Initial import

4 files changed, 574 insertions, 0 deletions

diff --git a/arch/sh/boards/mach-x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
new file mode 100644
index 000000000..0cbe3d02d
--- /dev/null
+++ b/arch/sh/boards/mach-x3proto/Makefile
@@ -0,0 +1,3 @@
+obj-y += setup.o ilsel.o
+
+obj-$(CONFIG_GPIOLIB)		+= gpio.o
diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c
new file mode 100644
index 000000000..f035a7ac6
--- /dev/null
+++ b/arch/sh/boards/mach-x3proto/gpio.c
@@ -0,0 +1,139 @@
+/*
+ * arch/sh/boards/mach-x3proto/gpio.c
+ *
+ * Renesas SH-X3 Prototype Baseboard GPIO Support.
+ *
+ * Copyright (C) 2010 - 2012  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <mach/ilsel.h>
+#include <mach/hardware.h>
+
+#define KEYCTLR	0xb81c0000
+#define KEYOUTR	0xb81c0002
+#define KEYDETR 0xb81c0004
+
+static DEFINE_SPINLOCK(x3proto_gpio_lock);
+static struct irq_domain *x3proto_irq_domain;
+
+static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	unsigned long flags;
+	unsigned int data;
+
+	spin_lock_irqsave(&x3proto_gpio_lock, flags);
+	data = __raw_readw(KEYCTLR);
+	data |= (1 << gpio);
+	__raw_writew(data, KEYCTLR);
+	spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
+
+	return 0;
+}
+
+static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!(__raw_readw(KEYDETR) & (1 << gpio));
+}
+
+static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	int virq;
+
+	if (gpio < chip->ngpio)
+		virq = irq_create_mapping(x3proto_irq_domain, gpio);
+	else
+		virq = -ENXIO;
+
+	return virq;
+}
+
+static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int pin;
+
+	chip->irq_mask_ack(data);
+
+	mask = __raw_readw(KEYDETR);
+	for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS)
+		generic_handle_irq(irq_linear_revmap(x3proto_irq_domain, pin));
+
+	chip->irq_unmask(data);
+}
+
+struct gpio_chip x3proto_gpio_chip = {
+	.label			= "x3proto-gpio",
+	.direction_input	= x3proto_gpio_direction_input,
+	.get			= x3proto_gpio_get,
+	.to_irq			= x3proto_gpio_to_irq,
+	.base			= -1,
+	.ngpio			= NR_BASEBOARD_GPIOS,
+};
+
+static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq,
+				irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq,
+				      "gpio");
+
+	return 0;
+}
+
+static struct irq_domain_ops x3proto_gpio_irq_ops = {
+	.map	= x3proto_gpio_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+int __init x3proto_gpio_setup(void)
+{
+	int ilsel, ret;
+
+	ilsel = ilsel_enable(ILSEL_KEY);
+	if (unlikely(ilsel < 0))
+		return ilsel;
+
+	ret = gpiochip_add(&x3proto_gpio_chip);
+	if (unlikely(ret))
+		goto err_gpio;
+
+	x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS,
+						   &x3proto_gpio_irq_ops, NULL);
+	if (unlikely(!x3proto_irq_domain))
+		goto err_irq;
+
+	pr_info("registering '%s' support, handling GPIOs %u -> %u, "
+		"bound to IRQ %u\n",
+		x3proto_gpio_chip.label, x3proto_gpio_chip.base,
+		x3proto_gpio_chip.base + x3proto_gpio_chip.ngpio,
+		ilsel);
+
+	irq_set_chained_handler(ilsel, x3proto_gpio_irq_handler);
+	irq_set_irq_wake(ilsel, 1);
+
+	return 0;
+
+err_irq:
+	gpiochip_remove(&x3proto_gpio_chip);
+	ret = 0;
+err_gpio:
+	synchronize_irq(ilsel);
+
+	ilsel_disable(ILSEL_KEY);
+
+	return ret;
+}
diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
new file mode 100644
index 000000000..95e346139
--- /dev/null
+++ b/arch/sh/boards/mach-x3proto/ilsel.c
@@ -0,0 +1,159 @@
+/*
+ * arch/sh/boards/mach-x3proto/ilsel.c
+ *
+ * Helper routines for SH-X3 proto board ILSEL.
+ *
+ * Copyright (C) 2007 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/bitmap.h>
+#include <linux/io.h>
+#include <mach/ilsel.h>
+
+/*
+ * ILSEL is split across:
+ *
+ *	ILSEL0 - 0xb8100004 [ Levels  1 -  4 ]
+ *	ILSEL1 - 0xb8100006 [ Levels  5 -  8 ]
+ *	ILSEL2 - 0xb8100008 [ Levels  9 - 12 ]
+ *	ILSEL3 - 0xb810000a [ Levels 13 - 15 ]
+ *
+ * With each level being relative to an ilsel_source_t.
+ */
+#define ILSEL_BASE	0xb8100004
+#define ILSEL_LEVELS	15
+
+/*
+ * ILSEL level map, in descending order from the highest level down.
+ *
+ * Supported levels are 1 - 15 spread across ILSEL0 - ILSEL4, mapping
+ * directly to IRLs. As the IRQs are numbered in reverse order relative
+ * to the interrupt level, the level map is carefully managed to ensure a
+ * 1:1 mapping between the bit position and the IRQ number.
+ *
+ * This careful constructions allows ilsel_enable*() to be referenced
+ * directly for hooking up an ILSEL set and getting back an IRQ which can
+ * subsequently be used for internal accounting in the (optional) disable
+ * path.
+ */
+static unsigned long ilsel_level_map;
+
+static inline unsigned int ilsel_offset(unsigned int bit)
+{
+	return ILSEL_LEVELS - bit - 1;
+}
+
+static inline unsigned long mk_ilsel_addr(unsigned int bit)
+{
+	return ILSEL_BASE + ((ilsel_offset(bit) >> 1) & ~0x1);
+}
+
+static inline unsigned int mk_ilsel_shift(unsigned int bit)
+{
+	return (ilsel_offset(bit) & 0x3) << 2;
+}
+
+static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
+{
+	unsigned int tmp, shift;
+	unsigned long addr;
+
+	pr_notice("enabling ILSEL set %d\n", set);
+
+	addr = mk_ilsel_addr(bit);
+	shift = mk_ilsel_shift(bit);
+
+	pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
+		 __func__, bit, addr, shift, set);
+
+	tmp = __raw_readw(addr);
+	tmp &= ~(0xf << shift);
+	tmp |= set << shift;
+	__raw_writew(tmp, addr);
+}
+
+/**
+ * ilsel_enable - Enable an ILSEL set.
+ * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
+ *
+ * Enables a given non-aliased ILSEL source (<= ILSEL_KEY) at the highest
+ * available interrupt level. Callers should take care to order callsites
+ * noting descending interrupt levels. Aliasing FPGA and external board
+ * IRQs need to use ilsel_enable_fixed().
+ *
+ * The return value is an IRQ number that can later be taken down with
+ * ilsel_disable().
+ */
+int ilsel_enable(ilsel_source_t set)
+{
+	unsigned int bit;
+
+	if (unlikely(set > ILSEL_KEY)) {
+		pr_err("Aliased sources must use ilsel_enable_fixed()\n");
+		return -EINVAL;
+	}
+
+	do {
+		bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS);
+	} while (test_and_set_bit(bit, &ilsel_level_map));
+
+	__ilsel_enable(set, bit);
+
+	return bit;
+}
+EXPORT_SYMBOL_GPL(ilsel_enable);
+
+/**
+ * ilsel_enable_fixed - Enable an ILSEL set at a fixed interrupt level
+ * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
+ * @level: Interrupt level (1 - 15)
+ *
+ * Enables a given ILSEL source at a fixed interrupt level. Necessary
+ * both for level reservation as well as for aliased sources that only
+ * exist on special ILSEL#s.
+ *
+ * Returns an IRQ number (as ilsel_enable()).
+ */
+int ilsel_enable_fixed(ilsel_source_t set, unsigned int level)
+{
+	unsigned int bit = ilsel_offset(level - 1);
+
+	if (test_and_set_bit(bit, &ilsel_level_map))
+		return -EBUSY;
+
+	__ilsel_enable(set, bit);
+
+	return bit;
+}
+EXPORT_SYMBOL_GPL(ilsel_enable_fixed);
+
+/**
+ * ilsel_disable - Disable an ILSEL set
+ * @irq: Bit position for ILSEL set value (retval from enable routines)
+ *
+ * Disable a previously enabled ILSEL set.
+ */
+void ilsel_disable(unsigned int irq)
+{
+	unsigned long addr;
+	unsigned int tmp;
+
+	pr_notice("disabling ILSEL set %d\n", irq);
+
+	addr = mk_ilsel_addr(irq);
+
+	tmp = __raw_readw(addr);
+	tmp &= ~(0xf << mk_ilsel_shift(irq));
+	__raw_writew(tmp, addr);
+
+	clear_bit(irq, &ilsel_level_map);
+}
+EXPORT_SYMBOL_GPL(ilsel_disable);
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
new file mode 100644
index 000000000..d682e2b6a
--- /dev/null
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -0,0 +1,273 @@
+/*
+ * arch/sh/boards/mach-x3proto/setup.c
+ *
+ * Renesas SH-X3 Prototype Board Support.
+ *
+ * Copyright (C) 2007 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <mach/ilsel.h>
+#include <mach/hardware.h>
+#include <asm/smp-ops.h>
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xb8140020,
+		.end	= 0xb8140020,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start		= 0x18000300,
+		.end		= 0x18000300 + 0x10 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Filled in by ilsel */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.resource	= smc91x_resources,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.dev	= {
+		.platform_data = &smc91x_info,
+	},
+};
+
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.start	= 0x18040000,
+		.end	= 0x18080000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Filled in by ilsel */
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
+static struct resource m66592_usb_peripheral_resources[] = {
+	[0] = {
+		.name	= "m66592_udc",
+		.start	= 0x18080000,
+		.end	= 0x180c0000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "m66592_udc",
+		/* Filled in by ilsel */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m66592_usb_peripheral_device = {
+	.name		= "m66592_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
+	.resource	= m66592_usb_peripheral_resources,
+};
+
+static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = {
+	{
+		.desc		= "key44",
+		.code		= KEY_POWER,
+		.active_low	= 1,
+		.wakeup		= 1,
+	}, {
+		.desc		= "key43",
+		.code		= KEY_SUSPEND,
+		.active_low	= 1,
+		.wakeup		= 1,
+	}, {
+		.desc		= "key42",
+		.code		= KEY_KATAKANAHIRAGANA,
+		.active_low	= 1,
+	}, {
+		.desc		= "key41",
+		.code		= KEY_SWITCHVIDEOMODE,
+		.active_low	= 1,
+	}, {
+		.desc		= "key34",
+		.code		= KEY_F12,
+		.active_low	= 1,
+	}, {
+		.desc		= "key33",
+		.code		= KEY_F11,
+		.active_low	= 1,
+	}, {
+		.desc		= "key32",
+		.code		= KEY_F10,
+		.active_low	= 1,
+	}, {
+		.desc		= "key31",
+		.code		= KEY_F9,
+		.active_low	= 1,
+	}, {
+		.desc		= "key24",
+		.code		= KEY_F8,
+		.active_low	= 1,
+	}, {
+		.desc		= "key23",
+		.code		= KEY_F7,
+		.active_low	= 1,
+	}, {
+		.desc		= "key22",
+		.code		= KEY_F6,
+		.active_low	= 1,
+	}, {
+		.desc		= "key21",
+		.code		= KEY_F5,
+		.active_low	= 1,
+	}, {
+		.desc		= "key14",
+		.code		= KEY_F4,
+		.active_low	= 1,
+	}, {
+		.desc		= "key13",
+		.code		= KEY_F3,
+		.active_low	= 1,
+	}, {
+		.desc		= "key12",
+		.code		= KEY_F2,
+		.active_low	= 1,
+	}, {
+		.desc		= "key11",
+		.code		= KEY_F1,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data baseboard_buttons_data = {
+	.buttons	= baseboard_buttons,
+	.nbuttons	= ARRAY_SIZE(baseboard_buttons),
+};
+
+static struct platform_device baseboard_buttons_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &baseboard_buttons_data,
+	},
+};
+
+static struct platform_device *x3proto_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_device,
+	&r8a66597_usb_host_device,
+	&m66592_usb_peripheral_device,
+	&baseboard_buttons_device,
+};
+
+static void __init x3proto_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	/* Set ICR0.LVLMODE */
+	__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
+}
+
+static int __init x3proto_devices_setup(void)
+{
+	int ret, i;
+
+	/*
+	 * IRLs are only needed for ILSEL mappings, so flip over the INTC
+	 * pins at a later point to enable the GPIOs to settle.
+	 */
+	x3proto_init_irq();
+
+	/*
+	 * Now that ILSELs are available, set up the baseboard GPIOs.
+	 */
+	ret = x3proto_gpio_setup();
+	if (unlikely(ret))
+		return ret;
+
+	/*
+	 * Propagate dynamic GPIOs for the baseboard button device.
+	 */
+	for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++)
+		baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;
+
+	r8a66597_usb_host_resources[1].start =
+		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
+
+	m66592_usb_peripheral_resources[1].start =
+		m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
+
+	smc91x_resources[1].start =
+		smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
+
+	return platform_add_devices(x3proto_devices,
+				    ARRAY_SIZE(x3proto_devices));
+}
+device_initcall(x3proto_devices_setup);
+
+static void __init x3proto_setup(char **cmdline_p)
+{
+	register_smp_ops(&shx3_smp_ops);
+}
+
+static struct sh_machine_vector mv_x3proto __initmv = {
+	.mv_name		= "x3proto",
+	.mv_setup		= x3proto_setup,
+};