diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
commit | 57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch) | |
tree | 5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/ata/pata_ns87410.c |
Initial import
Diffstat (limited to 'drivers/ata/pata_ns87410.c')
-rw-r--r-- | drivers/ata/pata_ns87410.c | 176 |
1 files changed, 176 insertions, 0 deletions
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c new file mode 100644 index 000000000..200e1eb23 --- /dev/null +++ b/drivers/ata/pata_ns87410.c @@ -0,0 +1,176 @@ +/* + * pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer + * (C) 2006 Red Hat Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_ns87410" +#define DRV_VERSION "0.4.6" + +/** + * ns87410_pre_reset - probe begin + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Check enabled ports + */ + +static int ns87410_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits ns87410_enable_bits[] = { + { 0x43, 1, 0x08, 0x08 }, + { 0x47, 1, 0x08, 0x08 } + }; + + if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * ns87410_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program timing data. This is kept per channel not per device, + * and only affects the data port. + */ + +static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x40 + 4 * ap->port_no; + u8 idetcr, idefr; + struct ata_timing at; + + static const u8 activebits[15] = { + 0, 1, 2, 3, 4, + 5, 5, 6, 6, 6, + 6, 7, 7, 7, 7 + }; + + static const u8 recoverbits[12] = { + 0, 1, 2, 3, 4, 5, 6, 6, 7, 7, 7, 7 + }; + + pci_read_config_byte(pdev, port + 3, &idefr); + + if (ata_pio_need_iordy(adev)) + idefr |= 0x04; /* IORDY enable */ + else + idefr &= ~0x04; + + if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) { + dev_err(&pdev->dev, "unknown mode %d\n", adev->pio_mode); + return; + } + + at.active = clamp_val(at.active, 2, 16) - 2; + at.setup = clamp_val(at.setup, 1, 4) - 1; + at.recover = clamp_val(at.recover, 1, 12) - 1; + + idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active]; + + pci_write_config_byte(pdev, port, idetcr); + pci_write_config_byte(pdev, port + 3, idefr); + /* We use ap->private_data as a pointer to the device currently + loaded for timing */ + ap->private_data = adev; +} + +/** + * ns87410_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * necessary. + */ + +static unsigned int ns87410_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If modes have been configured and the channel data is not loaded + then load it. We have to check if pio_mode is set as the core code + does not set adev->pio_mode to XFER_PIO_0 while probing as would be + logical */ + + if (adev->pio_mode && adev != ap->private_data) + ns87410_set_piomode(ap, adev); + + return ata_sff_qc_issue(qc); +} + +static struct scsi_host_template ns87410_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations ns87410_port_ops = { + .inherits = &ata_sff_port_ops, + .qc_issue = ns87410_qc_issue, + .cable_detect = ata_cable_40wire, + .set_piomode = ns87410_set_piomode, + .prereset = ns87410_pre_reset, +}; + +static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO3, + .port_ops = &ns87410_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL, 0); +} + +static const struct pci_device_id ns87410[] = { + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87410), }, + + { }, +}; + +static struct pci_driver ns87410_pci_driver = { + .name = DRV_NAME, + .id_table = ns87410, + .probe = ns87410_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(ns87410_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Nat Semi 87410"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ns87410); +MODULE_VERSION(DRV_VERSION); |