summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_artop.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/ata/pata_artop.c
Initial import
Diffstat (limited to 'drivers/ata/pata_artop.c')
-rw-r--r--drivers/ata/pata_artop.c459
1 files changed, 459 insertions, 0 deletions
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
new file mode 100644
index 000000000..96c05c949
--- /dev/null
+++ b/drivers/ata/pata_artop.c
@@ -0,0 +1,459 @@
+/*
+ * pata_artop.c - ARTOP ATA controller driver
+ *
+ * (C) 2006 Red Hat
+ * (C) 2007,2011 Bartlomiej Zolnierkiewicz
+ *
+ * Based in part on drivers/ide/pci/aec62xx.c
+ * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
+ * 865/865R fixes for Macintosh card version from a patch to the old
+ * driver by Thibaut VARENE <varenet@parisc-linux.org>
+ * When setting the PCI latency we must set 0x80 or higher for burst
+ * performance Alessandro Zummo <alessandro.zummo@towertech.it>
+ *
+ * TODO
+ * Investigate no_dsc on 850R
+ * Clock detect
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/ata.h>
+
+#define DRV_NAME "pata_artop"
+#define DRV_VERSION "0.4.6"
+
+/*
+ * The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
+ * get PCI bus speed functionality we leave this as 0. Its a variable
+ * for when we get the functionality and also for folks wanting to
+ * test stuff.
+ */
+
+static int clock = 0;
+
+/**
+ * artop62x0_pre_reset - probe begin
+ * @link: link
+ * @deadline: deadline jiffies for the operation
+ *
+ * Nothing complicated needed here.
+ */
+
+static int artop62x0_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+ static const struct pci_bits artop_enable_bits[] = {
+ { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */
+ { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */
+ };
+
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ /* Odd numbered device ids are the units with enable bits. */
+ if ((pdev->device & 1) &&
+ !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
+ return -ENOENT;
+
+ return ata_sff_prereset(link, deadline);
+}
+
+/**
+ * artop6260_cable_detect - identify cable type
+ * @ap: Port
+ *
+ * Identify the cable type for the ARTOP interface in question
+ */
+
+static int artop6260_cable_detect(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 tmp;
+ pci_read_config_byte(pdev, 0x49, &tmp);
+ if (tmp & (1 << ap->port_no))
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
+}
+
+/**
+ * artop6210_load_piomode - Load a set of PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device
+ * @pio: PIO mode
+ *
+ * Set PIO mode for device, in host controller PCI config space. This
+ * is used both to set PIO timings in PIO mode and also to set the
+ * matching PIO clocking for UDMA, as well as the MWDMA timings.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void artop6210_load_piomode(struct ata_port *ap, struct ata_device *adev, unsigned int pio)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int dn = adev->devno + 2 * ap->port_no;
+ const u16 timing[2][5] = {
+ { 0x0000, 0x000A, 0x0008, 0x0303, 0x0301 },
+ { 0x0700, 0x070A, 0x0708, 0x0403, 0x0401 }
+
+ };
+ /* Load the PIO timing active/recovery bits */
+ pci_write_config_word(pdev, 0x40 + 2 * dn, timing[clock][pio]);
+}
+
+/**
+ * artop6210_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device we are configuring
+ *
+ * Set PIO mode for device, in host controller PCI config space. For
+ * ARTOP we must also clear the UDMA bits if we are not doing UDMA. In
+ * the event UDMA is used the later call to set_dmamode will set the
+ * bits as required.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void artop6210_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int dn = adev->devno + 2 * ap->port_no;
+ u8 ultra;
+
+ artop6210_load_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
+
+ /* Clear the UDMA mode bits (set_dmamode will redo this if needed) */
+ pci_read_config_byte(pdev, 0x54, &ultra);
+ ultra &= ~(3 << (2 * dn));
+ pci_write_config_byte(pdev, 0x54, ultra);
+}
+
+/**
+ * artop6260_load_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device we are configuring
+ * @pio: PIO mode
+ *
+ * Set PIO mode for device, in host controller PCI config space. The
+ * ARTOP6260 and relatives store the timing data differently.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void artop6260_load_piomode (struct ata_port *ap, struct ata_device *adev, unsigned int pio)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int dn = adev->devno + 2 * ap->port_no;
+ const u8 timing[2][5] = {
+ { 0x00, 0x0A, 0x08, 0x33, 0x31 },
+ { 0x70, 0x7A, 0x78, 0x43, 0x41 }
+
+ };
+ /* Load the PIO timing active/recovery bits */
+ pci_write_config_byte(pdev, 0x40 + dn, timing[clock][pio]);
+}
+
+/**
+ * artop6260_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device we are configuring
+ *
+ * Set PIO mode for device, in host controller PCI config space. For
+ * ARTOP we must also clear the UDMA bits if we are not doing UDMA. In
+ * the event UDMA is used the later call to set_dmamode will set the
+ * bits as required.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void artop6260_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 ultra;
+
+ artop6260_load_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
+
+ /* Clear the UDMA mode bits (set_dmamode will redo this if needed) */
+ pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra);
+ ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */
+ pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra);
+}
+
+/**
+ * artop6210_set_dmamode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device whose timings we are configuring
+ *
+ * Set DMA mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void artop6210_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int pio;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int dn = adev->devno + 2 * ap->port_no;
+ u8 ultra;
+
+ if (adev->dma_mode == XFER_MW_DMA_0)
+ pio = 1;
+ else
+ pio = 4;
+
+ /* Load the PIO timing active/recovery bits */
+ artop6210_load_piomode(ap, adev, pio);
+
+ pci_read_config_byte(pdev, 0x54, &ultra);
+ ultra &= ~(3 << (2 * dn));
+
+ /* Add ultra DMA bits if in UDMA mode */
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ u8 mode = (adev->dma_mode - XFER_UDMA_0) + 1 - clock;
+ if (mode == 0)
+ mode = 1;
+ ultra |= (mode << (2 * dn));
+ }
+ pci_write_config_byte(pdev, 0x54, ultra);
+}
+
+/**
+ * artop6260_set_dmamode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device we are configuring
+ *
+ * Set DMA mode for device, in host controller PCI config space. The
+ * ARTOP6260 and relatives store the timing data differently.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void artop6260_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 ultra;
+
+ if (adev->dma_mode == XFER_MW_DMA_0)
+ pio = 1;
+ else
+ pio = 4;
+
+ /* Load the PIO timing active/recovery bits */
+ artop6260_load_piomode(ap, adev, pio);
+
+ /* Add ultra DMA bits if in UDMA mode */
+ pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra);
+ ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ u8 mode = adev->dma_mode - XFER_UDMA_0 + 1 - clock;
+ if (mode == 0)
+ mode = 1;
+ ultra |= (mode << (4 * adev->devno));
+ }
+ pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra);
+}
+
+/**
+ * artop_6210_qc_defer - implement serialization
+ * @qc: command
+ *
+ * Issue commands per host on this chip.
+ */
+
+static int artop6210_qc_defer(struct ata_queued_cmd *qc)
+{
+ struct ata_host *host = qc->ap->host;
+ struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
+ int rc;
+
+ /* First apply the usual rules */
+ rc = ata_std_qc_defer(qc);
+ if (rc != 0)
+ return rc;
+
+ /* Now apply serialization rules. Only allow a command if the
+ other channel state machine is idle */
+ if (alt && alt->qc_active)
+ return ATA_DEFER_PORT;
+ return 0;
+}
+
+static struct scsi_host_template artop_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations artop6210_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_40wire,
+ .set_piomode = artop6210_set_piomode,
+ .set_dmamode = artop6210_set_dmamode,
+ .prereset = artop62x0_pre_reset,
+ .qc_defer = artop6210_qc_defer,
+};
+
+static struct ata_port_operations artop6260_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = artop6260_cable_detect,
+ .set_piomode = artop6260_set_piomode,
+ .set_dmamode = artop6260_set_dmamode,
+ .prereset = artop62x0_pre_reset,
+};
+
+static void atp8xx_fixup(struct pci_dev *pdev)
+{
+ if (pdev->device == 0x0005)
+ /* BIOS may have left us in UDMA, clear it before libata probe */
+ pci_write_config_byte(pdev, 0x54, 0);
+ else if (pdev->device == 0x0008 || pdev->device == 0x0009) {
+ u8 reg;
+
+ /* Mac systems come up with some registers not set as we
+ will need them */
+
+ /* Clear reset & test bits */
+ pci_read_config_byte(pdev, 0x49, &reg);
+ pci_write_config_byte(pdev, 0x49, reg & ~0x30);
+
+ /* PCI latency must be > 0x80 for burst mode, tweak it
+ * if required.
+ */
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &reg);
+ if (reg <= 0x80)
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90);
+
+ /* Enable IRQ output and burst mode */
+ pci_read_config_byte(pdev, 0x4a, &reg);
+ pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
+ }
+}
+
+/**
+ * artop_init_one - Register ARTOP ATA PCI device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in artop_pci_tbl matching with @pdev
+ *
+ * Called from kernel PCI layer.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ static const struct ata_port_info info_6210 = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA2,
+ .port_ops = &artop6210_ops,
+ };
+ static const struct ata_port_info info_626x = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
+ .port_ops = &artop6260_ops,
+ };
+ static const struct ata_port_info info_628x = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &artop6260_ops,
+ };
+ static const struct ata_port_info info_628x_fast = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &artop6260_ops,
+ };
+ const struct ata_port_info *ppi[] = { NULL, NULL };
+ int rc;
+
+ ata_print_version_once(&pdev->dev, DRV_VERSION);
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ if (id->driver_data == 0) /* 6210 variant */
+ ppi[0] = &info_6210;
+ else if (id->driver_data == 1) /* 6260 */
+ ppi[0] = &info_626x;
+ else if (id->driver_data == 2) { /* 6280 or 6280 + fast */
+ unsigned long io = pci_resource_start(pdev, 4);
+
+ ppi[0] = &info_628x;
+ if (inb(io) & 0x10)
+ ppi[0] = &info_628x_fast;
+ }
+
+ BUG_ON(ppi[0] == NULL);
+
+ atp8xx_fixup(pdev);
+
+ return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0);
+}
+
+static const struct pci_device_id artop_pci_tbl[] = {
+ { PCI_VDEVICE(ARTOP, 0x0005), 0 },
+ { PCI_VDEVICE(ARTOP, 0x0006), 1 },
+ { PCI_VDEVICE(ARTOP, 0x0007), 1 },
+ { PCI_VDEVICE(ARTOP, 0x0008), 2 },
+ { PCI_VDEVICE(ARTOP, 0x0009), 2 },
+
+ { } /* terminate list */
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int atp8xx_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = pci_get_drvdata(pdev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ atp8xx_fixup(pdev);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
+static struct pci_driver artop_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = artop_pci_tbl,
+ .probe = artop_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = atp8xx_reinit_one,
+#endif
+};
+
+module_pci_driver(artop_pci_driver);
+
+MODULE_AUTHOR("Alan Cox, Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("SCSI low-level driver for ARTOP PATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, artop_pci_tbl);
+MODULE_VERSION(DRV_VERSION);