summaryrefslogtreecommitdiff
path: root/drivers/bluetooth/hci_intel.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-12-15 14:52:16 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-12-15 14:52:16 -0300
commit8d91c1e411f55d7ea91b1183a2e9f8088fb4d5be (patch)
treee9891aa6c295060d065adffd610c4f49ecf884f3 /drivers/bluetooth/hci_intel.c
parenta71852147516bc1cb5b0b3cbd13639bfd4022dc8 (diff)
Linux-libre 4.3.2-gnu
Diffstat (limited to 'drivers/bluetooth/hci_intel.c')
-rw-r--r--drivers/bluetooth/hci_intel.c856
1 files changed, 856 insertions, 0 deletions
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index 5dd07bf05..3a4e7c63f 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -24,8 +24,864 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/tty.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "hci_uart.h"
+#include "btintel.h"
+
+#define STATE_BOOTLOADER 0
+#define STATE_DOWNLOADING 1
+#define STATE_FIRMWARE_LOADED 2
+#define STATE_FIRMWARE_FAILED 3
+#define STATE_BOOTING 4
+
+struct intel_device {
+ struct list_head list;
+ struct platform_device *pdev;
+ struct gpio_desc *reset;
+};
+
+static LIST_HEAD(intel_device_list);
+static DEFINE_SPINLOCK(intel_device_list_lock);
+
+struct intel_data {
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+ unsigned long flags;
+};
+
+static u8 intel_convert_speed(unsigned int speed)
+{
+ switch (speed) {
+ case 9600:
+ return 0x00;
+ case 19200:
+ return 0x01;
+ case 38400:
+ return 0x02;
+ case 57600:
+ return 0x03;
+ case 115200:
+ return 0x04;
+ case 230400:
+ return 0x05;
+ case 460800:
+ return 0x06;
+ case 921600:
+ return 0x07;
+ case 1843200:
+ return 0x08;
+ case 3250000:
+ return 0x09;
+ case 2000000:
+ return 0x0a;
+ case 3000000:
+ return 0x0b;
+ default:
+ return 0xff;
+ }
+}
+
+static int intel_wait_booting(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+ int err;
+
+ err = wait_on_bit_timeout(&intel->flags, STATE_BOOTING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(1000));
+
+ if (err == 1) {
+ BT_ERR("%s: Device boot interrupted", hu->hdev->name);
+ return -EINTR;
+ }
+
+ if (err) {
+ BT_ERR("%s: Device boot timeout", hu->hdev->name);
+ return -ETIMEDOUT;
+ }
+
+ return err;
+}
+
+static int intel_set_power(struct hci_uart *hu, bool powered)
+{
+ struct list_head *p;
+ int err = -ENODEV;
+
+ spin_lock(&intel_device_list_lock);
+
+ list_for_each(p, &intel_device_list) {
+ struct intel_device *idev = list_entry(p, struct intel_device,
+ list);
+
+ /* tty device and pdev device should share the same parent
+ * which is the UART port.
+ */
+ if (hu->tty->dev->parent != idev->pdev->dev.parent)
+ continue;
+
+ if (!idev->reset) {
+ err = -ENOTSUPP;
+ break;
+ }
+
+ BT_INFO("hu %p, Switching compatible pm device (%s) to %u",
+ hu, dev_name(&idev->pdev->dev), powered);
+
+ gpiod_set_value(idev->reset, powered);
+ }
+
+ spin_unlock(&intel_device_list_lock);
+
+ return err;
+}
+
+static int intel_open(struct hci_uart *hu)
+{
+ struct intel_data *intel;
+
+ BT_DBG("hu %p", hu);
+
+ intel = kzalloc(sizeof(*intel), GFP_KERNEL);
+ if (!intel)
+ return -ENOMEM;
+
+ skb_queue_head_init(&intel->txq);
+
+ hu->priv = intel;
+
+ if (!intel_set_power(hu, true))
+ set_bit(STATE_BOOTING, &intel->flags);
+
+ return 0;
+}
+
+static int intel_close(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+
+ BT_DBG("hu %p", hu);
+
+ intel_set_power(hu, false);
+
+ skb_queue_purge(&intel->txq);
+ kfree_skb(intel->rx_skb);
+ kfree(intel);
+
+ hu->priv = NULL;
+ return 0;
+}
+
+static int intel_flush(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+
+ BT_DBG("hu %p", hu);
+
+ skb_queue_purge(&intel->txq);
+
+ return 0;
+}
+
+static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
+{
+ struct sk_buff *skb;
+ struct hci_event_hdr *hdr;
+ struct hci_ev_cmd_complete *evt;
+
+ skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
+ if (!skb)
+ return -ENOMEM;
+
+ hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
+ hdr->evt = HCI_EV_CMD_COMPLETE;
+ hdr->plen = sizeof(*evt) + 1;
+
+ evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
+ evt->ncmd = 0x01;
+ evt->opcode = cpu_to_le16(opcode);
+
+ *skb_put(skb, 1) = 0x00;
+
+ bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
+
+ return hci_recv_frame(hdev, skb);
+}
+
+static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+ struct intel_data *intel = hu->priv;
+ struct hci_dev *hdev = hu->hdev;
+ u8 speed_cmd[] = { 0x06, 0xfc, 0x01, 0x00 };
+ struct sk_buff *skb;
+ int err;
+
+ /* This can be the first command sent to the chip, check
+ * that the controller is ready.
+ */
+ err = intel_wait_booting(hu);
+
+ clear_bit(STATE_BOOTING, &intel->flags);
+
+ /* In case of timeout, try to continue anyway */
+ if (err && err != ETIMEDOUT)
+ return err;
+
+ BT_INFO("%s: Change controller speed to %d", hdev->name, speed);
+
+ speed_cmd[3] = intel_convert_speed(speed);
+ if (speed_cmd[3] == 0xff) {
+ BT_ERR("%s: Unsupported speed", hdev->name);
+ return -EINVAL;
+ }
+
+ /* Device will not accept speed change if Intel version has not been
+ * previously requested.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Reading Intel version information failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ skb = bt_skb_alloc(sizeof(speed_cmd), GFP_KERNEL);
+ if (!skb) {
+ BT_ERR("%s: Failed to allocate memory for baudrate packet",
+ hdev->name);
+ return -ENOMEM;
+ }
+
+ memcpy(skb_put(skb, sizeof(speed_cmd)), speed_cmd, sizeof(speed_cmd));
+ bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
+
+ hci_uart_set_flow_control(hu, true);
+
+ skb_queue_tail(&intel->txq, skb);
+ hci_uart_tx_wakeup(hu);
+
+ /* wait 100ms to change baudrate on controller side */
+ msleep(100);
+
+ hci_uart_set_baudrate(hu, speed);
+ hci_uart_set_flow_control(hu, false);
+
+ return 0;
+}
+
+static int intel_setup(struct hci_uart *hu)
+{
+ static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
+ 0x00, 0x08, 0x04, 0x00 };
+ struct intel_data *intel = hu->priv;
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+ struct intel_version *ver;
+ struct intel_boot_params *params;
+ const struct firmware *fw;
+ const u8 *fw_ptr;
+ char fwname[64];
+ u32 frag_len;
+ ktime_t calltime, delta, rettime;
+ unsigned long long duration;
+ unsigned int init_speed, oper_speed;
+ int speed_change = 0;
+ int err;
+
+ BT_DBG("%s", hdev->name);
+
+ hu->hdev->set_bdaddr = btintel_set_bdaddr;
+
+ calltime = ktime_get();
+
+ if (hu->init_speed)
+ init_speed = hu->init_speed;
+ else
+ init_speed = hu->proto->init_speed;
+
+ if (hu->oper_speed)
+ oper_speed = hu->oper_speed;
+ else
+ oper_speed = hu->proto->oper_speed;
+
+ if (oper_speed && init_speed && oper_speed != init_speed)
+ speed_change = 1;
+
+ /* Check that the controller is ready */
+ err = intel_wait_booting(hu);
+
+ clear_bit(STATE_BOOTING, &intel->flags);
+
+ /* In case of timeout, try to continue anyway */
+ if (err && err != ETIMEDOUT)
+ return err;
+
+ set_bit(STATE_BOOTLOADER, &intel->flags);
+
+ /* Read the Intel version information to determine if the device
+ * is in bootloader mode or if it already has operational firmware
+ * loaded.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Reading Intel version information failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*ver)) {
+ BT_ERR("%s: Intel version event size mismatch", hdev->name);
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ ver = (struct intel_version *)skb->data;
+ if (ver->status) {
+ BT_ERR("%s: Intel version command failure (%02x)",
+ hdev->name, ver->status);
+ err = -bt_to_errno(ver->status);
+ kfree_skb(skb);
+ return err;
+ }
+
+ /* The hardware platform number has a fixed value of 0x37 and
+ * for now only accept this single value.
+ */
+ if (ver->hw_platform != 0x37) {
+ BT_ERR("%s: Unsupported Intel hardware platform (%u)",
+ hdev->name, ver->hw_platform);
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
+ * supported by this firmware loading method. This check has been
+ * put in place to ensure correct forward compatibility options
+ * when newer hardware variants come along.
+ */
+ if (ver->hw_variant != 0x0b) {
+ BT_ERR("%s: Unsupported Intel hardware variant (%u)",
+ hdev->name, ver->hw_variant);
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ btintel_version_info(hdev, ver);
+
+ /* The firmware variant determines if the device is in bootloader
+ * mode or is running operational firmware. The value 0x06 identifies
+ * the bootloader and the value 0x23 identifies the operational
+ * firmware.
+ *
+ * When the operational firmware is already present, then only
+ * the check for valid Bluetooth device address is needed. This
+ * determines if the device will be added as configured or
+ * unconfigured controller.
+ *
+ * It is not possible to use the Secure Boot Parameters in this
+ * case since that command is only available in bootloader mode.
+ */
+ if (ver->fw_variant == 0x23) {
+ kfree_skb(skb);
+ clear_bit(STATE_BOOTLOADER, &intel->flags);
+ btintel_check_bdaddr(hdev);
+ return 0;
+ }
+
+ /* If the device is not in bootloader mode, then the only possible
+ * choice is to return an error and abort the device initialization.
+ */
+ if (ver->fw_variant != 0x06) {
+ BT_ERR("%s: Unsupported Intel firmware variant (%u)",
+ hdev->name, ver->fw_variant);
+ kfree_skb(skb);
+ return -ENODEV;
+ }
+
+ kfree_skb(skb);
+
+ /* Read the secure boot parameters to identify the operating
+ * details of the bootloader.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*params)) {
+ BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ params = (struct intel_boot_params *)skb->data;
+ if (params->status) {
+ BT_ERR("%s: Intel boot parameters command failure (%02x)",
+ hdev->name, params->status);
+ err = -bt_to_errno(params->status);
+ kfree_skb(skb);
+ return err;
+ }
+
+ BT_INFO("%s: Device revision is %u", hdev->name,
+ le16_to_cpu(params->dev_revid));
+
+ BT_INFO("%s: Secure boot is %s", hdev->name,
+ params->secure_boot ? "enabled" : "disabled");
+
+ BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name,
+ params->min_fw_build_nn, params->min_fw_build_cw,
+ 2000 + params->min_fw_build_yy);
+
+ /* It is required that every single firmware fragment is acknowledged
+ * with a command complete event. If the boot parameters indicate
+ * that this bootloader does not send them, then abort the setup.
+ */
+ if (params->limited_cce != 0x00) {
+ BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
+ hdev->name, params->limited_cce);
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ /* If the OTP has no valid Bluetooth device address, then there will
+ * also be no valid address for the operational firmware.
+ */
+ if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
+ BT_INFO("%s: No device address configured", hdev->name);
+ set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+ }
+
+ /* With this Intel bootloader only the hardware variant and device
+ * revision information are used to select the right firmware.
+ *
+ * Currently this bootloader support is limited to hardware variant
+ * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
+ */
+ snprintf(fwname, sizeof(fwname), "/*(DEBLOBBED)*/",
+ le16_to_cpu(params->dev_revid));
+
+ err = reject_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ BT_ERR("%s: Failed to load Intel firmware file (%d)",
+ hdev->name, err);
+ kfree_skb(skb);
+ return err;
+ }
+
+ BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
+
+ kfree_skb(skb);
+
+ if (fw->size < 644) {
+ BT_ERR("%s: Invalid size of firmware file (%zu)",
+ hdev->name, fw->size);
+ err = -EBADF;
+ goto done;
+ }
+
+ set_bit(STATE_DOWNLOADING, &intel->flags);
+
+ /* Start the firmware download transaction with the Init fragment
+ * represented by the 128 bytes of CSS header.
+ */
+ err = btintel_secure_send(hdev, 0x00, 128, fw->data);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware header (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ /* Send the 256 bytes of public key information from the firmware
+ * as the PKey fragment.
+ */
+ err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware public key (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ /* Send the 256 bytes of signature information from the firmware
+ * as the Sign fragment.
+ */
+ err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware signature (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ fw_ptr = fw->data + 644;
+ frag_len = 0;
+
+ while (fw_ptr - fw->data < fw->size) {
+ struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
+
+ frag_len += sizeof(*cmd) + cmd->plen;
+
+ BT_DBG("%s: patching %td/%zu", hdev->name,
+ (fw_ptr - fw->data), fw->size);
+
+ /* The parameter length of the secure send command requires
+ * a 4 byte alignment. It happens so that the firmware file
+ * contains proper Intel_NOP commands to align the fragments
+ * as needed.
+ *
+ * Send set of commands with 4 byte alignment from the
+ * firmware data buffer as a single Data fragement.
+ */
+ if (frag_len % 4)
+ continue;
+
+ /* Send each command from the firmware data buffer as
+ * a single Data fragment.
+ */
+ err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware data (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ fw_ptr += frag_len;
+ frag_len = 0;
+ }
+
+ set_bit(STATE_FIRMWARE_LOADED, &intel->flags);
+
+ BT_INFO("%s: Waiting for firmware download to complete", hdev->name);
+
+ /* Before switching the device into operational mode and with that
+ * booting the loaded firmware, wait for the bootloader notification
+ * that all fragments have been successfully received.
+ *
+ * When the event processing receives the notification, then the
+ * STATE_DOWNLOADING flag will be cleared.
+ *
+ * The firmware loading should not take longer than 5 seconds
+ * and thus just timeout if that happens and fail the setup
+ * of this device.
+ */
+ err = wait_on_bit_timeout(&intel->flags, STATE_DOWNLOADING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(5000));
+ if (err == 1) {
+ BT_ERR("%s: Firmware loading interrupted", hdev->name);
+ err = -EINTR;
+ goto done;
+ }
+
+ if (err) {
+ BT_ERR("%s: Firmware loading timeout", hdev->name);
+ err = -ETIMEDOUT;
+ goto done;
+ }
+
+ if (test_bit(STATE_FIRMWARE_FAILED, &intel->flags)) {
+ BT_ERR("%s: Firmware loading failed", hdev->name);
+ err = -ENOEXEC;
+ goto done;
+ }
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+ BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration);
+
+done:
+ release_firmware(fw);
+
+ if (err < 0)
+ return err;
+
+ /* We need to restore the default speed before Intel reset */
+ if (speed_change) {
+ err = intel_set_baudrate(hu, init_speed);
+ if (err)
+ return err;
+ }
+
+ calltime = ktime_get();
+
+ set_bit(STATE_BOOTING, &intel->flags);
+
+ skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ kfree_skb(skb);
+
+ /* The bootloader will not indicate when the device is ready. This
+ * is done by the operational firmware sending bootup notification.
+ *
+ * Booting into operational firmware should not take longer than
+ * 1 second. However if that happens, then just fail the setup
+ * since something went wrong.
+ */
+ BT_INFO("%s: Waiting for device to boot", hdev->name);
+
+ err = intel_wait_booting(hu);
+ if (err)
+ return err;
+
+ clear_bit(STATE_BOOTING, &intel->flags);
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+ BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+ kfree_skb(skb);
+
+ if (speed_change) {
+ err = intel_set_baudrate(hu, oper_speed);
+ if (err)
+ return err;
+ }
+
+ BT_INFO("%s: Setup complete", hdev->name);
+
+ clear_bit(STATE_BOOTLOADER, &intel->flags);
+
+ return 0;
+}
+
+static int intel_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct intel_data *intel = hu->priv;
+ struct hci_event_hdr *hdr;
+
+ if (!test_bit(STATE_BOOTLOADER, &intel->flags) &&
+ !test_bit(STATE_BOOTING, &intel->flags))
+ goto recv;
+
+ hdr = (void *)skb->data;
+
+ /* When the firmware loading completes the device sends
+ * out a vendor specific event indicating the result of
+ * the firmware loading.
+ */
+ if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
+ skb->data[2] == 0x06) {
+ if (skb->data[3] != 0x00)
+ set_bit(STATE_FIRMWARE_FAILED, &intel->flags);
+
+ if (test_and_clear_bit(STATE_DOWNLOADING, &intel->flags) &&
+ test_bit(STATE_FIRMWARE_LOADED, &intel->flags)) {
+ smp_mb__after_atomic();
+ wake_up_bit(&intel->flags, STATE_DOWNLOADING);
+ }
+
+ /* When switching to the operational firmware the device
+ * sends a vendor specific event indicating that the bootup
+ * completed.
+ */
+ } else if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
+ skb->data[2] == 0x02) {
+ if (test_and_clear_bit(STATE_BOOTING, &intel->flags)) {
+ smp_mb__after_atomic();
+ wake_up_bit(&intel->flags, STATE_BOOTING);
+ }
+ }
+recv:
+ return hci_recv_frame(hdev, skb);
+}
+
+static const struct h4_recv_pkt intel_recv_pkts[] = {
+ { H4_RECV_ACL, .recv = hci_recv_frame },
+ { H4_RECV_SCO, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = intel_recv_event },
+};
+
+static int intel_recv(struct hci_uart *hu, const void *data, int count)
+{
+ struct intel_data *intel = hu->priv;
+
+ if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+ return -EUNATCH;
+
+ intel->rx_skb = h4_recv_buf(hu->hdev, intel->rx_skb, data, count,
+ intel_recv_pkts,
+ ARRAY_SIZE(intel_recv_pkts));
+ if (IS_ERR(intel->rx_skb)) {
+ int err = PTR_ERR(intel->rx_skb);
+ BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ intel->rx_skb = NULL;
+ return err;
+ }
+
+ return count;
+}
+
+static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+ struct intel_data *intel = hu->priv;
+
+ BT_DBG("hu %p skb %p", hu, skb);
+
+ skb_queue_tail(&intel->txq, skb);
+
+ return 0;
+}
+
+static struct sk_buff *intel_dequeue(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+ struct sk_buff *skb;
+
+ skb = skb_dequeue(&intel->txq);
+ if (!skb)
+ return skb;
+
+ if (test_bit(STATE_BOOTLOADER, &intel->flags) &&
+ (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT)) {
+ struct hci_command_hdr *cmd = (void *)skb->data;
+ __u16 opcode = le16_to_cpu(cmd->opcode);
+
+ /* When the 0xfc01 command is issued to boot into
+ * the operational firmware, it will actually not
+ * send a command complete event. To keep the flow
+ * control working inject that event here.
+ */
+ if (opcode == 0xfc01)
+ inject_cmd_complete(hu->hdev, opcode);
+ }
+
+ /* Prepend skb with frame type */
+ memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+
+ return skb;
+}
+
+static const struct hci_uart_proto intel_proto = {
+ .id = HCI_UART_INTEL,
+ .name = "Intel",
+ .init_speed = 115200,
+ .oper_speed = 3000000,
+ .open = intel_open,
+ .close = intel_close,
+ .flush = intel_flush,
+ .setup = intel_setup,
+ .set_baudrate = intel_set_baudrate,
+ .recv = intel_recv,
+ .enqueue = intel_enqueue,
+ .dequeue = intel_dequeue,
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id intel_acpi_match[] = {
+ { "INT33E1", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, intel_acpi_match);
+
+static int intel_acpi_probe(struct intel_device *idev)
+{
+ const struct acpi_device_id *id;
+
+ id = acpi_match_device(intel_acpi_match, &idev->pdev->dev);
+ if (!id)
+ return -ENODEV;
+
+ return 0;
+}
+#else
+static int intel_acpi_probe(struct intel_device *idev)
+{
+ return -ENODEV;
+}
+#endif
+
+static int intel_probe(struct platform_device *pdev)
+{
+ struct intel_device *idev;
+
+ idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
+ if (!idev)
+ return -ENOMEM;
+
+ idev->pdev = pdev;
+
+ if (ACPI_HANDLE(&pdev->dev)) {
+ int err = intel_acpi_probe(idev);
+ if (err)
+ return err;
+ } else {
+ return -ENODEV;
+ }
+
+ idev->reset = devm_gpiod_get_optional(&pdev->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(idev->reset)) {
+ dev_err(&pdev->dev, "Unable to retrieve gpio\n");
+ return PTR_ERR(idev->reset);
+ }
+
+ platform_set_drvdata(pdev, idev);
+
+ /* Place this instance on the device list */
+ spin_lock(&intel_device_list_lock);
+ list_add_tail(&idev->list, &intel_device_list);
+ spin_unlock(&intel_device_list_lock);
+
+ dev_info(&pdev->dev, "registered.\n");
+
+ return 0;
+}
+
+static int intel_remove(struct platform_device *pdev)
+{
+ struct intel_device *idev = platform_get_drvdata(pdev);
+
+ spin_lock(&intel_device_list_lock);
+ list_del(&idev->list);
+ spin_unlock(&intel_device_list_lock);
+
+ dev_info(&pdev->dev, "unregistered.\n");
+
+ return 0;
+}
+
+static struct platform_driver intel_driver = {
+ .probe = intel_probe,
+ .remove = intel_remove,
+ .driver = {
+ .name = "hci_intel",
+ .acpi_match_table = ACPI_PTR(intel_acpi_match),
+ },
+};
+
+int __init intel_init(void)
+{
+ platform_driver_register(&intel_driver);
+
+ return hci_uart_register_proto(&intel_proto);
+}
+
+int __exit intel_deinit(void)
+{
+ platform_driver_unregister(&intel_driver);
+
+ return hci_uart_unregister_proto(&intel_proto);
+}