Linux-libre 4.5.1-gnupck-4.5.1-gnu

40 files changed, 363 insertions, 223 deletions

diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 44a578c10..ab5d5701e 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -47,6 +47,14 @@
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
 			max-speed = <100>;
+			mdio0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
 		};
 
 		ehci@0x40000 {
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index 57c1f3384..0352fb8d2 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -35,21 +35,6 @@ static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
 									\
 	m += nr >> 5;							\
 									\
-	/*								\
-	 * ARC ISA micro-optimization:					\
-	 *								\
-	 * Instructions dealing with bitpos only consider lower 5 bits	\
-	 * e.g (x << 33) is handled like (x << 1) by ASL instruction	\
-	 *  (mem pointer still needs adjustment to point to next word)	\
-	 *								\
-	 * Hence the masking to clamp @nr arg can be elided in general.	\
-	 *								\
-	 * However if @nr is a constant (above assumed in a register),	\
-	 * and greater than 31, gcc can optimize away (x << 33) to 0,	\
-	 * as overflow, given the 32-bit ISA. Thus masking needs to be	\
-	 * done for const @nr, but no code is generated due to gcc	\
-	 * const prop.							\
-	 */								\
 	nr &= 0x1f;							\
 									\
 	__asm__ __volatile__(						\
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 694ece8a0..27b17adea 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -129,15 +129,23 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 #define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
 
 /*
- * Relaxed API for drivers which can handle any ordering themselves
+ * Relaxed API for drivers which can handle barrier ordering themselves
+ *
+ * Also these are defined to perform little endian accesses.
+ * To provide the typical device register semantics of fixed endian,
+ * swap the byte order for Big Endian
+ *
+ * http://lkml.kernel.org/r/201603100845.30602.arnd@arndb.de
  */
 #define readb_relaxed(c)	__raw_readb(c)
-#define readw_relaxed(c)	__raw_readw(c)
-#define readl_relaxed(c)	__raw_readl(c)
+#define readw_relaxed(c) ({ u16 __r = le16_to_cpu((__force __le16) \
+					__raw_readw(c)); __r; })
+#define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32) \
+					__raw_readl(c)); __r; })
 
 #define writeb_relaxed(v,c)	__raw_writeb(v,c)
-#define writew_relaxed(v,c)	__raw_writew(v,c)
-#define writel_relaxed(v,c)	__raw_writel(v,c)
+#define writew_relaxed(v,c)	__raw_writew((__force u16) cpu_to_le16(v),c)
+#define writel_relaxed(v,c)	__raw_writel((__force u32) cpu_to_le32(v),c)
 
 #include <asm-generic/io.h>
 
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index ff888d21c..f3e2b96c0 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -303,6 +303,7 @@
 		regulator-name = "mmc0-card-supply";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	gpio_keys {
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 569026e8f..da84e65b5 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -268,5 +268,6 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
 	};
 };
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 819aff5d5..727321078 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -279,7 +279,7 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr);
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pte)
 {
-	if (pte_valid(pte)) {
+	if (pte_present(pte)) {
 		if (pte_sw_dirty(pte) && pte_write(pte))
 			pte_val(pte) &= ~PTE_RDONLY;
 		else
@@ -649,6 +649,7 @@ extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
  *	bits 0-1:	present (must be zero)
  *	bits 2-7:	swap type
  *	bits 8-57:	swap offset
+ *	bit  58:	PTE_PROT_NONE (must be zero)
  */
 #define __SWP_TYPE_SHIFT	2
 #define __SWP_TYPE_BITS		6
diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h
index a865d2a04..5de673ac9 100644
--- a/arch/ia64/include/asm/io.h
+++ b/arch/ia64/include/asm/io.h
@@ -433,6 +433,7 @@ static inline void __iomem * ioremap_cache (unsigned long phys_addr, unsigned lo
 	return ioremap(phys_addr, size);
 }
 #define ioremap_cache ioremap_cache
+#define ioremap_uc ioremap_nocache
 
 
 /*
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 998f632e7..5c80a0f9d 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -64,11 +64,6 @@ static struct timer_list spusched_timer;
 static struct timer_list spuloadavg_timer;
 
 /*
- * Priority of a normal, non-rt, non-niced'd process (aka nice level 0).
- */
-#define NORMAL_PRIO		120
-
-/*
  * Frequency of the spu scheduler tick.  By default we do one SPU scheduler
  * tick for every 10 CPU scheduler ticks.
  */
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index c873e682b..2b2ced9dc 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -45,7 +45,7 @@ struct zpci_fmb {
 	u64 rpcit_ops;
 	u64 dma_rbytes;
 	u64 dma_wbytes;
-} __packed __aligned(16);
+} __packed __aligned(64);
 
 enum zpci_state {
 	ZPCI_FN_STATE_RESERVED,
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index cd5a19138..c920b81be 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -1199,114 +1199,12 @@ cleanup_critical:
 	.quad	.Lpsw_idle_lpsw
 
 .Lcleanup_save_fpu_regs:
-	TSTMSK	__LC_CPU_FLAGS,_CIF_FPU
-	bor	%r14
-	clg	%r9,BASED(.Lcleanup_save_fpu_regs_done)
-	jhe	5f
-	clg	%r9,BASED(.Lcleanup_save_fpu_regs_fp)
-	jhe	4f
-	clg	%r9,BASED(.Lcleanup_save_fpu_regs_vx_high)
-	jhe	3f
-	clg	%r9,BASED(.Lcleanup_save_fpu_regs_vx_low)
-	jhe	2f
-	clg	%r9,BASED(.Lcleanup_save_fpu_fpc_end)
-	jhe	1f
-	lg	%r2,__LC_CURRENT
-	aghi	%r2,__TASK_thread
-0:	# Store floating-point controls
-	stfpc	__THREAD_FPU_fpc(%r2)
-1:	# Load register save area and check if VX is active
-	lg	%r3,__THREAD_FPU_regs(%r2)
-	TSTMSK	__LC_MACHINE_FLAGS,MACHINE_FLAG_VX
-	jz	4f			  # no VX -> store FP regs
-2:	# Store vector registers (V0-V15)
-	VSTM	%v0,%v15,0,%r3		  # vstm 0,15,0(3)
-3:	# Store vector registers (V16-V31)
-	VSTM	%v16,%v31,256,%r3	  # vstm 16,31,256(3)
-	j	5f			  # -> done, set CIF_FPU flag
-4:	# Store floating-point registers
-	std	0,0(%r3)
-	std	1,8(%r3)
-	std	2,16(%r3)
-	std	3,24(%r3)
-	std	4,32(%r3)
-	std	5,40(%r3)
-	std	6,48(%r3)
-	std	7,56(%r3)
-	std	8,64(%r3)
-	std	9,72(%r3)
-	std	10,80(%r3)
-	std	11,88(%r3)
-	std	12,96(%r3)
-	std	13,104(%r3)
-	std	14,112(%r3)
-	std	15,120(%r3)
-5:	# Set CIF_FPU flag
-	oi	__LC_CPU_FLAGS+7,_CIF_FPU
-	lg	%r9,48(%r11)		# return from save_fpu_regs
+	larl	%r9,save_fpu_regs
 	br	%r14
-.Lcleanup_save_fpu_fpc_end:
-	.quad	.Lsave_fpu_regs_fpc_end
-.Lcleanup_save_fpu_regs_vx_low:
-	.quad	.Lsave_fpu_regs_vx_low
-.Lcleanup_save_fpu_regs_vx_high:
-	.quad	.Lsave_fpu_regs_vx_high
-.Lcleanup_save_fpu_regs_fp:
-	.quad	.Lsave_fpu_regs_fp
-.Lcleanup_save_fpu_regs_done:
-	.quad	.Lsave_fpu_regs_done
 
 .Lcleanup_load_fpu_regs:
-	TSTMSK	__LC_CPU_FLAGS,_CIF_FPU
-	bnor	%r14
-	clg	%r9,BASED(.Lcleanup_load_fpu_regs_done)
-	jhe	1f
-	clg	%r9,BASED(.Lcleanup_load_fpu_regs_fp)
-	jhe	2f
-	clg	%r9,BASED(.Lcleanup_load_fpu_regs_vx_high)
-	jhe	3f
-	clg	%r9,BASED(.Lcleanup_load_fpu_regs_vx)
-	jhe	4f
-	lg	%r4,__LC_CURRENT
-	aghi	%r4,__TASK_thread
-	lfpc	__THREAD_FPU_fpc(%r4)
-	TSTMSK	__LC_MACHINE_FLAGS,MACHINE_FLAG_VX
-	lg	%r4,__THREAD_FPU_regs(%r4)	# %r4 <- reg save area
-	jz	2f				# -> no VX, load FP regs
-4:	# Load V0 ..V15 registers
-	VLM	%v0,%v15,0,%r4
-3:	# Load V16..V31 registers
-	VLM	%v16,%v31,256,%r4
-	j	1f
-2:	# Load floating-point registers
-	ld	0,0(%r4)
-	ld	1,8(%r4)
-	ld	2,16(%r4)
-	ld	3,24(%r4)
-	ld	4,32(%r4)
-	ld	5,40(%r4)
-	ld	6,48(%r4)
-	ld	7,56(%r4)
-	ld	8,64(%r4)
-	ld	9,72(%r4)
-	ld	10,80(%r4)
-	ld	11,88(%r4)
-	ld	12,96(%r4)
-	ld	13,104(%r4)
-	ld	14,112(%r4)
-	ld	15,120(%r4)
-1:	# Clear CIF_FPU bit
-	ni	__LC_CPU_FLAGS+7,255-_CIF_FPU
-	lg	%r9,48(%r11)		# return from load_fpu_regs
+	larl	%r9,load_fpu_regs
 	br	%r14
-.Lcleanup_load_fpu_regs_vx:
-	.quad	.Lload_fpu_regs_vx
-.Lcleanup_load_fpu_regs_vx_high:
-	.quad	.Lload_fpu_regs_vx_high
-.Lcleanup_load_fpu_regs_fp:
-	.quad	.Lload_fpu_regs_fp
-.Lcleanup_load_fpu_regs_done:
-	.quad	.Lload_fpu_regs_done
 
 /*
  * Integer constants
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 9220db5c9..93fc63ef6 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -327,6 +327,7 @@ static void __init setup_lowcore(void)
 		+ PAGE_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);
 	lc->current_task = (unsigned long) init_thread_union.thread_info.task;
 	lc->thread_info = (unsigned long) &init_thread_union;
+	lc->lpp = LPP_MAGIC;
 	lc->machine_flags = S390_lowcore.machine_flags;
 	lc->stfl_fac_list = S390_lowcore.stfl_fac_list;
 	memcpy(lc->stfle_fac_list, S390_lowcore.stfle_fac_list,
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 8f19c8f9d..8f75edc99 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -864,8 +864,11 @@ static inline int barsize(u8 size)
 
 static int zpci_mem_init(void)
 {
+	BUILD_BUG_ON(!is_power_of_2(__alignof__(struct zpci_fmb)) ||
+		     __alignof__(struct zpci_fmb) < sizeof(struct zpci_fmb));
+
 	zdev_fmb_cache = kmem_cache_create("PCI_FMB_cache", sizeof(struct zpci_fmb),
-				16, 0, NULL);
+					   __alignof__(struct zpci_fmb), 0, NULL);
 	if (!zdev_fmb_cache)
 		goto error_fmb;
 
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
index ec29e14ec..bf25d7c79 100644
--- a/arch/sh/mm/kmap.c
+++ b/arch/sh/mm/kmap.c
@@ -36,6 +36,7 @@ void *kmap_coherent(struct page *page, unsigned long addr)
 
 	BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
 
+	preempt_disable();
 	pagefault_disable();
 
 	idx = FIX_CMAP_END -
@@ -64,4 +65,5 @@ void kunmap_coherent(void *kvaddr)
 	}
 
 	pagefault_enable();
+	preempt_enable();
 }
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index b821b13d3..8a6b57108 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -133,7 +133,7 @@ void mconsole_proc(struct mc_request *req)
 	ptr += strlen("proc");
 	ptr = skip_spaces(ptr);
 
-	file = file_open_root(mnt->mnt_root, mnt, ptr, O_RDONLY);
+	file = file_open_root(mnt->mnt_root, mnt, ptr, O_RDONLY, 0);
 	if (IS_ERR(file)) {
 		mconsole_reply(req, "Failed to open file", 1, 0);
 		printk(KERN_ERR "open /proc/%s: %ld\n", ptr, PTR_ERR(file));
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c46662f64..b971ea4be 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -911,10 +911,26 @@ config SCHED_SMT
 	depends on SMP
 	---help---
 	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with Intel Pentium 4 chips with HyperThreading at a
+	  when dealing with Intel P4/Core 2 chips with HyperThreading at a
 	  cost of slightly increased overhead in some places. If unsure say
 	  N here.
 
+config SMT_NICE
+	bool "SMT (Hyperthreading) aware nice priority and policy support"
+	depends on SCHED_BFS && SCHED_SMT
+	default y
+	---help---
+	  Enabling Hyperthreading on Intel CPUs decreases the effectiveness
+	  of the use of 'nice' levels and different scheduling policies
+	  (e.g. realtime) due to sharing of CPU power between hyperthreads.
+	  SMT nice support makes each logical CPU aware of what is running on
+	  its hyperthread siblings, maintaining appropriate distribution of
+	  CPU according to nice levels and scheduling policies at the expense
+	  of slightly increased overhead.
+
+	  If unsure say Y here.
+
+
 config SCHED_MC
 	def_bool y
 	prompt "Multi-core scheduler support"
@@ -1160,22 +1176,23 @@ config MICROCODE
 	bool "CPU microcode loading support"
 	default y
 	depends on CPU_SUP_AMD || CPU_SUP_INTEL
-	depends on BLK_DEV_INITRD
 	select FW_LOADER
 	---help---
-
 	  If you say Y here, you will be able to update the microcode on
-	  certain Intel and AMD processors. The Intel support is for the
-	  IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4,
-	  Xeon etc. The AMD support is for families 0x10 and later. You will
-	  obviously need the actual microcode binary data itself which is not
-	  shipped with the Linux kernel.
+	  Intel and AMD processors. The Intel support is for the IA32 family,
+	  e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4, Xeon etc. The
+	  AMD support is for families 0x10 and later. You will obviously need
+	  the actual microcode binary data itself which is not shipped with
+	  the Linux kernel.
 
-	  This option selects the general module only, you need to select
-	  at least one vendor specific module as well.
+	  The preferred method to load microcode from a detached initrd is described
+	  in Documentation/x86/early-microcode.txt. For that you need to enable
+	  CONFIG_BLK_DEV_INITRD in order for the loader to be able to scan the
+	  initrd for microcode blobs.
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called microcode.
+	  In addition, you can build-in the microcode into the kernel. For that you
+	  need to enable FIRMWARE_IN_KERNEL and add the vendor-supplied microcode
+	  to the CONFIG_EXTRA_FIRMWARE config option.
 
 config MICROCODE_INTEL
 	bool "Intel microcode loading support"
@@ -1995,7 +2012,7 @@ config HOTPLUG_CPU
 config BOOTPARAM_HOTPLUG_CPU0
 	bool "Set default setting of cpu0_hotpluggable"
 	default n
-	depends on HOTPLUG_CPU
+	depends on HOTPLUG_CPU && !SCHED_BFS
 	---help---
 	  Set whether default state of cpu0_hotpluggable is on or off.
 
@@ -2024,7 +2041,7 @@ config BOOTPARAM_HOTPLUG_CPU0
 config DEBUG_HOTPLUG_CPU0
 	def_bool n
 	prompt "Debug CPU0 hotplug"
-	depends on HOTPLUG_CPU
+	depends on HOTPLUG_CPU && !SCHED_BFS
 	---help---
 	  Enabling this option offlines CPU0 (if CPU0 can be offlined) as
 	  soon as possible and boots up userspace with CPU0 offlined. User
diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index 03663740c..1a4477ced 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -268,6 +268,7 @@ static void exit_to_usermode_loop(struct pt_regs *regs, u32 cached_flags)
 /* Called with IRQs disabled. */
 __visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
 {
+	struct thread_info *ti = pt_regs_to_thread_info(regs);
 	u32 cached_flags;
 
 	if (IS_ENABLED(CONFIG_PROVE_LOCKING) && WARN_ON(!irqs_disabled()))
@@ -275,12 +276,22 @@ __visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
 
 	lockdep_sys_exit();
 
-	cached_flags =
-		READ_ONCE(pt_regs_to_thread_info(regs)->flags);
+	cached_flags = READ_ONCE(ti->flags);
 
 	if (unlikely(cached_flags & EXIT_TO_USERMODE_LOOP_FLAGS))
 		exit_to_usermode_loop(regs, cached_flags);
 
+#ifdef CONFIG_COMPAT
+	/*
+	 * Compat syscalls set TS_COMPAT.  Make sure we clear it before
+	 * returning to user mode.  We need to clear it *after* signal
+	 * handling, because syscall restart has a fixup for compat
+	 * syscalls.  The fixup is exercised by the ptrace_syscall_32
+	 * selftest.
+	 */
+	ti->status &= ~TS_COMPAT;
+#endif
+
 	user_enter();
 }
 
@@ -332,14 +343,6 @@ __visible inline void syscall_return_slowpath(struct pt_regs *regs)
 	if (unlikely(cached_flags & SYSCALL_EXIT_WORK_FLAGS))
 		syscall_slow_exit_work(regs, cached_flags);
 
-#ifdef CONFIG_COMPAT
-	/*
-	 * Compat syscalls set TS_COMPAT.  Make sure we clear it before
-	 * returning to user mode.
-	 */
-	ti->status &= ~TS_COMPAT;
-#endif
-
 	local_irq_disable();
 	prepare_exit_to_usermode(regs);
 }
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index c80f6b6f3..e8c4fba52 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -644,8 +644,8 @@ static inline void entering_irq(void)
 
 static inline void entering_ack_irq(void)
 {
-	ack_APIC_irq();
 	entering_irq();
+	ack_APIC_irq();
 }
 
 static inline void ipi_entering_ack_irq(void)
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 1815b7362..84b3d194a 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -141,6 +141,7 @@ struct irq_alloc_info {
 struct irq_cfg {
 	unsigned int		dest_apicid;
 	u8			vector;
+	u8			old_vector;
 };
 
 extern struct irq_cfg *irq_cfg(unsigned int irq);
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 1e1b07a5a..9d3a96c4d 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -3,6 +3,7 @@
 
 #include <asm/cpu.h>
 #include <linux/earlycpio.h>
+#include <linux/initrd.h>
 
 #define native_rdmsr(msr, val1, val2)			\
 do {							\
@@ -143,4 +144,29 @@ static inline void reload_early_microcode(void)			{ }
 static inline bool
 get_builtin_firmware(struct cpio_data *cd, const char *name)	{ return false; }
 #endif
+
+static inline unsigned long get_initrd_start(void)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+	return initrd_start;
+#else
+	return 0;
+#endif
+}
+
+static inline unsigned long get_initrd_start_addr(void)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+#ifdef CONFIG_X86_32
+	unsigned long *initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start);
+
+	return (unsigned long)__pa_nodebug(*initrd_start_p);
+#else
+	return get_initrd_start();
+#endif
+#else /* CONFIG_BLK_DEV_INITRD */
+	return 0;
+#endif
+}
+
 #endif /* _ASM_X86_MICROCODE_H */
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 7bcb861a0..5a2ed3ed2 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -165,6 +165,7 @@ struct x86_pmu_capability {
 #define GLOBAL_STATUS_ASIF				BIT_ULL(60)
 #define GLOBAL_STATUS_COUNTERS_FROZEN			BIT_ULL(59)
 #define GLOBAL_STATUS_LBRS_FROZEN			BIT_ULL(58)
+#define GLOBAL_STATUS_TRACE_TOPAPMI			BIT_ULL(55)
 
 /*
  * IBS cpuid feature detection
diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h
index 8b2d4bea9..39171b364 100644
--- a/arch/x86/include/asm/xen/hypervisor.h
+++ b/arch/x86/include/asm/xen/hypervisor.h
@@ -62,4 +62,6 @@ void xen_arch_register_cpu(int num);
 void xen_arch_unregister_cpu(int num);
 #endif
 
+extern void xen_set_iopl_mask(unsigned mask);
+
 #endif /* _ASM_X86_XEN_HYPERVISOR_H */
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 3b670df4b..ad59d70bc 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -213,6 +213,7 @@ update:
 	 */
 	cpumask_and(d->old_domain, d->old_domain, cpu_online_mask);
 	d->move_in_progress = !cpumask_empty(d->old_domain);
+	d->cfg.old_vector = d->move_in_progress ? d->cfg.vector : 0;
 	d->cfg.vector = vector;
 	cpumask_copy(d->domain, vector_cpumask);
 success:
@@ -655,46 +656,97 @@ void irq_complete_move(struct irq_cfg *cfg)
 }
 
 /*
- * Called with @desc->lock held and interrupts disabled.
+ * Called from fixup_irqs() with @desc->lock held and interrupts disabled.
  */
 void irq_force_complete_move(struct irq_desc *desc)
 {
 	struct irq_data *irqdata = irq_desc_get_irq_data(desc);
 	struct apic_chip_data *data = apic_chip_data(irqdata);
 	struct irq_cfg *cfg = data ? &data->cfg : NULL;
+	unsigned int cpu;
 
 	if (!cfg)
 		return;
 
-	__irq_complete_move(cfg, cfg->vector);
-
 	/*
 	 * This is tricky. If the cleanup of @data->old_domain has not been
 	 * done yet, then the following setaffinity call will fail with
 	 * -EBUSY. This can leave the interrupt in a stale state.
 	 *
-	 * The cleanup cannot make progress because we hold @desc->lock. So in
-	 * case @data->old_domain is not yet cleaned up, we need to drop the
-	 * lock and acquire it again. @desc cannot go away, because the
-	 * hotplug code holds the sparse irq lock.
+	 * All CPUs are stuck in stop machine with interrupts disabled so
+	 * calling __irq_complete_move() would be completely pointless.
 	 */
 	raw_spin_lock(&vector_lock);
-	/* Clean out all offline cpus (including ourself) first. */
+	/*
+	 * Clean out all offline cpus (including the outgoing one) from the
+	 * old_domain mask.
+	 */
 	cpumask_and(data->old_domain, data->old_domain, cpu_online_mask);
-	while (!cpumask_empty(data->old_domain)) {
+
+	/*
+	 * If move_in_progress is cleared and the old_domain mask is empty,
+	 * then there is nothing to cleanup. fixup_irqs() will take care of
+	 * the stale vectors on the outgoing cpu.
+	 */
+	if (!data->move_in_progress && cpumask_empty(data->old_domain)) {
 		raw_spin_unlock(&vector_lock);
-		raw_spin_unlock(&desc->lock);
-		cpu_relax();
-		raw_spin_lock(&desc->lock);
+		return;
+	}
+
+	/*
+	 * 1) The interrupt is in move_in_progress state. That means that we
+	 *    have not seen an interrupt since the io_apic was reprogrammed to
+	 *    the new vector.
+	 *
+	 * 2) The interrupt has fired on the new vector, but the cleanup IPIs
+	 *    have not been processed yet.
+	 */
+	if (data->move_in_progress) {
 		/*
-		 * Reevaluate apic_chip_data. It might have been cleared after
-		 * we dropped @desc->lock.
+		 * In theory there is a race:
+		 *
+		 * set_ioapic(new_vector) <-- Interrupt is raised before update
+		 *			      is effective, i.e. it's raised on
+		 *			      the old vector.
+		 *
+		 * So if the target cpu cannot handle that interrupt before
+		 * the old vector is cleaned up, we get a spurious interrupt
+		 * and in the worst case the ioapic irq line becomes stale.
+		 *
+		 * But in case of cpu hotplug this should be a non issue
+		 * because if the affinity update happens right before all
+		 * cpus rendevouz in stop machine, there is no way that the
+		 * interrupt can be blocked on the target cpu because all cpus
+		 * loops first with interrupts enabled in stop machine, so the
+		 * old vector is not yet cleaned up when the interrupt fires.
+		 *
+		 * So the only way to run into this issue is if the delivery
+		 * of the interrupt on the apic/system bus would be delayed
+		 * beyond the point where the target cpu disables interrupts
+		 * in stop machine. I doubt that it can happen, but at least
+		 * there is a theroretical chance. Virtualization might be
+		 * able to expose this, but AFAICT the IOAPIC emulation is not
+		 * as stupid as the real hardware.
+		 *
+		 * Anyway, there is nothing we can do about that at this point
+		 * w/o refactoring the whole fixup_irq() business completely.
+		 * We print at least the irq number and the old vector number,
+		 * so we have the necessary information when a problem in that
+		 * area arises.
 		 */
-		data = apic_chip_data(irqdata);
-		if (!data)
-			return;
-		raw_spin_lock(&vector_lock);
+		pr_warn("IRQ fixup: irq %d move in progress, old vector %d\n",
+			irqdata->irq, cfg->old_vector);
 	}
+	/*
+	 * If old_domain is not empty, then other cpus still have the irq
+	 * descriptor set in their vector array. Clean it up.
+	 */
+	for_each_cpu(cpu, data->old_domain)
+		per_cpu(vector_irq, cpu)[cfg->old_vector] = VECTOR_UNUSED;
+
+	/* Cleanup the left overs of the (half finished) move */
+	cpumask_clear(data->old_domain);
+	data->move_in_progress = 0;
 	raw_spin_unlock(&vector_lock);
 }
 #endif
diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c
index de8a164a6..f9c7f3302 100644
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -551,10 +551,14 @@ scan_microcode(struct mc_saved_data *mc_saved_data, unsigned long *initrd,
 	cd.data = NULL;
 	cd.size = 0;
 
-	cd = find_cpio_data(p, (void *)start, size, &offset);
-	if (!cd.data) {
+	/* try built-in microcode if no initrd */
+	if (!size) {
 		if (!load_builtin_intel_microcode(&cd))
 			return UCODE_ERROR;
+	} else {
+		cd = find_cpio_data(p, (void *)start, size, &offset);
+		if (!cd.data)
+			return UCODE_ERROR;
 	}
 
 	return get_matching_model_microcode(0, start, cd.data, cd.size,
@@ -690,7 +694,7 @@ int __init save_microcode_in_initrd_intel(void)
 	if (count == 0)
 		return ret;
 
-	copy_initrd_ptrs(mc_saved, mc_saved_in_initrd, initrd_start, count);
+	copy_initrd_ptrs(mc_saved, mc_saved_in_initrd, get_initrd_start(), count);
 	ret = save_microcode(&mc_saved_data, mc_saved, count);
 	if (ret)
 		pr_err("Cannot save microcode patches from initrd.\n");
@@ -728,16 +732,20 @@ void __init load_ucode_intel_bsp(void)
 	struct boot_params *p;
 
 	p	= (struct boot_params *)__pa_nodebug(&boot_params);
-	start	= p->hdr.ramdisk_image;
 	size	= p->hdr.ramdisk_size;
 
-	_load_ucode_intel_bsp(
-			(struct mc_saved_data *)__pa_nodebug(&mc_saved_data),
-			(unsigned long *)__pa_nodebug(&mc_saved_in_initrd),
-			start, size);
+	/*
+	 * Set start only if we have an initrd image. We cannot use initrd_start
+	 * because it is not set that early yet.
+	 */
+	start	= (size ? p->hdr.ramdisk_image : 0);
+
+	_load_ucode_intel_bsp((struct mc_saved_data *)__pa_nodebug(&mc_saved_data),
+			      (unsigned long *)__pa_nodebug(&mc_saved_in_initrd),
+			      start, size);
 #else
-	start	= boot_params.hdr.ramdisk_image + PAGE_OFFSET;
 	size	= boot_params.hdr.ramdisk_size;
+	start	= (size ? boot_params.hdr.ramdisk_image + PAGE_OFFSET : 0);
 
 	_load_ucode_intel_bsp(&mc_saved_data, mc_saved_in_initrd, start, size);
 #endif
@@ -748,20 +756,14 @@ void load_ucode_intel_ap(void)
 	struct mc_saved_data *mc_saved_data_p;
 	struct ucode_cpu_info uci;
 	unsigned long *mc_saved_in_initrd_p;
-	unsigned long initrd_start_addr;
 	enum ucode_state ret;
 #ifdef CONFIG_X86_32
-	unsigned long *initrd_start_p;
 
-	mc_saved_in_initrd_p =
-		(unsigned long *)__pa_nodebug(mc_saved_in_initrd);
+	mc_saved_in_initrd_p = (unsigned long *)__pa_nodebug(mc_saved_in_initrd);
 	mc_saved_data_p = (struct mc_saved_data *)__pa_nodebug(&mc_saved_data);
-	initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start);
-	initrd_start_addr = (unsigned long)__pa_nodebug(*initrd_start_p);
 #else
-	mc_saved_data_p = &mc_saved_data;
 	mc_saved_in_initrd_p = mc_saved_in_initrd;
-	initrd_start_addr = initrd_start;
+	mc_saved_data_p = &mc_saved_data;
 #endif
 
 	/*
@@ -773,7 +775,7 @@ void load_ucode_intel_ap(void)
 
 	collect_cpu_info_early(&uci);
 	ret = load_microcode(mc_saved_data_p, mc_saved_in_initrd_p,
-			     initrd_start_addr, &uci);
+			     get_initrd_start_addr(), &uci);
 
 	if (ret != UCODE_OK)
 		return;
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 1b443db2d..6532f5b40 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -596,6 +596,19 @@ void x86_pmu_disable_all(void)
 	}
 }
 
+/*
+ * There may be PMI landing after enabled=0. The PMI hitting could be before or
+ * after disable_all.
+ *
+ * If PMI hits before disable_all, the PMU will be disabled in the NMI handler.
+ * It will not be re-enabled in the NMI handler again, because enabled=0. After
+ * handling the NMI, disable_all will be called, which will not change the
+ * state either. If PMI hits after disable_all, the PMU is already disabled
+ * before entering NMI handler. The NMI handler will not change the state
+ * either.
+ *
+ * So either situation is harmless.
+ */
 static void x86_pmu_disable(struct pmu *pmu)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 7bb61e32f..98be6d6d3 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -586,6 +586,7 @@ struct x86_pmu {
 			pebs_broken	:1,
 			pebs_prec_dist	:1;
 	int		pebs_record_size;
+	int		pebs_buffer_size;
 	void		(*drain_pebs)(struct pt_regs *regs);
 	struct event_constraint *pebs_constraints;
 	void		(*pebs_aliases)(struct perf_event *event);
@@ -904,6 +905,8 @@ void intel_pmu_lbr_init_skl(void);
 
 void intel_pmu_lbr_init_knl(void);
 
+void intel_pmu_pebs_data_source_nhm(void);
+
 int intel_pmu_setup_lbr_filter(struct perf_event *event);
 
 void intel_pt_interrupt(void);
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index fed2ab1f1..760aec1e8 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -1502,7 +1502,15 @@ static __initconst const u64 knl_hw_cache_extra_regs
 };
 
 /*
- * Use from PMIs where the LBRs are already disabled.
+ * Used from PMIs where the LBRs are already disabled.
+ *
+ * This function could be called consecutively. It is required to remain in
+ * disabled state if called consecutively.
+ *
+ * During consecutive calls, the same disable value will be written to related
+ * registers, so the PMU state remains unchanged. hw.state in
+ * intel_bts_disable_local will remain PERF_HES_STOPPED too in consecutive
+ * calls.
  */
 static void __intel_pmu_disable_all(void)
 {
@@ -1884,6 +1892,16 @@ again:
 	if (__test_and_clear_bit(62, (unsigned long *)&status)) {
 		handled++;
 		x86_pmu.drain_pebs(regs);
+		/*
+		 * There are cases where, even though, the PEBS ovfl bit is set
+		 * in GLOBAL_OVF_STATUS, the PEBS events may also have their
+		 * overflow bits set for their counters. We must clear them
+		 * here because they have been processed as exact samples in
+		 * the drain_pebs() routine. They must not be processed again
+		 * in the for_each_bit_set() loop for regular samples below.
+		 */
+		status &= ~cpuc->pebs_enabled;
+		status &= x86_pmu.intel_ctrl | GLOBAL_STATUS_TRACE_TOPAPMI;
 	}
 
 	/*
@@ -1929,7 +1947,10 @@ again:
 		goto again;
 
 done:
-	__intel_pmu_enable_all(0, true);
+	/* Only restore PMU state when it's active. See x86_pmu_disable(). */
+	if (cpuc->enabled)
+		__intel_pmu_enable_all(0, true);
+
 	/*
 	 * Only unmask the NMI after the overflow counters
 	 * have been reset. This avoids spurious NMIs on
@@ -3396,6 +3417,7 @@ __init int intel_pmu_init(void)
 		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] =
 			X86_CONFIG(.event=0xb1, .umask=0x3f, .inv=1, .cmask=1);
 
+		intel_pmu_pebs_data_source_nhm();
 		x86_add_quirk(intel_nehalem_quirk);
 
 		pr_cont("Nehalem events, ");
@@ -3459,6 +3481,7 @@ __init int intel_pmu_init(void)
 		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] =
 			X86_CONFIG(.event=0xb1, .umask=0x3f, .inv=1, .cmask=1);
 
+		intel_pmu_pebs_data_source_nhm();
 		pr_cont("Westmere events, ");
 		break;
 
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 10602f0a4..955140140 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -51,7 +51,8 @@ union intel_x86_pebs_dse {
 #define OP_LH (P(OP, LOAD) | P(LVL, HIT))
 #define SNOOP_NONE_MISS (P(SNOOP, NONE) | P(SNOOP, MISS))
 
-static const u64 pebs_data_source[] = {
+/* Version for Sandy Bridge and later */
+static u64 pebs_data_source[] = {
 	P(OP, LOAD) | P(LVL, MISS) | P(LVL, L3) | P(SNOOP, NA),/* 0x00:ukn L3 */
 	OP_LH | P(LVL, L1)  | P(SNOOP, NONE),	/* 0x01: L1 local */
 	OP_LH | P(LVL, LFB) | P(SNOOP, NONE),	/* 0x02: LFB hit */
@@ -70,6 +71,14 @@ static const u64 pebs_data_source[] = {
 	OP_LH | P(LVL, UNC) | P(SNOOP, NONE), /* 0x0f: uncached */
 };
 
+/* Patch up minor differences in the bits */
+void __init intel_pmu_pebs_data_source_nhm(void)
+{
+	pebs_data_source[0x05] = OP_LH | P(LVL, L3)  | P(SNOOP, HIT);
+	pebs_data_source[0x06] = OP_LH | P(LVL, L3)  | P(SNOOP, HITM);
+	pebs_data_source[0x07] = OP_LH | P(LVL, L3)  | P(SNOOP, HITM);
+}
+
 static u64 precise_store_data(u64 status)
 {
 	union intel_x86_pebs_dse dse;
@@ -269,7 +278,7 @@ static int alloc_pebs_buffer(int cpu)
 	if (!x86_pmu.pebs)
 		return 0;
 
-	buffer = kzalloc_node(PEBS_BUFFER_SIZE, GFP_KERNEL, node);
+	buffer = kzalloc_node(x86_pmu.pebs_buffer_size, GFP_KERNEL, node);
 	if (unlikely(!buffer))
 		return -ENOMEM;
 
@@ -286,7 +295,7 @@ static int alloc_pebs_buffer(int cpu)
 		per_cpu(insn_buffer, cpu) = ibuffer;
 	}
 
-	max = PEBS_BUFFER_SIZE / x86_pmu.pebs_record_size;
+	max = x86_pmu.pebs_buffer_size / x86_pmu.pebs_record_size;
 
 	ds->pebs_buffer_base = (u64)(unsigned long)buffer;
 	ds->pebs_index = ds->pebs_buffer_base;
@@ -1319,6 +1328,7 @@ void __init intel_ds_init(void)
 
 	x86_pmu.bts  = boot_cpu_has(X86_FEATURE_BTS);
 	x86_pmu.pebs = boot_cpu_has(X86_FEATURE_PEBS);
+	x86_pmu.pebs_buffer_size = PEBS_BUFFER_SIZE;
 	if (x86_pmu.pebs) {
 		char pebs_type = x86_pmu.intel_cap.pebs_trap ?  '+' : '-';
 		int format = x86_pmu.intel_cap.pebs_format;
@@ -1327,6 +1337,14 @@ void __init intel_ds_init(void)
 		case 0:
 			printk(KERN_CONT "PEBS fmt0%c, ", pebs_type);
 			x86_pmu.pebs_record_size = sizeof(struct pebs_record_core);
+			/*
+			 * Using >PAGE_SIZE buffers makes the WRMSR to
+			 * PERF_GLOBAL_CTRL in intel_pmu_enable_all()
+			 * mysteriously hang on Core2.
+			 *
+			 * As a workaround, we don't do this.
+			 */
+			x86_pmu.pebs_buffer_size = PAGE_SIZE;
 			x86_pmu.drain_pebs = intel_pmu_drain_pebs_core;
 			break;
 
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore_snbep.c b/arch/x86/kernel/cpu/perf_event_intel_uncore_snbep.c
index 33acb884c..4547b2cca 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore_snbep.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore_snbep.c
@@ -2875,11 +2875,13 @@ static struct intel_uncore_type bdx_uncore_sbox = {
 	.format_group		= &hswep_uncore_sbox_format_group,
 };
 
+#define BDX_MSR_UNCORE_SBOX	3
+
 static struct intel_uncore_type *bdx_msr_uncores[] = {
 	&bdx_uncore_ubox,
 	&bdx_uncore_cbox,
-	&bdx_uncore_sbox,
 	&hswep_uncore_pcu,
+	&bdx_uncore_sbox,
 	NULL,
 };
 
@@ -2888,6 +2890,10 @@ void bdx_uncore_cpu_init(void)
 	if (bdx_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores)
 		bdx_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores;
 	uncore_msr_uncores = bdx_msr_uncores;
+
+	/* BDX-DE doesn't have SBOX */
+	if (boot_cpu_data.x86_model == 86)
+		uncore_msr_uncores[BDX_MSR_UNCORE_SBOX] = NULL;
 }
 
 static struct intel_uncore_type bdx_uncore_ha = {
diff --git a/arch/x86/kernel/cpu/perf_event_knc.c b/arch/x86/kernel/cpu/perf_event_knc.c
index 5b0c232d1..b931095e8 100644
--- a/arch/x86/kernel/cpu/perf_event_knc.c
+++ b/arch/x86/kernel/cpu/perf_event_knc.c
@@ -263,7 +263,9 @@ again:
 		goto again;
 
 done:
-	knc_pmu_enable_all(0);
+	/* Only restore PMU state when it's active. See x86_pmu_disable(). */
+	if (cpuc->enabled)
+		knc_pmu_enable_all(0);
 
 	return handled;
 }
diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c
index 37dae792d..435466fbd 100644
--- a/arch/x86/kernel/ioport.c
+++ b/arch/x86/kernel/ioport.c
@@ -28,8 +28,18 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
 
 	if ((from + num <= from) || (from + num > IO_BITMAP_BITS))
 		return -EINVAL;
+#ifdef CONFIG_SCHED_BFS_AUTOISO
+	if (turn_on) {
+		struct sched_param param = { .sched_priority = 0 };
+		if (!capable(CAP_SYS_RAWIO))
+			return -EPERM;
+		/* Start X as SCHED_ISO */
+		sched_setscheduler_nocheck(current, SCHED_ISO, &param);
+	}
+#else
 	if (turn_on && !capable(CAP_SYS_RAWIO))
 		return -EPERM;
+#endif
 
 	/*
 	 * If it's the first ioperm() call in this thread's lifetime, set the
@@ -96,18 +106,31 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
 SYSCALL_DEFINE1(iopl, unsigned int, level)
 {
 	struct pt_regs *regs = current_pt_regs();
-	unsigned int old = (regs->flags >> 12) & 3;
 	struct thread_struct *t = &current->thread;
 
+	/*
+	 * Careful: the IOPL bits in regs->flags are undefined under Xen PV
+	 * and changing them has no effect.
+	 */
+	unsigned int old = t->iopl >> X86_EFLAGS_IOPL_BIT;
+
 	if (level > 3)
 		return -EINVAL;
 	/* Trying to gain more privileges? */
 	if (level > old) {
+#ifdef CONFIG_SCHED_BFS_AUTOISO
+		struct sched_param param = { .sched_priority = 0 };
+#endif
 		if (!capable(CAP_SYS_RAWIO))
 			return -EPERM;
+#ifdef CONFIG_SCHED_BFS_AUTOISO
+		/* Start X as SCHED_ISO */
+		sched_setscheduler_nocheck(current, SCHED_ISO, &param);
+#endif
 	}
-	regs->flags = (regs->flags & ~X86_EFLAGS_IOPL) | (level << 12);
-	t->iopl = level << 12;
+	regs->flags = (regs->flags & ~X86_EFLAGS_IOPL) |
+		(level << X86_EFLAGS_IOPL_BIT);
+	t->iopl = level << X86_EFLAGS_IOPL_BIT;
 	set_iopl_mask(t->iopl);
 
 	return 0;
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index b9d99e0f8..9f7518760 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -48,6 +48,7 @@
 #include <asm/syscalls.h>
 #include <asm/debugreg.h>
 #include <asm/switch_to.h>
+#include <asm/xen/hypervisor.h>
 
 asmlinkage extern void ret_from_fork(void);
 
@@ -411,6 +412,17 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		     task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
 		__switch_to_xtra(prev_p, next_p, tss);
 
+#ifdef CONFIG_XEN
+	/*
+	 * On Xen PV, IOPL bits in pt_regs->flags have no effect, and
+	 * current_pt_regs()->flags may not match the current task's
+	 * intended IOPL.  We need to switch it manually.
+	 */
+	if (unlikely(static_cpu_has(X86_FEATURE_XENPV) &&
+		     prev->iopl != next->iopl))
+		xen_set_iopl_mask(next->iopl);
+#endif
+
 	if (static_cpu_has_bug(X86_BUG_SYSRET_SS_ATTRS)) {
 		/*
 		 * AMD CPUs have a misfeature: SYSRET sets the SS selector but
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index b0ea42b78..ab5318727 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -245,7 +245,7 @@ static void kvm_pit_ack_irq(struct kvm_irq_ack_notifier *kian)
 		 * PIC is being reset.  Handle it gracefully here
 		 */
 		atomic_inc(&ps->pending);
-	else if (value > 0)
+	else if (value > 0 && ps->reinject)
 		/* in this case, we had multiple outstanding pit interrupts
 		 * that we needed to inject.  Reinject
 		 */
@@ -288,7 +288,9 @@ static void pit_do_work(struct kthread_work *work)
 	 * last one has been acked.
 	 */
 	spin_lock(&ps->inject_lock);
-	if (ps->irq_ack) {
+	if (!ps->reinject)
+		inject = 1;
+	else if (ps->irq_ack) {
 		ps->irq_ack = 0;
 		inject = 1;
 	}
@@ -317,10 +319,10 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
 	struct kvm_kpit_state *ps = container_of(data, struct kvm_kpit_state, timer);
 	struct kvm_pit *pt = ps->kvm->arch.vpit;
 
-	if (ps->reinject || !atomic_read(&ps->pending)) {
+	if (ps->reinject)
 		atomic_inc(&ps->pending);
-		queue_kthread_work(&pt->worker, &pt->expired);
-	}
+
+	queue_kthread_work(&pt->worker, &pt->expired);
 
 	if (ps->is_periodic) {
 		hrtimer_add_expires_ns(&ps->timer, ps->period);
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 9bd8f44ba..539062e24 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2702,8 +2702,15 @@ static void nested_vmx_setup_ctls_msrs(struct vcpu_vmx *vmx)
 	} else
 		vmx->nested.nested_vmx_ept_caps = 0;
 
+	/*
+	 * Old versions of KVM use the single-context version without
+	 * checking for support, so declare that it is supported even
+	 * though it is treated as global context.  The alternative is
+	 * not failing the single-context invvpid, and it is worse.
+	 */
 	if (enable_vpid)
 		vmx->nested.nested_vmx_vpid_caps = VMX_VPID_INVVPID_BIT |
+				VMX_VPID_EXTENT_SINGLE_CONTEXT_BIT |
 				VMX_VPID_EXTENT_GLOBAL_CONTEXT_BIT;
 	else
 		vmx->nested.nested_vmx_vpid_caps = 0;
@@ -7398,6 +7405,7 @@ static int handle_invept(struct kvm_vcpu *vcpu)
 	if (!(types & (1UL << type))) {
 		nested_vmx_failValid(vcpu,
 				VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
+		skip_emulated_instruction(vcpu);
 		return 1;
 	}
 
@@ -7456,6 +7464,7 @@ static int handle_invvpid(struct kvm_vcpu *vcpu)
 	if (!(types & (1UL << type))) {
 		nested_vmx_failValid(vcpu,
 			VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
+		skip_emulated_instruction(vcpu);
 		return 1;
 	}
 
@@ -7472,12 +7481,17 @@ static int handle_invvpid(struct kvm_vcpu *vcpu)
 	}
 
 	switch (type) {
+	case VMX_VPID_EXTENT_SINGLE_CONTEXT:
+		/*
+		 * Old versions of KVM use the single-context version so we
+		 * have to support it; just treat it the same as all-context.
+		 */
 	case VMX_VPID_EXTENT_ALL_CONTEXT:
 		__vmx_flush_tlb(vcpu, to_vmx(vcpu)->nested.vpid02);
 		nested_vmx_succeed(vcpu);
 		break;
 	default:
-		/* Trap single context invalidation invvpid calls */
+		/* Trap individual address invalidation invvpid calls */
 		BUG_ON(1);
 		break;
 	}
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index eaf6ee8c2..d47d231e0 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2752,6 +2752,7 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	}
 
 	kvm_make_request(KVM_REQ_STEAL_UPDATE, vcpu);
+	vcpu->arch.switch_db_regs |= KVM_DEBUGREG_RELOAD;
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 8f4cc3dfa..5fb6adaaa 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -106,8 +106,6 @@ static void flush_tlb_func(void *info)
 
 	if (f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
 		return;
-	if (!f->flush_end)
-		f->flush_end = f->flush_start + PAGE_SIZE;
 
 	count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
 	if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
@@ -135,12 +133,20 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 				 unsigned long end)
 {
 	struct flush_tlb_info info;
+
+	if (end == 0)
+		end = start + PAGE_SIZE;
 	info.flush_mm = mm;
 	info.flush_start = start;
 	info.flush_end = end;
 
 	count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
-	trace_tlb_flush(TLB_REMOTE_SEND_IPI, end - start);
+	if (end == TLB_FLUSH_ALL)
+		trace_tlb_flush(TLB_REMOTE_SEND_IPI, TLB_FLUSH_ALL);
+	else
+		trace_tlb_flush(TLB_REMOTE_SEND_IPI,
+				(end - start) >> PAGE_SHIFT);
+
 	if (is_uv_system()) {
 		unsigned int cpu;
 
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index e58565556..0ae7e9fa3 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -540,3 +540,10 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev)
         }
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
+
+static void pci_bdwep_bar(struct pci_dev *dev)
+{
+	dev->non_compliant_bars = 1;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar);
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index d09e4c9d7..e3679db17 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -961,7 +961,7 @@ static void xen_load_sp0(struct tss_struct *tss,
 	tss->x86_tss.sp0 = thread->sp0;
 }
 
-static void xen_set_iopl_mask(unsigned mask)
+void xen_set_iopl_mask(unsigned mask)
 {
 	struct physdev_set_iopl set_iopl;
 
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index 9ed55649a..05e1df943 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -128,7 +128,7 @@ ENTRY(_startup)
 	wsr	a0, icountlevel
 
 	.set	_index, 0
-	.rept	XCHAL_NUM_DBREAK - 1
+	.rept	XCHAL_NUM_DBREAK
 	wsr	a0, SREG_DBREAKC + _index
 	.set	_index, _index + 1
 	.endr
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
index d75aa1476..1a804a2f9 100644
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -97,11 +97,11 @@ void clear_user_highpage(struct page *page, unsigned long vaddr)
 	unsigned long paddr;
 	void *kvaddr = coherent_kvaddr(page, TLBTEMP_BASE_1, vaddr, &paddr);
 
-	pagefault_disable();
+	preempt_disable();
 	kmap_invalidate_coherent(page, vaddr);
 	set_bit(PG_arch_1, &page->flags);
 	clear_page_alias(kvaddr, paddr);
-	pagefault_enable();
+	preempt_enable();
 }
 
 void copy_user_highpage(struct page *dst, struct page *src,
@@ -113,11 +113,11 @@ void copy_user_highpage(struct page *dst, struct page *src,
 	void *src_vaddr = coherent_kvaddr(src, TLBTEMP_BASE_2, vaddr,
 					  &src_paddr);
 
-	pagefault_disable();
+	preempt_disable();
 	kmap_invalidate_coherent(dst, vaddr);
 	set_bit(PG_arch_1, &dst->flags);
 	copy_page_alias(dst_vaddr, src_vaddr, dst_paddr, src_paddr);
-	pagefault_enable();
+	preempt_enable();
 }
 
 #endif /* DCACHE_WAY_SIZE > PAGE_SIZE */
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index 70cb408bc..92d785fef 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -100,21 +100,23 @@ static void rs_poll(unsigned long priv)
 {
 	struct tty_port *port = (struct tty_port *)priv;
 	int i = 0;
+	int rd = 1;
 	unsigned char c;
 
 	spin_lock(&timer_lock);
 
 	while (simc_poll(0)) {
-		simc_read(0, &c, 1);
+		rd = simc_read(0, &c, 1);
+		if (rd <= 0)
+			break;
 		tty_insert_flip_char(port, c, TTY_NORMAL);
 		i++;
 	}
 
 	if (i)
 		tty_flip_buffer_push(port);
-
-
-	mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
+	if (rd)
+		mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
 	spin_unlock(&timer_lock);
 }