Initial import

1 files changed, 326 insertions, 0 deletions

diff --git a/arch/x86/kernel/mcount_64.S b/arch/x86/kernel/mcount_64.S
new file mode 100644
index 000000000..94ea120fa
--- /dev/null
+++ b/arch/x86/kernel/mcount_64.S
@@ -0,0 +1,326 @@
+/*
+ *  linux/arch/x86_64/mcount_64.S
+ *
+ *  Copyright (C) 2014  Steven Rostedt, Red Hat Inc
+ */
+
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/ftrace.h>
+
+
+	.code64
+	.section .entry.text, "ax"
+
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+#ifdef CC_USING_FENTRY
+# define function_hook	__fentry__
+#else
+# define function_hook	mcount
+#endif
+
+/* All cases save the original rbp (8 bytes) */
+#ifdef CONFIG_FRAME_POINTER
+# ifdef CC_USING_FENTRY
+/* Save parent and function stack frames (rip and rbp) */
+#  define MCOUNT_FRAME_SIZE	(8+16*2)
+# else
+/* Save just function stack frame (rip and rbp) */
+#  define MCOUNT_FRAME_SIZE	(8+16)
+# endif
+#else
+/* No need to save a stack frame */
+# define MCOUNT_FRAME_SIZE	8
+#endif /* CONFIG_FRAME_POINTER */
+
+/* Size of stack used to save mcount regs in save_mcount_regs */
+#define MCOUNT_REG_SIZE		(SS+8 + MCOUNT_FRAME_SIZE)
+
+/*
+ * gcc -pg option adds a call to 'mcount' in most functions.
+ * When -mfentry is used, the call is to 'fentry' and not 'mcount'
+ * and is done before the function's stack frame is set up.
+ * They both require a set of regs to be saved before calling
+ * any C code and restored before returning back to the function.
+ *
+ * On boot up, all these calls are converted into nops. When tracing
+ * is enabled, the call can jump to either ftrace_caller or
+ * ftrace_regs_caller. Callbacks (tracing functions) that require
+ * ftrace_regs_caller (like kprobes) need to have pt_regs passed to
+ * it. For this reason, the size of the pt_regs structure will be
+ * allocated on the stack and the required mcount registers will
+ * be saved in the locations that pt_regs has them in.
+ */
+
+/*
+ * @added: the amount of stack added before calling this
+ *
+ * After this is called, the following registers contain:
+ *
+ *  %rdi - holds the address that called the trampoline
+ *  %rsi - holds the parent function (traced function's return address)
+ *  %rdx - holds the original %rbp
+ */
+.macro save_mcount_regs added=0
+
+	/* Always save the original rbp */
+	pushq %rbp
+
+#ifdef CONFIG_FRAME_POINTER
+	/*
+	 * Stack traces will stop at the ftrace trampoline if the frame pointer
+	 * is not set up properly. If fentry is used, we need to save a frame
+	 * pointer for the parent as well as the function traced, because the
+	 * fentry is called before the stack frame is set up, where as mcount
+	 * is called afterward.
+	 */
+#ifdef CC_USING_FENTRY
+	/* Save the parent pointer (skip orig rbp and our return address) */
+	pushq \added+8*2(%rsp)
+	pushq %rbp
+	movq %rsp, %rbp
+	/* Save the return address (now skip orig rbp, rbp and parent) */
+	pushq \added+8*3(%rsp)
+#else
+	/* Can't assume that rip is before this (unless added was zero) */
+	pushq \added+8(%rsp)
+#endif
+	pushq %rbp
+	movq %rsp, %rbp
+#endif /* CONFIG_FRAME_POINTER */
+
+	/*
+	 * We add enough stack to save all regs.
+	 */
+	subq $(MCOUNT_REG_SIZE - MCOUNT_FRAME_SIZE), %rsp
+	movq %rax, RAX(%rsp)
+	movq %rcx, RCX(%rsp)
+	movq %rdx, RDX(%rsp)
+	movq %rsi, RSI(%rsp)
+	movq %rdi, RDI(%rsp)
+	movq %r8, R8(%rsp)
+	movq %r9, R9(%rsp)
+	/*
+	 * Save the original RBP. Even though the mcount ABI does not
+	 * require this, it helps out callers.
+	 */
+	movq MCOUNT_REG_SIZE-8(%rsp), %rdx
+	movq %rdx, RBP(%rsp)
+
+	/* Copy the parent address into %rsi (second parameter) */
+#ifdef CC_USING_FENTRY
+	movq MCOUNT_REG_SIZE+8+\added(%rsp), %rsi
+#else
+	/* %rdx contains original %rbp */
+	movq 8(%rdx), %rsi
+#endif
+
+	 /* Move RIP to its proper location */
+	movq MCOUNT_REG_SIZE+\added(%rsp), %rdi
+	movq %rdi, RIP(%rsp)
+
+	/*
+	 * Now %rdi (the first parameter) has the return address of
+	 * where ftrace_call returns. But the callbacks expect the
+	 * address of the call itself.
+	 */
+	subq $MCOUNT_INSN_SIZE, %rdi
+	.endm
+
+.macro restore_mcount_regs
+	movq R9(%rsp), %r9
+	movq R8(%rsp), %r8
+	movq RDI(%rsp), %rdi
+	movq RSI(%rsp), %rsi
+	movq RDX(%rsp), %rdx
+	movq RCX(%rsp), %rcx
+	movq RAX(%rsp), %rax
+
+	/* ftrace_regs_caller can modify %rbp */
+	movq RBP(%rsp), %rbp
+
+	addq $MCOUNT_REG_SIZE, %rsp
+
+	.endm
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+ENTRY(function_hook)
+	retq
+END(function_hook)
+
+ENTRY(ftrace_caller)
+	/* save_mcount_regs fills in first two parameters */
+	save_mcount_regs
+
+GLOBAL(ftrace_caller_op_ptr)
+	/* Load the ftrace_ops into the 3rd parameter */
+	movq function_trace_op(%rip), %rdx
+
+	/* regs go into 4th parameter (but make it NULL) */
+	movq $0, %rcx
+
+GLOBAL(ftrace_call)
+	call ftrace_stub
+
+	restore_mcount_regs
+
+	/*
+	 * The copied trampoline must call ftrace_return as it
+	 * still may need to call the function graph tracer.
+	 */
+GLOBAL(ftrace_caller_end)
+
+GLOBAL(ftrace_return)
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+GLOBAL(ftrace_graph_call)
+	jmp ftrace_stub
+#endif
+
+GLOBAL(ftrace_stub)
+	retq
+END(ftrace_caller)
+
+ENTRY(ftrace_regs_caller)
+	/* Save the current flags before any operations that can change them */
+	pushfq
+
+	/* added 8 bytes to save flags */
+	save_mcount_regs 8
+	/* save_mcount_regs fills in first two parameters */
+
+GLOBAL(ftrace_regs_caller_op_ptr)
+	/* Load the ftrace_ops into the 3rd parameter */
+	movq function_trace_op(%rip), %rdx
+
+	/* Save the rest of pt_regs */
+	movq %r15, R15(%rsp)
+	movq %r14, R14(%rsp)
+	movq %r13, R13(%rsp)
+	movq %r12, R12(%rsp)
+	movq %r11, R11(%rsp)
+	movq %r10, R10(%rsp)
+	movq %rbx, RBX(%rsp)
+	/* Copy saved flags */
+	movq MCOUNT_REG_SIZE(%rsp), %rcx
+	movq %rcx, EFLAGS(%rsp)
+	/* Kernel segments */
+	movq $__KERNEL_DS, %rcx
+	movq %rcx, SS(%rsp)
+	movq $__KERNEL_CS, %rcx
+	movq %rcx, CS(%rsp)
+	/* Stack - skipping return address and flags */
+	leaq MCOUNT_REG_SIZE+8*2(%rsp), %rcx
+	movq %rcx, RSP(%rsp)
+
+	/* regs go into 4th parameter */
+	leaq (%rsp), %rcx
+
+GLOBAL(ftrace_regs_call)
+	call ftrace_stub
+
+	/* Copy flags back to SS, to restore them */
+	movq EFLAGS(%rsp), %rax
+	movq %rax, MCOUNT_REG_SIZE(%rsp)
+
+	/* Handlers can change the RIP */
+	movq RIP(%rsp), %rax
+	movq %rax, MCOUNT_REG_SIZE+8(%rsp)
+
+	/* restore the rest of pt_regs */
+	movq R15(%rsp), %r15
+	movq R14(%rsp), %r14
+	movq R13(%rsp), %r13
+	movq R12(%rsp), %r12
+	movq R10(%rsp), %r10
+	movq RBX(%rsp), %rbx
+
+	restore_mcount_regs
+
+	/* Restore flags */
+	popfq
+
+	/*
+	 * As this jmp to ftrace_return can be a short jump
+	 * it must not be copied into the trampoline.
+	 * The trampoline will add the code to jump
+	 * to the return.
+	 */
+GLOBAL(ftrace_regs_caller_end)
+
+	jmp ftrace_return
+
+END(ftrace_regs_caller)
+
+
+#else /* ! CONFIG_DYNAMIC_FTRACE */
+
+ENTRY(function_hook)
+	cmpq $ftrace_stub, ftrace_trace_function
+	jnz trace
+
+fgraph_trace:
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	cmpq $ftrace_stub, ftrace_graph_return
+	jnz ftrace_graph_caller
+
+	cmpq $ftrace_graph_entry_stub, ftrace_graph_entry
+	jnz ftrace_graph_caller
+#endif
+
+GLOBAL(ftrace_stub)
+	retq
+
+trace:
+	/* save_mcount_regs fills in first two parameters */
+	save_mcount_regs
+
+	call   *ftrace_trace_function
+
+	restore_mcount_regs
+
+	jmp fgraph_trace
+END(function_hook)
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_FUNCTION_TRACER */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller)
+	/* Saves rbp into %rdx and fills first parameter  */
+	save_mcount_regs
+
+#ifdef CC_USING_FENTRY
+	leaq MCOUNT_REG_SIZE+8(%rsp), %rsi
+	movq $0, %rdx	/* No framepointers needed */
+#else
+	/* Save address of the return address of traced function */
+	leaq 8(%rdx), %rsi
+	/* ftrace does sanity checks against frame pointers */
+	movq (%rdx), %rdx
+#endif
+	call	prepare_ftrace_return
+
+	restore_mcount_regs
+
+	retq
+END(ftrace_graph_caller)
+
+GLOBAL(return_to_handler)
+	subq  $24, %rsp
+
+	/* Save the return values */
+	movq %rax, (%rsp)
+	movq %rdx, 8(%rsp)
+	movq %rbp, %rdi
+
+	call ftrace_return_to_handler
+
+	movq %rax, %rdi
+	movq 8(%rsp), %rdx
+	movq (%rsp), %rax
+	addq $24, %rsp
+	jmp *%rdi
+#endif