diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-03-25 03:53:42 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-03-25 03:53:42 -0300 |
commit | 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 (patch) | |
tree | fa581f6dc1c0596391690d1f67eceef3af8246dc /arch/powerpc/sysdev/qe_lib/qe.c | |
parent | d4e493caf788ef44982e131ff9c786546904d934 (diff) |
Linux-libre 4.5-gnu
Diffstat (limited to 'arch/powerpc/sysdev/qe_lib/qe.c')
-rw-r--r-- | arch/powerpc/sysdev/qe_lib/qe.c | 706 |
1 files changed, 0 insertions, 706 deletions
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c deleted file mode 100644 index c2518cdb7..000000000 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ /dev/null @@ -1,706 +0,0 @@ -/* - * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish <gridish@freescale.com> - * Li Yang <leoli@freescale.com> - * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net) - * - * Description: - * General Purpose functions for the global management of the - * QUICC Engine (QE). - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/spinlock.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/crc32.h> -#include <linux/mod_devicetable.h> -#include <linux/of_platform.h> -#include <asm/irq.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/immap_qe.h> -#include <asm/qe.h> -#include <asm/prom.h> -#include <asm/rheap.h> - -static void qe_snums_init(void); -static int qe_sdma_init(void); - -static DEFINE_SPINLOCK(qe_lock); -DEFINE_SPINLOCK(cmxgcr_lock); -EXPORT_SYMBOL(cmxgcr_lock); - -/* QE snum state */ -enum qe_snum_state { - QE_SNUM_STATE_USED, - QE_SNUM_STATE_FREE -}; - -/* QE snum */ -struct qe_snum { - u8 num; - enum qe_snum_state state; -}; - -/* We allocate this here because it is used almost exclusively for - * the communication processor devices. - */ -struct qe_immap __iomem *qe_immr; -EXPORT_SYMBOL(qe_immr); - -static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */ -static unsigned int qe_num_of_snum; - -static phys_addr_t qebase = -1; - -phys_addr_t get_qe_base(void) -{ - struct device_node *qe; - int size; - const u32 *prop; - - if (qebase != -1) - return qebase; - - qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!qe) { - qe = of_find_node_by_type(NULL, "qe"); - if (!qe) - return qebase; - } - - prop = of_get_property(qe, "reg", &size); - if (prop && size >= sizeof(*prop)) - qebase = of_translate_address(qe, prop); - of_node_put(qe); - - return qebase; -} - -EXPORT_SYMBOL(get_qe_base); - -void qe_reset(void) -{ - if (qe_immr == NULL) - qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE); - - qe_snums_init(); - - qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, - QE_CR_PROTOCOL_UNSPECIFIED, 0); - - /* Reclaim the MURAM memory for our use. */ - qe_muram_init(); - - if (qe_sdma_init()) - panic("sdma init failed!"); -} - -int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) -{ - unsigned long flags; - u8 mcn_shift = 0, dev_shift = 0; - u32 ret; - - spin_lock_irqsave(&qe_lock, flags); - if (cmd == QE_RESET) { - out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG)); - } else { - if (cmd == QE_ASSIGN_PAGE) { - /* Here device is the SNUM, not sub-block */ - dev_shift = QE_CR_SNUM_SHIFT; - } else if (cmd == QE_ASSIGN_RISC) { - /* Here device is the SNUM, and mcnProtocol is - * e_QeCmdRiscAssignment value */ - dev_shift = QE_CR_SNUM_SHIFT; - mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT; - } else { - if (device == QE_CR_SUBBLOCK_USB) - mcn_shift = QE_CR_MCN_USB_SHIFT; - else - mcn_shift = QE_CR_MCN_NORMAL_SHIFT; - } - - out_be32(&qe_immr->cp.cecdr, cmd_input); - out_be32(&qe_immr->cp.cecr, - (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32) - mcn_protocol << mcn_shift)); - } - - /* wait for the QE_CR_FLG to clear */ - ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0, - 100, 0); - /* On timeout (e.g. failure), the expression will be false (ret == 0), - otherwise it will be true (ret == 1). */ - spin_unlock_irqrestore(&qe_lock, flags); - - return ret == 1; -} -EXPORT_SYMBOL(qe_issue_cmd); - -/* Set a baud rate generator. This needs lots of work. There are - * 16 BRGs, which can be connected to the QE channels or output - * as clocks. The BRGs are in two different block of internal - * memory mapped space. - * The BRG clock is the QE clock divided by 2. - * It was set up long ago during the initial boot phase and is - * is given to us. - * Baud rate clocks are zero-based in the driver code (as that maps - * to port numbers). Documentation uses 1-based numbering. - */ -static unsigned int brg_clk = 0; - -unsigned int qe_get_brg_clk(void) -{ - struct device_node *qe; - int size; - const u32 *prop; - - if (brg_clk) - return brg_clk; - - qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!qe) { - qe = of_find_node_by_type(NULL, "qe"); - if (!qe) - return brg_clk; - } - - prop = of_get_property(qe, "brg-frequency", &size); - if (prop && size == sizeof(*prop)) - brg_clk = *prop; - - of_node_put(qe); - - return brg_clk; -} -EXPORT_SYMBOL(qe_get_brg_clk); - -/* Program the BRG to the given sampling rate and multiplier - * - * @brg: the BRG, QE_BRG1 - QE_BRG16 - * @rate: the desired sampling rate - * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or - * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01, - * then 'multiplier' should be 8. - */ -int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) -{ - u32 divisor, tempval; - u32 div16 = 0; - - if ((brg < QE_BRG1) || (brg > QE_BRG16)) - return -EINVAL; - - divisor = qe_get_brg_clk() / (rate * multiplier); - - if (divisor > QE_BRGC_DIVISOR_MAX + 1) { - div16 = QE_BRGC_DIV16; - divisor /= 16; - } - - /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says - that the BRG divisor must be even if you're not using divide-by-16 - mode. */ - if (!div16 && (divisor & 1) && (divisor > 3)) - divisor++; - - tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | - QE_BRGC_ENABLE | div16; - - out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval); - - return 0; -} -EXPORT_SYMBOL(qe_setbrg); - -/* Convert a string to a QE clock source enum - * - * This function takes a string, typically from a property in the device - * tree, and returns the corresponding "enum qe_clock" value. -*/ -enum qe_clock qe_clock_source(const char *source) -{ - unsigned int i; - - if (strcasecmp(source, "none") == 0) - return QE_CLK_NONE; - - if (strncasecmp(source, "brg", 3) == 0) { - i = simple_strtoul(source + 3, NULL, 10); - if ((i >= 1) && (i <= 16)) - return (QE_BRG1 - 1) + i; - else - return QE_CLK_DUMMY; - } - - if (strncasecmp(source, "clk", 3) == 0) { - i = simple_strtoul(source + 3, NULL, 10); - if ((i >= 1) && (i <= 24)) - return (QE_CLK1 - 1) + i; - else - return QE_CLK_DUMMY; - } - - return QE_CLK_DUMMY; -} -EXPORT_SYMBOL(qe_clock_source); - -/* Initialize SNUMs (thread serial numbers) according to - * QE Module Control chapter, SNUM table - */ -static void qe_snums_init(void) -{ - int i; - static const u8 snum_init_76[] = { - 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, - 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, - 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, - 0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D, - 0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D, - 0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D, - 0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD, - 0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD, - 0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED, - 0xF4, 0xF5, 0xFC, 0xFD, - }; - static const u8 snum_init_46[] = { - 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, - 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, - 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, - 0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19, - 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59, - 0x68, 0x69, 0x78, 0x79, 0x80, 0x81, - }; - static const u8 *snum_init; - - qe_num_of_snum = qe_get_num_of_snums(); - - if (qe_num_of_snum == 76) - snum_init = snum_init_76; - else - snum_init = snum_init_46; - - for (i = 0; i < qe_num_of_snum; i++) { - snums[i].num = snum_init[i]; - snums[i].state = QE_SNUM_STATE_FREE; - } -} - -int qe_get_snum(void) -{ - unsigned long flags; - int snum = -EBUSY; - int i; - - spin_lock_irqsave(&qe_lock, flags); - for (i = 0; i < qe_num_of_snum; i++) { - if (snums[i].state == QE_SNUM_STATE_FREE) { - snums[i].state = QE_SNUM_STATE_USED; - snum = snums[i].num; - break; - } - } - spin_unlock_irqrestore(&qe_lock, flags); - - return snum; -} -EXPORT_SYMBOL(qe_get_snum); - -void qe_put_snum(u8 snum) -{ - int i; - - for (i = 0; i < qe_num_of_snum; i++) { - if (snums[i].num == snum) { - snums[i].state = QE_SNUM_STATE_FREE; - break; - } - } -} -EXPORT_SYMBOL(qe_put_snum); - -static int qe_sdma_init(void) -{ - struct sdma __iomem *sdma = &qe_immr->sdma; - static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM; - - if (!sdma) - return -ENODEV; - - /* allocate 2 internal temporary buffers (512 bytes size each) for - * the SDMA */ - if (IS_ERR_VALUE(sdma_buf_offset)) { - sdma_buf_offset = qe_muram_alloc(512 * 2, 4096); - if (IS_ERR_VALUE(sdma_buf_offset)) - return -ENOMEM; - } - - out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK); - out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | - (0x1 << QE_SDMR_CEN_SHIFT))); - - return 0; -} - -/* The maximum number of RISCs we support */ -#define MAX_QE_RISC 4 - -/* Firmware information stored here for qe_get_firmware_info() */ -static struct qe_firmware_info qe_firmware_info; - -/* - * Set to 1 if QE firmware has been uploaded, and therefore - * qe_firmware_info contains valid data. - */ -static int qe_firmware_uploaded; - -/* - * Upload a QE microcode - * - * This function is a worker function for qe_upload_firmware(). It does - * the actual uploading of the microcode. - */ -static void qe_upload_microcode(const void *base, - const struct qe_microcode *ucode) -{ - const __be32 *code = base + be32_to_cpu(ucode->code_offset); - unsigned int i; - - if (ucode->major || ucode->minor || ucode->revision) - printk(KERN_INFO "qe-firmware: " - "uploading microcode '%s' version %u.%u.%u\n", - ucode->id, ucode->major, ucode->minor, ucode->revision); - else - printk(KERN_INFO "qe-firmware: " - "uploading microcode '%s'\n", ucode->id); - - /* Use auto-increment */ - out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) | - QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR); - - for (i = 0; i < be32_to_cpu(ucode->count); i++) - out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i])); - - /* Set I-RAM Ready Register */ - out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY)); -} - -/* - * Upload a microcode to the I-RAM at a specific address. - * - * See Documentation/powerpc/qe_firmware.txt for information on QE microcode - * uploading. - * - * Currently, only version 1 is supported, so the 'version' field must be - * set to 1. - * - * The SOC model and revision are not validated, they are only displayed for - * informational purposes. - * - * 'calc_size' is the calculated size, in bytes, of the firmware structure and - * all of the microcode structures, minus the CRC. - * - * 'length' is the size that the structure says it is, including the CRC. - */ -int qe_upload_firmware(const struct qe_firmware *firmware) -{ - unsigned int i; - unsigned int j; - u32 crc; - size_t calc_size = sizeof(struct qe_firmware); - size_t length; - const struct qe_header *hdr; - - if (!firmware) { - printk(KERN_ERR "qe-firmware: invalid pointer\n"); - return -EINVAL; - } - - hdr = &firmware->header; - length = be32_to_cpu(hdr->length); - - /* Check the magic */ - if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || - (hdr->magic[2] != 'F')) { - printk(KERN_ERR "qe-firmware: not a microcode\n"); - return -EPERM; - } - - /* Check the version */ - if (hdr->version != 1) { - printk(KERN_ERR "qe-firmware: unsupported version\n"); - return -EPERM; - } - - /* Validate some of the fields */ - if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) { - printk(KERN_ERR "qe-firmware: invalid data\n"); - return -EINVAL; - } - - /* Validate the length and check if there's a CRC */ - calc_size += (firmware->count - 1) * sizeof(struct qe_microcode); - - for (i = 0; i < firmware->count; i++) - /* - * For situations where the second RISC uses the same microcode - * as the first, the 'code_offset' and 'count' fields will be - * zero, so it's okay to add those. - */ - calc_size += sizeof(__be32) * - be32_to_cpu(firmware->microcode[i].count); - - /* Validate the length */ - if (length != calc_size + sizeof(__be32)) { - printk(KERN_ERR "qe-firmware: invalid length\n"); - return -EPERM; - } - - /* Validate the CRC */ - crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size)); - if (crc != crc32(0, firmware, calc_size)) { - printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n"); - return -EIO; - } - - /* - * If the microcode calls for it, split the I-RAM. - */ - if (!firmware->split) - setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR); - - if (firmware->soc.model) - printk(KERN_INFO - "qe-firmware: firmware '%s' for %u V%u.%u\n", - firmware->id, be16_to_cpu(firmware->soc.model), - firmware->soc.major, firmware->soc.minor); - else - printk(KERN_INFO "qe-firmware: firmware '%s'\n", - firmware->id); - - /* - * The QE only supports one microcode per RISC, so clear out all the - * saved microcode information and put in the new. - */ - memset(&qe_firmware_info, 0, sizeof(qe_firmware_info)); - strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id)); - qe_firmware_info.extended_modes = firmware->extended_modes; - memcpy(qe_firmware_info.vtraps, firmware->vtraps, - sizeof(firmware->vtraps)); - - /* Loop through each microcode. */ - for (i = 0; i < firmware->count; i++) { - const struct qe_microcode *ucode = &firmware->microcode[i]; - - /* Upload a microcode if it's present */ - if (ucode->code_offset) - qe_upload_microcode(firmware, ucode); - - /* Program the traps for this processor */ - for (j = 0; j < 16; j++) { - u32 trap = be32_to_cpu(ucode->traps[j]); - - if (trap) - out_be32(&qe_immr->rsp[i].tibcr[j], trap); - } - - /* Enable traps */ - out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr)); - } - - qe_firmware_uploaded = 1; - - return 0; -} -EXPORT_SYMBOL(qe_upload_firmware); - -/* - * Get info on the currently-loaded firmware - * - * This function also checks the device tree to see if the boot loader has - * uploaded a firmware already. - */ -struct qe_firmware_info *qe_get_firmware_info(void) -{ - static int initialized; - struct property *prop; - struct device_node *qe; - struct device_node *fw = NULL; - const char *sprop; - unsigned int i; - - /* - * If we haven't checked yet, and a driver hasn't uploaded a firmware - * yet, then check the device tree for information. - */ - if (qe_firmware_uploaded) - return &qe_firmware_info; - - if (initialized) - return NULL; - - initialized = 1; - - /* - * Newer device trees have an "fsl,qe" compatible property for the QE - * node, but we still need to support older device trees. - */ - qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!qe) { - qe = of_find_node_by_type(NULL, "qe"); - if (!qe) - return NULL; - } - - /* Find the 'firmware' child node */ - for_each_child_of_node(qe, fw) { - if (strcmp(fw->name, "firmware") == 0) - break; - } - - of_node_put(qe); - - /* Did we find the 'firmware' node? */ - if (!fw) - return NULL; - - qe_firmware_uploaded = 1; - - /* Copy the data into qe_firmware_info*/ - sprop = of_get_property(fw, "id", NULL); - if (sprop) - strlcpy(qe_firmware_info.id, sprop, - sizeof(qe_firmware_info.id)); - - prop = of_find_property(fw, "extended-modes", NULL); - if (prop && (prop->length == sizeof(u64))) { - const u64 *iprop = prop->value; - - qe_firmware_info.extended_modes = *iprop; - } - - prop = of_find_property(fw, "virtual-traps", NULL); - if (prop && (prop->length == 32)) { - const u32 *iprop = prop->value; - - for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++) - qe_firmware_info.vtraps[i] = iprop[i]; - } - - of_node_put(fw); - - return &qe_firmware_info; -} -EXPORT_SYMBOL(qe_get_firmware_info); - -unsigned int qe_get_num_of_risc(void) -{ - struct device_node *qe; - int size; - unsigned int num_of_risc = 0; - const u32 *prop; - - qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!qe) { - /* Older devices trees did not have an "fsl,qe" - * compatible property, so we need to look for - * the QE node by name. - */ - qe = of_find_node_by_type(NULL, "qe"); - if (!qe) - return num_of_risc; - } - - prop = of_get_property(qe, "fsl,qe-num-riscs", &size); - if (prop && size == sizeof(*prop)) - num_of_risc = *prop; - - of_node_put(qe); - - return num_of_risc; -} -EXPORT_SYMBOL(qe_get_num_of_risc); - -unsigned int qe_get_num_of_snums(void) -{ - struct device_node *qe; - int size; - unsigned int num_of_snums; - const u32 *prop; - - num_of_snums = 28; /* The default number of snum for threads is 28 */ - qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!qe) { - /* Older devices trees did not have an "fsl,qe" - * compatible property, so we need to look for - * the QE node by name. - */ - qe = of_find_node_by_type(NULL, "qe"); - if (!qe) - return num_of_snums; - } - - prop = of_get_property(qe, "fsl,qe-num-snums", &size); - if (prop && size == sizeof(*prop)) { - num_of_snums = *prop; - if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) { - /* No QE ever has fewer than 28 SNUMs */ - pr_err("QE: number of snum is invalid\n"); - of_node_put(qe); - return -EINVAL; - } - } - - of_node_put(qe); - - return num_of_snums; -} -EXPORT_SYMBOL(qe_get_num_of_snums); - -#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) -static int qe_resume(struct platform_device *ofdev) -{ - if (!qe_alive_during_sleep()) - qe_reset(); - return 0; -} - -static int qe_probe(struct platform_device *ofdev) -{ - return 0; -} - -static const struct of_device_id qe_ids[] = { - { .compatible = "fsl,qe", }, - { }, -}; - -static struct platform_driver qe_driver = { - .driver = { - .name = "fsl-qe", - .of_match_table = qe_ids, - }, - .probe = qe_probe, - .resume = qe_resume, -}; - -static int __init qe_drv_init(void) -{ - return platform_driver_register(&qe_driver); -} -device_initcall(qe_drv_init); -#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */ |