Linux-libre 4.4-gnupck-4.4-gnu

36 files changed, 837 insertions, 258 deletions

diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 48bf38d0d..f09016f6b 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -10,6 +10,12 @@ config PPC_MPC512x
 	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
 	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
 
+config MPC512x_LPBFIFO
+	tristate "MPC512x LocalPlus Bus FIFO driver"
+	depends on PPC_MPC512x && MPC512X_DMA
+	help
+	  Enable support for Freescale MPC512x LocalPlus Bus FIFO (SCLPC).
+
 config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"
 	depends on PPC_MPC512x
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index 01693121a..f47d42295 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -5,4 +5,5 @@ obj-$(CONFIG_COMMON_CLK)	+= clock-commonclk.o
 obj-y				+= mpc512x_shared.o
 obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
 obj-$(CONFIG_MPC512x_GENERIC)	+= mpc512x_generic.o
+obj-$(CONFIG_MPC512x_LPBFIFO)	+= mpc512x_lpbfifo.o
 obj-$(CONFIG_PDM360NG)		+= pdm360ng.o
diff --git a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
new file mode 100644
index 000000000..8eb82b043
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
@@ -0,0 +1,540 @@
+/*
+ * The driver for Freescale MPC512x LocalPlus Bus FIFO
+ * (called SCLPC in the Reference Manual).
+ *
+ * Copyright (C) 2013-2015 Alexander Popov <alex.popov@linux.com>.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/mpc5121.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+
+#define DRV_NAME "mpc512x_lpbfifo"
+
+struct cs_range {
+	u32 csnum;
+	u32 base; /* must be zero */
+	u32 addr;
+	u32 size;
+};
+
+static struct lpbfifo_data {
+	spinlock_t lock; /* for protecting lpbfifo_data */
+	phys_addr_t regs_phys;
+	resource_size_t regs_size;
+	struct mpc512x_lpbfifo __iomem *regs;
+	int irq;
+	struct cs_range *cs_ranges;
+	size_t cs_n;
+	struct dma_chan *chan;
+	struct mpc512x_lpbfifo_request *req;
+	dma_addr_t ram_bus_addr;
+	bool wait_lpbfifo_irq;
+	bool wait_lpbfifo_callback;
+} lpbfifo;
+
+/*
+ * A data transfer from RAM to some device on LPB is finished
+ * when both mpc512x_lpbfifo_irq() and mpc512x_lpbfifo_callback()
+ * have been called. We execute the callback registered in
+ * mpc512x_lpbfifo_request just after that.
+ * But for a data transfer from some device on LPB to RAM we don't enable
+ * LPBFIFO interrupt because clearing MPC512X_SCLPC_SUCCESS interrupt flag
+ * automatically disables LPBFIFO reading request to the DMA controller
+ * and the data transfer hangs. So the callback registered in
+ * mpc512x_lpbfifo_request is executed at the end of mpc512x_lpbfifo_callback().
+ */
+
+/*
+ * mpc512x_lpbfifo_irq - IRQ handler for LPB FIFO
+ */
+static irqreturn_t mpc512x_lpbfifo_irq(int irq, void *param)
+{
+	struct device *dev = (struct device *)param;
+	struct mpc512x_lpbfifo_request *req = NULL;
+	unsigned long flags;
+	u32 status;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+
+	if (!lpbfifo.regs)
+		goto end;
+
+	req = lpbfifo.req;
+	if (!req || req->dir == MPC512X_LPBFIFO_REQ_DIR_READ) {
+		dev_err(dev, "bogus LPBFIFO IRQ\n");
+		goto end;
+	}
+
+	status = in_be32(&lpbfifo.regs->status);
+	if (status != MPC512X_SCLPC_SUCCESS) {
+		dev_err(dev, "DMA transfer from RAM to peripheral failed\n");
+		out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+		goto end;
+	}
+	/* Clear the interrupt flag */
+	out_be32(&lpbfifo.regs->status, MPC512X_SCLPC_SUCCESS);
+
+	lpbfifo.wait_lpbfifo_irq = false;
+
+	if (lpbfifo.wait_lpbfifo_callback)
+		goto end;
+
+	/* Transfer is finished, set the FIFO as idle */
+	lpbfifo.req = NULL;
+
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+	if (req->callback)
+		req->callback(req);
+
+	return IRQ_HANDLED;
+
+ end:
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+	return IRQ_HANDLED;
+}
+
+/*
+ * mpc512x_lpbfifo_callback is called by DMA driver when
+ * DMA transaction is finished.
+ */
+static void mpc512x_lpbfifo_callback(void *param)
+{
+	unsigned long flags;
+	struct mpc512x_lpbfifo_request *req = NULL;
+	enum dma_data_direction dir;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+
+	if (!lpbfifo.regs) {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+		return;
+	}
+
+	req = lpbfifo.req;
+	if (!req) {
+		pr_err("bogus LPBFIFO callback\n");
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+		return;
+	}
+
+	/* Release the mapping */
+	if (req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE)
+		dir = DMA_TO_DEVICE;
+	else
+		dir = DMA_FROM_DEVICE;
+	dma_unmap_single(lpbfifo.chan->device->dev,
+			lpbfifo.ram_bus_addr, req->size, dir);
+
+	lpbfifo.wait_lpbfifo_callback = false;
+
+	if (!lpbfifo.wait_lpbfifo_irq) {
+		/* Transfer is finished, set the FIFO as idle */
+		lpbfifo.req = NULL;
+
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+		if (req->callback)
+			req->callback(req);
+	} else {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+	}
+}
+
+static int mpc512x_lpbfifo_kick(void)
+{
+	u32 bits;
+	bool no_incr = false;
+	u32 bpt = 32; /* max bytes per LPBFIFO transaction involving DMA */
+	u32 cs = 0;
+	size_t i;
+	struct dma_device *dma_dev = NULL;
+	struct scatterlist sg;
+	enum dma_data_direction dir;
+	struct dma_slave_config dma_conf = {};
+	struct dma_async_tx_descriptor *dma_tx = NULL;
+	dma_cookie_t cookie;
+	int ret;
+
+	/*
+	 * 1. Fit the requirements:
+	 * - the packet size must be a multiple of 4 since FIFO Data Word
+	 *    Register allows only full-word access according the Reference
+	 *    Manual;
+	 * - the physical address of the device on LPB and the packet size
+	 *    must be aligned on BPT (bytes per transaction) or 8-bytes
+	 *    boundary according the Reference Manual;
+	 * - but we choose DMA maxburst equal (or very close to) BPT to prevent
+	 *    DMA controller from overtaking FIFO and causing FIFO underflow
+	 *    error. So we force the packet size to be aligned on BPT boundary
+	 *    not to confuse DMA driver which requires the packet size to be
+	 *    aligned on maxburst boundary;
+	 * - BPT should be set to the LPB device port size for operation with
+	 *    disabled auto-incrementing according Reference Manual.
+	 */
+	if (lpbfifo.req->size == 0 || !IS_ALIGNED(lpbfifo.req->size, 4))
+		return -EINVAL;
+
+	if (lpbfifo.req->portsize != LPB_DEV_PORTSIZE_UNDEFINED) {
+		bpt = lpbfifo.req->portsize;
+		no_incr = true;
+	}
+
+	while (bpt > 1) {
+		if (IS_ALIGNED(lpbfifo.req->dev_phys_addr, min(bpt, 0x8u)) &&
+					IS_ALIGNED(lpbfifo.req->size, bpt)) {
+			break;
+		}
+
+		if (no_incr)
+			return -EINVAL;
+
+		bpt >>= 1;
+	}
+	dma_conf.dst_maxburst = max(bpt, 0x4u) / 4;
+	dma_conf.src_maxburst = max(bpt, 0x4u) / 4;
+
+	for (i = 0; i < lpbfifo.cs_n; i++) {
+		phys_addr_t cs_start = lpbfifo.cs_ranges[i].addr;
+		phys_addr_t cs_end = cs_start + lpbfifo.cs_ranges[i].size;
+		phys_addr_t access_start = lpbfifo.req->dev_phys_addr;
+		phys_addr_t access_end = access_start + lpbfifo.req->size;
+
+		if (access_start >= cs_start && access_end <= cs_end) {
+			cs = lpbfifo.cs_ranges[i].csnum;
+			break;
+		}
+	}
+	if (i == lpbfifo.cs_n)
+		return -EFAULT;
+
+	/* 2. Prepare DMA */
+	dma_dev = lpbfifo.chan->device;
+
+	if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE) {
+		dir = DMA_TO_DEVICE;
+		dma_conf.direction = DMA_MEM_TO_DEV;
+		dma_conf.dst_addr = lpbfifo.regs_phys +
+				offsetof(struct mpc512x_lpbfifo, data_word);
+	} else {
+		dir = DMA_FROM_DEVICE;
+		dma_conf.direction = DMA_DEV_TO_MEM;
+		dma_conf.src_addr = lpbfifo.regs_phys +
+				offsetof(struct mpc512x_lpbfifo, data_word);
+	}
+	dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	/* Make DMA channel work with LPB FIFO data register */
+	if (dma_dev->device_config(lpbfifo.chan, &dma_conf)) {
+		ret = -EINVAL;
+		goto err_dma_prep;
+	}
+
+	sg_init_table(&sg, 1);
+
+	sg_dma_address(&sg) = dma_map_single(dma_dev->dev,
+			lpbfifo.req->ram_virt_addr, lpbfifo.req->size, dir);
+	if (dma_mapping_error(dma_dev->dev, sg_dma_address(&sg)))
+		return -EFAULT;
+
+	lpbfifo.ram_bus_addr = sg_dma_address(&sg); /* For freeing later */
+
+	sg_dma_len(&sg) = lpbfifo.req->size;
+
+	dma_tx = dmaengine_prep_slave_sg(lpbfifo.chan, &sg,
+						1, dma_conf.direction, 0);
+	if (!dma_tx) {
+		ret = -ENOSPC;
+		goto err_dma_prep;
+	}
+	dma_tx->callback = mpc512x_lpbfifo_callback;
+	dma_tx->callback_param = NULL;
+
+	/* 3. Prepare FIFO */
+	out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+	out_be32(&lpbfifo.regs->enable, 0x0);
+
+	/*
+	 * Configure the watermarks for write operation (RAM->DMA->FIFO->dev):
+	 * - high watermark 7 words according the Reference Manual,
+	 * - low watermark 512 bytes (half of the FIFO).
+	 * These watermarks don't work for read operation since the
+	 * MPC512X_SCLPC_FLUSH bit is set (according the Reference Manual).
+	 */
+	out_be32(&lpbfifo.regs->fifo_ctrl, MPC512X_SCLPC_FIFO_CTRL(0x7));
+	out_be32(&lpbfifo.regs->fifo_alarm, MPC512X_SCLPC_FIFO_ALARM(0x200));
+
+	/*
+	 * Start address is a physical address of the region which belongs
+	 * to the device on the LocalPlus Bus
+	 */
+	out_be32(&lpbfifo.regs->start_addr, lpbfifo.req->dev_phys_addr);
+
+	/*
+	 * Configure chip select, transfer direction, address increment option
+	 * and bytes per transaction option
+	 */
+	bits = MPC512X_SCLPC_CS(cs);
+	if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_READ)
+		bits |= MPC512X_SCLPC_READ | MPC512X_SCLPC_FLUSH;
+	if (no_incr)
+		bits |= MPC512X_SCLPC_DAI;
+	bits |= MPC512X_SCLPC_BPT(bpt);
+	out_be32(&lpbfifo.regs->ctrl, bits);
+
+	/* Unmask irqs */
+	bits = MPC512X_SCLPC_ENABLE | MPC512X_SCLPC_ABORT_INT_ENABLE;
+	if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE)
+		bits |= MPC512X_SCLPC_NORM_INT_ENABLE;
+	else
+		lpbfifo.wait_lpbfifo_irq = false;
+
+	out_be32(&lpbfifo.regs->enable, bits);
+
+	/* 4. Set packet size and kick FIFO off */
+	bits = lpbfifo.req->size | MPC512X_SCLPC_START;
+	out_be32(&lpbfifo.regs->pkt_size, bits);
+
+	/* 5. Finally kick DMA off */
+	cookie = dma_tx->tx_submit(dma_tx);
+	if (dma_submit_error(cookie)) {
+		ret = -ENOSPC;
+		goto err_dma_submit;
+	}
+
+	return 0;
+
+ err_dma_submit:
+	out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+ err_dma_prep:
+	dma_unmap_single(dma_dev->dev, sg_dma_address(&sg),
+						lpbfifo.req->size, dir);
+	return ret;
+}
+
+static int mpc512x_lpbfifo_submit_locked(struct mpc512x_lpbfifo_request *req)
+{
+	int ret = 0;
+
+	if (!lpbfifo.regs)
+		return -ENODEV;
+
+	/* Check whether a transfer is in progress */
+	if (lpbfifo.req)
+		return -EBUSY;
+
+	lpbfifo.wait_lpbfifo_irq = true;
+	lpbfifo.wait_lpbfifo_callback = true;
+	lpbfifo.req = req;
+
+	ret = mpc512x_lpbfifo_kick();
+	if (ret != 0)
+		lpbfifo.req = NULL; /* Set the FIFO as idle */
+
+	return ret;
+}
+
+int mpc512x_lpbfifo_submit(struct mpc512x_lpbfifo_request *req)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+	ret = mpc512x_lpbfifo_submit_locked(req);
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(mpc512x_lpbfifo_submit);
+
+/*
+ * LPBFIFO driver uses "ranges" property of "localbus" device tree node
+ * for being able to determine the chip select number of a client device
+ * ordering a DMA transfer.
+ */
+static int get_cs_ranges(struct device *dev)
+{
+	int ret = -ENODEV;
+	struct device_node *lb_node;
+	const u32 *addr_cells_p;
+	const u32 *size_cells_p;
+	int proplen;
+	size_t i;
+
+	lb_node = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-localbus");
+	if (!lb_node)
+		return ret;
+
+	/*
+	 * The node defined as compatible with 'fsl,mpc5121-localbus'
+	 * should have two address cells and one size cell.
+	 * Every item of its ranges property should consist of:
+	 * - the first address cell which is the chipselect number;
+	 * - the second address cell which is the offset in the chipselect,
+	 *    must be zero.
+	 * - CPU address of the beginning of an access window;
+	 * - the only size cell which is the size of an access window.
+	 */
+	addr_cells_p = of_get_property(lb_node, "#address-cells", NULL);
+	size_cells_p = of_get_property(lb_node, "#size-cells", NULL);
+	if (addr_cells_p == NULL || *addr_cells_p != 2 ||
+				size_cells_p == NULL ||	*size_cells_p != 1) {
+		goto end;
+	}
+
+	proplen = of_property_count_u32_elems(lb_node, "ranges");
+	if (proplen <= 0 || proplen % 4 != 0)
+		goto end;
+
+	lpbfifo.cs_n = proplen / 4;
+	lpbfifo.cs_ranges = devm_kcalloc(dev, lpbfifo.cs_n,
+					sizeof(struct cs_range), GFP_KERNEL);
+	if (!lpbfifo.cs_ranges)
+		goto end;
+
+	if (of_property_read_u32_array(lb_node, "ranges",
+				(u32 *)lpbfifo.cs_ranges, proplen) != 0) {
+		goto end;
+	}
+
+	for (i = 0; i < lpbfifo.cs_n; i++) {
+		if (lpbfifo.cs_ranges[i].base != 0)
+			goto end;
+	}
+
+	ret = 0;
+
+ end:
+	of_node_put(lb_node);
+	return ret;
+}
+
+static int mpc512x_lpbfifo_probe(struct platform_device *pdev)
+{
+	struct resource r;
+	int ret = 0;
+
+	memset(&lpbfifo, 0, sizeof(struct lpbfifo_data));
+	spin_lock_init(&lpbfifo.lock);
+
+	lpbfifo.chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
+	if (lpbfifo.chan == NULL)
+		return -EPROBE_DEFER;
+
+	if (of_address_to_resource(pdev->dev.of_node, 0, &r) != 0) {
+		dev_err(&pdev->dev, "bad 'reg' in 'sclpc' device tree node\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	lpbfifo.regs_phys = r.start;
+	lpbfifo.regs_size = resource_size(&r);
+
+	if (!devm_request_mem_region(&pdev->dev, lpbfifo.regs_phys,
+					lpbfifo.regs_size, DRV_NAME)) {
+		dev_err(&pdev->dev, "unable to request region\n");
+		ret = -EBUSY;
+		goto err0;
+	}
+
+	lpbfifo.regs = devm_ioremap(&pdev->dev,
+					lpbfifo.regs_phys, lpbfifo.regs_size);
+	if (!lpbfifo.regs) {
+		dev_err(&pdev->dev, "mapping registers failed\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+
+	if (get_cs_ranges(&pdev->dev) != 0) {
+		dev_err(&pdev->dev, "bad '/localbus' device tree node\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	lpbfifo.irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (lpbfifo.irq == NO_IRQ) {
+		dev_err(&pdev->dev, "mapping irq failed\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	if (request_irq(lpbfifo.irq, mpc512x_lpbfifo_irq, 0,
+						DRV_NAME, &pdev->dev) != 0) {
+		dev_err(&pdev->dev, "requesting irq failed\n");
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	dev_info(&pdev->dev, "probe succeeded\n");
+	return 0;
+
+ err1:
+	irq_dispose_mapping(lpbfifo.irq);
+ err0:
+	dma_release_channel(lpbfifo.chan);
+	return ret;
+}
+
+static int mpc512x_lpbfifo_remove(struct platform_device *pdev)
+{
+	unsigned long flags;
+	struct dma_device *dma_dev = lpbfifo.chan->device;
+	struct mpc512x_lpbfifo __iomem *regs = NULL;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+	regs = lpbfifo.regs;
+	lpbfifo.regs = NULL;
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+	dma_dev->device_terminate_all(lpbfifo.chan);
+	out_be32(&regs->enable, MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+
+	free_irq(lpbfifo.irq, &pdev->dev);
+	irq_dispose_mapping(lpbfifo.irq);
+	dma_release_channel(lpbfifo.chan);
+
+	return 0;
+}
+
+static const struct of_device_id mpc512x_lpbfifo_match[] = {
+	{ .compatible = "fsl,mpc512x-lpbfifo", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpc512x_lpbfifo_match);
+
+static struct platform_driver mpc512x_lpbfifo_driver = {
+	.probe = mpc512x_lpbfifo_probe,
+	.remove = mpc512x_lpbfifo_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = mpc512x_lpbfifo_match,
+	},
+};
+
+module_platform_driver(mpc512x_lpbfifo_driver);
+
+MODULE_AUTHOR("Alexander Popov <alex.popov@linux.com>");
+MODULE_DESCRIPTION("MPC512x LocalPlus Bus FIFO device driver");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 78ac19aef..3048e34db 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -724,7 +724,7 @@ static int mpc52xx_gpt_probe(struct platform_device *ofdev)
 {
 	struct mpc52xx_gpt_priv *gpt;
 
-	gpt = kzalloc(sizeof *gpt, GFP_KERNEL);
+	gpt = devm_kzalloc(&ofdev->dev, sizeof *gpt, GFP_KERNEL);
 	if (!gpt)
 		return -ENOMEM;
 
@@ -732,10 +732,8 @@ static int mpc52xx_gpt_probe(struct platform_device *ofdev)
 	gpt->dev = &ofdev->dev;
 	gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
 	gpt->regs = of_iomap(ofdev->dev.of_node, 0);
-	if (!gpt->regs) {
-		kfree(gpt);
+	if (!gpt->regs)
 		return -ENOMEM;
-	}
 
 	dev_set_drvdata(&ofdev->dev, gpt);
 
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index 251dcb90e..7bb42a010 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -568,6 +568,7 @@ static const struct of_device_id mpc52xx_lpbfifo_match[] = {
 	{ .compatible = "fsl,mpc5200-lpbfifo", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, mpc52xx_lpbfifo_match);
 
 static struct platform_driver mpc52xx_lpbfifo_driver = {
 	.driver = {
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index b39557120..46d05c94a 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -161,6 +161,7 @@ static const char * const boards[] __initconst = {
 	"fsl,T1042RDB",
 	"fsl,T1042RDB_PI",
 	"keymile,kmcoge4",
+	"varisys,CYRUS",
 	NULL
 };
 
@@ -214,7 +215,17 @@ define_machine(corenet_generic) {
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
+/*
+ * Core reset may cause issues if using the proxy mode of MPIC.
+ * So, use the mixed mode of MPIC if enabling CPU hotplug.
+ *
+ * Likewise, problems have been seen with kexec when coreint is enabled.
+ */
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_KEXEC)
+	.get_irq		= mpic_get_irq,
+#else
 	.get_irq		= mpic_get_coreint_irq,
+#endif
 	.restart		= fsl_rstcr_restart,
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index a392e94a0..f0be439ce 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -34,6 +34,7 @@
 #include <linux/of_device.h>
 #include <linux/phy.h>
 #include <linux/memblock.h>
+#include <linux/fsl/guts.h>
 
 #include <linux/atomic.h>
 #include <asm/time.h>
@@ -51,7 +52,6 @@
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
-#include <asm/fsl_guts.h>
 #include "smp.h"
 
 #include "mpc85xx.h"
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index e358bed66..50dcc00a0 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -17,6 +17,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -27,7 +28,6 @@
 #include <asm/mpic.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
-#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 6ac986d3f..371df822e 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -16,6 +16,7 @@
  * kind, whether express or implied.
  */
 
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 #include <asm/div64.h>
@@ -25,7 +26,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <asm/udbg.h>
-#include <asm/fsl_guts.h>
 #include <asm/fsl_lbc.h>
 #include "smp.h"
 
diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c
index 680232d6b..5087becaa 100644
--- a/arch/powerpc/platforms/85xx/p1022_rdk.c
+++ b/arch/powerpc/platforms/85xx/p1022_rdk.c
@@ -12,6 +12,7 @@
  * kind, whether express or implied.
  */
 
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 #include <asm/div64.h>
@@ -21,7 +22,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <asm/udbg.h>
-#include <asm/fsl_guts.h>
 #include "smp.h"
 
 #include "mpc85xx.h"
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index b8b821697..6b107cea1 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -19,6 +19,7 @@
 #include <linux/kexec.h>
 #include <linux/highmem.h>
 #include <linux/cpu.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -26,7 +27,6 @@
 #include <asm/mpic.h>
 #include <asm/cacheflush.h>
 #include <asm/dbell.h>
-#include <asm/fsl_guts.h>
 #include <asm/code-patching.h>
 #include <asm/cputhreads.h>
 
@@ -173,15 +173,22 @@ static inline u32 read_spin_table_addr_l(void *spin_table)
 static void wake_hw_thread(void *info)
 {
 	void fsl_secondary_thread_init(void);
-	unsigned long imsr1, inia1;
+	unsigned long imsr, inia;
 	int nr = *(const int *)info;
 
-	imsr1 = MSR_KERNEL;
-	inia1 = *(unsigned long *)fsl_secondary_thread_init;
-
-	mttmr(TMRN_IMSR1, imsr1);
-	mttmr(TMRN_INIA1, inia1);
-	mtspr(SPRN_TENS, TEN_THREAD(1));
+	imsr = MSR_KERNEL;
+	inia = *(unsigned long *)fsl_secondary_thread_init;
+
+	if (cpu_thread_in_core(nr) == 0) {
+		/* For when we boot on a secondary thread with kdump */
+		mttmr(TMRN_IMSR0, imsr);
+		mttmr(TMRN_INIA0, inia);
+		mtspr(SPRN_TENS, TEN_THREAD(0));
+	} else {
+		mttmr(TMRN_IMSR1, imsr);
+		mttmr(TMRN_INIA1, inia);
+		mtspr(SPRN_TENS, TEN_THREAD(1));
+	}
 
 	smp_generic_kick_cpu(nr);
 }
@@ -224,6 +231,12 @@ static int smp_85xx_kick_cpu(int nr)
 
 		smp_call_function_single(primary, wake_hw_thread, &nr, 0);
 		return 0;
+	} else if (cpu_thread_in_core(boot_cpuid) != 0 &&
+		   cpu_first_thread_sibling(boot_cpuid) == nr) {
+		if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
+			return -ENOENT;
+
+		smp_call_function_single(boot_cpuid, wake_hw_thread, &nr, 0);
 	}
 #endif
 
@@ -331,13 +344,14 @@ struct smp_ops_t smp_85xx_ops = {
 	.cpu_disable	= generic_cpu_disable,
 	.cpu_die	= generic_cpu_die,
 #endif
-#ifdef CONFIG_KEXEC
+#if defined(CONFIG_KEXEC) && !defined(CONFIG_PPC64)
 	.give_timebase	= smp_generic_give_timebase,
 	.take_timebase	= smp_generic_take_timebase,
 #endif
 };
 
 #ifdef CONFIG_KEXEC
+#ifdef CONFIG_PPC32
 atomic_t kexec_down_cpus = ATOMIC_INIT(0);
 
 void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
@@ -357,9 +371,64 @@ static void mpc85xx_smp_kexec_down(void *arg)
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0,1);
 }
+#else
+void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+	int cpu = smp_processor_id();
+	int sibling = cpu_last_thread_sibling(cpu);
+	bool notified = false;
+	int disable_cpu;
+	int disable_threadbit = 0;
+	long start = mftb();
+	long now;
+
+	local_irq_disable();
+	hard_irq_disable();
+	mpic_teardown_this_cpu(secondary);
+
+	if (cpu == crashing_cpu && cpu_thread_in_core(cpu) != 0) {
+		/*
+		 * We enter the crash kernel on whatever cpu crashed,
+		 * even if it's a secondary thread.  If that's the case,
+		 * disable the corresponding primary thread.
+		 */
+		disable_threadbit = 1;
+		disable_cpu = cpu_first_thread_sibling(cpu);
+	} else if (sibling != crashing_cpu &&
+		   cpu_thread_in_core(cpu) == 0 &&
+		   cpu_thread_in_core(sibling) != 0) {
+		disable_threadbit = 2;
+		disable_cpu = sibling;
+	}
+
+	if (disable_threadbit) {
+		while (paca[disable_cpu].kexec_state < KEXEC_STATE_REAL_MODE) {
+			barrier();
+			now = mftb();
+			if (!notified && now - start > 1000000) {
+				pr_info("%s/%d: waiting for cpu %d to enter KEXEC_STATE_REAL_MODE (%d)\n",
+					__func__, smp_processor_id(),
+					disable_cpu,
+					paca[disable_cpu].kexec_state);
+				notified = true;
+			}
+		}
+
+		if (notified) {
+			pr_info("%s: cpu %d done waiting\n",
+				__func__, disable_cpu);
+		}
+
+		mtspr(SPRN_TENC, disable_threadbit);
+		while (mfspr(SPRN_TENSR) & disable_threadbit)
+			cpu_relax();
+	}
+}
+#endif
 
 static void mpc85xx_smp_machine_kexec(struct kimage *image)
 {
+#ifdef CONFIG_PPC32
 	int timeout = INT_MAX;
 	int i, num_cpus = num_present_cpus();
 
@@ -380,6 +449,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
 		if ( i == smp_processor_id() ) continue;
 		mpic_reset_core(i);
 	}
+#endif
 
 	default_machine_kexec(image);
 }
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
index 30e002f46..892e61351 100644
--- a/arch/powerpc/platforms/85xx/twr_p102x.c
+++ b/arch/powerpc/platforms/85xx/twr_p102x.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 
@@ -23,7 +24,6 @@
 #include <asm/mpic.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
-#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 55413a547..437a9c372 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -38,7 +39,6 @@
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/simple_gpio.h>
-#include <asm/fsl_guts.h>
 
 #include "mpc86xx.h"
 
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index c140e94c7..142dff5e9 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -147,17 +147,6 @@ config 6xx
 	depends on PPC32 && PPC_BOOK3S
 	select PPC_HAVE_PMU_SUPPORT
 
-config TUNE_CELL
-	bool "Optimize for Cell Broadband Engine"
-	depends on PPC64 && PPC_BOOK3S
-	help
-	  Cause the compiler to optimize for the PPE of the Cell Broadband
-	  Engine. This will make the code run considerably faster on Cell
-	  but somewhat slower on other machines. This option only changes
-	  the scheduling of instructions, not the selection of instructions
-	  itself, so the resulting kernel will keep running on all other
-	  machines.
-
 # this is temp to handle compat with arch=ppc
 config 8xx
 	bool
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index b0ac1773c..429fc59d2 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -25,7 +25,7 @@ config PPC_CELL_NATIVE
 
 config PPC_IBM_CELL_BLADE
 	bool "IBM Cell Blade"
-	depends on PPC64 && PPC_BOOK3S
+	depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
 	select PPC_CELL_NATIVE
 	select PPC_OF_PLATFORM_PCI
 	select PCI
@@ -35,7 +35,7 @@ config PPC_IBM_CELL_BLADE
 
 config PPC_CELL_QPACE
 	bool "IBM Cell - QPACE"
-	depends on PPC64 && PPC_BOOK3S
+	depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
 	select PPC_CELL_COMMON
 
 config AXON_MSI
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index e0e68a1c0..aed771449 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -327,7 +327,7 @@ static void axon_msi_shutdown(struct platform_device *device)
 	u32 tmp;
 
 	pr_devel("axon_msi: disabling %s\n",
-		  msic->irq_domain->of_node->full_name);
+		 irq_domain_get_of_node(msic->irq_domain)->full_name);
 	tmp  = dcr_read(msic->dcr_host, MSIC_CTRL_REG);
 	tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE;
 	msic_dcr_write(msic, MSIC_CTRL_REG, tmp);
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 9d27de62d..54ee5743c 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -231,20 +231,23 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
 	const u32 *imap, *tmp;
 	int imaplen, intsize, unit;
 	struct device_node *iic;
+	struct device_node *of_node;
+
+	of_node = irq_domain_get_of_node(pic->host);
 
 	/* First, we check whether we have a real "interrupts" in the device
 	 * tree in case the device-tree is ever fixed
 	 */
-	virq = irq_of_parse_and_map(pic->host->of_node, 0);
+	virq = irq_of_parse_and_map(of_node, 0);
 	if (virq)
 		return virq;
 
 	/* Now do the horrible hacks */
-	tmp = of_get_property(pic->host->of_node, "#interrupt-cells", NULL);
+	tmp = of_get_property(of_node, "#interrupt-cells", NULL);
 	if (tmp == NULL)
 		return NO_IRQ;
 	intsize = *tmp;
-	imap = of_get_property(pic->host->of_node, "interrupt-map", &imaplen);
+	imap = of_get_property(of_node, "interrupt-map", &imaplen);
 	if (imap == NULL || imaplen < (intsize + 1))
 		return NO_IRQ;
 	iic = of_find_node_by_phandle(imap[intsize]);
diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig
index 1ea621a94..e359d0db0 100644
--- a/arch/powerpc/platforms/maple/Kconfig
+++ b/arch/powerpc/platforms/maple/Kconfig
@@ -1,5 +1,5 @@
 config PPC_MAPLE
-	depends on PPC64 && PPC_BOOK3S
+	depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
 	bool "Maple 970FX Evaluation Board"
 	select PCI
 	select MPIC
diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig
index a2aeb327d..00d4b28cb 100644
--- a/arch/powerpc/platforms/pasemi/Kconfig
+++ b/arch/powerpc/platforms/pasemi/Kconfig
@@ -1,5 +1,5 @@
 config PPC_PASEMI
-	depends on PPC64 && PPC_BOOK3S
+	depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
 	bool "PA Semi SoC-based platforms"
 	default n
 	select MPIC
diff --git a/arch/powerpc/platforms/pasemi/msi.c b/arch/powerpc/platforms/pasemi/msi.c
index b304a9fe5..d9af76342 100644
--- a/arch/powerpc/platforms/pasemi/msi.c
+++ b/arch/powerpc/platforms/pasemi/msi.c
@@ -144,9 +144,11 @@ int mpic_pasemi_msi_init(struct mpic *mpic)
 {
 	int rc;
 	struct pci_controller *phb;
+	struct device_node *of_node;
 
-	if (!mpic->irqhost->of_node ||
-	    !of_device_is_compatible(mpic->irqhost->of_node,
+	of_node = irq_domain_get_of_node(mpic->irqhost);
+	if (!of_node ||
+	    !of_device_is_compatible(of_node,
 				     "pasemi,pwrficient-openpic"))
 		return -ENODEV;
 
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig
index 607124bae..43c606268 100644
--- a/arch/powerpc/platforms/powermac/Kconfig
+++ b/arch/powerpc/platforms/powermac/Kconfig
@@ -1,6 +1,6 @@
 config PPC_PMAC
 	bool "Apple PowerMac based machines"
-	depends on PPC_BOOK3S
+	depends on PPC_BOOK3S && CPU_BIG_ENDIAN
 	select MPIC
 	select PCI
 	select PPC_INDIRECT_PCI if PPC32
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 3bb6acb76..e1c907255 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -43,17 +43,11 @@
 static bool pnv_eeh_nb_init = false;
 static int eeh_event_irq = -EINVAL;
 
-/**
- * pnv_eeh_init - EEH platform dependent initialization
- *
- * EEH platform dependent initialization on powernv
- */
 static int pnv_eeh_init(void)
 {
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
 
-	/* We require OPALv3 */
 	if (!firmware_has_feature(FW_FEATURE_OPALv3)) {
 		pr_warn("%s: OPALv3 is required !\n",
 			__func__);
@@ -77,9 +71,9 @@ static int pnv_eeh_init(void)
 		/*
 		 * PE#0 should be regarded as valid by EEH core
 		 * if it's not the reserved one. Currently, we
-		 * have the reserved PE#0 and PE#127 for PHB3
+		 * have the reserved PE#255 and PE#127 for PHB3
 		 * and P7IOC separately. So we should regard
-		 * PE#0 as valid for P7IOC.
+		 * PE#0 as valid for PHB3 and P7IOC.
 		 */
 		if (phb->ioda.reserved_pe != 0)
 			eeh_add_flag(EEH_VALID_PE_ZERO);
@@ -284,33 +278,23 @@ static int pnv_eeh_post_init(void)
 #endif /* CONFIG_DEBUG_FS */
 	}
 
-
 	return ret;
 }
 
-static int pnv_eeh_cap_start(struct pci_dn *pdn)
+static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap)
 {
-	u32 status;
+	int pos = PCI_CAPABILITY_LIST;
+	int cnt = 48;   /* Maximal number of capabilities */
+	u32 status, id;
 
 	if (!pdn)
 		return 0;
 
+	/* Check if the device supports capabilities */
 	pnv_pci_cfg_read(pdn, PCI_STATUS, 2, &status);
 	if (!(status & PCI_STATUS_CAP_LIST))
 		return 0;
 
-	return PCI_CAPABILITY_LIST;
-}
-
-static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap)
-{
-	int pos = pnv_eeh_cap_start(pdn);
-	int cnt = 48;   /* Maximal number of capabilities */
-	u32 id;
-
-	if (!pos)
-		return 0;
-
 	while (cnt--) {
 		pnv_pci_cfg_read(pdn, pos, 1, &pos);
 		if (pos < 0x40)
@@ -443,11 +427,14 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	 * that PE to block its config space.
 	 *
 	 * Broadcom Austin 4-ports NICs (14e4:1657)
+	 * Broadcom Shiner 4-ports 1G NICs (14e4:168a)
 	 * Broadcom Shiner 2-ports 10G NICs (14e4:168e)
 	 */
 	if ((pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
 	     pdn->device_id == 0x1657) ||
 	    (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+	     pdn->device_id == 0x168a) ||
+	    (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
 	     pdn->device_id == 0x168e))
 		edev->pe->state |= EEH_PE_CFG_RESTRICTED;
 
@@ -487,10 +474,9 @@ static int pnv_eeh_set_option(struct eeh_pe *pe, int option)
 	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
 	bool freeze_pe = false;
-	int opt, ret = 0;
+	int opt;
 	s64 rc;
 
-	/* Sanity check on option */
 	switch (option) {
 	case EEH_OPT_DISABLE:
 		return -EPERM;
@@ -511,38 +497,37 @@ static int pnv_eeh_set_option(struct eeh_pe *pe, int option)
 		return -EINVAL;
 	}
 
-	/* If PHB supports compound PE, to handle it */
+	/* Freeze master and slave PEs if PHB supports compound PEs */
 	if (freeze_pe) {
 		if (phb->freeze_pe) {
 			phb->freeze_pe(phb, pe->addr);
-		} else {
-			rc = opal_pci_eeh_freeze_set(phb->opal_id,
-						     pe->addr, opt);
-			if (rc != OPAL_SUCCESS) {
-				pr_warn("%s: Failure %lld freezing "
-					"PHB#%x-PE#%x\n",
-					__func__, rc,
-					phb->hose->global_number, pe->addr);
-				ret = -EIO;
-			}
+			return 0;
 		}
-	} else {
-		if (phb->unfreeze_pe) {
-			ret = phb->unfreeze_pe(phb, pe->addr, opt);
-		} else {
-			rc = opal_pci_eeh_freeze_clear(phb->opal_id,
-						       pe->addr, opt);
-			if (rc != OPAL_SUCCESS) {
-				pr_warn("%s: Failure %lld enable %d "
-					"for PHB#%x-PE#%x\n",
-					__func__, rc, option,
-					phb->hose->global_number, pe->addr);
-				ret = -EIO;
-			}
+
+		rc = opal_pci_eeh_freeze_set(phb->opal_id, pe->addr, opt);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n",
+				__func__, rc, phb->hose->global_number,
+				pe->addr);
+			return -EIO;
 		}
+
+		return 0;
 	}
 
-	return ret;
+	/* Unfreeze master and slave PEs if PHB supports */
+	if (phb->unfreeze_pe)
+		return phb->unfreeze_pe(phb, pe->addr, opt);
+
+	rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe->addr, opt);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld enable %d for PHB#%x-PE#%x\n",
+			__func__, rc, option, phb->hose->global_number,
+			pe->addr);
+		return -EIO;
+	}
+
+	return 0;
 }
 
 /**
@@ -1065,7 +1050,6 @@ static int pnv_eeh_err_inject(struct eeh_pe *pe, int type, int func,
 	struct pnv_phb *phb = hose->private_data;
 	s64 rc;
 
-	/* Sanity check on error type */
 	if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR &&
 	    type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) {
 		pr_warn("%s: Invalid error type %d\n",
diff --git a/arch/powerpc/platforms/powernv/opal-irqchip.c b/arch/powerpc/platforms/powernv/opal-irqchip.c
index 2c91ee780..e505223b4 100644
--- a/arch/powerpc/platforms/powernv/opal-irqchip.c
+++ b/arch/powerpc/platforms/powernv/opal-irqchip.c
@@ -43,11 +43,34 @@ static unsigned int opal_irq_count;
 static unsigned int *opal_irqs;
 
 static void opal_handle_irq_work(struct irq_work *work);
-static __be64 last_outstanding_events;
+static u64 last_outstanding_events;
 static struct irq_work opal_event_irq_work = {
 	.func = opal_handle_irq_work,
 };
 
+void opal_handle_events(uint64_t events)
+{
+	int virq, hwirq = 0;
+	u64 mask = opal_event_irqchip.mask;
+
+	if (!in_irq() && (events & mask)) {
+		last_outstanding_events = events;
+		irq_work_queue(&opal_event_irq_work);
+		return;
+	}
+
+	while (events & mask) {
+		hwirq = fls64(events) - 1;
+		if (BIT_ULL(hwirq) & mask) {
+			virq = irq_find_mapping(opal_event_irqchip.domain,
+						hwirq);
+			if (virq)
+				generic_handle_irq(virq);
+		}
+		events &= ~BIT_ULL(hwirq);
+	}
+}
+
 static void opal_event_mask(struct irq_data *d)
 {
 	clear_bit(d->hwirq, &opal_event_irqchip.mask);
@@ -55,9 +78,21 @@ static void opal_event_mask(struct irq_data *d)
 
 static void opal_event_unmask(struct irq_data *d)
 {
+	__be64 events;
+
 	set_bit(d->hwirq, &opal_event_irqchip.mask);
 
-	opal_poll_events(&last_outstanding_events);
+	opal_poll_events(&events);
+	last_outstanding_events = be64_to_cpu(events);
+
+	/*
+	 * We can't just handle the events now with opal_handle_events().
+	 * If we did we would deadlock when opal_event_unmask() is called from
+	 * handle_level_irq() with the irq descriptor lock held, because
+	 * calling opal_handle_events() would call generic_handle_irq() and
+	 * then handle_level_irq() which would try to take the descriptor lock
+	 * again. Instead queue the events for later.
+	 */
 	if (last_outstanding_events & opal_event_irqchip.mask)
 		/* Need to retrigger the interrupt */
 		irq_work_queue(&opal_event_irq_work);
@@ -96,29 +131,6 @@ static int opal_event_map(struct irq_domain *d, unsigned int irq,
 	return 0;
 }
 
-void opal_handle_events(uint64_t events)
-{
-	int virq, hwirq = 0;
-	u64 mask = opal_event_irqchip.mask;
-
-	if (!in_irq() && (events & mask)) {
-		last_outstanding_events = events;
-		irq_work_queue(&opal_event_irq_work);
-		return;
-	}
-
-	while (events & mask) {
-		hwirq = fls64(events) - 1;
-		if (BIT_ULL(hwirq) & mask) {
-			virq = irq_find_mapping(opal_event_irqchip.domain,
-						hwirq);
-			if (virq)
-				generic_handle_irq(virq);
-		}
-		events &= ~BIT_ULL(hwirq);
-	}
-}
-
 static irqreturn_t opal_interrupt(int irq, void *data)
 {
 	__be64 events;
@@ -131,13 +143,13 @@ static irqreturn_t opal_interrupt(int irq, void *data)
 
 static void opal_handle_irq_work(struct irq_work *work)
 {
-	opal_handle_events(be64_to_cpu(last_outstanding_events));
+	opal_handle_events(last_outstanding_events);
 }
 
 static int opal_event_match(struct irq_domain *h, struct device_node *node,
 			    enum irq_domain_bus_token bus_token)
 {
-	return h->of_node == node;
+	return irq_domain_get_of_node(h) == node;
 }
 
 static int opal_event_xlate(struct irq_domain *h, struct device_node *np,
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 4296d55e8..57cffb80b 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -278,7 +278,7 @@ static void opal_handle_message(void)
 
 	/* Sanity check */
 	if (type >= OPAL_MSG_TYPE_MAX) {
-		pr_warning("%s: Unknown message type: %u\n", __func__, type);
+		pr_warn_once("%s: Unknown message type: %u\n", __func__, type);
 		return;
 	}
 	opal_message_do_notify(type, (void *)&msg);
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 685b3cbe1..a9a8fa37a 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -187,7 +187,7 @@ static void pnv_kexec_wait_secondaries_down(void)
 
 	for_each_online_cpu(i) {
 		uint8_t status;
-		int64_t rc;
+		int64_t rc, timeout = 1000;
 
 		if (i == my_cpu)
 			continue;
@@ -204,6 +204,18 @@ static void pnv_kexec_wait_secondaries_down(void)
 				       i, paca[i].hw_cpu_id);
 				notified = i;
 			}
+
+			/*
+			 * On crash secondaries might be unreachable or hung,
+			 * so timeout if we've waited too long
+			 * */
+			mdelay(1);
+			if (timeout-- == 0) {
+				printk(KERN_ERR "kexec: timed out waiting for "
+				       "cpu %d (physical %d) to enter OPAL\n",
+				       i, paca[i].hw_cpu_id);
+				break;
+			}
 		}
 	}
 }
@@ -225,13 +237,6 @@ static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
 
 		/* Return the CPU to OPAL */
 		opal_return_cpu();
-	} else if (crash_shutdown) {
-		/*
-		 * On crash, we don't wait for secondaries to go
-		 * down as they might be unreachable or hung, so
-		 * instead we just wait a bit and move on.
-		 */
-		mdelay(1);
 	} else {
 		/* Primary waits for the secondaries to have reached OPAL */
 		pnv_kexec_wait_secondaries_down();
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 56f274064..b27f40f26 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -1,6 +1,6 @@
 config PPC_PS3
 	bool "Sony PS3"
-	depends on PPC64 && PPC_BOOK3S
+	depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
 	select PPC_CELL
 	select USB_OHCI_LITTLE_ENDIAN
 	select USB_OHCI_BIG_ENDIAN_MMIO
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 54c87d5d3..bec90fb30 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -4,6 +4,7 @@ config PPC_PSERIES
 	select HAVE_PCSPKR_PLATFORM
 	select MPIC
 	select OF_DYNAMIC
+	select PCI
 	select PCI_MSI
 	select PPC_XICS
 	select PPC_ICP_NATIVE
@@ -15,7 +16,6 @@ config PPC_PSERIES
 	select RTAS_ERROR_LOGGING
 	select PPC_UDBG_16550
 	select PPC_NATIVE
-	select PPC_PCI_CHOICE if EXPERT
 	select PPC_DOORBELL
 	select HAVE_CONTEXT_TRACKING
 	select HOTPLUG_CPU if SMP
@@ -43,11 +43,6 @@ config DTL
 
 	  Say N if you are unsure.
 
-config PSERIES_MSI
-       bool
-       depends on PCI_MSI && PPC_PSERIES && EEH
-       default y
-
 config PSERIES_ENERGY
 	tristate "pSeries energy management capabilities driver"
 	depends on PPC_PSERIES
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 03480796a..fedc2ccf0 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -2,14 +2,13 @@ ccflags-$(CONFIG_PPC64)			:= $(NO_MINIMAL_TOC)
 ccflags-$(CONFIG_PPC_PSERIES_DEBUG)	+= -DDEBUG
 
 obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
+			   of_helpers.o \
 			   setup.o iommu.o event_sources.o ras.o \
-			   firmware.o power.o dlpar.o mobility.o rng.o
+			   firmware.o power.o dlpar.o mobility.o rng.o \
+			   pci.o pci_dlpar.o eeh_pseries.o msi.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_SCANLOG)	+= scanlog.o
-obj-$(CONFIG_EEH)	+= eeh_pseries.o
 obj-$(CONFIG_KEXEC)	+= kexec.o
-obj-$(CONFIG_PCI)	+= pci.o pci_dlpar.o
-obj-$(CONFIG_PSERIES_MSI)	+= msi.o
 obj-$(CONFIG_PSERIES_ENERGY)	+= pseries_energy.o
 
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug-cpu.o
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index db17827eb..f244dcb4f 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -18,6 +18,8 @@
 #include <linux/cpu.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+
+#include "of_helpers.h"
 #include "offline_states.h"
 #include "pseries.h"
 
@@ -244,36 +246,13 @@ cc_error:
 	return first_dn;
 }
 
-static struct device_node *derive_parent(const char *path)
-{
-	struct device_node *parent;
-	char *last_slash;
-
-	last_slash = strrchr(path, '/');
-	if (last_slash == path) {
-		parent = of_find_node_by_path("/");
-	} else {
-		char *parent_path;
-		int parent_path_len = last_slash - path + 1;
-		parent_path = kmalloc(parent_path_len, GFP_KERNEL);
-		if (!parent_path)
-			return NULL;
-
-		strlcpy(parent_path, path, parent_path_len);
-		parent = of_find_node_by_path(parent_path);
-		kfree(parent_path);
-	}
-
-	return parent;
-}
-
 int dlpar_attach_node(struct device_node *dn)
 {
 	int rc;
 
-	dn->parent = derive_parent(dn->full_name);
-	if (!dn->parent)
-		return -ENOMEM;
+	dn->parent = pseries_of_derive_parent(dn->full_name);
+	if (IS_ERR(dn->parent))
+		return PTR_ERR(dn->parent);
 
 	rc = of_attach_node(dn);
 	if (rc) {
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 1ba55d0bb..ac3ffd97e 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -433,42 +433,34 @@ static int pseries_eeh_get_state(struct eeh_pe *pe, int *state)
 		return ret;
 
 	/* Parse the result out */
-	result = 0;
-	if (rets[1]) {
-		switch(rets[0]) {
-		case 0:
-			result &= ~EEH_STATE_RESET_ACTIVE;
-			result |= EEH_STATE_MMIO_ACTIVE;
-			result |= EEH_STATE_DMA_ACTIVE;
-			break;
-		case 1:
-			result |= EEH_STATE_RESET_ACTIVE;
-			result |= EEH_STATE_MMIO_ACTIVE;
-			result |= EEH_STATE_DMA_ACTIVE;
-			break;
-		case 2:
-			result &= ~EEH_STATE_RESET_ACTIVE;
-			result &= ~EEH_STATE_MMIO_ACTIVE;
-			result &= ~EEH_STATE_DMA_ACTIVE;
-			break;
-		case 4:
-			result &= ~EEH_STATE_RESET_ACTIVE;
-			result &= ~EEH_STATE_MMIO_ACTIVE;
-			result &= ~EEH_STATE_DMA_ACTIVE;
-			result |= EEH_STATE_MMIO_ENABLED;
-			break;
-		case 5:
-			if (rets[2]) {
-				if (state) *state = rets[2];
-				result = EEH_STATE_UNAVAILABLE;
-			} else {
-				result = EEH_STATE_NOT_SUPPORT;
-			}
-			break;
-		default:
+	if (!rets[1])
+		return EEH_STATE_NOT_SUPPORT;
+
+	switch(rets[0]) {
+	case 0:
+		result = EEH_STATE_MMIO_ACTIVE |
+			 EEH_STATE_DMA_ACTIVE;
+		break;
+	case 1:
+		result = EEH_STATE_RESET_ACTIVE |
+			 EEH_STATE_MMIO_ACTIVE  |
+			 EEH_STATE_DMA_ACTIVE;
+		break;
+	case 2:
+		result = 0;
+		break;
+	case 4:
+		result = EEH_STATE_MMIO_ENABLED;
+		break;
+	case 5:
+		if (rets[2]) {
+			if (state) *state = rets[2];
+			result = EEH_STATE_UNAVAILABLE;
+		} else {
 			result = EEH_STATE_NOT_SUPPORT;
 		}
-	} else {
+		break;
+	default:
 		result = EEH_STATE_NOT_SUPPORT;
 	}
 
diff --git a/arch/powerpc/platforms/pseries/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c
index eedb64594..94a6e5612 100644
--- a/arch/powerpc/platforms/pseries/hvcserver.c
+++ b/arch/powerpc/platforms/pseries/hvcserver.c
@@ -142,11 +142,11 @@ int hvcs_get_partner_info(uint32_t unit_address, struct list_head *head,
 	int more = 1;
 	int retval;
 
-	memset(pi_buff, 0x00, PAGE_SIZE);
 	/* invalid parameters */
 	if (!head || !pi_buff)
 		return -EINVAL;
 
+	memset(pi_buff, 0x00, PAGE_SIZE);
 	last_p_partition_ID = last_p_unit_address = ~0UL;
 	INIT_LIST_HEAD(head);
 
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 0946b98d7..bd98ce2be 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -532,7 +532,6 @@ static int tce_setrange_multi_pSeriesLP_walk(unsigned long start_pfn,
 	return tce_setrange_multi_pSeriesLP(start_pfn, num_pfn, arg);
 }
 
-#ifdef CONFIG_PCI
 static void iommu_table_setparms(struct pci_controller *phb,
 				 struct device_node *dn,
 				 struct iommu_table *tbl)
@@ -1292,15 +1291,6 @@ static u64 dma_get_required_mask_pSeriesLP(struct device *dev)
 	return dma_iommu_ops.get_required_mask(dev);
 }
 
-#else  /* CONFIG_PCI */
-#define pci_dma_bus_setup_pSeries	NULL
-#define pci_dma_dev_setup_pSeries	NULL
-#define pci_dma_bus_setup_pSeriesLP	NULL
-#define pci_dma_dev_setup_pSeriesLP	NULL
-#define dma_set_mask_pSeriesLP		NULL
-#define dma_get_required_mask_pSeriesLP	NULL
-#endif /* !CONFIG_PCI */
-
 static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action,
 		void *data)
 {
diff --git a/arch/powerpc/platforms/pseries/of_helpers.c b/arch/powerpc/platforms/pseries/of_helpers.c
new file mode 100644
index 000000000..2798933c0
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/of_helpers.c
@@ -0,0 +1,38 @@
+#include <linux/string.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include "of_helpers.h"
+
+/**
+ * pseries_of_derive_parent - basically like dirname(1)
+ * @path:  the full_name of a node to be added to the tree
+ *
+ * Returns the node which should be the parent of the node
+ * described by path.  E.g., for path = "/foo/bar", returns
+ * the node with full_name = "/foo".
+ */
+struct device_node *pseries_of_derive_parent(const char *path)
+{
+	struct device_node *parent;
+	char *parent_path = "/";
+	const char *tail;
+
+	/* We do not want the trailing '/' character */
+	tail = kbasename(path) - 1;
+
+	/* reject if path is "/" */
+	if (!strcmp(path, "/"))
+		return ERR_PTR(-EINVAL);
+
+	if (tail > path) {
+		parent_path = kstrndup(path, tail - path, GFP_KERNEL);
+		if (!parent_path)
+			return ERR_PTR(-ENOMEM);
+	}
+	parent = of_find_node_by_path(parent_path);
+	if (strcmp(parent_path, "/"))
+		kfree(parent_path);
+	return parent ? parent : ERR_PTR(-EINVAL);
+}
diff --git a/arch/powerpc/platforms/pseries/of_helpers.h b/arch/powerpc/platforms/pseries/of_helpers.h
new file mode 100644
index 000000000..bb83d39ae
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/of_helpers.h
@@ -0,0 +1,8 @@
+#ifndef _PSERIES_OF_HELPERS_H
+#define _PSERIES_OF_HELPERS_H
+
+#include <linux/of.h>
+
+struct device_node *pseries_of_derive_parent(const char *path);
+
+#endif /* _PSERIES_OF_HELPERS_H */
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 0f319521e..7c7fcc042 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -22,37 +22,7 @@
 #include <asm/uaccess.h>
 #include <asm/mmu.h>
 
-/**
- *	derive_parent - basically like dirname(1)
- *	@path:  the full_name of a node to be added to the tree
- *
- *	Returns the node which should be the parent of the node
- *	described by path.  E.g., for path = "/foo/bar", returns
- *	the node with full_name = "/foo".
- */
-static struct device_node *derive_parent(const char *path)
-{
-	struct device_node *parent = NULL;
-	char *parent_path = "/";
-	size_t parent_path_len = strrchr(path, '/') - path + 1;
-
-	/* reject if path is "/" */
-	if (!strcmp(path, "/"))
-		return ERR_PTR(-EINVAL);
-
-	if (strrchr(path, '/') != path) {
-		parent_path = kmalloc(parent_path_len, GFP_KERNEL);
-		if (!parent_path)
-			return ERR_PTR(-ENOMEM);
-		strlcpy(parent_path, path, parent_path_len);
-	}
-	parent = of_find_node_by_path(parent_path);
-	if (!parent)
-		return ERR_PTR(-EINVAL);
-	if (strcmp(parent_path, "/"))
-		kfree(parent_path);
-	return parent;
-}
+#include "of_helpers.h"
 
 static int pSeries_reconfig_add_node(const char *path, struct property *proplist)
 {
@@ -71,7 +41,7 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist
 	of_node_set_flag(np, OF_DYNAMIC);
 	of_node_init(np);
 
-	np->parent = derive_parent(path);
+	np->parent = pseries_of_derive_parent(path);
 	if (IS_ERR(np->parent)) {
 		err = PTR_ERR(np->parent);
 		goto out_err;
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 9a83eb71b..36df46eab 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -40,6 +40,7 @@
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/of.h>
+#include <linux/of_pci.h>
 #include <linux/kexec.h>
 
 #include <asm/mmu.h>
@@ -495,18 +496,7 @@ static void __init find_and_init_phbs(void)
 	 * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
 	 * in chosen.
 	 */
-	if (of_chosen) {
-		const int *prop;
-
-		prop = of_get_property(of_chosen,
-				"linux,pci-probe-only", NULL);
-		if (prop) {
-			if (*prop)
-				pci_add_flags(PCI_PROBE_ONLY);
-			else
-				pci_clear_flags(PCI_PROBE_ONLY);
-		}
-	}
+	of_pci_check_probe_only();
 }
 
 static void __init pSeries_setup_arch(void)
@@ -837,10 +827,6 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus)
 	return PCI_PROBE_NORMAL;
 }
 
-#ifndef CONFIG_PCI
-void pSeries_final_fixup(void) { }
-#endif
-
 struct pci_controller_ops pseries_pci_controller_ops = {
 	.probe_mode		= pSeries_pci_probe_mode,
 };