Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 0 insertions, 323 deletions

diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
deleted file mode 100644
index 76559044d..000000000
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * P1021 MDS Device Tree Source
- *
- * Copyright 2010,2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p1021si-pre.dtsi"
-/ {
-	model = "fsl,P1021";
-	compatible = "fsl,P1021MDS";
-
-	aliases {
-		ethernet3 = &enet3;
-		ethernet4 = &enet4;
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0x0 0xffe05000 0x0 0x1000>;
-
-		/* NAND Flash, BCSR, PMC0/1*/
-		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
-			  0x1 0x0 0x0 0xf8000000 0x00008000
-			  0x2 0x0 0x0 0xf8010000 0x00020000
-			  0x3 0x0 0x0 0xf8020000 0x00020000>;
-
-		nand@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1021-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x0 0x0 0x40000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND (RO) U-Boot Image";
-				read-only;
-			};
-
-			partition@100000 {
-				/* 1MB for DTB Image */
-				reg = <0x00100000 0x00100000>;
-				label = "NAND (RO) DTB Image";
-				read-only;
-			};
-
-			partition@200000 {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00200000 0x00400000>;
-				label = "NAND (RO) Linux Kernel Image";
-				read-only;
-			};
-
-			partition@600000 {
-				/* 5MB for Compressed Root file System Image */
-				reg = <0x00600000 0x00500000>;
-				label = "NAND (RO) Compressed RFS Image";
-				read-only;
-			};
-
-			partition@b00000 {
-				/* 6MB for JFFS2 based Root file System */
-				reg = <0x00a00000 0x00600000>;
-				label = "NAND (RW) JFFS2 Root File System";
-			};
-
-			partition@1100000 {
-				/* 14MB for JFFS2 based Root file System */
-				reg = <0x01100000 0x00e00000>;
-				label = "NAND (RW) Writable User area";
-			};
-
-			partition@1f00000 {
-				/* 1MB for microcode */
-				reg = <0x01f00000 0x00100000>;
-				label = "NAND (RO) QE Ucode";
-				read-only;
-			};
-		};
-
-		bcsr@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1021mds-bcsr";
-			reg = <1 0 0x8000>;
-			ranges = <0 1 0 0x8000>;
-		};
-
-		pib@2,0 {
-			compatible = "fsl,p1021mds-pib";
-			reg = <2 0 0x10000>;
-		};
-
-		pib@3,0 {
-			compatible = "fsl,p1021mds-pib";
-			reg = <3 0 0x10000>;
-		};
-	};
-
-	soc: soc@ffe00000 {
-		compatible = "fsl,p1021-immr", "simple-bus";
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-		};
-
-		spi@7000 {
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-
-				partition@u-boot {
-					label = "u-boot-spi";
-					reg = <0x00000000 0x00100000>;
-					read-only;
-				};
-				partition@kernel {
-					label = "kernel-spi";
-					reg = <0x00100000 0x00500000>;
-					read-only;
-				};
-				partition@dtb {
-					label = "dtb-spi";
-					reg = <0x00600000 0x00100000>;
-					read-only;
-				};
-				partition@fs {
-					label = "file system-spi";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-		};
-
-		usb@22000 {
-			phy_type = "ulpi";
-			dr_mode = "host";
-		};
-
-		mdio@24000 {
-			phy0: ethernet-phy@0 {
-				interrupts = <1 1 0 0>;
-				reg = <0x0>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupts = <2 1 0 0>;
-				reg = <0x1>;
-			};
-			phy4: ethernet-phy@4 {
-				reg = <0x4>;
-			};
-			tbi-phy@5 {
-				device_type = "tbi-phy";
-				reg = <0x5>;
-			};
-		};
-
-		mdio@25000 {
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		ethernet@b0000 {
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		ethernet@b1000 {
-			phy-handle = <&phy4>;
-			tbi-handle = <&tbi0>;
-			phy-connection-type = "sgmii";
-		};
-
-		ethernet@b2000 {
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		par_io@e0100 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xe0100 0x60>;
-			ranges = <0x0 0xe0100 0x60>;
-			device_type = "par_io";
-			num-ports = <3>;
-			pio1: ucc_pin@01 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
-					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
-					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
-					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
-					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
-					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
-					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
-					0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
-					0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
-					0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
-					0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
-					0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
-					0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
-					0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
-					0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
-					0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
-					0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
-					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
-			};
-
-			pio2: ucc_pin@02 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
-					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
-					0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
-					0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
-					0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
-					0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
-					0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
-					0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
-					0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
-					0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
-			};
-		};
-	};
-
-	pci0: pcie@ffe09000 {
-		reg = <0 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	qe: qe@ffe80000 {
-		ranges = <0x0 0x0 0xffe80000 0x40000>;
-		reg = <0 0xffe80000 0 0x480>;
-		brg-frequency = <0>;
-		bus-frequency = <0>;
-		status = "disabled"; /* no firmware loaded */
-
-		enet3: ucc@2000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "clk12";
-			tx-clock-name = "clk9";
-			pio-handle = <&pio1>;
-			phy-handle = <&qe_phy0>;
-			phy-connection-type = "mii";
-		};
-
-		mdio@2120 {
-			qe_phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <4 1 0 0>;
-				reg = <0x0>;
-			};
-			qe_phy1: ethernet-phy@03 {
-				interrupt-parent = <&mpic>;
-				interrupts = <5 1 0 0>;
-				reg = <0x3>;
-			};
-			tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet4: ucc@2400 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk13";
-			pio-handle = <&pio2>;
-			phy-handle = <&qe_phy1>;
-			phy-connection-type = "rmii";
-		};
-	};
-};
-
-/include/ "fsl/p1021si-post.dtsi"