Initial import

1 files changed, 557 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c
new file mode 100644
index 000000000..a7eee2400
--- /dev/null
+++ b/drivers/acpi/acpica/exstore.c
@@ -0,0 +1,557 @@
+/******************************************************************************
+ *
+ * Module Name: exstore - AML Interpreter object store support
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2015, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acdispat.h"
+#include "acinterp.h"
+#include "amlcode.h"
+#include "acnamesp.h"
+
+#define _COMPONENT          ACPI_EXECUTER
+ACPI_MODULE_NAME("exstore")
+
+/* Local prototypes */
+static acpi_status
+acpi_ex_store_object_to_index(union acpi_operand_object *val_desc,
+			      union acpi_operand_object *dest_desc,
+			      struct acpi_walk_state *walk_state);
+
+static acpi_status
+acpi_ex_store_direct_to_node(union acpi_operand_object *source_desc,
+			     struct acpi_namespace_node *node,
+			     struct acpi_walk_state *walk_state);
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store
+ *
+ * PARAMETERS:  *source_desc        - Value to be stored
+ *              *dest_desc          - Where to store it. Must be an NS node
+ *                                    or union acpi_operand_object of type
+ *                                    Reference;
+ *              walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Store the value described by source_desc into the location
+ *              described by dest_desc. Called by various interpreter
+ *              functions to store the result of an operation into
+ *              the destination operand -- not just simply the actual "Store"
+ *              ASL operator.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_store(union acpi_operand_object *source_desc,
+	      union acpi_operand_object *dest_desc,
+	      struct acpi_walk_state *walk_state)
+{
+	acpi_status status = AE_OK;
+	union acpi_operand_object *ref_desc = dest_desc;
+
+	ACPI_FUNCTION_TRACE_PTR(ex_store, dest_desc);
+
+	/* Validate parameters */
+
+	if (!source_desc || !dest_desc) {
+		ACPI_ERROR((AE_INFO, "Null parameter"));
+		return_ACPI_STATUS(AE_AML_NO_OPERAND);
+	}
+
+	/* dest_desc can be either a namespace node or an ACPI object */
+
+	if (ACPI_GET_DESCRIPTOR_TYPE(dest_desc) == ACPI_DESC_TYPE_NAMED) {
+		/*
+		 * Dest is a namespace node,
+		 * Storing an object into a Named node.
+		 */
+		status = acpi_ex_store_object_to_node(source_desc,
+						      (struct
+						       acpi_namespace_node *)
+						      dest_desc, walk_state,
+						      ACPI_IMPLICIT_CONVERSION);
+
+		return_ACPI_STATUS(status);
+	}
+
+	/* Destination object must be a Reference or a Constant object */
+
+	switch (dest_desc->common.type) {
+	case ACPI_TYPE_LOCAL_REFERENCE:
+
+		break;
+
+	case ACPI_TYPE_INTEGER:
+
+		/* Allow stores to Constants -- a Noop as per ACPI spec */
+
+		if (dest_desc->common.flags & AOPOBJ_AML_CONSTANT) {
+			return_ACPI_STATUS(AE_OK);
+		}
+
+		/*lint -fallthrough */
+
+	default:
+
+		/* Destination is not a Reference object */
+
+		ACPI_ERROR((AE_INFO,
+			    "Target is not a Reference or Constant object - %s [%p]",
+			    acpi_ut_get_object_type_name(dest_desc),
+			    dest_desc));
+
+		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+	}
+
+	/*
+	 * Examine the Reference class. These cases are handled:
+	 *
+	 * 1) Store to Name (Change the object associated with a name)
+	 * 2) Store to an indexed area of a Buffer or Package
+	 * 3) Store to a Method Local or Arg
+	 * 4) Store to the debug object
+	 */
+	switch (ref_desc->reference.class) {
+	case ACPI_REFCLASS_REFOF:
+
+		/* Storing an object into a Name "container" */
+
+		status = acpi_ex_store_object_to_node(source_desc,
+						      ref_desc->reference.
+						      object, walk_state,
+						      ACPI_IMPLICIT_CONVERSION);
+		break;
+
+	case ACPI_REFCLASS_INDEX:
+
+		/* Storing to an Index (pointer into a packager or buffer) */
+
+		status =
+		    acpi_ex_store_object_to_index(source_desc, ref_desc,
+						  walk_state);
+		break;
+
+	case ACPI_REFCLASS_LOCAL:
+	case ACPI_REFCLASS_ARG:
+
+		/* Store to a method local/arg  */
+
+		status =
+		    acpi_ds_store_object_to_local(ref_desc->reference.class,
+						  ref_desc->reference.value,
+						  source_desc, walk_state);
+		break;
+
+	case ACPI_REFCLASS_DEBUG:
+		/*
+		 * Storing to the Debug object causes the value stored to be
+		 * displayed and otherwise has no effect -- see ACPI Specification
+		 */
+		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+				  "**** Write to Debug Object: Object %p %s ****:\n\n",
+				  source_desc,
+				  acpi_ut_get_object_type_name(source_desc)));
+
+		ACPI_DEBUG_OBJECT(source_desc, 0, 0);
+		break;
+
+	default:
+
+		ACPI_ERROR((AE_INFO, "Unknown Reference Class 0x%2.2X",
+			    ref_desc->reference.class));
+		ACPI_DUMP_ENTRY(ref_desc, ACPI_LV_INFO);
+
+		status = AE_AML_INTERNAL;
+		break;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store_object_to_index
+ *
+ * PARAMETERS:  *source_desc            - Value to be stored
+ *              *dest_desc              - Named object to receive the value
+ *              walk_state              - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Store the object to indexed Buffer or Package element
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ex_store_object_to_index(union acpi_operand_object *source_desc,
+			      union acpi_operand_object *index_desc,
+			      struct acpi_walk_state *walk_state)
+{
+	acpi_status status = AE_OK;
+	union acpi_operand_object *obj_desc;
+	union acpi_operand_object *new_desc;
+	u8 value = 0;
+	u32 i;
+
+	ACPI_FUNCTION_TRACE(ex_store_object_to_index);
+
+	/*
+	 * Destination must be a reference pointer, and
+	 * must point to either a buffer or a package
+	 */
+	switch (index_desc->reference.target_type) {
+	case ACPI_TYPE_PACKAGE:
+		/*
+		 * Storing to a package element. Copy the object and replace
+		 * any existing object with the new object. No implicit
+		 * conversion is performed.
+		 *
+		 * The object at *(index_desc->Reference.Where) is the
+		 * element within the package that is to be modified.
+		 * The parent package object is at index_desc->Reference.Object
+		 */
+		obj_desc = *(index_desc->reference.where);
+
+		if (source_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE &&
+		    source_desc->reference.class == ACPI_REFCLASS_TABLE) {
+
+			/* This is a DDBHandle, just add a reference to it */
+
+			acpi_ut_add_reference(source_desc);
+			new_desc = source_desc;
+		} else {
+			/* Normal object, copy it */
+
+			status =
+			    acpi_ut_copy_iobject_to_iobject(source_desc,
+							    &new_desc,
+							    walk_state);
+			if (ACPI_FAILURE(status)) {
+				return_ACPI_STATUS(status);
+			}
+		}
+
+		if (obj_desc) {
+
+			/* Decrement reference count by the ref count of the parent package */
+
+			for (i = 0; i < ((union acpi_operand_object *)
+					 index_desc->reference.object)->common.
+			     reference_count; i++) {
+				acpi_ut_remove_reference(obj_desc);
+			}
+		}
+
+		*(index_desc->reference.where) = new_desc;
+
+		/* Increment ref count by the ref count of the parent package-1 */
+
+		for (i = 1; i < ((union acpi_operand_object *)
+				 index_desc->reference.object)->common.
+		     reference_count; i++) {
+			acpi_ut_add_reference(new_desc);
+		}
+
+		break;
+
+	case ACPI_TYPE_BUFFER_FIELD:
+		/*
+		 * Store into a Buffer or String (not actually a real buffer_field)
+		 * at a location defined by an Index.
+		 *
+		 * The first 8-bit element of the source object is written to the
+		 * 8-bit Buffer location defined by the Index destination object,
+		 * according to the ACPI 2.0 specification.
+		 */
+
+		/*
+		 * Make sure the target is a Buffer or String. An error should
+		 * not happen here, since the reference_object was constructed
+		 * by the INDEX_OP code.
+		 */
+		obj_desc = index_desc->reference.object;
+		if ((obj_desc->common.type != ACPI_TYPE_BUFFER) &&
+		    (obj_desc->common.type != ACPI_TYPE_STRING)) {
+			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+		}
+
+		/*
+		 * The assignment of the individual elements will be slightly
+		 * different for each source type.
+		 */
+		switch (source_desc->common.type) {
+		case ACPI_TYPE_INTEGER:
+
+			/* Use the least-significant byte of the integer */
+
+			value = (u8) (source_desc->integer.value);
+			break;
+
+		case ACPI_TYPE_BUFFER:
+		case ACPI_TYPE_STRING:
+
+			/* Note: Takes advantage of common string/buffer fields */
+
+			value = source_desc->buffer.pointer[0];
+			break;
+
+		default:
+
+			/* All other types are invalid */
+
+			ACPI_ERROR((AE_INFO,
+				    "Source must be Integer/Buffer/String type, not %s",
+				    acpi_ut_get_object_type_name(source_desc)));
+			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+		}
+
+		/* Store the source value into the target buffer byte */
+
+		obj_desc->buffer.pointer[index_desc->reference.value] = value;
+		break;
+
+	default:
+		ACPI_ERROR((AE_INFO, "Target is not a Package or BufferField"));
+		status = AE_AML_OPERAND_TYPE;
+		break;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store_object_to_node
+ *
+ * PARAMETERS:  source_desc             - Value to be stored
+ *              node                    - Named object to receive the value
+ *              walk_state              - Current walk state
+ *              implicit_conversion     - Perform implicit conversion (yes/no)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Store the object to the named object.
+ *
+ *              The Assignment of an object to a named object is handled here
+ *              The value passed in will replace the current value (if any)
+ *              with the input value.
+ *
+ *              When storing into an object the data is converted to the
+ *              target object type then stored in the object. This means
+ *              that the target object type (for an initialized target) will
+ *              not be changed by a store operation. A copy_object can change
+ *              the target type, however.
+ *
+ *              The implicit_conversion flag is set to NO/FALSE only when
+ *              storing to an arg_x -- as per the rules of the ACPI spec.
+ *
+ *              Assumes parameters are already validated.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_store_object_to_node(union acpi_operand_object *source_desc,
+			     struct acpi_namespace_node *node,
+			     struct acpi_walk_state *walk_state,
+			     u8 implicit_conversion)
+{
+	acpi_status status = AE_OK;
+	union acpi_operand_object *target_desc;
+	union acpi_operand_object *new_desc;
+	acpi_object_type target_type;
+
+	ACPI_FUNCTION_TRACE_PTR(ex_store_object_to_node, source_desc);
+
+	/* Get current type of the node, and object attached to Node */
+
+	target_type = acpi_ns_get_type(node);
+	target_desc = acpi_ns_get_attached_object(node);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Storing %p (%s) to node %p (%s)\n",
+			  source_desc,
+			  acpi_ut_get_object_type_name(source_desc), node,
+			  acpi_ut_get_type_name(target_type)));
+
+	/*
+	 * Resolve the source object to an actual value
+	 * (If it is a reference object)
+	 */
+	status = acpi_ex_resolve_object(&source_desc, target_type, walk_state);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Do the actual store operation */
+
+	switch (target_type) {
+	case ACPI_TYPE_INTEGER:
+	case ACPI_TYPE_STRING:
+	case ACPI_TYPE_BUFFER:
+		/*
+		 * The simple data types all support implicit source operand
+		 * conversion before the store.
+		 */
+
+		if ((walk_state->opcode == AML_COPY_OP) || !implicit_conversion) {
+			/*
+			 * However, copy_object and Stores to arg_x do not perform
+			 * an implicit conversion, as per the ACPI specification.
+			 * A direct store is performed instead.
+			 */
+			status = acpi_ex_store_direct_to_node(source_desc, node,
+							      walk_state);
+			break;
+		}
+
+		/* Store with implicit source operand conversion support */
+
+		status =
+		    acpi_ex_store_object_to_object(source_desc, target_desc,
+						   &new_desc, walk_state);
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
+
+		if (new_desc != target_desc) {
+			/*
+			 * Store the new new_desc as the new value of the Name, and set
+			 * the Name's type to that of the value being stored in it.
+			 * source_desc reference count is incremented by attach_object.
+			 *
+			 * Note: This may change the type of the node if an explicit
+			 * store has been performed such that the node/object type
+			 * has been changed.
+			 */
+			status = acpi_ns_attach_object(node, new_desc,
+						       new_desc->common.type);
+
+			ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+					  "Store %s into %s via Convert/Attach\n",
+					  acpi_ut_get_object_type_name
+					  (source_desc),
+					  acpi_ut_get_object_type_name
+					  (new_desc)));
+		}
+		break;
+
+	case ACPI_TYPE_BUFFER_FIELD:
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+		/*
+		 * For all fields, always write the source data to the target
+		 * field. Any required implicit source operand conversion is
+		 * performed in the function below as necessary. Note, field
+		 * objects must retain their original type permanently.
+		 */
+		status = acpi_ex_write_data_to_field(source_desc, target_desc,
+						     &walk_state->result_obj);
+		break;
+
+	default:
+		/*
+		 * No conversions for all other types. Directly store a copy of
+		 * the source object. This is the ACPI spec-defined behavior for
+		 * the copy_object operator.
+		 *
+		 * NOTE: For the Store operator, this is a departure from the
+		 * ACPI spec, which states "If conversion is impossible, abort
+		 * the running control method". Instead, this code implements
+		 * "If conversion is impossible, treat the Store operation as
+		 * a CopyObject".
+		 */
+		status = acpi_ex_store_direct_to_node(source_desc, node,
+						      walk_state);
+		break;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store_direct_to_node
+ *
+ * PARAMETERS:  source_desc             - Value to be stored
+ *              node                    - Named object to receive the value
+ *              walk_state              - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: "Store" an object directly to a node. This involves a copy
+ *              and an attach.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ex_store_direct_to_node(union acpi_operand_object *source_desc,
+			     struct acpi_namespace_node *node,
+			     struct acpi_walk_state *walk_state)
+{
+	acpi_status status;
+	union acpi_operand_object *new_desc;
+
+	ACPI_FUNCTION_TRACE(ex_store_direct_to_node);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+			  "Storing [%s] (%p) directly into node [%s] (%p)"
+			  " with no implicit conversion\n",
+			  acpi_ut_get_object_type_name(source_desc),
+			  source_desc, acpi_ut_get_type_name(node->type),
+			  node));
+
+	/* Copy the source object to a new object */
+
+	status =
+	    acpi_ut_copy_iobject_to_iobject(source_desc, &new_desc, walk_state);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Attach the new object to the node */
+
+	status = acpi_ns_attach_object(node, new_desc, new_desc->common.type);
+	acpi_ut_remove_reference(new_desc);
+	return_ACPI_STATUS(status);
+}