Linux-libre 4.5-gnu

64 files changed, 2403 insertions, 2938 deletions

diff --git a/arch/powerpc/include/asm/barrier.h b/arch/powerpc/include/asm/barrier.h
index 0eca6efc0..c0deafc21 100644
--- a/arch/powerpc/include/asm/barrier.h
+++ b/arch/powerpc/include/asm/barrier.h
@@ -34,8 +34,6 @@
 #define rmb()  __asm__ __volatile__ ("sync" : : : "memory")
 #define wmb()  __asm__ __volatile__ ("sync" : : : "memory")
 
-#define smp_store_mb(var, value)	do { WRITE_ONCE(var, value); mb(); } while (0)
-
 #ifdef __SUBARCH_HAS_LWSYNC
 #    define SMPWMB      LWSYNC
 #else
@@ -46,22 +44,11 @@
 #define dma_rmb()	__lwsync()
 #define dma_wmb()	__asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
 
-#ifdef CONFIG_SMP
-#define smp_lwsync()	__lwsync()
-
-#define smp_mb()	mb()
-#define smp_rmb()	__lwsync()
-#define smp_wmb()	__asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
-#else
-#define smp_lwsync()	barrier()
+#define __smp_lwsync()	__lwsync()
 
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#endif /* CONFIG_SMP */
-
-#define read_barrier_depends()		do { } while (0)
-#define smp_read_barrier_depends()	do { } while (0)
+#define __smp_mb()	mb()
+#define __smp_rmb()	__lwsync()
+#define __smp_wmb()	__asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
 
 /*
  * This is a barrier which prevents following instructions from being
@@ -72,23 +59,23 @@
 #define data_barrier(x)	\
 	asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
 
-#define smp_store_release(p, v)						\
+#define __smp_store_release(p, v)						\
 do {									\
 	compiletime_assert_atomic_type(*p);				\
-	smp_lwsync();							\
+	__smp_lwsync();							\
 	WRITE_ONCE(*p, v);						\
 } while (0)
 
-#define smp_load_acquire(p)						\
+#define __smp_load_acquire(p)						\
 ({									\
 	typeof(*p) ___p1 = READ_ONCE(*p);				\
 	compiletime_assert_atomic_type(*p);				\
-	smp_lwsync();							\
+	__smp_lwsync();							\
 	___p1;								\
 })
 
-#define smp_mb__before_atomic()     smp_mb()
-#define smp_mb__after_atomic()      smp_mb()
 #define smp_mb__before_spinlock()   smp_mb()
 
+#include <asm-generic/barrier.h>
+
 #endif /* _ASM_POWERPC_BARRIER_H */
diff --git a/arch/powerpc/include/asm/pte-hash32.h b/arch/powerpc/include/asm/book3s/32/hash.h
index 62cfb0c66..264b754d6 100644
--- a/arch/powerpc/include/asm/pte-hash32.h
+++ b/arch/powerpc/include/asm/book3s/32/hash.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_HASH32_H
-#define _ASM_POWERPC_PTE_HASH32_H
+#ifndef _ASM_POWERPC_BOOK3S_32_HASH_H
+#define _ASM_POWERPC_BOOK3S_32_HASH_H
 #ifdef __KERNEL__
 
 /*
@@ -43,4 +43,4 @@
 #define PTE_ATOMIC_UPDATES	1
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_HASH32_H */
+#endif /* _ASM_POWERPC_BOOK3S_32_HASH_H */
diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
new file mode 100644
index 000000000..38b33dcfc
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -0,0 +1,482 @@
+#ifndef _ASM_POWERPC_BOOK3S_32_PGTABLE_H
+#define _ASM_POWERPC_BOOK3S_32_PGTABLE_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#include <asm/book3s/32/hash.h>
+
+/* And here we include common definitions */
+#include <asm/pte-common.h>
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
+ *
+ * For any >32-bit physical address platform, we can use the following
+ * two level page table layout where the pgdir is 8KB and the MS 13 bits
+ * are an index to the second level table.  The combined pgdir/pmd first
+ * level has 2048 entries and the second level has 512 64-bit PTE entries.
+ * -Matt
+ */
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + PTE_SHIFT)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+#define PTRS_PER_PTE	(1 << PTE_SHIFT)
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+/*
+ * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
+ * value (for now) on others, from where we can start layout kernel
+ * virtual space that goes below PKMAP and FIXMAP
+ */
+#ifdef CONFIG_HIGHMEM
+#define KVIRT_TOP	PKMAP_BASE
+#else
+#define KVIRT_TOP	(0xfe000000UL)	/* for now, could be FIXMAP_BASE ? */
+#endif
+
+/*
+ * ioremap_bot starts at that address. Early ioremaps move down from there,
+ * until mem_init() at which point this becomes the top of the vmalloc
+ * and ioremap space
+ */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define IOREMAP_TOP	((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK)
+#else
+#define IOREMAP_TOP	KVIRT_TOP
+#endif
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 16MB value just means that there will be a 64MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * We no longer map larger than phys RAM with the BATs so we don't have
+ * to worry about the VMALLOC_OFFSET causing problems.  We do have to worry
+ * about clashes between our early calls to ioremap() that start growing down
+ * from ioremap_base being run into the VM area allocations (growing upwards
+ * from VMALLOC_START).  For this reason we have ioremap_bot to check when
+ * we actually run into our mappings setup in the early boot with the VM
+ * system.  This really does become a problem for machines with good amounts
+ * of RAM.  -- Cort
+ */
+#define VMALLOC_OFFSET (0x1000000) /* 16M */
+#ifdef PPC_PIN_SIZE
+#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#else
+#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#endif
+#define VMALLOC_END	ioremap_bot
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/io.h>			/* For sub-arch specific PPC_PIN_SIZE */
+
+extern unsigned long ioremap_bot;
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_SHIFT)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << (32 - PGDIR_SHIFT))
+
+#define pte_ERROR(e) \
+	pr_err("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
+		(unsigned long long)pte_val(e))
+#define pgd_ERROR(e) \
+	pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+/*
+ * Bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible.
+ */
+
+#define pte_clear(mm, addr, ptep) \
+	do { pte_update(ptep, ~_PAGE_HASHPTE, 0); } while (0)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		(pmd_val(pmd) & _PMD_BAD)
+#define	pmd_present(pmd)	(pmd_val(pmd) & _PMD_PRESENT_MASK)
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	*pmdp = __pmd(0);
+}
+
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry.  flush_hash_pages is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_pages(unsigned context, unsigned long va,
+			    unsigned long pmdval, int count);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va,
+			  unsigned long pmdval);
+
+/* Flush an entry from the TLB/hash table */
+extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
+			     unsigned long address);
+
+/*
+ * PTE updates. This function is called whenever an existing
+ * valid PTE is updated. This does -not- include set_pte_at()
+ * which nowadays only sets a new PTE.
+ *
+ * Depending on the type of MMU, we may need to use atomic updates
+ * and the PTE may be either 32 or 64 bit wide. In the later case,
+ * when using atomic updates, only the low part of the PTE is
+ * accessed atomically.
+ *
+ * In addition, on 44x, we also maintain a global flag indicating
+ * that an executable user mapping was modified, which is needed
+ * to properly flush the virtually tagged instruction cache of
+ * those implementations.
+ */
+#ifndef CONFIG_PTE_64BIT
+static inline unsigned long pte_update(pte_t *p,
+				       unsigned long clr,
+				       unsigned long set)
+{
+	unsigned long old, tmp;
+
+	__asm__ __volatile__("\
+1:	lwarx	%0,0,%3\n\
+	andc	%1,%0,%4\n\
+	or	%1,%1,%5\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%3\n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" (p), "r" (clr), "r" (set), "m" (*p)
+	: "cc" );
+
+	return old;
+}
+#else /* CONFIG_PTE_64BIT */
+static inline unsigned long long pte_update(pte_t *p,
+					    unsigned long clr,
+					    unsigned long set)
+{
+	unsigned long long old;
+	unsigned long tmp;
+
+	__asm__ __volatile__("\
+1:	lwarx	%L0,0,%4\n\
+	lwzx	%0,0,%3\n\
+	andc	%1,%L0,%5\n\
+	or	%1,%1,%6\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%4\n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
+	: "cc" );
+
+	return old;
+}
+#endif /* CONFIG_PTE_64BIT */
+
+/*
+ * 2.6 calls this without flushing the TLB entry; this is wrong
+ * for our hash-based implementation, we fix that up here.
+ */
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+	old = pte_update(ptep, _PAGE_ACCESSED, 0);
+	if (old & _PAGE_HASHPTE) {
+		unsigned long ptephys = __pa(ptep) & PAGE_MASK;
+		flush_hash_pages(context, addr, ptephys, 1);
+	}
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
+	__ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+				       pte_t *ptep)
+{
+	return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pte_t *ptep)
+{
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), _PAGE_RO);
+}
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
+{
+	unsigned long set = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
+	unsigned long clr = ~pte_val(entry) & _PAGE_RO;
+
+	pte_update(ptep, clr, set);
+}
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
+
+/*
+ * Note that on Book E processors, the pmd contains the kernel virtual
+ * (lowmem) address of the pte page.  The physical address is less useful
+ * because everything runs with translation enabled (even the TLB miss
+ * handler).  On everything else the pmd contains the physical address
+ * of the pte page.  -- paulus
+ */
+#ifndef CONFIG_BOOKE
+#define pmd_page_vaddr(pmd)	\
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+#else
+#define pmd_page_vaddr(pmd)	\
+	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+#endif
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address)	 ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)		\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr)	\
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr)		\
+	((pte_t *) kmap_atomic(pmd_page(*(dir))) + pte_index(addr))
+#define pte_unmap(pte)		kunmap_atomic(pte)
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit or the _PAGE_HASHPTE bit (if used).
+ *   -- paulus
+ */
+#define __swp_type(entry)		((entry).val & 0x1f)
+#define __swp_offset(entry)		((entry).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t) { (type) | ((offset) << 5) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 3 })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 3 })
+
+#ifndef CONFIG_PPC_4K_PAGES
+void pgtable_cache_init(void);
+#else
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+#endif
+
+extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
+		      pmd_t **pmdp);
+
+/* Generic accessors to PTE bits */
+static inline int pte_write(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_RW);}
+static inline int pte_dirty(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_DIRTY); }
+static inline int pte_young(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_ACCESSED); }
+static inline int pte_special(pte_t pte)	{ return !!(pte_val(pte) & _PAGE_SPECIAL); }
+static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; }
+static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
+
+static inline int pte_present(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_PRESENT;
+}
+
+/* Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * Even if PTEs can be unsigned long long, a PFN is always an unsigned
+ * long for now.
+ */
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
+{
+	return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) |
+		     pgprot_val(pgprot));
+}
+
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	return pte_val(pte) >> PTE_RPN_SHIFT;
+}
+
+/* Generic modifiers for PTE bits */
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_RW);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_RW);
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SPECIAL);
+}
+
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	return pte;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+
+
+/* This low level function performs the actual PTE insertion
+ * Setting the PTE depends on the MMU type and other factors. It's
+ * an horrible mess that I'm not going to try to clean up now but
+ * I'm keeping it in one place rather than spread around
+ */
+static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
+				pte_t *ptep, pte_t pte, int percpu)
+{
+#if defined(CONFIG_PPC_STD_MMU_32) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
+	/* First case is 32-bit Hash MMU in SMP mode with 32-bit PTEs. We use the
+	 * helper pte_update() which does an atomic update. We need to do that
+	 * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a
+	 * per-CPU PTE such as a kmap_atomic, we do a simple update preserving
+	 * the hash bits instead (ie, same as the non-SMP case)
+	 */
+	if (percpu)
+		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+			      | (pte_val(pte) & ~_PAGE_HASHPTE));
+	else
+		pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte));
+
+#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
+	/* Second case is 32-bit with 64-bit PTE.  In this case, we
+	 * can just store as long as we do the two halves in the right order
+	 * with a barrier in between. This is possible because we take care,
+	 * in the hash code, to pre-invalidate if the PTE was already hashed,
+	 * which synchronizes us with any concurrent invalidation.
+	 * In the percpu case, we also fallback to the simple update preserving
+	 * the hash bits
+	 */
+	if (percpu) {
+		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+			      | (pte_val(pte) & ~_PAGE_HASHPTE));
+		return;
+	}
+	if (pte_val(*ptep) & _PAGE_HASHPTE)
+		flush_hash_entry(mm, ptep, addr);
+	__asm__ __volatile__("\
+		stw%U0%X0 %2,%0\n\
+		eieio\n\
+		stw%U0%X0 %L2,%1"
+	: "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
+	: "r" (pte) : "memory");
+
+#elif defined(CONFIG_PPC_STD_MMU_32)
+	/* Third case is 32-bit hash table in UP mode, we need to preserve
+	 * the _PAGE_HASHPTE bit since we may not have invalidated the previous
+	 * translation in the hash yet (done in a subsequent flush_tlb_xxx())
+	 * and see we need to keep track that this PTE needs invalidating
+	 */
+	*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+		      | (pte_val(pte) & ~_PAGE_HASHPTE));
+
+#else
+#error "Not supported "
+#endif
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL	(_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \
+			 _PAGE_WRITETHRU)
+
+#define pgprot_noncached pgprot_noncached
+static inline pgprot_t pgprot_noncached(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_NO_CACHE | _PAGE_GUARDED);
+}
+
+#define pgprot_noncached_wc pgprot_noncached_wc
+static inline pgprot_t pgprot_noncached_wc(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_NO_CACHE);
+}
+
+#define pgprot_cached pgprot_cached
+static inline pgprot_t pgprot_cached(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_COHERENT);
+}
+
+#define pgprot_cached_wthru pgprot_cached_wthru
+static inline pgprot_t pgprot_cached_wthru(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_COHERENT | _PAGE_WRITETHRU);
+}
+
+#define pgprot_cached_noncoherent pgprot_cached_noncoherent
+static inline pgprot_t pgprot_cached_noncoherent(pgprot_t prot)
+{
+	return __pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL);
+}
+
+#define pgprot_writecombine pgprot_writecombine
+static inline pgprot_t pgprot_writecombine(pgprot_t prot)
+{
+	return pgprot_noncached_wc(prot);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /*  _ASM_POWERPC_BOOK3S_32_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h
new file mode 100644
index 000000000..ea0414d66
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
@@ -0,0 +1,132 @@
+#ifndef _ASM_POWERPC_BOOK3S_64_HASH_4K_H
+#define _ASM_POWERPC_BOOK3S_64_HASH_4K_H
+/*
+ * Entries per page directory level.  The PTE level must use a 64b record
+ * for each page table entry.  The PMD and PGD level use a 32b record for
+ * each entry by assuming that each entry is page aligned.
+ */
+#define PTE_INDEX_SIZE  9
+#define PMD_INDEX_SIZE  7
+#define PUD_INDEX_SIZE  9
+#define PGD_INDEX_SIZE  9
+
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PUD_TABLE_SIZE	(sizeof(pud_t) << PUD_INDEX_SIZE)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif	/* __ASSEMBLY__ */
+
+#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PUD	(1 << PUD_INDEX_SIZE)
+#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT	PMD_SHIFT
+
+/* PUD_SHIFT determines what a third-level page table entry can map */
+#define PUD_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
+#define PUD_SIZE	(1UL << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
+#define PGDIR_SHIFT	(PUD_SHIFT + PUD_INDEX_SIZE)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS		0
+/* Bits to mask out from a PUD to get to the PMD page */
+#define PUD_MASKED_BITS		0
+/* Bits to mask out from a PGD to get to the PUD page */
+#define PGD_MASKED_BITS		0
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
+			 _PAGE_F_SECOND | _PAGE_F_GIX)
+
+/* shift to put page number into pte */
+#define PTE_RPN_SHIFT	(18)
+
+#define _PAGE_4K_PFN		0
+#ifndef __ASSEMBLY__
+/*
+ * 4-level page tables related bits
+ */
+
+#define pgd_none(pgd)		(!pgd_val(pgd))
+#define pgd_bad(pgd)		(pgd_val(pgd) == 0)
+#define pgd_present(pgd)	(pgd_val(pgd) != 0)
+#define pgd_page_vaddr(pgd)	(pgd_val(pgd) & ~PGD_MASKED_BITS)
+
+static inline void pgd_clear(pgd_t *pgdp)
+{
+	*pgdp = __pgd(0);
+}
+
+static inline pte_t pgd_pte(pgd_t pgd)
+{
+	return __pte(pgd_val(pgd));
+}
+
+static inline pgd_t pte_pgd(pte_t pte)
+{
+	return __pgd(pte_val(pte));
+}
+extern struct page *pgd_page(pgd_t pgd);
+
+#define pud_offset(pgdp, addr)	\
+  (((pud_t *) pgd_page_vaddr(*(pgdp))) + \
+    (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
+
+#define pud_ERROR(e) \
+	pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
+
+/*
+ * On all 4K setups, remap_4k_pfn() equates to remap_pfn_range() */
+#define remap_4k_pfn(vma, addr, pfn, prot)	\
+	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
+
+#ifdef CONFIG_HUGETLB_PAGE
+/*
+ * For 4k page size, we support explicit hugepage via hugepd
+ */
+static inline int pmd_huge(pmd_t pmd)
+{
+	return 0;
+}
+
+static inline int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
+static inline int pgd_huge(pgd_t pgd)
+{
+	return 0;
+}
+#define pgd_huge pgd_huge
+
+static inline int hugepd_ok(hugepd_t hpd)
+{
+	/*
+	 * if it is not a pte and have hugepd shift mask
+	 * set, then it is a hugepd directory pointer
+	 */
+	if (!(hpd.pd & _PAGE_PTE) &&
+	    ((hpd.pd & HUGEPD_SHIFT_MASK) != 0))
+		return true;
+	return false;
+}
+#define is_hugepd(hpd)		(hugepd_ok(hpd))
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_BOOK3S_64_HASH_4K_H */
diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
new file mode 100644
index 000000000..849bbec80
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -0,0 +1,300 @@
+#ifndef _ASM_POWERPC_BOOK3S_64_HASH_64K_H
+#define _ASM_POWERPC_BOOK3S_64_HASH_64K_H
+
+#include <asm-generic/pgtable-nopud.h>
+
+#define PTE_INDEX_SIZE  8
+#define PMD_INDEX_SIZE  10
+#define PUD_INDEX_SIZE	0
+#define PGD_INDEX_SIZE  12
+
+#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT	PAGE_SHIFT
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+#define _PAGE_COMBO	0x00040000 /* this is a combo 4k page */
+#define _PAGE_4K_PFN	0x00080000 /* PFN is for a single 4k page */
+/*
+ * Used to track subpage group valid if _PAGE_COMBO is set
+ * This overloads _PAGE_F_GIX and _PAGE_F_SECOND
+ */
+#define _PAGE_COMBO_VALID	(_PAGE_F_GIX | _PAGE_F_SECOND)
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_F_SECOND | \
+			 _PAGE_F_GIX | _PAGE_HASHPTE | _PAGE_COMBO)
+
+/* Shift to put page number into pte.
+ *
+ * That gives us a max RPN of 34 bits, which means a max of 50 bits
+ * of addressable physical space, or 46 bits for the special 4k PFNs.
+ */
+#define PTE_RPN_SHIFT	(30)
+/*
+ * we support 16 fragments per PTE page of 64K size.
+ */
+#define PTE_FRAG_NR	16
+/*
+ * We use a 2K PTE page fragment and another 2K for storing
+ * real_pte_t hash index
+ */
+#define PTE_FRAG_SIZE_SHIFT  12
+#define PTE_FRAG_SIZE (1UL << PTE_FRAG_SIZE_SHIFT)
+
+/*
+ * Bits to mask out from a PMD to get to the PTE page
+ * PMDs point to PTE table fragments which are PTE_FRAG_SIZE aligned.
+ */
+#define PMD_MASKED_BITS		(PTE_FRAG_SIZE - 1)
+/* Bits to mask out from a PGD/PUD to get to the PMD page */
+#define PUD_MASKED_BITS		0x1ff
+
+#ifndef __ASSEMBLY__
+
+/*
+ * With 64K pages on hash table, we have a special PTE format that
+ * uses a second "half" of the page table to encode sub-page information
+ * in order to deal with 64K made of 4K HW pages. Thus we override the
+ * generic accessors and iterators here
+ */
+#define __real_pte __real_pte
+static inline real_pte_t __real_pte(pte_t pte, pte_t *ptep)
+{
+	real_pte_t rpte;
+	unsigned long *hidxp;
+
+	rpte.pte = pte;
+	rpte.hidx = 0;
+	if (pte_val(pte) & _PAGE_COMBO) {
+		/*
+		 * Make sure we order the hidx load against the _PAGE_COMBO
+		 * check. The store side ordering is done in __hash_page_4K
+		 */
+		smp_rmb();
+		hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
+		rpte.hidx = *hidxp;
+	}
+	return rpte;
+}
+
+static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
+{
+	if ((pte_val(rpte.pte) & _PAGE_COMBO))
+		return (rpte.hidx >> (index<<2)) & 0xf;
+	return (pte_val(rpte.pte) >> _PAGE_F_GIX_SHIFT) & 0xf;
+}
+
+#define __rpte_to_pte(r)	((r).pte)
+extern bool __rpte_sub_valid(real_pte_t rpte, unsigned long index);
+/*
+ * Trick: we set __end to va + 64k, which happens works for
+ * a 16M page as well as we want only one iteration
+ */
+#define pte_iterate_hashed_subpages(rpte, psize, vpn, index, shift)	\
+	do {								\
+		unsigned long __end = vpn + (1UL << (PAGE_SHIFT - VPN_SHIFT));	\
+		unsigned __split = (psize == MMU_PAGE_4K ||		\
+				    psize == MMU_PAGE_64K_AP);		\
+		shift = mmu_psize_defs[psize].shift;			\
+		for (index = 0; vpn < __end; index++,			\
+			     vpn += (1L << (shift - VPN_SHIFT))) {	\
+			if (!__split || __rpte_sub_valid(rpte, index))	\
+				do {
+
+#define pte_iterate_hashed_end() } while(0); } } while(0)
+
+#define pte_pagesize_index(mm, addr, pte)	\
+	(((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
+
+#define remap_4k_pfn(vma, addr, pfn, prot)				\
+	(WARN_ON(((pfn) >= (1UL << (64 - PTE_RPN_SHIFT)))) ? -EINVAL :	\
+		remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE,	\
+			__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)))
+
+#define PTE_TABLE_SIZE	PTE_FRAG_SIZE
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define PMD_TABLE_SIZE	((sizeof(pmd_t) << PMD_INDEX_SIZE) + (sizeof(unsigned long) << PMD_INDEX_SIZE))
+#else
+#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
+#endif
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+
+#define pgd_pte(pgd)	(pud_pte(((pud_t){ pgd })))
+#define pte_pgd(pte)	((pgd_t)pte_pud(pte))
+
+#ifdef CONFIG_HUGETLB_PAGE
+/*
+ * We have PGD_INDEX_SIZ = 12 and PTE_INDEX_SIZE = 8, so that we can have
+ * 16GB hugepage pte in PGD and 16MB hugepage pte at PMD;
+ *
+ * Defined in such a way that we can optimize away code block at build time
+ * if CONFIG_HUGETLB_PAGE=n.
+ */
+static inline int pmd_huge(pmd_t pmd)
+{
+	/*
+	 * leaf pte for huge page
+	 */
+	return !!(pmd_val(pmd) & _PAGE_PTE);
+}
+
+static inline int pud_huge(pud_t pud)
+{
+	/*
+	 * leaf pte for huge page
+	 */
+	return !!(pud_val(pud) & _PAGE_PTE);
+}
+
+static inline int pgd_huge(pgd_t pgd)
+{
+	/*
+	 * leaf pte for huge page
+	 */
+	return !!(pgd_val(pgd) & _PAGE_PTE);
+}
+#define pgd_huge pgd_huge
+
+#ifdef CONFIG_DEBUG_VM
+extern int hugepd_ok(hugepd_t hpd);
+#define is_hugepd(hpd)               (hugepd_ok(hpd))
+#else
+/*
+ * With 64k page size, we have hugepage ptes in the pgd and pmd entries. We don't
+ * need to setup hugepage directory for them. Our pte and page directory format
+ * enable us to have this enabled.
+ */
+static inline int hugepd_ok(hugepd_t hpd)
+{
+	return 0;
+}
+#define is_hugepd(pdep)			0
+#endif /* CONFIG_DEBUG_VM */
+
+#endif /* CONFIG_HUGETLB_PAGE */
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+extern unsigned long pmd_hugepage_update(struct mm_struct *mm,
+					 unsigned long addr,
+					 pmd_t *pmdp,
+					 unsigned long clr,
+					 unsigned long set);
+static inline char *get_hpte_slot_array(pmd_t *pmdp)
+{
+	/*
+	 * The hpte hindex is stored in the pgtable whose address is in the
+	 * second half of the PMD
+	 *
+	 * Order this load with the test for pmd_trans_huge in the caller
+	 */
+	smp_rmb();
+	return *(char **)(pmdp + PTRS_PER_PMD);
+
+
+}
+/*
+ * The linux hugepage PMD now include the pmd entries followed by the address
+ * to the stashed pgtable_t. The stashed pgtable_t contains the hpte bits.
+ * [ 1 bit secondary | 3 bit hidx | 1 bit valid | 000]. We use one byte per
+ * each HPTE entry. With 16MB hugepage and 64K HPTE we need 256 entries and
+ * with 4K HPTE we need 4096 entries. Both will fit in a 4K pgtable_t.
+ *
+ * The last three bits are intentionally left to zero. This memory location
+ * are also used as normal page PTE pointers. So if we have any pointers
+ * left around while we collapse a hugepage, we need to make sure
+ * _PAGE_PRESENT bit of that is zero when we look at them
+ */
+static inline unsigned int hpte_valid(unsigned char *hpte_slot_array, int index)
+{
+	return (hpte_slot_array[index] >> 3) & 0x1;
+}
+
+static inline unsigned int hpte_hash_index(unsigned char *hpte_slot_array,
+					   int index)
+{
+	return hpte_slot_array[index] >> 4;
+}
+
+static inline void mark_hpte_slot_valid(unsigned char *hpte_slot_array,
+					unsigned int index, unsigned int hidx)
+{
+	hpte_slot_array[index] = hidx << 4 | 0x1 << 3;
+}
+
+/*
+ *
+ * For core kernel code by design pmd_trans_huge is never run on any hugetlbfs
+ * page. The hugetlbfs page table walking and mangling paths are totally
+ * separated form the core VM paths and they're differentiated by
+ *  VM_HUGETLB being set on vm_flags well before any pmd_trans_huge could run.
+ *
+ * pmd_trans_huge() is defined as false at build time if
+ * CONFIG_TRANSPARENT_HUGEPAGE=n to optimize away code blocks at build
+ * time in such case.
+ *
+ * For ppc64 we need to differntiate from explicit hugepages from THP, because
+ * for THP we also track the subpage details at the pmd level. We don't do
+ * that for explicit huge pages.
+ *
+ */
+static inline int pmd_trans_huge(pmd_t pmd)
+{
+	return !!((pmd_val(pmd) & (_PAGE_PTE | _PAGE_THP_HUGE)) ==
+		  (_PAGE_PTE | _PAGE_THP_HUGE));
+}
+
+static inline int pmd_large(pmd_t pmd)
+{
+	return !!(pmd_val(pmd) & _PAGE_PTE);
+}
+
+static inline pmd_t pmd_mknotpresent(pmd_t pmd)
+{
+	return __pmd(pmd_val(pmd) & ~_PAGE_PRESENT);
+}
+
+#define __HAVE_ARCH_PMD_SAME
+static inline int pmd_same(pmd_t pmd_a, pmd_t pmd_b)
+{
+	return (((pmd_val(pmd_a) ^ pmd_val(pmd_b)) & ~_PAGE_HPTEFLAGS) == 0);
+}
+
+static inline int __pmdp_test_and_clear_young(struct mm_struct *mm,
+					      unsigned long addr, pmd_t *pmdp)
+{
+	unsigned long old;
+
+	if ((pmd_val(*pmdp) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
+		return 0;
+	old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED, 0);
+	return ((old & _PAGE_ACCESSED) != 0);
+}
+
+#define __HAVE_ARCH_PMDP_SET_WRPROTECT
+static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pmd_t *pmdp)
+{
+
+	if ((pmd_val(*pmdp) & _PAGE_RW) == 0)
+		return;
+
+	pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW, 0);
+}
+
+#endif /*  CONFIG_TRANSPARENT_HUGEPAGE */
+#endif	/* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_BOOK3S_64_HASH_64K_H */
diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
new file mode 100644
index 000000000..8d1c8162f
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/hash.h
@@ -0,0 +1,547 @@
+#ifndef _ASM_POWERPC_BOOK3S_64_HASH_H
+#define _ASM_POWERPC_BOOK3S_64_HASH_H
+#ifdef __KERNEL__
+
+/*
+ * Common bits between 4K and 64K pages in a linux-style PTE.
+ * These match the bits in the (hardware-defined) PowerPC PTE as closely
+ * as possible. Additional bits may be defined in pgtable-hash64-*.h
+ *
+ * Note: We only support user read/write permissions. Supervisor always
+ * have full read/write to pages above PAGE_OFFSET (pages below that
+ * always use the user access permissions).
+ *
+ * We could create separate kernel read-only if we used the 3 PP bits
+ * combinations that newer processors provide but we currently don't.
+ */
+#define _PAGE_PTE		0x00001
+#define _PAGE_PRESENT		0x00002 /* software: pte contains a translation */
+#define _PAGE_BIT_SWAP_TYPE	2
+#define _PAGE_USER		0x00004 /* matches one of the PP bits */
+#define _PAGE_EXEC		0x00008 /* No execute on POWER4 and newer (we invert) */
+#define _PAGE_GUARDED		0x00010
+/* We can derive Memory coherence from _PAGE_NO_CACHE */
+#define _PAGE_COHERENT		0x0
+#define _PAGE_NO_CACHE		0x00020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU		0x00040 /* W: cache write-through */
+#define _PAGE_DIRTY		0x00080 /* C: page changed */
+#define _PAGE_ACCESSED		0x00100 /* R: page referenced */
+#define _PAGE_RW		0x00200 /* software: user write access allowed */
+#define _PAGE_HASHPTE		0x00400 /* software: pte has an associated HPTE */
+#define _PAGE_BUSY		0x00800 /* software: PTE & hash are busy */
+#define _PAGE_F_GIX		0x07000 /* full page: hidx bits */
+#define _PAGE_F_GIX_SHIFT	12
+#define _PAGE_F_SECOND		0x08000 /* Whether to use secondary hash or not */
+#define _PAGE_SPECIAL		0x10000 /* software: special page */
+
+#ifdef CONFIG_MEM_SOFT_DIRTY
+#define _PAGE_SOFT_DIRTY	0x20000 /* software: software dirty tracking */
+#else
+#define _PAGE_SOFT_DIRTY	0x00000
+#endif
+
+/*
+ * We need to differentiate between explicit huge page and THP huge
+ * page, since THP huge page also need to track real subpage details
+ */
+#define _PAGE_THP_HUGE  _PAGE_4K_PFN
+
+/*
+ * set of bits not changed in pmd_modify.
+ */
+#define _HPAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
+			 _PAGE_ACCESSED | _PAGE_THP_HUGE | _PAGE_PTE | \
+			 _PAGE_SOFT_DIRTY)
+
+
+#ifdef CONFIG_PPC_64K_PAGES
+#include <asm/book3s/64/hash-64k.h>
+#else
+#include <asm/book3s/64/hash-4k.h>
+#endif
+
+/*
+ * Size of EA range mapped by our pagetables.
+ */
+#define PGTABLE_EADDR_SIZE	(PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
+				 PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
+#define PGTABLE_RANGE		(ASM_CONST(1) << PGTABLE_EADDR_SIZE)
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define PMD_CACHE_INDEX	(PMD_INDEX_SIZE + 1)
+#else
+#define PMD_CACHE_INDEX	PMD_INDEX_SIZE
+#endif
+/*
+ * Define the address range of the kernel non-linear virtual area
+ */
+#define KERN_VIRT_START ASM_CONST(0xD000000000000000)
+#define KERN_VIRT_SIZE	ASM_CONST(0x0000100000000000)
+
+/*
+ * The vmalloc space starts at the beginning of that region, and
+ * occupies half of it on hash CPUs and a quarter of it on Book3E
+ * (we keep a quarter for the virtual memmap)
+ */
+#define VMALLOC_START	KERN_VIRT_START
+#define VMALLOC_SIZE	(KERN_VIRT_SIZE >> 1)
+#define VMALLOC_END	(VMALLOC_START + VMALLOC_SIZE)
+
+/*
+ * Region IDs
+ */
+#define REGION_SHIFT		60UL
+#define REGION_MASK		(0xfUL << REGION_SHIFT)
+#define REGION_ID(ea)		(((unsigned long)(ea)) >> REGION_SHIFT)
+
+#define VMALLOC_REGION_ID	(REGION_ID(VMALLOC_START))
+#define KERNEL_REGION_ID	(REGION_ID(PAGE_OFFSET))
+#define VMEMMAP_REGION_ID	(0xfUL)	/* Server only */
+#define USER_REGION_ID		(0UL)
+
+/*
+ * Defines the address of the vmemap area, in its own region on
+ * hash table CPUs.
+ */
+#define VMEMMAP_BASE		(VMEMMAP_REGION_ID << REGION_SHIFT)
+
+#ifdef CONFIG_PPC_MM_SLICES
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+#endif /* CONFIG_PPC_MM_SLICES */
+
+/* No separate kernel read-only */
+#define _PAGE_KERNEL_RW		(_PAGE_RW | _PAGE_DIRTY) /* user access blocked by key */
+#define _PAGE_KERNEL_RO		 _PAGE_KERNEL_RW
+#define _PAGE_KERNEL_RWX	(_PAGE_DIRTY | _PAGE_RW | _PAGE_EXEC)
+
+/* Strong Access Ordering */
+#define _PAGE_SAO		(_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
+
+/* No page size encoding in the linux PTE */
+#define _PAGE_PSIZE		0
+
+/* PTEIDX nibble */
+#define _PTEIDX_SECONDARY	0x8
+#define _PTEIDX_GROUP_IX	0x7
+
+/* Hash table based platforms need atomic updates of the linux PTE */
+#define PTE_ATOMIC_UPDATES	1
+#define _PTE_NONE_MASK	_PAGE_HPTEFLAGS
+/*
+ * The mask convered by the RPN must be a ULL on 32-bit platforms with
+ * 64-bit PTEs
+ */
+#define PTE_RPN_MASK	(~((1UL << PTE_RPN_SHIFT) - 1))
+/*
+ * _PAGE_CHG_MASK masks of bits that are to be preserved across
+ * pgprot changes
+ */
+#define _PAGE_CHG_MASK	(PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
+			 _PAGE_ACCESSED | _PAGE_SPECIAL | _PAGE_PTE | \
+			 _PAGE_SOFT_DIRTY)
+/*
+ * Mask of bits returned by pte_pgprot()
+ */
+#define PAGE_PROT_BITS	(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
+			 _PAGE_WRITETHRU | _PAGE_4K_PFN | \
+			 _PAGE_USER | _PAGE_ACCESSED |  \
+			 _PAGE_RW |  _PAGE_DIRTY | _PAGE_EXEC | \
+			 _PAGE_SOFT_DIRTY)
+/*
+ * We define 2 sets of base prot bits, one for basic pages (ie,
+ * cacheable kernel and user pages) and one for non cacheable
+ * pages. We always set _PAGE_COHERENT when SMP is enabled or
+ * the processor might need it for DMA coherency.
+ */
+#define _PAGE_BASE_NC	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_PSIZE)
+#define _PAGE_BASE	(_PAGE_BASE_NC | _PAGE_COHERENT)
+
+/* Permission masks used to generate the __P and __S table,
+ *
+ * Note:__pgprot is defined in arch/powerpc/include/asm/page.h
+ *
+ * Write permissions imply read permissions for now (we could make write-only
+ * pages on BookE but we don't bother for now). Execute permission control is
+ * possible on platforms that define _PAGE_EXEC
+ *
+ * Note due to the way vm flags are laid out, the bits are XWR
+ */
+#define PAGE_NONE	__pgprot(_PAGE_BASE)
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | \
+				 _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER )
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER )
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_X
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY_X
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_X
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED_X
+#define __S111	PAGE_SHARED_X
+
+/* Permission masks used for kernel mappings */
+#define PAGE_KERNEL	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RW)
+#define PAGE_KERNEL_NC	__pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \
+				 _PAGE_NO_CACHE)
+#define PAGE_KERNEL_NCG	__pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \
+				 _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define PAGE_KERNEL_X	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX)
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RO)
+#define PAGE_KERNEL_ROX	__pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX)
+
+/* Protection used for kernel text. We want the debuggers to be able to
+ * set breakpoints anywhere, so don't write protect the kernel text
+ * on platforms where such control is possible.
+ */
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
+	defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE)
+#define PAGE_KERNEL_TEXT	PAGE_KERNEL_X
+#else
+#define PAGE_KERNEL_TEXT	PAGE_KERNEL_ROX
+#endif
+
+/* Make modules code happy. We don't set RO yet */
+#define PAGE_KERNEL_EXEC	PAGE_KERNEL_X
+#define PAGE_AGP		(PAGE_KERNEL_NC)
+
+#define PMD_BAD_BITS		(PTE_TABLE_SIZE-1)
+#define PUD_BAD_BITS		(PMD_TABLE_SIZE-1)
+
+#ifndef __ASSEMBLY__
+#define	pmd_bad(pmd)		(!is_kernel_addr(pmd_val(pmd)) \
+				 || (pmd_val(pmd) & PMD_BAD_BITS))
+#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & ~PMD_MASKED_BITS)
+
+#define	pud_bad(pud)		(!is_kernel_addr(pud_val(pud)) \
+				 || (pud_val(pud) & PUD_BAD_BITS))
+#define pud_page_vaddr(pud)	(pud_val(pud) & ~PUD_MASKED_BITS)
+
+#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & (PTRS_PER_PGD - 1))
+#define pmd_index(address) (((address) >> (PMD_SHIFT)) & (PTRS_PER_PMD - 1))
+#define pte_index(address) (((address) >> (PAGE_SHIFT)) & (PTRS_PER_PTE - 1))
+
+extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
+			    pte_t *ptep, unsigned long pte, int huge);
+extern unsigned long htab_convert_pte_flags(unsigned long pteflags);
+/* Atomic PTE updates */
+static inline unsigned long pte_update(struct mm_struct *mm,
+				       unsigned long addr,
+				       pte_t *ptep, unsigned long clr,
+				       unsigned long set,
+				       int huge)
+{
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%3		# pte_update\n\
+	andi.	%1,%0,%6\n\
+	bne-	1b \n\
+	andc	%1,%0,%4 \n\
+	or	%1,%1,%7\n\
+	stdcx.	%1,0,%3 \n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*ptep)
+	: "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY), "r" (set)
+	: "cc" );
+	/* huge pages use the old page table lock */
+	if (!huge)
+		assert_pte_locked(mm, addr);
+
+	if (old & _PAGE_HASHPTE)
+		hpte_need_flush(mm, addr, ptep, old, huge);
+
+	return old;
+}
+
+static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
+					      unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+
+	if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
+		return 0;
+	old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0);
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define ptep_test_and_clear_young(__vma, __addr, __ptep)		   \
+({									   \
+	int __r;							   \
+	__r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \
+	__r;								   \
+})
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pte_t *ptep)
+{
+
+	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+		return;
+
+	pte_update(mm, addr, ptep, _PAGE_RW, 0, 0);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+		return;
+
+	pte_update(mm, addr, ptep, _PAGE_RW, 0, 1);
+}
+
+/*
+ * We currently remove entries from the hashtable regardless of whether
+ * the entry was young or dirty. The generic routines only flush if the
+ * entry was young or dirty which is not good enough.
+ *
+ * We should be more intelligent about this but for the moment we override
+ * these functions and force a tlb flush unconditionally
+ */
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+#define ptep_clear_flush_young(__vma, __address, __ptep)		\
+({									\
+	int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \
+						  __ptep);		\
+	__young;							\
+})
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+				       unsigned long addr, pte_t *ptep)
+{
+	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0, 0);
+	return __pte(old);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t * ptep)
+{
+	pte_update(mm, addr, ptep, ~0UL, 0, 0);
+}
+
+
+/* Set the dirty and/or accessed bits atomically in a linux PTE, this
+ * function doesn't need to flush the hash entry
+ */
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
+{
+	unsigned long bits = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC |
+		 _PAGE_SOFT_DIRTY);
+
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%4\n\
+		andi.	%1,%0,%6\n\
+		bne-	1b \n\
+		or	%0,%3,%0\n\
+		stdcx.	%0,0,%4\n\
+		bne-	1b"
+	:"=&r" (old), "=&r" (tmp), "=m" (*ptep)
+	:"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY)
+	:"cc");
+}
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
+
+/* Generic accessors to PTE bits */
+static inline int pte_write(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_RW);}
+static inline int pte_dirty(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_DIRTY); }
+static inline int pte_young(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_ACCESSED); }
+static inline int pte_special(pte_t pte)	{ return !!(pte_val(pte) & _PAGE_SPECIAL); }
+static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; }
+static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
+
+#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
+static inline bool pte_soft_dirty(pte_t pte)
+{
+	return !!(pte_val(pte) & _PAGE_SOFT_DIRTY);
+}
+static inline pte_t pte_mksoft_dirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SOFT_DIRTY);
+}
+
+static inline pte_t pte_clear_soft_dirty(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_SOFT_DIRTY);
+}
+#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
+
+#ifdef CONFIG_NUMA_BALANCING
+/*
+ * These work without NUMA balancing but the kernel does not care. See the
+ * comment in include/asm-generic/pgtable.h . On powerpc, this will only
+ * work for user pages and always return true for kernel pages.
+ */
+static inline int pte_protnone(pte_t pte)
+{
+	return (pte_val(pte) &
+		(_PAGE_PRESENT | _PAGE_USER)) == _PAGE_PRESENT;
+}
+#endif /* CONFIG_NUMA_BALANCING */
+
+static inline int pte_present(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_PRESENT;
+}
+
+/* Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * Even if PTEs can be unsigned long long, a PFN is always an unsigned
+ * long for now.
+ */
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
+{
+	return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) |
+		     pgprot_val(pgprot));
+}
+
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	return pte_val(pte) >> PTE_RPN_SHIFT;
+}
+
+/* Generic modifiers for PTE bits */
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_RW);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_RW);
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_DIRTY | _PAGE_SOFT_DIRTY);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SPECIAL);
+}
+
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	return pte;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+/* This low level function performs the actual PTE insertion
+ * Setting the PTE depends on the MMU type and other factors. It's
+ * an horrible mess that I'm not going to try to clean up now but
+ * I'm keeping it in one place rather than spread around
+ */
+static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
+				pte_t *ptep, pte_t pte, int percpu)
+{
+	/*
+	 * Anything else just stores the PTE normally. That covers all 64-bit
+	 * cases, and 32-bit non-hash with 32-bit PTEs.
+	 */
+	*ptep = pte;
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL	(_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \
+			 _PAGE_WRITETHRU)
+
+#define pgprot_noncached pgprot_noncached
+static inline pgprot_t pgprot_noncached(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_NO_CACHE | _PAGE_GUARDED);
+}
+
+#define pgprot_noncached_wc pgprot_noncached_wc
+static inline pgprot_t pgprot_noncached_wc(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_NO_CACHE);
+}
+
+#define pgprot_cached pgprot_cached
+static inline pgprot_t pgprot_cached(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_COHERENT);
+}
+
+#define pgprot_cached_wthru pgprot_cached_wthru
+static inline pgprot_t pgprot_cached_wthru(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_COHERENT | _PAGE_WRITETHRU);
+}
+
+#define pgprot_cached_noncoherent pgprot_cached_noncoherent
+static inline pgprot_t pgprot_cached_noncoherent(pgprot_t prot)
+{
+	return __pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL);
+}
+
+#define pgprot_writecombine pgprot_writecombine
+static inline pgprot_t pgprot_writecombine(pgprot_t prot)
+{
+	return pgprot_noncached_wc(prot);
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+extern void hpte_do_hugepage_flush(struct mm_struct *mm, unsigned long addr,
+				   pmd_t *pmdp, unsigned long old_pmd);
+#else
+static inline void hpte_do_hugepage_flush(struct mm_struct *mm,
+					  unsigned long addr, pmd_t *pmdp,
+					  unsigned long old_pmd)
+{
+	WARN(1, "%s called with THP disabled\n", __func__);
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_BOOK3S_64_HASH_H */
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
new file mode 100644
index 000000000..ac07a30a7
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -0,0 +1,301 @@
+#ifndef _ASM_POWERPC_BOOK3S_64_PGTABLE_H_
+#define _ASM_POWERPC_BOOK3S_64_PGTABLE_H_
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the ppc64 hashed page table.
+ */
+
+#include <asm/book3s/64/hash.h>
+#include <asm/barrier.h>
+
+/*
+ * The second half of the kernel virtual space is used for IO mappings,
+ * it's itself carved into the PIO region (ISA and PHB IO space) and
+ * the ioremap space
+ *
+ *  ISA_IO_BASE = KERN_IO_START, 64K reserved area
+ *  PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces
+ * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE
+ */
+#define KERN_IO_START	(KERN_VIRT_START + (KERN_VIRT_SIZE >> 1))
+#define FULL_IO_SIZE	0x80000000ul
+#define  ISA_IO_BASE	(KERN_IO_START)
+#define  ISA_IO_END	(KERN_IO_START + 0x10000ul)
+#define  PHB_IO_BASE	(ISA_IO_END)
+#define  PHB_IO_END	(KERN_IO_START + FULL_IO_SIZE)
+#define IOREMAP_BASE	(PHB_IO_END)
+#define IOREMAP_END	(KERN_VIRT_START + KERN_VIRT_SIZE)
+
+#define vmemmap			((struct page *)VMEMMAP_BASE)
+
+/* Advertise special mapping type for AGP */
+#define HAVE_PAGE_AGP
+
+/* Advertise support for _PAGE_SPECIAL */
+#define __HAVE_ARCH_PTE_SPECIAL
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This is the default implementation of various PTE accessors, it's
+ * used in all cases except Book3S with 64K pages where we have a
+ * concept of sub-pages
+ */
+#ifndef __real_pte
+
+#ifdef CONFIG_STRICT_MM_TYPECHECKS
+#define __real_pte(e,p)		((real_pte_t){(e)})
+#define __rpte_to_pte(r)	((r).pte)
+#else
+#define __real_pte(e,p)		(e)
+#define __rpte_to_pte(r)	(__pte(r))
+#endif
+#define __rpte_to_hidx(r,index)	(pte_val(__rpte_to_pte(r)) >>_PAGE_F_GIX_SHIFT)
+
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)       \
+	do {							         \
+		index = 0;					         \
+		shift = mmu_psize_defs[psize].shift;		         \
+
+#define pte_iterate_hashed_end() } while(0)
+
+/*
+ * We expect this to be called only for user addresses or kernel virtual
+ * addresses other than the linear mapping.
+ */
+#define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
+
+#endif /* __real_pte */
+
+static inline void pmd_set(pmd_t *pmdp, unsigned long val)
+{
+	*pmdp = __pmd(val);
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	*pmdp = __pmd(0);
+}
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_present(pmd)	(!pmd_none(pmd))
+
+static inline void pud_set(pud_t *pudp, unsigned long val)
+{
+	*pudp = __pud(val);
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	*pudp = __pud(0);
+}
+
+#define pud_none(pud)		(!pud_val(pud))
+#define pud_present(pud)	(pud_val(pud) != 0)
+
+extern struct page *pud_page(pud_t pud);
+extern struct page *pmd_page(pmd_t pmd);
+static inline pte_t pud_pte(pud_t pud)
+{
+	return __pte(pud_val(pud));
+}
+
+static inline pud_t pte_pud(pte_t pte)
+{
+	return __pud(pte_val(pte));
+}
+#define pud_write(pud)		pte_write(pud_pte(pud))
+#define pgd_write(pgd)		pte_write(pgd_pte(pgd))
+static inline void pgd_set(pgd_t *pgdp, unsigned long val)
+{
+	*pgdp = __pgd(val);
+}
+
+/*
+ * Find an entry in a page-table-directory.  We combine the address region
+ * (the high order N bits) and the pgd portion of the address.
+ */
+
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+#define pmd_offset(pudp,addr) \
+	(((pmd_t *) pud_page_vaddr(*(pudp))) + pmd_index(addr))
+
+#define pte_offset_kernel(dir,addr) \
+	(((pte_t *) pmd_page_vaddr(*(dir))) + pte_index(addr))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_unmap(pte)			do { } while(0)
+
+/* to find an entry in a kernel page-table-directory */
+/* This now only contains the vmalloc pages */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#define pte_ERROR(e) \
+	pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/* Encode and de-code a swap entry */
+#define MAX_SWAPFILES_CHECK() do { \
+	BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS); \
+	/*							\
+	 * Don't have overlapping bits with _PAGE_HPTEFLAGS	\
+	 * We filter HPTEFLAGS on set_pte.			\
+	 */							\
+	BUILD_BUG_ON(_PAGE_HPTEFLAGS & (0x1f << _PAGE_BIT_SWAP_TYPE)); \
+	BUILD_BUG_ON(_PAGE_HPTEFLAGS & _PAGE_SWP_SOFT_DIRTY);	\
+	} while (0)
+/*
+ * on pte we don't need handle RADIX_TREE_EXCEPTIONAL_SHIFT;
+ */
+#define SWP_TYPE_BITS 5
+#define __swp_type(x)		(((x).val >> _PAGE_BIT_SWAP_TYPE) \
+				& ((1UL << SWP_TYPE_BITS) - 1))
+#define __swp_offset(x)		((x).val >> PTE_RPN_SHIFT)
+#define __swp_entry(type, offset)	((swp_entry_t) { \
+					((type) << _PAGE_BIT_SWAP_TYPE) \
+					| ((offset) << PTE_RPN_SHIFT) })
+/*
+ * swp_entry_t must be independent of pte bits. We build a swp_entry_t from
+ * swap type and offset we get from swap and convert that to pte to find a
+ * matching pte in linux page table.
+ * Clear bits not found in swap entries here.
+ */
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val((pte)) & ~_PAGE_PTE })
+#define __swp_entry_to_pte(x)	__pte((x).val | _PAGE_PTE)
+
+#ifdef CONFIG_MEM_SOFT_DIRTY
+#define _PAGE_SWP_SOFT_DIRTY   (1UL << (SWP_TYPE_BITS + _PAGE_BIT_SWAP_TYPE))
+#else
+#define _PAGE_SWP_SOFT_DIRTY	0UL
+#endif /* CONFIG_MEM_SOFT_DIRTY */
+
+#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
+static inline pte_t pte_swp_mksoft_dirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SWP_SOFT_DIRTY);
+}
+static inline bool pte_swp_soft_dirty(pte_t pte)
+{
+	return !!(pte_val(pte) & _PAGE_SWP_SOFT_DIRTY);
+}
+static inline pte_t pte_swp_clear_soft_dirty(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_SWP_SOFT_DIRTY);
+}
+#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
+
+void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
+void pgtable_cache_init(void);
+
+struct page *realmode_pfn_to_page(unsigned long pfn);
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+extern pmd_t pfn_pmd(unsigned long pfn, pgprot_t pgprot);
+extern pmd_t mk_pmd(struct page *page, pgprot_t pgprot);
+extern pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot);
+extern void set_pmd_at(struct mm_struct *mm, unsigned long addr,
+		       pmd_t *pmdp, pmd_t pmd);
+extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
+				 pmd_t *pmd);
+extern int has_transparent_hugepage(void);
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+
+static inline pte_t pmd_pte(pmd_t pmd)
+{
+	return __pte(pmd_val(pmd));
+}
+
+static inline pmd_t pte_pmd(pte_t pte)
+{
+	return __pmd(pte_val(pte));
+}
+
+static inline pte_t *pmdp_ptep(pmd_t *pmd)
+{
+	return (pte_t *)pmd;
+}
+
+#define pmd_pfn(pmd)		pte_pfn(pmd_pte(pmd))
+#define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
+#define pmd_young(pmd)		pte_young(pmd_pte(pmd))
+#define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
+#define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
+#define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
+#define pmd_mkclean(pmd)	pte_pmd(pte_mkclean(pmd_pte(pmd)))
+#define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
+#define pmd_mkwrite(pmd)	pte_pmd(pte_mkwrite(pmd_pte(pmd)))
+
+#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
+#define pmd_soft_dirty(pmd)    pte_soft_dirty(pmd_pte(pmd))
+#define pmd_mksoft_dirty(pmd)  pte_pmd(pte_mksoft_dirty(pmd_pte(pmd)))
+#define pmd_clear_soft_dirty(pmd) pte_pmd(pte_clear_soft_dirty(pmd_pte(pmd)))
+#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
+
+#ifdef CONFIG_NUMA_BALANCING
+static inline int pmd_protnone(pmd_t pmd)
+{
+	return pte_protnone(pmd_pte(pmd));
+}
+#endif /* CONFIG_NUMA_BALANCING */
+
+#define __HAVE_ARCH_PMD_WRITE
+#define pmd_write(pmd)		pte_write(pmd_pte(pmd))
+
+static inline pmd_t pmd_mkhuge(pmd_t pmd)
+{
+	return __pmd(pmd_val(pmd) | (_PAGE_PTE | _PAGE_THP_HUGE));
+}
+
+#define __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
+extern int pmdp_set_access_flags(struct vm_area_struct *vma,
+				 unsigned long address, pmd_t *pmdp,
+				 pmd_t entry, int dirty);
+
+#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
+extern int pmdp_test_and_clear_young(struct vm_area_struct *vma,
+				     unsigned long address, pmd_t *pmdp);
+#define __HAVE_ARCH_PMDP_CLEAR_YOUNG_FLUSH
+extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
+				  unsigned long address, pmd_t *pmdp);
+
+#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
+extern pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
+				     unsigned long addr, pmd_t *pmdp);
+
+extern pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
+				 unsigned long address, pmd_t *pmdp);
+#define pmdp_collapse_flush pmdp_collapse_flush
+
+#define __HAVE_ARCH_PGTABLE_DEPOSIT
+extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
+				       pgtable_t pgtable);
+#define __HAVE_ARCH_PGTABLE_WITHDRAW
+extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
+
+#define __HAVE_ARCH_PMDP_INVALIDATE
+extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
+			    pmd_t *pmdp);
+
+#define __HAVE_ARCH_PMDP_HUGE_SPLIT_PREPARE
+extern void pmdp_huge_split_prepare(struct vm_area_struct *vma,
+				    unsigned long address, pmd_t *pmdp);
+
+#define pmd_move_must_withdraw pmd_move_must_withdraw
+struct spinlock;
+static inline int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
+					 struct spinlock *old_pmd_ptl)
+{
+	/*
+	 * Archs like ppc64 use pgtable to store per pmd
+	 * specific information. So when we switch the pmd,
+	 * we should also withdraw and deposit the pgtable
+	 */
+	return true;
+}
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ */
diff --git a/arch/powerpc/include/asm/book3s/pgtable.h b/arch/powerpc/include/asm/book3s/pgtable.h
new file mode 100644
index 000000000..8b0f4a292
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/pgtable.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_POWERPC_BOOK3S_PGTABLE_H
+#define _ASM_POWERPC_BOOK3S_PGTABLE_H
+
+#ifdef CONFIG_PPC64
+#include <asm/book3s/64/pgtable.h>
+#else
+#include <asm/book3s/32/pgtable.h>
+#endif
+
+#define FIRST_USER_ADDRESS	0UL
+#ifndef __ASSEMBLY__
+/* Insert a PTE, top-level function is out of line. It uses an inline
+ * low level function in the respective pgtable-* files
+ */
+extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+		       pte_t pte);
+
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
+				 pte_t *ptep, pte_t entry, int dirty);
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 4398a6cdc..2c5c5b476 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -5,6 +5,7 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/of.h>
+#include <soc/fsl/qe/qe.h>
 
 /*
  * SPI Parameter RAM common to QE and CPM.
@@ -155,49 +156,6 @@ typedef struct cpm_buf_desc {
  */
 #define BD_I2C_START		(0x0400)
 
-int cpm_muram_init(void);
-
-#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
-int cpm_muram_free(unsigned long offset);
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
-void __iomem *cpm_muram_addr(unsigned long offset);
-unsigned long cpm_muram_offset(void __iomem *addr);
-dma_addr_t cpm_muram_dma(void __iomem *addr);
-#else
-static inline unsigned long cpm_muram_alloc(unsigned long size,
-					    unsigned long align)
-{
-	return -ENOSYS;
-}
-
-static inline int cpm_muram_free(unsigned long offset)
-{
-	return -ENOSYS;
-}
-
-static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
-						  unsigned long size)
-{
-	return -ENOSYS;
-}
-
-static inline void __iomem *cpm_muram_addr(unsigned long offset)
-{
-	return NULL;
-}
-
-static inline unsigned long cpm_muram_offset(void __iomem *addr)
-{
-	return -ENOSYS;
-}
-
-static inline dma_addr_t cpm_muram_dma(void __iomem *addr)
-{
-	return 0;
-}
-#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */
-
 #ifdef CONFIG_CPM
 int cpm_command(u32 command, u8 opcode);
 #else
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 7f522c021..77816acd4 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -125,8 +125,6 @@ static inline void set_dma_offset(struct device *dev, dma_addr_t off)
 #define HAVE_ARCH_DMA_SET_MASK 1
 extern int dma_set_mask(struct device *dev, u64 dma_mask);
 
-#include <asm-generic/dma-mapping-common.h>
-
 extern int __dma_set_mask(struct device *dev, u64 dma_mask);
 extern u64 __dma_get_required_mask(struct device *dev);
 
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 77f52b26d..93ae809fe 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -130,15 +130,6 @@ BEGIN_FTR_SECTION_NESTED(941)						\
 END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941)
 
 /*
- * Increase the priority on systems where PPR save/restore is not
- * implemented/ supported.
- */
-#define HMT_MEDIUM_PPR_DISCARD						\
-BEGIN_FTR_SECTION_NESTED(942)						\
-	HMT_MEDIUM;							\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,0,942)  /*non P7*/		
-
-/*
  * Get an SPR into a register if the CPU has the given feature
  */
 #define OPT_GET_SPR(ra, spr, ftr)					\
@@ -263,17 +254,6 @@ do_kvm_##n:								\
 #define KVM_HANDLER_SKIP(area, h, n)
 #endif
 
-#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
-#define KVMTEST_PR(n)			__KVMTEST(n)
-#define KVM_HANDLER_PR(area, h, n)	__KVM_HANDLER(area, h, n)
-#define KVM_HANDLER_PR_SKIP(area, h, n)	__KVM_HANDLER_SKIP(area, h, n)
-
-#else
-#define KVMTEST_PR(n)
-#define KVM_HANDLER_PR(area, h, n)
-#define KVM_HANDLER_PR_SKIP(area, h, n)
-#endif
-
 #define NOTEST(n)
 
 /*
@@ -353,27 +333,25 @@ do_kvm_##n:								\
 /*
  * Exception vectors.
  */
-#define STD_EXCEPTION_PSERIES(loc, vec, label)		\
-	. = loc;					\
+#define STD_EXCEPTION_PSERIES(vec, label)		\
+	. = vec;					\
 	.globl label##_pSeries;				\
 label##_pSeries:					\
-	HMT_MEDIUM_PPR_DISCARD;				\
 	SET_SCRATCH0(r13);		/* save r13 */		\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common,	\
-				 EXC_STD, KVMTEST_PR, vec)
+				 EXC_STD, KVMTEST, vec)
 
 /* Version of above for when we have to branch out-of-line */
 #define STD_EXCEPTION_PSERIES_OOL(vec, label)			\
 	.globl label##_pSeries;					\
 label##_pSeries:						\
-	EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_PR, vec);	\
+	EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST, vec);	\
 	EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_STD)
 
 #define STD_EXCEPTION_HV(loc, vec, label)		\
 	. = loc;					\
 	.globl label##_hv;				\
 label##_hv:						\
-	HMT_MEDIUM_PPR_DISCARD;				\
 	SET_SCRATCH0(r13);	/* save r13 */			\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common,	\
 				 EXC_HV, KVMTEST, vec)
@@ -389,7 +367,6 @@ label##_hv:						\
 	. = loc;					\
 	.globl label##_relon_pSeries;			\
 label##_relon_pSeries:					\
-	HMT_MEDIUM_PPR_DISCARD;				\
 	/* No guest interrupts come through here */	\
 	SET_SCRATCH0(r13);		/* save r13 */	\
 	EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
@@ -405,7 +382,6 @@ label##_relon_pSeries:						\
 	. = loc;					\
 	.globl label##_relon_hv;			\
 label##_relon_hv:					\
-	HMT_MEDIUM_PPR_DISCARD;				\
 	/* No guest interrupts come through here */	\
 	SET_SCRATCH0(r13);	/* save r13 */		\
 	EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
@@ -436,17 +412,13 @@ label##_relon_hv:						\
 #define _SOFTEN_TEST(h, vec)	__SOFTEN_TEST(h, vec)
 
 #define SOFTEN_TEST_PR(vec)						\
-	KVMTEST_PR(vec);						\
+	KVMTEST(vec);							\
 	_SOFTEN_TEST(EXC_STD, vec)
 
 #define SOFTEN_TEST_HV(vec)						\
 	KVMTEST(vec);							\
 	_SOFTEN_TEST(EXC_HV, vec)
 
-#define SOFTEN_TEST_HV_201(vec)						\
-	KVMTEST(vec);							\
-	_SOFTEN_TEST(EXC_STD, vec)
-
 #define SOFTEN_NOTEST_PR(vec)		_SOFTEN_TEST(EXC_STD, vec)
 #define SOFTEN_NOTEST_HV(vec)		_SOFTEN_TEST(EXC_HV, vec)
 
@@ -463,7 +435,6 @@ label##_relon_hv:						\
 	. = loc;							\
 	.globl label##_pSeries;						\
 label##_pSeries:							\
-	HMT_MEDIUM_PPR_DISCARD;						\
 	_MASKABLE_EXCEPTION_PSERIES(vec, label,				\
 				    EXC_STD, SOFTEN_TEST_PR)
 
@@ -481,7 +452,6 @@ label##_hv:								\
 	EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_HV);
 
 #define __MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)	\
-	HMT_MEDIUM_PPR_DISCARD;						\
 	SET_SCRATCH0(r13);    /* save r13 */				\
 	EXCEPTION_PROLOG_0(PACA_EXGEN);					\
 	__EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec);		\
diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h
index 493e72f64..b4407d0ad 100644
--- a/arch/powerpc/include/asm/fadump.h
+++ b/arch/powerpc/include/asm/fadump.h
@@ -191,7 +191,7 @@ struct fadump_crash_info_header {
 	u64		elfcorehdr_addr;
 	u32		crashing_cpu;
 	struct pt_regs	regs;
-	struct cpumask	cpu_online_mask;
+	struct cpumask	online_mask;
 };
 
 /* Crash memory ranges */
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index e05808a32..b06292497 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -47,12 +47,10 @@
 #define FW_FEATURE_VPHN		ASM_CONST(0x0000000004000000)
 #define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
 #define FW_FEATURE_OPAL		ASM_CONST(0x0000000010000000)
-#define FW_FEATURE_OPALv2	ASM_CONST(0x0000000020000000)
 #define FW_FEATURE_SET_MODE	ASM_CONST(0x0000000040000000)
 #define FW_FEATURE_BEST_ENERGY	ASM_CONST(0x0000000080000000)
 #define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
 #define FW_FEATURE_PRRN		ASM_CONST(0x0000000200000000)
-#define FW_FEATURE_OPALv3	ASM_CONST(0x0000000400000000)
 
 #ifndef __ASSEMBLY__
 
@@ -70,8 +68,7 @@ enum {
 		FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY |
 		FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
-	FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2 |
-		FW_FEATURE_OPALv3,
+	FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL,
 	FW_FEATURE_POWERNV_ALWAYS = 0,
 	FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
 	FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 85bc8c0d2..e3b54dd4f 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -258,11 +258,16 @@
 #define H_DEL_CONN		0x288
 #define H_JOIN			0x298
 #define H_VASI_STATE            0x2A4
+#define H_VIOCTL		0x2A8
 #define H_ENABLE_CRQ		0x2B0
 #define H_GET_EM_PARMS		0x2B8
 #define H_SET_MPP		0x2D0
 #define H_GET_MPP		0x2D4
+#define H_REG_SUB_CRQ		0x2DC
 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC
+#define H_FREE_SUB_CRQ		0x2E0
+#define H_SEND_SUB_CRQ		0x2E4
+#define H_SEND_SUB_CRQ_INDIRECT	0x2E8
 #define H_BEST_ENERGY		0x2F4
 #define H_XIRR_X		0x2FC
 #define H_RANDOM		0x300
@@ -271,6 +276,21 @@
 #define H_SET_MODE		0x31C
 #define MAX_HCALL_OPCODE	H_SET_MODE
 
+/* H_VIOCTL functions */
+#define H_GET_VIOA_DUMP_SIZE	0x01
+#define H_GET_VIOA_DUMP		0x02
+#define H_GET_ILLAN_NUM_VLAN_IDS 0x03
+#define H_GET_ILLAN_VLAN_ID_LIST 0x04
+#define H_GET_ILLAN_SWITCH_ID	0x05
+#define H_DISABLE_MIGRATION	0x06
+#define H_ENABLE_MIGRATION	0x07
+#define H_GET_PARTNER_INFO	0x08
+#define H_GET_PARTNER_WWPN_LIST	0x09
+#define H_DISABLE_ALL_VIO_INTS	0x0A
+#define H_DISABLE_VIO_INTERRUPT	0x0B
+#define H_ENABLE_VIO_INTERRUPT	0x0C
+
+
 /* Platform specific hcalls, used by KVM */
 #define H_RTAS			0xf000
 
diff --git a/arch/powerpc/include/asm/icswx.h b/arch/powerpc/include/asm/icswx.h
index 9f8402b35..27e588f6c 100644
--- a/arch/powerpc/include/asm/icswx.h
+++ b/arch/powerpc/include/asm/icswx.h
@@ -164,6 +164,7 @@ struct coprocessor_request_block {
 #define ICSWX_INITIATED		(0x8)
 #define ICSWX_BUSY		(0x4)
 #define ICSWX_REJECTED		(0x2)
+#define ICSWX_XERS0		(0x1)	/* undefined or set from XERSO. */
 
 static inline int icswx(__be32 ccw, struct coprocessor_request_block *crb)
 {
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
deleted file mode 100644
index bedbff891..000000000
--- a/arch/powerpc/include/asm/immap_qe.h
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * QUICC Engine (QE) Internal Memory Map.
- * The Internal Memory Map for devices with QE on them. This
- * is the superset of all QE devices (8360, etc.).
-
- * Copyright (C) 2006. Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_IMMAP_QE_H
-#define _ASM_POWERPC_IMMAP_QE_H
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#define QE_IMMAP_SIZE	(1024 * 1024)	/* 1MB from 1MB+IMMR */
-
-/* QE I-RAM */
-struct qe_iram {
-	__be32	iadd;		/* I-RAM Address Register */
-	__be32	idata;		/* I-RAM Data Register */
-	u8	res0[0x04];
-	__be32	iready;		/* I-RAM Ready Register */
-	u8	res1[0x70];
-} __attribute__ ((packed));
-
-/* QE Interrupt Controller */
-struct qe_ic_regs {
-	__be32	qicr;
-	__be32	qivec;
-	__be32	qripnr;
-	__be32	qipnr;
-	__be32	qipxcc;
-	__be32	qipycc;
-	__be32	qipwcc;
-	__be32	qipzcc;
-	__be32	qimr;
-	__be32	qrimr;
-	__be32	qicnr;
-	u8	res0[0x4];
-	__be32	qiprta;
-	__be32	qiprtb;
-	u8	res1[0x4];
-	__be32	qricr;
-	u8	res2[0x20];
-	__be32	qhivec;
-	u8	res3[0x1C];
-} __attribute__ ((packed));
-
-/* Communications Processor */
-struct cp_qe {
-	__be32	cecr;		/* QE command register */
-	__be32	ceccr;		/* QE controller configuration register */
-	__be32	cecdr;		/* QE command data register */
-	u8	res0[0xA];
-	__be16	ceter;		/* QE timer event register */
-	u8	res1[0x2];
-	__be16	cetmr;		/* QE timers mask register */
-	__be32	cetscr;		/* QE time-stamp timer control register */
-	__be32	cetsr1;		/* QE time-stamp register 1 */
-	__be32	cetsr2;		/* QE time-stamp register 2 */
-	u8	res2[0x8];
-	__be32	cevter;		/* QE virtual tasks event register */
-	__be32	cevtmr;		/* QE virtual tasks mask register */
-	__be16	cercr;		/* QE RAM control register */
-	u8	res3[0x2];
-	u8	res4[0x24];
-	__be16	ceexe1;		/* QE external request 1 event register */
-	u8	res5[0x2];
-	__be16	ceexm1;		/* QE external request 1 mask register */
-	u8	res6[0x2];
-	__be16	ceexe2;		/* QE external request 2 event register */
-	u8	res7[0x2];
-	__be16	ceexm2;		/* QE external request 2 mask register */
-	u8	res8[0x2];
-	__be16	ceexe3;		/* QE external request 3 event register */
-	u8	res9[0x2];
-	__be16	ceexm3;		/* QE external request 3 mask register */
-	u8	res10[0x2];
-	__be16	ceexe4;		/* QE external request 4 event register */
-	u8	res11[0x2];
-	__be16	ceexm4;		/* QE external request 4 mask register */
-	u8	res12[0x3A];
-	__be32	ceurnr;		/* QE microcode revision number register */
-	u8	res13[0x244];
-} __attribute__ ((packed));
-
-/* QE Multiplexer */
-struct qe_mux {
-	__be32	cmxgcr;		/* CMX general clock route register */
-	__be32	cmxsi1cr_l;	/* CMX SI1 clock route low register */
-	__be32	cmxsi1cr_h;	/* CMX SI1 clock route high register */
-	__be32	cmxsi1syr;	/* CMX SI1 SYNC route register */
-	__be32	cmxucr[4];	/* CMX UCCx clock route registers */
-	__be32	cmxupcr;	/* CMX UPC clock route register */
-	u8	res0[0x1C];
-} __attribute__ ((packed));
-
-/* QE Timers */
-struct qe_timers {
-	u8	gtcfr1;		/* Timer 1 and Timer 2 global config register*/
-	u8	res0[0x3];
-	u8	gtcfr2;		/* Timer 3 and timer 4 global config register*/
-	u8	res1[0xB];
-	__be16	gtmdr1;		/* Timer 1 mode register */
-	__be16	gtmdr2;		/* Timer 2 mode register */
-	__be16	gtrfr1;		/* Timer 1 reference register */
-	__be16	gtrfr2;		/* Timer 2 reference register */
-	__be16	gtcpr1;		/* Timer 1 capture register */
-	__be16	gtcpr2;		/* Timer 2 capture register */
-	__be16	gtcnr1;		/* Timer 1 counter */
-	__be16	gtcnr2;		/* Timer 2 counter */
-	__be16	gtmdr3;		/* Timer 3 mode register */
-	__be16	gtmdr4;		/* Timer 4 mode register */
-	__be16	gtrfr3;		/* Timer 3 reference register */
-	__be16	gtrfr4;		/* Timer 4 reference register */
-	__be16	gtcpr3;		/* Timer 3 capture register */
-	__be16	gtcpr4;		/* Timer 4 capture register */
-	__be16	gtcnr3;		/* Timer 3 counter */
-	__be16	gtcnr4;		/* Timer 4 counter */
-	__be16	gtevr1;		/* Timer 1 event register */
-	__be16	gtevr2;		/* Timer 2 event register */
-	__be16	gtevr3;		/* Timer 3 event register */
-	__be16	gtevr4;		/* Timer 4 event register */
-	__be16	gtps;		/* Timer 1 prescale register */
-	u8 res2[0x46];
-} __attribute__ ((packed));
-
-/* BRG */
-struct qe_brg {
-	__be32	brgc[16];	/* BRG configuration registers */
-	u8	res0[0x40];
-} __attribute__ ((packed));
-
-/* SPI */
-struct spi {
-	u8	res0[0x20];
-	__be32	spmode;		/* SPI mode register */
-	u8	res1[0x2];
-	u8	spie;		/* SPI event register */
-	u8	res2[0x1];
-	u8	res3[0x2];
-	u8	spim;		/* SPI mask register */
-	u8	res4[0x1];
-	u8	res5[0x1];
-	u8	spcom;		/* SPI command register */
-	u8	res6[0x2];
-	__be32	spitd;		/* SPI transmit data register (cpu mode) */
-	__be32	spird;		/* SPI receive data register (cpu mode) */
-	u8	res7[0x8];
-} __attribute__ ((packed));
-
-/* SI */
-struct si1 {
-	__be16	siamr1;		/* SI1 TDMA mode register */
-	__be16	sibmr1;		/* SI1 TDMB mode register */
-	__be16	sicmr1;		/* SI1 TDMC mode register */
-	__be16	sidmr1;		/* SI1 TDMD mode register */
-	u8	siglmr1_h;	/* SI1 global mode register high */
-	u8	res0[0x1];
-	u8	sicmdr1_h;	/* SI1 command register high */
-	u8	res2[0x1];
-	u8	sistr1_h;	/* SI1 status register high */
-	u8	res3[0x1];
-	__be16	sirsr1_h;	/* SI1 RAM shadow address register high */
-	u8	sitarc1;	/* SI1 RAM counter Tx TDMA */
-	u8	sitbrc1;	/* SI1 RAM counter Tx TDMB */
-	u8	sitcrc1;	/* SI1 RAM counter Tx TDMC */
-	u8	sitdrc1;	/* SI1 RAM counter Tx TDMD */
-	u8	sirarc1;	/* SI1 RAM counter Rx TDMA */
-	u8	sirbrc1;	/* SI1 RAM counter Rx TDMB */
-	u8	sircrc1;	/* SI1 RAM counter Rx TDMC */
-	u8	sirdrc1;	/* SI1 RAM counter Rx TDMD */
-	u8	res4[0x8];
-	__be16	siemr1;		/* SI1 TDME mode register 16 bits */
-	__be16	sifmr1;		/* SI1 TDMF mode register 16 bits */
-	__be16	sigmr1;		/* SI1 TDMG mode register 16 bits */
-	__be16	sihmr1;		/* SI1 TDMH mode register 16 bits */
-	u8	siglmg1_l;	/* SI1 global mode register low 8 bits */
-	u8	res5[0x1];
-	u8	sicmdr1_l;	/* SI1 command register low 8 bits */
-	u8	res6[0x1];
-	u8	sistr1_l;	/* SI1 status register low 8 bits */
-	u8	res7[0x1];
-	__be16	sirsr1_l;	/* SI1 RAM shadow address register low 16 bits*/
-	u8	siterc1;	/* SI1 RAM counter Tx TDME 8 bits */
-	u8	sitfrc1;	/* SI1 RAM counter Tx TDMF 8 bits */
-	u8	sitgrc1;	/* SI1 RAM counter Tx TDMG 8 bits */
-	u8	sithrc1;	/* SI1 RAM counter Tx TDMH 8 bits */
-	u8	sirerc1;	/* SI1 RAM counter Rx TDME 8 bits */
-	u8	sirfrc1;	/* SI1 RAM counter Rx TDMF 8 bits */
-	u8	sirgrc1;	/* SI1 RAM counter Rx TDMG 8 bits */
-	u8	sirhrc1;	/* SI1 RAM counter Rx TDMH 8 bits */
-	u8	res8[0x8];
-	__be32	siml1;		/* SI1 multiframe limit register */
-	u8	siedm1;		/* SI1 extended diagnostic mode register */
-	u8	res9[0xBB];
-} __attribute__ ((packed));
-
-/* SI Routing Tables */
-struct sir {
-	u8 	tx[0x400];
-	u8	rx[0x400];
-	u8	res0[0x800];
-} __attribute__ ((packed));
-
-/* USB Controller */
-struct qe_usb_ctlr {
-	u8	usb_usmod;
-	u8	usb_usadr;
-	u8	usb_uscom;
-	u8	res1[1];
-	__be16  usb_usep[4];
-	u8	res2[4];
-	__be16	usb_usber;
-	u8	res3[2];
-	__be16	usb_usbmr;
-	u8	res4[1];
-	u8	usb_usbs;
-	__be16	usb_ussft;
-	u8	res5[2];
-	__be16	usb_usfrn;
-	u8	res6[0x22];
-} __attribute__ ((packed));
-
-/* MCC */
-struct qe_mcc {
-	__be32	mcce;		/* MCC event register */
-	__be32	mccm;		/* MCC mask register */
-	__be32	mccf;		/* MCC configuration register */
-	__be32	merl;		/* MCC emergency request level register */
-	u8	res0[0xF0];
-} __attribute__ ((packed));
-
-/* QE UCC Slow */
-struct ucc_slow {
-	__be32	gumr_l;		/* UCCx general mode register (low) */
-	__be32	gumr_h;		/* UCCx general mode register (high) */
-	__be16	upsmr;		/* UCCx protocol-specific mode register */
-	u8	res0[0x2];
-	__be16	utodr;		/* UCCx transmit on demand register */
-	__be16	udsr;		/* UCCx data synchronization register */
-	__be16	ucce;		/* UCCx event register */
-	u8	res1[0x2];
-	__be16	uccm;		/* UCCx mask register */
-	u8	res2[0x1];
-	u8	uccs;		/* UCCx status register */
-	u8	res3[0x24];
-	__be16	utpt;
-	u8	res4[0x52];
-	u8	guemr;		/* UCC general extended mode register */
-} __attribute__ ((packed));
-
-/* QE UCC Fast */
-struct ucc_fast {
-	__be32	gumr;		/* UCCx general mode register */
-	__be32	upsmr;		/* UCCx protocol-specific mode register */
-	__be16	utodr;		/* UCCx transmit on demand register */
-	u8	res0[0x2];
-	__be16	udsr;		/* UCCx data synchronization register */
-	u8	res1[0x2];
-	__be32	ucce;		/* UCCx event register */
-	__be32	uccm;		/* UCCx mask register */
-	u8	uccs;		/* UCCx status register */
-	u8	res2[0x7];
-	__be32	urfb;		/* UCC receive FIFO base */
-	__be16	urfs;		/* UCC receive FIFO size */
-	u8	res3[0x2];
-	__be16	urfet;		/* UCC receive FIFO emergency threshold */
-	__be16	urfset;		/* UCC receive FIFO special emergency
-				   threshold */
-	__be32	utfb;		/* UCC transmit FIFO base */
-	__be16	utfs;		/* UCC transmit FIFO size */
-	u8	res4[0x2];
-	__be16	utfet;		/* UCC transmit FIFO emergency threshold */
-	u8	res5[0x2];
-	__be16	utftt;		/* UCC transmit FIFO transmit threshold */
-	u8	res6[0x2];
-	__be16	utpt;		/* UCC transmit polling timer */
-	u8	res7[0x2];
-	__be32	urtry;		/* UCC retry counter register */
-	u8	res8[0x4C];
-	u8	guemr;		/* UCC general extended mode register */
-} __attribute__ ((packed));
-
-struct ucc {
-	union {
-		struct	ucc_slow slow;
-		struct	ucc_fast fast;
-		u8	res[0x200];	/* UCC blocks are 512 bytes each */
-	};
-} __attribute__ ((packed));
-
-/* MultiPHY UTOPIA POS Controllers (UPC) */
-struct upc {
-	__be32	upgcr;		/* UTOPIA/POS general configuration register */
-	__be32	uplpa;		/* UTOPIA/POS last PHY address */
-	__be32	uphec;		/* ATM HEC register */
-	__be32	upuc;		/* UTOPIA/POS UCC configuration */
-	__be32	updc1;		/* UTOPIA/POS device 1 configuration */
-	__be32	updc2;		/* UTOPIA/POS device 2 configuration */
-	__be32	updc3;		/* UTOPIA/POS device 3 configuration */
-	__be32	updc4;		/* UTOPIA/POS device 4 configuration */
-	__be32	upstpa;		/* UTOPIA/POS STPA threshold */
-	u8	res0[0xC];
-	__be32	updrs1_h;	/* UTOPIA/POS device 1 rate select */
-	__be32	updrs1_l;	/* UTOPIA/POS device 1 rate select */
-	__be32	updrs2_h;	/* UTOPIA/POS device 2 rate select */
-	__be32	updrs2_l;	/* UTOPIA/POS device 2 rate select */
-	__be32	updrs3_h;	/* UTOPIA/POS device 3 rate select */
-	__be32	updrs3_l;	/* UTOPIA/POS device 3 rate select */
-	__be32	updrs4_h;	/* UTOPIA/POS device 4 rate select */
-	__be32	updrs4_l;	/* UTOPIA/POS device 4 rate select */
-	__be32	updrp1;		/* UTOPIA/POS device 1 receive priority low */
-	__be32	updrp2;		/* UTOPIA/POS device 2 receive priority low */
-	__be32	updrp3;		/* UTOPIA/POS device 3 receive priority low */
-	__be32	updrp4;		/* UTOPIA/POS device 4 receive priority low */
-	__be32	upde1;		/* UTOPIA/POS device 1 event */
-	__be32	upde2;		/* UTOPIA/POS device 2 event */
-	__be32	upde3;		/* UTOPIA/POS device 3 event */
-	__be32	upde4;		/* UTOPIA/POS device 4 event */
-	__be16	uprp1;
-	__be16	uprp2;
-	__be16	uprp3;
-	__be16	uprp4;
-	u8	res1[0x8];
-	__be16	uptirr1_0;	/* Device 1 transmit internal rate 0 */
-	__be16	uptirr1_1;	/* Device 1 transmit internal rate 1 */
-	__be16	uptirr1_2;	/* Device 1 transmit internal rate 2 */
-	__be16	uptirr1_3;	/* Device 1 transmit internal rate 3 */
-	__be16	uptirr2_0;	/* Device 2 transmit internal rate 0 */
-	__be16	uptirr2_1;	/* Device 2 transmit internal rate 1 */
-	__be16	uptirr2_2;	/* Device 2 transmit internal rate 2 */
-	__be16	uptirr2_3;	/* Device 2 transmit internal rate 3 */
-	__be16	uptirr3_0;	/* Device 3 transmit internal rate 0 */
-	__be16	uptirr3_1;	/* Device 3 transmit internal rate 1 */
-	__be16	uptirr3_2;	/* Device 3 transmit internal rate 2 */
-	__be16	uptirr3_3;	/* Device 3 transmit internal rate 3 */
-	__be16	uptirr4_0;	/* Device 4 transmit internal rate 0 */
-	__be16	uptirr4_1;	/* Device 4 transmit internal rate 1 */
-	__be16	uptirr4_2;	/* Device 4 transmit internal rate 2 */
-	__be16	uptirr4_3;	/* Device 4 transmit internal rate 3 */
-	__be32	uper1;		/* Device 1 port enable register */
-	__be32	uper2;		/* Device 2 port enable register */
-	__be32	uper3;		/* Device 3 port enable register */
-	__be32	uper4;		/* Device 4 port enable register */
-	u8	res2[0x150];
-} __attribute__ ((packed));
-
-/* SDMA */
-struct sdma {
-	__be32	sdsr;		/* Serial DMA status register */
-	__be32	sdmr;		/* Serial DMA mode register */
-	__be32	sdtr1;		/* SDMA system bus threshold register */
-	__be32	sdtr2;		/* SDMA secondary bus threshold register */
-	__be32	sdhy1;		/* SDMA system bus hysteresis register */
-	__be32	sdhy2;		/* SDMA secondary bus hysteresis register */
-	__be32	sdta1;		/* SDMA system bus address register */
-	__be32	sdta2;		/* SDMA secondary bus address register */
-	__be32	sdtm1;		/* SDMA system bus MSNUM register */
-	__be32	sdtm2;		/* SDMA secondary bus MSNUM register */
-	u8	res0[0x10];
-	__be32	sdaqr;		/* SDMA address bus qualify register */
-	__be32	sdaqmr;		/* SDMA address bus qualify mask register */
-	u8	res1[0x4];
-	__be32	sdebcr;		/* SDMA CAM entries base register */
-	u8	res2[0x38];
-} __attribute__ ((packed));
-
-/* Debug Space */
-struct dbg {
-	__be32	bpdcr;		/* Breakpoint debug command register */
-	__be32	bpdsr;		/* Breakpoint debug status register */
-	__be32	bpdmr;		/* Breakpoint debug mask register */
-	__be32	bprmrr0;	/* Breakpoint request mode risc register 0 */
-	__be32	bprmrr1;	/* Breakpoint request mode risc register 1 */
-	u8	res0[0x8];
-	__be32	bprmtr0;	/* Breakpoint request mode trb register 0 */
-	__be32	bprmtr1;	/* Breakpoint request mode trb register 1 */
-	u8	res1[0x8];
-	__be32	bprmir;		/* Breakpoint request mode immediate register */
-	__be32	bprmsr;		/* Breakpoint request mode serial register */
-	__be32	bpemr;		/* Breakpoint exit mode register */
-	u8	res2[0x48];
-} __attribute__ ((packed));
-
-/*
- * RISC Special Registers (Trap and Breakpoint).  These are described in
- * the QE Developer's Handbook.
- */
-struct rsp {
-	__be32 tibcr[16];	/* Trap/instruction breakpoint control regs */
-	u8 res0[64];
-	__be32 ibcr0;
-	__be32 ibs0;
-	__be32 ibcnr0;
-	u8 res1[4];
-	__be32 ibcr1;
-	__be32 ibs1;
-	__be32 ibcnr1;
-	__be32 npcr;
-	__be32 dbcr;
-	__be32 dbar;
-	__be32 dbamr;
-	__be32 dbsr;
-	__be32 dbcnr;
-	u8 res2[12];
-	__be32 dbdr_h;
-	__be32 dbdr_l;
-	__be32 dbdmr_h;
-	__be32 dbdmr_l;
-	__be32 bsr;
-	__be32 bor;
-	__be32 bior;
-	u8 res3[4];
-	__be32 iatr[4];
-	__be32 eccr;		/* Exception control configuration register */
-	__be32 eicr;
-	u8 res4[0x100-0xf8];
-} __attribute__ ((packed));
-
-struct qe_immap {
-	struct qe_iram		iram;		/* I-RAM */
-	struct qe_ic_regs	ic;		/* Interrupt Controller */
-	struct cp_qe		cp;		/* Communications Processor */
-	struct qe_mux		qmx;		/* QE Multiplexer */
-	struct qe_timers	qet;		/* QE Timers */
-	struct spi		spi[0x2];	/* spi */
-	struct qe_mcc		mcc;		/* mcc */
-	struct qe_brg		brg;		/* brg */
-	struct qe_usb_ctlr	usb;		/* USB */
-	struct si1		si1;		/* SI */
-	u8			res11[0x800];
-	struct sir		sir;		/* SI Routing Tables */
-	struct ucc		ucc1;		/* ucc1 */
-	struct ucc		ucc3;		/* ucc3 */
-	struct ucc		ucc5;		/* ucc5 */
-	struct ucc		ucc7;		/* ucc7 */
-	u8			res12[0x600];
-	struct upc		upc1;		/* MultiPHY UTOPIA POS Ctrlr 1*/
-	struct ucc		ucc2;		/* ucc2 */
-	struct ucc		ucc4;		/* ucc4 */
-	struct ucc		ucc6;		/* ucc6 */
-	struct ucc		ucc8;		/* ucc8 */
-	u8			res13[0x600];
-	struct upc		upc2;		/* MultiPHY UTOPIA POS Ctrlr 2*/
-	struct sdma		sdma;		/* SDMA */
-	struct dbg		dbg;		/* 0x104080 - 0x1040FF
-						   Debug Space */
-	struct rsp		rsp[0x2];	/* 0x104100 - 0x1042FF
-						   RISC Special Registers
-						   (Trap and Breakpoint) */
-	u8			res14[0x300];	/* 0x104300 - 0x1045FF */
-	u8			res15[0x3A00];	/* 0x104600 - 0x107FFF */
-	u8			res16[0x8000];	/* 0x108000 - 0x110000 */
-	u8			muram[0xC000];	/* 0x110000 - 0x11C000
-						   Multi-user RAM */
-	u8			res17[0x24000];	/* 0x11C000 - 0x140000 */
-	u8			res18[0xC0000];	/* 0x140000 - 0x200000 */
-} __attribute__ ((packed));
-
-extern struct qe_immap __iomem *qe_immr;
-extern phys_addr_t get_qe_base(void);
-
-/*
- * Returns the offset within the QE address space of the given pointer.
- *
- * Note that the QE does not support 36-bit physical addresses, so if
- * get_qe_base() returns a number above 4GB, the caller will probably fail.
- */
-static inline phys_addr_t immrbar_virt_to_phys(void *address)
-{
-	void *q = (void *)qe_immr;
-
-	/* Is it a MURAM address? */
-	if ((address >= q) && (address < (q + QE_IMMAP_SIZE)))
-		return get_qe_base() + (address - q);
-
-	/* It's an address returned by kmalloc */
-	return virt_to_phys(address);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 5879fde56..6c1297ec3 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -385,6 +385,17 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
 {
 	*(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
 }
+
+/*
+ * Real mode version of the above. stdcix is only supposed to be used
+ * in hypervisor real mode as per the architecture spec.
+ */
+static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
+{
+	__asm__ __volatile__("stdcix %0,0,%1"
+		: : "r" (val), "r" (paddr) : "memory");
+}
+
 #endif /* __powerpc64__ */
 
 /*
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 9fac01cb8..8f39796c9 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -154,8 +154,8 @@ extern void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat,
 			   bool upper, u32 val);
 extern void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr);
 extern int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu);
-extern pfn_t kvmppc_gpa_to_pfn(struct kvm_vcpu *vcpu, gpa_t gpa, bool writing,
-			bool *writable);
+extern kvm_pfn_t kvmppc_gpa_to_pfn(struct kvm_vcpu *vcpu, gpa_t gpa,
+			bool writing, bool *writable);
 extern void kvmppc_add_revmap_chain(struct kvm *kvm, struct revmap_entry *rev,
 			unsigned long *rmap, long pte_index, int realmode);
 extern void kvmppc_update_rmap_change(unsigned long *rmap, unsigned long psize);
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index cfa758c6b..c98afa538 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -38,8 +38,7 @@
 
 #define KVM_MAX_VCPUS		NR_CPUS
 #define KVM_MAX_VCORES		NR_CPUS
-#define KVM_USER_MEM_SLOTS 32
-#define KVM_MEM_SLOTS_NUM KVM_USER_MEM_SLOTS
+#define KVM_USER_MEM_SLOTS	512
 
 #ifdef CONFIG_KVM_MMIO
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
@@ -50,6 +49,10 @@
 #define KVM_NR_IRQCHIPS          1
 #define KVM_IRQCHIP_NUM_PINS     256
 
+/* PPC-specific vcpu->requests bit members */
+#define KVM_REQ_WATCHDOG           8
+#define KVM_REQ_EPR_EXIT           9
+
 #include <linux/mmu_notifier.h>
 
 #define KVM_ARCH_WANT_MMU_NOTIFIER
@@ -286,7 +289,7 @@ struct kvmppc_vcore {
 	struct list_head runnable_threads;
 	struct list_head preempt_list;
 	spinlock_t lock;
-	wait_queue_head_t wq;
+	struct swait_queue_head wq;
 	spinlock_t stoltb_lock;	/* protects stolen_tb and preempt_tb */
 	u64 stolen_tb;
 	u64 preempt_tb;
@@ -626,7 +629,7 @@ struct kvm_vcpu_arch {
 	u8 prodded;
 	u32 last_inst;
 
-	wait_queue_head_t *wqp;
+	struct swait_queue_head *wqp;
 	struct kvmppc_vcore *vcore;
 	int ret;
 	int trap;
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index c6ef05bd0..2241d5357 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -515,7 +515,7 @@ void kvmppc_claim_lpid(long lpid);
 void kvmppc_free_lpid(long lpid);
 void kvmppc_init_lpid(unsigned long nr_lpids);
 
-static inline void kvmppc_mmu_flush_icache(pfn_t pfn)
+static inline void kvmppc_mmu_flush_icache(kvm_pfn_t pfn)
 {
 	struct page *page;
 	/*
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index ba3342bbd..7352d3f21 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -21,7 +21,7 @@
  * need for various slices related matters. Note that this isn't the
  * complete pgtable.h but only a portion of it.
  */
-#include <asm/pgtable-ppc64.h>
+#include <asm/book3s/64/pgtable.h>
 #include <asm/bug.h>
 #include <asm/processor.h>
 
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index 9c326565d..c82cbf52d 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC32_H
-#define _ASM_POWERPC_PGTABLE_PPC32_H
+#ifndef _ASM_POWERPC_NOHASH_32_PGTABLE_H
+#define _ASM_POWERPC_NOHASH_32_PGTABLE_H
 
 #include <asm-generic/pgtable-nopmd.h>
 
@@ -106,17 +106,15 @@ extern int icache_44x_need_flush;
  */
 
 #if defined(CONFIG_40x)
-#include <asm/pte-40x.h>
+#include <asm/nohash/32/pte-40x.h>
 #elif defined(CONFIG_44x)
-#include <asm/pte-44x.h>
+#include <asm/nohash/32/pte-44x.h>
 #elif defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
-#include <asm/pte-book3e.h>
+#include <asm/nohash/pte-book3e.h>
 #elif defined(CONFIG_FSL_BOOKE)
-#include <asm/pte-fsl-booke.h>
+#include <asm/nohash/32/pte-fsl-booke.h>
 #elif defined(CONFIG_8xx)
-#include <asm/pte-8xx.h>
-#else /* CONFIG_6xx */
-#include <asm/pte-hash32.h>
+#include <asm/nohash/32/pte-8xx.h>
 #endif
 
 /* And here we include common definitions */
@@ -130,7 +128,12 @@ extern int icache_44x_need_flush;
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define	pmd_bad(pmd)		(pmd_val(pmd) & _PMD_BAD)
 #define	pmd_present(pmd)	(pmd_val(pmd) & _PMD_PRESENT_MASK)
-#define	pmd_clear(pmdp)		do { pmd_val(*(pmdp)) = 0; } while (0)
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	*pmdp = __pmd(0);
+}
+
+
 
 /*
  * When flushing the tlb entry for a page, we also need to flush the hash
@@ -337,4 +340,4 @@ extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
 
 #endif /* !__ASSEMBLY__ */
 
-#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */
+#endif /* __ASM_POWERPC_NOHASH_32_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/nohash/32/pte-40x.h
index 486b1ef81..9624ebdac 100644
--- a/arch/powerpc/include/asm/pte-40x.h
+++ b/arch/powerpc/include/asm/nohash/32/pte-40x.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_40x_H
-#define _ASM_POWERPC_PTE_40x_H
+#ifndef _ASM_POWERPC_NOHASH_32_PTE_40x_H
+#define _ASM_POWERPC_NOHASH_32_PTE_40x_H
 #ifdef __KERNEL__
 
 /*
@@ -61,4 +61,4 @@
 #define PTE_ATOMIC_UPDATES	1
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_40x_H */
+#endif /*  _ASM_POWERPC_NOHASH_32_PTE_40x_H */
diff --git a/arch/powerpc/include/asm/pte-44x.h b/arch/powerpc/include/asm/nohash/32/pte-44x.h
index 36f75fab2..fdab41c65 100644
--- a/arch/powerpc/include/asm/pte-44x.h
+++ b/arch/powerpc/include/asm/nohash/32/pte-44x.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_44x_H
-#define _ASM_POWERPC_PTE_44x_H
+#ifndef _ASM_POWERPC_NOHASH_32_PTE_44x_H
+#define _ASM_POWERPC_NOHASH_32_PTE_44x_H
 #ifdef __KERNEL__
 
 /*
@@ -94,4 +94,4 @@
 
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_44x_H */
+#endif /*  _ASM_POWERPC_NOHASH_32_PTE_44x_H */
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/nohash/32/pte-8xx.h
index a0e2ba960..3742b1919 100644
--- a/arch/powerpc/include/asm/pte-8xx.h
+++ b/arch/powerpc/include/asm/nohash/32/pte-8xx.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_8xx_H
-#define _ASM_POWERPC_PTE_8xx_H
+#ifndef _ASM_POWERPC_NOHASH_32_PTE_8xx_H
+#define _ASM_POWERPC_NOHASH_32_PTE_8xx_H
 #ifdef __KERNEL__
 
 /*
@@ -62,4 +62,4 @@
 				 _PAGE_HWWRITE | _PAGE_EXEC)
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_8xx_H */
+#endif /*  _ASM_POWERPC_NOHASH_32_PTE_8xx_H */
diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/nohash/32/pte-fsl-booke.h
index 9f5c3d04a..5422d00c6 100644
--- a/arch/powerpc/include/asm/pte-fsl-booke.h
+++ b/arch/powerpc/include/asm/nohash/32/pte-fsl-booke.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_FSL_BOOKE_H
-#define _ASM_POWERPC_PTE_FSL_BOOKE_H
+#ifndef _ASM_POWERPC_NOHASH_32_PTE_FSL_BOOKE_H
+#define _ASM_POWERPC_NOHASH_32_PTE_FSL_BOOKE_H
 #ifdef __KERNEL__
 
 /* PTE bit definitions for Freescale BookE SW loaded TLB MMU based
@@ -37,4 +37,4 @@
 #define PTE_WIMGE_SHIFT (6)
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_FSL_BOOKE_H */
+#endif /*  _ASM_POWERPC_NOHASH_32_PTE_FSL_BOOKE_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64-4k.h b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h
index 132ee1d48..fc7d51753 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64-4k.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC64_4K_H
-#define _ASM_POWERPC_PGTABLE_PPC64_4K_H
+#ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H
+#define _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H
 /*
  * Entries per page directory level.  The PTE level must use a 64b record
  * for each page table entry.  The PMD and PGD level use a 32b record for
@@ -55,11 +55,15 @@
 #define pgd_none(pgd)		(!pgd_val(pgd))
 #define pgd_bad(pgd)		(pgd_val(pgd) == 0)
 #define pgd_present(pgd)	(pgd_val(pgd) != 0)
-#define pgd_clear(pgdp)		(pgd_val(*(pgdp)) = 0)
 #define pgd_page_vaddr(pgd)	(pgd_val(pgd) & ~PGD_MASKED_BITS)
 
 #ifndef __ASSEMBLY__
 
+static inline void pgd_clear(pgd_t *pgdp)
+{
+	*pgdp = __pgd(0);
+}
+
 static inline pte_t pgd_pte(pgd_t pgd)
 {
 	return __pte(pgd_val(pgd));
@@ -85,4 +89,4 @@ extern struct page *pgd_page(pgd_t pgd);
 #define remap_4k_pfn(vma, addr, pfn, prot)	\
 	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
 
-#endif /* _ASM_POWERPC_PGTABLE_PPC64_4K_H */
+#endif /* _ _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64-64k.h b/arch/powerpc/include/asm/nohash/64/pgtable-64k.h
index 1de35bbd0..570fb30be 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64-64k.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable-64k.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC64_64K_H
-#define _ASM_POWERPC_PGTABLE_PPC64_64K_H
+#ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_64K_H
+#define _ASM_POWERPC_NOHASH_64_PGTABLE_64K_H
 
 #include <asm-generic/pgtable-nopud.h>
 
@@ -9,8 +9,19 @@
 #define PUD_INDEX_SIZE	0
 #define PGD_INDEX_SIZE  12
 
+/*
+ * we support 32 fragments per PTE page of 64K size
+ */
+#define PTE_FRAG_NR	32
+/*
+ * We use a 2K PTE page fragment and another 2K for storing
+ * real_pte_t hash index
+ */
+#define PTE_FRAG_SIZE_SHIFT  11
+#define PTE_FRAG_SIZE (1UL << PTE_FRAG_SIZE_SHIFT)
+
 #ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE	(sizeof(real_pte_t) << PTE_INDEX_SIZE)
+#define PTE_TABLE_SIZE	PTE_FRAG_SIZE
 #define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
 #define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
 #endif	/* __ASSEMBLY__ */
@@ -32,13 +43,15 @@
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 
-/* Bits to mask out from a PMD to get to the PTE page */
-/* PMDs point to PTE table fragments which are 4K aligned.  */
-#define PMD_MASKED_BITS		0xfff
+/*
+ * Bits to mask out from a PMD to get to the PTE page
+ * PMDs point to PTE table fragments which are PTE_FRAG_SIZE aligned.
+ */
+#define PMD_MASKED_BITS		(PTE_FRAG_SIZE - 1)
 /* Bits to mask out from a PGD/PUD to get to the PMD page */
 #define PUD_MASKED_BITS		0x1ff
 
 #define pgd_pte(pgd)	(pud_pte(((pud_t){ pgd })))
 #define pte_pgd(pte)	((pgd_t)pte_pud(pte))
 
-#endif /* _ASM_POWERPC_PGTABLE_PPC64_64K_H */
+#endif /* _ASM_POWERPC_NOHASH_64_PGTABLE_64K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/nohash/64/pgtable.h
index 3245f2d96..b9f734dd5 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable.h
@@ -1,14 +1,14 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_
-#define _ASM_POWERPC_PGTABLE_PPC64_H_
+#ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_H
+#define _ASM_POWERPC_NOHASH_64_PGTABLE_H
 /*
  * This file contains the functions and defines necessary to modify and use
  * the ppc64 hashed page table.
  */
 
 #ifdef CONFIG_PPC_64K_PAGES
-#include <asm/pgtable-ppc64-64k.h>
+#include <asm/nohash/64/pgtable-64k.h>
 #else
-#include <asm/pgtable-ppc64-4k.h>
+#include <asm/nohash/64/pgtable-4k.h>
 #endif
 #include <asm/barrier.h>
 
@@ -18,7 +18,7 @@
  * Size of EA range mapped by our pagetables.
  */
 #define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
-                	    PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
+			    PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
 #define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE)
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -97,11 +97,7 @@
 /*
  * Include the PTE bits definitions
  */
-#ifdef CONFIG_PPC_BOOK3S
-#include <asm/pte-hash64.h>
-#else
-#include <asm/pte-book3e.h>
-#endif
+#include <asm/nohash/pte-book3e.h>
 #include <asm/pte-common.h>
 
 #ifdef CONFIG_PPC_MM_SLICES
@@ -110,59 +106,47 @@
 #endif /* CONFIG_PPC_MM_SLICES */
 
 #ifndef __ASSEMBLY__
-
-/*
- * This is the default implementation of various PTE accessors, it's
- * used in all cases except Book3S with 64K pages where we have a
- * concept of sub-pages
- */
-#ifndef __real_pte
-
-#ifdef CONFIG_STRICT_MM_TYPECHECKS
-#define __real_pte(e,p)		((real_pte_t){(e)})
-#define __rpte_to_pte(r)	((r).pte)
-#else
-#define __real_pte(e,p)		(e)
-#define __rpte_to_pte(r)	(__pte(r))
-#endif
-#define __rpte_to_hidx(r,index)	(pte_val(__rpte_to_pte(r)) >> 12)
-
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)       \
-	do {							         \
-		index = 0;					         \
-		shift = mmu_psize_defs[psize].shift;		         \
-
-#define pte_iterate_hashed_end() } while(0)
-
-/*
- * We expect this to be called only for user addresses or kernel virtual
- * addresses other than the linear mapping.
- */
-#define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
-
-#endif /* __real_pte */
-
-
 /* pte_clear moved to later in this file */
 
 #define PMD_BAD_BITS		(PTE_TABLE_SIZE-1)
 #define PUD_BAD_BITS		(PMD_TABLE_SIZE-1)
 
-#define pmd_set(pmdp, pmdval) 	(pmd_val(*(pmdp)) = (pmdval))
+static inline void pmd_set(pmd_t *pmdp, unsigned long val)
+{
+	*pmdp = __pmd(val);
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	*pmdp = __pmd(0);
+}
+
+static inline pte_t pmd_pte(pmd_t pmd)
+{
+	return __pte(pmd_val(pmd));
+}
+
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define	pmd_bad(pmd)		(!is_kernel_addr(pmd_val(pmd)) \
 				 || (pmd_val(pmd) & PMD_BAD_BITS))
 #define	pmd_present(pmd)	(!pmd_none(pmd))
-#define	pmd_clear(pmdp)		(pmd_val(*(pmdp)) = 0)
 #define pmd_page_vaddr(pmd)	(pmd_val(pmd) & ~PMD_MASKED_BITS)
 extern struct page *pmd_page(pmd_t pmd);
 
-#define pud_set(pudp, pudval)	(pud_val(*(pudp)) = (pudval))
+static inline void pud_set(pud_t *pudp, unsigned long val)
+{
+	*pudp = __pud(val);
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	*pudp = __pud(0);
+}
+
 #define pud_none(pud)		(!pud_val(pud))
 #define	pud_bad(pud)		(!is_kernel_addr(pud_val(pud)) \
 				 || (pud_val(pud) & PUD_BAD_BITS))
 #define pud_present(pud)	(pud_val(pud) != 0)
-#define pud_clear(pudp)		(pud_val(*(pudp)) = 0)
 #define pud_page_vaddr(pud)	(pud_val(pud) & ~PUD_MASKED_BITS)
 
 extern struct page *pud_page(pud_t pud);
@@ -177,9 +161,13 @@ static inline pud_t pte_pud(pte_t pte)
 	return __pud(pte_val(pte));
 }
 #define pud_write(pud)		pte_write(pud_pte(pud))
-#define pgd_set(pgdp, pudp)	({pgd_val(*(pgdp)) = (unsigned long)(pudp);})
 #define pgd_write(pgd)		pte_write(pgd_pte(pgd))
 
+static inline void pgd_set(pgd_t *pgdp, unsigned long val)
+{
+	*pgdp = __pgd(val);
+}
+
 /*
  * Find an entry in a page-table-directory.  We combine the address region
  * (the high order N bits) and the pgd portion of the address.
@@ -373,254 +361,4 @@ void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
 void pgtable_cache_init(void);
 #endif /* __ASSEMBLY__ */
 
-/*
- * THP pages can't be special. So use the _PAGE_SPECIAL
- */
-#define _PAGE_SPLITTING _PAGE_SPECIAL
-
-/*
- * We need to differentiate between explicit huge page and THP huge
- * page, since THP huge page also need to track real subpage details
- */
-#define _PAGE_THP_HUGE  _PAGE_4K_PFN
-
-/*
- * set of bits not changed in pmd_modify.
- */
-#define _HPAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS |		\
-			 _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_SPLITTING | \
-			 _PAGE_THP_HUGE)
-
-#ifndef __ASSEMBLY__
-/*
- * The linux hugepage PMD now include the pmd entries followed by the address
- * to the stashed pgtable_t. The stashed pgtable_t contains the hpte bits.
- * [ 1 bit secondary | 3 bit hidx | 1 bit valid | 000]. We use one byte per
- * each HPTE entry. With 16MB hugepage and 64K HPTE we need 256 entries and
- * with 4K HPTE we need 4096 entries. Both will fit in a 4K pgtable_t.
- *
- * The last three bits are intentionally left to zero. This memory location
- * are also used as normal page PTE pointers. So if we have any pointers
- * left around while we collapse a hugepage, we need to make sure
- * _PAGE_PRESENT bit of that is zero when we look at them
- */
-static inline unsigned int hpte_valid(unsigned char *hpte_slot_array, int index)
-{
-	return (hpte_slot_array[index] >> 3) & 0x1;
-}
-
-static inline unsigned int hpte_hash_index(unsigned char *hpte_slot_array,
-					   int index)
-{
-	return hpte_slot_array[index] >> 4;
-}
-
-static inline void mark_hpte_slot_valid(unsigned char *hpte_slot_array,
-					unsigned int index, unsigned int hidx)
-{
-	hpte_slot_array[index] = hidx << 4 | 0x1 << 3;
-}
-
-struct page *realmode_pfn_to_page(unsigned long pfn);
-
-static inline char *get_hpte_slot_array(pmd_t *pmdp)
-{
-	/*
-	 * The hpte hindex is stored in the pgtable whose address is in the
-	 * second half of the PMD
-	 *
-	 * Order this load with the test for pmd_trans_huge in the caller
-	 */
-	smp_rmb();
-	return *(char **)(pmdp + PTRS_PER_PMD);
-
-
-}
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-extern void hpte_do_hugepage_flush(struct mm_struct *mm, unsigned long addr,
-				   pmd_t *pmdp, unsigned long old_pmd);
-extern pmd_t pfn_pmd(unsigned long pfn, pgprot_t pgprot);
-extern pmd_t mk_pmd(struct page *page, pgprot_t pgprot);
-extern pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot);
-extern void set_pmd_at(struct mm_struct *mm, unsigned long addr,
-		       pmd_t *pmdp, pmd_t pmd);
-extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
-				 pmd_t *pmd);
-/*
- *
- * For core kernel code by design pmd_trans_huge is never run on any hugetlbfs
- * page. The hugetlbfs page table walking and mangling paths are totally
- * separated form the core VM paths and they're differentiated by
- *  VM_HUGETLB being set on vm_flags well before any pmd_trans_huge could run.
- *
- * pmd_trans_huge() is defined as false at build time if
- * CONFIG_TRANSPARENT_HUGEPAGE=n to optimize away code blocks at build
- * time in such case.
- *
- * For ppc64 we need to differntiate from explicit hugepages from THP, because
- * for THP we also track the subpage details at the pmd level. We don't do
- * that for explicit huge pages.
- *
- */
-static inline int pmd_trans_huge(pmd_t pmd)
-{
-	/*
-	 * leaf pte for huge page, bottom two bits != 00
-	 */
-	return (pmd_val(pmd) & 0x3) && (pmd_val(pmd) & _PAGE_THP_HUGE);
-}
-
-static inline int pmd_trans_splitting(pmd_t pmd)
-{
-	if (pmd_trans_huge(pmd))
-		return pmd_val(pmd) & _PAGE_SPLITTING;
-	return 0;
-}
-
-extern int has_transparent_hugepage(void);
-#else
-static inline void hpte_do_hugepage_flush(struct mm_struct *mm,
-					  unsigned long addr, pmd_t *pmdp,
-					  unsigned long old_pmd)
-{
-
-	WARN(1, "%s called with THP disabled\n", __func__);
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-
-static inline int pmd_large(pmd_t pmd)
-{
-	/*
-	 * leaf pte for huge page, bottom two bits != 00
-	 */
-	return ((pmd_val(pmd) & 0x3) != 0x0);
-}
-
-static inline pte_t pmd_pte(pmd_t pmd)
-{
-	return __pte(pmd_val(pmd));
-}
-
-static inline pmd_t pte_pmd(pte_t pte)
-{
-	return __pmd(pte_val(pte));
-}
-
-static inline pte_t *pmdp_ptep(pmd_t *pmd)
-{
-	return (pte_t *)pmd;
-}
-
-#define pmd_pfn(pmd)		pte_pfn(pmd_pte(pmd))
-#define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
-#define pmd_young(pmd)		pte_young(pmd_pte(pmd))
-#define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
-#define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
-#define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
-#define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
-#define pmd_mkwrite(pmd)	pte_pmd(pte_mkwrite(pmd_pte(pmd)))
-
-#define __HAVE_ARCH_PMD_WRITE
-#define pmd_write(pmd)		pte_write(pmd_pte(pmd))
-
-static inline pmd_t pmd_mkhuge(pmd_t pmd)
-{
-	/* Do nothing, mk_pmd() does this part.  */
-	return pmd;
-}
-
-static inline pmd_t pmd_mknotpresent(pmd_t pmd)
-{
-	pmd_val(pmd) &= ~_PAGE_PRESENT;
-	return pmd;
-}
-
-static inline pmd_t pmd_mksplitting(pmd_t pmd)
-{
-	pmd_val(pmd) |= _PAGE_SPLITTING;
-	return pmd;
-}
-
-#define __HAVE_ARCH_PMD_SAME
-static inline int pmd_same(pmd_t pmd_a, pmd_t pmd_b)
-{
-	return (((pmd_val(pmd_a) ^ pmd_val(pmd_b)) & ~_PAGE_HPTEFLAGS) == 0);
-}
-
-#define __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
-extern int pmdp_set_access_flags(struct vm_area_struct *vma,
-				 unsigned long address, pmd_t *pmdp,
-				 pmd_t entry, int dirty);
-
-extern unsigned long pmd_hugepage_update(struct mm_struct *mm,
-					 unsigned long addr,
-					 pmd_t *pmdp,
-					 unsigned long clr,
-					 unsigned long set);
-
-static inline int __pmdp_test_and_clear_young(struct mm_struct *mm,
-					      unsigned long addr, pmd_t *pmdp)
-{
-	unsigned long old;
-
-	if ((pmd_val(*pmdp) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
-		return 0;
-	old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED, 0);
-	return ((old & _PAGE_ACCESSED) != 0);
-}
-
-#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
-extern int pmdp_test_and_clear_young(struct vm_area_struct *vma,
-				     unsigned long address, pmd_t *pmdp);
-#define __HAVE_ARCH_PMDP_CLEAR_YOUNG_FLUSH
-extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
-				  unsigned long address, pmd_t *pmdp);
-
-#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
-extern pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
-				     unsigned long addr, pmd_t *pmdp);
-
-#define __HAVE_ARCH_PMDP_SET_WRPROTECT
-static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr,
-				      pmd_t *pmdp)
-{
-
-	if ((pmd_val(*pmdp) & _PAGE_RW) == 0)
-		return;
-
-	pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW, 0);
-}
-
-#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
-extern void pmdp_splitting_flush(struct vm_area_struct *vma,
-				 unsigned long address, pmd_t *pmdp);
-
-extern pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
-				 unsigned long address, pmd_t *pmdp);
-#define pmdp_collapse_flush pmdp_collapse_flush
-
-#define __HAVE_ARCH_PGTABLE_DEPOSIT
-extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
-				       pgtable_t pgtable);
-#define __HAVE_ARCH_PGTABLE_WITHDRAW
-extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
-
-#define __HAVE_ARCH_PMDP_INVALIDATE
-extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
-			    pmd_t *pmdp);
-
-#define pmd_move_must_withdraw pmd_move_must_withdraw
-struct spinlock;
-static inline int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
-					 struct spinlock *old_pmd_ptl)
-{
-	/*
-	 * Archs like ppc64 use pgtable to store per pmd
-	 * specific information. So when we switch the pmd,
-	 * we should also withdraw and deposit the pgtable
-	 */
-	return true;
-}
-#endif /* __ASSEMBLY__ */
-#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
+#endif /* _ASM_POWERPC_NOHASH_64_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/nohash/pgtable.h b/arch/powerpc/include/asm/nohash/pgtable.h
new file mode 100644
index 000000000..1263c22d6
--- /dev/null
+++ b/arch/powerpc/include/asm/nohash/pgtable.h
@@ -0,0 +1,252 @@
+#ifndef _ASM_POWERPC_NOHASH_PGTABLE_H
+#define _ASM_POWERPC_NOHASH_PGTABLE_H
+
+#if defined(CONFIG_PPC64)
+#include <asm/nohash/64/pgtable.h>
+#else
+#include <asm/nohash/32/pgtable.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* Generic accessors to PTE bits */
+static inline int pte_write(pte_t pte)
+{
+	return (pte_val(pte) & (_PAGE_RW | _PAGE_RO)) != _PAGE_RO;
+}
+static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_special(pte_t pte)	{ return pte_val(pte) & _PAGE_SPECIAL; }
+static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; }
+static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
+
+#ifdef CONFIG_NUMA_BALANCING
+/*
+ * These work without NUMA balancing but the kernel does not care. See the
+ * comment in include/asm-generic/pgtable.h . On powerpc, this will only
+ * work for user pages and always return true for kernel pages.
+ */
+static inline int pte_protnone(pte_t pte)
+{
+	return (pte_val(pte) &
+		(_PAGE_PRESENT | _PAGE_USER)) == _PAGE_PRESENT;
+}
+
+static inline int pmd_protnone(pmd_t pmd)
+{
+	return pte_protnone(pmd_pte(pmd));
+}
+#endif /* CONFIG_NUMA_BALANCING */
+
+static inline int pte_present(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_PRESENT;
+}
+
+/* Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * Even if PTEs can be unsigned long long, a PFN is always an unsigned
+ * long for now.
+ */
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) {
+	return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) |
+		     pgprot_val(pgprot)); }
+static inline unsigned long pte_pfn(pte_t pte)	{
+	return pte_val(pte) >> PTE_RPN_SHIFT; }
+
+/* Generic modifiers for PTE bits */
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte_basic_t ptev;
+
+	ptev = pte_val(pte) & ~(_PAGE_RW | _PAGE_HWWRITE);
+	ptev |= _PAGE_RO;
+	return __pte(ptev);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~(_PAGE_DIRTY | _PAGE_HWWRITE));
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_basic_t ptev;
+
+	ptev = pte_val(pte) & ~_PAGE_RO;
+	ptev |= _PAGE_RW;
+	return __pte(ptev);
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SPECIAL);
+}
+
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	return pte;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+/* Insert a PTE, top-level function is out of line. It uses an inline
+ * low level function in the respective pgtable-* files
+ */
+extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+		       pte_t pte);
+
+/* This low level function performs the actual PTE insertion
+ * Setting the PTE depends on the MMU type and other factors. It's
+ * an horrible mess that I'm not going to try to clean up now but
+ * I'm keeping it in one place rather than spread around
+ */
+static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
+				pte_t *ptep, pte_t pte, int percpu)
+{
+#if defined(CONFIG_PPC_STD_MMU_32) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
+	/* First case is 32-bit Hash MMU in SMP mode with 32-bit PTEs. We use the
+	 * helper pte_update() which does an atomic update. We need to do that
+	 * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a
+	 * per-CPU PTE such as a kmap_atomic, we do a simple update preserving
+	 * the hash bits instead (ie, same as the non-SMP case)
+	 */
+	if (percpu)
+		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+			      | (pte_val(pte) & ~_PAGE_HASHPTE));
+	else
+		pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte));
+
+#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
+	/* Second case is 32-bit with 64-bit PTE.  In this case, we
+	 * can just store as long as we do the two halves in the right order
+	 * with a barrier in between. This is possible because we take care,
+	 * in the hash code, to pre-invalidate if the PTE was already hashed,
+	 * which synchronizes us with any concurrent invalidation.
+	 * In the percpu case, we also fallback to the simple update preserving
+	 * the hash bits
+	 */
+	if (percpu) {
+		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+			      | (pte_val(pte) & ~_PAGE_HASHPTE));
+		return;
+	}
+#if _PAGE_HASHPTE != 0
+	if (pte_val(*ptep) & _PAGE_HASHPTE)
+		flush_hash_entry(mm, ptep, addr);
+#endif
+	__asm__ __volatile__("\
+		stw%U0%X0 %2,%0\n\
+		eieio\n\
+		stw%U0%X0 %L2,%1"
+	: "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
+	: "r" (pte) : "memory");
+
+#elif defined(CONFIG_PPC_STD_MMU_32)
+	/* Third case is 32-bit hash table in UP mode, we need to preserve
+	 * the _PAGE_HASHPTE bit since we may not have invalidated the previous
+	 * translation in the hash yet (done in a subsequent flush_tlb_xxx())
+	 * and see we need to keep track that this PTE needs invalidating
+	 */
+	*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+		      | (pte_val(pte) & ~_PAGE_HASHPTE));
+
+#else
+	/* Anything else just stores the PTE normally. That covers all 64-bit
+	 * cases, and 32-bit non-hash with 32-bit PTEs.
+	 */
+	*ptep = pte;
+
+#ifdef CONFIG_PPC_BOOK3E_64
+	/*
+	 * With hardware tablewalk, a sync is needed to ensure that
+	 * subsequent accesses see the PTE we just wrote.  Unlike userspace
+	 * mappings, we can't tolerate spurious faults, so make sure
+	 * the new PTE will be seen the first time.
+	 */
+	if (is_kernel_addr(addr))
+		mb();
+#endif
+#endif
+}
+
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
+				 pte_t *ptep, pte_t entry, int dirty);
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL	(_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \
+			 _PAGE_WRITETHRU)
+
+#define pgprot_noncached(prot)	  (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+				            _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+#define pgprot_noncached_wc(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+				            _PAGE_NO_CACHE))
+
+#define pgprot_cached(prot)       (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+				            _PAGE_COHERENT))
+
+#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+				            _PAGE_COHERENT | _PAGE_WRITETHRU))
+
+#define pgprot_cached_noncoherent(prot) \
+		(__pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL))
+
+#define pgprot_writecombine pgprot_noncached_wc
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#ifdef CONFIG_HUGETLB_PAGE
+static inline int hugepd_ok(hugepd_t hpd)
+{
+	return (hpd.pd > 0);
+}
+
+static inline int pmd_huge(pmd_t pmd)
+{
+	return 0;
+}
+
+static inline int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
+static inline int pgd_huge(pgd_t pgd)
+{
+	return 0;
+}
+#define pgd_huge		pgd_huge
+
+#define is_hugepd(hpd)		(hugepd_ok(hpd))
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/nohash/pte-book3e.h
index 8d8473278..e16807b78 100644
--- a/arch/powerpc/include/asm/pte-book3e.h
+++ b/arch/powerpc/include/asm/nohash/pte-book3e.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_BOOK3E_H
-#define _ASM_POWERPC_PTE_BOOK3E_H
+#ifndef _ASM_POWERPC_NOHASH_PTE_BOOK3E_H
+#define _ASM_POWERPC_NOHASH_PTE_BOOK3E_H
 #ifdef __KERNEL__
 
 /* PTE bit definitions for processors compliant to the Book3E
@@ -84,4 +84,4 @@
 #endif
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_FSL_BOOKE_H */
+#endif /*  _ASM_POWERPC_NOHASH_PTE_BOOK3E_H */
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 8374afed9..f8faaaeec 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -157,7 +157,8 @@
 #define OPAL_LEDS_GET_INDICATOR			114
 #define OPAL_LEDS_SET_INDICATOR			115
 #define OPAL_CEC_REBOOT2			116
-#define OPAL_LAST				116
+#define OPAL_CONSOLE_FLUSH			117
+#define OPAL_LAST				117
 
 /* Device tree flags */
 
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 800115910..07a99e638 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -35,6 +35,7 @@ int64_t opal_console_read(int64_t term_number, __be64 *length,
 			  uint8_t *buffer);
 int64_t opal_console_write_buffer_space(int64_t term_number,
 					__be64 *length);
+int64_t opal_console_flush(int64_t term_number);
 int64_t opal_rtc_read(__be32 *year_month_day,
 		      __be64 *hour_minute_second_millisecond);
 int64_t opal_rtc_write(uint32_t year_month_day,
@@ -262,6 +263,8 @@ extern int opal_resync_timebase(void);
 
 extern void opal_lpc_init(void);
 
+extern void opal_kmsg_init(void);
+
 extern int opal_event_request(unsigned int opal_event_nr);
 
 struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr,
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 70bd4381f..546540b91 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -16,6 +16,7 @@
 
 #ifdef CONFIG_PPC64
 
+#include <linux/string.h>
 #include <asm/types.h>
 #include <asm/lppaca.h>
 #include <asm/mmu.h>
@@ -131,7 +132,16 @@ struct paca_struct {
 	struct tlb_core_data tcd;
 #endif /* CONFIG_PPC_BOOK3E */
 
-	mm_context_t context;
+#ifdef CONFIG_PPC_BOOK3S
+	mm_context_id_t mm_ctx_id;
+#ifdef CONFIG_PPC_MM_SLICES
+	u64 mm_ctx_low_slices_psize;
+	unsigned char mm_ctx_high_slices_psize[SLICE_ARRAY_SIZE];
+#else
+	u16 mm_ctx_user_psize;
+	u16 mm_ctx_sllp;
+#endif
+#endif
 
 	/*
 	 * then miscellaneous read-write fields
@@ -194,6 +204,23 @@ struct paca_struct {
 #endif
 };
 
+#ifdef CONFIG_PPC_BOOK3S
+static inline void copy_mm_to_paca(mm_context_t *context)
+{
+	get_paca()->mm_ctx_id = context->id;
+#ifdef CONFIG_PPC_MM_SLICES
+	get_paca()->mm_ctx_low_slices_psize = context->low_slices_psize;
+	memcpy(&get_paca()->mm_ctx_high_slices_psize,
+	       &context->high_slices_psize, SLICE_ARRAY_SIZE);
+#else
+	get_paca()->mm_ctx_user_psize = context->user_psize;
+	get_paca()->mm_ctx_sllp = context->sllp;
+#endif
+}
+#else
+static inline void copy_mm_to_paca(mm_context_t *context){}
+#endif
+
 extern struct paca_struct *paca;
 extern void initialise_paca(struct paca_struct *new_paca, int cpu);
 extern void setup_paca(struct paca_struct *new_paca);
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 3140c19c4..e34124f6f 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -286,8 +286,11 @@ extern long long virt_phys_offset;
 
 /* PTE level */
 typedef struct { pte_basic_t pte; } pte_t;
-#define pte_val(x)	((x).pte)
 #define __pte(x)	((pte_t) { (x) })
+static inline pte_basic_t pte_val(pte_t x)
+{
+	return x.pte;
+}
 
 /* 64k pages additionally define a bigger "real PTE" type that gathers
  * the "second half" part of the PTE for pseudo 64k pages
@@ -301,21 +304,30 @@ typedef struct { pte_t pte; } real_pte_t;
 /* PMD level */
 #ifdef CONFIG_PPC64
 typedef struct { unsigned long pmd; } pmd_t;
-#define pmd_val(x)	((x).pmd)
 #define __pmd(x)	((pmd_t) { (x) })
+static inline unsigned long pmd_val(pmd_t x)
+{
+	return x.pmd;
+}
 
 /* PUD level exusts only on 4k pages */
 #ifndef CONFIG_PPC_64K_PAGES
 typedef struct { unsigned long pud; } pud_t;
-#define pud_val(x)	((x).pud)
 #define __pud(x)	((pud_t) { (x) })
+static inline unsigned long pud_val(pud_t x)
+{
+	return x.pud;
+}
 #endif /* !CONFIG_PPC_64K_PAGES */
 #endif /* CONFIG_PPC64 */
 
 /* PGD level */
 typedef struct { unsigned long pgd; } pgd_t;
-#define pgd_val(x)	((x).pgd)
 #define __pgd(x)	((pgd_t) { (x) })
+static inline unsigned long pgd_val(pgd_t x)
+{
+	return x.pgd;
+}
 
 /* Page protection bits */
 typedef struct { unsigned long pgprot; } pgprot_t;
@@ -329,8 +341,11 @@ typedef struct { unsigned long pgprot; } pgprot_t;
  */
 
 typedef pte_basic_t pte_t;
-#define pte_val(x)	(x)
 #define __pte(x)	(x)
+static inline pte_basic_t pte_val(pte_t pte)
+{
+	return pte;
+}
 
 #if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC_STD_MMU_64)
 typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
@@ -341,67 +356,42 @@ typedef pte_t real_pte_t;
 
 #ifdef CONFIG_PPC64
 typedef unsigned long pmd_t;
-#define pmd_val(x)	(x)
 #define __pmd(x)	(x)
+static inline unsigned long pmd_val(pmd_t pmd)
+{
+	return pmd;
+}
 
 #ifndef CONFIG_PPC_64K_PAGES
 typedef unsigned long pud_t;
-#define pud_val(x)	(x)
 #define __pud(x)	(x)
+static inline unsigned long pud_val(pud_t pud)
+{
+	return pud;
+}
 #endif /* !CONFIG_PPC_64K_PAGES */
 #endif /* CONFIG_PPC64 */
 
 typedef unsigned long pgd_t;
-#define pgd_val(x)	(x)
-#define pgprot_val(x)	(x)
+#define __pgd(x)	(x)
+static inline unsigned long pgd_val(pgd_t pgd)
+{
+	return pgd;
+}
 
 typedef unsigned long pgprot_t;
-#define __pgd(x)	(x)
+#define pgprot_val(x)	(x)
 #define __pgprot(x)	(x)
 
 #endif
 
 typedef struct { signed long pd; } hugepd_t;
 
-#ifdef CONFIG_HUGETLB_PAGE
-#ifdef CONFIG_PPC_BOOK3S_64
-#ifdef CONFIG_PPC_64K_PAGES
-/*
- * With 64k page size, we have hugepage ptes in the pgd and pmd entries. We don't
- * need to setup hugepage directory for them. Our pte and page directory format
- * enable us to have this enabled. But to avoid errors when implementing new
- * features disable hugepd for 64K. We enable a debug version here, So we catch
- * wrong usage.
- */
-#ifdef CONFIG_DEBUG_VM
-extern int hugepd_ok(hugepd_t hpd);
-#else
-#define hugepd_ok(x)	(0)
-#endif
-#else
-static inline int hugepd_ok(hugepd_t hpd)
-{
-	/*
-	 * hugepd pointer, bottom two bits == 00 and next 4 bits
-	 * indicate size of table
-	 */
-	return (((hpd.pd & 0x3) == 0x0) && ((hpd.pd & HUGEPD_SHIFT_MASK) != 0));
-}
-#endif
-#else
-static inline int hugepd_ok(hugepd_t hpd)
-{
-	return (hpd.pd > 0);
-}
-#endif
-
-#define is_hugepd(hpd)               (hugepd_ok(hpd))
-#define pgd_huge pgd_huge
-int pgd_huge(pgd_t pgd);
-#else /* CONFIG_HUGETLB_PAGE */
-#define is_hugepd(pdep)			0
-#define pgd_huge(pgd)			0
+#ifndef CONFIG_HUGETLB_PAGE
+#define is_hugepd(pdep)		(0)
+#define pgd_huge(pgd)		(0)
 #endif /* CONFIG_HUGETLB_PAGE */
+
 #define __hugepd(x) ((hugepd_t) { (x) })
 
 struct page;
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 37fc53587..54843ca5f 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -205,6 +205,7 @@ struct pci_dn {
 
 	int	pci_ext_config_space;	/* for pci devices */
 
+	struct	pci_dev *pcidev;	/* back-pointer to the pci device */
 #ifdef CONFIG_EEH
 	struct eeh_dev *edev;		/* eeh device */
 #endif
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 3453bd8dc..6f8065a7d 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -149,4 +149,8 @@ extern void pcibios_setup_phb_io_space(struct pci_controller *hose);
 extern void pcibios_scan_phb(struct pci_controller *hose);
 
 #endif	/* __KERNEL__ */
+
+extern struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev);
+extern struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index);
+
 #endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index 842846c1b..76d6b9e0c 100644
--- a/arch/powerpc/include/asm/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -21,16 +21,34 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
 /* #define pgd_populate(mm, pmd, pte)      BUG() */
 
 #ifndef CONFIG_BOOKE
-#define pmd_populate_kernel(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp,
+				       pte_t *pte)
+{
+	*pmdp = __pmd(__pa(pte) | _PMD_PRESENT);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmdp,
+				pgtable_t pte_page)
+{
+	*pmdp = __pmd((page_to_pfn(pte_page) << PAGE_SHIFT) | _PMD_PRESENT);
+}
+
 #define pmd_pgtable(pmd) pmd_page(pmd)
 #else
-#define pmd_populate_kernel(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp,
+				       pte_t *pte)
+{
+	*pmdp = __pmd((unsigned long)pte | _PMD_PRESENT);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmdp,
+				pgtable_t pte_page)
+{
+	*pmdp = __pmd((unsigned long)lowmem_page_address(pte_page) | _PMD_PRESENT);
+}
+
 #define pmd_pgtable(pmd) pmd_page(pmd)
 #endif
 
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index 4b0be20fc..69ef28a81 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -53,7 +53,7 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 
 #ifndef CONFIG_PPC_64K_PAGES
 
-#define pgd_populate(MM, PGD, PUD)	pgd_set(PGD, PUD)
+#define pgd_populate(MM, PGD, PUD)	pgd_set(PGD, (unsigned long)PUD)
 
 static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
@@ -71,9 +71,18 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 	pud_set(pud, (unsigned long)pmd);
 }
 
-#define pmd_populate(mm, pmd, pte_page) \
-	pmd_populate_kernel(mm, pmd, page_address(pte_page))
-#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte))
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+				       pte_t *pte)
+{
+	pmd_set(pmd, (unsigned long)pte);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				pgtable_t pte_page)
+{
+	pmd_set(pmd, (unsigned long)page_address(pte_page));
+}
+
 #define pmd_pgtable(pmd) pmd_page(pmd)
 
 static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
@@ -154,16 +163,6 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
 }
 
 #else /* if CONFIG_PPC_64K_PAGES */
-/*
- * we support 16 fragments per PTE page.
- */
-#define PTE_FRAG_NR	16
-/*
- * We use a 2K PTE page fragment and another 2K for storing
- * real_pte_t hash index
- */
-#define PTE_FRAG_SIZE_SHIFT  12
-#define PTE_FRAG_SIZE (2 * PTRS_PER_PTE * sizeof(pte_t))
 
 extern pte_t *page_table_alloc(struct mm_struct *, unsigned long, int);
 extern void page_table_free(struct mm_struct *, unsigned long *, int);
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index b64b4212b..ac9fb114e 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -1,6 +1,5 @@
 #ifndef _ASM_POWERPC_PGTABLE_H
 #define _ASM_POWERPC_PGTABLE_H
-#ifdef __KERNEL__
 
 #ifndef __ASSEMBLY__
 #include <linux/mmdebug.h>
@@ -13,210 +12,20 @@ struct mm_struct;
 
 #endif /* !__ASSEMBLY__ */
 
-#if defined(CONFIG_PPC64)
-#  include <asm/pgtable-ppc64.h>
+#ifdef CONFIG_PPC_BOOK3S
+#include <asm/book3s/pgtable.h>
 #else
-#  include <asm/pgtable-ppc32.h>
-#endif
-
-/*
- * We save the slot number & secondary bit in the second half of the
- * PTE page. We use the 8 bytes per each pte entry.
- */
-#define PTE_PAGE_HIDX_OFFSET (PTRS_PER_PTE * 8)
+#include <asm/nohash/pgtable.h>
+#endif /* !CONFIG_PPC_BOOK3S */
 
 #ifndef __ASSEMBLY__
 
 #include <asm/tlbflush.h>
 
-/* Generic accessors to PTE bits */
-static inline int pte_write(pte_t pte)
-{	return (pte_val(pte) & (_PAGE_RW | _PAGE_RO)) != _PAGE_RO; }
-static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_special(pte_t pte)	{ return pte_val(pte) & _PAGE_SPECIAL; }
-static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; }
-static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
-
-#ifdef CONFIG_NUMA_BALANCING
-/*
- * These work without NUMA balancing but the kernel does not care. See the
- * comment in include/asm-generic/pgtable.h . On powerpc, this will only
- * work for user pages and always return true for kernel pages.
- */
-static inline int pte_protnone(pte_t pte)
-{
-	return (pte_val(pte) &
-		(_PAGE_PRESENT | _PAGE_USER)) == _PAGE_PRESENT;
-}
-
-static inline int pmd_protnone(pmd_t pmd)
-{
-	return pte_protnone(pmd_pte(pmd));
-}
-#endif /* CONFIG_NUMA_BALANCING */
-
-static inline int pte_present(pte_t pte)
-{
-	return pte_val(pte) & _PAGE_PRESENT;
-}
-
-/* Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * Even if PTEs can be unsigned long long, a PFN is always an unsigned
- * long for now.
- */
-static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) {
-	return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) |
-		     pgprot_val(pgprot)); }
-static inline unsigned long pte_pfn(pte_t pte)	{
-	return pte_val(pte) >> PTE_RPN_SHIFT; }
-
 /* Keep these as a macros to avoid include dependency mess */
 #define pte_page(x)		pfn_to_page(pte_pfn(x))
 #define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
 
-/* Generic modifiers for PTE bits */
-static inline pte_t pte_wrprotect(pte_t pte) {
-	pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE);
-	pte_val(pte) |= _PAGE_RO; return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
-	pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
-	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte) {
-	pte_val(pte) &= ~_PAGE_RO;
-	pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
-	pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
-	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) {
-	pte_val(pte) |= _PAGE_SPECIAL; return pte; }
-static inline pte_t pte_mkhuge(pte_t pte) {
-	return pte; }
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
-	return pte;
-}
-
-
-/* Insert a PTE, top-level function is out of line. It uses an inline
- * low level function in the respective pgtable-* files
- */
-extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
-		       pte_t pte);
-
-/* This low level function performs the actual PTE insertion
- * Setting the PTE depends on the MMU type and other factors. It's
- * an horrible mess that I'm not going to try to clean up now but
- * I'm keeping it in one place rather than spread around
- */
-static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
-				pte_t *ptep, pte_t pte, int percpu)
-{
-#if defined(CONFIG_PPC_STD_MMU_32) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
-	/* First case is 32-bit Hash MMU in SMP mode with 32-bit PTEs. We use the
-	 * helper pte_update() which does an atomic update. We need to do that
-	 * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a
-	 * per-CPU PTE such as a kmap_atomic, we do a simple update preserving
-	 * the hash bits instead (ie, same as the non-SMP case)
-	 */
-	if (percpu)
-		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
-			      | (pte_val(pte) & ~_PAGE_HASHPTE));
-	else
-		pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte));
-
-#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
-	/* Second case is 32-bit with 64-bit PTE.  In this case, we
-	 * can just store as long as we do the two halves in the right order
-	 * with a barrier in between. This is possible because we take care,
-	 * in the hash code, to pre-invalidate if the PTE was already hashed,
-	 * which synchronizes us with any concurrent invalidation.
-	 * In the percpu case, we also fallback to the simple update preserving
-	 * the hash bits
-	 */
-	if (percpu) {
-		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
-			      | (pte_val(pte) & ~_PAGE_HASHPTE));
-		return;
-	}
-#if _PAGE_HASHPTE != 0
-	if (pte_val(*ptep) & _PAGE_HASHPTE)
-		flush_hash_entry(mm, ptep, addr);
-#endif
-	__asm__ __volatile__("\
-		stw%U0%X0 %2,%0\n\
-		eieio\n\
-		stw%U0%X0 %L2,%1"
-	: "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
-	: "r" (pte) : "memory");
-
-#elif defined(CONFIG_PPC_STD_MMU_32)
-	/* Third case is 32-bit hash table in UP mode, we need to preserve
-	 * the _PAGE_HASHPTE bit since we may not have invalidated the previous
-	 * translation in the hash yet (done in a subsequent flush_tlb_xxx())
-	 * and see we need to keep track that this PTE needs invalidating
-	 */
-	*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
-		      | (pte_val(pte) & ~_PAGE_HASHPTE));
-
-#else
-	/* Anything else just stores the PTE normally. That covers all 64-bit
-	 * cases, and 32-bit non-hash with 32-bit PTEs.
-	 */
-	*ptep = pte;
-
-#ifdef CONFIG_PPC_BOOK3E_64
-	/*
-	 * With hardware tablewalk, a sync is needed to ensure that
-	 * subsequent accesses see the PTE we just wrote.  Unlike userspace
-	 * mappings, we can't tolerate spurious faults, so make sure
-	 * the new PTE will be seen the first time.
-	 */
-	if (is_kernel_addr(addr))
-		mb();
-#endif
-#endif
-}
-
-
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
-				 pte_t *ptep, pte_t entry, int dirty);
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-
-#define _PAGE_CACHE_CTL	(_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \
-			 _PAGE_WRITETHRU)
-
-#define pgprot_noncached(prot)	  (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
-				            _PAGE_NO_CACHE | _PAGE_GUARDED))
-
-#define pgprot_noncached_wc(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
-				            _PAGE_NO_CACHE))
-
-#define pgprot_cached(prot)       (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
-				            _PAGE_COHERENT))
-
-#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
-				            _PAGE_COHERENT | _PAGE_WRITETHRU))
-
-#define pgprot_cached_noncoherent(prot) \
-		(__pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL))
-
-#define pgprot_writecombine pgprot_noncached_wc
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-				     unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
@@ -271,5 +80,4 @@ static inline pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
 }
 #endif /* __ASSEMBLY__ */
 
-#endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index 67859edbf..1b394247a 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -202,6 +202,23 @@ static inline long plpar_pte_read_raw(unsigned long flags, unsigned long ptex,
 }
 
 /*
+ * ptes must be 8*sizeof(unsigned long)
+ */
+static inline long plpar_pte_read_4(unsigned long flags, unsigned long ptex,
+				    unsigned long *ptes)
+
+{
+	long rc;
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
+
+	rc = plpar_hcall9(H_READ, retbuf, flags | H_READ_4, ptex);
+
+	memcpy(ptes, retbuf, 8*sizeof(unsigned long));
+
+	return rc;
+}
+
+/*
  * plpar_pte_read_4_raw can be called in real mode.
  * ptes must be 8*sizeof(unsigned long)
  */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index dd0fc18d8..499d9f894 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -413,24 +413,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 	FTR_SECTION_ELSE_NESTED(848);	\
 	mtocrf (FXM), RS;		\
 	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848)
-
-/*
- * PPR restore macros used in entry_64.S
- * Used for P7 or later processors
- */
-#define HMT_MEDIUM_LOW_HAS_PPR						\
-BEGIN_FTR_SECTION_NESTED(944)						\
-	HMT_MEDIUM_LOW;							\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,944)
-
-#define SET_DEFAULT_THREAD_PPR(ra, rb)					\
-BEGIN_FTR_SECTION_NESTED(945)						\
-	lis	ra,INIT_PPR@highest;	/* default ppr=3 */		\
-	ld	rb,PACACURRENT(r13);					\
-	sldi	ra,ra,32;	/* 11- 13 bits are used for ppr */	\
-	std	ra,TASKTHREADPPR(rb);					\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,945)
-
 #endif
 
 /*
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 5afea361b..ac2330820 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -88,12 +88,6 @@ struct task_struct;
 void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
 void release_thread(struct task_struct *);
 
-/* Lazy FPU handling on uni-processor */
-extern struct task_struct *last_task_used_math;
-extern struct task_struct *last_task_used_altivec;
-extern struct task_struct *last_task_used_vsx;
-extern struct task_struct *last_task_used_spe;
-
 #ifdef CONFIG_PPC32
 
 #if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
@@ -294,6 +288,7 @@ struct thread_struct {
 #endif
 #ifdef CONFIG_PPC64
 	unsigned long	dscr;
+	unsigned long	fscr;
 	/*
 	 * This member element dscr_inherit indicates that the process
 	 * has explicitly attempted and changed the DSCR register value
@@ -385,8 +380,6 @@ extern int set_endian(struct task_struct *tsk, unsigned int val);
 extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr);
 extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val);
 
-extern void fp_enable(void);
-extern void vec_enable(void);
 extern void load_fp_state(struct thread_fp_state *fp);
 extern void store_fp_state(struct thread_fp_state *fp);
 extern void load_vr_state(struct thread_vr_state *vr);
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index 71537a319..1ec67b043 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -40,6 +40,11 @@
 #else
 #define _PAGE_RW 0
 #endif
+
+#ifndef _PAGE_PTE
+#define _PAGE_PTE 0
+#endif
+
 #ifndef _PMD_PRESENT_MASK
 #define _PMD_PRESENT_MASK	_PMD_PRESENT
 #endif
diff --git a/arch/powerpc/include/asm/pte-hash64-4k.h b/arch/powerpc/include/asm/pte-hash64-4k.h
deleted file mode 100644
index c134e809a..000000000
--- a/arch/powerpc/include/asm/pte-hash64-4k.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* To be include by pgtable-hash64.h only */
-
-/* PTE bits */
-#define _PAGE_HASHPTE	0x0400 /* software: pte has an associated HPTE */
-#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
-#define _PAGE_GROUP_IX  0x7000 /* software: HPTE index within group */
-#define _PAGE_F_SECOND  _PAGE_SECONDARY
-#define _PAGE_F_GIX     _PAGE_GROUP_IX
-#define _PAGE_SPECIAL	0x10000 /* software: special page */
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
-			 _PAGE_SECONDARY | _PAGE_GROUP_IX)
-
-/* shift to put page number into pte */
-#define PTE_RPN_SHIFT	(17)
-
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
deleted file mode 100644
index 4f4ec2ab4..000000000
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* To be include by pgtable-hash64.h only */
-
-/* Additional PTE bits (don't change without checking asm in hash_low.S) */
-#define _PAGE_SPECIAL	0x00000400 /* software: special page */
-#define _PAGE_HPTE_SUB	0x0ffff000 /* combo only: sub pages HPTE bits */
-#define _PAGE_HPTE_SUB0	0x08000000 /* combo only: first sub page */
-#define _PAGE_COMBO	0x10000000 /* this is a combo 4k page */
-#define _PAGE_4K_PFN	0x20000000 /* PFN is for a single 4k page */
-
-/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
- * we set that to be the whole sub-bits mask. The C code will only
- * test this, so a multi-bit mask will work. For combo pages, this
- * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
- * all the sub bits. For real 64k pages, we now have the assembly set
- * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
- * that mask. This is fine as long as the HIDX bits are never set on
- * a PTE that isn't hashed, which is the case today.
- *
- * A little nit is for the huge page C code, which does the hashing
- * in C, we need to provide which bit to use.
- */
-#define _PAGE_HASHPTE	_PAGE_HPTE_SUB
-
-/* Note the full page bits must be in the same location as for normal
- * 4k pages as the same assembly will be used to insert 64K pages
- * whether the kernel has CONFIG_PPC_64K_PAGES or not
- */
-#define _PAGE_F_SECOND  0x00008000 /* full page: hidx bits */
-#define _PAGE_F_GIX     0x00007000 /* full page: hidx bits */
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
-
-/* Shift to put page number into pte.
- *
- * That gives us a max RPN of 34 bits, which means a max of 50 bits
- * of addressable physical space, or 46 bits for the special 4k PFNs.
- */
-#define PTE_RPN_SHIFT	(30)
-
-#ifndef __ASSEMBLY__
-
-/*
- * With 64K pages on hash table, we have a special PTE format that
- * uses a second "half" of the page table to encode sub-page information
- * in order to deal with 64K made of 4K HW pages. Thus we override the
- * generic accessors and iterators here
- */
-#define __real_pte __real_pte
-static inline real_pte_t __real_pte(pte_t pte, pte_t *ptep)
-{
-	real_pte_t rpte;
-
-	rpte.pte = pte;
-	rpte.hidx = 0;
-	if (pte_val(pte) & _PAGE_COMBO) {
-		/*
-		 * Make sure we order the hidx load against the _PAGE_COMBO
-		 * check. The store side ordering is done in __hash_page_4K
-		 */
-		smp_rmb();
-		rpte.hidx = pte_val(*((ptep) + PTRS_PER_PTE));
-	}
-	return rpte;
-}
-
-static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
-{
-	if ((pte_val(rpte.pte) & _PAGE_COMBO))
-		return (rpte.hidx >> (index<<2)) & 0xf;
-	return (pte_val(rpte.pte) >> 12) & 0xf;
-}
-
-#define __rpte_to_pte(r)	((r).pte)
-#define __rpte_sub_valid(rpte, index) \
-	(pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
-
-/* Trick: we set __end to va + 64k, which happens works for
- * a 16M page as well as we want only one iteration
- */
-#define pte_iterate_hashed_subpages(rpte, psize, vpn, index, shift)	\
-	do {								\
-		unsigned long __end = vpn + (1UL << (PAGE_SHIFT - VPN_SHIFT));	\
-		unsigned __split = (psize == MMU_PAGE_4K ||		\
-				    psize == MMU_PAGE_64K_AP);		\
-		shift = mmu_psize_defs[psize].shift;			\
-		for (index = 0; vpn < __end; index++,			\
-			     vpn += (1L << (shift - VPN_SHIFT))) {	\
-			if (!__split || __rpte_sub_valid(rpte, index))	\
-				do {
-
-#define pte_iterate_hashed_end() } while(0); } } while(0)
-
-#define pte_pagesize_index(mm, addr, pte)	\
-	(((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
-
-#define remap_4k_pfn(vma, addr, pfn, prot)				\
-	(WARN_ON(((pfn) >= (1UL << (64 - PTE_RPN_SHIFT)))) ? -EINVAL :	\
-		remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE,	\
-			__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)))
-
-#endif	/* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/pte-hash64.h b/arch/powerpc/include/asm/pte-hash64.h
deleted file mode 100644
index ef612c160..000000000
--- a/arch/powerpc/include/asm/pte-hash64.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef _ASM_POWERPC_PTE_HASH64_H
-#define _ASM_POWERPC_PTE_HASH64_H
-#ifdef __KERNEL__
-
-/*
- * Common bits between 4K and 64K pages in a linux-style PTE.
- * These match the bits in the (hardware-defined) PowerPC PTE as closely
- * as possible. Additional bits may be defined in pgtable-hash64-*.h
- *
- * Note: We only support user read/write permissions. Supervisor always
- * have full read/write to pages above PAGE_OFFSET (pages below that
- * always use the user access permissions).
- *
- * We could create separate kernel read-only if we used the 3 PP bits
- * combinations that newer processors provide but we currently don't.
- */
-#define _PAGE_PRESENT		0x0001 /* software: pte contains a translation */
-#define _PAGE_USER		0x0002 /* matches one of the PP bits */
-#define _PAGE_BIT_SWAP_TYPE	2
-#define _PAGE_EXEC		0x0004 /* No execute on POWER4 and newer (we invert) */
-#define _PAGE_GUARDED		0x0008
-/* We can derive Memory coherence from _PAGE_NO_CACHE */
-#define _PAGE_NO_CACHE		0x0020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU		0x0040 /* W: cache write-through */
-#define _PAGE_DIRTY		0x0080 /* C: page changed */
-#define _PAGE_ACCESSED		0x0100 /* R: page referenced */
-#define _PAGE_RW		0x0200 /* software: user write access allowed */
-#define _PAGE_BUSY		0x0800 /* software: PTE & hash are busy */
-
-/* No separate kernel read-only */
-#define _PAGE_KERNEL_RW		(_PAGE_RW | _PAGE_DIRTY) /* user access blocked by key */
-#define _PAGE_KERNEL_RO		 _PAGE_KERNEL_RW
-
-/* Strong Access Ordering */
-#define _PAGE_SAO		(_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
-
-/* No page size encoding in the linux PTE */
-#define _PAGE_PSIZE		0
-
-/* PTEIDX nibble */
-#define _PTEIDX_SECONDARY	0x8
-#define _PTEIDX_GROUP_IX	0x7
-
-/* Hash table based platforms need atomic updates of the linux PTE */
-#define PTE_ATOMIC_UPDATES	1
-
-#ifdef CONFIG_PPC_64K_PAGES
-#include <asm/pte-hash64-64k.h>
-#else
-#include <asm/pte-hash64-4k.h>
-#endif
-
-#endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_HASH64_H */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
deleted file mode 100644
index 32b9bfa0c..000000000
--- a/arch/powerpc/include/asm/qe.h
+++ /dev/null
@@ -1,740 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * QUICC Engine (QE) external definitions and structure.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_QE_H
-#define _ASM_POWERPC_QE_H
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <asm/cpm.h>
-#include <asm/immap_qe.h>
-
-#define QE_NUM_OF_SNUM	256	/* There are 256 serial number in QE */
-#define QE_NUM_OF_BRGS	16
-#define QE_NUM_OF_PORTS	1024
-
-/* Memory partitions
-*/
-#define MEM_PART_SYSTEM		0
-#define MEM_PART_SECONDARY	1
-#define MEM_PART_MURAM		2
-
-/* Clocks and BRGs */
-enum qe_clock {
-	QE_CLK_NONE = 0,
-	QE_BRG1,		/* Baud Rate Generator 1 */
-	QE_BRG2,		/* Baud Rate Generator 2 */
-	QE_BRG3,		/* Baud Rate Generator 3 */
-	QE_BRG4,		/* Baud Rate Generator 4 */
-	QE_BRG5,		/* Baud Rate Generator 5 */
-	QE_BRG6,		/* Baud Rate Generator 6 */
-	QE_BRG7,		/* Baud Rate Generator 7 */
-	QE_BRG8,		/* Baud Rate Generator 8 */
-	QE_BRG9,		/* Baud Rate Generator 9 */
-	QE_BRG10,		/* Baud Rate Generator 10 */
-	QE_BRG11,		/* Baud Rate Generator 11 */
-	QE_BRG12,		/* Baud Rate Generator 12 */
-	QE_BRG13,		/* Baud Rate Generator 13 */
-	QE_BRG14,		/* Baud Rate Generator 14 */
-	QE_BRG15,		/* Baud Rate Generator 15 */
-	QE_BRG16,		/* Baud Rate Generator 16 */
-	QE_CLK1,		/* Clock 1 */
-	QE_CLK2,		/* Clock 2 */
-	QE_CLK3,		/* Clock 3 */
-	QE_CLK4,		/* Clock 4 */
-	QE_CLK5,		/* Clock 5 */
-	QE_CLK6,		/* Clock 6 */
-	QE_CLK7,		/* Clock 7 */
-	QE_CLK8,		/* Clock 8 */
-	QE_CLK9,		/* Clock 9 */
-	QE_CLK10,		/* Clock 10 */
-	QE_CLK11,		/* Clock 11 */
-	QE_CLK12,		/* Clock 12 */
-	QE_CLK13,		/* Clock 13 */
-	QE_CLK14,		/* Clock 14 */
-	QE_CLK15,		/* Clock 15 */
-	QE_CLK16,		/* Clock 16 */
-	QE_CLK17,		/* Clock 17 */
-	QE_CLK18,		/* Clock 18 */
-	QE_CLK19,		/* Clock 19 */
-	QE_CLK20,		/* Clock 20 */
-	QE_CLK21,		/* Clock 21 */
-	QE_CLK22,		/* Clock 22 */
-	QE_CLK23,		/* Clock 23 */
-	QE_CLK24,		/* Clock 24 */
-	QE_CLK_DUMMY
-};
-
-static inline bool qe_clock_is_brg(enum qe_clock clk)
-{
-	return clk >= QE_BRG1 && clk <= QE_BRG16;
-}
-
-extern spinlock_t cmxgcr_lock;
-
-/* Export QE common operations */
-#ifdef CONFIG_QUICC_ENGINE
-extern void qe_reset(void);
-#else
-static inline void qe_reset(void) {}
-#endif
-
-/* QE PIO */
-#define QE_PIO_PINS 32
-
-struct qe_pio_regs {
-	__be32	cpodr;		/* Open drain register */
-	__be32	cpdata;		/* Data register */
-	__be32	cpdir1;		/* Direction register */
-	__be32	cpdir2;		/* Direction register */
-	__be32	cppar1;		/* Pin assignment register */
-	__be32	cppar2;		/* Pin assignment register */
-#ifdef CONFIG_PPC_85xx
-	u8	pad[8];
-#endif
-};
-
-#define QE_PIO_DIR_IN	2
-#define QE_PIO_DIR_OUT	1
-extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
-				int dir, int open_drain, int assignment,
-				int has_irq);
-#ifdef CONFIG_QUICC_ENGINE
-extern int par_io_init(struct device_node *np);
-extern int par_io_of_config(struct device_node *np);
-extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-			     int assignment, int has_irq);
-extern int par_io_data_set(u8 port, u8 pin, u8 val);
-#else
-static inline int par_io_init(struct device_node *np) { return -ENOSYS; }
-static inline int par_io_of_config(struct device_node *np) { return -ENOSYS; }
-static inline int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-		int assignment, int has_irq) { return -ENOSYS; }
-static inline int par_io_data_set(u8 port, u8 pin, u8 val) { return -ENOSYS; }
-#endif /* CONFIG_QUICC_ENGINE */
-
-/*
- * Pin multiplexing functions.
- */
-struct qe_pin;
-#ifdef CONFIG_QE_GPIO
-extern struct qe_pin *qe_pin_request(struct device_node *np, int index);
-extern void qe_pin_free(struct qe_pin *qe_pin);
-extern void qe_pin_set_gpio(struct qe_pin *qe_pin);
-extern void qe_pin_set_dedicated(struct qe_pin *pin);
-#else
-static inline struct qe_pin *qe_pin_request(struct device_node *np, int index)
-{
-	return ERR_PTR(-ENOSYS);
-}
-static inline void qe_pin_free(struct qe_pin *qe_pin) {}
-static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {}
-static inline void qe_pin_set_dedicated(struct qe_pin *pin) {}
-#endif /* CONFIG_QE_GPIO */
-
-#ifdef CONFIG_QUICC_ENGINE
-int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
-#else
-static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
-			       u32 cmd_input)
-{
-	return -ENOSYS;
-}
-#endif /* CONFIG_QUICC_ENGINE */
-
-/* QE internal API */
-enum qe_clock qe_clock_source(const char *source);
-unsigned int qe_get_brg_clk(void);
-int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
-int qe_get_snum(void);
-void qe_put_snum(u8 snum);
-unsigned int qe_get_num_of_risc(void);
-unsigned int qe_get_num_of_snums(void);
-
-static inline int qe_alive_during_sleep(void)
-{
-	/*
-	 * MPC8568E reference manual says:
-	 *
-	 * "...power down sequence waits for all I/O interfaces to become idle.
-	 *  In some applications this may happen eventually without actively
-	 *  shutting down interfaces, but most likely, software will have to
-	 *  take steps to shut down the eTSEC, QUICC Engine Block, and PCI
-	 *  interfaces before issuing the command (either the write to the core
-	 *  MSR[WE] as described above or writing to POWMGTCSR) to put the
-	 *  device into sleep state."
-	 *
-	 * MPC8569E reference manual has a similar paragraph.
-	 */
-#ifdef CONFIG_PPC_85xx
-	return 0;
-#else
-	return 1;
-#endif
-}
-
-/* we actually use cpm_muram implementation, define this for convenience */
-#define qe_muram_init cpm_muram_init
-#define qe_muram_alloc cpm_muram_alloc
-#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
-#define qe_muram_free cpm_muram_free
-#define qe_muram_addr cpm_muram_addr
-#define qe_muram_offset cpm_muram_offset
-
-/* Structure that defines QE firmware binary files.
- *
- * See Documentation/powerpc/qe_firmware.txt for a description of these
- * fields.
- */
-struct qe_firmware {
-	struct qe_header {
-		__be32 length;  /* Length of the entire structure, in bytes */
-		u8 magic[3];    /* Set to { 'Q', 'E', 'F' } */
-		u8 version;     /* Version of this layout. First ver is '1' */
-	} header;
-	u8 id[62];      /* Null-terminated identifier string */
-	u8 split;	/* 0 = shared I-RAM, 1 = split I-RAM */
-	u8 count;       /* Number of microcode[] structures */
-	struct {
-		__be16 model;   	/* The SOC model  */
-		u8 major;       	/* The SOC revision major */
-		u8 minor;       	/* The SOC revision minor */
-	} __attribute__ ((packed)) soc;
-	u8 padding[4];			/* Reserved, for alignment */
-	__be64 extended_modes;		/* Extended modes */
-	__be32 vtraps[8];		/* Virtual trap addresses */
-	u8 reserved[4];			/* Reserved, for future expansion */
-	struct qe_microcode {
-		u8 id[32];      	/* Null-terminated identifier */
-		__be32 traps[16];       /* Trap addresses, 0 == ignore */
-		__be32 eccr;    	/* The value for the ECCR register */
-		__be32 iram_offset;     /* Offset into I-RAM for the code */
-		__be32 count;   	/* Number of 32-bit words of the code */
-		__be32 code_offset;     /* Offset of the actual microcode */
-		u8 major;       	/* The microcode version major */
-		u8 minor;       	/* The microcode version minor */
-		u8 revision;		/* The microcode version revision */
-		u8 padding;		/* Reserved, for alignment */
-		u8 reserved[4];		/* Reserved, for future expansion */
-	} __attribute__ ((packed)) microcode[1];
-	/* All microcode binaries should be located here */
-	/* CRC32 should be located here, after the microcode binaries */
-} __attribute__ ((packed));
-
-struct qe_firmware_info {
-	char id[64];		/* Firmware name */
-	u32 vtraps[8];		/* Virtual trap addresses */
-	u64 extended_modes;	/* Extended modes */
-};
-
-#ifdef CONFIG_QUICC_ENGINE
-/* Upload a firmware to the QE */
-int qe_upload_firmware(const struct qe_firmware *firmware);
-#else
-static inline int qe_upload_firmware(const struct qe_firmware *firmware)
-{
-	return -ENOSYS;
-}
-#endif /* CONFIG_QUICC_ENGINE */
-
-/* Obtain information on the uploaded firmware */
-struct qe_firmware_info *qe_get_firmware_info(void);
-
-/* QE USB */
-int qe_usb_clock_set(enum qe_clock clk, int rate);
-
-/* Buffer descriptors */
-struct qe_bd {
-	__be16 status;
-	__be16 length;
-	__be32 buf;
-} __attribute__ ((packed));
-
-#define BD_STATUS_MASK	0xffff0000
-#define BD_LENGTH_MASK	0x0000ffff
-
-/* Alignment */
-#define QE_INTR_TABLE_ALIGN	16	/* ??? */
-#define QE_ALIGNMENT_OF_BD	8
-#define QE_ALIGNMENT_OF_PRAM	64
-
-/* RISC allocation */
-#define QE_RISC_ALLOCATION_RISC1	0x1  /* RISC 1 */
-#define QE_RISC_ALLOCATION_RISC2	0x2  /* RISC 2 */
-#define QE_RISC_ALLOCATION_RISC3	0x4  /* RISC 3 */
-#define QE_RISC_ALLOCATION_RISC4	0x8  /* RISC 4 */
-#define QE_RISC_ALLOCATION_RISC1_AND_RISC2	(QE_RISC_ALLOCATION_RISC1 | \
-						 QE_RISC_ALLOCATION_RISC2)
-#define QE_RISC_ALLOCATION_FOUR_RISCS	(QE_RISC_ALLOCATION_RISC1 | \
-					 QE_RISC_ALLOCATION_RISC2 | \
-					 QE_RISC_ALLOCATION_RISC3 | \
-					 QE_RISC_ALLOCATION_RISC4)
-
-/* QE extended filtering Table Lookup Key Size */
-enum qe_fltr_tbl_lookup_key_size {
-	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
-		= 0x3f,		/* LookupKey parsed by the Generate LookupKey
-				   CMD is truncated to 8 bytes */
-	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
-		= 0x5f,		/* LookupKey parsed by the Generate LookupKey
-				   CMD is truncated to 16 bytes */
-};
-
-/* QE FLTR extended filtering Largest External Table Lookup Key Size */
-enum qe_fltr_largest_external_tbl_lookup_key_size {
-	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
-		= 0x0,/* not used */
-	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
-		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES,	/* 8 bytes */
-	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
-		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES,	/* 16 bytes */
-};
-
-/* structure representing QE parameter RAM */
-struct qe_timer_tables {
-	u16 tm_base;		/* QE timer table base adr */
-	u16 tm_ptr;		/* QE timer table pointer */
-	u16 r_tmr;		/* QE timer mode register */
-	u16 r_tmv;		/* QE timer valid register */
-	u32 tm_cmd;		/* QE timer cmd register */
-	u32 tm_cnt;		/* QE timer internal cnt */
-} __attribute__ ((packed));
-
-#define QE_FLTR_TAD_SIZE	8
-
-/* QE extended filtering Termination Action Descriptor (TAD) */
-struct qe_fltr_tad {
-	u8 serialized[QE_FLTR_TAD_SIZE];
-} __attribute__ ((packed));
-
-/* Communication Direction */
-enum comm_dir {
-	COMM_DIR_NONE = 0,
-	COMM_DIR_RX = 1,
-	COMM_DIR_TX = 2,
-	COMM_DIR_RX_AND_TX = 3
-};
-
-/* QE CMXUCR Registers.
- * There are two UCCs represented in each of the four CMXUCR registers.
- * These values are for the UCC in the LSBs
- */
-#define QE_CMXUCR_MII_ENET_MNG		0x00007000
-#define QE_CMXUCR_MII_ENET_MNG_SHIFT	12
-#define QE_CMXUCR_GRANT			0x00008000
-#define QE_CMXUCR_TSA			0x00004000
-#define QE_CMXUCR_BKPT			0x00000100
-#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F
-
-/* QE CMXGCR Registers.
-*/
-#define QE_CMXGCR_MII_ENET_MNG		0x00007000
-#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12
-#define QE_CMXGCR_USBCS			0x0000000f
-#define QE_CMXGCR_USBCS_CLK3		0x1
-#define QE_CMXGCR_USBCS_CLK5		0x2
-#define QE_CMXGCR_USBCS_CLK7		0x3
-#define QE_CMXGCR_USBCS_CLK9		0x4
-#define QE_CMXGCR_USBCS_CLK13		0x5
-#define QE_CMXGCR_USBCS_CLK17		0x6
-#define QE_CMXGCR_USBCS_CLK19		0x7
-#define QE_CMXGCR_USBCS_CLK21		0x8
-#define QE_CMXGCR_USBCS_BRG9		0x9
-#define QE_CMXGCR_USBCS_BRG10		0xa
-
-/* QE CECR Commands.
-*/
-#define QE_CR_FLG			0x00010000
-#define QE_RESET			0x80000000
-#define QE_INIT_TX_RX			0x00000000
-#define QE_INIT_RX			0x00000001
-#define QE_INIT_TX			0x00000002
-#define QE_ENTER_HUNT_MODE		0x00000003
-#define QE_STOP_TX			0x00000004
-#define QE_GRACEFUL_STOP_TX		0x00000005
-#define QE_RESTART_TX			0x00000006
-#define QE_CLOSE_RX_BD			0x00000007
-#define QE_SWITCH_COMMAND		0x00000007
-#define QE_SET_GROUP_ADDRESS		0x00000008
-#define QE_START_IDMA			0x00000009
-#define QE_MCC_STOP_RX			0x00000009
-#define QE_ATM_TRANSMIT			0x0000000a
-#define QE_HPAC_CLEAR_ALL		0x0000000b
-#define QE_GRACEFUL_STOP_RX		0x0000001a
-#define QE_RESTART_RX			0x0000001b
-#define QE_HPAC_SET_PRIORITY		0x0000010b
-#define QE_HPAC_STOP_TX			0x0000020b
-#define QE_HPAC_STOP_RX			0x0000030b
-#define QE_HPAC_GRACEFUL_STOP_TX	0x0000040b
-#define QE_HPAC_GRACEFUL_STOP_RX	0x0000050b
-#define QE_HPAC_START_TX		0x0000060b
-#define QE_HPAC_START_RX		0x0000070b
-#define QE_USB_STOP_TX			0x0000000a
-#define QE_USB_RESTART_TX		0x0000000c
-#define QE_QMC_STOP_TX			0x0000000c
-#define QE_QMC_STOP_RX			0x0000000d
-#define QE_SS7_SU_FIL_RESET		0x0000000e
-/* jonathbr added from here down for 83xx */
-#define QE_RESET_BCS			0x0000000a
-#define QE_MCC_INIT_TX_RX_16		0x00000003
-#define QE_MCC_STOP_TX			0x00000004
-#define QE_MCC_INIT_TX_1		0x00000005
-#define QE_MCC_INIT_RX_1		0x00000006
-#define QE_MCC_RESET			0x00000007
-#define QE_SET_TIMER			0x00000008
-#define QE_RANDOM_NUMBER		0x0000000c
-#define QE_ATM_MULTI_THREAD_INIT	0x00000011
-#define QE_ASSIGN_PAGE			0x00000012
-#define QE_ADD_REMOVE_HASH_ENTRY	0x00000013
-#define QE_START_FLOW_CONTROL		0x00000014
-#define QE_STOP_FLOW_CONTROL		0x00000015
-#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
-
-#define QE_ASSIGN_RISC			0x00000010
-#define QE_CR_MCN_NORMAL_SHIFT		6
-#define QE_CR_MCN_USB_SHIFT		4
-#define QE_CR_MCN_RISC_ASSIGN_SHIFT	8
-#define QE_CR_SNUM_SHIFT		17
-
-/* QE CECR Sub Block - sub block of QE command.
-*/
-#define QE_CR_SUBBLOCK_INVALID		0x00000000
-#define QE_CR_SUBBLOCK_USB		0x03200000
-#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
-#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
-#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
-#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
-#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
-#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
-#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
-#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
-#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
-#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
-#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
-#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
-#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
-#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
-#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
-#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
-#define QE_CR_SUBBLOCK_MCC1		0x03800000
-#define QE_CR_SUBBLOCK_MCC2		0x03a00000
-#define QE_CR_SUBBLOCK_MCC3		0x03000000
-#define QE_CR_SUBBLOCK_IDMA1		0x02800000
-#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
-#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
-#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
-#define QE_CR_SUBBLOCK_HPAC		0x01e00000
-#define QE_CR_SUBBLOCK_SPI1		0x01400000
-#define QE_CR_SUBBLOCK_SPI2		0x01600000
-#define QE_CR_SUBBLOCK_RAND		0x01c00000
-#define QE_CR_SUBBLOCK_TIMER		0x01e00000
-#define QE_CR_SUBBLOCK_GENERAL		0x03c00000
-
-/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
-#define QE_CR_PROTOCOL_UNSPECIFIED	0x00	/* For all other protocols */
-#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
-#define QE_CR_PROTOCOL_QMC		0x02
-#define QE_CR_PROTOCOL_UART		0x04
-#define QE_CR_PROTOCOL_ATM_POS		0x0A
-#define QE_CR_PROTOCOL_ETHERNET		0x0C
-#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
-
-/* BRG configuration register */
-#define QE_BRGC_ENABLE		0x00010000
-#define QE_BRGC_DIVISOR_SHIFT	1
-#define QE_BRGC_DIVISOR_MAX	0xFFF
-#define QE_BRGC_DIV16		1
-
-/* QE Timers registers */
-#define QE_GTCFR1_PCAS	0x80
-#define QE_GTCFR1_STP2	0x20
-#define QE_GTCFR1_RST2	0x10
-#define QE_GTCFR1_GM2	0x08
-#define QE_GTCFR1_GM1	0x04
-#define QE_GTCFR1_STP1	0x02
-#define QE_GTCFR1_RST1	0x01
-
-/* SDMA registers */
-#define QE_SDSR_BER1	0x02000000
-#define QE_SDSR_BER2	0x01000000
-
-#define QE_SDMR_GLB_1_MSK	0x80000000
-#define QE_SDMR_ADR_SEL		0x20000000
-#define QE_SDMR_BER1_MSK	0x02000000
-#define QE_SDMR_BER2_MSK	0x01000000
-#define QE_SDMR_EB1_MSK		0x00800000
-#define QE_SDMR_ER1_MSK		0x00080000
-#define QE_SDMR_ER2_MSK		0x00040000
-#define QE_SDMR_CEN_MASK	0x0000E000
-#define QE_SDMR_SBER_1		0x00000200
-#define QE_SDMR_SBER_2		0x00000200
-#define QE_SDMR_EB1_PR_MASK	0x000000C0
-#define QE_SDMR_ER1_PR		0x00000008
-
-#define QE_SDMR_CEN_SHIFT	13
-#define QE_SDMR_EB1_PR_SHIFT	6
-
-#define QE_SDTM_MSNUM_SHIFT	24
-
-#define QE_SDEBCR_BA_MASK	0x01FFFFFF
-
-/* Communication Processor */
-#define QE_CP_CERCR_MEE		0x8000	/* Multi-user RAM ECC enable */
-#define QE_CP_CERCR_IEE		0x4000	/* Instruction RAM ECC enable */
-#define QE_CP_CERCR_CIR		0x0800	/* Common instruction RAM */
-
-/* I-RAM */
-#define QE_IRAM_IADD_AIE	0x80000000	/* Auto Increment Enable */
-#define QE_IRAM_IADD_BADDR	0x00080000	/* Base Address */
-#define QE_IRAM_READY           0x80000000      /* Ready */
-
-/* UPC */
-#define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */
-#define UPGCR_TMS	0x40000000	/* Transmit master/slave mode */
-#define UPGCR_RMS	0x20000000	/* Receive master/slave mode */
-#define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing */
-#define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
-
-/* UCC GUEMR register */
-#define UCC_GUEMR_MODE_MASK_RX	0x02
-#define UCC_GUEMR_MODE_FAST_RX	0x02
-#define UCC_GUEMR_MODE_SLOW_RX	0x00
-#define UCC_GUEMR_MODE_MASK_TX	0x01
-#define UCC_GUEMR_MODE_FAST_TX	0x01
-#define UCC_GUEMR_MODE_SLOW_TX	0x00
-#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
-#define UCC_GUEMR_SET_RESERVED3	0x10	/* Bit 3 in the guemr is reserved but
-					   must be set 1 */
-
-/* structure representing UCC SLOW parameter RAM */
-struct ucc_slow_pram {
-	__be16 rbase;		/* RX BD base address */
-	__be16 tbase;		/* TX BD base address */
-	u8 rbmr;		/* RX bus mode register (same as CPM's RFCR) */
-	u8 tbmr;		/* TX bus mode register (same as CPM's TFCR) */
-	__be16 mrblr;		/* Rx buffer length */
-	__be32 rstate;		/* Rx internal state */
-	__be32 rptr;		/* Rx internal data pointer */
-	__be16 rbptr;		/* rb BD Pointer */
-	__be16 rcount;		/* Rx internal byte count */
-	__be32 rtemp;		/* Rx temp */
-	__be32 tstate;		/* Tx internal state */
-	__be32 tptr;		/* Tx internal data pointer */
-	__be16 tbptr;		/* Tx BD pointer */
-	__be16 tcount;		/* Tx byte count */
-	__be32 ttemp;		/* Tx temp */
-	__be32 rcrc;		/* temp receive CRC */
-	__be32 tcrc;		/* temp transmit CRC */
-} __attribute__ ((packed));
-
-/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
-#define UCC_SLOW_GUMR_H_SAM_QMC		0x00000000
-#define UCC_SLOW_GUMR_H_SAM_SATM	0x00008000
-#define UCC_SLOW_GUMR_H_REVD		0x00002000
-#define UCC_SLOW_GUMR_H_TRX		0x00001000
-#define UCC_SLOW_GUMR_H_TTX		0x00000800
-#define UCC_SLOW_GUMR_H_CDP		0x00000400
-#define UCC_SLOW_GUMR_H_CTSP		0x00000200
-#define UCC_SLOW_GUMR_H_CDS		0x00000100
-#define UCC_SLOW_GUMR_H_CTSS		0x00000080
-#define UCC_SLOW_GUMR_H_TFL		0x00000040
-#define UCC_SLOW_GUMR_H_RFW		0x00000020
-#define UCC_SLOW_GUMR_H_TXSY		0x00000010
-#define UCC_SLOW_GUMR_H_4SYNC		0x00000004
-#define UCC_SLOW_GUMR_H_8SYNC		0x00000008
-#define UCC_SLOW_GUMR_H_16SYNC		0x0000000c
-#define UCC_SLOW_GUMR_H_RTSM		0x00000002
-#define UCC_SLOW_GUMR_H_RSYN		0x00000001
-
-#define UCC_SLOW_GUMR_L_TCI		0x10000000
-#define UCC_SLOW_GUMR_L_RINV		0x02000000
-#define UCC_SLOW_GUMR_L_TINV		0x01000000
-#define UCC_SLOW_GUMR_L_TEND		0x00040000
-#define UCC_SLOW_GUMR_L_TDCR_MASK	0x00030000
-#define UCC_SLOW_GUMR_L_TDCR_32	        0x00030000
-#define UCC_SLOW_GUMR_L_TDCR_16	        0x00020000
-#define UCC_SLOW_GUMR_L_TDCR_8	        0x00010000
-#define UCC_SLOW_GUMR_L_TDCR_1	        0x00000000
-#define UCC_SLOW_GUMR_L_RDCR_MASK	0x0000c000
-#define UCC_SLOW_GUMR_L_RDCR_32		0x0000c000
-#define UCC_SLOW_GUMR_L_RDCR_16	        0x00008000
-#define UCC_SLOW_GUMR_L_RDCR_8	        0x00004000
-#define UCC_SLOW_GUMR_L_RDCR_1		0x00000000
-#define UCC_SLOW_GUMR_L_RENC_NRZI	0x00000800
-#define UCC_SLOW_GUMR_L_RENC_NRZ	0x00000000
-#define UCC_SLOW_GUMR_L_TENC_NRZI	0x00000100
-#define UCC_SLOW_GUMR_L_TENC_NRZ	0x00000000
-#define UCC_SLOW_GUMR_L_DIAG_MASK	0x000000c0
-#define UCC_SLOW_GUMR_L_DIAG_LE	        0x000000c0
-#define UCC_SLOW_GUMR_L_DIAG_ECHO	0x00000080
-#define UCC_SLOW_GUMR_L_DIAG_LOOP	0x00000040
-#define UCC_SLOW_GUMR_L_DIAG_NORM	0x00000000
-#define UCC_SLOW_GUMR_L_ENR		0x00000020
-#define UCC_SLOW_GUMR_L_ENT		0x00000010
-#define UCC_SLOW_GUMR_L_MODE_MASK	0x0000000F
-#define UCC_SLOW_GUMR_L_MODE_BISYNC	0x00000008
-#define UCC_SLOW_GUMR_L_MODE_AHDLC	0x00000006
-#define UCC_SLOW_GUMR_L_MODE_UART	0x00000004
-#define UCC_SLOW_GUMR_L_MODE_QMC	0x00000002
-
-/* General UCC FAST Mode Register */
-#define UCC_FAST_GUMR_TCI	0x20000000
-#define UCC_FAST_GUMR_TRX	0x10000000
-#define UCC_FAST_GUMR_TTX	0x08000000
-#define UCC_FAST_GUMR_CDP	0x04000000
-#define UCC_FAST_GUMR_CTSP	0x02000000
-#define UCC_FAST_GUMR_CDS	0x01000000
-#define UCC_FAST_GUMR_CTSS	0x00800000
-#define UCC_FAST_GUMR_TXSY	0x00020000
-#define UCC_FAST_GUMR_RSYN	0x00010000
-#define UCC_FAST_GUMR_RTSM	0x00002000
-#define UCC_FAST_GUMR_REVD	0x00000400
-#define UCC_FAST_GUMR_ENR	0x00000020
-#define UCC_FAST_GUMR_ENT	0x00000010
-
-/* UART Slow UCC Event Register (UCCE) */
-#define UCC_UART_UCCE_AB	0x0200
-#define UCC_UART_UCCE_IDLE	0x0100
-#define UCC_UART_UCCE_GRA	0x0080
-#define UCC_UART_UCCE_BRKE	0x0040
-#define UCC_UART_UCCE_BRKS	0x0020
-#define UCC_UART_UCCE_CCR	0x0008
-#define UCC_UART_UCCE_BSY	0x0004
-#define UCC_UART_UCCE_TX	0x0002
-#define UCC_UART_UCCE_RX	0x0001
-
-/* HDLC Slow UCC Event Register (UCCE) */
-#define UCC_HDLC_UCCE_GLR	0x1000
-#define UCC_HDLC_UCCE_GLT	0x0800
-#define UCC_HDLC_UCCE_IDLE	0x0100
-#define UCC_HDLC_UCCE_BRKE	0x0040
-#define UCC_HDLC_UCCE_BRKS	0x0020
-#define UCC_HDLC_UCCE_TXE	0x0010
-#define UCC_HDLC_UCCE_RXF	0x0008
-#define UCC_HDLC_UCCE_BSY	0x0004
-#define UCC_HDLC_UCCE_TXB	0x0002
-#define UCC_HDLC_UCCE_RXB	0x0001
-
-/* BISYNC Slow UCC Event Register (UCCE) */
-#define UCC_BISYNC_UCCE_GRA	0x0080
-#define UCC_BISYNC_UCCE_TXE	0x0010
-#define UCC_BISYNC_UCCE_RCH	0x0008
-#define UCC_BISYNC_UCCE_BSY	0x0004
-#define UCC_BISYNC_UCCE_TXB	0x0002
-#define UCC_BISYNC_UCCE_RXB	0x0001
-
-/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
-#define UCC_GETH_UCCE_MPD       0x80000000
-#define UCC_GETH_UCCE_SCAR      0x40000000
-#define UCC_GETH_UCCE_GRA       0x20000000
-#define UCC_GETH_UCCE_CBPR      0x10000000
-#define UCC_GETH_UCCE_BSY       0x08000000
-#define UCC_GETH_UCCE_RXC       0x04000000
-#define UCC_GETH_UCCE_TXC       0x02000000
-#define UCC_GETH_UCCE_TXE       0x01000000
-#define UCC_GETH_UCCE_TXB7      0x00800000
-#define UCC_GETH_UCCE_TXB6      0x00400000
-#define UCC_GETH_UCCE_TXB5      0x00200000
-#define UCC_GETH_UCCE_TXB4      0x00100000
-#define UCC_GETH_UCCE_TXB3      0x00080000
-#define UCC_GETH_UCCE_TXB2      0x00040000
-#define UCC_GETH_UCCE_TXB1      0x00020000
-#define UCC_GETH_UCCE_TXB0      0x00010000
-#define UCC_GETH_UCCE_RXB7      0x00008000
-#define UCC_GETH_UCCE_RXB6      0x00004000
-#define UCC_GETH_UCCE_RXB5      0x00002000
-#define UCC_GETH_UCCE_RXB4      0x00001000
-#define UCC_GETH_UCCE_RXB3      0x00000800
-#define UCC_GETH_UCCE_RXB2      0x00000400
-#define UCC_GETH_UCCE_RXB1      0x00000200
-#define UCC_GETH_UCCE_RXB0      0x00000100
-#define UCC_GETH_UCCE_RXF7      0x00000080
-#define UCC_GETH_UCCE_RXF6      0x00000040
-#define UCC_GETH_UCCE_RXF5      0x00000020
-#define UCC_GETH_UCCE_RXF4      0x00000010
-#define UCC_GETH_UCCE_RXF3      0x00000008
-#define UCC_GETH_UCCE_RXF2      0x00000004
-#define UCC_GETH_UCCE_RXF1      0x00000002
-#define UCC_GETH_UCCE_RXF0      0x00000001
-
-/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
-#define UCC_UART_UPSMR_FLC		0x8000
-#define UCC_UART_UPSMR_SL		0x4000
-#define UCC_UART_UPSMR_CL_MASK		0x3000
-#define UCC_UART_UPSMR_CL_8		0x3000
-#define UCC_UART_UPSMR_CL_7		0x2000
-#define UCC_UART_UPSMR_CL_6		0x1000
-#define UCC_UART_UPSMR_CL_5		0x0000
-#define UCC_UART_UPSMR_UM_MASK		0x0c00
-#define UCC_UART_UPSMR_UM_NORMAL	0x0000
-#define UCC_UART_UPSMR_UM_MAN_MULTI	0x0400
-#define UCC_UART_UPSMR_UM_AUTO_MULTI	0x0c00
-#define UCC_UART_UPSMR_FRZ		0x0200
-#define UCC_UART_UPSMR_RZS		0x0100
-#define UCC_UART_UPSMR_SYN		0x0080
-#define UCC_UART_UPSMR_DRT		0x0040
-#define UCC_UART_UPSMR_PEN		0x0010
-#define UCC_UART_UPSMR_RPM_MASK		0x000c
-#define UCC_UART_UPSMR_RPM_ODD		0x0000
-#define UCC_UART_UPSMR_RPM_LOW		0x0004
-#define UCC_UART_UPSMR_RPM_EVEN		0x0008
-#define UCC_UART_UPSMR_RPM_HIGH		0x000C
-#define UCC_UART_UPSMR_TPM_MASK		0x0003
-#define UCC_UART_UPSMR_TPM_ODD		0x0000
-#define UCC_UART_UPSMR_TPM_LOW		0x0001
-#define UCC_UART_UPSMR_TPM_EVEN		0x0002
-#define UCC_UART_UPSMR_TPM_HIGH		0x0003
-
-/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
-#define UCC_GETH_UPSMR_FTFE     0x80000000
-#define UCC_GETH_UPSMR_PTPE     0x40000000
-#define UCC_GETH_UPSMR_ECM      0x04000000
-#define UCC_GETH_UPSMR_HSE      0x02000000
-#define UCC_GETH_UPSMR_PRO      0x00400000
-#define UCC_GETH_UPSMR_CAP      0x00200000
-#define UCC_GETH_UPSMR_RSH      0x00100000
-#define UCC_GETH_UPSMR_RPM      0x00080000
-#define UCC_GETH_UPSMR_R10M     0x00040000
-#define UCC_GETH_UPSMR_RLPB     0x00020000
-#define UCC_GETH_UPSMR_TBIM     0x00010000
-#define UCC_GETH_UPSMR_RES1     0x00002000
-#define UCC_GETH_UPSMR_RMM      0x00001000
-#define UCC_GETH_UPSMR_CAM      0x00000400
-#define UCC_GETH_UPSMR_BRO      0x00000200
-#define UCC_GETH_UPSMR_SMM	0x00000080
-#define UCC_GETH_UPSMR_SGMM	0x00000020
-
-/* UCC Transmit On Demand Register (UTODR) */
-#define UCC_SLOW_TOD	0x8000
-#define UCC_FAST_TOD	0x8000
-
-/* UCC Bus Mode Register masks */
-/* Not to be confused with the Bundle Mode Register */
-#define UCC_BMR_GBL		0x20
-#define UCC_BMR_BO_BE		0x10
-#define UCC_BMR_CETM		0x04
-#define UCC_BMR_DTB		0x02
-#define UCC_BMR_BDB		0x01
-
-/* Function code masks */
-#define FC_GBL				0x20
-#define FC_DTB_LCL			0x02
-#define UCC_FAST_FUNCTION_CODE_GBL	0x20
-#define UCC_FAST_FUNCTION_CODE_DTB_LCL	0x02
-#define UCC_FAST_FUNCTION_CODE_BDB_LCL	0x01
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_QE_H */
diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
deleted file mode 100644
index 1e155ca6d..000000000
--- a/arch/powerpc/include/asm/qe_ic.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE IC external definitions and structure.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_QE_IC_H
-#define _ASM_POWERPC_QE_IC_H
-
-#include <linux/irq.h>
-
-struct device_node;
-struct qe_ic;
-
-#define NUM_OF_QE_IC_GROUPS	6
-
-/* Flags when we init the QE IC */
-#define QE_IC_SPREADMODE_GRP_W			0x00000001
-#define QE_IC_SPREADMODE_GRP_X			0x00000002
-#define QE_IC_SPREADMODE_GRP_Y			0x00000004
-#define QE_IC_SPREADMODE_GRP_Z			0x00000008
-#define QE_IC_SPREADMODE_GRP_RISCA		0x00000010
-#define QE_IC_SPREADMODE_GRP_RISCB		0x00000020
-
-#define QE_IC_LOW_SIGNAL			0x00000100
-#define QE_IC_HIGH_SIGNAL			0x00000200
-
-#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH	0x00001000
-#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH	0x00002000
-#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH	0x00004000
-#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH	0x00008000
-#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH	0x00010000
-#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH	0x00020000
-#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH	0x00040000
-#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH	0x00080000
-#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH	0x00100000
-#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH	0x00200000
-#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH	0x00400000
-#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH	0x00800000
-#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT		(12)
-
-/* QE interrupt sources groups */
-enum qe_ic_grp_id {
-	QE_IC_GRP_W = 0,	/* QE interrupt controller group W */
-	QE_IC_GRP_X,		/* QE interrupt controller group X */
-	QE_IC_GRP_Y,		/* QE interrupt controller group Y */
-	QE_IC_GRP_Z,		/* QE interrupt controller group Z */
-	QE_IC_GRP_RISCA,	/* QE interrupt controller RISC group A */
-	QE_IC_GRP_RISCB		/* QE interrupt controller RISC group B */
-};
-
-#ifdef CONFIG_QUICC_ENGINE
-void qe_ic_init(struct device_node *node, unsigned int flags,
-		void (*low_handler)(struct irq_desc *desc),
-		void (*high_handler)(struct irq_desc *desc));
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
-#else
-static inline void qe_ic_init(struct device_node *node, unsigned int flags,
-		void (*low_handler)(struct irq_desc *desc),
-		void (*high_handler)(struct irq_desc *desc))
-{}
-static inline unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
-{ return 0; }
-static inline unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-{ return 0; }
-#endif /* CONFIG_QUICC_ENGINE */
-
-void qe_ic_set_highest_priority(unsigned int virq, int high);
-int qe_ic_set_priority(unsigned int virq, unsigned int priority);
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
-
-static inline void qe_ic_cascade_low_ipic(struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_high_ipic(struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_low_mpic(struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
-static inline void qe_ic_cascade_high_mpic(struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
-static inline void qe_ic_cascade_muxed_mpic(struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq;
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-
-	cascade_irq = qe_ic_get_high_irq(qe_ic);
-	if (cascade_irq == NO_IRQ)
-		cascade_irq = qe_ic_get_low_irq(qe_ic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 2220f7a60..c4cb2ffc6 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1194,12 +1194,20 @@
 #define __mtmsrd(v, l)	asm volatile("mtmsrd %0," __stringify(l) \
 				     : : "r" (v) : "memory")
 #define mtmsr(v)	__mtmsrd((v), 0)
+#define __MTMSR		"mtmsrd"
 #else
 #define mtmsr(v)	asm volatile("mtmsr %0" : \
 				     : "r" ((unsigned long)(v)) \
 				     : "memory")
+#define __MTMSR		"mtmsr"
 #endif
 
+static inline void mtmsr_isync(unsigned long val)
+{
+	asm volatile(__MTMSR " %0; " ASM_FTR_IFCLR("isync", "nop", %1) : :
+			"r" (val), "i" (CPU_FTR_ARCH_206) : "memory");
+}
+
 #define mfspr(rn)	({unsigned long rval; \
 			asm volatile("mfspr %0," __stringify(rn) \
 				: "=r" (rval)); rval;})
@@ -1207,6 +1215,15 @@
 				     : "r" ((unsigned long)(v)) \
 				     : "memory")
 
+extern void msr_check_and_set(unsigned long bits);
+extern bool strict_msr_control;
+extern void __msr_check_and_clear(unsigned long bits);
+static inline void msr_check_and_clear(unsigned long bits)
+{
+	if (strict_msr_control)
+		__msr_check_and_clear(bits);
+}
+
 static inline unsigned long mfvtb (void)
 {
 #ifdef CONFIG_PPC_BOOK3S_64
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index b77ef369c..51400baa8 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -334,10 +334,11 @@ extern void (*rtas_flash_term_hook)(int);
 
 extern struct rtas_t rtas;
 
-extern void enter_rtas(unsigned long);
 extern int rtas_token(const char *service);
 extern int rtas_service_present(const char *service);
 extern int rtas_call(int token, int, int, int *, ...);
+void rtas_call_unlocked(struct rtas_args *args, int token, int nargs,
+			int nret, ...);
 extern void rtas_restart(char *cmd);
 extern void rtas_power_off(void);
 extern void rtas_halt(void);
diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index 15cca17cb..5b268b6be 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -4,6 +4,8 @@
 #ifndef _ASM_POWERPC_SWITCH_TO_H
 #define _ASM_POWERPC_SWITCH_TO_H
 
+#include <asm/reg.h>
+
 struct thread_struct;
 struct task_struct;
 struct pt_regs;
@@ -12,74 +14,59 @@ extern struct task_struct *__switch_to(struct task_struct *,
 	struct task_struct *);
 #define switch_to(prev, next, last)	((last) = __switch_to((prev), (next)))
 
-struct thread_struct;
 extern struct task_struct *_switch(struct thread_struct *prev,
 				   struct thread_struct *next);
-#ifdef CONFIG_PPC_BOOK3S_64
-static inline void save_early_sprs(struct thread_struct *prev)
-{
-	if (cpu_has_feature(CPU_FTR_ARCH_207S))
-		prev->tar = mfspr(SPRN_TAR);
-	if (cpu_has_feature(CPU_FTR_DSCR))
-		prev->dscr = mfspr(SPRN_DSCR);
-}
-#else
-static inline void save_early_sprs(struct thread_struct *prev) {}
-#endif
 
-extern void enable_kernel_fp(void);
-extern void enable_kernel_altivec(void);
-extern void enable_kernel_vsx(void);
-extern int emulate_altivec(struct pt_regs *);
-extern void __giveup_vsx(struct task_struct *);
-extern void giveup_vsx(struct task_struct *);
-extern void enable_kernel_spe(void);
-extern void giveup_spe(struct task_struct *);
-extern void load_up_spe(struct task_struct *);
 extern void switch_booke_debug_regs(struct debug_reg *new_debug);
 
-#ifndef CONFIG_SMP
-extern void discard_lazy_cpu_state(void);
-#else
-static inline void discard_lazy_cpu_state(void)
-{
-}
-#endif
+extern int emulate_altivec(struct pt_regs *);
+
+extern void flush_all_to_thread(struct task_struct *);
+extern void giveup_all(struct task_struct *);
 
 #ifdef CONFIG_PPC_FPU
+extern void enable_kernel_fp(void);
 extern void flush_fp_to_thread(struct task_struct *);
 extern void giveup_fpu(struct task_struct *);
+extern void __giveup_fpu(struct task_struct *);
+static inline void disable_kernel_fp(void)
+{
+	msr_check_and_clear(MSR_FP);
+}
 #else
 static inline void flush_fp_to_thread(struct task_struct *t) { }
-static inline void giveup_fpu(struct task_struct *t) { }
 #endif
 
 #ifdef CONFIG_ALTIVEC
+extern void enable_kernel_altivec(void);
 extern void flush_altivec_to_thread(struct task_struct *);
 extern void giveup_altivec(struct task_struct *);
-extern void giveup_altivec_notask(void);
-#else
-static inline void flush_altivec_to_thread(struct task_struct *t)
-{
-}
-static inline void giveup_altivec(struct task_struct *t)
+extern void __giveup_altivec(struct task_struct *);
+static inline void disable_kernel_altivec(void)
 {
+	msr_check_and_clear(MSR_VEC);
 }
 #endif
 
 #ifdef CONFIG_VSX
+extern void enable_kernel_vsx(void);
 extern void flush_vsx_to_thread(struct task_struct *);
-#else
-static inline void flush_vsx_to_thread(struct task_struct *t)
+extern void giveup_vsx(struct task_struct *);
+extern void __giveup_vsx(struct task_struct *);
+static inline void disable_kernel_vsx(void)
 {
+	msr_check_and_clear(MSR_FP|MSR_VEC|MSR_VSX);
 }
 #endif
 
 #ifdef CONFIG_SPE
+extern void enable_kernel_spe(void);
 extern void flush_spe_to_thread(struct task_struct *);
-#else
-static inline void flush_spe_to_thread(struct task_struct *t)
+extern void giveup_spe(struct task_struct *);
+extern void __giveup_spe(struct task_struct *);
+static inline void disable_kernel_spe(void)
 {
+	msr_check_and_clear(MSR_SPE);
 }
 #endif
 
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 5654ece02..3fa9df70a 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -383,3 +383,4 @@ SYSCALL(ni_syscall)
 SYSCALL(ni_syscall)
 SYSCALL(ni_syscall)
 SYSCALL(mlock2)
+SYSCALL(copy_file_range)
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index 10fc784a2..2d7109a8d 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -27,7 +27,6 @@ extern struct clock_event_device decrementer_clockevent;
 
 struct rtc_time;
 extern void to_tm(int tim, struct rtc_time * tm);
-extern void GregorianDay(struct rtc_time *tm);
 extern void tick_broadcast_ipi_handler(void);
 
 extern void generic_calibrate_decr(void);
diff --git a/arch/powerpc/include/asm/trace.h b/arch/powerpc/include/asm/trace.h
index 8e86b48d0..32e36b167 100644
--- a/arch/powerpc/include/asm/trace.h
+++ b/arch/powerpc/include/asm/trace.h
@@ -57,12 +57,14 @@ DEFINE_EVENT(ppc64_interrupt_class, timer_interrupt_exit,
 extern void hcall_tracepoint_regfunc(void);
 extern void hcall_tracepoint_unregfunc(void);
 
-TRACE_EVENT_FN(hcall_entry,
+TRACE_EVENT_FN_COND(hcall_entry,
 
 	TP_PROTO(unsigned long opcode, unsigned long *args),
 
 	TP_ARGS(opcode, args),
 
+	TP_CONDITION(cpu_online(raw_smp_processor_id())),
+
 	TP_STRUCT__entry(
 		__field(unsigned long, opcode)
 	),
@@ -76,13 +78,15 @@ TRACE_EVENT_FN(hcall_entry,
 	hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc
 );
 
-TRACE_EVENT_FN(hcall_exit,
+TRACE_EVENT_FN_COND(hcall_exit,
 
 	TP_PROTO(unsigned long opcode, unsigned long retval,
 		unsigned long *retbuf),
 
 	TP_ARGS(opcode, retval, retbuf),
 
+	TP_CONDITION(cpu_online(raw_smp_processor_id())),
+
 	TP_STRUCT__entry(
 		__field(unsigned long, opcode)
 		__field(unsigned long, retval)
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 2a8ebae09..b7c20f0b8 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -274,21 +274,6 @@ do {								\
 	__gu_err;						\
 })
 
-#ifndef __powerpc64__
-#define __get_user64_nocheck(x, ptr, size)			\
-({								\
-	long __gu_err;						\
-	long long __gu_val;					\
-	__typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	__chk_user_ptr(ptr);					\
-	if (!is_kernel_addr((unsigned long)__gu_addr))		\
-		might_fault();					\
-	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-#endif /* __powerpc64__ */
-
 #define __get_user_check(x, ptr, size)					\
 ({									\
 	long __gu_err = -EFAULT;					\
diff --git a/arch/powerpc/include/asm/ucc.h b/arch/powerpc/include/asm/ucc.h
deleted file mode 100644
index 6927ac265..000000000
--- a/arch/powerpc/include/asm/ucc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * Internal header file for UCC unit routines.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_H__
-#define __UCC_H__
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#define STATISTICS
-
-#define UCC_MAX_NUM	8
-
-/* Slow or fast type for UCCs.
-*/
-enum ucc_speed_type {
-	UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
-	UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
-};
-
-/* ucc_set_type
- * Sets UCC to slow or fast mode.
- *
- * ucc_num - (In) number of UCC (0-7).
- * speed   - (In) slow or fast mode for UCC.
- */
-int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
-
-int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
-
-int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
-	enum comm_dir mode);
-
-int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
-
-/* QE MUX clock routing for UCC
-*/
-static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
-{
-	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
-}
-
-static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
-{
-	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
-}
-
-static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
-{
-	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
-}
-
-#endif				/* __UCC_H__ */
diff --git a/arch/powerpc/include/asm/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h
deleted file mode 100644
index 72ea9bab0..000000000
--- a/arch/powerpc/include/asm/ucc_fast.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Internal header file for UCC FAST unit routines.
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_FAST_H__
-#define __UCC_FAST_H__
-
-#include <linux/kernel.h>
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-
-/* Receive BD's status */
-#define R_E	0x80000000	/* buffer empty */
-#define R_W	0x20000000	/* wrap bit */
-#define R_I	0x10000000	/* interrupt on reception */
-#define R_L	0x08000000	/* last */
-#define R_F	0x04000000	/* first */
-
-/* transmit BD's status */
-#define T_R	0x80000000	/* ready bit */
-#define T_W	0x20000000	/* wrap bit */
-#define T_I	0x10000000	/* interrupt on completion */
-#define T_L	0x08000000	/* last */
-
-/* Rx Data buffer must be 4 bytes aligned in most cases */
-#define UCC_FAST_RX_ALIGN			4
-#define UCC_FAST_MRBLR_ALIGNMENT		4
-#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8
-
-/* Sizes */
-#define UCC_FAST_URFS_MIN_VAL				0x88
-#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR	8
-
-/* ucc_fast_channel_protocol_mode - UCC FAST mode */
-enum ucc_fast_channel_protocol_mode {
-	UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
-	UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
-	UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
-	UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
-	UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
-	UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
-	UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
-	UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
-	UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
-	UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
-	UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
-};
-
-/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
-enum ucc_fast_transparent_txrx {
-	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
-	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
-};
-
-/* UCC fast diagnostic mode */
-enum ucc_fast_diag_mode {
-	UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
-	UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
-	UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
-	UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
-};
-
-/* UCC fast Sync length (transparent mode only) */
-enum ucc_fast_sync_len {
-	UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
-	UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
-	UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
-	UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
-};
-
-/* UCC fast RTS mode */
-enum ucc_fast_ready_to_send {
-	UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
-	UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
-};
-
-/* UCC fast receiver decoding mode */
-enum ucc_fast_rx_decoding_method {
-	UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
-	UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
-	UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
-	UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
-};
-
-/* UCC fast transmitter encoding mode */
-enum ucc_fast_tx_encoding_method {
-	UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
-	UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
-	UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
-	UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
-};
-
-/* UCC fast CRC length */
-enum ucc_fast_transparent_tcrc {
-	UCC_FAST_16_BIT_CRC = 0x00000000,
-	UCC_FAST_CRC_RESERVED0 = 0x00000040,
-	UCC_FAST_32_BIT_CRC = 0x00000080,
-	UCC_FAST_CRC_RESERVED1 = 0x000000C0
-};
-
-/* Fast UCC initialization structure */
-struct ucc_fast_info {
-	int ucc_num;
-	enum qe_clock rx_clock;
-	enum qe_clock tx_clock;
-	u32 regs;
-	int irq;
-	u32 uccm_mask;
-	int bd_mem_part;
-	int brkpt_support;
-	int grant_support;
-	int tsa;
-	int cdp;
-	int cds;
-	int ctsp;
-	int ctss;
-	int tci;
-	int txsy;
-	int rtsm;
-	int revd;
-	int rsyn;
-	u16 max_rx_buf_length;
-	u16 urfs;
-	u16 urfet;
-	u16 urfset;
-	u16 utfs;
-	u16 utfet;
-	u16 utftt;
-	u16 ufpt;
-	enum ucc_fast_channel_protocol_mode mode;
-	enum ucc_fast_transparent_txrx ttx_trx;
-	enum ucc_fast_tx_encoding_method tenc;
-	enum ucc_fast_rx_decoding_method renc;
-	enum ucc_fast_transparent_tcrc tcrc;
-	enum ucc_fast_sync_len synl;
-};
-
-struct ucc_fast_private {
-	struct ucc_fast_info *uf_info;
-	struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
-	u32 __iomem *p_ucce;	/* a pointer to the event register in memory. */
-	u32 __iomem *p_uccm;	/* a pointer to the mask register in memory. */
-#ifdef CONFIG_UGETH_TX_ON_DEMAND
-	u16 __iomem *p_utodr;	/* pointer to the transmit on demand register */
-#endif
-	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
-	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
-	int stopped_tx;		/* Whether channel has been stopped for Tx
-				   (STOP_TX, etc.) */
-	int stopped_rx;		/* Whether channel has been stopped for Rx */
-	u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
-						    virtual fifo */
-	u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
-						    virtual fifo */
-#ifdef STATISTICS
-	u32 tx_frames;		/* Transmitted frames counter. */
-	u32 rx_frames;		/* Received frames counter (only frames
-				   passed to application). */
-	u32 tx_discarded;	/* Discarded tx frames counter (frames that
-				   were discarded by the driver due to errors).
-				   */
-	u32 rx_discarded;	/* Discarded rx frames counter (frames that
-				   were discarded by the driver due to errors).
-				   */
-#endif				/* STATISTICS */
-	u16 mrblr;		/* maximum receive buffer length */
-};
-
-/* ucc_fast_init
- * Initializes Fast UCC according to user provided parameters.
- *
- * uf_info  - (In) pointer to the fast UCC info structure.
- * uccf_ret - (Out) pointer to the fast UCC structure.
- */
-int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
-
-/* ucc_fast_free
- * Frees all resources for fast UCC.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_free(struct ucc_fast_private * uccf);
-
-/* ucc_fast_enable
- * Enables a fast UCC port.
- * This routine enables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccf - (In) pointer to the fast UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
-
-/* ucc_fast_disable
- * Disables a fast UCC port.
- * This routine disables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccf - (In) pointer to the fast UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
-
-/* ucc_fast_irq
- * Handles interrupts on fast UCC.
- * Called from the general interrupt routine to handle interrupts on fast UCC.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_irq(struct ucc_fast_private * uccf);
-
-/* ucc_fast_transmit_on_demand
- * Immediately forces a poll of the transmitter for data to be sent.
- * Typically, the hardware performs a periodic poll for data that the
- * transmit routine has set up to be transmitted. In cases where
- * this polling cycle is not soon enough, this optional routine can
- * be invoked to force a poll right away, instead. Proper use for
- * each transmission for which this functionality is desired is to
- * call the transmit routine and then this routine right after.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
-
-u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
-
-void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
-
-#endif				/* __UCC_FAST_H__ */
diff --git a/arch/powerpc/include/asm/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h
deleted file mode 100644
index 233ef5fe5..000000000
--- a/arch/powerpc/include/asm/ucc_slow.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * Internal header file for UCC SLOW unit routines.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_SLOW_H__
-#define __UCC_SLOW_H__
-
-#include <linux/kernel.h>
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-
-/* transmit BD's status */
-#define T_R	0x80000000	/* ready bit */
-#define T_PAD	0x40000000	/* add pads to short frames */
-#define T_W	0x20000000	/* wrap bit */
-#define T_I	0x10000000	/* interrupt on completion */
-#define T_L	0x08000000	/* last */
-
-#define T_A	0x04000000	/* Address - the data transmitted as address
-				   chars */
-#define T_TC	0x04000000	/* transmit CRC */
-#define T_CM	0x02000000	/* continuous mode */
-#define T_DEF	0x02000000	/* collision on previous attempt to transmit */
-#define T_P	0x01000000	/* Preamble - send Preamble sequence before
-				   data */
-#define T_HB	0x01000000	/* heartbeat */
-#define T_NS	0x00800000	/* No Stop */
-#define T_LC	0x00800000	/* late collision */
-#define T_RL	0x00400000	/* retransmission limit */
-#define T_UN	0x00020000	/* underrun */
-#define T_CT	0x00010000	/* CTS lost */
-#define T_CSL	0x00010000	/* carrier sense lost */
-#define T_RC	0x003c0000	/* retry count */
-
-/* Receive BD's status */
-#define R_E	0x80000000	/* buffer empty */
-#define R_W	0x20000000	/* wrap bit */
-#define R_I	0x10000000	/* interrupt on reception */
-#define R_L	0x08000000	/* last */
-#define R_C	0x08000000	/* the last byte in this buffer is a cntl
-				   char */
-#define R_F	0x04000000	/* first */
-#define R_A	0x04000000	/* the first byte in this buffer is address
-				   byte */
-#define R_CM	0x02000000	/* continuous mode */
-#define R_ID	0x01000000	/* buffer close on reception of idles */
-#define R_M	0x01000000	/* Frame received because of promiscuous
-				   mode */
-#define R_AM	0x00800000	/* Address match */
-#define R_DE	0x00800000	/* Address match */
-#define R_LG	0x00200000	/* Break received */
-#define R_BR	0x00200000	/* Frame length violation */
-#define R_NO	0x00100000	/* Rx Non Octet Aligned Packet */
-#define R_FR	0x00100000	/* Framing Error (no stop bit) character
-				   received */
-#define R_PR	0x00080000	/* Parity Error character received */
-#define R_AB	0x00080000	/* Frame Aborted */
-#define R_SH	0x00080000	/* frame is too short */
-#define R_CR	0x00040000	/* CRC Error */
-#define R_OV	0x00020000	/* Overrun */
-#define R_CD	0x00010000	/* CD lost */
-#define R_CL	0x00010000	/* this frame is closed because of a
-				   collision */
-
-/* Rx Data buffer must be 4 bytes aligned in most cases.*/
-#define UCC_SLOW_RX_ALIGN		4
-#define UCC_SLOW_MRBLR_ALIGNMENT	4
-#define UCC_SLOW_PRAM_SIZE		0x100
-#define ALIGNMENT_OF_UCC_SLOW_PRAM	64
-
-/* UCC Slow Channel Protocol Mode */
-enum ucc_slow_channel_protocol_mode {
-	UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
-	UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
-	UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
-};
-
-/* UCC Slow Transparent Transmit CRC (TCRC) */
-enum ucc_slow_transparent_tcrc {
-	/* 16-bit CCITT CRC (HDLC).  (X16 + X12 + X5 + 1) */
-	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
-	/* CRC16 (BISYNC).  (X16 + X15 + X2 + 1) */
-	UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
-	/* 32-bit CCITT CRC (Ethernet and HDLC) */
-	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
-};
-
-/* UCC Slow oversampling rate for transmitter (TDCR) */
-enum ucc_slow_tx_oversampling_rate {
-	/* 1x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
-	/* 8x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
-	/* 16x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
-	/* 32x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
-};
-
-/* UCC Slow Oversampling rate for receiver (RDCR)
-*/
-enum ucc_slow_rx_oversampling_rate {
-	/* 1x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
-	/* 8x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
-	/* 16x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
-	/* 32x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
-};
-
-/* UCC Slow Transmitter encoding method (TENC)
-*/
-enum ucc_slow_tx_encoding_method {
-	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
-	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
-};
-
-/* UCC Slow Receiver decoding method (RENC)
-*/
-enum ucc_slow_rx_decoding_method {
-	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
-	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
-};
-
-/* UCC Slow Diagnostic mode (DIAG)
-*/
-enum ucc_slow_diag_mode {
-	UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
-	UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
-	UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
-	UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
-};
-
-struct ucc_slow_info {
-	int ucc_num;
-	int protocol;			/* QE_CR_PROTOCOL_xxx */
-	enum qe_clock rx_clock;
-	enum qe_clock tx_clock;
-	phys_addr_t regs;
-	int irq;
-	u16 uccm_mask;
-	int data_mem_part;
-	int init_tx;
-	int init_rx;
-	u32 tx_bd_ring_len;
-	u32 rx_bd_ring_len;
-	int rx_interrupts;
-	int brkpt_support;
-	int grant_support;
-	int tsa;
-	int cdp;
-	int cds;
-	int ctsp;
-	int ctss;
-	int rinv;
-	int tinv;
-	int rtsm;
-	int rfw;
-	int tci;
-	int tend;
-	int tfl;
-	int txsy;
-	u16 max_rx_buf_length;
-	enum ucc_slow_transparent_tcrc tcrc;
-	enum ucc_slow_channel_protocol_mode mode;
-	enum ucc_slow_diag_mode diag;
-	enum ucc_slow_tx_oversampling_rate tdcr;
-	enum ucc_slow_rx_oversampling_rate rdcr;
-	enum ucc_slow_tx_encoding_method tenc;
-	enum ucc_slow_rx_decoding_method renc;
-};
-
-struct ucc_slow_private {
-	struct ucc_slow_info *us_info;
-	struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
-	struct ucc_slow_pram *us_pram;	/* a pointer to the parameter RAM */
-	u32 us_pram_offset;
-	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
-	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
-	int stopped_tx;		/* Whether channel has been stopped for Tx
-				   (STOP_TX, etc.) */
-	int stopped_rx;		/* Whether channel has been stopped for Rx */
-	struct list_head confQ;	/* frames passed to chip waiting for tx */
-	u32 first_tx_bd_mask;	/* mask is used in Tx routine to save status
-				   and length for first BD in a frame */
-	u32 tx_base_offset;	/* first BD in Tx BD table offset (In MURAM) */
-	u32 rx_base_offset;	/* first BD in Rx BD table offset (In MURAM) */
-	struct qe_bd *confBd;	/* next BD for confirm after Tx */
-	struct qe_bd *tx_bd;	/* next BD for new Tx request */
-	struct qe_bd *rx_bd;	/* next BD to collect after Rx */
-	void *p_rx_frame;	/* accumulating receive frame */
-	u16 *p_ucce;		/* a pointer to the event register in memory.
-				 */
-	u16 *p_uccm;		/* a pointer to the mask register in memory */
-	u16 saved_uccm;		/* a saved mask for the RX Interrupt bits */
-#ifdef STATISTICS
-	u32 tx_frames;		/* Transmitted frames counters */
-	u32 rx_frames;		/* Received frames counters (only frames
-				   passed to application) */
-	u32 rx_discarded;	/* Discarded frames counters (frames that
-				   were discarded by the driver due to
-				   errors) */
-#endif				/* STATISTICS */
-};
-
-/* ucc_slow_init
- * Initializes Slow UCC according to provided parameters.
- *
- * us_info  - (In) pointer to the slow UCC info structure.
- * uccs_ret - (Out) pointer to the slow UCC structure.
- */
-int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
-
-/* ucc_slow_free
- * Frees all resources for slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_free(struct ucc_slow_private * uccs);
-
-/* ucc_slow_enable
- * Enables a fast UCC port.
- * This routine enables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccs - (In) pointer to the slow UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
-
-/* ucc_slow_disable
- * Disables a fast UCC port.
- * This routine disables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccs - (In) pointer to the slow UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
-
-/* ucc_slow_graceful_stop_tx
- * Smoothly stops transmission on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
-
-/* ucc_slow_stop_tx
- * Stops transmission on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
-
-/* ucc_slow_restart_tx
- * Restarts transmitting on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
-
-u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
-
-#endif				/* __UCC_SLOW_H__ */
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 4b6b8ace1..1f2594d45 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -12,10 +12,9 @@
 #include <uapi/asm/unistd.h>
 
 
-#define __NR_syscalls		379
+#define NR_syscalls		380
 
 #define __NR__exit __NR_exit
-#define NR_syscalls	__NR_syscalls
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
index b73a8199f..1afe90ade 100644
--- a/arch/powerpc/include/asm/vdso_datapage.h
+++ b/arch/powerpc/include/asm/vdso_datapage.h
@@ -41,7 +41,7 @@
 #include <linux/unistd.h>
 #include <linux/time.h>
 
-#define SYSCALL_MAP_SIZE      ((__NR_syscalls + 31) / 32)
+#define SYSCALL_MAP_SIZE      ((NR_syscalls + 31) / 32)
 
 /*
  * So here is the ppc64 backward compatible version
diff --git a/arch/powerpc/include/uapi/asm/cputable.h b/arch/powerpc/include/uapi/asm/cputable.h
index 43686043e..8dde19962 100644
--- a/arch/powerpc/include/uapi/asm/cputable.h
+++ b/arch/powerpc/include/uapi/asm/cputable.h
@@ -43,5 +43,7 @@
 #define PPC_FEATURE2_TAR		0x04000000
 #define PPC_FEATURE2_VEC_CRYPTO		0x02000000
 #define PPC_FEATURE2_HTM_NOSC		0x01000000
+#define PPC_FEATURE2_ARCH_3_00		0x00800000 /* ISA 3.00 */
+#define PPC_FEATURE2_HAS_IEEE128	0x00400000 /* VSX IEEE Binary Float 128-bit */
 
 #endif /* _UAPI__ASM_POWERPC_CPUTABLE_H */
diff --git a/arch/powerpc/include/uapi/asm/socket.h b/arch/powerpc/include/uapi/asm/socket.h
index c04666603..dd54f28ec 100644
--- a/arch/powerpc/include/uapi/asm/socket.h
+++ b/arch/powerpc/include/uapi/asm/socket.h
@@ -92,4 +92,7 @@
 #define SO_ATTACH_BPF		50
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	51
+#define SO_ATTACH_REUSEPORT_EBPF	52
+
 #endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h
index 12a056523..940290d45 100644
--- a/arch/powerpc/include/uapi/asm/unistd.h
+++ b/arch/powerpc/include/uapi/asm/unistd.h
@@ -389,5 +389,6 @@
 #define __NR_userfaultfd	364
 #define __NR_membarrier		365
 #define __NR_mlock2		378
+#define __NR_copy_file_range	379
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */