Initial import

1 files changed, 555 insertions, 0 deletions

diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
new file mode 100644
index 000000000..9a2b7101a
--- /dev/null
+++ b/arch/x86/pci/fixup.c
@@ -0,0 +1,555 @@
+/*
+ * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
+ */
+
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/vgaarb.h>
+#include <asm/hpet.h>
+#include <asm/pci_x86.h>
+
+static void pci_fixup_i450nx(struct pci_dev *d)
+{
+	/*
+	 * i450NX -- Find and scan all secondary buses on all PXB's.
+	 */
+	int pxb, reg;
+	u8 busno, suba, subb;
+
+	dev_warn(&d->dev, "Searching for i450NX host bridges\n");
+	reg = 0xd0;
+	for(pxb = 0; pxb < 2; pxb++) {
+		pci_read_config_byte(d, reg++, &busno);
+		pci_read_config_byte(d, reg++, &suba);
+		pci_read_config_byte(d, reg++, &subb);
+		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
+			suba, subb);
+		if (busno)
+			pcibios_scan_root(busno);	/* Bus A */
+		if (suba < subb)
+			pcibios_scan_root(suba+1);	/* Bus B */
+	}
+	pcibios_last_bus = -1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
+
+static void pci_fixup_i450gx(struct pci_dev *d)
+{
+	/*
+	 * i450GX and i450KX -- Find and scan all secondary buses.
+	 * (called separately for each PCI bridge found)
+	 */
+	u8 busno;
+	pci_read_config_byte(d, 0x4a, &busno);
+	dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno);
+	pcibios_scan_root(busno);
+	pcibios_last_bus = -1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx);
+
+static void pci_fixup_umc_ide(struct pci_dev *d)
+{
+	/*
+	 * UM8886BF IDE controller sets region type bits incorrectly,
+	 * therefore they look like memory despite of them being I/O.
+	 */
+	int i;
+
+	dev_warn(&d->dev, "Fixing base address flags\n");
+	for(i = 0; i < 4; i++)
+		d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
+
+static void pci_fixup_ncr53c810(struct pci_dev *d)
+{
+	/*
+	 * NCR 53C810 returns class code 0 (at least on some systems).
+	 * Fix class to be PCI_CLASS_STORAGE_SCSI
+	 */
+	if (!d->class) {
+		dev_warn(&d->dev, "Fixing NCR 53C810 class code\n");
+		d->class = PCI_CLASS_STORAGE_SCSI << 8;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810);
+
+static void pci_fixup_latency(struct pci_dev *d)
+{
+	/*
+	 *  SiS 5597 and 5598 chipsets require latency timer set to
+	 *  at most 32 to avoid lockups.
+	 */
+	dev_dbg(&d->dev, "Setting max latency to 32\n");
+	pcibios_max_latency = 32;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
+
+static void pci_fixup_piix4_acpi(struct pci_dev *d)
+{
+	/*
+	 * PIIX4 ACPI device: hardwired IRQ9
+	 */
+	d->irq = 9;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi);
+
+/*
+ * Addresses issues with problems in the memory write queue timer in
+ * certain VIA Northbridges.  This bugfix is per VIA's specifications,
+ * except for the KL133/KM133: clearing bit 5 on those Northbridges seems
+ * to trigger a bug in its integrated ProSavage video card, which
+ * causes screen corruption.  We only clear bits 6 and 7 for that chipset,
+ * until VIA can provide us with definitive information on why screen
+ * corruption occurs, and what exactly those bits do.
+ *
+ * VIA 8363,8622,8361 Northbridges:
+ *  - bits  5, 6, 7 at offset 0x55 need to be turned off
+ * VIA 8367 (KT266x) Northbridges:
+ *  - bits  5, 6, 7 at offset 0x95 need to be turned off
+ * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges:
+ *  - bits     6, 7 at offset 0x55 need to be turned off
+ */
+
+#define VIA_8363_KL133_REVISION_ID 0x81
+#define VIA_8363_KM133_REVISION_ID 0x84
+
+static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
+{
+	u8 v;
+	int where = 0x55;
+	int mask = 0x1f; /* clear bits 5, 6, 7 by default */
+
+	if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
+		/* fix pci bus latency issues resulted by NB bios error
+		   it appears on bug free^Wreduced kt266x's bios forces
+		   NB latency to zero */
+		pci_write_config_byte(d, PCI_LATENCY_TIMER, 0);
+
+		where = 0x95; /* the memory write queue timer register is
+				different for the KT266x's: 0x95 not 0x55 */
+	} else if (d->device == PCI_DEVICE_ID_VIA_8363_0 &&
+			(d->revision == VIA_8363_KL133_REVISION_ID ||
+			d->revision == VIA_8363_KM133_REVISION_ID)) {
+			mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5
+					causes screen corruption on the KL133/KM133 */
+	}
+
+	pci_read_config_byte(d, where, &v);
+	if (v & ~mask) {
+		dev_warn(&d->dev, "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
+			d->device, d->revision, where, v, mask, v & mask);
+		v &= mask;
+		pci_write_config_byte(d, where, v);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
+
+/*
+ * For some reasons Intel decided that certain parts of their
+ * 815, 845 and some other chipsets must look like PCI-to-PCI bridges
+ * while they are obviously not. The 82801 family (AA, AB, BAM/CAM,
+ * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according
+ * to Intel terminology. These devices do forward all addresses from
+ * system to PCI bus no matter what are their window settings, so they are
+ * "transparent" (or subtractive decoding) from programmers point of view.
+ */
+static void pci_fixup_transparent_bridge(struct pci_dev *dev)
+{
+	if ((dev->device & 0xff00) == 0x2400)
+		dev->transparent = 1;
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+			 PCI_CLASS_BRIDGE_PCI, 8, pci_fixup_transparent_bridge);
+
+/*
+ * Fixup for C1 Halt Disconnect problem on nForce2 systems.
+ *
+ * From information provided by "Allen Martin" <AMartin@nvidia.com>:
+ *
+ * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle
+ * sequence.  Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns.
+ * This allows the state-machine and timer to return to a proper state within
+ * 80 ns of the CONNECT and probe appearing together.  Since the CPU will not
+ * issue another HALT within 80 ns of the initial HALT, the failure condition
+ * is avoided.
+ */
+static void pci_fixup_nforce2(struct pci_dev *dev)
+{
+	u32 val;
+
+	/*
+	 * Chip  Old value   New value
+	 * C17   0x1F0FFF01  0x1F01FF01
+	 * C18D  0x9F0FFF01  0x9F01FF01
+	 *
+	 * Northbridge chip version may be determined by
+	 * reading the PCI revision ID (0xC1 or greater is C18D).
+	 */
+	pci_read_config_dword(dev, 0x6c, &val);
+
+	/*
+	 * Apply fixup if needed, but don't touch disconnect state
+	 */
+	if ((val & 0x00FF0000) != 0x00010000) {
+		dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n");
+		pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
+
+/* Max PCI Express root ports */
+#define MAX_PCIEROOT	6
+static int quirk_aspm_offset[MAX_PCIEROOT << 3];
+
+#define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7))
+
+static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
+{
+	return raw_pci_read(pci_domain_nr(bus), bus->number,
+						devfn, where, size, value);
+}
+
+/*
+ * Replace the original pci bus ops for write with a new one that will filter
+ * the request to insure ASPM cannot be enabled.
+ */
+static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
+{
+	u8 offset;
+
+	offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)];
+
+	if ((offset) && (where == offset))
+		value = value & ~PCI_EXP_LNKCTL_ASPMC;
+
+	return raw_pci_write(pci_domain_nr(bus), bus->number,
+						devfn, where, size, value);
+}
+
+static struct pci_ops quirk_pcie_aspm_ops = {
+	.read = quirk_pcie_aspm_read,
+	.write = quirk_pcie_aspm_write,
+};
+
+/*
+ * Prevents PCI Express ASPM (Active State Power Management) being enabled.
+ *
+ * Save the register offset, where the ASPM control bits are located,
+ * for each PCI Express device that is in the device list of
+ * the root port in an array for fast indexing. Replace the bus ops
+ * with the modified one.
+ */
+static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
+{
+	int i;
+	struct pci_bus  *pbus;
+	struct pci_dev *dev;
+
+	if ((pbus = pdev->subordinate) == NULL)
+		return;
+
+	/*
+	 * Check if the DID of pdev matches one of the six root ports. This
+	 * check is needed in the case this function is called directly by the
+	 * hot-plug driver.
+	 */
+	if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) ||
+	    (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1))
+		return;
+
+	if (list_empty(&pbus->devices)) {
+		/*
+		 * If no device is attached to the root port at power-up or
+		 * after hot-remove, the pbus->devices is empty and this code
+		 * will set the offsets to zero and the bus ops to parent's bus
+		 * ops, which is unmodified.
+		 */
+		for (i = GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i)
+			quirk_aspm_offset[i] = 0;
+
+		pci_bus_set_ops(pbus, pbus->parent->ops);
+	} else {
+		/*
+		 * If devices are attached to the root port at power-up or
+		 * after hot-add, the code loops through the device list of
+		 * each root port to save the register offsets and replace the
+		 * bus ops.
+		 */
+		list_for_each_entry(dev, &pbus->devices, bus_list)
+			/* There are 0 to 8 devices attached to this bus */
+			quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)] =
+				dev->pcie_cap + PCI_EXP_LNKCTL;
+
+		pci_bus_set_ops(pbus, &quirk_pcie_aspm_ops);
+		dev_info(&pbus->dev, "writes to ASPM control bits will be ignored\n");
+	}
+
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PA,	pcie_rootport_aspm_quirk);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PA1,	pcie_rootport_aspm_quirk);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PB,	pcie_rootport_aspm_quirk);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PB1,	pcie_rootport_aspm_quirk);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PC,	pcie_rootport_aspm_quirk);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PC1,	pcie_rootport_aspm_quirk);
+
+/*
+ * Fixup to mark boot BIOS video selected by BIOS before it changes
+ *
+ * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
+ *
+ * The standard boot ROM sequence for an x86 machine uses the BIOS
+ * to select an initial video card for boot display. This boot video
+ * card will have it's BIOS copied to C0000 in system RAM.
+ * IORESOURCE_ROM_SHADOW is used to associate the boot video
+ * card with this copy. On laptops this copy has to be used since
+ * the main ROM may be compressed or combined with another image.
+ * See pci_map_rom() for use of this flag. Before marking the device
+ * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
+ * by either arch cde or vga-arbitration, if so only apply the fixup to this
+ * already determined primary video card.
+ */
+
+static void pci_fixup_video(struct pci_dev *pdev)
+{
+	struct pci_dev *bridge;
+	struct pci_bus *bus;
+	u16 config;
+
+	/* Is VGA routed to us? */
+	bus = pdev->bus;
+	while (bus) {
+		bridge = bus->self;
+
+		/*
+		 * From information provided by
+		 * "David Miller" <davem@davemloft.net>
+		 * The bridge control register is valid for PCI header
+		 * type BRIDGE, or CARDBUS. Host to PCI controllers use
+		 * PCI header type NORMAL.
+		 */
+		if (bridge && (pci_is_bridge(bridge))) {
+			pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
+						&config);
+			if (!(config & PCI_BRIDGE_CTL_VGA))
+				return;
+		}
+		bus = bus->parent;
+	}
+	if (!vga_default_device() || pdev == vga_default_device()) {
+		pci_read_config_word(pdev, PCI_COMMAND, &config);
+		if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+			pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+			dev_printk(KERN_DEBUG, &pdev->dev, "Video device with shadowed ROM\n");
+		}
+	}
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+				PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video);
+
+
+static const struct dmi_system_id msi_k8t_dmi_table[] = {
+	{
+		.ident = "MSI-K8T-Neo2Fir",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MS-6702E"),
+		},
+	},
+	{}
+};
+
+/*
+ * The AMD-Athlon64 board MSI "K8T Neo2-FIR" disables the onboard sound
+ * card if a PCI-soundcard is added.
+ *
+ * The BIOS only gives options "DISABLED" and "AUTO". This code sets
+ * the corresponding register-value to enable the soundcard.
+ *
+ * The soundcard is only enabled, if the mainborad is identified
+ * via DMI-tables and the soundcard is detected to be off.
+ */
+static void pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev)
+{
+	unsigned char val;
+	if (!dmi_check_system(msi_k8t_dmi_table))
+		return; /* only applies to MSI K8T Neo2-FIR */
+
+	pci_read_config_byte(dev, 0x50, &val);
+	if (val & 0x40) {
+		pci_write_config_byte(dev, 0x50, val & (~0x40));
+
+		/* verify the change for status output */
+		pci_read_config_byte(dev, 0x50, &val);
+		if (val & 0x40)
+			dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
+					"can't enable onboard soundcard!\n");
+		else
+			dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
+					"enabled onboard soundcard\n");
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
+		pci_fixup_msi_k8t_onboard_sound);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
+		pci_fixup_msi_k8t_onboard_sound);
+
+/*
+ * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A.
+ *
+ * We pretend to bring them out of full D3 state, and restore the proper
+ * IRQ, PCI cache line size, and BARs, otherwise the device won't function
+ * properly.  In some cases, the device will generate an interrupt on
+ * the wrong IRQ line, causing any devices sharing the line it's
+ * *supposed* to use to be disabled by the kernel's IRQ debug code.
+ */
+static u16 toshiba_line_size;
+
+static const struct dmi_system_id toshiba_ohci1394_dmi_table[] = {
+	{
+		.ident = "Toshiba PS5 based laptop",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"),
+		},
+	},
+	{
+		.ident = "Toshiba PSM4 based laptop",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"),
+		},
+	},
+	{
+		.ident = "Toshiba A40 based laptop",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "PSA40U"),
+		},
+	},
+	{ }
+};
+
+static void pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev)
+{
+	if (!dmi_check_system(toshiba_ohci1394_dmi_table))
+		return; /* only applies to certain Toshibas (so far) */
+
+	dev->current_state = PCI_D3cold;
+	pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032,
+			 pci_pre_fixup_toshiba_ohci1394);
+
+static void pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev)
+{
+	if (!dmi_check_system(toshiba_ohci1394_dmi_table))
+		return; /* only applies to certain Toshibas (so far) */
+
+	/* Restore config space on Toshiba laptops */
+	pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size);
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq);
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
+			       pci_resource_start(dev, 0));
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_1,
+			       pci_resource_start(dev, 1));
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032,
+			 pci_post_fixup_toshiba_ohci1394);
+
+
+/*
+ * Prevent the BIOS trapping accesses to the Cyrix CS5530A video device
+ * configuration space.
+ */
+static void pci_early_fixup_cyrix_5530(struct pci_dev *dev)
+{
+	u8 r;
+	/* clear 'F4 Video Configuration Trap' bit */
+	pci_read_config_byte(dev, 0x42, &r);
+	r &= 0xfd;
+	pci_write_config_byte(dev, 0x42, r);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
+			pci_early_fixup_cyrix_5530);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
+			pci_early_fixup_cyrix_5530);
+
+/*
+ * Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller:
+ * prevent update of the BAR0, which doesn't look like a normal BAR.
+ */
+static void pci_siemens_interrupt_controller(struct pci_dev *dev)
+{
+	dev->resource[0].flags |= IORESOURCE_PCI_FIXED;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015,
+			  pci_siemens_interrupt_controller);
+
+/*
+ * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
+ * confusing the PCI engine:
+ */
+static void sb600_disable_hpet_bar(struct pci_dev *dev)
+{
+	u8 val;
+
+	/*
+	 * The SB600 and SB700 both share the same device
+	 * ID, but the PM register 0x55 does something different
+	 * for the SB700, so make sure we are dealing with the
+	 * SB600 before touching the bit:
+	 */
+
+	pci_read_config_byte(dev, 0x08, &val);
+
+	if (val < 0x2F) {
+		outb(0x55, 0xCD6);
+		val = inb(0xCD7);
+
+		/* Set bit 7 in PM register 0x55 */
+		outb(0x55, 0xCD6);
+		outb(val | 0x80, 0xCD7);
+	}
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar);
+
+#ifdef CONFIG_HPET_TIMER
+static void sb600_hpet_quirk(struct pci_dev *dev)
+{
+	struct resource *r = &dev->resource[1];
+
+	if (r->flags & IORESOURCE_MEM && r->start == hpet_address) {
+		r->flags |= IORESOURCE_PCI_FIXED;
+		dev_info(&dev->dev, "reg 0x14 contains HPET; making it immovable\n");
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x4385, sb600_hpet_quirk);
+#endif
+
+/*
+ * Twinhead H12Y needs us to block out a region otherwise we map devices
+ * there and any access kills the box.
+ *
+ *   See: https://bugzilla.kernel.org/show_bug.cgi?id=10231
+ *
+ * Match off the LPC and svid/sdid (older kernels lose the bridge subvendor)
+ */
+static void twinhead_reserve_killing_zone(struct pci_dev *dev)
+{
+        if (dev->subsystem_vendor == 0x14FF && dev->subsystem_device == 0xA003) {
+                pr_info("Reserving memory on Twinhead H12Y\n");
+                request_mem_region(0xFFB00000, 0x100000, "twinhead");
+        }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);