Linux-libre 4.5-gnu

10 files changed, 363 insertions, 34 deletions

diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index e9bc8c961..813826a45 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -12,6 +12,11 @@ config RALINK_ILL_ACC
 	depends on SOC_RT305X
 	default y
 
+config IRQ_INTC
+	bool
+	default y
+	depends on !SOC_MT7621
+
 choice
 	prompt "Ralink SoC selection"
 	default SOC_RT305X
@@ -33,7 +38,18 @@ choice
 
 	config SOC_MT7620
 		bool "MT7620/8"
+		select HW_HAS_PCI
 
+	config SOC_MT7621
+		bool "MT7621"
+		select MIPS_CPU_SCACHE
+		select SYS_SUPPORTS_MULTITHREADING
+		select SYS_SUPPORTS_SMP
+		select SYS_SUPPORTS_MIPS_CPS
+		select MIPS_GIC
+		select COMMON_CLK
+		select CLKSRC_MIPS_GIC
+		select HW_HAS_PCI
 endchoice
 
 choice
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index a6c9d0061..0d1795a03 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,16 +6,24 @@
 # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
 # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
 
-obj-y := prom.o of.o reset.o clk.o irq.o timer.o
+obj-y := prom.o of.o reset.o
+
+ifndef CONFIG_MIPS_GIC
+	obj-y += clk.o timer.o
+endif
 
 obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
 
 obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
 
+obj-$(CONFIG_IRQ_INTC) += irq.o
+obj-$(CONFIG_MIPS_GIC) += irq-gic.o timer-gic.o
+
 obj-$(CONFIG_SOC_RT288X) += rt288x.o
 obj-$(CONFIG_SOC_RT305X) += rt305x.o
 obj-$(CONFIG_SOC_RT3883) += rt3883.o
 obj-$(CONFIG_SOC_MT7620) += mt7620.o
+obj-$(CONFIG_SOC_MT7621) += mt7621.o
 
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index 6d9c8c499..6095fcc33 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt
 #
 load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
 cflags-$(CONFIG_SOC_MT7620)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
+
+# Ralink MT7621
+#
+load-$(CONFIG_SOC_MT7621)	+= 0xffffffff80001000
+cflags-$(CONFIG_SOC_MT7621)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
diff --git a/arch/mips/ralink/irq-gic.c b/arch/mips/ralink/irq-gic.c
new file mode 100644
index 000000000..50d6c55ab
--- /dev/null
+++ b/arch/mips/ralink/irq-gic.c
@@ -0,0 +1,25 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+
+#include <linux/of.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/mips-gic.h>
+
+int get_c0_perfcount_int(void)
+{
+	return gic_get_c0_perfcount_int();
+}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+
+void __init arch_init_irq(void)
+{
+	irqchip_init();
+}
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index dfb04fced..0d3d1a978 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -107,31 +107,31 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
 };
 
 static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
-	FUNC("sdcx", 3, 19, 1),
+	FUNC("sdxc d6", 3, 19, 1),
 	FUNC("utif", 2, 19, 1),
 	FUNC("gpio", 1, 19, 1),
-	FUNC("pwm", 0, 19, 1),
+	FUNC("pwm1", 0, 19, 1),
 };
 
 static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
-	FUNC("sdcx", 3, 18, 1),
+	FUNC("sdxc d7", 3, 18, 1),
 	FUNC("utif", 2, 18, 1),
 	FUNC("gpio", 1, 18, 1),
-	FUNC("pwm", 0, 18, 1),
+	FUNC("pwm0", 0, 18, 1),
 };
 
 static struct rt2880_pmx_func uart2_grp_mt7628[] = {
-	FUNC("sdcx", 3, 20, 2),
+	FUNC("sdxc d5 d4", 3, 20, 2),
 	FUNC("pwm", 2, 20, 2),
 	FUNC("gpio", 1, 20, 2),
-	FUNC("uart", 0, 20, 2),
+	FUNC("uart2", 0, 20, 2),
 };
 
 static struct rt2880_pmx_func uart1_grp_mt7628[] = {
-	FUNC("sdcx", 3, 45, 2),
+	FUNC("sw_r", 3, 45, 2),
 	FUNC("pwm", 2, 45, 2),
 	FUNC("gpio", 1, 45, 2),
-	FUNC("uart", 0, 45, 2),
+	FUNC("uart1", 0, 45, 2),
 };
 
 static struct rt2880_pmx_func i2c_grp_mt7628[] = {
@@ -143,21 +143,21 @@ static struct rt2880_pmx_func i2c_grp_mt7628[] = {
 
 static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
 static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
-static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) };
+static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
 static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
 
 static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
 	FUNC("jtag", 3, 22, 8),
 	FUNC("utif", 2, 22, 8),
 	FUNC("gpio", 1, 22, 8),
-	FUNC("sdcx", 0, 22, 8),
+	FUNC("sdxc", 0, 22, 8),
 };
 
 static struct rt2880_pmx_func uart0_grp_mt7628[] = {
 	FUNC("-", 3, 12, 2),
 	FUNC("-", 2, 12, 2),
 	FUNC("gpio", 1, 12, 2),
-	FUNC("uart", 0, 12, 2),
+	FUNC("uart0", 0, 12, 2),
 };
 
 static struct rt2880_pmx_func i2s_grp_mt7628[] = {
@@ -171,7 +171,7 @@ static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
 	FUNC("-", 3, 6, 1),
 	FUNC("refclk", 2, 6, 1),
 	FUNC("gpio", 1, 6, 1),
-	FUNC("spi", 0, 6, 1),
+	FUNC("spi cs1", 0, 6, 1),
 };
 
 static struct rt2880_pmx_func spis_grp_mt7628[] = {
@@ -188,28 +188,44 @@ static struct rt2880_pmx_func gpio_grp_mt7628[] = {
 	FUNC("gpio", 0, 11, 1),
 };
 
-#define MT7628_GPIO_MODE_MASK	0x3
-
-#define MT7628_GPIO_MODE_PWM1	30
-#define MT7628_GPIO_MODE_PWM0	28
-#define MT7628_GPIO_MODE_UART2	26
-#define MT7628_GPIO_MODE_UART1	24
-#define MT7628_GPIO_MODE_I2C	20
-#define MT7628_GPIO_MODE_REFCLK	18
-#define MT7628_GPIO_MODE_PERST	16
-#define MT7628_GPIO_MODE_WDT	14
-#define MT7628_GPIO_MODE_SPI	12
-#define MT7628_GPIO_MODE_SDMODE	10
-#define MT7628_GPIO_MODE_UART0	8
-#define MT7628_GPIO_MODE_I2S	6
-#define MT7628_GPIO_MODE_CS1	4
-#define MT7628_GPIO_MODE_SPIS	2
-#define MT7628_GPIO_MODE_GPIO	0
+static struct rt2880_pmx_func wled_kn_grp_mt7628[] = {
+	FUNC("rsvd", 3, 35, 1),
+	FUNC("rsvd", 2, 35, 1),
+	FUNC("gpio", 1, 35, 1),
+	FUNC("wled_kn", 0, 35, 1),
+};
+
+static struct rt2880_pmx_func wled_an_grp_mt7628[] = {
+	FUNC("rsvd", 3, 35, 1),
+	FUNC("rsvd", 2, 35, 1),
+	FUNC("gpio", 1, 35, 1),
+	FUNC("wled_an", 0, 35, 1),
+};
+
+#define MT7628_GPIO_MODE_MASK		0x3
+
+#define MT7628_GPIO_MODE_WLED_KN	48
+#define MT7628_GPIO_MODE_WLED_AN	32
+#define MT7628_GPIO_MODE_PWM1		30
+#define MT7628_GPIO_MODE_PWM0		28
+#define MT7628_GPIO_MODE_UART2		26
+#define MT7628_GPIO_MODE_UART1		24
+#define MT7628_GPIO_MODE_I2C		20
+#define MT7628_GPIO_MODE_REFCLK		18
+#define MT7628_GPIO_MODE_PERST		16
+#define MT7628_GPIO_MODE_WDT		14
+#define MT7628_GPIO_MODE_SPI		12
+#define MT7628_GPIO_MODE_SDMODE		10
+#define MT7628_GPIO_MODE_UART0		8
+#define MT7628_GPIO_MODE_I2S		6
+#define MT7628_GPIO_MODE_CS1		4
+#define MT7628_GPIO_MODE_SPIS		2
+#define MT7628_GPIO_MODE_GPIO		0
 
 static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
 	GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_PWM1),
-	GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
+	GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_PWM0),
 	GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_UART2),
@@ -233,6 +249,10 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
 				1, MT7628_GPIO_MODE_SPIS),
 	GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_GPIO),
+	GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_WLED_AN),
+	GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_WLED_KN),
 	{ 0 }
 };
 
@@ -436,10 +456,13 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("10000100.timer", periph_rate);
 	ralink_clk_add("10000120.watchdog", periph_rate);
 	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
 	ralink_clk_add("10000c00.uartlite", periph_rate);
+	ralink_clk_add("10000d00.uart1", periph_rate);
+	ralink_clk_add("10000e00.uart2", periph_rate);
 	ralink_clk_add("10180000.wmac", xtal_rate);
 
-	if (IS_ENABLED(CONFIG_USB) && is_mt76x8()) {
+	if (IS_ENABLED(CONFIG_USB) && !is_mt76x8()) {
 		/*
 		 * When the CPU goes into sleep mode, the BUS clock will be
 		 * too low for USB to function properly. Adjust the busses
@@ -552,7 +575,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	}
 
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-		"Ralink %s ver:%u eco:%u",
+		"MediaTek %s ver:%u eco:%u",
 		name,
 		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
 		(rev & CHIP_REV_ECO_MASK));
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
new file mode 100644
index 000000000..e9b9fa3e1
--- /dev/null
+++ b/arch/mips/ralink/mt7621.c
@@ -0,0 +1,226 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/smp-ops.h>
+#include <asm/mips-cm.h>
+#include <asm/mips-cpc.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7621.h>
+
+#include <pinmux.h>
+
+#include "common.h"
+
+#define SYSC_REG_SYSCFG		0x10
+#define SYSC_REG_CPLL_CLKCFG0	0x2c
+#define SYSC_REG_CUR_CLK_STS	0x44
+#define CPU_CLK_SEL		(BIT(30) | BIT(31))
+
+#define MT7621_GPIO_MODE_UART1		1
+#define MT7621_GPIO_MODE_I2C		2
+#define MT7621_GPIO_MODE_UART3_MASK	0x3
+#define MT7621_GPIO_MODE_UART3_SHIFT	3
+#define MT7621_GPIO_MODE_UART3_GPIO	1
+#define MT7621_GPIO_MODE_UART2_MASK	0x3
+#define MT7621_GPIO_MODE_UART2_SHIFT	5
+#define MT7621_GPIO_MODE_UART2_GPIO	1
+#define MT7621_GPIO_MODE_JTAG		7
+#define MT7621_GPIO_MODE_WDT_MASK	0x3
+#define MT7621_GPIO_MODE_WDT_SHIFT	8
+#define MT7621_GPIO_MODE_WDT_GPIO	1
+#define MT7621_GPIO_MODE_PCIE_RST	0
+#define MT7621_GPIO_MODE_PCIE_REF	2
+#define MT7621_GPIO_MODE_PCIE_MASK	0x3
+#define MT7621_GPIO_MODE_PCIE_SHIFT	10
+#define MT7621_GPIO_MODE_PCIE_GPIO	1
+#define MT7621_GPIO_MODE_MDIO_MASK	0x3
+#define MT7621_GPIO_MODE_MDIO_SHIFT	12
+#define MT7621_GPIO_MODE_MDIO_GPIO	1
+#define MT7621_GPIO_MODE_RGMII1		14
+#define MT7621_GPIO_MODE_RGMII2		15
+#define MT7621_GPIO_MODE_SPI_MASK	0x3
+#define MT7621_GPIO_MODE_SPI_SHIFT	16
+#define MT7621_GPIO_MODE_SPI_GPIO	1
+#define MT7621_GPIO_MODE_SDHCI_MASK	0x3
+#define MT7621_GPIO_MODE_SDHCI_SHIFT	18
+#define MT7621_GPIO_MODE_SDHCI_GPIO	1
+
+static struct rt2880_pmx_func uart1_grp[] =  { FUNC("uart1", 0, 1, 2) };
+static struct rt2880_pmx_func i2c_grp[] =  { FUNC("i2c", 0, 3, 2) };
+static struct rt2880_pmx_func uart3_grp[] = {
+	FUNC("uart3", 0, 5, 4),
+	FUNC("i2s", 2, 5, 4),
+	FUNC("spdif3", 3, 5, 4),
+};
+static struct rt2880_pmx_func uart2_grp[] = {
+	FUNC("uart2", 0, 9, 4),
+	FUNC("pcm", 2, 9, 4),
+	FUNC("spdif2", 3, 9, 4),
+};
+static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
+static struct rt2880_pmx_func wdt_grp[] = {
+	FUNC("wdt rst", 0, 18, 1),
+	FUNC("wdt refclk", 2, 18, 1),
+};
+static struct rt2880_pmx_func pcie_rst_grp[] = {
+	FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
+	FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
+};
+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
+static struct rt2880_pmx_func spi_grp[] = {
+	FUNC("spi", 0, 34, 7),
+	FUNC("nand1", 2, 34, 7),
+};
+static struct rt2880_pmx_func sdhci_grp[] = {
+	FUNC("sdhci", 0, 41, 8),
+	FUNC("nand2", 2, 41, 8),
+};
+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
+
+static struct rt2880_pmx_group mt7621_pinmux_data[] = {
+	GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
+	GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
+	GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
+		MT7621_GPIO_MODE_UART3_GPIO, MT7621_GPIO_MODE_UART3_SHIFT),
+	GRP_G("uart2", uart2_grp, MT7621_GPIO_MODE_UART2_MASK,
+		MT7621_GPIO_MODE_UART2_GPIO, MT7621_GPIO_MODE_UART2_SHIFT),
+	GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
+	GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
+		MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
+	GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
+		MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
+	GRP_G("mdio", mdio_grp, MT7621_GPIO_MODE_MDIO_MASK,
+		MT7621_GPIO_MODE_MDIO_GPIO, MT7621_GPIO_MODE_MDIO_SHIFT),
+	GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
+	GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
+		MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
+	GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
+		MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
+	GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
+	{ 0 }
+};
+
+phys_addr_t mips_cpc_default_phys_base(void)
+{
+	panic("Cannot detect cpc address");
+}
+
+void __init ralink_clk_init(void)
+{
+	int cpu_fdiv = 0;
+	int cpu_ffrac = 0;
+	int fbdiv = 0;
+	u32 clk_sts, syscfg;
+	u8 clk_sel = 0, xtal_mode;
+	u32 cpu_clk;
+
+	if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
+		clk_sel = 1;
+
+	switch (clk_sel) {
+	case 0:
+		clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
+		cpu_fdiv = ((clk_sts >> 8) & 0x1F);
+		cpu_ffrac = (clk_sts & 0x1F);
+		cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
+		break;
+
+	case 1:
+		fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
+		syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
+		xtal_mode = (syscfg >> 6) & 0x7;
+		if (xtal_mode >= 6) {
+			/* 25Mhz Xtal */
+			cpu_clk = 25 * fbdiv * 1000 * 1000;
+		} else if (xtal_mode >= 3) {
+			/* 40Mhz Xtal */
+			cpu_clk = 40 * fbdiv * 1000 * 1000;
+		} else {
+			/* 20Mhz Xtal */
+			cpu_clk = 20 * fbdiv * 1000 * 1000;
+		}
+		break;
+	}
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
+	rt_memc_membase = plat_of_remap_node("mtk,mt7621-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
+	unsigned char *name = NULL;
+	u32 n0;
+	u32 n1;
+	u32 rev;
+
+	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+	if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
+		name = "MT7621";
+		soc_info->compatible = "mtk,mt7621-soc";
+	} else {
+		panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+	}
+
+	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"MediaTek %s ver:%u eco:%u",
+		name,
+		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+		(rev & CHIP_REV_ECO_MASK));
+
+	soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
+	soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
+	soc_info->mem_base = MT7621_DRAM_BASE;
+
+	rt2880_pinmux_data = mt7621_pinmux_data;
+
+	/* Early detection of CMP support */
+	mips_cm_probe();
+	mips_cpc_probe();
+
+	if (mips_cm_numiocu()) {
+		/*
+		 * mips_cm_probe() wipes out bootloader
+		 * config for CM regions and we have to configure them
+		 * again. This SoC cannot talk to pamlbus devices
+		 * witout proper iocu region set up.
+		 *
+		 * FIXME: it would be better to do this with values
+		 * from DT, but we need this very early because
+		 * without this we cannot talk to pretty much anything
+		 * including serial.
+		 */
+		write_gcr_reg0_base(MT7621_PALMBUS_BASE);
+		write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE |
+				    CM_GCR_REGn_MASK_CMTGT_IOCU0);
+	}
+
+	if (!register_cps_smp_ops())
+		return;
+	if (!register_cmp_smp_ops())
+		return;
+	if (!register_vsmp_smp_ops())
+		return;
+}
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
index 844f5cd55..3c84166eb 100644
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -119,5 +119,5 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
 
 	rt2880_pinmux_data = rt2880_pinmux_data_act;
-	ralink_soc == RT2880_SOC;
+	ralink_soc = RT2880_SOC;
 }
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index 9e4572592..d7c4ba43a 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -201,6 +201,7 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("cpu", cpu_rate);
 	ralink_clk_add("sys", sys_rate);
 	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
 	ralink_clk_add("10000100.timer", wdt_rate);
 	ralink_clk_add("10000120.watchdog", wdt_rate);
 	ralink_clk_add("10000500.uart", uart_rate);
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
index 582995aaa..fafec947b 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -109,6 +109,7 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("10000120.watchdog", sys_rate);
 	ralink_clk_add("10000500.uart", 40000000);
 	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
 	ralink_clk_add("10000c00.uartlite", 40000000);
 	ralink_clk_add("10100000.ethernet", sys_rate);
 	ralink_clk_add("10180000.wmac", 40000000);
diff --git a/arch/mips/ralink/timer-gic.c b/arch/mips/ralink/timer-gic.c
new file mode 100644
index 000000000..5b4f186bc
--- /dev/null
+++ b/arch/mips/ralink/timer-gic.c
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+
+#include "common.h"
+
+void __init plat_time_init(void)
+{
+	ralink_of_remap();
+
+	of_clk_init(NULL);
+	clocksource_probe();
+}