Initial import

1 files changed, 174 insertions, 0 deletions

diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
new file mode 100644
index 000000000..df5124274
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-io-serial.c
@@ -0,0 +1,174 @@
+/* 16550 serial driver for gdbstub I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/nmi.h>
+
+#include <asm/pgtable.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/serial-regs.h>
+#include <unit/serial.h>
+#include <asm/smp.h>
+
+/*
+ * initialise the GDB stub
+ */
+void gdbstub_io_init(void)
+{
+	u16 tmp;
+
+	/* set up the serial port */
+	GDBPORT_SERIAL_LCR = UART_LCR_WLEN8; /* 1N8 */
+	GDBPORT_SERIAL_FCR = (UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+			      UART_FCR_CLEAR_XMIT);
+
+	FLOWCTL_CLEAR(DTR);
+	FLOWCTL_SET(RTS);
+
+	gdbstub_io_set_baud(115200);
+
+	/* we want to get serial receive interrupts */
+	XIRQxICR(GDBPORT_SERIAL_IRQ) = 0;
+	tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
+
+#if   CONFIG_GDBSTUB_IRQ_LEVEL == 0
+	IVAR0 = EXCEP_IRQ_LEVEL0;
+#elif CONFIG_GDBSTUB_IRQ_LEVEL == 1
+	IVAR1 = EXCEP_IRQ_LEVEL1;
+#elif CONFIG_GDBSTUB_IRQ_LEVEL == 2
+	IVAR2 = EXCEP_IRQ_LEVEL2;
+#elif CONFIG_GDBSTUB_IRQ_LEVEL == 3
+	IVAR3 = EXCEP_IRQ_LEVEL3;
+#elif CONFIG_GDBSTUB_IRQ_LEVEL == 4
+	IVAR4 = EXCEP_IRQ_LEVEL4;
+#elif CONFIG_GDBSTUB_IRQ_LEVEL == 5
+	IVAR5 = EXCEP_IRQ_LEVEL5;
+#else
+#error "Unknown irq level for gdbstub."
+#endif
+
+	set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL),
+		gdbstub_io_rx_handler);
+
+	XIRQxICR(GDBPORT_SERIAL_IRQ) &= ~GxICR_REQUEST;
+	XIRQxICR(GDBPORT_SERIAL_IRQ) =
+		GxICR_ENABLE | NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL);
+	tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
+
+	GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
+
+	/* permit level 0 IRQs to take place */
+	arch_local_change_intr_mask_level(
+		NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+}
+
+/*
+ * set up the GDB stub serial port baud rate timers
+ */
+void gdbstub_io_set_baud(unsigned baud)
+{
+	unsigned value;
+	u8 lcr;
+
+	value = 18432000 / 16 / baud;
+
+	lcr = GDBPORT_SERIAL_LCR;
+	GDBPORT_SERIAL_LCR |= UART_LCR_DLAB;
+	GDBPORT_SERIAL_DLL = value & 0xff;
+	GDBPORT_SERIAL_DLM = (value >> 8) & 0xff;
+	GDBPORT_SERIAL_LCR = lcr;
+}
+
+/*
+ * wait for a character to come from the debugger
+ */
+int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
+{
+	unsigned ix;
+	u8 ch, st;
+#if defined(CONFIG_MN10300_WD_TIMER)
+	int cpu;
+#endif
+
+	*_ch = 0xff;
+
+	if (gdbstub_rx_unget) {
+		*_ch = gdbstub_rx_unget;
+		gdbstub_rx_unget = 0;
+		return 0;
+	}
+
+ try_again:
+	/* pull chars out of the buffer */
+	ix = gdbstub_rx_outp;
+	barrier();
+	if (ix == gdbstub_rx_inp) {
+		if (nonblock)
+			return -EAGAIN;
+#ifdef CONFIG_MN10300_WD_TIMER
+	for (cpu = 0; cpu < NR_CPUS; cpu++)
+		watchdog_alert_counter[cpu] = 0;
+#endif
+		goto try_again;
+	}
+
+	ch = gdbstub_rx_buffer[ix++];
+	st = gdbstub_rx_buffer[ix++];
+	barrier();
+	gdbstub_rx_outp = ix & 0x00000fff;
+
+	if (st & UART_LSR_BI) {
+		gdbstub_proto("### GDB Rx Break Detected ###\n");
+		return -EINTR;
+	} else if (st & (UART_LSR_FE | UART_LSR_OE | UART_LSR_PE)) {
+		gdbstub_proto("### GDB Rx Error (st=%02x) ###\n", st);
+		return -EIO;
+	} else {
+		gdbstub_proto("### GDB Rx %02x (st=%02x) ###\n", ch, st);
+		*_ch = ch & 0x7f;
+		return 0;
+	}
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_char(unsigned char ch)
+{
+	FLOWCTL_SET(DTR);
+	LSR_WAIT_FOR(THRE);
+	/* FLOWCTL_WAIT_FOR(CTS); */
+
+	if (ch == 0x0a) {
+		GDBPORT_SERIAL_TX = 0x0d;
+		LSR_WAIT_FOR(THRE);
+		/* FLOWCTL_WAIT_FOR(CTS); */
+	}
+	GDBPORT_SERIAL_TX = ch;
+
+	FLOWCTL_CLEAR(DTR);
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_flush(void)
+{
+	LSR_WAIT_FOR(TEMT);
+	LSR_WAIT_FOR(THRE);
+	FLOWCTL_CLEAR(DTR);
+}