Linux-libre 4.8.2-gnupck-4.8.2-gnu

10 files changed, 59 insertions, 110 deletions

diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 9627e81a6..38e3494bf 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -236,7 +236,9 @@ source "kernel/Kconfig.hz"
 config MN10300_RTC
 	bool "Using MN10300 RTC"
 	depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
-	select GENERIC_CMOS_UPDATE
+	select RTC_CLASS
+	select RTC_DRV_CMOS
+	select RTC_SYSTOHC
 	default n
 	help
 	  This option enables support for the RTC, thus enabling time to be
diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h
index ce318d5ab..36389efd4 100644
--- a/arch/mn10300/include/asm/atomic.h
+++ b/arch/mn10300/include/asm/atomic.h
@@ -84,16 +84,41 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 	return retval;							\
 }
 
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op)
+#define ATOMIC_FETCH_OP(op)						\
+static inline int atomic_fetch_##op(int i, atomic_t *v)			\
+{									\
+	int retval, status;						\
+									\
+	asm volatile(							\
+		"1:	mov	%4,(_AAR,%3)	\n"			\
+		"	mov	(_ADR,%3),%1	\n"			\
+		"	mov	%1,%0		\n"			\
+		"	" #op "	%5,%0		\n"			\
+		"	mov	%0,(_ADR,%3)	\n"			\
+		"	mov	(_ADR,%3),%0	\n"	/* flush */	\
+		"	mov	(_ASR,%3),%0	\n"			\
+		"	or	%0,%0		\n"			\
+		"	bne	1b		\n"			\
+		: "=&r"(status), "=&r"(retval), "=m"(v->counter)	\
+		: "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i)	\
+		: "memory", "cc");					\
+	return retval;							\
+}
+
+#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op)
 
 ATOMIC_OPS(add)
 ATOMIC_OPS(sub)
 
-ATOMIC_OP(and)
-ATOMIC_OP(or)
-ATOMIC_OP(xor)
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op)
+
+ATOMIC_OPS(and)
+ATOMIC_OPS(or)
+ATOMIC_OPS(xor)
 
 #undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
diff --git a/arch/mn10300/include/asm/rtc-regs.h b/arch/mn10300/include/asm/rtc-regs.h
index c42deefae..c81cacecb 100644
--- a/arch/mn10300/include/asm/rtc-regs.h
+++ b/arch/mn10300/include/asm/rtc-regs.h
@@ -75,9 +75,9 @@
 #define RTC_PORT(x)		0xd8600000
 #define RTC_ALWAYS_BCD		1	/* RTC operates in binary mode */
 
-#define CMOS_READ(addr)		__SYSREG(0xd8600000 + (addr), u8)
+#define CMOS_READ(addr)		__SYSREG(0xd8600000 + (u32)(addr), u8)
 #define CMOS_WRITE(val, addr)	\
-	do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0)
+	do { __SYSREG(0xd8600000 + (u32)(addr), u8) = val; } while (0)
 
 #define RTC_IRQ			RTIRQ
 
diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h
index 6c14bb1d0..07dc87656 100644
--- a/arch/mn10300/include/asm/rtc.h
+++ b/arch/mn10300/include/asm/rtc.h
@@ -25,6 +25,4 @@ static inline void calibrate_clock(void)
 
 #endif /* !CONFIG_MN10300_RTC */
 
-#include <asm-generic/rtc.h>
-
 #endif /* _ASM_RTC_H */
diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h
index 1ae580f38..9c7b8f794 100644
--- a/arch/mn10300/include/asm/spinlock.h
+++ b/arch/mn10300/include/asm/spinlock.h
@@ -12,6 +12,8 @@
 #define _ASM_SPINLOCK_H
 
 #include <linux/atomic.h>
+#include <asm/barrier.h>
+#include <asm/processor.h>
 #include <asm/rwlock.h>
 #include <asm/page.h>
 
@@ -23,7 +25,11 @@
  */
 
 #define arch_spin_is_locked(x)	(*(volatile signed char *)(&(x)->slock) != 0)
-#define arch_spin_unlock_wait(x) do { barrier(); } while (arch_spin_is_locked(x))
+
+static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
+{
+	smp_cond_load_acquire(&lock->slock, !VAL);
+}
 
 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c
index 48d7058b3..f81f37025 100644
--- a/arch/mn10300/kernel/rtc.c
+++ b/arch/mn10300/kernel/rtc.c
@@ -12,107 +12,19 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/mc146818rtc.h>
-#include <linux/bcd.h>
-#include <linux/timex.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
 #include <asm/rtc-regs.h>
 #include <asm/rtc.h>
 
 DEFINE_SPINLOCK(rtc_lock);
 EXPORT_SYMBOL(rtc_lock);
 
-/*
- * Read the current RTC time
- */
-void read_persistent_clock(struct timespec *ts)
-{
-	struct rtc_time tm;
-
-	get_rtc_time(&tm);
-
-	ts->tv_nsec = 0;
-	ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
-			    tm.tm_hour, tm.tm_min, tm.tm_sec);
-
-	/* if rtc is way off in the past, set something reasonable */
-	if (ts->tv_sec < 0)
-		ts->tv_sec = mktime(2009, 1, 1, 12, 0, 0);
-}
-
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500
- * ms after the second nowtime has started, because when nowtime is written
- * into the registers of the CMOS clock, it will jump to the next second
- * precisely 500 ms later.  Check the Motorola MC146818A or Dallas DS12887 data
- * sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you'll only notice that after reboot!
- */
-static int set_rtc_mmss(unsigned long nowtime)
-{
-	unsigned char save_control, save_freq_select;
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-
-	/* gets recalled with irq locally disabled */
-	spin_lock(&rtc_lock);
-	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being
-						* set */
-	CMOS_WRITE(save_control | RTC_SET, RTC_CONTROL);
-
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset
-							* prescaler */
-	CMOS_WRITE(save_freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		cmos_minutes = bcd2bin(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
-		/* correct for half hour time zone */
-		real_minutes += 30;
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			real_seconds = bin2bcd(real_seconds);
-			real_minutes = bin2bcd(real_minutes);
-		}
-		CMOS_WRITE(real_seconds, RTC_SECONDS);
-		CMOS_WRITE(real_minutes, RTC_MINUTES);
-	} else {
-		printk_once(KERN_NOTICE
-		       "set_rtc_mmss: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
-	}
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	spin_unlock(&rtc_lock);
-
-	return retval;
-}
-
-int update_persistent_clock(struct timespec now)
-{
-	return set_rtc_mmss(now.tv_sec);
-}
+static const __initdata struct resource res[] = {
+	DEFINE_RES_IO(RTC_PORT(0), RTC_IO_EXTENT),
+	DEFINE_RES_IRQ(RTC_IRQ),
+};
 
 /*
  * calibrate the TSC clock against the RTC
@@ -129,4 +41,6 @@ void __init calibrate_clock(void)
 	RTCRA |= RTCRA_DVR;
 	RTCRA &= ~RTCRA_DVR;
 	RTCRB &= ~RTCRB_SET;
+
+	platform_device_register_simple("rtc_cmos", -1, res, ARRAY_SIZE(res));
 }
diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c
index 8842394cb..4f4b9029f 100644
--- a/arch/mn10300/mm/dma-alloc.c
+++ b/arch/mn10300/mm/dma-alloc.c
@@ -21,7 +21,7 @@
 static unsigned long pci_sram_allocated = 0xbc000000;
 
 static void *mn10300_dma_alloc(struct device *dev, size_t size,
-		dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
+		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
 {
 	unsigned long addr;
 	void *ret;
@@ -63,7 +63,7 @@ done:
 }
 
 static void mn10300_dma_free(struct device *dev, size_t size, void *vaddr,
-		dma_addr_t dma_handle, struct dma_attrs *attrs)
+		dma_addr_t dma_handle, unsigned long attrs)
 {
 	unsigned long addr = (unsigned long) vaddr & ~0x20000000;
 
@@ -75,7 +75,7 @@ static void mn10300_dma_free(struct device *dev, size_t size, void *vaddr,
 
 static int mn10300_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 		int nents, enum dma_data_direction direction,
-		struct dma_attrs *attrs)
+		unsigned long attrs)
 {
 	struct scatterlist *sg;
 	int i;
@@ -92,7 +92,7 @@ static int mn10300_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 
 static dma_addr_t mn10300_dma_map_page(struct device *dev, struct page *page,
 		unsigned long offset, size_t size,
-		enum dma_data_direction direction, struct dma_attrs *attrs)
+		enum dma_data_direction direction, unsigned long attrs)
 {
 	return page_to_bus(page) + offset;
 }
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 4a1d181ed..f23781d6b 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -254,7 +254,7 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, flags);
+	fault = handle_mm_fault(vma, address, flags);
 
 	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
 		return;
diff --git a/arch/mn10300/proc-mn103e010/proc-init.c b/arch/mn10300/proc-mn103e010/proc-init.c
index 27b97980d..102d86a6a 100644
--- a/arch/mn10300/proc-mn103e010/proc-init.c
+++ b/arch/mn10300/proc-mn103e010/proc-init.c
@@ -9,7 +9,10 @@
  * 2 of the Licence, or (at your option) any later version.
  */
 #include <linux/kernel.h>
+#include <linux/irq.h>
+#include <asm/cacheflush.h>
 #include <asm/fpu.h>
+#include <asm/irq.h>
 #include <asm/rtc.h>
 #include <asm/busctl-regs.h>
 
diff --git a/arch/mn10300/proc-mn2ws0050/proc-init.c b/arch/mn10300/proc-mn2ws0050/proc-init.c
index ee6d03dbc..950cc8dbb 100644
--- a/arch/mn10300/proc-mn2ws0050/proc-init.c
+++ b/arch/mn10300/proc-mn2ws0050/proc-init.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 
+#include <asm/cacheflush.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>