Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 0 insertions, 151 deletions

diff --git a/arch/powerpc/boot/dts/p1020mbg-pc.dtsi b/arch/powerpc/boot/dts/p1020mbg-pc.dtsi
deleted file mode 100644
index a24699cfe..000000000
--- a/arch/powerpc/boot/dts/p1020mbg-pc.dtsi
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x4000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* 128KB for DTB Image */
-			reg = <0x0 0x00020000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@20000 {
-			/* 3.875 MB for Linux Kernel Image */
-			reg = <0x00020000 0x003e0000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@400000 {
-			/* 58MB for Root file System */
-			reg = <0x00400000 0x03a00000>;
-			label = "NOR Root File System";
-		};
-
-		partition@3e00000 {
-			/* This location must not be altered  */
-			/* 1M for Vitesse 7385 Switch firmware */
-			reg = <0x3e00000 0x00100000>;
-			label = "NOR Vitesse-7385 Firmware";
-			read-only;
-		};
-
-		partition@3f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x03f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-			read-only;
-		};
-	};
-
-	L2switch@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "vitesse-7385";
-		reg = <0x2 0x0 0x20000>;
-	};
-};
-
-&soc {
-	i2c@3000 {
-		rtc@68 {
-			compatible = "dallas,ds1339";
-			reg = <0x68>;
-		};
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupts = <3 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <2 1 0 0>;
-			reg = <0x1>;
-		};
-	};
-
-	mdio@25000 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26000 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		fixed-link = <1 1 1000 0 0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi1>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet2: ethernet@b2000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	/* USB2 is shared with localbus, so it must be disabled
-	   by default. We can't put 'status = "disabled";' here
-	   since U-Boot doesn't clear the status property when
-	   it enables USB2. OTOH, U-Boot does create a new node
-	   when there isn't any. So, just comment it out.
-	*/
-	usb@23000 {
-		status = "disabled";
-		phy_type = "ulpi";
-	};
-};