summaryrefslogtreecommitdiff
path: root/drivers/atm/iphase.h
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/atm/iphase.h
Initial import
Diffstat (limited to 'drivers/atm/iphase.h')
-rw-r--r--drivers/atm/iphase.h1453
1 files changed, 1453 insertions, 0 deletions
diff --git a/drivers/atm/iphase.h b/drivers/atm/iphase.h
new file mode 100644
index 000000000..53ecac5a2
--- /dev/null
+++ b/drivers/atm/iphase.h
@@ -0,0 +1,1453 @@
+/******************************************************************************
+ Device driver for Interphase ATM PCI adapter cards
+ Author: Peter Wang <pwang@iphase.com>
+ Interphase Corporation <www.iphase.com>
+ Version: 1.0
+ iphase.h: This is the header file for iphase.c.
+*******************************************************************************
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on this skeleton fall under the GPL and must retain
+ the authorship (implicit copyright) notice.
+
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ Modified from an incomplete driver for Interphase 5575 1KVC 1M card which
+ was originally written by Monalisa Agrawal at UNH. Now this driver
+ supports a variety of varients of Interphase ATM PCI (i)Chip adapter
+ card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM)
+ in terms of PHY type, the size of control memory and the size of
+ packet memory. The followings are the change log and history:
+
+ Bugfix the Mona's UBR driver.
+ Modify the basic memory allocation and dma logic.
+ Port the driver to the latest kernel from 2.0.46.
+ Complete the ABR logic of the driver, and added the ABR work-
+ around for the hardware anormalies.
+ Add the CBR support.
+ Add the flow control logic to the driver to allow rate-limit VC.
+ Add 4K VC support to the board with 512K control memory.
+ Add the support of all the variants of the Interphase ATM PCI
+ (i)Chip adapter cards including x575 (155M OC3 and UTP155), x525
+ (25M UTP25) and x531 (DS3 and E3).
+ Add SMP support.
+
+ Support and updates available at: ftp://ftp.iphase.com/pub/atm
+
+*******************************************************************************/
+
+#ifndef IPHASE_H
+#define IPHASE_H
+
+
+/************************ IADBG DEFINE *********************************/
+/* IADebugFlag Bit Map */
+#define IF_IADBG_INIT_ADAPTER 0x00000001 // init adapter info
+#define IF_IADBG_TX 0x00000002 // debug TX
+#define IF_IADBG_RX 0x00000004 // debug RX
+#define IF_IADBG_QUERY_INFO 0x00000008 // debug Request call
+#define IF_IADBG_SHUTDOWN 0x00000010 // debug shutdown event
+#define IF_IADBG_INTR 0x00000020 // debug interrupt DPC
+#define IF_IADBG_TXPKT 0x00000040 // debug TX PKT
+#define IF_IADBG_RXPKT 0x00000080 // debug RX PKT
+#define IF_IADBG_ERR 0x00000100 // debug system error
+#define IF_IADBG_EVENT 0x00000200 // debug event
+#define IF_IADBG_DIS_INTR 0x00001000 // debug disable interrupt
+#define IF_IADBG_EN_INTR 0x00002000 // debug enable interrupt
+#define IF_IADBG_LOUD 0x00004000 // debugging info
+#define IF_IADBG_VERY_LOUD 0x00008000 // excessive debugging info
+#define IF_IADBG_CBR 0x00100000 //
+#define IF_IADBG_UBR 0x00200000 //
+#define IF_IADBG_ABR 0x00400000 //
+#define IF_IADBG_DESC 0x01000000 //
+#define IF_IADBG_SUNI_STAT 0x02000000 // suni statistics
+#define IF_IADBG_RESET 0x04000000
+
+#define IF_IADBG(f) if (IADebugFlag & (f))
+
+#ifdef CONFIG_ATM_IA_DEBUG /* Debug build */
+
+#define IF_LOUD(A) IF_IADBG(IF_IADBG_LOUD) { A }
+#define IF_ERR(A) IF_IADBG(IF_IADBG_ERR) { A }
+#define IF_VERY_LOUD(A) IF_IADBG( IF_IADBG_VERY_LOUD ) { A }
+
+#define IF_INIT_ADAPTER(A) IF_IADBG( IF_IADBG_INIT_ADAPTER ) { A }
+#define IF_INIT(A) IF_IADBG( IF_IADBG_INIT_ADAPTER ) { A }
+#define IF_SUNI_STAT(A) IF_IADBG( IF_IADBG_SUNI_STAT ) { A }
+#define IF_QUERY_INFO(A) IF_IADBG( IF_IADBG_QUERY_INFO ) { A }
+#define IF_COPY_OVER(A) IF_IADBG( IF_IADBG_COPY_OVER ) { A }
+
+#define IF_INTR(A) IF_IADBG( IF_IADBG_INTR ) { A }
+#define IF_DIS_INTR(A) IF_IADBG( IF_IADBG_DIS_INTR ) { A }
+#define IF_EN_INTR(A) IF_IADBG( IF_IADBG_EN_INTR ) { A }
+
+#define IF_TX(A) IF_IADBG( IF_IADBG_TX ) { A }
+#define IF_RX(A) IF_IADBG( IF_IADBG_RX ) { A }
+#define IF_TXPKT(A) IF_IADBG( IF_IADBG_TXPKT ) { A }
+#define IF_RXPKT(A) IF_IADBG( IF_IADBG_RXPKT ) { A }
+
+#define IF_SHUTDOWN(A) IF_IADBG(IF_IADBG_SHUTDOWN) { A }
+#define IF_CBR(A) IF_IADBG( IF_IADBG_CBR ) { A }
+#define IF_UBR(A) IF_IADBG( IF_IADBG_UBR ) { A }
+#define IF_ABR(A) IF_IADBG( IF_IADBG_ABR ) { A }
+#define IF_EVENT(A) IF_IADBG( IF_IADBG_EVENT) { A }
+
+#else /* free build */
+#define IF_LOUD(A)
+#define IF_VERY_LOUD(A)
+#define IF_INIT_ADAPTER(A)
+#define IF_INIT(A)
+#define IF_SUNI_STAT(A)
+#define IF_PVC_CHKPKT(A)
+#define IF_QUERY_INFO(A)
+#define IF_COPY_OVER(A)
+#define IF_HANG(A)
+#define IF_INTR(A)
+#define IF_DIS_INTR(A)
+#define IF_EN_INTR(A)
+#define IF_TX(A)
+#define IF_RX(A)
+#define IF_TXDEBUG(A)
+#define IF_VC(A)
+#define IF_ERR(A)
+#define IF_CBR(A)
+#define IF_UBR(A)
+#define IF_ABR(A)
+#define IF_SHUTDOWN(A)
+#define DbgPrint(A)
+#define IF_EVENT(A)
+#define IF_TXPKT(A)
+#define IF_RXPKT(A)
+#endif /* CONFIG_ATM_IA_DEBUG */
+
+#define isprint(a) ((a >=' ')&&(a <= '~'))
+#define ATM_DESC(skb) (skb->protocol)
+#define IA_SKB_STATE(skb) (skb->protocol)
+#define IA_DLED 1
+#define IA_TX_DONE 2
+
+/* iadbg defines */
+#define IA_CMD 0x7749
+typedef struct {
+ int cmd;
+ int sub_cmd;
+ int len;
+ u32 maddr;
+ int status;
+ void __user *buf;
+} IA_CMDBUF, *PIA_CMDBUF;
+
+/* cmds */
+#define MEMDUMP 0x01
+
+/* sub_cmds */
+#define MEMDUMP_SEGREG 0x2
+#define MEMDUMP_DEV 0x1
+#define MEMDUMP_REASSREG 0x3
+#define MEMDUMP_FFL 0x4
+#define READ_REG 0x5
+#define WAKE_DBG_WAIT 0x6
+
+/************************ IADBG DEFINE END ***************************/
+
+#define Boolean(x) ((x) ? 1 : 0)
+#define NR_VCI 1024 /* number of VCIs */
+#define NR_VCI_LD 10 /* log2(NR_VCI) */
+#define NR_VCI_4K 4096 /* number of VCIs */
+#define NR_VCI_4K_LD 12 /* log2(NR_VCI) */
+#define MEM_VALID 0xfffffff0 /* mask base address with this */
+
+#ifndef PCI_VENDOR_ID_IPHASE
+#define PCI_VENDOR_ID_IPHASE 0x107e
+#endif
+#ifndef PCI_DEVICE_ID_IPHASE_5575
+#define PCI_DEVICE_ID_IPHASE_5575 0x0008
+#endif
+#define DEV_LABEL "ia"
+#define PCR 207692
+#define ICR 100000
+#define MCR 0
+#define TBE 1000
+#define FRTT 1
+#define RIF 2
+#define RDF 4
+#define NRMCODE 5 /* 0 - 7 */
+#define TRMCODE 3 /* 0 - 7 */
+#define CDFCODE 6
+#define ATDFCODE 2 /* 0 - 15 */
+
+/*---------------------- Packet/Cell Memory ------------------------*/
+#define TX_PACKET_RAM 0x00000 /* start of Trasnmit Packet memory - 0 */
+#define DFL_TX_BUF_SZ 10240 /* 10 K buffers */
+#define DFL_TX_BUFFERS 50 /* number of packet buffers for Tx
+ - descriptor 0 unused */
+#define REASS_RAM_SIZE 0x10000 /* for 64K 1K VC board */
+#define RX_PACKET_RAM 0x80000 /* start of Receive Packet memory - 512K */
+#define DFL_RX_BUF_SZ 10240 /* 10k buffers */
+#define DFL_RX_BUFFERS 50 /* number of packet buffers for Rx
+ - descriptor 0 unused */
+
+struct cpcs_trailer
+{
+ u_short control;
+ u_short length;
+ u_int crc32;
+};
+
+struct cpcs_trailer_desc
+{
+ struct cpcs_trailer *cpcs;
+ dma_addr_t dma_addr;
+};
+
+struct ia_vcc
+{
+ int rxing;
+ int txing;
+ int NumCbrEntry;
+ u32 pcr;
+ u32 saved_tx_quota;
+ int flow_inc;
+ struct sk_buff_head txing_skb;
+ int ltimeout;
+ u8 vc_desc_cnt;
+
+};
+
+struct abr_vc_table
+{
+ u_char status;
+ u_char rdf;
+ u_short air;
+ u_int res[3];
+ u_int req_rm_cell_data1;
+ u_int req_rm_cell_data2;
+ u_int add_rm_cell_data1;
+ u_int add_rm_cell_data2;
+};
+
+/* 32 byte entries */
+struct main_vc
+{
+ u_short type;
+#define ABR 0x8000
+#define UBR 0xc000
+#define CBR 0x0000
+ /* ABR fields */
+ u_short nrm;
+ u_short trm;
+ u_short rm_timestamp_hi;
+ u_short rm_timestamp_lo:8,
+ crm:8;
+ u_short remainder; /* ABR and UBR fields - last 10 bits*/
+ u_short next_vc_sched;
+ u_short present_desc; /* all classes */
+ u_short last_cell_slot; /* ABR and UBR */
+ u_short pcr;
+ u_short fraction;
+ u_short icr;
+ u_short atdf;
+ u_short mcr;
+ u_short acr;
+ u_short unack:8,
+ status:8; /* all classes */
+#define UIOLI 0x80
+#define CRC_APPEND 0x40 /* for status field - CRC-32 append */
+#define ABR_STATE 0x02
+
+};
+
+
+/* 8 byte entries */
+struct ext_vc
+{
+ u_short atm_hdr1;
+ u_short atm_hdr2;
+ u_short last_desc;
+ u_short out_of_rate_link; /* reserved for UBR and CBR */
+};
+
+
+#define DLE_ENTRIES 256
+#define DMA_INT_ENABLE 0x0002 /* use for both Tx and Rx */
+#define TX_DLE_PSI 0x0001
+#define DLE_TOTAL_SIZE (sizeof(struct dle)*DLE_ENTRIES)
+
+/* Descriptor List Entries (DLE) */
+struct dle
+{
+ u32 sys_pkt_addr;
+ u32 local_pkt_addr;
+ u32 bytes;
+ u16 prq_wr_ptr_data;
+ u16 mode;
+};
+
+struct dle_q
+{
+ struct dle *start;
+ struct dle *end;
+ struct dle *read;
+ struct dle *write;
+};
+
+struct free_desc_q
+{
+ int desc; /* Descriptor number */
+ struct free_desc_q *next;
+};
+
+struct tx_buf_desc {
+ unsigned short desc_mode;
+ unsigned short vc_index;
+ unsigned short res1; /* reserved field */
+ unsigned short bytes;
+ unsigned short buf_start_hi;
+ unsigned short buf_start_lo;
+ unsigned short res2[10]; /* reserved field */
+};
+
+
+struct rx_buf_desc {
+ unsigned short desc_mode;
+ unsigned short vc_index;
+ unsigned short vpi;
+ unsigned short bytes;
+ unsigned short buf_start_hi;
+ unsigned short buf_start_lo;
+ unsigned short dma_start_hi;
+ unsigned short dma_start_lo;
+ unsigned short crc_upper;
+ unsigned short crc_lower;
+ unsigned short res:8, timeout:8;
+ unsigned short res2[5]; /* reserved field */
+};
+
+/*--------SAR stuff ---------------------*/
+
+#define EPROM_SIZE 0x40000 /* says 64K in the docs ??? */
+#define MAC1_LEN 4
+#define MAC2_LEN 2
+
+/*------------ PCI Memory Space Map, 128K SAR memory ----------------*/
+#define IPHASE5575_PCI_CONFIG_REG_BASE 0x0000
+#define IPHASE5575_BUS_CONTROL_REG_BASE 0x1000 /* offsets 0x00 - 0x3c */
+#define IPHASE5575_FRAG_CONTROL_REG_BASE 0x2000
+#define IPHASE5575_REASS_CONTROL_REG_BASE 0x3000
+#define IPHASE5575_DMA_CONTROL_REG_BASE 0x4000
+#define IPHASE5575_FRONT_END_REG_BASE IPHASE5575_DMA_CONTROL_REG_BASE
+#define IPHASE5575_FRAG_CONTROL_RAM_BASE 0x10000
+#define IPHASE5575_REASS_CONTROL_RAM_BASE 0x20000
+
+/*------------ Bus interface control registers -----------------*/
+#define IPHASE5575_BUS_CONTROL_REG 0x00
+#define IPHASE5575_BUS_STATUS_REG 0x01 /* actual offset 0x04 */
+#define IPHASE5575_MAC1 0x02
+#define IPHASE5575_REV 0x03
+#define IPHASE5575_MAC2 0x03 /*actual offset 0x0e-reg 0x0c*/
+#define IPHASE5575_EXT_RESET 0x04
+#define IPHASE5575_INT_RESET 0x05 /* addr 1c ?? reg 0x06 */
+#define IPHASE5575_PCI_ADDR_PAGE 0x07 /* reg 0x08, 0x09 ?? */
+#define IPHASE5575_EEPROM_ACCESS 0x0a /* actual offset 0x28 */
+#define IPHASE5575_CELL_FIFO_QUEUE_SZ 0x0b
+#define IPHASE5575_CELL_FIFO_MARK_STATE 0x0c
+#define IPHASE5575_CELL_FIFO_READ_PTR 0x0d
+#define IPHASE5575_CELL_FIFO_WRITE_PTR 0x0e
+#define IPHASE5575_CELL_FIFO_CELLS_AVL 0x0f /* actual offset 0x3c */
+
+/* Bus Interface Control Register bits */
+#define CTRL_FE_RST 0x80000000
+#define CTRL_LED 0x40000000
+#define CTRL_25MBPHY 0x10000000
+#define CTRL_ENCMBMEM 0x08000000
+#define CTRL_ENOFFSEG 0x01000000
+#define CTRL_ERRMASK 0x00400000
+#define CTRL_DLETMASK 0x00100000
+#define CTRL_DLERMASK 0x00080000
+#define CTRL_FEMASK 0x00040000
+#define CTRL_SEGMASK 0x00020000
+#define CTRL_REASSMASK 0x00010000
+#define CTRL_CSPREEMPT 0x00002000
+#define CTRL_B128 0x00000200
+#define CTRL_B64 0x00000100
+#define CTRL_B48 0x00000080
+#define CTRL_B32 0x00000040
+#define CTRL_B16 0x00000020
+#define CTRL_B8 0x00000010
+
+/* Bus Interface Status Register bits */
+#define STAT_CMEMSIZ 0xc0000000
+#define STAT_ADPARCK 0x20000000
+#define STAT_RESVD 0x1fffff80
+#define STAT_ERRINT 0x00000040
+#define STAT_MARKINT 0x00000020
+#define STAT_DLETINT 0x00000010
+#define STAT_DLERINT 0x00000008
+#define STAT_FEINT 0x00000004
+#define STAT_SEGINT 0x00000002
+#define STAT_REASSINT 0x00000001
+
+
+/*--------------- Segmentation control registers -----------------*/
+/* The segmentation registers are 16 bits access and the addresses
+ are defined as such so the addresses are the actual "offsets" */
+#define IDLEHEADHI 0x00
+#define IDLEHEADLO 0x01
+#define MAXRATE 0x02
+/* Values for MAXRATE register for 155Mbps and 25.6 Mbps operation */
+#define RATE155 0x64b1 // 16 bits float format
+#define MAX_ATM_155 352768 // Cells/second p.118
+#define RATE25 0x5f9d
+
+#define STPARMS 0x03
+#define STPARMS_1K 0x008c
+#define STPARMS_2K 0x0049
+#define STPARMS_4K 0x0026
+#define COMP_EN 0x4000
+#define CBR_EN 0x2000
+#define ABR_EN 0x0800
+#define UBR_EN 0x0400
+
+#define ABRUBR_ARB 0x04
+#define RM_TYPE 0x05
+/*Value for RM_TYPE register for ATM Forum Traffic Mangement4.0 support*/
+#define RM_TYPE_4_0 0x0100
+
+#define SEG_COMMAND_REG 0x17
+/* Values for the command register */
+#define RESET_SEG 0x0055
+#define RESET_SEG_STATE 0x00aa
+#define RESET_TX_CELL_CTR 0x00cc
+
+#define CBR_PTR_BASE 0x20
+#define ABR_SBPTR_BASE 0x22
+#define UBR_SBPTR_BASE 0x23
+#define ABRWQ_BASE 0x26
+#define UBRWQ_BASE 0x27
+#define VCT_BASE 0x28
+#define VCTE_BASE 0x29
+#define CBR_TAB_BEG 0x2c
+#define CBR_TAB_END 0x2d
+#define PRQ_ST_ADR 0x30
+#define PRQ_ED_ADR 0x31
+#define PRQ_RD_PTR 0x32
+#define PRQ_WR_PTR 0x33
+#define TCQ_ST_ADR 0x34
+#define TCQ_ED_ADR 0x35
+#define TCQ_RD_PTR 0x36
+#define TCQ_WR_PTR 0x37
+#define SEG_QUEUE_BASE 0x40
+#define SEG_DESC_BASE 0x41
+#define MODE_REG_0 0x45
+#define T_ONLINE 0x0002 /* (i)chipSAR is online */
+
+#define MODE_REG_1 0x46
+#define MODE_REG_1_VAL 0x0400 /*for propoer device operation*/
+
+#define SEG_INTR_STATUS_REG 0x47
+#define SEG_MASK_REG 0x48
+#define TRANSMIT_DONE 0x0200
+#define TCQ_NOT_EMPTY 0x1000 /* this can be used for both the interrupt
+ status registers as well as the mask register */
+
+#define CELL_CTR_HIGH_AUTO 0x49
+#define CELL_CTR_HIGH_NOAUTO 0xc9
+#define CELL_CTR_LO_AUTO 0x4a
+#define CELL_CTR_LO_NOAUTO 0xca
+
+/* Diagnostic registers */
+#define NEXTDESC 0x59
+#define NEXTVC 0x5a
+#define PSLOTCNT 0x5d
+#define NEWDN 0x6a
+#define NEWVC 0x6b
+#define SBPTR 0x6c
+#define ABRWQ_WRPTR 0x6f
+#define ABRWQ_RDPTR 0x70
+#define UBRWQ_WRPTR 0x71
+#define UBRWQ_RDPTR 0x72
+#define CBR_VC 0x73
+#define ABR_SBVC 0x75
+#define UBR_SBVC 0x76
+#define ABRNEXTLINK 0x78
+#define UBRNEXTLINK 0x79
+
+
+/*----------------- Reassembly control registers ---------------------*/
+/* The reassembly registers are 16 bits access and the addresses
+ are defined as such so the addresses are the actual "offsets" */
+#define MODE_REG 0x00
+#define R_ONLINE 0x0002 /* (i)chip is online */
+#define IGN_RAW_FL 0x0004
+
+#define PROTOCOL_ID 0x01
+#define REASS_MASK_REG 0x02
+#define REASS_INTR_STATUS_REG 0x03
+/* Interrupt Status register bits */
+#define RX_PKT_CTR_OF 0x8000
+#define RX_ERR_CTR_OF 0x4000
+#define RX_CELL_CTR_OF 0x1000
+#define RX_FREEQ_EMPT 0x0200
+#define RX_EXCPQ_FL 0x0080
+#define RX_RAWQ_FL 0x0010
+#define RX_EXCP_RCVD 0x0008
+#define RX_PKT_RCVD 0x0004
+#define RX_RAW_RCVD 0x0001
+
+#define DRP_PKT_CNTR 0x04
+#define ERR_CNTR 0x05
+#define RAW_BASE_ADR 0x08
+#define CELL_CTR0 0x0c
+#define CELL_CTR1 0x0d
+#define REASS_COMMAND_REG 0x0f
+/* Values for command register */
+#define RESET_REASS 0x0055
+#define RESET_REASS_STATE 0x00aa
+#define RESET_DRP_PKT_CNTR 0x00f1
+#define RESET_ERR_CNTR 0x00f2
+#define RESET_CELL_CNTR 0x00f8
+#define RESET_REASS_ALL_REGS 0x00ff
+
+#define REASS_DESC_BASE 0x10
+#define VC_LKUP_BASE 0x11
+#define REASS_TABLE_BASE 0x12
+#define REASS_QUEUE_BASE 0x13
+#define PKT_TM_CNT 0x16
+#define TMOUT_RANGE 0x17
+#define INTRVL_CNTR 0x18
+#define TMOUT_INDX 0x19
+#define VP_LKUP_BASE 0x1c
+#define VP_FILTER 0x1d
+#define ABR_LKUP_BASE 0x1e
+#define FREEQ_ST_ADR 0x24
+#define FREEQ_ED_ADR 0x25
+#define FREEQ_RD_PTR 0x26
+#define FREEQ_WR_PTR 0x27
+#define PCQ_ST_ADR 0x28
+#define PCQ_ED_ADR 0x29
+#define PCQ_RD_PTR 0x2a
+#define PCQ_WR_PTR 0x2b
+#define EXCP_Q_ST_ADR 0x2c
+#define EXCP_Q_ED_ADR 0x2d
+#define EXCP_Q_RD_PTR 0x2e
+#define EXCP_Q_WR_PTR 0x2f
+#define CC_FIFO_ST_ADR 0x34
+#define CC_FIFO_ED_ADR 0x35
+#define CC_FIFO_RD_PTR 0x36
+#define CC_FIFO_WR_PTR 0x37
+#define STATE_REG 0x38
+#define BUF_SIZE 0x42
+#define XTRA_RM_OFFSET 0x44
+#define DRP_PKT_CNTR_NC 0x84
+#define ERR_CNTR_NC 0x85
+#define CELL_CNTR0_NC 0x8c
+#define CELL_CNTR1_NC 0x8d
+
+/* State Register bits */
+#define EXCPQ_EMPTY 0x0040
+#define PCQ_EMPTY 0x0010
+#define FREEQ_EMPTY 0x0004
+
+
+/*----------------- Front End registers/ DMA control --------------*/
+/* There is a lot of documentation error regarding these offsets ???
+ eg:- 2 offsets given 800, a00 for rx counter
+ similarly many others
+ Remember again that the offsets are to be 4*register number, so
+ correct the #defines here
+*/
+#define IPHASE5575_TX_COUNTER 0x200 /* offset - 0x800 */
+#define IPHASE5575_RX_COUNTER 0x280 /* offset - 0xa00 */
+#define IPHASE5575_TX_LIST_ADDR 0x300 /* offset - 0xc00 */
+#define IPHASE5575_RX_LIST_ADDR 0x380 /* offset - 0xe00 */
+
+/*--------------------------- RAM ---------------------------*/
+/* These memory maps are actually offsets from the segmentation and reassembly RAM base addresses */
+
+/* Segmentation Control Memory map */
+#define TX_DESC_BASE 0x0000 /* Buffer Decriptor Table */
+#define TX_COMP_Q 0x1000 /* Transmit Complete Queue */
+#define PKT_RDY_Q 0x1400 /* Packet Ready Queue */
+#define CBR_SCHED_TABLE 0x1800 /* CBR Table */
+#define UBR_SCHED_TABLE 0x3000 /* UBR Table */
+#define UBR_WAIT_Q 0x4000 /* UBR Wait Queue */
+#define ABR_SCHED_TABLE 0x5000 /* ABR Table */
+#define ABR_WAIT_Q 0x5800 /* ABR Wait Queue */
+#define EXT_VC_TABLE 0x6000 /* Extended VC Table */
+#define MAIN_VC_TABLE 0x8000 /* Main VC Table */
+#define SCHEDSZ 1024 /* ABR and UBR Scheduling Table size */
+#define TX_DESC_TABLE_SZ 128 /* Number of entries in the Transmit
+ Buffer Descriptor Table */
+
+/* These are used as table offsets in Descriptor Table address generation */
+#define DESC_MODE 0x0
+#define VC_INDEX 0x1
+#define BYTE_CNT 0x3
+#define PKT_START_HI 0x4
+#define PKT_START_LO 0x5
+
+/* Descriptor Mode Word Bits */
+#define EOM_EN 0x0800
+#define AAL5 0x0100
+#define APP_CRC32 0x0400
+#define CMPL_INT 0x1000
+
+#define TABLE_ADDRESS(db, dn, to) \
+ (((unsigned long)(db & 0x04)) << 16) | (dn << 5) | (to << 1)
+
+/* Reassembly Control Memory Map */
+#define RX_DESC_BASE 0x0000 /* Buffer Descriptor Table */
+#define VP_TABLE 0x5c00 /* VP Table */
+#define EXCEPTION_Q 0x5e00 /* Exception Queue */
+#define FREE_BUF_DESC_Q 0x6000 /* Free Buffer Descriptor Queue */
+#define PKT_COMP_Q 0x6800 /* Packet Complete Queue */
+#define REASS_TABLE 0x7000 /* Reassembly Table */
+#define RX_VC_TABLE 0x7800 /* VC Table */
+#define ABR_VC_TABLE 0x8000 /* ABR VC Table */
+#define RX_DESC_TABLE_SZ 736 /* Number of entries in the Receive
+ Buffer Descriptor Table */
+#define VP_TABLE_SZ 256 /* Number of entries in VPTable */
+#define RX_VC_TABLE_SZ 1024 /* Number of entries in VC Table */
+#define REASS_TABLE_SZ 1024 /* Number of entries in Reassembly Table */
+ /* Buffer Descriptor Table */
+#define RX_ACT 0x8000
+#define RX_VPVC 0x4000
+#define RX_CNG 0x0040
+#define RX_CER 0x0008
+#define RX_PTE 0x0004
+#define RX_OFL 0x0002
+#define NUM_RX_EXCP 32
+
+/* Reassembly Table */
+#define NO_AAL5_PKT 0x0000
+#define AAL5_PKT_REASSEMBLED 0x4000
+#define AAL5_PKT_TERMINATED 0x8000
+#define RAW_PKT 0xc000
+#define REASS_ABR 0x2000
+
+/*-------------------- Base Registers --------------------*/
+#define REG_BASE IPHASE5575_BUS_CONTROL_REG_BASE
+#define RAM_BASE IPHASE5575_FRAG_CONTROL_RAM_BASE
+#define PHY_BASE IPHASE5575_FRONT_END_REG_BASE
+#define SEG_BASE IPHASE5575_FRAG_CONTROL_REG_BASE
+#define REASS_BASE IPHASE5575_REASS_CONTROL_REG_BASE
+
+typedef volatile u_int ffreg_t;
+typedef u_int rreg_t;
+
+typedef struct _ffredn_t {
+ ffreg_t idlehead_high; /* Idle cell header (high) */
+ ffreg_t idlehead_low; /* Idle cell header (low) */
+ ffreg_t maxrate; /* Maximum rate */
+ ffreg_t stparms; /* Traffic Management Parameters */
+ ffreg_t abrubr_abr; /* ABRUBR Priority Byte 1, TCR Byte 0 */
+ ffreg_t rm_type; /* */
+ u_int filler5[0x17 - 0x06];
+ ffreg_t cmd_reg; /* Command register */
+ u_int filler18[0x20 - 0x18];
+ ffreg_t cbr_base; /* CBR Pointer Base */
+ ffreg_t vbr_base; /* VBR Pointer Base */
+ ffreg_t abr_base; /* ABR Pointer Base */
+ ffreg_t ubr_base; /* UBR Pointer Base */
+ u_int filler24;
+ ffreg_t vbrwq_base; /* VBR Wait Queue Base */
+ ffreg_t abrwq_base; /* ABR Wait Queue Base */
+ ffreg_t ubrwq_base; /* UBR Wait Queue Base */
+ ffreg_t vct_base; /* Main VC Table Base */
+ ffreg_t vcte_base; /* Extended Main VC Table Base */
+ u_int filler2a[0x2C - 0x2A];
+ ffreg_t cbr_tab_beg; /* CBR Table Begin */
+ ffreg_t cbr_tab_end; /* CBR Table End */
+ ffreg_t cbr_pointer; /* CBR Pointer */
+ u_int filler2f[0x30 - 0x2F];
+ ffreg_t prq_st_adr; /* Packet Ready Queue Start Address */
+ ffreg_t prq_ed_adr; /* Packet Ready Queue End Address */
+ ffreg_t prq_rd_ptr; /* Packet Ready Queue read pointer */
+ ffreg_t prq_wr_ptr; /* Packet Ready Queue write pointer */
+ ffreg_t tcq_st_adr; /* Transmit Complete Queue Start Address*/
+ ffreg_t tcq_ed_adr; /* Transmit Complete Queue End Address */
+ ffreg_t tcq_rd_ptr; /* Transmit Complete Queue read pointer */
+ ffreg_t tcq_wr_ptr; /* Transmit Complete Queue write pointer*/
+ u_int filler38[0x40 - 0x38];
+ ffreg_t queue_base; /* Base address for PRQ and TCQ */
+ ffreg_t desc_base; /* Base address of descriptor table */
+ u_int filler42[0x45 - 0x42];
+ ffreg_t mode_reg_0; /* Mode register 0 */
+ ffreg_t mode_reg_1; /* Mode register 1 */
+ ffreg_t intr_status_reg;/* Interrupt Status register */
+ ffreg_t mask_reg; /* Mask Register */
+ ffreg_t cell_ctr_high1; /* Total cell transfer count (high) */
+ ffreg_t cell_ctr_lo1; /* Total cell transfer count (low) */
+ ffreg_t state_reg; /* Status register */
+ u_int filler4c[0x58 - 0x4c];
+ ffreg_t curr_desc_num; /* Contains the current descriptor num */
+ ffreg_t next_desc; /* Next descriptor */
+ ffreg_t next_vc; /* Next VC */
+ u_int filler5b[0x5d - 0x5b];
+ ffreg_t present_slot_cnt;/* Present slot count */
+ u_int filler5e[0x6a - 0x5e];
+ ffreg_t new_desc_num; /* New descriptor number */
+ ffreg_t new_vc; /* New VC */
+ ffreg_t sched_tbl_ptr; /* Schedule table pointer */
+ ffreg_t vbrwq_wptr; /* VBR wait queue write pointer */
+ ffreg_t vbrwq_rptr; /* VBR wait queue read pointer */
+ ffreg_t abrwq_wptr; /* ABR wait queue write pointer */
+ ffreg_t abrwq_rptr; /* ABR wait queue read pointer */
+ ffreg_t ubrwq_wptr; /* UBR wait queue write pointer */
+ ffreg_t ubrwq_rptr; /* UBR wait queue read pointer */
+ ffreg_t cbr_vc; /* CBR VC */
+ ffreg_t vbr_sb_vc; /* VBR SB VC */
+ ffreg_t abr_sb_vc; /* ABR SB VC */
+ ffreg_t ubr_sb_vc; /* UBR SB VC */
+ ffreg_t vbr_next_link; /* VBR next link */
+ ffreg_t abr_next_link; /* ABR next link */
+ ffreg_t ubr_next_link; /* UBR next link */
+ u_int filler7a[0x7c-0x7a];
+ ffreg_t out_rate_head; /* Out of rate head */
+ u_int filler7d[0xca-0x7d]; /* pad out to full address space */
+ ffreg_t cell_ctr_high1_nc;/* Total cell transfer count (high) */
+ ffreg_t cell_ctr_lo1_nc;/* Total cell transfer count (low) */
+ u_int fillercc[0x100-0xcc]; /* pad out to full address space */
+} ffredn_t;
+
+typedef struct _rfredn_t {
+ rreg_t mode_reg_0; /* Mode register 0 */
+ rreg_t protocol_id; /* Protocol ID */
+ rreg_t mask_reg; /* Mask Register */
+ rreg_t intr_status_reg;/* Interrupt status register */
+ rreg_t drp_pkt_cntr; /* Dropped packet cntr (clear on read) */
+ rreg_t err_cntr; /* Error Counter (cleared on read) */
+ u_int filler6[0x08 - 0x06];
+ rreg_t raw_base_adr; /* Base addr for raw cell Q */
+ u_int filler2[0x0c - 0x09];
+ rreg_t cell_ctr0; /* Cell Counter 0 (cleared when read) */
+ rreg_t cell_ctr1; /* Cell Counter 1 (cleared when read) */
+ u_int filler3[0x0f - 0x0e];
+ rreg_t cmd_reg; /* Command register */
+ rreg_t desc_base; /* Base address for description table */
+ rreg_t vc_lkup_base; /* Base address for VC lookup table */
+ rreg_t reass_base; /* Base address for reassembler table */
+ rreg_t queue_base; /* Base address for Communication queue */
+ u_int filler14[0x16 - 0x14];
+ rreg_t pkt_tm_cnt; /* Packet Timeout and count register */
+ rreg_t tmout_range; /* Range of reassembley IDs for timeout */
+ rreg_t intrvl_cntr; /* Packet aging interval counter */
+ rreg_t tmout_indx; /* index of pkt being tested for aging */
+ u_int filler1a[0x1c - 0x1a];
+ rreg_t vp_lkup_base; /* Base address for VP lookup table */
+ rreg_t vp_filter; /* VP filter register */
+ rreg_t abr_lkup_base; /* Base address of ABR VC Table */
+ u_int filler1f[0x24 - 0x1f];
+ rreg_t fdq_st_adr; /* Free desc queue start address */
+ rreg_t fdq_ed_adr; /* Free desc queue end address */
+ rreg_t fdq_rd_ptr; /* Free desc queue read pointer */
+ rreg_t fdq_wr_ptr; /* Free desc queue write pointer */
+ rreg_t pcq_st_adr; /* Packet Complete queue start address */
+ rreg_t pcq_ed_adr; /* Packet Complete queue end address */
+ rreg_t pcq_rd_ptr; /* Packet Complete queue read pointer */
+ rreg_t pcq_wr_ptr; /* Packet Complete queue write pointer */
+ rreg_t excp_st_adr; /* Exception queue start address */
+ rreg_t excp_ed_adr; /* Exception queue end address */
+ rreg_t excp_rd_ptr; /* Exception queue read pointer */
+ rreg_t excp_wr_ptr; /* Exception queue write pointer */
+ u_int filler30[0x34 - 0x30];
+ rreg_t raw_st_adr; /* Raw Cell start address */
+ rreg_t raw_ed_adr; /* Raw Cell end address */
+ rreg_t raw_rd_ptr; /* Raw Cell read pointer */
+ rreg_t raw_wr_ptr; /* Raw Cell write pointer */
+ rreg_t state_reg; /* State Register */
+ u_int filler39[0x42 - 0x39];
+ rreg_t buf_size; /* Buffer size */
+ u_int filler43;
+ rreg_t xtra_rm_offset; /* Offset of the additional turnaround RM */
+ u_int filler45[0x84 - 0x45];
+ rreg_t drp_pkt_cntr_nc;/* Dropped Packet cntr, Not clear on rd */
+ rreg_t err_cntr_nc; /* Error Counter, Not clear on read */
+ u_int filler86[0x8c - 0x86];
+ rreg_t cell_ctr0_nc; /* Cell Counter 0, Not clear on read */
+ rreg_t cell_ctr1_nc; /* Cell Counter 1, Not clear on read */
+ u_int filler8e[0x100-0x8e]; /* pad out to full address space */
+} rfredn_t;
+
+typedef struct {
+ /* Atlantic */
+ ffredn_t ffredn; /* F FRED */
+ rfredn_t rfredn; /* R FRED */
+} ia_regs_t;
+
+typedef struct {
+ u_short f_vc_type; /* VC type */
+ u_short f_nrm; /* Nrm */
+ u_short f_nrmexp; /* Nrm Exp */
+ u_short reserved6; /* */
+ u_short f_crm; /* Crm */
+ u_short reserved10; /* Reserved */
+ u_short reserved12; /* Reserved */
+ u_short reserved14; /* Reserved */
+ u_short last_cell_slot; /* last_cell_slot_count */
+ u_short f_pcr; /* Peak Cell Rate */
+ u_short fraction; /* fraction */
+ u_short f_icr; /* Initial Cell Rate */
+ u_short f_cdf; /* */
+ u_short f_mcr; /* Minimum Cell Rate */
+ u_short f_acr; /* Allowed Cell Rate */
+ u_short f_status; /* */
+} f_vc_abr_entry;
+
+typedef struct {
+ u_short r_status_rdf; /* status + RDF */
+ u_short r_air; /* AIR */
+ u_short reserved4[14]; /* Reserved */
+} r_vc_abr_entry;
+
+#define MRM 3
+
+typedef struct srv_cls_param {
+ u32 class_type; /* CBR/VBR/ABR/UBR; use the enum above */
+ u32 pcr; /* Peak Cell Rate (24-bit) */
+ /* VBR parameters */
+ u32 scr; /* sustainable cell rate */
+ u32 max_burst_size; /* ?? cell rate or data rate */
+
+ /* ABR only UNI 4.0 Parameters */
+ u32 mcr; /* Min Cell Rate (24-bit) */
+ u32 icr; /* Initial Cell Rate (24-bit) */
+ u32 tbe; /* Transient Buffer Exposure (24-bit) */
+ u32 frtt; /* Fixed Round Trip Time (24-bit) */
+
+#if 0 /* Additional Parameters of TM 4.0 */
+bits 31 30 29 28 27-25 24-22 21-19 18-9
+-----------------------------------------------------------------------------
+| NRM present | TRM prsnt | CDF prsnt | ADTF prsnt | NRM | TRM | CDF | ADTF |
+-----------------------------------------------------------------------------
+#endif /* 0 */
+
+ u8 nrm; /* Max # of Cells for each forward RM
+ cell (3-bit) */
+ u8 trm; /* Time between forward RM cells (3-bit) */
+ u16 adtf; /* ACR Decrease Time Factor (10-bit) */
+ u8 cdf; /* Cutoff Decrease Factor (3-bit) */
+ u8 rif; /* Rate Increment Factor (4-bit) */
+ u8 rdf; /* Rate Decrease Factor (4-bit) */
+ u8 reserved; /* 8 bits to keep structure word aligned */
+} srv_cls_param_t;
+
+struct testTable_t {
+ u16 lastTime;
+ u16 fract;
+ u8 vc_status;
+};
+
+typedef struct {
+ u16 vci;
+ u16 error;
+} RX_ERROR_Q;
+
+typedef struct {
+ u8 active: 1;
+ u8 abr: 1;
+ u8 ubr: 1;
+ u8 cnt: 5;
+#define VC_ACTIVE 0x01
+#define VC_ABR 0x02
+#define VC_UBR 0x04
+} vcstatus_t;
+
+struct ia_rfL_t {
+ u32 fdq_st; /* Free desc queue start address */
+ u32 fdq_ed; /* Free desc queue end address */
+ u32 fdq_rd; /* Free desc queue read pointer */
+ u32 fdq_wr; /* Free desc queue write pointer */
+ u32 pcq_st; /* Packet Complete queue start address */
+ u32 pcq_ed; /* Packet Complete queue end address */
+ u32 pcq_rd; /* Packet Complete queue read pointer */
+ u32 pcq_wr; /* Packet Complete queue write pointer */
+};
+
+struct ia_ffL_t {
+ u32 prq_st; /* Packet Ready Queue Start Address */
+ u32 prq_ed; /* Packet Ready Queue End Address */
+ u32 prq_wr; /* Packet Ready Queue write pointer */
+ u32 tcq_st; /* Transmit Complete Queue Start Address*/
+ u32 tcq_ed; /* Transmit Complete Queue End Address */
+ u32 tcq_rd; /* Transmit Complete Queue read pointer */
+};
+
+struct desc_tbl_t {
+ u32 timestamp;
+ struct ia_vcc *iavcc;
+ struct sk_buff *txskb;
+};
+
+typedef struct ia_rtn_q {
+ struct desc_tbl_t data;
+ struct ia_rtn_q *next, *tail;
+} IARTN_Q;
+
+#define SUNI_LOSV 0x04
+enum ia_suni {
+ SUNI_MASTER_RESET = 0x000, /* SUNI Master Reset and Identity */
+ SUNI_MASTER_CONFIG = 0x004, /* SUNI Master Configuration */
+ SUNI_MASTER_INTR_STAT = 0x008, /* SUNI Master Interrupt Status */
+ SUNI_RESERVED1 = 0x00c, /* Reserved */
+ SUNI_MASTER_CLK_MONITOR = 0x010, /* SUNI Master Clock Monitor */
+ SUNI_MASTER_CONTROL = 0x014, /* SUNI Master Clock Monitor */
+ /* Reserved (10) */
+ SUNI_RSOP_CONTROL = 0x040, /* RSOP Control/Interrupt Enable */
+ SUNI_RSOP_STATUS = 0x044, /* RSOP Status/Interrupt States */
+ SUNI_RSOP_SECTION_BIP8L = 0x048, /* RSOP Section BIP-8 LSB */
+ SUNI_RSOP_SECTION_BIP8M = 0x04c, /* RSOP Section BIP-8 MSB */
+
+ SUNI_TSOP_CONTROL = 0x050, /* TSOP Control */
+ SUNI_TSOP_DIAG = 0x054, /* TSOP Disgnostics */
+ /* Reserved (2) */
+ SUNI_RLOP_CS = 0x060, /* RLOP Control/Status */
+ SUNI_RLOP_INTR = 0x064, /* RLOP Interrupt Enable/Status */
+ SUNI_RLOP_LINE_BIP24L = 0x068, /* RLOP Line BIP-24 LSB */
+ SUNI_RLOP_LINE_BIP24 = 0x06c, /* RLOP Line BIP-24 */
+ SUNI_RLOP_LINE_BIP24M = 0x070, /* RLOP Line BIP-24 MSB */
+ SUNI_RLOP_LINE_FEBEL = 0x074, /* RLOP Line FEBE LSB */
+ SUNI_RLOP_LINE_FEBE = 0x078, /* RLOP Line FEBE */
+ SUNI_RLOP_LINE_FEBEM = 0x07c, /* RLOP Line FEBE MSB */
+
+ SUNI_TLOP_CONTROL = 0x080, /* TLOP Control */
+ SUNI_TLOP_DISG = 0x084, /* TLOP Disgnostics */
+ /* Reserved (14) */
+ SUNI_RPOP_CS = 0x0c0, /* RPOP Status/Control */
+ SUNI_RPOP_INTR = 0x0c4, /* RPOP Interrupt/Status */
+ SUNI_RPOP_RESERVED = 0x0c8, /* RPOP Reserved */
+ SUNI_RPOP_INTR_ENA = 0x0cc, /* RPOP Interrupt Enable */
+ /* Reserved (3) */
+ SUNI_RPOP_PATH_SIG = 0x0dc, /* RPOP Path Signal Label */
+ SUNI_RPOP_BIP8L = 0x0e0, /* RPOP Path BIP-8 LSB */
+ SUNI_RPOP_BIP8M = 0x0e4, /* RPOP Path BIP-8 MSB */
+ SUNI_RPOP_FEBEL = 0x0e8, /* RPOP Path FEBE LSB */
+ SUNI_RPOP_FEBEM = 0x0ec, /* RPOP Path FEBE MSB */
+ /* Reserved (4) */
+ SUNI_TPOP_CNTRL_DAIG = 0x100, /* TPOP Control/Disgnostics */
+ SUNI_TPOP_POINTER_CTRL = 0x104, /* TPOP Pointer Control */
+ SUNI_TPOP_SOURCER_CTRL = 0x108, /* TPOP Source Control */
+ /* Reserved (2) */
+ SUNI_TPOP_ARB_PRTL = 0x114, /* TPOP Arbitrary Pointer LSB */
+ SUNI_TPOP_ARB_PRTM = 0x118, /* TPOP Arbitrary Pointer MSB */
+ SUNI_TPOP_RESERVED2 = 0x11c, /* TPOP Reserved */
+ SUNI_TPOP_PATH_SIG = 0x120, /* TPOP Path Signal Lable */
+ SUNI_TPOP_PATH_STATUS = 0x124, /* TPOP Path Status */
+ /* Reserved (6) */
+ SUNI_RACP_CS = 0x140, /* RACP Control/Status */
+ SUNI_RACP_INTR = 0x144, /* RACP Interrupt Enable/Status */
+ SUNI_RACP_HDR_PATTERN = 0x148, /* RACP Match Header Pattern */
+ SUNI_RACP_HDR_MASK = 0x14c, /* RACP Match Header Mask */
+ SUNI_RACP_CORR_HCS = 0x150, /* RACP Correctable HCS Error Count */
+ SUNI_RACP_UNCORR_HCS = 0x154, /* RACP Uncorrectable HCS Err Count */
+ /* Reserved (10) */
+ SUNI_TACP_CONTROL = 0x180, /* TACP Control */
+ SUNI_TACP_IDLE_HDR_PAT = 0x184, /* TACP Idle Cell Header Pattern */
+ SUNI_TACP_IDLE_PAY_PAY = 0x188, /* TACP Idle Cell Payld Octet Patrn */
+ /* Reserved (5) */
+ /* Reserved (24) */
+ /* FIXME: unused but name conflicts.
+ * SUNI_MASTER_TEST = 0x200, SUNI Master Test */
+ SUNI_RESERVED_TEST = 0x204 /* SUNI Reserved for Test */
+};
+
+typedef struct _SUNI_STATS_
+{
+ u32 valid; // 1 = oc3 PHY card
+ u32 carrier_detect; // GPIN input
+ // RSOP: receive section overhead processor
+ u16 rsop_oof_state; // 1 = out of frame
+ u16 rsop_lof_state; // 1 = loss of frame
+ u16 rsop_los_state; // 1 = loss of signal
+ u32 rsop_los_count; // loss of signal count
+ u32 rsop_bse_count; // section BIP-8 error count
+ // RLOP: receive line overhead processor
+ u16 rlop_ferf_state; // 1 = far end receive failure
+ u16 rlop_lais_state; // 1 = line AIS
+ u32 rlop_lbe_count; // BIP-24 count
+ u32 rlop_febe_count; // FEBE count;
+ // RPOP: receive path overhead processor
+ u16 rpop_lop_state; // 1 = LOP
+ u16 rpop_pais_state; // 1 = path AIS
+ u16 rpop_pyel_state; // 1 = path yellow alert
+ u32 rpop_bip_count; // path BIP-8 error count
+ u32 rpop_febe_count; // path FEBE error count
+ u16 rpop_psig; // path signal label value
+ // RACP: receive ATM cell processor
+ u16 racp_hp_state; // hunt/presync state
+ u32 racp_fu_count; // FIFO underrun count
+ u32 racp_fo_count; // FIFO overrun count
+ u32 racp_chcs_count; // correctable HCS error count
+ u32 racp_uchcs_count; // uncorrectable HCS error count
+} IA_SUNI_STATS;
+
+typedef struct iadev_priv {
+ /*-----base pointers into (i)chipSAR+ address space */
+ u32 __iomem *phy; /* Base pointer into phy (SUNI). */
+ u32 __iomem *dma; /* Base pointer into DMA control registers. */
+ u32 __iomem *reg; /* Base pointer to SAR registers. */
+ u32 __iomem *seg_reg; /* base pointer to segmentation engine
+ internal registers */
+ u32 __iomem *reass_reg; /* base pointer to reassemble engine
+ internal registers */
+ u32 __iomem *ram; /* base pointer to SAR RAM */
+ void __iomem *seg_ram;
+ void __iomem *reass_ram;
+ struct dle_q tx_dle_q;
+ struct free_desc_q *tx_free_desc_qhead;
+ struct sk_buff_head tx_dma_q, tx_backlog;
+ spinlock_t tx_lock;
+ IARTN_Q tx_return_q;
+ u32 close_pending;
+ wait_queue_head_t close_wait;
+ wait_queue_head_t timeout_wait;
+ struct cpcs_trailer_desc *tx_buf;
+ u16 num_tx_desc, tx_buf_sz, rate_limit;
+ u32 tx_cell_cnt, tx_pkt_cnt;
+ void __iomem *MAIN_VC_TABLE_ADDR, *EXT_VC_TABLE_ADDR, *ABR_SCHED_TABLE_ADDR;
+ struct dle_q rx_dle_q;
+ struct free_desc_q *rx_free_desc_qhead;
+ struct sk_buff_head rx_dma_q;
+ spinlock_t rx_lock;
+ struct atm_vcc **rx_open; /* list of all open VCs */
+ u16 num_rx_desc, rx_buf_sz, rxing;
+ u32 rx_pkt_ram, rx_tmp_cnt;
+ unsigned long rx_tmp_jif;
+ void __iomem *RX_DESC_BASE_ADDR;
+ u32 drop_rxpkt, drop_rxcell, rx_cell_cnt, rx_pkt_cnt;
+ struct atm_dev *next_board; /* other iphase devices */
+ struct pci_dev *pci;
+ int mem;
+ unsigned int real_base; /* real and virtual base address */
+ void __iomem *base;
+ unsigned int pci_map_size; /*pci map size of board */
+ unsigned char irq;
+ unsigned char bus;
+ unsigned char dev_fn;
+ u_short phy_type;
+ u_short num_vc, memSize, memType;
+ struct ia_ffL_t ffL;
+ struct ia_rfL_t rfL;
+ /* Suni stat */
+ // IA_SUNI_STATS suni_stats;
+ unsigned char carrier_detect;
+ /* CBR related */
+ // transmit DMA & Receive
+ unsigned int tx_dma_cnt; // number of elements on dma queue
+ unsigned int rx_dma_cnt; // number of elements on rx dma queue
+ unsigned int NumEnabledCBR; // number of CBR VCI's enabled. CBR
+ // receive MARK for Cell FIFO
+ unsigned int rx_mark_cnt; // number of elements on mark queue
+ unsigned int CbrTotEntries; // Total CBR Entries in Scheduling Table.
+ unsigned int CbrRemEntries; // Remaining CBR Entries in Scheduling Table.
+ unsigned int CbrEntryPt; // CBR Sched Table Entry Point.
+ unsigned int Granularity; // CBR Granularity given Table Size.
+ /* ABR related */
+ unsigned int sum_mcr, sum_cbr, LineRate;
+ unsigned int n_abr;
+ struct desc_tbl_t *desc_tbl;
+ u_short host_tcq_wr;
+ struct testTable_t **testTable;
+ dma_addr_t tx_dle_dma;
+ dma_addr_t rx_dle_dma;
+} IADEV;
+
+
+#define INPH_IA_DEV(d) ((IADEV *) (d)->dev_data)
+#define INPH_IA_VCC(v) ((struct ia_vcc *) (v)->dev_data)
+
+/******************* IDT77105 25MB/s PHY DEFINE *****************************/
+enum ia_mb25 {
+ MB25_MASTER_CTRL = 0x00, /* Master control */
+ MB25_INTR_STATUS = 0x04, /* Interrupt status */
+ MB25_DIAG_CONTROL = 0x08, /* Diagnostic control */
+ MB25_LED_HEC = 0x0c, /* LED driver and HEC status/control */
+ MB25_LOW_BYTE_COUNTER = 0x10,
+ MB25_HIGH_BYTE_COUNTER = 0x14
+};
+
+/*
+ * Master Control
+ */
+#define MB25_MC_UPLO 0x80 /* UPLO */
+#define MB25_MC_DREC 0x40 /* Discard receive cell errors */
+#define MB25_MC_ECEIO 0x20 /* Enable Cell Error Interrupts Only */
+#define MB25_MC_TDPC 0x10 /* Transmit data parity check */
+#define MB25_MC_DRIC 0x08 /* Discard receive idle cells */
+#define MB25_MC_HALTTX 0x04 /* Halt Tx */
+#define MB25_MC_UMS 0x02 /* UTOPIA mode select */
+#define MB25_MC_ENABLED 0x01 /* Enable interrupt */
+
+/*
+ * Interrupt Status
+ */
+#define MB25_IS_GSB 0x40 /* GOOD Symbol Bit */
+#define MB25_IS_HECECR 0x20 /* HEC error cell received */
+#define MB25_IS_SCR 0x10 /* "Short Cell" Received */
+#define MB25_IS_TPE 0x08 /* Trnamsit Parity Error */
+#define MB25_IS_RSCC 0x04 /* Receive Signal Condition change */
+#define MB25_IS_RCSE 0x02 /* Received Cell Symbol Error */
+#define MB25_IS_RFIFOO 0x01 /* Received FIFO Overrun */
+
+/*
+ * Diagnostic Control
+ */
+#define MB25_DC_FTXCD 0x80 /* Force TxClav deassert */
+#define MB25_DC_RXCOS 0x40 /* RxClav operation select */
+#define MB25_DC_ECEIO 0x20 /* Single/Multi-PHY config select */
+#define MB25_DC_RLFLUSH 0x10 /* Clear receive FIFO */
+#define MB25_DC_IXPE 0x08 /* Insert xmit payload error */
+#define MB25_DC_IXHECE 0x04 /* Insert Xmit HEC Error */
+#define MB25_DC_LB_MASK 0x03 /* Loopback control mask */
+
+#define MB25_DC_LL 0x03 /* Line Loopback */
+#define MB25_DC_PL 0x02 /* PHY Loopback */
+#define MB25_DC_NM 0x00
+
+#define FE_MASK 0x00F0
+#define FE_MULTI_MODE 0x0000
+#define FE_SINGLE_MODE 0x0010
+#define FE_UTP_OPTION 0x0020
+#define FE_25MBIT_PHY 0x0040
+#define FE_DS3_PHY 0x0080 /* DS3 */
+#define FE_E3_PHY 0x0090 /* E3 */
+
+/*********************** SUNI_PM7345 PHY DEFINE HERE *********************/
+enum suni_pm7345 {
+ SUNI_CONFIG = 0x000, /* SUNI Configuration */
+ SUNI_INTR_ENBL = 0x004, /* SUNI Interrupt Enable */
+ SUNI_INTR_STAT = 0x008, /* SUNI Interrupt Status */
+ SUNI_CONTROL = 0x00c, /* SUNI Control */
+ SUNI_ID_RESET = 0x010, /* SUNI Reset and Identity */
+ SUNI_DATA_LINK_CTRL = 0x014,
+ SUNI_RBOC_CONF_INTR_ENBL = 0x018,
+ SUNI_RBOC_STAT = 0x01c,
+ SUNI_DS3_FRM_CFG = 0x020,
+ SUNI_DS3_FRM_INTR_ENBL = 0x024,
+ SUNI_DS3_FRM_INTR_STAT = 0x028,
+ SUNI_DS3_FRM_STAT = 0x02c,
+ SUNI_RFDL_CFG = 0x030,
+ SUNI_RFDL_ENBL_STAT = 0x034,
+ SUNI_RFDL_STAT = 0x038,
+ SUNI_RFDL_DATA = 0x03c,
+ SUNI_PMON_CHNG = 0x040,
+ SUNI_PMON_INTR_ENBL_STAT = 0x044,
+ /* SUNI_RESERVED1 (0x13 - 0x11) */
+ SUNI_PMON_LCV_EVT_CNT_LSB = 0x050,
+ SUNI_PMON_LCV_EVT_CNT_MSB = 0x054,
+ SUNI_PMON_FBE_EVT_CNT_LSB = 0x058,
+ SUNI_PMON_FBE_EVT_CNT_MSB = 0x05c,
+ SUNI_PMON_SEZ_DET_CNT_LSB = 0x060,
+ SUNI_PMON_SEZ_DET_CNT_MSB = 0x064,
+ SUNI_PMON_PE_EVT_CNT_LSB = 0x068,
+ SUNI_PMON_PE_EVT_CNT_MSB = 0x06c,
+ SUNI_PMON_PPE_EVT_CNT_LSB = 0x070,
+ SUNI_PMON_PPE_EVT_CNT_MSB = 0x074,
+ SUNI_PMON_FEBE_EVT_CNT_LSB = 0x078,
+ SUNI_PMON_FEBE_EVT_CNT_MSB = 0x07c,
+ SUNI_DS3_TRAN_CFG = 0x080,
+ SUNI_DS3_TRAN_DIAG = 0x084,
+ /* SUNI_RESERVED2 (0x23 - 0x21) */
+ SUNI_XFDL_CFG = 0x090,
+ SUNI_XFDL_INTR_ST = 0x094,
+ SUNI_XFDL_XMIT_DATA = 0x098,
+ SUNI_XBOC_CODE = 0x09c,
+ SUNI_SPLR_CFG = 0x0a0,
+ SUNI_SPLR_INTR_EN = 0x0a4,
+ SUNI_SPLR_INTR_ST = 0x0a8,
+ SUNI_SPLR_STATUS = 0x0ac,
+ SUNI_SPLT_CFG = 0x0b0,
+ SUNI_SPLT_CNTL = 0x0b4,
+ SUNI_SPLT_DIAG_G1 = 0x0b8,
+ SUNI_SPLT_F1 = 0x0bc,
+ SUNI_CPPM_LOC_METERS = 0x0c0,
+ SUNI_CPPM_CHG_OF_CPPM_PERF_METR = 0x0c4,
+ SUNI_CPPM_B1_ERR_CNT_LSB = 0x0c8,
+ SUNI_CPPM_B1_ERR_CNT_MSB = 0x0cc,
+ SUNI_CPPM_FRAMING_ERR_CNT_LSB = 0x0d0,
+ SUNI_CPPM_FRAMING_ERR_CNT_MSB = 0x0d4,
+ SUNI_CPPM_FEBE_CNT_LSB = 0x0d8,
+ SUNI_CPPM_FEBE_CNT_MSB = 0x0dc,
+ SUNI_CPPM_HCS_ERR_CNT_LSB = 0x0e0,
+ SUNI_CPPM_HCS_ERR_CNT_MSB = 0x0e4,
+ SUNI_CPPM_IDLE_UN_CELL_CNT_LSB = 0x0e8,
+ SUNI_CPPM_IDLE_UN_CELL_CNT_MSB = 0x0ec,
+ SUNI_CPPM_RCV_CELL_CNT_LSB = 0x0f0,
+ SUNI_CPPM_RCV_CELL_CNT_MSB = 0x0f4,
+ SUNI_CPPM_XMIT_CELL_CNT_LSB = 0x0f8,
+ SUNI_CPPM_XMIT_CELL_CNT_MSB = 0x0fc,
+ SUNI_RXCP_CTRL = 0x100,
+ SUNI_RXCP_FCTRL = 0x104,
+ SUNI_RXCP_INTR_EN_STS = 0x108,
+ SUNI_RXCP_IDLE_PAT_H1 = 0x10c,
+ SUNI_RXCP_IDLE_PAT_H2 = 0x110,
+ SUNI_RXCP_IDLE_PAT_H3 = 0x114,
+ SUNI_RXCP_IDLE_PAT_H4 = 0x118,
+ SUNI_RXCP_IDLE_MASK_H1 = 0x11c,
+ SUNI_RXCP_IDLE_MASK_H2 = 0x120,
+ SUNI_RXCP_IDLE_MASK_H3 = 0x124,
+ SUNI_RXCP_IDLE_MASK_H4 = 0x128,
+ SUNI_RXCP_CELL_PAT_H1 = 0x12c,
+ SUNI_RXCP_CELL_PAT_H2 = 0x130,
+ SUNI_RXCP_CELL_PAT_H3 = 0x134,
+ SUNI_RXCP_CELL_PAT_H4 = 0x138,
+ SUNI_RXCP_CELL_MASK_H1 = 0x13c,
+ SUNI_RXCP_CELL_MASK_H2 = 0x140,
+ SUNI_RXCP_CELL_MASK_H3 = 0x144,
+ SUNI_RXCP_CELL_MASK_H4 = 0x148,
+ SUNI_RXCP_HCS_CS = 0x14c,
+ SUNI_RXCP_LCD_CNT_THRESHOLD = 0x150,
+ /* SUNI_RESERVED3 (0x57 - 0x54) */
+ SUNI_TXCP_CTRL = 0x160,
+ SUNI_TXCP_INTR_EN_STS = 0x164,
+ SUNI_TXCP_IDLE_PAT_H1 = 0x168,
+ SUNI_TXCP_IDLE_PAT_H2 = 0x16c,
+ SUNI_TXCP_IDLE_PAT_H3 = 0x170,
+ SUNI_TXCP_IDLE_PAT_H4 = 0x174,
+ SUNI_TXCP_IDLE_PAT_H5 = 0x178,
+ SUNI_TXCP_IDLE_PAYLOAD = 0x17c,
+ SUNI_E3_FRM_FRAM_OPTIONS = 0x180,
+ SUNI_E3_FRM_MAINT_OPTIONS = 0x184,
+ SUNI_E3_FRM_FRAM_INTR_ENBL = 0x188,
+ SUNI_E3_FRM_FRAM_INTR_IND_STAT = 0x18c,
+ SUNI_E3_FRM_MAINT_INTR_ENBL = 0x190,
+ SUNI_E3_FRM_MAINT_INTR_IND = 0x194,
+ SUNI_E3_FRM_MAINT_STAT = 0x198,
+ SUNI_RESERVED4 = 0x19c,
+ SUNI_E3_TRAN_FRAM_OPTIONS = 0x1a0,
+ SUNI_E3_TRAN_STAT_DIAG_OPTIONS = 0x1a4,
+ SUNI_E3_TRAN_BIP_8_ERR_MASK = 0x1a8,
+ SUNI_E3_TRAN_MAINT_ADAPT_OPTS = 0x1ac,
+ SUNI_TTB_CTRL = 0x1b0,
+ SUNI_TTB_TRAIL_TRACE_ID_STAT = 0x1b4,
+ SUNI_TTB_IND_ADDR = 0x1b8,
+ SUNI_TTB_IND_DATA = 0x1bc,
+ SUNI_TTB_EXP_PAYLOAD_TYPE = 0x1c0,
+ SUNI_TTB_PAYLOAD_TYPE_CTRL_STAT = 0x1c4,
+ /* SUNI_PAD5 (0x7f - 0x71) */
+ SUNI_MASTER_TEST = 0x200,
+ /* SUNI_PAD6 (0xff - 0x80) */
+};
+
+#define SUNI_PM7345_T suni_pm7345_t
+#define SUNI_PM7345 0x20 /* Suni chip type */
+#define SUNI_PM5346 0x30 /* Suni chip type */
+/*
+ * SUNI_PM7345 Configuration
+ */
+#define SUNI_PM7345_CLB 0x01 /* Cell loopback */
+#define SUNI_PM7345_PLB 0x02 /* Payload loopback */
+#define SUNI_PM7345_DLB 0x04 /* Diagnostic loopback */
+#define SUNI_PM7345_LLB 0x80 /* Line loopback */
+#define SUNI_PM7345_E3ENBL 0x40 /* E3 enable bit */
+#define SUNI_PM7345_LOOPT 0x10 /* LOOPT enable bit */
+#define SUNI_PM7345_FIFOBP 0x20 /* FIFO bypass */
+#define SUNI_PM7345_FRMRBP 0x08 /* Framer bypass */
+/*
+ * DS3 FRMR Interrupt Enable
+ */
+#define SUNI_DS3_COFAE 0x80 /* Enable change of frame align */
+#define SUNI_DS3_REDE 0x40 /* Enable DS3 RED state intr */
+#define SUNI_DS3_CBITE 0x20 /* Enable Appl ID channel intr */
+#define SUNI_DS3_FERFE 0x10 /* Enable Far End Receive Failure intr*/
+#define SUNI_DS3_IDLE 0x08 /* Enable Idle signal intr */
+#define SUNI_DS3_AISE 0x04 /* Enable Alarm Indication signal intr*/
+#define SUNI_DS3_OOFE 0x02 /* Enable Out of frame intr */
+#define SUNI_DS3_LOSE 0x01 /* Enable Loss of signal intr */
+
+/*
+ * DS3 FRMR Status
+ */
+#define SUNI_DS3_ACE 0x80 /* Additional Configuration Reg */
+#define SUNI_DS3_REDV 0x40 /* DS3 RED state */
+#define SUNI_DS3_CBITV 0x20 /* Application ID channel state */
+#define SUNI_DS3_FERFV 0x10 /* Far End Receive Failure state*/
+#define SUNI_DS3_IDLV 0x08 /* Idle signal state */
+#define SUNI_DS3_AISV 0x04 /* Alarm Indication signal state*/
+#define SUNI_DS3_OOFV 0x02 /* Out of frame state */
+#define SUNI_DS3_LOSV 0x01 /* Loss of signal state */
+
+/*
+ * E3 FRMR Interrupt/Status
+ */
+#define SUNI_E3_CZDI 0x40 /* Consecutive Zeros indicator */
+#define SUNI_E3_LOSI 0x20 /* Loss of signal intr status */
+#define SUNI_E3_LCVI 0x10 /* Line code violation intr */
+#define SUNI_E3_COFAI 0x08 /* Change of frame align intr */
+#define SUNI_E3_OOFI 0x04 /* Out of frame intr status */
+#define SUNI_E3_LOS 0x02 /* Loss of signal state */
+#define SUNI_E3_OOF 0x01 /* Out of frame state */
+
+/*
+ * E3 FRMR Maintenance Status
+ */
+#define SUNI_E3_AISD 0x80 /* Alarm Indication signal state*/
+#define SUNI_E3_FERF_RAI 0x40 /* FERF/RAI indicator */
+#define SUNI_E3_FEBE 0x20 /* Far End Block Error indicator*/
+
+/*
+ * RXCP Control/Status
+ */
+#define SUNI_DS3_HCSPASS 0x80 /* Pass cell with HEC errors */
+#define SUNI_DS3_HCSDQDB 0x40 /* Control octets in HCS calc */
+#define SUNI_DS3_HCSADD 0x20 /* Add coset poly */
+#define SUNI_DS3_HCK 0x10 /* Control FIFO data path integ chk*/
+#define SUNI_DS3_BLOCK 0x08 /* Enable cell filtering */
+#define SUNI_DS3_DSCR 0x04 /* Disable payload descrambling */
+#define SUNI_DS3_OOCDV 0x02 /* Cell delineation state */
+#define SUNI_DS3_FIFORST 0x01 /* Cell FIFO reset */
+
+/*
+ * RXCP Interrupt Enable/Status
+ */
+#define SUNI_DS3_OOCDE 0x80 /* Intr enable, change in CDS */
+#define SUNI_DS3_HCSE 0x40 /* Intr enable, corr HCS errors */
+#define SUNI_DS3_FIFOE 0x20 /* Intr enable, unco HCS errors */
+#define SUNI_DS3_OOCDI 0x10 /* SYNC state */
+#define SUNI_DS3_UHCSI 0x08 /* Uncorr. HCS errors detected */
+#define SUNI_DS3_COCAI 0x04 /* Corr. HCS errors detected */
+#define SUNI_DS3_FOVRI 0x02 /* FIFO overrun */
+#define SUNI_DS3_FUDRI 0x01 /* FIFO underrun */
+
+///////////////////SUNI_PM7345 PHY DEFINE END /////////////////////////////
+
+/* ia_eeprom define*/
+#define MEM_SIZE_MASK 0x000F /* mask of 4 bits defining memory size*/
+#define MEM_SIZE_128K 0x0000 /* board has 128k buffer */
+#define MEM_SIZE_512K 0x0001 /* board has 512K of buffer */
+#define MEM_SIZE_1M 0x0002 /* board has 1M of buffer */
+ /* 0x3 to 0xF are reserved for future */
+
+#define FE_MASK 0x00F0 /* mask of 4 bits defining FE type */
+#define FE_MULTI_MODE 0x0000 /* 155 MBit multimode fiber */
+#define FE_SINGLE_MODE 0x0010 /* 155 MBit single mode laser */
+#define FE_UTP_OPTION 0x0020 /* 155 MBit UTP front end */
+
+#define NOVRAM_SIZE 64
+#define CMD_LEN 10
+
+/***********
+ *
+ * Switches and defines for header files.
+ *
+ * The following defines are used to turn on and off
+ * various options in the header files. Primarily useful
+ * for debugging.
+ *
+ ***********/
+
+/*
+ * a list of the commands that can be sent to the NOVRAM
+ */
+
+#define EXTEND 0x100
+#define IAWRITE 0x140
+#define IAREAD 0x180
+#define ERASE 0x1c0
+
+#define EWDS 0x00
+#define WRAL 0x10
+#define ERAL 0x20
+#define EWEN 0x30
+
+/*
+ * these bits duplicate the hw_flip.h register settings
+ * note: how the data in / out bits are defined in the flipper specification
+ */
+
+#define NVCE 0x02
+#define NVSK 0x01
+#define NVDO 0x08
+#define NVDI 0x04
+/***********************
+ *
+ * This define ands the value and the current config register and puts
+ * the result in the config register
+ *
+ ***********************/
+
+#define CFG_AND(val) { \
+ u32 t; \
+ t = readl(iadev->reg+IPHASE5575_EEPROM_ACCESS); \
+ t &= (val); \
+ writel(t, iadev->reg+IPHASE5575_EEPROM_ACCESS); \
+ }
+
+/***********************
+ *
+ * This define ors the value and the current config register and puts
+ * the result in the config register
+ *
+ ***********************/
+
+#define CFG_OR(val) { \
+ u32 t; \
+ t = readl(iadev->reg+IPHASE5575_EEPROM_ACCESS); \
+ t |= (val); \
+ writel(t, iadev->reg+IPHASE5575_EEPROM_ACCESS); \
+ }
+
+/***********************
+ *
+ * Send a command to the NOVRAM, the command is in cmd.
+ *
+ * clear CE and SK. Then assert CE.
+ * Clock each of the command bits out in the correct order with SK
+ * exit with CE still asserted
+ *
+ ***********************/
+
+#define NVRAM_CMD(cmd) { \
+ int i; \
+ u_short c = cmd; \
+ CFG_AND(~(NVCE|NVSK)); \
+ CFG_OR(NVCE); \
+ for (i=0; i<CMD_LEN; i++) { \
+ NVRAM_CLKOUT((c & (1 << (CMD_LEN - 1))) ? 1 : 0); \
+ c <<= 1; \
+ } \
+ }
+
+/***********************
+ *
+ * clear the CE, this must be used after each command is complete
+ *
+ ***********************/
+
+#define NVRAM_CLR_CE {CFG_AND(~NVCE)}
+
+/***********************
+ *
+ * clock the data bit in bitval out to the NOVRAM. The bitval must be
+ * a 1 or 0, or the clockout operation is undefined
+ *
+ ***********************/
+
+#define NVRAM_CLKOUT(bitval) { \
+ CFG_AND(~NVDI); \
+ CFG_OR((bitval) ? NVDI : 0); \
+ CFG_OR(NVSK); \
+ CFG_AND( ~NVSK); \
+ }
+
+/***********************
+ *
+ * clock the data bit in and return a 1 or 0, depending on the value
+ * that was received from the NOVRAM
+ *
+ ***********************/
+
+#define NVRAM_CLKIN(value) { \
+ u32 _t; \
+ CFG_OR(NVSK); \
+ CFG_AND(~NVSK); \
+ _t = readl(iadev->reg+IPHASE5575_EEPROM_ACCESS); \
+ value = (_t & NVDO) ? 1 : 0; \
+ }
+
+
+#endif /* IPHASE_H */