Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 0 insertions, 314 deletions

diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
deleted file mode 100644
index bead2b655..000000000
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
- * MPC8568E MDS Device Tree Source
- *
- * Copyright 2007, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8568si-pre.dtsi"
-
-/ {
-	model = "MPC8568EMDS";
-	compatible = "MPC8568EMDS", "MPC85xxMDS";
-
-	aliases {
-		pci0 = &pci0;
-		pci1 = &pci1;
-		rapidio0 = &rio;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x0>;
-	};
-
-	lbc: localbus@e0005000 {
-		reg = <0x0 0xe0005000 0x0 0x1000>;
-		ranges = <0x0 0x0 0xfe000000 0x02000000
-			  0x1 0x0 0xf8000000 0x00008000
-			  0x2 0x0 0xf0000000 0x04000000
-			  0x4 0x0 0xf8008000 0x00008000
-			  0x5 0x0 0xf8010000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x02000000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-
-		bcsr@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8568mds-bcsr";
-			reg = <1 0 0x8000>;
-			ranges = <0 1 0 0x8000>;
-
-			bcsr5: gpio-controller@11 {
-				#gpio-cells = <2>;
-				compatible = "fsl,mpc8568mds-bcsr-gpio";
-				reg = <0x5 0x1>;
-				gpio-controller;
-			};
-		};
-
-		pib@4,0 {
-			compatible = "fsl,mpc8568mds-pib";
-			reg = <4 0 0x8000>;
-		};
-
-		pib@5,0 {
-			compatible = "fsl,mpc8568mds-pib";
-			reg = <5 0 0x8000>;
-		};
-	};
-
-	soc: soc8568@e0000000 {
-		ranges = <0x0 0x0 0xe0000000 0x100000>;
-
-		i2c-sleep-nexus {
-			i2c@3000 {
-				rtc@68 {
-					compatible = "dallas,ds1374";
-					reg = <0x68>;
-					interrupts = <3 1 0 0>;
-				};
-			};
-		};
-
-		enet0: ethernet@24000 {
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-		};
-
-		mdio@24520 {
-			phy0: ethernet-phy@7 {
-				interrupts = <1 1 0 0>;
-				reg = <0x7>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupts = <2 1 0 0>;
-				reg = <0x1>;
-			};
-			phy2: ethernet-phy@2 {
-				interrupts = <1 1 0 0>;
-				reg = <0x2>;
-			};
-			phy3: ethernet-phy@3 {
-				interrupts = <2 1 0 0>;
-				reg = <0x3>;
-			};
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet1: ethernet@25000 {
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy3>;
-			sleep = <&pmc 0x00000040>;
-		};
-
-		mdio@25520 {
-			tbi1: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		par_io@e0100 {
-			num-ports = <7>;
-
-			pio1: ucc_pin@01 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x4  0xa  0x1  0x0  0x2  0x0 	/* TxD0 */
-					0x4  0x9  0x1  0x0  0x2  0x0 	/* TxD1 */
-					0x4  0x8  0x1  0x0  0x2  0x0 	/* TxD2 */
-					0x4  0x7  0x1  0x0  0x2  0x0 	/* TxD3 */
-					0x4  0x17  0x1  0x0  0x2  0x0 	/* TxD4 */
-					0x4  0x16  0x1  0x0  0x2  0x0 	/* TxD5 */
-					0x4  0x15  0x1  0x0  0x2  0x0 	/* TxD6 */
-					0x4  0x14  0x1  0x0  0x2  0x0 	/* TxD7 */
-					0x4  0xf  0x2  0x0  0x2  0x0 	/* RxD0 */
-					0x4  0xe  0x2  0x0  0x2  0x0 	/* RxD1 */
-					0x4  0xd  0x2  0x0  0x2  0x0 	/* RxD2 */
-					0x4  0xc  0x2  0x0  0x2  0x0 	/* RxD3 */
-					0x4  0x1d  0x2  0x0  0x2  0x0 	/* RxD4 */
-					0x4  0x1c  0x2  0x0  0x2  0x0 	/* RxD5 */
-					0x4  0x1b  0x2  0x0  0x2  0x0 	/* RxD6 */
-					0x4  0x1a  0x2  0x0  0x2  0x0 	/* RxD7 */
-					0x4  0xb  0x1  0x0  0x2  0x0 	/* TX_EN */
-					0x4  0x18  0x1  0x0  0x2  0x0 	/* TX_ER */
-					0x4  0x10  0x2  0x0  0x2  0x0 	/* RX_DV */
-					0x4  0x1e  0x2  0x0  0x2  0x0 	/* RX_ER */
-					0x4  0x11  0x2  0x0  0x2  0x0 	/* RX_CLK */
-					0x4  0x13  0x1  0x0  0x2  0x0 	/* GTX_CLK */
-					0x1  0x1f  0x2  0x0  0x3  0x0>;	/* GTX125 */
-			};
-
-			pio2: ucc_pin@02 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
-					0x5  0x9 0x1  0x0  0x2  0x0   /* TxD1 */
-					0x5  0x8 0x1  0x0  0x2  0x0   /* TxD2 */
-					0x5  0x7 0x1  0x0  0x2  0x0   /* TxD3 */
-					0x5  0x17 0x1  0x0  0x2  0x0   /* TxD4 */
-					0x5  0x16 0x1  0x0  0x2  0x0   /* TxD5 */
-					0x5  0x15 0x1  0x0  0x2  0x0   /* TxD6 */
-					0x5  0x14 0x1  0x0  0x2  0x0   /* TxD7 */
-					0x5  0xf 0x2  0x0  0x2  0x0   /* RxD0 */
-					0x5  0xe 0x2  0x0  0x2  0x0   /* RxD1 */
-					0x5  0xd 0x2  0x0  0x2  0x0   /* RxD2 */
-					0x5  0xc 0x2  0x0  0x2  0x0   /* RxD3 */
-					0x5  0x1d 0x2  0x0  0x2  0x0   /* RxD4 */
-					0x5  0x1c 0x2  0x0  0x2  0x0   /* RxD5 */
-					0x5  0x1b 0x2  0x0  0x2  0x0   /* RxD6 */
-					0x5  0x1a 0x2  0x0  0x2  0x0   /* RxD7 */
-					0x5  0xb 0x1  0x0  0x2  0x0   /* TX_EN */
-					0x5  0x18 0x1  0x0  0x2  0x0   /* TX_ER */
-					0x5  0x10 0x2  0x0  0x2  0x0   /* RX_DV */
-					0x5  0x1e 0x2  0x0  0x2  0x0   /* RX_ER */
-					0x5  0x11 0x2  0x0  0x2  0x0   /* RX_CLK */
-					0x5  0x13 0x1  0x0  0x2  0x0   /* GTX_CLK */
-					0x1  0x1f 0x2  0x0  0x3  0x0   /* GTX125 */
-					0x4  0x6 0x3  0x0  0x2  0x0   /* MDIO */
-					0x4  0x5 0x1  0x0  0x2  0x0>; /* MDC */
-			};
-		};
-	};
-
-	qe: qe@e0080000 {
-		ranges = <0x0 0x0 0xe0080000 0x40000>;
-		reg = <0x0 0xe0080000 0x0 0x480>;
-
-		spi@4c0 {
-			mode = "cpu";
-		};
-
-		spi@500 {
-			mode = "cpu";
-		};
-
-		enet2: ucc@2000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk16";
-			pio-handle = <&pio1>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		enet3: ucc@3000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk16";
-			pio-handle = <&pio2>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		mdio@2120 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2120 0x18>;
-			compatible = "fsl,ucc-mdio";
-
-			/* These are the same PHYs as on
-			 * gianfar's MDIO bus */
-			qe_phy0: ethernet-phy@07 {
-				interrupt-parent = <&mpic>;
-				interrupts = <1 1 0 0>;
-				reg = <0x7>;
-			};
-			qe_phy1: ethernet-phy@01 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1 0 0>;
-				reg = <0x1>;
-			};
-			qe_phy2: ethernet-phy@02 {
-				interrupt-parent = <&mpic>;
-				interrupts = <1 1 0 0>;
-				reg = <0x2>;
-			};
-			qe_phy3: ethernet-phy@03 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1 0 0>;
-				reg = <0x3>;
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		reg = <0x0 0xe0008000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x12 AD18 */
-			0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
-			0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
-			0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
-			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
-
-			/* IDSEL 0x13 AD19 */
-			0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
-			0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
-			0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
-			0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
-	};
-
-	/* PCI Express */
-	pci1: pcie@e000a000 {
-		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
-		reg = <0x0 0xe000a000 0x0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x10000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x800000>;
-		};
-	};
-
-	rio: rapidio@e00c00000 {
-		reg = <0x0 0xe00c0000 0x0 0x20000>;
-		port1 {
-			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		green {
-			gpios = <&bcsr5 1 0>;
-		};
-
-		amber {
-			gpios = <&bcsr5 2 0>;
-		};
-
-		red {
-			gpios = <&bcsr5 3 0>;
-		};
-	};
-};
-
-/include/ "fsl/mpc8568si-post.dtsi"