Initial import

1 files changed, 133 insertions, 0 deletions

diff --git a/arch/mn10300/proc-mn2ws0050/proc-init.c b/arch/mn10300/proc-mn2ws0050/proc-init.c
new file mode 100644
index 000000000..ee6d03dbc
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/proc-init.c
@@ -0,0 +1,133 @@
+/* MN2WS0050 processor initialisation
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <linux/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/busctl-regs.h>
+#include <unit/timex.h>
+#include <asm/fpu.h>
+#include <asm/rtc.h>
+
+#define MEMCONF __SYSREGC(0xdf800400, u32)
+
+/*
+ * initialise the on-silicon processor peripherals
+ */
+asmlinkage void __init processor_init(void)
+{
+	int loop;
+
+	/* set up the exception table first */
+	for (loop = 0x000; loop < 0x400; loop += 8)
+		__set_intr_stub(loop, __common_exception);
+
+	__set_intr_stub(EXCEP_ITLBMISS,		itlb_miss);
+	__set_intr_stub(EXCEP_DTLBMISS,		dtlb_miss);
+	__set_intr_stub(EXCEP_IAERROR,		itlb_aerror);
+	__set_intr_stub(EXCEP_DAERROR,		dtlb_aerror);
+	__set_intr_stub(EXCEP_BUSERROR,		raw_bus_error);
+	__set_intr_stub(EXCEP_DOUBLE_FAULT,	double_fault);
+	__set_intr_stub(EXCEP_FPU_DISABLED,	fpu_disabled);
+	__set_intr_stub(EXCEP_SYSCALL0,		system_call);
+
+	__set_intr_stub(EXCEP_NMI,		nmi_handler);
+	__set_intr_stub(EXCEP_WDT,		nmi_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL0,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL1,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL2,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL3,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL4,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL5,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL6,	irq_handler);
+
+	IVAR0 = EXCEP_IRQ_LEVEL0;
+	IVAR1 = EXCEP_IRQ_LEVEL1;
+	IVAR2 = EXCEP_IRQ_LEVEL2;
+	IVAR3 = EXCEP_IRQ_LEVEL3;
+	IVAR4 = EXCEP_IRQ_LEVEL4;
+	IVAR5 = EXCEP_IRQ_LEVEL5;
+	IVAR6 = EXCEP_IRQ_LEVEL6;
+
+#ifndef CONFIG_MN10300_HAS_CACHE_SNOOP
+	mn10300_dcache_flush_inv();
+	mn10300_icache_inv();
+#endif
+
+	/* disable all interrupts and set to priority 6 (lowest) */
+#ifdef	CONFIG_SMP
+	for (loop = 0; loop < GxICR_NUM_IRQS; loop++)
+		GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
+#else	/* !CONFIG_SMP */
+	for (loop = 0; loop < NR_IRQS; loop++)
+		GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
+#endif	/* !CONFIG_SMP */
+
+	/* clear the timers */
+	TM0MD	= 0;
+	TM1MD	= 0;
+	TM2MD	= 0;
+	TM3MD	= 0;
+	TM4MD	= 0;
+	TM5MD	= 0;
+	TM6MD	= 0;
+	TM6MDA	= 0;
+	TM6MDB	= 0;
+	TM7MD	= 0;
+	TM8MD	= 0;
+	TM9MD	= 0;
+	TM10MD	= 0;
+	TM11MD	= 0;
+	TM12MD	= 0;
+	TM13MD	= 0;
+	TM14MD	= 0;
+	TM15MD	= 0;
+
+	calibrate_clock();
+}
+
+/*
+ * determine the memory size and base from the memory controller regs
+ */
+void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size)
+{
+	unsigned long memconf = MEMCONF;
+	unsigned long size = 0; /* order: MByte */
+
+	*mem_base = 0x90000000; /* fixed address */
+
+	switch (memconf & 0x00000003) {
+	case 0x01:
+		size = 256 / 8;		/* 256 Mbit per chip */
+		break;
+	case 0x02:
+		size = 512 / 8;		/* 512 Mbit per chip */
+		break;
+	case 0x03:
+		size = 1024 / 8;	/*   1 Gbit per chip */
+		break;
+	default:
+		panic("Invalid SDRAM size");
+		break;
+	}
+
+	printk(KERN_INFO "DDR2-SDRAM: %luMB x 2 @%08lx\n", size, *mem_base);
+
+	*mem_size = (size * 2) << 20;
+}