Linux-libre 4.4-gnupck-4.4-gnu

174 files changed, 4539 insertions, 985 deletions

diff --git a/arch/mips/Kbuild b/arch/mips/Kbuild
index dd2953358..5c3f688a5 100644
--- a/arch/mips/Kbuild
+++ b/arch/mips/Kbuild
@@ -17,6 +17,7 @@ obj- := $(platform-)
 obj-y += kernel/
 obj-y += mm/
 obj-y += net/
+obj-y += vdso/
 
 ifdef CONFIG_KVM
 obj-y += kvm/
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index a424e46b5..a96c81d1d 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -33,6 +33,7 @@ platforms += sibyte
 platforms += sni
 platforms += txx9
 platforms += vr41xx
+platforms += xilfpga
 
 # include the platform specific files
 include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e3aa5b0b4..71683a853 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -5,6 +5,7 @@ config MIPS
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
+	select ARCH_USE_BUILTIN_BSWAP
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IDE
@@ -60,6 +61,8 @@ config MIPS
 	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select HAVE_IRQ_TIME_ACCOUNTING
+	select GENERIC_TIME_VSYSCALL
+	select ARCH_CLOCKSOURCE_DATA
 
 menu "Machine selection"
 
@@ -401,6 +404,28 @@ config MACH_PISTACHIO
 	help
 	  This enables support for the IMG Pistachio SoC platform.
 
+config MACH_XILFPGA
+	bool "MIPSfpga Xilinx based boards"
+	select ARCH_REQUIRE_GPIOLIB
+	select BOOT_ELF32
+	select BOOT_RAW
+	select BUILTIN_DTB
+	select CEVT_R4K
+	select COMMON_CLK
+	select CSRC_R4K
+	select IRQ_MIPS_CPU
+	select LIBFDT
+	select MIPS_CPU_SCACHE
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_ZBOOT_UART16550
+	select USE_OF
+	select USE_GENERIC_EARLY_PRINTK_8250
+	help
+	  This enables support for the IMG University Program MIPSfpga platform.
+
 config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
@@ -424,6 +449,7 @@ config MIPS_MALTA
 	select MIPS_L1_CACHE_SHIFT_6
 	select PCI_GT64XXX_PCI0
 	select MIPS_MSC
+	select SMP_UP if SMP
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -449,6 +475,8 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_ZBOOT
 	select USE_OF
 	select ZONE_DMA32 if 64BIT
+	select BUILTIN_DTB
+	select LIBFDT
 	help
 	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
@@ -964,6 +992,7 @@ source "arch/mips/loongson32/Kconfig"
 source "arch/mips/loongson64/Kconfig"
 source "arch/mips/netlogic/Kconfig"
 source "arch/mips/paravirt/Kconfig"
+source "arch/mips/xilfpga/Kconfig"
 
 endmenu
 
@@ -1036,6 +1065,9 @@ config CSRC_R4K
 config CSRC_SB1250
 	bool
 
+config MIPS_CLOCK_VSYSCALL
+	def_bool CSRC_R4K || CLKSRC_MIPS_GIC
+
 config GPIO_TXX9
 	select ARCH_REQUIRE_GPIOLIB
 	bool
@@ -2529,6 +2561,9 @@ choice
 	help
 	 Allows the configuration of the timer frequency.
 
+	config HZ_24
+		bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ
+
 	config HZ_48
 		bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
 
@@ -2552,6 +2587,9 @@ choice
 
 endchoice
 
+config SYS_SUPPORTS_24HZ
+	bool
+
 config SYS_SUPPORTS_48HZ
 	bool
 
@@ -2575,13 +2613,18 @@ config SYS_SUPPORTS_1024HZ
 
 config SYS_SUPPORTS_ARBIT_HZ
 	bool
-	default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \
-		     !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \
-		     !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \
+	default y if !SYS_SUPPORTS_24HZ && \
+		     !SYS_SUPPORTS_48HZ && \
+		     !SYS_SUPPORTS_100HZ && \
+		     !SYS_SUPPORTS_128HZ && \
+		     !SYS_SUPPORTS_250HZ && \
+		     !SYS_SUPPORTS_256HZ && \
+		     !SYS_SUPPORTS_1000HZ && \
 		     !SYS_SUPPORTS_1024HZ
 
 config HZ
 	int
+	default 24 if HZ_24
 	default 48 if HZ_48
 	default 100 if HZ_100
 	default 128 if HZ_128
@@ -2685,7 +2728,7 @@ config BUILTIN_DTB
 	bool
 
 choice
-	prompt "Kernel appended dtb support" if OF
+	prompt "Kernel appended dtb support" if USE_OF
 	default MIPS_NO_APPENDED_DTB
 
 	config MIPS_NO_APPENDED_DTB
@@ -2693,6 +2736,20 @@ choice
 		help
 		  Do not enable appended dtb support.
 
+	config MIPS_ELF_APPENDED_DTB
+		bool "vmlinux"
+		help
+		  With this option, the boot code will look for a device tree binary
+		  DTB) included in the vmlinux ELF section .appended_dtb. By default
+		  it is empty and the DTB can be appended using binutils command
+		  objcopy:
+
+		    objcopy --update-section .appended_dtb=<filename>.dtb vmlinux
+
+		  This is meant as a backward compatiblity convenience for those
+		  systems with a bootloader that can't be upgraded to accommodate
+		  the documented boot protocol using a device tree.
+
 	config MIPS_RAW_APPENDED_DTB
 		bool "vmlinux.bin"
 		help
@@ -2729,6 +2786,25 @@ choice
 		  if you don't intend to always append a DTB.
 endchoice
 
+choice
+	prompt "Kernel command line type" if !CMDLINE_OVERRIDE
+	default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
+					 !MIPS_MALTA && !MIPS_SEAD3 && \
+					 !CAVIUM_OCTEON_SOC
+	default MIPS_CMDLINE_FROM_BOOTLOADER
+
+	config MIPS_CMDLINE_FROM_DTB
+		depends on USE_OF
+		bool "Dtb kernel arguments if available"
+
+	config MIPS_CMDLINE_DTB_EXTEND
+		depends on USE_OF
+		bool "Extend dtb kernel arguments with bootloader arguments"
+
+	config MIPS_CMDLINE_FROM_BOOTLOADER
+		bool "Bootloader kernel arguments if available"
+endchoice
+
 endmenu
 
 config LOCKDEP_SUPPORT
@@ -2739,6 +2815,10 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
+config HAVE_LATENCYTOP_SUPPORT
+	bool
+	default y
+
 config PGTABLE_LEVELS
 	int
 	default 3 if 64BIT && !PAGE_SIZE_64KB
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index e25052402..f0e314ceb 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -113,4 +113,76 @@ config SPINLOCK_TEST
 	help
 	  Add several files to the debugfs to test spinlock speed.
 
+if CPU_MIPSR6
+
+choice
+	prompt "Compact branch policy"
+	default MIPS_COMPACT_BRANCHES_OPTIMAL
+
+config MIPS_COMPACT_BRANCHES_NEVER
+	bool "Never (force delay slot branches)"
+	help
+	  Pass the -mcompact-branches=never flag to the compiler in order to
+	  force it to always emit branches with delay slots, and make no use
+	  of the compact branch instructions introduced by MIPSr6. This is
+	  useful if you suspect there may be an issue with compact branches in
+	  either the compiler or the CPU.
+
+config MIPS_COMPACT_BRANCHES_OPTIMAL
+	bool "Optimal (use where beneficial)"
+	help
+	  Pass the -mcompact-branches=optimal flag to the compiler in order for
+	  it to make use of compact branch instructions where it deems them
+	  beneficial, and use branches with delay slots elsewhere. This is the
+	  default compiler behaviour, and should be used unless you have a
+	  reason to choose otherwise.
+
+config MIPS_COMPACT_BRANCHES_ALWAYS
+	bool "Always (force compact branches)"
+	help
+	  Pass the -mcompact-branches=always flag to the compiler in order to
+	  force it to always emit compact branches, making no use of branch
+	  instructions with delay slots. This can result in more compact code
+	  which may be beneficial in some scenarios.
+
+endchoice
+
+endif # CPU_MIPSR6
+
+config SCACHE_DEBUGFS
+	bool "L2 cache debugfs entries"
+	depends on DEBUG_FS
+	help
+	  Enable this to allow parts of the L2 cache configuration, such as
+	  whether or not prefetching is enabled, to be exposed to userland
+	  via debugfs.
+
+	  If unsure, say N.
+
+menuconfig MIPS_CPS_NS16550
+	bool "CPS SMP NS16550 UART output"
+	depends on MIPS_CPS
+	help
+	  Output debug information via an ns16550 compatible UART if exceptions
+	  occur early in the boot process of a secondary core.
+
+if MIPS_CPS_NS16550
+
+config MIPS_CPS_NS16550_BASE
+	hex "UART Base Address"
+	default 0x1b0003f8 if MIPS_MALTA
+	help
+	  The base address of the ns16550 compatible UART on which to output
+	  debug information from the early stages of core startup.
+
+config MIPS_CPS_NS16550_SHIFT
+	int "UART Register Shift"
+	default 0 if MIPS_MALTA
+	help
+	  The number of bits to shift ns16550 register indices by in order to
+	  form their addresses. That is, log base 2 of the span between
+	  adjacent ns16550 registers in the system.
+
+endif # MIPS_CPS_NS16550
+
 endmenu
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 252e34795..3f70ba54a 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -204,6 +204,10 @@ toolchain-msa				:= $(call cc-option-yn,$(mips-cflags) -mhard-float -mfp64 -Wa$(
 cflags-$(toolchain-msa)			+= -DTOOLCHAIN_SUPPORTS_MSA
 endif
 
+cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_NEVER)	+= -mcompact-branches=never
+cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_OPTIMAL)	+= -mcompact-branches=optimal
+cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_ALWAYS)	+= -mcompact-branches=always
+
 #
 # Firmware support
 #
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 9a0013703..8755d618e 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -281,3 +281,8 @@ MIPS_MACHINE(ATH79_MACH_GENERIC,
 	     "Generic",
 	     "Generic AR71XX/AR724X/AR913X based board",
 	     ath79_generic_init);
+
+MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
+	     "DTB",
+	     "Generic AR71XX/AR724X/AR913X based board (DT)",
+	     NULL);
diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index 51ed599cc..e970fd9cf 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -4,6 +4,7 @@ config BCM47XX_SSB
 	bool "SSB Support for Broadcom BCM47XX"
 	select SYS_HAS_CPU_BMIPS32_3300
 	select SSB
+	select SSB_HOST_SOC
 	select SSB_DRIVER_MIPS
 	select SSB_DRIVER_EXTIF
 	select SSB_EMBEDDED
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 17503a059..6d38948f0 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -105,11 +105,28 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 				  struct ssb_init_invariants *iv)
 {
 	char buf[20];
+	int len, err;
 
 	/* Fill boardinfo structure */
 	memset(&iv->boardinfo, 0 , sizeof(struct ssb_boardinfo));
 
-	bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL);
+	len = bcm47xx_nvram_getenv("boardvendor", buf, sizeof(buf));
+	if (len > 0) {
+		err = kstrtou16(strim(buf), 0, &iv->boardinfo.vendor);
+		if (err)
+			pr_warn("Couldn't parse nvram board vendor entry with value \"%s\"\n",
+				buf);
+	}
+	if (!iv->boardinfo.vendor)
+		iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
+
+	len = bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf));
+	if (len > 0) {
+		err = kstrtou16(strim(buf), 0, &iv->boardinfo.type);
+		if (err)
+			pr_warn("Couldn't parse nvram board type entry with value \"%s\"\n",
+				buf);
+	}
 
 	memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
 	bcm47xx_fill_sprom(&iv->sprom, NULL, false);
diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c
index 2d5c7a7f2..a7e569c79 100644
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -60,9 +60,9 @@ static int get_nvram_var(const char *prefix, const char *postfix,
 }
 
 #define NVRAM_READ_VAL(type)						\
-static void nvram_read_ ## type (const char *prefix,			\
-				 const char *postfix, const char *name, \
-				 type *val, type allset, bool fallback) \
+static void nvram_read_ ## type(const char *prefix,			\
+				const char *postfix, const char *name,	\
+				type *val, type allset, bool fallback)	\
 {									\
 	char buf[100];							\
 	int err;							\
@@ -422,7 +422,10 @@ static void bcm47xx_fill_sprom_path_r4589(struct ssb_sprom *sprom,
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
-		struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i];
+		struct ssb_sprom_core_pwr_info *pwr_info;
+
+		pwr_info = &sprom->core_pwr_info[i];
+
 		snprintf(postfix, sizeof(postfix), "%i", i);
 		nvram_read_u8(prefix, postfix, "maxp2ga",
 			      &pwr_info->maxpwr_2g, 0, fallback);
@@ -470,7 +473,10 @@ static void bcm47xx_fill_sprom_path_r45(struct ssb_sprom *sprom,
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
-		struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i];
+		struct ssb_sprom_core_pwr_info *pwr_info;
+
+		pwr_info = &sprom->core_pwr_info[i];
+
 		snprintf(postfix, sizeof(postfix), "%i", i);
 		nvram_read_u16(prefix, postfix, "pa2gw3a",
 			       &pwr_info->pa_2g[3], 0, fallback);
@@ -535,10 +541,11 @@ static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
 	nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
 
 	/* The address prefix 00:90:4C is used by Broadcom in their initial
-	   configuration. When a mac address with the prefix 00:90:4C is used
-	   all devices from the same series are sharing the same mac address.
-	   To prevent mac address collisions we replace them with a mac address
-	   based on the base address. */
+	 * configuration. When a mac address with the prefix 00:90:4C is used
+	 * all devices from the same series are sharing the same mac address.
+	 * To prevent mac address collisions we replace them with a mac address
+	 * based on the base address.
+	 */
 	if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
 		u8 mac[6];
 
@@ -592,32 +599,23 @@ void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
 	bcm47xx_sprom_fill_auto(sprom, prefix, fallback);
 }
 
-#ifdef CONFIG_BCM47XX_SSB
-void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
-				const char *prefix)
-{
-	nvram_read_u16(prefix, NULL, "boardvendor", &boardinfo->vendor, 0,
-		       true);
-	if (!boardinfo->vendor)
-		boardinfo->vendor = SSB_BOARDVENDOR_BCM;
-
-	nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0, true);
-}
-#endif
-
 #if defined(CONFIG_BCM47XX_SSB)
 static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
 {
 	char prefix[10];
 
-	if (bus->bustype == SSB_BUSTYPE_PCI) {
+	switch (bus->bustype) {
+	case SSB_BUSTYPE_SSB:
+		bcm47xx_fill_sprom(out, NULL, false);
+		return 0;
+	case SSB_BUSTYPE_PCI:
 		memset(out, 0, sizeof(struct ssb_sprom));
 		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
 			 bus->host_pci->bus->number + 1,
 			 PCI_SLOT(bus->host_pci->devfn));
 		bcm47xx_fill_sprom(out, prefix, false);
 		return 0;
-	} else {
+	default:
 		pr_warn("Unable to fill SPROM for given bustype.\n");
 		return -EINVAL;
 	}
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 33727e7f0..b2097c0d2 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -7,6 +7,8 @@
  * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
@@ -31,7 +33,6 @@
 
 #include <uapi/linux/bcm933xx_hcs.h>
 
-#define PFX	"board_bcm963xx: "
 
 #define HCS_OFFSET_128K			0x20000
 
@@ -740,7 +741,7 @@ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
 		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
 		return 0;
 	} else {
-		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+		pr_err("unable to fill SPROM for given bustype\n");
 		return -EINVAL;
 	}
 }
@@ -784,7 +785,7 @@ void __init board_prom_init(void)
 			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
 	else
 		strcpy(cfe_version, "unknown");
-	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
+	pr_info("CFE version: %s\n", cfe_version);
 
 	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
 
@@ -808,8 +809,7 @@ void __init board_prom_init(void)
 		char name[17];
 		memcpy(name, board_name, 16);
 		name[16] = 0;
-		printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
-		       name);
+		pr_err("unknown bcm963xx board: %s\n", name);
 		return;
 	}
 
@@ -854,7 +854,7 @@ void __init board_setup(void)
 {
 	if (!board.name[0])
 		panic("unable to detect bcm963xx board");
-	printk(KERN_INFO PFX "board name: %s\n", board.name);
+	pr_info("board name: %s\n", board.name);
 
 	/* make sure we're running on expected cpu */
 	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
@@ -910,7 +910,7 @@ int __init board_register_devices(void)
 		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
 		if (ssb_arch_register_fallback_sprom(
 				&bcm63xx_get_fallback_sprom) < 0)
-			pr_err(PFX "failed to register fallback SPROM\n");
+			pr_err("failed to register fallback SPROM\n");
 	}
 #endif
 
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index 307ec8b8e..1c7c3fbfa 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -376,10 +376,10 @@ void __init bcm63xx_cpu_init(void)
 	bcm63xx_cpu_freq = detect_cpu_clock();
 	bcm63xx_memory_size = detect_memory_size();
 
-	printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n",
-	       bcm63xx_cpu_id, bcm63xx_cpu_rev);
-	printk(KERN_INFO "CPU frequency is %u MHz\n",
-	       bcm63xx_cpu_freq / 1000000);
-	printk(KERN_INFO "%uMB of RAM installed\n",
-	       bcm63xx_memory_size >> 20);
+	pr_info("Detected Broadcom 0x%04x CPU revision %02x\n",
+		bcm63xx_cpu_id, bcm63xx_cpu_rev);
+	pr_info("CPU frequency is %u MHz\n",
+		bcm63xx_cpu_freq / 1000000);
+	pr_info("%uMB of RAM installed\n",
+		bcm63xx_memory_size >> 20);
 }
diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
index a551bab5e..9496cd236 100644
--- a/arch/mips/bcm63xx/dev-pcmcia.c
+++ b/arch/mips/bcm63xx/dev-pcmcia.c
@@ -139,6 +139,6 @@ int __init bcm63xx_pcmcia_register(void)
 	return platform_device_register(&bcm63xx_pcmcia_device);
 
 out_err:
-	printk(KERN_ERR "unable to set pcmcia chip select\n");
+	pr_err("unable to set pcmcia chip select\n");
 	return ret;
 }
diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c
index ad448e41e..232385441 100644
--- a/arch/mips/bcm63xx/dev-spi.c
+++ b/arch/mips/bcm63xx/dev-spi.c
@@ -18,29 +18,6 @@
 #include <bcm63xx_dev_spi.h>
 #include <bcm63xx_regs.h>
 
-/*
- * register offsets
- */
-static const unsigned long bcm6348_regs_spi[] = {
-	__GEN_SPI_REGS_TABLE(6348)
-};
-
-static const unsigned long bcm6358_regs_spi[] = {
-	__GEN_SPI_REGS_TABLE(6358)
-};
-
-const unsigned long *bcm63xx_regs_spi;
-EXPORT_SYMBOL(bcm63xx_regs_spi);
-
-static __init void bcm63xx_spi_regs_init(void)
-{
-	if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
-		bcm63xx_regs_spi = bcm6348_regs_spi;
-	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() ||
-		BCMCPU_IS_6362() || BCMCPU_IS_6368())
-		bcm63xx_regs_spi = bcm6358_regs_spi;
-}
-
 static struct resource spi_resources[] = {
 	{
 		.start		= -1, /* filled at runtime */
@@ -53,19 +30,10 @@ static struct resource spi_resources[] = {
 	},
 };
 
-static struct bcm63xx_spi_pdata spi_pdata = {
-	.bus_num		= 0,
-	.num_chipselect		= 8,
-};
-
 static struct platform_device bcm63xx_spi_device = {
-	.name		= "bcm63xx-spi",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(spi_resources),
 	.resource	= spi_resources,
-	.dev		= {
-		.platform_data = &spi_pdata,
-	},
 };
 
 int __init bcm63xx_spi_register(void)
@@ -78,21 +46,15 @@ int __init bcm63xx_spi_register(void)
 	spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
 
 	if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
+		bcm63xx_spi_device.name = "bcm6348-spi",
 		spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1;
-		spi_pdata.fifo_size = SPI_6348_MSG_DATA_SIZE;
-		spi_pdata.msg_type_shift = SPI_6348_MSG_TYPE_SHIFT;
-		spi_pdata.msg_ctl_width = SPI_6348_MSG_CTL_WIDTH;
 	}
 
 	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
 		BCMCPU_IS_6368()) {
+		bcm63xx_spi_device.name = "bcm6358-spi",
 		spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
-		spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
-		spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
-		spi_pdata.msg_ctl_width = SPI_6358_MSG_CTL_WIDTH;
 	}
 
-	bcm63xx_spi_regs_init();
-
 	return platform_device_register(&bcm63xx_spi_device);
 }
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
index 1a47ec2a0..c96139097 100644
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
@@ -311,7 +311,7 @@ static int bcm63xx_external_irq_set_type(struct irq_data *d,
 		break;
 
 	default:
-		printk(KERN_ERR "bogus flow type combination given !\n");
+		pr_err("bogus flow type combination given !\n");
 		return -EINVAL;
 	}
 
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index 240fb4ffa..2be9caaa2 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -24,7 +24,7 @@
 
 void bcm63xx_machine_halt(void)
 {
-	printk(KERN_INFO "System halted\n");
+	pr_info("System halted\n");
 	while (1)
 		;
 }
@@ -34,7 +34,7 @@ static void bcm6348_a1_reboot(void)
 	u32 reg;
 
 	/* soft reset all blocks */
-	printk(KERN_INFO "soft-resetting all blocks ...\n");
+	pr_info("soft-resetting all blocks ...\n");
 	reg = bcm_perf_readl(PERF_SOFTRESET_REG);
 	reg &= ~SOFTRESET_6348_ALL;
 	bcm_perf_writel(reg, PERF_SOFTRESET_REG);
@@ -46,7 +46,7 @@ static void bcm6348_a1_reboot(void)
 	mdelay(10);
 
 	/* Jump to the power on address. */
-	printk(KERN_INFO "jumping to reset vector.\n");
+	pr_info("jumping to reset vector.\n");
 	/* set high vectors (base at 0xbfc00000 */
 	set_c0_status(ST0_BEV | ST0_ERL);
 	/* run uncached in kseg0 */
@@ -110,7 +110,7 @@ void bcm63xx_machine_reboot(void)
 	if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
 		bcm6348_a1_reboot();
 
-	printk(KERN_INFO "triggering watchdog soft-reset...\n");
+	pr_info("triggering watchdog soft-reset...\n");
 	if (BCMCPU_IS_6328()) {
 		bcm_wdt_writel(1, WDT_SOFTRESET_REG);
 	} else {
diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c
index 5f1135981..2110359c0 100644
--- a/arch/mips/bcm63xx/timer.c
+++ b/arch/mips/bcm63xx/timer.c
@@ -195,7 +195,7 @@ int bcm63xx_timer_init(void)
 	irq = bcm63xx_get_irq_number(IRQ_TIMER);
 	ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL);
 	if (ret) {
-		printk(KERN_ERR "bcm63xx_timer: failed to register irq\n");
+		pr_err("%s: failed to register irq\n", __func__);
 		return ret;
 	}
 
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index 526ec2789..5b16d2955 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -157,7 +157,6 @@ void __init plat_mem_setup(void)
 		panic("no dtb found");
 
 	__dt_setup_arch(dtb);
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 
 	for (q = bmips_quirk_list; q->quirk_fn; q++) {
 		if (of_flat_dt_is_compatible(of_get_flat_dt_root(),
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index 778a34028..a0bf516ec 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -6,9 +6,13 @@ dts-dirs	+= mti
 dts-dirs	+= netlogic
 dts-dirs	+= qca
 dts-dirs	+= ralink
+dts-dirs	+= xilfpga
 
 obj-y		:= $(addsuffix /, $(dts-dirs))
 
+dtstree		:= $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(foreach d,$(dts-dirs), $(wildcard $(dtstree)/$(d)/*.dts)))
+
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
 clean-files	:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index d817bb46b..d4bf52cfc 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -87,14 +87,32 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0xf000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <59>;
+			interrupts = <59>, <57>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <60>, <58>, <62>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
@@ -144,6 +162,56 @@
 			status = "disabled";
 		};
 
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@406380 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406380 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		bsce: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bsce";
+		      status = "disabled";
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -246,5 +314,47 @@
 			interrupts = <76>;
 			status = "disabled";
 		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			brcm,broken-ncq;
+			brcm,broken-phy;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@1800000 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index 277a90adc..8e2501694 100644
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -81,14 +81,32 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0x7000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <56>;
+			interrupts = <56>, <54>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <57>, <55>, <59>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
@@ -138,6 +156,46 @@
 			status = "disabled";
 		};
 
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index 9e1e571ba..7e5f76040 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -81,14 +81,32 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0x7000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <56>;
+			interrupts = <56>, <54>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <57>, <55>, <59>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
@@ -138,6 +156,46 @@
 			status = "disabled";
 		};
 
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index 6e65db86f..c739ea77a 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -87,14 +87,32 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0x7000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <56>;
+			interrupts = <56>, <54>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <57>, <55>, <59>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
@@ -144,6 +162,36 @@
 			status = "disabled";
 		};
 
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscd: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -189,5 +237,47 @@
 			interrupts = <66>;
 			status = "disabled";
 		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <86>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			brcm,broken-ncq;
+			brcm,broken-phy;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@1800000 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index 5b660b617..e24d41ab4 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -221,5 +221,47 @@
 			interrupts = <73>;
 			status = "disabled";
 		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			brcm,broken-ncq;
+			brcm,broken-phy;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@1800000 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index 3fe0445b9..d3d28816a 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -29,6 +29,26 @@
 	status = "okay";
 };
 
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&bsce {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -64,3 +84,11 @@
 &ohci3 {
 	status = "okay";
 };
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index a8dc01e30..02ce6b429 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -29,6 +29,22 @@
 	status = "okay";
 };
 
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index eee8b0e32..d48462e09 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -29,6 +29,22 @@
 	status = "okay";
 };
 
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
index 739c2ef56..3cfcaebe7 100644
--- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -29,6 +29,18 @@
 	status = "okay";
 };
 
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -40,3 +52,11 @@
 &ohci0 {
 	status = "okay";
 };
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts
index c678115f5..b18c46637 100644
--- a/arch/mips/boot/dts/mti/malta.dts
+++ b/arch/mips/boot/dts/mti/malta.dts
@@ -1,5 +1,9 @@
 /dts-v1/;
 
+/memreserve/ 0x00000000 0x00001000;	/* YAMON exception vectors */
+/memreserve/ 0x00001000 0x000ef000;	/* YAMON */
+/memreserve/ 0x000f0000 0x00010000;	/* PIIX4 ISA memory */
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index fb7734ead..13d043949 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -107,7 +107,7 @@
 			miscintc: interrupt-controller@18060010 {
 				compatible = "qca,ar9132-misc-intc",
 					   "qca,ar7100-misc-intc";
-				reg = <0x18060010 0x4>;
+				reg = <0x18060010 0x8>;
 
 				interrupt-parent = <&cpuintc>;
 				interrupts = <6>;
diff --git a/arch/mips/boot/dts/xilfpga/Makefile b/arch/mips/boot/dts/xilfpga/Makefile
new file mode 100644
index 000000000..913a752a9
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/Makefile
@@ -0,0 +1,9 @@
+dtb-$(CONFIG_XILFPGA_NEXYS4DDR)	+= nexys4ddr.dtb
+
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj-				+= dummy.o
+
+always				:= $(dtb-y)
+clean-files	:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/xilfpga/microAptiv.dtsi b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi
new file mode 100644
index 000000000..81d518e75
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi
@@ -0,0 +1,21 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "img,xilfpga";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,m14Kc";
+			clocks	= <&ext>;
+			reg = <0>;
+		};
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
new file mode 100644
index 000000000..686ebd113
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
@@ -0,0 +1,46 @@
+/dts-v1/;
+
+#include "microAptiv.dtsi"
+
+/ {
+	compatible = "digilent,nexys4ddr";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	cpuintc: interrupt-controller@0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	axi_gpio: gpio@10600000 {
+		#gpio-cells = <1>;
+		compatible = "xlnx,xps-gpio-1.00.a";
+		gpio-controller;
+		reg = <0x10600000 0x10000>;
+		xlnx,all-inputs = <0x0>;
+		xlnx,dout-default = <0x0>;
+		xlnx,gpio-width = <0x16>;
+		xlnx,interrupt-present = <0x0>;
+		xlnx,is-dual = <0x0>;
+		xlnx,tri-default = <0xffffffff>;
+	} ;
+
+	axi_uart16550: serial@10400000 {
+		compatible = "ns16550a";
+		reg = <0x10400000 0x10000>;
+
+		reg-shift = <2>;
+		reg-offset = <0x1000>;
+
+		clocks	= <&ext>;
+	};
+};
+
+&ext {
+	clock-frequency = <50000000>;
+};
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 0352bc8d5..4f9eb0576 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -1094,7 +1094,7 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d,
 	unsigned int pin;
 	unsigned int trigger;
 
-	if (d->of_node != node)
+	if (irq_domain_get_of_node(d) != node)
 		return -EINVAL;
 
 	if (intsize < 2)
@@ -2163,7 +2163,7 @@ static int octeon_irq_cib_map(struct irq_domain *d,
 
 	if (hw >= host_data->max_bits) {
 		pr_err("ERROR: %s mapping %u is to big!\n",
-		       d->of_node->name, (unsigned)hw);
+		       irq_domain_get_of_node(d)->name, (unsigned)hw);
 		return -EINVAL;
 	}
 
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index bd634259e..cd7101fb6 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -1081,6 +1081,7 @@ void __init prom_free_prom_memory(void)
 
 int octeon_prune_device_tree(void);
 
+extern const char __appended_dtb;
 extern const char __dtb_octeon_3xxx_begin;
 extern const char __dtb_octeon_68xx_begin;
 void __init device_tree_init(void)
@@ -1088,11 +1089,19 @@ void __init device_tree_init(void)
 	const void *fdt;
 	bool do_prune;
 
+#ifdef CONFIG_MIPS_ELF_APPENDED_DTB
+	if (!fdt_check_header(&__appended_dtb)) {
+		fdt = &__appended_dtb;
+		do_prune = false;
+		pr_info("Using appended Device Tree.\n");
+	} else
+#endif
 	if (octeon_bootinfo->minor_version >= 3 && octeon_bootinfo->fdt_addr) {
 		fdt = phys_to_virt(octeon_bootinfo->fdt_addr);
 		if (fdt_check_header(fdt))
 			panic("Corrupt Device Tree passed to kernel.");
 		do_prune = false;
+		pr_info("Using passed Device Tree.\n");
 	} else if (OCTEON_IS_MODEL(OCTEON_CN68XX)) {
 		fdt = &__dtb_octeon_68xx_begin;
 		do_prune = true;
@@ -1106,8 +1115,6 @@ void __init device_tree_init(void)
 	if (do_prune) {
 		octeon_prune_device_tree();
 		pr_info("Using internal Device Tree.\n");
-	} else {
-		pr_info("Using passed Device Tree.\n");
 	}
 	unflatten_and_copy_device_tree();
 }
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 1cdff6b63..b3e7a1b61 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -122,20 +122,20 @@ CONFIG_EEPROM_MAX6875=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDETAPE=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_IT8213=m
 CONFIG_BLK_DEV_TC86C001=m
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
 CONFIG_ATA=y
 CONFIG_SATA_SIL24=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_IT8213=m
 CONFIG_PATA_SIL680=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
diff --git a/arch/mips/configs/bmips_be_defconfig b/arch/mips/configs/bmips_be_defconfig
index f5585c8f3..24dcb90b0 100644
--- a/arch/mips/configs/bmips_be_defconfig
+++ b/arch/mips/configs/bmips_be_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS_O32_FP64_SUPPORT=y
 # CONFIG_SWAP is not set
 CONFIG_NO_HZ=y
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_RD_GZIP is not set
+CONFIG_RD_GZIP=y
 CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -33,6 +33,7 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_BRCMSTB_GISB_ARB=y
 CONFIG_MTD=y
 CONFIG_MTD_CFI=y
diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig
index 400a47ec1..4eb5d6e9c 100644
--- a/arch/mips/configs/bmips_stb_defconfig
+++ b/arch/mips/configs/bmips_stb_defconfig
@@ -9,7 +9,7 @@ CONFIG_MIPS_O32_FP64_SUPPORT=y
 # CONFIG_SWAP is not set
 CONFIG_NO_HZ=y
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_RD_GZIP is not set
+CONFIG_RD_GZIP=y
 CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -34,6 +34,7 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_BRCMSTB_GISB_ARB=y
 CONFIG_MTD=y
 CONFIG_MTD_CFI=y
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 5135dc0b9..2924ba34a 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -31,9 +31,9 @@ CONFIG_NETWORK_SECMARK=y
 CONFIG_IP_SCTP=m
 CONFIG_FW_LOADER=m
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_PHYLIB=m
 CONFIG_MARVELL_PHY=m
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 0126e66d6..e94d266c4 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -14,9 +14,9 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_LEGACY=y
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index a75c65da0..87435897f 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -34,7 +34,7 @@ CONFIG_MIPS32_N32=y
 CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="/dev/hda3"
+CONFIG_PM_STD_PARTITION="/dev/sda3"
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -114,20 +114,16 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_VIA82CXXX=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_VIA=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_MACVLAN=m
 CONFIG_VETH=m
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
index 0179c7fa0..e620a2c3e 100644
--- a/arch/mips/configs/lasat_defconfig
+++ b/arch/mips/configs/lasat_defconfig
@@ -35,11 +35,11 @@ CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_CMD64X=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCI=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 54cc3853d..004cf52d1 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -108,16 +108,11 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_TASK_IOCTL=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_AMD74XX=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_AMD=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 61a4460d6..5afb4840a 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -241,14 +241,11 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
 CONFIG_RAID_ATTRS=m
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
@@ -265,6 +262,7 @@ CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
 CONFIG_ATA=y
 CONFIG_ATA_PIIX=y
+CONFIG_PATA_LEGACY=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig
index d41742dd2..98f13879b 100644
--- a/arch/mips/configs/malta_kvm_defconfig
+++ b/arch/mips/configs/malta_kvm_defconfig
@@ -248,17 +248,12 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_IT8213=m
 CONFIG_BLK_DEV_TC86C001=m
 CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_MULTI_LUN=y
@@ -274,6 +269,13 @@ CONFIG_SCSI_AACRAID=m
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
diff --git a/arch/mips/configs/malta_kvm_guest_defconfig b/arch/mips/configs/malta_kvm_guest_defconfig
index a7806e83e..3b5d5913f 100644
--- a/arch/mips/configs/malta_kvm_guest_defconfig
+++ b/arch/mips/configs/malta_kvm_guest_defconfig
@@ -248,17 +248,12 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_VIRTIO_BLK=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_IT8213=m
 CONFIG_BLK_DEV_TC86C001=m
 CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_MULTI_LUN=y
@@ -274,6 +269,13 @@ CONFIG_SCSI_AACRAID=m
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
diff --git a/arch/mips/configs/malta_qemu_32r6_defconfig b/arch/mips/configs/malta_qemu_32r6_defconfig
index 4bce1f8eb..7f50dd67a 100644
--- a/arch/mips/configs/malta_qemu_32r6_defconfig
+++ b/arch/mips/configs/malta_qemu_32r6_defconfig
@@ -80,15 +80,14 @@ CONFIG_NET_CLS_IND=y
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_ADAPTEC is not set
diff --git a/arch/mips/configs/maltaaprp_defconfig b/arch/mips/configs/maltaaprp_defconfig
index fb042ce86..a9d433a17 100644
--- a/arch/mips/configs/maltaaprp_defconfig
+++ b/arch/mips/configs/maltaaprp_defconfig
@@ -81,15 +81,14 @@ CONFIG_NET_CLS_IND=y
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_ADAPTEC is not set
diff --git a/arch/mips/configs/maltasmvp_eva_defconfig b/arch/mips/configs/maltasmvp_eva_defconfig
index c83338a39..2774ef064 100644
--- a/arch/mips/configs/maltasmvp_eva_defconfig
+++ b/arch/mips/configs/maltasmvp_eva_defconfig
@@ -85,15 +85,14 @@ CONFIG_NET_CLS_IND=y
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_ADAPTEC is not set
diff --git a/arch/mips/configs/maltaup_defconfig b/arch/mips/configs/maltaup_defconfig
index 62344648e..9bbd2218f 100644
--- a/arch/mips/configs/maltaup_defconfig
+++ b/arch/mips/configs/maltaup_defconfig
@@ -80,15 +80,14 @@ CONFIG_NET_CLS_IND=y
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_ADAPTEC is not set
diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig
index c388bff09..732215732 100644
--- a/arch/mips/configs/maltaup_xpa_defconfig
+++ b/arch/mips/configs/maltaup_xpa_defconfig
@@ -244,17 +244,12 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_IT8213=m
 CONFIG_BLK_DEV_TC86C001=m
 CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
@@ -269,6 +264,13 @@ CONFIG_SCSI_AACRAID=m
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 7a346605c..a2c045fab 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -27,9 +27,9 @@ CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_NETWORK_SECMARK=y
 CONFIG_CONNECTOR=m
 CONFIG_ATA_OVER_ETH=m
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_LEGACY=y
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig
index 642b50946..8b7429127 100644
--- a/arch/mips/configs/pistachio_defconfig
+++ b/arch/mips/configs/pistachio_defconfig
@@ -257,7 +257,6 @@ CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_TEST=m
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
diff --git a/arch/mips/configs/xilfpga_defconfig b/arch/mips/configs/xilfpga_defconfig
new file mode 100644
index 000000000..ed1dce348
--- /dev/null
+++ b/arch/mips/configs/xilfpga_defconfig
@@ -0,0 +1,40 @@
+CONFIG_MACH_XILFPGA=y
+# CONFIG_COMPACTION is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_BLOCK is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_UEVENT_HELPER is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_XILINX=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_PANIC_ON_OOPS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,115200"
diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h
index 37f84078e..940760844 100644
--- a/arch/mips/include/asm/abi.h
+++ b/arch/mips/include/asm/abi.h
@@ -11,19 +11,20 @@
 
 #include <asm/signal.h>
 #include <asm/siginfo.h>
+#include <asm/vdso.h>
 
 struct mips_abi {
 	int (* const setup_frame)(void *sig_return, struct ksignal *ksig,
 				  struct pt_regs *regs, sigset_t *set);
-	const unsigned long	signal_return_offset;
 	int (* const setup_rt_frame)(void *sig_return, struct ksignal *ksig,
 				     struct pt_regs *regs, sigset_t *set);
-	const unsigned long	rt_signal_return_offset;
 	const unsigned long	restart;
 
 	unsigned	off_sc_fpregs;
 	unsigned	off_sc_fpc_csr;
 	unsigned	off_sc_used_math;
+
+	struct mips_vdso_image *vdso;
 };
 
 #endif /* _ASM_ABI_H */
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 4c42fd9af..835b402e4 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -30,7 +30,7 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)		ACCESS_ONCE((v)->counter)
+#define atomic_read(v)		READ_ONCE((v)->counter)
 
 /*
  * atomic_set - set atomic variable
@@ -39,7 +39,7 @@
  *
  * Atomically sets the value of @v to @i.
  */
-#define atomic_set(v, i)		((v)->counter = (i))
+#define atomic_set(v, i)	WRITE_ONCE((v)->counter, (i))
 
 #define ATOMIC_OP(op, c_op, asm_op)					      \
 static __inline__ void atomic_##op(int i, atomic_t * v)			      \
@@ -315,14 +315,14 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
  * @v: pointer of type atomic64_t
  *
  */
-#define atomic64_read(v)	ACCESS_ONCE((v)->counter)
+#define atomic64_read(v)	READ_ONCE((v)->counter)
 
 /*
  * atomic64_set - set atomic variable
  * @v: pointer of type atomic64_t
  * @i: required value
  */
-#define atomic64_set(v, i)	((v)->counter = (i))
+#define atomic64_set(v, i)	WRITE_ONCE((v)->counter, (i))
 
 #define ATOMIC64_OP(op, c_op, asm_op)					      \
 static __inline__ void atomic64_##op(long i, atomic64_t * v)		      \
@@ -507,7 +507,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
  * @u: ...unless v is equal to u.
  *
  * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
+ * Returns true iff @v was not @u.
  */
 static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 {
diff --git a/arch/mips/include/asm/bcache.h b/arch/mips/include/asm/bcache.h
index 8c34484ce..a00857b13 100644
--- a/arch/mips/include/asm/bcache.h
+++ b/arch/mips/include/asm/bcache.h
@@ -9,6 +9,7 @@
 #ifndef _ASM_BCACHE_H
 #define _ASM_BCACHE_H
 
+#include <linux/types.h>
 
 /* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent,
    chipset implemented caches.	On machines with other CPUs the CPU does the
@@ -18,6 +19,9 @@ struct bcache_ops {
 	void (*bc_disable)(void);
 	void (*bc_wback_inv)(unsigned long page, unsigned long size);
 	void (*bc_inv)(unsigned long page, unsigned long size);
+	void (*bc_prefetch_enable)(void);
+	void (*bc_prefetch_disable)(void);
+	bool (*bc_prefetch_is_enabled)(void);
 };
 
 extern void indy_sc_init(void);
@@ -46,6 +50,26 @@ static inline void bc_inv(unsigned long page, unsigned long size)
 	bcops->bc_inv(page, size);
 }
 
+static inline void bc_prefetch_enable(void)
+{
+	if (bcops->bc_prefetch_enable)
+		bcops->bc_prefetch_enable();
+}
+
+static inline void bc_prefetch_disable(void)
+{
+	if (bcops->bc_prefetch_disable)
+		bcops->bc_prefetch_disable();
+}
+
+static inline bool bc_prefetch_is_enabled(void)
+{
+	if (bcops->bc_prefetch_is_enabled)
+		return bcops->bc_prefetch_is_enabled();
+
+	return false;
+}
+
 #else /* !defined(CONFIG_BOARD_SCACHE) */
 
 /* Not R4000 / R4400 / R4600 / R5000.  */
@@ -54,6 +78,9 @@ static inline void bc_inv(unsigned long page, unsigned long size)
 #define bc_disable() do { } while (0)
 #define bc_wback_inv(page, size) do { } while (0)
 #define bc_inv(page, size) do { } while (0)
+#define bc_prefetch_enable() do { } while (0)
+#define bc_prefetch_disable() do { } while (0)
+#define bc_prefetch_is_enabled() 0
 
 #endif /* !defined(CONFIG_BOARD_SCACHE) */
 
diff --git a/arch/mips/include/asm/clocksource.h b/arch/mips/include/asm/clocksource.h
new file mode 100644
index 000000000..3deb1d0c1
--- /dev/null
+++ b/arch/mips/include/asm/clocksource.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_CLOCKSOURCE_H
+#define __ASM_CLOCKSOURCE_H
+
+#include <linux/types.h>
+
+/* VDSO clocksources. */
+#define VDSO_CLOCK_NONE		0	/* No suitable clocksource. */
+#define VDSO_CLOCK_R4K		1	/* Use the coprocessor 0 count. */
+#define VDSO_CLOCK_GIC		2	/* Use the GIC. */
+
+/**
+ * struct arch_clocksource_data - Architecture-specific clocksource information.
+ * @vdso_clock_mode: Method the VDSO should use to access the clocksource.
+ */
+struct arch_clocksource_data {
+	u8 vdso_clock_mode;
+};
+
+#endif /* __ASM_CLOCKSOURCE_H */
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index c4bd54a7f..a9580097c 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -130,6 +130,8 @@ typedef union compat_sigval {
 	compat_uptr_t	sival_ptr;
 } compat_sigval_t;
 
+/* Can't use the generic version because si_code and si_errno are swapped */
+
 #define SI_PAD_SIZE32	(128/sizeof(int) - 3)
 
 typedef struct compat_siginfo {
@@ -138,57 +140,61 @@ typedef struct compat_siginfo {
 	int si_errno;
 
 	union {
-		int _pad[SI_PAD_SIZE32];
+		int _pad[128 / sizeof(int) - 3];
 
 		/* kill() */
 		struct {
 			compat_pid_t _pid;	/* sender's pid */
-			__compat_uid_t _uid;	/* sender's uid */
+			__compat_uid32_t _uid;	/* sender's uid */
 		} _kill;
 
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;	/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			__compat_uid32_t _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
 		/* SIGCHLD */
 		struct {
 			compat_pid_t _pid;	/* which child */
-			__compat_uid_t _uid;	/* sender's uid */
+			__compat_uid32_t _uid;	/* sender's uid */
 			int _status;		/* exit code */
 			compat_clock_t _utime;
 			compat_clock_t _stime;
 		} _sigchld;
 
-		/* IRIX SIGCHLD */
-		struct {
-			compat_pid_t _pid;	/* which child */
-			compat_clock_t _utime;
-			int _status;		/* exit code */
-			compat_clock_t _stime;
-		} _irix_sigchld;
-
 		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
 		struct {
-			s32 _addr; /* faulting insn/memory ref. */
+			compat_uptr_t _addr;	/* faulting insn/memory ref. */
+#ifdef __ARCH_SI_TRAPNO
+			int _trapno;	/* TRAP # which caused the signal */
+#endif
+			short _addr_lsb; /* LSB of the reported address */
+			struct {
+				compat_uptr_t _lower;
+				compat_uptr_t _upper;
+			} _addr_bnd;
 		} _sigfault;
 
-		/* SIGPOLL, SIGXFSZ (To do ...)	 */
+		/* SIGPOLL */
 		struct {
-			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			compat_long_t _band; /* POLL_IN, POLL_OUT, POLL_MSG */
 			int _fd;
 		} _sigpoll;
 
-		/* POSIX.1b timers */
-		struct {
-			timer_t _tid;		/* timer id */
-			int _overrun;		/* overrun count */
-			compat_sigval_t _sigval;/* same as below */
-			int _sys_private;	/* not to be passed to user */
-		} _timer;
-
-		/* POSIX.1b signals */
 		struct {
-			compat_pid_t _pid;	/* sender's pid */
-			__compat_uid_t _uid;	/* sender's uid */
-			compat_sigval_t _sigval;
-		} _rt;
-
+			compat_uptr_t _call_addr; /* calling insn */
+			int _syscall;	/* triggering system call number */
+			compat_uint_t _arch;	/* AUDIT_ARCH_* of syscall */
+		} _sigsys;
 	} _sifields;
 } compat_siginfo_t;
 
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index fe67f12ac..d1e04c943 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -131,11 +131,7 @@
 #endif
 
 #ifndef cpu_has_rixi
-# ifdef CONFIG_64BIT
-# define cpu_has_rixi		(cpu_data[0].options & MIPS_CPU_RIXI)
-# else /* CONFIG_32BIT */
-# define cpu_has_rixi		((cpu_data[0].options & MIPS_CPU_RIXI) && !cpu_has_64bits)
-# endif
+#define cpu_has_rixi		(cpu_data[0].options & MIPS_CPU_RIXI)
 #endif
 
 #ifndef cpu_has_mmips
diff --git a/arch/mips/include/asm/debug.h b/arch/mips/include/asm/debug.h
new file mode 100644
index 000000000..254f00deb
--- /dev/null
+++ b/arch/mips/include/asm/debug.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_DEBUG_H__
+#define __MIPS_ASM_DEBUG_H__
+
+#include <linux/dcache.h>
+
+/*
+ * mips_debugfs_dir corresponds to the "mips" directory at the top level
+ * of the DebugFS hierarchy. MIPS-specific DebugFS entires should be
+ * placed beneath this directory.
+ */
+extern struct dentry *mips_debugfs_dir;
+
+#endif /* __MIPS_ASM_DEBUG_H__ */
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index 53b26933b..b01a6ff46 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -8,6 +8,7 @@
 #ifndef _ASM_ELF_H
 #define _ASM_ELF_H
 
+#include <linux/auxvec.h>
 #include <linux/fs.h>
 #include <uapi/linux/elf.h>
 
@@ -419,6 +420,12 @@ extern const char *__elf_platform;
 #define ELF_ET_DYN_BASE		(TASK_SIZE / 3 * 2)
 #endif
 
+#define ARCH_DLINFO							\
+do {									\
+	NEW_AUX_ENT(AT_SYSINFO_EHDR,					\
+		    (unsigned long)current->mm->context.vdso);		\
+} while (0)
+
 #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
 struct linux_binprm;
 extern int arch_setup_additional_pages(struct linux_binprm *bprm,
diff --git a/arch/mips/include/asm/fw/fw.h b/arch/mips/include/asm/fw/fw.h
index f3e6978aa..d0ef8b489 100644
--- a/arch/mips/include/asm/fw/fw.h
+++ b/arch/mips/include/asm/fw/fw.h
@@ -10,21 +10,6 @@
 
 #include <asm/bootinfo.h>	/* For cleaner code... */
 
-enum fw_memtypes {
-	fw_dontuse,
-	fw_code,
-	fw_free,
-};
-
-typedef struct {
-	unsigned long base;	/* Within KSEG0 */
-	unsigned int size;	/* bytes */
-	enum fw_memtypes type;	/* fw_memtypes */
-} fw_memblock_t;
-
-/* Maximum number of memory block descriptors. */
-#define FW_MAX_MEMBLOCKS	32
-
 extern int fw_argc;
 extern int *_fw_argv;
 extern int *_fw_envp;
@@ -38,7 +23,6 @@ extern int *_fw_envp;
 
 extern void fw_init_cmdline(void);
 extern char *fw_getcmdline(void);
-extern fw_memblock_t *fw_getmdesc(int);
 extern void fw_meminit(void);
 extern char *fw_getenv(char *name);
 extern unsigned long fw_getenvl(char *name);
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
index 572e63ec2..01880b34a 100644
--- a/arch/mips/include/asm/highmem.h
+++ b/arch/mips/include/asm/highmem.h
@@ -49,7 +49,6 @@ extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
-extern struct page *kmap_atomic_to_page(void *ptr);
 
 #define flush_cache_kmaps()	flush_cache_all()
 
diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h
index 5a1a882e0..6ded8d347 100644
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -847,5 +847,7 @@ static inline void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
 		struct kvm_memory_slot *slot) {}
 static inline void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
+static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) {}
+static inline void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu) {}
 
 #endif /* __MIPS_KVM_HOST_H__ */
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
index 1461c10c1..71e4096a2 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -48,11 +48,6 @@ extern enum bcm47xx_bus_type bcm47xx_bus_type;
 void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
 			bool fallback);
 
-#ifdef CONFIG_BCM47XX_SSB
-void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
-				const char *prefix);
-#endif
-
 void bcm47xx_set_system_type(u16 chip_id);
 
 #endif /* __ASM_BCM47XX_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
index 25737655d..dd2995488 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
@@ -7,48 +7,4 @@
 
 int __init bcm63xx_spi_register(void);
 
-struct bcm63xx_spi_pdata {
-	unsigned int	fifo_size;
-	unsigned int	msg_type_shift;
-	unsigned int	msg_ctl_width;
-	int		bus_num;
-	int		num_chipselect;
-};
-
-enum bcm63xx_regs_spi {
-	SPI_CMD,
-	SPI_INT_STATUS,
-	SPI_INT_MASK_ST,
-	SPI_INT_MASK,
-	SPI_ST,
-	SPI_CLK_CFG,
-	SPI_FILL_BYTE,
-	SPI_MSG_TAIL,
-	SPI_RX_TAIL,
-	SPI_MSG_CTL,
-	SPI_MSG_DATA,
-	SPI_RX_DATA,
-};
-
-#define __GEN_SPI_REGS_TABLE(__cpu)					\
-	[SPI_CMD]		= SPI_## __cpu ##_CMD,			\
-	[SPI_INT_STATUS]	= SPI_## __cpu ##_INT_STATUS,		\
-	[SPI_INT_MASK_ST]	= SPI_## __cpu ##_INT_MASK_ST,		\
-	[SPI_INT_MASK]		= SPI_## __cpu ##_INT_MASK,		\
-	[SPI_ST]		= SPI_## __cpu ##_ST,			\
-	[SPI_CLK_CFG]		= SPI_## __cpu ##_CLK_CFG,		\
-	[SPI_FILL_BYTE]		= SPI_## __cpu ##_FILL_BYTE,		\
-	[SPI_MSG_TAIL]		= SPI_## __cpu ##_MSG_TAIL,		\
-	[SPI_RX_TAIL]		= SPI_## __cpu ##_RX_TAIL,		\
-	[SPI_MSG_CTL]		= SPI_## __cpu ##_MSG_CTL,		\
-	[SPI_MSG_DATA]		= SPI_## __cpu ##_MSG_DATA,		\
-	[SPI_RX_DATA]		= SPI_## __cpu ##_RX_DATA,
-
-static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
-{
-	extern const unsigned long *bcm63xx_regs_spi;
-
-	return bcm63xx_regs_spi[reg];
-}
-
 #endif /* BCM63XX_DEV_SPI_H */
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
index 133336b49..dd6005b75 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -35,6 +35,17 @@
 #define SOC_ID_VRX268_2		0x00C /* v1.2 */
 #define SOC_ID_GRX288_2		0x00D /* v1.2 */
 #define SOC_ID_GRX282_2		0x00E /* v1.2 */
+#define SOC_ID_VRX220		0x000
+
+#define SOC_ID_ARX362		0x004
+#define SOC_ID_ARX368		0x005
+#define SOC_ID_ARX382		0x007
+#define SOC_ID_ARX388		0x008
+#define SOC_ID_URX388		0x009
+#define SOC_ID_GRX383		0x010
+#define SOC_ID_GRX369		0x011
+#define SOC_ID_GRX387		0x00F
+#define SOC_ID_GRX389		0x012
 
  /* SoC Types */
 #define SOC_TYPE_DANUBE		0x01
@@ -43,6 +54,9 @@
 #define SOC_TYPE_VR9		0x04 /* v1.1 */
 #define SOC_TYPE_VR9_2		0x05 /* v1.2 */
 #define SOC_TYPE_AMAZON_SE	0x06
+#define SOC_TYPE_AR10		0x07
+#define SOC_TYPE_GRX390		0x08
+#define SOC_TYPE_VRX220		0x09
 
 /* BOOT_SEL - find what boot media we have */
 #define BS_EXT_ROM		0x0
diff --git a/arch/mips/include/asm/mach-malta/malta-dtshim.h b/arch/mips/include/asm/mach-malta/malta-dtshim.h
new file mode 100644
index 000000000..cfd777663
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/malta-dtshim.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_MALTA_DTSHIM_H__
+#define __MIPS_MALTA_DTSHIM_H__
+
+#include <linux/init.h>
+
+#ifdef CONFIG_MIPS_MALTA
+
+extern void __init *malta_dt_shim(void *fdt);
+
+#else /* !CONFIG_MIPS_MALTA */
+
+static inline void *malta_dt_shim(void *fdt)
+{
+	return fdt;
+}
+
+#endif /* !CONFIG_MIPS_MALTA */
+
+#endif /* __MIPS_MALTA_DTSHIM_H__ */
diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
index 1976fb815..455d406e8 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -13,17 +13,11 @@
 #ifndef _MT7620_REGS_H_
 #define _MT7620_REGS_H_
 
-enum mt762x_soc_type {
-	MT762X_SOC_UNKNOWN = 0,
-	MT762X_SOC_MT7620A,
-	MT762X_SOC_MT7620N,
-	MT762X_SOC_MT7628AN,
-};
-
 #define MT7620_SYSC_BASE		0x10000000
 
 #define SYSC_REG_CHIP_NAME0		0x00
 #define SYSC_REG_CHIP_NAME1		0x04
+#define SYSC_REG_EFUSE_CFG		0x08
 #define SYSC_REG_CHIP_REV		0x0c
 #define SYSC_REG_SYSTEM_CONFIG0		0x10
 #define SYSC_REG_SYSTEM_CONFIG1		0x14
diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
index bd9301449..4c9fba68c 100644
--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
@@ -13,6 +13,23 @@
 #ifndef _RALINK_REGS_H_
 #define _RALINK_REGS_H_
 
+enum ralink_soc_type {
+	RALINK_UNKNOWN = 0,
+	RT2880_SOC,
+	RT3883_SOC,
+	RT305X_SOC_RT3050,
+	RT305X_SOC_RT3052,
+	RT305X_SOC_RT3350,
+	RT305X_SOC_RT3352,
+	RT305X_SOC_RT5350,
+	MT762X_SOC_MT7620A,
+	MT762X_SOC_MT7620N,
+	MT762X_SOC_MT7621AT,
+	MT762X_SOC_MT7628AN,
+	MT762X_SOC_MT7688,
+};
+extern enum ralink_soc_type ralink_soc;
+
 extern __iomem void *rt_sysc_membase;
 extern __iomem void *rt_memc_membase;
 
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
index 96f731bac..2eea79331 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -13,25 +13,16 @@
 #ifndef _RT305X_REGS_H_
 #define _RT305X_REGS_H_
 
-enum rt305x_soc_type {
-	RT305X_SOC_UNKNOWN = 0,
-	RT305X_SOC_RT3050,
-	RT305X_SOC_RT3052,
-	RT305X_SOC_RT3350,
-	RT305X_SOC_RT3352,
-	RT305X_SOC_RT5350,
-};
-
-extern enum rt305x_soc_type rt305x_soc;
+extern enum ralink_soc_type ralink_soc;
 
 static inline int soc_is_rt3050(void)
 {
-	return rt305x_soc == RT305X_SOC_RT3050;
+	return ralink_soc == RT305X_SOC_RT3050;
 }
 
 static inline int soc_is_rt3052(void)
 {
-	return rt305x_soc == RT305X_SOC_RT3052;
+	return ralink_soc == RT305X_SOC_RT3052;
 }
 
 static inline int soc_is_rt305x(void)
@@ -41,17 +32,17 @@ static inline int soc_is_rt305x(void)
 
 static inline int soc_is_rt3350(void)
 {
-	return rt305x_soc == RT305X_SOC_RT3350;
+	return ralink_soc == RT305X_SOC_RT3350;
 }
 
 static inline int soc_is_rt3352(void)
 {
-	return rt305x_soc == RT305X_SOC_RT3352;
+	return ralink_soc == RT305X_SOC_RT3352;
 }
 
 static inline int soc_is_rt5350(void)
 {
-	return rt305x_soc == RT305X_SOC_RT5350;
+	return ralink_soc == RT305X_SOC_RT5350;
 }
 
 #define RT305X_SYSC_BASE		0x10000000
diff --git a/arch/mips/include/asm/mach-xilfpga/irq.h b/arch/mips/include/asm/mach-xilfpga/irq.h
new file mode 100644
index 000000000..0132a5b91
--- /dev/null
+++ b/arch/mips/include/asm/mach-xilfpga/irq.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_MACH_XILFPGA_IRQ_H__
+#define __MIPS_ASM_MACH_XILFPGA_IRQ_H__
+
+#define NR_IRQS 32
+
+#include_next <irq.h>
+
+#endif /* __MIPS_ASM_MACH_XILFPGA_IRQ_H__ */
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 1f1927ab4..6516e9da5 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -11,6 +11,7 @@
 #ifndef __MIPS_ASM_MIPS_CM_H__
 #define __MIPS_ASM_MIPS_CM_H__
 
+#include <linux/bitops.h>
 #include <linux/errno.h>
 #include <linux/io.h>
 #include <linux/types.h>
@@ -36,12 +37,12 @@ extern phys_addr_t __mips_cm_phys_base(void);
 /*
  * mips_cm_is64 - determine CM register width
  *
- * The CM register width is processor and CM specific. A 64-bit processor
- * usually has a 64-bit CM and a 32-bit one has a 32-bit CM but a 64-bit
- * processor could come with a 32-bit CM. Moreover, accesses on 64-bit CMs
- * can be done either using regular 64-bit load/store instructions, or 32-bit
- * load/store instruction on 32-bit register pairs. We opt for using 64-bit
- * accesses on 64-bit CMs and kernels and 32-bit in any other case.
+ * The CM register width is determined by the version of the CM, with CM3
+ * introducing 64 bit GCRs and all prior CM versions having 32 bit GCRs.
+ * However we may run a kernel built for MIPS32 on a system with 64 bit GCRs,
+ * or vice-versa. This variable indicates the width of the memory accesses
+ * that the kernel will perform to GCRs, which may differ from the actual
+ * width of the GCRs.
  *
  * It's set to 0 for 32-bit accesses and 1 for 64-bit accesses.
  */
@@ -125,7 +126,17 @@ static inline u32 read32_gcr_##name(void)			\
 								\
 static inline u64 read64_gcr_##name(void)			\
 {								\
-	return __raw_readq(addr_gcr_##name());			\
+	void __iomem *addr = addr_gcr_##name();			\
+	u64 ret;						\
+								\
+	if (mips_cm_is64) {					\
+		ret = __raw_readq(addr);			\
+	} else {						\
+		ret = __raw_readl(addr);			\
+		ret |= (u64)__raw_readl(addr + 0x4) << 32;	\
+	}							\
+								\
+	return ret;						\
 }								\
 								\
 static inline unsigned long read_gcr_##name(void)		\
@@ -195,6 +206,8 @@ BUILD_CM_R_(gic_status,		MIPS_CM_GCB_OFS + 0xd0)
 BUILD_CM_R_(cpc_status,		MIPS_CM_GCB_OFS + 0xf0)
 BUILD_CM_RW(l2_config,		MIPS_CM_GCB_OFS + 0x130)
 BUILD_CM_RW(sys_config2,	MIPS_CM_GCB_OFS + 0x150)
+BUILD_CM_RW(l2_pft_control,	MIPS_CM_GCB_OFS + 0x300)
+BUILD_CM_RW(l2_pft_control_b,	MIPS_CM_GCB_OFS + 0x308)
 
 /* Core Local & Core Other register accessor functions */
 BUILD_CM_Cx_RW(reset_release,	0x00)
@@ -245,11 +258,14 @@ BUILD_CM_Cx_R_(tcid_8_priority,	0x80)
 		 ((minor) << CM_GCR_REV_MINOR_SHF))
 
 #define CM_REV_CM2				CM_ENCODE_REV(6, 0)
+#define CM_REV_CM2_5				CM_ENCODE_REV(7, 0)
 #define CM_REV_CM3				CM_ENCODE_REV(8, 0)
 
 /* GCR_ERROR_CAUSE register fields */
 #define CM_GCR_ERROR_CAUSE_ERRTYPE_SHF		27
 #define CM_GCR_ERROR_CAUSE_ERRTYPE_MSK		(_ULCAST_(0x1f) << 27)
+#define CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF		58
+#define CM3_GCR_ERROR_CAUSE_ERRTYPE_MSK		GENMASK_ULL(63, 58)
 #define CM_GCR_ERROR_CAUSE_ERRINFO_SHF		0
 #define CM_GCR_ERROR_CAUSE_ERRINGO_MSK		(_ULCAST_(0x7ffffff) << 0)
 
@@ -321,6 +337,20 @@ BUILD_CM_Cx_R_(tcid_8_priority,	0x80)
 #define CM_GCR_SYS_CONFIG2_MAXVPW_SHF		0
 #define CM_GCR_SYS_CONFIG2_MAXVPW_MSK		(_ULCAST_(0xf) << 0)
 
+/* GCR_L2_PFT_CONTROL register fields */
+#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_SHF	12
+#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK	(_ULCAST_(0xfffff) << 12)
+#define CM_GCR_L2_PFT_CONTROL_PFTEN_SHF		8
+#define CM_GCR_L2_PFT_CONTROL_PFTEN_MSK		(_ULCAST_(0x1) << 8)
+#define CM_GCR_L2_PFT_CONTROL_NPFT_SHF		0
+#define CM_GCR_L2_PFT_CONTROL_NPFT_MSK		(_ULCAST_(0xff) << 0)
+
+/* GCR_L2_PFT_CONTROL_B register fields */
+#define CM_GCR_L2_PFT_CONTROL_B_CEN_SHF		8
+#define CM_GCR_L2_PFT_CONTROL_B_CEN_MSK		(_ULCAST_(0x1) << 8)
+#define CM_GCR_L2_PFT_CONTROL_B_PORTID_SHF	0
+#define CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK	(_ULCAST_(0xff) << 0)
+
 /* GCR_Cx_COHERENCE register fields */
 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF	0
 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK	(_ULCAST_(0xff) << 0)
@@ -329,11 +359,15 @@ BUILD_CM_Cx_R_(tcid_8_priority,	0x80)
 #define CM_GCR_Cx_CONFIG_IOCUTYPE_SHF		10
 #define CM_GCR_Cx_CONFIG_IOCUTYPE_MSK		(_ULCAST_(0x3) << 10)
 #define CM_GCR_Cx_CONFIG_PVPE_SHF		0
-#define CM_GCR_Cx_CONFIG_PVPE_MSK		(_ULCAST_(0x1ff) << 0)
+#define CM_GCR_Cx_CONFIG_PVPE_MSK		(_ULCAST_(0x3ff) << 0)
 
 /* GCR_Cx_OTHER register fields */
 #define CM_GCR_Cx_OTHER_CORENUM_SHF		16
 #define CM_GCR_Cx_OTHER_CORENUM_MSK		(_ULCAST_(0xffff) << 16)
+#define CM3_GCR_Cx_OTHER_CORE_SHF		8
+#define CM3_GCR_Cx_OTHER_CORE_MSK		(_ULCAST_(0x3f) << 8)
+#define CM3_GCR_Cx_OTHER_VP_SHF			0
+#define CM3_GCR_Cx_OTHER_VP_MSK			(_ULCAST_(0x7) << 0)
 
 /* GCR_Cx_RESET_BASE register fields */
 #define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_SHF	12
@@ -444,4 +478,32 @@ static inline unsigned int mips_cm_vp_id(unsigned int cpu)
 	return (core * mips_cm_max_vp_width()) + vp;
 }
 
+#ifdef CONFIG_MIPS_CM
+
+/**
+ * mips_cm_lock_other - lock access to another core
+ * @core: the other core to be accessed
+ * @vp: the VP within the other core to be accessed
+ *
+ * Call before operating upon a core via the 'other' register region in
+ * order to prevent the region being moved during access. Must be followed
+ * by a call to mips_cm_unlock_other.
+ */
+extern void mips_cm_lock_other(unsigned int core, unsigned int vp);
+
+/**
+ * mips_cm_unlock_other - unlock access to another core
+ *
+ * Call after operating upon another core via the 'other' register region.
+ * Must be called after mips_cm_lock_other.
+ */
+extern void mips_cm_unlock_other(void);
+
+#else /* !CONFIG_MIPS_CM */
+
+static inline void mips_cm_lock_other(unsigned int core) { }
+static inline void mips_cm_unlock_other(void) { }
+
+#endif /* !CONFIG_MIPS_CM */
+
 #endif /* __MIPS_ASM_MIPS_CM_H__ */
diff --git a/arch/mips/include/asm/mips-cpc.h b/arch/mips/include/asm/mips-cpc.h
index f386f3270..e09035239 100644
--- a/arch/mips/include/asm/mips-cpc.h
+++ b/arch/mips/include/asm/mips-cpc.h
@@ -149,7 +149,8 @@ BUILD_CPC_Cx_RW(other,		0x10)
  * core: the other core to be accessed
  *
  * Call before operating upon a core via the 'other' register region in
- * order to prevent the region being moved during access. Must be followed
+ * order to prevent the region being moved during access. Must be called
+ * within the bounds of a mips_cm_{lock,unlock}_other pair, and followed
  * by a call to mips_cpc_unlock_other.
  */
 extern void mips_cpc_lock_other(unsigned int core);
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index c64781cf6..e43aca183 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -50,7 +50,9 @@
 #define CP0_PAGEMASK $5
 #define CP0_WIRED $6
 #define CP0_INFO $7
+#define CP0_HWRENA $7, 0
 #define CP0_BADVADDR $8
+#define CP0_BADINSTR $8, 1
 #define CP0_COUNT $9
 #define CP0_ENTRYHI $10
 #define CP0_COMPARE $11
@@ -58,7 +60,11 @@
 #define CP0_CAUSE $13
 #define CP0_EPC $14
 #define CP0_PRID $15
+#define CP0_EBASE $15, 1
+#define CP0_CMGCRBASE $15, 3
 #define CP0_CONFIG $16
+#define CP0_CONFIG3 $16, 3
+#define CP0_CONFIG5 $16, 5
 #define CP0_LLADDR $17
 #define CP0_WATCHLO $18
 #define CP0_WATCHHI $19
@@ -126,15 +132,9 @@
 #define R3K_ENTRYLO_N		(_ULCAST_(1) << 11)
 
 /* MIPS32/64 EntryLo bit definitions */
-#ifdef CONFIG_64BIT
-/* as read by dmfc0 */
-#define MIPS_ENTRYLO_XI		(_ULCAST_(1) << 62)
-#define MIPS_ENTRYLO_RI		(_ULCAST_(1) << 63)
-#else
-/* as read by mfc0 */
-#define MIPS_ENTRYLO_XI		(_ULCAST_(1) << 30)
-#define MIPS_ENTRYLO_RI		(_ULCAST_(1) << 31)
-#endif
+#define MIPS_ENTRYLO_PFN_SHIFT	6
+#define MIPS_ENTRYLO_XI		(_ULCAST_(1) << (BITS_PER_LONG - 2))
+#define MIPS_ENTRYLO_RI		(_ULCAST_(1) << (BITS_PER_LONG - 1))
 
 /*
  * Values for PageMask register
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 89dd7fed1..2046c0230 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -33,7 +33,7 @@
 #define PAGE_SHIFT	16
 #endif
 #define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~((1 << PAGE_SHIFT) - 1))
+#define PAGE_MASK	(~(PAGE_SIZE - 1))
 
 /*
  * This is used for calculating the real page sizes
@@ -200,8 +200,9 @@ static inline int pfn_valid(unsigned long pfn)
 {
 	/* avoid <linux/mm.h> include hell */
 	extern unsigned long max_mapnr;
+	unsigned long pfn_offset = ARCH_PFN_OFFSET;
 
-	return pfn >= ARCH_PFN_OFFSET && pfn < max_mapnr;
+	return pfn >= pfn_offset && pfn < max_mapnr;
 }
 
 #elif defined(CONFIG_SPARSEMEM)
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 59ee6dcf6..3f832c3dd 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -36,12 +36,6 @@ extern unsigned int vced_count, vcei_count;
  */
 #define HAVE_ARCH_PICK_MMAP_LAYOUT 1
 
-/*
- * A special page (the vdso) is mapped into all processes at the very
- * top of the virtual memory space.
- */
-#define SPECIAL_PAGES_SIZE PAGE_SIZE
-
 #ifdef CONFIG_32BIT
 #ifdef CONFIG_KVM_GUEST
 /* User space process size is limited to 1GB in KVM Guest Mode */
@@ -80,7 +74,7 @@ extern unsigned int vced_count, vcei_count;
 
 #endif
 
-#define STACK_TOP	((TASK_SIZE & PAGE_MASK) - SPECIAL_PAGES_SIZE)
+#define STACK_TOP	(TASK_SIZE & PAGE_MASK)
 
 /*
  * This decides where the kernel will search for a free chunk of vm
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 5305d694f..095ecafe6 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -599,7 +599,7 @@ extern void __put_user_unknown(void);
  * On error, the variable @x is set to zero.
  */
 #define __get_user_unaligned(x,ptr) \
-	__get_user__unalignednocheck((x),(ptr),sizeof(*(ptr)))
+	__get_user_unaligned_nocheck((x),(ptr),sizeof(*(ptr)))
 
 /*
  * Yuck.  We need two variants, one for 64bit operation and one
@@ -620,8 +620,8 @@ extern void __get_user_unaligned_unknown(void);
 do {									\
 	switch (size) {							\
 	case 1: __get_data_asm(val, "lb", ptr); break;			\
-	case 2: __get_user_unaligned_asm(val, "ulh", ptr); break;	\
-	case 4: __get_user_unaligned_asm(val, "ulw", ptr); break;	\
+	case 2: __get_data_unaligned_asm(val, "ulh", ptr); break;	\
+	case 4: __get_data_unaligned_asm(val, "ulw", ptr); break;	\
 	case 8: __GET_USER_UNALIGNED_DW(val, ptr); break;		\
 	default: __get_user_unaligned_unknown(); break;			\
 	}								\
@@ -1122,9 +1122,15 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n);
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	might_fault();							\
-	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
-					   __cu_len);			\
+	if (eva_kernel_access()) {					\
+		__cu_len = __invoke_copy_from_kernel(__cu_to,		\
+						     __cu_from,		\
+						     __cu_len);		\
+	} else {							\
+		might_fault();						\
+		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
+						   __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -1229,16 +1235,28 @@ __clear_user(void __user *addr, __kernel_size_t size)
 {
 	__kernel_size_t res;
 
-	might_fault();
-	__asm__ __volatile__(
-		"move\t$4, %1\n\t"
-		"move\t$5, $0\n\t"
-		"move\t$6, %2\n\t"
-		__MODULE_JAL(__bzero)
-		"move\t%0, $6"
-		: "=r" (res)
-		: "r" (addr), "r" (size)
-		: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+	if (eva_kernel_access()) {
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, $0\n\t"
+			"move\t$6, %2\n\t"
+			__MODULE_JAL(__bzero_kernel)
+			"move\t%0, $6"
+			: "=r" (res)
+			: "r" (addr), "r" (size)
+			: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+	} else {
+		might_fault();
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, $0\n\t"
+			"move\t$6, %2\n\t"
+			__MODULE_JAL(__bzero)
+			"move\t%0, $6"
+			: "=r" (res)
+			: "r" (addr), "r" (size)
+			: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+	}
 
 	return res;
 }
@@ -1384,7 +1402,7 @@ static inline long strlen_user(const char __user *s)
 		might_fault();
 		__asm__ __volatile__(
 			"move\t$4, %1\n\t"
-			__MODULE_JAL(__strlen_kernel_asm)
+			__MODULE_JAL(__strlen_user_asm)
 			"move\t%0, $2"
 			: "=r" (res)
 			: "r" (s)
diff --git a/arch/mips/include/asm/vdso.h b/arch/mips/include/asm/vdso.h
index cca56aa40..8f4ca5dd9 100644
--- a/arch/mips/include/asm/vdso.h
+++ b/arch/mips/include/asm/vdso.h
@@ -1,29 +1,136 @@
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
  *
- * Copyright (C) 2009 Cavium Networks
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  */
 
 #ifndef __ASM_VDSO_H
 #define __ASM_VDSO_H
 
-#include <linux/types.h>
+#include <linux/mm_types.h>
 
+#include <asm/barrier.h>
 
-#ifdef CONFIG_32BIT
-struct mips_vdso {
-	u32 signal_trampoline[2];
-	u32 rt_signal_trampoline[2];
+/**
+ * struct mips_vdso_image - Details of a VDSO image.
+ * @data: Pointer to VDSO image data (page-aligned).
+ * @size: Size of the VDSO image data (page-aligned).
+ * @off_sigreturn: Offset of the sigreturn() trampoline.
+ * @off_rt_sigreturn: Offset of the rt_sigreturn() trampoline.
+ * @mapping: Special mapping structure.
+ *
+ * This structure contains details of a VDSO image, including the image data
+ * and offsets of certain symbols required by the kernel. It is generated as
+ * part of the VDSO build process, aside from the mapping page array, which is
+ * populated at runtime.
+ */
+struct mips_vdso_image {
+	void *data;
+	unsigned long size;
+
+	unsigned long off_sigreturn;
+	unsigned long off_rt_sigreturn;
+
+	struct vm_special_mapping mapping;
 };
-#else  /* !CONFIG_32BIT */
-struct mips_vdso {
-	u32 o32_signal_trampoline[2];
-	u32 o32_rt_signal_trampoline[2];
-	u32 rt_signal_trampoline[2];
-	u32 n32_rt_signal_trampoline[2];
+
+/*
+ * The following structures are auto-generated as part of the build for each
+ * ABI by genvdso, see arch/mips/vdso/Makefile.
+ */
+
+extern struct mips_vdso_image vdso_image;
+
+#ifdef CONFIG_MIPS32_O32
+extern struct mips_vdso_image vdso_image_o32;
+#endif
+
+#ifdef CONFIG_MIPS32_N32
+extern struct mips_vdso_image vdso_image_n32;
+#endif
+
+/**
+ * union mips_vdso_data - Data provided by the kernel for the VDSO.
+ * @xtime_sec:		Current real time (seconds part).
+ * @xtime_nsec:		Current real time (nanoseconds part, shifted).
+ * @wall_to_mono_sec:	Wall-to-monotonic offset (seconds part).
+ * @wall_to_mono_nsec:	Wall-to-monotonic offset (nanoseconds part).
+ * @seq_count:		Counter to synchronise updates (odd = updating).
+ * @cs_shift:		Clocksource shift value.
+ * @clock_mode:		Clocksource to use for time functions.
+ * @cs_mult:		Clocksource multiplier value.
+ * @cs_cycle_last:	Clock cycle value at last update.
+ * @cs_mask:		Clocksource mask value.
+ * @tz_minuteswest:	Minutes west of Greenwich (from timezone).
+ * @tz_dsttime:		Type of DST correction (from timezone).
+ *
+ * This structure contains data needed by functions within the VDSO. It is
+ * populated by the kernel and mapped read-only into user memory. The time
+ * fields are mirrors of internal data from the timekeeping infrastructure.
+ *
+ * Note: Care should be taken when modifying as the layout must remain the same
+ * for both 64- and 32-bit (for 32-bit userland on 64-bit kernel).
+ */
+union mips_vdso_data {
+	struct {
+		u64 xtime_sec;
+		u64 xtime_nsec;
+		u32 wall_to_mono_sec;
+		u32 wall_to_mono_nsec;
+		u32 seq_count;
+		u32 cs_shift;
+		u8 clock_mode;
+		u32 cs_mult;
+		u64 cs_cycle_last;
+		u64 cs_mask;
+		s32 tz_minuteswest;
+		s32 tz_dsttime;
+	};
+
+	u8 page[PAGE_SIZE];
 };
-#endif /* CONFIG_32BIT */
+
+static inline u32 vdso_data_read_begin(const union mips_vdso_data *data)
+{
+	u32 seq;
+
+	while (true) {
+		seq = ACCESS_ONCE(data->seq_count);
+		if (likely(!(seq & 1))) {
+			/* Paired with smp_wmb() in vdso_data_write_*(). */
+			smp_rmb();
+			return seq;
+		}
+
+		cpu_relax();
+	}
+}
+
+static inline bool vdso_data_read_retry(const union mips_vdso_data *data,
+					u32 start_seq)
+{
+	/* Paired with smp_wmb() in vdso_data_write_*(). */
+	smp_rmb();
+	return unlikely(data->seq_count != start_seq);
+}
+
+static inline void vdso_data_write_begin(union mips_vdso_data *data)
+{
+	++data->seq_count;
+
+	/* Ensure sequence update is written before other data page values. */
+	smp_wmb();
+}
+
+static inline void vdso_data_write_end(union mips_vdso_data *data)
+{
+	/* Ensure data values are written before updating sequence again. */
+	smp_wmb();
+	++data->seq_count;
+}
 
 #endif /* __ASM_VDSO_H */
diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild
index 96fe7395e..f2cf41461 100644
--- a/arch/mips/include/uapi/asm/Kbuild
+++ b/arch/mips/include/uapi/asm/Kbuild
@@ -1,9 +1,9 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
-generic-y += auxvec.h
 generic-y += ipcbuf.h
 
+header-y += auxvec.h
 header-y += bitfield.h
 header-y += bitsperlong.h
 header-y += break.h
diff --git a/arch/mips/include/uapi/asm/auxvec.h b/arch/mips/include/uapi/asm/auxvec.h
new file mode 100644
index 000000000..c9c719527
--- /dev/null
+++ b/arch/mips/include/uapi/asm/auxvec.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_AUXVEC_H
+#define __ASM_AUXVEC_H
+
+/* Location of VDSO image. */
+#define AT_SYSINFO_EHDR		33
+
+#endif /* __ASM_AUXVEC_H */
diff --git a/arch/mips/include/uapi/asm/mman.h b/arch/mips/include/uapi/asm/mman.h
index cfcb876ca..97c03f468 100644
--- a/arch/mips/include/uapi/asm/mman.h
+++ b/arch/mips/include/uapi/asm/mman.h
@@ -61,6 +61,12 @@
  */
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
+
+/*
+ * Flags for mlock
+ */
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
 
 #define MADV_NORMAL	0		/* no further special treatment */
 #define MADV_RANDOM	1		/* expect random page references */
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index cfabadb13..90f03a7da 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -379,16 +379,17 @@
 #define __NR_execveat			(__NR_Linux + 356)
 #define __NR_userfaultfd		(__NR_Linux + 357)
 #define __NR_membarrier			(__NR_Linux + 358)
+#define __NR_mlock2			(__NR_Linux + 359)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		358
+#define __NR_Linux_syscalls		359
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		358
+#define __NR_O32_Linux_syscalls		359
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -715,16 +716,17 @@
 #define __NR_execveat			(__NR_Linux + 316)
 #define __NR_userfaultfd		(__NR_Linux + 317)
 #define __NR_membarrier			(__NR_Linux + 318)
+#define __NR_mlock2			(__NR_Linux + 319)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		318
+#define __NR_Linux_syscalls		319
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		318
+#define __NR_64_Linux_syscalls		319
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -1055,15 +1057,16 @@
 #define __NR_execveat			(__NR_Linux + 320)
 #define __NR_userfaultfd		(__NR_Linux + 321)
 #define __NR_membarrier			(__NR_Linux + 322)
+#define __NR_mlock2			(__NR_Linux + 323)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		322
+#define __NR_Linux_syscalls		323
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		322
+#define __NR_N32_Linux_syscalls		323
 
 #endif /* _UAPI_ASM_UNISTD_H */
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 459cb0173..934b15b5b 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -25,6 +25,7 @@
 #include <linux/power_supply.h>
 #include <linux/power/jz4740-battery.h>
 #include <linux/power/gpio-charger.h>
+#include <linux/pwm.h>
 
 #include <asm/mach-jz4740/gpio.h>
 #include <asm/mach-jz4740/jz4740_fb.h>
@@ -34,8 +35,6 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 
-#include <linux/leds_pwm.h>
-
 #include <asm/mach-jz4740/platform.h>
 
 #include "clock.h"
@@ -399,13 +398,15 @@ static struct platform_device avt2_usb_regulator_device = {
 	}
 };
 
+static struct pwm_lookup qi_lb60_pwm_lookup[] = {
+	PWM_LOOKUP("jz4740-pwm", 4, "pwm-beeper", NULL, 0,
+		   PWM_POLARITY_NORMAL),
+};
+
 /* beeper */
 static struct platform_device qi_lb60_pwm_beeper = {
 	.name = "pwm-beeper",
 	.id = -1,
-	.dev = {
-		.platform_data = (void *)4,
-	},
 };
 
 /* charger */
@@ -491,6 +492,8 @@ static int __init qi_lb60_init_platform_devices(void)
 		platform_device_register(&jz4740_usb_ohci_device);
 	}
 
+	pwm_add_table(qi_lb60_pwm_lookup, ARRAY_SIZE(qi_lb60_pwm_lookup));
+
 	return platform_add_devices(jz_platform_devices,
 					ARRAY_SIZE(jz_platform_devices));
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d982be1ea..68e2b7db9 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
 obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
 obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
 obj-$(CONFIG_MIPS_CPS)		+= smp-cps.o cps-vec.o
+obj-$(CONFIG_MIPS_CPS_NS16550)	+= cps-vec-ns16550.o
 obj-$(CONFIG_MIPS_GIC_IPI)	+= smp-gic.o
 obj-$(CONFIG_MIPS_SPRAM)	+= spram.o
 
diff --git a/arch/mips/kernel/cps-vec-ns16550.S b/arch/mips/kernel/cps-vec-ns16550.S
new file mode 100644
index 000000000..6d246ad05
--- /dev/null
+++ b/arch/mips/kernel/cps-vec-ns16550.S
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <linux/serial_reg.h>
+
+#define UART_TX_OFS	(UART_TX << CONFIG_MIPS_CPS_NS16550_SHIFT)
+#define UART_LSR_OFS	(UART_LSR << CONFIG_MIPS_CPS_NS16550_SHIFT)
+
+/**
+ * _mips_cps_putc() - write a character to the UART
+ * @a0: ASCII character to write
+ * @t9: UART base address
+ */
+LEAF(_mips_cps_putc)
+1:	lw		t0, UART_LSR_OFS(t9)
+	andi		t0, t0, UART_LSR_TEMT
+	beqz		t0, 1b
+	sb		a0, UART_TX_OFS(t9)
+	jr		ra
+	END(_mips_cps_putc)
+
+/**
+ * _mips_cps_puts() - write a string to the UART
+ * @a0: pointer to NULL-terminated ASCII string
+ * @t9: UART base address
+ *
+ * Write a null-terminated ASCII string to the UART.
+ */
+NESTED(_mips_cps_puts, 0, ra)
+	move		s7, ra
+	move		s6, a0
+
+1:	lb		a0, 0(s6)
+	beqz		a0, 2f
+	jal		_mips_cps_putc
+	PTR_ADDIU	s6, s6, 1
+	b		1b
+
+2:	jr		s7
+	END(_mips_cps_puts)
+
+/**
+ * _mips_cps_putx4 - write a 4b hex value to the UART
+ * @a0: the 4b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a single hexadecimal character to the UART.
+ */
+NESTED(_mips_cps_putx4, 0, ra)
+	andi		a0, a0, 0xf
+	li		t0, '0'
+	blt		a0, 10, 1f
+	li		t0, 'a'
+	addiu		a0, a0, -10
+1:	addu		a0, a0, t0
+	b		_mips_cps_putc
+	END(_mips_cps_putx4)
+
+/**
+ * _mips_cps_putx8 - write an 8b hex value to the UART
+ * @a0: the 8b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write an 8 bit value (ie. 2 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx8, 0, ra)
+	move		s3, ra
+	move		s2, a0
+	srl		a0, a0, 4
+	jal		_mips_cps_putx4
+	move		a0, s2
+	move		ra, s3
+	b		_mips_cps_putx4
+	END(_mips_cps_putx8)
+
+/**
+ * _mips_cps_putx16 - write a 16b hex value to the UART
+ * @a0: the 16b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 16 bit value (ie. 4 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx16, 0, ra)
+	move		s5, ra
+	move		s4, a0
+	srl		a0, a0, 8
+	jal		_mips_cps_putx8
+	move		a0, s4
+	move		ra, s5
+	b		_mips_cps_putx8
+	END(_mips_cps_putx16)
+
+/**
+ * _mips_cps_putx32 - write a 32b hex value to the UART
+ * @a0: the 32b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 32 bit value (ie. 8 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx32, 0, ra)
+	move		s7, ra
+	move		s6, a0
+	srl		a0, a0, 16
+	jal		_mips_cps_putx16
+	move		a0, s6
+	move		ra, s7
+	b		_mips_cps_putx16
+	END(_mips_cps_putx32)
+
+#ifdef CONFIG_64BIT
+
+/**
+ * _mips_cps_putx64 - write a 64b hex value to the UART
+ * @a0: the 64b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 64 bit value (ie. 16 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx64, 0, ra)
+	move		sp, ra
+	move		s8, a0
+	dsrl32		a0, a0, 0
+	jal		_mips_cps_putx32
+	move		a0, s8
+	move		ra, sp
+	b		_mips_cps_putx32
+	END(_mips_cps_putx64)
+
+#define _mips_cps_putxlong _mips_cps_putx64
+
+#else /* !CONFIG_64BIT */
+
+#define _mips_cps_putxlong _mips_cps_putx32
+
+#endif /* !CONFIG_64BIT */
+
+/**
+ * mips_cps_bev_dump() - dump relevant exception state to UART
+ * @a0: pointer to NULL-terminated ASCII string naming the exception
+ *
+ * Write information that may be useful in debugging an exception to the
+ * UART configured by CONFIG_MIPS_CPS_NS16550_*. As this BEV exception
+ * will only be run if something goes horribly wrong very early during
+ * the bringup of a core and it is very likely to be unsafe to perform
+ * memory accesses at that point (cache state indeterminate, EVA may not
+ * be configured, coherence may be disabled) let alone have a stack,
+ * this is all written in assembly using only registers & unmapped
+ * uncached access to the UART registers.
+ */
+LEAF(mips_cps_bev_dump)
+	move		s0, ra
+	move		s1, a0
+
+	li		t9, CKSEG1ADDR(CONFIG_MIPS_CPS_NS16550_BASE)
+
+	PTR_LA		a0, str_newline
+	jal		_mips_cps_puts
+	PTR_LA		a0, str_bev
+	jal		_mips_cps_puts
+	move		a0, s1
+	jal		_mips_cps_puts
+	PTR_LA		a0, str_newline
+	jal		_mips_cps_puts
+	PTR_LA		a0, str_newline
+	jal		_mips_cps_puts
+
+#define DUMP_COP0_REG(reg, name, sz, _mfc0)		\
+	PTR_LA		a0, 8f;				\
+	jal		_mips_cps_puts;			\
+	_mfc0		a0, reg;			\
+	jal		_mips_cps_putx##sz;		\
+	PTR_LA		a0, str_newline;		\
+	jal		_mips_cps_puts;			\
+	TEXT(name)
+
+	DUMP_COP0_REG(CP0_CAUSE,    "Cause:    0x", 32, mfc0)
+	DUMP_COP0_REG(CP0_STATUS,   "Status:   0x", 32, mfc0)
+	DUMP_COP0_REG(CP0_EBASE,    "EBase:    0x", long, MFC0)
+	DUMP_COP0_REG(CP0_BADVADDR, "BadVAddr: 0x", long, MFC0)
+	DUMP_COP0_REG(CP0_BADINSTR, "BadInstr: 0x", 32, mfc0)
+
+	PTR_LA		a0, str_newline
+	jal		_mips_cps_puts
+	jr		s0
+	END(mips_cps_bev_dump)
+
+.pushsection	.data
+str_bev: .asciiz "BEV Exception: "
+str_newline: .asciiz "\r\n"
+.popsection
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index 209ded168..ac81edd44 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -25,14 +25,32 @@
 
 .set noreorder
 
+#ifdef CONFIG_64BIT
+# define STATUS_BITDEPS		ST0_KX
+#else
+# define STATUS_BITDEPS		0
+#endif
+
+#ifdef CONFIG_MIPS_CPS_NS16550
+
+#define DUMP_EXCEP(name)		\
+	PTR_LA	a0, 8f;			\
+	jal	mips_cps_bev_dump;	\
+	 nop;				\
+	TEXT(name)
+
+#else /* !CONFIG_MIPS_CPS_NS16550 */
+
+#define DUMP_EXCEP(name)
+
+#endif /* !CONFIG_MIPS_CPS_NS16550 */
+
 	/*
 	 * Set dest to non-zero if the core supports the MT ASE, else zero. If
 	 * MT is not supported then branch to nomt.
 	 */
 	.macro	has_mt	dest, nomt
-	mfc0	\dest, CP0_CONFIG
-	bgez	\dest, \nomt
-	 mfc0	\dest, CP0_CONFIG, 1
+	mfc0	\dest, CP0_CONFIG, 1
 	bgez	\dest, \nomt
 	 mfc0	\dest, CP0_CONFIG, 2
 	bgez	\dest, \nomt
@@ -47,11 +65,9 @@
 
 LEAF(mips_cps_core_entry)
 	/*
-	 * These first 12 bytes will be patched by cps_smp_setup to load the
-	 * base address of the CM GCRs into register v1 and the CCA to use into
-	 * register s0.
+	 * These first 4 bytes will be patched by cps_smp_setup to load the
+	 * CCA to use into register s0.
 	 */
-	.quad	0
 	.word	0
 
 	/* Check whether we're here due to an NMI */
@@ -71,7 +87,7 @@ not_nmi:
 	mtc0	t0, CP0_CAUSE
 
 	/* Setup Status */
-	li	t0, ST0_CU1 | ST0_CU0
+	li	t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
 	mtc0	t0, CP0_STATUS
 
 	/*
@@ -151,6 +167,12 @@ dcache_done:
 	mtc0	t0, CP0_CONFIG
 	ehb
 
+	/* Calculate an uncached address for the CM GCRs */
+	MFC0	v1, CP0_CMGCRBASE
+	PTR_SLL	v1, v1, 4
+	PTR_LI	t0, UNCAC_BASE
+	PTR_ADDU v1, v1, t0
+
 	/* Enter the coherent domain */
 	li	t0, 0xff
 	sw	t0, GCR_CL_COHERENCE_OFS(v1)
@@ -188,36 +210,42 @@ dcache_done:
 
 .org 0x200
 LEAF(excep_tlbfill)
+	DUMP_EXCEP("TLB Fill")
 	b	.
 	 nop
 	END(excep_tlbfill)
 
 .org 0x280
 LEAF(excep_xtlbfill)
+	DUMP_EXCEP("XTLB Fill")
 	b	.
 	 nop
 	END(excep_xtlbfill)
 
 .org 0x300
 LEAF(excep_cache)
+	DUMP_EXCEP("Cache")
 	b	.
 	 nop
 	END(excep_cache)
 
 .org 0x380
 LEAF(excep_genex)
+	DUMP_EXCEP("General")
 	b	.
 	 nop
 	END(excep_genex)
 
 .org 0x400
 LEAF(excep_intex)
+	DUMP_EXCEP("Interrupt")
 	b	.
 	 nop
 	END(excep_intex)
 
 .org 0x480
 LEAF(excep_ejtag)
+	DUMP_EXCEP("EJTAG")
 	PTR_LA	k0, ejtag_debug_handler
 	jr	k0
 	 nop
@@ -229,7 +257,6 @@ LEAF(mips_cps_core_init)
 	has_mt	t0, 3f
 
 	.set	push
-	.set	mips64r2
 	.set	mt
 
 	/* Only allow 1 TC per VPE to execute... */
@@ -348,7 +375,6 @@ LEAF(mips_cps_boot_vpes)
 	 nop
 
 	.set	push
-	.set	mips64r2
 	.set	mt
 
 1:	/* Enter VPE configuration state */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 09a51d091..6b9064499 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -536,8 +536,7 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
 		c->options |= MIPS_CPU_SEGMENTS;
 	if (config3 & MIPS_CONF3_MSA)
 		c->ases |= MIPS_ASE_MSA;
-	/* Only tested on 32-bit cores */
-	if ((config3 & MIPS_CONF3_PW) && config_enabled(CONFIG_32BIT)) {
+	if (config3 & MIPS_CONF3_PW) {
 		c->htw_seq = 0;
 		c->options |= MIPS_CPU_HTW;
 	}
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index e5ed7ada1..1f910563f 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -28,6 +28,43 @@ static u64 notrace r4k_read_sched_clock(void)
 	return read_c0_count();
 }
 
+static inline unsigned int rdhwr_count(void)
+{
+	unsigned int count;
+
+	__asm__ __volatile__(
+	"	.set push\n"
+	"	.set mips32r2\n"
+	"	rdhwr	%0, $2\n"
+	"	.set pop\n"
+	: "=r" (count));
+
+	return count;
+}
+
+static bool rdhwr_count_usable(void)
+{
+	unsigned int prev, curr, i;
+
+	/*
+	 * Older QEMUs have a broken implementation of RDHWR for the CP0 count
+	 * which always returns a constant value. Try to identify this and don't
+	 * use it in the VDSO if it is broken. This workaround can be removed
+	 * once the fix has been in QEMU stable for a reasonable amount of time.
+	 */
+	for (i = 0, prev = rdhwr_count(); i < 100; i++) {
+		curr = rdhwr_count();
+
+		if (curr != prev)
+			return true;
+
+		prev = curr;
+	}
+
+	pr_warn("Not using R4K clocksource in VDSO due to broken RDHWR\n");
+	return false;
+}
+
 int __init init_r4k_clocksource(void)
 {
 	if (!cpu_has_counter || !mips_hpt_frequency)
@@ -36,6 +73,13 @@ int __init init_r4k_clocksource(void)
 	/* Calculate a somewhat reasonable rating value */
 	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
 
+	/*
+	 * R2 onwards makes the count accessible to user mode so it can be used
+	 * by the VDSO (HWREna is configured by configure_hwrena()).
+	 */
+	if (cpu_has_mips_r2_r6 && rdhwr_count_usable())
+		clocksource_mips.archdata.vdso_clock_mode = VDSO_CLOCK_R4K;
+
 	clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
 
 	sched_clock_register(r4k_read_sched_clock, 32, mips_hpt_frequency);
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index ab1478d5a..46794d64c 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -134,6 +134,16 @@ void __init check_wait(void)
 		return;
 	}
 
+	/*
+	 * MIPSr6 specifies that masked interrupts should unblock an executing
+	 * wait instruction, and thus that it is safe for us to use
+	 * r4k_wait_irqoff. Yippee!
+	 */
+	if (cpu_has_mips_r6) {
+		cpu_wait = r4k_wait_irqoff;
+		return;
+	}
+
 	switch (current_cpu_type()) {
 	case CPU_R3081:
 	case CPU_R3081E:
@@ -155,12 +165,12 @@ void __init check_wait(void)
 	case CPU_4KEC:
 	case CPU_4KSC:
 	case CPU_5KC:
+	case CPU_5KE:
 	case CPU_25KF:
 	case CPU_PR4450:
 	case CPU_BMIPS3300:
 	case CPU_BMIPS4350:
 	case CPU_BMIPS4380:
-	case CPU_BMIPS5000:
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
@@ -171,7 +181,9 @@ void __init check_wait(void)
 	case CPU_XLP:
 		cpu_wait = r4k_wait;
 		break;
-
+	case CPU_BMIPS5000:
+		cpu_wait = r4k_wait_irqoff;
+		break;
 	case CPU_RM7000:
 		cpu_wait = rm7k_wait_irqoff;
 		break;
@@ -196,7 +208,6 @@ void __init check_wait(void)
 	case CPU_INTERAPTIV:
 	case CPU_M5150:
 	case CPU_QEMU_GENERIC:
-	case CPU_I6400:
 		cpu_wait = r4k_wait;
 		if (read_c0_config7() & MIPS_CONF7_WII)
 			cpu_wait = r4k_wait_irqoff;
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index b8ceee576..1448c1f43 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -9,6 +9,8 @@
  */
 
 #include <linux/errno.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
 
 #include <asm/mips-cm.h>
 #include <asm/mipsregs.h>
@@ -136,6 +138,9 @@ static char *cm3_causes[32] = {
 	"0x19", "0x1a", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f"
 };
 
+static DEFINE_PER_CPU_ALIGNED(spinlock_t, cm_core_lock);
+static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags);
+
 phys_addr_t __mips_cm_phys_base(void)
 {
 	u32 config3 = read_c0_config3();
@@ -200,6 +205,7 @@ int mips_cm_probe(void)
 {
 	phys_addr_t addr;
 	u32 base_reg;
+	unsigned cpu;
 
 	/*
 	 * No need to probe again if we have already been
@@ -247,38 +253,70 @@ int mips_cm_probe(void)
 	/* determine register width for this CM */
 	mips_cm_is64 = config_enabled(CONFIG_64BIT) && (mips_cm_revision() >= CM_REV_CM3);
 
+	for_each_possible_cpu(cpu)
+		spin_lock_init(&per_cpu(cm_core_lock, cpu));
+
 	return 0;
 }
 
-void mips_cm_error_report(void)
+void mips_cm_lock_other(unsigned int core, unsigned int vp)
 {
-	unsigned long revision = mips_cm_revision();
+	unsigned curr_core;
+	u32 val;
+
+	preempt_disable();
+	curr_core = current_cpu_data.core;
+	spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
+			  per_cpu(cm_core_lock_flags, curr_core));
+
+	if (mips_cm_revision() >= CM_REV_CM3) {
+		val = core << CM3_GCR_Cx_OTHER_CORE_SHF;
+		val |= vp << CM3_GCR_Cx_OTHER_VP_SHF;
+	} else {
+		BUG_ON(vp != 0);
+		val = core << CM_GCR_Cx_OTHER_CORENUM_SHF;
+	}
+
+	write_gcr_cl_other(val);
+
 	/*
-	 * CM3 has a 64-bit Error cause register with 0:57 containing the error
-	 * info and 63:58 the error type. For old CMs, everything is contained
-	 * in a single 32-bit register (0:26 and 31:27 respectively). Even
-	 * though the cm_error is u64, we will simply ignore the upper word
-	 * for CM2.
+	 * Ensure the core-other region reflects the appropriate core &
+	 * VP before any accesses to it occur.
 	 */
-	u64 cm_error = read_gcr_error_cause();
-	int cm_error_cause_sft = CM_GCR_ERROR_CAUSE_ERRTYPE_SHF +
-				 ((revision >= CM_REV_CM3) ? 31 : 0);
-	unsigned long cm_addr = read_gcr_error_addr();
-	unsigned long cm_other = read_gcr_error_mult();
+	mb();
+}
+
+void mips_cm_unlock_other(void)
+{
+	unsigned curr_core = current_cpu_data.core;
+
+	spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core),
+			       per_cpu(cm_core_lock_flags, curr_core));
+	preempt_enable();
+}
+
+void mips_cm_error_report(void)
+{
+	u64 cm_error, cm_addr, cm_other;
+	unsigned long revision;
 	int ocause, cause;
 	char buf[256];
 
 	if (!mips_cm_present())
 		return;
 
-	cause = cm_error >> cm_error_cause_sft;
+	revision = mips_cm_revision();
 
-	if (!cause)
-		/* All good */
-		return;
-
-	ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF;
 	if (revision < CM_REV_CM3) { /* CM2 */
+		cm_error = read_gcr_error_cause();
+		cm_addr = read_gcr_error_addr();
+		cm_other = read_gcr_error_mult();
+		cause = cm_error >> CM_GCR_ERROR_CAUSE_ERRTYPE_SHF;
+		ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF;
+
+		if (!cause)
+			return;
+
 		if (cause < 16) {
 			unsigned long cca_bits = (cm_error >> 15) & 7;
 			unsigned long tr_bits = (cm_error >> 12) & 7;
@@ -310,18 +348,30 @@ void mips_cm_error_report(void)
 		}
 			pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error,
 			       cm2_causes[cause], buf);
-		pr_err("CM_ADDR =%08lx\n", cm_addr);
-		pr_err("CM_OTHER=%08lx %s\n", cm_other, cm2_causes[ocause]);
+		pr_err("CM_ADDR =%08llx\n", cm_addr);
+		pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]);
 	} else { /* CM3 */
-	/* Used by cause == {1,2,3} */
-		unsigned long core_id_bits = (cm_error >> 22) & 0xf;
-		unsigned long vp_id_bits = (cm_error >> 18) & 0xf;
-		unsigned long cmd_bits = (cm_error >> 14) & 0xf;
-		unsigned long cmd_group_bits = (cm_error >> 11) & 0xf;
-		unsigned long cm3_cca_bits = (cm_error >> 8) & 7;
-		unsigned long mcp_bits = (cm_error >> 5) & 0xf;
-		unsigned long cm3_tr_bits = (cm_error >> 1) & 0xf;
-		unsigned long sched_bit = cm_error & 0x1;
+		ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
+		ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
+
+		cm_error = read64_gcr_error_cause();
+		cm_addr = read64_gcr_error_addr();
+		cm_other = read64_gcr_error_mult();
+		cause = cm_error >> CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF;
+		ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF;
+
+		if (!cause)
+			return;
+
+		/* Used by cause == {1,2,3} */
+		core_id_bits = (cm_error >> 22) & 0xf;
+		vp_id_bits = (cm_error >> 18) & 0xf;
+		cmd_bits = (cm_error >> 14) & 0xf;
+		cmd_group_bits = (cm_error >> 11) & 0xf;
+		cm3_cca_bits = (cm_error >> 8) & 7;
+		mcp_bits = (cm_error >> 5) & 0xf;
+		cm3_tr_bits = (cm_error >> 1) & 0xf;
+		sched_bit = cm_error & 0x1;
 
 		if (cause == 1 || cause == 3) { /* Tag ECC */
 			unsigned long tag_ecc = (cm_error >> 57) & 0x1;
@@ -363,12 +413,14 @@ void mips_cm_error_report(void)
 				 cm3_cmd_group[cmd_group_bits],
 				 cm3_cca_bits, 1 << mcp_bits,
 				 cm3_tr[cm3_tr_bits], sched_bit);
+		} else {
+			buf[0] = 0;
 		}
 
 		pr_err("CM_ERROR=%llx %s <%s>\n", cm_error,
 		       cm3_causes[cause], buf);
-		pr_err("CM_ADDR =%lx\n", cm_addr);
-		pr_err("CM_OTHER=%lx %s\n", cm_other, cm3_causes[ocause]);
+		pr_err("CM_ADDR =%llx\n", cm_addr);
+		pr_err("CM_OTHER=%llx %s\n", cm_other, cm3_causes[ocause]);
 	}
 
 	/* reprime cause register */
diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
index 8af4d627b..566b8d2c0 100644
--- a/arch/mips/kernel/mips-cpc.c
+++ b/arch/mips/kernel/mips-cpc.c
@@ -76,6 +76,12 @@ void mips_cpc_lock_other(unsigned int core)
 	spin_lock_irqsave(&per_cpu(cpc_core_lock, curr_core),
 			  per_cpu(cpc_core_lock_flags, curr_core));
 	write_cpc_cl_other(core << CPC_Cx_OTHER_CORENUM_SHF);
+
+	/*
+	 * Ensure the core-other region reflects the appropriate core &
+	 * VP before any accesses to it occur.
+	 */
+	mb();
 }
 
 void mips_cpc_unlock_other(void)
diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
index f2977f009..1f5aac7f9 100644
--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -22,6 +22,7 @@
 #include <asm/asm.h>
 #include <asm/branch.h>
 #include <asm/break.h>
+#include <asm/debug.h>
 #include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
 #include <asm/inst.h>
@@ -2363,7 +2364,6 @@ static const struct file_operations mipsr2_clear_fops = {
 
 static int __init mipsr2_init_debugfs(void)
 {
-	extern struct dentry	*mips_debugfs_dir;
 	struct dentry		*mipsr2_emul;
 
 	if (!mips_debugfs_dir)
diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index 291af0b5c..e2b6ab746 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -17,6 +17,7 @@
 #include <asm/fpu.h>
 #include <asm/msa.h>
 
+extern void *__bzero_kernel(void *__s, size_t __count);
 extern void *__bzero(void *__s, size_t __count);
 extern long __strncpy_from_kernel_nocheck_asm(char *__to,
 					      const char *__from, long __len);
@@ -64,6 +65,7 @@ EXPORT_SYMBOL(__copy_from_user_eva);
 EXPORT_SYMBOL(__copy_in_user_eva);
 EXPORT_SYMBOL(__copy_to_user_eva);
 EXPORT_SYMBOL(__copy_user_inatomic_eva);
+EXPORT_SYMBOL(__bzero_kernel);
 #endif
 EXPORT_SYMBOL(__bzero);
 EXPORT_SYMBOL(__strncpy_from_kernel_nocheck_asm);
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 65a74e4f0..2d23c834b 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -594,3 +594,4 @@ EXPORT(sys_call_table)
 	PTR	sys_execveat
 	PTR	sys_userfaultfd
 	PTR	sys_membarrier
+	PTR	sys_mlock2
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index e732981cf..deac63315 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -432,4 +432,5 @@ EXPORT(sys_call_table)
 	PTR	sys_execveat
 	PTR	sys_userfaultfd
 	PTR	sys_membarrier
+	PTR	sys_mlock2
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index c79484397..5a69eb48d 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -422,4 +422,5 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_execveat		/* 6320 */
 	PTR	sys_userfaultfd
 	PTR	sys_membarrier
+	PTR	sys_mlock2
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 6369cfd39..e4b6d7c97 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -577,4 +577,5 @@ EXPORT(sys32_call_table)
 	PTR	compat_sys_execveat
 	PTR	sys_userfaultfd
 	PTR	sys_membarrier
+	PTR	sys_mlock2
 	.size	sys32_call_table,.-sys32_call_table
diff --git a/arch/mips/kernel/segment.c b/arch/mips/kernel/segment.c
index 076ead2a9..87bc74a5a 100644
--- a/arch/mips/kernel/segment.c
+++ b/arch/mips/kernel/segment.c
@@ -10,6 +10,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <asm/cpu.h>
+#include <asm/debug.h>
 #include <asm/mipsregs.h>
 
 static void build_segment_config(char *str, unsigned int cfg)
@@ -91,7 +92,6 @@ static const struct file_operations segments_fops = {
 
 static int __init segments_info(void)
 {
-	extern struct dentry *mips_debugfs_dir;
 	struct dentry *segments;
 
 	if (cpu_has_segments) {
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 479515109..66aac55df 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -33,11 +33,16 @@
 #include <asm/cache.h>
 #include <asm/cdmm.h>
 #include <asm/cpu.h>
+#include <asm/debug.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/smp-ops.h>
 #include <asm/prom.h>
 
+#ifdef CONFIG_MIPS_ELF_APPENDED_DTB
+const char __section(.appended_dtb) __appended_dtb[0x100000];
+#endif /* CONFIG_MIPS_ELF_APPENDED_DTB */
+
 struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
 
 EXPORT_SYMBOL(cpu_data);
@@ -616,6 +621,10 @@ static void __init request_crashkernel(struct resource *res)
 }
 #endif /* !defined(CONFIG_KEXEC)  */
 
+#define USE_PROM_CMDLINE	IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER)
+#define USE_DTB_CMDLINE		IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB)
+#define EXTEND_WITH_PROM	IS_ENABLED(CONFIG_MIPS_CMDLINE_EXTEND)
+
 static void __init arch_mem_init(char **cmdline_p)
 {
 	struct memblock_region *reg;
@@ -640,18 +649,24 @@ static void __init arch_mem_init(char **cmdline_p)
 	pr_info("Determined physical RAM map:\n");
 	print_memory_map();
 
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
+#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
 	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
 #else
+	if ((USE_PROM_CMDLINE && arcs_cmdline[0]) ||
+	    (USE_DTB_CMDLINE && !boot_command_line[0]))
+		strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+
+	if (EXTEND_WITH_PROM && arcs_cmdline[0]) {
+		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+	}
+
+#if defined(CONFIG_CMDLINE_BOOL)
 	if (builtin_cmdline[0]) {
-		strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
-		strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
 	}
-	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
 #endif
-#else
-	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
 #endif
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 2fec67bfc..bf792e283 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -36,7 +36,6 @@
 #include <asm/ucontext.h>
 #include <asm/cpu-features.h>
 #include <asm/war.h>
-#include <asm/vdso.h>
 #include <asm/dsp.h>
 #include <asm/inst.h>
 #include <asm/msa.h>
@@ -752,16 +751,15 @@ static int setup_rt_frame(void *sig_return, struct ksignal *ksig,
 struct mips_abi mips_abi = {
 #ifdef CONFIG_TRAD_SIGNALS
 	.setup_frame	= setup_frame,
-	.signal_return_offset = offsetof(struct mips_vdso, signal_trampoline),
 #endif
 	.setup_rt_frame = setup_rt_frame,
-	.rt_signal_return_offset =
-		offsetof(struct mips_vdso, rt_signal_trampoline),
 	.restart	= __NR_restart_syscall,
 
 	.off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs),
 	.off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr),
 	.off_sc_used_math = offsetof(struct sigcontext, sc_used_math),
+
+	.vdso		= &vdso_image,
 };
 
 static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
@@ -801,11 +799,11 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 	}
 
 	if (sig_uses_siginfo(&ksig->ka))
-		ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset,
+		ret = abi->setup_rt_frame(vdso + abi->vdso->off_rt_sigreturn,
 					  ksig, regs, oldset);
 	else
-		ret = abi->setup_frame(vdso + abi->signal_return_offset, ksig,
-				       regs, oldset);
+		ret = abi->setup_frame(vdso + abi->vdso->off_sigreturn,
+				       ksig, regs, oldset);
 
 	signal_setup_done(ret, ksig, 0);
 }
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index f7e89524e..4909639aa 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -31,7 +31,6 @@
 #include <asm/ucontext.h>
 #include <asm/fpu.h>
 #include <asm/war.h>
-#include <asm/vdso.h>
 #include <asm/dsp.h>
 
 #include "signal-common.h"
@@ -406,14 +405,12 @@ static int setup_rt_frame_32(void *sig_return, struct ksignal *ksig,
  */
 struct mips_abi mips_abi_32 = {
 	.setup_frame	= setup_frame_32,
-	.signal_return_offset =
-		offsetof(struct mips_vdso, o32_signal_trampoline),
 	.setup_rt_frame = setup_rt_frame_32,
-	.rt_signal_return_offset =
-		offsetof(struct mips_vdso, o32_rt_signal_trampoline),
 	.restart	= __NR_O32_restart_syscall,
 
 	.off_sc_fpregs = offsetof(struct sigcontext32, sc_fpregs),
 	.off_sc_fpc_csr = offsetof(struct sigcontext32, sc_fpc_csr),
 	.off_sc_used_math = offsetof(struct sigcontext32, sc_used_math),
+
+	.vdso		= &vdso_image_o32,
 };
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index 0d017fdca..a7bc38430 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -38,7 +38,6 @@
 #include <asm/fpu.h>
 #include <asm/cpu-features.h>
 #include <asm/war.h>
-#include <asm/vdso.h>
 
 #include "signal-common.h"
 
@@ -151,11 +150,11 @@ static int setup_rt_frame_n32(void *sig_return, struct ksignal *ksig,
 
 struct mips_abi mips_abi_n32 = {
 	.setup_rt_frame = setup_rt_frame_n32,
-	.rt_signal_return_offset =
-		offsetof(struct mips_vdso, n32_rt_signal_trampoline),
 	.restart	= __NR_N32_restart_syscall,
 
 	.off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs),
 	.off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr),
 	.off_sc_used_math = offsetof(struct sigcontext, sc_used_math),
+
+	.vdso		= &vdso_image_n32,
 };
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index c88937745..e04c8057b 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -8,6 +8,7 @@
  * option) any later version.
  */
 
+#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/irqchip/mips-gic.h>
 #include <linux/sched.h>
@@ -37,8 +38,9 @@ static unsigned core_vpe_count(unsigned core)
 	if (!config_enabled(CONFIG_MIPS_MT_SMP) || !cpu_has_mipsmt)
 		return 1;
 
-	write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF);
+	mips_cm_lock_other(core, 0);
 	cfg = read_gcr_co_config() & CM_GCR_Cx_CONFIG_PVPE_MSK;
+	mips_cm_unlock_other();
 	return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1;
 }
 
@@ -133,11 +135,9 @@ static void __init cps_prepare_cpus(unsigned int max_cpus)
 	/*
 	 * Patch the start of mips_cps_core_entry to provide:
 	 *
-	 * v1 = CM base address
 	 * s0 = kseg0 CCA
 	 */
 	entry_code = (u32 *)&mips_cps_core_entry;
-	UASM_i_LA(&entry_code, 3, (long)mips_cm_base);
 	uasm_i_addiu(&entry_code, 16, 0, cca);
 	blast_dcache_range((unsigned long)&mips_cps_core_entry,
 			   (unsigned long)entry_code);
@@ -190,10 +190,11 @@ err_out:
 
 static void boot_core(unsigned core)
 {
-	u32 access;
+	u32 access, stat, seq_state;
+	unsigned timeout;
 
 	/* Select the appropriate core */
-	write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF);
+	mips_cm_lock_other(core, 0);
 
 	/* Set its reset vector */
 	write_gcr_co_reset_base(CKSEG1ADDR((unsigned long)mips_cps_core_entry));
@@ -210,12 +211,36 @@ static void boot_core(unsigned core)
 		/* Reset the core */
 		mips_cpc_lock_other(core);
 		write_cpc_co_cmd(CPC_Cx_CMD_RESET);
+
+		timeout = 100;
+		while (true) {
+			stat = read_cpc_co_stat_conf();
+			seq_state = stat & CPC_Cx_STAT_CONF_SEQSTATE_MSK;
+
+			/* U6 == coherent execution, ie. the core is up */
+			if (seq_state == CPC_Cx_STAT_CONF_SEQSTATE_U6)
+				break;
+
+			/* Delay a little while before we start warning */
+			if (timeout) {
+				timeout--;
+				mdelay(10);
+				continue;
+			}
+
+			pr_warn("Waiting for core %u to start... STAT_CONF=0x%x\n",
+				core, stat);
+			mdelay(1000);
+		}
+
 		mips_cpc_unlock_other();
 	} else {
 		/* Take the core out of reset */
 		write_gcr_co_reset_release(0);
 	}
 
+	mips_cm_unlock_other();
+
 	/* The core is now powered up */
 	bitmap_set(core_power, core, 1);
 }
diff --git a/arch/mips/kernel/smp-gic.c b/arch/mips/kernel/smp-gic.c
index 5f0ab5bcd..9b63829cf 100644
--- a/arch/mips/kernel/smp-gic.c
+++ b/arch/mips/kernel/smp-gic.c
@@ -46,9 +46,11 @@ void gic_send_ipi_single(int cpu, unsigned int action)
 
 	if (mips_cpc_present() && (core != current_cpu_data.core)) {
 		while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
+			mips_cm_lock_other(core, 0);
 			mips_cpc_lock_other(core);
 			write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
 			mips_cpc_unlock_other();
+			mips_cm_unlock_other();
 		}
 	}
 
diff --git a/arch/mips/kernel/spinlock_test.c b/arch/mips/kernel/spinlock_test.c
index 39f7ab7b0..f7d86955d 100644
--- a/arch/mips/kernel/spinlock_test.c
+++ b/arch/mips/kernel/spinlock_test.c
@@ -5,7 +5,7 @@
 #include <linux/debugfs.h>
 #include <linux/export.h>
 #include <linux/spinlock.h>
-
+#include <asm/debug.h>
 
 static int ss_get(void *data, u64 *val)
 {
@@ -115,8 +115,6 @@ static int multi_get(void *data, u64 *val)
 
 DEFINE_SIMPLE_ATTRIBUTE(fops_multi, multi_get, NULL, "%llu\n");
 
-
-extern struct dentry *mips_debugfs_dir;
 static int __init spinlock_test(void)
 {
 	struct dentry *d;
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index 1ba775d24..506021f62 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -12,14 +12,15 @@
  * Save stack-backtrace addresses into a stack_trace buffer:
  */
 static void save_raw_context_stack(struct stack_trace *trace,
-	unsigned long reg29)
+	unsigned long reg29, int savesched)
 {
 	unsigned long *sp = (unsigned long *)reg29;
 	unsigned long addr;
 
 	while (!kstack_end(sp)) {
 		addr = *sp++;
-		if (__kernel_text_address(addr)) {
+		if (__kernel_text_address(addr) &&
+		    (savesched || !in_sched_functions(addr))) {
 			if (trace->skip > 0)
 				trace->skip--;
 			else
@@ -31,7 +32,7 @@ static void save_raw_context_stack(struct stack_trace *trace,
 }
 
 static void save_context_stack(struct stack_trace *trace,
-	struct task_struct *tsk, struct pt_regs *regs)
+	struct task_struct *tsk, struct pt_regs *regs, int savesched)
 {
 	unsigned long sp = regs->regs[29];
 #ifdef CONFIG_KALLSYMS
@@ -43,20 +44,22 @@ static void save_context_stack(struct stack_trace *trace,
 			(unsigned long)task_stack_page(tsk);
 		if (stack_page && sp >= stack_page &&
 		    sp <= stack_page + THREAD_SIZE - 32)
-			save_raw_context_stack(trace, sp);
+			save_raw_context_stack(trace, sp, savesched);
 		return;
 	}
 	do {
-		if (trace->skip > 0)
-			trace->skip--;
-		else
-			trace->entries[trace->nr_entries++] = pc;
-		if (trace->nr_entries >= trace->max_entries)
-			break;
+		if (savesched || !in_sched_functions(pc)) {
+			if (trace->skip > 0)
+				trace->skip--;
+			else
+				trace->entries[trace->nr_entries++] = pc;
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
 		pc = unwind_stack(tsk, &sp, pc, &ra);
 	} while (pc);
 #else
-	save_raw_context_stack(trace, sp);
+	save_raw_context_stack(trace, sp, savesched);
 #endif
 }
 
@@ -82,6 +85,6 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 		regs->cp0_epc = tsk->thread.reg31;
 	} else
 		prepare_frametrace(regs);
-	save_context_stack(trace, tsk, regs);
+	save_context_stack(trace, tsk, regs, tsk == current);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index fdb392b27..886cb1976 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -37,6 +37,7 @@
 #include <linux/irq.h>
 #include <linux/perf_event.h>
 
+#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
 #include <asm/break.h>
@@ -1856,12 +1857,14 @@ void __noreturn nmi_exception_handler(struct pt_regs *regs)
 {
 	char str[100];
 
+	nmi_enter();
 	raw_notifier_call_chain(&nmi_chain, 0, regs);
 	bust_spinlocks(1);
 	snprintf(str, 100, "CPU%d NMI taken, CP0_EPC=%lx\n",
 		 smp_processor_id(), regs->cp0_epc);
 	regs->cp0_epc = read_c0_errorepc();
 	die(str, regs);
+	nmi_exit();
 }
 
 #define VECTORSPACING 0x100	/* for EI/VI mode */
@@ -2204,12 +2207,8 @@ void __init trap_init(void)
 		ebase = (unsigned long)
 			__alloc_bootmem(size, 1 << fls(size), 0);
 	} else {
-#ifdef CONFIG_KVM_GUEST
-#define KVM_GUEST_KSEG0     0x40000000
-        ebase = KVM_GUEST_KSEG0;
-#else
-        ebase = CKSEG0;
-#endif
+		ebase = CAC_BASE;
+
 		if (cpu_has_mips_r2_r6)
 			ebase += (read_c0_ebase() & 0x3ffff000);
 	}
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 990354dd6..490cea569 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -85,6 +85,7 @@
 #include <asm/branch.h>
 #include <asm/byteorder.h>
 #include <asm/cop2.h>
+#include <asm/debug.h>
 #include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
 #include <asm/inst.h>
@@ -2295,7 +2296,6 @@ sigbus:
 }
 
 #ifdef CONFIG_DEBUG_FS
-extern struct dentry *mips_debugfs_dir;
 static int __init debugfs_unaligned(void)
 {
 	struct dentry *d;
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
index ed2a27872..975e99759 100644
--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@@ -1,122 +1,175 @@
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
  *
- * Copyright (C) 2009, 2010 Cavium Networks, Inc.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  */
 
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/init.h>
 #include <linux/binfmts.h>
 #include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/unistd.h>
-#include <linux/random.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/timekeeper_internal.h>
 
+#include <asm/abi.h>
 #include <asm/vdso.h>
-#include <asm/uasm.h>
-#include <asm/processor.h>
+
+/* Kernel-provided data used by the VDSO. */
+static union mips_vdso_data vdso_data __page_aligned_data;
 
 /*
- * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
+ * Mapping for the VDSO data/GIC pages. The real pages are mapped manually, as
+ * what we map and where within the area they are mapped is determined at
+ * runtime.
  */
-#define __NR_O32_sigreturn		4119
-#define __NR_O32_rt_sigreturn		4193
-#define __NR_N32_rt_sigreturn		6211
+static struct page *no_pages[] = { NULL };
+static struct vm_special_mapping vdso_vvar_mapping = {
+	.name = "[vvar]",
+	.pages = no_pages,
+};
 
-static struct page *vdso_page;
-
-static void __init install_trampoline(u32 *tramp, unsigned int sigreturn)
+static void __init init_vdso_image(struct mips_vdso_image *image)
 {
-	uasm_i_addiu(&tramp, 2, 0, sigreturn);	/* li v0, sigreturn */
-	uasm_i_syscall(&tramp, 0);
+	unsigned long num_pages, i;
+
+	BUG_ON(!PAGE_ALIGNED(image->data));
+	BUG_ON(!PAGE_ALIGNED(image->size));
+
+	num_pages = image->size / PAGE_SIZE;
+
+	for (i = 0; i < num_pages; i++) {
+		image->mapping.pages[i] =
+			virt_to_page(image->data + (i * PAGE_SIZE));
+	}
 }
 
 static int __init init_vdso(void)
 {
-	struct mips_vdso *vdso;
-
-	vdso_page = alloc_page(GFP_KERNEL);
-	if (!vdso_page)
-		panic("Cannot allocate vdso");
-
-	vdso = vmap(&vdso_page, 1, 0, PAGE_KERNEL);
-	if (!vdso)
-		panic("Cannot map vdso");
-	clear_page(vdso);
-
-	install_trampoline(vdso->rt_signal_trampoline, __NR_rt_sigreturn);
-#ifdef CONFIG_32BIT
-	install_trampoline(vdso->signal_trampoline, __NR_sigreturn);
-#else
-	install_trampoline(vdso->n32_rt_signal_trampoline,
-			   __NR_N32_rt_sigreturn);
-	install_trampoline(vdso->o32_signal_trampoline, __NR_O32_sigreturn);
-	install_trampoline(vdso->o32_rt_signal_trampoline,
-			   __NR_O32_rt_sigreturn);
+	init_vdso_image(&vdso_image);
+
+#ifdef CONFIG_MIPS32_O32
+	init_vdso_image(&vdso_image_o32);
 #endif
 
-	vunmap(vdso);
+#ifdef CONFIG_MIPS32_N32
+	init_vdso_image(&vdso_image_n32);
+#endif
 
 	return 0;
 }
 subsys_initcall(init_vdso);
 
-static unsigned long vdso_addr(unsigned long start)
+void update_vsyscall(struct timekeeper *tk)
 {
-	unsigned long offset = 0UL;
-
-	if (current->flags & PF_RANDOMIZE) {
-		offset = get_random_int();
-		offset <<= PAGE_SHIFT;
-		if (TASK_IS_32BIT_ADDR)
-			offset &= 0xfffffful;
-		else
-			offset &= 0xffffffful;
+	vdso_data_write_begin(&vdso_data);
+
+	vdso_data.xtime_sec = tk->xtime_sec;
+	vdso_data.xtime_nsec = tk->tkr_mono.xtime_nsec;
+	vdso_data.wall_to_mono_sec = tk->wall_to_monotonic.tv_sec;
+	vdso_data.wall_to_mono_nsec = tk->wall_to_monotonic.tv_nsec;
+	vdso_data.cs_shift = tk->tkr_mono.shift;
+
+	vdso_data.clock_mode = tk->tkr_mono.clock->archdata.vdso_clock_mode;
+	if (vdso_data.clock_mode != VDSO_CLOCK_NONE) {
+		vdso_data.cs_mult = tk->tkr_mono.mult;
+		vdso_data.cs_cycle_last = tk->tkr_mono.cycle_last;
+		vdso_data.cs_mask = tk->tkr_mono.mask;
 	}
 
-	return STACK_TOP + offset;
+	vdso_data_write_end(&vdso_data);
+}
+
+void update_vsyscall_tz(void)
+{
+	if (vdso_data.clock_mode != VDSO_CLOCK_NONE) {
+		vdso_data.tz_minuteswest = sys_tz.tz_minuteswest;
+		vdso_data.tz_dsttime = sys_tz.tz_dsttime;
+	}
 }
 
 int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 {
-	int ret;
-	unsigned long addr;
+	struct mips_vdso_image *image = current->thread.abi->vdso;
 	struct mm_struct *mm = current->mm;
+	unsigned long gic_size, vvar_size, size, base, data_addr, vdso_addr;
+	struct vm_area_struct *vma;
+	struct resource gic_res;
+	int ret;
 
 	down_write(&mm->mmap_sem);
 
-	addr = vdso_addr(mm->start_stack);
+	/*
+	 * Determine total area size. This includes the VDSO data itself, the
+	 * data page, and the GIC user page if present. Always create a mapping
+	 * for the GIC user area if the GIC is present regardless of whether it
+	 * is the current clocksource, in case it comes into use later on. We
+	 * only map a page even though the total area is 64K, as we only need
+	 * the counter registers at the start.
+	 */
+	gic_size = gic_present ? PAGE_SIZE : 0;
+	vvar_size = gic_size + PAGE_SIZE;
+	size = vvar_size + image->size;
+
+	base = get_unmapped_area(NULL, 0, size, 0, 0);
+	if (IS_ERR_VALUE(base)) {
+		ret = base;
+		goto out;
+	}
+
+	data_addr = base + gic_size;
+	vdso_addr = data_addr + PAGE_SIZE;
 
-	addr = get_unmapped_area(NULL, addr, PAGE_SIZE, 0, 0);
-	if (IS_ERR_VALUE(addr)) {
-		ret = addr;
-		goto up_fail;
+	vma = _install_special_mapping(mm, base, vvar_size,
+				       VM_READ | VM_MAYREAD,
+				       &vdso_vvar_mapping);
+	if (IS_ERR(vma)) {
+		ret = PTR_ERR(vma);
+		goto out;
 	}
 
-	ret = install_special_mapping(mm, addr, PAGE_SIZE,
-				      VM_READ|VM_EXEC|
-				      VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
-				      &vdso_page);
+	/* Map GIC user page. */
+	if (gic_size) {
+		ret = gic_get_usm_range(&gic_res);
+		if (ret)
+			goto out;
+
+		ret = io_remap_pfn_range(vma, base,
+					 gic_res.start >> PAGE_SHIFT,
+					 gic_size,
+					 pgprot_noncached(PAGE_READONLY));
+		if (ret)
+			goto out;
+	}
 
+	/* Map data page. */
+	ret = remap_pfn_range(vma, data_addr,
+			      virt_to_phys(&vdso_data) >> PAGE_SHIFT,
+			      PAGE_SIZE, PAGE_READONLY);
 	if (ret)
-		goto up_fail;
+		goto out;
+
+	/* Map VDSO image. */
+	vma = _install_special_mapping(mm, vdso_addr, image->size,
+				       VM_READ | VM_EXEC |
+				       VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+				       &image->mapping);
+	if (IS_ERR(vma)) {
+		ret = PTR_ERR(vma);
+		goto out;
+	}
 
-	mm->context.vdso = (void *)addr;
+	mm->context.vdso = (void *)vdso_addr;
+	ret = 0;
 
-up_fail:
+out:
 	up_write(&mm->mmap_sem);
 	return ret;
 }
-
-const char *arch_vma_name(struct vm_area_struct *vma)
-{
-	if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
-		return "[vdso]";
-	return NULL;
-}
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 07d32a4ae..0a93e83cd 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -17,7 +17,9 @@ OUTPUT_ARCH(mips)
 ENTRY(kernel_entry)
 PHDRS {
 	text PT_LOAD FLAGS(7);	/* RWX */
+#ifndef CONFIG_CAVIUM_OCTEON_SOC
 	note PT_NOTE FLAGS(4);	/* R__ */
+#endif /* CAVIUM_OCTEON_SOC */
 }
 
 #ifdef CONFIG_32BIT
@@ -71,7 +73,12 @@ SECTIONS
 		__stop___dbe_table = .;
 	}
 
-	NOTES :text :note
+#ifdef CONFIG_CAVIUM_OCTEON_SOC
+#define NOTES_HEADER
+#else /* CONFIG_CAVIUM_OCTEON_SOC */
+#define NOTES_HEADER :note
+#endif /* CONFIG_CAVIUM_OCTEON_SOC */
+	NOTES :text NOTES_HEADER
 	.dummy : { *(.dummy) } :text
 
 	_sdata = .;			/* Start of data section */
@@ -132,6 +139,11 @@ SECTIONS
 	__appended_dtb = .;
 	/* leave space for appended DTB */
 	. += 0x100000;
+#elif defined(CONFIG_MIPS_ELF_APPENDED_DTB)
+	.appended_dtb : AT(ADDR(.appended_dtb) - LOAD_OFFSET) {
+		*(.appended_dtb)
+		KEEP(*(.appended_dtb))
+	}
 #endif
 	/*
 	 * Align to 64K in attempt to eliminate holes before the
@@ -181,6 +193,7 @@ SECTIONS
 	DISCARDS
 	/DISCARD/ : {
 		/* ABI crap starts here */
+		*(.MIPS.abiflags)
 		*(.MIPS.options)
 		*(.options)
 		*(.pdr)
diff --git a/arch/mips/kvm/locore.S b/arch/mips/kvm/locore.S
index d1ee95a7f..7e2210846 100644
--- a/arch/mips/kvm/locore.S
+++ b/arch/mips/kvm/locore.S
@@ -36,14 +36,6 @@
 #define PT_HOST_USERLOCAL   PT_EPC
 
 #define CP0_DDATA_LO        $28,3
-#define CP0_CONFIG3         $16,3
-#define CP0_CONFIG5         $16,5
-#define CP0_EBASE           $15,1
-
-#define CP0_INTCTL          $12,1
-#define CP0_SRSCTL          $12,2
-#define CP0_SRSMAP          $12,3
-#define CP0_HWRENA          $7,0
 
 /* Resume Flags */
 #define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
index 77e4bdb1f..7376ce817 100644
--- a/arch/mips/lantiq/clk.h
+++ b/arch/mips/lantiq/clk.h
@@ -31,13 +31,18 @@
 #define CLOCK_240M	240000000
 #define CLOCK_250M	250000000
 #define CLOCK_266M	266666666
+#define CLOCK_288M	288888888
 #define CLOCK_300M	300000000
 #define CLOCK_333M	333333333
+#define CLOCK_360M	360000000
 #define CLOCK_393M	393215332
 #define CLOCK_400M	400000000
+#define CLOCK_432M	432000000
 #define CLOCK_450M	450000000
 #define CLOCK_500M	500000000
 #define CLOCK_600M	600000000
+#define CLOCK_666M	666666666
+#define CLOCK_720M	720000000
 
 /* clock out speeds */
 #define CLOCK_32_768K	32768
@@ -80,4 +85,12 @@ extern unsigned long ltq_vr9_cpu_hz(void);
 extern unsigned long ltq_vr9_fpi_hz(void);
 extern unsigned long ltq_vr9_pp32_hz(void);
 
+extern unsigned long ltq_ar10_cpu_hz(void);
+extern unsigned long ltq_ar10_fpi_hz(void);
+extern unsigned long ltq_ar10_pp32_hz(void);
+
+extern unsigned long ltq_grx390_cpu_hz(void);
+extern unsigned long ltq_grx390_fpi_hz(void);
+extern unsigned long ltq_grx390_pp32_hz(void);
+
 #endif
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index 2c218c3bb..2e7f60c9f 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -369,8 +369,8 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 		if (of_address_to_resource(node, i, &res))
 			panic("Failed to get icu memory range");
 
-		if (request_mem_region(res.start, resource_size(&res),
-					res.name) < 0)
+		if (!request_mem_region(res.start, resource_size(&res),
+					res.name))
 			pr_err("Failed to request icu memory");
 
 		ltq_icu_membase[i] = ioremap_nocache(res.start,
@@ -449,8 +449,8 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 		if (ret != exin_avail)
 			panic("failed to load external irq resources");
 
-		if (request_mem_region(res.start, resource_size(&res),
-							res.name) < 0)
+		if (!request_mem_region(res.start, resource_size(&res),
+							res.name))
 			pr_err("Failed to request eiu memory");
 
 		ltq_eiu_membase = ioremap_nocache(res.start,
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index 0db099ecc..297bcaa6b 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -77,8 +77,6 @@ void __init plat_mem_setup(void)
 	 * parsed resulting in our memory appearing
 	 */
 	__dt_setup_arch(__dtb_start);
-
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 }
 
 void __init device_tree_init(void)
diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
index 8750dc0a1..07f6d5b0b 100644
--- a/arch/mips/lantiq/xway/clk.c
+++ b/arch/mips/lantiq/xway/clk.c
@@ -4,6 +4,7 @@
  *  by the Free Software Foundation.
  *
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
  */
 
 #include <linux/io.h>
@@ -25,9 +26,9 @@ static unsigned int ram_clocks[] = {
 /* legacy xway clock */
 #define CGU_SYS			0x10
 
-/* vr9 clock */
-#define CGU_SYS_VR9		0x0c
-#define CGU_IF_CLK_VR9		0x24
+/* vr9, ar10/grx390 clock */
+#define CGU_SYS_XRX		0x0c
+#define CGU_IF_CLK_AR10		0x24
 
 unsigned long ltq_danube_fpi_hz(void)
 {
@@ -87,8 +88,9 @@ unsigned long ltq_ar9_fpi_hz(void)
 	unsigned long sys = ltq_ar9_sys_hz();
 
 	if (ltq_cgu_r32(CGU_SYS) & BIT(0))
-		return sys;
-	return sys >> 1;
+		return sys / 3;
+	else
+		return sys / 2;
 }
 
 unsigned long ltq_ar9_cpu_hz(void)
@@ -104,7 +106,7 @@ unsigned long ltq_vr9_cpu_hz(void)
 	unsigned int cpu_sel;
 	unsigned long clk;
 
-	cpu_sel = (ltq_cgu_r32(CGU_SYS_VR9) >> 4) & 0xf;
+	cpu_sel = (ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0xf;
 
 	switch (cpu_sel) {
 	case 0:
@@ -145,7 +147,7 @@ unsigned long ltq_vr9_fpi_hz(void)
 	unsigned long clk;
 
 	cpu_clk = ltq_vr9_cpu_hz();
-	ocp_sel = ltq_cgu_r32(CGU_SYS_VR9) & 0x3;
+	ocp_sel = ltq_cgu_r32(CGU_SYS_XRX) & 0x3;
 
 	switch (ocp_sel) {
 	case 0:
@@ -174,15 +176,18 @@ unsigned long ltq_vr9_fpi_hz(void)
 
 unsigned long ltq_vr9_pp32_hz(void)
 {
-	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 3;
+	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7;
 	unsigned long clk;
 
 	switch (clksys) {
+	case 0:
+		clk = CLOCK_500M;
+		break;
 	case 1:
-		clk = CLOCK_450M;
+		clk = CLOCK_432M;
 		break;
 	case 2:
-		clk = CLOCK_300M;
+		clk = CLOCK_288M;
 		break;
 	default:
 		clk = CLOCK_500M;
@@ -191,3 +196,158 @@ unsigned long ltq_vr9_pp32_hz(void)
 
 	return clk;
 }
+
+unsigned long ltq_ar10_cpu_hz(void)
+{
+	unsigned int clksys;
+	int cpu_fs = (ltq_cgu_r32(CGU_SYS_XRX) >> 8) & 0x1;
+	int freq_div = (ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0x7;
+
+	switch (cpu_fs) {
+	case 0:
+		clksys = CLOCK_500M;
+		break;
+	case 1:
+		clksys = CLOCK_600M;
+		break;
+	default:
+		clksys = CLOCK_500M;
+		break;
+	}
+
+	switch (freq_div) {
+	case 0:
+		return clksys;
+	case 1:
+		return clksys >> 1;
+	case 2:
+		return clksys >> 2;
+	default:
+		return clksys;
+	}
+}
+
+unsigned long ltq_ar10_fpi_hz(void)
+{
+	int freq_fpi = (ltq_cgu_r32(CGU_IF_CLK_AR10) >> 25) & 0xf;
+
+	switch (freq_fpi) {
+	case 1:
+		return CLOCK_300M;
+	case 5:
+		return CLOCK_250M;
+	case 2:
+		return CLOCK_150M;
+	case 6:
+		return CLOCK_125M;
+
+	default:
+		return CLOCK_125M;
+	}
+}
+
+unsigned long ltq_ar10_pp32_hz(void)
+{
+	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7;
+	unsigned long clk;
+
+	switch (clksys) {
+	case 1:
+		clk = CLOCK_250M;
+		break;
+	case 4:
+		clk = CLOCK_400M;
+		break;
+	default:
+		clk = CLOCK_250M;
+		break;
+	}
+
+	return clk;
+}
+
+unsigned long ltq_grx390_cpu_hz(void)
+{
+	unsigned int clksys;
+	int cpu_fs = ((ltq_cgu_r32(CGU_SYS_XRX) >> 9) & 0x3);
+	int freq_div = ((ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0x7);
+
+	switch (cpu_fs) {
+	case 0:
+		clksys = CLOCK_600M;
+		break;
+	case 1:
+		clksys = CLOCK_666M;
+		break;
+	case 2:
+		clksys = CLOCK_720M;
+		break;
+	default:
+		clksys = CLOCK_600M;
+		break;
+	}
+
+	switch (freq_div) {
+	case 0:
+		return clksys;
+	case 1:
+		return clksys >> 1;
+	case 2:
+		return clksys >> 2;
+	default:
+		return clksys;
+	}
+}
+
+unsigned long ltq_grx390_fpi_hz(void)
+{
+	/* fpi clock is derived from ddr_clk */
+	unsigned int clksys;
+	int cpu_fs = ((ltq_cgu_r32(CGU_SYS_XRX) >> 9) & 0x3);
+	int freq_div = ((ltq_cgu_r32(CGU_SYS_XRX)) & 0x7);
+	switch (cpu_fs) {
+	case 0:
+		clksys = CLOCK_600M;
+		break;
+	case 1:
+		clksys = CLOCK_666M;
+		break;
+	case 2:
+		clksys = CLOCK_720M;
+		break;
+	default:
+		clksys = CLOCK_600M;
+		break;
+	}
+
+	switch (freq_div) {
+	case 1:
+		return clksys >> 1;
+	case 2:
+		return clksys >> 2;
+	default:
+		return clksys >> 1;
+	}
+}
+
+unsigned long ltq_grx390_pp32_hz(void)
+{
+	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7;
+	unsigned long clk;
+
+	switch (clksys) {
+	case 1:
+		clk = CLOCK_250M;
+		break;
+	case 2:
+		clk = CLOCK_432M;
+		break;
+	case 4:
+		clk = CLOCK_400M;
+		break;
+	default:
+		clk = CLOCK_250M;
+		break;
+	}
+	return clk;
+}
diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c
index 248429ab2..8f6e02f1e 100644
--- a/arch/mips/lantiq/xway/prom.c
+++ b/arch/mips/lantiq/xway/prom.c
@@ -4,6 +4,7 @@
  *  by the Free Software Foundation.
  *
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
  */
 
 #include <linux/export.h>
@@ -19,8 +20,11 @@
 #define SOC_TWINPASS	"Twinpass"
 #define SOC_AMAZON_SE	"Amazon_SE"
 #define SOC_AR9		"AR9"
-#define SOC_GR9		"GR9"
-#define SOC_VR9		"VR9"
+#define SOC_GR9		"GRX200"
+#define SOC_VR9		"xRX200"
+#define SOC_VRX220	"xRX220"
+#define SOC_AR10	"xRX300"
+#define SOC_GRX390	"xRX330"
 
 #define COMP_DANUBE	"lantiq,danube"
 #define COMP_TWINPASS	"lantiq,twinpass"
@@ -28,6 +32,8 @@
 #define COMP_AR9	"lantiq,ar9"
 #define COMP_GR9	"lantiq,gr9"
 #define COMP_VR9	"lantiq,vr9"
+#define COMP_AR10	"lantiq,ar10"
+#define COMP_GRX390	"lantiq,grx390"
 
 #define PART_SHIFT	12
 #define PART_MASK	0x0FFFFFFF
@@ -101,6 +107,12 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
 		i->compatible = COMP_VR9;
 		break;
 
+	case SOC_ID_VRX220:
+		i->name = SOC_VRX220;
+		i->type = SOC_TYPE_VRX220;
+		i->compatible = COMP_VR9;
+		break;
+
 	case SOC_ID_GRX282_2:
 	case SOC_ID_GRX288_2:
 		i->name = SOC_GR9;
@@ -108,6 +120,25 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
 		i->compatible = COMP_GR9;
 		break;
 
+	case SOC_ID_ARX362:
+	case SOC_ID_ARX368:
+	case SOC_ID_ARX382:
+	case SOC_ID_ARX388:
+	case SOC_ID_URX388:
+		i->name = SOC_AR10;
+		i->type = SOC_TYPE_AR10;
+		i->compatible = COMP_AR10;
+		break;
+
+	case SOC_ID_GRX383:
+	case SOC_ID_GRX369:
+	case SOC_ID_GRX387:
+	case SOC_ID_GRX389:
+		i->name = SOC_GRX390;
+		i->type = SOC_TYPE_GRX390;
+		i->compatible = COMP_GRX390;
+		break;
+
 	default:
 		unreachable();
 		break;
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
index fe68f9ae4..bc29bb349 100644
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -4,6 +4,7 @@
  *  by the Free Software Foundation.
  *
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
  */
 
 #include <linux/init.h>
@@ -22,9 +23,6 @@
 
 #include "../prom.h"
 
-#define ltq_rcu_w32(x, y)	ltq_w32((x), ltq_rcu_membase + (y))
-#define ltq_rcu_r32(x)		ltq_r32(ltq_rcu_membase + (x))
-
 /* reset request register */
 #define RCU_RST_REQ		0x0010
 /* reset status register */
@@ -32,11 +30,33 @@
 /* vr9 gphy registers */
 #define RCU_GFS_ADD0_XRX200	0x0020
 #define RCU_GFS_ADD1_XRX200	0x0068
+/* xRX300 gphy registers */
+#define RCU_GFS_ADD0_XRX300	0x0020
+#define RCU_GFS_ADD1_XRX300	0x0058
+#define RCU_GFS_ADD2_XRX300	0x00AC
+/* xRX330 gphy registers */
+#define RCU_GFS_ADD0_XRX330	0x0020
+#define RCU_GFS_ADD1_XRX330	0x0058
+#define RCU_GFS_ADD2_XRX330	0x00AC
+#define RCU_GFS_ADD3_XRX330	0x0264
+
+/* xbar BE flag */
+#define RCU_AHB_ENDIAN          0x004C
+#define RCU_VR9_BE_AHB1S        0x00000008
 
 /* reboot bit */
 #define RCU_RD_GPHY0_XRX200	BIT(31)
 #define RCU_RD_SRST		BIT(30)
 #define RCU_RD_GPHY1_XRX200	BIT(29)
+/* xRX300 bits */
+#define RCU_RD_GPHY0_XRX300	BIT(31)
+#define RCU_RD_GPHY1_XRX300	BIT(29)
+#define RCU_RD_GPHY2_XRX300	BIT(28)
+/* xRX330 bits */
+#define RCU_RD_GPHY0_XRX330	BIT(31)
+#define RCU_RD_GPHY1_XRX330	BIT(29)
+#define RCU_RD_GPHY2_XRX330	BIT(28)
+#define RCU_RD_GPHY3_XRX330	BIT(10)
 
 /* reset cause */
 #define RCU_STAT_SHIFT		26
@@ -44,9 +64,60 @@
 #define RCU_BOOT_SEL(x)		((x >> 18) & 0x7)
 #define RCU_BOOT_SEL_XRX200(x)	(((x >> 17) & 0xf) | ((x >> 8) & 0x10))
 
+/* dwc2 USB configuration registers */
+#define RCU_USB1CFG		0x0018
+#define RCU_USB2CFG		0x0034
+
+/* USB DMA endianness bits */
+#define RCU_USBCFG_HDSEL_BIT	BIT(11)
+#define RCU_USBCFG_HOST_END_BIT	BIT(10)
+#define RCU_USBCFG_SLV_END_BIT	BIT(9)
+
+/* USB reset bits */
+#define RCU_USBRESET		0x0010
+
+#define USBRESET_BIT		BIT(4)
+
+#define RCU_USBRESET2		0x0048
+
+#define USB1RESET_BIT		BIT(4)
+#define USB2RESET_BIT		BIT(5)
+
+#define RCU_CFG1A		0x0038
+#define RCU_CFG1B		0x003C
+
+/* USB PMU devices */
+#define PMU_AHBM		BIT(15)
+#define PMU_USB0		BIT(6)
+#define PMU_USB1		BIT(27)
+
+/* USB PHY PMU devices */
+#define PMU_USB0_P		BIT(0)
+#define PMU_USB1_P		BIT(26)
+
 /* remapped base addr of the reset control unit */
 static void __iomem *ltq_rcu_membase;
 static struct device_node *ltq_rcu_np;
+static DEFINE_SPINLOCK(ltq_rcu_lock);
+
+static void ltq_rcu_w32(uint32_t val, uint32_t reg_off)
+{
+	ltq_w32(val, ltq_rcu_membase + reg_off);
+}
+
+static uint32_t ltq_rcu_r32(uint32_t reg_off)
+{
+	return ltq_r32(ltq_rcu_membase + reg_off);
+}
+
+static void ltq_rcu_w32_mask(uint32_t clr, uint32_t set, uint32_t reg_off)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ltq_rcu_lock, flags);
+	ltq_rcu_w32((ltq_rcu_r32(reg_off) & ~(clr)) | (set), reg_off);
+	spin_unlock_irqrestore(&ltq_rcu_lock, flags);
+}
 
 /* This function is used by the watchdog driver */
 int ltq_reset_cause(void)
@@ -67,15 +138,40 @@ unsigned char ltq_boot_select(void)
 	return RCU_BOOT_SEL(val);
 }
 
-/* reset / boot a gphy */
-static struct ltq_xrx200_gphy_reset {
+struct ltq_gphy_reset {
 	u32 rd;
 	u32 addr;
-} xrx200_gphy[] = {
+};
+
+/* reset / boot a gphy */
+static struct ltq_gphy_reset xrx200_gphy[] = {
 	{RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200},
 	{RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200},
 };
 
+/* reset / boot a gphy */
+static struct ltq_gphy_reset xrx300_gphy[] = {
+	{RCU_RD_GPHY0_XRX300, RCU_GFS_ADD0_XRX300},
+	{RCU_RD_GPHY1_XRX300, RCU_GFS_ADD1_XRX300},
+	{RCU_RD_GPHY2_XRX300, RCU_GFS_ADD2_XRX300},
+};
+
+/* reset / boot a gphy */
+static struct ltq_gphy_reset xrx330_gphy[] = {
+	{RCU_RD_GPHY0_XRX330, RCU_GFS_ADD0_XRX330},
+	{RCU_RD_GPHY1_XRX330, RCU_GFS_ADD1_XRX330},
+	{RCU_RD_GPHY2_XRX330, RCU_GFS_ADD2_XRX330},
+	{RCU_RD_GPHY3_XRX330, RCU_GFS_ADD3_XRX330},
+};
+
+static void xrx200_gphy_boot_addr(struct ltq_gphy_reset *phy_regs,
+				  dma_addr_t dev_addr)
+{
+	ltq_rcu_w32_mask(0, phy_regs->rd, RCU_RST_REQ);
+	ltq_rcu_w32(dev_addr, phy_regs->addr);
+	ltq_rcu_w32_mask(phy_regs->rd, 0,  RCU_RST_REQ);
+}
+
 /* reset and boot a gphy. these phys only exist on xrx200 SoC */
 int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr)
 {
@@ -86,23 +182,34 @@ int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr)
 		return -EINVAL;
 	}
 
-	clk = clk_get_sys("1f203000.rcu", "gphy");
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	clk_enable(clk);
-
-	if (id > 1) {
-		dev_err(dev, "%u is an invalid gphy id\n", id);
-		return -EINVAL;
+	if (of_machine_is_compatible("lantiq,vr9")) {
+		clk = clk_get_sys("1f203000.rcu", "gphy");
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
+		clk_enable(clk);
 	}
+
 	dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr);
 
-	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd,
-			RCU_RST_REQ);
-	ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr);
-	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd,
-			RCU_RST_REQ);
+	if (of_machine_is_compatible("lantiq,vr9")) {
+		if (id >= ARRAY_SIZE(xrx200_gphy)) {
+			dev_err(dev, "%u is an invalid gphy id\n", id);
+			return -EINVAL;
+		}
+		xrx200_gphy_boot_addr(&xrx200_gphy[id], dev_addr);
+	} else if (of_machine_is_compatible("lantiq,ar10")) {
+		if (id >= ARRAY_SIZE(xrx300_gphy)) {
+			dev_err(dev, "%u is an invalid gphy id\n", id);
+			return -EINVAL;
+		}
+		xrx200_gphy_boot_addr(&xrx300_gphy[id], dev_addr);
+	} else if (of_machine_is_compatible("lantiq,grx390")) {
+		if (id >= ARRAY_SIZE(xrx330_gphy)) {
+			dev_err(dev, "%u is an invalid gphy id\n", id);
+			return -EINVAL;
+		}
+		xrx200_gphy_boot_addr(&xrx330_gphy[id], dev_addr);
+	}
 	return 0;
 }
 
@@ -200,6 +307,45 @@ static void ltq_machine_power_off(void)
 	unreachable();
 }
 
+static void ltq_usb_init(void)
+{
+	/* Power for USB cores 1 & 2 */
+	ltq_pmu_enable(PMU_AHBM);
+	ltq_pmu_enable(PMU_USB0);
+	ltq_pmu_enable(PMU_USB1);
+
+	ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B);
+
+	/* Enable USB PHY power for cores 1 & 2 */
+	ltq_pmu_enable(PMU_USB0_P);
+	ltq_pmu_enable(PMU_USB1_P);
+
+	/* Configure cores to host mode */
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
+		RCU_USB1CFG);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
+		RCU_USB2CFG);
+
+	/* Select DMA endianness (Host-endian: big-endian) */
+	ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
+		| RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
+	ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
+		| RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
+
+	/* Hard reset USB state machines */
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
+	udelay(50 * 1000);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
+
+	/* Soft reset USB state machines */
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
+		| USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
+	udelay(50 * 1000);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
+		& ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
+}
+
 static int __init mips_reboot_setup(void)
 {
 	struct resource res;
@@ -216,13 +362,21 @@ static int __init mips_reboot_setup(void)
 	if (of_address_to_resource(ltq_rcu_np, 0, &res))
 		panic("Failed to get rcu memory range");
 
-	if (request_mem_region(res.start, resource_size(&res), res.name) < 0)
+	if (!request_mem_region(res.start, resource_size(&res), res.name))
 		pr_err("Failed to request rcu memory");
 
 	ltq_rcu_membase = ioremap_nocache(res.start, resource_size(&res));
 	if (!ltq_rcu_membase)
 		panic("Failed to remap core memory");
 
+	if (of_machine_is_compatible("lantiq,ar9") ||
+	    of_machine_is_compatible("lantiq,vr9"))
+		ltq_usb_init();
+
+	if (of_machine_is_compatible("lantiq,vr9"))
+		ltq_rcu_w32(ltq_rcu_r32(RCU_AHB_ENDIAN) | RCU_VR9_BE_AHB1S,
+			    RCU_AHB_ENDIAN);
+
 	_machine_restart = ltq_machine_restart;
 	_machine_halt = ltq_machine_halt;
 	pm_power_off = ltq_machine_power_off;
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 2b15491de..80554e8f6 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -4,11 +4,13 @@
  *  by the Free Software Foundation.
  *
  *  Copyright (C) 2011-2012 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
  */
 
 #include <linux/ioport.h>
 #include <linux/export.h>
 #include <linux/clkdev.h>
+#include <linux/spinlock.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
@@ -18,16 +20,18 @@
 #include "../clk.h"
 #include "../prom.h"
 
-/* clock control register */
+/* clock control register for legacy */
 #define CGU_IFCCR	0x0018
 #define CGU_IFCCR_VR9	0x0024
-/* system clock register */
+/* system clock register for legacy */
 #define CGU_SYS		0x0010
 /* pci control register */
 #define CGU_PCICR	0x0034
 #define CGU_PCICR_VR9	0x0038
 /* ephy configuration register */
 #define CGU_EPHY	0x10
+
+/* Legacy PMU register for ar9, ase, danube */
 /* power control register */
 #define PMU_PWDCR	0x1C
 /* power status register */
@@ -41,13 +45,56 @@
 /* power status register */
 #define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR))
 
+
+/* PMU register for ar10 and grx390 */
+
+/* First register set */
+#define PMU_CLK_SR	0x20 /* status */
+#define PMU_CLK_CR_A	0x24 /* Enable */
+#define PMU_CLK_CR_B	0x28 /* Disable */
+/* Second register set */
+#define PMU_CLK_SR1	0x30 /* status */
+#define PMU_CLK_CR1_A	0x34 /* Enable */
+#define PMU_CLK_CR1_B	0x38 /* Disable */
+/* Third register set */
+#define PMU_ANA_SR	0x40 /* status */
+#define PMU_ANA_CR_A	0x44 /* Enable */
+#define PMU_ANA_CR_B	0x48 /* Disable */
+
+/* Status */
+static u32 pmu_clk_sr[] = {
+	PMU_CLK_SR,
+	PMU_CLK_SR1,
+	PMU_ANA_SR,
+};
+
+/* Enable */
+static u32 pmu_clk_cr_a[] = {
+	PMU_CLK_CR_A,
+	PMU_CLK_CR1_A,
+	PMU_ANA_CR_A,
+};
+
+/* Disable */
+static u32 pmu_clk_cr_b[] = {
+	PMU_CLK_CR_B,
+	PMU_CLK_CR1_B,
+	PMU_ANA_CR_B,
+};
+
+#define PWDCR_EN_XRX(x)		(pmu_clk_cr_a[(x)])
+#define PWDCR_DIS_XRX(x)	(pmu_clk_cr_b[(x)])
+#define PWDSR_XRX(x)		(pmu_clk_sr[(x)])
+
 /* clock gates that we can en/disable */
 #define PMU_USB0_P	BIT(0)
+#define PMU_ASE_SDIO	BIT(2) /* ASE special */
 #define PMU_PCI		BIT(4)
 #define PMU_DMA		BIT(5)
 #define PMU_USB0	BIT(6)
 #define PMU_ASC0	BIT(7)
 #define PMU_EPHY	BIT(7)	/* ase */
+#define PMU_USIF	BIT(7) /* from vr9 until grx390 */
 #define PMU_SPI		BIT(8)
 #define PMU_DFE		BIT(9)
 #define PMU_EBU		BIT(10)
@@ -56,12 +103,15 @@
 #define PMU_AHBS	BIT(13) /* vr9 */
 #define PMU_FPI		BIT(14)
 #define PMU_AHBM	BIT(15)
+#define PMU_SDIO	BIT(16) /* danube, ar9, vr9 */
 #define PMU_ASC1	BIT(17)
 #define PMU_PPE_QSB	BIT(18)
 #define PMU_PPE_SLL01	BIT(19)
+#define PMU_DEU		BIT(20)
 #define PMU_PPE_TC	BIT(21)
 #define PMU_PPE_EMA	BIT(22)
 #define PMU_PPE_DPLUM	BIT(23)
+#define PMU_PPE_DP	BIT(23)
 #define PMU_PPE_DPLUS	BIT(24)
 #define PMU_USB1_P	BIT(26)
 #define PMU_USB1	BIT(27)
@@ -70,30 +120,59 @@
 #define PMU_GPHY	BIT(30)
 #define PMU_PCIE_CLK	BIT(31)
 
-#define PMU1_PCIE_PHY	BIT(0)
+#define PMU1_PCIE_PHY	BIT(0)	/* vr9-specific,moved in ar10/grx390 */
 #define PMU1_PCIE_CTL	BIT(1)
 #define PMU1_PCIE_PDI	BIT(4)
 #define PMU1_PCIE_MSI	BIT(5)
+#define PMU1_CKE	BIT(6)
+#define PMU1_PCIE1_CTL	BIT(17)
+#define PMU1_PCIE1_PDI	BIT(20)
+#define PMU1_PCIE1_MSI	BIT(21)
+#define PMU1_PCIE2_CTL	BIT(25)
+#define PMU1_PCIE2_PDI	BIT(26)
+#define PMU1_PCIE2_MSI	BIT(27)
+
+#define PMU_ANALOG_USB0_P	BIT(0)
+#define PMU_ANALOG_USB1_P	BIT(1)
+#define PMU_ANALOG_PCIE0_P	BIT(8)
+#define PMU_ANALOG_PCIE1_P	BIT(9)
+#define PMU_ANALOG_PCIE2_P	BIT(10)
+#define PMU_ANALOG_DSL_AFE	BIT(16)
+#define PMU_ANALOG_DCDC_2V5	BIT(17)
+#define PMU_ANALOG_DCDC_1VX	BIT(18)
+#define PMU_ANALOG_DCDC_1V0	BIT(19)
 
 #define pmu_w32(x, y)	ltq_w32((x), pmu_membase + (y))
 #define pmu_r32(x)	ltq_r32(pmu_membase + (x))
 
+#define XBAR_ALWAYS_LAST	0x430
+#define XBAR_FPI_BURST_EN	BIT(1)
+#define XBAR_AHB_BURST_EN	BIT(2)
+
+#define xbar_w32(x, y)	ltq_w32((x), ltq_xbar_membase + (y))
+#define xbar_r32(x)	ltq_r32(ltq_xbar_membase + (x))
+
 static void __iomem *pmu_membase;
+static void __iomem *ltq_xbar_membase;
 void __iomem *ltq_cgu_membase;
 void __iomem *ltq_ebu_membase;
 
 static u32 ifccr = CGU_IFCCR;
 static u32 pcicr = CGU_PCICR;
 
+static DEFINE_SPINLOCK(g_pmu_lock);
+
 /* legacy function kept alive to ease clkdev transition */
 void ltq_pmu_enable(unsigned int module)
 {
-	int err = 1000000;
+	int retry = 1000000;
 
+	spin_lock(&g_pmu_lock);
 	pmu_w32(pmu_r32(PMU_PWDCR) & ~module, PMU_PWDCR);
-	do {} while (--err && (pmu_r32(PMU_PWDSR) & module));
+	do {} while (--retry && (pmu_r32(PMU_PWDSR) & module));
+	spin_unlock(&g_pmu_lock);
 
-	if (!err)
+	if (!retry)
 		panic("activating PMU module failed!");
 }
 EXPORT_SYMBOL(ltq_pmu_enable);
@@ -101,7 +180,15 @@ EXPORT_SYMBOL(ltq_pmu_enable);
 /* legacy function kept alive to ease clkdev transition */
 void ltq_pmu_disable(unsigned int module)
 {
+	int retry = 1000000;
+
+	spin_lock(&g_pmu_lock);
 	pmu_w32(pmu_r32(PMU_PWDCR) | module, PMU_PWDCR);
+	do {} while (--retry && (!(pmu_r32(PMU_PWDSR) & module)));
+	spin_unlock(&g_pmu_lock);
+
+	if (!retry)
+		pr_warn("deactivating PMU module failed!");
 }
 EXPORT_SYMBOL(ltq_pmu_disable);
 
@@ -123,9 +210,20 @@ static int pmu_enable(struct clk *clk)
 {
 	int retry = 1000000;
 
-	pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits,
-		PWDCR(clk->module));
-	do {} while (--retry && (pmu_r32(PWDSR(clk->module)) & clk->bits));
+	if (of_machine_is_compatible("lantiq,ar10")
+	    || of_machine_is_compatible("lantiq,grx390")) {
+		pmu_w32(clk->bits, PWDCR_EN_XRX(clk->module));
+		do {} while (--retry &&
+			     (!(pmu_r32(PWDSR_XRX(clk->module)) & clk->bits)));
+
+	} else {
+		spin_lock(&g_pmu_lock);
+		pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits,
+				PWDCR(clk->module));
+		do {} while (--retry &&
+			     (pmu_r32(PWDSR(clk->module)) & clk->bits));
+		spin_unlock(&g_pmu_lock);
+	}
 
 	if (!retry)
 		panic("activating PMU module failed!");
@@ -136,8 +234,24 @@ static int pmu_enable(struct clk *clk)
 /* disable a clock gate */
 static void pmu_disable(struct clk *clk)
 {
-	pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits,
-		PWDCR(clk->module));
+	int retry = 1000000;
+
+	if (of_machine_is_compatible("lantiq,ar10")
+	    || of_machine_is_compatible("lantiq,grx390")) {
+		pmu_w32(clk->bits, PWDCR_DIS_XRX(clk->module));
+		do {} while (--retry &&
+			     (pmu_r32(PWDSR_XRX(clk->module)) & clk->bits));
+	} else {
+		spin_lock(&g_pmu_lock);
+		pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits,
+				PWDCR(clk->module));
+		do {} while (--retry &&
+			     (!(pmu_r32(PWDSR(clk->module)) & clk->bits)));
+		spin_unlock(&g_pmu_lock);
+	}
+
+	if (!retry)
+		pr_warn("deactivating PMU module failed!");
 }
 
 /* the pci enable helper */
@@ -179,6 +293,16 @@ static void pci_ext_disable(struct clk *clk)
 	ltq_cgu_w32((1 << 31) | (1 << 30), pcicr);
 }
 
+static void xbar_fpi_burst_disable(void)
+{
+	u32 reg;
+
+	/* bit 1 as 1 --burst; bit 1 as 0 -- single */
+	reg = xbar_r32(XBAR_ALWAYS_LAST);
+	reg &= ~XBAR_FPI_BURST_EN;
+	xbar_w32(reg, XBAR_ALWAYS_LAST);
+}
+
 /* enable a clockout source */
 static int clkout_enable(struct clk *clk)
 {
@@ -202,8 +326,8 @@ static int clkout_enable(struct clk *clk)
 }
 
 /* manage the clock gates via PMU */
-static void clkdev_add_pmu(const char *dev, const char *con,
-					unsigned int module, unsigned int bits)
+static void clkdev_add_pmu(const char *dev, const char *con, bool deactivate,
+			   unsigned int module, unsigned int bits)
 {
 	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
 
@@ -214,6 +338,13 @@ static void clkdev_add_pmu(const char *dev, const char *con,
 	clk->disable = pmu_disable;
 	clk->module = module;
 	clk->bits = bits;
+	if (deactivate) {
+		/*
+		 * Disable it during the initialization. Module should enable
+		 * when used
+		 */
+		pmu_disable(clk);
+	}
 	clkdev_add(&clk->cl);
 }
 
@@ -312,12 +443,12 @@ void __init ltq_soc_init(void)
 			of_address_to_resource(np_ebu, 0, &res_ebu))
 		panic("Failed to get core resources");
 
-	if ((request_mem_region(res_pmu.start, resource_size(&res_pmu),
-				res_pmu.name) < 0) ||
-		(request_mem_region(res_cgu.start, resource_size(&res_cgu),
-				res_cgu.name) < 0) ||
-		(request_mem_region(res_ebu.start, resource_size(&res_ebu),
-				res_ebu.name) < 0))
+	if (!request_mem_region(res_pmu.start, resource_size(&res_pmu),
+				res_pmu.name) ||
+		!request_mem_region(res_cgu.start, resource_size(&res_cgu),
+				res_cgu.name) ||
+		!request_mem_region(res_ebu.start, resource_size(&res_ebu),
+				res_ebu.name))
 		pr_err("Failed to request core resources");
 
 	pmu_membase = ioremap_nocache(res_pmu.start, resource_size(&res_pmu));
@@ -328,17 +459,37 @@ void __init ltq_soc_init(void)
 	if (!pmu_membase || !ltq_cgu_membase || !ltq_ebu_membase)
 		panic("Failed to remap core resources");
 
+	if (of_machine_is_compatible("lantiq,vr9")) {
+		struct resource res_xbar;
+		struct device_node *np_xbar =
+				of_find_compatible_node(NULL, NULL,
+							"lantiq,xbar-xway");
+
+		if (!np_xbar)
+			panic("Failed to load xbar nodes from devicetree");
+		if (of_address_to_resource(np_pmu, 0, &res_xbar))
+			panic("Failed to get xbar resources");
+		if (request_mem_region(res_xbar.start, resource_size(&res_xbar),
+			res_xbar.name) < 0)
+			panic("Failed to get xbar resources");
+
+		ltq_xbar_membase = ioremap_nocache(res_xbar.start,
+						   resource_size(&res_xbar));
+		if (!ltq_xbar_membase)
+			panic("Failed to remap xbar resources");
+	}
+
 	/* make sure to unprotect the memory region where flash is located */
 	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
 
 	/* add our generic xway clocks */
-	clkdev_add_pmu("10000000.fpi", NULL, 0, PMU_FPI);
-	clkdev_add_pmu("1e100400.serial", NULL, 0, PMU_ASC0);
-	clkdev_add_pmu("1e100a00.gptu", NULL, 0, PMU_GPT);
-	clkdev_add_pmu("1e100bb0.stp", NULL, 0, PMU_STP);
-	clkdev_add_pmu("1e104100.dma", NULL, 0, PMU_DMA);
-	clkdev_add_pmu("1e100800.spi", NULL, 0, PMU_SPI);
-	clkdev_add_pmu("1e105300.ebu", NULL, 0, PMU_EBU);
+	clkdev_add_pmu("10000000.fpi", NULL, 0, 0, PMU_FPI);
+	clkdev_add_pmu("1e100400.serial", NULL, 0, 0, PMU_ASC0);
+	clkdev_add_pmu("1e100a00.gptu", NULL, 1, 0, PMU_GPT);
+	clkdev_add_pmu("1e100bb0.stp", NULL, 1, 0, PMU_STP);
+	clkdev_add_pmu("1e104100.dma", NULL, 1, 0, PMU_DMA);
+	clkdev_add_pmu("1e100800.spi", NULL, 1, 0, PMU_SPI);
+	clkdev_add_pmu("1e105300.ebu", NULL, 0, 0, PMU_EBU);
 	clkdev_add_clkout();
 
 	/* add the soc dependent clocks */
@@ -346,14 +497,30 @@ void __init ltq_soc_init(void)
 		ifccr = CGU_IFCCR_VR9;
 		pcicr = CGU_PCICR_VR9;
 	} else {
-		clkdev_add_pmu("1e180000.etop", NULL, 0, PMU_PPE);
+		clkdev_add_pmu("1e180000.etop", NULL, 1, 0, PMU_PPE);
 	}
 
 	if (!of_machine_is_compatible("lantiq,ase")) {
-		clkdev_add_pmu("1e100c00.serial", NULL, 0, PMU_ASC1);
+		clkdev_add_pmu("1e100c00.serial", NULL, 0, 0, PMU_ASC1);
 		clkdev_add_pci();
 	}
 
+	if (of_machine_is_compatible("lantiq,grx390") ||
+	    of_machine_is_compatible("lantiq,ar10")) {
+		clkdev_add_pmu("1e101000.usb", "phy", 1, 2, PMU_ANALOG_USB0_P);
+		clkdev_add_pmu("1e106000.usb", "phy", 1, 2, PMU_ANALOG_USB1_P);
+		/* rc 0 */
+		clkdev_add_pmu("1d900000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE0_P);
+		clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
+		clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI);
+		clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
+		/* rc 1 */
+		clkdev_add_pmu("19000000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE1_P);
+		clkdev_add_pmu("19000000.pcie", "msi", 1, 1, PMU1_PCIE1_MSI);
+		clkdev_add_pmu("19000000.pcie", "pdi", 1, 1, PMU1_PCIE1_PDI);
+		clkdev_add_pmu("19000000.pcie", "ctl", 1, 1, PMU1_PCIE1_CTL);
+	}
+
 	if (of_machine_is_compatible("lantiq,ase")) {
 		if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
 			clkdev_add_static(CLOCK_266M, CLOCK_133M,
@@ -361,28 +528,84 @@ void __init ltq_soc_init(void)
 		else
 			clkdev_add_static(CLOCK_133M, CLOCK_133M,
 						CLOCK_133M, CLOCK_133M);
-		clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY),
-		clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY);
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+		clkdev_add_pmu("1e180000.etop", "ppe", 1, 0, PMU_PPE);
+		clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY);
+		clkdev_add_pmu("1e180000.etop", "ephy", 1, 0, PMU_EPHY);
+		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_ASE_SDIO);
+		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+	} else if (of_machine_is_compatible("lantiq,grx390")) {
+		clkdev_add_static(ltq_grx390_cpu_hz(), ltq_grx390_fpi_hz(),
+				  ltq_grx390_fpi_hz(), ltq_grx390_pp32_hz());
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1);
+		/* rc 2 */
+		clkdev_add_pmu("1a800000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P);
+		clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI);
+		clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
+		clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL);
+		clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | PMU_PPE_DP);
+		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+	} else if (of_machine_is_compatible("lantiq,ar10")) {
+		clkdev_add_static(ltq_ar10_cpu_hz(), ltq_ar10_fpi_hz(),
+				  ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz());
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1);
+		clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH |
+			       PMU_PPE_DP | PMU_PPE_TC);
+		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+		clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY);
+		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+		clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE);
+		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
 	} else if (of_machine_is_compatible("lantiq,vr9")) {
 		clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
 				ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz());
-		clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY);
-		clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK);
-		clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI);
-		clkdev_add_pmu("1d900000.pcie", "pdi", 1, PMU1_PCIE_PDI);
-		clkdev_add_pmu("1d900000.pcie", "ctl", 1, PMU1_PCIE_CTL);
-		clkdev_add_pmu("1d900000.pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
-		clkdev_add_pmu("1e108000.eth", NULL, 0,
+		clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0 | PMU_AHBM);
+		clkdev_add_pmu("1e106000.usb", "phy", 1, 0, PMU_USB1_P);
+		clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1 | PMU_AHBM);
+		clkdev_add_pmu("1d900000.pcie", "phy", 1, 1, PMU1_PCIE_PHY);
+		clkdev_add_pmu("1d900000.pcie", "bus", 1, 0, PMU_PCIE_CLK);
+		clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
+		clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI);
+		clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
+		clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS);
+
+		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+		clkdev_add_pmu("1e108000.eth", NULL, 1, 0,
 				PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
 				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
 				PMU_PPE_QSB | PMU_PPE_TOP);
-		clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
+		clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY);
+		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
+		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
 	} else if (of_machine_is_compatible("lantiq,ar9")) {
 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
 				ltq_ar9_fpi_hz(), CLOCK_250M);
-		clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH);
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+		clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1);
+		clkdev_add_pmu("1e106000.usb", "phy", 1, 0, PMU_USB1_P);
+		clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH);
+		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
+		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+		clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
 	} else {
 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
 				ltq_danube_fpi_hz(), ltq_danube_pp32_hz());
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
+		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+		clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
 	}
+
+	if (of_machine_is_compatible("lantiq,vr9"))
+		xbar_fpi_burst_disable();
 }
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 1e9e900cd..0344e575f 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -15,4 +15,4 @@ obj-$(CONFIG_CPU_R3000)		+= r3k_dump_tlb.o
 obj-$(CONFIG_CPU_TX39XX)	+= r3k_dump_tlb.o
 
 # libgcc-style stuff needed in the kernel
-obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
+obj-y += ashldi3.o ashrdi3.o bswapsi.o bswapdi.o cmpdi2.o lshrdi3.o ucmpdi2.o
diff --git a/arch/mips/lib/bswapdi.c b/arch/mips/lib/bswapdi.c
new file mode 100644
index 000000000..77e5f9c1f
--- /dev/null
+++ b/arch/mips/lib/bswapdi.c
@@ -0,0 +1,15 @@
+#include <linux/module.h>
+
+unsigned long long __bswapdi2(unsigned long long u)
+{
+	return (((u) & 0xff00000000000000ull) >> 56) |
+	       (((u) & 0x00ff000000000000ull) >> 40) |
+	       (((u) & 0x0000ff0000000000ull) >> 24) |
+	       (((u) & 0x000000ff00000000ull) >>  8) |
+	       (((u) & 0x00000000ff000000ull) <<  8) |
+	       (((u) & 0x0000000000ff0000ull) << 24) |
+	       (((u) & 0x000000000000ff00ull) << 40) |
+	       (((u) & 0x00000000000000ffull) << 56);
+}
+
+EXPORT_SYMBOL(__bswapdi2);
diff --git a/arch/mips/lib/bswapsi.c b/arch/mips/lib/bswapsi.c
new file mode 100644
index 000000000..2b302ff12
--- /dev/null
+++ b/arch/mips/lib/bswapsi.c
@@ -0,0 +1,11 @@
+#include <linux/module.h>
+
+unsigned int __bswapsi2(unsigned int u)
+{
+	return (((u) & 0xff000000) >> 24) |
+	       (((u) & 0x00ff0000) >>  8) |
+	       (((u) & 0x0000ff00) <<  8) |
+	       (((u) & 0x000000ff) << 24);
+}
+
+EXPORT_SYMBOL(__bswapsi2);
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
index b8e63fd00..8f0019a2e 100644
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -283,6 +283,8 @@ LEAF(memset)
 1:
 #ifndef CONFIG_EVA
 FEXPORT(__bzero)
+#else
+FEXPORT(__bzero_kernel)
 #endif
 	__BUILD_BZERO LEGACY_MODE
 
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index 497912b38..8e6e29267 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -120,11 +120,6 @@ config RS780_HPET
 
 	  If unsure, say Yes.
 
-config LOONGSON_SUSPEND
-	bool
-	default y
-	depends on CPU_SUPPORTS_CPUFREQ && SUSPEND
-
 config LOONGSON_UART_BASE
 	bool
 	default y
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index f2e8153e4..074d9cb15 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_CS5536) += cs5536/
 # Suspend Support
 #
 
-obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
+obj-$(CONFIG_SUSPEND) += pm.o
 
 #
 # Big Memory (SWIOTLB) Support
diff --git a/arch/mips/loongson64/lemote-2f/Makefile b/arch/mips/loongson64/lemote-2f/Makefile
index 4f9eaa328..08b8abcbf 100644
--- a/arch/mips/loongson64/lemote-2f/Makefile
+++ b/arch/mips/loongson64/lemote-2f/Makefile
@@ -8,4 +8,4 @@ obj-y += clock.o machtype.o irq.o reset.o ec_kb3310b.o
 # Suspend Support
 #
 
-obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
+obj-$(CONFIG_SUSPEND) += pm.o
diff --git a/arch/mips/math-emu/me-debugfs.c b/arch/mips/math-emu/me-debugfs.c
index 506a67a98..be650ed7d 100644
--- a/arch/mips/math-emu/me-debugfs.c
+++ b/arch/mips/math-emu/me-debugfs.c
@@ -4,6 +4,7 @@
 #include <linux/init.h>
 #include <linux/percpu.h>
 #include <linux/types.h>
+#include <asm/debug.h>
 #include <asm/fpu_emulator.h>
 #include <asm/local.h>
 
@@ -27,7 +28,6 @@ static int fpuemu_stat_get(void *data, u64 *val)
 }
 DEFINE_SIMPLE_ATTRIBUTE(fops_fpuemu_stat, fpuemu_stat_get, NULL, "%llu\n");
 
-extern struct dentry *mips_debugfs_dir;
 static int __init debugfs_fpuemu(void)
 {
 	struct dentry *d, *dir;
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 67ede4ef9..b4c64bd3f 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
 obj-$(CONFIG_R5000_CPU_SCACHE)	+= sc-r5k.o
 obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
 obj-$(CONFIG_MIPS_CPU_SCACHE)	+= sc-mips.o
+obj-$(CONFIG_SCACHE_DEBUGFS)	+= sc-debugfs.o
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index d8117be72..730d394ce 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -145,7 +145,7 @@ static void *mips_dma_alloc_coherent(struct device *dev, size_t size,
 
 	gfp = massage_gfp_flags(dev, gfp);
 
-	if (IS_ENABLED(CONFIG_DMA_CMA) && !(gfp & GFP_ATOMIC))
+	if (IS_ENABLED(CONFIG_DMA_CMA) && gfpflags_allow_blocking(gfp))
 		page = dma_alloc_from_contiguous(dev,
 					count, get_order(size));
 	if (!page)
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 11661cbc1..d7258a103 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -118,19 +118,6 @@ void *kmap_atomic_pfn(unsigned long pfn)
 	return (void*) vaddr;
 }
 
-struct page *kmap_atomic_to_page(void *ptr)
-{
-	unsigned long idx, vaddr = (unsigned long)ptr;
-	pte_t *pte;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	idx = virt_to_fix(vaddr);
-	pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
-	return pte_page(*pte);
-}
-
 void __init kmap_init(void)
 {
 	unsigned long kmap_vstart;
diff --git a/arch/mips/mm/sc-debugfs.c b/arch/mips/mm/sc-debugfs.c
new file mode 100644
index 000000000..5eefe3281
--- /dev/null
+++ b/arch/mips/mm/sc-debugfs.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bcache.h>
+#include <asm/debug.h>
+#include <asm/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/init.h>
+
+static ssize_t sc_prefetch_read(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	bool enabled = bc_prefetch_is_enabled();
+	char buf[3];
+
+	buf[0] = enabled ? 'Y' : 'N';
+	buf[1] = '\n';
+	buf[2] = 0;
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+}
+
+static ssize_t sc_prefetch_write(struct file *file,
+				 const char __user *user_buf,
+				 size_t count, loff_t *ppos)
+{
+	char buf[32];
+	ssize_t buf_size;
+	bool enabled;
+	int err;
+
+	buf_size = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	buf[buf_size] = '\0';
+	err = strtobool(buf, &enabled);
+	if (err)
+		return err;
+
+	if (enabled)
+		bc_prefetch_enable();
+	else
+		bc_prefetch_disable();
+
+	return count;
+}
+
+static const struct file_operations sc_prefetch_fops = {
+	.open = simple_open,
+	.llseek = default_llseek,
+	.read = sc_prefetch_read,
+	.write = sc_prefetch_write,
+};
+
+static int __init sc_debugfs_init(void)
+{
+	struct dentry *dir, *file;
+
+	if (!mips_debugfs_dir)
+		return -ENODEV;
+
+	dir = debugfs_create_dir("l2cache", mips_debugfs_dir);
+	if (IS_ERR(dir))
+		return PTR_ERR(dir);
+
+	file = debugfs_create_file("prefetch", S_IRUGO | S_IWUSR, dir,
+				   NULL, &sc_prefetch_fops);
+	if (IS_ERR(file))
+		return PTR_ERR(file);
+
+	return 0;
+}
+late_initcall(sc_debugfs_init);
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 53ea8391f..3bd0597d9 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -51,11 +51,69 @@ static void mips_sc_disable(void)
 	/* L2 cache is permanently enabled */
 }
 
+static void mips_sc_prefetch_enable(void)
+{
+	unsigned long pftctl;
+
+	if (mips_cm_revision() < CM_REV_CM2_5)
+		return;
+
+	/*
+	 * If there is one or more L2 prefetch unit present then enable
+	 * prefetching for both code & data, for all ports.
+	 */
+	pftctl = read_gcr_l2_pft_control();
+	if (pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK) {
+		pftctl &= ~CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK;
+		pftctl |= PAGE_MASK & CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK;
+		pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN_MSK;
+		write_gcr_l2_pft_control(pftctl);
+
+		pftctl = read_gcr_l2_pft_control_b();
+		pftctl |= CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK;
+		pftctl |= CM_GCR_L2_PFT_CONTROL_B_CEN_MSK;
+		write_gcr_l2_pft_control_b(pftctl);
+	}
+}
+
+static void mips_sc_prefetch_disable(void)
+{
+	unsigned long pftctl;
+
+	if (mips_cm_revision() < CM_REV_CM2_5)
+		return;
+
+	pftctl = read_gcr_l2_pft_control();
+	pftctl &= ~CM_GCR_L2_PFT_CONTROL_PFTEN_MSK;
+	write_gcr_l2_pft_control(pftctl);
+
+	pftctl = read_gcr_l2_pft_control_b();
+	pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK;
+	pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_CEN_MSK;
+	write_gcr_l2_pft_control_b(pftctl);
+}
+
+static bool mips_sc_prefetch_is_enabled(void)
+{
+	unsigned long pftctl;
+
+	if (mips_cm_revision() < CM_REV_CM2_5)
+		return false;
+
+	pftctl = read_gcr_l2_pft_control();
+	if (!(pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK))
+		return false;
+	return !!(pftctl & CM_GCR_L2_PFT_CONTROL_PFTEN_MSK);
+}
+
 static struct bcache_ops mips_sc_ops = {
 	.bc_enable = mips_sc_enable,
 	.bc_disable = mips_sc_disable,
 	.bc_wback_inv = mips_sc_wback_inv,
-	.bc_inv = mips_sc_inv
+	.bc_inv = mips_sc_inv,
+	.bc_prefetch_enable = mips_sc_prefetch_enable,
+	.bc_prefetch_disable = mips_sc_prefetch_disable,
+	.bc_prefetch_is_enabled = mips_sc_prefetch_is_enabled,
 };
 
 /*
@@ -162,13 +220,13 @@ static inline int __init mips_sc_probe(void)
 		return 0;
 
 	tmp = (config2 >> 8) & 0x0f;
-	if (0 <= tmp && tmp <= 7)
+	if (tmp <= 7)
 		c->scache.sets = 64 << tmp;
 	else
 		return 0;
 
 	tmp = (config2 >> 0) & 0x0f;
-	if (0 <= tmp && tmp <= 7)
+	if (tmp <= 7)
 		c->scache.ways = tmp + 1;
 	else
 		return 0;
@@ -186,6 +244,7 @@ int mips_sc_init(void)
 	int found = mips_sc_probe();
 	if (found) {
 		mips_sc_enable();
+		mips_sc_prefetch_enable();
 		bcops = &mips_sc_ops;
 	}
 	return found;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 323d1d302..32e0be276 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -311,6 +311,7 @@ static struct uasm_label labels[128];
 static struct uasm_reloc relocs[128];
 
 static int check_for_high_segbits;
+static bool fill_includes_sw_bits;
 
 static unsigned int kscratch_used_mask;
 
@@ -630,8 +631,14 @@ static void build_tlb_write_entry(u32 **p, struct uasm_label **l,
 static __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
 							unsigned int reg)
 {
-	if (cpu_has_rixi) {
-		UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
+	if (cpu_has_rixi && _PAGE_NO_EXEC) {
+		if (fill_includes_sw_bits) {
+			UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
+		} else {
+			UASM_i_SRL(p, reg, reg, ilog2(_PAGE_NO_EXEC));
+			UASM_i_ROTR(p, reg, reg,
+				    ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+		}
 	} else {
 #ifdef CONFIG_PHYS_ADDR_T_64BIT
 		uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL));
@@ -1005,21 +1012,7 @@ static void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep)
 	 * 64bit address support (36bit on a 32bit CPU) in a 32bit
 	 * Kernel is a special case. Only a few CPUs use it.
 	 */
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
-	if (cpu_has_64bits) {
-		uasm_i_ld(p, tmp, 0, ptep); /* get even pte */
-		uasm_i_ld(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
-		if (cpu_has_rixi) {
-			UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL));
-			UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
-			UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL));
-		} else {
-			uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
-			UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
-			uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
-		}
-		UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
-	} else {
+	if (config_enabled(CONFIG_PHYS_ADDR_T_64BIT) && !cpu_has_64bits) {
 		int pte_off_even = sizeof(pte_t) / 2;
 		int pte_off_odd = pte_off_even + sizeof(pte_t);
 #ifdef CONFIG_XPA
@@ -1043,31 +1036,23 @@ static void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep)
 		uasm_i_mthc0(p, tmp, C0_ENTRYLO0);
 		uasm_i_mthc0(p, ptep, C0_ENTRYLO1);
 #endif
+		return;
 	}
-#else
+
 	UASM_i_LW(p, tmp, 0, ptep); /* get even pte */
 	UASM_i_LW(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
 	if (r45k_bvahwbug())
 		build_tlb_probe_entry(p);
-	if (cpu_has_rixi) {
-		UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL));
-		if (r4k_250MHZhwbug())
-			UASM_i_MTC0(p, 0, C0_ENTRYLO0);
-		UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
-		UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL));
-	} else {
-		UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
-		if (r4k_250MHZhwbug())
-			UASM_i_MTC0(p, 0, C0_ENTRYLO0);
-		UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
-		UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
-		if (r45k_bvahwbug())
-			uasm_i_mfc0(p, tmp, C0_INDEX);
-	}
+	build_convert_pte_to_entrylo(p, tmp);
+	if (r4k_250MHZhwbug())
+		UASM_i_MTC0(p, 0, C0_ENTRYLO0);
+	UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
+	build_convert_pte_to_entrylo(p, ptep);
+	if (r45k_bvahwbug())
+		uasm_i_mfc0(p, tmp, C0_INDEX);
 	if (r4k_250MHZhwbug())
 		UASM_i_MTC0(p, 0, C0_ENTRYLO1);
 	UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
-#endif
 }
 
 struct mips_huge_tlb_info {
@@ -2299,6 +2284,10 @@ static void config_htw_params(void)
 	/* re-initialize the PTI field including the even/odd bit */
 	pwfield &= ~MIPS_PWFIELD_PTI_MASK;
 	pwfield |= PAGE_SHIFT << MIPS_PWFIELD_PTI_SHIFT;
+	if (CONFIG_PGTABLE_LEVELS >= 3) {
+		pwfield &= ~MIPS_PWFIELD_MDI_MASK;
+		pwfield |= PMD_SHIFT << MIPS_PWFIELD_MDI_SHIFT;
+	}
 	/* Set the PTEI right shift */
 	ptei = _PAGE_GLOBAL_SHIFT << MIPS_PWFIELD_PTEI_SHIFT;
 	pwfield |= ptei;
@@ -2320,9 +2309,11 @@ static void config_htw_params(void)
 
 	pwsize = ilog2(PTRS_PER_PGD) << MIPS_PWSIZE_GDW_SHIFT;
 	pwsize |= ilog2(PTRS_PER_PTE) << MIPS_PWSIZE_PTW_SHIFT;
+	if (CONFIG_PGTABLE_LEVELS >= 3)
+		pwsize |= ilog2(PTRS_PER_PMD) << MIPS_PWSIZE_MDW_SHIFT;
 
 	/* If XPA has been enabled, PTEs are 64-bit in size. */
-	if (read_c0_pagegrain() & PG_ELPA)
+	if (config_enabled(CONFIG_64BITS) || (read_c0_pagegrain() & PG_ELPA))
 		pwsize |= 1;
 
 	write_c0_pwsize(pwsize);
@@ -2360,6 +2351,41 @@ static void config_xpa_params(void)
 #endif
 }
 
+static void check_pabits(void)
+{
+	unsigned long entry;
+	unsigned pabits, fillbits;
+
+	if (!cpu_has_rixi || !_PAGE_NO_EXEC) {
+		/*
+		 * We'll only be making use of the fact that we can rotate bits
+		 * into the fill if the CPU supports RIXI, so don't bother
+		 * probing this for CPUs which don't.
+		 */
+		return;
+	}
+
+	write_c0_entrylo0(~0ul);
+	back_to_back_c0_hazard();
+	entry = read_c0_entrylo0();
+
+	/* clear all non-PFN bits */
+	entry &= ~((1 << MIPS_ENTRYLO_PFN_SHIFT) - 1);
+	entry &= ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI);
+
+	/* find a lower bound on PABITS, and upper bound on fill bits */
+	pabits = fls_long(entry) + 6;
+	fillbits = max_t(int, (int)BITS_PER_LONG - pabits, 0);
+
+	/* minus the RI & XI bits */
+	fillbits -= min_t(unsigned, fillbits, 2);
+
+	if (fillbits >= ilog2(_PAGE_NO_EXEC))
+		fill_includes_sw_bits = true;
+
+	pr_debug("Entry* registers contain %u fill bits\n", fillbits);
+}
+
 void build_tlb_refill_handler(void)
 {
 	/*
@@ -2370,6 +2396,7 @@ void build_tlb_refill_handler(void)
 	static int run_once = 0;
 
 	output_pgtable_bits_defines();
+	check_pabits();
 
 #ifdef CONFIG_64BIT
 	check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index ea35587a5..5827af77c 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -5,9 +5,18 @@
 # Copyright (C) 2008 Wind River Systems, Inc.
 #   written by Ralf Baechle <ralf@linux-mips.org>
 #
-obj-y				:= malta-display.o malta-dt.o malta-init.o \
-				   malta-int.o malta-memory.o malta-platform.o \
-				   malta-reset.o malta-setup.o malta-time.o
+obj-y				+= malta-display.o
+obj-y				+= malta-dt.o
+obj-y				+= malta-dtshim.o
+obj-y				+= malta-init.o
+obj-y				+= malta-int.o
+obj-y				+= malta-memory.o
+obj-y				+= malta-platform.o
+obj-y				+= malta-reset.o
+obj-y				+= malta-setup.o
+obj-y				+= malta-time.o
 
 obj-$(CONFIG_MIPS_CMP)		+= malta-amon.o
 obj-$(CONFIG_MIPS_MALTA_PM)	+= malta-pm.o
+
+CFLAGS_malta-dtshim.o = -I$(src)/../../../scripts/dtc/libfdt
diff --git a/arch/mips/mti-malta/malta-dtshim.c b/arch/mips/mti-malta/malta-dtshim.c
new file mode 100644
index 000000000..f7133efc5
--- /dev/null
+++ b/arch/mips/mti-malta/malta-dtshim.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/of_fdt.h>
+#include <linux/sizes.h>
+#include <asm/bootinfo.h>
+#include <asm/fw/fw.h>
+#include <asm/page.h>
+
+static unsigned char fdt_buf[16 << 10] __initdata;
+
+/* determined physical memory size, not overridden by command line args	 */
+extern unsigned long physical_memsize;
+
+#define MAX_MEM_ARRAY_ENTRIES 1
+
+static unsigned __init gen_fdt_mem_array(__be32 *mem_array, unsigned long size)
+{
+	unsigned long size_preio;
+	unsigned entries;
+
+	entries = 1;
+	mem_array[0] = cpu_to_be32(PHYS_OFFSET);
+	if (config_enabled(CONFIG_EVA)) {
+		/*
+		 * The current Malta EVA configuration is "special" in that it
+		 * always makes use of addresses in the upper half of the 32 bit
+		 * physical address map, which gives it a contiguous region of
+		 * DDR but limits it to 2GB.
+		 */
+		mem_array[1] = cpu_to_be32(size);
+	} else {
+		size_preio = min_t(unsigned long, size, SZ_256M);
+		mem_array[1] = cpu_to_be32(size_preio);
+	}
+
+	BUG_ON(entries > MAX_MEM_ARRAY_ENTRIES);
+	return entries;
+}
+
+static void __init append_memory(void *fdt, int root_off)
+{
+	__be32 mem_array[2 * MAX_MEM_ARRAY_ENTRIES];
+	unsigned long memsize;
+	unsigned mem_entries;
+	int i, err, mem_off;
+	char *var, param_name[10], *var_names[] = {
+		"ememsize", "memsize",
+	};
+
+	/* if a memory node already exists, leave it alone */
+	mem_off = fdt_path_offset(fdt, "/memory");
+	if (mem_off >= 0)
+		return;
+
+	/* find memory size from the bootloader environment */
+	for (i = 0; i < ARRAY_SIZE(var_names); i++) {
+		var = fw_getenv(var_names[i]);
+		if (!var)
+			continue;
+
+		err = kstrtoul(var, 0, &physical_memsize);
+		if (!err)
+			break;
+
+		pr_warn("Failed to read the '%s' env variable '%s'\n",
+			var_names[i], var);
+	}
+
+	if (!physical_memsize) {
+		pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
+		physical_memsize = 32 << 20;
+	}
+
+	if (config_enabled(CONFIG_CPU_BIG_ENDIAN)) {
+		/*
+		 * SOC-it swaps, or perhaps doesn't swap, when DMA'ing
+		 * the last word of physical memory.
+		 */
+		physical_memsize -= PAGE_SIZE;
+	}
+
+	/* default to using all available RAM */
+	memsize = physical_memsize;
+
+	/* allow the user to override the usable memory */
+	for (i = 0; i < ARRAY_SIZE(var_names); i++) {
+		snprintf(param_name, sizeof(param_name), "%s=", var_names[i]);
+		var = strstr(arcs_cmdline, param_name);
+		if (!var)
+			continue;
+
+		memsize = memparse(var + strlen(param_name), NULL);
+	}
+
+	/* if the user says there's more RAM than we thought, believe them */
+	physical_memsize = max_t(unsigned long, physical_memsize, memsize);
+
+	/* append memory to the DT */
+	mem_off = fdt_add_subnode(fdt, root_off, "memory");
+	if (mem_off < 0)
+		panic("Unable to add memory node to DT: %d", mem_off);
+
+	err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
+	if (err)
+		panic("Unable to set memory node device_type: %d", err);
+
+	mem_entries = gen_fdt_mem_array(mem_array, physical_memsize);
+	err = fdt_setprop(fdt, mem_off, "reg", mem_array,
+			  mem_entries * 2 * sizeof(mem_array[0]));
+	if (err)
+		panic("Unable to set memory regs property: %d", err);
+
+	mem_entries = gen_fdt_mem_array(mem_array, memsize);
+	err = fdt_setprop(fdt, mem_off, "linux,usable-memory", mem_array,
+			  mem_entries * 2 * sizeof(mem_array[0]));
+	if (err)
+		panic("Unable to set linux,usable-memory property: %d", err);
+}
+
+void __init *malta_dt_shim(void *fdt)
+{
+	int root_off, len, err;
+	const char *compat;
+
+	if (fdt_check_header(fdt))
+		panic("Corrupt DT");
+
+	err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
+	if (err)
+		panic("Unable to open FDT: %d", err);
+
+	root_off = fdt_path_offset(fdt_buf, "/");
+	if (root_off < 0)
+		panic("No / node in DT");
+
+	compat = fdt_getprop(fdt_buf, root_off, "compatible", &len);
+	if (!compat)
+		panic("No root compatible property in DT: %d", len);
+
+	/* if this isn't Malta, leave the DT alone */
+	if (strncmp(compat, "mti,malta", len))
+		return fdt;
+
+	append_memory(fdt_buf, root_off);
+
+	err = fdt_pack(fdt_buf);
+	if (err)
+		panic("Unable to pack FDT: %d\n", err);
+
+	return fdt_buf;
+}
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 53c24784a..571148c5f 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -302,6 +302,7 @@ mips_pci_controller:
 		return;
 	if (!register_vsmp_smp_ops())
 		return;
+	register_up_smp_ops();
 }
 
 void platform_early_l2_init(void)
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
index dadeb8379..d5f8dae6a 100644
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -21,147 +21,20 @@
 #include <asm/sections.h>
 #include <asm/fw/fw.h>
 
-static fw_memblock_t mdesc[FW_MAX_MEMBLOCKS];
-
 /* determined physical memory size, not overridden by command line args	 */
 unsigned long physical_memsize = 0L;
 
-fw_memblock_t * __init fw_getmdesc(int eva)
-{
-	char *memsize_str, *ememsize_str = NULL, *ptr;
-	unsigned long memsize = 0, ememsize = 0;
-	static char cmdline[COMMAND_LINE_SIZE] __initdata;
-	int tmp;
-
-	/* otherwise look in the environment */
-
-	memsize_str = fw_getenv("memsize");
-	if (memsize_str) {
-		tmp = kstrtoul(memsize_str, 0, &memsize);
-		if (tmp)
-			pr_warn("Failed to read the 'memsize' env variable.\n");
-	}
-	if (eva) {
-	/* Look for ememsize for EVA */
-		ememsize_str = fw_getenv("ememsize");
-		if (ememsize_str) {
-			tmp = kstrtoul(ememsize_str, 0, &ememsize);
-			if (tmp)
-				pr_warn("Failed to read the 'ememsize' env variable.\n");
-		}
-	}
-	if (!memsize && !ememsize) {
-		pr_warn("memsize not set in YAMON, set to default (32Mb)\n");
-		physical_memsize = 0x02000000;
-	} else {
-		if (memsize > (256 << 20)) { /* memsize should be capped to 256M */
-			pr_warn("Unsupported memsize value (0x%lx) detected! "
-				"Using 0x10000000 (256M) instead\n",
-				memsize);
-			memsize = 256 << 20;
-		}
-		/* If ememsize is set, then set physical_memsize to that */
-		physical_memsize = ememsize ? : memsize;
-	}
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	/* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
-	   word of physical memory */
-	physical_memsize -= PAGE_SIZE;
-#endif
-
-	/* Check the command line for a memsize directive that overrides
-	   the physical/default amount */
-	strcpy(cmdline, arcs_cmdline);
-	ptr = strstr(cmdline, "memsize=");
-	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
-		ptr = strstr(ptr, " memsize=");
-	/* And now look for ememsize */
-	if (eva) {
-		ptr = strstr(cmdline, "ememsize=");
-		if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
-			ptr = strstr(ptr, " ememsize=");
-	}
-
-	if (ptr)
-		memsize = memparse(ptr + 8 + (eva ? 1 : 0), &ptr);
-	else
-		memsize = physical_memsize;
-
-	/* Last 64K for HIGHMEM arithmetics */
-	if (memsize > 0x7fff0000)
-		memsize = 0x7fff0000;
-
-	memset(mdesc, 0, sizeof(mdesc));
-
-	mdesc[0].type = fw_dontuse;
-	mdesc[0].base = PHYS_OFFSET;
-	mdesc[0].size = 0x00001000;
-
-	mdesc[1].type = fw_code;
-	mdesc[1].base = mdesc[0].base + 0x00001000UL;
-	mdesc[1].size = 0x000ef000;
-
-	/*
-	 * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the
-	 * south bridge and PCI access always forwarded to the ISA Bus and
-	 * BIOSCS# is always generated.
-	 * This mean that this area can't be used as DMA memory for PCI
-	 * devices.
-	 */
-	mdesc[2].type = fw_dontuse;
-	mdesc[2].base = mdesc[0].base + 0x000f0000UL;
-	mdesc[2].size = 0x00010000;
-
-	mdesc[3].type = fw_dontuse;
-	mdesc[3].base = mdesc[0].base + 0x00100000UL;
-	mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) -
-		0x00100000UL;
-
-	mdesc[4].type = fw_free;
-	mdesc[4].base = mdesc[0].base + CPHYSADDR(PFN_ALIGN(&_end));
-	mdesc[4].size = memsize - CPHYSADDR(mdesc[4].base);
-
-	return &mdesc[0];
-}
-
 static void free_init_pages_eva_malta(void *begin, void *end)
 {
 	free_init_pages("unused kernel", __pa_symbol((unsigned long *)begin),
 			__pa_symbol((unsigned long *)end));
 }
 
-static int __init fw_memtype_classify(unsigned int type)
-{
-	switch (type) {
-	case fw_free:
-		return BOOT_MEM_RAM;
-	case fw_code:
-		return BOOT_MEM_ROM_DATA;
-	default:
-		return BOOT_MEM_RESERVED;
-	}
-}
-
 void __init fw_meminit(void)
 {
-	fw_memblock_t *p;
-
-	p = fw_getmdesc(config_enabled(CONFIG_EVA));
-	free_init_pages_eva = (config_enabled(CONFIG_EVA) ?
-			       free_init_pages_eva_malta : NULL);
+	bool eva = config_enabled(CONFIG_EVA);
 
-	while (p->size) {
-		long type;
-		unsigned long base, size;
-
-		type = fw_memtype_classify(p->type);
-		base = p->base;
-		size = p->size;
-
-		add_memory_region(base, size, type);
-		p++;
-	}
+	free_init_pages_eva = eva ? free_init_pages_eva_malta : NULL;
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index 9d1e7f5ec..4740c82fb 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -27,6 +27,7 @@
 #include <linux/time.h>
 
 #include <asm/fw/fw.h>
+#include <asm/mach-malta/malta-dtshim.h>
 #include <asm/mips-cm.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/malta.h>
@@ -250,8 +251,10 @@ static void __init bonito_quirks_setup(void)
 void __init plat_mem_setup(void)
 {
 	unsigned int i;
+	void *fdt = __dtb_start;
 
-	__dt_setup_arch(__dtb_start);
+	fdt = malta_dt_shim(fdt);
+	__dt_setup_arch(fdt);
 
 	if (config_enabled(CONFIG_EVA))
 		/* EVA has already been configured in mach-malta/kernel-init.h */
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index 2e52cbd20..7a584e0bf 100644
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -12,6 +12,4 @@ obj-y				:= sead3-lcd.o sead3-display.o sead3-init.o \
 				   sead3-int.o sead3-platform.o sead3-reset.o \
 				   sead3-setup.o sead3-time.o
 
-obj-y				+= leds-sead3.o
-
 obj-$(CONFIG_EARLY_PRINTK)	+= sead3-console.o
diff --git a/arch/mips/mti-sead3/leds-sead3.c b/arch/mips/mti-sead3/leds-sead3.c
deleted file mode 100644
index c938ceeb8..000000000
--- a/arch/mips/mti-sead3/leds-sead3.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2015 Imagination Technologies, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mips-boards/sead3-addr.h>
-
-static void sead3_pled_set(struct led_classdev *led_cdev,
-		enum led_brightness value)
-{
-	writel(value, (void __iomem *)SEAD3_CPLD_P_LED);
-}
-
-static void sead3_fled_set(struct led_classdev *led_cdev,
-		enum led_brightness value)
-{
-	writel(value, (void __iomem *)SEAD3_CPLD_F_LED);
-}
-
-static struct led_classdev sead3_pled = {
-	.name		= "sead3::pled",
-	.brightness_set = sead3_pled_set,
-	.flags		= LED_CORE_SUSPENDRESUME,
-};
-
-static struct led_classdev sead3_fled = {
-	.name		= "sead3::fled",
-	.brightness_set = sead3_fled_set,
-	.flags		= LED_CORE_SUSPENDRESUME,
-};
-
-static int sead3_led_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ret = led_classdev_register(&pdev->dev, &sead3_pled);
-	if (ret < 0)
-		return ret;
-
-	ret = led_classdev_register(&pdev->dev, &sead3_fled);
-	if (ret < 0)
-		led_classdev_unregister(&sead3_pled);
-
-	return ret;
-}
-
-static int sead3_led_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&sead3_pled);
-	led_classdev_unregister(&sead3_fled);
-	return 0;
-}
-
-static struct platform_driver sead3_led_driver = {
-	.probe		= sead3_led_probe,
-	.remove		= sead3_led_remove,
-	.driver		= {
-		.name		= "sead3-led",
-	},
-};
-
-module_platform_driver(sead3_led_driver);
-
-MODULE_AUTHOR("Kristian Kielhofner <kris@krisk.org>");
-MODULE_DESCRIPTION("SEAD3 LED driver");
-MODULE_LICENSE("GPL");
diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
index 0c4a133f6..1a8c96035 100644
--- a/arch/mips/net/bpf_jit.c
+++ b/arch/mips/net/bpf_jit.c
@@ -521,19 +521,6 @@ static inline u16 align_sp(unsigned int num)
 	return num;
 }
 
-static bool is_load_to_a(u16 inst)
-{
-	switch (inst) {
-	case BPF_LD | BPF_W | BPF_LEN:
-	case BPF_LD | BPF_W | BPF_ABS:
-	case BPF_LD | BPF_H | BPF_ABS:
-	case BPF_LD | BPF_B | BPF_ABS:
-		return true;
-	default:
-		return false;
-	}
-}
-
 static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset)
 {
 	int i = 0, real_off = 0;
@@ -614,7 +601,6 @@ static unsigned int get_stack_depth(struct jit_ctx *ctx)
 
 static void build_prologue(struct jit_ctx *ctx)
 {
-	u16 first_inst = ctx->skf->insns[0].code;
 	int sp_off;
 
 	/* Calculate the total offset for the stack pointer */
@@ -641,7 +627,7 @@ static void build_prologue(struct jit_ctx *ctx)
 		emit_jit_reg_move(r_X, r_zero, ctx);
 
 	/* Do not leak kernel data to userspace */
-	if ((first_inst != (BPF_RET | BPF_K)) && !(is_load_to_a(first_inst)))
+	if (bpf_needs_clear_a(&ctx->skf->insns[0]))
 		emit_jit_reg_move(r_A, r_zero, ctx);
 }
 
@@ -1251,7 +1237,7 @@ void bpf_jit_compile(struct bpf_prog *fp)
 		bpf_jit_dump(fp->len, alloc_size, 2, ctx.target);
 
 	fp->bpf_func = (void *)ctx.target;
-	fp->jited = true;
+	fp->jited = 1;
 
 out:
 	kfree(ctx.offsets);
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
index a625bdb6d..856a6e6d2 100644
--- a/arch/mips/netlogic/xlp/dt.c
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -87,7 +87,6 @@ void __init *xlp_dt_init(void *fdtp)
 void __init xlp_early_init_devtree(void)
 {
 	__dt_setup_arch(xlp_fdt_blob);
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 }
 
 void __init device_tree_init(void)
diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
index 8a9780226..a245cad43 100644
--- a/arch/mips/pci/pci-rt2880.c
+++ b/arch/mips/pci/pci-rt2880.c
@@ -11,6 +11,7 @@
  *  by the Free Software Foundation.
  */
 
+#include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/io.h>
@@ -220,7 +221,6 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 static int rt288x_pci_probe(struct platform_device *pdev)
 {
 	void __iomem *io_map_base;
-	int i;
 
 	rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE);
 
@@ -232,8 +232,7 @@ static int rt288x_pci_probe(struct platform_device *pdev)
 	ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
 
 	rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
-	for (i = 0; i < 0xfffff; i++)
-		;
+	udelay(1);
 
 	rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
 	rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index ed6732f9a..53a42b070 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -432,8 +432,7 @@ static int rt3883_pci_probe(struct platform_device *pdev)
 
 	/* find the interrupt controller child node */
 	for_each_child_of_node(np, child) {
-		if (of_get_property(child, "interrupt-controller", NULL) &&
-		    of_node_get(child)) {
+		if (of_get_property(child, "interrupt-controller", NULL)) {
 			rpc->intc_of_node = child;
 			break;
 		}
@@ -449,8 +448,7 @@ static int rt3883_pci_probe(struct platform_device *pdev)
 	/* find the PCI host bridge child node */
 	for_each_child_of_node(np, child) {
 		if (child->type &&
-		    of_node_cmp(child->type, "pci") == 0 &&
-		    of_node_get(child)) {
+		    of_node_cmp(child->type, "pci") == 0) {
 			rpc->pci_controller.of_node = child;
 			break;
 		}
diff --git a/arch/mips/pistachio/init.c b/arch/mips/pistachio/init.c
index 8bd8ebb20..96ba2cc9a 100644
--- a/arch/mips/pistachio/init.c
+++ b/arch/mips/pistachio/init.c
@@ -58,7 +58,6 @@ void __init plat_mem_setup(void)
 		panic("Device-tree not present");
 
 	__dt_setup_arch((void *)fw_arg1);
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 
 	plat_setup_iocoherency();
 }
diff --git a/arch/mips/pistachio/time.c b/arch/mips/pistachio/time.c
index 8a377346f..1022201b2 100644
--- a/arch/mips/pistachio/time.c
+++ b/arch/mips/pistachio/time.c
@@ -39,7 +39,7 @@ void __init plat_time_init(void)
 	struct clk *clk;
 
 	of_clk_init(NULL);
-	clocksource_of_init();
+	clocksource_probe();
 
 	np = of_get_cpu_node(0, NULL);
 	if (!np) {
diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c
index 4f925e06c..9d293b3e9 100644
--- a/arch/mips/pmcs-msp71xx/msp_setup.c
+++ b/arch/mips/pmcs-msp71xx/msp_setup.c
@@ -10,6 +10,8 @@
  * option) any later version.
  */
 
+#include <linux/delay.h>
+
 #include <asm/bootinfo.h>
 #include <asm/cacheflush.h>
 #include <asm/idle.h>
@@ -37,7 +39,6 @@ extern void msp_serial_setup(void);
 void msp7120_reset(void)
 {
 	void *start, *end, *iptr;
-	register int i;
 
 	/* Diasble all interrupts */
 	local_irq_disable();
@@ -77,7 +78,7 @@ void msp7120_reset(void)
 	 */
 
 	/* Wait a bit for the DDRC to settle */
-	for (i = 0; i < 100000000; i++);
+	mdelay(125);
 
 #if defined(CONFIG_PMC_MSP7120_GW)
 	/*
diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
index a8e70a9f2..e46f91f97 100644
--- a/arch/mips/ralink/cevt-rt3352.c
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -48,7 +48,7 @@ static int systick_next_event(unsigned long delta,
 	sdev = container_of(evt, struct systick_device, dev);
 	count = ioread32(sdev->membase + SYSTICK_COUNT);
 	count = (count + delta) % SYSTICK_FREQ;
-	iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
+	iowrite32(count, sdev->membase + SYSTICK_COMPARE);
 
 	return 0;
 }
diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
index feb5a9bf9..25c4a6177 100644
--- a/arch/mips/ralink/clk.c
+++ b/arch/mips/ralink/clk.c
@@ -75,5 +75,5 @@ void __init plat_time_init(void)
 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
 	mips_hpt_frequency = clk_get_rate(clk) / 2;
 	clk_put(clk);
-	clocksource_of_init();
+	clocksource_probe();
 }
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
index 255d695ec..3c59ffe5f 100644
--- a/arch/mips/ralink/early_printk.c
+++ b/arch/mips/ralink/early_printk.c
@@ -25,11 +25,13 @@
 #define MT7628_CHIP_NAME1	0x20203832
 
 #define UART_REG_TX		0x04
+#define UART_REG_LCR		0x0c
 #define UART_REG_LSR		0x14
 #define UART_REG_LSR_RT2880	0x1c
 
 static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
 static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
+static int init_complete;
 
 static inline void uart_w32(u32 val, unsigned reg)
 {
@@ -47,8 +49,32 @@ static inline int soc_is_mt7628(void)
 		(__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
 }
 
+static void find_uart_base(void)
+{
+	int i;
+
+	if (!soc_is_mt7628())
+		return;
+
+	for (i = 0; i < 3; i++) {
+		u32 reg = uart_r32(UART_REG_LCR + (0x100 * i));
+
+		if (!reg)
+			continue;
+
+		uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE +
+							  (0x100 * i));
+		break;
+	}
+}
+
 void prom_putchar(unsigned char ch)
 {
+	if (!init_complete) {
+		find_uart_base();
+		init_complete = 1;
+	}
+
 	if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
 		uart_w32(ch, UART_TX);
 		while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index 2ea5ff6dc..dfb04fced 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -37,8 +37,17 @@
 #define PMU1_CFG		0x8C
 #define DIG_SW_SEL		BIT(25)
 
-/* is this a MT7620 or a MT7628 */
-enum mt762x_soc_type mt762x_soc;
+/* clock scaling */
+#define CLKCFG_FDIV_MASK	0x1f00
+#define CLKCFG_FDIV_USB_VAL	0x0300
+#define CLKCFG_FFRAC_MASK	0x001f
+#define CLKCFG_FFRAC_USB_VAL	0x0003
+
+/* EFUSE bits */
+#define EFUSE_MT7688		0x100000
+
+/* DRAM type bit */
+#define DRAM_TYPE_MT7628_MASK	0x1
 
 /* does the board have sdram or ddram */
 static int dram_type;
@@ -227,6 +236,12 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
 	{ 0 }
 };
 
+static inline int is_mt76x8(void)
+{
+	return ralink_soc == MT762X_SOC_MT7628AN ||
+	       ralink_soc == MT762X_SOC_MT7688;
+}
+
 static __init u32
 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
 {
@@ -381,7 +396,7 @@ void __init ralink_clk_init(void)
 #define RINT(x)		((x) / 1000000)
 #define RFRAC(x)	(((x) / 1000) % 1000)
 
-	if (mt762x_soc == MT762X_SOC_MT7628AN) {
+	if (is_mt76x8()) {
 		if (xtal_rate == MHZ(40))
 			cpu_rate = MHZ(580);
 		else
@@ -423,6 +438,20 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("10000b00.spi", sys_rate);
 	ralink_clk_add("10000c00.uartlite", periph_rate);
 	ralink_clk_add("10180000.wmac", xtal_rate);
+
+	if (IS_ENABLED(CONFIG_USB) && is_mt76x8()) {
+		/*
+		 * When the CPU goes into sleep mode, the BUS clock will be
+		 * too low for USB to function properly. Adjust the busses
+		 * fractional divider to fix this
+		 */
+		u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+		val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
+		val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
+
+		rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
+	}
 }
 
 void __init ralink_of_remap(void)
@@ -499,20 +528,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 	if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
 		if (bga) {
-			mt762x_soc = MT762X_SOC_MT7620A;
+			ralink_soc = MT762X_SOC_MT7620A;
 			name = "MT7620A";
 			soc_info->compatible = "ralink,mt7620a-soc";
 		} else {
-			mt762x_soc = MT762X_SOC_MT7620N;
+			ralink_soc = MT762X_SOC_MT7620N;
 			name = "MT7620N";
 			soc_info->compatible = "ralink,mt7620n-soc";
-#ifdef CONFIG_PCI
-			panic("mt7620n is only supported for non pci kernels");
-#endif
 		}
 	} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
-		mt762x_soc = MT762X_SOC_MT7628AN;
-		name = "MT7628AN";
+		u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+
+		if (efuse & EFUSE_MT7688) {
+			ralink_soc = MT762X_SOC_MT7688;
+			name = "MT7688";
+		} else {
+			ralink_soc = MT762X_SOC_MT7628AN;
+			name = "MT7628AN";
+		}
 		soc_info->compatible = "ralink,mt7628an-soc";
 	} else {
 		panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
@@ -525,10 +558,14 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 		(rev & CHIP_REV_ECO_MASK));
 
 	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
-	dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
+	if (is_mt76x8())
+		dram_type = cfg0 & DRAM_TYPE_MT7628_MASK;
+	else
+		dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) &
+			    SYSCFG0_DRAM_TYPE_MASK;
 
 	soc_info->mem_base = MT7620_DRAM_BASE;
-	if (mt762x_soc == MT762X_SOC_MT7628AN)
+	if (is_mt76x8())
 		mt7628_dram_init(soc_info);
 	else
 		mt7620_dram_init(soc_info);
@@ -541,7 +578,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	pr_info("Digital PMU set to %s control\n",
 		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
 
-	if (mt762x_soc == MT762X_SOC_MT7628AN)
+	if (is_mt76x8())
 		rt2880_pinmux_data = mt7628an_pinmux_data;
 	else
 		rt2880_pinmux_data = mt7620a_pinmux_data;
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 0d30dcd63..f9eda5d8f 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -74,8 +74,6 @@ void __init plat_mem_setup(void)
 	 */
 	__dt_setup_arch(__dtb_start);
 
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-
 	of_scan_flat_dt(early_init_dt_find_memory, NULL);
 	if (memory_dtb)
 		of_scan_flat_dt(early_init_dt_scan_memory, NULL);
diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
index 09419f67d..39a9142f7 100644
--- a/arch/mips/ralink/prom.c
+++ b/arch/mips/ralink/prom.c
@@ -15,11 +15,16 @@
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 
+#include <asm/mach-ralink/ralink_regs.h>
+
 #include "common.h"
 
 struct ralink_soc_info soc_info;
 struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
 
+enum ralink_soc_type ralink_soc;
+EXPORT_SYMBOL_GPL(ralink_soc);
+
 const char *get_system_type(void)
 {
 	return soc_info.sys_type;
diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
index 55c7ec59d..ee117c4bc 100644
--- a/arch/mips/ralink/reset.c
+++ b/arch/mips/ralink/reset.c
@@ -11,6 +11,7 @@
 #include <linux/pm.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/delay.h>
 #include <linux/reset-controller.h>
 
 #include <asm/reboot.h>
@@ -18,8 +19,10 @@
 #include <asm/mach-ralink/ralink_regs.h>
 
 /* Reset Control */
-#define SYSC_REG_RESET_CTRL     0x034
-#define RSTCTL_RESET_SYSTEM     BIT(0)
+#define SYSC_REG_RESET_CTRL	0x034
+
+#define RSTCTL_RESET_PCI	BIT(26)
+#define RSTCTL_RESET_SYSTEM	BIT(0)
 
 static int ralink_assert_device(struct reset_controller_dev *rcdev,
 				unsigned long id)
@@ -83,6 +86,11 @@ void ralink_rst_init(void)
 
 static void ralink_restart(char *command)
 {
+	if (IS_ENABLED(CONFIG_PCI)) {
+		rt_sysc_m32(0, RSTCTL_RESET_PCI, SYSC_REG_RESET_CTRL);
+		mdelay(50);
+	}
+
 	local_irq_disable();
 	rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
 	unreachable();
@@ -98,7 +106,6 @@ static int __init mips_reboot_setup(void)
 {
 	_machine_restart = ralink_restart;
 	_machine_halt = ralink_halt;
-	pm_power_off = ralink_halt;
 
 	return 0;
 }
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
index 738cec865..844f5cd55 100644
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -119,4 +119,5 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
 
 	rt2880_pinmux_data = rt2880_pinmux_data_act;
+	ralink_soc == RT2880_SOC;
 }
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index c40776ab6..9e4572592 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -21,8 +21,6 @@
 
 #include "common.h"
 
-enum rt305x_soc_type rt305x_soc;
-
 static struct rt2880_pmx_func i2c_func[] =  { FUNC("i2c", 0, 1, 2) };
 static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
 static struct rt2880_pmx_func uartf_func[] = {
@@ -201,6 +199,7 @@ void __init ralink_clk_init(void)
 	}
 
 	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("sys", sys_rate);
 	ralink_clk_add("10000b00.spi", sys_rate);
 	ralink_clk_add("10000100.timer", wdt_rate);
 	ralink_clk_add("10000120.watchdog", wdt_rate);
@@ -235,24 +234,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 		icache_sets = (read_c0_config1() >> 22) & 7;
 		if (icache_sets == 1) {
-			rt305x_soc = RT305X_SOC_RT3050;
+			ralink_soc = RT305X_SOC_RT3050;
 			name = "RT3050";
 			soc_info->compatible = "ralink,rt3050-soc";
 		} else {
-			rt305x_soc = RT305X_SOC_RT3052;
+			ralink_soc = RT305X_SOC_RT3052;
 			name = "RT3052";
 			soc_info->compatible = "ralink,rt3052-soc";
 		}
 	} else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT3350;
+		ralink_soc = RT305X_SOC_RT3350;
 		name = "RT3350";
 		soc_info->compatible = "ralink,rt3350-soc";
 	} else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT3352;
+		ralink_soc = RT305X_SOC_RT3352;
 		name = "RT3352";
 		soc_info->compatible = "ralink,rt3352-soc";
 	} else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT5350;
+		ralink_soc = RT305X_SOC_RT5350;
 		name = "RT5350";
 		soc_info->compatible = "ralink,rt5350-soc";
 	} else {
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
index 86a535c77..582995aaa 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -153,4 +153,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
 
 	rt2880_pinmux_data = rt3883_pinmux_data;
+
+	ralink_soc == RT3883_SOC;
 }
diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c
index 244f94276..6afa34346 100644
--- a/arch/mips/sni/reset.c
+++ b/arch/mips/sni/reset.c
@@ -3,6 +3,8 @@
  *
  *  Reset a SNI machine.
  */
+#include <linux/delay.h>
+
 #include <asm/io.h>
 #include <asm/reboot.h>
 #include <asm/sni.h>
@@ -24,7 +26,7 @@ static inline void kb_wait(void)
 /* XXX This ends up at the ARC firmware prompt ...  */
 void sni_machine_restart(char *command)
 {
-	int i, j;
+	int i;
 
 	/* This does a normal via the keyboard controller like a PC.
 	   We can do that easier ...  */
@@ -32,9 +34,9 @@ void sni_machine_restart(char *command)
 	for (;;) {
 		for (i = 0; i < 100; i++) {
 			kb_wait();
-			for (j = 0; j < 100000 ; j++)
-				/* nothing */;
+			udelay(50);
 			outb_p(0xfe, 0x64);	 /* pulse reset low */
+			udelay(50);
 		}
 	}
 }
diff --git a/arch/mips/txx9/generic/spi_eeprom.c b/arch/mips/txx9/generic/spi_eeprom.c
index 3dbad99d5..d833dd2c9 100644
--- a/arch/mips/txx9/generic/spi_eeprom.c
+++ b/arch/mips/txx9/generic/spi_eeprom.c
@@ -80,7 +80,6 @@ static int __init early_seeprom_probe(struct spi_device *spi)
 static struct spi_driver early_seeprom_driver __initdata = {
 	.driver = {
 		.name	= "at25",
-		.owner	= THIS_MODULE,
 	},
 	.probe	= early_seeprom_probe,
 };
diff --git a/arch/mips/vdso/.gitignore b/arch/mips/vdso/.gitignore
new file mode 100644
index 000000000..5286a7d73
--- /dev/null
+++ b/arch/mips/vdso/.gitignore
@@ -0,0 +1,4 @@
+*.so*
+vdso-*image.c
+genvdso
+vdso*.lds
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
new file mode 100644
index 000000000..14568900f
--- /dev/null
+++ b/arch/mips/vdso/Makefile
@@ -0,0 +1,160 @@
+# Objects to go into the VDSO.
+obj-vdso-y := elf.o gettimeofday.o sigreturn.o
+
+# Common compiler flags between ABIs.
+ccflags-vdso := \
+	$(filter -I%,$(KBUILD_CFLAGS)) \
+	$(filter -E%,$(KBUILD_CFLAGS)) \
+	$(filter -march=%,$(KBUILD_CFLAGS))
+cflags-vdso := $(ccflags-vdso) \
+	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
+	-O2 -g -fPIC -fno-common -fno-builtin -G 0 -DDISABLE_BRANCH_PROFILING \
+	$(call cc-option, -fno-stack-protector)
+aflags-vdso := $(ccflags-vdso) \
+	$(filter -I%,$(KBUILD_CFLAGS)) \
+	$(filter -E%,$(KBUILD_CFLAGS)) \
+	-D__ASSEMBLY__ -Wa,-gdwarf-2
+
+#
+# For the pre-R6 code in arch/mips/vdso/vdso.h for locating
+# the base address of VDSO, the linker will emit a R_MIPS_PC32
+# relocation in binutils > 2.25 but it will fail with older versions
+# because that relocation is not supported for that symbol. As a result
+# of which we are forced to disable the VDSO symbols when building
+# with < 2.25 binutils on pre-R6 kernels. For more references on why we
+# can't use other methods to get the base address of VDSO please refer to
+# the comments on that file.
+#
+ifndef CONFIG_CPU_MIPSR6
+  ifeq ($(call ld-ifversion, -lt, 22500000, y),y)
+    $(warning MIPS VDSO requires binutils >= 2.25)
+    obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y))
+    ccflags-vdso += -DDISABLE_MIPS_VDSO
+  endif
+endif
+
+# VDSO linker flags.
+VDSO_LDFLAGS := \
+	-Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1 \
+	-nostdlib -shared \
+	$(call cc-ldoption, -Wl$(comma)--hash-style=sysv) \
+	$(call cc-ldoption, -Wl$(comma)--build-id)
+
+GCOV_PROFILE := n
+
+#
+# Shared build commands.
+#
+
+quiet_cmd_vdsold = VDSO    $@
+      cmd_vdsold = $(CC) $(c_flags) $(VDSO_LDFLAGS) \
+                   -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@
+
+hostprogs-y := genvdso
+
+quiet_cmd_genvdso = GENVDSO $@
+define cmd_genvdso
+	cp $< $(<:%.dbg=%) && \
+	$(OBJCOPY) -S $< $(<:%.dbg=%) && \
+	$(obj)/genvdso $< $(<:%.dbg=%) $@ $(VDSO_NAME)
+endef
+
+#
+# Build native VDSO.
+#
+
+native-abi := $(filter -mabi=%,$(KBUILD_CFLAGS))
+
+targets += $(obj-vdso-y)
+targets += vdso.lds vdso.so.dbg vdso.so vdso-image.c
+
+obj-vdso := $(obj-vdso-y:%.o=$(obj)/%.o)
+
+$(obj-vdso): KBUILD_CFLAGS := $(cflags-vdso) $(native-abi)
+$(obj-vdso): KBUILD_AFLAGS := $(aflags-vdso) $(native-abi)
+
+$(obj)/vdso.lds: KBUILD_CPPFLAGS := $(native-abi)
+
+$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
+	$(call if_changed,vdsold)
+
+$(obj)/vdso-image.c: $(obj)/vdso.so.dbg $(obj)/genvdso FORCE
+	$(call if_changed,genvdso)
+
+obj-y += vdso-image.o
+
+#
+# Build O32 VDSO.
+#
+
+# Define these outside the ifdef to ensure they are picked up by clean.
+targets += $(obj-vdso-y:%.o=%-o32.o)
+targets += vdso-o32.lds vdso-o32.so.dbg vdso-o32.so vdso-o32-image.c
+
+ifdef CONFIG_MIPS32_O32
+
+obj-vdso-o32 := $(obj-vdso-y:%.o=$(obj)/%-o32.o)
+
+$(obj-vdso-o32): KBUILD_CFLAGS := $(cflags-vdso) -mabi=32
+$(obj-vdso-o32): KBUILD_AFLAGS := $(aflags-vdso) -mabi=32
+
+$(obj)/%-o32.o: $(src)/%.S FORCE
+	$(call if_changed_dep,as_o_S)
+
+$(obj)/%-o32.o: $(src)/%.c FORCE
+	$(call cmd,force_checksrc)
+	$(call if_changed_rule,cc_o_c)
+
+$(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := -mabi=32
+$(obj)/vdso-o32.lds: $(src)/vdso.lds.S FORCE
+	$(call if_changed_dep,cpp_lds_S)
+
+$(obj)/vdso-o32.so.dbg: $(obj)/vdso-o32.lds $(obj-vdso-o32) FORCE
+	$(call if_changed,vdsold)
+
+$(obj)/vdso-o32-image.c: VDSO_NAME := o32
+$(obj)/vdso-o32-image.c: $(obj)/vdso-o32.so.dbg $(obj)/genvdso FORCE
+	$(call if_changed,genvdso)
+
+obj-y += vdso-o32-image.o
+
+endif
+
+#
+# Build N32 VDSO.
+#
+
+targets += $(obj-vdso-y:%.o=%-n32.o)
+targets += vdso-n32.lds vdso-n32.so.dbg vdso-n32.so vdso-n32-image.c
+
+ifdef CONFIG_MIPS32_N32
+
+obj-vdso-n32 := $(obj-vdso-y:%.o=$(obj)/%-n32.o)
+
+$(obj-vdso-n32): KBUILD_CFLAGS := $(cflags-vdso) -mabi=n32
+$(obj-vdso-n32): KBUILD_AFLAGS := $(aflags-vdso) -mabi=n32
+
+$(obj)/%-n32.o: $(src)/%.S FORCE
+	$(call if_changed_dep,as_o_S)
+
+$(obj)/%-n32.o: $(src)/%.c FORCE
+	$(call cmd,force_checksrc)
+	$(call if_changed_rule,cc_o_c)
+
+$(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := -mabi=n32
+$(obj)/vdso-n32.lds: $(src)/vdso.lds.S FORCE
+	$(call if_changed_dep,cpp_lds_S)
+
+$(obj)/vdso-n32.so.dbg: $(obj)/vdso-n32.lds $(obj-vdso-n32) FORCE
+	$(call if_changed,vdsold)
+
+$(obj)/vdso-n32-image.c: VDSO_NAME := n32
+$(obj)/vdso-n32-image.c: $(obj)/vdso-n32.so.dbg $(obj)/genvdso FORCE
+	$(call if_changed,genvdso)
+
+obj-y += vdso-n32-image.o
+
+endif
+
+# FIXME: Need install rule for debug.
+# Needs to deal with dependency for generation of dbg by cmd_genvdso...
diff --git a/arch/mips/vdso/elf.S b/arch/mips/vdso/elf.S
new file mode 100644
index 000000000..be37bbb1f
--- /dev/null
+++ b/arch/mips/vdso/elf.S
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include "vdso.h"
+
+#include <linux/elfnote.h>
+#include <linux/version.h>
+
+ELFNOTE_START(Linux, 0, "a")
+	.long LINUX_VERSION_CODE
+ELFNOTE_END
+
+/*
+ * The .MIPS.abiflags section must be defined with the FP ABI flags set
+ * to 'any' to be able to link with both old and new libraries.
+ * Newer toolchains are capable of automatically generating this, but we want
+ * to work with older toolchains as well. Therefore, we define the contents of
+ * this section here (under different names), and then genvdso will patch
+ * it to have the correct name and type.
+ *
+ * We base the .MIPS.abiflags section on preprocessor definitions rather than
+ * CONFIG_* because we need to match the particular ABI we are building the
+ * VDSO for.
+ *
+ * See https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking
+ * for the .MIPS.abiflags section description.
+ */
+
+	.section .mips_abiflags, "a"
+	.align 3
+__mips_abiflags:
+	.hword	0		/* version */
+	.byte	__mips		/* isa_level */
+
+	/* isa_rev */
+#ifdef __mips_isa_rev
+	.byte	__mips_isa_rev
+#else
+	.byte	0
+#endif
+
+	/* gpr_size */
+#ifdef __mips64
+	.byte	2		/* AFL_REG_64 */
+#else
+	.byte	1		/* AFL_REG_32 */
+#endif
+
+	/* cpr1_size */
+#if (defined(__mips_isa_rev) && __mips_isa_rev >= 6) || defined(__mips64)
+	.byte	2		/* AFL_REG_64 */
+#else
+	.byte	1		/* AFL_REG_32 */
+#endif
+
+	.byte	0		/* cpr2_size (AFL_REG_NONE) */
+	.byte	0		/* fp_abi (Val_GNU_MIPS_ABI_FP_ANY) */
+	.word	0		/* isa_ext */
+	.word	0		/* ases */
+	.word	0		/* flags1 */
+	.word	0		/* flags2 */
diff --git a/arch/mips/vdso/genvdso.c b/arch/mips/vdso/genvdso.c
new file mode 100644
index 000000000..530a36f46
--- /dev/null
+++ b/arch/mips/vdso/genvdso.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * This tool is used to generate the real VDSO images from the raw image. It
+ * first patches up the MIPS ABI flags and GNU attributes sections defined in
+ * elf.S to have the correct name and type. It then generates a C source file
+ * to be compiled into the kernel containing the VDSO image data and a
+ * mips_vdso_image struct for it, including symbol offsets extracted from the
+ * image.
+ *
+ * We need to be passed both a stripped and unstripped VDSO image. The stripped
+ * image is compiled into the kernel, but we must also patch up the unstripped
+ * image's ABI flags sections so that it can be installed and used for
+ * debugging.
+ */
+
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+
+#include <byteswap.h>
+#include <elf.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <inttypes.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+/* Define these in case the system elf.h is not new enough to have them. */
+#ifndef SHT_GNU_ATTRIBUTES
+# define SHT_GNU_ATTRIBUTES	0x6ffffff5
+#endif
+#ifndef SHT_MIPS_ABIFLAGS
+# define SHT_MIPS_ABIFLAGS	0x7000002a
+#endif
+
+enum {
+	ABI_O32 = (1 << 0),
+	ABI_N32 = (1 << 1),
+	ABI_N64 = (1 << 2),
+
+	ABI_ALL = ABI_O32 | ABI_N32 | ABI_N64,
+};
+
+/* Symbols the kernel requires offsets for. */
+static struct {
+	const char *name;
+	const char *offset_name;
+	unsigned int abis;
+} vdso_symbols[] = {
+	{ "__vdso_sigreturn", "off_sigreturn", ABI_O32 },
+	{ "__vdso_rt_sigreturn", "off_rt_sigreturn", ABI_ALL },
+	{}
+};
+
+static const char *program_name;
+static const char *vdso_name;
+static unsigned char elf_class;
+static unsigned int elf_abi;
+static bool need_swap;
+static FILE *out_file;
+
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+# define HOST_ORDER		ELFDATA2LSB
+#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+# define HOST_ORDER		ELFDATA2MSB
+#endif
+
+#define BUILD_SWAP(bits)						\
+	static uint##bits##_t swap_uint##bits(uint##bits##_t val)	\
+	{								\
+		return need_swap ? bswap_##bits(val) : val;		\
+	}
+
+BUILD_SWAP(16)
+BUILD_SWAP(32)
+BUILD_SWAP(64)
+
+#define __FUNC(name, bits) name##bits
+#define _FUNC(name, bits) __FUNC(name, bits)
+#define FUNC(name) _FUNC(name, ELF_BITS)
+
+#define __ELF(x, bits) Elf##bits##_##x
+#define _ELF(x, bits) __ELF(x, bits)
+#define ELF(x) _ELF(x, ELF_BITS)
+
+/*
+ * Include genvdso.h twice with ELF_BITS defined differently to get functions
+ * for both ELF32 and ELF64.
+ */
+
+#define ELF_BITS 64
+#include "genvdso.h"
+#undef ELF_BITS
+
+#define ELF_BITS 32
+#include "genvdso.h"
+#undef ELF_BITS
+
+static void *map_vdso(const char *path, size_t *_size)
+{
+	int fd;
+	struct stat stat;
+	void *addr;
+	const Elf32_Ehdr *ehdr;
+
+	fd = open(path, O_RDWR);
+	if (fd < 0) {
+		fprintf(stderr, "%s: Failed to open '%s': %s\n", program_name,
+			path, strerror(errno));
+		return NULL;
+	}
+
+	if (fstat(fd, &stat) != 0) {
+		fprintf(stderr, "%s: Failed to stat '%s': %s\n", program_name,
+			path, strerror(errno));
+		return NULL;
+	}
+
+	addr = mmap(NULL, stat.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd,
+		    0);
+	if (addr == MAP_FAILED) {
+		fprintf(stderr, "%s: Failed to map '%s': %s\n", program_name,
+			path, strerror(errno));
+		return NULL;
+	}
+
+	/* ELF32/64 header formats are the same for the bits we're checking. */
+	ehdr = addr;
+
+	if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG) != 0) {
+		fprintf(stderr, "%s: '%s' is not an ELF file\n", program_name,
+			path);
+		return NULL;
+	}
+
+	elf_class = ehdr->e_ident[EI_CLASS];
+	switch (elf_class) {
+	case ELFCLASS32:
+	case ELFCLASS64:
+		break;
+	default:
+		fprintf(stderr, "%s: '%s' has invalid ELF class\n",
+			program_name, path);
+		return NULL;
+	}
+
+	switch (ehdr->e_ident[EI_DATA]) {
+	case ELFDATA2LSB:
+	case ELFDATA2MSB:
+		need_swap = ehdr->e_ident[EI_DATA] != HOST_ORDER;
+		break;
+	default:
+		fprintf(stderr, "%s: '%s' has invalid ELF data order\n",
+			program_name, path);
+		return NULL;
+	}
+
+	if (swap_uint16(ehdr->e_machine) != EM_MIPS) {
+		fprintf(stderr,
+			"%s: '%s' has invalid ELF machine (expected EM_MIPS)\n",
+			program_name, path);
+		return NULL;
+	} else if (swap_uint16(ehdr->e_type) != ET_DYN) {
+		fprintf(stderr,
+			"%s: '%s' has invalid ELF type (expected ET_DYN)\n",
+			program_name, path);
+		return NULL;
+	}
+
+	*_size = stat.st_size;
+	return addr;
+}
+
+static bool patch_vdso(const char *path, void *vdso)
+{
+	if (elf_class == ELFCLASS64)
+		return patch_vdso64(path, vdso);
+	else
+		return patch_vdso32(path, vdso);
+}
+
+static bool get_symbols(const char *path, void *vdso)
+{
+	if (elf_class == ELFCLASS64)
+		return get_symbols64(path, vdso);
+	else
+		return get_symbols32(path, vdso);
+}
+
+int main(int argc, char **argv)
+{
+	const char *dbg_vdso_path, *vdso_path, *out_path;
+	void *dbg_vdso, *vdso;
+	size_t dbg_vdso_size, vdso_size, i;
+
+	program_name = argv[0];
+
+	if (argc < 4 || argc > 5) {
+		fprintf(stderr,
+			"Usage: %s <debug VDSO> <stripped VDSO> <output file> [<name>]\n",
+			program_name);
+		return EXIT_FAILURE;
+	}
+
+	dbg_vdso_path = argv[1];
+	vdso_path = argv[2];
+	out_path = argv[3];
+	vdso_name = (argc > 4) ? argv[4] : "";
+
+	dbg_vdso = map_vdso(dbg_vdso_path, &dbg_vdso_size);
+	if (!dbg_vdso)
+		return EXIT_FAILURE;
+
+	vdso = map_vdso(vdso_path, &vdso_size);
+	if (!vdso)
+		return EXIT_FAILURE;
+
+	/* Patch both the VDSOs' ABI flags sections. */
+	if (!patch_vdso(dbg_vdso_path, dbg_vdso))
+		return EXIT_FAILURE;
+	if (!patch_vdso(vdso_path, vdso))
+		return EXIT_FAILURE;
+
+	if (msync(dbg_vdso, dbg_vdso_size, MS_SYNC) != 0) {
+		fprintf(stderr, "%s: Failed to sync '%s': %s\n", program_name,
+			dbg_vdso_path, strerror(errno));
+		return EXIT_FAILURE;
+	} else if (msync(vdso, vdso_size, MS_SYNC) != 0) {
+		fprintf(stderr, "%s: Failed to sync '%s': %s\n", program_name,
+			vdso_path, strerror(errno));
+		return EXIT_FAILURE;
+	}
+
+	out_file = fopen(out_path, "w");
+	if (!out_file) {
+		fprintf(stderr, "%s: Failed to open '%s': %s\n", program_name,
+			out_path, strerror(errno));
+		return EXIT_FAILURE;
+	}
+
+	fprintf(out_file, "/* Automatically generated - do not edit */\n");
+	fprintf(out_file, "#include <linux/linkage.h>\n");
+	fprintf(out_file, "#include <linux/mm.h>\n");
+	fprintf(out_file, "#include <asm/vdso.h>\n");
+
+	/* Write out the stripped VDSO data. */
+	fprintf(out_file,
+		"static unsigned char vdso_data[PAGE_ALIGN(%zu)] __page_aligned_data = {\n\t",
+		vdso_size);
+	for (i = 0; i < vdso_size; i++) {
+		if (!(i % 10))
+			fprintf(out_file, "\n\t");
+		fprintf(out_file, "0x%02x, ", ((unsigned char *)vdso)[i]);
+	}
+	fprintf(out_file, "\n};\n");
+
+	/* Preallocate a page array. */
+	fprintf(out_file,
+		"static struct page *vdso_pages[PAGE_ALIGN(%zu) / PAGE_SIZE];\n",
+		vdso_size);
+
+	fprintf(out_file, "struct mips_vdso_image vdso_image%s%s = {\n",
+		(vdso_name[0]) ? "_" : "", vdso_name);
+	fprintf(out_file, "\t.data = vdso_data,\n");
+	fprintf(out_file, "\t.size = PAGE_ALIGN(%zu),\n", vdso_size);
+	fprintf(out_file, "\t.mapping = {\n");
+	fprintf(out_file, "\t\t.name = \"[vdso]\",\n");
+	fprintf(out_file, "\t\t.pages = vdso_pages,\n");
+	fprintf(out_file, "\t},\n");
+
+	/* Calculate and write symbol offsets to <output file> */
+	if (!get_symbols(dbg_vdso_path, dbg_vdso)) {
+		unlink(out_path);
+		return EXIT_FAILURE;
+	}
+
+	fprintf(out_file, "};\n");
+
+	return EXIT_SUCCESS;
+}
diff --git a/arch/mips/vdso/genvdso.h b/arch/mips/vdso/genvdso.h
new file mode 100644
index 000000000..943347270
--- /dev/null
+++ b/arch/mips/vdso/genvdso.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+static inline bool FUNC(patch_vdso)(const char *path, void *vdso)
+{
+	const ELF(Ehdr) *ehdr = vdso;
+	void *shdrs;
+	ELF(Shdr) *shdr;
+	char *shstrtab, *name;
+	uint16_t sh_count, sh_entsize, i;
+	unsigned int local_gotno, symtabno, gotsym;
+	ELF(Dyn) *dyn = NULL;
+
+	shdrs = vdso + FUNC(swap_uint)(ehdr->e_shoff);
+	sh_count = swap_uint16(ehdr->e_shnum);
+	sh_entsize = swap_uint16(ehdr->e_shentsize);
+
+	shdr = shdrs + (sh_entsize * swap_uint16(ehdr->e_shstrndx));
+	shstrtab = vdso + FUNC(swap_uint)(shdr->sh_offset);
+
+	for (i = 0; i < sh_count; i++) {
+		shdr = shdrs + (i * sh_entsize);
+		name = shstrtab + swap_uint32(shdr->sh_name);
+
+		/*
+		 * Ensure there are no relocation sections - ld.so does not
+		 * relocate the VDSO so if there are relocations things will
+		 * break.
+		 */
+		switch (swap_uint32(shdr->sh_type)) {
+		case SHT_REL:
+		case SHT_RELA:
+			fprintf(stderr,
+				"%s: '%s' contains relocation sections\n",
+				program_name, path);
+			return false;
+		case SHT_DYNAMIC:
+			dyn = vdso + FUNC(swap_uint)(shdr->sh_offset);
+			break;
+		}
+
+		/* Check for existing sections. */
+		if (strcmp(name, ".MIPS.abiflags") == 0) {
+			fprintf(stderr,
+				"%s: '%s' already contains a '.MIPS.abiflags' section\n",
+				program_name, path);
+			return false;
+		}
+
+		if (strcmp(name, ".mips_abiflags") == 0) {
+			strcpy(name, ".MIPS.abiflags");
+			shdr->sh_type = swap_uint32(SHT_MIPS_ABIFLAGS);
+			shdr->sh_entsize = shdr->sh_size;
+		}
+	}
+
+	/*
+	 * Ensure the GOT has no entries other than the standard 2, for the same
+	 * reason we check that there's no relocation sections above.
+	 * The standard two entries are:
+	 * - Lazy resolver
+	 * - Module pointer
+	 */
+	if (dyn) {
+		local_gotno = symtabno = gotsym = 0;
+
+		while (FUNC(swap_uint)(dyn->d_tag) != DT_NULL) {
+			switch (FUNC(swap_uint)(dyn->d_tag)) {
+			/*
+			 * This member holds the number of local GOT entries.
+			 */
+			case DT_MIPS_LOCAL_GOTNO:
+				local_gotno = FUNC(swap_uint)(dyn->d_un.d_val);
+				break;
+			/*
+			 * This member holds the number of entries in the
+			 * .dynsym section.
+			 */
+			case DT_MIPS_SYMTABNO:
+				symtabno = FUNC(swap_uint)(dyn->d_un.d_val);
+				break;
+			/*
+			 * This member holds the index of the first dynamic
+			 * symbol table entry that corresponds to an entry in
+			 * the GOT.
+			 */
+			case DT_MIPS_GOTSYM:
+				gotsym = FUNC(swap_uint)(dyn->d_un.d_val);
+				break;
+			}
+
+			dyn++;
+		}
+
+		if (local_gotno > 2 || symtabno - gotsym) {
+			fprintf(stderr,
+				"%s: '%s' contains unexpected GOT entries\n",
+				program_name, path);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+static inline bool FUNC(get_symbols)(const char *path, void *vdso)
+{
+	const ELF(Ehdr) *ehdr = vdso;
+	void *shdrs, *symtab;
+	ELF(Shdr) *shdr;
+	const ELF(Sym) *sym;
+	char *strtab, *name;
+	uint16_t sh_count, sh_entsize, st_count, st_entsize, i, j;
+	uint64_t offset;
+	uint32_t flags;
+
+	shdrs = vdso + FUNC(swap_uint)(ehdr->e_shoff);
+	sh_count = swap_uint16(ehdr->e_shnum);
+	sh_entsize = swap_uint16(ehdr->e_shentsize);
+
+	for (i = 0; i < sh_count; i++) {
+		shdr = shdrs + (i * sh_entsize);
+
+		if (swap_uint32(shdr->sh_type) == SHT_SYMTAB)
+			break;
+	}
+
+	if (i == sh_count) {
+		fprintf(stderr, "%s: '%s' has no symbol table\n", program_name,
+			path);
+		return false;
+	}
+
+	/* Get flags */
+	flags = swap_uint32(ehdr->e_flags);
+	if (elf_class == ELFCLASS64)
+		elf_abi = ABI_N64;
+	else if (flags & EF_MIPS_ABI2)
+		elf_abi = ABI_N32;
+	else
+		elf_abi = ABI_O32;
+
+	/* Get symbol table. */
+	symtab = vdso + FUNC(swap_uint)(shdr->sh_offset);
+	st_entsize = FUNC(swap_uint)(shdr->sh_entsize);
+	st_count = FUNC(swap_uint)(shdr->sh_size) / st_entsize;
+
+	/* Get string table. */
+	shdr = shdrs + (swap_uint32(shdr->sh_link) * sh_entsize);
+	strtab = vdso + FUNC(swap_uint)(shdr->sh_offset);
+
+	/* Write offsets for symbols needed by the kernel. */
+	for (i = 0; vdso_symbols[i].name; i++) {
+		if (!(vdso_symbols[i].abis & elf_abi))
+			continue;
+
+		for (j = 0; j < st_count; j++) {
+			sym = symtab + (j * st_entsize);
+			name = strtab + swap_uint32(sym->st_name);
+
+			if (!strcmp(name, vdso_symbols[i].name)) {
+				offset = FUNC(swap_uint)(sym->st_value);
+
+				fprintf(out_file,
+					"\t.%s = 0x%" PRIx64 ",\n",
+					vdso_symbols[i].offset_name, offset);
+				break;
+			}
+		}
+
+		if (j == st_count) {
+			fprintf(stderr,
+				"%s: '%s' is missing required symbol '%s'\n",
+				program_name, path, vdso_symbols[i].name);
+			return false;
+		}
+	}
+
+	return true;
+}
diff --git a/arch/mips/vdso/gettimeofday.c b/arch/mips/vdso/gettimeofday.c
new file mode 100644
index 000000000..ce89c9e29
--- /dev/null
+++ b/arch/mips/vdso/gettimeofday.c
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include "vdso.h"
+
+#include <linux/compiler.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/time.h>
+
+#include <asm/clocksource.h>
+#include <asm/io.h>
+#include <asm/mips-cm.h>
+#include <asm/unistd.h>
+#include <asm/vdso.h>
+
+static __always_inline int do_realtime_coarse(struct timespec *ts,
+					      const union mips_vdso_data *data)
+{
+	u32 start_seq;
+
+	do {
+		start_seq = vdso_data_read_begin(data);
+
+		ts->tv_sec = data->xtime_sec;
+		ts->tv_nsec = data->xtime_nsec >> data->cs_shift;
+	} while (vdso_data_read_retry(data, start_seq));
+
+	return 0;
+}
+
+static __always_inline int do_monotonic_coarse(struct timespec *ts,
+					       const union mips_vdso_data *data)
+{
+	u32 start_seq;
+	u32 to_mono_sec;
+	u32 to_mono_nsec;
+
+	do {
+		start_seq = vdso_data_read_begin(data);
+
+		ts->tv_sec = data->xtime_sec;
+		ts->tv_nsec = data->xtime_nsec >> data->cs_shift;
+
+		to_mono_sec = data->wall_to_mono_sec;
+		to_mono_nsec = data->wall_to_mono_nsec;
+	} while (vdso_data_read_retry(data, start_seq));
+
+	ts->tv_sec += to_mono_sec;
+	timespec_add_ns(ts, to_mono_nsec);
+
+	return 0;
+}
+
+#ifdef CONFIG_CSRC_R4K
+
+static __always_inline u64 read_r4k_count(void)
+{
+	unsigned int count;
+
+	__asm__ __volatile__(
+	"	.set push\n"
+	"	.set mips32r2\n"
+	"	rdhwr	%0, $2\n"
+	"	.set pop\n"
+	: "=r" (count));
+
+	return count;
+}
+
+#endif
+
+#ifdef CONFIG_CLKSRC_MIPS_GIC
+
+static __always_inline u64 read_gic_count(const union mips_vdso_data *data)
+{
+	void __iomem *gic = get_gic(data);
+	u32 hi, hi2, lo;
+
+	do {
+		hi = __raw_readl(gic + GIC_UMV_SH_COUNTER_63_32_OFS);
+		lo = __raw_readl(gic + GIC_UMV_SH_COUNTER_31_00_OFS);
+		hi2 = __raw_readl(gic + GIC_UMV_SH_COUNTER_63_32_OFS);
+	} while (hi2 != hi);
+
+	return (((u64)hi) << 32) + lo;
+}
+
+#endif
+
+static __always_inline u64 get_ns(const union mips_vdso_data *data)
+{
+	u64 cycle_now, delta, nsec;
+
+	switch (data->clock_mode) {
+#ifdef CONFIG_CSRC_R4K
+	case VDSO_CLOCK_R4K:
+		cycle_now = read_r4k_count();
+		break;
+#endif
+#ifdef CONFIG_CLKSRC_MIPS_GIC
+	case VDSO_CLOCK_GIC:
+		cycle_now = read_gic_count(data);
+		break;
+#endif
+	default:
+		return 0;
+	}
+
+	delta = (cycle_now - data->cs_cycle_last) & data->cs_mask;
+
+	nsec = (delta * data->cs_mult) + data->xtime_nsec;
+	nsec >>= data->cs_shift;
+
+	return nsec;
+}
+
+static __always_inline int do_realtime(struct timespec *ts,
+				       const union mips_vdso_data *data)
+{
+	u32 start_seq;
+	u64 ns;
+
+	do {
+		start_seq = vdso_data_read_begin(data);
+
+		if (data->clock_mode == VDSO_CLOCK_NONE)
+			return -ENOSYS;
+
+		ts->tv_sec = data->xtime_sec;
+		ns = get_ns(data);
+	} while (vdso_data_read_retry(data, start_seq));
+
+	ts->tv_nsec = 0;
+	timespec_add_ns(ts, ns);
+
+	return 0;
+}
+
+static __always_inline int do_monotonic(struct timespec *ts,
+					const union mips_vdso_data *data)
+{
+	u32 start_seq;
+	u64 ns;
+	u32 to_mono_sec;
+	u32 to_mono_nsec;
+
+	do {
+		start_seq = vdso_data_read_begin(data);
+
+		if (data->clock_mode == VDSO_CLOCK_NONE)
+			return -ENOSYS;
+
+		ts->tv_sec = data->xtime_sec;
+		ns = get_ns(data);
+
+		to_mono_sec = data->wall_to_mono_sec;
+		to_mono_nsec = data->wall_to_mono_nsec;
+	} while (vdso_data_read_retry(data, start_seq));
+
+	ts->tv_sec += to_mono_sec;
+	ts->tv_nsec = 0;
+	timespec_add_ns(ts, ns + to_mono_nsec);
+
+	return 0;
+}
+
+#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
+
+/*
+ * This is behind the ifdef so that we don't provide the symbol when there's no
+ * possibility of there being a usable clocksource, because there's nothing we
+ * can do without it. When libc fails the symbol lookup it should fall back on
+ * the standard syscall path.
+ */
+int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz)
+{
+	const union mips_vdso_data *data = get_vdso_data();
+	struct timespec ts;
+	int ret;
+
+	ret = do_realtime(&ts, data);
+	if (ret)
+		return ret;
+
+	if (tv) {
+		tv->tv_sec = ts.tv_sec;
+		tv->tv_usec = ts.tv_nsec / 1000;
+	}
+
+	if (tz) {
+		tz->tz_minuteswest = data->tz_minuteswest;
+		tz->tz_dsttime = data->tz_dsttime;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_CLKSRC_MIPS_GIC */
+
+int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts)
+{
+	const union mips_vdso_data *data = get_vdso_data();
+	int ret;
+
+	switch (clkid) {
+	case CLOCK_REALTIME_COARSE:
+		ret = do_realtime_coarse(ts, data);
+		break;
+	case CLOCK_MONOTONIC_COARSE:
+		ret = do_monotonic_coarse(ts, data);
+		break;
+	case CLOCK_REALTIME:
+		ret = do_realtime(ts, data);
+		break;
+	case CLOCK_MONOTONIC:
+		ret = do_monotonic(ts, data);
+		break;
+	default:
+		ret = -ENOSYS;
+		break;
+	}
+
+	/* If we return -ENOSYS libc should fall back to a syscall. */
+	return ret;
+}
diff --git a/arch/mips/vdso/sigreturn.S b/arch/mips/vdso/sigreturn.S
new file mode 100644
index 000000000..715bf5993
--- /dev/null
+++ b/arch/mips/vdso/sigreturn.S
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include "vdso.h"
+
+#include <uapi/asm/unistd.h>
+
+#include <asm/regdef.h>
+#include <asm/asm.h>
+
+	.section	.text
+	.cfi_sections	.debug_frame
+
+LEAF(__vdso_rt_sigreturn)
+	.cfi_startproc
+	.frame	sp, 0, ra
+	.mask	0x00000000, 0
+	.fmask	0x00000000, 0
+	.cfi_signal_frame
+
+	li	v0, __NR_rt_sigreturn
+	syscall
+
+	.cfi_endproc
+	END(__vdso_rt_sigreturn)
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+LEAF(__vdso_sigreturn)
+	.cfi_startproc
+	.frame	sp, 0, ra
+	.mask	0x00000000, 0
+	.fmask	0x00000000, 0
+	.cfi_signal_frame
+
+	li	v0, __NR_sigreturn
+	syscall
+
+	.cfi_endproc
+	END(__vdso_sigreturn)
+
+#endif
diff --git a/arch/mips/vdso/vdso.h b/arch/mips/vdso/vdso.h
new file mode 100644
index 000000000..cfb1be441
--- /dev/null
+++ b/arch/mips/vdso/vdso.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM != _MIPS_SIM_ABI64 && defined(CONFIG_64BIT)
+
+/* Building 32-bit VDSO for the 64-bit kernel. Fake a 32-bit Kconfig. */
+#undef CONFIG_64BIT
+#define CONFIG_32BIT 1
+#ifndef __ASSEMBLY__
+#include <asm-generic/atomic64.h>
+#endif
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/asm.h>
+#include <asm/page.h>
+#include <asm/vdso.h>
+
+static inline unsigned long get_vdso_base(void)
+{
+	unsigned long addr;
+
+	/*
+	 * We can't use cpu_has_mips_r6 since it needs the cpu_data[]
+	 * kernel symbol.
+	 */
+#ifdef CONFIG_CPU_MIPSR6
+	/*
+	 * lapc <symbol> is an alias to addiupc reg, <symbol> - .
+	 *
+	 * We can't use addiupc because there is no label-label
+	 * support for the addiupc reloc
+	 */
+	__asm__("lapc	%0, _start			\n"
+		: "=r" (addr) : :);
+#else
+	/*
+	 * Get the base load address of the VDSO. We have to avoid generating
+	 * relocations and references to the GOT because ld.so does not peform
+	 * relocations on the VDSO. We use the current offset from the VDSO base
+	 * and perform a PC-relative branch which gives the absolute address in
+	 * ra, and take the difference. The assembler chokes on
+	 * "li %0, _start - .", so embed the offset as a word and branch over
+	 * it.
+	 *
+	 */
+
+	__asm__(
+	"	.set push				\n"
+	"	.set noreorder				\n"
+	"	bal	1f				\n"
+	"	 nop					\n"
+	"	.word	_start - .			\n"
+	"1:	lw	%0, 0($31)			\n"
+	"	" STR(PTR_ADDU) " %0, $31, %0		\n"
+	"	.set pop				\n"
+	: "=r" (addr)
+	:
+	: "$31");
+#endif /* CONFIG_CPU_MIPSR6 */
+
+	return addr;
+}
+
+static inline const union mips_vdso_data *get_vdso_data(void)
+{
+	return (const union mips_vdso_data *)(get_vdso_base() - PAGE_SIZE);
+}
+
+#ifdef CONFIG_CLKSRC_MIPS_GIC
+
+static inline void __iomem *get_gic(const union mips_vdso_data *data)
+{
+	return (void __iomem *)data - PAGE_SIZE;
+}
+
+#endif /* CONFIG_CLKSRC_MIPS_GIC */
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/mips/vdso/vdso.lds.S b/arch/mips/vdso/vdso.lds.S
new file mode 100644
index 000000000..8df7dd53e
--- /dev/null
+++ b/arch/mips/vdso/vdso.lds.S
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+OUTPUT_FORMAT("elf64-tradlittlemips", "elf64-tradbigmips", "elf64-tradlittlemips")
+#elif _MIPS_SIM == _MIPS_SIM_NABI32
+OUTPUT_FORMAT("elf32-ntradlittlemips", "elf32-ntradbigmips", "elf32-ntradlittlemips")
+#else
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradbigmips", "elf32-tradlittlemips")
+#endif
+
+OUTPUT_ARCH(mips)
+
+SECTIONS
+{
+	PROVIDE(_start = .);
+	. = SIZEOF_HEADERS;
+
+	/*
+	 * In order to retain compatibility with older toolchains we provide the
+	 * ABI flags section ourself. Newer assemblers will automatically
+	 * generate .MIPS.abiflags sections so we discard such input sections,
+	 * and then manually define our own section here. genvdso will patch
+	 * this section to have the correct name/type.
+	 */
+	.mips_abiflags	: { *(.mips_abiflags) } 	:text :abiflags
+
+	.reginfo	: { *(.reginfo) }		:text :reginfo
+
+	.hash		: { *(.hash) }			:text
+	.gnu.hash	: { *(.gnu.hash) }
+	.dynsym		: { *(.dynsym) }
+	.dynstr		: { *(.dynstr) }
+	.gnu.version	: { *(.gnu.version) }
+	.gnu.version_d	: { *(.gnu.version_d) }
+	.gnu.version_r	: { *(.gnu.version_r) }
+
+	.note		: { *(.note.*) }		:text :note
+
+	.text		: { *(.text*) }			:text
+	PROVIDE (__etext = .);
+	PROVIDE (_etext = .);
+	PROVIDE (etext = .);
+
+	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text :eh_frame_hdr
+	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
+
+	.dynamic	: { *(.dynamic) }		:text :dynamic
+
+	.rodata		: { *(.rodata*) }		:text
+
+	_end = .;
+	PROVIDE(end = .);
+
+	/DISCARD/	: {
+		*(.MIPS.abiflags)
+		*(.gnu.attributes)
+		*(.note.GNU-stack)
+		*(.data .data.* .gnu.linkonce.d.* .sdata*)
+		*(.bss .sbss .dynbss .dynsbss)
+	}
+}
+
+PHDRS
+{
+	/*
+	 * Provide a PT_MIPS_ABIFLAGS header to assign the ABI flags section
+	 * to. We can specify the header type directly here so no modification
+	 * is needed later on.
+	 */
+	abiflags	0x70000003;
+
+	/*
+	 * The ABI flags header must exist directly after the PT_INTERP header,
+	 * so we must explicitly place the PT_MIPS_REGINFO header after it to
+	 * stop the linker putting one in at the start.
+	 */
+	reginfo		0x70000000;
+
+	text		PT_LOAD		FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */
+	dynamic		PT_DYNAMIC	FLAGS(4);		/* PF_R */
+	note		PT_NOTE		FLAGS(4);		/* PF_R */
+	eh_frame_hdr	PT_GNU_EH_FRAME;
+}
+
+VERSION
+{
+	LINUX_2.6 {
+#ifndef DISABLE_MIPS_VDSO
+	global:
+		__vdso_clock_gettime;
+		__vdso_gettimeofday;
+#endif
+	local: *;
+	};
+}
diff --git a/arch/mips/xilfpga/Kconfig b/arch/mips/xilfpga/Kconfig
new file mode 100644
index 000000000..42a030a0e
--- /dev/null
+++ b/arch/mips/xilfpga/Kconfig
@@ -0,0 +1,9 @@
+choice
+	prompt "Machine type"
+	depends on MACH_XILFPGA
+	default XILFPGA_NEXYS4DDR
+
+config XILFPGA_NEXYS4DDR
+	bool "Nexys4DDR by Digilent"
+
+endchoice
diff --git a/arch/mips/xilfpga/Makefile b/arch/mips/xilfpga/Makefile
new file mode 100644
index 000000000..a4deec6fa
--- /dev/null
+++ b/arch/mips/xilfpga/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Xilfpga
+#
+
+obj-y +=	init.o
+obj-y +=	intc.o
+obj-y +=	time.o
diff --git a/arch/mips/xilfpga/Platform b/arch/mips/xilfpga/Platform
new file mode 100644
index 000000000..ed375afe3
--- /dev/null
+++ b/arch/mips/xilfpga/Platform
@@ -0,0 +1,3 @@
+platform-$(CONFIG_MACH_XILFPGA) += xilfpga/
+cflags-$(CONFIG_MACH_XILFPGA) += -I$(srctree)/arch/mips/include/asm/mach-xilfpga
+load-$(CONFIG_MACH_XILFPGA) += 0xffffffff80100000
diff --git a/arch/mips/xilfpga/init.c b/arch/mips/xilfpga/init.c
new file mode 100644
index 000000000..ce2aee216
--- /dev/null
+++ b/arch/mips/xilfpga/init.c
@@ -0,0 +1,57 @@
+/*
+ * Xilfpga platform setup
+ *
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/prom.h>
+
+#define XILFPGA_UART_BASE	0xb0401000
+
+const char *get_system_type(void)
+{
+	return "MIPSfpga";
+}
+
+void __init plat_mem_setup(void)
+{
+	__dt_setup_arch(__dtb_start);
+	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+}
+
+void __init prom_init(void)
+{
+	setup_8250_early_printk_port(XILFPGA_UART_BASE, 2, 50000);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+void __init device_tree_init(void)
+{
+	if (!initial_boot_params)
+		return;
+
+	unflatten_and_copy_device_tree();
+}
+
+static int __init plat_of_setup(void)
+{
+	if (!of_have_populated_dt())
+		panic("Device tree not present");
+
+	if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
+		panic("Failed to populate DT");
+
+	return 0;
+}
+arch_initcall(plat_of_setup);
diff --git a/arch/mips/xilfpga/intc.c b/arch/mips/xilfpga/intc.c
new file mode 100644
index 000000000..c4d1a716b
--- /dev/null
+++ b/arch/mips/xilfpga/intc.c
@@ -0,0 +1,25 @@
+/*
+ * Xilfpga interrupt controller setup
+ *
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/of.h>
+#include <linux/of_irq.h>
+
+#include <asm/irq_cpu.h>
+
+static struct of_device_id of_irq_ids[] __initdata = {
+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
+	{},
+};
+
+void __init arch_init_irq(void)
+{
+	of_irq_init(of_irq_ids);
+}
diff --git a/arch/mips/xilfpga/time.c b/arch/mips/xilfpga/time.c
new file mode 100644
index 000000000..cbb3fca7b
--- /dev/null
+++ b/arch/mips/xilfpga/time.c
@@ -0,0 +1,41 @@
+/*
+ * Xilfpga clocksource/timer setup
+ *
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/of.h>
+
+#include <asm/time.h>
+
+void __init plat_time_init(void)
+{
+	struct device_node *np;
+	struct clk *clk;
+
+	of_clk_init(NULL);
+	clocksource_probe();
+
+	np = of_get_cpu_node(0, NULL);
+	if (!np) {
+		pr_err("Failed to get CPU node\n");
+		return;
+	}
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
+		return;
+	}
+
+	mips_hpt_frequency = clk_get_rate(clk) / 2;
+	clk_put(clk);
+}