Initial import

1 files changed, 167 insertions, 0 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
new file mode 100644
index 000000000..46d2554be
--- /dev/null
+++ b/drivers/Makefile
@@ -0,0 +1,167 @@
+#
+# Makefile for the Linux kernel device drivers.
+#
+# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
+# Rewritten to use lists instead of if-statements.
+#
+
+obj-y				+= irqchip/
+obj-y				+= bus/
+
+obj-$(CONFIG_GENERIC_PHY)	+= phy/
+
+# GPIO must come after pinctrl as gpios may need to mux pins etc
+obj-y				+= pinctrl/
+obj-y				+= gpio/
+obj-y				+= pwm/
+obj-$(CONFIG_PCI)		+= pci/
+obj-$(CONFIG_PARISC)		+= parisc/
+obj-$(CONFIG_RAPIDIO)		+= rapidio/
+obj-y				+= video/
+obj-y				+= idle/
+
+# IPMI must come before ACPI in order to provide IPMI opregion support
+obj-$(CONFIG_IPMI_HANDLER)	+= char/ipmi/
+
+obj-$(CONFIG_ACPI)		+= acpi/
+obj-$(CONFIG_SFI)		+= sfi/
+# PnP must come after ACPI since it will eventually need to check if acpi
+# was used and do nothing if so
+obj-$(CONFIG_PNP)		+= pnp/
+obj-y				+= amba/
+# Many drivers will want to use DMA so this has to be made available
+# really early.
+obj-$(CONFIG_DMADEVICES)	+= dma/
+
+# SOC specific infrastructure drivers.
+obj-y				+= soc/
+
+obj-$(CONFIG_VIRTIO)		+= virtio/
+obj-$(CONFIG_XEN)		+= xen/
+
+# regulators early, since some subsystems rely on them to initialize
+obj-$(CONFIG_REGULATOR)		+= regulator/
+
+# reset controllers early, since gpu drivers might rely on them to initialize
+obj-$(CONFIG_RESET_CONTROLLER)	+= reset/
+
+# tty/ comes before char/ so that the VT console is the boot-time
+# default.
+obj-y				+= tty/
+obj-y				+= char/
+
+# iommu/ comes before gpu as gpu are using iommu controllers
+obj-$(CONFIG_IOMMU_SUPPORT)	+= iommu/
+
+# gpu/ comes after char for AGP vs DRM startup and after iommu
+obj-y				+= gpu/
+
+obj-$(CONFIG_CONNECTOR)		+= connector/
+
+# i810fb and intelfb depend on char/agp/
+obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
+obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
+
+obj-$(CONFIG_PARPORT)		+= parport/
+obj-y				+= base/ block/ misc/ mfd/ nfc/
+obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
+obj-$(CONFIG_NUBUS)		+= nubus/
+obj-y				+= macintosh/
+obj-$(CONFIG_IDE)		+= ide/
+obj-$(CONFIG_SCSI)		+= scsi/
+obj-$(CONFIG_ATA)		+= ata/
+obj-$(CONFIG_TARGET_CORE)	+= target/
+obj-$(CONFIG_MTD)		+= mtd/
+obj-$(CONFIG_SPI)		+= spi/
+obj-$(CONFIG_SPMI)		+= spmi/
+obj-y				+= hsi/
+obj-y				+= net/
+obj-$(CONFIG_ATM)		+= atm/
+obj-$(CONFIG_FUSION)		+= message/
+obj-y				+= firewire/
+obj-$(CONFIG_UIO)		+= uio/
+obj-$(CONFIG_VFIO)		+= vfio/
+obj-y				+= cdrom/
+obj-y				+= auxdisplay/
+obj-$(CONFIG_PCCARD)		+= pcmcia/
+obj-$(CONFIG_DIO)		+= dio/
+obj-$(CONFIG_SBUS)		+= sbus/
+obj-$(CONFIG_ZORRO)		+= zorro/
+obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
+obj-$(CONFIG_PARIDE) 		+= block/paride/
+obj-$(CONFIG_TC)		+= tc/
+obj-$(CONFIG_UWB)		+= uwb/
+obj-$(CONFIG_USB_PHY)		+= usb/
+obj-$(CONFIG_USB)		+= usb/
+obj-$(CONFIG_PCI)		+= usb/
+obj-$(CONFIG_USB_GADGET)	+= usb/
+obj-$(CONFIG_SERIO)		+= input/serio/
+obj-$(CONFIG_GAMEPORT)		+= input/gameport/
+obj-$(CONFIG_INPUT)		+= input/
+obj-$(CONFIG_I2O)		+= message/
+obj-$(CONFIG_RTC_LIB)		+= rtc/
+obj-y				+= i2c/ media/
+obj-$(CONFIG_PPS)		+= pps/
+obj-$(CONFIG_PTP_1588_CLOCK)	+= ptp/
+obj-$(CONFIG_W1)		+= w1/
+obj-$(CONFIG_POWER_SUPPLY)	+= power/
+obj-$(CONFIG_HWMON)		+= hwmon/
+obj-$(CONFIG_THERMAL)		+= thermal/
+obj-$(CONFIG_WATCHDOG)		+= watchdog/
+obj-$(CONFIG_MD)		+= md/
+obj-$(CONFIG_BT)		+= bluetooth/
+obj-$(CONFIG_ACCESSIBILITY)	+= accessibility/
+obj-$(CONFIG_ISDN)		+= isdn/
+obj-$(CONFIG_EDAC)		+= edac/
+obj-$(CONFIG_EISA)		+= eisa/
+obj-y				+= lguest/
+obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
+obj-$(CONFIG_CPU_IDLE)		+= cpuidle/
+obj-y				+= mmc/
+obj-$(CONFIG_MEMSTICK)		+= memstick/
+obj-y				+= leds/
+obj-$(CONFIG_INFINIBAND)	+= infiniband/
+obj-$(CONFIG_SGI_SN)		+= sn/
+obj-y				+= firmware/
+obj-$(CONFIG_CRYPTO)		+= crypto/
+obj-$(CONFIG_SUPERH)		+= sh/
+obj-$(CONFIG_ARCH_SHMOBILE)	+= sh/
+ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
+obj-y				+= clocksource/
+endif
+obj-$(CONFIG_DCA)		+= dca/
+obj-$(CONFIG_HID)		+= hid/
+obj-$(CONFIG_PPC_PS3)		+= ps3/
+obj-$(CONFIG_OF)		+= of/
+obj-$(CONFIG_SSB)		+= ssb/
+obj-$(CONFIG_BCMA)		+= bcma/
+obj-$(CONFIG_VHOST_RING)	+= vhost/
+obj-$(CONFIG_VLYNQ)		+= vlynq/
+obj-$(CONFIG_STAGING)		+= staging/
+obj-y				+= platform/
+#common clk code
+obj-y				+= clk/
+
+obj-$(CONFIG_MAILBOX)		+= mailbox/
+obj-$(CONFIG_HWSPINLOCK)	+= hwspinlock/
+obj-$(CONFIG_REMOTEPROC)	+= remoteproc/
+obj-$(CONFIG_RPMSG)		+= rpmsg/
+
+# Virtualization drivers
+obj-$(CONFIG_VIRT_DRIVERS)	+= virt/
+obj-$(CONFIG_HYPERV)		+= hv/
+
+obj-$(CONFIG_PM_DEVFREQ)	+= devfreq/
+obj-$(CONFIG_EXTCON)		+= extcon/
+obj-$(CONFIG_MEMORY)		+= memory/
+obj-$(CONFIG_IIO)		+= iio/
+obj-$(CONFIG_VME_BUS)		+= vme/
+obj-$(CONFIG_IPACK_BUS)		+= ipack/
+obj-$(CONFIG_NTB)		+= ntb/
+obj-$(CONFIG_FMC)		+= fmc/
+obj-$(CONFIG_POWERCAP)		+= powercap/
+obj-$(CONFIG_MCB)		+= mcb/
+obj-$(CONFIG_RAS)		+= ras/
+obj-$(CONFIG_THUNDERBOLT)	+= thunderbolt/
+obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight/
+obj-$(CONFIG_ANDROID)		+= android/