Initial import

1 files changed, 629 insertions, 0 deletions

diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
new file mode 100644
index 000000000..6c488e635
--- /dev/null
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -0,0 +1,629 @@
+/*
+ * Description:
+ * Device Driver for the Infineon Technologies
+ * SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module
+ * Specifications at www.trustedcomputinggroup.org
+ *
+ * Copyright (C) 2005, Marcel Selhorst <tpmdd@selhorst.net>
+ * Sirrix AG - security technologies <tpmdd@sirrix.com> and
+ * Applied Data Security Group, Ruhr-University Bochum, Germany
+ * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ 
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/init.h>
+#include <linux/pnp.h>
+#include "tpm.h"
+
+/* Infineon specific definitions */
+/* maximum number of WTX-packages */
+#define	TPM_MAX_WTX_PACKAGES 	50
+/* msleep-Time for WTX-packages */
+#define	TPM_WTX_MSLEEP_TIME 	20
+/* msleep-Time --> Interval to check status register */
+#define	TPM_MSLEEP_TIME 	3
+/* gives number of max. msleep()-calls before throwing timeout */
+#define	TPM_MAX_TRIES		5000
+#define	TPM_INFINEON_DEV_VEN_VALUE	0x15D1
+
+#define TPM_INF_IO_PORT		0x0
+#define TPM_INF_IO_MEM		0x1
+
+#define TPM_INF_ADDR		0x0
+#define TPM_INF_DATA		0x1
+
+struct tpm_inf_dev {
+	int iotype;
+
+	void __iomem *mem_base;	/* MMIO ioremap'd addr */
+	unsigned long map_base;	/* phys MMIO base */
+	unsigned long map_size;	/* MMIO region size */
+	unsigned int index_off;	/* index register offset */
+
+	unsigned int data_regs;	/* Data registers */
+	unsigned int data_size;
+
+	unsigned int config_port;	/* IO Port config index reg */
+	unsigned int config_size;
+};
+
+static struct tpm_inf_dev tpm_dev;
+
+static inline void tpm_data_out(unsigned char data, unsigned char offset)
+{
+	if (tpm_dev.iotype == TPM_INF_IO_PORT)
+		outb(data, tpm_dev.data_regs + offset);
+	else
+		writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
+}
+
+static inline unsigned char tpm_data_in(unsigned char offset)
+{
+	if (tpm_dev.iotype == TPM_INF_IO_PORT)
+		return inb(tpm_dev.data_regs + offset);
+	else
+		return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
+}
+
+static inline void tpm_config_out(unsigned char data, unsigned char offset)
+{
+	if (tpm_dev.iotype == TPM_INF_IO_PORT)
+		outb(data, tpm_dev.config_port + offset);
+	else
+		writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
+}
+
+static inline unsigned char tpm_config_in(unsigned char offset)
+{
+	if (tpm_dev.iotype == TPM_INF_IO_PORT)
+		return inb(tpm_dev.config_port + offset);
+	else
+		return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
+}
+
+/* TPM header definitions */
+enum infineon_tpm_header {
+	TPM_VL_VER = 0x01,
+	TPM_VL_CHANNEL_CONTROL = 0x07,
+	TPM_VL_CHANNEL_PERSONALISATION = 0x0A,
+	TPM_VL_CHANNEL_TPM = 0x0B,
+	TPM_VL_CONTROL = 0x00,
+	TPM_INF_NAK = 0x15,
+	TPM_CTRL_WTX = 0x10,
+	TPM_CTRL_WTX_ABORT = 0x18,
+	TPM_CTRL_WTX_ABORT_ACK = 0x18,
+	TPM_CTRL_ERROR = 0x20,
+	TPM_CTRL_CHAININGACK = 0x40,
+	TPM_CTRL_CHAINING = 0x80,
+	TPM_CTRL_DATA = 0x04,
+	TPM_CTRL_DATA_CHA = 0x84,
+	TPM_CTRL_DATA_CHA_ACK = 0xC4
+};
+
+enum infineon_tpm_register {
+	WRFIFO = 0x00,
+	RDFIFO = 0x01,
+	STAT = 0x02,
+	CMD = 0x03
+};
+
+enum infineon_tpm_command_bits {
+	CMD_DIS = 0x00,
+	CMD_LP = 0x01,
+	CMD_RES = 0x02,
+	CMD_IRQC = 0x06
+};
+
+enum infineon_tpm_status_bits {
+	STAT_XFE = 0x00,
+	STAT_LPA = 0x01,
+	STAT_FOK = 0x02,
+	STAT_TOK = 0x03,
+	STAT_IRQA = 0x06,
+	STAT_RDA = 0x07
+};
+
+/* some outgoing values */
+enum infineon_tpm_values {
+	CHIP_ID1 = 0x20,
+	CHIP_ID2 = 0x21,
+	TPM_DAR = 0x30,
+	RESET_LP_IRQC_DISABLE = 0x41,
+	ENABLE_REGISTER_PAIR = 0x55,
+	IOLIMH = 0x60,
+	IOLIML = 0x61,
+	DISABLE_REGISTER_PAIR = 0xAA,
+	IDVENL = 0xF1,
+	IDVENH = 0xF2,
+	IDPDL = 0xF3,
+	IDPDH = 0xF4
+};
+
+static int number_of_wtx;
+
+static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo)
+{
+	int status;
+	int check = 0;
+	int i;
+
+	if (clear_wrfifo) {
+		for (i = 0; i < 4096; i++) {
+			status = tpm_data_in(WRFIFO);
+			if (status == 0xff) {
+				if (check == 5)
+					break;
+				else
+					check++;
+			}
+		}
+	}
+	/* Note: The values which are currently in the FIFO of the TPM
+	   are thrown away since there is no usage for them. Usually,
+	   this has nothing to say, since the TPM will give its answer
+	   immediately or will be aborted anyway, so the data here is
+	   usually garbage and useless.
+	   We have to clean this, because the next communication with
+	   the TPM would be rubbish, if there is still some old data
+	   in the Read FIFO.
+	 */
+	i = 0;
+	do {
+		status = tpm_data_in(RDFIFO);
+		status = tpm_data_in(STAT);
+		i++;
+		if (i == TPM_MAX_TRIES)
+			return -EIO;
+	} while ((status & (1 << STAT_RDA)) != 0);
+	return 0;
+}
+
+static int wait(struct tpm_chip *chip, int wait_for_bit)
+{
+	int status;
+	int i;
+	for (i = 0; i < TPM_MAX_TRIES; i++) {
+		status = tpm_data_in(STAT);
+		/* check the status-register if wait_for_bit is set */
+		if (status & 1 << wait_for_bit)
+			break;
+		msleep(TPM_MSLEEP_TIME);
+	}
+	if (i == TPM_MAX_TRIES) {	/* timeout occurs */
+		if (wait_for_bit == STAT_XFE)
+			dev_err(chip->pdev, "Timeout in wait(STAT_XFE)\n");
+		if (wait_for_bit == STAT_RDA)
+			dev_err(chip->pdev, "Timeout in wait(STAT_RDA)\n");
+		return -EIO;
+	}
+	return 0;
+};
+
+static void wait_and_send(struct tpm_chip *chip, u8 sendbyte)
+{
+	wait(chip, STAT_XFE);
+	tpm_data_out(sendbyte, WRFIFO);
+}
+
+    /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more
+       calculation time, it sends a WTX-package, which has to be acknowledged
+       or aborted. This usually occurs if you are hammering the TPM with key
+       creation. Set the maximum number of WTX-packages in the definitions
+       above, if the number is reached, the waiting-time will be denied
+       and the TPM command has to be resend.
+     */
+
+static void tpm_wtx(struct tpm_chip *chip)
+{
+	number_of_wtx++;
+	dev_info(chip->pdev, "Granting WTX (%02d / %02d)\n",
+		 number_of_wtx, TPM_MAX_WTX_PACKAGES);
+	wait_and_send(chip, TPM_VL_VER);
+	wait_and_send(chip, TPM_CTRL_WTX);
+	wait_and_send(chip, 0x00);
+	wait_and_send(chip, 0x00);
+	msleep(TPM_WTX_MSLEEP_TIME);
+}
+
+static void tpm_wtx_abort(struct tpm_chip *chip)
+{
+	dev_info(chip->pdev, "Aborting WTX\n");
+	wait_and_send(chip, TPM_VL_VER);
+	wait_and_send(chip, TPM_CTRL_WTX_ABORT);
+	wait_and_send(chip, 0x00);
+	wait_and_send(chip, 0x00);
+	number_of_wtx = 0;
+	msleep(TPM_WTX_MSLEEP_TIME);
+}
+
+static int tpm_inf_recv(struct tpm_chip *chip, u8 * buf, size_t count)
+{
+	int i;
+	int ret;
+	u32 size = 0;
+	number_of_wtx = 0;
+
+recv_begin:
+	/* start receiving header */
+	for (i = 0; i < 4; i++) {
+		ret = wait(chip, STAT_RDA);
+		if (ret)
+			return -EIO;
+		buf[i] = tpm_data_in(RDFIFO);
+	}
+
+	if (buf[0] != TPM_VL_VER) {
+		dev_err(chip->pdev,
+			"Wrong transport protocol implementation!\n");
+		return -EIO;
+	}
+
+	if (buf[1] == TPM_CTRL_DATA) {
+		/* size of the data received */
+		size = ((buf[2] << 8) | buf[3]);
+
+		for (i = 0; i < size; i++) {
+			wait(chip, STAT_RDA);
+			buf[i] = tpm_data_in(RDFIFO);
+		}
+
+		if ((size == 0x6D00) && (buf[1] == 0x80)) {
+			dev_err(chip->pdev, "Error handling on vendor layer!\n");
+			return -EIO;
+		}
+
+		for (i = 0; i < size; i++)
+			buf[i] = buf[i + 6];
+
+		size = size - 6;
+		return size;
+	}
+
+	if (buf[1] == TPM_CTRL_WTX) {
+		dev_info(chip->pdev, "WTX-package received\n");
+		if (number_of_wtx < TPM_MAX_WTX_PACKAGES) {
+			tpm_wtx(chip);
+			goto recv_begin;
+		} else {
+			tpm_wtx_abort(chip);
+			goto recv_begin;
+		}
+	}
+
+	if (buf[1] == TPM_CTRL_WTX_ABORT_ACK) {
+		dev_info(chip->pdev, "WTX-abort acknowledged\n");
+		return size;
+	}
+
+	if (buf[1] == TPM_CTRL_ERROR) {
+		dev_err(chip->pdev, "ERROR-package received:\n");
+		if (buf[4] == TPM_INF_NAK)
+			dev_err(chip->pdev,
+				"-> Negative acknowledgement"
+				" - retransmit command!\n");
+		return -EIO;
+	}
+	return -EIO;
+}
+
+static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count)
+{
+	int i;
+	int ret;
+	u8 count_high, count_low, count_4, count_3, count_2, count_1;
+
+	/* Disabling Reset, LP and IRQC */
+	tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
+
+	ret = empty_fifo(chip, 1);
+	if (ret) {
+		dev_err(chip->pdev, "Timeout while clearing FIFO\n");
+		return -EIO;
+	}
+
+	ret = wait(chip, STAT_XFE);
+	if (ret)
+		return -EIO;
+
+	count_4 = (count & 0xff000000) >> 24;
+	count_3 = (count & 0x00ff0000) >> 16;
+	count_2 = (count & 0x0000ff00) >> 8;
+	count_1 = (count & 0x000000ff);
+	count_high = ((count + 6) & 0xffffff00) >> 8;
+	count_low = ((count + 6) & 0x000000ff);
+
+	/* Sending Header */
+	wait_and_send(chip, TPM_VL_VER);
+	wait_and_send(chip, TPM_CTRL_DATA);
+	wait_and_send(chip, count_high);
+	wait_and_send(chip, count_low);
+
+	/* Sending Data Header */
+	wait_and_send(chip, TPM_VL_VER);
+	wait_and_send(chip, TPM_VL_CHANNEL_TPM);
+	wait_and_send(chip, count_4);
+	wait_and_send(chip, count_3);
+	wait_and_send(chip, count_2);
+	wait_and_send(chip, count_1);
+
+	/* Sending Data */
+	for (i = 0; i < count; i++) {
+		wait_and_send(chip, buf[i]);
+	}
+	return count;
+}
+
+static void tpm_inf_cancel(struct tpm_chip *chip)
+{
+	/*
+	   Since we are using the legacy mode to communicate
+	   with the TPM, we have no cancel functions, but have
+	   a workaround for interrupting the TPM through WTX.
+	 */
+}
+
+static u8 tpm_inf_status(struct tpm_chip *chip)
+{
+	return tpm_data_in(STAT);
+}
+
+static const struct tpm_class_ops tpm_inf = {
+	.recv = tpm_inf_recv,
+	.send = tpm_inf_send,
+	.cancel = tpm_inf_cancel,
+	.status = tpm_inf_status,
+	.req_complete_mask = 0,
+	.req_complete_val = 0,
+};
+
+static const struct pnp_device_id tpm_inf_pnp_tbl[] = {
+	/* Infineon TPMs */
+	{"IFX0101", 0},
+	{"IFX0102", 0},
+	{"", 0}
+};
+
+MODULE_DEVICE_TABLE(pnp, tpm_inf_pnp_tbl);
+
+static int tpm_inf_pnp_probe(struct pnp_dev *dev,
+				       const struct pnp_device_id *dev_id)
+{
+	int rc = 0;
+	u8 iol, ioh;
+	int vendorid[2];
+	int version[2];
+	int productid[2];
+	char chipname[20];
+	struct tpm_chip *chip;
+
+	/* read IO-ports through PnP */
+	if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
+	    !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
+
+		tpm_dev.iotype = TPM_INF_IO_PORT;
+
+		tpm_dev.config_port = pnp_port_start(dev, 0);
+		tpm_dev.config_size = pnp_port_len(dev, 0);
+		tpm_dev.data_regs = pnp_port_start(dev, 1);
+		tpm_dev.data_size = pnp_port_len(dev, 1);
+		if ((tpm_dev.data_size < 4) || (tpm_dev.config_size < 2)) {
+			rc = -EINVAL;
+			goto err_last;
+		}
+		dev_info(&dev->dev, "Found %s with ID %s\n",
+			 dev->name, dev_id->id);
+		if (!((tpm_dev.data_regs >> 8) & 0xff)) {
+			rc = -EINVAL;
+			goto err_last;
+		}
+		/* publish my base address and request region */
+		if (request_region(tpm_dev.data_regs, tpm_dev.data_size,
+				   "tpm_infineon0") == NULL) {
+			rc = -EINVAL;
+			goto err_last;
+		}
+		if (request_region(tpm_dev.config_port, tpm_dev.config_size,
+				   "tpm_infineon0") == NULL) {
+			release_region(tpm_dev.data_regs, tpm_dev.data_size);
+			rc = -EINVAL;
+			goto err_last;
+		}
+	} else if (pnp_mem_valid(dev, 0) &&
+		   !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) {
+
+		tpm_dev.iotype = TPM_INF_IO_MEM;
+
+		tpm_dev.map_base = pnp_mem_start(dev, 0);
+		tpm_dev.map_size = pnp_mem_len(dev, 0);
+
+		dev_info(&dev->dev, "Found %s with ID %s\n",
+			 dev->name, dev_id->id);
+
+		/* publish my base address and request region */
+		if (request_mem_region(tpm_dev.map_base, tpm_dev.map_size,
+				       "tpm_infineon0") == NULL) {
+			rc = -EINVAL;
+			goto err_last;
+		}
+
+		tpm_dev.mem_base = ioremap(tpm_dev.map_base, tpm_dev.map_size);
+		if (tpm_dev.mem_base == NULL) {
+			release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
+			rc = -EINVAL;
+			goto err_last;
+		}
+
+		/*
+		 * The only known MMIO based Infineon TPM system provides
+		 * a single large mem region with the device config
+		 * registers at the default TPM_ADDR.  The data registers
+		 * seem like they could be placed anywhere within the MMIO
+		 * region, but lets just put them at zero offset.
+		 */
+		tpm_dev.index_off = TPM_ADDR;
+		tpm_dev.data_regs = 0x0;
+	} else {
+		rc = -EINVAL;
+		goto err_last;
+	}
+
+	/* query chip for its vendor, its version number a.s.o. */
+	tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
+	tpm_config_out(IDVENL, TPM_INF_ADDR);
+	vendorid[1] = tpm_config_in(TPM_INF_DATA);
+	tpm_config_out(IDVENH, TPM_INF_ADDR);
+	vendorid[0] = tpm_config_in(TPM_INF_DATA);
+	tpm_config_out(IDPDL, TPM_INF_ADDR);
+	productid[1] = tpm_config_in(TPM_INF_DATA);
+	tpm_config_out(IDPDH, TPM_INF_ADDR);
+	productid[0] = tpm_config_in(TPM_INF_DATA);
+	tpm_config_out(CHIP_ID1, TPM_INF_ADDR);
+	version[1] = tpm_config_in(TPM_INF_DATA);
+	tpm_config_out(CHIP_ID2, TPM_INF_ADDR);
+	version[0] = tpm_config_in(TPM_INF_DATA);
+
+	switch ((productid[0] << 8) | productid[1]) {
+	case 6:
+		snprintf(chipname, sizeof(chipname), " (SLD 9630 TT 1.1)");
+		break;
+	case 11:
+		snprintf(chipname, sizeof(chipname), " (SLB 9635 TT 1.2)");
+		break;
+	default:
+		snprintf(chipname, sizeof(chipname), " (unknown chip)");
+		break;
+	}
+
+	if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) {
+
+		/* configure TPM with IO-ports */
+		tpm_config_out(IOLIMH, TPM_INF_ADDR);
+		tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA);
+		tpm_config_out(IOLIML, TPM_INF_ADDR);
+		tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA);
+
+		/* control if IO-ports are set correctly */
+		tpm_config_out(IOLIMH, TPM_INF_ADDR);
+		ioh = tpm_config_in(TPM_INF_DATA);
+		tpm_config_out(IOLIML, TPM_INF_ADDR);
+		iol = tpm_config_in(TPM_INF_DATA);
+
+		if ((ioh << 8 | iol) != tpm_dev.data_regs) {
+			dev_err(&dev->dev,
+				"Could not set IO-data registers to 0x%x\n",
+				tpm_dev.data_regs);
+			rc = -EIO;
+			goto err_release_region;
+		}
+
+		/* activate register */
+		tpm_config_out(TPM_DAR, TPM_INF_ADDR);
+		tpm_config_out(0x01, TPM_INF_DATA);
+		tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
+
+		/* disable RESET, LP and IRQC */
+		tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
+
+		/* Finally, we're done, print some infos */
+		dev_info(&dev->dev, "TPM found: "
+			 "config base 0x%lx, "
+			 "data base 0x%lx, "
+			 "chip version 0x%02x%02x, "
+			 "vendor id 0x%x%x (Infineon), "
+			 "product id 0x%02x%02x"
+			 "%s\n",
+			 tpm_dev.iotype == TPM_INF_IO_PORT ?
+			 tpm_dev.config_port :
+			 tpm_dev.map_base + tpm_dev.index_off,
+			 tpm_dev.iotype == TPM_INF_IO_PORT ?
+			 tpm_dev.data_regs :
+			 tpm_dev.map_base + tpm_dev.data_regs,
+			 version[0], version[1],
+			 vendorid[0], vendorid[1],
+			 productid[0], productid[1], chipname);
+
+		chip = tpmm_chip_alloc(&dev->dev, &tpm_inf);
+		if (IS_ERR(chip)) {
+			rc = PTR_ERR(chip);
+			goto err_release_region;
+		}
+
+		rc = tpm_chip_register(chip);
+		if (rc)
+			goto err_release_region;
+
+		return 0;
+	} else {
+		rc = -ENODEV;
+		goto err_release_region;
+	}
+
+err_release_region:
+	if (tpm_dev.iotype == TPM_INF_IO_PORT) {
+		release_region(tpm_dev.data_regs, tpm_dev.data_size);
+		release_region(tpm_dev.config_port, tpm_dev.config_size);
+	} else {
+		iounmap(tpm_dev.mem_base);
+		release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
+	}
+
+err_last:
+	return rc;
+}
+
+static void tpm_inf_pnp_remove(struct pnp_dev *dev)
+{
+	struct tpm_chip *chip = pnp_get_drvdata(dev);
+
+	tpm_chip_unregister(chip);
+
+	if (tpm_dev.iotype == TPM_INF_IO_PORT) {
+		release_region(tpm_dev.data_regs, tpm_dev.data_size);
+		release_region(tpm_dev.config_port,
+			       tpm_dev.config_size);
+	} else {
+		iounmap(tpm_dev.mem_base);
+		release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
+	}
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tpm_inf_resume(struct device *dev)
+{
+	/* Re-configure TPM after suspending */
+	tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
+	tpm_config_out(IOLIMH, TPM_INF_ADDR);
+	tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA);
+	tpm_config_out(IOLIML, TPM_INF_ADDR);
+	tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA);
+	/* activate register */
+	tpm_config_out(TPM_DAR, TPM_INF_ADDR);
+	tpm_config_out(0x01, TPM_INF_DATA);
+	tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
+	/* disable RESET, LP and IRQC */
+	tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
+	return tpm_pm_resume(dev);
+}
+#endif
+static SIMPLE_DEV_PM_OPS(tpm_inf_pm, tpm_pm_suspend, tpm_inf_resume);
+
+static struct pnp_driver tpm_inf_pnp_driver = {
+	.name = "tpm_inf_pnp",
+	.id_table = tpm_inf_pnp_tbl,
+	.probe = tpm_inf_pnp_probe,
+	.remove = tpm_inf_pnp_remove,
+	.driver = {
+		.pm = &tpm_inf_pm,
+	}
+};
+
+module_pnp_driver(tpm_inf_pnp_driver);
+
+MODULE_AUTHOR("Marcel Selhorst <tpmdd@sirrix.com>");
+MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
+MODULE_VERSION("1.9.2");
+MODULE_LICENSE("GPL");