Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 0 insertions, 326 deletions

diff --git a/arch/powerpc/boot/dts/p1025rdb.dtsi b/arch/powerpc/boot/dts/p1025rdb.dtsi
deleted file mode 100644
index f50256482..000000000
--- a/arch/powerpc/boot/dts/p1025rdb.dtsi
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x1000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 256KB for Vitesse 7385 Switch firmware */
-			reg = <0x0 0x00040000>;
-			label = "NOR Vitesse-7385 Firmware";
-			read-only;
-		};
-
-		partition@40000 {
-			/* 256KB for DTB Image */
-			reg = <0x00040000 0x00040000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@80000 {
-			/* 3.5 MB for Linux Kernel Image */
-			reg = <0x00080000 0x00380000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@400000 {
-			/* 11MB for JFFS2 based Root file System */
-			reg = <0x00400000 0x00b00000>;
-			label = "NOR JFFS2 Root File System";
-		};
-
-		partition@f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x00f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-			read-only;
-		};
-	};
-
-	nand@1,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,p1025-fcm-nand",
-			     "fsl,elbc-fcm-nand";
-		reg = <0x1 0x0 0x40000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 1MB for u-boot Bootloader Image */
-			reg = <0x0 0x00100000>;
-			label = "NAND U-Boot Image";
-			read-only;
-		};
-
-		partition@100000 {
-			/* 1MB for DTB Image */
-			reg = <0x00100000 0x00100000>;
-			label = "NAND DTB Image";
-		};
-
-		partition@200000 {
-			/* 4MB for Linux Kernel Image */
-			reg = <0x00200000 0x00400000>;
-			label = "NAND Linux Kernel Image";
-		};
-
-		partition@600000 {
-			/* 4MB for Compressed Root file System Image */
-			reg = <0x00600000 0x00400000>;
-			label = "NAND Compressed RFS Image";
-		};
-
-		partition@a00000 {
-			/* 7MB for JFFS2 based Root file System */
-			reg = <0x00a00000 0x00700000>;
-			label = "NAND JFFS2 Root File System";
-		};
-
-		partition@1100000 {
-			/* 15MB for JFFS2 based Root file System */
-			reg = <0x01100000 0x00f00000>;
-			label = "NAND Writable User area";
-		};
-	};
-
-};
-
-&soc {
-	i2c@3000 {
-		rtc@68 {
-			compatible = "dallas,ds1339";
-			reg = <0x68>;
-		};
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <40000000>; /* input clock */
-
-			partition@u-boot {
-				/* 512KB for u-boot Bootloader Image */
-				reg = <0x0 0x00080000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@dtb {
-				/* 512KB for DTB Image */
-				reg = <0x00080000 0x00080000>;
-				label = "dtb";
-			};
-
-			partition@kernel {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00100000 0x00400000>;
-				label = "kernel";
-			};
-
-			partition@fs {
-				/* 4MB for Compressed RFS Image */
-				reg = <0x00500000 0x00400000>;
-				label = "file system";
-			};
-
-			partition@jffs-fs {
-				/* 7MB for JFFS2 based RFS */
-				reg = <0x00900000 0x00700000>;
-				label = "file system jffs2";
-			};
-		};
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	/* USB2 is shared with localbus, so it must be disabled
-	   by default. We can't put 'status = "disabled";' here
-	   since U-Boot doesn't clear the status property when
-	   it enables USB2. OTOH, U-Boot does create a new node
-	   when there isn't any. So, just comment it out.
-	usb@23000 {
-		phy_type = "ulpi";
-	};
-	*/
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupt-parent = <&mpic>;
-			interrupts = <3 1>;
-			reg = <0x0>;
-		};
-
-		phy1: ethernet-phy@1 {
-			interrupt-parent = <&mpic>;
-			interrupts = <2 1>;
-			reg = <0x1>;
-		};
-
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@25000 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26000 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		fixed-link = <1 1 1000 0 0>;
-		phy-connection-type = "rgmii-id";
-
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi1>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet2: ethernet@b2000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	par_io@e0100 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xe0100 0x60>;
-		ranges = <0x0 0xe0100 0x60>;
-		device_type = "par_io";
-		num-ports = <3>;
-		pio1: ucc_pin@01 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
-				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
-				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
-				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
-				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
-				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
-				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
-				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
-				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
-				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
-				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
-				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
-				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
-				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
-				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
-				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
-				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
-				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
-		};
-
-		pio2: ucc_pin@02 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
-				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
-				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
-				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
-				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
-				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
-				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
-				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
-				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
-				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
-		};
-
-		pio3: ucc_pin@03 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
-				0x0  0x12 0x2  0x0  0x2  0x0    /* SER7_CTS_B*/
-				0x0  0x13 0x1  0x0  0x2  0x0    /* SER7_RTS_B*/
-				0x0  0x14 0x2  0x0  0x2  0x0    /* SER7_RXD0*/
-				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
-		};
-
-		pio4: ucc_pin@04 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
-				0x0  0x1c 0x2  0x0  0x2  0x0    /* SER3_CTS_B*/
-				0x0  0x1d 0x1  0x0  0x2  0x0    /* SER3_RTS_B*/
-				0x0  0x1e 0x2  0x0  0x2  0x0    /* SER3_RXD0*/
-				0x0  0x1f 0x1  0x0  0x2  0x0>;    /* SER3_TXD0*/
-		};
-	};
-};
-
-&qe {
-	serial2: ucc@2600 {
-		device_type = "serial";
-		compatible = "ucc_uart";
-		port-number = <0>;
-		rx-clock-name = "brg6";
-		tx-clock-name = "brg6";
-		pio-handle = <&pio3>;
-	};
-
-	serial3: ucc@2200 {
-		device_type = "serial";
-		compatible = "ucc_uart";
-		port-number = <1>;
-		rx-clock-name = "brg2";
-		tx-clock-name = "brg2";
-		pio-handle = <&pio4>;
-	};
-};