Linux-libre 4.7.1-gnupck-4.7.1-gnu

1 files changed, 36 insertions, 24 deletions

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c4217a23a..64a79f271 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2420,7 +2420,9 @@ static void vmx_set_msr_bitmap(struct kvm_vcpu *vcpu)
 
 	if (is_guest_mode(vcpu))
 		msr_bitmap = vmx_msr_bitmap_nested;
-	else if (vcpu->arch.apic_base & X2APIC_ENABLE) {
+	else if (cpu_has_secondary_exec_ctrls() &&
+		 (vmcs_read32(SECONDARY_VM_EXEC_CONTROL) &
+		  SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE)) {
 		if (is_long_mode(vcpu))
 			msr_bitmap = vmx_msr_bitmap_longmode_x2apic;
 		else
@@ -3392,7 +3394,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 		}
 	}
 
-	if (cpu_has_xsaves)
+	if (boot_cpu_has(X86_FEATURE_XSAVES))
 		rdmsrl(MSR_IA32_XSS, host_xss);
 
 	return 0;
@@ -4789,6 +4791,19 @@ static void vmx_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	vmcs_write32(PIN_BASED_VM_EXEC_CONTROL, vmx_pin_based_exec_ctrl(vmx));
+	if (cpu_has_secondary_exec_ctrls()) {
+		if (kvm_vcpu_apicv_active(vcpu))
+			vmcs_set_bits(SECONDARY_VM_EXEC_CONTROL,
+				      SECONDARY_EXEC_APIC_REGISTER_VIRT |
+				      SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY);
+		else
+			vmcs_clear_bits(SECONDARY_VM_EXEC_CONTROL,
+					SECONDARY_EXEC_APIC_REGISTER_VIRT |
+					SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY);
+	}
+
+	if (cpu_has_vmx_msr_bitmap())
+		vmx_set_msr_bitmap(vcpu);
 }
 
 static u32 vmx_exec_control(struct vcpu_vmx *vmx)
@@ -6335,23 +6350,20 @@ static __init int hardware_setup(void)
 
 	set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
 
-	if (enable_apicv) {
-		for (msr = 0x800; msr <= 0x8ff; msr++)
-			vmx_disable_intercept_msr_read_x2apic(msr);
-
-		/* According SDM, in x2apic mode, the whole id reg is used.
-		 * But in KVM, it only use the highest eight bits. Need to
-		 * intercept it */
-		vmx_enable_intercept_msr_read_x2apic(0x802);
-		/* TMCCT */
-		vmx_enable_intercept_msr_read_x2apic(0x839);
-		/* TPR */
-		vmx_disable_intercept_msr_write_x2apic(0x808);
-		/* EOI */
-		vmx_disable_intercept_msr_write_x2apic(0x80b);
-		/* SELF-IPI */
-		vmx_disable_intercept_msr_write_x2apic(0x83f);
-	}
+	for (msr = 0x800; msr <= 0x8ff; msr++)
+		vmx_disable_intercept_msr_read_x2apic(msr);
+
+	/* According SDM, in x2apic mode, the whole id reg is used.  But in
+	 * KVM, it only use the highest eight bits. Need to intercept it */
+	vmx_enable_intercept_msr_read_x2apic(0x802);
+	/* TMCCT */
+	vmx_enable_intercept_msr_read_x2apic(0x839);
+	/* TPR */
+	vmx_disable_intercept_msr_write_x2apic(0x808);
+	/* EOI */
+	vmx_disable_intercept_msr_write_x2apic(0x80b);
+	/* SELF-IPI */
+	vmx_disable_intercept_msr_write_x2apic(0x83f);
 
 	if (enable_ept) {
 		kvm_mmu_set_mask_ptes(0ull,
@@ -8319,19 +8331,19 @@ static void vmx_set_apic_access_page_addr(struct kvm_vcpu *vcpu, hpa_t hpa)
 		vmcs_write64(APIC_ACCESS_ADDR, hpa);
 }
 
-static void vmx_hwapic_isr_update(struct kvm *kvm, int isr)
+static void vmx_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr)
 {
 	u16 status;
 	u8 old;
 
-	if (isr == -1)
-		isr = 0;
+	if (max_isr == -1)
+		max_isr = 0;
 
 	status = vmcs_read16(GUEST_INTR_STATUS);
 	old = status >> 8;
-	if (isr != old) {
+	if (max_isr != old) {
 		status &= 0xff;
-		status |= isr << 8;
+		status |= max_isr << 8;
 		vmcs_write16(GUEST_INTR_STATUS, status);
 	}
 }