Initial import

11 files changed, 1404 insertions, 0 deletions

diff --git a/arch/mn10300/unit-asb2305/Makefile b/arch/mn10300/unit-asb2305/Makefile
new file mode 100644
index 000000000..cbc5abaa9
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/Makefile
@@ -0,0 +1,8 @@
+###############################################################################
+#
+# Makefile for the ASB2305 board
+#
+###############################################################################
+obj-y   := unit-init.o leds.o
+
+obj-$(CONFIG_PCI) += pci.o pci-asb2305.o pci-irq.o
diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h
new file mode 100644
index 000000000..29e342543
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/clock.h
@@ -0,0 +1,24 @@
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#define MN10300_IOCLK		33333333UL
+/* #define MN10300_IOBCLK	66666666UL */
+
+#endif /* !__ASSEMBLY__ */
+
+#define MN10300_WDCLK		MN10300_IOCLK
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/leds.h b/arch/mn10300/unit-asb2305/include/unit/leds.h
new file mode 100644
index 000000000..bc471f617
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/leds.h
@@ -0,0 +1,51 @@
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2305_7SEGLEDS	__SYSREG(0xA6F90000, u32)
+
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset()		\
+do {						\
+	P0OUT &= 0xbf;				\
+	P0MD = (P0MD & P0MD_6) | P0MD_6_OUT;	\
+} while (0)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds			\
+	mov	0x43077f1d,d0		;	\
+	mov	d0,(ASB2305_7SEGLEDS)
+
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF)				\
+do {								\
+	ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f;	\
+} while (0)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h
new file mode 100644
index 000000000..88c082193
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/serial.h
@@ -0,0 +1,125 @@
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu-regs.h>
+#include <proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS	0xA6FB0000
+#define ASB2305_DEBUG_MCR	__SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+
+#define SERIAL_IRQ	XIRQ0	/* Dual serial (PC16552)	(Hi) */
+
+/*
+ * The ASB2305 has an 18.432 MHz clock the UART
+ */
+#define BASE_BAUD	(18432000 / 16)
+
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS						\
+	{								\
+	.baud_base		= BASE_BAUD,				\
+	.irq			= SERIAL_IRQ,				\
+	.flags			= STD_COM_FLAGS,			\
+	.iomem_base		= (u8 *) SERIAL_PORT0_BASE_ADDRESS,	\
+	.iomem_reg_shift	= 2,					\
+	.io_type		= SERIAL_IO_MEM,			\
+	},
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ	SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define TTYS0_TX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define TTYS0_MCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+
+#define LSR_WAIT_FOR(STATE)				\
+do {							\
+	while (!(TTYS0_LSR & UART_LSR_##STATE)) {}	\
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)				\
+do {							\
+	while (!(TTYS0_MSR & UART_MSR_##LINE)) {}	\
+} while (0)
+#define FLOWCTL_CLEAR(LINE)			\
+do {						\
+	TTYS0_MCR &= ~UART_MCR_##LINE;		\
+} while (0)
+#define FLOWCTL_SET(LINE)			\
+do {						\
+	TTYS0_MCR |= UART_MCR_##LINE;		\
+} while (0)
+#define FLOWCTL_QUERY(LINE)	({ TTYS0_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+	char ch;
+
+	FLOWCTL_SET(DTR);
+
+	for (; n > 0; n--) {
+		LSR_WAIT_FOR(THRE);
+		FLOWCTL_WAIT_FOR(CTS);
+
+		ch = *p++;
+		if (ch == 0x0a) {
+			TTYS0_TX = 0x0d;
+			LSR_WAIT_FOR(THRE);
+			FLOWCTL_WAIT_FOR(CTS);
+		}
+		TTYS0_TX = ch;
+	}
+
+	FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h
new file mode 100644
index 000000000..4cefc224f
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/timex.h
@@ -0,0 +1,146 @@
+/* ASB2305-specific timer specifications
+ *
+ * Copyright (C) 2007, 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#include <asm/timer-regs.h>
+#include <unit/clock.h>
+#include <asm/param.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define	TMJCBR_MAX		0xffff
+#define	TMJCIRQ			TM1IRQ
+#define	TMJCICR			TM1ICR
+
+#ifndef __ASSEMBLY__
+
+#define MN10300_SRC_IOCLK	MN10300_IOCLK
+
+#ifndef HZ
+# error HZ undeclared.
+#endif /* !HZ */
+/* use as little prescaling as possible to avoid losing accuracy */
+#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE		1
+# define JC_TIMER_CLKSRC	TM0MD_SRC_IOCLK
+# define TSC_TIMER_CLKSRC	TM4MD_SRC_IOCLK
+#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE		8
+# define JC_TIMER_CLKSRC	TM0MD_SRC_IOCLK_8
+# define TSC_TIMER_CLKSRC	TM4MD_SRC_IOCLK_8
+#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE		32
+# define JC_TIMER_CLKSRC	TM0MD_SRC_IOCLK_32
+# define TSC_TIMER_CLKSRC	TM4MD_SRC_IOCLK_32
+#else
+# error You lose.
+#endif
+
+#define MN10300_JCCLK		(MN10300_SRC_IOCLK / IOCLK_PRESCALE)
+#define MN10300_TSCCLK		(MN10300_SRC_IOCLK / IOCLK_PRESCALE)
+
+#define MN10300_JC_PER_HZ	((MN10300_JCCLK + HZ / 2) / HZ)
+#define MN10300_TSC_PER_HZ	((MN10300_TSCCLK + HZ / 2) / HZ)
+
+static inline void stop_jiffies_counter(void)
+{
+	u16 tmp;
+	TM01MD = JC_TIMER_CLKSRC | TM1MD_SRC_TM0CASCADE << 8;
+	tmp = TM01MD;
+}
+
+static inline void reload_jiffies_counter(u32 cnt)
+{
+	u32 tmp;
+
+	TM01BR = cnt;
+	tmp = TM01BR;
+
+	TM01MD = JC_TIMER_CLKSRC |		\
+		 TM1MD_SRC_TM0CASCADE << 8 |	\
+		 TM0MD_INIT_COUNTER |		\
+		 TM1MD_INIT_COUNTER << 8;
+
+
+	TM01MD = JC_TIMER_CLKSRC |		\
+		 TM1MD_SRC_TM0CASCADE << 8 |	\
+		 TM0MD_COUNT_ENABLE |		\
+		 TM1MD_COUNT_ENABLE << 8;
+
+	tmp = TM01MD;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define	TMTSCBR_MAX		0xffffffff
+#define	TMTSCBC			TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+	u32 t32;
+
+	/* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+	 * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+	 */
+	TM45BR = TMTSCBR_MAX;
+	t32 = TM45BR;
+
+	TM4MD = TSC_TIMER_CLKSRC;
+	TM4MD |= TM4MD_INIT_COUNTER;
+	TM4MD &= ~TM4MD_INIT_COUNTER;
+	TM4ICR = 0;
+	t32 = TM4ICR;
+
+	TM5MD = TM5MD_SRC_TM4CASCADE;
+	TM5MD |= TM5MD_INIT_COUNTER;
+	TM5MD &= ~TM5MD_INIT_COUNTER;
+	TM5ICR = 0;
+	t32 = TM5ICR;
+
+	TM5MD |= TM5MD_COUNT_ENABLE;
+	TM4MD |= TM4MD_COUNT_ENABLE;
+	t32 = TM5MD;
+	t32 = TM4MD;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+	u8 t8;
+	TM4MD = 0;
+	TM5MD = 0;
+	t8 = TM4MD;
+	t8 = TM5MD;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+	return (cycles_t)~TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c
new file mode 100644
index 000000000..6f8de9954
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/leds.c
@@ -0,0 +1,124 @@
+/* ASB2305 Peripheral 7-segment LEDs x4 support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
+#include <unit/leds.h>
+
+static const u8 asb2305_led_hex_tbl[16] = {
+	0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
+	0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c
+};
+
+static const u32 asb2305_led_chase_tbl[6] = {
+	~0x02020202,	/* top		- segA */
+	~0x04040404,	/* right top	- segB */
+	~0x08080808,	/* right bottom	- segC */
+	~0x10101010,	/* bottom	- segD */
+	~0x20202020,	/* left bottom	- segE */
+	~0x40404040,	/* left top	- segF */
+};
+
+static unsigned asb2305_led_chase;
+
+void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points)
+{
+	u32 leds;
+
+	leds = asb2305_led_hex_tbl[(val/1000) % 10];
+	leds <<= 8;
+	leds |= asb2305_led_hex_tbl[(val/100) % 10];
+	leds <<= 8;
+	leds |= asb2305_led_hex_tbl[(val/10) % 10];
+	leds <<= 8;
+	leds |= asb2305_led_hex_tbl[val % 10];
+	leds |= points^0x01010101;
+
+	ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points)
+{
+	u32 leds;
+
+	leds = asb2305_led_hex_tbl[(val/1000) % 10];
+	leds <<= 8;
+	leds |= asb2305_led_hex_tbl[(val/100) % 10];
+	leds <<= 8;
+	leds |= asb2305_led_hex_tbl[(val/10) % 10];
+	leds <<= 8;
+	leds |= asb2305_led_hex_tbl[val % 10];
+	leds |= points^0x01010101;
+
+	ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds_display_exception(enum exception_code code)
+{
+	u32 leds;
+
+	leds = asb2305_led_hex_tbl[(code/0x100) % 0x10];
+	leds <<= 8;
+	leds |= asb2305_led_hex_tbl[(code/0x10) % 0x10];
+	leds <<= 8;
+	leds |= asb2305_led_hex_tbl[code % 0x10];
+	leds |= 0x6d010101;
+
+	ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_minssecs(unsigned int time, unsigned int points)
+{
+	u32 leds;
+
+	leds = asb2305_led_hex_tbl[(time/600) % 6];
+	leds <<= 8;
+	leds |= asb2305_led_hex_tbl[(time/60) % 10];
+	leds <<= 8;
+	leds |= asb2305_led_hex_tbl[(time/10) % 6];
+	leds <<= 8;
+	leds |= asb2305_led_hex_tbl[time % 10];
+	leds |= points^0x01010101;
+
+	ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_rtc(void)
+{
+	unsigned int clock;
+	u8 mins, secs;
+
+	mins = RTMCR;
+	secs = RTSCR;
+
+	clock = ((mins & 0xf0) >> 4);
+	clock *= 10;
+	clock += (mins & 0x0f);
+	clock *= 6;
+
+	clock += ((secs & 0xf0) >> 4);
+	clock *= 10;
+	clock += (secs & 0x0f);
+
+	peripheral_leds7x4_display_minssecs(clock, 0);
+}
+
+void peripheral_leds_led_chase(void)
+{
+	ASB2305_7SEGLEDS = asb2305_led_chase_tbl[asb2305_led_chase];
+	asb2305_led_chase++;
+	if (asb2305_led_chase >= 6)
+		asb2305_led_chase = 0;
+}
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
new file mode 100644
index 000000000..b5b036f64
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -0,0 +1,237 @@
+/* ASB2305 PCI resource stuff
+ *
+ * Copyright (C) 2001 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/pci-i386.c
+ *   - Copyright 1997--2000 Martin Mares <mj@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include "pci-asb2305.h"
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
+{
+	resource_size_t start = res->start;
+
+#if 0
+	struct pci_dev *dev = data;
+
+	printk(KERN_DEBUG
+	       "### PCIBIOS_ALIGN_RESOURCE(%s,,{%08lx-%08lx,%08lx},%lx)\n",
+	       pci_name(dev),
+	       res->start,
+	       res->end,
+	       res->flags,
+	       size
+	       );
+#endif
+
+	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+		start = (start + 0x3ff) & ~0x3ff;
+
+	return start;
+}
+
+
+/*
+ *  Handle resources of PCI devices.  If the world were perfect, we could
+ *  just allocate all the resource regions and do nothing more.  It isn't.
+ *  On the other hand, we cannot just re-allocate all devices, as it would
+ *  require us to know lots of host bridge internals.  So we attempt to
+ *  keep as much of the original configuration as possible, but tweak it
+ *  when it's found to be wrong.
+ *
+ *  Known BIOS problems we have to work around:
+ *	- I/O or memory regions not configured
+ *	- regions configured, but not enabled in the command register
+ *	- bogus I/O addresses above 64K used
+ *	- expansion ROMs left enabled (this may sound harmless, but given
+ *	  the fact the PCI specs explicitly allow address decoders to be
+ *	  shared between expansion ROMs and other resource regions, it's
+ *	  at least dangerous)
+ *
+ *  Our solution:
+ *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ *	    This gives us fixed barriers on where we can allocate.
+ *	(2) Allocate resources for all enabled devices.  If there is
+ *	    a collision, just mark the resource as unallocated. Also
+ *	    disable expansion ROMs during this step.
+ *	(3) Try to allocate resources for disabled devices.  If the
+ *	    resources were assigned correctly, everything goes well,
+ *	    if they weren't, they won't disturb allocation of other
+ *	    resources.
+ *	(4) Assign new addresses to resources which were either
+ *	    not configured at all or misconfigured.  If explicitly
+ *	    requested by the user, configure expansion ROM address
+ *	    as well.
+ */
+static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+	struct pci_bus *bus;
+	struct pci_dev *dev;
+	int idx;
+	struct resource *r;
+
+	/* Depth-First Search on bus tree */
+	list_for_each_entry(bus, bus_list, node) {
+		dev = bus->self;
+		if (dev) {
+			for (idx = PCI_BRIDGE_RESOURCES;
+			     idx < PCI_NUM_RESOURCES;
+			     idx++) {
+				r = &dev->resource[idx];
+				if (!r->flags)
+					continue;
+				if (!r->start ||
+				    pci_claim_bridge_resource(dev, idx) < 0) {
+					printk(KERN_ERR "PCI:"
+					       " Cannot allocate resource"
+					       " region %d of bridge %s\n",
+					       idx, pci_name(dev));
+					/* Something is wrong with the region.
+					 * Invalidate the resource to prevent
+					 * child resource allocations in this
+					 * range. */
+					r->start = r->end = 0;
+					r->flags = 0;
+				}
+			}
+		}
+		pcibios_allocate_bus_resources(&bus->children);
+	}
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+	struct pci_dev *dev = NULL;
+	int idx, disabled;
+	u16 command;
+	struct resource *r;
+
+	for_each_pci_dev(dev) {
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		for (idx = 0; idx < 6; idx++) {
+			r = &dev->resource[idx];
+			if (r->parent)		/* Already allocated */
+				continue;
+			if (!r->start)		/* Address not assigned */
+				continue;
+			if (r->flags & IORESOURCE_IO)
+				disabled = !(command & PCI_COMMAND_IO);
+			else
+				disabled = !(command & PCI_COMMAND_MEMORY);
+			if (pass == disabled) {
+				DBG("PCI[%s]: Resource %08lx-%08lx"
+				    " (f=%lx, d=%d, p=%d)\n",
+				    pci_name(dev), r->start, r->end, r->flags,
+				    disabled, pass);
+				if (pci_claim_resource(dev, idx) < 0) {
+					printk(KERN_ERR "PCI:"
+					       " Cannot allocate resource"
+					       " region %d of device %s\n",
+					       idx, pci_name(dev));
+					/* We'll assign a new address later */
+					r->end -= r->start;
+					r->start = 0;
+				}
+			}
+		}
+		if (!pass) {
+			r = &dev->resource[PCI_ROM_RESOURCE];
+			if (r->flags & IORESOURCE_ROM_ENABLE) {
+				/* Turn the ROM off, leave the resource region,
+				 * but keep it unregistered. */
+				u32 reg;
+				DBG("PCI: Switching off ROM of %s\n",
+				    pci_name(dev));
+				r->flags &= ~IORESOURCE_ROM_ENABLE;
+				pci_read_config_dword(
+					dev, dev->rom_base_reg, &reg);
+				pci_write_config_dword(
+					dev, dev->rom_base_reg,
+					reg & ~PCI_ROM_ADDRESS_ENABLE);
+			}
+		}
+	}
+}
+
+static int __init pcibios_assign_resources(void)
+{
+	struct pci_dev *dev = NULL;
+	struct resource *r;
+
+	if (!(pci_probe & PCI_ASSIGN_ROMS)) {
+		/* Try to use BIOS settings for ROMs, otherwise let
+		   pci_assign_unassigned_resources() allocate the new
+		   addresses. */
+		for_each_pci_dev(dev) {
+			r = &dev->resource[PCI_ROM_RESOURCE];
+			if (!r->flags || !r->start)
+				continue;
+			if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
+				r->end -= r->start;
+				r->start = 0;
+			}
+		}
+	}
+
+	pci_assign_unassigned_resources();
+
+	return 0;
+}
+
+fs_initcall(pcibios_assign_resources);
+
+void __init pcibios_resource_survey(void)
+{
+	DBG("PCI: Allocating resources\n");
+	pcibios_allocate_bus_resources(&pci_root_buses);
+	pcibios_allocate_resources(0);
+	pcibios_allocate_resources(1);
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
+{
+	unsigned long prot;
+
+	/* Leave vm_pgoff as-is, the PCI space address is the physical
+	 * address on this platform.
+	 */
+	vma->vm_flags |= VM_LOCKED;
+
+	prot = pgprot_val(vma->vm_page_prot);
+	prot &= ~_PAGE_CACHE;
+	vma->vm_page_prot = __pgprot(prot);
+
+	/* Write-combine setting is ignored */
+	if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot))
+		return -EAGAIN;
+
+	return 0;
+}
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h
new file mode 100644
index 000000000..9e17aca5a
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.h
@@ -0,0 +1,75 @@
+/* ASB2305 Arch-specific PCI declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from: arch/i386/kernel/pci-i386.h: (c) 1999 Martin Mares <mj@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _PCI_ASB2305_H
+#define _PCI_ASB2305_H
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define PCI_PROBE_BIOS 1
+#define PCI_PROBE_CONF1 2
+#define PCI_PROBE_CONF2 4
+#define PCI_NO_CHECKS 0x400
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+
+extern unsigned int pci_probe;
+
+/* pci-asb2305.c */
+
+extern void pcibios_resource_survey(void);
+
+/* pci.c */
+
+extern struct pci_ops *pci_root_ops;
+
+extern struct irq_routing_table *pcibios_get_irq_routing_table(void);
+extern int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+
+/* pci-irq.c */
+
+struct irq_info {
+	u8 bus, devfn;			/* Bus, device and function */
+	struct {
+		u8 link;		/* IRQ line ID, chipset dependent,
+					 * 0=not routed */
+		u16 bitmap;		/* Available IRQs */
+	} __attribute__((packed)) irq[4];
+	u8 slot;			/* Slot number, 0=onboard */
+	u8 rfu;
+} __attribute__((packed));
+
+struct irq_routing_table {
+	u32 signature;			/* PIRQ_SIGNATURE should be here */
+	u16 version;			/* PIRQ_VERSION */
+	u16 size;			/* Table size in bytes */
+	u8 rtr_bus, rtr_devfn;		/* Where the interrupt router lies */
+	u16 exclusive_irqs;		/* IRQs devoted exclusively to PCI usage */
+	u16 rtr_vendor, rtr_device;	/* Vendor and device ID of interrupt router */
+	u32 miniport_data;		/* Crap */
+	u8 rfu[11];
+	u8 checksum;			/* Modulo 256 checksum must give zero */
+	struct irq_info slots[0];
+} __attribute__((packed));
+
+extern unsigned int pcibios_irq_mask;
+
+extern void pcibios_irq_init(void);
+extern void pcibios_fixup_irqs(void);
+extern void pcibios_enable_irq(struct pci_dev *dev);
+
+#endif /* PCI_ASB2305_H */
diff --git a/arch/mn10300/unit-asb2305/pci-irq.c b/arch/mn10300/unit-asb2305/pci-irq.c
new file mode 100644
index 000000000..fcb28ceb8
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci-irq.c
@@ -0,0 +1,46 @@
+/* PCI IRQ routing on the MN103E010 based ASB2305
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * This is simple: All PCI interrupts route through the CPU's XIRQ1 pin [IRQ 35]
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include "pci-asb2305.h"
+
+void __init pcibios_irq_init(void)
+{
+}
+
+void __init pcibios_fixup_irqs(void)
+{
+	struct pci_dev *dev = NULL;
+	u8 line, pin;
+
+	for_each_pci_dev(dev) {
+		pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+		if (pin) {
+			dev->irq = XIRQ1;
+			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+					      dev->irq);
+		}
+		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
+	}
+}
+
+void pcibios_enable_irq(struct pci_dev *dev)
+{
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+}
diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
new file mode 100644
index 000000000..3dfe2d31c
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci.c
@@ -0,0 +1,505 @@
+/* ASB2305 PCI support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from arch/i386/kernel/pci-pc.c
+ *	(c) 1999--2000 Martin Mares <mj@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include "pci-asb2305.h"
+
+unsigned int pci_probe = 1;
+
+struct pci_ops *pci_root_ops;
+
+/*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init().
+ */
+static struct resource pci_ioport_resource = {
+	.name	= "PCI IO",
+	.start	= 0xbe000000,
+	.end	= 0xbe03ffff,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+	.name	= "PCI mem",
+	.start	= 0xb8000000,
+	.end	= 0xbbffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+/*
+ * Functions for accessing PCI configuration space
+ */
+
+#define CONFIG_CMD(bus, devfn, where) \
+	(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+#define MEM_PAGING_REG	(*(volatile __u32 *) 0xBFFFFFF4)
+#define CONFIG_ADDRESS	(*(volatile __u32 *) 0xBFFFFFF8)
+#define CONFIG_DATAL(X)	(*(volatile __u32 *) 0xBFFFFFFC)
+#define CONFIG_DATAW(X)	(*(volatile __u16 *) (0xBFFFFFFC + ((X) & 2)))
+#define CONFIG_DATAB(X)	(*(volatile __u8  *) (0xBFFFFFFC + ((X) & 3)))
+
+#define BRIDGEREGB(X)	(*(volatile __u8  *) (0xBE040000 + (X)))
+#define BRIDGEREGW(X)	(*(volatile __u16 *) (0xBE040000 + (X)))
+#define BRIDGEREGL(X)	(*(volatile __u32 *) (0xBE040000 + (X)))
+
+static inline int __query(const struct pci_bus *bus, unsigned int devfn)
+{
+#if 0
+	return bus->number == 0 && (devfn == PCI_DEVFN(0, 0));
+	return bus->number == 1;
+	return bus->number == 0 &&
+		(devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0));
+#endif
+	return 1;
+}
+
+/*
+ *
+ */
+static int pci_ampci_read_config_byte(struct pci_bus *bus, unsigned int devfn,
+				      int where, u32 *_value)
+{
+	u32 rawval, value;
+
+	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+		value = BRIDGEREGB(where);
+		__pcbdebug("=> %02hx", &BRIDGEREGL(where), value);
+	} else {
+		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+		rawval = CONFIG_ADDRESS;
+		value = CONFIG_DATAB(where);
+		if (__query(bus, devfn))
+			__pcidebug("=> %02hx", bus, devfn, where, value);
+	}
+
+	*_value = value;
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config_word(struct pci_bus *bus, unsigned int devfn,
+				      int where, u32 *_value)
+{
+	u32 rawval, value;
+
+	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+		value = BRIDGEREGW(where);
+		__pcbdebug("=> %04hx", &BRIDGEREGL(where), value);
+	} else {
+		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+		rawval = CONFIG_ADDRESS;
+		value = CONFIG_DATAW(where);
+		if (__query(bus, devfn))
+			__pcidebug("=> %04hx", bus, devfn, where, value);
+	}
+
+	*_value = value;
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
+				       int where, u32 *_value)
+{
+	u32 rawval, value;
+
+	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+		value = BRIDGEREGL(where);
+		__pcbdebug("=> %08x", &BRIDGEREGL(where), value);
+	} else {
+		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+		rawval = CONFIG_ADDRESS;
+		value = CONFIG_DATAL(where);
+		if (__query(bus, devfn))
+			__pcidebug("=> %08x", bus, devfn, where, value);
+	}
+
+	*_value = value;
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_byte(struct pci_bus *bus, unsigned int devfn,
+				       int where, u8 value)
+{
+	u32 rawval;
+
+	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+		__pcbdebug("<= %02x", &BRIDGEREGB(where), value);
+		BRIDGEREGB(where) = value;
+	} else {
+		if (bus->number == 0 &&
+		    (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0))
+		    )
+			__pcidebug("<= %02x", bus, devfn, where, value);
+		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+		rawval = CONFIG_ADDRESS;
+		CONFIG_DATAB(where) = value;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_word(struct pci_bus *bus, unsigned int devfn,
+				       int where, u16 value)
+{
+	u32 rawval;
+
+	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+		__pcbdebug("<= %04hx", &BRIDGEREGW(where), value);
+		BRIDGEREGW(where) = value;
+	} else {
+		if (__query(bus, devfn))
+			__pcidebug("<= %04hx", bus, devfn, where, value);
+		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+		rawval = CONFIG_ADDRESS;
+		CONFIG_DATAW(where) = value;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
+					int where, u32 value)
+{
+	u32 rawval;
+
+	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+		__pcbdebug("<= %08x", &BRIDGEREGL(where), value);
+		BRIDGEREGL(where) = value;
+	} else {
+		if (__query(bus, devfn))
+			__pcidebug("<= %08x", bus, devfn, where, value);
+		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+		rawval = CONFIG_ADDRESS;
+		CONFIG_DATAL(where) = value;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config(struct pci_bus *bus, unsigned int devfn,
+				 int where, int size, u32 *val)
+{
+	switch (size) {
+	case 1:
+		return pci_ampci_read_config_byte(bus, devfn, where, val);
+	case 2:
+		return pci_ampci_read_config_word(bus, devfn, where, val);
+	case 4:
+		return pci_ampci_read_config_dword(bus, devfn, where, val);
+	default:
+		BUG();
+		return -EOPNOTSUPP;
+	}
+}
+
+static int pci_ampci_write_config(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 val)
+{
+	switch (size) {
+	case 1:
+		return pci_ampci_write_config_byte(bus, devfn, where, val);
+	case 2:
+		return pci_ampci_write_config_word(bus, devfn, where, val);
+	case 4:
+		return pci_ampci_write_config_dword(bus, devfn, where, val);
+	default:
+		BUG();
+		return -EOPNOTSUPP;
+	}
+}
+
+static struct pci_ops pci_direct_ampci = {
+	.read = pci_ampci_read_config,
+	.write = pci_ampci_write_config,
+};
+
+/*
+ * Before we decide to use direct hardware access mechanisms, we try to do some
+ * trivial checks to ensure it at least _seems_ to be working -- we just test
+ * whether bus 00 contains a host bridge (this is similar to checking
+ * techniques used in XFree86, but ours should be more reliable since we
+ * attempt to make use of direct access hints provided by the PCI BIOS).
+ *
+ * This should be close to trivial, but it isn't, because there are buggy
+ * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
+ */
+static int __init pci_sanity_check(struct pci_ops *o)
+{
+	struct pci_bus bus;		/* Fake bus and device */
+	u32 x;
+
+	bus.number = 0;
+
+	if ((!o->read(&bus, 0, PCI_CLASS_DEVICE, 2, &x) &&
+	     (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)) ||
+	    (!o->read(&bus, 0, PCI_VENDOR_ID, 2, &x) &&
+	     (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)))
+		return 1;
+
+	printk(KERN_ERR "PCI: Sanity check failed\n");
+	return 0;
+}
+
+static int __init pci_check_direct(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/*
+	 * Check if access works.
+	 */
+	if (pci_sanity_check(&pci_direct_ampci)) {
+		local_irq_restore(flags);
+		printk(KERN_INFO "PCI: Using configuration ampci\n");
+		request_mem_region(0xBE040000, 256, "AMPCI bridge");
+		request_mem_region(0xBFFFFFF4, 12, "PCI ampci");
+		request_mem_region(0xBC000000, 32 * 1024 * 1024, "PCI SRAM");
+		return 0;
+	}
+
+	local_irq_restore(flags);
+	return -ENODEV;
+}
+
+static void pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+	int idx;
+
+	if (!dev->bus)
+		return;
+
+	for (idx = 0; idx < PCI_BRIDGE_RESOURCES; idx++) {
+		struct resource *r = &dev->resource[idx];
+
+		if (!r->flags || r->parent || !r->start)
+			continue;
+
+		pci_claim_resource(dev, idx);
+	}
+}
+
+static void pcibios_fixup_bridge_resources(struct pci_dev *dev)
+{
+	int idx;
+
+	if (!dev->bus)
+		return;
+
+	for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
+		struct resource *r = &dev->resource[idx];
+
+		if (!r->flags || r->parent || !r->start)
+			continue;
+
+		pci_claim_bridge_resource(dev, idx);
+	}
+}
+
+/*
+ *  Called after each bus is probed, but before its children
+ *  are examined.
+ */
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	if (bus->self) {
+		pci_read_bridge_bases(bus);
+		pcibios_fixup_bridge_resources(bus->self);
+	}
+
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		pcibios_fixup_device_resources(dev);
+}
+
+/*
+ * Initialization. Try all known PCI access methods. Note that we support
+ * using both PCI BIOS and direct access: in such cases, we use I/O ports
+ * to access config space, but we still keep BIOS order of cards to be
+ * compatible with 2.0.X. This should go away some day.
+ */
+static int __init pcibios_init(void)
+{
+	resource_size_t io_offset, mem_offset;
+	LIST_HEAD(resources);
+	struct pci_bus *bus;
+
+	ioport_resource.start	= 0xA0000000;
+	ioport_resource.end	= 0xDFFFFFFF;
+	iomem_resource.start	= 0xA0000000;
+	iomem_resource.end	= 0xDFFFFFFF;
+
+	if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+		panic("Unable to insert PCI IOMEM resource\n");
+	if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+		panic("Unable to insert PCI IOPORT resource\n");
+
+	if (!pci_probe)
+		return 0;
+
+	if (pci_check_direct() < 0) {
+		printk(KERN_WARNING "PCI: No PCI bus detected\n");
+		return 0;
+	}
+
+	printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
+	       MEM_PAGING_REG);
+
+	io_offset = pci_ioport_resource.start -
+	    (pci_ioport_resource.start & 0x00ffffff);
+	mem_offset = pci_iomem_resource.start -
+	    ((pci_iomem_resource.start & 0x03ffffff) | MEM_PAGING_REG);
+
+	pci_add_resource_offset(&resources, &pci_ioport_resource, io_offset);
+	pci_add_resource_offset(&resources, &pci_iomem_resource, mem_offset);
+	bus = pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL, &resources);
+	if (!bus)
+		return 0;
+
+	pcibios_irq_init();
+	pcibios_fixup_irqs();
+	pcibios_resource_survey();
+	pci_bus_add_devices(bus);
+	return 0;
+}
+
+arch_initcall(pcibios_init);
+
+char *__init pcibios_setup(char *str)
+{
+	if (!strcmp(str, "off")) {
+		pci_probe = 0;
+		return NULL;
+	}
+
+	return str;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	int err;
+
+	err = pci_enable_resources(dev, mask);
+	if (err == 0)
+		pcibios_enable_irq(dev);
+	return err;
+}
+
+/*
+ * disable the ethernet chipset
+ */
+static void __init unit_disable_pcnet(struct pci_bus *bus, struct pci_ops *o)
+{
+	u32 x;
+
+	bus->number = 0;
+
+	o->read (bus, PCI_DEVFN(2, 0), PCI_VENDOR_ID,		4, &x);
+	o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND,		2, &x);
+	x |= PCI_COMMAND_MASTER |
+		PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+		PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+	o->write(bus, PCI_DEVFN(2, 0), PCI_COMMAND,		2, x);
+	o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND,		2, &x);
+	o->write(bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0,	4, 0x00030001);
+	o->read (bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0,	4, &x);
+
+#define RDP (*(volatile u32 *) 0xBE030010)
+#define RAP (*(volatile u32 *) 0xBE030014)
+#define __set_RAP(X) do { RAP = (X); x = RAP; } while (0)
+#define __set_RDP(X) do { RDP = (X); x = RDP; } while (0)
+#define __get_RDP() ({ RDP & 0xffff; })
+
+	__set_RAP(0);
+	__set_RDP(0x0004);	/* CSR0 = STOP */
+
+	__set_RAP(88);		/* check CSR88 indicates an Am79C973 */
+	BUG_ON(__get_RDP() != 0x5003);
+
+	for (x = 0; x < 100; x++)
+		asm volatile("nop");
+
+	__set_RDP(0x0004);	/* CSR0 = STOP */
+}
+
+/*
+ * initialise the unit hardware
+ */
+asmlinkage void __init unit_pci_init(void)
+{
+	struct pci_bus bus;		/* Fake bus and device */
+	struct pci_ops *o = &pci_direct_ampci;
+	u32 x;
+
+	set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_PCI_IRQ_LEVEL));
+
+	memset(&bus, 0, sizeof(bus));
+
+	MEM_PAGING_REG = 0xE8000000;
+
+	/* we need to set up the bridge _now_ or we won't be able to access the
+	 * PCI config registers
+	 */
+	BRIDGEREGW(PCI_COMMAND) |=
+		PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
+		PCI_COMMAND_MEMORY | PCI_COMMAND_IO | PCI_COMMAND_MASTER;
+	BRIDGEREGW(PCI_STATUS)		= 0xF800;
+	BRIDGEREGB(PCI_LATENCY_TIMER)	= 0x10;
+	BRIDGEREGL(PCI_BASE_ADDRESS_0)	= 0x80000000;
+	BRIDGEREGB(PCI_INTERRUPT_LINE)	= 1;
+	BRIDGEREGL(0x48)		= 0x98000000;	/* AMPCI base addr */
+	BRIDGEREGB(0x41)		= 0x00;		/* secondary bus
+							 * number */
+	BRIDGEREGB(0x42)		= 0x01;		/* subordinate bus
+							 * number */
+	BRIDGEREGB(0x44)		= 0x01;
+	BRIDGEREGL(0x50)		= 0x00000001;
+	BRIDGEREGL(0x58)		= 0x00001002;
+	BRIDGEREGL(0x5C)		= 0x00000011;
+
+	/* we also need to set up the PCI-PCI bridge */
+	bus.number = 0;
+
+	/* IO: 0x00000000-0x00020000 */
+	o->read (&bus, PCI_DEVFN(3, 0), PCI_COMMAND,		2, &x);
+	x |= PCI_COMMAND_MASTER |
+		PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+		PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+	o->write(&bus, PCI_DEVFN(3, 0), PCI_COMMAND,		2, x);
+
+	o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE,		1, &x);
+	o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16,	4, &x);
+	o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE,	4, &x);
+	o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE,	4, &x);
+
+	o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE,		1, 0x01);
+	o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE,		1, &x);
+	o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16,	4, 0x00020000);
+	o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16,	4, &x);
+	o->write(&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE,	4, 0xEBB0EA00);
+	o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE,	4, &x);
+	o->write(&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE,	4, 0xE9F0E800);
+	o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE,	4, &x);
+
+	unit_disable_pcnet(&bus, o);
+}
diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c
new file mode 100644
index 000000000..bc4adfaf8
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/unit-init.c
@@ -0,0 +1,63 @@
+/* ASB2305 Initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/serial-regs.h>
+#include <unit/serial.h>
+
+/*
+ * initialise some of the unit hardware before gdbstub is set up
+ */
+asmlinkage void __init unit_init(void)
+{
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+	/* set the 16550 interrupt line to level 3 if not being used for GDB */
+#ifdef CONFIG_EXT_SERIAL_IRQ_LEVEL
+	set_intr_level(XIRQ0, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL));
+#endif
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+}
+
+/*
+ * initialise the rest of the unit hardware after gdbstub is ready
+ */
+void __init unit_setup(void)
+{
+#ifdef CONFIG_PCI
+	unit_pci_init();
+#endif
+}
+
+/*
+ * initialise the external interrupts used by a unit of this type
+ */
+void __init unit_init_IRQ(void)
+{
+	unsigned int extnum;
+
+	for (extnum = 0; extnum < NR_XIRQS; extnum++) {
+		switch (GET_XIRQ_TRIGGER(extnum)) {
+		case XIRQ_TRIGGER_HILEVEL:
+		case XIRQ_TRIGGER_LOWLEVEL:
+			mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum));
+			break;
+		default:
+			break;
+		}
+	}
+}