Initial import

1 files changed, 235 insertions, 0 deletions

diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
new file mode 100644
index 000000000..6b009c45a
--- /dev/null
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -0,0 +1,235 @@
+/*
+ * ip22-mc.c: Routines for manipulating SGI Memory Controller.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu) - Indigo2 changes
+ * Copyright (C) 2003 Ladislav Michl  (ladis@linux-mips.org)
+ * Copyright (C) 2004 Peter Fuerst    (pf@net.alphadv.de) - IP28
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/sgialib.h>
+#include <asm/sgi/mc.h>
+#include <asm/sgi/hpc3.h>
+#include <asm/sgi/ip22.h>
+
+struct sgimc_regs *sgimc;
+
+EXPORT_SYMBOL(sgimc);
+
+static inline unsigned long get_bank_addr(unsigned int memconfig)
+{
+	return (memconfig & SGIMC_MCONFIG_BASEADDR) << ((sgimc->systemid & SGIMC_SYSID_MASKREV) >= 5 ? 24 : 22);
+}
+
+static inline unsigned long get_bank_size(unsigned int memconfig)
+{
+	return ((memconfig & SGIMC_MCONFIG_RMASK) + 0x0100) << ((sgimc->systemid & SGIMC_SYSID_MASKREV) >= 5 ? 16 : 14);
+}
+
+static inline unsigned int get_bank_config(int bank)
+{
+	unsigned int res = bank > 1 ? sgimc->mconfig1 : sgimc->mconfig0;
+	return bank % 2 ? res & 0xffff : res >> 16;
+}
+
+struct mem {
+	unsigned long addr;
+	unsigned long size;
+};
+
+/*
+ * Detect installed memory, do some sanity checks and notify kernel about it
+ */
+static void __init probe_memory(void)
+{
+	int i, j, found, cnt = 0;
+	struct mem bank[4];
+	struct mem space[2] = {{SGIMC_SEG0_BADDR, 0}, {SGIMC_SEG1_BADDR, 0}};
+
+	printk(KERN_INFO "MC: Probing memory configuration:\n");
+	for (i = 0; i < ARRAY_SIZE(bank); i++) {
+		unsigned int tmp = get_bank_config(i);
+		if (!(tmp & SGIMC_MCONFIG_BVALID))
+			continue;
+
+		bank[cnt].size = get_bank_size(tmp);
+		bank[cnt].addr = get_bank_addr(tmp);
+		printk(KERN_INFO " bank%d: %3ldM @ %08lx\n",
+			i, bank[cnt].size / 1024 / 1024, bank[cnt].addr);
+		cnt++;
+	}
+
+	/* And you thought bubble sort is dead algorithm... */
+	do {
+		unsigned long addr, size;
+
+		found = 0;
+		for (i = 1; i < cnt; i++)
+			if (bank[i-1].addr > bank[i].addr) {
+				addr = bank[i].addr;
+				size = bank[i].size;
+				bank[i].addr = bank[i-1].addr;
+				bank[i].size = bank[i-1].size;
+				bank[i-1].addr = addr;
+				bank[i-1].size = size;
+				found = 1;
+			}
+	} while (found);
+
+	/* Figure out how are memory banks mapped into spaces */
+	for (i = 0; i < cnt; i++) {
+		found = 0;
+		for (j = 0; j < ARRAY_SIZE(space) && !found; j++)
+			if (space[j].addr + space[j].size == bank[i].addr) {
+				space[j].size += bank[i].size;
+				found = 1;
+			}
+		/* There is either hole or overlapping memory */
+		if (!found)
+			printk(KERN_CRIT "MC: Memory configuration mismatch "
+					 "(%08lx), expect Bus Error soon\n",
+					 bank[i].addr);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(space); i++)
+		if (space[i].size)
+			add_memory_region(space[i].addr, space[i].size,
+					  BOOT_MEM_RAM);
+}
+
+void __init sgimc_init(void)
+{
+	u32 tmp;
+
+	/* ioremap can't fail */
+	sgimc = (struct sgimc_regs *)
+		ioremap(SGIMC_BASE, sizeof(struct sgimc_regs));
+
+	printk(KERN_INFO "MC: SGI memory controller Revision %d\n",
+	       (int) sgimc->systemid & SGIMC_SYSID_MASKREV);
+
+	/* Place the MC into a known state.  This must be done before
+	 * interrupts are first enabled etc.
+	 */
+
+	/* Step 0: Make sure we turn off the watchdog in case it's
+	 *	   still running (which might be the case after a
+	 *	   soft reboot).
+	 */
+	tmp = sgimc->cpuctrl0;
+	tmp &= ~SGIMC_CCTRL0_WDOG;
+	sgimc->cpuctrl0 = tmp;
+
+	/* Step 1: The CPU/GIO error status registers will not latch
+	 *	   up a new error status until the register has been
+	 *	   cleared by the cpu.	These status registers are
+	 *	   cleared by writing any value to them.
+	 */
+	sgimc->cstat = sgimc->gstat = 0;
+
+	/* Step 2: Enable all parity checking in cpu control register
+	 *	   zero.
+	 */
+	/* don't touch parity settings for IP28 */
+	tmp = sgimc->cpuctrl0;
+#ifndef CONFIG_SGI_IP28
+	tmp |= SGIMC_CCTRL0_EPERRGIO | SGIMC_CCTRL0_EPERRMEM;
+#endif
+	tmp |= SGIMC_CCTRL0_R4KNOCHKPARR;
+	sgimc->cpuctrl0 = tmp;
+
+	/* Step 3: Setup the MC write buffer depth, this is controlled
+	 *	   in cpu control register 1 in the lower 4 bits.
+	 */
+	tmp = sgimc->cpuctrl1;
+	tmp &= ~0xf;
+	tmp |= 0xd;
+	sgimc->cpuctrl1 = tmp;
+
+	/* Step 4: Initialize the RPSS divider register to run as fast
+	 *	   as it can correctly operate.	 The register is laid
+	 *	   out as follows:
+	 *
+	 *	   ----------------------------------------
+	 *	   |  RESERVED	|   INCREMENT	| DIVIDER |
+	 *	   ----------------------------------------
+	 *	    31	      16 15	       8 7	 0
+	 *
+	 *	   DIVIDER determines how often a 'tick' happens,
+	 *	   INCREMENT determines by how the RPSS increment
+	 *	   registers value increases at each 'tick'. Thus,
+	 *	   for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
+	 */
+	sgimc->divider = 0x101;
+
+	/* Step 5: Initialize GIO64 arbitrator configuration register.
+	 *
+	 * NOTE: HPC init code in sgihpc_init() must run before us because
+	 *	 we need to know Guiness vs. FullHouse and the board
+	 *	 revision on this machine. You have been warned.
+	 */
+
+	/* First the basic invariants across all GIO64 implementations. */
+	tmp = sgimc->giopar & SGIMC_GIOPAR_GFX64; /* keep gfx 64bit settings */
+	tmp |= SGIMC_GIOPAR_HPC64;	/* All 1st HPC's interface at 64bits */
+	tmp |= SGIMC_GIOPAR_ONEBUS;	/* Only one physical GIO bus exists */
+
+	if (ip22_is_fullhouse()) {
+		/* Fullhouse specific settings. */
+		if (SGIOC_SYSID_BOARDREV(sgioc->sysid) < 2) {
+			tmp |= SGIMC_GIOPAR_HPC264;	/* 2nd HPC at 64bits */
+			tmp |= SGIMC_GIOPAR_PLINEEXP0;	/* exp0 pipelines */
+			tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */
+			tmp |= SGIMC_GIOPAR_RTIMEEXP0;	/* exp0 is realtime */
+		} else {
+			tmp |= SGIMC_GIOPAR_HPC264;	/* 2nd HPC 64bits */
+			tmp |= SGIMC_GIOPAR_PLINEEXP0;	/* exp[01] pipelined */
+			tmp |= SGIMC_GIOPAR_PLINEEXP1;
+			tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */
+		}
+	} else {
+		/* Guiness specific settings. */
+		tmp |= SGIMC_GIOPAR_EISA64;	/* MC talks to EISA at 64bits */
+		tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */
+	}
+	sgimc->giopar = tmp;	/* poof */
+
+	probe_memory();
+}
+
+void __init prom_meminit(void) {}
+void __init prom_free_prom_memory(void)
+{
+#ifdef CONFIG_SGI_IP28
+	u32 mconfig1;
+	unsigned long flags;
+	spinlock_t lock;
+
+	/*
+	 * because ARCS accesses memory uncached we wait until ARCS
+	 * isn't needed any longer, before we switch from slow to
+	 * normal mode
+	 */
+	spin_lock_irqsave(&lock, flags);
+	mconfig1 = sgimc->mconfig1;
+	/* map ECC register */
+	sgimc->mconfig1 = (mconfig1 & 0xffff0000) | 0x2060;
+	iob();
+	/* switch to normal mode */
+	*(unsigned long *)PHYS_TO_XKSEG_UNCACHED(0x60000000) = 0;
+	iob();
+	/* reduce WR_COL */
+	sgimc->cmacc = (sgimc->cmacc & ~0xf) | 4;
+	iob();
+	/* restore old config */
+	sgimc->mconfig1 = mconfig1;
+	iob();
+	spin_unlock_irqrestore(&lock, flags);
+#endif
+}