Initial import

1 files changed, 148 insertions, 0 deletions

diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
new file mode 100644
index 000000000..b3ec18c6b
--- /dev/null
+++ b/drivers/ata/pata_rz1000.c
@@ -0,0 +1,148 @@
+/*
+ *  RZ1000/1001 driver based upon
+ *
+ *  linux/drivers/ide/pci/rz1000.c	Version 0.06	January 12, 2003
+ *  Copyright (C) 1995-1998  Linus Torvalds & author (see below)
+ *  Principal Author:  mlord@pobox.com (Mark Lord)
+ *
+ *  See linux/MAINTAINERS for address of current maintainer.
+ *
+ *  This file provides support for disabling the buggy read-ahead
+ *  mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME	"pata_rz1000"
+#define DRV_VERSION	"0.2.4"
+
+
+/**
+ *	rz1000_set_mode		-	mode setting function
+ *	@link: ATA link
+ *	@unused: returned device on set_mode failure
+ *
+ *	Use a non standard set_mode function. We don't want to be tuned. We
+ *	would prefer to be BIOS generic but for the fact our hardware is
+ *	whacked out.
+ */
+
+static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused)
+{
+	struct ata_device *dev;
+
+	ata_for_each_dev(dev, link, ENABLED) {
+		/* We don't really care */
+		dev->pio_mode = XFER_PIO_0;
+		dev->xfer_mode = XFER_PIO_0;
+		dev->xfer_shift = ATA_SHIFT_PIO;
+		dev->flags |= ATA_DFLAG_PIO;
+		ata_dev_info(dev, "configured for PIO\n");
+	}
+	return 0;
+}
+
+
+static struct scsi_host_template rz1000_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations rz1000_port_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.cable_detect	= ata_cable_40wire,
+	.set_mode	= rz1000_set_mode,
+};
+
+static int rz1000_fifo_disable(struct pci_dev *pdev)
+{
+	u16 reg;
+	/* Be exceptionally paranoid as we must be sure to apply the fix */
+	if (pci_read_config_word(pdev, 0x40, &reg) != 0)
+		return -1;
+	reg &= 0xDFFF;
+	if (pci_write_config_word(pdev, 0x40, reg) != 0)
+		return -1;
+	printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n");
+	return 0;
+}
+
+/**
+ *	rz1000_init_one - Register RZ1000 ATA PCI device with kernel services
+ *	@pdev: PCI device to register
+ *	@ent: Entry in rz1000_pci_tbl matching with @pdev
+ *
+ *	Configure an RZ1000 interface. This doesn't require much special
+ *	handling except that we *MUST* kill the chipset readahead or the
+ *	user may experience data corruption.
+ */
+
+static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	static const struct ata_port_info info = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = ATA_PIO4,
+		.port_ops = &rz1000_port_ops
+	};
+	const struct ata_port_info *ppi[] = { &info, NULL };
+
+	ata_print_version_once(&pdev->dev, DRV_VERSION);
+
+	if (rz1000_fifo_disable(pdev) == 0)
+		return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL, 0);
+
+	printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
+	/* Not safe to use so skip */
+	return -ENODEV;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rz1000_reinit_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = pci_get_drvdata(pdev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
+	/* If this fails on resume (which is a "can't happen" case), we
+	   must stop as any progress risks data loss */
+	if (rz1000_fifo_disable(pdev))
+		panic("rz1000 fifo");
+
+	ata_host_resume(host);
+	return 0;
+}
+#endif
+
+static const struct pci_device_id pata_rz1000[] = {
+	{ PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), },
+	{ PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), },
+
+	{ },
+};
+
+static struct pci_driver rz1000_pci_driver = {
+	.name 		= DRV_NAME,
+	.id_table	= pata_rz1000,
+	.probe 		= rz1000_init_one,
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+	.suspend	= ata_pci_device_suspend,
+	.resume		= rz1000_reinit_one,
+#endif
+};
+
+module_pci_driver(rz1000_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for RZ1000 PCI ATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pata_rz1000);
+MODULE_VERSION(DRV_VERSION);