Linux-libre 4.7.1-gnupck-4.7.1-gnu

4 files changed, 44 insertions, 10 deletions

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index d4a3a3133..c5a7de9bc 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -48,7 +48,7 @@ config ARM_CCI5xx_PMU
 	  If unsure, say Y
 
 config ARM_CCN
-	bool "ARM CCN driver support"
+	tristate "ARM CCN driver support"
 	depends on ARM || ARM64
 	depends on PERF_EVENTS
 	help
@@ -58,6 +58,7 @@ config ARM_CCN
 config BRCMSTB_GISB_ARB
 	bool "Broadcom STB GISB bus arbiter"
 	depends on ARM || MIPS
+	default ARCH_BRCMSTB || BMIPS_GENERIC
 	help
 	  Driver for the Broadcom Set Top Box System-on-a-chip internal bus
 	  arbiter. This driver provides timeout and target abort error handling
@@ -110,7 +111,7 @@ config OMAP_OCP2SCP
 config SIMPLE_PM_BUS
 	bool "Simple Power-Managed Bus Driver"
 	depends on OF && PM
-	depends on ARCH_SHMOBILE || COMPILE_TEST
+	depends on ARCH_RENESAS || COMPILE_TEST
 	help
 	  Driver for transparent busses that don't need a real driver, but
 	  where the bus controller is part of a PM domain, or under the control
diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 7082c7268..acc3eb542 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -1189,7 +1189,7 @@ static int arm_ccn_pmu_cpu_notifier(struct notifier_block *nb,
 		perf_pmu_migrate_context(&dt->pmu, cpu, target);
 		cpumask_set_cpu(target, &dt->cpu);
 		if (ccn->irq)
-			WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
+			WARN_ON(irq_set_affinity_hint(ccn->irq, &dt->cpu) != 0);
 	default:
 		break;
 	}
@@ -1278,7 +1278,7 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
 
 	/* Also make sure that the overflow interrupt is handled by this CPU */
 	if (ccn->irq) {
-		err = irq_set_affinity(ccn->irq, &ccn->dt.cpu);
+		err = irq_set_affinity_hint(ccn->irq, &ccn->dt.cpu);
 		if (err) {
 			dev_err(ccn->dev, "Failed to set interrupt affinity!\n");
 			goto error_set_affinity;
@@ -1306,7 +1306,8 @@ static void arm_ccn_pmu_cleanup(struct arm_ccn *ccn)
 {
 	int i;
 
-	irq_set_affinity(ccn->irq, cpu_possible_mask);
+	if (ccn->irq)
+		irq_set_affinity_hint(ccn->irq, NULL);
 	unregister_cpu_notifier(&ccn->dt.cpu_nb);
 	for (i = 0; i < ccn->num_xps; i++)
 		writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index f364fa4d2..72fe0a5a8 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -30,6 +30,10 @@
 #include <asm/signal.h>
 #endif
 
+#ifdef CONFIG_MIPS
+#include <asm/traps.h>
+#endif
+
 #define  ARB_ERR_CAP_CLEAR		(1 << 0)
 #define  ARB_ERR_CAP_STATUS_TIMEOUT	(1 << 12)
 #define  ARB_ERR_CAP_STATUS_TEA		(1 << 11)
@@ -238,6 +242,29 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
 }
 #endif
 
+#ifdef CONFIG_MIPS
+static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
+{
+	int ret = 0;
+	struct brcmstb_gisb_arb_device *gdev;
+	u32 cap_status;
+
+	list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next) {
+		cap_status = gisb_read(gdev, ARB_ERR_CAP_STATUS);
+
+		/* Invalid captured address, bail out */
+		if (!(cap_status & ARB_ERR_CAP_STATUS_VALID)) {
+			is_fixup = 1;
+			goto out;
+		}
+
+		ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error");
+	}
+out:
+	return is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
+}
+#endif
+
 static irqreturn_t brcmstb_gisb_timeout_handler(int irq, void *dev_id)
 {
 	brcmstb_gisb_arb_decode_addr(dev_id, "timeout");
@@ -355,6 +382,9 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
 	hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
 			"imprecise external abort");
 #endif
+#ifdef CONFIG_MIPS
+	board_be_handler = brcmstb_bus_error_handler;
+#endif
 
 	dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n",
 			gdev->base, timeout_irq, tea_irq);
diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c
index 1c543effe..cad49bc38 100644
--- a/drivers/bus/mips_cdmm.c
+++ b/drivers/bus/mips_cdmm.c
@@ -599,8 +599,8 @@ BUILD_PERDEV_HELPER(cpu_up)         /* int mips_cdmm_cpu_up_helper(...) */
  * mips_cdmm_bus_down() - Tear down the CDMM bus.
  * @data:	Pointer to unsigned int CPU number.
  *
- * This work_on_cpu callback function is executed on a given CPU to call the
- * CDMM driver cpu_down callback for all devices on that CPU.
+ * This function is executed on the hotplugged CPU and calls the CDMM
+ * driver cpu_down callback for all devices on that CPU.
  */
 static long mips_cdmm_bus_down(void *data)
 {
@@ -630,7 +630,9 @@ static long mips_cdmm_bus_down(void *data)
  * CDMM devices on that CPU, or to call the CDMM driver cpu_up callback for all
  * devices already discovered on that CPU.
  *
- * It is used during initialisation and when CPUs are brought online.
+ * It is used as work_on_cpu callback function during
+ * initialisation. When CPUs are brought online the function is
+ * invoked directly on the hotplugged CPU.
  */
 static long mips_cdmm_bus_up(void *data)
 {
@@ -677,10 +679,10 @@ static int mips_cdmm_cpu_notify(struct notifier_block *nb,
 	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
 	case CPU_DOWN_FAILED:
-		work_on_cpu(cpu, mips_cdmm_bus_up, &cpu);
+		mips_cdmm_bus_up(&cpu);
 		break;
 	case CPU_DOWN_PREPARE:
-		work_on_cpu(cpu, mips_cdmm_bus_down, &cpu);
+		mips_cdmm_bus_down(&cpu);
 		break;
 	default:
 		return NOTIFY_DONE;