link to come up */
+	start_cycle = cvmx_get_cycle();
+	do {
+		if (cvmx_get_cycle() - start_cycle >  octeon_get_clock_rate())
+			return -1;
+		cvmx_wait(10000);
+		pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
+	} while ((pciercx_cfg032.s.dlla == 0) || (pciercx_cfg032.s.lt == 1));
+
+	/*
+	 * Update the Replay Time Limit. Empirically, some PCIe
+	 * devices take a little longer to respond than expected under
+	 * load. As a workaround for this we configure the Replay Time
+	 * Limit to the value expected for a 512 byte MPS instead of
+	 * our actual 256 byte MPS. The numbers below are directly
+	 * from the PCIe spec table 3-4
+	 */
+	pciercx_cfg448.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG448(pcie_port));
+	switch (pciercx_cfg032.s.nlw) {
+	case 1: /* 1 lane */
+		pciercx_cfg448.s.rtl = 1677;
+		break;
+	case 2: /* 2 lanes */
+		pciercx_cfg448.s.rtl = 867;
+		break;
+	case 4: /* 4 lanes */
+		pciercx_cfg448.s.rtl = 462;
+		break;
+	case 8: /* 8 lanes */
+		pciercx_cfg448.s.rtl = 258;
+		break;
+	}
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG448(pcie_port), pciercx_cfg448.u32);
+
+	return 0;
+}
+
+
+/**
+ * Initialize a PCIe gen 2 port for use in host(RC) mode. It doesn't enumerate
+ * the bus.
+ *
+ * @pcie_port: PCIe port to initialize
+ *
+ * Returns Zero on success.
+ */
+static int __cvmx_pcie_rc_initialize_gen2(int pcie_port)
+{
+	int i;
+	union cvmx_ciu_soft_prst ciu_soft_prst;
+	union cvmx_mio_rst_ctlx mio_rst_ctl;
+	union cvmx_pemx_bar_ctl pemx_bar_ctl;
+	union cvmx_pemx_ctl_status pemx_ctl_status;
+	union cvmx_pemx_bist_status pemx_bist_status;
+	union cvmx_pemx_bist_status2 pemx_bist_status2;
+	union cvmx_pciercx_cfg032 pciercx_cfg032;
+	union cvmx_pciercx_cfg515 pciercx_cfg515;
+	union cvmx_sli_ctl_portx sli_ctl_portx;
+	union cvmx_sli_mem_access_ctl sli_mem_access_ctl;
+	union cvmx_sli_mem_access_subidx mem_access_subid;
+	union cvmx_sriox_status_reg sriox_status_reg;
+	union cvmx_pemx_bar1_indexx bar1_index;
+
+	if (octeon_has_feature(OCTEON_FEATURE_SRIO)) {
+		/* Make sure this interface isn't SRIO */
+		if (OCTEON_IS_MODEL(OCTEON_CN66XX)) {
+			/*
+			 * The CN66XX requires reading the
+			 * MIO_QLMX_CFG register to figure out the
+			 * port type.
+			 */
+			union cvmx_mio_qlmx_cfg qlmx_cfg;
+			qlmx_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(pcie_port));
+
+			if (qlmx_cfg.s.qlm_spd == 15) {
+				pr_notice("PCIe: Port %d is disabled, skipping.\n", pcie_port);
+				return -1;
+			}
+
+			switch (qlmx_cfg.s.qlm_spd) {
+			case 0x1: /* SRIO 1x4 short */
+			case 0x3: /* SRIO 1x4 long */
+			case 0x4: /* SRIO 2x2 short */
+			case 0x6: /* SRIO 2x2 long */
+				pr_notice("PCIe: Port %d is SRIO, skipping.\n", pcie_port);
+				return -1;
+			case 0x9: /* SGMII */
+				pr_notice("PCIe: Port %d is SGMII, skipping.\n", pcie_port);
+				return -1;
+			case 0xb: /* XAUI */
+				pr_notice("PCIe: Port %d is XAUI, skipping.\n", pcie_port);
+				return -1;
+			case 0x0: /* PCIE gen2 */
+			case 0x8: /* PCIE gen2 (alias) */
+			case 0x2: /* PCIE gen1 */
+			case 0xa: /* PCIE gen1 (alias) */
+				break;
+			default:
+				pr_notice("PCIe: Port %d is unknown, skipping.\n", pcie_port);
+				return -1;
+			}
+		} else {
+			sriox_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(pcie_port));
+			if (sriox_status_reg.s.srio) {
+				pr_notice("PCIe: Port %d is SRIO, skipping.\n", pcie_port);
+				return -1;
+			}
+		}
+	}
+
+#if 0
+    /* This code is so that the PCIe analyzer is able to see 63XX traffic */
+	pr_notice("PCIE : init for pcie analyzer.\n");
+	cvmx_helper_qlm_jtag_init();
+	cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 85);
+	cvmx_helper_qlm_jtag_shift(pcie_port, 1, 1);
+	cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 300-86);
+	cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 85);
+	cvmx_helper_qlm_jtag_shift(pcie_port, 1, 1);
+	cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 300-86);
+	cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 85);
+	cvmx_helper_qlm_jtag_shift(pcie_port, 1, 1);
+	cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 300-86);
+	cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 85);
+	cvmx_helper_qlm_jtag_shift(pcie_port, 1, 1);
+	cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 300-86);
+	cvmx_helper_qlm_jtag_update(pcie_port);
+#endif
+
+	/* Make sure we aren't trying to setup a target mode interface in host mode */
+	mio_rst_ctl.u64 = cvmx_read_csr(CVMX_MIO_RST_CTLX(pcie_port));
+	if (!mio_rst_ctl.s.host_mode) {
+		pr_notice("PCIe: Port %d in endpoint mode.\n", pcie_port);
+		return -1;
+	}
+
+	/* CN63XX Pass 1.0 errata G-14395 requires the QLM De-emphasis be programmed */
+	if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_0)) {
+		if (pcie_port) {
+			union cvmx_ciu_qlm1 ciu_qlm;
+			ciu_qlm.u64 = cvmx_read_csr(CVMX_CIU_QLM1);
+			ciu_qlm.s.txbypass = 1;
+			ciu_qlm.s.txdeemph = 5;
+			ciu_qlm.s.txmargin = 0x17;
+			cvmx_write_csr(CVMX_CIU_QLM1, ciu_qlm.u64);
+		} else {
+			union cvmx_ciu_qlm0 ciu_qlm;
+			ciu_qlm.u64 = cvmx_read_csr(CVMX_CIU_QLM0);
+			ciu_qlm.s.txbypass = 1;
+			ciu_qlm.s.txdeemph = 5;
+			ciu_qlm.s.txmargin = 0x17;
+			cvmx_write_csr(CVMX_CIU_QLM0, ciu_qlm.u64);
+		}
+	}
+	/* Bring the PCIe out of reset */
+	if (pcie_port)
+		ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
+	else
+		ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+	/*
+	 * After a chip reset the PCIe will also be in reset. If it
+	 * isn't, most likely someone is trying to init it again
+	 * without a proper PCIe reset
+	 */
+	if (ciu_soft_prst.s.soft_prst == 0) {
+		/* Reset the port */
+		ciu_soft_prst.s.soft_prst = 1;
+		if (pcie_port)
+			cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64);
+		else
+			cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64);
+		/* Wait until pcie resets the ports. */
+		udelay(2000);
+	}
+	if (pcie_port) {
+		ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
+		ciu_soft_prst.s.soft_prst = 0;
+		cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64);
+	} else {
+		ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+		ciu_soft_prst.s.soft_prst = 0;
+		cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64);
+	}
+
+	/* Wait for PCIe reset to complete */
+	udelay(1000);
+
+	/*
+	 * Check and make sure PCIe came out of reset. If it doesn't
+	 * the board probably hasn't wired the clocks up and the
+	 * interface should be skipped.
+	 */
+	if (CVMX_WAIT_FOR_FIELD64(CVMX_MIO_RST_CTLX(pcie_port), union cvmx_mio_rst_ctlx, rst_done, ==, 1, 10000)) {
+		pr_notice("PCIe: Port %d stuck in reset, skipping.\n", pcie_port);
+		return -1;
+	}
+
+	/* Check BIST status */
+	pemx_bist_status.u64 = cvmx_read_csr(CVMX_PEMX_BIST_STATUS(pcie_port));
+	if (pemx_bist_status.u64)
+		pr_notice("PCIe: BIST FAILED for port %d (0x%016llx)\n", pcie_port, CAST64(pemx_bist_status.u64));
+	pemx_bist_status2.u64 = cvmx_read_csr(CVMX_PEMX_BIST_STATUS2(pcie_port));
+	/* Errata PCIE-14766 may cause the lower 6 bits to be randomly set on CN63XXp1 */
+	if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X))
+		pemx_bist_status2.u64 &= ~0x3full;
+	if (pemx_bist_status2.u64)
+		pr_notice("PCIe: BIST2 FAILED for port %d (0x%016llx)\n", pcie_port, CAST64(pemx_bist_status2.u64));
+
+	/* Initialize the config space CSRs */
+	__cvmx_pcie_rc_initialize_config_space(pcie_port);
+
+	/* Enable gen2 speed selection */
+	pciercx_cfg515.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG515(pcie_port));
+	pciercx_cfg515.s.dsc = 1;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG515(pcie_port), pciercx_cfg515.u32);
+
+	/* Bring the link up */
+	if (__cvmx_pcie_rc_initialize_link_gen2(pcie_port)) {
+		/*
+		 * Some gen1 devices don't handle the gen 2 training
+		 * correctly. Disable gen2 and try again with only
+		 * gen1
+		 */
+		union cvmx_pciercx_cfg031 pciercx_cfg031;
+		pciercx_cfg031.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG031(pcie_port));
+		pciercx_cfg031.s.mls = 1;
+		cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG031(pcie_port), pciercx_cfg031.u32);
+		if (__cvmx_pcie_rc_initialize_link_gen2(pcie_port)) {
+			pr_notice("PCIe: Link timeout on port %d, probably the slot is empty\n", pcie_port);
+			return -1;
+		}
+	}
+
+	/* Store merge control (SLI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */
+	sli_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_SLI_MEM_ACCESS_CTL);
+	sli_mem_access_ctl.s.max_word = 0;	/* Allow 16 words to combine */
+	sli_mem_access_ctl.s.timer = 127;	/* Wait up to 127 cycles for more data */
+	cvmx_write_csr(CVMX_PEXP_SLI_MEM_ACCESS_CTL, sli_mem_access_ctl.u64);
+
+	/* Setup Mem access SubDIDs */
+	mem_access_subid.u64 = 0;
+	mem_access_subid.s.port = pcie_port; /* Port the request is sent to. */
+	mem_access_subid.s.nmerge = 0;	/* Allow merging as it works on CN6XXX. */
+	mem_access_subid.s.esr = 1;	/* Endian-swap for Reads. */
+	mem_access_subid.s.esw = 1;	/* Endian-swap for Writes. */
+	mem_access_subid.s.wtype = 0;	/* "No snoop" and "Relaxed ordering" are not set */
+	mem_access_subid.s.rtype = 0;	/* "No snoop" and "Relaxed ordering" are not set */
+	/* PCIe Adddress Bits <63:34>. */
+	if (OCTEON_IS_MODEL(OCTEON_CN68XX))
+		mem_access_subid.cn68xx.ba = 0;
+	else
+		mem_access_subid.cn63xx.ba = 0;
+
+	/*
+	 * Setup mem access 12-15 for port 0, 16-19 for port 1,
+	 * supplying 36 bits of address space.
+	 */
+	for (i = 12 + pcie_port * 4; i < 16 + pcie_port * 4; i++) {
+		cvmx_write_csr(CVMX_PEXP_SLI_MEM_ACCESS_SUBIDX(i), mem_access_subid.u64);
+		/* Set each SUBID to extend the addressable range */
+		__cvmx_increment_ba(&mem_access_subid);
+	}
+
+	/*
+	 * Disable the peer to peer forwarding register. This must be
+	 * setup by the OS after it enumerates the bus and assigns
+	 * addresses to the PCIe busses.
+	 */
+	for (i = 0; i < 4; i++) {
+		cvmx_write_csr(CVMX_PEMX_P2P_BARX_START(i, pcie_port), -1);
+		cvmx_write_csr(CVMX_PEMX_P2P_BARX_END(i, pcie_port), -1);
+	}
+
+	/* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */
+	cvmx_write_csr(CVMX_PEMX_P2N_BAR0_START(pcie_port), 0);
+
+	/*
+	 * Set Octeon's BAR2 to decode 0-2^41. Bar0 and Bar1 take
+	 * precedence where they overlap. It also overlaps with the
+	 * device addresses, so make sure the peer to peer forwarding
+	 * is set right.
+	 */
+	cvmx_write_csr(CVMX_PEMX_P2N_BAR2_START(pcie_port), 0);
+
+	/*
+	 * Setup BAR2 attributes
+	 * Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM])
+	 * - PTLP_RO,CTLP_RO should normally be set (except for debug).
+	 * - WAIT_COM=0 will likely work for all applications.
+	 * Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM])
+	 */
+	pemx_bar_ctl.u64 = cvmx_read_csr(CVMX_PEMX_BAR_CTL(pcie_port));
+	pemx_bar_ctl.s.bar1_siz = 3;  /* 256MB BAR1*/
+	pemx_bar_ctl.s.bar2_enb = 1;
+	pemx_bar_ctl.s.bar2_esx = 1;
+	pemx_bar_ctl.s.bar2_cax = 0;
+	cvmx_write_csr(CVMX_PEMX_BAR_CTL(pcie_port), pemx_bar_ctl.u64);
+	sli_ctl_portx.u64 = cvmx_read_csr(CVMX_PEXP_SLI_CTL_PORTX(pcie_port));
+	sli_ctl_portx.s.ptlp_ro = 1;
+	sli_ctl_portx.s.ctlp_ro = 1;
+	sli_ctl_portx.s.wait_com = 0;
+	sli_ctl_portx.s.waitl_com = 0;
+	cvmx_write_csr(CVMX_PEXP_SLI_CTL_PORTX(pcie_port), sli_ctl_portx.u64);
+
+	/* BAR1 follows BAR2 */
+	cvmx_write_csr(CVMX_PEMX_P2N_BAR1_START(pcie_port), CVMX_PCIE_BAR1_RC_BASE);
+
+	bar1_index.u64 = 0;
+	bar1_index.s.addr_idx = (CVMX_PCIE_BAR1_PHYS_BASE >> 22);
+	bar1_index.s.ca = 1;	   /* Not Cached */
+	bar1_index.s.end_swp = 1;  /* Endian Swap mode */
+	bar1_index.s.addr_v = 1;   /* Valid entry */
+
+	for (i = 0; i < 16; i++) {
+		cvmx_write_csr(CVMX_PEMX_BAR1_INDEXX(i, pcie_port), bar1_index.u64);
+		/* 256MB / 16 >> 22 == 4 */
+		bar1_index.s.addr_idx += (((1ull << 28) / 16ull) >> 22);
+	}
+
+	/*
+	 * Allow config retries for 250ms. Count is based off the 5Ghz
+	 * SERDES clock.
+	 */
+	pemx_ctl_status.u64 = cvmx_read_csr(CVMX_PEMX_CTL_STATUS(pcie_port));
+	pemx_ctl_status.s.cfg_rtry = 250 * 5000000 / 0x10000;
+	cvmx_write_csr(CVMX_PEMX_CTL_STATUS(pcie_port), pemx_ctl_status.u64);
+
+	/* Display the link status */
+	pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
+	pr_notice("PCIe: Port %d link active, %d lanes, speed gen%d\n", pcie_port, pciercx_cfg032.s.nlw, pciercx_cfg032.s.ls);
+
+	return 0;
+}
+
+/**
+ * Initialize a PCIe port for use in host(RC) mode. It doesn't enumerate the bus.
+ *
+ * @pcie_port: PCIe port to initialize
+ *
+ * Returns Zero on success
+ */
+static int cvmx_pcie_rc_initialize(int pcie_port)
+{
+	int result;
+	if (octeon_has_feature(OCTEON_FEATURE_NPEI))
+		result = __cvmx_pcie_rc_initialize_gen1(pcie_port);
+	else
+		result = __cvmx_pcie_rc_initialize_gen2(pcie_port);
+	return result;
+}
+
+/* Above was cvmx-pcie.c, below original pcie.c */
+
+/**
+ * Map a PCI device to the appropriate interrupt line
+ *
+ * @dev:    The Linux PCI device structure for the device to map
+ * @slot:   The slot number for this device on __BUS 0__. Linux
+ *		 enumerates through all the bridges and figures out the
+ *		 slot on Bus 0 where this device eventually hooks to.
+ * @pin:    The PCI interrupt pin read from the device, then swizzled
+ *		 as it goes through each bridge.
+ * Returns Interrupt number for the device
+ */
+int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
+				       u8 slot, u8 pin)
+{
+	/*
+	 * The EBH5600 board with the PCI to PCIe bridge mistakenly
+	 * wires the first slot for both device id 2 and interrupt
+	 * A. According to the PCI spec, device id 2 should be C. The
+	 * following kludge attempts to fix this.
+	 */
+	if (strstr(octeon_board_type_string(), "EBH5600") &&
+	    dev->bus && dev->bus->parent) {
+		/*
+		 * Iterate all the way up the device chain and find
+		 * the root bus.
+		 */
+		while (dev->bus && dev->bus->parent)
+			dev = to_pci_dev(dev->bus->bridge);
+		/*
+		 * If the root bus is number 0 and the PEX 8114 is the
+		 * root, assume we are behind the miswired bus. We
+		 * need to correct the swizzle level by two. Yuck.
+		 */
+		if ((dev->bus->number == 1) &&
+		    (dev->vendor == 0x10b5) && (dev->device == 0x8114)) {
+			/*
+			 * The pin field is one based, not zero. We
+			 * need to swizzle it by minus two.
+			 */
+			pin = ((pin - 3) & 3) + 1;
+		}
+	}
+	/*
+	 * The -1 is because pin starts with one, not zero. It might
+	 * be that this equation needs to include the slot number, but
+	 * I don't have hardware to check that against.
+	 */
+	return pin - 1 + OCTEON_IRQ_PCI_INT0;
+}
+
+static	void set_cfg_read_retry(u32 retry_cnt)
+{
+	union cvmx_pemx_ctl_status pemx_ctl;
+	pemx_ctl.u64 = cvmx_read_csr(CVMX_PEMX_CTL_STATUS(1));
+	pemx_ctl.s.cfg_rtry = retry_cnt;
+	cvmx_write_csr(CVMX_PEMX_CTL_STATUS(1), pemx_ctl.u64);
+}
+
+
+static u32 disable_cfg_read_retry(void)
+{
+	u32 retry_cnt;
+
+	union cvmx_pemx_ctl_status pemx_ctl;
+	pemx_ctl.u64 = cvmx_read_csr(CVMX_PEMX_CTL_STATUS(1));
+	retry_cnt =  pemx_ctl.s.cfg_rtry;
+	pemx_ctl.s.cfg_rtry = 0;
+	cvmx_write_csr(CVMX_PEMX_CTL_STATUS(1), pemx_ctl.u64);
+	return retry_cnt;
+}
+
+static int is_cfg_retry(void)
+{
+	union cvmx_pemx_int_sum pemx_int_sum;
+	pemx_int_sum.u64 = cvmx_read_csr(CVMX_PEMX_INT_SUM(1));
+	if (pemx_int_sum.s.crs_dr)
+		return 1;
+	return 0;
+}
+
+/*
+ * Read a value from configuration space
+ *
+ */
+static int octeon_pcie_read_config(unsigned int pcie_port, struct pci_bus *bus,
+				   unsigned int devfn, int reg, int size,
+				   u32 *val)
+{
+	union octeon_cvmemctl cvmmemctl;
+	union octeon_cvmemctl cvmmemctl_save;
+	int bus_number = bus->number;
+	int cfg_retry = 0;
+	int retry_cnt = 0;
+	int max_retry_cnt = 10;
+	u32 cfg_retry_cnt = 0;
+
+	cvmmemctl_save.u64 = 0;
+	BUG_ON(pcie_port >= ARRAY_SIZE(enable_pcie_bus_num_war));
+	/*
+	 * For the top level bus make sure our hardware bus number
+	 * matches the software one
+	 */
+	if (bus->parent == NULL) {
+		if (enable_pcie_bus_num_war[pcie_port])
+			bus_number = 0;
+		else {
+			union cvmx_pciercx_cfg006 pciercx_cfg006;
+			pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port,
+					     CVMX_PCIERCX_CFG006(pcie_port));
+			if (pciercx_cfg006.s.pbnum != bus_number) {
+				pciercx_cfg006.s.pbnum = bus_number;
+				pciercx_cfg006.s.sbnum = bus_number;
+				pciercx_cfg006.s.subbnum = bus_number;
+				cvmx_pcie_cfgx_write(pcie_port,
+					    CVMX_PCIERCX_CFG006(pcie_port),
+					    pciercx_cfg006.u32);
+			}
+		}
+	}
+
+	/*
+	 * PCIe only has a single device connected to Octeon. It is
+	 * always device ID 0. Don't bother doing reads for other
+	 * device IDs on the first segment.
+	 */
+	if ((bus->parent == NULL) && (devfn >> 3 != 0))
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+
+	/*
+	 * The following is a workaround for the CN57XX, CN56XX,
+	 * CN55XX, and CN54XX errata with PCIe config reads from non
+	 * existent devices.  These chips will hang the PCIe link if a
+	 * config read is performed that causes a UR response.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) ||
+	    OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) {
+		/*
+		 * For our EBH5600 board, port 0 has a bridge with two
+		 * PCI-X slots. We need a new special checks to make
+		 * sure we only probe valid stuff.  The PCIe->PCI-X
+		 * bridge only respondes to device ID 0, function
+		 * 0-1
+		 */
+		if ((bus->parent == NULL) && (devfn >= 2))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+		/*
+		 * The PCI-X slots are device ID 2,3. Choose one of
+		 * the below "if" blocks based on what is plugged into
+		 * the board.
+		 */
+#if 1
+		/* Use this option if you aren't using either slot */
+		if (bus_number == 2)
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+#elif 0
+		/*
+		 * Use this option if you are using the first slot but
+		 * not the second.
+		 */
+		if ((bus_number == 2) && (devfn >> 3 != 2))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+#elif 0
+		/*
+		 * Use this option if you are using the second slot
+		 * but not the first.
+		 */
+		if ((bus_number == 2) && (devfn >> 3 != 3))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+#elif 0
+		/* Use this opion if you are using both slots */
+		if ((bus_number == 2) &&
+		    !((devfn == (2 << 3)) || (devfn == (3 << 3))))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+#endif
+
+		/* The following #if gives a more complicated example. This is
+		   the required checks for running a Nitrox CN16XX-NHBX in the
+		   slot of the EBH5600. This card has a PLX PCIe bridge with
+		   four Nitrox PLX parts behind it */
+#if 0
+		/* PLX bridge with 4 ports */
+		if ((bus_number == 4) &&
+		    !((devfn >> 3 >= 1) && (devfn >> 3 <= 4)))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+		/* Nitrox behind PLX 1 */
+		if ((bus_number == 5) && (devfn >> 3 != 0))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+		/* Nitrox behind PLX 2 */
+		if ((bus_number == 6) && (devfn >> 3 != 0))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+		/* Nitrox behind PLX 3 */
+		if ((bus_number == 7) && (devfn >> 3 != 0))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+		/* Nitrox behind PLX 4 */
+		if ((bus_number == 8) && (devfn >> 3 != 0))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+#endif
+
+		/*
+		 * Shorten the DID timeout so bus errors for PCIe
+		 * config reads from non existent devices happen
+		 * faster. This allows us to continue booting even if
+		 * the above "if" checks are wrong.  Once one of these
+		 * errors happens, the PCIe port is dead.
+		 */
+		cvmmemctl_save.u64 = __read_64bit_c0_register($11, 7);
+		cvmmemctl.u64 = cvmmemctl_save.u64;
+		cvmmemctl.s.didtto = 2;
+		__write_64bit_c0_register($11, 7, cvmmemctl.u64);
+	}
+
+	if ((OCTEON_IS_MODEL(OCTEON_CN63XX)) && (enable_pcie_14459_war))
+		cfg_retry_cnt = disable_cfg_read_retry();
+
+	pr_debug("pcie_cfg_rd port=%d b=%d devfn=0x%03x reg=0x%03x"
+		 " size=%d ", pcie_port, bus_number, devfn, reg, size);
+	do {
+		switch (size) {
+		case 4:
+			*val = cvmx_pcie_config_read32(pcie_port, bus_number,
+				devfn >> 3, devfn & 0x7, reg);
+		break;
+		case 2:
+			*val = cvmx_pcie_config_read16(pcie_port, bus_number,
+				devfn >> 3, devfn & 0x7, reg);
+		break;
+		case 1:
+			*val = cvmx_pcie_config_read8(pcie_port, bus_number,
+				devfn >> 3, devfn & 0x7, reg);
+		break;
+		default:
+			if (OCTEON_IS_MODEL(OCTEON_CN63XX))
+				set_cfg_read_retry(cfg_retry_cnt);
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+		}
+		if ((OCTEON_IS_MODEL(OCTEON_CN63XX)) &&
+			(enable_pcie_14459_war)) {
+			cfg_retry = is_cfg_retry();
+			retry_cnt++;
+			if (retry_cnt > max_retry_cnt) {
+				pr_err(" pcie cfg_read retries failed. retry_cnt=%d\n",
+				       retry_cnt);
+				cfg_retry = 0;
+			}
+		}
+	} while (cfg_retry);
+
+	if ((OCTEON_IS_MODEL(OCTEON_CN63XX)) && (enable_pcie_14459_war))
+		set_cfg_read_retry(cfg_retry_cnt);
+	pr_debug("val=%08x  : tries=%02d\n", *val, retry_cnt);
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) ||
+	    OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1))
+		write_c0_cvmmemctl(cvmmemctl_save.u64);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int octeon_pcie0_read_config(struct pci_bus *bus, unsigned int devfn,
+				    int reg, int size, u32 *val)
+{
+	return octeon_pcie_read_config(0, bus, devfn, reg, size, val);
+}
+
+static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn,
+				    int reg, int size, u32 *val)
+{
+	return octeon_pcie_read_config(1, bus, devfn, reg, size, val);
+}
+
+static int octeon_dummy_read_config(struct pci_bus *bus, unsigned int devfn,
+				    int reg, int size, u32 *val)
+{
+	return PCIBIOS_FUNC_NOT_SUPPORTED;
+}
+
+/*
+ * Write a value to PCI configuration space
+ */
+static int octeon_pcie_write_config(unsigned int pcie_port, struct pci_bus *bus,
+				    unsigned int devfn, int reg,
+				    int size, u32 val)
+{
+	int bus_number = bus->number;
+
+	BUG_ON(pcie_port >= ARRAY_SIZE(enable_pcie_bus_num_war));
+
+	if ((bus->parent == NULL) && (enable_pcie_bus_num_war[pcie_port]))
+		bus_number = 0;
+
+	pr_debug("pcie_cfg_wr port=%d b=%d devfn=0x%03x"
+		 " reg=0x%03x size=%d val=%08x\n", pcie_port, bus_number, devfn,
+		 reg, size, val);
+
+
+	switch (size) {
+	case 4:
+		cvmx_pcie_config_write32(pcie_port, bus_number, devfn >> 3,
+					 devfn & 0x7, reg, val);
+		break;
+	case 2:
+		cvmx_pcie_config_write16(pcie_port, bus_number, devfn >> 3,
+					 devfn & 0x7, reg, val);
+		break;
+	case 1:
+		cvmx_pcie_config_write8(pcie_port, bus_number, devfn >> 3,
+					devfn & 0x7, reg, val);
+		break;
+	default:
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int octeon_pcie0_write_config(struct pci_bus *bus, unsigned int devfn,
+				     int reg, int size, u32 val)
+{
+	return octeon_pcie_write_config(0, bus, devfn, reg, size, val);
+}
+
+static int octeon_pcie1_write_config(struct pci_bus *bus, unsigned int devfn,
+				     int reg, int size, u32 val)
+{
+	return octeon_pcie_write_config(1, bus, devfn, reg, size, val);
+}
+
+static int octeon_dummy_write_config(struct pci_bus *bus, unsigned int devfn,
+				     int reg, int size, u32 val)
+{
+	return PCIBIOS_FUNC_NOT_SUPPORTED;
+}
+
+static struct pci_ops octeon_pcie0_ops = {
+	.read	= octeon_pcie0_read_config,
+	.write	= octeon_pcie0_write_config,
+};
+
+static struct resource octeon_pcie0_mem_resource = {
+	.name = "Octeon PCIe0 MEM",
+	.flags = IORESOURCE_MEM,
+};
+
+static struct resource octeon_pcie0_io_resource = {
+	.name = "Octeon PCIe0 IO",
+	.flags = IORESOURCE_IO,
+};
+
+static struct pci_controller octeon_pcie0_controller = {
+	.pci_ops = &octeon_pcie0_ops,
+	.mem_resource = &octeon_pcie0_mem_resource,
+	.io_resource = &octeon_pcie0_io_resource,
+};
+
+static struct pci_ops octeon_pcie1_ops = {
+	.read	= octeon_pcie1_read_config,
+	.write	= octeon_pcie1_write_config,
+};
+
+static struct resource octeon_pcie1_mem_resource = {
+	.name = "Octeon PCIe1 MEM",
+	.flags = IORESOURCE_MEM,
+};
+
+static struct resource octeon_pcie1_io_resource = {
+	.name = "Octeon PCIe1 IO",
+	.flags = IORESOURCE_IO,
+};
+
+static struct pci_controller octeon_pcie1_controller = {
+	.pci_ops = &octeon_pcie1_ops,
+	.mem_resource = &octeon_pcie1_mem_resource,
+	.io_resource = &octeon_pcie1_io_resource,
+};
+
+static struct pci_ops octeon_dummy_ops = {
+	.read	= octeon_dummy_read_config,
+	.write	= octeon_dummy_write_config,
+};
+
+static struct resource octeon_dummy_mem_resource = {
+	.name = "Virtual PCIe MEM",
+	.flags = IORESOURCE_MEM,
+};
+
+static struct resource octeon_dummy_io_resource = {
+	.name = "Virtual PCIe IO",
+	.flags = IORESOURCE_IO,
+};
+
+static struct pci_controller octeon_dummy_controller = {
+	.pci_ops = &octeon_dummy_ops,
+	.mem_resource = &octeon_dummy_mem_resource,
+	.io_resource = &octeon_dummy_io_resource,
+};
+
+static int device_needs_bus_num_war(uint32_t deviceid)
+{
+#define IDT_VENDOR_ID 0x111d
+
+	if ((deviceid  & 0xffff) == IDT_VENDOR_ID)
+		return 1;
+	return 0;
+}
+
+/**
+ * Initialize the Octeon PCIe controllers
+ *
+ * Returns
+ */
+static int __init octeon_pcie_setup(void)
+{
+	int result;
+	int host_mode;
+	int srio_war15205 = 0, port;
+	union cvmx_sli_ctl_portx sli_ctl_portx;
+	union cvmx_sriox_status_reg sriox_status_reg;
+
+	/* These chips don't have PCIe */
+	if (!octeon_has_feature(OCTEON_FEATURE_PCIE))
+		return 0;
+
+	/* No PCIe simulation */
+	if (octeon_is_simulation())
+		return 0;
+
+	/* Disable PCI if instructed on the command line */
+	if (pcie_disable)
+		return 0;
+
+	/* Point pcibios_map_irq() to the PCIe version of it */
+	octeon_pcibios_map_irq = octeon_pcie_pcibios_map_irq;
+
+	/*
+	 * PCIe I/O range. It is based on port 0 but includes up until
+	 * port 1's end.
+	 */
+	set_io_port_base(CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(0)));
+	ioport_resource.start = 0;
+	ioport_resource.end =
+		cvmx_pcie_get_io_base_address(1) -
+		cvmx_pcie_get_io_base_address(0) + cvmx_pcie_get_io_size(1) - 1;
+
+	/*
+	 * Create a dummy PCIe controller to swallow up bus 0. IDT bridges
+	 * don't work if the primary bus number is zero. Here we add a fake
+	 * PCIe controller that the kernel will give bus 0. This allows
+	 * us to not change the normal kernel bus enumeration
+	 */
+	octeon_dummy_controller.io_map_base = -1;
+	octeon_dummy_controller.mem_resource->start = (1ull<<48);
+	octeon_dummy_controller.mem_resource->end = (1ull<<48);
+	register_pci_controller(&octeon_dummy_controller);
+
+	if (octeon_has_feature(OCTEON_FEATURE_NPEI)) {
+		union cvmx_npei_ctl_status npei_ctl_status;
+		npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS);
+		host_mode = npei_ctl_status.s.host_mode;
+		octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_PCIE;
+	} else {
+		union cvmx_mio_rst_ctlx mio_rst_ctl;
+		mio_rst_ctl.u64 = cvmx_read_csr(CVMX_MIO_RST_CTLX(0));
+		host_mode = mio_rst_ctl.s.host_mode;
+		octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_PCIE2;
+	}
+
+	if (host_mode) {
+		pr_notice("PCIe: Initializing port 0\n");
+		/* CN63XX pass 1_x/2.0 errata PCIe-15205 */
+		if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X) ||
+			OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) {
+			sriox_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(0));
+			if (sriox_status_reg.s.srio) {
+				srio_war15205 += 1;	 /* Port is SRIO */
+				port = 0;
+			}
+		}
+		result = cvmx_pcie_rc_initialize(0);
+		if (result == 0) {
+			uint32_t device0;
+			/* Memory offsets are physical addresses */
+			octeon_pcie0_controller.mem_offset =
+				cvmx_pcie_get_mem_base_address(0);
+			/* IO offsets are Mips virtual addresses */
+			octeon_pcie0_controller.io_map_base =
+				CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address
+						(0));
+			octeon_pcie0_controller.io_offset = 0;
+			/*
+			 * To keep things similar to PCI, we start
+			 * device addresses at the same place as PCI
+			 * uisng big bar support. This normally
+			 * translates to 4GB-256MB, which is the same
+			 * as most x86 PCs.
+			 */
+			octeon_pcie0_controller.mem_resource->start =
+				cvmx_pcie_get_mem_base_address(0) +
+				(4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20);
+			octeon_pcie0_controller.mem_resource->end =
+				cvmx_pcie_get_mem_base_address(0) +
+				cvmx_pcie_get_mem_size(0) - 1;
+			/*
+			 * Ports must be above 16KB for the ISA bus
+			 * filtering in the PCI-X to PCI bridge.
+			 */
+			octeon_pcie0_controller.io_resource->start = 4 << 10;
+			octeon_pcie0_controller.io_resource->end =
+				cvmx_pcie_get_io_size(0) - 1;
+			msleep(100); /* Some devices need extra time */
+			register_pci_controller(&octeon_pcie0_controller);
+			device0 = cvmx_pcie_config_read32(0, 0, 0, 0, 0);
+			enable_pcie_bus_num_war[0] =
+				device_needs_bus_num_war(device0);
+		}
+	} else {
+		pr_notice("PCIe: Port 0 in endpoint mode, skipping.\n");
+		/* CN63XX pass 1_x/2.0 errata PCIe-15205 */
+		if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X) ||
+			OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) {
+			srio_war15205 += 1;
+			port = 0;
+		}
+	}
+
+	if (octeon_has_feature(OCTEON_FEATURE_NPEI)) {
+		host_mode = 1;
+		/* Skip the 2nd port on CN52XX if port 0 is in 4 lane mode */
+		if (OCTEON_IS_MODEL(OCTEON_CN52XX)) {
+			union cvmx_npei_dbg_data dbg_data;
+			dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA);
+			if (dbg_data.cn52xx.qlm0_link_width)
+				host_mode = 0;
+		}
+	} else {
+		union cvmx_mio_rst_ctlx mio_rst_ctl;
+		mio_rst_ctl.u64 = cvmx_read_csr(CVMX_MIO_RST_CTLX(1));
+		host_mode = mio_rst_ctl.s.host_mode;
+	}
+
+	if (host_mode) {
+		pr_notice("PCIe: Initializing port 1\n");
+		/* CN63XX pass 1_x/2.0 errata PCIe-15205 */
+		if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X) ||
+			OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) {
+			sriox_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(1));
+			if (sriox_status_reg.s.srio) {
+				srio_war15205 += 1;	 /* Port is SRIO */
+				port = 1;
+			}
+		}
+		result = cvmx_pcie_rc_initialize(1);
+		if (result == 0) {
+			uint32_t device0;
+			/* Memory offsets are physical addresses */
+			octeon_pcie1_controller.mem_offset =
+				cvmx_pcie_get_mem_base_address(1);
+			/*
+			 * To calculate the address for accessing the 2nd PCIe device,
+			 * either 'io_map_base' (pci_iomap()), or 'mips_io_port_base'
+			 * (ioport_map()) value is added to
+			 * pci_resource_start(dev,bar)). The 'mips_io_port_base' is set
+			 * only once based on first PCIe. Also changing 'io_map_base'
+			 * based on first slot's value so that both the routines will
+			 * work properly.
+			 */
+			octeon_pcie1_controller.io_map_base =
+				CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(0));
+			/* IO offsets are Mips virtual addresses */
+			octeon_pcie1_controller.io_offset =
+				cvmx_pcie_get_io_base_address(1) -
+				cvmx_pcie_get_io_base_address(0);
+			/*
+			 * To keep things similar to PCI, we start device
+			 * addresses at the same place as PCI uisng big bar
+			 * support. This normally translates to 4GB-256MB,
+			 * which is the same as most x86 PCs.
+			 */
+			octeon_pcie1_controller.mem_resource->start =
+				cvmx_pcie_get_mem_base_address(1) + (4ul << 30) -
+				(OCTEON_PCI_BAR1_HOLE_SIZE << 20);
+			octeon_pcie1_controller.mem_resource->end =
+				cvmx_pcie_get_mem_base_address(1) +
+				cvmx_pcie_get_mem_size(1) - 1;
+			/*
+			 * Ports must be above 16KB for the ISA bus filtering
+			 * in the PCI-X to PCI bridge.
+			 */
+			octeon_pcie1_controller.io_resource->start =
+				cvmx_pcie_get_io_base_address(1) -
+				cvmx_pcie_get_io_base_address(0);
+			octeon_pcie1_controller.io_resource->end =
+				octeon_pcie1_controller.io_resource->start +
+				cvmx_pcie_get_io_size(1) - 1;
+			msleep(100); /* Some devices need extra time */
+			register_pci_controller(&octeon_pcie1_controller);
+			device0 = cvmx_pcie_config_read32(1, 0, 0, 0, 0);
+			enable_pcie_bus_num_war[1] =
+				device_needs_bus_num_war(device0);
+		}
+	} else {
+		pr_notice("PCIe: Port 1 not in root complex mode, skipping.\n");
+		/* CN63XX pass 1_x/2.0 errata PCIe-15205  */
+		if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X) ||
+			OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) {
+			srio_war15205 += 1;
+			port = 1;
+		}
+	}
+
+	/*
+	 * CN63XX pass 1_x/2.0 errata PCIe-15205 requires setting all
+	 * of SRIO MACs SLI_CTL_PORT*[INT*_MAP] to similar value and
+	 * all of PCIe Macs SLI_CTL_PORT*[INT*_MAP] to different value
+	 * from the previous set values
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X) ||
+		OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) {
+		if (srio_war15205 == 1) {
+			sli_ctl_portx.u64 = cvmx_read_csr(CVMX_PEXP_SLI_CTL_PORTX(port));
+			sli_ctl_portx.s.inta_map = 1;
+			sli_ctl_portx.s.intb_map = 1;
+			sli_ctl_portx.s.intc_map = 1;
+			sli_ctl_portx.s.intd_map = 1;
+			cvmx_write_csr(CVMX_PEXP_SLI_CTL_PORTX(port), sli_ctl_portx.u64);
+
+			sli_ctl_portx.u64 = cvmx_read_csr(CVMX_PEXP_SLI_CTL_PORTX(!port));
+			sli_ctl_portx.s.inta_map = 0;
+			sli_ctl_portx.s.intb_map = 0;
+			sli_ctl_portx.s.intc_map = 0;
+			sli_ctl_portx.s.intd_map = 0;
+			cvmx_write_csr(CVMX_PEXP_SLI_CTL_PORTX(!port), sli_ctl_portx.u64);
+		}
+	}
+
+	octeon_pci_dma_init();
+
+	return 0;
+}
+arch_initcall(octeon_pcie_setup);