Linux-libre 4.4-gnupck-4.4-gnu

10 files changed, 102 insertions, 27 deletions

diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
index a8e70a9f2..e46f91f97 100644
--- a/arch/mips/ralink/cevt-rt3352.c
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -48,7 +48,7 @@ static int systick_next_event(unsigned long delta,
 	sdev = container_of(evt, struct systick_device, dev);
 	count = ioread32(sdev->membase + SYSTICK_COUNT);
 	count = (count + delta) % SYSTICK_FREQ;
-	iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
+	iowrite32(count, sdev->membase + SYSTICK_COMPARE);
 
 	return 0;
 }
diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
index feb5a9bf9..25c4a6177 100644
--- a/arch/mips/ralink/clk.c
+++ b/arch/mips/ralink/clk.c
@@ -75,5 +75,5 @@ void __init plat_time_init(void)
 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
 	mips_hpt_frequency = clk_get_rate(clk) / 2;
 	clk_put(clk);
-	clocksource_of_init();
+	clocksource_probe();
 }
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
index 255d695ec..3c59ffe5f 100644
--- a/arch/mips/ralink/early_printk.c
+++ b/arch/mips/ralink/early_printk.c
@@ -25,11 +25,13 @@
 #define MT7628_CHIP_NAME1	0x20203832
 
 #define UART_REG_TX		0x04
+#define UART_REG_LCR		0x0c
 #define UART_REG_LSR		0x14
 #define UART_REG_LSR_RT2880	0x1c
 
 static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
 static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
+static int init_complete;
 
 static inline void uart_w32(u32 val, unsigned reg)
 {
@@ -47,8 +49,32 @@ static inline int soc_is_mt7628(void)
 		(__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
 }
 
+static void find_uart_base(void)
+{
+	int i;
+
+	if (!soc_is_mt7628())
+		return;
+
+	for (i = 0; i < 3; i++) {
+		u32 reg = uart_r32(UART_REG_LCR + (0x100 * i));
+
+		if (!reg)
+			continue;
+
+		uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE +
+							  (0x100 * i));
+		break;
+	}
+}
+
 void prom_putchar(unsigned char ch)
 {
+	if (!init_complete) {
+		find_uart_base();
+		init_complete = 1;
+	}
+
 	if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
 		uart_w32(ch, UART_TX);
 		while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index 2ea5ff6dc..dfb04fced 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -37,8 +37,17 @@
 #define PMU1_CFG		0x8C
 #define DIG_SW_SEL		BIT(25)
 
-/* is this a MT7620 or a MT7628 */
-enum mt762x_soc_type mt762x_soc;
+/* clock scaling */
+#define CLKCFG_FDIV_MASK	0x1f00
+#define CLKCFG_FDIV_USB_VAL	0x0300
+#define CLKCFG_FFRAC_MASK	0x001f
+#define CLKCFG_FFRAC_USB_VAL	0x0003
+
+/* EFUSE bits */
+#define EFUSE_MT7688		0x100000
+
+/* DRAM type bit */
+#define DRAM_TYPE_MT7628_MASK	0x1
 
 /* does the board have sdram or ddram */
 static int dram_type;
@@ -227,6 +236,12 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
 	{ 0 }
 };
 
+static inline int is_mt76x8(void)
+{
+	return ralink_soc == MT762X_SOC_MT7628AN ||
+	       ralink_soc == MT762X_SOC_MT7688;
+}
+
 static __init u32
 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
 {
@@ -381,7 +396,7 @@ void __init ralink_clk_init(void)
 #define RINT(x)		((x) / 1000000)
 #define RFRAC(x)	(((x) / 1000) % 1000)
 
-	if (mt762x_soc == MT762X_SOC_MT7628AN) {
+	if (is_mt76x8()) {
 		if (xtal_rate == MHZ(40))
 			cpu_rate = MHZ(580);
 		else
@@ -423,6 +438,20 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("10000b00.spi", sys_rate);
 	ralink_clk_add("10000c00.uartlite", periph_rate);
 	ralink_clk_add("10180000.wmac", xtal_rate);
+
+	if (IS_ENABLED(CONFIG_USB) && is_mt76x8()) {
+		/*
+		 * When the CPU goes into sleep mode, the BUS clock will be
+		 * too low for USB to function properly. Adjust the busses
+		 * fractional divider to fix this
+		 */
+		u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+		val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
+		val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
+
+		rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
+	}
 }
 
 void __init ralink_of_remap(void)
@@ -499,20 +528,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 	if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
 		if (bga) {
-			mt762x_soc = MT762X_SOC_MT7620A;
+			ralink_soc = MT762X_SOC_MT7620A;
 			name = "MT7620A";
 			soc_info->compatible = "ralink,mt7620a-soc";
 		} else {
-			mt762x_soc = MT762X_SOC_MT7620N;
+			ralink_soc = MT762X_SOC_MT7620N;
 			name = "MT7620N";
 			soc_info->compatible = "ralink,mt7620n-soc";
-#ifdef CONFIG_PCI
-			panic("mt7620n is only supported for non pci kernels");
-#endif
 		}
 	} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
-		mt762x_soc = MT762X_SOC_MT7628AN;
-		name = "MT7628AN";
+		u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+
+		if (efuse & EFUSE_MT7688) {
+			ralink_soc = MT762X_SOC_MT7688;
+			name = "MT7688";
+		} else {
+			ralink_soc = MT762X_SOC_MT7628AN;
+			name = "MT7628AN";
+		}
 		soc_info->compatible = "ralink,mt7628an-soc";
 	} else {
 		panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
@@ -525,10 +558,14 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 		(rev & CHIP_REV_ECO_MASK));
 
 	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
-	dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
+	if (is_mt76x8())
+		dram_type = cfg0 & DRAM_TYPE_MT7628_MASK;
+	else
+		dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) &
+			    SYSCFG0_DRAM_TYPE_MASK;
 
 	soc_info->mem_base = MT7620_DRAM_BASE;
-	if (mt762x_soc == MT762X_SOC_MT7628AN)
+	if (is_mt76x8())
 		mt7628_dram_init(soc_info);
 	else
 		mt7620_dram_init(soc_info);
@@ -541,7 +578,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	pr_info("Digital PMU set to %s control\n",
 		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
 
-	if (mt762x_soc == MT762X_SOC_MT7628AN)
+	if (is_mt76x8())
 		rt2880_pinmux_data = mt7628an_pinmux_data;
 	else
 		rt2880_pinmux_data = mt7620a_pinmux_data;
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 0d30dcd63..f9eda5d8f 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -74,8 +74,6 @@ void __init plat_mem_setup(void)
 	 */
 	__dt_setup_arch(__dtb_start);
 
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-
 	of_scan_flat_dt(early_init_dt_find_memory, NULL);
 	if (memory_dtb)
 		of_scan_flat_dt(early_init_dt_scan_memory, NULL);
diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
index 09419f67d..39a9142f7 100644
--- a/arch/mips/ralink/prom.c
+++ b/arch/mips/ralink/prom.c
@@ -15,11 +15,16 @@
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 
+#include <asm/mach-ralink/ralink_regs.h>
+
 #include "common.h"
 
 struct ralink_soc_info soc_info;
 struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
 
+enum ralink_soc_type ralink_soc;
+EXPORT_SYMBOL_GPL(ralink_soc);
+
 const char *get_system_type(void)
 {
 	return soc_info.sys_type;
diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
index 55c7ec59d..ee117c4bc 100644
--- a/arch/mips/ralink/reset.c
+++ b/arch/mips/ralink/reset.c
@@ -11,6 +11,7 @@
 #include <linux/pm.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/delay.h>
 #include <linux/reset-controller.h>
 
 #include <asm/reboot.h>
@@ -18,8 +19,10 @@
 #include <asm/mach-ralink/ralink_regs.h>
 
 /* Reset Control */
-#define SYSC_REG_RESET_CTRL     0x034
-#define RSTCTL_RESET_SYSTEM     BIT(0)
+#define SYSC_REG_RESET_CTRL	0x034
+
+#define RSTCTL_RESET_PCI	BIT(26)
+#define RSTCTL_RESET_SYSTEM	BIT(0)
 
 static int ralink_assert_device(struct reset_controller_dev *rcdev,
 				unsigned long id)
@@ -83,6 +86,11 @@ void ralink_rst_init(void)
 
 static void ralink_restart(char *command)
 {
+	if (IS_ENABLED(CONFIG_PCI)) {
+		rt_sysc_m32(0, RSTCTL_RESET_PCI, SYSC_REG_RESET_CTRL);
+		mdelay(50);
+	}
+
 	local_irq_disable();
 	rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
 	unreachable();
@@ -98,7 +106,6 @@ static int __init mips_reboot_setup(void)
 {
 	_machine_restart = ralink_restart;
 	_machine_halt = ralink_halt;
-	pm_power_off = ralink_halt;
 
 	return 0;
 }
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
index 738cec865..844f5cd55 100644
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -119,4 +119,5 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
 
 	rt2880_pinmux_data = rt2880_pinmux_data_act;
+	ralink_soc == RT2880_SOC;
 }
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index c40776ab6..9e4572592 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -21,8 +21,6 @@
 
 #include "common.h"
 
-enum rt305x_soc_type rt305x_soc;
-
 static struct rt2880_pmx_func i2c_func[] =  { FUNC("i2c", 0, 1, 2) };
 static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
 static struct rt2880_pmx_func uartf_func[] = {
@@ -201,6 +199,7 @@ void __init ralink_clk_init(void)
 	}
 
 	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("sys", sys_rate);
 	ralink_clk_add("10000b00.spi", sys_rate);
 	ralink_clk_add("10000100.timer", wdt_rate);
 	ralink_clk_add("10000120.watchdog", wdt_rate);
@@ -235,24 +234,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 		icache_sets = (read_c0_config1() >> 22) & 7;
 		if (icache_sets == 1) {
-			rt305x_soc = RT305X_SOC_RT3050;
+			ralink_soc = RT305X_SOC_RT3050;
 			name = "RT3050";
 			soc_info->compatible = "ralink,rt3050-soc";
 		} else {
-			rt305x_soc = RT305X_SOC_RT3052;
+			ralink_soc = RT305X_SOC_RT3052;
 			name = "RT3052";
 			soc_info->compatible = "ralink,rt3052-soc";
 		}
 	} else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT3350;
+		ralink_soc = RT305X_SOC_RT3350;
 		name = "RT3350";
 		soc_info->compatible = "ralink,rt3350-soc";
 	} else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT3352;
+		ralink_soc = RT305X_SOC_RT3352;
 		name = "RT3352";
 		soc_info->compatible = "ralink,rt3352-soc";
 	} else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT5350;
+		ralink_soc = RT305X_SOC_RT5350;
 		name = "RT5350";
 		soc_info->compatible = "ralink,rt5350-soc";
 	} else {
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
index 86a535c77..582995aaa 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -153,4 +153,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
 
 	rt2880_pinmux_data = rt3883_pinmux_data;
+
+	ralink_soc == RT3883_SOC;
 }