Linux-libre 4.5-gnu

1 files changed, 88 insertions, 25 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 3164f6a1d..146dc0b8e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1331,16 +1331,52 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
 {}
 #endif
 
+#ifdef CONFIG_ARM64
 /*
- * ahci_init_msix() only implements single MSI-X support, not multiple
- * MSI-X per-port interrupts. This is needed for host controllers that only
- * have MSI-X support implemented, but no MSI or intx.
+ * Due to ERRATA#22536, ThunderX needs to handle HOST_IRQ_STAT differently.
+ * Workaround is to make sure all pending IRQs are served before leaving
+ * handler.
+ */
+static irqreturn_t ahci_thunderx_irq_handler(int irq, void *dev_instance)
+{
+	struct ata_host *host = dev_instance;
+	struct ahci_host_priv *hpriv;
+	unsigned int rc = 0;
+	void __iomem *mmio;
+	u32 irq_stat, irq_masked;
+	unsigned int handled = 1;
+
+	VPRINTK("ENTER\n");
+	hpriv = host->private_data;
+	mmio = hpriv->mmio;
+	irq_stat = readl(mmio + HOST_IRQ_STAT);
+	if (!irq_stat)
+		return IRQ_NONE;
+
+	do {
+		irq_masked = irq_stat & hpriv->port_map;
+		spin_lock(&host->lock);
+		rc = ahci_handle_port_intr(host, irq_masked);
+		if (!rc)
+			handled = 0;
+		writel(irq_stat, mmio + HOST_IRQ_STAT);
+		irq_stat = readl(mmio + HOST_IRQ_STAT);
+		spin_unlock(&host->lock);
+	} while (irq_stat);
+	VPRINTK("EXIT\n");
+
+	return IRQ_RETVAL(handled);
+}
+#endif
+
+/*
+ * ahci_init_msix() - optionally enable per-port MSI-X otherwise defer
+ * to single msi.
  */
 static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports,
-			  struct ahci_host_priv *hpriv)
+			  struct ahci_host_priv *hpriv, unsigned long flags)
 {
-	int rc, nvec;
-	struct msix_entry entry = {};
+	int nvec, i, rc;
 
 	/* Do not init MSI-X if MSI is disabled for the device */
 	if (hpriv->flags & AHCI_HFLAG_NO_MSI)
@@ -1350,22 +1386,39 @@ static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports,
 	if (nvec < 0)
 		return nvec;
 
-	if (!nvec) {
+	/*
+	 * Proper MSI-X implementations will have a vector per-port.
+	 * Barring that, we prefer single-MSI over single-MSIX.  If this
+	 * check fails (not enough MSI-X vectors for all ports) we will
+	 * be called again with the flag clear iff ahci_init_msi()
+	 * fails.
+	 */
+	if (flags & AHCI_HFLAG_MULTI_MSIX) {
+		if (nvec < n_ports)
+			return -ENODEV;
+		nvec = n_ports;
+	} else if (nvec) {
+		nvec = 1;
+	} else {
+		/*
+		 * Emit dev_err() since this was the non-legacy irq
+		 * method of last resort.
+		 */
 		rc = -ENODEV;
 		goto fail;
 	}
 
-	/*
-	 * There can be more than one vector (e.g. for error detection or
-	 * hdd hotplug). Only the first vector (entry.entry = 0) is used.
-	 */
-	rc = pci_enable_msix_exact(pdev, &entry, 1);
+	for (i = 0; i < nvec; i++)
+		hpriv->msix[i].entry = i;
+	rc = pci_enable_msix_exact(pdev, hpriv->msix, nvec);
 	if (rc < 0)
 		goto fail;
 
-	hpriv->irq = entry.vector;
+	if (nvec > 1)
+		hpriv->flags |= AHCI_HFLAG_MULTI_MSIX;
+	hpriv->irq = hpriv->msix[0].vector; /* for single msi-x */
 
-	return 1;
+	return nvec;
 fail:
 	dev_err(&pdev->dev,
 		"failed to enable MSI-X with error %d, # of vectors: %d\n",
@@ -1429,20 +1482,25 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
 {
 	int nvec;
 
+	/*
+	 * Try to enable per-port MSI-X.  If the host is not capable
+	 * fall back to single MSI before finally attempting single
+	 * MSI-X.
+	 */
+	nvec = ahci_init_msix(pdev, n_ports, hpriv, AHCI_HFLAG_MULTI_MSIX);
+	if (nvec >= 0)
+		return nvec;
+
 	nvec = ahci_init_msi(pdev, n_ports, hpriv);
 	if (nvec >= 0)
 		return nvec;
 
-	/*
-	 * Currently, MSI-X support only implements single IRQ mode and
-	 * exists for controllers which can't do other types of IRQ. Only
-	 * set it up if MSI fails.
-	 */
-	nvec = ahci_init_msix(pdev, n_ports, hpriv);
+	/* try single-msix */
+	nvec = ahci_init_msix(pdev, n_ports, hpriv, 0);
 	if (nvec >= 0)
 		return nvec;
 
-	/* lagacy intx interrupts */
+	/* legacy intx interrupts */
 	pci_intx(pdev, 1);
 	hpriv->irq = pdev->irq;
 
@@ -1546,6 +1604,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ahci_broken_devslp(pdev))
 		hpriv->flags |= AHCI_HFLAG_NO_DEVSLP;
 
+#ifdef CONFIG_ARM64
+	if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
+		hpriv->irq_handler = ahci_thunderx_irq_handler;
+#endif
+
 	/* save initial config */
 	ahci_pci_save_initial_config(pdev, hpriv);
 
@@ -1604,7 +1667,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!host)
 		return -ENOMEM;
 	host->private_data = hpriv;
-
+	hpriv->msix = devm_kzalloc(&pdev->dev,
+			sizeof(struct msix_entry) * n_ports, GFP_KERNEL);
+	if (!hpriv->msix)
+		return -ENOMEM;
 	ahci_init_interrupts(pdev, n_ports, hpriv);
 
 	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
@@ -1626,9 +1692,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		if (ap->flags & ATA_FLAG_EM)
 			ap->em_message_type = hpriv->em_msg_type;
 
-		rc = ahci_setup_port_privdata(ap);
-		if (rc)
-			return rc;
 
 		/* disabled/not-implemented port */
 		if (!(hpriv->port_map & (1 << i)))