Initial import

1 files changed, 269 insertions, 0 deletions

diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
new file mode 100644
index 000000000..d9be6b4d4
--- /dev/null
+++ b/drivers/block/cciss_cmd.h
@@ -0,0 +1,269 @@
+#ifndef CCISS_CMD_H
+#define CCISS_CMD_H
+
+#include <linux/cciss_defs.h>
+
+/* DEFINES */
+#define CISS_VERSION "1.00"
+
+/* general boundary definitions */
+#define MAXSGENTRIES            32
+#define CCISS_SG_CHAIN          0x80000000
+#define MAXREPLYQS              256
+
+/* Unit Attentions ASC's as defined for the MSA2012sa */
+#define POWER_OR_RESET			0x29
+#define STATE_CHANGED			0x2a
+#define UNIT_ATTENTION_CLEARED		0x2f
+#define LUN_FAILED			0x3e
+#define REPORT_LUNS_CHANGED		0x3f
+
+/* Unit Attentions ASCQ's as defined for the MSA2012sa */
+
+	/* These ASCQ's defined for ASC = POWER_OR_RESET */
+#define POWER_ON_RESET			0x00
+#define POWER_ON_REBOOT			0x01
+#define SCSI_BUS_RESET			0x02
+#define MSA_TARGET_RESET		0x03
+#define CONTROLLER_FAILOVER		0x04
+#define TRANSCEIVER_SE			0x05
+#define TRANSCEIVER_LVD			0x06
+
+	/* These ASCQ's defined for ASC = STATE_CHANGED */
+#define RESERVATION_PREEMPTED		0x03
+#define ASYM_ACCESS_CHANGED		0x06
+#define LUN_CAPACITY_CHANGED		0x09
+
+/* config space register offsets */
+#define CFG_VENDORID            0x00
+#define CFG_DEVICEID            0x02
+#define CFG_I2OBAR              0x10
+#define CFG_MEM1BAR             0x14
+
+/* i2o space register offsets */
+#define I2O_IBDB_SET            0x20
+#define I2O_IBDB_CLEAR          0x70
+#define I2O_INT_STATUS          0x30
+#define I2O_INT_MASK            0x34
+#define I2O_IBPOST_Q            0x40
+#define I2O_OBPOST_Q            0x44
+#define I2O_DMA1_CFG		0x214
+
+/* Configuration Table */
+#define CFGTBL_ChangeReq        0x00000001l
+#define CFGTBL_AccCmds          0x00000001l
+#define DOORBELL_CTLR_RESET     0x00000004l
+#define DOORBELL_CTLR_RESET2    0x00000020l
+
+#define CFGTBL_Trans_Simple     0x00000002l
+#define CFGTBL_Trans_Performant 0x00000004l
+#define CFGTBL_Trans_use_short_tags 0x20000000l
+
+#define CFGTBL_BusType_Ultra2   0x00000001l
+#define CFGTBL_BusType_Ultra3   0x00000002l
+#define CFGTBL_BusType_Fibre1G  0x00000100l
+#define CFGTBL_BusType_Fibre2G  0x00000200l
+typedef struct _vals32
+{
+        __u32   lower;
+        __u32   upper;
+} vals32;
+
+typedef union _u64bit
+{
+   vals32	val32;
+   __u64	val;
+} u64bit;
+
+/* Type defs used in the following structs */
+#define QWORD vals32 
+
+/* STRUCTURES */
+#define CISS_MAX_PHYS_LUN	1024
+/* SCSI-3 Cmmands */
+
+#pragma pack(1)	
+
+#define CISS_INQUIRY 0x12
+/* Date returned */
+typedef struct _InquiryData_struct
+{
+  BYTE data_byte[36];
+} InquiryData_struct;
+
+#define CISS_REPORT_LOG 0xc2    /* Report Logical LUNs */
+#define CISS_REPORT_PHYS 0xc3   /* Report Physical LUNs */
+/* Data returned */
+typedef struct _ReportLUNdata_struct
+{
+  BYTE LUNListLength[4];
+  DWORD reserved;
+  BYTE LUN[CISS_MAX_LUN][8];
+} ReportLunData_struct;
+
+#define CCISS_READ_CAPACITY 0x25 /* Read Capacity */ 
+typedef struct _ReadCapdata_struct
+{
+  BYTE total_size[4];	/* Total size in blocks */
+  BYTE block_size[4];	/* Size of blocks in bytes */
+} ReadCapdata_struct;
+
+#define CCISS_READ_CAPACITY_16 0x9e /* Read Capacity 16 */
+
+/* service action to differentiate a 16 byte read capacity from
+   other commands that use the 0x9e SCSI op code */
+
+#define CCISS_READ_CAPACITY_16_SERVICE_ACT 0x10
+
+typedef struct _ReadCapdata_struct_16
+{
+	BYTE total_size[8];   /* Total size in blocks */
+	BYTE block_size[4];   /* Size of blocks in bytes */
+	BYTE prot_en:1;       /* protection enable bit */
+	BYTE rto_en:1;        /* reference tag own enable bit */
+	BYTE reserved:6;      /* reserved bits */
+	BYTE reserved2[18];   /* reserved bytes per spec */
+} ReadCapdata_struct_16;
+
+/* Define the supported read/write commands for cciss based controllers */
+
+#define CCISS_READ_10   0x28    /* Read(10)  */
+#define CCISS_WRITE_10  0x2a    /* Write(10) */
+#define CCISS_READ_16   0x88    /* Read(16)  */
+#define CCISS_WRITE_16  0x8a    /* Write(16) */
+
+/* Define the CDB lengths supported by cciss based controllers */
+
+#define CDB_LEN10	10
+#define CDB_LEN16	16
+
+/* BMIC commands */
+#define BMIC_READ 0x26
+#define BMIC_WRITE 0x27
+#define BMIC_CACHE_FLUSH 0xc2
+#define CCISS_CACHE_FLUSH 0x01	/* C2 was already being used by CCISS */
+
+#define CCISS_ABORT_MSG 0x00
+#define CCISS_RESET_MSG 0x01
+#define CCISS_RESET_TYPE_CONTROLLER 0x00
+#define CCISS_RESET_TYPE_BUS 0x01
+#define CCISS_RESET_TYPE_TARGET 0x03
+#define CCISS_RESET_TYPE_LUN 0x04
+#define CCISS_NOOP_MSG 0x03
+
+/* Command List Structure */
+#define CTLR_LUNID "\0\0\0\0\0\0\0\0"
+
+typedef struct _CommandListHeader_struct {
+  BYTE              ReplyQueue;
+  BYTE              SGList;
+  HWORD             SGTotal;
+  QWORD             Tag;
+  LUNAddr_struct    LUN;
+} CommandListHeader_struct;
+typedef struct _ErrDescriptor_struct {
+  QWORD  Addr;
+  DWORD  Len;
+} ErrDescriptor_struct;
+typedef struct _SGDescriptor_struct {
+  QWORD  Addr;
+  DWORD  Len;
+  DWORD  Ext;
+} SGDescriptor_struct;
+
+/* Command types */
+#define CMD_RWREQ       0x00
+#define CMD_IOCTL_PEND  0x01
+#define CMD_SCSI	0x03
+#define CMD_MSG_DONE	0x04
+#define CMD_MSG_TIMEOUT 0x05
+#define CMD_MSG_STALE	0xff
+
+/* This structure needs to be divisible by COMMANDLIST_ALIGNMENT
+ * because low bits of the address are used to to indicate that
+ * whether the tag contains an index or an address.  PAD_32 and
+ * PAD_64 can be adjusted independently as needed for 32-bit
+ * and 64-bits systems.
+ */
+#define COMMANDLIST_ALIGNMENT (32)
+#define IS_64_BIT ((sizeof(long) - 4)/4)
+#define IS_32_BIT (!IS_64_BIT)
+#define PAD_32 (0)
+#define PAD_64 (4)
+#define PADSIZE (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
+#define DIRECT_LOOKUP_BIT 0x10
+#define DIRECT_LOOKUP_SHIFT 5
+
+typedef struct _CommandList_struct {
+  CommandListHeader_struct Header;
+  RequestBlock_struct      Request;
+  ErrDescriptor_struct     ErrDesc;
+  SGDescriptor_struct      SG[MAXSGENTRIES];
+	/* information associated with the command */ 
+  __u32			   busaddr; /* physical address of this record */
+  ErrorInfo_struct * 	   err_info; /* pointer to the allocated mem */ 
+  int			   ctlr;
+  int			   cmd_type; 
+  long			   cmdindex;
+  struct list_head list;
+  struct request *	   rq;
+  struct completion *waiting;
+  int	 retry_count;
+  void * scsi_cmd;
+  char pad[PADSIZE];
+} CommandList_struct;
+
+/* Configuration Table Structure */
+typedef struct _HostWrite_struct {
+  DWORD TransportRequest;
+  DWORD Reserved;
+  DWORD CoalIntDelay;
+  DWORD CoalIntCount;
+} HostWrite_struct;
+
+typedef struct _CfgTable_struct {
+  BYTE             Signature[4];
+  DWORD            SpecValence;
+#define SIMPLE_MODE	0x02
+#define PERFORMANT_MODE	0x04
+#define MEMQ_MODE	0x08
+  DWORD            TransportSupport;
+  DWORD            TransportActive;
+  HostWrite_struct HostWrite;
+  DWORD            CmdsOutMax;
+  DWORD            BusTypes;
+  DWORD            TransMethodOffset;
+  BYTE             ServerName[16];
+  DWORD            HeartBeat;
+  DWORD            SCSI_Prefetch;
+  DWORD            MaxSGElements;
+  DWORD            MaxLogicalUnits;
+  DWORD            MaxPhysicalDrives;
+  DWORD            MaxPhysicalDrivesPerLogicalUnit;
+  DWORD            MaxPerformantModeCommands;
+  u8		   reserved[0x78 - 0x58];
+  u32		   misc_fw_support; /* offset 0x78 */
+#define MISC_FW_DOORBELL_RESET (0x02)
+#define MISC_FW_DOORBELL_RESET2 (0x10)
+	u8	   driver_version[32];
+} CfgTable_struct;
+
+struct TransTable_struct {
+  u32 BlockFetch0;
+  u32 BlockFetch1;
+  u32 BlockFetch2;
+  u32 BlockFetch3;
+  u32 BlockFetch4;
+  u32 BlockFetch5;
+  u32 BlockFetch6;
+  u32 BlockFetch7;
+  u32 RepQSize;
+  u32 RepQCount;
+  u32 RepQCtrAddrLow32;
+  u32 RepQCtrAddrHigh32;
+  u32 RepQAddr0Low32;
+  u32 RepQAddr0High32;
+};
+
+#pragma pack()	 
+#endif /* CCISS_CMD_H */