Initial import

1 files changed, 717 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
new file mode 100644
index 000000000..2039397cc
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -0,0 +1,717 @@
+/*
+ * The file intends to implement the platform dependent EEH operations on pseries.
+ * Actually, the pseries platform is built based on RTAS heavily. That means the
+ * pseries platform dependent EEH operations will be built on RTAS calls. The functions
+ * are devired from arch/powerpc/platforms/pseries/eeh.c and necessary cleanup has
+ * been done.
+ *
+ * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2011.
+ * Copyright IBM Corporation 2001, 2005, 2006
+ * Copyright Dave Engebretsen & Todd Inglett 2001
+ * Copyright Linas Vepstas 2005, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/atomic.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/rbtree.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/rtas.h>
+
+/* RTAS tokens */
+static int ibm_set_eeh_option;
+static int ibm_set_slot_reset;
+static int ibm_read_slot_reset_state;
+static int ibm_read_slot_reset_state2;
+static int ibm_slot_error_detail;
+static int ibm_get_config_addr_info;
+static int ibm_get_config_addr_info2;
+static int ibm_configure_bridge;
+static int ibm_configure_pe;
+
+/*
+ * Buffer for reporting slot-error-detail rtas calls. Its here
+ * in BSS, and not dynamically alloced, so that it ends up in
+ * RMO where RTAS can access it.
+ */
+static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX];
+static DEFINE_SPINLOCK(slot_errbuf_lock);
+static int eeh_error_buf_size;
+
+/**
+ * pseries_eeh_init - EEH platform dependent initialization
+ *
+ * EEH platform dependent initialization on pseries.
+ */
+static int pseries_eeh_init(void)
+{
+	/* figure out EEH RTAS function call tokens */
+	ibm_set_eeh_option		= rtas_token("ibm,set-eeh-option");
+	ibm_set_slot_reset		= rtas_token("ibm,set-slot-reset");
+	ibm_read_slot_reset_state2	= rtas_token("ibm,read-slot-reset-state2");
+	ibm_read_slot_reset_state	= rtas_token("ibm,read-slot-reset-state");
+	ibm_slot_error_detail		= rtas_token("ibm,slot-error-detail");
+	ibm_get_config_addr_info2	= rtas_token("ibm,get-config-addr-info2");
+	ibm_get_config_addr_info	= rtas_token("ibm,get-config-addr-info");
+	ibm_configure_pe		= rtas_token("ibm,configure-pe");
+	ibm_configure_bridge		= rtas_token("ibm,configure-bridge");
+
+	/*
+	 * Necessary sanity check. We needn't check "get-config-addr-info"
+	 * and its variant since the old firmware probably support address
+	 * of domain/bus/slot/function for EEH RTAS operations.
+	 */
+	if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE		||
+	    ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE		||
+	    (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
+	     ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE)	||
+	    ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE	||
+	    (ibm_configure_pe == RTAS_UNKNOWN_SERVICE		&&
+	     ibm_configure_bridge == RTAS_UNKNOWN_SERVICE)) {
+		pr_info("EEH functionality not supported\n");
+		return -EINVAL;
+	}
+
+	/* Initialize error log lock and size */
+	spin_lock_init(&slot_errbuf_lock);
+	eeh_error_buf_size = rtas_token("rtas-error-log-max");
+	if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) {
+		pr_info("%s: unknown EEH error log size\n",
+			__func__);
+		eeh_error_buf_size = 1024;
+	} else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) {
+		pr_info("%s: EEH error log size %d exceeds the maximal %d\n",
+			__func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX);
+		eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
+	}
+
+	/* Set EEH probe mode */
+	eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG);
+
+	return 0;
+}
+
+static int pseries_eeh_cap_start(struct pci_dn *pdn)
+{
+	u32 status;
+
+	if (!pdn)
+		return 0;
+
+	rtas_read_config(pdn, PCI_STATUS, 2, &status);
+	if (!(status & PCI_STATUS_CAP_LIST))
+		return 0;
+
+	return PCI_CAPABILITY_LIST;
+}
+
+
+static int pseries_eeh_find_cap(struct pci_dn *pdn, int cap)
+{
+	int pos = pseries_eeh_cap_start(pdn);
+	int cnt = 48;	/* Maximal number of capabilities */
+	u32 id;
+
+	if (!pos)
+		return 0;
+
+        while (cnt--) {
+		rtas_read_config(pdn, pos, 1, &pos);
+		if (pos < 0x40)
+			break;
+		pos &= ~3;
+		rtas_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+		pos += PCI_CAP_LIST_NEXT;
+	}
+
+	return 0;
+}
+
+static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap)
+{
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	u32 header;
+	int pos = 256;
+	int ttl = (4096 - 256) / 8;
+
+	if (!edev || !edev->pcie_cap)
+		return 0;
+	if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+		return 0;
+	else if (!header)
+		return 0;
+
+	while (ttl-- > 0) {
+		if (PCI_EXT_CAP_ID(header) == cap && pos)
+			return pos;
+
+		pos = PCI_EXT_CAP_NEXT(header);
+		if (pos < 256)
+			break;
+
+		if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+			break;
+	}
+
+	return 0;
+}
+
+/**
+ * pseries_eeh_probe - EEH probe on the given device
+ * @pdn: PCI device node
+ * @data: Unused
+ *
+ * When EEH module is installed during system boot, all PCI devices
+ * are checked one by one to see if it supports EEH. The function
+ * is introduced for the purpose.
+ */
+static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
+{
+	struct eeh_dev *edev;
+	struct eeh_pe pe;
+	u32 pcie_flags;
+	int enable = 0;
+	int ret;
+
+	/* Retrieve OF node and eeh device */
+	edev = pdn_to_eeh_dev(pdn);
+	if (!edev || edev->pe)
+		return NULL;
+
+	/* Check class/vendor/device IDs */
+	if (!pdn->vendor_id || !pdn->device_id || !pdn->class_code)
+		return NULL;
+
+	/* Skip for PCI-ISA bridge */
+        if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
+		return NULL;
+
+	/*
+	 * Update class code and mode of eeh device. We need
+	 * correctly reflects that current device is root port
+	 * or PCIe switch downstream port.
+	 */
+	edev->class_code = pdn->class_code;
+	edev->pcix_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_PCIX);
+	edev->pcie_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
+	edev->aer_cap = pseries_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
+	edev->mode &= 0xFFFFFF00;
+	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		edev->mode |= EEH_DEV_BRIDGE;
+		if (edev->pcie_cap) {
+			rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+					 2, &pcie_flags);
+			pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
+			if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
+				edev->mode |= EEH_DEV_ROOT_PORT;
+			else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
+				edev->mode |= EEH_DEV_DS_PORT;
+		}
+	}
+
+	/* Initialize the fake PE */
+	memset(&pe, 0, sizeof(struct eeh_pe));
+	pe.phb = edev->phb;
+	pe.config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
+
+	/* Enable EEH on the device */
+	ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
+	if (!ret) {
+		/* Retrieve PE address */
+		edev->config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
+		edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
+		pe.addr = edev->pe_config_addr;
+
+		/* Some older systems (Power4) allow the ibm,set-eeh-option
+		 * call to succeed even on nodes where EEH is not supported.
+		 * Verify support explicitly.
+		 */
+		ret = eeh_ops->get_state(&pe, NULL);
+		if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
+			enable = 1;
+
+		if (enable) {
+			eeh_add_flag(EEH_ENABLED);
+			eeh_add_to_parent_pe(edev);
+
+			pr_debug("%s: EEH enabled on %02x:%02x.%01x PHB#%d-PE#%x\n",
+				__func__, pdn->busno, PCI_SLOT(pdn->devfn),
+				PCI_FUNC(pdn->devfn), pe.phb->global_number,
+				pe.addr);
+		} else if (pdn->parent && pdn_to_eeh_dev(pdn->parent) &&
+			   (pdn_to_eeh_dev(pdn->parent))->pe) {
+			/* This device doesn't support EEH, but it may have an
+			 * EEH parent, in which case we mark it as supported.
+			 */
+			edev->config_addr = pdn_to_eeh_dev(pdn->parent)->config_addr;
+			edev->pe_config_addr = pdn_to_eeh_dev(pdn->parent)->pe_config_addr;
+			eeh_add_to_parent_pe(edev);
+		}
+	}
+
+	/* Save memory bars */
+	eeh_save_bars(edev);
+
+	return NULL;
+}
+
+/**
+ * pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable
+ * @pe: EEH PE
+ * @option: operation to be issued
+ *
+ * The function is used to control the EEH functionality globally.
+ * Currently, following options are support according to PAPR:
+ * Enable EEH, Disable EEH, Enable MMIO and Enable DMA
+ */
+static int pseries_eeh_set_option(struct eeh_pe *pe, int option)
+{
+	int ret = 0;
+	int config_addr;
+
+	/*
+	 * When we're enabling or disabling EEH functioality on
+	 * the particular PE, the PE config address is possibly
+	 * unavailable. Therefore, we have to figure it out from
+	 * the FDT node.
+	 */
+	switch (option) {
+	case EEH_OPT_DISABLE:
+	case EEH_OPT_ENABLE:
+	case EEH_OPT_THAW_MMIO:
+	case EEH_OPT_THAW_DMA:
+		config_addr = pe->config_addr;
+		if (pe->addr)
+			config_addr = pe->addr;
+		break;
+	case EEH_OPT_FREEZE_PE:
+		/* Not support */
+		return 0;
+	default:
+		pr_err("%s: Invalid option %d\n",
+			__func__, option);
+		return -EINVAL;
+	}
+
+	ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
+			config_addr, BUID_HI(pe->phb->buid),
+			BUID_LO(pe->phb->buid), option);
+
+	return ret;
+}
+
+/**
+ * pseries_eeh_get_pe_addr - Retrieve PE address
+ * @pe: EEH PE
+ *
+ * Retrieve the assocated PE address. Actually, there're 2 RTAS
+ * function calls dedicated for the purpose. We need implement
+ * it through the new function and then the old one. Besides,
+ * you should make sure the config address is figured out from
+ * FDT node before calling the function.
+ *
+ * It's notable that zero'ed return value means invalid PE config
+ * address.
+ */
+static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
+{
+	int ret = 0;
+	int rets[3];
+
+	if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
+		/*
+		 * First of all, we need to make sure there has one PE
+		 * associated with the device. Otherwise, PE address is
+		 * meaningless.
+		 */
+		ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
+				pe->config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), 1);
+		if (ret || (rets[0] == 0))
+			return 0;
+
+		/* Retrieve the associated PE config address */
+		ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
+				pe->config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), 0);
+		if (ret) {
+			pr_warn("%s: Failed to get address for PHB#%d-PE#%x\n",
+				__func__, pe->phb->global_number, pe->config_addr);
+			return 0;
+		}
+
+		return rets[0];
+	}
+
+	if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
+		ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
+				pe->config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), 0);
+		if (ret) {
+			pr_warn("%s: Failed to get address for PHB#%d-PE#%x\n",
+				__func__, pe->phb->global_number, pe->config_addr);
+			return 0;
+		}
+
+		return rets[0];
+	}
+
+	return ret;
+}
+
+/**
+ * pseries_eeh_get_state - Retrieve PE state
+ * @pe: EEH PE
+ * @state: return value
+ *
+ * Retrieve the state of the specified PE. On RTAS compliant
+ * pseries platform, there already has one dedicated RTAS function
+ * for the purpose. It's notable that the associated PE config address
+ * might be ready when calling the function. Therefore, endeavour to
+ * use the PE config address if possible. Further more, there're 2
+ * RTAS calls for the purpose, we need to try the new one and back
+ * to the old one if the new one couldn't work properly.
+ */
+static int pseries_eeh_get_state(struct eeh_pe *pe, int *state)
+{
+	int config_addr;
+	int ret;
+	int rets[4];
+	int result;
+
+	/* Figure out PE config address if possible */
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
+
+	if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
+		ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets,
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
+	} else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) {
+		/* Fake PE unavailable info */
+		rets[2] = 0;
+		ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets,
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
+	} else {
+		return EEH_STATE_NOT_SUPPORT;
+	}
+
+	if (ret)
+		return ret;
+
+	/* Parse the result out */
+	result = 0;
+	if (rets[1]) {
+		switch(rets[0]) {
+		case 0:
+			result &= ~EEH_STATE_RESET_ACTIVE;
+			result |= EEH_STATE_MMIO_ACTIVE;
+			result |= EEH_STATE_DMA_ACTIVE;
+			break;
+		case 1:
+			result |= EEH_STATE_RESET_ACTIVE;
+			result |= EEH_STATE_MMIO_ACTIVE;
+			result |= EEH_STATE_DMA_ACTIVE;
+			break;
+		case 2:
+			result &= ~EEH_STATE_RESET_ACTIVE;
+			result &= ~EEH_STATE_MMIO_ACTIVE;
+			result &= ~EEH_STATE_DMA_ACTIVE;
+			break;
+		case 4:
+			result &= ~EEH_STATE_RESET_ACTIVE;
+			result &= ~EEH_STATE_MMIO_ACTIVE;
+			result &= ~EEH_STATE_DMA_ACTIVE;
+			result |= EEH_STATE_MMIO_ENABLED;
+			break;
+		case 5:
+			if (rets[2]) {
+				if (state) *state = rets[2];
+				result = EEH_STATE_UNAVAILABLE;
+			} else {
+				result = EEH_STATE_NOT_SUPPORT;
+			}
+			break;
+		default:
+			result = EEH_STATE_NOT_SUPPORT;
+		}
+	} else {
+		result = EEH_STATE_NOT_SUPPORT;
+	}
+
+	return result;
+}
+
+/**
+ * pseries_eeh_reset - Reset the specified PE
+ * @pe: EEH PE
+ * @option: reset option
+ *
+ * Reset the specified PE
+ */
+static int pseries_eeh_reset(struct eeh_pe *pe, int option)
+{
+	int config_addr;
+	int ret;
+
+	/* Figure out PE address */
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
+
+	/* Reset PE through RTAS call */
+	ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
+			config_addr, BUID_HI(pe->phb->buid),
+			BUID_LO(pe->phb->buid), option);
+
+	/* If fundamental-reset not supported, try hot-reset */
+	if (option == EEH_RESET_FUNDAMENTAL &&
+	    ret == -8) {
+		option = EEH_RESET_HOT;
+		ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), option);
+	}
+
+	/* We need reset hold or settlement delay */
+	if (option == EEH_RESET_FUNDAMENTAL ||
+	    option == EEH_RESET_HOT)
+		msleep(EEH_PE_RST_HOLD_TIME);
+	else
+		msleep(EEH_PE_RST_SETTLE_TIME);
+
+	return ret;
+}
+
+/**
+ * pseries_eeh_wait_state - Wait for PE state
+ * @pe: EEH PE
+ * @max_wait: maximal period in microsecond
+ *
+ * Wait for the state of associated PE. It might take some time
+ * to retrieve the PE's state.
+ */
+static int pseries_eeh_wait_state(struct eeh_pe *pe, int max_wait)
+{
+	int ret;
+	int mwait;
+
+	/*
+	 * According to PAPR, the state of PE might be temporarily
+	 * unavailable. Under the circumstance, we have to wait
+	 * for indicated time determined by firmware. The maximal
+	 * wait time is 5 minutes, which is acquired from the original
+	 * EEH implementation. Also, the original implementation
+	 * also defined the minimal wait time as 1 second.
+	 */
+#define EEH_STATE_MIN_WAIT_TIME	(1000)
+#define EEH_STATE_MAX_WAIT_TIME	(300 * 1000)
+
+	while (1) {
+		ret = pseries_eeh_get_state(pe, &mwait);
+
+		/*
+		 * If the PE's state is temporarily unavailable,
+		 * we have to wait for the specified time. Otherwise,
+		 * the PE's state will be returned immediately.
+		 */
+		if (ret != EEH_STATE_UNAVAILABLE)
+			return ret;
+
+		if (max_wait <= 0) {
+			pr_warn("%s: Timeout when getting PE's state (%d)\n",
+				__func__, max_wait);
+			return EEH_STATE_NOT_SUPPORT;
+		}
+
+		if (mwait <= 0) {
+			pr_warn("%s: Firmware returned bad wait value %d\n",
+				__func__, mwait);
+			mwait = EEH_STATE_MIN_WAIT_TIME;
+		} else if (mwait > EEH_STATE_MAX_WAIT_TIME) {
+			pr_warn("%s: Firmware returned too long wait value %d\n",
+				__func__, mwait);
+			mwait = EEH_STATE_MAX_WAIT_TIME;
+		}
+
+		max_wait -= mwait;
+		msleep(mwait);
+	}
+
+	return EEH_STATE_NOT_SUPPORT;
+}
+
+/**
+ * pseries_eeh_get_log - Retrieve error log
+ * @pe: EEH PE
+ * @severity: temporary or permanent error log
+ * @drv_log: driver log to be combined with retrieved error log
+ * @len: length of driver log
+ *
+ * Retrieve the temporary or permanent error from the PE.
+ * Actually, the error will be retrieved through the dedicated
+ * RTAS call.
+ */
+static int pseries_eeh_get_log(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len)
+{
+	int config_addr;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&slot_errbuf_lock, flags);
+	memset(slot_errbuf, 0, eeh_error_buf_size);
+
+	/* Figure out the PE address */
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
+
+	ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, config_addr,
+			BUID_HI(pe->phb->buid), BUID_LO(pe->phb->buid),
+			virt_to_phys(drv_log), len,
+			virt_to_phys(slot_errbuf), eeh_error_buf_size,
+			severity);
+	if (!ret)
+		log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0);
+	spin_unlock_irqrestore(&slot_errbuf_lock, flags);
+
+	return ret;
+}
+
+/**
+ * pseries_eeh_configure_bridge - Configure PCI bridges in the indicated PE
+ * @pe: EEH PE
+ *
+ * The function will be called to reconfigure the bridges included
+ * in the specified PE so that the mulfunctional PE would be recovered
+ * again.
+ */
+static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
+{
+	int config_addr;
+	int ret;
+
+	/* Figure out the PE address */
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
+
+	/* Use new configure-pe function, if supported */
+	if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
+		ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
+	} else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
+		ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
+	} else {
+		return -EFAULT;
+	}
+
+	if (ret)
+		pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
+			__func__, pe->phb->global_number, pe->addr, ret);
+
+	return ret;
+}
+
+/**
+ * pseries_eeh_read_config - Read PCI config space
+ * @pdn: PCI device node
+ * @where: PCI address
+ * @size: size to read
+ * @val: return value
+ *
+ * Read config space from the speicifed device
+ */
+static int pseries_eeh_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
+{
+	return rtas_read_config(pdn, where, size, val);
+}
+
+/**
+ * pseries_eeh_write_config - Write PCI config space
+ * @pdn: PCI device node
+ * @where: PCI address
+ * @size: size to write
+ * @val: value to be written
+ *
+ * Write config space to the specified device
+ */
+static int pseries_eeh_write_config(struct pci_dn *pdn, int where, int size, u32 val)
+{
+	return rtas_write_config(pdn, where, size, val);
+}
+
+static struct eeh_ops pseries_eeh_ops = {
+	.name			= "pseries",
+	.init			= pseries_eeh_init,
+	.probe			= pseries_eeh_probe,
+	.set_option		= pseries_eeh_set_option,
+	.get_pe_addr		= pseries_eeh_get_pe_addr,
+	.get_state		= pseries_eeh_get_state,
+	.reset			= pseries_eeh_reset,
+	.wait_state		= pseries_eeh_wait_state,
+	.get_log		= pseries_eeh_get_log,
+	.configure_bridge       = pseries_eeh_configure_bridge,
+	.err_inject		= NULL,
+	.read_config		= pseries_eeh_read_config,
+	.write_config		= pseries_eeh_write_config,
+	.next_error		= NULL,
+	.restore_config		= NULL
+};
+
+/**
+ * eeh_pseries_init - Register platform dependent EEH operations
+ *
+ * EEH initialization on pseries platform. This function should be
+ * called before any EEH related functions.
+ */
+static int __init eeh_pseries_init(void)
+{
+	int ret;
+
+	ret = eeh_ops_register(&pseries_eeh_ops);
+	if (!ret)
+		pr_info("EEH: pSeries platform initialized\n");
+	else
+		pr_info("EEH: pSeries platform initialization failure (%d)\n",
+			ret);
+
+	return ret;
+}
+machine_early_initcall(pseries, eeh_pseries_init);