Linux-libre 4.2-gnu

10 files changed, 1720 insertions, 7 deletions

diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index 75506e530..88febf53b 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -7,3 +7,12 @@ config CLK_BCM_KONA
 	  Enable common clock framework support for Broadcom SoCs
 	  using "Kona" style clock control units, including those
 	  in the BCM281xx and BCM21664 families.
+
+config COMMON_CLK_IPROC
+	bool "Broadcom iProc clock support"
+	depends on ARCH_BCM_IPROC
+	depends on COMMON_CLK
+	default ARCH_BCM_IPROC
+	help
+	  Enable common clock framework support for Broadcom SoCs
+	  based on the iProc architecture
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 6297d05a9..8a7a47786 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -2,3 +2,5 @@ obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
+obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_ARCH_BCM_CYGNUS)	+= clk-cygnus.o
diff --git a/drivers/clk/bcm/clk-cygnus.c b/drivers/clk/bcm/clk-cygnus.c
new file mode 100644
index 000000000..316c60337
--- /dev/null
+++ b/drivers/clk/bcm/clk-cygnus.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+
+#include <dt-bindings/clock/bcm-cygnus.h>
+#include "clk-iproc.h"
+
+#define reg_val(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define aon_val(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+	.pwr_shift = ps, .iso_shift = is }
+
+#define sw_ctrl_val(o, s) { .offset = o, .shift = s, }
+
+#define asiu_div_val(o, es, hs, hw, ls, lw) \
+		{ .offset = o, .en_shift = es, .high_shift = hs, \
+		.high_width = hw, .low_shift = ls, .low_width = lw }
+
+#define reset_val(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
+	.reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
+	.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
+	.ka_width = kaw }
+
+#define vco_ctrl_val(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define enable_val(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+	.hold_shift = hs, .bypass_shift = bs }
+
+#define asiu_gate_val(o, es) { .offset = o, .en_shift = es }
+
+static void __init cygnus_armpll_init(struct device_node *node)
+{
+	iproc_armpll_setup(node);
+}
+CLK_OF_DECLARE(cygnus_armpll, "brcm,cygnus-armpll", cygnus_armpll_init);
+
+static const struct iproc_pll_ctrl genpll = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = aon_val(0x0, 2, 1, 0),
+	.reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = sw_ctrl_val(0x10, 31),
+	.ndiv_int = reg_val(0x10, 20, 10),
+	.ndiv_frac = reg_val(0x10, 0, 20),
+	.pdiv = reg_val(0x14, 0, 4),
+	.vco_ctrl = vco_ctrl_val(0x18, 0x1c),
+	.status = reg_val(0x28, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll_clk[] = {
+	[BCM_CYGNUS_GENPLL_AXI21_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_AXI21_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x4, 6, 0, 12),
+		.mdiv = reg_val(0x20, 0, 8),
+	},
+	[BCM_CYGNUS_GENPLL_250MHZ_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_250MHZ_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x4, 7, 1, 13),
+		.mdiv = reg_val(0x20, 10, 8),
+	},
+	[BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x4, 8, 2, 14),
+		.mdiv = reg_val(0x20, 20, 8),
+	},
+	[BCM_CYGNUS_GENPLL_ENET_SW_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x4, 9, 3, 15),
+		.mdiv = reg_val(0x24, 0, 8),
+	},
+	[BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x4, 10, 4, 16),
+		.mdiv = reg_val(0x24, 10, 8),
+	},
+	[BCM_CYGNUS_GENPLL_CAN_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_CAN_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x4, 11, 5, 17),
+		.mdiv = reg_val(0x24, 20, 8),
+	},
+};
+
+static void __init cygnus_genpll_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
+			    ARRAY_SIZE(genpll_clk));
+}
+CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_clk_init);
+
+static const struct iproc_pll_ctrl lcpll0 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = aon_val(0x0, 2, 5, 4),
+	.reset = reset_val(0x0, 31, 30, 27, 3, 23, 4, 19, 4),
+	.sw_ctrl = sw_ctrl_val(0x4, 31),
+	.ndiv_int = reg_val(0x4, 16, 10),
+	.pdiv = reg_val(0x4, 26, 4),
+	.vco_ctrl = vco_ctrl_val(0x10, 0x14),
+	.status = reg_val(0x18, 12, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll0_clk[] = {
+	[BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = {
+		.channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x0, 7, 1, 13),
+		.mdiv = reg_val(0x8, 0, 8),
+	},
+	[BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = {
+		.channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x0, 8, 2, 14),
+		.mdiv = reg_val(0x8, 10, 8),
+	},
+	[BCM_CYGNUS_LCPLL0_SDIO_CLK] = {
+		.channel = BCM_CYGNUS_LCPLL0_SDIO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x0, 9, 3, 15),
+		.mdiv = reg_val(0x8, 20, 8),
+	},
+	[BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = {
+		.channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x0, 10, 4, 16),
+		.mdiv = reg_val(0xc, 0, 8),
+	},
+	[BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = {
+		.channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x0, 11, 5, 17),
+		.mdiv = reg_val(0xc, 10, 8),
+	},
+	[BCM_CYGNUS_LCPLL0_CH5_UNUSED] = {
+		.channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = enable_val(0x0, 12, 6, 18),
+		.mdiv = reg_val(0xc, 20, 8),
+	},
+};
+
+static void __init cygnus_lcpll0_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
+			    ARRAY_SIZE(lcpll0_clk));
+}
+CLK_OF_DECLARE(cygnus_lcpll0, "brcm,cygnus-lcpll0", cygnus_lcpll0_clk_init);
+
+/*
+ * MIPI PLL VCO frequency parameter table
+ */
+static const struct iproc_pll_vco_param mipipll_vco_params[] = {
+	/* rate (Hz) ndiv_int ndiv_frac pdiv */
+	{ 750000000UL,   30,     0,        1 },
+	{ 1000000000UL,  40,     0,        1 },
+	{ 1350000000ul,  54,     0,        1 },
+	{ 2000000000UL,  80,     0,        1 },
+	{ 2100000000UL,  84,     0,        1 },
+	{ 2250000000UL,  90,     0,        1 },
+	{ 2500000000UL,  100,    0,        1 },
+	{ 2700000000UL,  54,     0,        0 },
+	{ 2975000000UL,  119,    0,        1 },
+	{ 3100000000UL,  124,    0,        1 },
+	{ 3150000000UL,  126,    0,        1 },
+};
+
+static const struct iproc_pll_ctrl mipipll = {
+	.flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		 IPROC_CLK_NEEDS_READ_BACK,
+	.aon = aon_val(0x0, 4, 17, 16),
+	.asiu = asiu_gate_val(0x0, 3),
+	.reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 4),
+	.ndiv_int = reg_val(0x10, 20, 10),
+	.ndiv_frac = reg_val(0x10, 0, 20),
+	.pdiv = reg_val(0x14, 0, 4),
+	.vco_ctrl = vco_ctrl_val(0x18, 0x1c),
+	.status = reg_val(0x28, 12, 1),
+};
+
+static const struct iproc_clk_ctrl mipipll_clk[] = {
+	[BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = enable_val(0x4, 12, 6, 18),
+		.mdiv = reg_val(0x20, 0, 8),
+	},
+	[BCM_CYGNUS_MIPIPLL_CH1_LCD] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH1_LCD,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = enable_val(0x4, 13, 7, 19),
+		.mdiv = reg_val(0x20, 10, 8),
+	},
+	[BCM_CYGNUS_MIPIPLL_CH2_V3D] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH2_V3D,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = enable_val(0x4, 14, 8, 20),
+		.mdiv = reg_val(0x20, 20, 8),
+	},
+	[BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = enable_val(0x4, 15, 9, 21),
+		.mdiv = reg_val(0x24, 0, 8),
+	},
+	[BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = enable_val(0x4, 16, 10, 22),
+		.mdiv = reg_val(0x24, 10, 8),
+	},
+	[BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = enable_val(0x4, 17, 11, 23),
+		.mdiv = reg_val(0x24, 20, 8),
+	},
+};
+
+static void __init cygnus_mipipll_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &mipipll, mipipll_vco_params,
+			    ARRAY_SIZE(mipipll_vco_params), mipipll_clk,
+			    ARRAY_SIZE(mipipll_clk));
+}
+CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_clk_init);
+
+static const struct iproc_asiu_div asiu_div[] = {
+	[BCM_CYGNUS_ASIU_KEYPAD_CLK] = asiu_div_val(0x0, 31, 16, 10, 0, 10),
+	[BCM_CYGNUS_ASIU_ADC_CLK] = asiu_div_val(0x4, 31, 16, 10, 0, 10),
+	[BCM_CYGNUS_ASIU_PWM_CLK] = asiu_div_val(0x8, 31, 16, 10, 0, 10),
+};
+
+static const struct iproc_asiu_gate asiu_gate[] = {
+	[BCM_CYGNUS_ASIU_KEYPAD_CLK] = asiu_gate_val(0x0, 7),
+	[BCM_CYGNUS_ASIU_ADC_CLK] = asiu_gate_val(0x0, 9),
+	[BCM_CYGNUS_ASIU_PWM_CLK] = asiu_gate_val(IPROC_CLK_INVALID_OFFSET, 0),
+};
+
+static void __init cygnus_asiu_init(struct device_node *node)
+{
+	iproc_asiu_setup(node, asiu_div, asiu_gate, ARRAY_SIZE(asiu_div));
+}
+CLK_OF_DECLARE(cygnus_asiu_clk, "brcm,cygnus-asiu-clk", cygnus_asiu_init);
diff --git a/drivers/clk/bcm/clk-iproc-armpll.c b/drivers/clk/bcm/clk-iproc-armpll.c
new file mode 100644
index 000000000..a196ee28a
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc-armpll.c
@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+
+#define IPROC_CLK_MAX_FREQ_POLICY                    0x3
+#define IPROC_CLK_POLICY_FREQ_OFFSET                 0x008
+#define IPROC_CLK_POLICY_FREQ_POLICY_FREQ_SHIFT      8
+#define IPROC_CLK_POLICY_FREQ_POLICY_FREQ_MASK       0x7
+
+#define IPROC_CLK_PLLARMA_OFFSET                     0xc00
+#define IPROC_CLK_PLLARMA_LOCK_SHIFT                 28
+#define IPROC_CLK_PLLARMA_PDIV_SHIFT                 24
+#define IPROC_CLK_PLLARMA_PDIV_MASK                  0xf
+#define IPROC_CLK_PLLARMA_NDIV_INT_SHIFT             8
+#define IPROC_CLK_PLLARMA_NDIV_INT_MASK              0x3ff
+
+#define IPROC_CLK_PLLARMB_OFFSET                     0xc04
+#define IPROC_CLK_PLLARMB_NDIV_FRAC_MASK             0xfffff
+
+#define IPROC_CLK_PLLARMC_OFFSET                     0xc08
+#define IPROC_CLK_PLLARMC_BYPCLK_EN_SHIFT            8
+#define IPROC_CLK_PLLARMC_MDIV_MASK                  0xff
+
+#define IPROC_CLK_PLLARMCTL5_OFFSET                  0xc20
+#define IPROC_CLK_PLLARMCTL5_H_MDIV_MASK             0xff
+
+#define IPROC_CLK_PLLARM_OFFSET_OFFSET               0xc24
+#define IPROC_CLK_PLLARM_SW_CTL_SHIFT                29
+#define IPROC_CLK_PLLARM_NDIV_INT_OFFSET_SHIFT       20
+#define IPROC_CLK_PLLARM_NDIV_INT_OFFSET_MASK        0xff
+#define IPROC_CLK_PLLARM_NDIV_FRAC_OFFSET_MASK       0xfffff
+
+#define IPROC_CLK_ARM_DIV_OFFSET                     0xe00
+#define IPROC_CLK_ARM_DIV_PLL_SELECT_OVERRIDE_SHIFT  4
+#define IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_MASK        0xf
+
+#define IPROC_CLK_POLICY_DBG_OFFSET                  0xec0
+#define IPROC_CLK_POLICY_DBG_ACT_FREQ_SHIFT          12
+#define IPROC_CLK_POLICY_DBG_ACT_FREQ_MASK           0x7
+
+enum iproc_arm_pll_fid {
+	ARM_PLL_FID_CRYSTAL_CLK   = 0,
+	ARM_PLL_FID_SYS_CLK       = 2,
+	ARM_PLL_FID_CH0_SLOW_CLK  = 6,
+	ARM_PLL_FID_CH1_FAST_CLK  = 7
+};
+
+struct iproc_arm_pll {
+	struct clk_hw hw;
+	void __iomem *base;
+	unsigned long rate;
+};
+
+#define to_iproc_arm_pll(hw) container_of(hw, struct iproc_arm_pll, hw)
+
+static unsigned int __get_fid(struct iproc_arm_pll *pll)
+{
+	u32 val;
+	unsigned int policy, fid, active_fid;
+
+	val = readl(pll->base + IPROC_CLK_ARM_DIV_OFFSET);
+	if (val & (1 << IPROC_CLK_ARM_DIV_PLL_SELECT_OVERRIDE_SHIFT))
+		policy = val & IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_MASK;
+	else
+		policy = 0;
+
+	/* something is seriously wrong */
+	BUG_ON(policy > IPROC_CLK_MAX_FREQ_POLICY);
+
+	val = readl(pll->base + IPROC_CLK_POLICY_FREQ_OFFSET);
+	fid = (val >> (IPROC_CLK_POLICY_FREQ_POLICY_FREQ_SHIFT * policy)) &
+		IPROC_CLK_POLICY_FREQ_POLICY_FREQ_MASK;
+
+	val = readl(pll->base + IPROC_CLK_POLICY_DBG_OFFSET);
+	active_fid = IPROC_CLK_POLICY_DBG_ACT_FREQ_MASK &
+		(val >> IPROC_CLK_POLICY_DBG_ACT_FREQ_SHIFT);
+	if (fid != active_fid) {
+		pr_debug("%s: fid override %u->%u\n", __func__,	fid,
+				active_fid);
+		fid = active_fid;
+	}
+
+	pr_debug("%s: active fid: %u\n", __func__, fid);
+
+	return fid;
+}
+
+/*
+ * Determine the mdiv (post divider) based on the frequency ID being used.
+ * There are 4 sources that can be used to derive the output clock rate:
+ *    - 25 MHz Crystal
+ *    - System clock
+ *    - PLL channel 0 (slow clock)
+ *    - PLL channel 1 (fast clock)
+ */
+static int __get_mdiv(struct iproc_arm_pll *pll)
+{
+	unsigned int fid;
+	int mdiv;
+	u32 val;
+
+	fid = __get_fid(pll);
+
+	switch (fid) {
+	case ARM_PLL_FID_CRYSTAL_CLK:
+	case ARM_PLL_FID_SYS_CLK:
+		mdiv = 1;
+		break;
+
+	case ARM_PLL_FID_CH0_SLOW_CLK:
+		val = readl(pll->base + IPROC_CLK_PLLARMC_OFFSET);
+		mdiv = val & IPROC_CLK_PLLARMC_MDIV_MASK;
+		if (mdiv == 0)
+			mdiv = 256;
+		break;
+
+	case ARM_PLL_FID_CH1_FAST_CLK:
+		val = readl(pll->base +	IPROC_CLK_PLLARMCTL5_OFFSET);
+		mdiv = val & IPROC_CLK_PLLARMCTL5_H_MDIV_MASK;
+		if (mdiv == 0)
+			mdiv = 256;
+		break;
+
+	default:
+		mdiv = -EFAULT;
+	}
+
+	return mdiv;
+}
+
+static unsigned int __get_ndiv(struct iproc_arm_pll *pll)
+{
+	u32 val;
+	unsigned int ndiv_int, ndiv_frac, ndiv;
+
+	val = readl(pll->base + IPROC_CLK_PLLARM_OFFSET_OFFSET);
+	if (val & (1 << IPROC_CLK_PLLARM_SW_CTL_SHIFT)) {
+		/*
+		 * offset mode is active. Read the ndiv from the PLLARM OFFSET
+		 * register
+		 */
+		ndiv_int = (val >> IPROC_CLK_PLLARM_NDIV_INT_OFFSET_SHIFT) &
+			IPROC_CLK_PLLARM_NDIV_INT_OFFSET_MASK;
+		if (ndiv_int == 0)
+			ndiv_int = 256;
+
+		ndiv_frac = val & IPROC_CLK_PLLARM_NDIV_FRAC_OFFSET_MASK;
+	} else {
+		/* offset mode not active */
+		val = readl(pll->base + IPROC_CLK_PLLARMA_OFFSET);
+		ndiv_int = (val >> IPROC_CLK_PLLARMA_NDIV_INT_SHIFT) &
+			IPROC_CLK_PLLARMA_NDIV_INT_MASK;
+		if (ndiv_int == 0)
+			ndiv_int = 1024;
+
+		val = readl(pll->base + IPROC_CLK_PLLARMB_OFFSET);
+		ndiv_frac = val & IPROC_CLK_PLLARMB_NDIV_FRAC_MASK;
+	}
+
+	ndiv = (ndiv_int << 20) | ndiv_frac;
+
+	return ndiv;
+}
+
+/*
+ * The output frequency of the ARM PLL is calculated based on the ARM PLL
+ * divider values:
+ *   pdiv = ARM PLL pre-divider
+ *   ndiv = ARM PLL multiplier
+ *   mdiv = ARM PLL post divider
+ *
+ * The frequency is calculated by:
+ *   ((ndiv * parent clock rate) / pdiv) / mdiv
+ */
+static unsigned long iproc_arm_pll_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct iproc_arm_pll *pll = to_iproc_arm_pll(hw);
+	u32 val;
+	int mdiv;
+	u64 ndiv;
+	unsigned int pdiv;
+
+	/* in bypass mode, use parent rate */
+	val = readl(pll->base + IPROC_CLK_PLLARMC_OFFSET);
+	if (val & (1 << IPROC_CLK_PLLARMC_BYPCLK_EN_SHIFT)) {
+		pll->rate = parent_rate;
+		return pll->rate;
+	}
+
+	/* PLL needs to be locked */
+	val = readl(pll->base + IPROC_CLK_PLLARMA_OFFSET);
+	if (!(val & (1 << IPROC_CLK_PLLARMA_LOCK_SHIFT))) {
+		pll->rate = 0;
+		return 0;
+	}
+
+	pdiv = (val >> IPROC_CLK_PLLARMA_PDIV_SHIFT) &
+		IPROC_CLK_PLLARMA_PDIV_MASK;
+	if (pdiv == 0)
+		pdiv = 16;
+
+	ndiv = __get_ndiv(pll);
+	mdiv = __get_mdiv(pll);
+	if (mdiv <= 0) {
+		pll->rate = 0;
+		return 0;
+	}
+	pll->rate = (ndiv * parent_rate) >> 20;
+	pll->rate = (pll->rate / pdiv) / mdiv;
+
+	pr_debug("%s: ARM PLL rate: %lu. parent rate: %lu\n", __func__,
+		 pll->rate, parent_rate);
+	pr_debug("%s: ndiv_int: %u, pdiv: %u, mdiv: %d\n", __func__,
+		 (unsigned int)(ndiv >> 20), pdiv, mdiv);
+
+	return pll->rate;
+}
+
+static const struct clk_ops iproc_arm_pll_ops = {
+	.recalc_rate = iproc_arm_pll_recalc_rate,
+};
+
+void __init iproc_armpll_setup(struct device_node *node)
+{
+	int ret;
+	struct clk *clk;
+	struct iproc_arm_pll *pll;
+	struct clk_init_data init;
+	const char *parent_name;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (WARN_ON(!pll))
+		return;
+
+	pll->base = of_iomap(node, 0);
+	if (WARN_ON(!pll->base))
+		goto err_free_pll;
+
+	init.name = node->name;
+	init.ops = &iproc_arm_pll_ops;
+	init.flags = 0;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (WARN_ON(IS_ERR(clk)))
+		goto err_iounmap;
+
+	ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	if (WARN_ON(ret))
+		goto err_clk_unregister;
+
+	return;
+
+err_clk_unregister:
+	clk_unregister(clk);
+err_iounmap:
+	iounmap(pll->base);
+err_free_pll:
+	kfree(pll);
+}
diff --git a/drivers/clk/bcm/clk-iproc-asiu.c b/drivers/clk/bcm/clk-iproc-asiu.c
new file mode 100644
index 000000000..f630e1bbd
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc-asiu.c
@@ -0,0 +1,272 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+
+#include "clk-iproc.h"
+
+struct iproc_asiu;
+
+struct iproc_asiu_clk {
+	struct clk_hw hw;
+	const char *name;
+	struct iproc_asiu *asiu;
+	unsigned long rate;
+	struct iproc_asiu_div div;
+	struct iproc_asiu_gate gate;
+};
+
+struct iproc_asiu {
+	void __iomem *div_base;
+	void __iomem *gate_base;
+
+	struct clk_onecell_data clk_data;
+	struct iproc_asiu_clk *clks;
+};
+
+#define to_asiu_clk(hw) container_of(hw, struct iproc_asiu_clk, hw)
+
+static int iproc_asiu_clk_enable(struct clk_hw *hw)
+{
+	struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+	struct iproc_asiu *asiu = clk->asiu;
+	u32 val;
+
+	/* some clocks at the ASIU level are always enabled */
+	if (clk->gate.offset == IPROC_CLK_INVALID_OFFSET)
+		return 0;
+
+	val = readl(asiu->gate_base + clk->gate.offset);
+	val |= (1 << clk->gate.en_shift);
+	writel(val, asiu->gate_base + clk->gate.offset);
+
+	return 0;
+}
+
+static void iproc_asiu_clk_disable(struct clk_hw *hw)
+{
+	struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+	struct iproc_asiu *asiu = clk->asiu;
+	u32 val;
+
+	/* some clocks at the ASIU level are always enabled */
+	if (clk->gate.offset == IPROC_CLK_INVALID_OFFSET)
+		return;
+
+	val = readl(asiu->gate_base + clk->gate.offset);
+	val &= ~(1 << clk->gate.en_shift);
+	writel(val, asiu->gate_base + clk->gate.offset);
+}
+
+static unsigned long iproc_asiu_clk_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+	struct iproc_asiu *asiu = clk->asiu;
+	u32 val;
+	unsigned int div_h, div_l;
+
+	if (parent_rate == 0) {
+		clk->rate = 0;
+		return 0;
+	}
+
+	/* if clock divisor is not enabled, simply return parent rate */
+	val = readl(asiu->div_base + clk->div.offset);
+	if ((val & (1 << clk->div.en_shift)) == 0) {
+		clk->rate = parent_rate;
+		return parent_rate;
+	}
+
+	/* clock rate = parent rate / (high_div + 1) + (low_div + 1) */
+	div_h = (val >> clk->div.high_shift) & bit_mask(clk->div.high_width);
+	div_h++;
+	div_l = (val >> clk->div.low_shift) & bit_mask(clk->div.low_width);
+	div_l++;
+
+	clk->rate = parent_rate / (div_h + div_l);
+	pr_debug("%s: rate: %lu. parent rate: %lu div_h: %u div_l: %u\n",
+		 __func__, clk->rate, parent_rate, div_h, div_l);
+
+	return clk->rate;
+}
+
+static long iproc_asiu_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *parent_rate)
+{
+	unsigned int div;
+
+	if (rate == 0 || *parent_rate == 0)
+		return -EINVAL;
+
+	if (rate == *parent_rate)
+		return *parent_rate;
+
+	div = DIV_ROUND_UP(*parent_rate, rate);
+	if (div < 2)
+		return *parent_rate;
+
+	return *parent_rate / div;
+}
+
+static int iproc_asiu_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+	struct iproc_asiu *asiu = clk->asiu;
+	unsigned int div, div_h, div_l;
+	u32 val;
+
+	if (rate == 0 || parent_rate == 0)
+		return -EINVAL;
+
+	/* simply disable the divisor if one wants the same rate as parent */
+	if (rate == parent_rate) {
+		val = readl(asiu->div_base + clk->div.offset);
+		val &= ~(1 << clk->div.en_shift);
+		writel(val, asiu->div_base + clk->div.offset);
+		return 0;
+	}
+
+	div = DIV_ROUND_UP(parent_rate, rate);
+	if (div < 2)
+		return -EINVAL;
+
+	div_h = div_l = div >> 1;
+	div_h--;
+	div_l--;
+
+	val = readl(asiu->div_base + clk->div.offset);
+	val |= 1 << clk->div.en_shift;
+	if (div_h) {
+		val &= ~(bit_mask(clk->div.high_width)
+			 << clk->div.high_shift);
+		val |= div_h << clk->div.high_shift;
+	} else {
+		val &= ~(bit_mask(clk->div.high_width)
+			 << clk->div.high_shift);
+	}
+	if (div_l) {
+		val &= ~(bit_mask(clk->div.low_width) << clk->div.low_shift);
+		val |= div_l << clk->div.low_shift;
+	} else {
+		val &= ~(bit_mask(clk->div.low_width) << clk->div.low_shift);
+	}
+	writel(val, asiu->div_base + clk->div.offset);
+
+	return 0;
+}
+
+static const struct clk_ops iproc_asiu_ops = {
+	.enable = iproc_asiu_clk_enable,
+	.disable = iproc_asiu_clk_disable,
+	.recalc_rate = iproc_asiu_clk_recalc_rate,
+	.round_rate = iproc_asiu_clk_round_rate,
+	.set_rate = iproc_asiu_clk_set_rate,
+};
+
+void __init iproc_asiu_setup(struct device_node *node,
+			     const struct iproc_asiu_div *div,
+			     const struct iproc_asiu_gate *gate,
+			     unsigned int num_clks)
+{
+	int i, ret;
+	struct iproc_asiu *asiu;
+
+	if (WARN_ON(!gate || !div))
+		return;
+
+	asiu = kzalloc(sizeof(*asiu), GFP_KERNEL);
+	if (WARN_ON(!asiu))
+		return;
+
+	asiu->clk_data.clk_num = num_clks;
+	asiu->clk_data.clks = kcalloc(num_clks, sizeof(*asiu->clk_data.clks),
+				      GFP_KERNEL);
+	if (WARN_ON(!asiu->clk_data.clks))
+		goto err_clks;
+
+	asiu->clks = kcalloc(num_clks, sizeof(*asiu->clks), GFP_KERNEL);
+	if (WARN_ON(!asiu->clks))
+		goto err_asiu_clks;
+
+	asiu->div_base = of_iomap(node, 0);
+	if (WARN_ON(!asiu->div_base))
+		goto err_iomap_div;
+
+	asiu->gate_base = of_iomap(node, 1);
+	if (WARN_ON(!asiu->gate_base))
+		goto err_iomap_gate;
+
+	for (i = 0; i < num_clks; i++) {
+		struct clk_init_data init;
+		struct clk *clk;
+		const char *parent_name;
+		struct iproc_asiu_clk *asiu_clk;
+		const char *clk_name;
+
+		ret = of_property_read_string_index(node, "clock-output-names",
+						    i, &clk_name);
+		if (WARN_ON(ret))
+			goto err_clk_register;
+
+		asiu_clk = &asiu->clks[i];
+		asiu_clk->name = clk_name;
+		asiu_clk->asiu = asiu;
+		asiu_clk->div = div[i];
+		asiu_clk->gate = gate[i];
+		init.name = clk_name;
+		init.ops = &iproc_asiu_ops;
+		init.flags = 0;
+		parent_name = of_clk_get_parent_name(node, 0);
+		init.parent_names = (parent_name ? &parent_name : NULL);
+		init.num_parents = (parent_name ? 1 : 0);
+		asiu_clk->hw.init = &init;
+
+		clk = clk_register(NULL, &asiu_clk->hw);
+		if (WARN_ON(IS_ERR(clk)))
+			goto err_clk_register;
+		asiu->clk_data.clks[i] = clk;
+	}
+
+	ret = of_clk_add_provider(node, of_clk_src_onecell_get,
+				  &asiu->clk_data);
+	if (WARN_ON(ret))
+		goto err_clk_register;
+
+	return;
+
+err_clk_register:
+	for (i = 0; i < num_clks; i++)
+		clk_unregister(asiu->clk_data.clks[i]);
+	iounmap(asiu->gate_base);
+
+err_iomap_gate:
+	iounmap(asiu->div_base);
+
+err_iomap_div:
+	kfree(asiu->clks);
+
+err_asiu_clks:
+	kfree(asiu->clk_data.clks);
+
+err_clks:
+	kfree(asiu);
+}
diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c
new file mode 100644
index 000000000..2dda4e829
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc-pll.c
@@ -0,0 +1,711 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+
+#include "clk-iproc.h"
+
+#define PLL_VCO_HIGH_SHIFT 19
+#define PLL_VCO_LOW_SHIFT  30
+
+/* number of delay loops waiting for PLL to lock */
+#define LOCK_DELAY 100
+
+/* number of VCO frequency bands */
+#define NUM_FREQ_BANDS 8
+
+#define NUM_KP_BANDS 3
+enum kp_band {
+	KP_BAND_MID = 0,
+	KP_BAND_HIGH,
+	KP_BAND_HIGH_HIGH
+};
+
+static const unsigned int kp_table[NUM_KP_BANDS][NUM_FREQ_BANDS] = {
+	{ 5, 6, 6, 7, 7, 8, 9, 10 },
+	{ 4, 4, 5, 5, 6, 7, 8, 9  },
+	{ 4, 5, 5, 6, 7, 8, 9, 10 },
+};
+
+static const unsigned long ref_freq_table[NUM_FREQ_BANDS][2] = {
+	{ 10000000,  12500000  },
+	{ 12500000,  15000000  },
+	{ 15000000,  20000000  },
+	{ 20000000,  25000000  },
+	{ 25000000,  50000000  },
+	{ 50000000,  75000000  },
+	{ 75000000,  100000000 },
+	{ 100000000, 125000000 },
+};
+
+enum vco_freq_range {
+	VCO_LOW       = 700000000U,
+	VCO_MID       = 1200000000U,
+	VCO_HIGH      = 2200000000U,
+	VCO_HIGH_HIGH = 3100000000U,
+	VCO_MAX       = 4000000000U,
+};
+
+struct iproc_pll;
+
+struct iproc_clk {
+	struct clk_hw hw;
+	const char *name;
+	struct iproc_pll *pll;
+	unsigned long rate;
+	const struct iproc_clk_ctrl *ctrl;
+};
+
+struct iproc_pll {
+	void __iomem *pll_base;
+	void __iomem *pwr_base;
+	void __iomem *asiu_base;
+
+	const struct iproc_pll_ctrl *ctrl;
+	const struct iproc_pll_vco_param *vco_param;
+	unsigned int num_vco_entries;
+
+	struct clk_onecell_data clk_data;
+	struct iproc_clk *clks;
+};
+
+#define to_iproc_clk(hw) container_of(hw, struct iproc_clk, hw)
+
+/*
+ * Based on the target frequency, find a match from the VCO frequency parameter
+ * table and return its index
+ */
+static int pll_get_rate_index(struct iproc_pll *pll, unsigned int target_rate)
+{
+	int i;
+
+	for (i = 0; i < pll->num_vco_entries; i++)
+		if (target_rate == pll->vco_param[i].rate)
+			break;
+
+	if (i >= pll->num_vco_entries)
+		return -EINVAL;
+
+	return i;
+}
+
+static int get_kp(unsigned long ref_freq, enum kp_band kp_index)
+{
+	int i;
+
+	if (ref_freq < ref_freq_table[0][0])
+		return -EINVAL;
+
+	for (i = 0; i < NUM_FREQ_BANDS; i++) {
+		if (ref_freq >= ref_freq_table[i][0] &&
+		    ref_freq < ref_freq_table[i][1])
+			return kp_table[kp_index][i];
+	}
+	return -EINVAL;
+}
+
+static int pll_wait_for_lock(struct iproc_pll *pll)
+{
+	int i;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	for (i = 0; i < LOCK_DELAY; i++) {
+		u32 val = readl(pll->pll_base + ctrl->status.offset);
+
+		if (val & (1 << ctrl->status.shift))
+			return 0;
+		udelay(10);
+	}
+
+	return -EIO;
+}
+
+static void __pll_disable(struct iproc_pll *pll)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	u32 val;
+
+	if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+		val = readl(pll->asiu_base + ctrl->asiu.offset);
+		val &= ~(1 << ctrl->asiu.en_shift);
+		writel(val, pll->asiu_base + ctrl->asiu.offset);
+	}
+
+	/* latch input value so core power can be shut down */
+	val = readl(pll->pwr_base + ctrl->aon.offset);
+	val |= (1 << ctrl->aon.iso_shift);
+	writel(val, pll->pwr_base + ctrl->aon.offset);
+
+	/* power down the core */
+	val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+	writel(val, pll->pwr_base + ctrl->aon.offset);
+}
+
+static int __pll_enable(struct iproc_pll *pll)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	u32 val;
+
+	/* power up the PLL and make sure it's not latched */
+	val = readl(pll->pwr_base + ctrl->aon.offset);
+	val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
+	val &= ~(1 << ctrl->aon.iso_shift);
+	writel(val, pll->pwr_base + ctrl->aon.offset);
+
+	/* certain PLLs also need to be ungated from the ASIU top level */
+	if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+		val = readl(pll->asiu_base + ctrl->asiu.offset);
+		val |= (1 << ctrl->asiu.en_shift);
+		writel(val, pll->asiu_base + ctrl->asiu.offset);
+	}
+
+	return 0;
+}
+
+static void __pll_put_in_reset(struct iproc_pll *pll)
+{
+	u32 val;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
+
+	val = readl(pll->pll_base + reset->offset);
+	val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift);
+	writel(val, pll->pll_base + reset->offset);
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+		readl(pll->pll_base + reset->offset);
+}
+
+static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
+				  unsigned int ka, unsigned int ki)
+{
+	u32 val;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
+
+	val = readl(pll->pll_base + reset->offset);
+	val &= ~(bit_mask(reset->ki_width) << reset->ki_shift |
+		 bit_mask(reset->kp_width) << reset->kp_shift |
+		 bit_mask(reset->ka_width) << reset->ka_shift);
+	val |=  ki << reset->ki_shift | kp << reset->kp_shift |
+		ka << reset->ka_shift;
+	val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
+	writel(val, pll->pll_base + reset->offset);
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+		readl(pll->pll_base + reset->offset);
+}
+
+static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
+			unsigned long parent_rate)
+{
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_vco_param *vco = &pll->vco_param[rate_index];
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	int ka = 0, ki, kp, ret;
+	unsigned long rate = vco->rate;
+	u32 val;
+	enum kp_band kp_index;
+	unsigned long ref_freq;
+
+	/*
+	 * reference frequency = parent frequency / PDIV
+	 * If PDIV = 0, then it becomes a multiplier (x2)
+	 */
+	if (vco->pdiv == 0)
+		ref_freq = parent_rate * 2;
+	else
+		ref_freq = parent_rate / vco->pdiv;
+
+	/* determine Ki and Kp index based on target VCO frequency */
+	if (rate >= VCO_LOW && rate < VCO_HIGH) {
+		ki = 4;
+		kp_index = KP_BAND_MID;
+	} else if (rate >= VCO_HIGH && rate && rate < VCO_HIGH_HIGH) {
+		ki = 3;
+		kp_index = KP_BAND_HIGH;
+	} else if (rate >= VCO_HIGH_HIGH && rate < VCO_MAX) {
+		ki = 3;
+		kp_index = KP_BAND_HIGH_HIGH;
+	} else {
+		pr_err("%s: pll: %s has invalid rate: %lu\n", __func__,
+				clk->name, rate);
+		return -EINVAL;
+	}
+
+	kp = get_kp(ref_freq, kp_index);
+	if (kp < 0) {
+		pr_err("%s: pll: %s has invalid kp\n", __func__, clk->name);
+		return kp;
+	}
+
+	ret = __pll_enable(pll);
+	if (ret) {
+		pr_err("%s: pll: %s fails to enable\n", __func__, clk->name);
+		return ret;
+	}
+
+	/* put PLL in reset */
+	__pll_put_in_reset(pll);
+
+	writel(0, pll->pll_base + ctrl->vco_ctrl.u_offset);
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+		readl(pll->pll_base + ctrl->vco_ctrl.u_offset);
+	val = readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
+
+	if (rate >= VCO_LOW && rate < VCO_MID)
+		val |= (1 << PLL_VCO_LOW_SHIFT);
+
+	if (rate < VCO_HIGH)
+		val &= ~(1 << PLL_VCO_HIGH_SHIFT);
+	else
+		val |= (1 << PLL_VCO_HIGH_SHIFT);
+
+	writel(val, pll->pll_base + ctrl->vco_ctrl.l_offset);
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+		readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
+
+	/* program integer part of NDIV */
+	val = readl(pll->pll_base + ctrl->ndiv_int.offset);
+	val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift);
+	val |= vco->ndiv_int << ctrl->ndiv_int.shift;
+	writel(val, pll->pll_base + ctrl->ndiv_int.offset);
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+		readl(pll->pll_base + ctrl->ndiv_int.offset);
+
+	/* program fractional part of NDIV */
+	if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+		val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
+		val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
+			 ctrl->ndiv_frac.shift);
+		val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
+		writel(val, pll->pll_base + ctrl->ndiv_frac.offset);
+		if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+			readl(pll->pll_base + ctrl->ndiv_frac.offset);
+	}
+
+	/* program PDIV */
+	val = readl(pll->pll_base + ctrl->pdiv.offset);
+	val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift);
+	val |= vco->pdiv << ctrl->pdiv.shift;
+	writel(val, pll->pll_base + ctrl->pdiv.offset);
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+		readl(pll->pll_base + ctrl->pdiv.offset);
+
+	__pll_bring_out_reset(pll, kp, ka, ki);
+
+	ret = pll_wait_for_lock(pll);
+	if (ret < 0) {
+		pr_err("%s: pll: %s failed to lock\n", __func__, clk->name);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int iproc_pll_enable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+
+	return __pll_enable(pll);
+}
+
+static void iproc_pll_disable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	if (ctrl->flags & IPROC_CLK_AON)
+		return;
+
+	__pll_disable(pll);
+}
+
+static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	u32 val;
+	u64 ndiv;
+	unsigned int ndiv_int, ndiv_frac, pdiv;
+
+	if (parent_rate == 0)
+		return 0;
+
+	/* PLL needs to be locked */
+	val = readl(pll->pll_base + ctrl->status.offset);
+	if ((val & (1 << ctrl->status.shift)) == 0) {
+		clk->rate = 0;
+		return 0;
+	}
+
+	/*
+	 * PLL output frequency =
+	 *
+	 * ((ndiv_int + ndiv_frac / 2^20) * (parent clock rate / pdiv)
+	 */
+	val = readl(pll->pll_base + ctrl->ndiv_int.offset);
+	ndiv_int = (val >> ctrl->ndiv_int.shift) &
+		bit_mask(ctrl->ndiv_int.width);
+	ndiv = (u64)ndiv_int << ctrl->ndiv_int.shift;
+
+	if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+		val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
+		ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
+			bit_mask(ctrl->ndiv_frac.width);
+
+		if (ndiv_frac != 0)
+			ndiv = ((u64)ndiv_int << ctrl->ndiv_int.shift) |
+				ndiv_frac;
+	}
+
+	val = readl(pll->pll_base + ctrl->pdiv.offset);
+	pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
+
+	clk->rate = (ndiv * parent_rate) >> ctrl->ndiv_int.shift;
+
+	if (pdiv == 0)
+		clk->rate *= 2;
+	else
+		clk->rate /= pdiv;
+
+	return clk->rate;
+}
+
+static long iproc_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *parent_rate)
+{
+	unsigned i;
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+
+	if (rate == 0 || *parent_rate == 0 || !pll->vco_param)
+		return -EINVAL;
+
+	for (i = 0; i < pll->num_vco_entries; i++) {
+		if (rate <= pll->vco_param[i].rate)
+			break;
+	}
+
+	if (i == pll->num_vco_entries)
+		i--;
+
+	return pll->vco_param[i].rate;
+}
+
+static int iproc_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+	int rate_index, ret;
+
+	rate_index = pll_get_rate_index(pll, rate);
+	if (rate_index < 0)
+		return rate_index;
+
+	ret = pll_set_rate(clk, rate_index, parent_rate);
+	return ret;
+}
+
+static const struct clk_ops iproc_pll_ops = {
+	.enable = iproc_pll_enable,
+	.disable = iproc_pll_disable,
+	.recalc_rate = iproc_pll_recalc_rate,
+	.round_rate = iproc_pll_round_rate,
+	.set_rate = iproc_pll_set_rate,
+};
+
+static int iproc_clk_enable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+
+	/* channel enable is active low */
+	val = readl(pll->pll_base + ctrl->enable.offset);
+	val &= ~(1 << ctrl->enable.enable_shift);
+	writel(val, pll->pll_base + ctrl->enable.offset);
+
+	/* also make sure channel is not held */
+	val = readl(pll->pll_base + ctrl->enable.offset);
+	val &= ~(1 << ctrl->enable.hold_shift);
+	writel(val, pll->pll_base + ctrl->enable.offset);
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+		readl(pll->pll_base + ctrl->enable.offset);
+
+	return 0;
+}
+
+static void iproc_clk_disable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+
+	if (ctrl->flags & IPROC_CLK_AON)
+		return;
+
+	val = readl(pll->pll_base + ctrl->enable.offset);
+	val |= 1 << ctrl->enable.enable_shift;
+	writel(val, pll->pll_base + ctrl->enable.offset);
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+		readl(pll->pll_base + ctrl->enable.offset);
+}
+
+static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+	unsigned int mdiv;
+
+	if (parent_rate == 0)
+		return 0;
+
+	val = readl(pll->pll_base + ctrl->mdiv.offset);
+	mdiv = (val >> ctrl->mdiv.shift) & bit_mask(ctrl->mdiv.width);
+	if (mdiv == 0)
+		mdiv = 256;
+
+	clk->rate = parent_rate / mdiv;
+
+	return clk->rate;
+}
+
+static long iproc_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *parent_rate)
+{
+	unsigned int div;
+
+	if (rate == 0 || *parent_rate == 0)
+		return -EINVAL;
+
+	if (rate == *parent_rate)
+		return *parent_rate;
+
+	div = DIV_ROUND_UP(*parent_rate, rate);
+	if (div < 2)
+		return *parent_rate;
+
+	if (div > 256)
+		div = 256;
+
+	return *parent_rate / div;
+}
+
+static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+	unsigned int div;
+
+	if (rate == 0 || parent_rate == 0)
+		return -EINVAL;
+
+	div = DIV_ROUND_UP(parent_rate, rate);
+	if (div > 256)
+		return -EINVAL;
+
+	val = readl(pll->pll_base + ctrl->mdiv.offset);
+	if (div == 256) {
+		val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
+	} else {
+		val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
+		val |= div << ctrl->mdiv.shift;
+	}
+	writel(val, pll->pll_base + ctrl->mdiv.offset);
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+		readl(pll->pll_base + ctrl->mdiv.offset);
+	clk->rate = parent_rate / div;
+
+	return 0;
+}
+
+static const struct clk_ops iproc_clk_ops = {
+	.enable = iproc_clk_enable,
+	.disable = iproc_clk_disable,
+	.recalc_rate = iproc_clk_recalc_rate,
+	.round_rate = iproc_clk_round_rate,
+	.set_rate = iproc_clk_set_rate,
+};
+
+/**
+ * Some PLLs require the PLL SW override bit to be set before changes can be
+ * applied to the PLL
+ */
+static void iproc_pll_sw_cfg(struct iproc_pll *pll)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	if (ctrl->flags & IPROC_CLK_PLL_NEEDS_SW_CFG) {
+		u32 val;
+
+		val = readl(pll->pll_base + ctrl->sw_ctrl.offset);
+		val |= BIT(ctrl->sw_ctrl.shift);
+		writel(val, pll->pll_base + ctrl->sw_ctrl.offset);
+		if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+			readl(pll->pll_base + ctrl->sw_ctrl.offset);
+	}
+}
+
+void __init iproc_pll_clk_setup(struct device_node *node,
+				const struct iproc_pll_ctrl *pll_ctrl,
+				const struct iproc_pll_vco_param *vco,
+				unsigned int num_vco_entries,
+				const struct iproc_clk_ctrl *clk_ctrl,
+				unsigned int num_clks)
+{
+	int i, ret;
+	struct clk *clk;
+	struct iproc_pll *pll;
+	struct iproc_clk *iclk;
+	struct clk_init_data init;
+	const char *parent_name;
+
+	if (WARN_ON(!pll_ctrl) || WARN_ON(!clk_ctrl))
+		return;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (WARN_ON(!pll))
+		return;
+
+	pll->clk_data.clk_num = num_clks;
+	pll->clk_data.clks = kcalloc(num_clks, sizeof(*pll->clk_data.clks),
+				     GFP_KERNEL);
+	if (WARN_ON(!pll->clk_data.clks))
+		goto err_clk_data;
+
+	pll->clks = kcalloc(num_clks, sizeof(*pll->clks), GFP_KERNEL);
+	if (WARN_ON(!pll->clks))
+		goto err_clks;
+
+	pll->pll_base = of_iomap(node, 0);
+	if (WARN_ON(!pll->pll_base))
+		goto err_pll_iomap;
+
+	pll->pwr_base = of_iomap(node, 1);
+	if (WARN_ON(!pll->pwr_base))
+		goto err_pwr_iomap;
+
+	/* some PLLs require gating control at the top ASIU level */
+	if (pll_ctrl->flags & IPROC_CLK_PLL_ASIU) {
+		pll->asiu_base = of_iomap(node, 2);
+		if (WARN_ON(!pll->asiu_base))
+			goto err_asiu_iomap;
+	}
+
+	/* initialize and register the PLL itself */
+	pll->ctrl = pll_ctrl;
+
+	iclk = &pll->clks[0];
+	iclk->pll = pll;
+	iclk->name = node->name;
+
+	init.name = node->name;
+	init.ops = &iproc_pll_ops;
+	init.flags = 0;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+	iclk->hw.init = &init;
+
+	if (vco) {
+		pll->num_vco_entries = num_vco_entries;
+		pll->vco_param = vco;
+	}
+
+	iproc_pll_sw_cfg(pll);
+
+	clk = clk_register(NULL, &iclk->hw);
+	if (WARN_ON(IS_ERR(clk)))
+		goto err_pll_register;
+
+	pll->clk_data.clks[0] = clk;
+
+	/* now initialize and register all leaf clocks */
+	for (i = 1; i < num_clks; i++) {
+		const char *clk_name;
+
+		memset(&init, 0, sizeof(init));
+		parent_name = node->name;
+
+		ret = of_property_read_string_index(node, "clock-output-names",
+						    i, &clk_name);
+		if (WARN_ON(ret))
+			goto err_clk_register;
+
+		iclk = &pll->clks[i];
+		iclk->name = clk_name;
+		iclk->pll = pll;
+		iclk->ctrl = &clk_ctrl[i];
+
+		init.name = clk_name;
+		init.ops = &iproc_clk_ops;
+		init.flags = 0;
+		init.parent_names = (parent_name ? &parent_name : NULL);
+		init.num_parents = (parent_name ? 1 : 0);
+		iclk->hw.init = &init;
+
+		clk = clk_register(NULL, &iclk->hw);
+		if (WARN_ON(IS_ERR(clk)))
+			goto err_clk_register;
+
+		pll->clk_data.clks[i] = clk;
+	}
+
+	ret = of_clk_add_provider(node, of_clk_src_onecell_get, &pll->clk_data);
+	if (WARN_ON(ret))
+		goto err_clk_register;
+
+	return;
+
+err_clk_register:
+	for (i = 0; i < num_clks; i++)
+		clk_unregister(pll->clk_data.clks[i]);
+
+err_pll_register:
+	if (pll->asiu_base)
+		iounmap(pll->asiu_base);
+
+err_asiu_iomap:
+	iounmap(pll->pwr_base);
+
+err_pwr_iomap:
+	iounmap(pll->pll_base);
+
+err_pll_iomap:
+	kfree(pll->clks);
+
+err_clks:
+	kfree(pll->clk_data.clks);
+
+err_clk_data:
+	kfree(pll);
+}
diff --git a/drivers/clk/bcm/clk-iproc.h b/drivers/clk/bcm/clk-iproc.h
new file mode 100644
index 000000000..d834b7abd
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CLK_IPROC_H
+#define _CLK_IPROC_H
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+
+#define IPROC_CLK_NAME_LEN 25
+#define IPROC_CLK_INVALID_OFFSET 0xffffffff
+#define bit_mask(width) ((1 << (width)) - 1)
+
+/* clocks that should not be disabled at runtime */
+#define IPROC_CLK_AON BIT(0)
+
+/* PLL that requires gating through ASIU */
+#define IPROC_CLK_PLL_ASIU BIT(1)
+
+/* PLL that has fractional part of the NDIV */
+#define IPROC_CLK_PLL_HAS_NDIV_FRAC BIT(2)
+
+/*
+ * Some of the iProc PLL/clocks may have an ASIC bug that requires read back
+ * of the same register following the write to flush the write transaction into
+ * the intended register
+ */
+#define IPROC_CLK_NEEDS_READ_BACK BIT(3)
+
+/*
+ * Some PLLs require the PLL SW override bit to be set before changes can be
+ * applied to the PLL
+ */
+#define IPROC_CLK_PLL_NEEDS_SW_CFG BIT(4)
+
+/*
+ * Parameters for VCO frequency configuration
+ *
+ * VCO frequency =
+ * ((ndiv_int + ndiv_frac / 2^20) * (ref freqeuncy  / pdiv)
+ */
+struct iproc_pll_vco_param {
+	unsigned long rate;
+	unsigned int ndiv_int;
+	unsigned int ndiv_frac;
+	unsigned int pdiv;
+};
+
+struct iproc_clk_reg_op {
+	unsigned int offset;
+	unsigned int shift;
+	unsigned int width;
+};
+
+/*
+ * Clock gating control at the top ASIU level
+ */
+struct iproc_asiu_gate {
+	unsigned int offset;
+	unsigned int en_shift;
+};
+
+/*
+ * Control of powering on/off of a PLL
+ *
+ * Before powering off a PLL, input isolation (ISO) needs to be enabled
+ */
+struct iproc_pll_aon_pwr_ctrl {
+	unsigned int offset;
+	unsigned int pwr_width;
+	unsigned int pwr_shift;
+	unsigned int iso_shift;
+};
+
+/*
+ * Control of the PLL reset, with Ki, Kp, and Ka parameters
+ */
+struct iproc_pll_reset_ctrl {
+	unsigned int offset;
+	unsigned int reset_shift;
+	unsigned int p_reset_shift;
+	unsigned int ki_shift;
+	unsigned int ki_width;
+	unsigned int kp_shift;
+	unsigned int kp_width;
+	unsigned int ka_shift;
+	unsigned int ka_width;
+};
+
+/*
+ * To enable SW control of the PLL
+ */
+struct iproc_pll_sw_ctrl {
+	unsigned int offset;
+	unsigned int shift;
+};
+
+struct iproc_pll_vco_ctrl {
+	unsigned int u_offset;
+	unsigned int l_offset;
+};
+
+/*
+ * Main PLL control parameters
+ */
+struct iproc_pll_ctrl {
+	unsigned long flags;
+	struct iproc_pll_aon_pwr_ctrl aon;
+	struct iproc_asiu_gate asiu;
+	struct iproc_pll_reset_ctrl reset;
+	struct iproc_pll_sw_ctrl sw_ctrl;
+	struct iproc_clk_reg_op ndiv_int;
+	struct iproc_clk_reg_op ndiv_frac;
+	struct iproc_clk_reg_op pdiv;
+	struct iproc_pll_vco_ctrl vco_ctrl;
+	struct iproc_clk_reg_op status;
+};
+
+/*
+ * Controls enabling/disabling a PLL derived clock
+ */
+struct iproc_clk_enable_ctrl {
+	unsigned int offset;
+	unsigned int enable_shift;
+	unsigned int hold_shift;
+	unsigned int bypass_shift;
+};
+
+/*
+ * Main clock control parameters for clocks derived from the PLLs
+ */
+struct iproc_clk_ctrl {
+	unsigned int channel;
+	unsigned long flags;
+	struct iproc_clk_enable_ctrl enable;
+	struct iproc_clk_reg_op mdiv;
+};
+
+/*
+ * Divisor of the ASIU clocks
+ */
+struct iproc_asiu_div {
+	unsigned int offset;
+	unsigned int en_shift;
+	unsigned int high_shift;
+	unsigned int high_width;
+	unsigned int low_shift;
+	unsigned int low_width;
+};
+
+void __init iproc_armpll_setup(struct device_node *node);
+void __init iproc_pll_clk_setup(struct device_node *node,
+				const struct iproc_pll_ctrl *pll_ctrl,
+				const struct iproc_pll_vco_param *vco,
+				unsigned int num_vco_entries,
+				const struct iproc_clk_ctrl *clk_ctrl,
+				unsigned int num_clks);
+void __init iproc_asiu_setup(struct device_node *node,
+			     const struct iproc_asiu_div *div,
+			     const struct iproc_asiu_gate *gate,
+			     unsigned int num_clks);
+
+#endif /* _CLK_IPROC_H */
diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c
index e5aededdd..deaa7f962 100644
--- a/drivers/clk/bcm/clk-kona-setup.c
+++ b/drivers/clk/bcm/clk-kona-setup.c
@@ -21,8 +21,6 @@
 #define selector_clear_exists(sel)	((sel)->width = 0)
 #define trigger_clear_exists(trig)	FLAG_CLEAR(trig, TRIG, EXISTS)
 
-LIST_HEAD(ccu_list);	/* The list of set up CCUs */
-
 /* Validity checking */
 
 static bool ccu_data_offsets_valid(struct ccu_data *ccu)
@@ -773,7 +771,6 @@ static void kona_ccu_teardown(struct ccu_data *ccu)
 
 	of_clk_del_provider(ccu->node);	/* safe if never added */
 	ccu_clks_teardown(ccu);
-	list_del(&ccu->links);
 	of_node_put(ccu->node);
 	ccu->node = NULL;
 	iounmap(ccu->base);
@@ -847,7 +844,6 @@ void __init kona_dt_ccu_setup(struct ccu_data *ccu,
 		goto out_err;
 	}
 	ccu->node = of_node_get(node);
-	list_add_tail(&ccu->links, &ccu_list);
 
 	/*
 	 * Set up each defined kona clock and save the result in
diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
index a0ef4f75d..79a98506c 100644
--- a/drivers/clk/bcm/clk-kona.c
+++ b/drivers/clk/bcm/clk-kona.c
@@ -1240,7 +1240,7 @@ static bool __kona_clk_init(struct kona_clk *bcm_clk)
 	default:
 		BUG();
 	}
-	return -EINVAL;
+	return false;
 }
 
 /* Set a CCU and all its clocks into their desired initial state */
diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h
index 6849a64ba..906576ec9 100644
--- a/drivers/clk/bcm/clk-kona.h
+++ b/drivers/clk/bcm/clk-kona.h
@@ -480,7 +480,6 @@ struct ccu_data {
 	spinlock_t lock;	/* serialization lock */
 	bool write_enabled;	/* write access is currently enabled */
 	struct ccu_policy policy;
-	struct list_head links;	/* for ccu_list */
 	struct device_node *node;
 	struct clk_onecell_data clk_data;
 	const char *name;
@@ -492,7 +491,6 @@ struct ccu_data {
 #define KONA_CCU_COMMON(_prefix, _name, _ccuname)			    \
 	.name		= #_name "_ccu",				    \
 	.lock		= __SPIN_LOCK_UNLOCKED(_name ## _ccu_data.lock),    \
-	.links		= LIST_HEAD_INIT(_name ## _ccu_data.links),	    \
 	.clk_data	= {						    \
 		.clk_num = _prefix ## _ ## _ccuname ## _CCU_CLOCK_COUNT,    \
 	}