Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 0 insertions, 246 deletions

diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi
deleted file mode 100644
index 1fb7e0e09..000000000
--- a/arch/powerpc/boot/dts/p1020rdb.dtsi
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x1000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 256KB for Vitesse 7385 Switch firmware */
-			reg = <0x0 0x00040000>;
-			label = "NOR (RO) Vitesse-7385 Firmware";
-			read-only;
-		};
-
-		partition@40000 {
-			/* 256KB for DTB Image */
-			reg = <0x00040000 0x00040000>;
-			label = "NOR (RO) DTB Image";
-			read-only;
-		};
-
-		partition@80000 {
-			/* 3.5 MB for Linux Kernel Image */
-			reg = <0x00080000 0x00380000>;
-			label = "NOR (RO) Linux Kernel Image";
-			read-only;
-		};
-
-		partition@400000 {
-			/* 11MB for JFFS2 based Root file System */
-			reg = <0x00400000 0x00b00000>;
-			label = "NOR (RW) JFFS2 Root File System";
-		};
-
-		partition@f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x00f00000 0x00100000>;
-			label = "NOR (RO) U-Boot Image";
-			read-only;
-		};
-	};
-
-	nand@1,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,p1020-fcm-nand",
-			     "fsl,elbc-fcm-nand";
-		reg = <0x1 0x0 0x40000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 1MB for u-boot Bootloader Image */
-			reg = <0x0 0x00100000>;
-			label = "NAND (RO) U-Boot Image";
-			read-only;
-		};
-
-		partition@100000 {
-			/* 1MB for DTB Image */
-			reg = <0x00100000 0x00100000>;
-			label = "NAND (RO) DTB Image";
-			read-only;
-		};
-
-		partition@200000 {
-			/* 4MB for Linux Kernel Image */
-			reg = <0x00200000 0x00400000>;
-			label = "NAND (RO) Linux Kernel Image";
-			read-only;
-		};
-
-		partition@600000 {
-			/* 4MB for Compressed Root file System Image */
-			reg = <0x00600000 0x00400000>;
-			label = "NAND (RO) Compressed RFS Image";
-			read-only;
-		};
-
-		partition@a00000 {
-			/* 7MB for JFFS2 based Root file System */
-			reg = <0x00a00000 0x00700000>;
-			label = "NAND (RW) JFFS2 Root File System";
-		};
-
-		partition@1100000 {
-			/* 15MB for JFFS2 based Root file System */
-			reg = <0x01100000 0x00f00000>;
-			label = "NAND (RW) Writable User area";
-		};
-	};
-
-	L2switch@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "vitesse-7385";
-		reg = <0x2 0x0 0x20000>;
-	};
-};
-
-&board_soc {
-	i2c@3000 {
-		rtc@68 {
-			compatible = "dallas,ds1339";
-			reg = <0x68>;
-		};
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <40000000>; /* input clock */
-
-			partition@u-boot {
-				/* 512KB for u-boot Bootloader Image */
-				reg = <0x0 0x00080000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@dtb {
-				/* 512KB for DTB Image */
-				reg = <0x00080000 0x00080000>;
-				label = "dtb";
-				read-only;
-			};
-
-			partition@kernel {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00100000 0x00400000>;
-				label = "kernel";
-				read-only;
-			};
-
-			partition@fs {
-				/* 4MB for Compressed RFS Image */
-				reg = <0x00500000 0x00400000>;
-				label = "file system";
-				read-only;
-			};
-
-			partition@jffs-fs {
-				/* 7MB for JFFS2 based RFS */
-				reg = <0x00900000 0x00700000>;
-				label = "file system jffs2";
-			};
-		};
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-		dr_mode = "host";
-	};
-
-	/* USB2 is shared with localbus. It is used
-	   only in case of SPI and SD boot after
-	   appropriate device-tree fixup done by uboot */
-	usb@23000 {
-		phy_type = "ulpi";
-		dr_mode = "host";
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupt-parent = <&mpic>;
-			interrupts = <3 1>;
-			reg = <0x0>;
-		};
-
-		phy1: ethernet-phy@1 {
-			interrupt-parent = <&mpic>;
-			interrupts = <2 1>;
-			reg = <0x1>;
-		};
-
-		tbi-phy@2 {
-			device_type = "tbi-phy";
-			reg = <0x2>;
-		};
-	};
-
-	mdio@25000 {
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		fixed-link = <1 1 1000 0 0>;
-		phy-connection-type = "rgmii-id";
-
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi0>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet2: ethernet@b2000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};