Linux-libre 4.2-gnu

1 files changed, 143 insertions, 20 deletions

diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index e843fdbe4..a638bbb1a 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -141,7 +141,7 @@ static bool driver_deferred_probe_enable = false;
  * more than one device is probing at the same time, it is possible for one
  * probe to complete successfully while another is about to defer. If the second
  * depends on the first, then it will get put on the pending list after the
- * trigger event has already occured and will be stuck there.
+ * trigger event has already occurred and will be stuck there.
  *
  * The atomic 'deferred_trigger_count' is used to determine if a successful
  * trigger has occurred in the midst of probing a driver. If the trigger count
@@ -417,31 +417,107 @@ int driver_probe_device(struct device_driver *drv, struct device *dev)
 	return ret;
 }
 
-static int __device_attach(struct device_driver *drv, void *data)
+bool driver_allows_async_probing(struct device_driver *drv)
 {
-	struct device *dev = data;
+	switch (drv->probe_type) {
+	case PROBE_PREFER_ASYNCHRONOUS:
+		return true;
+
+	case PROBE_FORCE_SYNCHRONOUS:
+		return false;
+
+	default:
+		if (module_requested_async_probing(drv->owner))
+			return true;
+
+		return false;
+	}
+}
+
+struct device_attach_data {
+	struct device *dev;
+
+	/*
+	 * Indicates whether we are are considering asynchronous probing or
+	 * not. Only initial binding after device or driver registration
+	 * (including deferral processing) may be done asynchronously, the
+	 * rest is always synchronous, as we expect it is being done by
+	 * request from userspace.
+	 */
+	bool check_async;
+
+	/*
+	 * Indicates if we are binding synchronous or asynchronous drivers.
+	 * When asynchronous probing is enabled we'll execute 2 passes
+	 * over drivers: first pass doing synchronous probing and second
+	 * doing asynchronous probing (if synchronous did not succeed -
+	 * most likely because there was no driver requiring synchronous
+	 * probing - and we found asynchronous driver during first pass).
+	 * The 2 passes are done because we can't shoot asynchronous
+	 * probe for given device and driver from bus_for_each_drv() since
+	 * driver pointer is not guaranteed to stay valid once
+	 * bus_for_each_drv() iterates to the next driver on the bus.
+	 */
+	bool want_async;
+
+	/*
+	 * We'll set have_async to 'true' if, while scanning for matching
+	 * driver, we'll encounter one that requests asynchronous probing.
+	 */
+	bool have_async;
+};
+
+static int __device_attach_driver(struct device_driver *drv, void *_data)
+{
+	struct device_attach_data *data = _data;
+	struct device *dev = data->dev;
+	bool async_allowed;
+
+	/*
+	 * Check if device has already been claimed. This may
+	 * happen with driver loading, device discovery/registration,
+	 * and deferred probe processing happens all at once with
+	 * multiple threads.
+	 */
+	if (dev->driver)
+		return -EBUSY;
 
 	if (!driver_match_device(drv, dev))
 		return 0;
 
+	async_allowed = driver_allows_async_probing(drv);
+
+	if (async_allowed)
+		data->have_async = true;
+
+	if (data->check_async && async_allowed != data->want_async)
+		return 0;
+
 	return driver_probe_device(drv, dev);
 }
 
-/**
- * device_attach - try to attach device to a driver.
- * @dev: device.
- *
- * Walk the list of drivers that the bus has and call
- * driver_probe_device() for each pair. If a compatible
- * pair is found, break out and return.
- *
- * Returns 1 if the device was bound to a driver;
- * 0 if no matching driver was found;
- * -ENODEV if the device is not registered.
- *
- * When called for a USB interface, @dev->parent lock must be held.
- */
-int device_attach(struct device *dev)
+static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
+{
+	struct device *dev = _dev;
+	struct device_attach_data data = {
+		.dev		= dev,
+		.check_async	= true,
+		.want_async	= true,
+	};
+
+	device_lock(dev);
+
+	bus_for_each_drv(dev->bus, NULL, &data, __device_attach_driver);
+	dev_dbg(dev, "async probe completed\n");
+
+	pm_request_idle(dev);
+
+	device_unlock(dev);
+
+	put_device(dev);
+}
+
+static int __device_attach(struct device *dev, bool allow_async)
 {
 	int ret = 0;
 
@@ -459,15 +535,59 @@ int device_attach(struct device *dev)
 			ret = 0;
 		}
 	} else {
-		ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
-		pm_request_idle(dev);
+		struct device_attach_data data = {
+			.dev = dev,
+			.check_async = allow_async,
+			.want_async = false,
+		};
+
+		ret = bus_for_each_drv(dev->bus, NULL, &data,
+					__device_attach_driver);
+		if (!ret && allow_async && data.have_async) {
+			/*
+			 * If we could not find appropriate driver
+			 * synchronously and we are allowed to do
+			 * async probes and there are drivers that
+			 * want to probe asynchronously, we'll
+			 * try them.
+			 */
+			dev_dbg(dev, "scheduling asynchronous probe\n");
+			get_device(dev);
+			async_schedule(__device_attach_async_helper, dev);
+		} else {
+			pm_request_idle(dev);
+		}
 	}
 out_unlock:
 	device_unlock(dev);
 	return ret;
 }
+
+/**
+ * device_attach - try to attach device to a driver.
+ * @dev: device.
+ *
+ * Walk the list of drivers that the bus has and call
+ * driver_probe_device() for each pair. If a compatible
+ * pair is found, break out and return.
+ *
+ * Returns 1 if the device was bound to a driver;
+ * 0 if no matching driver was found;
+ * -ENODEV if the device is not registered.
+ *
+ * When called for a USB interface, @dev->parent lock must be held.
+ */
+int device_attach(struct device *dev)
+{
+	return __device_attach(dev, false);
+}
 EXPORT_SYMBOL_GPL(device_attach);
 
+void device_initial_probe(struct device *dev)
+{
+	__device_attach(dev, true);
+}
+
 static int __driver_attach(struct device *dev, void *data)
 {
 	struct device_driver *drv = data;
@@ -522,6 +642,9 @@ static void __device_release_driver(struct device *dev)
 
 	drv = dev->driver;
 	if (drv) {
+		if (driver_allows_async_probing(drv))
+			async_synchronize_full();
+
 		pm_runtime_get_sync(dev);
 
 		driver_sysfs_remove(dev);